SILIBUS TERBARU

BAHAGIAN KEMAHIRAN
DAN TEKNIKAL

PROGRAMME SYLLABUS

CERTIFICATE IN AUTOMOTIVE
BODY REPAIR TECHNOLOGY

Edition 3.1

( January 2020 )

PROGRAMME SYLLABUS
CERTIFICATE IN AUTOMOTIVE BODY REPAIR TECHNOLOGY

Edition 3.1
(January 2020)
_______________________________________________________________
Bahagian Kemahiran Dan Teknikal MARA
Level 20 & 21, MARA Headquaters,
Jalan MARA,
50609, Kuala Lumpur

PROGRAMME SYLLABUS
___________________________________________________________

© Bahagian Kemahiran DanTeknikal, 2020

All rights reserved. No part of this publication may be reproduced or transmitted in any
form or by any means, electronic or mechanical including photocopying, recording or
any information storage and retrieval system, without PRIOR permission in writing
from Bahagian Kemahiran Dan Teknikal, MARA.

This Programme Syllabus is an official document published by Bahagian Kemahiran Dan
Teknikal. It should be used for Technical and Vocational Education System Bahagian
Kemahiran Dan Teknikal, MARA (TVET MARA) only. This Programme Syllabus can only
be circulated internally and used in the premises of Bahagian Kemahiran Dan Teknikal
(BKT), Kolej Kemahiran Tinggi MARA (KKTM), MARA-Japan Industrial Institute (MJII)
and Institut Kemahiran MARA (IKM). Distribution and usage other than BKT, KKTM,
MJII and IKM shall obtain written approval from the Director of Bahagian Kemahiran
Dan Teknikal.

Published by:
Cawangan Pengajian,
Bahagian Kemahiran Dan Teknikal MARA
Level 20 & 21, Mara Headquarters,
50609, Jalan MARA,
Kuala Lumpur
03 26134620

Certificate in Automotive Body Repair Technology i

SYLLABUS ENDORSEMENT
_________________________________________________________

“It is certified that this programme syllabus has been endorsed by the BKT Senate
and will be implemented for the teaching and learning purposes for Certificate
in Automotive Body Repair Technology programme.”

ENDORSEMENT STAMP

Certificate in Automotive Body Repair Technology ii

CONTENTS Page
i
Copyright ii
Syllabus Endorsement iii
Contents
1
1 Malaysian Qualification Agency Matrix – MQA-P01 2
2 Malaysian Qualification Agency Matrix – MQA-P02 3
3 Malaysian Qualification Agency Matrix – MQA-P03 4
4 Malaysian Qualification Agency Matrix – MQA-P04 5
5 Curriculum Structure
6 Semester 1 Syllabus 9
12
6.1 CVB10013 Automotive Body Welding 16
6.2 CVB10024 Basic Paint Refinishing 19
6.3 CVB10033 Panel Forming And Finishing 22
6.4 CKV10062 Engineering Drawing 25
6.5 AYV10001 Core Ability 1 28
6.6 CUM10032 Mathematics 31
6.7 CUB10012 E-Technopreneur 1 34
6.8 CUE10012 English And Communications 1 37
6.9 CUS10011 Konsep Asas Islam 40

CUN10011 Asas Etika Dan Nilai 42
6.10 CUY10011 Co-Curriculum 1 45
48
7 Semester 2 Syllabus 51
7.1 CBV20044 Basic Vehicle Body Repair 54
7.2 CVB20054 Intermediate Paint Refinishing 57
7.3 CVB20062 Plastic And Fibre Glass Maintenance
7.4 CVB20072 Basic Automotive Chasis Electrical
7.5 AYV20001 Core Ability 2
7.6 CUB21022 E-Technopreneur 2

Certificate in Automotive Body Repair Technology iii

7.7 CUE21022 English And Communications 2 60
7.8 CUS20021 Tasawwur Islam 63
66
CUN20021 Teori Etika Dan Konflik Moral 69
7.9 CUY20011 Co-Curriculum 2
71
8 Semester 3 Syllabus 74
8.1 CVB30084 Intermediate Vehicle Body Repair 77
8.2 CVB30094 Advanced Paint Refinishing 80
8.3 CVB30102 Automotive Body Installation Parts 83
8.4 CVB30113 Custom Painting 88
8.5 CKV10072 Supervisory Skills 92
8.6 AVY30002 Core Ability 3 95
8.7 CUS30031 Peradaban Islam 98
CUN30031 Masalah Dan Isu Moral
8.8 CUA30012 Pengajian Malaysia 101
103
9. Semester 4 Syllabus
9.1 CLT40015 Industrial Training 105
9.2 CLT40015 Industrial Training (Technopreneur) 118
131
10 Malaysian Qualification Agency Matrix – MQA-P05 132
11 Malaysian Qualification Agency Matrix – MQA-P06
12 List of MARA Technical Advisory Committee (M-TAC))
13 List of MARA Technical Committe (M-TEC)

Certificate in Automotive Body Repair Technology iv

MQA-P01,P02,P03 & P04 Matrix

PROGRAMME EDUCATIONAL OBJECTIVES (PEO

Name Of Programme : CERTIFICATE IN AUTOMOTIVE BODY REPAIR TEC

NO PROGRAM EDUCATIONAL OBJECTIVES (PEO)
LO1

After few years of graduating, graduates should be able to:

PEO1 Graduates with adequate knowledge and technical X
PEO2 skills to perform their job tasks in related field and
exhibit life long learner attributes.

Graduates with positive attitudes and ethics who can
work independently or in teams and has the potential
to lead team to fulfill their duties towards the working
culture and community.

PEO3 Graduates who possess entrepreneurial knowledge
and attributes in the related career.

Certificate in Automotive Body Repair Technology 1 LO1 – Knowledge LO5 – Com
LO2 – Practical Skills LO6 – Prob
LO3 – Social Skills & Responsibilities LO7 – Inform
LO4 – Values, Attitudes & Professionalism LO8 – Mana

Certi

MQA-P01

O) AND MQF LEARNING OUTCOMES (LO) MATRIX

CHNOLOGY
MQF LEARNING OUTCOMES (LO)

LO2 LO3 LO4 LO5 LO6 LO7 LO8

X XX

XXX

X

mmunication, Leadership & Team Skills 1
blem Solving & Scientific Skills
mation Management & Lifelong Learning Skills
agerial & Entrepreneurial Skills
ificate in Manufacturing Engineering Technology

PROGRAMME LEARNING OUTCOMES (PLO) AND PRO

Name Of Programme : CERTIFICATE IN AUTOMOTIVE BODY REPAI

NO PROGRAM LEARNING OUTCOMES (PLO)

PLO1 At the end of the programme, graduates should be able to:
PLO2
Apply basic knowledge of mathematics, science and tech
fundamentals to routine procedures and practices in the fi
automotive body repair.

Identify specific automotive body repair problems with res
operation (and maintenance) .

PLO3 Assist in the investigations and design of solutions for spe
automotive body repair technology activities.

Certificate in Automotive Body Repair Technology 2 PLO4 Demonstrate an awareness of societal, health, safety, leg
cultural issues and their consequent responsibilities.

PLO5 Demonstrate communication, independent work and team
as well as potential to lead team.

PLO6 Demonstrate an understanding of ethics, responsibilities a
norms of engineering practices.

PLO7 Demonstrate an awareness of management, business pra
entrepreneurship and sustainable development.

PLO8 Recognize the need for career development and to engag
lifelong learning.

PEO1 : Graduates with adequate knowledge and technical skills to perform their job tasks in relate

PEO2 : Graduates with positive attitudes and ethics who can work independently or in teams and h
towards the working culture and community.

PEO3 : Graduates who possess entrepreneurial knowledge and attributes in the related career.

MQA-P02

OGRAMME EDUCATIONAL OBJECTIVES (PEO) MATRIX

IR TECHNOLOGY

PROGRAMME EDUCATIONAL OBJECTIVES (PEO)

PEO1 PEO2 PEO3

hnical X
ield of

spect to X

ecific X

gal and X

m skills; X

and X

actices, X X

ge in X

ed field and exhibit lifelong learner attributes.
has the potential to lead team to fulfill their duties

PROGRAMME LEARNING OUTCOMES (PLO) A

Name Of Programme : CERTIFICATE IN AUTOMOTIVE BODY REPAIR TECHNOLOGY

NO PROGRAM LEARNING OUTCOMES (PLO) DOMAIN

PLO1 At the end of the programme, graduates should be able to: C
PLO2 C
Apply basic knowledge of mathematics, science and technical P
fundamentals to routine procedures and practices in the field of C, A
automotive body repair. C, A
C, A
Identify specific automotive body repair problems with respect to C, A
operation (and maintenance) . A

PLO3 Assist in the investigations and design of solutions for specific
automotive body repair technology activities.

PLO4 Demonstrate an awareness of societal, health, safety, legal and
cultural issues and their consequent responsibilities.

Certificate in Automotive Body Repair Technology 3 PLO5 Demonstrate communication, independent work and team skills;
as well as potential to lead team.

PLO6 Demonstrate an understanding of ethics, responsibilities and
norms of engineering practices.

PLO7 Demonstrate an awareness of management, business practices,
entrepreneurship and sustainable development.

PLO8 Recognize the need for career development and to engage in
lifelong learning.

LO1 – Knowledge LO5 – Communication, Leadership & Team Skills
LO2 – Practical Skills LO6 – Problem Solving & Scientific Skills
LO3 – Social Skills & Responsibilities LO7 – Information Management & Lifelong Learning Sk
LO4 – Values, Attitudes & Professionalism LO8 – Managerial & Entrepreneurial Skills

MQA-P03

AND MQF LEARNING OUTCOMES (LO) MATRIX

MQF LEARNING OUTCOMES (LO)
N

LO1 LO2 LO3 LO4 LO5 LO6 LO7 LO8

X

X

X

X

X

X

XX

X

Learning Domain:
C - Cognitive
kills P - Psychomotor
A - Affective

MQA-P04

COURSES AND PROGRAMME LEARNING OUTCOMES (PLO) MATRIX

Name Of Programme : CERTIFICATE IN AUTOMOTIVE BODY REPAIR TECHNOLOGY

SEM NO CODE & NAME OF COURSES PROGRAMME LEARNING OUTCOMES (PLO)

PLO1 PLO2 PLO3 PLO4 PLO5 PLO6 PLO7 PLO8

1 CVB10013 Automotive Body Welding AA
2 CVB10024 Basic Paint Refinishing
3 CVB10033 Panel Forming and Finishing A A AA
4 CKV10062 Engineering Drawing
5 AYV10001 Core Ability 1 AAA A
6 CUM10032 Mathematics
1 7 CUB10012 E-Technopreneur 1 AAA A
8 CUE10012 English And Communications 1
9 CUS10011 Konsep Asas Islam AAA

CUN10011 Asas Etika Dan Nilai AA
10 CUY10011 Co-Curriculum 1
1 CVB20044 Basic Vehicle Body Repair A AA
2 CVB20054 Intermediate Paint Refinishing
3 CVB20062 Plastic And Fibre Glass Maintenance AA
4 CVB20072 Basic Automotive Chasis Electrical
2 5 AYV20001 Core Ability 2 AA A
6 CUB21022 E-Technopreneur 2
7 CUE21022 English And Communications 2 AA
8 CUS20021 Tasawwur Islam
AAAA
CUN20021 Teori Etika Dan Konflik Moral
9 CUY20011 Co-Curriculum 2 AA A
1 CVB30084 Intermediate Vehicle Body Repair
2 CVB30094 Advanced Paint Refinishing A AA A
3 CVB30102 Automotive Body Installation Parts
4 CVB30113 Custom Painting AAAA A
3 5 CKV10072 Supervisory Skills
6 AYV30002 Core Ability 3 AA A
7 CUS30031 Peradaban Islam
AAA
CUN30031 Masalah Dan Isu Moral
8 CUA30012 Pengajian Malaysia A AA
4 1 CLT40015 Industrial Training
AA
SUMMARY %
AA AA

AA

AAAA

AA A A

AA AAAA

A AAAA

AA AA

AA A

AAAAA

AA A

AA A

AA

AAAAAAAA

10.20 8.16 13.27 17.35 23.47 15.31 8.16 15.31

Summary of Eeach PLO (%) = (Number of 'A' for each PLO / Total Number of 'A') X 100%

Certificate in Automotive Body Repair Technology 4

Curriculum Structure

INSTITUT KEM
CERTIFICATE IN AUTOMOTIV

SEM NO CODE COURSE CLASSIFICATION CREDIT LECTURE / PR
SEM

1 CVB10013 Automotive Body Welding Discipline Core 3 11
2 CVB10024 Basic Paint Refinishing Discipline Core 4 13
3 CVB10033 Panel Forming And Finishing Discipline Core 3 6
4 CKV10062 Engineering Drawing Common Core 2 12
5 AYV10001 Core Ability 1 Common Core 0 18
6 CUM10032 Mathematics Common Core 2 24
7 CUB10012 E-Technopreneur 1 Common Core 2 12
1 2 36
8 CUE10012 English And Communications 1 Compulsory 18
1 18
CUS10011 Konsep Asas Islam Compulsory 0
9 1
Compulsory
CUN10011 Asas Etika Dan Nilai
10 CUY10011 Co-Curriculum 1

Certificate in Automotive Body Repair Technology 5 Discipline Core Course(s) : 20 150
Common Core Course(s) : 10 30
Compulsory Course(s) : 6 66
% Discipline Core and Common Core Course(s) : 4 54
% Compulsory Course(s) : 80 22
% Theory : 20
% Practical : 28
72

MAHIRAN MARA
VE BODY REPAIR TECHNOLOGY

RACTICAL / TUTORIAL / FACE TO FACE OTHERS / ILT / SEM SLT / SEM HOUR / WEEK EQUIVALENT
SEM CREDIT
SEM SEM HOUR / SEM 12
0 34
97 0 108 0 30 120 6
113 0 126 0 8 160 7
84 0 90 0 22 120 5
60 0 72 0 42 80 4
18 2 44 40 1
00 36 0 39 80 2
0 12 36 5 20.5 80 2
24 0 36 1.5 20.5 80 2
00 18 1.5 0 40
00 18 10
00 30 1
30 0 40
40 2

408 12 570 19 251.5 840 32 21

294 0 324 0 76 400

84 12 162 2 116 280

30 0 84 17 60 160

78

INSTITUT KEM
CERTIFICATE IN AUTOMOTIV

SEM NO CODE COURSE CLASSIFICATION CREDIT LECTURE / PR
SEM

1 CVB20044 Basic Vehicle Body Repair Discipline Core 4 11
2 CVB20054 Intermediate Paint Refinishing Discipline Core 4 9
3 CVB20062 Plastic And Fibre Glass Maintenance Discipline Core 2 6
4 CVB20072 Basic Automotive Chasis Electrical Discipline Core 2 9
5 AYV20001 Core Ability 2 Common Core 0 18
6 CUB21022 E-Technopreneur 2 Common Core 2 12
2 2 36
7 CUE21022 English And Communications 2 Compulsory 18
8 CUS20021 Tasawwur Islam 1 18
Compulsory 0
CUN20021 Teori Etika Dan Konflik Moral 1
9 CUY20011 Co-Curriculum 2 Compulsory

Certificate in Automotive Body Repair Technology 6 TOTAL 18 119
Discipline Core Course(s) : 12 35
Common Core Course(s) : 2 30
Compulsory Course(s) : 4 54
% Discipline Core and Common Core Course(s) : 78 13
% Compulsory Course(s) : 22
% Theory : 21
% Practical : 79

MAHIRAN MARA
VE BODY REPAIR TECHNOLOGY

RACTICAL / TUTORIAL / FACE TO FACE OTHERS / ILT / SEM SLT / SEM HOUR / WEEK EQUIVALENT
SEM CREDIT
SEM SEM HOUR / SEM 9
7 16
133 0 144 0 8 160 8
135 0 144 0 8 160 8
66 0 72 0 22 80 4
63 0 72 0 44 80 4
18 0 38 40 1
00 36 6 20.5 80 2
24 0 36 1.5 20.5 80 2
00 18 1.5 0 40
00 18 10
00 30 1
30 0 40
40 2

451 0 570 24.5 165.5 760 32 19
397 0
24 0 432 7 41 480
30 0
87 54 0 66 120

84 18 59 160

INSTITUT KEM
CERTIFICATE IN AUTOMOTIV

SEM NO CODE COURSE CLASSIFICATION CREDIT LECTURE / PR
SEM

1 CVB30084 Intermediate Vehicle Body Repair Discipline Core 4 11
2 CVB30094 Advanced Paint Refinishing Discipline Core 4 12
3 CVB30102 Automotive Body Installation Parts Discipline Core 2 9
4 CVB30113 Custom Painting Discipline Core 3 8
5 CKV10072 Supervisory Skills Common Core 2 36
3 6 AYV30002 Core Ability 3 Common Core 0 36
18
CUS30031 Peradaban Islam Compulsory 1 18
7 36
Compulsory 2
CUN30031 Masalah Dan Isu Moral
8 CUA30012 Pengajian Malaysia

Certificate in Automotive Body Repair Technology 7 TOTAL 18 166
Discipline Core Course(s) : 13 40
Common Core Course(s) : 2 72
Compulsory Course(s) : 3 54
% Discipline Core and Common Core Course(s) : 83 22
% Compulsory Course(s) : 17
% Theory : 30
% Practical : 70

MAHIRAN MARA
VE BODY REPAIR TECHNOLOGY

RACTICAL / TUTORIAL / FACE TO FACE OTHERS / ILT / SEM SLT / SEM HOUR / WEEK EQUIVALENT
SEM CREDIT
SEM SEM HOUR / SEM 34
0 10
115 0 126 6 8 160 7
132 0 144 0 30 160 8
63 0 72 0 44 80 4
82 0 90 0 44 120 5
36 0 20.5 80 2
00 36 1.5 20.5 80 2
00 18 1.5 42 40
00 18 2
00 36 1
00 40
80 2

392 0 558 9.5 232.5 800 31 20
392 0
432 6 82 520
00
00 72 0 88 160
78
54 4 63 120

INSTITUT KEM
CERTIFICATE IN AUTOMOTIV

SEM NO CODE COURSE CLASSIFICATION CREDIT LECTURE / PR
SEM

1 CLT40015 Industrial Training 50
4
50
Discipline Core Course(s) : 00
Common Core Course(s) : 00
Compulsory Course(s) : 00
Industrial Training : 50
% Discipline Core and Common Core Course(s) : 00
% Compulsory Course(s) : 100
% Theory : 0
% Practical : 100

OVERALL CREDIT LECTURE / PR
SEM
Discipline Core Course(s) :
Certificate in Automotive Body Repair Technology 8 Common Core Course(s) : 35 105
Compulsory Course(s) : 10 168
Industrial Training : 11 162
TOTAL 50
% Core and Common Technical Course(s) : 61 435
% General Course(s) : 74 19
% Theory : 26
% Practical : 24
76
Note :
ILT : Independent Learning Time
SLT : Student Learning Time

MAHIRAN MARA
VE BODY REPAIR TECHNOLOGY

RACTICAL / TUTORIAL / FACE TO FACE OTHERS / ILT / SEM SLT / SEM EQUIVALENT
SEM 0 CREDIT
SEM SEM HOUR
0
200 0 200 200

200 0 200 0 0 200 5

00 0 000

00 0 000

00 0 000

200 0 200 0 0 200

100

RACTICAL / TUTORIAL / FACE TO FACE OTHERS / ILT / SEM SLT / SEM EQUIVALENT
SEM CREDIT
SEM SEM HOUR / SEM 199
13 270
1083 0 1188 2 181 1400 35
108 12 288 38 560 14
60 0 222 0 0 440 11
200 0 200 53 650 200 5
1451 12 1898 2600 65
81

Semester 1

INSTITUT KEMAHIRAN MARA
Certificate in Automotive Body Repair Technology

Course Title AUTOMOTIVE BODY WELDING
CVB10013
Course Code Discipline Core
Certificate
Status
This course is offered to equip students with the practical welding
Level knowledge and skills and to build up the students level of confidence in
presenting ideas in the future.
Lecturer(s)
Semester 1 / Year 1
Rationale for the
inclusion of the Face to Face Others ILT SLT
course in the (Hours) (Hours) (Hours) (Hours)
programme
Semester and LT P
Year Offered
Total Student 11 0 97 0 12 120
Learning Time 3
(SLT) None
L = Lecture After completing this course, students should be able to:
T = Tutorial
P = Practical
O = Others

Credit Value

Prerequisite
(if any)

Learning 1. Identify various types of engineering tools for fitting works.
Outcomes 2. Identify and select appropriate welding equipment for welding

Transferable Skills process.
3. Perform fitting and welding works according to job sheets
Teaching-learning
and assessment requirement.
strategy Basic Automotive Workshop Work
Machine Handling Skills
Practical Skills

Teaching-learning strategy :
Teaching and learning will be via face to face, collaborative learning,
work-based learning and experiential methods. Students will also be
required to do their own self-study.

Assessment strategy :
Assessment will be both formative and summative. Students learning
will be assessed using theory test and individual practical test.

Mode of Delivery Lecture and Demonstration.

Synopsis This course will cover the theory and practice of safety in workshop, use
of bench work tools and equipment, maintenance tools, instruments and
equipment, interpret reading tolerance, good housekeeping and perform
bench fitting work.

Certificate in Automotive Body Repair Technology 9

Course Work (100%)

Assessment T1(T) : Theory Test 20% A1(P) : Project 30%
Scheme A2(T) : Practical Test 20%
A3(T) : Practical Test 30%
Grading Scheme
Pass – 60 marks and above
Mapping of the Fail – Other than the above
course to the
Programme Aims As attached (MQA-P06)
Mapping of the
course to the As attached (MQA-P05)
Programme
Learning
Outcomes

Unit Title Hours
Content Lecture Tutorial Practical ILT
General Safety Rules And
1.0 Regulations 1 0 21

2.0 1.1. Personal safety 2 0 10 2
1.2. Tools and equipment
3.0 1.3. Working area 1 0 21

Cutting Tools, Applications And
Maintenance
2.1. Hacksaw & pneumatic tools
2.2. Files
2.3. Chisels
2.4. Twist drill
2.5. Tap and dies
2.6. Snips

Hand Tools

3.1. Hammers and mallet
3.2. Screw drivers
3.3. Wrenches / spanners
3.4. Allen / Torx Hex key

Marking and Measuring Tools 2 0 10 2
4.1. Center and pin punch

4.2. Numbers/letter punch
4.3. Scriber

4.4. Steel ruler
4.5. Measuring tape
4.0 4.6. Squares
4.7. Callipers
4.8. Combination set

4.9. Drill gauge
4.10. Thread pitch gauge
4.11. Thickness gauge

4.12. Vernier calliper

Certificate in Automotive Body Repair Technology 10

Clamping Devices 1 0 61
5.1. Bench vice

5.0 5.2. Clamps
5.3. Bolt and nuts

5.4. Rivets

Auto Body Welding

6.1. Welding Safety and Procedures

6.0 6.2. Oxy – Acetylene Welding 3 0 54 4
6.3. MIG Welding

6.4. Arc Welding

6.5. Resistant Spot Welding

Assessment Sub Total Hours 10 0 84 11
Test 1 1 0 01
During 0
Teaching Practical Test 1 & 2 11 0 13 0
& Learning
Total Hours 0 0 97
Hours

Others

Assessment Final Practical 00 0
Outside 12
0
Teaching & 120
Learning 3
Hours

Total Hours

Total Student Learning Time (SLT)

Credit Hours (SLT/40)

Main 1. Module TAB 1034, 2012, Basic Fitting And Oxy-Acetylene Welding

References 2. Burris, Jeffus, 2011, Welding and Metal Fabrication, Cengage Learning

Additional 1. William A. Bowdtich. 2012. Modern Welding, 11th Edition. Goodheart
References Wilcox Inc, ISBN: 978-1-60525-795-2

Other
Additional
Information

Certificate in Automotive Body Repair Technology 11

INSTITUT KEMAHIRAN MARA
Certificate in Automotive Body Repair Technology

Course Title BASIC PAINT REFINISHING
CVB10024
Course Code Discipline Core
Certificate
Status
This course is offered to equip students with the practical skill in paint
Level refinishing basic knowledge and skills as a preparation to become a
competent painter.
Lecturer(s)
Semester 1 / Year 1
Rationale for
the inclusion of Face to Face Others ILT SLT
the course in (Hours) (Hours) (Hours) (Hours)
the programme
LT P 160
Semester and
Year Offered 13 0 113 0 34
Total Student
Learning Time 4
(SLT)
L = Lecture None
T = Tutorial After completing this course, students should be able to :
P = Practical
O = Others

Credit Value

Prerequisite
(if any)

Learning 1. Describe briefly surface preparation tools and material for sanding
Outcomes panel to bare metal.

Transferable 2. Identify painting surface and use spraying material according
Skills painting manual.

Teaching- 3. Select the proper spraying equipment and check its function in good
learning and condition.
assessment
strategy 4. Perform the correct technique of spraying according to spraying
manual.
Mode of
Delivery Basic Spraying Technique and Machine Handling Skills
Practical Skills
Synopsis Teaching-learning strategy:
Teaching and learning will be via face to face, collaborative learning,
work-based learning and experiential methods. Students will also be
required to do their own self-study.

Assessment strategy :
Assessment will be both formative and summative. Students learning will
be assessed using theory test and individual practical test.

Lecture and Demonstration

This course was design to introduce the student to basic auto paint
surface preparation application on surface primer and top coat (2k color)
and also the selection of painting tools and materials.

Certificate in Automotive Body Repair Technology 12

Course Work (100%)

Assessment T1(T) : Theory Test 20% A1(P) : Project 20%
Scheme A2(T) : Practical Test 30%
A3(T) : Practical Test 30%
Grading
Scheme Pass – 60 marks and above
Fail – Other than the above
Mapping of the
course to the As attached (MQA-P06)
Programme
Aims As attached (MQA-P05)
Mapping of the
course to the
Programme
Learning
Outcomes

Unit Content Title Hours
Lecture Tutorial Practical ILT

Safety and Attitude 1 0 22
1.1. PPE (personal protective

1.0 equipment)
1.2. Safety

1.3. Training hardware

Type and Use of Surface

Preparation Equipment and

Tools

2.1. Types, function and use of

2.0 disc sanders 1 0 16 3
2.2. Body scraper

2.3. Putty knife

2.4. Rubber block and rubber

squeegee

2.5. Abrasive holder

Surface Preparation Materials

3.1. Paint remover

3.2. Paint brush

3.0 3.3. Abrasive disc 2 0 28 8

3.4. Abrasive paper

3.5. Polyester putty

3.6. Nitrocellulose putty

Sanding Method 1 0 14 3

4.0 4.1. Hand and machine sanding
4.2. Dry and wet sanding

Certificate in Automotive Body Repair Technology 13

Types And Use Of Spraying

Equipment And Tools

5.1. Types, system, maintenance

and operation of spray booth

5.2. Types, system, maintenance

and operation of air

compressor and air drier

5.3. Types and function of air

5.0 transformer and air regulator 3 0 10 2
0 14 3
5.4. Types, system, maintenance 0 21 6

and operation of spray gun

5.5. Paint stirrer and paint paddle

with scale and measuring jug

5.6. Types and function of

viscosity cup and stop watch

5.7. Air duster

5.8. Infra-red/UV heater

Painting Surface And Spraying

Materials

6.1 Degreasing

6.2 Masking materials

6.0 6.3 Wiping solvent 2
6.4 Tack rag

6.5 Paint strainer

6.6 Thinner

6.7 Primer

6.8 Top coat

6.9 Anti-fish eyes

Spraying Techniques

7.1 Overlap

7.2 Stroke

7.3 Distance

7.0 7.4 Corner 2
7.5 Flat

7.6 Vertical

7.7 Curve

Assessment Sub Total Hours 12 0 105 27
Test 1 1 0 01
During
Teaching Practical Test 1 & 2 0 0 86
& Learning
Total Hours 13 0 113
Hours

Others

Certificate in Automotive Body Repair Technology 14

Assessment

Outside

Teaching & 0 0 00

Learning

Hours

Total Hours 0 34

Total Student Learning Time (SLT) 160

Credit Hours (SLT/40) 4

1. Module TAB 1013, 2012, Basic Paint Refinishing

Main 2. Bill Toboldt,1982, Autobody Repairing and Repainting, The Goodheart
References 3. Doroche & Hilderbrand,1976, Principles of Auto Repairing and

Refinishing, Prentice-Hall

Additional 1. Robert Scharff& Richard J. Paquette, 1990, Complete Automotive
References Painting, Delmar Publisher

Other
Additional
Information

Certificate in Automotive Body Repair Technology 15

INSTITUT KEMAHIRAN MARA
Certificate in Automotive Body Repair Technology

Course Title PANEL FORMING AND FINISHING
CVB10033
Course Code Discipline Core
Certificate
Status
This course is offered to equip students with the knowledge and skills
Level as a preparation to become a basis panel beater.

Lecturer(s) Semester 1 / Year 1

Rationale for the Face to Face Others ILT SLT
inclusion of the (Hours) (Hours) (Hours) (Hours)
course in the
programme LT P

Semester and 60 84 0 30 120
Year Offered
Total Student 3
Learning Time
(SLT) None
L = Lecture After completing this course, students should be able to :
T = Tutorial
P = Practical
O = Others

Credit Value

Prerequisite
(if any)

Learning 1. Identify, select and use the appropriate tools for panel forming
Outcomes works.

Transferable 2. Practice the correct metal finish process to vehicle body panel
Skills according to job sheets requirement.

Teaching- 3. Perform repair a damage panel to a proper straightening techniques.
learning and
assessment Basic Mechanical Workshop Work
strategy Machine Handling Skills
Practical Skills
Mode of Delivery
Teaching-learning strategy :
Teaching and learning will be via face to face, collaborative learning,
work-based learning and experiential methods. Students will also be
required to do their own self-study.

Assessment strategy :
Assessment will be both formative and summative. Students learning
will be assessed using theory test and individual practical test.

Lecture and Demonstration

Certificate in Automotive Body Repair Technology 16

Synopsis This course is to Introduce the basic theory and practical of metal
forming by striking, stretching, filing, contouring and leading. Stress the
Assessment usage of basic tooling in body and panel repair such as hammer, dolly,
Scheme spoon and power tools includes direct hammering techniques.
Emphasize to safety and care.

Course Work (100%) 20% A1(P) : Project 20%
T1(T) : Theory Test A2(T) : Practical Test 30%
A3(T) : Practical Test 30%

Grading Scheme Pass – 60 marks and above
Fail – Other than the above

Mapping of the As attached (MQA-P06)
course to the As attached (MQA-P05)
Programme Aims

Mapping of the
course to the
Programme
Learning
Outcomes

Unit Title Hours
Content Lecture Tutorial Practical ILT

1.0 Safety and Attitude

1.1 Personal protective equipment

(PPE) 1 0 24

1.2 Training hardware include mild

steel metal, tools and equipment

Hammer and dolly technique 2 0 38 5
2.1 Select tools for panel forming

2.0 2.2 Repair technique such as :-
2.2.1 Hammer On Dolly

2.2.2 Hammer Off Dolly

Metal Finish and Panel Forming. 2 0 35 15
3.1 Thickness of panel 5 0 75 24
3.0 3.2 Direct and indirect hammering
3.3 Type of panel forming template
3.4 Panel checking technique

Sub Total Hours

Certificate in Automotive Body Repair Technology 17

Assessment Test 1 1 0 02
During Practical Test 1 & 2 0 0 94

Teaching
& Learning
Hours

Total Hours 6 0 84

Others

Assessment 0 0 00

Outside
Teaching &

Learning
Hours

Total Hours 0 30

Total Student Learning Time (SLT) 120

Credit Hours (SLT/40) 3

Main 1. Module TAB 1023, 2012, Panel Forming and Finishing
References 2. A. Dickson, The Geometry of Sheet Metal Work, Pitman Publishing,

1987
3. Lindsay Porter, 1995, Principles of Auto body Repairing and Finishing,

Prentice Hall

Additional 1. K.R Lindey, 1970, Fundamental of Auto Body Repair, Pitman
References

Other
Additional
Information

Certificate in Automotive Body Repair Technology 18

INSTITUT KEMAHIRAN MARA
Certificate in Automotive Body Repair Technology

Course Title ENGINEERING DRAWING

Course Code CKV10062

Status Common Core

Level Certificate

Lecturer(s) This course is to equip students with the engineering drawing knowledge and skills using
basic tools of 2D Auto-CAD
Rationale for
the inclusion of Semester 1 / Year 1
the course in
the programme Face to Face Others ILT SLT
(Hours) (Hours) (Hours) (Hours)
Semester and
Year Offered LT P

Total Student 12 0 60 0 8 80
Learning Time, 2
SLT

L = Lecture
T = Tutorial
P = Practical

Credit Value

Pre-requisite (if None
any) After completing this course, the students should be able to:

Learning 1. Practice engineering drawing using basic tools of 2D Auto-CAD.
Outcome 2. Create engineering drawing of an objects according to drawing standard.
3. Produce and interpret production drawing according to drawing standard as
Transferable
Skills specification.

Teaching- Computer or ICT Skills, Computer Drafting Skills, Report Writing, Verbal Presentation,
Learning and Technical Drawing, Drafting
Assessment
Strategy Teaching-learning strategy
Face to Face, Cooperative/Collaborative Learning, Active Learning and experiential
Synopsis methods.

Mode of Assessment strategy:
Delivery Assessment will be summative. Students learning will be assessed using oral
Assessment presentation, group assignment and individual practical test. Peer evaluation will be part
Scheme of the assessment of a teamwork.
Grading
Scheme This course is introduced the students on fundamental background in engineering
drawing to student using AutoCAD Software, which will enable them to work more
effectively in various field of engineering.

Lecture, Demonstrate A1 (T): Practical Test 40%
Course Work (100%)
A2 : Practical 30%
Pass – 60 marks and above
Fail – Other than the above A3 (P): Practical Project 30%

Certificate in Automotive Body Repair Technology 19

Mapping of the As attached (MQA-P06)
course to the As attached (MQA-P05)
Programme
Aims

Mapping of the
course to the
Programme
Learning
Outcomes

Unit Content Title Hours ILT
1 Lecture Tutorial Practical 1
2 INTRODUCTION TO TECHNICAL DRAWING 0
3 1.1 Function and purpose of technical 20 0 0
4 0.5
5 drawing 00 1 0.5
6 1.2 Representation of technical drawing 0.5
7 1.3 Drawing apparatus and their application 00 1 0.5
1.4 Standard drawing paper and scales 10 1
8 1.5
LINE GROUP AND LINE THICKNESS 10 6
2.1 Line type
2.2 Line scale
2.3 Application of line thickness and type of

line

STANDARD LETTERING
3.1 Standardized lettering sizes and spaces
3.2 Text format
3.3 Text editing and modify

STANDARD DIMENSIONING
4.1 Fundamentals of dimensioning
4.2 Dimensioning format

GEOMETRICAL CONSTRUCTION
5.1 Lines
5.2 Circles and arc
5.3 Polylines
5.4 Polygons
5.5 Modify geometrical construction

ORTHOGRAPHIC DRAWING 10 6
6.1 First Angle view

6.2 Third Angle View

6.3 Sectioning

ISOMETRIC DRAWING 10 6
7.1 Isometric projection 30 3
7.2 Construction of ellipse
7.3 Constructing isometric dimensioning

INTRODUCTION TO TOLERANCE, FITS
AND LIMITS
8.1 Basic terms
8.2 Types and system of fits
8.3 Application to fit system
8.4 Tolerance system
8.5 Geometrical tolerance

Certificate in Automotive Body Repair Technology 20

PRODUCTION DRAWING 30 5 1.5
9.1 List of symbols in production drawing
12 0 30 6
9 9.2 Standard Parts & Connection 00 30
9.3 Assembly and detail 00 15 0
00 12 2
9.4 Bill Of Materials 12 0 60

Assessment Sub Total Hours
During Practical Test
Teaching & Practical
Learning Hours Practical Project

Total Hours

Others

Assessment Revision Week 00 00
Outside Total Hours
Teaching &
Learning Hours

00 08

Total Student Learning Hours (SLT) 80

Credit Hours (SLT/40) 2

Main References 1. S.Tickoo’s (2009) AutoCAD 2010, Autodesk Press (ISBN:0003VGKXTS).
Additional 2. Kalamaja, A.J, Delmor (2012), “AutoCAD 2012 Tutor for Engineering Graphics
References
(ISBN:11116485222).
Other Additional
Information 1. Mohd Razman, (1989), Lukisan Kejuruteraan (Asas), Unit Penerbitan UTM,
2. Khairul Anwar Hanafiah, Lukisan Kejuruteraan Berbantu Komputer, Unit

Penerbitan (UTM)

List Of Practical:
1. Practical: Line group and line thickness,
2. Practical: Standard Lettering,
3. Practical: Standard Dimensioning,
4. Practical: Geometrical Construction,
5. Practical: Orthographic drawing,
6. Practical: Isometric Drawing,
7. Practical: Introduction to tolerance, fits and limits,
8. Practical: Production Drawing,

Certificate in Automotive Body Repair Technology 21

INSTITUT KEMAHIRAN MARA

Certificate in Automotive Body Repair Technology

Course Title CORE ABILITIES 1
Course Code AYV10001
Classification Common Core
Level Diploma

Synopsis This course is to expose students with Basic Working Communication, Personal
Behaviour Skill, Work Ethics Awareness and Health, Safety and Environmental
Awareness at work place.

Name(s) of Semester 1 / Year 1
Academic 1
Staff

Semester and
Year Offered

Credit Value
Pre-requisite
(if any)

After completing this course, the students should be able to:

Course CLO 1: Explain the common concept of Basic Working Communication, Personal
Learning CLO 2: Behaviour Skill, Work Ethics Awareness and Health, Safety and
Outcomes Environmental Awareness at work place. (PLO4, A3)
(CLO)
Communicate effectively with others and work effectively with them to
achieve common objectives. (PLO5, A3)

CLO 3: Develop safety and health awareness at work place that has been
identified and work collaboratively as a team in an assigned project within
stipulated time frame (PLO6, A3)

Certificate in Automotive Body Repair Technology 22

CLO Learning Outcome Teaching & FTF + Assessment Weightage (%)
Domain Learning NFTF Method
Methods (Hours)

Teaching & 1 Communication Lecture 4 4 Knowledge & 25%
Learning And skills Performance
Assessment
Strategy Social skills, Lecture 6 5 Knowledge & 25%
2 teamwork and Lecture Performance 50%

responsibility 8 5 Knowledge &
Performance
Values, ethics,
3 moral and

professionalism

Transferable Critical thinking and scientific skills
Skills
Pass – 60 marks and above
Grading Fail – Other than the above
Scheme

P P PP

E E EE

Mapping of CLO P O P P O P O O Teaching & Assessment
the Course L 1 L L 2 L 3 2 Learning Methods
Learning Methods
Outcomes P P PP P
(CLO) to the L L LL L
Program
Educational O O O O OOOO O
Objectives
(PEO) and 1 2 3 4 5678 9
Program
Learning CLO1 √ Lecture Knowledge &
Outcomes Performance
(PLO)
CLO2 √ Lecture Knowledge &
Performance

CLO3 √ Lecture Knowledge &
Performance

Unit Content FTF (Hours) NFTF (Hours) SLT
LTP L T P
BASIC WORKING COMMUNICATION
40 0 4 0 0 8
1 1.1 Apply working language appropriately
1.2 Apply oral communication and speak
reasonably
1.3 Understand reading material

Certificate in Automotive Body Repair Technology 23

PERSONAL BEHAVIOUR SKILL 60 0 5 0 0 11

2 2.1 Demonstrate honesty and intergrity 4
2.2 Adopt work punctuality
2.3 Demonstrate team cooperation 9

WORKPLACE ETHICS AWARENESS 30 0 1 0 0 32
0
3 4
3.1 Respond to instructions 2
3.2 Demonstrate discipline at workplace 2
0
HEALTH, SAFETY AND EVINRONMENTAL 0
AWARENESS 8

4 4.1 Adhere to health awareness activity 50 0 4 0 0
4.2 Adhere to safety awareness activity
4.3 Adhere to environmental awareness
activity

Sub Total Hours 18 0 0 14 0 0
Others (O)
Continuous Assignment
Assessment Knowledge 00 0 0 0 0
Performance 00 0 4 0 0
00 0 2 0 0
Final 00 0 2 0 0
Assessment 00 0 0 0 0
00 0 0 0 0
Sub Total Hours 00 0 8 0 0
Total Student Learning Hours (SLT)
Credit Hours (SLT/40) 40
1

Special None
Requirements

Main 1. National Compentency Standard Core Abilities Level 1 ( Z - 009 - 01 - 2015)
References

Additional 1. Daftar NOSS
References

Other Written Instruction Material (WIM) Level 1
Additional
Information

Certificate in Automotive Body Repair Technology 24

INSTITUT KEMAHIRAN MARA

Certificate in Automotive Body Repair Technology

Course Title MATHEMATICS
CUM10032
Course Code Common Core
Certificate
Status
This course is offered to impart to students the necessary mathematical
Level knowledge, skills and understanding, and also to equip students with the basis to
apply mathematical concepts in daily activities and relevant trades.
Lecturer(s)
Rationale for Sem 1 / Yr 1
the inclusion of
the course in Face to Face Others ILT SLT
the programme (Hours) (Hours) (Hours) (Hours)
Semester and
Year Offered LTP
Total Student
Learning Time 24 12 0 2 42 80
(SLT) 2
None
L = Lecture
T = Tutorial
P = Practical

Credit Value
Prerequisite
(if any)

After completing the course, students should be able to:

Learning 1. Solve arithmetic problems involving numbers of various forms.
Outcomes 2. Convert the unit of measurement systems.
3. Solve algebraic equations using appropriate methods.
4. Compute geometrical measurements of planes and solids.
5. Generate and solve linear graphs.

Transferable Numerical or Analytical Skills, Problem Solving Skills
Skills
Teaching-learning strategy:
Teaching-
learning and Teaching and learning will be via face to face and active learning. Students will
assessment also be required to do their own self-study for certain topics and assignments.
strategy
Assessment strategy:
Mode of
Delivery Assessment will be both formative and summative. Students learning will be
assessed using quizzes, numerical test, group assignment and final examination.
Synopsis
Lecture, Tutorial, Active learning.

This course is meant for students who are pursuing the Certificate in Technology /
Profession programmes offered in Institut Kemahiran MARA. Students are drilled
on techniques and skills to solve problems to enhance their understanding. Thus
providing the necessary mathematical concepts and techniques related to
Arithmetic, Measurements, Algebra, Geometry and Graphs.

Certificate in Automotive Body Repair Technology 25

Assessment Course Work (60%) : 10%
Scheme T1(Q) Quiz : 20%
T2(A) Theory Assignment : 30%
T3(N) Numerical Test
: 40%
Final (40%)
T4(F) Final Theory

Grading Pass – 50 marks and above
Scheme Fail – Other than the above
As attached (MQA-P06)
Mapping of the
course to the As attached (MQA-P05)
Programme
Aims
Mapping of the
course to the
Programme
Learning
Outcomes

Unit Content Title Hours ILT
Lecture Tutorial Practical 10
1.0 Arithmetic
730 4
1.1 Operations of Numbers 4
1.2 Powers and Roots 8
1.3 Fractions
1.4 Decimal Numbers
1.5 Approximation
1.6 Percentages
1.7 Ratios and Proportions

2.0 Measurements

2.1 British or Imperial System 2 2 0
2.2 SI or Metric System

2.3 Measurement System

Conversion

3.0 Algebra

3.1 Operations of Algebraic 3 2 0
Expressions

3.2 Simple Algebraic Equations

4.0 Geometry

4.1 Straight Lines and Angles

4.2 Pythagoras Theorem 4 3 0
4.3 Perimeters and Areas of

Planes

4.4 Surface Areas and

Volumes of Solids

Certificate in Automotive Body Repair Technology 26

5.0 Graphs 220 4

5.1 Cartesian Coordinates
5.2 Linear Graphs
5.3 Graphical Solutions

Sub Total Hours 18 12 0 30
2 00 2
Assessment Numerical Test 4 00 6
24 12 0
During Teaching Theory Assignment 4
& Learning 2 00 42

Hours Total Hours 2
80
Others 2

Assessment Final Theory
Outside Total Hours
Teaching &
LearningHours

Total Student Learning Time (SLT)

Credit Hours (SLT/40)

Main 1. Bahagian Kemahiran Dan Teknikal (2012). Mathematics. First Edition. Malaysia:
References Koperasi IKM JB Bhd, ISBN:9789670541020.

Additional 1. Bahagian Kemahiran Dan Teknikal (2012). Technical Mathematics 1. First
References Edition. Malaysia: Koperasi IKM JB Bhd, ISBN: 9789670541013.

2. Chang Tze Hin, Ong Yoke Mooi, et al (2012). Nexus SPM A+ Additional
Mathematics. Malaysia: Sasbadi Sdn Bhd, ISBN: 9789835957611

3. You Pou Beng, Tee Hock Tien (2012). X-Plor Mathematics PMR. Malaysia: Info-
Didik Sdn Bhd, ISBN: 9789673732616

4. Wong, T. S. (2013). Analysis Series Mathematics SPM. Malaysia: Pelangi,
ISBN: 9789830057941.

5. Chong, P. C. (2013). Analysis Series Additional Mathematics SPM. Malaysia:
Pelangi, ISBN: 9789830057958.

Other Not Applicable
Additional
Information

Certificate in Automotive Body Repair Technology 27

INSTITUT KEMAHIRAN MARA

Certificate in Automotive Body Repair Technology

Course Title E-TECHNOPRENEUR 1
Course Code CUB10012
Status Common Core
Level
Lecturer(s) Certificate
Rationale for
the inclusion With the move towards a developed nation by 2020 and with the increasing
of the course population with limited job opportunities it seems important that the focus should be
in the towards producing entrepreneurs. The rational to include this course in the program
programme is to educate, equip and assist in managing new business entities and contribute
towards high income economy.
Semester and
Year Offered Sem 1 / Sem 2 / Year 1

Total Student Face to Face Others ILT SLT
Learning Time (Hours) (Hours) (Hours) (Hours)
(SLT)
L T P 0 44 80
L = Lecture 24
T = Tutorial 12 0
P = Practical 2
None
Credit Value
Prerequisite
(if any)

Learning After completing the course, students should be able to :
Outcomes
1. Express their mindset towards having a better understanding of the
entrepreneurship’s fundamental.

2. State market segmentation by using survey tools.
3. Explain the principles of marketing for start-up business.
4. Display the costing and revenue plan for the product or service.
5. Construct a comprehensive business plan for start-up business.

Transferable Entrepreneur and Enterprise skills, visual and verbal presentation, analytical and
Skills creativity skills, team work skills and leadership skills.

Teaching- Teaching-learning strategy:
learning and
assessment Teaching and learning will be via face to face, active learning and cooperative /
strategy collaborative learning. Students will also be required to do their own self-study and
research for certain topics, homework, and assignments.
Mode of
Delivery Assessment strategy:
Synopsis
Assessment will be both formative and summative. Students learning will be
assessed in group using practical application, simulation of the business proposal
and projects oriented (business to be able to generate revenue) results. Peer
evaluation will be part of the assessment of a team work.

Lecture, Presentation, Group Discussion and Group Projects.

To give the students an experience on how to select, plan and execute their own
business by applying the skills that are related to their field of studies.

Certificate in Automotive Body Repair Technology 28

Assessment Course Work (100%) A1 Practical 1 : 40%
Scheme A2 Practical 2 : 30%
T1(P) Theory Assignment : 20% A3 Practical 3 : 10%
with presentation

Grading Pass – 50 marks and above
Scheme Fail – Other than the above
As attached (MQA-P06)
Mapping of the
course to the As attached (MQA-P05)
Programme
Aims

Mapping of the
course to the
Programme
Learning
Outcomes

Unit Content Title Hours ILT
Lecture Tutorial Practical 2
1.0 Introduction to Entrepreneurship 2
1.1 Basic business knowledge 200
1.2 Types of business structure 6
1.3 Business Idea Creation 202 6

2.0 Fundamentals of Marketing 200
2.1 Customer needs and wants
2.2 Demand and buying power 402
2.3 Types of market
2.4 Market Segmentation

3.0 Marketing Mix
3.1 Product
3.2 Price
3.3 Place
3.4 Promotion

4.0 Basic Financial Requirement
4.1 Classification of Accounting
4.2 Components of financial
planning

Certificate in Automotive Body Repair Technology 29

5.0 Business Plan 2 0 4 8
5.1 Introduction to business plan
0 8 24
5.2 Components of business plan 0 2 2

Sub Total Hours 12

Theory Assignment with Presentation 0

Assessment Practical 1 006 8
During Practical 2 006 8
Teaching Practical 3 002 2
& Learning
Hours

Total Hours 12 0 24
0
Others 00

Assessment None 0 0
Outside Of 80 44
2.0
Teaching &

Learning Total Hours
Hours

Total Student Learning Time (SLT)

Credit Hours (SLT/40)

Main 1. Wan Nong Muzaffar (2016). Kuasai Formula Perniagaan, Published by Group Buku
References Karangkraf. ISBN : 9789678607278

Additional 1. Sarimah Hanim Aman Shah & Cecilia Soon Teik Lan (2013). Oxford Fajar
References Polytechnic Series Entrepreneurship. Third Edition. Oxford Fajar Sdn. Bhd., ISBN :
789676590527.

2. Philip Kotler (2011). Prinsip Pemasaran Kotler. Kuala Lumpur : PTS Profesional
Publishing Sdn. Bhd., ISBN : 9789675226519.

3. Tengku Akhbar (2008). Simple Guide to Business Planning. Leeds Publications,
ISBN : 9789832431893.

4. Sofian Md Auzair. (2012). Perakaunan dan Kewangan Untuk Bukan Akauntan.
Leeds Publications, ISBN : 9789833794485

Other Not Applicable
Additional
Information

Certificate in Automotive Body Repair Technology 30

INSTITUT KEMAHIRAN MARA

Certificate in Automotive Body Repair Technology

Course Title ENGLISH AND COMMUNICATIONS 1
CUE10012
Course Code Compulsory
Certificate
Status
The course is required to develop learners’ English language proficiency in order
Level to meet their needs for English in academic life.

Lecturer(s) Sem 1 / Yr 1
Rationale for
the inclusion of Face to Face Others ILT SLT
the course in (Hours) (Hours) (Hours) (Hours)
the programme
Semester and LT P
Year Offered 0
Total Student 36 0 5 39 80
Learning Time 2
(SLT) None

L = Lecture
T = Tutorial
P = Practical

Credit Value
Prerequisite
(if any)

After completing the course, students should be able to:

Learning 1. Communicate in various social contexts using appropriate expressions.
Outcomes 2. Describe workshop/studio tools, equipment and signage when dealing with

work at the workshop/studio.
3. Describe machines related to engineering and technology field.

Transferable Visual and verbal presentation skills, communication skills
Skills

Teaching-learning strategy:

Teaching- Teaching and learning will be via face to face and active learning.
learning and
assessment Assessment strategy:
strategy
Assessment will be both formative and summative. Students learning will be
assessed through listening test, presentation, group assignment and final exam.

Mode of Lecture, Presentation and Discussion
Delivery

Synopsis This course is designed to enable learners to acquire the English language
communicative skills in common situations. It also enhances learners’ skills in
describing tools, machinery and safety procedures.

Certificate in Automotive Body Repair Technology 31

Assessment Course Work (60%) : 10%
Scheme T1 (T) Theory Test : 10%
T2 (A) Theory Assignment : 10%
T3 Listening : 30%
T4 Speaking
: 20%
Final Exam (40%) : 20%
T5 (F) Final Theory
T6 (F) Final Presentation

Grading Pass – 50 marks and above
Scheme Fail – Other than the above
As attached (MQA-P06)
Mapping of the
course to the As attached (MQA-P05)
Programme
Aims
Mapping of the
course to the
Programme
Learning
Outcomes

Unit Content Title Hours ILT
Lecture Tutorial Practical 6

Meeting People

1.0 1.1 Knowing me, knowing you 10 0 0
1.2 Meeting friends

1.3 Meeting administrators

1.4 Getting to know your college

A New Environment 11 0 0 5

2.0 2.1 Getting to know your
workshop/studio

2.2 Talking about Safety

Dealing With Machines and 8 0 07
Power Tools
29 0 0 18
3.0 3.1 Exploring Machines 1 0 02
3.2 Describing Processes and 1 0 04
Procedures 1 0 00
3.3 Reporting on Machine 4 0 08
36 0 0
Assessment Sub Total Hours
During Theory Test
Teaching & Theory Assignment
Learning Hours Listening
Speaking

Total Hours

Others

Certificate in Automotive Body Repair Technology 32

Assessment Final Theory 2004
Outside Final Presentation
Teaching & 3003
Learning Hours

Total Hours 5 39
80
Total Student Learning Time (SLT) 2

Credit Hours (SLT/40)

Main 1. Bahagian Kemahiran Dan Teknikal (2012). English And Communications 1
References Module. First Edition. Malaysia: Koperasi IKM JB Bhd, ISBN: 9789670541037

1. Open Resources for English Language Teaching (ORELT) Portal / Module 2 :

Additional Speaking for Better Communication [http://orelt.col.org]
References
2. Leadership Education Development/Presentation Skills

[http://www.hse.ie/eng/staff/]

Other Not Applicable
Additional
Information

Certificate in Automotive Body Repair Technology 33

INSTITUT KEMAHIRAN MARA

Certificate in Automotive Body Repair Technology

Course Title KONSEP ASAS ISLAM
CUS10011
Course Code Wajib
Sijil
Status
Kursus Konsep Asas Islam disediakan kepada para pelajar untuk melahirkan
Level graduan yang memahami konsep asas Islam dengan mengamalkan cara hidup
yang beradab, bersepadu dan seimbang serta mampu mencari penyelesaian
Lecturer(s) terhadap masalah dan cabaran semasa berdasarkan prinsip-prinsip Islam bagi
menjalani kehidupan harian dan memenuhi keperluan kerjaya.
Rationale for
the inclusion of Sem 1 / Thn 1
the course in
the programme Face to Face Others ILT SLT
(Hours) (Hours) (Hours) (Hours)
Semester and
Year Offered LT P
Total Student
Learning Time 18 00 1.5 20.5 40
(SLT) 1
L = Lecture Tiada
T = Tutorial
P = Practical

Credit Value
Prerequisite
(if any)

Di akhir kursus pelajar boleh:

Learning 1. Mengenalpasti ciri-ciri Islam, Iman dan Ihsan yang terkandung dalam
Outcomes kehidupan sebenar muslim.

Transferable 2. Memperincikan konsep-konsep asas Islam dalam mencapai tuntutan
Skills kehidupan peribadi muslim.

3. Menerangkan perkaitan solat dan sains serta kesannya dalam kehidupan.
4. Melaksanakan solat merangkumi aspek bacaan dan praktikal dengan betul.

Menekankan nilai-nilai murni dalam setiap perlakuan untuk membentuk modal
insan yang seimbang dari segi ilmu, kemahiran dan akhlak.

Teaching- Teaching-learning strategy:
Learning and
assessment Pengajaran dan pembelajaran boleh disampaikan dalam bentuk pembelajaran
strategy secara bersemuka dan pembelajaran aktif.

Assessment strategy:

Penilaian dalam bentuk formatif dan sumatif. Pelajar akan dinilai melalui ujian
teori, ujian lisan dan peperiksaan akhir.

Mode of Kuliah dan Perbincangan
Delivery

Certificate in Automotive Body Repair Technology 34