LAPORAN IAP_FULL REPORT 301221

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

4. REFERENCES Strongly Disagree 1
Disagree 2
Are the recommended references suitable with the course Agree 3
content? (If No, please state your reason/s) Strongly Agree 4

Suggestions/Recommendations: (Please use additional sheet of papers if the space

provided below is insufficient for your comments)

1. Student should be allow to look into their own community for an engineering
problems and encourge to use it as their project paper.

2. The result and recommendation from their project paper can be use to elevate
and solve problem in their community.

3. Project title also can be obtain from nearby industry player. This research and study
could help the industry player to become more competitave in exchange with their
facilities and funding.

Page 2 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

Signature : ________________________________________________________

Name : _T_s_.__Ir_._N__G__C__H_I_U__M__IN__G__@___R__O__L_A_N__D__N__G__________________
: _E_R__A_M__A__J_U__S__Y_N__E_R__G_Y__S__D_N___B_H__D________________________
Organization/ Institution/
Company Name : _L_E__A_D__C__O__N_S__U_L_T__A_N__T___________________________________
Designation : _a_q_9__8_1_6_0_@___h_o_t_m__a_il_.c__o_m__________________________________
: _0_1_2__-6__3_8__1_2_0_8___________________________________________
Email address : _2_8__O__c_to__b_e_r_2__0_2_1________________________________________

Contact No.

Date

Page 3 of 3

THANK YOU FOR YOUR FEEDBACK

DCC 50194
FINAL YEAR PROJECT 2

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

NAME OF PROGRAMME: : DIPLOMA IN CIVIL ENGINEERING

NAME OF COURSE : FINAL YEAR PROJECT 2
DCC 50194

Please give your comments and/or suggestions or tick (√), where appropriate, based
on the following questions:-

1. COURSE LEARNING OUTCOME (CLO) Strongly Disagree 1
Disagree 2
Are the CLO stated relevant with the course? (If No, please Agree 3
state your reason/s) Strongly Agree 4

to

2. COURSE CONTENT Strongly Disagree 1
Disagree 2
Are the content of this course relevant with the development/ Agree 3
needs/requirements of the industries? (If No, please state your Strongly Agree 4
reason/s)

3. ASSESSMENT TASKS Strongly Disagree 1
Disagree 2
Are the recommended assessment tasks suitable to assess Agree 3
student’s attainment of the CLO? (If No, please state your Strongly Agree 4
reason/s)

Page 1 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

4. REFERENCES Strongly Disagree 1
Disagree 2
Are the recommended references suitable with the course Agree 3
content? (If No, please state your reason/s) Strongly Agree 4

To update the old references.

Suggestions/Recommendations: (Please use additional sheet of papers if the space

provided below is insufficient for your comments)

1. To increase the industry engagement.
2. To appoint the co-supervisor from industry.
3. To engage the panel from industry.

Page 2 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

Signature : ________________________________________________________

Name : ________________________________________________________
: ________________________________________________________
Organization/ Institution/
Company Name : _____K__E_T__U__A__P_R__O__G__R__A_M___K_E__J_U__R__U_T__E__R_A__A_N___A_W___A_M__l_il_l
Designation : _____li_ll_ia_n_@___u_m__s_.e__d_u_._m__y_________________________________
: _0_1_3__8_6_9_8_0__0_4____________________________________________
Email address : _2_8__O__K__T_O__B__E_R___2_0_2__1___________________________________

Contact No.

Date

Page 3 of 3

THANK YOU FOR YOUR FEEDBACK



















Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

NAME OF PROGRAMME: : DIPLOMA IN CIVIL ENGINEERING

NAME OF COURSE : FINAL YEAR PROJECT 2
DCC 50194

Please give your comments and/or suggestions or tick (√), where appropriate, based
on the following questions:-

1. COURSE LEARNING OUTCOME (CLO) Strongly Disagree 1
Disagree 2
Are the CLO stated relevant with the course? (If No, please Agree 3
state your reason/s) Strongly Agree 4

2. COURSE CONTENT Strongly Disagree 1
Disagree 2
Are the content of this course relevant with the development/ Agree 3
needs/requirements of the industries? (If No, please state your Strongly Agree 4
reason/s)

3. ASSESSMENT TASKS Strongly Disagree 1
Disagree 2
Are the recommended assessment tasks suitable to assess Agree 3
student’s attainment of the CLO? (If No, please state your Strongly Agree 4
reason/s)

Page 1 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

4. REFERENCES Strongly Disagree 1
Disagree 2
Are the recommended references suitable with the course Agree 3
content? (If No, please state your reason/s) Strongly Agree 4

Suggestions/Recommendations: (Please use additional sheet of papers if the space

provided below is insufficient for your comments)

1. To improve communication skills of the students (Soft Skill).

Page 2 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

Signature :
: ALMANDO BIN ABBIL
Name : CONSULTING FIRM / AMIR MADANI RUNDING SDN BHD
Organization/ Institution/
Company Name : RESIDENT ENGINEER
Designation : [email protected]
Email address : 0198321991
Contact No. : 28/10/2021

Date

Page 3 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

NAME OF PROGRAMME: : DIPLOMA IN CIVIL ENGINEERING

NAME OF COURSE : FINAL YEAR PROJECT 2
DCC 50194

Please give your comments and/or suggestions or tick (√), where appropriate, based
on the following questions:-

1. COURSE LEARNING OUTCOME (CLO) Strongly Disagree 1
Disagree 2
Are the CLO stated relevant with the course? (If No, please Agree 3
state your reason/s) Strongly Agree 4

2. COURSE CONTENT Strongly Disagree 1
Disagree 2
Are the content of this course relevant with the development/ Agree 3
needs/requirements of the industries? (If No, please state your Strongly Agree 4
reason/s)

3. ASSESSMENT TASKS Strongly Disagree 1
Disagree 2
Are the recommended assessment tasks suitable to assess Agree 3
student’s attainment of the CLO? (If No, please state your Strongly Agree 4
reason/s)

Page 1 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

4. REFERENCES Strongly Disagree 1
Disagree 2
Are the recommended references suitable with the course Agree 3
content? (If No, please state your reason/s) Strongly Agree 4

Suggestions/Recommendations: (Please use additional sheet of papers if the space

provided below is insufficient for your comments)

1. Ability to communicate and presenting the final product to the industry player is very
crucial.

2. Critical thinking should be included in the syllabus to look into solving problem of
their surrounding daily life.

Page 2 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

Signature : ________________________________________________________

Name : _T_s_.__Ir_._N__G__C__H_I_U__M__IN__G__@___R__O__L_A_N__D__N__G__________________
: _E_R__A_M__A__J_U__S__Y_N__E_R__G_Y__S__D_N___B_H__D________________________
Organization/ Institution/
Company Name : _L_E__A_D__C__O__N_S__U_L_T__A_N__T___________________________________
Designation : _a_q_9__8_1_6_0_@___h_o_t_m__a_il_.c__o_m__________________________________
: _0_1_2__-6__3_8__1_2_0_8___________________________________________
Email address : _2_8__O__c_to__b_e_r_2__0_2_1________________________________________

Contact No.

Date

Page 3 of 3

THANK YOU FOR YOUR FEEDBACK

DCC 50232
ENGINEERING IN SOCIETY

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

NAME OF PROGRAMME: : DIPLOMA IN CIVIL ENGINEERING

NAME OF COURSE : ENGINEERING IN SOCIETY
DCC 50232

Please give your comments and/or suggestions or tick (√), where appropriate, based
on the following questions:-

1. COURSE LEARNING OUTCOME (CLO) Strongly Disagree 1
Disagree 2
Are the CLO stated relevant with the course? (If No, please Agree 3
state your reason/s) Strongly Agree 4

2. COURSE CONTENT Strongly Disagree 1
Disagree 2
Are the content of this course relevant with the development/ Agree 3
needs/requirements of the industries? (If No, please state your Strongly Agree 4
reason/s)

3. ASSESSMENT TASKS Strongly Disagree 1
Disagree 2
Are the recommended assessment tasks suitable to assess Agree 3
student’s attainment of the CLO? (If No, please state your Strongly Agree 4
reason/s)

Page 1 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

4. REFERENCES Strongly Disagree 1
Disagree 2
Are the recommended references suitable with the course Agree 3
content? (If No, please state your reason/s) Strongly Agree 4

Suggestions/Recommendations: (Please use additional sheet of papers if the space

provided below is insufficient for your comments)

1. To design variety of assessment method and not limited o organizing talk only.
2. May consider community work projectt witth short term grant funding.

Page 2 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

Signature : ________________________________________________________

Name : __K_E__T_U__A__P__R__O_G__R__A__M__K__E_J__U_R__U__T_E__R__A_A__N__A__W__A__M_______

Organization/ Institution/ : ________________________________________________________
Company Name
Designation : ________________________________________________________

Email address : ________________________________li_ll_ia__n_@___u_m__s_._e_d_u__.m__y_____
: _____0__1_3_8__6_9_8__0_0_4_______________________________________
Contact No. : _2_8__O__K__T_O__B__E_R___2_0_2__1___________________________________

Date

Page 3 of 3

THANK YOU FOR YOUR FEEDBACK



















Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

NAME OF PROGRAMME: : DIPLOMA IN CIVIL ENGINEERING

NAME OF COURSE : ENGINEERING IN SOCIETY
DCC 50232

Please give your comments and/or suggestions or tick (√), where appropriate, based
on the following questions:-

1. COURSE LEARNING OUTCOME (CLO) Strongly Disagree 1
Disagree 2
Are the CLO stated relevant with the course? (If No, please Agree 3
state your reason/s) Strongly Agree 4

2. COURSE CONTENT Strongly Disagree 1
Disagree 2
Are the content of this course relevant with the development/ Agree 3
needs/requirements of the industries? (If No, please state your Strongly Agree 4
reason/s)

3. ASSESSMENT TASKS Strongly Disagree 1
Disagree 2
Are the recommended assessment tasks suitable to assess Agree 3
student’s attainment of the CLO? (If No, please state your Strongly Agree 4
reason/s)

Page 1 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

4. REFERENCES Strongly Disagree 1
Disagree 2
Are the recommended references suitable with the course Agree 3
content? (If No, please state your reason/s) Strongly Agree 4

Suggestions/Recommendations: (Please use additional sheet of papers if the space

provided below is insufficient for your comments)

Page 2 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

Signature :
: ALMANDO BIN ABBIL
Name : CONSULTING FIRM / AMIR MADANI RUNDING SDN BHD
Organization/ Institution/
Company Name : RESIDENT ENGINEER
Designation : [email protected]
Email address : 0198321991
Contact No. : 28/10/2021

Date

Page 3 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

NAME OF PROGRAMME: : DIPLOMA IN CIVIL ENGINEERING

NAME OF COURSE : ENGINEERING IN SOCIETY
DCC 50232

Please give your comments and/or suggestions or tick (√), where appropriate, based
on the following questions:-

1. COURSE LEARNING OUTCOME (CLO) Strongly Disagree 1
Disagree 2
Are the CLO stated relevant with the course? (If No, please Agree 3
state your reason/s) Strongly Agree 4

2. COURSE CONTENT Strongly Disagree 1
Disagree 2
Are the content of this course relevant with the development/ Agree 3
needs/requirements of the industries? (If No, please state your Strongly Agree 4
reason/s)

3. ASSESSMENT TASKS Strongly Disagree 1
Disagree 2
Are the recommended assessment tasks suitable to assess Agree 3
student’s attainment of the CLO? (If No, please state your Strongly Agree 4
reason/s)

Page 1 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

4. REFERENCES Strongly Disagree 1
Disagree 2
Are the recommended references suitable with the course Agree 3
content? (If No, please state your reason/s) Strongly Agree 4

Suggestions/Recommendations: (Please use additional sheet of papers if the space

provided below is insufficient for your comments)

1. Engineering society should focus in building up the attitude-based instead of knowledge
-based education.

2. Student need to be exposed to the actual community. Student need to be involved in
atleast 1 community services. This activity shall be recorded and reported as part of the
CA.

3. the report also need to include reponse from community where he/she is serve as part
of evidence.

4. The best way to contribute to a community is in the student hometown environment
This can be done during mid semester break.

5. The student should serve in their own community.

Page 2 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

Signature : ________________________________________________________

Name : _T_s_.__Ir_._N__G__C__H_I_U__M__IN__G__@___R__O__L_A_N__D__N__G__________________
: _E_R__A_M__A__J_U__S__Y_N__E_R__G_Y__S__D_N___B_H__D________________________
Organization/ Institution/
Company Name : _L_E__A_D__C__O__N_S__U_L_T__A_N__T___________________________________
Designation : _a_q_9__8_1_6_0_@___h_o_t_m__a_il_.c__o_m__________________________________
: _0_1_2__-6__3_8__1_2_0_8___________________________________________
Email address : _2_8__O__c_to__b_e_r_2__0_2_1________________________________________

Contact No.

Date

Page 3 of 3

THANK YOU FOR YOUR FEEDBACK

DCC 50242
BUILDING INFORMATION MODELLING (BIM)

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

NAME OF PROGRAMME: : DIPLOMA IN CIVIL ENGINEERING

NAME OF COURSE : BUILDING INFORMATION MODELLING (BIM)
DCC 50242

Please give your comments and/or suggestions or tick (√), where appropriate, based
on the following questions:-

1. COURSE LEARNING OUTCOME (CLO) Strongly Disagree 1
Disagree 2
Are the CLO stated relevant with the course? (If No, please Agree 3
state your reason/s) Strongly Agree 4

2. COURSE CONTENT Strongly Disagree 1
Disagree 2
Are the content of this course relevant with the development/ Agree 3
needs/requirements of the industries? (If No, please state your Strongly Agree 4
reason/s)

3. ASSESSMENT TASKS Strongly Disagree 1
Disagree 2
Are the recommended assessment tasks suitable to assess Agree 3
student’s attainment of the CLO? (If No, please state your Strongly Agree 4
reason/s)

Page 1 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

4. REFERENCES Strongly Disagree 1
Disagree 2
Are the recommended references suitable with the course Agree 3
content? (If No, please state your reason/s) Strongly Agree 4

Suggestions/Recommendations: (Please use additional sheet of papers if the space

provided below is insufficient for your comments)

1. To include variety of assessment methods to increase student's understanding that reflects their
individual capability.

Page 2 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM
JABATAN KEJURUTERAAN AWAM

Signature : ________________________________________________________
: ________________________________________________________
Name : ________________________________________________________

Organization/ Institution/ : ________________________________________________________
Company Name
Designation : ____li_lli_a_n_@___u_m__s_.e__d_u_._m__y__________________________________
: ____0_1_3_8__6_9_8_0__0_4_________________________________________
Email address : _2_8__O__K__T_O__B__E_R___2_0_2__1___________________________________

Contact No.

Date

Page 3 of 3

THANK YOU FOR YOUR FEEDBACK