LAPORAN IAP_FULL REPORT 301221

Designation ASSISTANT HOUSEKEEPING MANAGER
:
Email address 25 October 2021
: THANK YOU FOR YOUR FEEDBACK
Contact No.
:
Date
:

KEMENTERIAN PENGAJIAN TINGGI DEPARTMENT OF TOURISM AND HOSPITALITY

INDUSTRY ADVISORY PANEL MEETING
CURRICULLUM FEEDBACK FORM

NAME OF PROGRAM: DIPLOMA PENGURUSAN HOTEL (DHM)
NAME OF COURSE: DTA20093 FOOD AND BEVERAGE SERVICE

Please give your comments and/or suggestions or tick (√), where appropriate, based on the following questions:-

1. COURSE LEARNING OUTCOME (CLO) Strongly Agree 4
Are the CLO stated relevant with the course? (If No, please state your reason/s) 3
2
Agree 1

Disagree

Strongly Disagree

2. COURSE CONTENT Strongly Agree 4
Agree 3
Are the content of this course relevant with the development/ needs/requirements of Disagree 2
the industries? (If No, please state your reason/s) Strongly Disagree 1

3. ASSESSMENT TASKS Strongly Agree 4
Are the recommended assessment tasks suitable to assess student’s attainment of Agree 3
the CLO? (If No, please state your reason/s) Disagree 2
Strongly Disagree 1
4. REFERENCES
Are the recommended references suitable with the course content? (If No, please Strongly Agree 4
state your reason/s) Agree 3
Disagree 2
Strongly Disagree 1

Suggestions/Recommendations: (Please use additional sheet of papers if the space provided below is insufficient for
your comments)
When students able to perform the skills, they have shown their understanding of the certain topic.

Signature MELISSA CHAI YUN FA
: DREAMTEL HOTEL KOTA KINABALU
Name
: ASSISTANT GENERAL MANAGER CUM HUMAN RESOURCE MANAGER
Organization/
Institution/ [email protected]
Company Name +60 16-651 5727
D: esignation 25 October 2021
:
Email address
:
Contact No.
:
Date
:

THANK YOU FOR YOUR FEEDBACK



MINIT MESYUARAT BERSAMA PANEL PENASIHAT PROGRAM DHR TAHUN 2021
JABATAN PELANCONGAN DAN HOSPITALITI
POLITEKNIK KOTA KINABALU

Tarikh : 21 Oktober 2021

Masa : 2.00 petang – 5.00 petang

Tempat : MsTeam (https://bit.ly/2ZaXGP7 )

Hadir:
1. Puan Adwina Vali @ Galus (Ketua Program DHR/ Pengerusi)
2. Cik Norfatisyah Abdul Talib (Setiausaha)
3. Encik Muzaffar Mohd Sidin (Penyelaras Kursus DTR20064)
4. Encik Edi Rizal Kassim (Penyelaras Kursus DTR30094)
5. Puan. Siti Hajar Md Shahar (Panel Penasihat I)
6. Puan Siti Zuraini Ramley Alan (Panel Penasihat II )
7. Encik Donny Lanjum (Panel Pensihat III)
8. Encik Kamal Bin Ali (Ketua Jabatan Pelancongan dan Hospitaliti)

Tidak hadir (Dengan maaf):
1. Chef Steve Benedict (Panel Penasihat IV)

I. PERUTUSAN PENGERUSI
1. Kata alu-aluan
Pengerusi mengucapkan terima kasih serta mengalukan kehadiran panel penasihat
program DHR serta ahli mesyuarat yang lain ke Mesyuarat Bersama Panel Penasihat
Program DHR tahun 2021.
Makluman

2. Objektif Mesyuarat
Pengerusi memaklumkan tujuan mesyuarat adalah untuk membincangkan kurikulum
bagi Kursus DTR20064 Basic Cookery dan Kursus DTR30094 Resort Recreational
Operation. Pengerusi memaklumkan tatacara mesyuarat dan memberi perkongsian
berkaitan pencapaian CORR dan PLORR pelajar program DHR.
Makluman

II. PEMBENTANGAN KURIKULUM
3. Pembentangan kurikulum DTR20064 Basic Cookery
Pembentangan telah dilaksanakan oleh Encik Muzaffar Mohd Sidin selaku penyelaras
kursus DTR20064 Basic Cookery. Maklumat pembentangan adalah seperti berikut:

3.1 Kod DTR20064 mula digunakan pada sesi Disember 2020 bagi menggantikan
kod DTR2044.

3.2 Dimaklumkan kursus DTR20064 menggabungkan asas berkaitan hot cooking,
pastry dan bakery.

3.3 Pelaksanaan dan kaedah penilaian kursus dilaksanakan sepenuhnya secara
amali berdasarkan kepada maklumat yang tercatat pada Course Outline.

3.4 Sesi PdP dijalanakan sepenuhnya secara amali berdasarkan contact hours yang
ditetapkan.
Makluman

4. Pembentangan kurikulum DTR30094 Resort Recreational Operation
Pembentangan telah dilaksanakan oleh Encik Edi Rizal Kassim selaku penyelaras
kursus DTR30094 Resort Recreational Operation. Maklumat pembentangan adalah
seperti berikut:

4.1 Kod DTR30094 mula digunakan pada sesi I 2021/2022 bagi menggantikan kod
DTR3034 Recreational Resort Operation.

4.2 Sesi PdP dijalankan secara teori dan amali berdasarkan keperluan topik yang
terdapat dalam silibus kursus.

4.3 Pelaksanaan dan kaedah penilaian pelajar secara teori dan amali dijalankan
berdasarkan kesesuaian topik selaras dengan keperluan kursus serta menepati
CLO kursus dengan kerjasama pihak industri.

4.4 DTR30094 merupakan kursus discipline core bagi program DHR.
4.5 Sumber kewangan bagi melaksanakan PdP secara amali diperolehi daripada

peruntukan khas JPPKK dan kerjasama COC bersama pihak industri.

Makluman

III. MAKLUM BALAS DARIPADA PANEL
5. Cadangan dan maklumbalas daripada panel bagi kursus DTR20064 Basic Cookery
5.1 Silibus – Panel berpendapat bahawa silibus kursus terlalu padat. Bebanan
tenaga pengajar dan pelajar dalam menjalankan PdP bagi kursus DTR20064
perlu diberi perhatian. Dicadangkan untuk mengkaji semula rasional kurikulum
dalam menggabungkan hot cooking, pastry dan bakery dalam satu silibus.
5.2 Assessment – Kaedah dan jumlah penilaian perlu diberi perhatian agar selari
dengan silibus serta mencapai CLO kursus.
5.3 Objektif kursus – Pemilihan dan penggunaan perkataan tahap yang terlalu
tinggi pada synopsis kursus (contoh: all the cooking techniques dan students
will master garnishing) perlu dikaji semula bagi memastikan selari dengan
silibus serta mencapai CLO kursus dan PLO program.
5.4 References book – Pemilihan dan penggunaan buku rujukan perlu dilihat
semula bagi memastikan buku terkini dan lebih sesuai.
Makluman

6. Cadangan dan maklumbalas daripada panel bagi kursus DTR30094 Resort
Recreational Operation
6.1 Kos – Kursus memerlukan peruntukan yang secukupnya bagi memastikan PdP
secara amali dapat dijalankan bagi memenuhi dan mencapai CLO kursus serta
meringankan beban kewangan pelajar. Dicadangkan untuk menjalinkan
kerjasama bersama industri sebagai usaha untuk menampung kos berkaitan.
6.2 Assessment – Jumlah penilaian dilihat terlalu banyak dan dicadangkan untuk
dikaji semula bagi melihat kesesuaian dalam mencapai CLO kursus serta
mengelakkan bebanan kepada tenaga pengajar dan pelajar.
6.3 Silibus – Terdapat beberapa topik yang dilihat tidak selari atau menyokong PLO
program yang menjadikan silibus kursus terlalu padat. Dicadangkan kajian
semula silibus dijalankan bagi mengenalpasti topik-topik yang rasional dan
bertepatan dengan kehendak industri serta menggugurkan topik yang
selebihnya dari silibus bagi mengurangkan bebanan tenaga pengajar dan
pelajar serta memastikan CLO kursus tercapai.
6.4 Cadangan untuk memasukkan elemen indoor recreational dalam silibus kursus
serta selari dengan peredaran semasa.
6.5 CLO kursus perlu disemak semula kerana terdapat percanggahan pernyataan
dan penilaian.
Makluman

IV. RUMUSAN PERBINCANGAN
7. Penawaran kursus DTR30094 Resort Recreational Operation dilihat sebagai nilai
tambah dan tarikan kepada program DHR Politeknik.
8. Tindakan dalam mengkaji semula silibus kursus bagi kedua-dua kursus perlu
dijalankan. Kajian semula perlu memfokuskan kepada rasional topik dengan
keperluan industri serta peredaran masa serta bebanan tenaga pengajar dan pelajar
dalam menjalankan PdP perlu dinilai.

9. Pembabitan pemain industri perlu dipergiatkan bagi mendapatkan maklumat terkini
serta bantuan kewangan dalam memastikan CLO kursus dan PLO DHR sentiasa
relevan.
Makluman

V. PENUTUP
10. Pengerusi mengucapkan terima kasih kepada panel dan juga pensyarah yang terlibat
pada mesyuarat kali ini. Panel diminta untuk mengisi Borang Maklumbalas Kurikulum.
Mesyuarat ditangguhkan pada jam 5.00 petang.

Disediakan oleh:

(NORFATISYAH ABDUL TALIB)
Setiausaha Mesyuarat

Disemak oleh:

(ADWINA VALI@GALUS)
Ketua Program Diploma Pengurusan Resort

Timestamp Email address Ahli Mesyuarat

10/26/2021 13:51:18 [email protected] Abdul Talib

10/26/2021 13:53:06 [email protected] En. Muzaffar Mohd Sidin

10/26/2021 13:54:43 [email protected]. Edi Rizal Kassim

10/26/2021 13:55:19 [email protected] Pn. Siti Zuraini Ramley Alan

10/26/2021 15:09:36 [email protected] Donny Lanjum

10/26/2021 17:22:42 [email protected] Pn. Siti Hajar Md Shahar

En. Kamal Bin Ali

Pn. Adwina Binti Vali @ Galus

Tugas Organisasi
Setiausaha Jabatan pelancongan dan Hospitaliti, Politeknik Kota Kinabalu
Penyelaras Kursus Jabatan pelancongan dan Hospitaliti, Politeknik Kota Kinabalu
Penyelaras Kursus Jabatan pelancongan dan Hospitaliti, Politeknik Kota Kinabalu
Panel Penasihat Fakulti Pengurusan Hotel dan Pelancongan, UiTM Cawangan Sabah
Panel Penasihat Hotel Sixty3
Panel Penasihat Fakulti Pengurusan Hotel dan Pelancongan, UiTM Cawangan Sabah
KJPH Jabatan pelancongan dan Hospitaliti, Politeknik Kota Kinabalu
KPro DHR Jabatan pelancongan dan Hospitaliti, Politeknik Kota Kinabalu

Jawatan No. Telefon

Pensyarah DM54 0138059694
Pengurus Operasi 0103821237
Pensyarah DM54 0194664675

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM

JABATAN PELANCONGAN DAN HOSPITALITI

NAME OF PROGRAMME: : DIPLOMA IN RESORT MANAGEMENT
NAME OF COURSE : DTR20064 BASIC COOKERY

Please give your comments and/or suggestions or tick (√), where appropriate, based
on the following questions:-

1. COURSE LEARNING OUTCOME (CLO) Strongly Disagree 1
Disagree 2
Are the CLO stated relevant with the course? (If No, please Agree 3
state your reason/s) Strongly Agree 4

2. COURSE CONTENT Strongly Disagree 1
Disagree 2
Are the contents of this course relevant with the Agree 3
development/ needs/requirements of the industries? (If No, Strongly Agree 4
please state your reason/s)

3. ASSESSMENT TASKS Strongly Disagree 1
Disagree 2
Are the recommended assessment tasks suitable to assess Agree 3
student’s attainment of the CLO? (If No, please state your Strongly Agree 4
reason/s)

Page 1 of 2

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM

JABATAN PELANCONGAN DAN HOSPITALITI

4. REFERENCES Strongly Disagree 1
Disagree 2
Are the recommended references suitable with the course Agree 3
content? (If No, please state your reason/s) Strongly Agree 4

Suggestions/Recommendations: (Please use additional sheet of papers if the space

provided below is insufficient for your comments)

Page 2 of 2

THANK YOU FOR YOUR FEEDBACK



Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM

OSPITALITI

NAME OF PROGRAMME: : DIPLOMA IN RESORT MANAGEMENT

NAME OF COURSE : DTR20064 BASIC COOKERY

Please give your comments and/or suggestions or tick (√), where appropriate, based on
the following questions:-

1. COURSE LEARNING OUTCOME (CLO) Strongly Disagree 1
Disagree 2
Are the CLO stated relevant with the course? (If No, please Agree 3
state your reason/s) Strongly Agree 4

This course is fundamental to food and beverage operations.
The CLOs are appropriate and relevant to the course. Strongly
agree

2. COURSE CONTENT Strongly Disagree 1
Disagree 2
Are the contents of this course relevant with the Agree 3
development/ needs/requirements of the industries? (If No, Strongly Agree 4
please state your reason/s)

Yes, the content of the course is relevant with the
development, needs and requirement of the industries. The
only matter is that it is very compact, having both pastry and
basic cookery in one course. However, the placement of the
subject in the syllabus and the scope/content were cleverly
thought.

3. ASSESSMENT TASKS Strongly Disagree 1
Are the recommended assessment tasks suitable to assess Disagree 2
student’s attainment of the CLO? (If No, please state your Agree 3
reason/s) Strongly Agree 4
The assessment weight is well distributed and suitable, well
aligned with the CLO

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM

Page 1 of 3

JABATAN PELANCONGAN DAN HOSPITALITI

4. REFERENCES Strongly 1
Disagree
Are the recommended references suitable with the course Disagree 2
content? (If No, please state your reason/s) 3
Most of the reference are a bit far behind, but main Agree 4
reference is sufficient. If there is a new edition for the main
reference, the faculty should consider to use it. Strongly Agree

Suggestions/Recommendations: (Please use additional sheet of papers if the

space provided below is insufficient for your comments)
Please remove the word ‘all’ and ‘master’ in the course synopsis. Students
undertaking this course are going through basic training, thus the word ‘master’ might
give different perception to those assessing their skills. The word ‘all’ should be used
carefully. The syllabus must state what ‘all’ cookery method means, so that it reflects
the skills the students have after completing this course.

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM

Page 2 of 3

JABATAN PELANCONGAN DAN HOSPITALITI

Signature : ________________________________________________________
Name
: Siti Hajar bt Md Shahar
Organization/ Institution/
Company Name : UiTM Cawangan Sabah
Designation
Email address : Pensyarah Kanan

Contact No. : [email protected]
: 019-4664675
Date : 26 Oktober 2021
Page 3 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM

JABATAN PELANCONGAN DAN HOSPITALITI

NAME OF PROGRAMME: : DIPLOMA IN RESORT MANAGEMENT
NAME OF COURSE : DTR20064 BASIC COOKERY

Please give your comments and/or suggestions or tick (√), where appropriate, based
on the following questions:-

1. COURSE LEARNING OUTCOME (CLO) Strongly Disagree 1
Disagree 2
Are the CLO stated relevant with the course? (If No, please Agree 3
state your reason/s) Strongly Agree 4

Very clear and understandable

2. COURSE CONTENT Strongly Disagree 1
Disagree 2
Are the contents of this course relevant with the Agree 3
development/ needs/requirements of the industries? (If No, Strongly Agree 4
please state your reason/s)

The course content is relevant and fit to the industry needs but
slightly compressed due to a combination of two big topics of Hot
Cooking and Pastry & Bakery. It is recommended if this two topics
can be possibly split into 2 different course codes.

Page 1 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM

JABATAN PELANCONGAN DAN HOSPITALITI

3. ASSESSMENT TASKS Strongly Disagree 1
Disagree 2
Are the recommended assessment tasks suitable to assess Agree 3
student’s attainment of the CLO? (If No, please state your Strongly Agree 4
reason/s)

The practical work 6x assessment (60%) can be execute thru
weekly assessment

4. REFERENCES Strongly Disagree 1
Disagree 2
Are the recommended references suitable with the course Agree 3
content? (If No, please state your reason/s) Strongly Agree 4

Can include 1-2 additional references if any which is the latest
edition (2019-current).

Suggestions/Recommendations: (Please use additional sheet of papers if the space

provided below is insufficient for your comments)

Page 2 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM

JABATAN PELANCONGAN DAN HOSPITALITI

Signature :
: SITI ZURAINI RAMLEY ALAN
Name :
Organization/ Institution/
Company Name :
Designation :
Email address :
Contact No. :

Date

Page 3 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM

JABATAN PELANCONGAN DAN HOSPITALITI

NAME OF PROGRAMME: : DIPLOMA IN RESORT MANAGEMENT
NAME OF COURSE : DTR30094 RESORT RECREATIONAL OPERATION

Please give your comments and/or suggestions or tick (√), where appropriate, based
on the following questions:-

1. COURSE LEARNING OUTCOME (CLO) Strongly Disagree 1
Disagree 2
Are the CLO stated relevant with the course? (If No, please Agree 3
state your reason/s) Strongly Agree 4

2. COURSE CONTENT Strongly Disagree 1
Disagree 2
Are the contents of this course relevant with the Agree 3
development/ needs/requirements of the industries? (If No, Strongly Agree 4
please state your reason/s)

3. ASSESSMENT TASKS Strongly Disagree 1
Disagree 2
Are the recommended assessment tasks suitable to assess Agree 3
student’s attainment of the CLO? (If No, please state your Strongly Agree 4
reason/s)

Page 1 of 2

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM

JABATAN PELANCONGAN DAN HOSPITALITI

4. REFERENCES Strongly Disagree 1
Disagree 2
Are the recommended references suitable with the course Agree 3
content? (If No, please state your reason/s) Strongly Agree 4

Suggestions/Recommendations: (Please use additional sheet of papers if the space

provided below is insufficient for your comments)

Page 2 of 2

THANK YOU FOR YOUR FEEDBACK



Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM

JABATAN PELANCONGAN DAN HOSPITALITI

NAME OF PROGRAMME: : DIPLOMA IN RESORT MANAGEMENT
NAME OF COURSE : DTR30094 RESORT RECREATIONAL OPERATION

Please give your comments and/or suggestions or tick (√), where appropriate, based on
the following questions:-

1. COURSE LEARNING OUTCOME (CLO) Strongly Disagree 1
Disagree 2
Are the CLO stated relevant with the course? (If No, please Agree 3
state your reason/s) Strongly Agree 4
The CLOs of the course stated is relevant to the studies.
However, I would like to suggest to drop the word ‘understand’
in CLO 1 as it contradicts with cognitive level 3 as stated in
CLO 1.

2. COURSE CONTENT Strongly Disagree 1
Disagree 2
Are the contents of this course relevant with the Agree 3
development/ needs/requirements of the industries? (If No, Strongly Agree 4
please state your reason/s)
They are relevant, however further improvement can be made
by:
1. Combining 2 topics together such as hiking and flora and

fauna would ease on the costs of executing the program
and it is sensible naturally.
2. To weight the relevant of Paragliding as one of the topic
syllabus due to the nature of the sport and its’ significance
to local outdoor air base sport. Is just theory exposure
would be sufficient?
3. Some content in the topic such as rope should be
evaluated. It imposed burden to the instruction since some
of the skills are not necessary. Being selective in the
activities is necessary to ease the implementation of the
course.
4. A balance indoor and outdoor recreational activities
should be introduced in the syllabus.

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM

3. ASSESSMENT TASKS Strongly Disagree 1
Disagree 2
Are the recommended assessment tasks suitable to assess Agree 3
student’s attainment of the CLO? (If No, please state your Strongly Agree 4
reason/s)

The type of assessments are appropriate, however it could be
very handful when the number of students increase. Keeping
the activity in balance is necessary.

Page 1 of 3

JABATAN PELANCONGAN DAN HOSPITALITI

4. REFERENCES Strongly 1
Disagree
Are the recommended references suitable with the course Disagree 2
content? (If No, please state your reason/s) 3
The references are appropriate to use. Agree 4

Strongly Agree

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM

Suggestions/Recommendations: (Please use additional sheet of papers if the

space provided below is insufficient for your comments)

Please get some feedback from the industry players assisting in the execution of the course. It
could be informal feedback or formal feedback through respond forms. Their input is vital in
identifying what skill is most useful and relevant to date.

Page 2 of 3

JABATAN PELANCONGAN DAN HOSPITALITI

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM

Signature : ________________________________________________________
Name
: Siti Hajar bt Md Shahar
Organization/ Institution/ : UiTM Cawangan Sabah
Company Name
Designation : Pensyarah Kanan
Email address : [email protected]
: 019-4664675
Contact No. : 26 October 2021

Date
Page 3 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM

JABATAN PELANCONGAN DAN HOSPITALITI

NAME OF PROGRAMME: : DIPLOMA IN RESORT MANAGEMENT
NAME OF COURSE : DTR30094 RESORT RECREATIONAL OPERATION

Please give your comments and/or suggestions or tick (√), where appropriate, based
on the following questions:-

1. COURSE LEARNING OUTCOME (CLO) Strongly Disagree 1
Disagree 2
Are the CLO stated relevant with the course? (If No, please Agree 3
state your reason/s) Strongly Agree 4

Suggestion for slight amend for CLO1 to remain only the word 'to
apply knowledge.....' in order to be align with the suggested C3
(application).

2. COURSE CONTENT Strongly Disagree 1
Disagree 2
Are the contents of this course relevant with the Agree 3
development/ needs/requirements of the industries? (If No, Strongly Agree 4
please state your reason/s)

Suggestion to reduced and combined related topics from 9 topics
offered to 7 topics only (exclude Introduction) in the syllabus
content. For example, to combined topic 2.0 Jungle Trekking and
3.0 Flora Fauna in 1 particular topic. In addition, Topic 9 Paragliding
can be included under one sub small topic in the course content.
Topic 1.0 Introduction to incorporate the elements of new safety
features and Resort Recreational SOPs in compliance of the
National Recovery Plan.

Page 1 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM

JABATAN PELANCONGAN DAN HOSPITALITI

3. ASSESSMENT TASKS Strongly Disagree 1
Disagree 2
Are the recommended assessment tasks suitable to assess Agree 3
student’s attainment of the CLO? (If No, please state your Strongly Agree 4
reason/s)

Continuous assessment are reasonable amount and maintained
with 4 elements only. Suggestion for "End of Chapter (10%)"
Assessment changed to "Test 2 (10%)".

4. REFERENCES Strongly Disagree 1
Disagree 2
Are the recommended references suitable with the course Agree 3
content? (If No, please state your reason/s) Strongly Agree 4

The recommended sources are relevant and to include latest
references if any (2019-current).

Suggestions/Recommendations: (Please use additional sheet of papers if the space

provided below is insufficient for your comments)

Page 2 of 3

THANK YOU FOR YOUR FEEDBACK

Kementerian Pengajian Tinggi Malaysia

INDUSTRY ADVISORY PANEL MEETING 2021
CURRICULUM FEEDBACK FORM

JABATAN PELANCONGAN DAN HOSPITALITI

Signature :
: SITI ZURAINI RAMLEY ALAN
Name :
Organization/ Institution/
Company Name :
Designation :
Email address :
Contact No. :
Date

Page 3 of 3

THANK YOU FOR YOUR FEEDBACK





Jabatan Kejuruteraan Mekanikal (JKM)

1. Diploma Kejuruteraan Mekanikal
2. Diploma Kejuruteraan Mekanikal Pembuatan
3. Diploma Kejuruteraan Mekatronik

MINIT MESYUARAT BERSAMA PANEL PENASIHAT PROGRAM DKM TAHUN 2021
JABATAN KEJURUTERAAN MEKANIKAL
POLITEKNIK KOTA KINABALU

Tarikh : 21 Oktober 2021

Masa : 10.00 pagi – 12.30 tengahari

Tempat : Secara atas talian ( Google meet)

Hadir:
1. Sylvester Gindan ( Ketua Jabatan Kejuruteraan Mekanikal)
2. Chicha Bagu ( Ketua Program DKM)
3. Ir. Ahmad bin Jafar @ Jaafar (Penasihat Program)
4. En Abdul Razak Bin Chuli (Penasihat Program)
5. En Abdul Razak Bin Mohd Salleh (Penasihat Program)
6. En Gerald Chui (Penasihat Program)
7. Ts. Ida Rosmanizan Binti Abdullah (Setiausaha)
8. Darman Bin Pawali (Moderator)
9. Abdul Razak Bin Mohd Daim (Pemudacara)
10. Rasidon Bin Rusitim (Teknikal dan Fotografi)
11. Roslee Ghani (Penyelaras Kursus DJJ50203)
12. Ts. Kevin Ligunjang (Penyelaras Kursus DJJ50212)

Tidak hadir:
1. En Irwan Bin Misalam (Penasihat Program)

I. PERUTUSAN PENGERUSI
1. Kata alu-aluan
Pengerusi mengucapkan selamat datang dan berterima kasih di atas kesudian para
pensyarah dan panel penasihat program DKM yang hadir ke mesyuarat. Pengerusi
memperkenalkan semua ahli mesyuarat yang hadir.
Makluman

2. Objektif Mesyuarat
Pengerusi memaklumkan tujuan mesyuarat iaitu membincangkan kurikulum serta
mendapatkan maklumbalas daripada pihak panel penasihat bagi 2 kursus teras
disiplin Program DKM iaitu Kursus DJJ50212 Maintenance Engineering And
Management dan Kursus DJJ50203 Troubleshooting And Maintenance For Mechanical
Components. Perbincangan dan maklumbalas ini diperlukan bagi penambahbaikan
dan pembangunan silibus bagi subjek tersebut. Pengerusi turut memaklumkan
aturcara mesyuarat pada kali ini.

Makluman

II. PEMBENTANGAN KURIKULUM DPA20043 COMPUTERIZED ACCOUNTING SYSTEM
3. Puan Chicha Bagu membentangkan kurikulum bagi kursus DJJ50212 Maintenance
Engineering And Management dan Kursus DJJ50203 Troubleshooting And
Maintenance For Mechanical Components. Antara hasil pembentangan daripada
Puan Chicha Bagu adalah seperti berikut:

3.1 Kursus yang dibincangkan merupakan kursus baharu yang diajar pada
pelajar semester 5, Diploma Kejuruteraan Mekanikal. Kursus ini juga
pertama kali diajar pada semester Sesi 1: 2021/2022.

3.2 Kedua-dua kursus ini dinilai pada berdasarkan Penilaian Berterusan
sepenuhnya melalui Kaedah Penilaian Kuiz, Ujian , Kajian Kes,
Pembentangan dan Praktikal.

3.3 Secara amnya, Kursus DJJ50212 mengandungi bahagian teori yang
membincangkan organisasi penyelenggaraan, sistem strategi
penyelenggaraan, pendekatan sistem untuk penyelenggaraan,
perancangan dan penjadualan penyelenggaraan dan penyelenggaraan
berkomputer sistem pengurusan (CMMS). Manakala Kursus DJJ50203 pula
mengandungi bahagian praktikal dan teori berkaitan topik prinsip
penyelenggaraan dan penyelesaian masalah dan prosedur, penghantaran
kuasa, galas dan pam.

Makluman

III. MAKLUM BALAS DARIPADA PANEL

4. Cadangan dan maklumbalas daripada panel, 1. Ir. Ahmad bin Jafar @ Jaafar:

4.1 Kursus DJJ50212 Maintenance Engineering And Management

4.1.1 Secara keseluruhannya beliau bersetuju adanya MaintenanceEngineering
And Management diajar di Politeknik Kota Kinabalu kerana kursus
tersebut sesuai kerana akan mendedahkan pelajar dalam pengurusan
penyelengaraan.

4.1.2 Ir mencadangkan agar memberi kefahaman yang lebih mendalam Pre
maintenance (Department, Crew, Government Authorities), Preparation
(Manpower, Spare part, Budget) and Post Maintenance (Discus and
Analysis).

4.1.3 Beliau juga mencadangkan agar silibus kursus diagihkan kepada system
dan component.

4.2 Kursus DJJ50203 Troubleshooting And Maintenance For Mechanical
Components
4.2.1 Secara keseluruhannya beliau bersetuju adanya Troubleshooting And
Maintenance For Mechanical Components diajar di Politeknik Kota
Kinabalu kerana kursus tersebut sesuai kerana banyak digunakan di
industri .
4.2.2 Ir mencadangkan agar basic troubleshooting dengan lebih mendalam
agar pelajar faham jenis-jenis troubleshooting.
4.2.3 Beliau juga berpendapat agar silibus kursus diagihkan kepada sistem dan
komponen. Pelajar perlu diberi kefahaman berkaitan dengan sistem
(Contoh: Sistem Pelincir) sebelum diajar bekaitan dengan komponen. Ini

kerana pengetahuan sistem sangat penting dalam proses
troubleshooting.
4.2.4 Ir juga mencadangkan agar diberi pelajar didedahkan pengetahuan
berkaitan dengan alignment work dan Lubrication Analysis.

Makluman

5. Cadangan dan maklumbalas daripada panel 2, En Gerald Chui:
5.1 Kursus DJJ50212 Maintenance Engineering And Management
Secara keseluruhannya beliau bersetuju bahawa Troubleshooting And
Maintenance For Mechanical Components perlu diajar di Politeknik Kota
Kinabalu kerana kursus tersebut sesuai kerana banyak digunakan di industri .

5.2 Kursus DJJ50203 Troubleshooting And Maintenance For Mechanical
Components
Beliau mencadangkan agar topik metal working lubrication fluid diajar bagi
memberi maklumat jenis-jenis pelincir yang digunakan dalam kerja-kerja
berkaitan mekanikal. Ini kerana ia akan mendedahkan pelajar kepada
keperluan dan kepentingan pelincir.
Makluman

6. Cadangan dan maklumbalas daripada panel 3, En Abdul Razak Bin Chuli:
6.1 Kursus DJJ50212 Maintenance Engineering And Management
Secara keseluruhannya beliau bersetuju kursus ini di ajar di Politeknik Kota
Kinabalu kerana pengetahuan berkaitan dengan pengurusan penyelenggaraan
ini banyak digunakan di semua industri .

6.2 Kursus DJJ50203 Troubleshooting And Maintenance For Mechanical
Components
Secara keseluruhannya beliau bersetuju adanya Troubleshooting And
Maintenance For Mechanical Components di ajar di Politeknik Kota Kinabalu
kerana kursus tersebut sesuai kerana banyak digunakan di industri .
Makluman

7. Cadangan dan maklumbalas daripada panel 4, En Abdul Razak Bin Mohd Salleh:
7.1 Kursus DJJ50212 Maintenance Engineering And Management
Beliau amat bersetuju pelajar diajar atau mengambil kursus Maintenance
Engineering And Management sebelum menjalani Latihan Industri.

7.2 Kursus DJJ50203 Troubleshooting And Maintenance For Mechanical
Components
7.2.1 Secara keseluruhannya beliau bersetuju adanya Troubleshooting And
Maintenance For Mechanical Components di ajar di Politeknik Kota
Kinabalu kerana kursus tersebut sesuai kerana banyak digunakan di
industri.
7.2.2 Beliau berpendapat troubleshooting perlu dijadikan subtopik bagi silibus
ini. Selain daripada itu beliau bersetuju dengan pendapat En. Gerald
berkaitan dengan perincian terhadap topik pelincir.
7.2.3 Beliau juga telah menawarkan agar pelajar datang ke syarikat beliau
untuk melakukan kerja-kerja berkaitan baikpulih enjin.

Makluman

IV. RUMUSAN PERBINCANGAN
8. Secara keseluruhan, para panel bersetuju bahawa kursus DJJ50212 Maintenance
Engineering And Management dan Kursus DJJ50203 Troubleshooting And
Maintenance For Mechanical Components. perlu diajar di semester 5 kerana pelajar
perlu mengetahui pengurusan penyenggaraan dan mengenalpasti masalah berkaitan
penyenggaraan.
9. Kandungan kursus DJJ50212 dapat membekalkan pengetahuan melibatkan
maintenance organization, maintenance strategies system, system approach to
maintenance, maintenance planning and scheduling and computerized maintenance
management system (CMMS) sangat bersesuaian dengan kehendak dan keperluan
industri.

10. Kandungan kursus DJJ50203 yang memberikan pengetahuan melibatkan
maintenance and troubleshooting principles and procedures, power transmission,
bearing and pump sangat bersesuaian dengan kehendak dan keperluan industri.
Makluman

V. PENUTUP
11. Pengerusi mengucapkan terima kasih kepada keempat-empat orang panel dan juga
pensyarah yang terlibat dalam mesyuarat kali ini. Pengerusi memaklumkan kepada
para panel agar mengisi Borang Maklum Balas yang telah disediakan. Mesyuarat
ditangguhkan pada jam 12.30 tengahari.

Disediakan oleh:

(Ts. Ida Rosmanizan Binti Abdullah)
Setiausaha Mesyuarat

Disemak oleh:

Ketua Program Diploma Kejuruteraan Mekanikal
(CHICHA BAGU)

SENARAI REKOD KEHADIRAN MESYUARAT IAP
PROGRAM DIPLOMA KEJURUTERAAN MEKANIKAL

TAHUN 2021

NAMA NO KAD PENGENALAN EMAIL TUGAS
ABDUL RAZAK BIN CHULI 740730-12-5053 [email protected] PANEL PENASIHAT
ABDUL RAZAK MOHD SALLEH 650806-12-5553 [email protected] PANEL PENASIHAT
AHMAD BIN JAAFAR @ JAAFAR 640706-12-5565 PANEL PENASIHAT
GERALD CHUI 920921-12-5185 [email protected] PANEL PENASIHAT
SYLVESTER GINDAN 760411-12-5281 [email protected] KETUA JABATAN
CHICHA BAGU 811018-12-5098 [email protected] KETUA PROGRAM
IDA ROSMANIZAN BINTI ABDULLAH 760514-03-5510 [email protected] AJK PELAKSANA
ROSLEE BIN GHANI 711201-12-5151 [email protected] AJK PELAKSANA
DARMAN BIN PAWALI 851107-12-5299 [email protected] AJK PELAKSANA
ABDUL RAZAK BIN MOHD DAIM 760807-12-5077 [email protected] AJK PELAKSANA
TS KEVIN LIGUNJANG 811019-12-6105 [email protected] AJK PELAKSANA
[email protected]







Scanned with DocScan

Scanned with DocScan