3.0 Concrete Works And Laboratory
3.1 Conduct standard testing for concrete material, fresh
concrete and hardened concrete.
3.1.1 Carry out standard test for quality of cement
(Softening Point Test).
3.1.2 Carry out standard test for quality and properties of
sand (Sand Segregation Test (Fine Aggregate)).
3.1.3 Carry out standard test for properties of course
aggregate a. Sieve Analysis Test (Coarse Aggregate).
3.1.4 Carry out standard test on workability of fresh
concrete (Slump Test).
3.1.5 Carry out standard testing to determine the strength
of hardened concrete (Compressive Strength Test
Cubes).
3.1.6 Use the right tools and equipment to obtain yield
result.
3.1.7 Carry out test correctly according to safety and
health procedure.
3.1.8 Accomplish the test within a given time frame.
3.2 Demonstrate active participation and cooperation
within a group.
3.2.1 Complete specific task within a group to complete
laboratory work in a given time.
6
2
3.2.2 Perform actively to complete the task and result.
2.0 Brickworks
2.1 Conduct various types of arrangement for brick wall
and finishing work; Bri
2.1.1 Identify the concept of brick and finishing work.
2.1.2 Carry out the brickwork arrangement and finishing
work;
a. Stretcher Bond.
b. English Bond. C
Wo
c. Flemish Bond. La
7
18/04/2022
- d. Wall plastering.
24/04/2022
2.1.3 Use the right tools and equipment to produce
cement mortar and construct various types of brick wall.
2.1.4 Use the right tools to gain the correct measurement
for brickwork arrangement.
2.1.5 Carry out brickwork correctly according to safety
and health procedure.
2.1.6 Accomplish the brickwork within a given time frame.
2.2 Work within a group and show ability to work in team
to complete assigned tasks during practical work
sessions.
6
Project Project practical
activities
2.0 PLO5
ickworks
PLO9
CLO2
CLO3
3.0 Workshop
Concrete activities Workshop practical
orks And SYN
aboratory
ASYN
CLO1
CLO3
3
2.2.1 Show active participation and cooperation within a
group.
2.2.2 Distribute specific task to each member in group to
complete laboratory work in a given time.
2.2.3 Perform actively in a group to complete the task.
3.0 Concrete Works And Laboratory
3.1 Conduct standard testing for concrete material, fresh
concrete and hardened concrete.
3.1.1 Carry out standard test for quality of cement
(Softening Point Test).
3.1.2 Carry out standard test for quality and properties of
sand (Sand Segregation Test (Fine Aggregate)).
3.1.3 Carry out standard test for properties of course
aggregate a. Sieve Analysis Test (Coarse Aggregate).
3.1.4 Carry out standard test on workability of fresh
concrete (Slump Test).
3.1.5 Carry out standard testing to determine the strength
of hardened concrete (Compressive Strength Test
Cubes).
3.1.6 Use the right tools and equipment to obtain yield
result.
3.1.7 Carry out test correctly according to safety and
health procedure.
6
4
3.1.8 Accomplish the test within a given time frame.
3.2 Demonstrate active participation and cooperation
within a group.
3.2.1 Complete specific task within a group to complete
laboratory work in a given time.
3.2.2 Perform actively to complete the task and result.
1.0 Introduction to Civil Engineering Laboratory
1.1 Identify the elements to be considered in the Bri
brickwork and concrete laboratory;
1.1.1 Layout of workshop.
1.1.2 Workshop safety procedures.
1.1.3 Handling of tools.
8
25/04/2022
-
01/05/2022
C
Wo
La
02/05/2022 CUTI PERTE
-
08/05/2022
1.0 Introduction to Civil Engineering Laboratory
9
09/05/2022 1.2 Recognize the workshop work principles. Bri
- 1.2.1 Procedures to accomplish the given task.
15/05/2022
6
2.0 PLO5 Interactive
ickworks briefing and
discussion
CLO2
3 H-Practical
SYN
ASYN
3.0
Concrete
orks And
aboratory
CLO1
ENGAHAN SEMESTER
2.0 PLO5 Interactive
ickworks briefing and
discussion
5
1.2.2 Handling of materials and machines according to
procedure.
C
Wo
La
2.0 Brickworks
2.1 Conduct various types of arrangement for brick wall
and finishing work; Bri
2.1.1 Identify the concept of brick and finishing work.
2.1.2 Carry out the brickwork arrangement and finishing C
work; Wo
10 La
16/05/2022 a. Stretcher Bond.
-
22/05/2022
b. English Bond.
c. Flemish Bond.
d. Wall plastering.
2.1.3 Use the right tools and equipment to produce
cement mortar and construct various types of brick wall.
6
CLO2 SYN
ASYN
3.0
Concrete
orks And
aboratory
CLO1
Project Project practical
activities
2.0 PLO5
ickworks
PLO9
CLO2
CLO3
3.0 Workshop
Concrete activities Workshop practical
orks And SYN
aboratory
ASYN
CLO1
CLO3
6
2.1.4 Use the right tools to gain the correct measurement
for brickwork arrangement.
2.1.5 Carry out brickwork correctly according to safety
and health procedure.
2.1.6 Accomplish the brickwork within a given time frame.
2.2 Work within a group and show ability to work in team
to complete assigned tasks during practical work
sessions.
2.2.1 Show active participation and cooperation within a
group.
2.2.2 Distribute specific task to each member in group to
complete laboratory work in a given time.
2.2.3 Perform actively in a group to complete the task.
3.0 Concrete Works And Laboratory
3.1 Conduct standard testing for concrete material, fresh
concrete and hardened concrete.
3.1.1 Carry out standard test for quality of cement
(Softening Point Test).
3.1.2 Carry out standard test for quality and properties of
sand (Sand Segregation Test (Fine Aggregate)).
3.1.3 Carry out standard test for properties of course
aggregate a. Sieve Analysis Test (Coarse Aggregate).
6
7
3.1.4 Carry out standard test on workability of fresh
concrete (Slump Test).
3.1.5 Carry out standard testing to determine the strength
of hardened concrete (Compressive Strength Test
Cubes).
3.1.6 Use the right tools and equipment to obtain yield
result.
3.1.7 Carry out test correctly according to safety and
health procedure.
3.1.8 Accomplish the test within a given time frame.
3.2 Demonstrate active participation and cooperation
within a group.
3.2.1 Complete specific task within a group to complete
laboratory work in a given time.
3.2.2 Perform actively to complete the task and result.
2.0 Brickworks
2.1 Conduct various types of arrangement for brick wall
and finishing work; Bri
11 2.1.1 Identify the concept of brick and finishing work.
23/05/2022
- 2.1.2 Carry out the brickwork arrangement and finishing
29/05/2022 work;
a. Stretcher Bond.
b. English Bond. C
6
Project Project practical
activities
2.0 PLO5
ickworks
PLO9
CLO2
CLO3
3.0 Workshop practical
Concrete Workshop
activities
8
c. Flemish Bond. Wo
d. Wall plastering. La
2.1.3 Use the right tools and equipment to produce
cement mortar and construct various types of brick wall.
2.1.4 Use the right tools to gain the correct measurement
for brickwork arrangement.
2.1.5 Carry out brickwork correctly according to safety
and health procedure.
2.1.6 Accomplish the brickwork within a given time frame.
2.2 Work within a group and show ability to work in team
to complete assigned tasks during practical work
sessions.
2.2.1 Show active participation and cooperation within a
group.
2.2.2 Distribute specific task to each member in group to
complete laboratory work in a given time.
2.2.3 Perform actively in a group to complete the task.
3.0 Concrete Works And Laboratory
3.1 Conduct standard testing for concrete material, fresh
concrete and hardened concrete.
3.1.1 Carry out standard test for quality of cement
(Softening Point Test).
6
orks And SYN
aboratory ASYN
CLO1
CLO3
9
3.1.2 Carry out standard test for quality and properties of
sand (Sand Segregation Test (Fine Aggregate)).
3.1.3 Carry out standard test for properties of course
aggregate a. Sieve Analysis Test (Coarse Aggregate).
3.1.4 Carry out standard test on workability of fresh
concrete (Slump Test).
3.1.5 Carry out standard testing to determine the strength
of hardened concrete (Compressive Strength Test
Cubes).
3.1.6 Use the right tools and equipment to obtain yield
result.
3.1.7 Carry out test correctly according to safety and
health procedure.
3.1.8 Accomplish the test within a given time frame.
3.2 Demonstrate active participation and cooperation
within a group.
3.2.1 Complete specific task within a group to complete
laboratory work in a given time.
3.2.2 Perform actively to complete the task and result
2.0 Brickworks
12 2.1 Conduct various types of arrangement for brick wall Bri
30/05/2022 and finishing work;
-
05/06/2022 2.1.1 Identify the concept of brick and finishing work.
7
Project Project practical
activities
2.0 PLO5
ickworks
PLO9
CLO2
0
2.1.2 Carry out the brickwork arrangement and finishing
work;
a. Stretcher Bond.
b. English Bond. C
c. Flemish Bond. Wo
La
d. Wall plastering.
2.1.3 Use the right tools and equipment to produce
cement mortar and construct various types of brick wall.
2.1.4 Use the right tools to gain the correct measurement
for brickwork arrangement.
2.1.5 Carry out brickwork correctly according to safety
and health procedure.
2.1.6 Accomplish the brickwork within a given time frame.
2.2 Work within a group and show ability to work in team
to complete assigned tasks during practical work
sessions.
2.2.1 Show active participation and cooperation within a
group.
2.2.2 Distribute specific task to each member in group to
complete laboratory work in a given time.
2.2.3 Perform actively in a group to complete the task.
7
CLO3 Workshop Workshop practical
activities
3.0
Concrete SYN
orks And ASYN
aboratory
CLO1
CLO3
1
3.0 Concrete Works And Laboratory
3.1 Conduct standard testing for concrete material, fresh
concrete and hardened concrete.
3.1.1 Carry out standard test for quality of cement
(Softening Point Test).
3.1.2 Carry out standard test for quality and properties of
sand (Sand Segregation Test (Fine Aggregate)).
3.1.3 Carry out standard test for properties of course
aggregate a. Sieve Analysis Test (Coarse Aggregate).
3.1.4 Carry out standard test on workability of fresh
concrete (Slump Test).
3.1.5 Carry out standard testing to determine the strength
of hardened concrete (Compressive Strength Test
Cubes).
3.1.6 Use the right tools and equipment to obtain yield
result.
3.1.7 Carry out test correctly according to safety and
health procedure.
3.1.8 Accomplish the test within a given time frame.
3.2 Demonstrate active participation and cooperation
within a group.
3.2.1 Complete specific task within a group to complete
laboratory work in a given time.
3.2.2 Perform actively to complete the task and result
7
2
2.0 Brickworks
2.1 Conduct various types of arrangement for brick wall
and finishing work; Bri
2.1.1 Identify the concept of brick and finishing work.
2.1.2 Carry out the brickwork arrangement and finishing
work;
a. Stretcher Bond.
b. English Bond. C
c. Flemish Bond. Wo
La
13 d. Wall plastering.
06/06/2022
- 2.1.3 Use the right tools and equipment to produce
12/06/2022 cement mortar and construct various types of brick wall.
2.1.4 Use the right tools to gain the correct measurement
for brickwork arrangement.
2.1.5 Carry out brickwork correctly according to safety
and health procedure.
2.1.6 Accomplish the brickwork within a given time frame.
2.2 Work within a group and show ability to work in team
to complete assigned tasks during practical work
sessions.
2.2.1 Show active participation and cooperation within a
group.
7
Project Project practical
activities
2.0 PLO5
ickworks
PLO9
CLO2
CLO3
3.0 Workshop
Concrete activities Workshop practical
orks And SYN
aboratory ASYN
CLO1
CLO3
3
2.2.2 Distribute specific task to each member in group to
complete laboratory work in a given time.
2.2.3 Perform actively in a group to complete the task.
3.0 Concrete Works And Laboratory
3.1 Conduct standard testing for concrete material, fresh
concrete and hardened concrete.
3.1.1 Carry out standard test for quality of cement
(Softening Point Test).
3.1.2 Carry out standard test for quality and properties of
sand (Sand Segregation Test (Fine Aggregate)).
3.1.3 Carry out standard test for properties of course
aggregate a. Sieve Analysis Test (Coarse Aggregate).
3.1.4 Carry out standard test on workability of fresh
concrete (Slump Test).
3.1.5 Carry out standard testing to determine the strength
of hardened concrete (Compressive Strength Test
Cubes).
3.1.6 Use the right tools and equipment to obtain yield
result.
3.1.7 Carry out test correctly according to safety and
health procedure.
3.1.8 Accomplish the test within a given time frame.
7
4
3.2 Demonstrate active participation and cooperation
within a group.
3.2.1 Complete specific task within a group to complete
laboratory work in a given time.
3.2.2 Perform actively to complete the task and result
2.0 Brickworks
2.1 Conduct various types of arrangement for brick wall
and finishing work; Bri
2.1.1 Identify the concept of brick and finishing work.
2.1.2 Carry out the brickwork arrangement and finishing
work;
a. Stretcher Bond.
b. English Bond. C
14 Wo
La
13/06/2022 c. Flemish Bond.
-
19/06/2022
d. Wall plastering.
2.1.3 Use the right tools and equipment to produce
cement mortar and construct various types of brick wall.
2.1.4 Use the right tools to gain the correct measurement
for brickwork arrangement.
2.1.5 Carry out brickwork correctly according to safety
and health procedure.
2.1.6 Accomplish the brickwork within a given time frame.
7
Project Project practical
activities
2.0 PLO5
ickworks
PLO9
CLO2
CLO3
3.0 Workshop
Concrete activities Workshop practical
orks And SYN
aboratory
ASYN
CLO1
CLO3
5
2.2 Work within a group and show ability to work in team
to complete assigned tasks during practical work
sessions.
2.2.1 Show active participation and cooperation within a
group.
2.2.2 Distribute specific task to each member in group to
complete laboratory work in a given time.
2.2.3 Perform actively in a group to complete the task.
3.0 Concrete Works And Laboratory
3.1 Conduct standard testing for concrete material, fresh
concrete and hardened concrete.
3.1.1 Carry out standard test for quality of cement
(Softening Point Test).
3.1.2 Carry out standard test for quality and properties of
sand (Sand Segregation Test (Fine Aggregate)).
3.1.3 Carry out standard test for properties of course
aggregate a. Sieve Analysis Test (Coarse Aggregate).
3.1.4 Carry out standard test on workability of fresh
concrete (Slump Test).
3.1.5 Carry out standard testing to determine the strength
of hardened concrete (Compressive Strength Test
Cubes).
7
6
3.1.6 Use the right tools and equipment to obtain yield
result.
3.1.7 Carry out test correctly according to safety and
health procedure.
3.1.8 Accomplish the test within a given time frame.
3.2 Demonstrate active participation and cooperation
within a group.
3.2.1 Complete specific task within a group to complete
laboratory work in a given time.
3.2.2 Perform actively to complete the task and result
7
7
NAMA PENSYARAH : MUHAMAD HUSAINI BIN MOHAMA
JABATAN : JABATAN KEJURUTERAAN AWAM
KOD & NAMA KURSUS : DCC10022 – BRICKWORK AND CO
c TOPIK/KANDUNGAN
KEMAHIRAN KHUSUS
1.1 Menerangkan latarbelakang sukan
KEMAHIRAN KHUSUS
1.2 Memahami konsep kecergasan dan kecederaan
sukan
1.2.1 Mempraktikkan teknik memanaskan
badan, menyejukkan badan dan membuat regangan.
1.2.2 Menerangkan langkah-langkah mengelakkan
kecederaan dalam sukan.
1 KEMAHIRAN KHUSUS
1.3 Menerangkan kemhairan asas sukan
1.3.1 Menjelaskan istilah permainan Scrabble
1.3.2 Menerangkan format:
a. Permainan
b. Pertandingan
1.3.3 Menerangkan cara mencatat dan mengira
kiraan mata
1.3.4 Mempraktikkan teknik-teknik asas permainan
1.3.5 Menerangkan taktik dan strategi permainan
7
AD KAMILAN SESI : 11 2021/2022
ONCRETE LABORATORY SEKSYEN : S1
KELAS : DKA1A
RTA PENILAIAN MINGGU
P 02:00 1
2
P 04:00
3
P 12:01 Tunjuk Cara 4
(60%) 5
6
7
8
9
8
KEMAHIRAN KHUSUS
1.4 Menjelaskan asas-asas kepegawaian dan
kepengadilan
1.4.1 Mengenalpasti ciri-ciri dan peranan seorang
pengurus, jurulatih dan pengadil
1.4.2 Menghurai prinsip dan etika seorang
pengurus, jurulatih dan pengadil
KEMAHIRAN KHUSUS
1.5 Mengelolakan aktiviti
1.5.1 Merancang aktiviti:
a. Menerangkan prosedur penyediaan kertas
kerja
b. Menerangkan prosedur penyediaan kertas
kerja
1.5.2 Melaksanakan aktiviti:
a. Menerangkan prosedur pelantikan
jawatankuasa
b. Menjalankan mesyuarat
c. Melaksanakan aktiviti
1.5.3 Memimpin melalui penganjuran aktiviti:
a. Menyelaras tugas semasa penganjuran
aktiviti
b. Menyelesaikan konflik/masalah semasa
c. Menerapkan amalan 3R (Reduce,
Reuse, Recycle) dalam perancangan
dan pelaksanaan aktiviti.
7
P 02:00 10
11
P 08:01 Mini Projek 12
(40%) 13
14
9
SENARAI
RUJUKAN
80
Lampiran D
SENARAI RUJUKAN/ BAHAN KURSUS/ MATA PELAJARAN
LIST OF COURSE’S/ SUBJECT’S REFERENCES/ MATERIALS
Kursus / Mata Nama Rujukan/ Bahan Pengarang Penerbit Catatan
pelajaran
Name Of Book Author Publisher Remarks
Course / Subject
Anggaran Kos Kerja Bangunan Ahmad Prentice
Contract and (Edisi Kedua ) Abdullah Hall
Estimating
Standard Form of Contract Government Governmnt
Contract and P.W.D. FORM 203/203a (Rev. of Malaysia of Malaysia
Estimating
2010), (2010) Institution Institution
Contract and of of
Estimating Standard Method of Measurement
of Building Works, First Edition. Surveyors Surveyors
Malaysia Malaysia
Civil Construction Materials Reference David K. Butterworth
Engineering Book, Second Doran, R. Heinemann
Edition
Materials Cather Ltd.
Civil Engineering Materials R.K. :S. Chand &
Engineering Rajput, Company
Malaysian Standard EN 206 LTD
Materials (2016). Concrete – Specification,
Department Department
Brickworks Performance, Production and of Standard of Standard
and Concrete Conformity Malaysia Malaysia
Laboratory
Brickwork and Bricklaying Jon Crowood
Brickworks Collinson Press
and Concrete
Laboratory Testing Concrete The British The British
Brickworks Standard Standard
and Concrete Kursus Sains Sukan Tahap 1 Institution Institution
Laboratory
Siri Sains Sukan: Pengurusan Gapor Institut
Scrabbles Strategok Sukan Edisi Kedua Ahmad et Sukan
Negara
Scrabbles al.
Oxford
Hoe. W. E Fajar Sdn
et al.
Bhd
81
RANCANGAN
KERJA BAGI
TEMPOH
LATIHAN
MENGAJAR
82
Lampiran E
RANCANGAN KERJA BAGI TEMPOH LATIHAN MENGAJAR
TEACHING PRACTICUM PLANNING
Mata Pelajaran / Subject : CONTRACT AND ESTIMATING
Minggu Mata pelajaran Catatan
Week Subject Remarks
➢ Microsoft Teams
3.0 THE CONTRACT PROCEDURE ➢ Telegram
1 3.1 Describe the contract procedure ➢ Slaid Powerpoint
➢ Headphone
3.2 Explain the contract procedure ➢ Laptop
➢ Microsoft Teams
4.0 STANDARD FORM OF CONTRACT (P.W.D FORM 203 / ➢ Telegram
➢ Slaid Powerpoint
203A) ➢ Headphone
2 ➢ Laptop
➢ Latihan
4.1 Describe the clauses in Standard Form of Contract (P.W.D Form
Kumpulan:
203/203A with the latest version) Infografik
➢ Microsoft Teams
3-5 5.0 THE PRELIMINARY ESTIMATING METHOD ➢ Telegram
5.1 Explain the preliminary estimating methods ➢ Slaid Powerpoint
6-9 5.2 Estimate the construction cost by using preliminary estimating ➢ Headphone
7 ➢ Laptop
10-13 method ➢ Microsoft Teams
14 6.0 THE BUILD-UP RATE METHOD ➢ Telegram
15 6.1 Explain the build-up rate methods ➢ Slaid Powerpoint
6.2 Calculate the construction price rate by using build-up rate ➢ Headphone
➢ Laptop
method.
➢ Microsoft Teams
CUTI PERTENGAHAN SEMESTER ➢ Telegram
➢ Slaid Powerpoint
7.0 THE QUANTITY MEASUREMENT ➢ Headphone
7.1 Explain the quantity measurement using billing method and ➢ Laptop
drawing and specification method
7.2 Explain the method of taking off quantity measurement
7.3 Estimate the quantity of work by using taking off method
MINGGU ULANGKAJI PEPERIKSAAN
MINGGU PEPERIKSAAN AKHIR
83
Mata Pelajaran / Subject : CIVIL ENGINEERING MATERIALS
Minggu Mata pelajaran Catatan
Week Subject Remarks
1-2
1.0 CONCRETE MATERIALS AND MIXTURE ➢ Microsoft Teams
3 1.1 Identify the different components of concrete materials ➢ Telegram
1.2 Explain the basic knowledge of concrete mixture ➢ Slaid Powerpoint
1.3 Make use of basic knowledge of concrete mixture to classify ➢ Headphone
➢ Laptop
fresh concrete and hardened concrete
➢ Microsoft Teams
2.0 CONCRETE WORKS AT THE CONSTRUCTION SITE ➢ Telegram
2.1 Determine the cause and effects of segregation and bleeding on ➢ Slaid Powerpoint
➢ Headphone
concrete ➢ Laptop
2.2 Apply the basic concepts of concrete works at the construction ➢ Microsoft Teams
site ➢ Telegram
➢ Slaid Powerpoint
4 3.0 REINFORCED CONCRETE ➢ Headphone
3.1 Explain about Reinforced concrete ➢ Laptop
➢ Microsoft Teams
5 4.0 PRE-STRESSED CONCRETE ➢ Telegram
4.1 Interpret pre-stressed concrete ➢ Slaid Powerpoint
➢ Headphone
6 5.0 TIMBER ➢ Laptop
7 5.1 Explain the local timber ➢ Microsoft Teams
8 5.2 Discuss the use of local timber ➢ Telegram
➢ Slaid Powerpoint
9 CUTI PERTENGAHAN SEMESTER ➢ Headphone
10-11 ➢ Laptop
6.0 BRICK
6.1 Explain about the bricks and concrete block ➢ Microsoft Teams
6.2 Explain the basic knowledge of brick bonding in brickwork ➢ Telegram
6.3 Apply the fundamental principles of brick bonding in brick ➢ Slaid Powerpoint
➢ Headphone
arrangement ➢ Laptop
7.0 STEEL AND NON-STEEL MATERIALS
7.1 Explain about steel and non steel materials ➢ Microsoft Teams
7.2 Explain the basic concepts of steel and non-steel material ➢ Telegram
7.3 Explain the uses of steel and non-steel materials in building ➢ Slaid Powerpoint
➢ Headphone
element ➢ Laptop
8.0 BUILDING ELEMENTS
8.1 Explain about building elements ➢ Microsoft Teams
➢ Telegram
84
12-13 8.2 Determine the fundamental knowledge of building elements ➢ Slaid Powerpoint
8.3 Explain the concept of building elements ➢ Headphone
14 ➢ Laptop
15 9.0 FINISHES
9.1 Explain about building finishes ➢ Microsoft Teams
9.2 Interpret the fundamental knowledge of building finishes ➢ Telegram
9.3 Apply the building finishes according the building concept ➢ Slaid Powerpoint
➢ Headphone
MINGGU ULANGKAJI PEPERIKSAAN ➢ Laptop
MINGGU PEPERIKSAAN AKHIR
85
Mata Pelajaran / Subject : BRICKWORK AND CONCRETE LABORATORY
Minggu Mata pelajaran Catatan
Week Subject Remarks
1-2 ➢ Microsoft Teams
1.0 INTRODUCTION TO CIVIL ENGINEERING ➢ Telegram
3 LABORATORY ➢ Slaid Powerpoint
➢ Headphone
4-6 1.1 Identify the elements to be considered in the brickwork and ➢ Laptop
concrete laboratory
➢ Microsoft Teams
1.2 Recognize the workshop work principles ➢ Telegram
➢ Slaid Powerpoint
2.0 BRICKWORKS ➢ Headphone
➢ Laptop
2.1 Conduct various types of arrangement for brick wall and
finishing work ➢ Microsoft Teams
➢ Telegram
2.2 Work within a group and show ability to work in team to ➢ Slaid Powerpoint
complete assigned tasks during practical work sessions ➢ Headphone
➢ Laptop
3.0 CONCRETE WORKS AND LABORATORY
➢ Microsoft Teams
3.1 Conduct standard testing for concrete material, fresh concrete ➢ Telegram
and hardened concrete ➢ Slaid Powerpoint
➢ Headphone
3.2 Demonstrate active participation and cooperation within a group ➢ Laptop
7 CUTI PERTENGAHAN SEMESTER ➢ Microsoft Teams
➢ Telegram
8 1.0 INTRODUCTION TO CIVIL ENGINEERING ➢ Slaid Powerpoint
LABORATORY ➢ Headphone
9-10 ➢ Laptop
11-13 1.1 Identify the elements to be considered in the brickwork and
concrete laboratory ➢ Microsoft Teams
14 ➢ Telegram
1.2 Recognize the workshop work principles ➢ Slaid Powerpoint
2.0 BRICKWORKS ➢ Headphone
2.1 Conduct various types of arrangement for brick wall and ➢ Laptop
finishing work
2.2 Work within a group and show ability to work in team to
complete assigned tasks during practical work sessions
3.0 CONCRETE WORKS AND LABORATORY
3.1 Conduct standard testing for concrete material, fresh concrete
and hardened concrete
3.2 Demonstrate active participation and cooperation within a group
MINGGU ULANGKAJI PEPERIKSAAN
15 MINGGU PEPERIKSAAN AKHIR
86
Mata Pelajaran / Subject : SCRABBLES
Minggu Mata pelajaran Catatan
Week Subject Remarks
➢ Microsoft Teams
KEMAHIRAN KHUSUS ➢ Telegram
1-2 ➢ Slaid Powerpoint
➢ Headphone
1.1 MENERANGKAN LATARBELAKANG SUKAN ➢ Laptop
1.2 MEMAHAMI KONSEP KECERGASAN DAN ➢ Microsoft Teams
KECEDERAAN SUKAN ➢ Telegram
➢ Slaid Powerpoint
3 1.2.1 Mempraktikkan teknik memanaskan badan, menyejukkan ➢ Headphone
badan dan membuat regangan ➢ Laptop
1.2.2 Menerangkan langkah-langkah mengelakkan kecederaan dalam ➢ Microsoft Teams
sukan ➢ Telegram
➢ Slaid Powerpoint
1.3 MENERANGKAN KEMAHIRAN ASAS SUKAN ➢ Headphone
1.3.1 Menjelaskan keperluan sukan ➢ Laptop
4-10 1.3.2 Menerangkan istilah-istilah dalam sukan
1.3.3 Menerangkan format permainan dan pertandingan ➢ Microsoft Teams
1.3.4 Mempraktik teknik-teknik asas sukan ➢ Telegram
1.3.5 Menerangkan strategi sukan ➢ Slaid Powerpoint
➢ Headphone
7 CUTI PERTENGAHAN SEMESTER ➢ Laptop
11 1.4 MENJELASKAN ASAS-ASAS KEPEGAWAIAN DAN ➢ Microsoft Teams
KEPENGADILAN ➢ Telegram
12-13 ➢ Slaid Powerpoint
14 1.4.1 Mengenal pasti ciri-ciri dan peranan seorang pengurus, ➢ Headphone
jurulatih dan pengadil ➢ Laptop
1.4.2 Menghurai prinsip dan etika seorang pengurus, jurulatih dan
pengadil
1.5 MENGELOLAKAN AKTIVITI
1.5.1 Merancang aktiviti
1.5.2 Melaksanakan aktiviti
1.5.3 Memimpin melalui penganjuran aktiviti
MINGGU ULANGKAJI PEPERIKSAAN
15 MINGGU PEPERIKSAAN AKHIR
87
RANCANGAN
PENGAJARAN
MINGGUAN
88
RANCANGAN
PENGAJARAN
MINGGUAN
(CONTRACT AND
ESTIMATING - DKA2B)
89
RANCANGAN MENG
WEEKLY LE
NAMA MUHAMAD HUSAINI BIN MOHAMAD NO TEL :
: KAMILAN
SUBJEK DCC 20073 - CONTRACT MULAI : 21/3/2022
: AND ESTIMATING
BIL TAJUK KANDUNGAN
1 3.0 The Contract 3.1 Describe the contract
Procedure procedure
3.2 Explain the contract
procedure
9
Lampiran F
GAJAR MINGGUAN
ESSON PLAN
0136786020
HINGGA : 8/7/2022
HURAIAN
3.1.1 Describe contract and subcontract
3.1.2 Explain principles of contract
3.2.1 Identify the features, requirements, advantages and
disadvantages of contracts for;
a. Lump Sum Contract
b. Turnkey Contract
c. Cost Reimbursement Contract (Cost plus Contract)
d. Measure and Value Contract
3.2.2 Explain main/prime contractor, domestic sub-
contractors, nominated sub-contractor and nominated
supplier
0
MINGGU KE KELAS / MULAI HING
TINGKATAN
1 DKA 2B 21-03- 25-03-2
2022
9
GGA RANCANGAN ABBM/CATATAN
MINGGUAN
2022 3.0 THE CONTRACT 1. Microsoft Teams
PROCEDURE 2. Telegram
3.1 Describe the 3. Slaid Powerpoint
contract procedure 4. Headphone
3.2 Explain the 5. Laptop
contract procedure
1