NORM TEKNİK GENEL KATALOG

Yangın Korunum Sistemleri Tanıtım ve Kalite Belgeleri

Sulu Söndürme Sistemleri

Yangın Pompaları

Yangın Dolapları Yangın Dolapları

Gazlı Söndürme Sistemleri
Su Sisi Söndürme Sistemleri

Algılama ve İhbar Sistemleri
Köpüklü Söndürme Sistemleri

Fire Systems Davlumbaz Söndürme Sistemleri

A UTC F re & Secur ty Company

Yangın Korunum Sistemleri EN Sertifikalı, UL Listeli
Yangın/Duman Kontrol Damperleri

Referanslar ve İş Bitirme
Referanslarımızdan Bazıları

Yangın Korunum Sistemleri

Tanıtım ve Kalite Belgeleri



















TÜRK STANDARDLARI ENSTİTÜSÜ

TÜRK STANDARDLARINA UYGUNLUK BELGESİ

TURKISH STANDARDS INSTITUTION

CERTIFICATE OF CONFORMITY TO TURKISH STANDARDS

BELGE NUMARASI 013394-TSE-02/02
REFERENCE NUMBER OF LICENCE

BELGENİN İLK VERİLİŞ TARİHİ 17.04.2014
DATE OF FIRST ISSUE OF LICENCE 07.05.2022

BELGENİN SON GEÇERLİLİK TARİHİ
LICENCE VALID UNTIL

BELGE SAHİBİ KURULUŞUN ADI NORM TEKNİK MALZEME TİCARET İNŞAAT SANAYİ A.Ş.
NAME OF THE LICENCE HOLDER

BELGE SAHİBİ KURULUŞUN ADRESİ EYÜP SULTAN MAH. BAŞKENT CAD. NO:6 /1 SANCAKTEPE
ADRESS OF THE LICENCE HOLDER İSTANBUL/TÜRKİYE

ÜRETİM YERİ ADI NORM TEKNİK MALZEME TİCARET İNŞAAT SANAYİ ANONİM
NAME OF THE MANUFACTURING PLACE ŞİRKETİ

ÜRETİM YERİ ADRESİ İSTANBUL MERMERCİLER SANAYİ SİTESİ 3. CADDE NO:22 (135
ADRESS OF THE MANUFACTURING PLACE ADA 3 PARSEL )
KÖSELER MAHALLESİ /DİLOVASI / KOCAELİ / TÜRKİYE

İPTAL EDİLEN BELGE NUMARASI (Varsa) 013394-TSE-02/01
INDICATION OF SUPERSEDED LICENCE (if any) normeks şekil
TS EN 671-2 / 05.06.2012
TESCİLLİ TİCARİ MARKASI
REGISTERED TRADE MARK

İLGİLİ TÜRK STANDARDI
RELATED TURKISH STANDARD

BELGE KAPSAMI
SCOPE OF LICENCE

●SABİT YANGIN SÖNDÜRME SİSTEMLERİ - YASSI HORTUMLU HORTUM SİSTEMLERİ
AZAMİ 1,2 MPA ÇALIŞMA BASINCINDAKİ HORTUMUN İÇ ÇAPI EN FAZLA 52 mm OLAN, NOZUL/EŞDEĞER
ÇAP 9 mm, HORTUM UZUNLUĞU EN FAZLA 20 m OLAN, HORTUM MESNEDİ TİP1 ve TİP3 OLAN ,ELLE
KUMANDALI HAREKETLİ HORTUM MAKARALARI

e-imzalı/e-signed

20.04.2021

Belgelendirme Merkezi Başkanı Adına
AHMET NURSİ KARTAL

TSE İSTANBUL BELGELENDİRME MÜDÜRÜ

*Bu belge, belgelendirilen ürünün, üretim yerinin Enstitümüzün belirlediği şartları karşıladığını da gösterir.
*Bu belge, hiç bir suretle tahrif edilemez, kısmen veya okunmasını zorlaştıracak şekilde çoğaltılamaz, kazıntı ve silinti yapılamaz.
*TSE İSTANBUL BELGELENDİRME MÜDÜRLÜĞÜ * Adres: Çayırova Tren İstasyonu Yanı ÇAYIROVA/GEBZE * Telefon: 2627231273* Faks: 2627231606
*TSE BELGELENDİRME MERKEZ BAŞKANLIĞI; Adres: Necatibey Cad. No:112 06100 Bakanlıklar/ANKARA – Telefon: 0 312 416 64 81 / 416 64 27, Faks:0 312 416 66 17 E-posta
:[email protected] , web : www.tse.org.tr

https://evrakkontrol.tse.org.tr/BelgeDogrulama.aspx?p=wur8viog adresinden belgenin doğruluğunu ve geçerliliğini sorgulayınız. 1/1

TÜRK STANDARDLARI ENSTİTÜSÜ

TÜRK STANDARDLARINA UYGUNLUK BELGESİ

TURKISH STANDARDS INSTITUTION

CERTIFICATE OF CONFORMITY TO TURKISH STANDARDS

BELGE NUMARASI 013394-TSE-01/02
REFERENCE NUMBER OF LICENCE

BELGENİN İLK VERİLİŞ TARİHİ 21.03.2014
DATE OF FIRST ISSUE OF LICENCE 07.05.2022

BELGENİN SON GEÇERLİLİK TARİHİ
LICENCE VALID UNTIL

BELGE SAHİBİ KURULUŞUN ADI NORM TEKNİK MALZEME TİCARET İNŞAAT SANAYİ A.Ş.
NAME OF THE LICENCE HOLDER

BELGE SAHİBİ KURULUŞUN ADRESİ EYÜP SULTAN MAH. BAŞKENT CAD. NO:6 /1 SANCAKTEPE
ADRESS OF THE LICENCE HOLDER İSTANBUL/TÜRKİYE

ÜRETİM YERİ ADI NORM TEKNİK MALZEME TİCARET İNŞAAT SANAYİ ANONİM
NAME OF THE MANUFACTURING PLACE ŞİRKETİ

ÜRETİM YERİ ADRESİ İSTANBUL MERMERCİLER SANAYİ SİTESİ 3. CADDE NO:22 (135
ADRESS OF THE MANUFACTURING PLACE ADA 3 PARSEL )
KÖSELER MAHALLESİ /DİLOVASI / KOCAELİ / TÜRKİYE

İPTAL EDİLEN BELGE NUMARASI (Varsa) 013394-TSE-01/01
INDICATION OF SUPERSEDED LICENCE (if any) normeks şekil
TS EN 671-1:2012(EN) / 05.06.2012
TESCİLLİ TİCARİ MARKASI
REGISTERED TRADE MARK

İLGİLİ TÜRK STANDARDI
RELATED TURKISH STANDARD

BELGE KAPSAMI
SCOPE OF LICENCE

*SABİT YANGIN SÖNDÜRME SİSTEMLERİ;
-YARI SERT HORTUMLU HORTUM MAKARALARI “HORTUM ÇAPI: 25 mm HORTUM UZUNLUĞU EN FAZLA: 30
m OLAN, ELLE KUMANDALI HAREKETLİ HORTUM MAKARALARI,

e-imzalı/e-signed

20.04.2021

Belgelendirme Merkezi Başkanı Adına
AHMET NURSİ KARTAL

TSE ISTANBUL BELGELENDİRME MÜDÜRÜ

*Bu belge, belgelendirilen ürünün, üretim yerinin Enstitümüzün belirlediği şartları karşıladığını da gösterir.
*Bu belge, hiç bir suretle tahrif edilemez, kısmen veya okunmasını zorlaştıracak şekilde çoğaltılamaz, kazıntı ve silinti yapılamaz.
*TSE İSTANBUL BELGELENDİRME MÜDÜRLÜĞÜ * Adres: Çayırova Tren İstasyonu Yanı ÇAYIROVA/GEBZE * Telefon: 2627231273* Faks: 2627231606
*TSE BELGELENDİRME MERKEZ BAŞKANLIĞI; Adres: Necatibey Cad. No:112 06100 Bakanlıklar/ANKARA – Telefon: 0 312 416 64 81 / 416 64 27, Faks:0 312 416 66 17 E-posta
:[email protected] , web : www.tse.org.tr

https://evrakkontrol.tse.org.tr/BelgeDogrulama.aspx?p=cdhn810f adresinden belgenin doğruluğunu ve geçerliliğini sorgulayınız. 1/1





trTSU. TECHNICKY SKUSOBNY USTAV PIESTANY, s.p. EsNAs
Krajinska cesta 2929/9
Reg. No.009/P-018
92101 Piešt'any' Slovak Republic
Notified body No. 1299

CERTIFICATE OF CONSTANCY OF PERFORMANCE
1299-cPR-0í55

ln compliance with Regulation 30512011/EU of the European Parliament and of the Council
of 9 March 2011 (the Construction Products Regulation or CPR), this certificate applies
to the construction product

Fire hose system with lay-flat hose d = 52 mm

Type: C52

Model: GYM, G2YM, SYM, S2YM, DSH

(specification is stated on the back page)

suitable for prime quenching of fire in buildings and other construction works permanently connected to
a water supply and allows system operation by one person,

placed on the market under the name of

NoRM TEKN|K MALZEME TIGARET iľ$neľsAN. ANoNIM $IRKET!

EyÚp Sultan Mah. Bagkent cad. No: 6/í, 34885 Sancaktepe/isTANBuL, Turkey

and produced in the manufacturing plant

NoRM TEKNIK MALZEME TiCARET iľ$nnr sAN. ANoNlM $IRKETI

istanbuI Mermerciler sanayi Sitesi 3. cadde No:22 (135 ada 3 parsel) Koseleľ MahalIesi
Dilovas/Kocaeli-Tu rkey

This certificate attests that,^?j.l{:ľľJ*?,t:"J?lT.lH-TiTiiil:1Tnd verification of constancy

EN 67í_ĺ:2012

under system 1 for the performance set out in this certificate are applied and that the factory production
control conducted by the manufacturer is assessed to ensure the

constancy of peŕoľmance of the construction product.

This certificate was first issued on July 24th,2015 and will remain valid as long as neither
the harmonised standard, the construction product, the AVCP methods nor the manufacturing conditions
in the plant are modified significantly, unless suspended or withdrawn by the notified product certification

body.

The certificate shall be supported through annual continuous surveillance and reissued after each
surveillance. This certificate shall be reissued not later than May 16th, 2022. A new issue of the certificate

is conditioned by positive results of the surveillance.

PiešťanyMay Sth, 2021 lng. Dušan HANKO

lssue: 7 on behalf of TSU Piestany, š.p.
Notified body 1299
13 4144

o PRoMPt' tlačiaťeňcenin, a's'' Bratislava

I

Components specification:

1. lnlet stop valve:
2. dimension: G2" (C52), PN 16, brass, manufacturer / supplier: Gnutti Cirillo S.p.A, ltaly

Lay-flat hose'
dimension: 52 mm (C52), manufacturer / supplier: Kuleli Hortum ve Yangin Malz. San. Tic. As.,
Turkey
3. Gombined nozzle:
equiv. diameter:'l 3, manufacturer / supplier: Bareks Yangin Karsi, Turkey
4. Cabinet and reel: manufacturer / supplĺer: Norm Teknik Malzeme Ticaret lnsaat San', Anonim $irketi,
Turkey

--Mijsnepitmra8uy9m: (1lK/2m0-ĺn(cl./oMmePfaifn-ic1.Mi/e2Pn)ta-fIot\r configuration

Minimum flow rate: (MPa/l.min-') 0,41179

trTSU. TECHNICKY SKUSOBNY USTAV PIESTANY, s.p. 9sNAs
Krajinska cesta 2929/9
Reg. No.009/P-018
92101 Piešt'any' Slovak Republic
Notified body No. í299

CERTIFICATE OF CONSTANCY OF PERFORMANCE
1299 - cPR _ 0í 60

ln compliance with Regulation 30512011/EU of the European Parliament and of the Council
of 9 March 2011 (the Construction Products Regulation or CPR), this certificate applies
to the construction product

Fire hose system with semi-rigid hose d = 25 mm

Model: HMD, sí, s2, s2-iv, s12,s22, s22-R2T, s22-YT, G1,Ga,G2_IV, G12,G22,G22-R2T

and G22-YT
(specification is stated on the back page)
suitable for prime quenching of fire in buildings and other construction works permanently connected to
a water supply and allows system operation by one person,

placed on the market under the name of
NoRM TEKNIK MALZEME TIGARET iru$nnľ sAN. ANoNlM $IRKETI
Eytip Sultan Mah. Bagkent Cad. No: 6/1, 34885 Sancaktepe/isTANBUL, Turkey

and produced in the manufacturing plant

NoRM TEKNIK MALZEME TIGARET ilĺ$lĺrsAN. ANoNlM $lRKETl

istanbul Mermerciler Sanayi Sitesi 3. cadde No:22 (í35 ada 3 parset) Koseler Mahallesi
Di lovas/Kocaeli-Tu rkey

This certificate attests tháŕj.H:#:"ff#,[:"J?'lT,lľ-TiTiiil::fffiJ,.:'.f.at.n of constancy

EN 67ĺ_1 :2012

under system 1 for the performance set out in this certificate are applied and that the factory production
control conducted by the manufacturer is assessed to ensure the

constancy of peŕormance of the construction pľoduct.

This certificate was first issued on September 29th, 2015 and will remain valid as long as neither
the harmonised standard, the construction product, the AVCP methods nor the manufacturing conditions
in the plant are modified significantly, unless suspended or withdrawn by the notified product certification

body.

The certificate shall be supported through annual continuous surveillance and reissued after each
surveillance. This certificate shall be reissued not later than May 16th, 2022. A new issue of the certificate

is conditioned by positive results of the surveillance.

PieŠťanyMay Sth, 2021 lng. Dušan HANKo
on behalf of TSU Piestany, Š.p
lssue: 7
Notified body 1299
13 4145

'o PRoMPt' tlačiarcň ccnin' a.s.. Bľatislava

Components specification: l
1. lnlet stop valve:
dimension : G2", PN 16, manufacturer: Gnuti Cirillo S.p.A., ltaly

2. lnlet stop ball valve::
dimension : G1", PN 16, manufacturer: KAYALAR PRES. LTD., lstanbul, Turkey
3. Semirigid hose:
d = 25 mm, manufacturer : Qelik Kauguk ve Plastik Hortum San. ve Tic. Ltd. $ti., Turkey
4. combined nozzle'.
equivalent diameter : 9, rnanufacturer: Tour & Anderson AB, Sweden
5. Cabinet and reel:
manufacturer: Fatih Metal, Turkey

-Minimum K - coefficient for confiquration

- sjeptr:ay4:2(3l/9mi(nl/.MmPina-.M1/P2a) --",^')

Sulu Söndürme Sistemleri

Victaulic® FireLock™ Series FL-SR 41.51
Standard Coverage, Standard Response
Upright Pendent and Recessed Pendent Sprinklers,
K2.8 (4.0), K4.2 (6.1), K5.6 (8.1), K8.0 (11.5)

1.0  PRODUCT DESCRIPTION

STANDARD RESPONSE UPRIGHT SPRINKLERS

SIN V2861 V4261 V2703 V3401
ORIENTATION UPRIGHT
UPRIGHT UPRIGHT UPRIGHT 8.0 Imp./11.5 S.I.
K-FACTOR1 3/4" NPT/20mm BSPT/IGS
CONNECTION 2.8 Imp./4.0 S.I. 4.2 Imp./6.1 S.I. 5.6 Imp./8.1 S.I. 175 psi (1200 kPa)

MAX. WORKING PRESSURE 1/2" NPT/15mm BSPT 1/2" NPT/15mm BSPT 1/2" NPT/15mm BSPT/IGS GL8164

GLOBE RE-DESIGNATION 175 psi (1200 kPa) 175 psi (1200 kPa) 175 psi (1200 kPa) V3405
GLOBE EQUIVALENT cULus 250 psi (1725 kPa) PENDENT
8.0 Imp./11.5 S.I.
SIN GL2861 GL4261 3/4" NPT/20mm BSPT/IGS
ORIENTATION 175 psi (1200 kPa)
GL5661
K-FACTOR1 GL8156
CONNECTION STANDARD RESPONSE PENDENT SPRINKLERS
V3405
MAX. WORKING PRESSURE V2851 V4251 V2707 PENDENT
8.0 Imp./11.5 S.I.
GLOBE RE-DESIGNATION PENDENT PENDENT PENDENT 3/4" NPT/20mm BSPT
GLOBE EQUIVALENT 175 psi (1200 kPa)
2.8 Imp./4.0 S.I. 4.2 Imp./6.1 S.I. 5.6 Imp./8.1 S.I. Recessed
SIN
ORIENTATION 1/2" NPT/15mm BSPT 1/2" NPT/15mm BSPT 1/2" NPT/15mm BSPT/IGS GL8156

K-FACTOR1 175 psi (1200 kPa) 175 psi (1200 kPa) 175 psi (1200 kPa) V34
CONNECTION cULus 250 psi (1725 kPa) ■
■
MAX. WORKING PRESSURE GL2851 GL4251

ESCUTCHEON GL5651
GLOBE RE-DESIGNATION
STANDARD RESPONSE RECESSED PENDENT SPRINKLERS
GLOBE EQUIVALENT
V2851 V4251 V2707
SPRINKLER PENDENT PENDENT
UPRIGHT 2.8 Imp./4.0 S.I. 4.2 Imp./6.1 S.I. PENDENT
PENDENT 1/2" NPT/15mm BSPT 1/2" NPT/15mm BSPT 5.6 Imp./8.1 S.I.
1/2" NPT/15mm BSPT
175 psi (1200 kPa) 175 psi (1200 kPa)
175 psi (1200 kPa)
cULus 250 psi (1725 kPa)

Recessed Recessed Recessed
GL2851 GL4251 GL5651

AVAILABLE GUARDS/SHIELDS
V28 V42 V27

■

■

ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.

victaulic.com © 2021 Victaulic Company. All rights reserved.

41.51 16372 Rev A Updated 02/2021 1

victaulic.com
1.0  PRODUCT DESCRIPTION (CONTINUED)

SPRINKLER V56-2 Recessed V56 Open End AVAILABLE WRENCHES V34-2 Recessed V34 Open End 3/16 Hex-Bit
■ V27-2 Recessed V27 Open End ■ ■
V2861 and V4261 ■ ■
■ ■ ■
V2703 and V2707
■■ ■
V3401 ■

V2851 and V4251 ■

V2707

V3405

Factory Hydrostatic Test: 100% @ 500 psi/3447 kPa/34 bar

Min. Operating Pressure: U L/FM: 7psi/48 kPa/.5 bar
VdS: 5psi/35 kPa/.35 bar (Upright only)

Temperature Rating: See tables in section 2.0

1 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

41.51 16372 Rev A Updated 02/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 2

victaulic.com
2.0 CERTIFICATION/LISTINGS

UPRIGHT APPROVALS/LISTINGS

SIN V2861 V4261 V2703 V3401
Nominal K Factor Imperial 2.8 8.0
4.0 4.2 5.6 11.5
Nominal K Factor S.I.2 6.1 8.1
Orientation UPRIGHT UPRIGHT UPRIGHT UPRIGHT
135°F/57°C
cULus 155°F/68°C Approved Temperature Ratings F°/C° 135°F/57°C
175°F/79°C 155°F/68°C
FM 200°F/93°C 135°F/57°C 135°F/57°C 175°F/79°C
286°F/141°C 155°F/68°C 155°F/68°C 200°F/93°C
LPCB 360°F/182°C 175°F/79°C 175°F/79°C 286°F/141°C
200°F/93°C 200°F/93°C 360°F/182°C
CE – 286°F/141°C 286°F/141°C
360°F/182°C 360°F/182°C 135°F/57°C
VdS – 500°F/260°C 155°F/68°C
CCC 175°F/79°C
ZSTZ-15 – 135°F/57°C 200°F/93°C
155°F/68°C 286°F/141°C
– 175°F/79°C 360°F/182°C
– 200°F/93°C 135°F/57°C
– 155°F/68°C
286°F/141°C 175°F/79°C
360°F/182°C 200°F/93°C
286°F/141°C
135°F/57°C 360°F/182°C
155°F/68°C 135°F/57°C
175°F/79°C 155°F/68°C
– 200°F/93°C 175°F/79°C
200°F/93°C
286°F/141°C 286°F/141°C
360°F/182°C 135°F/57°C
155°F/68°C
135°F/57°C 175°F/79°C
155°F/68°C 200°F/93°C
– 175°F/79°C 286°F/141°C
200°F/93°C 155°F/68°C
286°F/141°C
–
135°F/57°C –
155°F/68°C 286°F/141°C
– 175°F/79°C
200°F/93°C
286°F/141°C

155°F/68°C
175°F/79°C
– 200°F/93°C

286°F/141°C

2 For K-Factor when pressure is measured in Bar, multiply S.I. units by 10.

NOTES
• Listings and approval as of printing.
• Where cULus Listed, Polyester and VC-250 Coatings Listed as Corrosion Resistant (V3401 with VC-250 Only)
• Where FM Approved, VC-250 Coating Approved as Corrosion Resistant
• New York City Acceptance - All UL Listed and/or FM Approved sprinklers acceptable to NYC per section 28-113 of the Administrative Code and the OTCR Rule.

41.51 16372 Rev A Updated 02/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 3

victaulic.com
2.0  CERTIFICATION/LISTINGS (CONTINUED)

PENDENT APPROVALS/LISTINGS

SIN V2851 V4251 V2707 V3405
Nominal K Factor Imperial 2.8 8.0
4.0 4.2 5.6 11.5
Nominal K Factor S.I.2 6.1 8.1
Orientation PENDENT PENDENT PENDENT PENDENT
Escutcheon Flush|Extended Flush|Extended Flush|Extended Flush|Extended

cULus 135°F/57°C Approved Temperature Ratings F°/C° 135°F/57°C
155°F/68°C 155°F/68°C
FM 175°F/79°C 135°F/57°C 135°F/57°C 175°F/79°C
200°F/93°C 155°F/68°C 155°F/68°C 200°F/93°C
CCC 286°F/141°C 175°F/79°C 175°F/79°C 286°F/141°C
ZSTX-15 360°F/182°C 200°F/93°C 200°F/93°C 360°F/182°C
286°F/141°C 286°F/141°C
– 360°F/182°C 360°F/182°C 135°F/57°C
500°F/260°C 155°F/68°C
– 175°F/79°C
135°F/57°C 200°F/93°C
155°F/68°C 286°F/141°C
175°F/79°C 360°F/182°C
– 200°F/93°C 155°F/68°C

286°F/141°C –
360°F/182°C –
286°F/141°C
155°F/68°C
175°F/79°C
– 200°F/93°C

286°F/141°C

RECESSED PENDENT APPROVALS/LISTINGS

SIN V2851 V4251 V2707 V3405
Nominal K Factor Imperial 8.0
2.8 4.2 5.6 11.5
Nominal K Factor S.I.2 4.0 6.1 8.1
Orientation PENDENT PENDENT PENDENT PENDENT
Escutcheon Recessed Recessed Recessed Recessed

cULus Approved Temperature Ratings F°/C° 135°F/57°C
155°F/68°C
FM 135°F/57°C 135°F/57°C 135°F/57°C 175°F/79°C
With 1/2" Adjustment 155°F/68°C 155°F/68°C 155°F/68°C 200°F/93°C
175°F/79°C 175°F/79°C 175°F/79°C
Escutcheon Only 200°F/93°C 200°F/93°C 200°F/93°C 135°F/57°C
286°F/141°C 286°F/141°C 155°F/68°C
CCC 175°F/79°C
ZSTX-15 135°F/57°C 200°F/93°C
155°F/68°C 155°F/68°C
– – 175°F/79°C
–
200°F/93°C –
286°F/141°C
155°F/68°C
175°F/79°C
– – 200°F/93°C

286°F/141°C

2 For K-Factor when pressure is measured in Bar, multiply S.I. units by 10.

NOTES
• Listings and approval as of printing.
• Where cULus Listed, Polyester and VC-250 Coatings Listed as Corrosion Resistant (V3401 with VC-250 Only)
• Where FM Approved, VC-250 Coating Approved as Corrosion Resistant
• New York City Acceptance - All UL Listed and/or FM Approved sprinklers acceptable to NYC per section 28-113 of the Administrative Code and the OTCR Rule.

41.51 16372 Rev A Updated 02/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 4

victaulic.com De ector 1 ⁄ "/
40 mm
3.0  SPECIFICATIONS – MATERIAL Load screw
Deflector: Bronze Bulb 2¼"/
Bulb Nominal Diameter: 5.0mm 57 mm
Load Screw: Bronze Pip cap and
Pip Cap: Bronze spring seal
Spring Seal: PTFE coated Beryllium nickel alloy Lodgement spring
Frame: Brass
Lodgement Spring: Stainless steel Frame
Installation Wrench: Ductile iron
Sprinkler Frame Finishes: ⁄ "/11 mm
• Plain brass Nominal make-in
• Chrome plated V2861, V4261
• White polyester painted3, 4
• Flat black polyester painted3, 4 1 ⁄ "/
• Custom polyester painted3, 4 37 mm
• VC-2505
De ector 2 ⁄ "/
3 Not available on the Intermediate Level Style Pendent. Load screw 60 mm
4 UL Listed for corrosion resistance.
5 UL Listed and FM Approved for corrosion resistance. Bulb
Pip cap and
NOTE spring seal
• For cabinets and other accessories refer to separate sheet. Lodgement spring

Frame

⁄ "/11 mm
Nominal make-in

V2703

De ector 1 ⁄ "/ ⁄ "/11 mm
37 mm Nominal make-in
Load screw
Bulb 2½"/ Lodgement spring 2 ⁄ "/
63 mm Pip cap and 58 mm
Pip cap and spring seal 1¼"/
spring seal Bulb 31 mm
Lodgement spring Load screw
Frame
Frame
De ector

½"/13 mm
Nominal make-in

V3401 V2851, V4251

⁄ "/11 mm ½"/13 mm
Nominal make-in Nominal make-in

Frame 2 ⁄ "/ Frame 2½"/
Lodgement spring 60 mm Lodgement spring 63 mm

Pip cap and 1"/ Pip cap and
spring seal 25 mm spring seal
V2707
Bulb Bulb
Load screw Load screw

De ector De ector

1 ⁄ "/
33 mm
V3405

41.51 16372 Rev A Updated 02/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 5

victaulic.com 2 ⁄ "/60 mm
4.0 DIMENSIONS 2"/51 mm
Hole in ceiling
⁄ "/22 mm Max. (¾" Adj.)
⁄ "/16 mm Max. (½" Adj.)

⁄ "/3 mm Min.

1 ⁄ "/47 mm Max 2 ⁄ "/75 mm Typical ceiling
1 ⁄ "/29 mm Min. (¾" Adj.) Finished surface
1 ⁄ "/34 mm Min. (½" Adj.). V2851, V4251
1"/25 mm Max. (¾" Adj.) 2 ⁄ "/60 mm Typical ceiling
¾"/19 mm Max. (½" Adj.) 2"/51 mm Finished surface
Hole in ceiling
¼"/6 mm Min. Typical ceiling
Finished surface
1 ⁄ "/30 mm Min. (½" Adj.) 2 ⁄ "/75 mm
⁄ "/24 mm Min. (¾" Adj.)
1 ⁄ "/43 mm Max. V2707
⁄ "/22 mm Max. (¾" Adj.) 2 ⁄ "/60 mm
⁄ "/16 mm Max. (½" Adj.) 2"/51 mm
⁄ "/3 mm Min. Hole in ceiling

1 ⁄ "/29 mm Min. (¾" Adj.)
1 ⁄ "/34 mm Min. (½" Adj.)

1 ⁄ "/47 mm Max.

2 ⁄ "/75 mm
V3405

41.51 16372 Rev A Updated 02/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 6

Victaulic® FireLock™ Series FL-SR/C 41.53
Standard Coverage, Standard Response
Concealed Pendent Sprinklers K5.6 (8.1)

1.0  PRODUCT DESCRIPTION

STANDARD RESPONSE CONCEALED PENDENT SPRINKLERS

SIN V5653 V3801 V3807
ORIENTATION Concealed Pendent
Concealed Pendent Concealed Pendent
K-FACTOR1 5.6 Imp./8.1 S.I.
CONNECTION 5.6 Imp./8.1 S.I. 5.6 Imp./8.1 S.I. 1/2” NPT/15mm BSPT
MAX. WORKING PRESSURE 1/2” NPT/15mm BSPT 1/2” NPT/15mm BSPT 300psi (2068 kPa)
ESCUTCHEON
GLOBE RE-DESIGNATED 175 psi (1200 kPa) 175 psi (1200 kPa) Concealed
GLOBE EQUIVALENT –
Concealed Concealed
GL5653 – GL5655

– GL5654 V38 Concealed
■
AVAILABLE WRENCHES
V38 Concealed
SPRINKLER 1" ADJ Concealed V38 Concealed ■
PENDENT
■■

CLEAN ROOM GASKET

SPRINKLER 1" ADJ Concealed V38 Concealed
PENDENT
■■

Factory Hydrostatic Test: 100% @ 500 psi/3447 kPa/34 bar
Min. Operating Pressure: UL/FM: 7psi/48 kPa/.5 bar
Temperature Rating: See tables in section 2.0

1 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.

victaulic.com © 2021 Victaulic Company. All rights reserved.

41.53 16374 Rev B Updated 04/2021 1

victaulic.com
2.0 CERTIFICATION/LISTINGS

APPROVALS/LISTINGS

SIN V5653 COVER PLATE V3801 V3807 COVER PLATE
Nominal K Factor Imperial 5.6 –
8.1 – 5.6 5.6 –
Nominal K Factor S.I.2 8.1 –
Orientation Pendent – 8.1 Pendent –
Escutcheon Concealed Concealed
– Pendent 135°F/57°C
cULus 135°F/57°C 135°F/57°C
155°F/68°C – Concealed 165°F/74°C
LPCB 175°F/79°C 165°F/74°C
200°F/93°C Approved Temperature Ratings F°/C° 138°F/59°C
CE 165°F/74°C
CCC – 135°F/57°C 135°F/57°C 135°F/57°C 165°F/74°C
ZSTDY-15 135°F/57°C | 155°F/68°C 155°F/68°C 155°F/68°C 138°F/59°C
– 175°F/79°C 175°F/79°C 165°F/74°C
155°F/68°C 200°F/93°C 200°F/93°C 165°F/74°C
155°F/68°C
135°F/57°C
155°F/68°C
– 175°F/79°C –

200°F/93°C

155°F/68°C
– 175°F/79°C –

200°F/93°C

155°F/68°C

APPROVALS/LISTINGS WITH CLEAN ROOM GASKET

SIN V56533 COVER PLATE V3801 V3807 COVER PLATE
Nominal K Factor Imperial 5.6 –
8.1 – 5.6 5.6 –
Nominal K Factor S.I.2 –
Orientation Pendent – 8.1 8.1 –
Escutcheon Concealed
– Pendent Pendent 135°F/57°C
cULus 135°F/57°C 135°F/57°C
155°F/68°C – Concealed Concealed 165°F/74°C
175°F/79°C 165°F/74°C
200°F/93°C Approved Temperature Ratings F°/C°

135°F/57°C 135°F/57°C 135°F/57°C
135°F/57°C | 155°F/68°C 155°F/68°C 155°F/68°C
175°F/79°C 175°F/79°C
155°F/68°C 200°F/93°C 200°F/93°C
155°F/68°C

2 For K-Factor when pressure is measured in Bar, multiply S.I. units by 10.
3 Clean room gasket only available with 2 3/4" diameter cover plate.

NOTES
• Listings and approval as of printing.
• New York City Acceptance - All UL Listed and/or FM Approved sprinklers acceptable to NYC per section 28-113 of the Administrative Code and the OTCR Rule.

41.53 16374 Rev B Updated 04/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 2

victaulic.com

3.0  SPECIFICATIONS – MATERIAL

Deflector: Bronze 2 ⁄ "/60 mm
2"/51 mm
Bulb Nominal Diameter: 5.0 mm Hole in ceiling

Load Screw: Brass 1 ⁄ "/
48 mm
Pip Cap: Brass
2¾"/70 mm
Spring Seal: PTFE coated Beryllium nickel alloy V5653

Frame: Brass Cup 2 ⁄ "/68 mm
Concealed Cup: Steel Pip cap and 2 ⁄ "/60 mm
Hole in ceiling
Cover Plate: Steel spring seal
Lodgement Spring: Stainless Steel
Lodgement Spring
Bulb

Pin: Stainless Steel Frame 2¾"/70 mm
Load Screw 1 ⁄ "/47 mm

Installation Wrench: Ductile Iron De ector

Sealing Gasket: White nitrile (CLEAN ROOM USE ONLY) Pin Typical ceiling

Cover Plate Finishes:

• Chrome plated Cover plate Finished surface ⁄ "/
• White painted 4 mm

• Flat black painted

• Custom painted

NOTE
• For cabinets and other accessories refer to separate sheet.

Cup 2 ⁄ "/61 mm
Typical ceiling 1 ⁄ "/48 mm
Lodgement Spring
Pip cap and
spring seal
Bulb
Frame
Pin
Load Screw

Cover plate De ector Finished surface

3¼"/82 mm

V3801, V3807

41.53 16374 Rev B Updated 04/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 3

victaulic.com
4.0 DIMENSIONS

2¼"/57 mm
2"/51 mm
Hole in ceiling

1 ⁄ "/
48 mm

2¾"/70 mm
1 ⁄ "/47 mm

1¼"/32 mm Finished surface
¼"/6 mm

3 ⁄ "/87 mm ⁄ "/
Clean Room Coverplate 5 mm

Activated Position V5653
V5653
2 ⁄ "/73 mm
4"/102 mm 2"/51 mm
3 ⁄ "/98 mm Hole in ceiling
Hole in ceiling
1 ⁄ "/
1 ⁄ "/ 48 mm
48 mm

2¾"/70 mm 2¾"/70 mm
1 ⁄ "/47 mm 1 ⁄ "/47 mm

4½"/114 mm ⁄ "/ 3 ⁄ "/84mm ⁄ "/
4 mm 4 mm
Seismic Coverplate Large Coverplate
V5653 V5653

⁄ "/2 mm Min.
⁄ "/14 mm Max.

V3801, V3807

41.53 16374 Rev B Updated 04/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 4

Victaulic® FireLock™ Series FL-SR/SW 41.52
Standard Coverage, Standard Response
Horizontal Sidewall and Recessed Horizontal Sidewall
Sprinklers, K2.8 (4.0), K4.2 (6.1), K5.6 (8.1), K8.0 (11.5)

1.0  PRODUCT DESCRIPTION

STANDARD RESPONSE HORIZONTAL SIDEWALL

SIN V2870 V4270 V2709 V3409
ORIENTATION Horizontal Sidewall
Horizontal Sidewall Horizontal Sidewall Horizontal Sidewall
K-FACTOR1 8.0 Imp./11.5 S.I.
CONNECTION 2.8 Imp./4.0 S.I. 4.2 Imp./6.1 S.I. 5.6 Imp./8.1 S.I. 3/4" NPT/ 20mm BSPT/IGS
MAX WORKING PRESSURE
GLOBE RE-DESIGNATION 1/2” NPT/15mm BSPT 1/2” NPT/15mm BSPT 1/2” NPT/15mm BSPT/IGS 175 psi (1200 kPa)
GLOBE EQUIVALENT –
175 psi (1200 kPa) 175 psi (1200 kPa) 175 psi (1200 kPa)
SIN GL8171
ORIENTATION GL2870 GL4270 –
V3409
K-FACTOR1 – – GL5670 Horizontal Sidewall
CONNECTION
MAX WORKING PRESSURE STANDARD RESPONSE RECESSED HORIZONTAL SIDEWALL 8.0 Imp./11.5 S.I.
ESCUTCHEON 3/4" NPT/ 20mm BSPT
GLOBE RE-DESIGNATION V2870 V4270 V2709
GLOBE EQUIVALENT 175 psi (1200 kPa)
Horizontal Sidewall Horizontal Sidewall Horizontal Sidewall Recessed
–
2.8 Imp./4.0 S.I. 4.2 Imp./6.1 S.I. 5.6 Imp./8.1 S.I. GL8171

1/2” NPT/15mm BSPT 1/2” NPT/15mm BSPT 1/2” NPT/15mm BSPT

175 psi (1200 kPa) 175 psi (1200 kPa) 175 psi (1200 kPa)

Recessed Recessed Recessed

GL2870 GL4270 –

– – GL5670

SPRINKLER V28 AVAILABLE GUARDS V27 V34
HORIZONAL SIDEWALL V42 ■

SPRINKLER V56-2 Recessed V56 Open End AVAILABLE WRENCHES V34-2 Recessed V34 Open End 3/16 Hex-Bit
V2870 and V4270 ■ V27-2 Recessed V27 Open End ■ ■
V2709 ■ ■
■■ ■
V3409

Factory Hydrostatic Test: 100% @ 500 psi/3447 kPa/34 bar
Min. Operating Pressure: UL/FM: 7psi/48 kPa/.5 bar
Temperature Rating: See tables in section 2.0

1 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.

victaulic.com © 2021 Victaulic Company. All rights reserved.

41.52 16373 Rev A Updated 02/2021 1

victaulic.com
2.0 CERTIFICATION/LISTINGS

HORIZONTAL SIDEWALL APPROVALS/LISTINGS

SIN V2870 V4270 V2709 V3409
Nominal K Factor Imperial 8.0
2.8 4.2 5.6 11.5
Nominal K Factor S.I.2 4.0 6.1 8.1
Orientation Horizontal Sidewall Horizontal Sidewall Horizontal Sidewall Horizontal Sidewall
Escutcheon Flush | Extended Flush | Extended Flush | Extended Flush | Extended
135°F/57°C
cULus Approved Temperature Ratings F°/C° 155°F/68°C
4" – 12" Deflector Distance 175°F/79°C
135°F/57°C 135°F/57°C 135°F/57°C 200°F/93°C
FM 155°F/68°C 155°F/68°C 155°F/68°C 286°F/141°C
175°F/79°C 175°F/79°C 175°F/79°C 360°F/182°C
LPCB 200°F/93°C 200°F/93°C 200°F/93°C
286°F/141°C 286°F/141°C 286°F/141°C –
CE 360°F/182°C
CCC 500°F/260°C –
ZSTBS-15
135°F/57°C –
155°F/68°C
175°F/79°C –
– – 200°F/93°C

286°F/141°C
360°F/182°C

135°F/57°C
155°F/68°C
175°F/79°C
– – 200°F/93°C

286°F/141°C
360°F/182°C

135°F/57°C
155°F/68°C
175°F/79°C
– – 200°F/93°C

286°F/141°C
360°F/182°C

– – 155°F/68°C

Recessed Horizontal Sidewall Approvals/Listings

SIN V2870 V4270 V2709 V3409
Nominal K Factor Imperial 8.0
2.8 4.2 5.6 11.5
Nominal K Factor S.I.2 4.0 6.1 8.1
Orientation Horizontal Sidewall Horizontal Sidewall Horizontal Sidewall Horizontal Sidewall
Escutcheon RECESSED RECESSED RECESSED RECESSED

cULus Approved Temperature Ratings F°/C° 135°F/57°C
4" – 12" Deflector Distance 155°F/68°C
135°F/57°C 135°F/57°C 135°F/57°C 175°F/79°C
1/2" and 3/4" Escutcheon 155°F/68°C 155°F/68°C 155°F/68°C 200°F/93°C
175°F/79°C 175°F/79°C 175°F/79°C
FM 200°F/93°C 200°F/93°C 200°F/93°C –
1/2" Escutcheon Only 286°F/141°C 286°F/141°C
–
CCC 135°F/57°C
ZSTBS-15 155°F/68°C
– – 175°F/79°C

200°F/93°C

– – 155°F/68°C

2 For K-Factor when pressure is measured in Bar, multiply S.I. units by 10.

NOTES
• Listings and approval as of printing.
• Where cULus Listed, Polyester and VC-250 Coatings Listed as Corrosion Resistant
• Where FM Approved, VC-250 Coating Approved as Corrosion Resistant
• New York City Acceptance - All UL Listed and/or FM Approved sprinklers acceptable to NYC per section 28-113 of the Administrative Code and the OTCR Rule

41.52 16373 Rev A Updated 02/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 2

victaulic.com 2 ⁄ "/ ⁄ "/
64 mm 11 mm
3.0  SPECIFICATIONS – MATERIAL
De ector 1¼"/
Deflector: Bronze 31 mm
Bulb Nominal Diameter: 5.0mm
Load Screw: Bronze Load screw Bulb Frame
Pip Cap: Bronze Pip cap and Lodgement spring
Spring Seal: PTFE coated Beryllium nickel alloy spring seal
Frame: Brass
Lodgement Spring: Stainless steel V2870, V4270
Installation Wrench: Ductile iron
Sprinkler Frame Finishes: 3"/76 mm
• Plain brass
• Chrome plated ⁄ "/11 mm
• White polyester painted3, 4 Nominal make-in
• Flat black polyester painted3, 4
• Custom polyester painted3, 4 1¼"/
• VC-2505 32 mm

3 Not available on the Intermediate Level Style Pendent. De ector Frame
4 UL Listed for corrosion resistance. Load screw Lodgement spring
5 UL Listed and FM Approved for corrosion resistance. Bulb Pip cap and
spring seal
NOTE
• For cabinets and other accessories refer to separate sheet. V2709

2 ⁄ "/75 mm ½"/13 mm
Nominal make-in

1 ⁄ "/
33 mm

De ector Frame
Load screw Bulb Lodgement spring
Pip cap and
spring seal

V3409

41.52 16373 Rev A Updated 02/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 3

victaulic.com
4.0 DIMENSIONS

1¾"/44 mm Max. 2 ⁄ "/56 mm Max.
1¼"/32 mm Min. (½" Adj.) 1 ⁄ "/43 mm Min. (½" Adj.)
1"/25 mm Min. (¾" Adj.) 1 ⁄ "/37 mm Min. (¾" Adj.)

12"/305 mm Escutcheon Finished ceiling 12"/305 mm Escutcheon Finished ceiling
4"/102 mm Collar Reducer 4"/102 mm Collar Reducer
per NFPA per NFPA
2 ⁄ "/60 mm 2 ⁄ "/60 mm
2 ⁄ "/ 2"/51 mm 2 ⁄ "/ 2"/51 mm
75 mm Hole in wall 75 mm Hole in wall

Finished surface ⁄ "/22 mm Max. (¾" Adj.) Finished surface ⁄ "/22 mm Max. (¾" Adj.)
Typical wall ⁄ "/16 mm Max. (½" Adj.) Typical wall ⁄ "/16 mm Max. (½" Adj.)

⁄ "/3 mm Min. V2709 ⁄ "/3 mm Min.

V2870, V2790
2 ⁄ "/60 mm
1 ⁄ "/41 mm

12"/305 mm Escutcheon Finished ceiling
4"/102 mm Reducer
per NFPA
2 ⁄ "/60 mm
Collar 2"/51 mm
Hole in wall
2 ⁄ "/
75 mm

Finished surface ⁄ "/21 mm
Typical wall ⁄ "/2 mm

V3409

41.52 16373 Rev A Updated 02/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 4

Victaulic® FireLock™ Series FL-QR 41.01
Standard Coverage, Quick Response
Upright, Pendent and Recessed Pendent Sprinklers
K2.8 (4.0), K4.2 (6.1), K5.6 (8.1), K8.0 (11.5)

1.0  PRODUCT DESCRIPTION

QUICK RESPONSE UPRIGHT SPRINKLERS

SIN V2815 V4215 V2704 V3402
ORIENTATION UPRIGHT
UPRIGHT UPRIGHT UPRIGHT 8.0 Imp./11.5 S.I.
K-FACTOR1 3/4" NPT/20mm BSPT/IGS
CONNECTION 2.8 Imp./4.0 S.I. 4.2 Imp./6.1 S.I. 5.6 Imp./8.1 S.I.
175 psi/1200 kPa
MAX. WORKING PRESSURE 1/2" NPT/15mm BSPT 1/2" NPT/15mm BSPT 1/2" NPT/15mm BSPT/IGS
–
GLOBE RE-DESIGNATION 175 psi/1200 kPa 175 psi/1200 kPa 175 psi/1200 kPa GL8118
GLOBE EQUIVALENT cULus 250 psi /1725 kPa

GL2815 GL4215 –

– – GL5615

QUICK RESPONSE PENDENT SPRINKLERS

SIN V2801 V4201 V2708 V3406
ORIENTATION PENDENT
PENDENT PENDENT PENDENT 8.0 Imp./11.5 S.I.
K-FACTOR1 3/4" NPT/20mm BSPT/IGS
CONNECTION 2.8 Imp./4.0 S.I. 4.2 Imp./6.1 S.I. 5.6 Imp./8.1 S.I.
175 psi/1200 kPa
MAX. WORKING PRESSURE 1/2" NPT/15mm BSPT 1/2" NPT/15mm BSPT 1/2" NPT/15mm BSPT/IGS
–
GLOBE RE-DESIGNATION 175 psi /1200 kPa 175 psi /1200 kPa 175 psi /1200 kPa GL8101
GLOBE EQUIVALENT cULus 250 psi/1725 kPa

GL2801 GL4201 –

– – GL5601

QUICK RESPONSE RECESSED PENDENT SPRINKLERS

SIN V2801 V4201 V2708 V3406
ORIENTATION PENDENT
PENDENT PENDENT PENDENT 8.0 Imp./11.5 S.I.
K-FACTOR1 3/4" NPT/20mm BSPT/IGS
CONNECTION 2.8 Imp./4.0 S.I. 4.2 Imp./6.1 S.I. 5.6 Imp./8.1 S.I.
175 psi/1200 kPa
MAX. WORKING PRESSURE 1/2" NPT/15mm BSPT 1/2" NPT/15mm BSPT 1/2" NPT/15mm BSPT/IGS
Recessed
ESCUTCHEON 175 psi/1200 kPa 175 psi/1200 kPa 175 psi/1200 kPa –
GLOBE RE-DESIGNATION cULus 250 psi/1725 kPa
GL8101
GLOBE EQUIVALENT Recessed Recessed Recessed

GL2801 GL4201 –

– – GL5601

SPRINKLER AVAILABLE GUARDS/SHIELDS V34
Upright V28 V42 V27 ■
Pendent ■
■

■

SPRINKLER V56-2 Recessed V56 Open End AVAILABLE WRENCHES V34-2 Recessed V34 Open End 3/16 Hex-Bit
■ V27-2 Recessed V27 Open End ■ ■
V2815 and V4215 ■ ■
■ ■ ■
V2707 and V2704
■■ ■
V3402 ■

V2801, and V4201 ■

V2706 and V2708

V3406

Factory Hydrostatic Test: 100% @ 500 psi/3447 kPa/34 bar

Min. Operating Pressure: U L/FM: 7 psi/48 kPa/.5 bar
VdS: 5 psi/35 kPa/.35 bar (Upright only)

Temperature Rating: See tables in section 2.0

1 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.

victaulic.com © 2021 Victaulic Company. All rights reserved.

41.01 16343 Rev C Updated 04/2021 1

victaulic.com
2.0 CERTIFICATION/LISTINGS

UPRIGHT APPROVALS/LISTINGS

SIN V2815 V4215 V2704 V3402
8.0
Nominal K Factor Imperial 2.8 4.2 5.6 11.5
Nominal K Factor S.I.2 4.0 6.1 8.1
Orientation UPRIGHT UPRIGHT UPRIGHT UPRIGHT

Approved Temperature Ratings F°/C° 135°F/57°C
155°F/68°C
cULus 135°F/57°C 135°F/57°C 135°F/57°C 175°F/79°C
155°F/68°C 155°F/68°C 155°F/68°C 200°F/93°C
175°F/79°C 175°F/79°C 175°F/79°C 286°F/141°C
200°F/93°C 200°F/93°C 200°F/93°C 135°F/57°C
286°F/141°C 286°F/141°C 286°F/141°C 155°F/68°C
175°F/79°C
FM – 135°F/57°C 200°F/93°C
155°F/68°C 286°F/141°C
– 175°F/79°C 135°F/57°C
200°F/93°C 155°F/68°C
286°F/141°C 175°F/79°C
200°F/93°C
LPCB – 135°F/57°C 286°F/141°C
155°F/68°C 135°F/57°C
– 175°F/79°C 155°F/68°C
200°F/93°C 175°F/79°C
286°F/141°C 200°F/93°C
286°F/141°C
CE – 135°F/57°C 135°F/57°C
155°F/68°C 155°F/68°C
– 175°F/79°C 175°F/79°C
200°F/93°C 200°F/93°C
286°F/141°C 286°F/141°C

VdS – 135°F/57°C 155°F/68°C
155°F/68°C 286°F/141°C
– 175°F/79°C
200°F/93°C
286°F/141°C

CCC – 155°F/68°C
K-ZSTZ – 175°F/79°C

286°F/141°C

2 For K-Factor when pressure is measured in Bar, multiply S.I. units by 10.

PENDENT APPROVALS/LISTINGS

SIN V2801 V4201 V2708 V3406
Nominal K Factor Imperial 2.8 8.0
4.0 4.2 5.6 11.5
Nominal K Factor S.I.2 6.1 8.1
Orientation PENDENT PENDENT PENDENT PENDENT
Escutcheon Flush/Extended Flush/Extended Flush/Extended Flush/Extended

cULus 135°F/57°C Approved Temperature Ratings F°/C° 135°F/57°C
155°F/68°C 155°F/68°C
FM 175°F/79°C 135°F/57°C 135°F/57°C 175°F/79°C
200°F/93°C 155°F/68°C 155°F/68°C 200°F/93°C
CCC 286°F/141°C 175°F/79°C 175°F/79°C 286°F/141°C
K-ZSTX 200°F/93°C 200°F/93°C 135°F/57°C
– 286°F/141°C 286°F/141°C 155°F/68°C
175°F/79°C
– 135°F/57°C 200°F/93°C
155°F/68°C 286°F/141°C
– 175°F/79°C
200°F/93°C 155°F/68°C
286°F/141°C 286°F/141°C

155°F/68°C
– 200°F/93°C

286°F/141°C

2 For K-Factor when pressure is measured in Bar, multiply S.I. units by 10.

NOTES
• Listings and approval as of printing.
• Where cULus Listed, Polyester and VC-250 Coatings Listed as Corrosion Resistant (V3402 with VC-250 Only)
• Where FM Approved, VC-250 Coating Approved as Corrosion Resistant
• New York City Acceptance - All UL Listed and/or FM Approved sprinklers acceptable to NYC per section 28-113 of the Administrative Code and the OTCR Rule.

41.01 16343 Rev C Updated 04/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 2

victaulic.com
2.0  CERTIFICATION/LISTINGS (CONTINUED)

RECESSED PENDENT APPROVALS/LISTINGS

SIN V2801 V4201 V2708 V3406
Nominal K Factor Imperial 8.0
2.8 4.2 5.6 11.5
Nominal K Factor S.I.2
Orientation 4.0 6.1 8.1 PENDENT
Escutcheon Recessed
PENDENT PENDENT PENDENT
cULus 135°F/57°C
Recessed Recessed Recessed 155°F/68°C
FM 175°F/79°C
WITH 1/2" ADJUSTMENT Approved Temperature Ratings F°/C° 200°F/93°C
286°F/141°C
ESCUTCHEON ONLY 135°F/57°C 135°F/57°C 135°F/57°C 135°F/57°C
CCC 155°F/68°C 155°F/68°C 155°F/68°C 155°F/68°C
175°F/79°C 175°F/79°C 175°F/79°C 175°F/79°C
K-ZSTX 200°F/93°C 200°F/93°C 200°F/93°C 200°F/93°C
286°F/141°C 286°F/141°C
155°F/68°C
135°F/57°C 286°F/141°C
155°F/68°C
– – 175°F/79°C

200°F/93°C

155°F/68°C
– – 200°F/93°C

286°F/141°C

2 For K-Factor when pressure is measured in Bar, multiply S.I. units by 10.

NOTES
• Listings and approval as of printing.
• Where cULus Listed, Polyester and VC-250 Coatings Listed as Corrosion Resistant (V3402 with VC-250 Only)
• Where FM Approved, VC-250 Coating Approved as Corrosion Resistant
• New York City Acceptance - All UL Listed and/or FM Approved sprinklers acceptable to NYC per section 28-113 of the Administrative Code and the OTCR Rule.

41.01 16343 Rev C Updated 04/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 3

victaulic.com Frame ½"/13 mm
Lodgement spring Nominal make-in
3.0  SPECIFICATIONS – MATERIAL
Deflector: Bronze Pip cap and 2½"/
Bulb Nominal Diameter: 3.0mm spring seal 63 mm
Load Screw: Bronze
Pip Cap: Bronze Bulb 1 ⁄ "/
Spring Seal: PTFE coated Beryllium nickel alloy Load screw 33 mm
Frame: Brass 1 ⁄ "/
Lodgement Spring: Stainless steel De ector 37 mm
Installation Wrench: Ductile iron
Sprinkler Frame Finishes: De ector 2½"/
• Plain brass Load screw 63 mm
• Chrome plated
• White polyester painted3, 4 Bulb
• Flat black polyester painted3, 4 Pip cap and
• Custom polyester painted3, 4 spring seal
• VC-2505 Lodgement spring

3 Not available on the Intermediate Level Style Pendent. Frame
4 UL Listed for corrosion resistance.
5 UL Listed and FM Approved for corrosion resistance. De ector ½"/13 mm
Load screw Nominal make-in
NOTE 1 ⁄ "/
• For cabinets and other accessories refer to separate sheet. Bulb 40 mm
Pip cap and
⁄ "/11 mm spring seal 2¼"/
Nominal make-in Lodgement spring 57 mm

Lodgement spring 2 ⁄ "/ Frame ⁄ "/11 mm
Pip cap and 58 mm Nominal make-in
spring seal 1¼"/ De ector 1 ⁄ "/
Bulb 31 mm Load screw 37 mm
Load screw
Frame Bulb 2½"/
Pip cap and 63 mm
De ector spring seal
Lodgement spring
De ector 1 ⁄ "/
37 mm Frame
Load screw
Bulb 2½"/
63 mm
Pip cap and
spring seal
Lodgement spring

Frame

½"/13 mm ½"/13 mm
Nominal make-in Nominal make-in

41.01 16343 Rev C Updated 04/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 4

victaulic.com
4.0 DIMENSIONS

2 ⁄ "/60 mm
2"/51 mm
Hole in ceiling

⁄ "/22 mm Max. (¾" Adj.)
⁄ "/16 mm Max. (½" Adj.)

⁄ "/3 mm Min.

1 ⁄ "/29 mm Min. (¾" Adj.) 2 ⁄ "/75 mm Typical ceiling
1 ⁄ "/34 mm Min. (½" Adj.) 2 ⁄ "/60 mm Finished surface
2"/51 mm
1 ⁄ "/47 mm Max. Hole in ceiling Typical ceiling
⁄ "/22 mm Max. (¾" Adj.) Finished surface
⁄ "/16 mm Max. (½" Adj.)
Typical ceiling
⁄ "/3 mm Min. Finished surface

1 ⁄ "/47 mm Max 2 ⁄ "/75 mm
1 ⁄ "/29 mm Min. (¾" Adj.) 2 ⁄ "/60 mm
1 ⁄ "/34 mm Min. (½" Adj.). 2"/51 mm
Hole in ceiling
1"/25 mm Max. (¾" Adj.)
¾"/19 mm Max. (½" Adj.) 2 ⁄ "/75 mm

¼"/6 mm Min.
1 ⁄ "/30 mm Min. (½" Adj.)

⁄ "/24 mm Min. (¾" Adj.)
1 ⁄ "/43 mm Max.

41.01 16343 Rev C Updated 04/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 5

Victaulic® FireLock Model FL-QR/C 41.03
Standard Coverage, Quick Response
Concealed Pendent Sprinklers, K5.6 (8.1)

1.0  PRODUCT DESCRIPTION

QUICK RESPONSE CONCEALED PENDENT SPRINKLERS

SIN V5606 V3802 V3808
Concealed Pendent
ORIENTATION Concealed Pendent Concealed Pendent
K-FACTOR1 5.6 Imp./8.1 S.I. 5.6 Imp./8.1 S.I. 5.6 Imp./8.1 S.I.
1/2” NPT/15mm BSPT
CONNECTION 1/2” NPT/15mm BSPT 1/2” NPT/15mm BSPT 300psi (2068 kPa)
MAX. WORKING PRESSURE 175 psi (1200 kPa) 175 psi (1200 kPa)
Concealed
ESCUTCHEON Concealed Concealed
GLOBE RE-DESIGNATED GL5606 GL5605
GL5604
GLOBE EQUIVALENT V38 Concealed
■
AVAILABLE WRENCHES
V38 Concealed
SPRINKLER 1" ADJ Concealed V38 Concealed ■
PENDENT
■■

CLEAN ROOM GASKET

SPRINKLER 1" ADJ Concealed V38 Concealed
PENDENT
■

Factory Hydrostatic Test: 100% @ 500 psi/3447 kPa/34 bar
Min. Operating Pressure: UL/FM: 7psi/48 kPa/.5 bar
Temperature Rating: See tables in section 2.0

1 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.

victaulic.com © 2021 Victaulic Company. All rights reserved.

41.03 16369 Rev B Updated 04/2021 1

victaulic.com
2.0 CERTIFICATION/LISTINGS

APPROVALS/LISTINGS

SIN V5606 Cover Plate V3802 V3808 Cover Plate
Nominal K Factor Imperial 5.6 –
8.1 – 5.6 5.6 –
Nominal K Factor S.I.2 – 8.1 8.1 –
Orientation Pendent – Pendent Pendent –
Escutcheon Concealed – Concealed Concealed
135°F/57°C
cULus 135°F/57°C APPROVED TEMPERATURE RATINGS F°/C° 135°F/57°C
155°F/68°C 165°F/74°C
FM 175°F/79°C 135°F/57°C 135°F/57°C 135°F/57°C 165°F/74°C
Standard Response Only 200°F/93°C 135°F /57°C | 155°F/68°C 155°F/68°C 155°F/68°C
175°F/79°C 175°F/79°C 135°F/57°C
LPCB – 155°F/68°C 200°F/93°C 200°F/93°C 135°F/57°C | 165°F/74°C
155°F/68°C
CE – 165°F/74°C
CCC 155°F/68°C
K ZSTDY – – 175°F/79°C – 138°F/59°C
165°F/74°C
– 200°F/93°C 165°F/74°C

155°F/68°C 138°F/59°C
– 175°F/79°C – 165°F/74°C
165°F/74°C
200°F/93°C
135°F/57°C
155°F/68°C 135°F/57°C | 165°F/74°C
– 175°F/79°C –

200°F/93°C

– 155°F/68°C –
200°F/93°C

APPROVALS/LISTINGS WITH CLEAN ROOM GASKET

SIN V38023 V38083 Cover Plate
Nominal K Factor Imperial –
5.6 5.6 –
Nominal K Factor S.I.2 8.1 8.1 –
Orientation Pendent Pendent –
Escutcheon Concealed Concealed
135°F/57°C
cULus APPROVED TEMPERATURE RATINGS F°/C° 135°F/57°C
165°F/74°C
135°F/57°C 135°F/57°C 165°F/74°C
155°F/68°C 155°F/68°C
175°F/79°C 175°F/79°C
200°F/93°C 200°F/93°C

2 For K-Factor when pressure is measured in Bar, multiply S.I. units by 10.
3 Recognized as standard response when clean room gasket is installed.

NOTES
• Listings and approval as of printing.
• New York City Acceptance - All UL Listed and/or FM Approved sprinklers acceptable to NYC per section 28-113 of the Administrative Code and the OTCR Rule.

41.03 16369 Rev B Updated 04/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 2

victaulic.com

3.0  SPECIFICATIONS – MATERIAL
Deflector: Bronze
Bulb Nominal Diamter: 3.0 mm
Load Screw: Brass
Pip Cap: Brass
Spring Seal: PTFE coated Beryllium nickel alloy
Frame: Brass
Concealed Cup: Steel
Cover Plate: Steel
Lodgement Spring: Stainless Steel
Pin: Stainless Steel
Installation Wrench: Ductile Iron
Sealing Gasket: White nitrile (CLEAN ROOM USE ONLY)
Cover Plate Finishes:
• Chrome plated
• White painted
• Flat black painted
• Custom painted

NOTE
• For cabinets and other accessories refer to separate sheet.

4.0 DIMENSIONS

2 ⁄ "/68 mm
2 ⁄ "/60 mm
Hole in ceiling

Cup Typical ceiling 2 ⁄ "/61 mm ⁄ "/2 mm Min.
1 ⁄ "/48 mm ⁄ "/14 mm Max.
Lodgement Spring V3802, V3808
Pip cap and
spring seal
Bulb
Frame
Pin
Load Screw

Cover plate 3¼"/82 mm Finished surface
De ector V3802, V3808

41.03 16369 Rev B Updated 04/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 3

victaulic.com
4.0  DIMENSIONS (CONTINUED)

2 ⁄ "/60 mm
2"/51 mm
Hole in ceiling

1 ⁄ "/
48 mm

Cup 2¾"/69 mm
Pip cap and 1 ⁄ "/47 mm
spring seal
Lodgement spring Typical ceiling

Bulb 2¾"/70 mm Finished surface ⁄ "/
Frame V5606 4 mm
Load screw

Pin
De ector

Cover plate

2¼"/57 mm
2"/51 mm
Hole in ceiling

1 ⁄ "/
48 mm

2¾"/69 mm
1 ⁄ "/47 mm

1¼"/32 mm Finished surface ⁄ "/
¼"/6 mm 5 mm
3 ⁄ "/87 mm
Activated Position
V5606 Clean Room Coverplate
V5606

41.03 16369 Rev B Updated 04/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 4

victaulic.com 2 ⁄ "/73 mm
4.0  DIMENSIONS (CONTINUED) 2"/51 mm
Hole in ceiling
4"/102 mm
3 ⁄ "/98 mm 1 ⁄ "/
Hole in ceiling 48 mm

1 ⁄ "/
48 mm

2¾"/69 mm 2¾"/69 mm
1 ⁄ "/47 mm 1 ⁄ "/47 mm

4½"/114mm ⁄ "/ 3 ⁄ "/84mm ⁄ "/
4 mm 4 mm
Seismic Coverplate Large Coverplate
V5606 V5606

41.03 16369 Rev B Updated 04/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 5

Victaulic® FireLock™ Series FL-QR/SW 41.02
Standard Coverage, Quick Response
Horizontal Sidewall and Recessed Horizontal Sidewall
Sprinklers K2.8 (4.0), K4.2 (6.1), K5.6 (8.1), K8.0 (11.5)

1.0  PRODUCT DESCRIPTION

QUICK RESPONSE HORIZONTAL SIDEWALL

SIN V2826 V4226 V2710 V3410
ORIENTATION Horizontal Sidewall
Horizontal Sidewall Horizontal Sidewall Horizontal Sidewall
K-FACTOR1 8.0 Imp./11.5 S.I.
CONNECTION 2.8 Imp./4.0 S.I. 4.2 Imp./6.1 S.I. 5.6 Imp./8.1 S.I. 3/4" NPT/ 20mm BSPT/IGS
MAX. WORKING PRESSURE
GLOBE RE-DESIGNATION 1/2" NPT/15mm BSPT 1/2" NPT/15mm BSPT 1/2" NPT/15mm BSPT/IGS 175 psi/1200 kPa
GLOBE EQUIVALENT
175 psi/1200 kPa 175 psi/1200 kPa 175 psi/1200 kPa GL8127

GL2826 GL4226

GL5626

QUICK RESPONSE RECESSED HORIZONTAL SIDEWALL

SIN V2826 V4226 V2710 V3410
ORIENTATION Horizontal Sidewall Horizontal Sidewall
Horizontal Sidewall Horizontal Sidewall
K-FACTOR1 2.8 Imp./4.0 S.I. 4.2 Imp./6.1 S.I. 5.6 Imp./8.1 S.I. 8.0 Imp./11.5 S.I.
CONNECTION 1/2" NPT/15mm BSPT 3/4" NPT/ 20mm BSPT
MAX. WORKING PRESSURE 1/2" NPT/15mm BSPT 1/2" NPT/15mm BSPT
ESCUTCHEON 175 psi/1200 kPa 175 psi/1200 kPa 175 psi/1200 kPa 175 psi/1200 kPa
GLOBE RE-DESIGNATION Recessed Recessed Recessed Recessed
GLOBE EQUIVALENT GL2826 GL4226
GL5626 GL8127
SPRINKLER
Horizontal Sidewall AVAILABLE GUARDS V34

V28 V42 V27

Sprinkler V56-2 Recessed V56 Open End AVAILABLE WRENCHES V34-2 Recessed V34 Open End 3/16 Hex-Bit
V27-2 Recessed V27 Open End

V2826 and V4226

V2710

V3410

Factory Hydrostatic Test: 100% @ 500 psi/3447 kPa/34 bar
Min. Operating Pressure: UL/FM: 7psi/48 kPa/.5 bar
Temperature Rating: See tables in section 2.

1 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.

victaulic.com © 2021 Victaulic Company. All rights reserved.

41.02 16368 Rev A Updated 07/2021 1

victaulic.com
2.0 CERTIFICATION/LISTINGS

HORIZONTAL SIDEWALL APPROVALS/LISTINGS

SIN V2826 V4226 V2710 V3410
Nominal K Factor Imperial 8
2.8 4.2 5.6
Nominal K Factor S.I.2 4.0 6.1 8.1 11.5
Orientation Horizontal Sidewall Horizontal Sidewall Horizontal Sidewall Horizontal Sidewall
Escutcheon Flush | Extended Flush | Extended Flush | Extended
Flush | Extended
cULus Approved Temperature Ratings F°/C° 135°F/57°C
4" – 12" Deflector Distance 155°F/68°C
135°F/57°C 135°F/57°C 135°F/57°C 175°F/79°C
FM 155°F/68°C 155°F/68°C 155°F/68°C 200°F/93°C
175°F/79°C 175°F/79°C 175°F/79°C 286°F/141°C
LPCB 200°F/93°C 200°F/93°C 200°F/93°C
286°F/141°C 286°F/141°C 286°F/141°C –
CE
135°F/57°C –
155°F/68°C
– – 175°F/79°C –
200°F/93°C
286°F/141°C V3410
8
135°F/57°C
155°F/68°C 11.5
– – 175°F/79°C Horizontal Sidewall
200°F/93°C
286°F/141°C RECESSED

135°F/57°C 135°F/57°C
155°F/68°C 155°F/68°C
– – 175°F/79°C 175°F/79°C
200°F/93°C 200°F/93°C
286°F/141°C
–
RECESSED HORIZONTAL SIDEWALL APPROVALS/LISTINGS

SIN V2826 V4226 V2710
Nominal K Factor Imperial 2.8
4.0 4.2 5.6
Nominal K Factor S.I.2 6.1 8.1
Orientation Horizontal Sidewall Horizontal Sidewall Horizontal Sidewall
Escutcheon RECESSED RECESSED RECESSED

cULus 135°F/57°C Approved Temperature Ratings F°/C°
4" – 12" Deflector Distance 155°F/68°C
175°F/79°C 135°F/57°C 135°F/57°C
1/2" and 3/4" Adjustment 200°F/93°C 155°F/68°C 155°F/68°C
Escutcheon " 286°F/141°C 175°F/79°C 175°F/79°C
200°F/93°C 200°F/93°C
286°F/141°C

FM 135°F/57°C
1/2" Adjustment Escutcheon 155°F/68°C
– – 175°F/79°C
Only
200°F/93°C

2 For K-Factor when pressure is measured in Bar, multiply S.I. units by 10.

NOTES
• Listings and approval as of printing.

• Where cULus Listed, Polyester and VC-250 Coatings Listed as Corrosion Resistant

• Where FM Approved, VC-250 Coating Approved as Corrosion Resistant

• New York City Acceptance - All UL Listed and/or FM Approved sprinklers acceptable to NYC per section 28-113 of the Administrative Code and the OTCR Rule

41.02 16368 Rev A Updated 07/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 2

victaulic.com 2 ⁄ "/64 mm

3.0  SPECIFICATIONS – MATERIAL De ector ⁄ "/11 mm
Nominal make-in
Deflector: Bronze
Bulb Nominal Diameter: 3.0mm 1¼"/
Load Screw: Bronze 31 mm
Pip Cap: Bronze
Spring Seal: PTFE coated Beryllium nickel alloy Load screw Bulb Frame
Frame: Brass Pip cap and Lodgement spring
Lodgement Spring: Stainless steel spring seal
Installation Wrench: Ductile iron
Sprinkler Frame Finishes: V2826, V4226
• Plain brass
• Chrome plated 3"/ ⁄ "/11 mm
• White polyester painted3, 4 76 mm Nominal
• Flat black polyester painted3, 4 make-in
• Custom polyester painted3, 4 1¼"/
• VC-2505 32 mm

3 Not available on the Intermediate Level Style Pendent. De ector Frame
4 UL Listed for corrosion resistance. Load screw Lodgement spring
5 UL Listed and FM Approved for corrosion resistance. Bulb
Pip cap and
NOTE spring seal
• For cabinets and other accessories refer to separate sheet.
V2710

2 ⁄ "/ ½"/13 mm
75 mm Nominal make-in

1 ⁄ "/
33 mm

De ector Frame

Load screw Lodgement spring
Bulb Pip cap and
spring seal

V3410

4.0 DIMENSIONS ⁄ "/22 mm Max. (¾" Adj.)
⁄ "/16 mm Max. (½" Adj.)
1¾"/44 mm Max.
1¼"/32 mm Min. (½" Adj.) ⁄ "/3 mm Min.
1"/25 mm Min. (¾" Adj.)

12"/305 mm Finished ceiling
4"/102 mm Reducer
per NFPA
2 ⁄ "/60 mm
Collar 2"/51 mm
Hole in wall
2 ⁄ "/
75 mm

Escutcheon

Finished surface Typical wall

V2826, V4226

41.02 16368 Rev A Updated 07/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 3

victaulic.com
4.0  DIMENSIONS (CONTINUED)

2 ⁄ "/56 mm Max.
1 ⁄ "/43 mm Min. (½" Adj.)
1 ⁄ "/37 mm Min. (¾" Adj.)

12"/305 mm Escutcheon Finished ceiling
4"/102 mm Collar Reducer
per NFPA
2 ⁄ "/60 mm
2 ⁄ "/ 2"/51 mm
75 mm Hole in wall

Finished surface ⁄ "/22 mm Max. (¾" Adj.)
Typical wall ⁄ "/16 mm Max. (½" Adj.)

V2710 ⁄ "/3 mm Min.
2 ⁄ "/60 mm
1 ⁄ "/41 mm

12"/305 mm Escutcheon Finished ceiling
4"/102 mm Reducer
per NFPA
2 ⁄ "/60 mm
2 ⁄ "/ 2"/51 mm
75 mm Hole in wall

Collar

Finished surface ⁄ "/21 mm
Typical wall ⁄ "/2 mm

V3410

41.02 16368 Rev A Updated 07/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 4

Victaulic® FireLock™ Series FL-ECOH 42.51
Extended Coverage, Standard and Quick Response
Upright, Pendent and Recessed Pendent Sprinklers
K11.2 (16.2), K14.0 (20.2)

1.0  PRODUCT DESCRIPTION

SIN EXTENDED COVERAGE UPRIGHT SPRINKLERS V3425
ORIENTATION
V1121 UPRIGHT
K-FACTOR1 14.0 Imp./20.2 S.I.1
CONNECTION UPRIGHT 3/4" NPT/ 20mm BSPT/IGS Grooved
MAX. WORKING PRESSURE 11.2 Imp./16.1 S.I. 175 psi (1200 kPa)
GLOBE RE-DESIGNATION 3/4" NPT/ 20mm BSPT
175 psi (1200 kPa) –

GL1121

SIN EXTENDED COVERAGE PENDENT SPRINKLERS V3421
ORIENTATION
V1113 PENDENT
K-FACTOR1 PENDENT 14.0 Imp./20.2 S.I.
CONNECTION 11.2 Imp./16.1 S.I. 3/4" NPT/ 20mm BSPT/IGS Grooved
MAX. WORKING PRESSURE 3/4" NPT/ 20mm BSPT 175 psi (1200 kPa)
GLOBE RE-DESIGNATION 175 psi (1200 kPa)
GL1113 –

SIN EXTENDED COVERAGE RECESSED PENDENT SPRINKLERS V3421
ORIENTATION
V1113 RECESSED PENDENT
K-FACTOR1 14.0 Imp./20.2 S.I.
CONNECTION RECESSED PENDENT
MAX. WORKING PRESSURE 11.2 Imp./16.1 S.I. 3/4" NPT/ 20mm BSPT
GLOBE RE-DESIGNATION 175 psi (1200 kPa)
3/4" NPT/ 20mm BSPT –
175 psi (1200 kPa)
GL1113

AVAILABLE WRENCHES

SPRINKLER V11 Recessed V11 Open End V34 Recessed V34 Open End ³⁄16 Hex-Bit (V9)
■ ■ ■ ■ ■
Upright ■ ■ ■ ■ ■
Pendent

Factory Hydrostatic Test: 100% @ 500 psi/3447 kPa/34 bar
Min. Operating Pressure: UL: 7psi/48 kPa/.5 bar
Temperature Rating: See tables in section 2.0

1 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.

victaulic.com © 2021 Victaulic Company. All rights reserved.

42.51 16381 Rev A Updated 02/2021 1