NORM TEKNİK GENEL KATALOG

victaulic.com
2.0 CERTIFICATION/LISTINGS

SIN V1121
11.2
Nominal K Factor Imperial 16.2

Nominal K Factor S.I.2 UPRIGHT

Installation Type OH2 Flow
GPM
Maximum OH1 Flow OH1 Pressure L/min OH2 Pressure Approved Minimum
Coverage Area GPM PSI 39 PSI Temperature Spacing
Width x Length L/min kPa 148 kPa
30 7.2 51 12.1 Ratings Ft.
Ft. x Ft Listing Response 114 50 196 83 m
mxm Agency QR 20.7 F°/C° 11
39 12.1 65 143 155°F/68°C 3.4
14 x 14 UL SR 148 83 246 200°F/93°C
4.3 x 4.3 33.7 155°F/68°C Minimum
80 232 175°F/79°C Spacing
16 x 16 UL 303 200°F/93°C
4.9 x 4.9 51 286°F/141°C Ft.
V3425 352 155°F/68°C m
18 x 18 UL SR 49 19.1 14.0 175°F/79°C
5.5 x 5.5 185 132 20.2 200°F/93°C 8
286°F/141°C 2.4
20 x 20 UL SR 60 28.7 UPRIGHT 155°F/68°C
6.1 x 6.1 227 198 175°F/79°C
OH2 Flow 200°F/93°C
GPM 286°F/141°C
L/min
SIN 51
193
Nominal K Factor Imperial
51
Nominal K Factor S.I.2 196

Installation Type 65
246
Maximum OH1 Flow OH1 Pressure OH2 Pressure Approved
Coverage Area GPM PSI 80 PSI Temperature
Width x Length L/min kPa 303 kPa
13.3 Ratings
Ft. x Ft Listing Response 39 7.8 92
mxm Agency SR 148 54 F°/C°
13.3 155°F/68°C
14 x 14 UL 92 175°F/79°C
4.3 x 4.3 200°F/93°C
21.6 286°F/141°C
16 x 16 UL SR 39 7.8 149 155°F/68°C
4.9 x 4.9 149 54 175°F/79°C
32.7 200°F/93°C
18 x 18 UL SR 49 12.3 226 286°F/141°C
5.5 x 5.5 186 85 155°F/68°C
175°F/79°C
20 x 20 UL SR 60 18.4 200°F/93°C
6.1 x 6.1 227 127 286°F/141°C
155°F/68°C
175°F/79°C
200°F/93°C
286°F/141°C

2 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

NOTES
• Listings and approval as of printing.

42.51 16381 Rev A Updated 02/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 2

victaulic.com
2.0  CERTIFICATION/LISTINGS (CONTINUED)

SIN V1113

Nominal K Factor Imperial 11.2
16.2
Nominal K Factor S.I.2 Pendent/Recessed Pendent

Installation Type

Maximum Adjustment OH1 Flow OH1 Pressure OH2 Flow Approved Minimum
Coverage Area In GPM PSI GPM Temperature Spacing
Width x Length mm L/min kPa L/min OH2 Pressure Ratings
30 PSI Ft.
Ft. x Ft Listing Response 1/2 and 3/4 114 7.2 39 kPa F°/C° m
mxm Agency QR 15 and 20 39 50 148 12.1 155°F/68°C
SR 1/2 and 3/4 148 83 200°F/93°C 9
14 x 14 UL 15 and 20 155°F/68°C 2.7
4.3 x 4.3 SR 49 20.7 175°F/79°C
1/2 and 3/4 185 143 200°F/93°C
16 x 16 UL SR 15 and 20 12.1 51 286°F/141°C
4.9 x 4.9 60 83 196
1/2 and 3/4 227 155°F/68°C
18 x 18 UL 15 and 20 19.1 65 33.7 175°F/79°C
5.5 x 5.5 132 246 232 200°F/93°C

20 x 20 UL 28.7 80 286°F/141°C
6.1 x 6.1 198 303
155°F/68°C
51 175°F/79°C
352 200°F/93°C

286°F/141°C

SIN V3421

Nominal K Factor Imperial 14.0
20.2
Nominal K Factor S.I.2 Pendent/Recessed Pendent

Installation Type

Maximum Adjustment OH1 Flow OH1 Pressure OH2 Flow Approved Minimum
Coverage Area In GPM PSI GPM Temperature Spacing
Width x Length mm L/min kPa L/min OH2 Pressure Ratings
39.0 PSI Ft.
Ft. x Ft Listing Response 1/2 and 3/4 148 kPa F°/C° m
mxm Agency SR 15 and 20 155°F/68°C
SR 39.0 13.3 175°F/79°C 12
14 X 14 UL SR 1/2 and 3/4 149 7.8 51.0 92 200°F/93°C 3.7
4.3 X 4.3 SR 15 and 20 54 193 286°F/141°C
49.0 155°F/68°C
16 X 16 UL 1/2 and 3/4 186 7.8 51 13.3 175°F/79°C
4.9 X 4.9 15 and 20 55 196 93 200°F/93°C
60 286°F/141°C
18 x 18 UL 1/2 and 3/4 227 12.3 65 155°F/68°C
5.5 x 5.5 15 and 20 85 246 21.6 175°F/79°C
149 200°F/93°C
20 x 20 UL 18.4 80.0 286°F/141°C
6.1 x 6.1 127 303 155°F/68°C
32.7 175°F/79°C
226 200°F/93°C
286°F/141°C

2 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

NOTES
• Listings and approval as of printing.

42.51 16381 Rev A Updated 02/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 3

victaulic.com De ector 1½"/
38 mm
3.0  SPECIFICATIONS – MATERIAL Load screw
Bulb 2 ⁄ "/
Deflector: Bronze 62 mm
Bulb Nominal Diameter: 3.0mm Pip cap and
Load Screw: Bronze spring seal
Pip Cap: Bronze
Spring Seal Assembly: PTFE coated Beryllium nickel Frame
alloy
Frame: Brass ½"/13 mm
Lodgement Spring: Stainless Steel Nominal make-in
Installation Wrench: Ductile iron
Sprinkler Frame Finishes: V1121
• Plain brass 1 ⁄ "/
• Chrome plated 49 mm
• White polyester painted3, 4
• Flat black polyester painted3, 4 De ector 2½"/
• Custom polyester painted3, 4 Load screw 63 mm
• VC-2505
Bulb V3425 ½"/13 mm
3 Not available on the Intermediate Level Style Pendent. Pip cap and Nominal make-in
4 UL Listed for corrosion resistance. spring seal
5 UL Listed and FM Approved for corrosion resistance. Lodgement spring ½"/13 mm
Nominal make-in
NOTE Frame
• For cabinets and other accessories refer to separate sheet.
Frame
Pip cap and 2 ⁄ "/
spring seal 62 mm

Bulb 1½"/
Load screw 38 mm
V1113
De ector
½"/13 mm
Frame Nominal make-in
Lodgement spring
2½"/
Pip cap and 63 mm
spring seal

Bulb
Load screw

De ector

1 ⁄ "/
36 mm
V3421

42.51 16381 Rev A Updated 02/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 4

victaulic.com
4.0 DIMENSIONS

2 ⁄ "/60 mm
2"/51 mm

⁄ "/3 mm Min. Typical ceiling
⁄ "/22 mm Max Finished surface
1 ⁄ "/29 mm Min.
1 ⁄ "/48 mm Max.

2 ⁄ "/
75 mm
V1113

2 ⁄ "/60 mm
2"/51 mm

⁄ "/22 mm Max. (¾" Adj.)
⁄ "/16 mm Max. (½" Adj.)

⁄ "/3 mm Min.

Typical ceiling

1 ⁄ "/47 mm Max. Finished surface
1 ⁄ "/34 mm Min. (½" Adj.)
1 ⁄ "/29 mm Min. (¾" Adj.)

2 ⁄ "/
75 mm
V3421

5.0 PERFORMANCE
Sprinkler is to be installed and designed as per NFPA, FM Datasheets, or any local standards.

42.51 16381 Rev A Updated 02/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 5

Victaulic® FireLock™ Series FL-ECLH/C 42.04
Extended Coverage, Quick Response
Concealed Pendent Sprinklers
K5.6 (8.1), K8.0 (11.5), K11.2 (16.2)

1.0  PRODUCT DESCRIPTION

QUICK RESPONSE EXTENDED COVERAGE CONCEALED PENDENT SPRINKLERS

SIN V5603 V3102 V1106

ORIENTATION Concealed Pendent Concealed Pendent Concealed Pendent
11.2 Imp. /16.2 S.I.
K-FACTOR1 5.6 Imp./8.1 S.I. 8.0 Imp./11.5 S.I. 3/4" NPT/ 20mm BSPT
175 psi (1200 kPa)
CONNECTION 1/2” NPT/15mm BSPT 3/4" NPT/ 20mm BSPT
GL1106
MAX. WORKING PRESSURE 175 psi (1200 kPa) 175 psi (1200 kPa) V3104

GLOBE RE-DESIGNATION GL5603 –

VICTAULIC EQUIVALENT – –

AVAILABLE WRENCHES

SPRINKLER V56 Concealed V33 Concealed V11 Concealed
PENDENT ■
■■

Factory Hydrostatic Test: 100% @ 500 psi/3447 kPa/34 bar
Min. Operating Pressure: UL/FM: 7psi/48 kPa/.5 bar
Temperature Rating: See tables in section 2.0

1 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.

victaulic.com © 2021 Victaulic Company. All rights reserved.

42.04 16380 Rev A Updated 02/2021 1

victaulic.com
2.0 CERTIFICATION/LISTINGS

SIN V5603

Nominal K Factor Imperial 5.6
8.1
Nominal K Factor S.I.2 Concealed Pendent

Installation Type

Maximum Flow Pressure Approved Approved Minimum
Coverage Area GPM PSI Temperature Coverplate Spacing
Width x Length L/min kPa Temperature
26 21.5 Ratings Ft
Ft. x Ft Listing Agency Response 98 148 135°F/57°C Ratings m
mxm QR 33 155°F/68°C 135°F/57°C 8
QR 125 34.7 175°F/79°C 135°F/57°C 2.4
16 X 16 cULus QR 40 239 135°F/57°C 155°F/68°C
4.9 X 4.9 151 51 155°F/68°C 135°F/57°C Minimum
Response 352 175°F/79°C 135°F/57°C Spacing
18 x 18 cULus QR Flow 155°F/68°C
5.5 x 5.5 cULus QR GPM 135°F/57°C 135°F/57°C Ft.
20 x 20 QR L/min m
6.1 x 6.1 26 Approved 8
Response 98 Coverplate 2.4
SIN QR 33 V3102 Temperature
125 Minimum
Nominal K Factor Imperial 40 8 Ratings Spacing
Nominal K Factor S.I.2 151 11.5
Installation Type Concealed Pendent 135°F/57°C Ft.
Flow 135°F/57°C m
Maximum Listing Agency GPM Pressure Approved 135°F/57°C
Coverage Area L/min PSI Temperature 9
Width x Length cULus 30 kPa Approved 2.7
cULus 113.6 Ratings Coverplate
Ft. x Ft cULus 10.6 Temperature
mxm 73 135°F/57°C
17 135°F/57°C Ratings
16 X 16 117 135°F/57°C 135°F/57°C
4.9 X 4.9 25 135°F/57°C
18 x 18 172 155°F/68°C
5.5 x 5.5 155°F/68°C
20 x 20 135°F/57°C
6.1 x 6.1 135°F/57°C
155°F/68°C
SIN V1106 155°F/68°C
135°F/57°C
Nominal K Factor Imperial 11.2 135°F/57°C
16.2 155°F/68°C
Nominal K Factor S.I.2 Concealed Pendent 155°F/68°C

Installation Type

Maximum Pressure Approved
Coverage Area PSI Temperature
Width x Length kPa
7.2 Ratings
Ft. x Ft Listing Agency 50 135°F/57°C
mxm 155°F/68°C
8.7 175°F/79°C
16 X 16 cULus 60 200°F/93°C
4.9 X 4.9 135°F/57°C
12.8 155°F/68°C
18 x 18 cULus QR 33 88 175°F/79°C
5.5 x 5.5 125 200°F/93°C
135°F/57°C
20 x 20 cULus QR 40 155°F/68°C
6.1 x 6.1 151 175°F/79°C
200°F/93°C

2 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.
NOTES
• Listings and approval as of printing.

42.04 16380 Rev A Updated 02/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 2

victaulic.com

3.0  SPECIFICATIONS – MATERIAL

Deflector: Bronze
Bulb Nominal Diamter: 3.0 mm
Load Screw: Brass
Pip Cap: Brass
Spring Seal: PTFE coated Beryllium nickel alloy
Frame: Brass
Lodgement Spring: Stainless Steel
Pin: Stainless Steel
Cup: Steel
Cover Plate: Steel
Installation Wrench: Ductile Iron
Cover Plate Finishes:
• Chrome plated
• White painted
• Flat black painted
• Custom painted

NOTE
• For cabinets and other accessories refer to separate sheet.

4.0 DIMENSIONS

2¾"/70 mm
2 ⁄ "/60 mm
Hole in ceiling

Cup 2¾"/70 mm
1 ⁄ "/48 mm
Frame Typical ceiling

Pip cap and
Spring Seal

Bulb
Lodgement Spring

Load Bar
Load Screw

Pin
De ector

Finished surface Cover plate Finished surface 1 ⁄ "/33 mm
3 ⁄ "/84 mm V5603 ⁄ "/10 mm

V5603

42.04 16380 Rev A Updated 02/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 3

victaulic.com
4.0 DIMENSIONS

2¾"/70 mm
2 ⁄ "/67 mm
Hole in ceiling

Cup 3 ⁄ "/79 mm 3 ⁄ "/85 mm
2¾"/70mm
Frame
Typical ceiling
Pip cap and
spring seal

Bulb
Load Screw

Pin
De ector

Finished surface Cover plate Finished surface ¾"/18 mm
3¼"/82 mm Max.

V3102 V3102

2¾"/70 mm
2 ⁄ "/67 mm
Hole in ceiling

Cup 2¾"/70 mm
1 ⁄ "/48 mm
Frame
Pip cap and
spring seal

Bulb
Lodgement Spring

Load Bar
Load Screw

Pin
De ector

Finished surface ⁄ "/4 mm Finished surface 1¼"/32 mm
⁄ "/11 mm
Cover plate
3 ⁄ "/84 mm V1106

V1106

5.0 PERFORMANCE
Sprinkler is to be installed and designed as per NFPA, FM Datasheets, or any local standards.

42.04 16380 Rev A Updated 02/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 4

Victaulic® FireLock™ Series FL-ECLH/SWDC 42.03
Extended Coverage, Quick Response
Domed Concealed and Horizontal Sidewall Sprinklers
K5.6 (8.1), K8.0 (11.5)

1.0  PRODUCT DESCRIPTION

QUICK RESPONSE DOMED CONCEALED HORIZONTAL SIDEWALL

SIN V5613 V8113 V8114
Domed Concealed
ORIENTATION Domed Concealed Domed Concealed Horizontal Sidewall
Horizontal Sidewall Horizontal Sidewall
K-FACTOR1 8.0 Imp./11.5 S.I.
CONNECTION 5.6 Imp./8.1 S.I. 8.0 Imp./11.5 S.I. 3/4" NPT/ 20mm BSPT
MAX. WORKING PRESSURE
GLOBE RE-DESIGNATION 1/2” NPT/15mm BSPT 3/4" NPT/ 20mm BSPT 175 psi (1200 kPa)
GL8114
175 psi (1200 kPa) 175 psi (1200 kPa)
V11-2 Recessed
GL5613 GL8113 ■

AVAILABLE WRENCHES

SPRINKLER V56-2 Recessed V11-2 Recessed
SIDEWALL
■■

Factory Hydrostatic Test: 100% @ 500 psi/3447 kPa/34 bar
Min. Operating Pressure: UL: 7psi/48 kPa/.5 bar
Temperature Rating: See tables in section 2.0

1 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

2.0 CERTIFICATION/LISTINGS

SIN V5613

Nominal K Factor Imperial 5.6
Nominal K Factor S.I.2 8.1

Installation Type Domed Concealed Horizontal Sidewall

Maximum Top of Deflector Flow Pressure Approved Approved Minimum
Coverage Area Ceiling GPM PSI Temperature Coverplate Spacing
Width x Length L/min kPa Temperature
Ratings Ft.
Ft. x Ft Listing Agency in Response 29 26.8 Ratings m
mxm mm QR 110 185 F°/C°
135°F/57°C F°/C° 8
16 x 18 cULus 4–6 QR 32 32.7 155°F/68°C 135°F/57°C 2.4
4.9 x 5.5 cULus 100 – 150 QR 121 225 175°F/79°C 135°F/57°C
QR 32 32.7 135°F/57°C 155°F/68°C
6 – 12 121 225 155°F/68°C 135°F/57°C
150 – 300 32 32.7 175°F/79°C 135°F/57°C
121 225 135°F/57°C 155°F/68°C
16 x 20 cULus 4–6 175°F/79°C 135°F/57°C
4.9 x 6.1 cULus 100 – 150 135°F/57°C 155°F/68°C
175°F/79°C 135°F/57°C
6 – 12 155°F/68°C
150 – 300

2 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.
NOTE
• Listings and approval as of printing.

ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.

victaulic.com © 2021 Victaulic Company. All rights reserved.

42.03 16379 Rev A Updated 02/2021 1

victaulic.com
2.0 CERTIFICATION/LISTINGS

SIN V8113

Nominal K Factor Imperial 8.0
Nominal K Factor S.I.2 11.5

Installation Type Domed Concealed Horizontal Sidewall

Maximum Top of Deflector Approved Approved Minimum
Coverage Area Temperature Coverplate Spacing
Width x Length Ceiling Flow Pressure Temperature
GPM PSI Ratings Ft.
Ft. x Ft Listing Agency in Response L/min kPa Ratings m
mxm mm QR 26 10.6 F°/C°
98 73 135°F/57°C F°/C° 8
16 x 16 cULus 4 – 12 155°F/68°C 135°F/57°C 2.4
4.9 x 4.9 100 – 300 29 13.1 175°F/79°C 135°F/57°C
110 90 135°F/57°C 155°F/68°C
16 x 18 cULus 4–6 QR 155°F/68°C 135°F/57°C
4.9 x 5.5 cULus 100 – 150 QR 32 16.0 175°F/79°C 135°F/57°C
121 110 135°F/57°C 155°F/68°C
6 – 12 155°F/68°C 135°F/57°C
150 – 300 32 16.0 175°F/79°C 135°F/57°C
121 110 135°F/57°C 155°F/68°C
16 x 20 cULus 4–6 QR 37 21.4 155°F/68°C 135°F/57°C
4.9 x 6.1 cULus 100 – 150 QR 140 148 175°F/79°C 135°F/57°C
135°F/57°C 155°F/68°C
6 – 12 175°F/79°C 135°F/57°C
150 – 300 155°F/68°C

SIN V8114

Nominal K Factor Imperial 8.0
Nominal K Factor S.I.2 11.5

Installation Type Domed Concealed Horizontal Sidewall

Maximum Top of Deflector Flow Pressure Approved Approved Minimum
Coverage Area Ceiling GPM PSI Temperature Coverplate Spacing
Width x Length L/min kPa Temperature
Ratings Ft.
Ft. x Ft Listing Agency in Response 36 20.3 F°/C° Ratings m
mxm mm QR 136 140 F°/C°
QR 39 23.8 135°F/57°C 8
16 x 22 cULus 4–6 QR 148 164 135°F/57°C 135°F/57°C 2.4
4.9 x 6.7 100 – 150 QR 36 20.3 135°F/57°C 135°F/57°C
136 140 135°F/57°C 135°F/57°C
16 x 24 cULus 4–6 40 25.0 135°F/57°C
4.9 x 7.3 100 – 150 151 172

18 x 20 cULus 4 – 12
5.1 x 6.1 100 – 300

18 x 22 cULus 4 – 12
5.1 x 6.7 100 – 300

2 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

NOTE
• Listings and approval as of printing.

42.03 16379 Rev A Updated 02/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 2

victaulic.com 2½"/
64 mm
3.0  SPECIFICATIONS – MATERIAL
Deflector: Bronze ⁄ "/11 mm
Bulb Nominal Diamter: 3.0 mm Nominal make-in
Load Screw: Brass
Pip Cap: Brass De ector Frame
Spring Seal: PTFE coated Beryllium nickel alloy Lodgement spring
Frame: Brass Load screw Bulb Cup
Concealed Cup: Steel
Cover Plate: Steel Pip cap and
Lodgement Spring: Stainless Steel spring seal
Installation Wrench: Ductile Iron
Cover Plate Finishes: V5613, V8113, V8114
• Chrome plated
• White painted
• Flat black painted
• Custom painted

NOTE
• For cabinets and other accessories refer to separate sheet.

4.0 DIMENSIONS

Cover plate 3 ⁄ "/ Finished ceiling
79 mm Reducer
12"/305 mm
4"/102 mm

3 ⁄ "/ 2 ⁄ "/67 mm
84 mm 2½"/64 mm
Hole in wall

Finished surface

1"/ 1 ⁄ "/41 mm
25 mm 1 ⁄ "/29 mm

V5613, V8113, V8114

42.03 16379 Rev A Updated 02/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 3

Victaulic® FireLock™ Series FL-ECLH/SW 42.02
Extended Coverage, Quick Response
Horizontal Sidewall and Recessed Horizontal Sidewall
Sprinklers K5.6 (8.1), K8.0 (11.5)

1.0  PRODUCT DESCRIPTION

EXTENDED COVERAGE QUICK RESPONSE HORIZONTAL SIDEWALL SPRINKLERS

SIN V2758 V3416

ORIENTATION HSW HSW

K-FACTOR1 5.6 Imp./8.1 S.I. 8.0 Imp./11.5 S.I.

CONNECTION 1/2" NPT/15 mm 3/4” NPT/20 mm

MAX. WORKING PRESSURE 175 psi (1200 kPa) 175 psi (1200 kPa)

GLOBE RE-DESIGNATION – –

GLOBE EQUIVALENT GL5628 GL8129

EXTENDED COVERAGE QUICK RESPONSE RECESSED HORIZONTAL SIDEWALL SPRINKLERS

SIN V2758 V3416

ORIENTATION HSW HSW

K-FACTOR1 5.6 Imp./8.1 S.I. 8.0 Imp./11.5 S.I.

CONNECTION 1/2" NPT/15 mm 3/4” NPT/20 mm

MAX. WORKING PRESSURE 175 psi (1200 kPa) 175 psi (1200 kPa)

ESCUTCHEON Recessed Recessed

GLOBE RE-DESIGNATION – –

GLOBE EQUIVALENT GL5628 GL8129

SPRINKLER V27 Recessed AVAILABLE WRENCHES V34 Recessed V34 Open End
SIDEWALL V27 Open End

Factory Hydrostatic Test: 100% @ 500 psi/3447 kPa/34 bar
Min. Operating Pressure: UL/FM: 7psi/48 kPa/.5 bar
Temperature Rating: See tables in section 2.0

1 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.

victaulic.com © 2021 Victaulic Company. All rights reserved.

42.02 16378 Rev B Updated 06/2021 1

victaulic.com
2.0 CERTIFICATION/LISTINGS

SIN V2758

Nominal K Factor Imperial 5.6
8.1
Nominal K Factor S.I.2
Recessed Horizontal Sidewall
Installation Type Horizontal Sidewall

Max. Top of Approved Approved
Coverage Deflector Temperature Temperature Minimum
Ceiling Flow Pressure Ratings Adjustment Flow Pressure Ratings Spacing
Area GPM GPM
Width x L/min L/min
Length

Ft x Ft Listing in PSI in PSI Ft
mxm Agency mm Response kPa F°/C° Response mm kPa F°/C° m

4–6 135°F/57°C 135°F/57°C
100 – 150 26 21.5 155°F/68°C 1/2 and 3/4 26 21.5 155°F/68°C
cULus QR 98 148 175°F/79°C QR 15 and 20 98 148 175°F/79°C

200°F/93°C 200°F/93°C

16 x 16 6 – 12 135°F/57°C 135°F/57°C
4.9 x 4.9 150 – 300 26 21.5 155°F/68°C 1/2 and 3/4 26 21.5 155°F/68°C
cULus QR 98 148 175°F/79°C QR 15 and 20 98 148 175°F/79°C

200°F/93°C 200°F/93°C

See FM QR 26 21.5 135°F/57°C QR 1/2 26 22 135°F/57°C
FM Datasheet 98 148 155°F/68°C 15 98 152 155°F/68°C
175°F/79°C 175°F/79°C
2–0

4–6 135°F/57°C 135°F/57°C
100 – 150 29 26.8 155°F/68°C 1/2 and 3/4 29 26.8 155°F/68°C
cULus QR 110 185 175°F/79°C QR 15 and 20 110 185 175°F/79°C

200°F/93°C 200°F/93°C

16 x 18 cULus 6 – 12 QR 29 135°F/57°C QR 1/2 and 3/4 29 135°F/57°C
4.9 x 5.5 150 – 300 110 27 155°F/68°C 15 and 20 110 27 155°F/68°C
186 175°F/79°C 186 175°F/79°C
200°F/93°C 200°F/93°C

See FM QR 30 29 135°F/57°C QR 1/2 30 29 135°F/57°C
FM Datasheet QR 115 200 155°F/68°C 15 115 200 155°F/68°C
32 1/2 and 3/4 32
2–0 121 15 and 20 121 135°F/57°C 8
33 155°F/68°C 2.4
4–6 33 135°F/57°C 228 175°F/79°C
100 – 150 228 155°F/68°C
cULus 175°F/79°C QR

200°F/93°C 200°F/93°C

16 x 20 6 – 12 135°F/57°C 135°F/57°C
4.9 x 6.1 150 – 300 32 33 155°F/68°C 1/2 and 3/4 32 33 155°F/68°C
cULus QR 121 228 175°F/79°C QR 15 and 20 121 228 175°F/79°C

200°F/93°C 200°F/93°C

See FM QR 33 35 135°F/57°C QR 1/2 33 35 135°F/57°C
FM Datasheet 125 241 155°F/68°C 15 125 241 155°F/68°C

2–0

4–6 135°F/57°C 135°F/57°C
100 – 150 36 41.3 155°F/68°C 1/2 and 3/4 36 41.3 155°F/68°C
cULus QR 148 285 175°F/79°C QR 15 and 20 148 285 175°F/79°C

16 x 22 QR 200°F/93°C 200°F/93°C
4.9 x 6.7 QR
16 x 24 6 – 12 QR 36 135°F/57°C 135°F/57°C
4.9 x 7.3 150 – 300 148 41.3 155°F/68°C 1/2 and 3/4 36 41.3 155°F/68°C
cULus 285 175°F/79°C QR 15 and 20 148 285 175°F/79°C

200°F/93°C 200°F/93°C

cULus 4–6 39 49 135°F/57°C QR 1/2 and 3/4 39 49 135°F/57°C
cULus 100 – 150 148 338 175°F/79°C 15 and 20 148 338 175°F/79°C

6 – 10 40 51 135°F/57°C QR 1/2 and 3/4 40 51 135°F/57°C
150 – 250 151 352 175°F/79°C 15 and 20 151 352 175°F/79°C

2 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

NOTES
• Listings and approval as of printing.

• See FM Datasheet 2-0 for vertically locating sprinklers.

42.02 16378 Rev B Updated 06/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 2

victaulic.com

2.0  CERTIFICATION/LISTINGS (CONTINUED)

SIN Horizontal Sidewall V3416

Nominal K Factor Imperial 8.0
Nominal K Factor S.I.2 11.5

Installation Type Recessed Horizontal Sidewall

Max. Top of Flow Approved Adjustment Flow Approved
Coverage Deflector GPM Temperature GPM Temperature Minimum
Ceiling L/min Pressure Ratings L/min Pressure Ratings Spacing
Area
Width x Listing in PSI in PSI Ft
Length Agency mm Response kPa F°/C° Response mm kPa F°/C° m
Ft x Ft
mxm

4–6 135°F/57°C 135°F/57°C
100 – 150 26 10.6 155°F/68°C 1/2 and 3/4 26 10.6 155°F/68°C
cULus QR 98 73 175°F/79°C QR 15 and 20 98 73 175°F/79°C

200°F/93°C 200°F/93°C

cULus 6 – 12 QR 28 12.3 135°F/57°C QR 1/2 and 3/4 28 12.3 135°F/57°C
150 – 300 QR 106 85 155°F/68°C 15 and 20 106 85 155°F/68°C
16 x 16 QR 32 16 175°F/79°C QR 175°F/79°C
4.9 x 4.9 121 110 200°F/93°C SR 1/2 32 16 200°F/93°C
Applicable Local 135°F/57°C QR 15 121 110 135°F/57°C
See FM 155°F/68°C 1/2 32 16 155°F/68°C
FM Datasheet Standard 15 121 110
155°F/68°C 1/2 and 3/4 Applicable Local 155°F/68°C
2–0 15 and 20
Applicable Standard
CCC Local Stan-

dard

135°F/57°C 29 135°F/57°C
4–6 29 13.2 155°F/68°C 1/2 and 3/4 110 13.2 155°F/68°C
cULus 100 – 150 QR 110 91 175°F/79°C QR 15 and 20 91 175°F/79°C

200°F/93°C 200°F/93°C

cULus 6 – 12 QR 33 17.1 135°F/57°C QR 1/2 and 3/4 33 17.1 135°F/57°C
150 – 300 QR 125 118 155°F/68°C 15 and 20 125 118 155°F/68°C
16 x 18 QR 36 20 175°F/79°C QR 175°F/79°C 8
4.9 x 5.5 136 140 200°F/93°C SR 1/2 36 20 200°F/93°C 2.4
Applicable Local 135°F/57°C QR 15 136 140 135°F/57°C
See FM 155°F/68°C 1/2 36 20 155°F/68°C
FM Datasheet Standard 15 136 140
155°F/68°C 1/2 and 3/4 Applicable Local 155°F/68°C
2–0 15 and 20
Applicable Standard
CCC Local Stan-

dard

135°F/57°C 32 135°F/57°C
4–6 32 16 155°F/68°C 1/2 and 3/4 121 16 155°F/68°C
cULus 100 – 150 QR 121 110 175°F/79°C QR 15 and 20 110 175°F/79°C

200°F/93°C 200°F/93°C

cULus 6 – 12 QR 35 19.2 135°F/57°C QR 1/2 and 3/4 35 19.2 135°F/57°C
150 – 300 QR 132 132 155°F/68°C 15 and 20 132 132 155°F/68°C
16 x 20 QR 40 25 175°F/79°C QR 175°F/79°C
4.9 x 6.1 151 170 200°F/93°C SR 1/2 40 25 200°F/93°C
Applicable Local 135°F/57°C QR 15 151 170 135°F/57°C
See FM 155°F/68°C 1/2 40 25 155°F/68°C
FM Datasheet Standard 15 151 170
155°F/68°C 1/2 and 3/4 Applicable Local 155°F/68°C
2–0 15 and 20
Applicable Standard
CCC Local Stan-

dard

2 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

NOTES
• Listings and approval as of printing.

• See FM Datasheet 2-0 for vertically locating sprinklers.

42.02 16378 Rev B Updated 06/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 3

victaulic.com
2.0  CERTIFICATION/LISTINGS (CONTINUED)

SIN V3416

Nominal K Factor Imperial 8.0
11.5
Nominal K Factor S.I.2
Recessed Horizontal Sidewall
Installation Type Horizontal Sidewall

Max. Top of Flow Approved Adjustment Flow Approved
Coverage Deflector GPM Temperature GPM Temperature Minimum
Ceiling L/min Pressure Ratings L/min Pressure Ratings Spacing
Area
Width x
Length

Ft x Ft Listing in PSI in PSI Ft
m x m Agency mm Response kPa F°/C° Response mm kPa F°/C° m

cULus 4–6 QR 36 20.3 135°F/57°C QR 1/2 and 3/4 36 20.3 135°F/57°C
100 – 150 QR 136 140 155°F/68°C 15 and 20 136 140 155°F/68°C
QR 36 20.3 175°F/79°C QR 175°F/79°C
cULus 6 – 12 136 140 135°F/57°C QR 1/2 and 3/4 36 20.3 135°F/57°C
150 – 300 QR 44 30.3 135°F/57°C SR 15 and 20 136 140 135°F/57°C
QR 167 209 155°F/68°C 44 30.3 155°F/68°C
16 x 22 See FM QR QR 1/2 167 209
4.9 x 6.1 FM Datasheet QR Applicable Local 155°F/68°C 15 44 30.3 155°F/68°C
16 x 24 Standard 135°F/57°C QR 1/2 167 209 135°F/57°C
4.9 x 7.3 2–0 QR 175°F/79°C QR 15 175°F/79°C
39 23.8 135°F/57°C QR Applicable Local 135°F/57°C
CCC Applicable 148 164 175°F/79°C SR 1/2 and 3/4 Standard 175°F/79°C 8
cULus Local Stan- 41 26.3 135°F/57°C 15 and 20 135°F/57°C 2.4
cULus 155 181 155°F/68°C QR 39 23.8 155°F/68°C
dard 48 36 1/2 and 3/4 148 164
4–6 182 250 155°F/68°C 15 and 20 41 26.3 155°F/68°C
100 – 150 1/2 and 3/4 155 181
6 – 12 Applicable Local 15 and 20 48 36
150 – 300 Standard 182 250
1/2 48 36
See FM 15 182 250
FM Datasheet 1/2
15 Applicable Local
2–0 Standard
1/2 and 3/4
Applicable 15 and 20
CCC Local Stan-

dard

2 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

NOTES
• Listings and approval as of printing.

• See FM Datasheet 2-0 for vertically locating sprinklers.

42.02 16378 Rev B Updated 06/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 4

victaulic.com 2 ⁄ "/ ⁄ "/11 mm
75 mm Nominal make-in
3.0  SPECIFICATIONS – MATERIAL
1 ⁄ "/ 1"/
Deflector: Bronze 40 mm 25 mm
Bulb Nominal Diameter: 3.0mm
Load Screw: Bronze De ector Frame
Pip Cap: Bronze Load screw
Spring Seal Assembly: PTFE coated Beryllium nickel Bulb Lodgement spring
alloy Pip cap and
Frame: Brass spring seal
Lodgement Spring: Stainless Steel
Installation Wrench: Ductile iron V2758
Sprinkler Frame Finishes:
• Plain brass 3 ⁄ "/ ½"/13 mm
• Chrome plated 78 mm Nominal make-in
• White polyester painted3, 4
• Flat black polyester painted3, 4 1 ⁄ "/ 1 ⁄ "/
• Custom polyester painted3, 4 40 mm 33 mm
• VC-2505
De ector Frame
3 Not available on the Intermediate Level Style Pendent. Load screw Lodgement spring
4 UL Listed for corrosion resistance. Bulb
5 UL Listed and FM Approved for corrosion resistance. Pip cap and
spring seal
NOTE
• For cabinets and other accessories refer to separate sheet. V3416

42.02 16378 Rev B Updated 06/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 5

victaulic.com 2 ⁄ "/59 mm Max.
4.0 DIMENSIONS 1 ⁄ "/47 mm Min. (½" Adj.)
1 ⁄ "/40 mm Min. (¾" Adj.)
12"/305 mm
4"/102 mm Finished ceiling
per NFPA
2 ⁄ "/60 mm
2 ⁄ "/ 2"/51 mm
73 mm Hole in wall

Finished surface ⁄ "/22 mm Max. (¾" Adj.)
Typical wall ⁄ "/16 mm Max. (½" Adj.)

V2758 ⁄ "/3 mm Min.

2 ⁄ "/60 mm Max.
1 ⁄ "/49 mm Min. (½" Adj.)
1 ⁄ "/41 mm Min. (¾" Adj.)

12"/305 mm Finished ceiling
4"/102 mm Reducer
per NFPA
2 ⁄ "/60 mm
2 ⁄ "/ 2"/51 mm
75 mm Hole in wall

Finished surface ⁄ "/22 mm Max. (¾" Adj.)
Typical wall ⁄ "/16 mm Max. (½" Adj.)

V3416 ⁄ "/3 mm Min.

5.0 PERFORMANCE
Sprinkler is to be installed and designed as per NFPA, FM Datasheets, or any local standards.

42.02 16378 Rev B Updated 06/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 6

Victaulic® FireLock™ Series FL-SR/ST 44.51
Storage, Standard Response
Upright, Pendent and Recessed Pendent Sprinklers
K11.2 (16.2)

1.0  PRODUCT DESCRIPTION

STANDARD RESPONSE STORAGE SPRINKLERS

SIN V3403 V3407

SPRINKLER TYPE CMDA CMDA

SPRINKLER RESPONSE SR SR

ORIENTATION Upright Pendent

K-FACTOR1 11.2 Imp./16.1 S.I. 11.2 Imp./16.1 S.I.

CONNECTION ¾" NPT/20mm BSPT/IGS ¾" NPT/20mm BSPT/IGS

MAX. WORKING PRESSURE 175 psi (1200 kPa) 175 psi (1200 kPa)

GLOBE EQUIVALENT GL1167 GL1160

AVAILABLE GUARDS/SHIELDS

SPRINKLER V34/V36 Guard

UPRIGHT ■

PENDENT ■

AVAILABLE WRENCHES

SPRINKLER V34 Recessed V34 Open End 3/16 Hex-Bit (V9)
UPRIGHT ■
PENDENT ■■
■
■■

Factory Hydrostatic Test: 100% @ 500 psi/3447 kPa/34 bar
Min. Operating Pressure: UL/FM: 7 psi/48 kPa/.5 bar
Temperature Rating: See tables in section 2.0

1 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.

victaulic.com © 2021 Victaulic Company. All rights reserved.

44.51 16389 Rev A Updated 02/2021 1

victaulic.com
2.0 CERTIFICATION/LISTINGS

SIN V3403 11.2 V3407
Nominal K Factor Imperial 16.1
Upright Pendent
Nominal K Factor S.I.2 Flush/Extended
Installation Type 135°F/57°C Approved Temperature Rating 135°F/57°C
Escutcheon 155°F/68°C 155°F/68°C
175°F/79°C 175°F/79°C
cULus 200°F/93°C 200°F/93°C
286°F/141°C 286°F/141°C
FM 135°F/57°C 135°F/57°C
1/2" ADJUSTMENT ESCUTCHEON ONLY 155°F/68°C 155°F/68°C
175°F/79°C 175°F/79°C
200°F/93°C 200°F/93°C
286°F/141°C 286°F/141°C

2 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

NOTE
• Listings and approval as of printing.

3.0  SPECIFICATIONS – MATERIAL

Deflector: Bronze
Bulb Nominal Diameter: 3.0mm
Load Screw: Bronze
Pip Cap: Bronze
Spring Seal: PTFE coated Beryllium nickel alloy
Frame: Brass
Lodgement Spring: Stainless steel
Coupling: Refer to Victaulic publication 10.65
Installation Wrench: Ductile iron
Sprinkler Frame Finishes:
• Plain brass
• Chrome plated
• White polyester painted3, 4
• Flat black polyester painted3, 4
• Custom polyester painted3, 4
• VC-2505

3 Not available on the Intermediate Level Style Pendent.
4 UL Listed for corrosion resistance.
5 UL Listed and FM Approved for corrosion resistance.

NOTE
• For cabinets and other accessories refer to separate sheet.

44.51 16389 Rev A Updated 02/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 2

victaulic.com
4.0 DIMENSIONS

1 ⁄ "/47 mm 1 ⁄ "/
47 mm
De ector
De ector 1¾"/ 2½"/
44 mm Load screw 63 mm
Load screw Bulb
Bulb 2½"/
63 mm Pip cap and
Pip cap and spring seal
spring seal Lodgement spring
Lodgement spring
Frame
Frame Coupling

Threaded ½"/13 mm Grooved
V3403 Nominal make-in V3403
½"/13 mm
Nominal make-in

Frame 2½"/ Coupling 2½"/
63 mm Frame 63 mm
Lodgement spring 1¾"/
44 mm Lodgement spring
Pip cap and
spring seal 1 ⁄ "/ Pip cap and
33 mm spring seal
Bulb Threaded
Load screw V3407 Bulb
Load screw
De ector
De ector
1 ⁄ "/
33 mm
Grooved
V3407

5.0 PERFORMANCE

Sprinkler is to be installed and designed as per NFPA, FM Datasheets, or any local standards.

COMMODITY SELECTION AND DESIGN CRITERIA OVERVIEW

Storage Type NFPA FM

Open Frame (that is, no solid shelves) Single, Double, Multiple-Row, NFPA 13 Datasheet 2-0
or Portable Rack Storage of Class I-IV and Group A or B Plastics
NFPA 13 Datasheet 2-0
Solid Pile or Palletized Storage of Class I-IV and Group A or B Plastics NFPA 13 Datasheet 8-24
Idle Pallet Storage NFPA 13 Datasheet 8-3
Rubber Tire Storage NFPA 13 Datasheet 8-21
NFPA 30 Datasheet 7-29
Rolled Paper Storage (Refer to the standard.) NFPA 30B Datasheet 7-31
Flammable Liquid Storage (Refer to the standard.)
Refer to NFPA 13 N/A
Aerosol Storage (Refer to the standard.)
Automotive Components in Portable Racks
(Control mode only, refer to the standard.)

44.51 16389 Rev A Updated 02/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 3

Victaulic® FireLock™ Series FL-SR/ST/INT 44.71
Storage, Standard Response
Upright and Pendent Sprinklers K5.6 (8.1), K8.0 (11.5)

1.0  PRODUCT DESCRIPTION

SIN UPRIGHT SPRINKLERS V3417
ORIENTATION
V2721 Upright
K-FACTOR1 Upright 8.0 Imp./11.5 S.I.
CONNECTION 5.6 Imp./8.1 S.I. 3/4" NPT/20mm BSPT/IGS
MAX. WORKING PRESSURE 1/2" NPT/15mm BSPT/IGS 175 psi (1200 kPa)
175 psi (1200 kPa)

SIN PENDENT SPRINKLERS V3419
ORIENTATION
V2723 Pendent
K-FACTOR1 Pendent 8.0 Imp./11.5 S.I.
CONNECTION 5.6 Imp./8.1 S.I. 3/4" NPT/20mm BSPT/IGS
MAX. WORKING PRESSURE 1/2" NPT/15mm BSPT/IGS 175 psi (1200 kPa)
175 psi (1200 kPa)

SPRINKLER AVAILABLE GUARDS/SHIELDS V34
UPRIGHT
PENDENT V27 ■
■
■
■

AVAILABLE WRENCHES

SPRINKLER V27 Open End V34 Open End 3/16 Hex-Bit (V9)
UPRIGHT ■
PENDENT ■■
■
■■

Factory Hydrostatic Test: 100% @ 500 psi/3447 kPa/34 bar
Min. Operating Pressure: UL/FM: 7 psi/48 kPa/.5 bar
Temperature Rating: See tables in section 2.0

1 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.

victaulic.com © 2021 Victaulic Company. All rights reserved.

44.71 16392 Rev A Updated 03/2021 1

victaulic.com
2.0 CERTIFICATION/LISTINGS

UPRIGHT APPROVALS/LISTINGS

SIN V2721 V3417
Nominal K Factor Imperial
5.6 8
Nominal K Factor S.I.2 8.1 11.5
Orientation INTERMEDIATE UPRIGHT INTERMEDIATE UPRIGHT

cULus Approved Temperature Ratings F°/C°

FM 135°F/57°C 135°F/57°C
155°F/68°C 155°F/68°C
175°F/79°C 175°F/79°C
200°F/93°C 200°F/93°C
286°F/141°C 286°F/141°C
360°F/182°C 360°F/182°C

135°F/57°C 135°F/57°C
155°F/68°C 155°F/68°C
175°F/79°C 175°F/79°C
200°F/93°C 200°F/93°C
286°F/141°C 286°F/141°C
360°F/182°C 360°F/182°C

PENDENT APPROVALS/LISTINGS

SIN V2723 V3419
Nominal K Factor Imperial
5.6 8
Nominal K Factor S.I.2 8.1 11.5
Orientation INTERMEDIATE PENDENT INTERMEDIATE PENDENT

cULus Approved Temperature Ratings F°/C°

FM 135°F/57°C 135°F/57°C
155°F/68°C 155°F/68°C
175°F/79°C 175°F/79°C
200°F/93°C 200°F/93°C
286°F/141°C 286°F/141°C
360°F/182°C 360°F/182°C

135°F/57°C 135°F/57°C
155°F/68°C 155°F/68°C
175°F/79°C 175°F/79°C
200°F/93°C 200°F/93°C
286°F/141°C 286°F/141°C
360°F/182°C 360°F/182°C

2 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

NOTES
• Listings and approval as of printing.

44.71 16392 Rev A Updated 03/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 2

victaulic.com

3.0  SPECIFICATIONS – MATERIAL

Deflector: Bronze
Bulb Nominal Diameter: 3.0mm
Load Screw: Bronze
Pip Cap: Bronze
Spring Seal Assembly: PTFE coated Beryllium nickel alloy
Frame: Brass
Lodgement Spring: Stainless Steel
Nut: Stainless Steel
Washer: Nylon
Guard: Steel
Plate: Steel
O-ring: EPDM
Coupling: Refer to Victaulic publication 10.65
Installation Wrench: Ductile iron
Sprinkler Frame Finishes: Plain brass

NOTE
• For cabinets and other accessories refer to separate sheet.

4.0 DIMENSIONS

3"/ Guard 4"/
76 mm 102 mm
Nut De ector
Grooved
Washer Load screw V2721
Plate De ector Bulb

Load screw Pip cap and 2 ⁄ "/ 3¼"/
Bulb spring seal 60 mm 83 mm
Lodgement spring
Pip cap and 2 ⁄ "/
spring seal 2 ⁄ "/ 67 mm Frame
Lodgement spring 60 mm Coupling

Frame

⁄ "/11 mm
Nominal make-in

Threaded
V2721

44.71 16392 Rev A Updated 03/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 3

victaulic.com
4.0  DIMENSIONS (CONTINUED)

3"/ Guard 4"/
76 mm 102 mm
Nut De ector
Grooved
Plate Washer Load screw V3417
Bulb
De ector 3"/ 2½"/ 3 ⁄ "/
Pip cap and 76 mm 63 mm 86 mm
Load screw spring seal
Bulb 2¾"/ Lodgement spring Grooved
70 mm V2723
Pip cap and ½"/13 mm Frame
spring seal Nominal make-in Coupling 3"/
Lodgement spring 76 mm
Grooved
Frame V3419

Threaded
V3417

3"/ ⁄ "/11 mm Guard
76 mm Nominal make-in De ector
2 ⁄ "/ Load screw
Plate O-ring 60 mm 3 ⁄ "/
Bulb 85 mm
Pip cap and
O-ring spring seal 2 ⁄ "/
Frame Lodgement spring 60 mm
Lodgement spring
Frame
Pip cap and
spring seal Plate

Bulb Coupling
Load screw
De ector

Threaded
V2723

Frame ½"/13 mm Coupling 2½"/ 3 ⁄ "/
O-ring Nominal make-in 63 mm 85 mm
2½"/ Frame
Plate 63 mm
Lodgement spring Lodgement spring
Pip cap and
Pip cap and spring seal
spring seal Bulb
Load screw
Bulb De ector
Load screw Guard

De ector 3"/
76 mm

Threaded
V3419

44.71 16392 Rev A Updated 03/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 4

Victaulic® FireLock™ Series FL-QR/ST 44.01
Storage, Quick Response
Upright, Pendent and Recessed Pendent Sprinklers
K11.2 (16.2)

1.0  PRODUCT DESCRIPTION

QUICK RESPONSE STORAGE SPRINKLERS

SIN V3404 V3408

SPRINKLER TYPE CMDA CMDA

SPRINKLER RESPONSE QR QR

ORIENTATION Upright Pendent

K-FACTOR1 11.2 Imp./16.1 S.I. 11.2 Imp./16.1 S.I.

CONNECTION ¾" NPT/20mm BSPT/IGS ¾" NPT/20mm BSPT/IGS

MAX. WORKING PRESSURE 175 psi (1200 kPa) 175 psi (1200 kPa)

GLOBE EQUIVALENT GL1123 GL1114

AVAILABLE GUARDS

SPRINKLER V34/V36 Guard
Upright ■
Pendent ■

AVAILABLE WRENCHES

SPRINKLER V34 Recessed V34 Open End 3/16 Hex-Bit (V9)
Upright ■
Pendent ■■
■
■■

Factory Hydrostatic Test: 100% @ 500 psi/3447 kPa/34 bar
Min. Operating Pressure: UL/FM: 7 psi/48 kPa/.5 bar
Temperature Rating: See tables in section 2.0

1 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.

victaulic.com © 2021 Victaulic Company. All rights reserved.

44.01 16385 Rev A Updated 03/2021 1

victaulic.com
2.0 CERTIFICATION/LISTINGS

SIN V3404 V3408
Nominal K Factor Imperial
11.2
Nominal K Factor S.I.2
Installation Type 16.1
Escutcheon
Upright Pendent
cULus
Flush/Extended/Recessed Flush/Extended/Recessed
FM
1/2" ADJUSTMENT Approved Temperature Ratings F°/C°
ESCUTCHEON ONLY
135°F/57°C 135°F/57°C
155°F/68°C 155°F/68°C
175°F/79°C 175°F/79°C
200°F/93°C 200°F/93°C
286°F/141°C 286°F/141°C

135°F/57°C 135°F/57°C
155°F/68°C 155°F/68°C
175°F/79°C 175°F/79°C
200°F/93°C 200°F/93°C
286°F/141°C 286°F/141°C

2 For K-Factor when pressure is measured in Bar, multiply S.I. units by 10.

NOTE
• Listings and approval as of printing.

3.0  SPECIFICATIONS – MATERIAL

Deflector: Bronze
Bulb Nominal Diameter: 3.0mm
Load Screw: Bronze
Pip Cap: Bronze
Spring Seal: PTFE coated Beryllium nickel alloy
Frame: Brass
Lodgement Spring: Stainless steel
Coupling: Refer to Victaulic publication 10.65
Installation Wrench: Ductile iron
Sprinkler Frame Finishes:
• Plain brass
• Chrome plated
• White polyester painted3, 4
• Flat black polyester painted3, 4
• Custom polyester painted3, 4
• VC-2505

3 Not available on the Intermediate Level Style Pendent.
4 UL Listed for corrosion resistance.
5 UL Listed and FM Approved for corrosion resistance.

NOTE
• For cabinets and other accessories refer to separate sheet.

44.01 16385 Rev A Updated 03/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 2

victaulic.com
4.0 DIMENSIONS

1 ⁄ "/47 mm De ector 1 ⁄ "/
1¾"/ 47 mm
44 mm Load screw
De ector 2½"/ Bulb 2½"/
63 mm 63 mm
Load screw Pip cap and
Bulb spring seal 2½"/
Lodgement spring 63 mm
Pip cap and
spring seal Frame FM
Lodgement spring Coupling Datasheet 2-0
Datasheet 2-0
Frame Datasheet 8-24
Datasheet 8-3
Threaded ½"/13 mm Grooved Datasheet 8-21
V3404 Nominal make-in V3404 Datasheet 7-29
Datasheet 7-31
½"/13 mm
Nominal make-in N/A

Frame 2½"/ Coupling
63 mm Frame
Lodgement spring 1¾"/
44 mm Lodgement spring
Pip cap and
spring seal 1 ⁄ "/ Pip cap and
33 mm spring seal
Bulb Threaded
Load screw V3408 Bulb
Load screw
De ector
De ector
1 ⁄ "/
33 mm
Grooved
V3408

5.0 PERFORMANCE

Sprinkler is to be installed and designed as per NFPA, FM Datasheets, or any local standards.

COMMODITY SELECTION AND DESIGN CRITERIA OVERVIEW

Storage Type NFPA

Open Frame (that is, no solid shelves) Single, Double, Multiple-Row, or Portable Rack NFPA 13
Storage of Class I-IV and Group A or B Plastics
NFPA 13
Solid Pile or Palletized Storage of Class I-IV and Group A or B Plastics NFPA 13
Idle Pallet Storage NFPA 13
Rubber Tire Storage NFPA 13
NFPA 30
Rolled Paper Storage (Refer to the standard.) NFPA 30B
Flammable Liquid Storage (Refer to the standard.) Refer to NFPA 13

Aerosol Storage (Refer to the standard.)
Automotive Components in Portable Racks (Control mode only, refer to the standard.)

44.01 16385 Rev A Updated 03/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 3

Victaulic® FireLock™ Series FL-QR/ST/INT 44.21
Storage, Quick Response
Upright and Pendent Sprinklers K5.6 (8.1), K8.0 (11.5)

1.0  PRODUCT DESCRIPTION

QUICK RESPONSE UPRIGHT SPRINKLERS

SIN V2722 V3418

ORIENTATION Upright Upright

K-FACTOR1 5.6 Imp./8.1 S.I. 8.0 Imp./11.5 S.I.

CONNECTION 1/2" NPT/15mm BSPT/IGS 3/4" NPT/20mm BSPT/IGS

MAX. WORKING PRESSURE 175 psi (1200 kPa) 175 psi (1200 kPa)

QUICK RESPONSE PENDENT SPRINKLERS

SIN V2724 V3420

ORIENTATION Pendent Pendent

K-FACTOR1 5.6 Imp./8.1 S.I. 8.0 Imp./11.5 S.I.

CONNECTION 1/2" NPT/15mm BSPT/IGS 3/4" NPT/20mm BSPT/IGS

MAX. WORKING PRESSURE 175 psi (1200 kPa) 175 psi (1200 kPa)

SPRINKLER AVAILABLE GUARDS/SHIELDS V34
UPRIGHT V27 ■
PENDENT ■ ■

■

AVAILABLE WRENCHES

SPRINKLER V27 Open End V34 Open End 3/16 Hex-Bit (V9)
UPRIGHT ■
PENDENT ■■
■
■■

Factory Hydrostatic Test: 100% @ 500 psi/3447 kPa/34 bar
Min. Operating Pressure: UL/FM: 7 psi/48 kPa/.5 bar
Temperature Rating: See tables in section 2.0

1 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.

victaulic.com © 2021 Victaulic Company. All rights reserved.

44.21 16855 Rev A Updated 03/2021 1

victaulic.com
2.0 CERTIFICATION/LISTINGS

UPRIGHT APPROVALS/LISTINGS

SIN V2722 V3418
Nominal K Factor Imperial
5.6 8.0
Nominal K Factor S.I.2
Orientation 8.1 11.5
Intermediate Upright Intermediate Upright
cULus
Approved Temperature Ratings F°/C°
FM
135°F/57°C 135°F/57°C
155°F/68°C 155°F/68°C
175°F/79°C 175°F/79°C
200°F/93°C 200°F/93°C
286°F/141°C 286°F/141°C

135°F/57°C 135°F/57°C
155°F/68°C 155°F/68°C
175°F/79°C 175°F/79°C
200°F/93°C 200°F/93°C
286°F/141°C 286°F/141°C

PENDENT APPROVALS/LISTINGS

SIN V2724 V3420

Nominal K Factor Imperial 5.6 8.0
Nominal K Factor S.I.2 8.1 11.5
Orientation Intermediate Pendent Intermediate Pendent

Approved Temperature Ratings F°/C°

cULus 135°F/57°C 135°F/57°C
155°F/68°C 155°F/68°C
175°F/79°C 175°F/79°C
200°F/93°C 200°F/93°C
286°F/141°C 286°F/141°C

135°F/57°C 135°F/57°C
155°F/68°C 155°F/68°C
FM 175°F/79°C 175°F/79°C
200°F/93°C 200°F/93°C
286°F/141°C 286°F/141°C

2 For K-Factor when pressure is measured in Bar, multiply S.I. units by 10.

NOTES
• Listings and approval as of printing.

44.21 16855 Rev A Updated 03/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 2

victaulic.com

3.0  SPECIFICATIONS – MATERIAL

Deflector: Bronze
Bulb Nominal Diameter: 3.0mm
Load Screw: Bronze
Pip Cap: Bronze
Spring Seal Assembly: PTFE coated Beryllium nickel alloy
Frame: Brass
Lodgement Spring: Stainless Steel
Nut: Stainless Steel
Washer: Nylon
Guard: Steel
Plate: Steel
O-ring: EPDM
Coupling: Refer to Victaulic publication 10.65
Installation Wrench: Ductile iron
Sprinkler Frame Finishes: Plain brass

NOTE
• For cabinets and other accessories refer to separate sheet.

4.0 DIMENSIONS

4"/
102 mm

Guard Nut 3"/
76 mm
De ector Washer
Load screw Plate De ector

Bulb 2 ⁄ "/ 3¼"/ Load screw
Pip cap and 60 mm 83 mm Bulb
spring seal
Pip cap and 2 ⁄ "/
Frame spring seal 2 ⁄ "/ 68 mm
Coupling Lodgement spring 60 mm

Frame

⁄ "/11 mm
Nominal make-in

Grooved Threaded
V2722 V2722

44.21 16855 Rev A Updated 03/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 3

victaulic.com
4.0  DIMENSIONS (CONTINUED)

4"/
102 mm

Guard

De ector 3"/
76 mm
Load screw Nut
Bulb
Plate Washer
Pip cap and
spring seal 3 ⁄ "/ De ector
Lodgement spring 88 mm
Load screw
Frame 2½"/ Bulb 2¾"/
63 mm 70 mm
Coupling Pip cap and ½"/13 mm
spring seal Nominal make-in
Lodgement spring

Frame

Grooved Threaded
V3418 V3418

Coupling 2 ⁄ "/ 3"/ ⁄ "/11 mm
60 mm 76 mm Nominal make-in
Plate 2 ⁄ "/
Frame 3 ⁄ "/ Plate O-ring 60 mm
Pip cap and 85 mm

spring seal O-ring
Bulb Frame
Lodgement spring
Load screw
De ector 3"/ Pip cap and
Guard 76 mm spring seal

Coupling Grooved Bulb
V2724 Load screw
Plate De ector
Frame
Pip cap and Threaded
V2724
spring seal
Bulb 2½"/ Frame ½"/13 mm
63 mm Nominal make-in
Load screw O-ring
De ector 3 ⁄ "/ 2½"/
Guard 85 mm Plate 63 mm

3"/ Pip cap and 3"/
76 mm spring seal 76 mm

Grooved Bulb Threaded
V3420 Load screw V3420

De ector

44.21 16855 Rev A Updated 03/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 4

FireLock™ Series FL-SR/DRY 45.51
Standard Coverage Standard Response
Dry Upright, Pendent and Recessed Pendent Sprinklers
K5.6 (8.1 SI), K8.0 (11.5 SI)

1.0  PRODUCT DESCRIPTION

UPRIGHT STANDARD RESPONSE DRY SPRINKLERS

SIN V3601 V3603

Orientation UPRIGHT UPRIGHT

K-Factor1 5.6 Imp./8.1 S.I. 8.0 Imp./11.5 S.I.

Connection 1" NPT/25mm BSPT/1" IGS 1" NPT/25mm BSPT/1" IGS

Max. Working Pressure 175 psi (1200 kPa) 175 psi (1200 kPa)

Escutcheon Plain Plain

Globe Equivalent GL5683 GL8183

PENDENT STANDARD RESPONSE DRY SPRINKLERS

SIN V3605 V3607

Orientation PENDENT PENDENT

K-Factor1 5.6 Imp./8.1 S.I. 8.0 Imp./11.5 S.I.

Connection 1" NPT/25mm BSPT/1" IGS 1" NPT/25mm BSPT/1" IGS

Max. Working Pressure 175 psi (1200 kPa) 175 psi (1200 kPa)

Escutcheon Plain/Flush/Sleeve and Skirt/Extended Plain/Flush/Sleeve and Skirt/Extended

Globe Equivalent GL5680 GL8179

RECESSED PENDENT STANDARD RESPONSE DRY SPRINKLERS

SIN V3605 V3607

Orientation PENDENT PENDENT

K-Factor1 5.6 Imp./8.1 S.I. 8.0 Imp./11.5 S.I.

Connection 1" NPT/25mm BSPT/1" IGS 1" NPT/25mm BSPT/1" IGS

Max. Working Pressure 175 psi (1200 kPa) 175 psi (1200 kPa)

Escutcheon Recessed Recessed

Globe Equivalent GL5680 GL8179

AVAILABLE GUARDS/SHIELDS

SPRINKLER V34/V36 V34/V36 Intermediate Shield V34/V36 Int. Shield/Guard

Upright
Pendent

AVAILABLE WRENCHES

SPRINKLER V36 Recessed V36 Open End 3/16 Hex-Bit (V9)

Upright
Pendent

Factory Hydrostatic Test: 100% @ 500 psi/3447 kPa/34 bar
Min. Operating Pressure: Pendent: 7 psi/48 kPa/.5 bar

Upright: 12 psi/83 kPa/0.8 bar
Temperature Rating: See tables in section 2.0

1 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.

victaulic.com © 2021 Victaulic Company. All rights reserved.

45.51 15956 Rev B Updated 06/2021 1

victaulic.com
2.0 CERTIFICATION/LISTINGS

APPROVALS/LISTINGS

SIN V3601 V3603
Nominal K Factor Imperial
5.6 8.0
Nominal K Factor S.I.2 8.1 11.5
Orientation Upright Upright
Escutcheon Plain Plain

cULus Approved Temperature Ratings F°/C°

FM 135°F/57°C 135°F/57°C
155°F/68°C 155°F/68°C
CCC 200°F/93°C 200°F/93°C
286°F/141°C 286°F/141°C

135°F/57°C 135°F/57°C
155°F/68°C 155°F/68°C
200°F/93°C 200°F/93°C
286°F/141°C
155°F/68°C –

APPROVALS/LISTINGS

SIN V3605 V3607 V3605 V3607
Nominal K Factor Imperial 5.6 8.0
8.1 8.0 5.6 11.5
Nominal K Factor S.I.2 11.5 8.1
Orientation Pendent Pendent Pendent Pendent
Escutcheon Plain, Flush, Slv & Skt, Ext Plain, Flush, Slv & Skt, Ext Recessed Recessed

cULus 135°F/57°C Approved Temperature Ratings F°/C° 135°F/57°C
155°F/68°C 155°F/68°C
FM 200°F/93°C 135°F/57°C 135°F/57°C 200°F/93°C
286°F/141°C 155°F/68°C 155°F/68°C 286°F/141°C
CCC 135°F/57°C 200°F/93°C 200°F/93°C
155°F/68°C 286°F/141°C 286°F/141°C 135°F/57°C
200°F/93°C 155°F/68°C
286°F/141°C 135°F/57°C 135°F/57°C 200°F/93°C
155°F/68°C 155°F/68°C 155°F/68°C
200°F/93°C 200°F/93°C
286°F/141°C
155°F/68°C
–

2 For K-Factor when pressure is measured in Bar, multiply S.I. units by 10.

NOTES
• Listings and approval as of printing.
• Temperatures are listed for all hazards and approved for V3605 and V3606 dry sprinklers up to 48" length.
• CCCf approved for V3605 dry sprinklers 107 to 1250 mm/4.2 – 49.2" in length.

45.51 15956 Rev B Updated 06/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 2

victaulic.com Spring seal assembly
Torsion spring
3.0  SPECIFICATIONS – MATERIAL Inlet tting

Deflector: Brass or Stainless Steel Inner tube
Bulb nominal diameter: 5.0mm
Split spacer: Stainless Steel Outer tube
Load screw: Brass
Pip cap: Stainless Steel Ori ce insert
Spring seal assembly: PTFE Coated Beryllium Nickel Escutcheon plate
Alloy and Stainless Steel
Frame: Brass Frame
Inlet fitting: Brass Split spacer
Outer tube: Galvanized Steel Pipe
Inner tube: Stainless Steel Pip cap
Orifice insert: Stainless Steel Bulb
Escutcheon/plate: 1010 - 1018 mild steel and stainless
Load screw
steel De ector
Torsion spring: SST wire Material Speci cations
Installation wrench: Ductile Iron V3605, V3607
Sprinkler frame finishes:
• Plain brass De ector
• Chrome plated Load screw
• White painted3, 4
• Bright White painted3, 4 Bulb
• Flat black painted3, 4 Pip cap
• Custom painted3, 4 Split spacer
• VC-2505 Frame

3 Not available on the Intermediate Level Style Pendent. Ori ce insert
4 UL Listed for corrosion resistance.
5 UL Listed and FM Approved for corrosion resistance. Outer tube
Inner tube
NOTES
• Weather resistant escutcheon available upon request. Escutcheon optional
• For cabinets and other accessories refer to separate sheet. (Not provided)

Torsion spring
Inlet tting

Spring seal assembly
Material Speci cations
V3601, V3603

45.51 15956 Rev B Updated 06/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 3

victaulic.com Tee with same outlet size 1" IGS Fitting
4.0 DIMENSIONS as sprinkler thread size.
See “Important Installation A
A Information”, later in this (3 ⁄ "/
(2"/ 79 mm Min.)
51 mm Min.) document

1" NPT/BSPT

1 ⁄ "/ 1 ⁄ "/
47 mm 47 mm

Plain Barrel, Threaded Plain Barrel, Grooved
V3605, V3607 V3605, V3607

For wet system installation or dry/preaction
systems installed in areas above 40˚F/5˚C

A Tee with same outlet size A 1" IGS Fitting
(1½"/ as sprinkler thread size. (2 ⁄ "/
38 mm Min.) See “Important Installation 67 mm Min.) 1¾"/44 mm Min.
Information”, later in this Hole in ceiling

document Typical ceiling

1" NPT/BSPT

1¾"/44 mm Min.
Hole in ceiling

Typical ceiling

4"/102 mm Finished surface 4"/102 mm Finished surface
2½"/63 mm 2½"/63 mm

3¼"/82 mm 3¼"/82 mm
Sleeve and Skirt, Threaded
Sleeve and Skirt, Grooved
V3605, V3607 V3605, V3607

For wet system installation or dry/preaction
systems installed in areas above 40˚F/5˚C

Standard offering includes made-on escutcheon with "A" dimension shown above. Use the "Adjustments for Optional
Interchangeable Escutcheons" table when making optional field adjustments to the standard ordered escutcheon.

Adjustments for Optional Interchangeable Escutcheons

Escutcheon "A" Dimension Adjustment

Plain Barrel A=A
Flush A = -¼"/6mm
A = +¼"/6mm
Recessed A = -1 3/8"/35mm
Slv/Skrt

45.51 15956 Rev B Updated 06/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 4

victaulic.com 1" IGS Fitting

4.0  DIMENSIONS (CONTINUED) 1½"/38 mm Min.
Hole in ceiling
Tee with same outlet size
as sprinkler thread size. Typical ceiling
See “Important Installation
Information”, later in this

document

A 1" NPT/BSPT A
(1¾"/ (2 ⁄ "/
44 mm Min.) 1½"/38 mm Min. 75 mm Min.)
Hole in ceiling
¼"/ Typical ceiling ¼"/
6 mm 6 mm

2"/ Finished surface 2"/ Finished surface
51 mm 51 mm

3"/76 mm 3"/76 mm
Flush, Threaded Flush, Grooved
V3605, V3607 V3605, V3607

For wet system installation or dry/preaction
systems installed in areas above 40˚F/5˚C

Standard offering includes made-on escutcheon with "A" dimension shown above. Use the "Adjustments for Optional
Interchangeable Escutcheons" table when making optional field adjustments to the standard ordered escutcheon.

Adjustments for Optional Interchangeable Escutcheons

Escutcheon "A" Dimension Adjustment

Plain Barrel A=A
Flush A = -¼"/6mm
A = +¼"/6mm
Recessed A = -1 3/8"/35mm
Slv/Skrt

Tee with same outlet size 1" IGS Fitting
as sprinkler thread size.
A See “Important Installation A 2 ⁄ "/60 mm Min.
(1½"/ Information”, later in this (1½"/ Hole in ceiling
38 mm Min.) 38 mm Min.)
document Typical ceiling
1" NPT/BSPT 5"/126 mm
3¾"/96 mm Finished surface
2 ⁄ "/60 mm Min.
Hole in ceiling

Typical ceiling

5"/126 mm Finished surface
3¾"/96 mm

3½"/89 mm 3½"/89 mm
Extended Sleeve and Skirt, Threaded FoErxwteentdseydsStelemevienasntadlSlaktiirot,nGororodvreyd/preaction
systems insVta36ll0e5d, Vin36a0r7eas above 40˚F/5˚C
V3605, V3607

Extended escutcheons are not available as interchangeable.

45.51 15956 Rev B Updated 06/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 5

victaulic.com
4.0  DIMENSIONS (CONTINUED)

Tee with same outlet size 1" IGS Fitting
as sprinkler thread size.
See “Important Installation A
Information”, later in this (2 ⁄ "/
74 mm Min.)
document

1" NPT/BSPT

A
(2"/
51 mm Min.)

¼"/ ¼"/
6 mm 6 mm

2"/ 2"/
51 mm 51 mm

3"/76 mm 3"/76 mm
Intermediate, Threaded Intermediate, Grooved

V3605, V3607 V3605, V3607
For wet system installation or dry/preaction
systems installed in areas above 40˚F/5˚C

Tee with same outlet size S36-3B0-S409_LIT-01
as sprinkler thread size.
See “Important Installation 1" IGS Fitting
Information”, later in this
A A 2"/51 mm Min.
(2¼"/ document (3 ⁄ "/ Hole in ceiling
57 mm Min.) 87 mm Min.)
1" NPT/BSPT Typical ceiling

2"/51 mm Min.
Hole in ceiling

Typical ceiling

1 ⁄ "/47 mm Finished surface 1 ⁄ "/47 mm Finished surface
1 ⁄ "/28 mm 1 ⁄ "/28 mm

2 ⁄ "/73 mm 2 ⁄ "/73 mm
Recessed, Threaded Recessed, Grooved

V3605, V3607 V3605, V3607

For wet system installation or dry/preaction
systems installed in areas above 40˚F/5˚C

Standard offering includes made-on escutcheon with "A" dimension shown above. Use the "Adjustments for Optional
Interchangeable Escutcheons" table when making optional field adjustments to the standard ordered escutcheon.

Adjustments for Optional Interchangeable Escutcheons

Escutcheon "A" Dimension Adjustment

Plain Barrel A=A
Flush A = -¼"/6mm
A = +¼"/6mm
Recessed A = -1 3/8"/35mm
Slv/Skrt

45.51 15956 Rev B Updated 06/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 6

victaulic.com
4.0  DIMENSIONS (CONTINUED)

1 ⁄ "/47 mm 1 ⁄ "/
47 mm

A 1½"/38 mm Min. 1½"/38 mm Min.
(2"/51 mm Min.) Hole in ceiling Hole in ceiling

Typical ceiling Typical ceiling

Finished surface A Finished surface
(3 ⁄ "/80 mm Min.)
1" NPT/BSPT
1" IGS Fitting
Tee with same outlet size
as sprinkler thread size. Installed Dimensions, Grooved
See “Important Installation V3601, V3603
Information”, later in this
Installed Dimensions, Threaded document For wet system installation or dry/preaction
V3601, V3603 systems installed in areas above 40˚F/5˚C

Standard offering includes made-on escutcheon with "A" dimension shown above. Use the "Adjustments for Optional
Interchangeable Escutcheons" table when making optional field adjustments to the standard ordered escutcheon.

Adjustments for Interchangeable Escutcheons

Escutcheon "A" Dimension Adjustment

Plain Barrel A=A
Flush A = -¼"/6mm
A = +¼"/6mm
Recessed A = -1 3/8"/35mm
Slv/Skrt

45.51 15956 Rev B Updated 06/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 7

FireLock™ Series FL-QR/DRY 45.01
Standard Coverage, Quick Response Dry, Upright, Pendent and
Recessed Pendent Sprinklers K5.6 (8.1), K8.0 (11.5)

1.0  PRODUCT DESCRIPTION

SIN UPRIGHT QUICK RESPONSE DRY SPRINKLERS V3604
ORIENTATION
V3602 UPRIGHT
K-FACTOR1 8.0 Imp./11.5 S.I.
CONNECTION UPRIGHT 1" NPT/25mm BSPT/1" IGS
MAX WORKING PRESSURE 5.6 Imp./8.1 S.I. 175 psi (1200 kPa)
ESCUTCHEON 1" NPT/25mm BSPT/1" IGS
GLOBE EQUIVALENT 175 psi (1200 kPa) Plain
GL8139
Plain
GL5639

SIN PENDENT QUICK RESPONSE DRY SPRINKLERS V3608
ORIENTATION
V3606 PENDENT
K-FACTOR1 8.0 Imp./11.5 S.I.
CONNECTION PENDENT 1" NPT/25mm BSPT/1" IGS
MAX WORKING PRESSURE 5.6 Imp./8.1 S.I. 175 psi (1200 kPa)
ESCUTCHEON 1" NPT/25mm BSPT/1" IGS Plain/Flush/Sleeve and Skirt/Extended
GLOBE EQUIVALENT 175 psi (1200 kPa)
Plain/Flush/Sleeve and Skirt/Extended GL8135

GL5635

SIN RECESSED PENDENT QUICK RESPONSE DRY SPRINKLERS V3608
ORIENTATION
V3606 PENDENT
K-FACTOR1 8.0 Imp./11.5 S.I.
CONNECTION PENDENT 1" NPT/25mm BSPT/1" IGS
MAX WORKING PRESSURE 5.6 Imp./8.1 S.I. 175 psi (1200 kPa)
ESCUTCHEON 1" NPT/25mm BSPT/1" IGS
GLOBE EQUIVALENT 175 psi (1200 kPa) Recessed
GL8135
Recessed
GL5635

AVAILABLE GUARDS/SHIELDS

SPRINKLER V34/V36 V34/V36 Intermediate Shield V34/V36 Int. Shield/Guard
Upright 3/16 Hex Bit (V9)
Pendent

AVAILABLE WRENCHES

Sprinkler V36 Recessed V36 Open End
Upright
Pendent

Factory Hydrostatic Test: 100% @ 500 psi/3447 kPa/34 bar

Min. Operating Pressure: Pendent: 7 psi/48 kPa/.5 bar
Upright: 12 psi/83 kPa/0.8 bar

Temperature Rating: See tables in section 2.0

1 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.

victaulic.com © 2021 Victaulic Company. All rights reserved.

45.01 15896 Rev B Updated 06/2021 1

victaulic.com
2.0 CERTIFICATION/LISTINGS

APPROVALS/LISTINGS

SIN V3602 V3604
Nominal K Factor Imperial
5.6 8.0
Nominal K Factor S.I.2 8.1 11.5
Orientation Upright Upright
Escutcheon Plain Plain

cULus Approved Temperature Ratings F°/C°

FM 135°F/57°C 135°F/57°C
155°F/68°C 155°F/68°C
CCC 200°F/93°C 200°F/93°C
286°F/141°C 286°F/141°C

135°F/57°C 135°F/57°C
155°F/68°C 155°F/68°C
200°F/93°C 200°F/93°C
286°F/141°C
155°F/68°C –

APPROVALS/LISTINGS

SIN V3606 V3608 V3606 V3608
Nominal K Factor Imperial 5.6 8.0
8.1 8.0 5.6 11.5
Nominal K Factor S.I.2 11.5 8.1
Orientation Pendent Pendent Pendent Pendent
Escutcheon Plain, Flush, Slv & Skt, Ext Plain, Flush, Slv & Skt, Ext Recessed Recessed

cULus 135°F/57°C Approved Temperature Ratings F°/C° 135°F/57°C
155°F/68°C 155°F/68°C
FM 200°F/93°C 135°F/57°C 135°F/57°C 200°F/93°C
286°F/141°C 155°F/68°C 155°F/68°C 286°F/141°C
CCC 135°F/57°C 200°F/93°C 200°F/93°C
155°F/68°C 286°F/141°C 286°F/141°C 135°F/57°C
200°F/93°C 155°F/68°C
286°F/141°C 135°F/57°C 135°F/57°C 200°F/93°C
155°F/68°C 155°F/68°C 155°F/68°C
200°F/93°C 200°F/93°C –
286°F/141°C 155°F/68°C

–

2 For K-Factor when pressure is measured in Bar, multiply S.I. units by 10.

NOTES
• Listings and approval as of printing.
• Temperatures are listed for all hazards and approved for V3605 and V3606 dry sprinklers up to 48" length.

45.01 15896 Rev B Updated 06/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 2

victaulic.com Spring seal assembly
Torsion spring
3.0  SPECIFICATIONS – MATERIAL Inlet tting

Deflector: Brass or Stainless Steel Inner tube
Bulb Nominal Diameter: 3.0mm
Split Spacer: Stainless Steel Outer tube
Load Screw: Brass
Pip Cap: Stainless Steel Ori ce insert
Spring Seal Assembly: PTFE coated Beryllium nickel Escutcheon plate
alloy and stainless steel
Frame: Brass Frame
Inlet Fitting: Brass Split spacer
Outer Tube: Galvanized steel pipe
Inner Tube: Stainless Steel Pip cap
Orifice Insert: Stainless Steel Bulb
Escutcheon/Plate: 1010 - 1018 mild steel and stainless
steel Load screw
Torsion Spring: SST wire De ector
Installation Wrench: Ductile iron Material Speci cations
Sprinkler Frame Finishes: V3606, V3608
• Plain brass
• Chrome plated De ector
• White painted3, 4 Load screw
• Bright White painted3, 4
• Flat black painted3, 4 Bulb
• Custom painted3, 4 Pip cap
• VC-25055 Split spacer
Frame
3 Not available on the Intermediate Level Style Pendent.
4 UL Listed for corrosion resistance. Ori ce insert
5 UL Listed and FM Approved for corrosion resistance.
Outer tube
NOTES Inner tube
• Weather resistant escutcheon available upon request.
• For cabinets and other accessories refer to separate sheet. Escutcheon optional
(Not provided)

Torsion spring
Inlet tting

Spring seal assembly
Material Speci cations
V3602, V3604

45.01 15896 Rev B Updated 06/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 3

victaulic.com Tee with same outlet size 1" IGS tting
4.0 DIMENSIONS as sprinkler thread size.
See “Important Installation A
A Information”, later in this (3 ⁄ "/
(2"/ 79 mm Min.)
51 mm Min.) document.

1" NPT/BSPT

1 ⁄ "/ 1 ⁄ "/
47 mm 47 mm

Plain Barrel, Threaded Plain Barrel, Grooved
V3606, V3608 V3606, V3608

Tee with same outlet size For wet system installation or dry/preaction
as sprinkler thread size. systems installed in areas above 40˚F/5˚C
See “Important Installation
Information”, later in this 1" IGS tting

A document. A 1¾"/44 mm Min.
(1½"/ (2 ⁄ "/ Hole in ceiling
38 mm Min.) 1" NPT/BSPT 67 mm Min.)
Typical ceiling
1¾"/44 mm Min.
Hole in ceiling

Typical ceiling

Finished surface 4"/101 mm Finished surface
2½"/63 mm
4"/101 mm
2½"/63 mm

3¼"/82 mm 3¼"/82 mm
Sleeve and Skirt, Threaded Sleeve and Skirt, Grooved

V3606, V3608 V3606, V3608

For wet system installation or dry/preaction
systems installed in areas above 40˚F/5˚C

Standard offering includes made-on escutcheon with "A" dimension shown above. Use the "Adjustments for Optional
Interchangeable Escutcheons" table when making optional field adjustments to the standard ordered escutcheon.

Adjustments for Optional Interchangeable Escutcheons

Escutcheon "A" Dimension Adjustment

Plain Barrel A=A
Flush A=-¼"/6mm
A=+¼"/6mm
Recessed A=-1 3/8"/35mm
Slv/Skrt

45.01 15896 Rev B Updated 06/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 4

victaulic.com 1" IGS tting

4.0  DIMENSIONS (CONTINUED)

Tee with same outlet size
as sprinkler thread size.
See “Important Installation
Information”, later in this

document.

A 1" NPT/BSPT A 1½"/38 mm Min.
(1¾"/ (2 ⁄ "/ Hole in ceiling
44 mm Min.) 1½"/38 mm Min. 75 mm Min.)
Hole in ceiling Typical ceiling
¼"/ Typical ceiling ¼"/
6 mm 6 mm

2"/ Finished surface 2"/ Finished surface
51 mm 51 mm
3"/76 mm
Flush, Threaded 3"/76 mm
V3606, V3608 Flush, Grooved
V3606, V3608

For wet system installation or dry/preaction
systems installed in areas above 40˚F/5˚C

Tee with same outlet size 1" IGS tting
as sprinkler thread size.
See “Important Installation A
Information”, later in this (2 ⁄ "/
74 mm Min.)
document.
1" NPT/BSPT ¼"/
6 mm
A 2"/
(2"/ 51 mm
51 mm Min.)
3"/76 mm
¼"/ Intermediate, Grooved
6 mm
V3606, V3608
2"/ For wet system installation or dry/preaction
51 mm systems installed in areas above 40˚F/5˚C

3"/76 mm

Intermediate, Threaded
V3606, V3608

Standard offering includes made-on escutcheon with "A" dimension shown above. Use the "Adjustments for Optional
Interchangeable Escutcheons" table when making optional field adjustments to the standard ordered escutcheon.

Adjustments for Interchangeable Escutcheons

Escutcheon "A" Dimension Adjustment

Plain Barrel A=A
Flush A=-¼"/6mm
A=+¼"/6mm
Recessed A=-1 3/8"/35mm
Slv/Skrt

45.01 15896 Rev B Updated 06/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 5

victaulic.com 1" IGS tting

4.0  DIMENSIONS (CONTINUED)

Tee with same outlet size
as sprinkler thread size.
See “Important Installation
Information”, later in this

document.

1" NPT/BSPT A
(3 ⁄ "/
A 2"/51 mm Min. 87 mm Min.) 2"/51 mm Min.
(2¼"/ Hole in ceiling Hole in ceiling
57 mm Min.)
Typical ceiling Typical ceiling

1 ⁄ "/47 mm Finished surface 1 ⁄ "/47 mm Finished surface
1 ⁄ "/28 mm 1 ⁄ "/28 mm

2 ⁄ "/73 mm 2 ⁄ "/73 mm
Recessed, Threaded Recessed, Grooved

V3606, V3608 V3606, V3608

For wet system installation or dry/preaction
systems installed in areas above 40˚F/5˚C

1 ⁄ "/47 mm 1 ⁄ "/
47 mm
A
(2"/51 mm Min.) 1½"/38 mm Min. 1½"/38 mm Min.
Hole in ceiling Hole in ceiling

Typical ceiling Typical ceiling

Finished surface A Finished surface
(3 ⁄ "/80 mm Min.)
1" NPT/BSPT
1" IGS Fitting
Tee with same outlet size Installed Dimensions, Grooved
as sprinkler thread size.
See “Important Installation V3602, V3604
Information”, later in this
Installed Dimensions, Threaded document.
V3602, V3604

For wet system installation or dry/preaction
systems installed in areas above 40˚F/5˚C

Standard offering includes made-on escutcheon with "A" dimension shown above. Use the "Adjustments for Optional
Interchangeable Escutcheons" table when making optional field adjustments to the standard ordered escutcheon.

Adjustments for Interchangeable Escutcheons

Escutcheon "A" Dimension Adjustment

Plain Barrel A=A
Flush A=-¼"/6mm
A=+¼"/6mm
Recessed A=-1 3/8"/35mm
Slv/Skrt

45.01 15896 Rev B Updated 06/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 6

victaulic.com

4.0  DIMENSIONS (CONTINUED)

Tee with same outlet size A 1" IGS tting
as sprinkler thread size. (2 ⁄ "/
See “Important Installation 67 mm Min.) 2 ⁄ "/60 mm Min.
Information”, later in this Hole in ceiling
5"/128 mm Typical ceiling
document. 3¾"/96 mm
Finished surface
1" NPT/BSPT

A 2 ⁄ "/60 mm Min.
(1½"/ Hole in ceiling
38 mm Min.)
Typical ceiling

Finished surface

5"/128 mm
3¾"/96 mm

3½"/89 mm 3½"/89 mm
Extended
Sleeve and Skirt, Threaded Extended
V3606, V3608 Sleeve and Skirt, Grooved

V3606, V3608
For wet system installation or dry/preaction
systems installed in areas above 40˚F/5˚C

Standard offering includes made-on escutcheon with "A" dimension shown above. Use the "Adjustments for Optional
Interchangeable Escutcheons" table when making optional field adjustments to the standard ordered escutcheon.

Adjustments for Interchangeable Escutcheons

Escutcheon "A" Dimension Adjustment

Plain Barrel A=A
Flush A=-¼"/6mm
A=+¼"/6mm
Recessed A=-1 3/8"/35mm
Slv/Skrt

45.01 15896 Rev B Updated 06/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 7

Victaulic® FireLock™ Series FL-QR/DRY/ST 45.04
Dry, Quick Response
Pendent and Recessed Pendent, K11.2 (16.0)

1.0  PRODUCT DESCRIPTION

QUICK RESPONSE PENDENT DRY SPRINKLERS

SIN V4002

ORIENTATION Pendent

K-FACTOR1 11.2 Imp./16.1 S.I.

CONNECTION 1" NPT/25mm BSPT/1" IGS

MAX. WORKING PRESSURE 175 psi (1200 kPa)

ESCUTCHEON Plain/Flush/Sleeve and Skirt

QUICK RESPONSE RECESSED PENDENT DRY SPRINKLERS

SIN V4002

ORIENTATION PENDENT

K-FACTOR1 11.2 Imp./16.1 S.I.

CONNECTION 1" NPT/25mm BSPT/1" IGS

MAX. WORKING PRESSURE 175 psi (1200 kPa)

ESCUTCHEON Recessed

Factory Hydrostatic Test: 100% @ 500 psi/3447 kPa/34 bar
Min. Operating Pressure: UL: 7 psi/48 kPa/.5 bar
Temperature Rating: See tables in section 2.0

1 For K-Factor when pressure is measured in bar, multiply S.I. units by 10.0.

ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.

victaulic.com © 2021 Victaulic Company. All rights reserved.

45.04 16394 Rev A Updated 03/2021 1

victaulic.com
2.0 CERTIFICATION/LISTINGS

APPROVALS/LISTINGS

SIN V4002 V4002
Nominal K Factor Imperial
11.2 11.2
Nominal K Factor S.I.2 16.1 16.1
Orientation Pendent Pendent
Escutcheon Plain/Flush/Slv & Skt Recessed

cULus Approved Temperature Ratings F°/C°

155°F/68°C 155°F/68°C
175°F/79°C 175°F/79°C
200°F/93°C 200°F/93°C
286°F/141°C 286°F/141°C

2 For K-Factor when pressure is measured in Bar, multiply S.I. units by 10. NFPA

NOTE NFPA 13
• Listings and approval as of printing.
NFPA 13
COMMODITY SELECTION AND DESIGN CRITERIA OVERVIEW FOR MODEL V4002 NFPA 13
Storage Type NFPA 13
NFPA 13
Open Frame (that is, no solid shelves) Single, Double, Multiple-Row, or Portable Rack Storage of Class NFPA 30
I-IV and Group A or B Plastics NFPA 30B

Solid Pile or Palletized Storage of Class I-IV and Group A or B Plastics
Idle Pallet Storage
Rubber Tire Storage

Rolled Paper Storage (Refer to the standard.)
Flammable Liquid Storage (Refer to the standard.)

Aerosol Storage (Refer to the standard.)

45.04 16394 Rev A Updated 03/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 2

victaulic.com Spring seal assembly
Torsion spring
3.0  SPECIFICATIONS – MATERIAL Inlet tting

Deflector: Brass or Stainless Steel Inner tube
Bulb Nominal Diameter: 3.0mm
Split Spacer: Stainless Steel Outer tube
Load Screw: Brass Ori ce insert
Pip Cap: Stainless Steel
Spring Seal Assembly: PTFE coated Beryllium nickel Escutcheon Material Speci cations
V4002
alloy and stainless steel Split spacer
Frame: Brass Pip cap
Inlet Fitting: Brass
Outer Tube: Galvanized steel pipe Bulb
Inner Tube: Stainless Steel Frame
Orifice Insert: Stainless Steel Load screw
Escutcheon/Plate: Stainless steel De ector
Torsion Spring: SST wire
Installation Wrench: Ductile iron Spring seal assembly
Sprinkler Frame Finishes: Torsion spring
• Plain brass Inlet tting
• Chrome plated
• White polyester painted3, 4 Inner tube
• Bright White polyester painted3, 4
• Flat black polyester painted3, 4
• Custom polyester painted3, 4
• VC-2505

3 Not available on the Intermediate Level Style Pendent.
4 UL Listed for corrosion resistance.
5 UL Listed and FM Approved for corrosion resistance.

NOTE
• Weather resistant escutcheon available upon request.
• For cabinets and other accessories refer to separate sheet.

Outer tube
Ori ce insert

Escutcheon Material Speci cations
V4002
Split spacer
Pip cap

Bulb
Frame
Load screw
De ector

45.04 16394 Rev A Updated 03/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 3

victaulic.com
4.0 DIMENSIONS

Tee with same outlet size 1" Weld outlet. See
as sprinkler thread size. “Important Installation
See “Important Installation
Information”, later in this Information” within
this document.
document.
A
1" NPT/BSPT

A

1¾"/ 1¾"/
44 mm 44 mm

Plain Barrel, Threaded Plain Barrel, Grooved
V4002 V4002

Tee with same outlet size 1" Weld outlet. See
as sprinkler thread size. “Important Installation
See “Important Installation
Information”, later in this Information within
this document.
document.
1" NPT/BSPT A

A 1¾"/44 mm Min.
1¾"/44 mm Min. Hole in ceiling
Hole in ceiling
Typical ceiling Typical ceiling

3 ⁄ "/99 mm Finished surface 3 ⁄ "/99 mm Finished surface
2 ⁄ "/58 mm 2 ⁄ "/58 mm

3 ⁄ "/81 mm 3 ⁄ "/81 mm
Sleeve and Skirt, Threaded Sleeve and Skirt, Grooved

V4002 V4002

Dry Sprinkler Take Out Dimensions "A"

Flush Recessed Sleeve & Skirt

Length 1" NPT/1"BSPT IGS Grooved 1"NPT/1"BSPT IGS Grooved 1"NPT/1"BSPT IGS Grooved

inches inches inches inches inches inches inches
mm mm mm mm mm mm mm

12 12.00 13.14 12.50 13.64 10.98 12.03
300 304.8 333.8 317.5 364.4 276.6 305.6
18 18.00 19.14 18.50 19.64 16.89 18.03
450 457.2 486.1 469.9 498.8 429.0 458.0
24 24.00 25.14 24.50 25.64 22.89 24.03
600 609.6 613.2 622.3 651.3 518.4 610.4
30
750 30.00 31.14 30.50 31.64 28.89 30.03
36 762.0 791.0 774.7 803.7 733.8 762.8
900 36.00 37.14 36.50 37.64 34.89 36.03
914.4 943.4 927.1 956.1 866.2 915.2

NOTE
• IGS "A" dimensions are measured to the end of the pipe.

• All three escutcheon options of the matching finish will be included with each sprinkler (see sprinkler finishes).

45.04 16394 Rev A Updated 03/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 4

victaulic.com
4.0  DIMENSIONS (CONTINUED)

Tee with same outlet size 1" Weld outlet
as sprinkler thread size. See “Important Installation
See “Important Installation
Information”, within this Information” within this
document
document

1" NPT/BSPT

A 1½"/38 mm Min. A 1½"/38 mm Min.
Hole in ceiling Hole in ceiling
¼"/
6 mm Typical ceiling ¼"/ Typical
6 mm ceiling

2"/ Finished surface 2"/ Finished
51 mm 51 mm surface

3"/ 3"/
76 mm 76 mm

Flush, Threaded Flush, Grooved
V4002 V4002

Tee with same outlet size 1" Weld Outlet. See
as sprinkler thread size. “Important Installation
See “Important Installation
Information”, later in this Instructions within
this document.
document.

1" NPT/BSPT

A A
2"/51 mm Min.
Hole in ceiling 2"/51 mm Min.
Hole in ceiling
Typical ceiling Typical ceiling

1 ⁄ "/48 mm Finished surface 1 ⁄ "/48 mm ⁄ "/ Finished surface
1 ⁄ "/28 mm 1 ⁄ "/28 mm 3 mm
2 ⁄ "/73 mm
Recessed, Threaded 2 ⁄ "/73 mm

V4002 Recessed, Grooved
V4002

Dry Sprinkler Take Out Dimensions "A"

Flush Recessed Sleeve & Skirt

Length 1" NPT/1"BSPT IGS Grooved 1"NPT/1"BSPT IGS Grooved 1"NPT/1"BSPT IGS Grooved

inches inches inches inches inches inches inches
mm mm mm mm mm mm mm

12 12.00 13.14 12.50 13.64 10.98 12.03
300 304.8 333.8 317.5 364.4 276.6 305.6
18 18.00 19.14 18.50 19.64 16.89 18.03
450 457.2 486.1 469.9 498.8 429.0 458.0
24 24.00 25.14 24.50 25.64
600 609.6 613.2 622.3 651.3 22.89 24.03
30 30.00 31.14 30.50 31.64 518.4 610.4
750 762.0 791.0 774.7 803.7 28.89 30.03
36 36.00 37.14 36.50 37.64 733.8 762.8
900 914.4 943.4 927.1 956.1
34.89 36.03
866.2 915.2

NOTE
• IGS "A" dimensions are measured to the end of the pipe.

• All three escutcheon options of the matching finish will be included with each sprinkler (see sprinkler finishes).

45.04 16394 Rev A Updated 03/2021 © 2021 Victaulic Company. All rights reserved.

victaulic.com 5