SILIBUS TERBARU

COURSE LEARNING OUTCOMES (CLO) AND PROGR

Name Of Programme : Certificate In Automotive Body Repair Technology
Code & Name Of Course : CVB10013 Automotive Body Welding

NO COURSE LEARNING OUTCOMES (CLO) DOMAIN & PROG
LEVEL P

After completing this course, students should be able to:

CLO1 Identify various types of engineering tools for fitting works. C2

CLO2 Identify and select appropriate welding equipment for C4
welding process

CLO3 Perform fitting and welding works according to job sheets C2,P3,P4,A5
requirement.

SUMMARY

Certificate in Automotive Body Repair Technology 118 Keys: Cognitive Domain (Anderson)
C1 : Remembering
A – Assessed C2 : Understanding
C3 : Applying
C4 : Analysing
C5 : Evaluating
C6 : Creating/Designing

MQA-P06

RAMME EDUCATIONAL OBJECTIVES (PEO) MATRIX

GRAMME EDUCATIONAL OBJECTIVES (PEO) MODE OF DELIVERY ASSESSMENT

PEO1 PEO2 PEO3

A Lecture Theory Test

A Lecture Theory Test

A Lecture, Demonstrate Theory Test, Project,

A and Practical. Practical Test

Psychomotor Domain (Simpson) Affective Domain (Bloom)
P1 : Perception A1 : Receiving
P2 : Set A2 : Responding
P3 : Guided Response A3 : Valuing
P4 : Mechanism A4 : Organization
P5 : Complex Overt Response A5 : Internalization
P6 : Adaptation
P7 : Origination

COURSE LEARNING OUTCOMES (CLO) AND PROGR

Name Of Programme : Certificate In Automotive Body Repair Technology

Code & Name Of Course : CVB10024 Basic Paint Refinishing

NO COURSE LEARNING OUTCOMES (CLO) DOMAIN & PRO
After completing this course, students should be able to: LEVEL

CLO1 Describe briefly surface preparation tools and material for sanding C2
panel to bare metal

CLO2 Identify painting surface and use spraying material according C3,P1,A1
painting manual

CLO3 Select the proper spraying equipment and check its function in C4,P2,A2
good condition.

CLO4 Perform the correct technique of spraying according to spraying C2,P3,A5
manual
Cognitive Domain (Anderso
Certificate in Automotive Body Repair Technology 119 SUMMARY C1 : Remembering
C2 : Understanding
Keys: C3 : Applying
C4 : Analysing
A – Assessed C5 : Evaluating
C6 : Creating/Designing

MQA-P06

RAMME EDUCATIONAL OBJECTIVES (PEO) MATRIX

OGRAMME EDUCATIONAL OBJECTIVES (PEO) MODE OF DELIVERY ASSESSMENT

PEO1 PEO2 PEO3

A Lecture Theory test
A
A Lecture Demonstrate Theory Test
A and Practical
A
Lecture Demonstrate Theory Test, Project,
on)
and Practical Practical Test

Lecture Demonstrate Theory Test, Project,

and Practical Practical Test

Psychomotor Domain (Simpson) Affective Domain (Bloom)
P1 : Perception A1 : Receiving
P2 : Set A2 : Responding
P3 : Guided Response A3 : Valuing
P4 : Mechanism A4 : Organization
P5 : Complex Overt Response A5 : Internalization
P6 : Adaptation
P7 : Origination

COURSE LEARNING OUTCOMES (CLO) AND PROGR

Name Of Programme : Certificate In Automotive Body Repair Technology

Code & Name Of Course : CVB10033 Panel Forming And Finishing

NO COURSE LEARNING OUTCOMES (CLO) DOMAIN & PROGRAM
LEVEL PEO1

After completing this course, students should be able to:

CLO1 Identify, select and use the appropriate tools for panel C3 A
forming works

CLO2 Practice the correct metal finish process to vehicle body C3,P3 A
panel according to job sheet requirement

CLO3 Perform repair a damage panel to proper straightening C3,P3,A3 A
techniques

Certificate in Automotive Body Repair Technology 120 SUMMARY A

Keys: Cognitive Domain (Anderson)
C1 : Remembering
A – Assessed C2 : Understanding
C3 : Applying
C4 : Analysing
C5 : Evaluating
C6 : Creating/Designing

MQA-P06

RAMME EDUCATIONAL OBJECTIVES (PEO) MATRIX

MME EDUCATIONAL OBJECTIVES (PEO) MODE OF DELIVERY ASSESSMENT

PEO2 PEO3

Lecture Theory Test

Lecture, Demonstrate Theory Test, Project,

and Practical Practical Test

Lecture, Demonstrate Theory Test, Project,

and Practical Practical Test

Psychomotor Domain (Simpson) Affective Domain (Bloom)
P1 : Perception A1 : Receiving
P2 : Set A2 : Responding
P3 : Guided Response A3 : Valuing
P4 : Mechanism A4 : Organization
P5 : Complex Overt Response A5 : Internalization
P6 : Adaptation
P7 : Origination

COURSE LEARNING OUTCOMES (CLO) AND PROGR

Name of Programme : Certificate in Engineering Technology / Technology

Code & Name Of Course : CKV10062 ENGINEERING DRAWING

NO COURSE LEARNING OUTCOMES (CLO) DOMAIN PROGRAM
CLO1 & LEVEL PEO1

After completing this course, students should be able to:

Practice engineering drawing using basic tools of 2D C2 , P3 A
AutoCAD

CLO2 Create engineering drawing of an objects according to P4 A
drawing standards

CLO3 Produce and interpret production drawing according P5, A4 A
to drawing standard as specifications

TOTAL A

Certificate in Automotive Body Repair Technology 121 Keys: Cognitive Domain (Anderson)
C1 : Remembering
A – Assessed C2 : Understanding
T - Taught (Without Assessment) C3 : Applying
C4 : Analysing
C5 : Evaluating
C6 : Creating/Designing

MQA-P06

RAMME EDUCATIONAL OBJECTIVES (PEO) MATRIX

MME EDUCATIONAL OBJECTIVES (PEO) MODE OF DELIVERY ASSESSMENT

1 PEO2 PEO3

A Lecture Practical Project
Demostration Practical Test
A
Lecture Practical Project
Psychomotor Domain (Simpson) Demostration Practical Test
P1 : Perception
P2 : Set Lecture Practical Project
P3 : Guided Response Demostration Practical Test
P4 : Mechanism
P5 : Complex Overt Response Affective Domain (Bloom)
P6 : Adaptation A1 : Receiving
P7 : Origination A2 : Responding
A3 : Valuing
A4 : Organization
A5 : Internalization

COURSE LEARNING OUTCOMES (CLO) AND PROGR

Name Of Programme : Certificate In Automotive Body Repair Technology

Code & Name Of Course : CVB20044 Basic Vehicle Body Repair

NO COURSE LEARNING OUTCOMES (CLO) DOMAIN & PROGRA
LEVEL PEO1

After completing this course, students should be able to:

CLO1 Identify car body structure, defaults checking and C1 A
removal body parts according to standard manual.

CLO2 Dismantle, reassemble and align the body part, structure C3,P4 A
wind screen and window glass according to job
specification.

CLO3 Repair and finish a minor damage on metal surface by C4,P3,A5
using welding technique.

SUMMARY A

Certificate in Automotive Body Repair Technology 122 Keys: Cognitive Domain (Anderson)
C1 : Remembering
A – Assessed C2 : Understanding
C3 : Applying
C4 : Analysing
C5 : Evaluating
C6 : Creating/Designing

MQA-P06

RAMME EDUCATIONAL OBJECTIVES (PEO) MATRIX

AMME EDUCATIONAL OBJECTIVES (PEO) MODE OF DELIVERY ASSESSMENT

1 PEO2 PEO3

A Lecture Theory Test

Psychomotor Domain (Simpson) Lecture, Theory Test,
P1 : Perception Demonstrate and Project, Practical
P2 : Set Practical Test
P3 : Guided Response
P4 : Mechanism Lecture, Theory Test,
P5 : Complex Overt Response Demonstrate and Project, Practical
P6 : Adaptation Practical Test
P7 : Origination
Affective Domain (Bloom)
A1 : Receiving
A2 : Responding
A3 : Valuing
A4 : Organization
A5 : Internalization

COURSE LEARNING OUTCOMES (CLO) AND PROGR

Name Of Programme : Certificate In Automotive Body Repair Technology
Code & Name Of Course : CVB20054 Intermediate Paint Refinishing

NO COURSE LEARNING OUTCOMES (CLO) DOMAIN & LEVEL PR
P

After completing this course, students should be able to:

CLO1 Apply the correct methods and techniques of surface C3,P1,A3
preparation process.

CLO2 Perform refinishing procedures and solve types and C3,P4,A5
conditions of substrate and re-spray paint finishing.

CLO3 Select and use the appropriate tools and material, C3,P4,A5
demonstrate a safe manner for a car detailing process.
Cognitive Domain (Anderson)
SUMMARY C1 : Remembering
C2 : Understanding
Certificate in Automotive Body Repair Technology 123 Keys: C3 : Applying
C4 : Analysing
A – Assessed C5 : Evaluating
C6 : Creating/Designing

MQA-P06

RAMME EDUCATIONAL OBJECTIVES (PEO) MATRIX

ROGRAMME EDUCATIONAL OBJECTIVES (PEO) MODE OF ASSESSMENT
DELIVERY
PEO1 PEO2 PEO3

A Lecture, Theory Test,
Demonstrate and Project and KI
A Practical

A Lecture, Theory Test, Project,
Demonstrate and Practical Test
A Practical

Psychomotor Domain (Simpson) Lecture, Theory Test, Project,
P1 : Perception Demonstrate and Practical Test
P2 : Set Practical
P3 : Guided Response
P4 : Mechanism Affective Domain (Bloom)
P5 : Complex Overt Response A1 : Receiving
P6 : Adaptation A2 : Responding
P7 : Origination A3 : Valuing
A4 : Organization
A5 : Internalization

COURSE LEARNING OUTCOMES (CLO) AND PROGR

Name Of Programme : Certificate In Automotive Body Repair Technology
Code & Name Of Course : CVB20062 Plastic And Fibre Glass Maintenance

NO COURSE LEARNING OUTCOMES (CLO) DOMAIN & PROG
LEVEL P

After completing this course, students should be able to: C1,P1,A2

CLO1 Identify and use correct tools and materials for plastic and
fiber glass maintenance.

CLO2 Perform plastic and fiber glass maintenance according to C3,P5,A2
work procedures.

CLO3 Perform paint finishing system on plastic and fibre glass C4,P3,A5
surface according to specification.
Cognitive Domain (Anderson)
SUMMARY C1 : Remembering
C2 : Understanding
Certificate in Automotive Body Repair Technology 124 Keys: C3 : Applying
C4 : Analysing
A – Assessed C5 : Evaluating
C6 : Creating/Designing

MQA-P06

RAMME EDUCATIONAL OBJECTIVES (PEO) MATRIX

GRAMME EDUCATIONAL OBJECTIVES (PEO) MODE OF ASSESSMENT
DELIVERY
PEO1 PEO2 PEO3

Lecture,

A Demonstrate and Theory test

Practical

A Lecture, Theory test, Project,
Demonstrate and Practical Test
Practical

A Lecture, Theory test, Project,
Demonstrate and Practical Test
Practical

AA

Psychomotor Domain (Simpson) Affective Domain (Bloom)
P1 : Perception A1 : Receiving
P2 : Set A2 : Responding
P3 : Guided Response A3 : Valuing
P4 : Mechanism A4 : Organization
P5 : Complex Overt Response A5 : Internalization
P6 : Adaptation
P7 : Origination

COURSE LEARNING OUTCOMES (CLO) AND PROGR

Name Of Programme : Certificate In Automotive Body Repair Technology

Code & Name Of Course : CVB20072 Basic Automotive Chasis Electrical

NO COURSE LEARNING OUTCOMES (CLO) DOMAIN & PROGRA
LEVEL PEO1

After completing this course, students should be able to:

CLO1 Explain basic principle of electrical and magnetism in C2, A2 A
automotive application

CLO2 Explain and construct basic electrical circuit for C2, A2 A
automotive electrical system

CLO3 Carry out troubleshoot of electrical using test instrument P5,A5 A
on automotive electrical system

Certificate in Automotive Body Repair Technology 125 CLO4 Perform proper battery charging and maintenance C1,P3,A5 A
procedures

SUMMARY A

Keys: Cognitive Domain (Anderson)
C1 : Remembering
A – Assessed C2 : Understanding
C3 : Applying
C4 : Analysing
C5 : Evaluating
C6 : Creating/Designing

MQA-P06

RAMME EDUCATIONAL OBJECTIVES (PEO) MATRIX

AMME EDUCATIONAL OBJECTIVES (PEO) MODE OF ASSESSMENT
DELIVERY
1 PEO2 PEO3

Lecture Theory Test

Lecture, Theory Test,
Demonstrate and Project, & Practical
Practical Test

Lecture, Theory Test,
Demonstrate and Project, & Practical
Practical Test

Lecture, Theory Test,
Demonstrate and Project, & Practical
Practical Test

Psychomotor Domain (Simpson) Affective Domain (Bloom)
P1 : Perception A1 : Receiving
P2 : Set A2 : Responding
P3 : Guided Response A3 : Valuing
P4 : Mechanism A4 : Organization
P5 : Complex Overt Response A5 : Internalization
P6 : Adaptation
P7 : Origination

COURSE LEARNING OUTCOMES (CLO) AND PROGR

Name Of Programme : Certificate In Automotive Body Repair Technology

Code & Name Of Course : CVB30084 Intermediate Vehicle Body Repair

NO COURSE LEARNING OUTCOMES (CLO) DOMAIN & PRO
LEVEL

After completing this course, students should be able to:

CLO1 Identify and perform measuring body misalignment, attach C3,P3,A2
anchoring system frame work damage and pulling system
according frame specification manual.

CLO2 Explain vehicle construction & identify type damage C3,P1,A2

CLO3 Dismantle and assemble body parts in according with industry C3,P5
standard
Cognitive Domain (Anderso
Certificate in Automotive Body Repair Technology 126 SUMMARY C1 : Remembering
C2 : Understanding
Keys: C3 : Applying
C4 : Analysing
A – Assessed C5 : Evaluating
C6 : Creating/Designing

MQA-P06

RAMME EDUCATIONAL OBJECTIVES (PEO) MATRIX

OGRAMME EDUCATIONAL OBJECTIVES (PEO) MODE OF DELIVERY ASSESSMENT

PEO1 PEO2 PEO3

A Lecture Demonstrate Theory Test and Project
and Practical

A Lecture Demonstrate Theory Test, Project

and Practical and Practical Test

A Lecture, Demonstrate Theory Test, Project
A
and Practical and Practical Test
on)
Psychomotor Domain (Simpson) Affective Domain (Bloom)
P1 : Perception A1 : Receiving
P2 : Set A2 : Responding
P3 : Guided Response A3 : Valuing
P4 : Mechanism A4 : Organization
P5 : Complex Overt Response A5 : Internalization
P6 : Adaptation
P7 : Origination

COURSE LEARNING OUTCOMES (CLO) AND PROGR

Name Of Programme : Certificate In Automotive Body Repair Technology

Code & Name Of Course : CVB30094 Advanced Paint Refinishing

NO COURSE LEARNING OUTCOMES (CLO) DOMAIN & PROGRAM
LEVEL PEO1

After completing this course, students should be able to:

CLO1 Identify various types of substrate and interpret C2 A
refinishing manuals.

CLO2 Perform complete process panel surface preparation C3,P5,A2 A
and apply paint finish for complex auto body

CLO3 Use paint mixing machine, mix and tint colors to a color C3,P4,A5 A
code.

Certificate in Automotive Body Repair Technology 127 CLO4 Perform the correct process of surface refinishing C5,P3,A5 A
spraying technique according to a job sheet

SUMMARY A

Keys: Cognitive Domain (Anderson)
C1 : Remembering
A – Assessed C2 : Understanding
C3 : Applying
C4 : Analysing
C5 : Evaluating
C6 : Creating/Designing

MQA-P06

RAMME EDUCATIONAL OBJECTIVES (PEO) MATRIX

MME EDUCATIONAL OBJECTIVES (PEO) MODE OF DELIVERY ASSESSMENT

1 PEO2 PEO3

Lecture Theory Test

Lecture, Theory Test, Project and
Demonstrate and Practical Final
Practical
Theory Test, Project and
Lecture, Practical Test
Demonstrate and
Practical Theory Test, Project and
Practical Test
Lecture,
Demonstrate and
Practical

Psychomotor Domain (Simpson) Affective Domain (Bloom)
P1 : Perception A1 : Receiving
P2 : Set A2 : Responding
P3 : Guided Response A3 : Valuing
P4 : Mechanism A4 : Organization
P5 : Complex Overt Response A5 : Internalization
P6 : Adaptation
P7 : Origination

COURSE LEARNING OUTCOMES (CLO) AND PROGR

Name Of Programme : Certificate In Automotive Body Repair Technology

Code & Name Of Course : CVB30102 Automotive Body Installation Parts

NO COURSE LEARNING OUTCOMES (CLO) DOMAIN & PROG
LEVEL PE

After completing this course, students should be able to:

CLO1 Identify components and function in automotive air- C1
conditioning system.

CLO2 Identify the function of car underbody assembly. C4,P1,A4

CLO3 Identify and explain car interior and external parts and C1,P4
trims

CLO4 Remove , inspect and install automotive interior and C4,P5,A5
external parts according to manual.
Certificate in Automotive Body Repair Technology 128 Cognitive Domain (Anderson)
SUMMARY C1 : Remembering
C2 : Understanding
Keys: C3 : Applying
C4 : Analysing
A – Assessed C5 : Evaluating
C6 : Creating/Designing

MQA-P06

RAMME EDUCATIONAL OBJECTIVES (PEO) MATRIX

GRAMME EDUCATIONAL OBJECTIVES (PEO) MODE OF ASSESSMENT
DELIVERY
EO1 PEO2 PEO3

A Lecture Theory Test

A Lecture, Theory Test,
Demonstrate & Project and
A Practical Practical Test

A Lecture, Theory Test,
Demonstrate & Project and
A Practical Practical Test

Psychomotor Domain (Simpson) Lecture, Theory Test,
P1 : Perception Demonstrate & Project and
P2 : Set Practical Practical Test
P3 : Guided Response
P4 : Mechanism Affective Domain (Bloom)
P5 : Complex Overt Response A1 : Receiving
P6 : Adaptation A2 : Responding
P7 : Origination A3 : Valuing
A4 : Organization
A5 : Internalization

COURSE LEARNING OUTCOMES (CLO) AND PROGR

Name Of Programme : Certificate In Automotive Body Repair Technology

Code & Name Of Course : CVB30113 Custom Painting

NO COURSE LEARNING OUTCOMES (CLO) DOMAIN & PROGR
LEVEL PE

After completing this course, students should be able to:

CLO1 Identify types of custom painting used in vehicle body C1 A
painting.

CLO2 Select correct tools and equipment to make custom C3 A
painting works.

CLO3 Perform custom painting technique to apply decoration C2,P3,A5 A
on the body vehicle

SUMMARY A

Certificate in Automotive Body Repair Technology 129 Keys: Cognitive Domain (Anderson)
C1 : Remembering
A – Assessed C2 : Understanding
C3 : Applying
C4 : Analysing
C5 : Evaluating
C6 : Creating/Designing

MQA-P06

RAMME EDUCATIONAL OBJECTIVES (PEO) MATRIX

RAMME EDUCATIONAL OBJECTIVES (PEO) MODE OF ASSESSMENT
DELIVERY
EO1 PEO2 PEO3

A Lecture Theory Test

A Lecture Theory Test,

A Lecture, Theory Test, Project
Demonstrate and and Practical Test
A Practical

) Psychomotor Domain (Simpson) Affective Domain (Bloom)
P1 : Perception A1 : Receiving
P2 : Set A2 : Responding
P3 : Guided Response A3 : Valuing
P4 : Mechanism A4 : Organization
P5 : Complex Overt Response A5 : Internalization
P6 : Adaptation
P7 : Origination

COURSE LEARNING OUTCOMES (CLO) AND PROGR

Name Of Programme : Certificate In Automotive Body Repair Technology
Code & Name Of Course : CKV10072 Supervisory Skills

NO COURSE LEARNING OUTCOMES (CLO) DOMAIN &
LEVEL

CLO1 After completing this course, students should be able to: C3

Identify the roles and functions, delegation and
distribution of effective work, setting the objective of
the supervisor.

CLO2 Apply all sources of communication techniques C3,P3,A2
according to reliable situations

CLO3 Evaluate work’s progress, monitor quality of works, A2, P3
solve any related problems and produce
Certificate in Automotive Body Repair Technology 130 Documentation Cognitive Domain (And
C1 : Remembering
SUMMARY C2 : Understanding
C3 : Applying
Keys: C4 : Analysing
C5 : Evaluating
A – Assessed C6 : Creating/Designin

MQA-P06

RAMME EDUCATIONAL OBJECTIVES (PEO) MATRIX

PROGRAMME EDUCATIONAL MODE OF ASSESSMENT
OBJECTIVES (PEO) DELIVERY

PEO1 PEO2 PEO3

A A Lecture Theory
A Test,Assignment ,
A A Lecture,
A Demonstration Mock Interview
A and Project
derson) Lecture, Theory
Psychomotor Domain (Simpson) Demonstration
ng P1 : Perception Test,Assignment ,
P2 : Set Mock Interview
P3 : Guided Response and Project
P4 : Mechanism Theory
P5 : Complex Overt Response
P6 : Adaptation Test,Assignment ,
P7 : Origination Mock Interview
and Project

Affective Domain (Bloom)
A1 : Receiving
A2 : Responding
A3 : Valuing
A4 : Organization
A5 : Internalization

List of Curriculum Committee

MARA TECHNICAL ADVISORY COMMITTEE (MTAC)

CERTIFICATE IN AUTOMOTIVE BODY REPAIR TECHNOLOGY

___________________________________________________________

1. Tn. Ts Hj. Azmin Bin Ariffin Timbalan Pengarah I BKT
2. En. Shamsul Amir Bin Abdul Rahman Lon-G Autoservice
3. En. Abdul Halim Bin Mutaref CD Car Care
4. En. Hazmi Isnerin Wealthy Service and Repair
5. En. Johardey Bin Abdullah Hardey Wira
6. Tn. Ts. Mohd Irwan Bin Abu Bakar Ketua Jabatan Automotif
IKM Kota Kinabalu
7. En. Mohd Aminuddin Bin Mohd Nor Ketua Program STB IKM TASYA
8. En. Kamarul Azman Bin Ali Pensyarah IKM Kuching
9. En. Md Hafizi Bin Mohamad Pensyarah IKM Kota Kinabalu
10. En. Azhani Bin Arib @ Arif Pensyarah IKM Jasin
11. En. Ezham Haznal Bin Zahariman Penyelaras Program BKT

Certificate in Automotive Body Repair Technology 131

MARA TECHNICAL COMMITTE (MTEC)

CERTIFICATE IN AUTOMOTIVE BODY REPAIR TECHNOLOGY

___________________________________________________________

1. Tn. Ts. Hj. Azmin Bin Ariffin Timbalan Pengarah I BKT
2. En. Ezham Haznal Bin Zahariman Penyelaras Program BKT
3. En. Mohd Aminuddin Bin Mohd Noor Ketua Program STB IKM Tasya
4. En. Zainal Bin Hanifa Ketua Program STB IKM Lumut
5. En. Sohaini Bin Baharum Pensyarah IKM Lumut
6. En. Kamarul Azman Bin Ali Pensyarah IKM Kuching
7. En. Azhani Bin Arib @ Arif Pensyarah IKM Jasin
8. En. Md Hafizi Bin Mohamad Pensyarah IKM Kota Kinabalu

Certificate in Automotive Body Repair Technology 132

© Copyright Reserved
Bahagian Kemahiran Dan Teknikal MARA

Published by:
Cawangan Pengajian
Bahagian Kemahiran dan Teknikal MARA
Tingkat 20 & 21, Ibu Pejabat MARA,

Jalan MARA,
50609 Kuala Lumpur

Tel : 03-26134300
Fax : 03-26914540
www.ekemahiran.edu.my

Detailed Syllabus Majlis Amanah Rakyat
Bahagian Kemahiran Dan Teknikal
JANUARY 2020

CERTIFICATE

IN AUTOMOTIVE
BODY REPAIR TECHNOLOGY

PROGRAMME DETAILED SYLLABUS
CERTIFICATE IN AUTOMOTIVE BODY REPAIR TECHNOLOGY

Edition 3.1
(January 2020)
_______________________________________________________________
Bahagian Kemahiran Dan Teknikal MARA
Level 20 & 21, MARA Headquaters,
Jalan MARA,
50609, Kuala Lumpur

PROGRAMME DETAILED SYLLABUS

© Bahagian Kemahiran Dan Teknikal, 2020

All rights reserved. No part of this publication may be reproduced or transmitted in
any form or by any means, electronic or mechanical including photocopying,
recording or any information storage and retrieval system, without PRIOR permission
in writing from Bahagian Kemahiran Dan Teknikal, MARA .

This Programme Detailed Syllabus is an official document published by Bahagian
Kemahiran Dan Teknikal. It should be used for Technical and Vocational Education
System Bahagian Kemahiran Dan Teknikal, MARA (TVET MARA) only. This
Programme Detailed Syllabus can only be circulated internally and used in the
premises of Bahagian Kemahiran Dan Teknikal (BKT), Kolej Kemahiran Tinggi
MARA (KKTM), MARA-Japan Industrial Institute (MJII) and Institut Kemahiran MARA
(IKM). Distribution and usage other than BKT, KKTM, MJII and IKM shall obtain
written approval from the Director of Bahagian Kemahiran Dan Teknikal.

Published by:

Cawangan Pengajian,
Bahagian Kemahiran Dan Teknikal MARA
Level 20 & 21, MARA Headquarters,
50609, Jalan MARA,
Kuala Lumpur
03 26134620

_______________________________________________________________

Certificate in Automotive Body Repair Technology | Detailed Syllabus i

DETAILED SYLLABUS ENDORSEMENT

“It is certified that this programme detailed syllabus has been endorsed
by the BKT Senate and will be implemented for the teaching and learning
purposes for Certificate in Automotive Body Repair Technology".

ENDORSEMENT STAMP

_______________________________________________________________

Certificate in Automotive Body Repair Technology | Detailed Syllabus ii

CONTENTS Page
i
Copywrite ii
Detailed Syllabus Endorsement iii
Contents
1
1 Semester 1 Syllabus 6
1.1 CVB10013 Automotive Body Welding 11
1.2 CVB10024 Basic Paint Refinishing 13
1.3 CVB10033 Panel Forming And Finishing
1.4 CKV10062 Engineering Drawing 18
25
2 Semester 2 Syllabus 29
2.1 CVB20044 Basic Vehicle Body Repair 32
2.2 CVB20054 Intermediate Paint Refinishing
2.3 CVB20062 Plastic and Fibre Glass Mainteance 35
2.4 CVB20072 Basic Automotive Chasis Electrical 38
46
3 Semester 3 Syllabus 50
2.1 CVB30084 Intermediate Vehicle Body Repair 65
2.2 CVB30094 Advanced Paint Refinishing
2.3 CVB30102 Automotive Body Installation Parts 75
2.4 CVB30113 Custom Painting 76
2.5 CKV10072 Supervisory Skills

3 List of Curriculum Committee
MARA Academic Advisory Committee (MTAC)
MARA Technical Committee (MTEC)

Certificate in Automotive Body Repair Technology | Detailed Syllabus iii

Semester 1

UNIT DETAILED SY
CVB10013 AUTOMOTIV
1.0 General Safety Rules and
Regulations. (CLO1: C1, A1) UNIT LEARNING OUTCOMES

1.1. Personal safety. After completing the unit, students
1.2. Tools and equipment. be able to:
1.3. Working area.
1. Identify and use types of personne
correctly (C1)

2. Describe how to use the auto body to
equipment safely (C1)

3. Perform safe handling of hazardous
and waste (C1)

2.0 Cutting Tools, Applications And After completing the unit, students
Maintenance (CLO1: C1, CLO3: P3) be able to:

2.1. Hacksaw & Pneumatic Tools 1. Operate and set up small machine.
2.2. Files 2. Use the correct cutting material as
2.3. Chisels
2.4. Twist drill (P2)
2.5. Tap and dies
2.6. Snips

Certific

YLLABUS
VE BODY WELDING

S SUGGESTED TEACHING AND TOOLS/EQUIPMENTS
LEARNING ACTIVITIES / MATERIALS

s should Teaching: 1. Dark goggle
2. Clear goggle
el safety 1. Lecture: topic 1.1 – 1.3 3. Ear plug
ools and 2. Explain safety regulation 4. Fire extinguisher
material 3. Demonstrate the proper personal attire in 5. First aids kit

workshop.
4. Identify hazardous that may be

encountered in the body shop.
5. Emphasize the important of safety

conscious (safety first) in the workshop.
6. Explain various types of fire extinguisher.
7. Explain the important of the proper use

and disposal of hazardous material

Learning:

1. Discussion: Safety hazard in workshop.
2. Handling hardware by using safe work

practice and technique.
3. Observe safe working practices

s should Teaching: 1. Hacksaw

2. Power saw

1. Lecture: Topic 2.1 – 2.6 3. Pneumatic Drill

(P3) 2. Introduction types and function of the machine

required cutting tools. 4. Pneumatic

3. Explain how to use and handle the Sanding machine

instrument properly. 5. Cordless Hand rill

4. Explain and demonstrate how to 6. Files

sharpening the chisel, drill bit and snips. 7. Chisel

8. Twist drill

cate in Automotive Body Repair Technology | Detailed Syllabus 1

UNIT UNIT LEARNING OUTCOMES

3.0 Hand Tools (CLO1, CLO3: C1, P3) After completing the unit, students
be able to :
3.1. Hammers and mallet
3.2. Screw drivers 1. Identify and differentiate the types
3.3. Wrenches / spanners of hand tools (C1)
3.4. Allen / Torx Hex Key
2. Use tools in correct application (P3)

Certific

S SUGGESTED TEACHING AND TOOLS/EQUIPMENTS
LEARNING ACTIVITIES / MATERIALS

5. Demonstrate how to sharpening the 9. Tap & die
chisel, drill bit and snips. 10. Tin snip
11. Ball peen hammer
6. Demonstrate how to use and 12. Mild steel plate bar
maintenance the cutting tools in fitting 13. Mild steel round
works.
bar
Learning: 14. Mild steel plate
15. Drill bit
1. Preparation cutting tools used for fitting 16. Oil can
and oxy-acetylene works, application
and maintenance.

2. Practical works: Apply the proper
knowledge to the necessary training
project.

3. Apply safety precaution procedures.

s should Teaching: 1. Engineering
Hammers & mallet
and use 1. Lecture: Topic 3.1 – 3.4
) 2. Introduction of the types and function of 2. Screw drivers
3. Wrenches /
hand tools.
3. Explain and demonstrate how to use the Spanners
4. Allen / Torx Hex Key
hand tools and safely work practice and

technique.

Learning:

1. Preparation hand tools used for
engineering works, application and
maintenance.

2. Practical works: apply the proper
knowledge to the necessary training
project.

3. Apply safety precaution procedures.

cate in Automotive Body Repair Technology | Detailed Syllabus 2

UNIT UNIT LEARNING OUTCOMES

4.0 Marking and Measuring Tools. After completing the unit, students
(CLO1, CLO3: C1, A1, P3) be able to :

4.1. Center and pin punch. 1. Identify marking and measuring too
4.2. Numbers / letter punch. 2. Use equipment in proper way to a
4.3. Scriber.
4.4. Steel ruler. damage (P1)
4.5. Measuring tape 3. Maintain the marking and measuri
4.6. Squares.
4.7. Callipers. safely (C1,P3)
4.8. Combination set.
4.9. Drill gauge.
4.10.Thread pitch gauge.
4.11. Thickness gauge.
4.12. Vernier calliper

5.0 Clamping Devices After completing the unit, students
(CLO1,CLO3:C1,A1,P3) be able to :

5.1. Bench vice. 1. Chose the proper device for the
5.2. Clamps. application. (C1,P3)

Certific

S SUGGESTED TEACHING AND TOOLS/EQUIPMENTS
LEARNING ACTIVITIES / MATERIALS

s should Teaching: 1. Center & Pin
Punch
ols. (C1) 1. Lecture: Topic 4.1 – 4.13
avoid the 2. Introduction types and function of 2. Numbers/ letter
punch.
ing tools marking and measuring tools and
instrument. 3. Scriber.
3. Explain how to use the marking and 4. Steel ruler.
measuring tools and instruments 5. Measuring tape
correctly. 6. Squares.
4. Demonstrate how to read and calculate 7. Callipers
5. Explain how to stores, clean and keep 8. Combination set
the marking and measuring tools 9. Drill gauge
properly. 10. Thread pitch
6. Identify and use bench work tools &
equipment. gauge
7. Demonstrate the safe use of marking 11. Thickness gauge
measuring tools. 12. Vernier calliper
13. Bench work
14. Wire brush
15. Oil can

Learning:

1. Preparation tools, equipment and

materials used for marking and

measuring, application and

maintenance.

2. Practical works: Apply the proper

knowledge to the necessary training

project.

3. Apply safety precaution procedures.

s should Teaching: 1. Bench Vice.
2. Clamps.
1. Lecture: Topic 5.1 – 5.4. 3. Bolt and nuts
e related 2. Introduction on the types and function of 4. Rivets
5. Hand rivet
clamping devices.

cate in Automotive Body Repair Technology | Detailed Syllabus 3

UNIT UNIT LEARNING OUTCOMES

5.3. Bolt and nuts
5.4. Rivets

6.0 Auto Body Welding After completing the unit, students
(CLO1, CLO3: C1, A1, P3) be able to :

6.1. Welding Safety and Procedures 1. Set-up and perform oxy-acetylene
6.2. Oxy – Acetylene Welding (C4, P3)
6.3. Metal Inert Gas (MIG) Welding
2. Perform Metal Inert Gas (MIG)
6.4. Arc Welding 3. Perform Arc Welding
4. Perform Resistant Spot Welding
6.5. Resistant Spot Welding

Certific

S SUGGESTED TEACHING AND TOOLS/EQUIPMENTS
LEARNING ACTIVITIES / MATERIALS

3. Explain and demonstrate how to use the 6. Socket spanner
hand tools and safely work practice and
technique.

Learning:

1. Preparation clamping devices tools and
materials for fitting work, application and
maintenance.

2. Practical works: Apply the proper
knowledge to the necessary training
project.

3. Apply safety precaution procedures.

s should Teaching: 1. Oxy - Acetylene
welding set
welding. 1. Lecture: Topic 6.1 – 6.5
2. Emphasize safety precaution when 2. MIG welding
machine
performing all types of welding.
3. Introduction on the types and function of 3. Arc Welding
machine
oxy – acetylene welding gases.
4. Introduction types of gases. 4. Resistant spot
5. Introduction types of gases regulator, welding machine

installation and testing. 5. Welding bay
6. Demonstrate the oxy – acetylene 6. Dark goggle
7. Welding shield
installation and leakage testing correctly. 8. Welding tips /
7. Explain the types of flames and
welding nozzle
demonstrate the correct way how to find 9. Spark lighter.
the proper welding flames. 10. Nozzle cleaner.
8. Explain and demonstrate the types of 11. Filler rod.
weld joint. 12. Brass rod.
9. Demonstrate MIG welding with safe work 13. Flux
practice and technique 14. Plier
10.Introduction on the types and function of 15. Vice grip plier
MIG welding 16. Ballpein hammer.

cate in Automotive Body Repair Technology | Detailed Syllabus 4

UNIT UNIT LEARNING OUTCOMES

Certific

S SUGGESTED TEACHING AND TOOLS/EQUIPMENTS
LEARNING ACTIVITIES / MATERIALS

11.Demonstrate arc welding with safe work 17. Wire brush.
practice and technique 18. Mild steel plate
19. Leather glove
12.Introduction on the types and function of 20. Safety booth.
arc welding 21. Galvanise plate.

13.Demonstrate resistant spot welding with
safe work practice and technique

Learning:

1. Preparation tools, equipment and
materials for oxy-acetylene welding, MIG
welding and arc welding application and
maintenance.

2. Practical works: Apply the proper
knowledge to the necessary training
project.

3. Apply safety precaution procedures.

cate in Automotive Body Repair Technology | Detailed Syllabus 5

UNIT DETAILED SY
CVB10024 BASIC PA
1.0 Safety And Attitude.
( CLO1:C2 ) UNIT LEARNING OUTCOMES

1.1. PPE (personal protective After completing the unit, students
equipment) be able to :
1. Use the appropriate safety gear
1.2. Safety
1.3 Training hardware. suitable job (C2)

2.0 Type and Use of Surface After completing the unit, students

Preparation Equipment and Tools be able to :

(CLO1, CLO3: C2, A1, C4, A2, P1)

1. Identify and use various type of

2.1. Types, function and use of disc preparation tools (C1, P1)

sanders 2. Identify various types of substrate

2.2. Body scraper 3. Determine the refinishing procedu

2.3. Putty knife types and conditions of substrate (

2.4. Rubber block and rubber

squeegee

2.5. Abrasive holder

Certific

YLLABUS
AINT REFINISHING

S SUGGESTED TEACHING AND TOOLS/EQUIPMENTS
LEARNING ACTIVITIES / MATERIALS

s should Teaching: 1. First aid kit

2. First aid manual.

1. Lecture: Topic 1.1 – 1.3 3. Safety manual.

with the 2. Follow the safety rules. 4. Clear Goggle.

5. Mask respirator.

Learning: 6. Safety boot

7. Apron / Overall.

1. Discussion: Safety hazard in workshop. 8. Various type of fire

2. Handling hardware by using safe work extinguisher

practice and technique.

3. Observe safe working practices.

s should Teaching: 1. Disc sander.
2. Vacuum sanding
surface 1. Lecture: Topic 2.1 – 2.5. machine
2. Introduction and function of surface 3. Body scraper.
(C2) 4. Putty knife.
ures from preparation tools, using and maintain. 5. Rubber block.
(C2, P4) 3. Demonstrate: Apply the methods of 6. Rubber squeegee.
7. Abrasive holder.
removing deteriorated paint.

Learning:

1. Preparation tools and equipment for
surface preparation works, application
and maintenance.

2. Practical works: Apply the proper
knowledge to the necessary training
project.

3. Apply safety precaution procedures.

cate in Automotive Body Repair Technology | Detailed Syllabus 6

UNIT UNIT LEARNING OUTCOMES

3.0 Surface Preparation Materials After completing the unit, students
(CLO1,CLO3,C2,A1,P1) be able to :

3.1. Paint remover. 1. Identify and use various type of
3.2. Paint brush preparation materials. (C2)
3.3. Abrasive disc
3.4. Abrasive paper 2. Use the material properly accordin
3.5. Polyester putty specific job (P1))
3.6. Nitrocellulose putty

4.0 Sanding Method. After completing the unit, students
(CLO1,CLO4: C2, A1, P3) be able to :

4.1. Hand and machine sanding. 1. Differentiate dry and wet sanding
4.2. Dry and wet sanding (C2)

2. Perform correct sanding technique
(C2,P3)

Certific

S SUGGESTED TEACHING AND TOOLS/EQUIPMENTS
LEARNING ACTIVITIES / MATERIALS

s should Teaching: 1. Paint remover.
2. Paint brush
surface 1. Lecture: Topic 3.1 – 3.6. 3. Abrasive disc
ng to the 2. Introduction automotive painting surface 4. Abrasive paper
5. Polyester putty
preparation materials. 6. Nitrocellulose putty
3. Using automotive painting surface

preparation materials.
4. Estimate automotive painting surface

preparation materials.
5. Identify various type of damage paint on

the vehicle.
6. Demonstrate Mixing and apply the

polyester putty and Nitrocellulose putty
correctly.

Learning:

1. Preparation material and tools for
surface preparation works, application
and maintenance.

2. Practical works: Apply the proper
knowledge to the necessary training
project.

3. Apply safety precaution procedures.

s should Teaching: 1. Dry sandpaper.
2. Wet sand paper.
g method 1. Lecture: Topic 4.1 – 4.2. 3. Rubber block.
e. 2. Introduction the different between dry 4. Sanding machine.
5. Orbital sander.
and wet sanding method.
3. Explain the type of sand paper.
4. Explain the grade of sand paper

between dry and wet sanding.
5. Explain the use of sanding machine.

cate in Automotive Body Repair Technology | Detailed Syllabus 7