San Ace 2021

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9GT0924P4J001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
0.55 140 PWM duty cycle 0.55 140 27.6 V 5000 5000 min-1
100% 24 V
0.50 120 0.50 120 20.4 V 4000
0.45 60% 0.45
0.5 1.0 1.5 2.0 2.5 (m3/min)
30%

0.5 1.0 1.5 2.0 2.5 (m3/min)
0.40 100Static pressure 0.40 100 Fan speed
Static pressure
0.35 80 0.35 80 3000
0.30 0.30

0.25 60 0.25 60 2000
0.20 0.20
0.15 40 0.15 40 1000

0.10 20 0.10 20
0.05 0.05

00 00 0 100 (%)
PWM duty cycle
0 10 20 30 40 50 60 70 80 (CFM) 0 10 20 30 40 50 60 70 80 (CFM)
Air ow Air ow

■ Dimensions (unit: mm) Wide Temperature Range Fan 92 mm sq. DC

8-ø4.3±0.3

Mounting hole

92±0.5 300 +500
82.5±0.3

82.5±0.3 (10) 4±0.3 4±0.3
92±0.5
Lead wire 25.2±0.5
Rotating direction AWG26
UL 3266

Air ow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side Outlet side
90.5 90.5

4-ø4.5 4-ø4.5

ø97 ø108
90.5

82.5±0.3

90.5

82.5±0.3

82.5±0.3 82.5±0.3

■ Options page: p. 584

Finger guards
Model no.: 109-099E, 109-099H, 109-099C

451CATALOG No. C1111B001 '21.2.IT

Wide Temperature Range Fan

92×92×38 mm

San Ace 92T 9GT type

■ General Specifications

· Material……………………………………… Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 85˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -40 to +85˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 270 g

Wide Temperature Range Fan 92 mm sq. DC ■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
9GT0912P1M001
9GT0924P1M001 12 10.2 to 13.8 100 1.5 18.0 8100 3.3 116.6 315 1.26 58 -40 to +85 40000/85˚C
30 0.3 3.6 3750 1.5 53.0 72.0 0.29 37 (162000/40˚C)
24 20.4 to 27.6 100 0.75 18.0 8100 3.3 116.6 315 1.26 58
30 0.15 3.6 3750 1.5 53.0 72.0 0.29 37

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note 1: Sensor and control options are available for selection. Refer to the table on p. 632.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9GT0912P1M001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
400 PWM duty cycle 400 13.8 V 10000
1.5 100% 1.5 12 V
Static pressure Static pressure 8000 8100 min-1
300 60% 300 10.2 V
1.0 30% 1.0 Fan speed 6000

200 200 4000

0.5 0.5 100 2000
100

00 1 2 3 4 (m3/min) 00 1 2 3 4 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 80 100 120 140 (CFM) 0 20 40 60 80 100 120 140 (CFM)
Air ow Air ow

452 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9GT0924P1M001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
400 PWM duty cycle 400 27.6 V 10000
1.5 100% 1.5 24 V
Static pressure 8000 8100 min-1
300 Static pressure60% 300 20.4 V
1.0 30% 1.0 Fan speed 6000

200 200 4000

0.5 0.5 100 2000
100

00 1 2 3 4 (m3/min) 00 1 2 3 4 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 80 100 120 140 (CFM) 0 20 40 60 80 100 120 140 (CFM)
Air ow Air ow

■ Dimensions (unit: mm) Wide Temperature Range Fan 92 mm sq. DC

8-ø4.3±0.3

Mounting hole

+30
300 0

92±0.5 (10)
82.5±0.3
Lead wire
AWG24
UL 3266

82.5±0.3 4±0.3 38±0.5 4±0.3
92±0.5

Rotating direction Air ow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side 4-ø4.5 Outlet side 4-ø4.5

82.5±0.3 82.5±0.3

ø103 ø108
90.5

82.5±0.3

90.5

82.5±0.3

90.5 90.5

■ Options page: p. 584

Finger guards
Model no.: 109-099E, 109-099H, 109-099C

453CATALOG No. C1111B001 '21.2.IT

Wide Temperature Range Fan

120×120×38 mm

San Ace 120T 9GT type

■ General Specifications

· Material……………………………………… Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 85˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -40 to +85˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 420 g

Wide Temperature Range Fan 120 mm sq. DC ■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
9GT1212P1S001
9GT1224P1S001 12 9.0 to 13.8 100 2.2 26.4 5600 6.0 211.8 270 1.08 58 -40 to +85 40000/85˚C
35 0.48 5.76 2900 3.0 106.0 85.6 0.34 41 (162000/40˚C)
24 18.0 to 27.6 100 1.1 26.4 5600 6.0 211.8 270 1.08 58
35 0.24 5.76 2900 3.0 106.0 85.6 0.34 41

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note 1: Sensor and control options are available for selection. Refer to the table on p. 632.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9GT1212P1S001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
300 PWM duty cycle 350 13.8 V 6000
100% 12 V 5600 min-1
1.0 250 300
5000
1.0 250
Static pressure 200 Static pressure Fan speed 4000

150 200 3000
0.5
60% 150 9V 2000
100 35% 0.5

50 100

50 1000

0 0 1 2 3 4 5 6 7 (m3/min) 0 0 1 2 3 4 5 6 7 (m3/min) 0 100 (%)
PWM duty cycle
0 50 100 150 200 (CFM) 0 50 100 150 200 (CFM)
Air ow Air ow

454 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9GT1224P1S001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
300 PWM duty cycle 400 27.6 V 6000
100% 1.5 350 5600 min-1
1.0 250
300 5000

Static pressure 200 4000
Static pressure 1.0 250 24 V Fan speed

150 60% 200 18 V 3000 Wide Temperature Range Fan 120 mm sq. DC
0.5 35% 150
0.5 2000
100 100
1000
50 50

0 0 1 2 3 4 5 6 7 (m3/min) 0 0 1 2 3 4 5 6 7 8 (m3/min) 0 100 (%)
PWM duty cycle
0 50 100 150 200 (CFM) 0 50 100 150 200 250 (CFM)
Air ow Air ow

■ Dimensions (unit: mm)

8-ø4.5±0.3

Mounting hole

120±0.8 +30
104.8±0.3 300 0

104.8±0.3 (10) 6.5±0.3 38±0.5 6.5±0.3
120±0.8 3.5±0.3 3.5±0.3
Lead wire
Rotating direction AWG24
UL 3266

Air ow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side

104.8±0.3

4-ø4.5

117

ø130
104.8±0.3

117

■ Options

Finger guards page: p. 585

Model no.: 109-019E, 109-019K, 109-019C, 109-019H

455CATALOG No. C1111B001 '21.2.IT

456 CATALOG No. C1111B001 '21.2.IT

G Proof Fan

These fans are suitable for cooling CT scanners and other devices subject to high G-force or vibration.

■ Model Numbering System Not every combination of the following codes or characters is available. Contact us for an available combination.

9GP 12 24 P1 G 001

Type name Frame size Voltage PWM control function Frame thickness Speed code Individual customer’s spec
(3 digits)

Type name 9GP
Frame size (mm)
12 57
Voltage (V)
Frame thickness (mm) 120×120 ø172 × 150
Speed code
(sidecut)

24 48
24 48

15
38 51

GH G Proof Fan DC

■ How to Read Specifications (DC fan) The following is a sample. See respective product pages for detailed information.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[Pa] [inchH²O] [dB (A)] [˚C] [h]
9 G A 0 4 1 2 G 7 0 01 [V] [V] [A] [W] [min-1] [m³/min] [CFM]
192 0.77 42 -20 to +70 40000/60˚C
12 7 to 13.8 0.17 2.04 13100 0.36 12.7 (70000/40˚C)

Rated voltage ………………… This is the necessary voltage to drive the fan. E.g.) 12 VDC, 24 VDC, 48 VDC
Operating voltage range …… The voltage range over which fan operation is guaranteed.
Rated current ………………… The current when the fan is operating at rated voltage (at free air).
Rated input …………………… The power value when the fan is operating at rated voltage (at free air).
Rated speed …………………… The speed when the fan is operating at rated voltage (at free air).
Max. airflow …………………… The maximum airflow that the fan can generate during rated operation (measured with our double chamber measuring device).

Airflow is the volume of air generated by the fan per unit of time.
Max. static pressure ………… The maximum static pressure value that the fan can produce during rated operation (measured with our double chamber measuring device).

Static pressure indicates a fan's ability to move air against resistance due to the internal structure of the device to which the fan is installed.
SPL ……………………………… SPL stands for Sound Pressure Level. The noise level during the fan's rated operation.

Please refer to the technical material section for the measurement method.
Operating temperature ……… The temperature range over which fan operation is guaranteed (Non- condensing).
Expected life…………………… Service life hours that 90% of bearings will survive without failing when continuously operated at the rated voltage and 60˚C

temperature. Expected life at 40˚C is for reference only.
For more information, please refer to the technical material section.

457CATALOG No. C1111B001 '21.2.IT

G Proof Fan

120×120×38 mm

San Ace 120GP 9GP type

■ General Specifications

· Material……………………………………… Frame: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 440 g
· G-force tolerance…………………………… 735 m/s2 (75 G) for 1,000 h (Measured with our G-force testing machine.)

G Proof Fan 120 mm sq. DC ■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
9GP1224P1G001
9GP1248P1G001 24 15 to 30 100 1.6 38.4 6550 7.0 247 370 1.48 62 -20 to +70 40000/60˚C
20 0.12 2.88 2000 2.13 75.2 34.4 0.13 36 (70000/40˚C)
48 36 to 60 100 0.8 38.4 6550 7.0 247 370 1.48 62
20 0.08 3.84 2000 2.13 75.2 34.4 0.13 36

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note: Sensor and control options are available for selection. Refer to the table on p. 632.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9GP1224P1G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
450 PWM duty cycle 550 30 V 7000
100% 24 V 6550 min-1
400 2.0 500 6000
1.5 350 50% 450 15 V
20%
Static pressure 300 Static pressure 1.5 400 1 2 3 4 5 6 7 8 9 (m3/min) Fan speed 5000
1 2 3 4 5 6 7 8 (m3/min) 350 50 100 150 200 250 300 (CFM)
1.0 250 50 100 150 200 250 (CFM) 4000
300 Air ow
Air ow
200 1.0 250 3000

0.5 150 200 2000
100
0.5 150
100
50 1000
50

00 00 0 100 (%)
PWM duty cycle
0 0

458 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9GP1248P1G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
450 PWM duty cycle 550 60 V 7000
100% 48 V 6550 min-1
400 2.0 500 36 V 6000
1.5 350 50%
20% 450 1 2 3 4 5 6 7 8 9 (m3/min)
Static pressure
300 1 2 3 4 5 6 7 8 (m3/min) Static pressure 1.5 400 Fan speed 5000
50 100 150 200 250 (CFM) 350
1.0 250 4000
Air ow 300

200 1.0 250 3000

0.5 150 200 2000
100
0.5 150
100
50 1000
50

00 00 0 100 (%)
PWM duty cycle
0 0 50 100 150 200 250 300 (CFM)

Air ow

■ Dimensions (unit: mm)

8-ø4.5±0.3

Mounting hole

120±0.8 +30 G Proof Fan 120 mm sq. DC
104.8±0.3 300 0

104.8±0.3 (10) 6.5±0.3 6.5±0.3
120±0.8 3.5±0.3 3.5±0.3
Lead wire
AWG 24 38±0.5
UL 1430

Rotating direction Air ow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø4.5

104.8±0.3

117

ø130
104.8±0.3

117

■ Options

Finger guards page: p. 585 Resin finger guards page: p. 591
Model no.: 109-1000G
Model no.: 109-019E, 109-019K, 109-019C, 109-019H

Resin filter kits page: p. 592

Model no.: 109-1000F13 (13PPI), 109-1000F20 (20PPI),
109-1000F30 (30PPI), 109-1000F40 (40PPI)

459CATALOG No. C1111B001 '21.2.IT

G Proof Fan

ø172×150×51 mm

San Ace 172GP 9GP type Sidecut type

■ General Specifications

· Material……………………………………… Frame: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 880 g
· G-force tolerance…………………………… 735 m/s2 (75 G) for 1,000 h (Measured with our G-force testing machine.)

G Proof Fan ø172 mm DC ■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
9GP5724P5H001
9GP5748P5G001 24 16 to 30 100 5.0 120 8000 12.3 434 1000 4.02 77 -20 to +70 40000/60˚C
20 0.5 12.0 3000 4.6 162 175 0.7 51 (70000/40˚C)
48 36 to 72 100 5.0 240 10500 16.1 568 1600 6.43 83
20 0.41 19.7 3700 5.6 198 250 1.01 57

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9GP5724P5H001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
1200 PWM duty cycle 1200 30 V 10000
100% 24 V
4.0 Static pressure Static pressure 4.0 8000 8000 min-1
900 50% 900 16 V
20% Fan speed 6000
3.0 3.0
600 600 4000

2.0 2.0 2000

1.0 300 1.0 300

00 4 8 12 16 (m3/min) 00 4 8 12 16 (m3/min) 0 100 (%)
PWM duty cycle
0 100 200 300 400 500 (CFM) 0 100 200 300 400 500 (CFM)

Air ow Air ow

460 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9GP5748P5G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
7.0 1800 PWM duty cycle 7.0 1800 72 V 12000
100% 6.0 1500 48 V
6.0 1500 10000 10500 min-1

5.0 1200Static pressure 5.0 1200 8000
4.0 900 Static pressure 36 V Fan speed
3.0 4.0 900
2.0 600 50% 3.0 6000 G Proof Fan ø172 mm DC
1.0 300 20% 2.0 600
1.0 300 4000

2000

0 0 4 8 12 16 20 (m3/min) 0 0 4 8 12 16 20 (m3/min) 0 100 (%)
0 100 200 300 400 500 600 700 (CFM) 0 100 200 300 400 500 600 700 (CFM) PWM duty cycle
Air ow Air ow

■ Dimensions (unit: mm)

8-ø4.5±0.3

Mounting hole

10

ø172±0.8 +30
162±0.5 300 0

Lead wire
AWG 18
UL 1430

55.5° 55.5° 7.5±0.4 7.5±0.4
150±0.8
51±0.8
Rotating direction
Air ow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side
8.5

4-ø4.5

162±0.5
4-R4.25 ø168

55.5° 55.5°

147

■ Options

Finger guards page: p. 586

Model no.: 109-319J, 109-319E, 109-319H, 109-320

461CATALOG No. C1111B001 '21.2.IT

462 CATALOG No. C1111B001 '21.2.IT

Centrifugal Fan

Cooling fan blows air in a centrifugal course. It features high static pressure.
Related product: Splash Proof Centrifugal Fan p. 333

■ Model Numbering System Not every combination of the following codes or characters is available. Contact us for an available combination.

9T M 48 P 4 H 01

Type name Impeller size Voltage PWM control function Thickness Speed code Individual customer’s spec
(2 to 3 digits)

Bracket-mounted Centrifugal Fan P 0 H 001

9B1T P 48 PWM control function Thickness Speed code Individual customer’s spec
(3 digits)
Type name Impeller size Voltage

Type name 9B1T 9T Centrifugal Fan DC
Impeller size (mm)
D G, GA J M N P S
Voltage (V) ø70 ø175 ø133 ø100 ø150 ø221 ø225
Thickness (mm)
Speed code 12 24 48
12 24 48

0 146
69 ,min. 99, 119 35 25 20
H G etc.

■ How to Read Specifications (DC fan) The following is a sample. See respective product pages for detailed information.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[Pa] [inchH²O] [dB (A)] [˚C] [h]
9 G A 0 4 1 2 G 7 0 01 [V] [V] [A] [W] [min-1] [m³/min] [CFM]
192 0.77 42 -20 to +70 40000/60˚C
12 7 to 13.8 0.17 2.04 13100 0.36 12.7 (70000/40˚C)

Rated voltage ………………… This is the necessary voltage to drive the fan. E.g.) 12 VDC, 24 VDC, 48 VDC
Operating voltage range …… The voltage range over which fan operation is guaranteed.
Rated current ………………… The current when the fan is operating at rated voltage (at free air).
Rated input …………………… The power value when the fan is operating at rated voltage (at free air).
Rated speed …………………… The speed when the fan is operating at rated voltage (at free air).
Max. airflow …………………… The maximum airflow that the fan can generate during rated operation (measured with our double chamber measuring device).

Airflow is the volume of air generated by the fan per unit of time.
Max. static pressure ………… The maximum static pressure value that the fan can produce during rated operation (measured with our double chamber measuring device).

Static pressure indicates a fan's ability to move air against resistance due to the internal structure of the device to which the fan is installed.
SPL ……………………………… SPL stands for Sound Pressure Level. The noise level during the fan's rated operation.

Please refer to the technical material section for the measurement method.
Operating temperature ……… The temperature range over which fan operation is guaranteed (Non- condensing).
Expected life…………………… Service life hours that 90% of bearings will survive without failing when continuously operated at the rated voltage and 60˚C

temperature. Expected life at 40˚C is for reference only.
For more information, please refer to the technical material section.

463CATALOG No. C1111B001 '21.2.IT

Centrifugal Fan

ø70×20 mm

San Ace C70 9TD type

■ General Specifications

· Material……………………………………… Motor case: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and motor case)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and motor case)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 90 g

■ Specifications When the optional inlet nozzle (109-1106) is mounted.

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9TD12P6G001 [˚C] [h]
12 10.8 to 13.2 100 1.0 12 9200 1.13 39.9 560 2.24 61
Centrifugal Fan ø70 mm DC 20 0.1 1.2 2000 0.23 8.1 25 0.10 30 -20 to +70 40000/60˚C
(70000/40˚C)

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note:The maximum rated input value is 12.6 W.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9TD12P6G001 With pulse sensor with PWM control function Operating voltage range PWM duty - Speed characteristics example
PWM duty cycle

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
700 PWM duty cycle 700 13.2 V 10000
2.5 600 100% 2.5 600 9000 9200 min-1
8000
Static pressure 2.0 500 Static pressure2.0 500 12 V 7000
Speed10.8 V6000
1.5 400 1.5 400 5000
300 50% 300 4000
20% 3000
1.0 1.0 2000
200 200 1000

0.5 100 0.5 100

0 0 0.2 0.4 0.6 0.8 1.0 1.2 (m3/min) 0 0 0.2 0.4 0.6 0.8 1.0 1.2 (m3/min) 0 100 (%)
0 10 20 30 40 (CFM) PWM duty cycle
Air ow 0 10 20 30 40 (CFM)
Air ow

464 CATALOG No. C1111B001 '21.2.IT

■ Dimensions (unit: mm) Air ow direction

120°±1° 20±1
13.7±1
ROTATIONø48±0.3 Lead wire
ø56±1AWG 26
8.5±0.5UL 1007
ø56±1+30
ø70±1300 0

(10)

DEPTH OF SCREWS
MAX.4mm

34±1 3-M3
Rotating direction
Air ow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Fan side Inlet nozzle side
4-ø4.5
ø87±0.5
3ø-4ø83±.50.5 120° ø77±0.5

120°

120° Centrifugal Fan ø70 mm DC

■ Reference Diagram for Mounting

Inlet nozzle (1)
Fan Fan (3)
(24)

Finger guard Bolt length: 4 mm max
Inlet nozzle
page: p. 584 Inlet nozzle page: p. 589
■ Options Model no.: 109-1106

Finger guards
Model no.: 109-1128

465CATALOG No. C1111B001 '21.2.IT

Centrifugal Fan

ø100×25 mm

San Ace C100 9TM type

■ General Specifications

· Material……………………………………… Motor case: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and motor case)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and motor case)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 150 g

■ Specifications When the optional inlet nozzle (109-1080) is mounted.

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
9TM24P4H01
Centrifugal Fan ø100 mm DC 9TM48P4H01 24 21.6 to 26.4 100 0.44 10.56 6400 1.77 62.5 560 2.25 60 -20 to +70 40000/60˚C
0 0.05 1.2 2000 0.51 18.0 48 0.19 34 (70000/40˚C)
48 36 to 60 0.22 10.56 6400 1.77 62.5 560 2.25 60
100 0.04 1.92 2000 0.51 18.0 48 0.19 34
0

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note 1: The maximum rated input value is 14 W.
Note 2: Sensor and control options are available for selection. Refer to the table on p. 636.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9TM24P4H01 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
2.5 600 700 26.4 V 7000
2.5 600 24 V 6400 min-1
2.0 500 21.6 V 6000
1.5 400 2.0 500
Static pressure PWM duty cycle Static pressure 5000
100% 1.5 400 Fan speed
300
300 4000
1.0 1.0
50% 200 3000
200
0.5 100 2000 2000 min-1
0.5 100 0% 1000

00 0.5 1.0 1.5 2.0 (m3/min) 00 0.5 1.0 1.5 2.0 (m3/min) 0 100 (%)
PWM duty cycle
0 10 20 30 40 50 60 70 (CFM) 0 10 20 30 40 50 60 70 (CFM)
Air ow
Air ow

466 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9TM48P4H01 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
2.5 600 2.5 600 7000
6400 min-1
2.0 500 2.0 500 6000
1.5 400 60 V
PWM duty cycle 1.5 400 48 V
100% 300
Static pressure 36 V 5000
Static pressure1.0
300 200 4000
Fan speed1.0
50% 0.5 100 3000
200 0%
0.5 100 2000 2000 min-1

1000

00 0.5 1.0 1.5 2.0 (m3/min) 00 0.5 1.0 1.5 2.0 (m3/min) 0 100 (%)
PWM duty cycle
0 10 20 30 40 50 60 70 (CFM) 0 10 20 30 40 50 60 70 (CFM)

Air ow Air ow

■ Dimensions (unit: mm)

Air ow direction

25±1
18.5±1

ø56±0.3 Lead wire

AWG26
UL 1007

+30 ø72±1
300 0 8.5±0.5

(10) ø74±1 Centrifugal Fan ø100 mm DC
ø100±1

50.5±1 3-M4

Rotating direction Air ow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Fan side Inlet nozzle side

4-ø4.5

ø56±0.5 120° øø110166.±60±.05.5
3-ø4.5
120°
120°
(1.15)
■ Reference Diagram for Mounting

Inlet nozzle (5)
Finger guard (27)

Fan

Bolt length: 5 mm max.

467CATALOG No. C1111B001 '21.2.IT

■ Options page: p. 584 Inlet nozzle page: p. 589
Model no.: 109-1080, 109-1080H
Finger guards
Model no.: 109-099E, 109-099H

Centrifugal Fan ø100 mm DC

468 CATALOG No. C1111B001 '21.2.IT

Centrifugal Fan

ø133×91 mm

San Ace C133 9TJ type

■ General Specifications

· Material……………………………………… Motor case: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and motor case)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and motor case)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 660 g

■ Specifications When the optional inlet nozzle (109-1069) is mounted.

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9TJ24P0H61 [˚C] [h]
9TJ48P0H01 24 20.4 to 27.6 100 1.2 28.8 4150 6.39 226 395 1.59 61
48 36 to 72 100 0.55 26.4 4150 6.39 226 395 1.59 61 -20 to +70 40000/60˚C Centrifugal Fan ø133 mm DC
(70000/40˚C)

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9TJ24P0H61 With pulse sensor with PWM control function Operating voltage range PWM duty - Speed characteristics example
PWM duty cycle

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
2.0 500 PWM duty cycle 2.0 500 20.4 V/ 5000
100% 24 V/27.6 V
1.5 400 1.5 400 4000 4150 min-1
Static pressure Static pressure
300 300 Fan speed 3000
1.0 1.0
50% 2000
200 200
0.5 1000
0.5 100
100

0 0 1 2 3 4 5 6 7 (m3/min) 00 1 2 3 4 5 6 7 (m3/min) 0 100 (%)
PWM duty cycle
0 50 100 150 200 250 (CFM) 0 50 100 150 200 250 (CFM)
Air ow
Air ow

9TJ48P0H01 With pulse sensor with PWM control function Operating voltage range PWM duty - Speed characteristics example
PWM duty cycle

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
2.0 500 PWM duty cycle 2.0 500 48 V/72 V 5000
100% 36 V
Static pressure 1.5 400 1.5 400 Static pressure 4000 4150 min-1

300 300 Fan speed 3000
1.0 1.0
50% 2000
200 200
0.5 1000
0.5 100
100

0 0 1 2 3 4 5 6 7 (m3/min) 00 1 2 3 4 5 6 7 (m3/min) 0 100 (%)
PWM duty cycle
0 50 100 150 200 250 (CFM) 0 50 100 150 200 250 (CFM)
Air ow
Air ow

469CATALOG No. C1111B001 '21.2.IT

■ Dimensions (unit: mm) 45°±1° (10) Lead wire
+30
91±1 AWG24
60.6±1 300 0 UL 1430

Air ow direction 27±1
ø133±1
ø92.8±1 4-M4

46.8±1

ø58±0.3

Air ow direction ø77.8±1

Rotating direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Fan side Inlet nozzle side

4-ø4.5 45° ø1ø0181±8±0.05.5
ø58±0.5

4-ø4.5

Centrifugal Fan ø133 mm DC
(2)
13±1
■ Reference Diagram for Mounting

Finger guard Fan
Inlet nozzle Bolt length: 6 mm max.

■ Options page: p. 585 Inlet nozzle page: p. 589
Model no.: 109-1069, 109-1069H
Finger guards
Model no.: 109-1112

470 CATALOG No. C1111B001 '21.2.IT

Centrifugal Fan

ø150×35 mm

San Ace C150 9TN type

■ General Specifications

· Material……………………………………… Motor case: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and motor case)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and motor case)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 330 g

■ Specifications When the optional inlet nozzle (109-1081) is mounted.

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9TN24P1H01 [˚C] [h]
9TN48P1H01 24 20.4 to 27.6 100 0.62 14.9 3800 3.83 135 410 1.65 59
48 36.0 to 55.2 100 0.32 15.4 3800 3.83 135 390 1.57 59 -20 to +70 40000/60˚C Centrifugal Fan ø150 mm DC
(70000/40˚C)

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note:The maximum rated input value of 9TN24P1H01: 21.4 W and 9TN48P1H01: 22 W.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9TN24P1H01 With pulse sensor with PWM control function Operating voltage range PWM duty - Speed characteristics example
PWM duty cycle

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
2.0 500 PWM duty cycle 2.0 500 27.6 V 4000
100% 24 V 3800 min-1
1.5 400 50% 1.5 400
300 Static pressure Static pressure 20.4 V 3000
300
1.0 1.0 Fan speed 2000
200
200 1000
0.5 100
0.5 100

0 0 1 2 3 4 5 (m3/min) 00 1 2 3 4 5 (m3/min) 0 100 (%)
0 25 50 75 100 125 150 175 (CFM) PWM duty cycle
Air ow 0 25 50 75 100 125 150 175 (CFM)
Air ow
9TN48P1H01 With pulse sensor with PWM control function
Operating voltage range PWM duty - Speed characteristics example
PWM duty cycle

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
2.0 500 PWM duty cycle 2.0 500 55.2 V 4000
100% 48 V 3800 min-1
1.5 400 50% 1.5 400
Static pressure Static pressure 36 V 3000
300 300
1.0 1.0 Fan speed 2000

200 200 1000

0.5 100 0.5 100

00 1 2 3 4 5 (m3/min) 0 0 1 2 3 4 5 (m3/min) 0 100 (%)
PWM duty cycle
0 25 50 75 100 125 150 175 (CFM) 0 25 50 75 100 125 150 175 (CFM)
Air ow
Air ow

471CATALOG No. C1111B001 '21.2.IT

■ Dimensions (unit: mm)

Air ow direction 45°±1° +30 Lead wire
300 0 AWG24
35±1 (10) 4-M4 UL 1430
27.8±1
8.5±1

ø150±1 øø6849±.04.±31
ø105±1

51.2±1

Air ow direction Rotating direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Fan side ø1ø1172±80±.50.5 Inlet nozzle side

ø644±-0ø.54.5 4-ø4.5

45°

Centrifugal Fan ø150 mm DC
(1)
■ Reference Diagram for Mounting

Inlet nozzle
Finger guard

Fan (7)
(41)

Bolt length: 4 to 6 mm.

■ Options page: p. 585 Inlet nozzle page: p. 589
Model no.: 109-1081, 109-1081H
Finger guards
Model no.: 109-1104, 109-1104H

472 CATALOG No. C1111B001 '21.2.IT

Centrifugal Fan

ø175×69 mm

San Ace C175 9TGA type

■ General Specifications

· Material……………………………………… Motor case: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and motor case)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and motor case)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 720 g

■ Specifications When the optional inlet nozzle (109-1073) is mounted.

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
9TGA24P0H001
9TGA48P0G001 24 16 to 36 100 4.8 115 4950 15.3 541 830 3.33 77
15 0.14 3.36 800 2.5 88.3 21.8 0.088 38
48 36 to 72 100 3.5 168 5700 17.6 622 1100 4.42 80
15 0.07 3.36 800 2.5 88.3 21.8 0.088 38
Static pressure -20 to +70 40000/60˚C
Static pressure (70000/40˚C)

Fan speed

Centrifugal Fan ø175 mm DC
* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note:The maximum rated input value of 9TGA24P0H001: 210 W and 9TGA48P0G001: 325 W.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9TGA24P0H001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
1200 PWM duty cycle 1200 6000
4.5 100% 4.5

4.0 1000 4.0 1000 24 V/36 V 5000 4950 min-1

3.5 3.5 800 4000
3.0 800 3.0

2.5 600 2.5 600 16 V 3000
2.0 2.0
1.5 400 1.5 400 2000

1.0 200 15% 1.0 200 1000
0.5 0.5

00 5 10 15 20 (m3/min) 00 5 10 15 20 (m3/min) 0 100 (%)
PWM duty cycle
0 100 200 300 400 500 600 700 (CFM) 0 100 200 300 400 500 600 700 (CFM)
Air ow Air ow

473CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9TGA48P0G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
4.5 1200 PWM duty cycle 1200 48 V/72 V 6000
100% 4.5 5700 min-1
4.0 1000
4.0 1000 5000

3.5Static pressure 3.5 800 36 V Fan speed 4000
3.0 800 Static pressure 3.0

2.5 600 2.5 600 3000
2.0 2.0
1.5 400 1.5 400 2000

1.0 200 15% 1.0 200 1000
0.5 0.5

00 5 10 15 20 (m3/min) 00 5 10 15 20 (m3/min) 0 100 (%)
PWM duty cycle
0 100 200 300 400 500 600 700 (CFM) 0 100 200 300 400 500 600 700 (CFM)
Air ow
Air ow

■ Dimensions (unit: mm)

69±1
61.5±1

Air ow direction 52.9±1

ø80.2±1 Lead wire 27±1 ø58±0.3
AWG20
UL 3266

Centrifugal Fan ø175 mm DC +30
300 -0
ø175±1
ø131±1 45°±1°

4-M4

Air ow direction

Rotating direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Fan side ø14ø81±508±.50.5 Inlet nozzle side

ø584±-0ø.54.5 4-ø4.5

45°

474 CATALOG No. C1111B001 '21.2.IT

■ Reference Diagram for Mounting

Inlet nozzle

Finger guard

Fan Bolt length: 6 mm max.(2)
(14)
■ Options page: p. 585 Inlet nozzle page: p. 589
Model no.: 109-1073, 109-1073H Centrifugal Fan ø175 mm DC
Finger guards
Model no.: 109-722, 109-722H

475CATALOG No. C1111B001 '21.2.IT

Centrifugal Fan

ø175×69 mm

San Ace C175 9TG type

■ General Specifications

· Material……………………………………… Motor case: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and motor case)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and motor case)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 750 g

■ Specifications When the optional inlet nozzle (109-1073) is mounted.

The models listed below have pulse sensors with PWM control function.

Centrifugal Fan ø175 mm DC Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9TG24P0G01 [˚C] [h]
9TG24P0S01 24 20.4 to 27.6 100 3.9 93.6 4700 14.0 494.7 885 3.55 73
9TG48P0G01 100 2.35 56.4 3900 11.6 409.8 609 2.45 69 -20 to +60 40000/60˚C
48 36 to 55.2 100 1.95 93.6 4700 14.0 494.7 885 3.55 73 -20 to +70 (70000/40˚C)

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note 1: The maximum rated input value is 130 W.
Note 2: Sensor and control options are available for selection. Refer to the table on p. 636.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9TG24P0G01 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
1200 1200 27.6 V 5000
4.5 1100 4.5 1100 24 V 4700 min-1
20.4 V
4.0 1000 PWM duty cycle 4.0 1000 4000
3.5 900 100% 2 4 6 8 10 12 14 16 18 (m3/min)
Static pressure 800 50% Static pressure 3.5 900
700 800
3.0 600 3.0 700 Fan speed 3000
2.5
2.5 600
2.0 500 2.0 500
1.5 400 2000
1.5 400
300 300
1.0 200 1.0 200 1000
0.5 100
0.5 100
0 0 2 4 6 8 10 12 14 16 18 (m3/min) 00
0 100 (%)
0 100 200 300 400 500 600 (CFM) 0 100 200 300 400 500 600 (CFM) PWM duty cycle
Air ow Air ow

476 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9TG24P0S01 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC 3900 min-1
PWM frequency: 25 kHz
800 PWM duty cycle 800 27.6 V 4000
3.0 100% 3.0 700 24 V
Static pressure 2.5 600 Static pressure 20.4 V 3000
700 50%
2.5 600 2.0 500 2 4 6 8 10 12 14 (m3/min) Fan speed 2000
2 4 6 8 10 12 14 (m3/min) 100 200 300 400 500 (CFM)
2.0 500 100 200 300 400 500 (CFM) 1.5 400 1000
300 Air ow
1.5 400 Air ow 0 100 (%)
1.0 300 1.0 PWM duty cycle
200
200
0.5 100 0.5 100

00 00
0 0

9TG48P0G01 With pulse sensor with PWM control function Operating voltage range PWM duty - Speed characteristics example
PWM duty cycle

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
1200 1200 5000
4.5 1100 4.5 1100 4700 min-1

4.0 1000 PWM duty cycle 4.0 1000 55.2 V 4000
3.5 900 100% 48 V
Static pressure 800 50% Static pressure 3.5 900
700 800
3.0 600 3.0 700 Fan speed 3000
2.5
2.5 600
2.0 500 2.0 500 36 V
2000 Centrifugal Fan ø175 mm DC
1.5 400 1.5 400
300 300
1.0 200 1.0 200 1000
0.5 100 0.5 100

0 0 2 4 6 8 10 12 14 16 18 (m3/min) 0 0 2 4 6 8 10 12 14 16 18 (m3/min) 0 100 (%)
PWM duty cycle
0 100 200 300 400 500 600 (CFM) 0 100 200 300 400 500 600 (CFM)
Air ow Air ow

■ Dimensions (unit: mm)

69±1 +30 Lead wire
60.5±1 300　0 AWG22 (Model: 9TG24P0G01)
AWG24 (Model: 9TG24P0S01,
Air ow direction 45°±1°
9TG48P0G01)
UL 1430

(10)

27±1

ø175±1
ø131±1

46.8±1

4-M4

Air ow direction ø77.8±1 ø58±0.3

Rotating direction

477CATALOG No. C1111B001 '21.2.IT

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Fan side ø14ø81±508±.50.5 Inlet nozzle side

ø584±-0ø.54.5 4-ø4.5

45°

■ Reference Diagram for Mounting

Inlet nozzle
Finger guard
Centrifugal Fan ø175 mm DC
(2)
(14)
Fan

Bolt length: 4 to 6 mm.
To prevent bolts from loosening, use plain washers and spring washers.

■ Options page: p. 585 Inlet nozzle page: p. 589
Model no.: 109-1073, 109-1073H
Finger guards
Model no.: 109-722, 109-722H

478 CATALOG No. C1111B001 '21.2.IT

Centrifugal Fan

ø221×71 mm

San Ace C221 9TP type

■ General Specifications

· Material……………………………………… Motor case: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and motor case)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and motor case)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 1050 g

■ Specifications When the optional inlet nozzle (109-1135) is mounted.

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
9TP24P0H001 cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9TP48P0G001 24 16 to 36
9TP48P0H001 100 3.2 76.8 3050 17.6 622 530 2.13 71
48 36 to 72 15 0.4 9.6 1000 5.75 203 57.4 0.23 53
Static pressure 100 2.75 132 3650 21 742 760 3.05 74 -20 to +70
Static pressure150.2 9.6 1000 5.75 203 57.4 0.23 53
100 1.6 76.8 3050 17.6 622 530 2.13 71 -20 to +60 40000/60˚C
Fan speed150.2 9.610005.75 20357.4 0.2353(70000/40˚C)

Centrifugal Fan ø221 mm DC -20 to +70

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note 1: The maximum rated input value of 9TP48P0G001: 280 W and 9TP24P0H001/9TP48P0H001: 160 W.
Note 2: Sensor and control options are available for selection. Refer to the table on p. 636.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9TP24P0H001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
3.0 800 PWM duty cycle 3.0 800 24 V/36 V 5000
100% 16 V
2.5 600 2.5 600 4000
2.0 15% 2.0 5 10 15 20 25 (m3/min)
1.5 400 5 10 15 20 25 (m3/min) 1.5 400 200 400 600 800 (CFM) 3000 3050 min-1
200 400 600 800 (CFM)
1.0 200 1.0 200 Air ow 2000
0.5 Air ow 0.5
1000
00 00
0 0 0 100 (%)
PWM duty cycle

479CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9TP48P0G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
3.0 800 PWM duty cycle 800 48 V/72 V 5000
100% 3.0
2.5 600Static pressure 36 V Fan speed 4000
2.0 Static pressure15% 2.5 600 3650 min-1
5 10 15 20 25 (m3/min) 2.0 5 10 15 20 25 (m3/min)
1.5 400 200 400 600 800 (CFM) 1.5 400 200 400 600 800 (CFM) 3000

1.0 Air ow 1.0 200 Air ow 2000
200 0.5
1000
0.5 00
0 0 100 (%)
00 PWM duty cycle
0

9TP48P0H001 With pulse sensor with PWM control function Operating voltage range PWM duty - Speed characteristics example
PWM duty cycle

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
3.0 800 PWM duty cycle 3.0 800 48 V/72 V 5000
100% 36 V
Centrifugal Fan ø221 mm DC 2.5 600 Static pressure 2.5 600 4000
Static pressure 2.0 15% 2.0 5 10 15 20 25 (m3/min)
1.5 400 5 10 15 20 25 (m3/min) 1.5 400 200 400 600 800 (CFM) Fan speed 3000 3050 min-1
200 400 600 800 (CFM)
1.0 200 1.0 Air ow 2000
0.5 Air ow 200
1000
00 0.5
0 0 100 (%)
00 PWM duty cycle
0

■ Dimensions (unit: mm) +30 Lead wire
300 0 AWG20 or AWG22
Air ow direction
45°±1° 27±1
71±1
63.5±1

4-M4

ø221±1 64.9±1
ø161±1

ø104±1

Air ow direction ø58±0.3 Rotating direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Fan side ø245±0.5 Inlet nozzle side
4-ø4.5±0.5
ø58±40-ø.54.5 ø202±0.5
45°

45°

480 CATALOG No. C1111B001 '21.2.IT

■ Reference Diagram for Mounting Bracket-mounted model of this fan is available. For details, refer to pp. 485 to 487.

Finger guard Inlet nozzle

Fan (2)
Bolt length: 6 mm max. (21)

■ Options page: p. 587 Inlet nozzle Centrifugal Fan ø221 mm DCpage: p. 589
Model no.: 109-1135, 109-1135H
Finger guards
Model no.: 109-1138, 109-1138H

481CATALOG No. C1111B001 '21.2.IT

Centrifugal Fan

ø225×99 mm

San Ace C225 9TS type

■ General Specifications

· Material……………………………………… Motor case: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and motor case)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and motor case)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 1220 g

■ Specifications When the optional inlet nozzle (109-1134) is mounted.

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
9TS48P0G001
Centrifugal Fan ø225 mm DC 9TS48P0H001 48 36 to 72 100 3.65 175.2 3550 28.1 992 861 3.46 74.5 -20 to +60 40000/60˚C
15 0.24 11.5 1000 7.85 277 68.5 0.28 52.0 -20 to +70 (70000/40˚C)
100 2.08 99.8 2900 22.7 802 590 2.37 70.5
15 0.24 11.5 1000 7.85 277 68.5 0.28 52.0

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note:The maximum rated input value of 9TS48P0G001: 380 W and 9TS48P0H001: 200 W.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9TS48P0G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
4.0 1000 PWM duty cycle 4.0 1000 48 V/72 V 4000
100%
3.5 3.5 36 V 3550 min-1
3.0 800 15% 3.0 800
Static pressure 5 10 15 20 25 30 (m3/min) Static pressure 5 10 15 20 25 30 (m3/min) 3000
2.5 600 200 400 600 800 1000 (CFM) 2.5 600 200 400 600 800 1000 (CFM)
2.0 2.0 Fan speed 2000
1.5 400 Air ow 1.5 400 Air ow
1000
1.0 200 1.0 200
0.5 0.5 0 100 (%)
PWM duty cycle
00 00
0 0

482 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9TS48P0H001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
3.0 800 PWM duty cycle 800 4000
100% 3.0
2.5 600
2.0 2.5 600 3000 2900 min-1
1.5 400 2.0 2000
Static pressure 1.5 400 48 V/72 V
Static pressure 36 V
1.0
Fan speed200
1.0 1000
200 15% 0.5

0.5

0 0 5 10 15 20 25 30 (m3/min) 0 0 5 10 15 20 25 30 (m3/min) 0 100 (%)
PWM duty cycle
0 200 400 600 800 1000 (CFM) 0 200 400 600 800 1000 (CFM)
Air ow Air ow

■ Dimensions (unit: mm) +30 Lead wire
300 0
99±1.5
90.4±1.5 (10)

Air ow direction AWG20

45° UL 3266

27±1

4-M4

ø225 +02 +2 64.9±1 Centrifugal Fan ø225 mm DC
0

ø153

ø104±1 ø58±0.3

Air ow direction

Rotating direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Fan side Inlet nozzle side

ø210±0.5 4-ø4.5
ø200±0.5

ø584±-0ø.54.5 45°

483CATALOG No. C1111B001 '21.2.IT

■ Reference Diagram for Mounting Bracket-mounted model of this fan is available. For details, refer to pp. 488 to 490.

Centrifugal Fan ø225 mm DCInlet nozzle
(3.5)
(29.5)Finger guard

Fan
Bolt length: 6 mm max.

■ Options page: p. 587 Inlet nozzle page: p. 589
Model no.: 109-1134, 109-1134H
Finger guards
Model no.: 109-1137, 109-1137H

484 CATALOG No. C1111B001 '21.2.IT

Bracket-mounted Centrifugal Fan

270×270×99 mm

San Ace C221 9B1TP type

■ General Specifications

· Material……………………………………… Motor case: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-0)
Bracket: Aluminum, Plastic (Flammability: UL 94V-0)

· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)
Expected life at 40°C is for reference only.

· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection
For details, please refer to p. 599.

· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and bracket)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and bracket)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 1700 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
9B1TP24P0H001 cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9B1TP48P0G001 24 16 to 36
9B1TP48P0H001 100 3.2 76.8 3050 17.6 622 530 2.13 71
48 36 to 72 15 0.4 9.6 1000 5.75 203 57.4 0.23 53
Static pressure 100 2.75 132 3650 21.0 742 760 3.05 74 -20 to +70
Static pressure150.2 9.6 1000 5.75 203 57.4 0.23 53
100 1.6 76.8 3050 17.6 622 530 2.13 71 -20 to +60 40000/60˚C
Fan speed150.2 9.610005.75 20357.4 0.2353(70000/40˚C)

Centrifugal Fan 270 mm sq. DC-20 to +70

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note:The maximum rated input value of 9B1TP24P0H001/9B1TP48P0H001: 160 W and 9B1TP48P0G001: 280 W.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9B1TP24P0H001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
3.0 800 PWM duty cycle 3.0 800 24 V/36 V 5000
100%
2.5 600 2.5 600 16 V 4000
2.0 15% 2.0
1.5 400 5 10 15 20 25 (m3/min) 1.5 400 5 10 15 20 25 (m3/min) 3000 3050 min-1
200 400 600 800 (CFM) 200 400 600 800 (CFM)
1.0 1.0 200 2000
200 Air ow 0.5 Air ow
1000
0.5 00
0 0 100 (%)
00 PWM duty cycle
0

485CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9B1TP48P0G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
800 PWM duty cycle 800 48 V/72 V 5000
3.0 100% 3.0
36 V 4000
2.5 600 Static pressure 2.5 600 3650 min-1
2.0 Static pressure2.05 10 15 20 25 (m3/min)
1.5 400 1.5 400 200 400 600 800 (CFM) 3000
Fan speed
1.0 200 Air ow 2000
0.5
1.0 15% 1000
200 00
0
0.5

00 5 10 15 20 25 (m3/min) 0 100 (%)
PWM duty cycle
0 200 400 600 800 (CFM)
Air ow

9B1TP48P0H001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
800 PWM duty cycle 800 48 V/72 V 5000
3.0 100% 3.0 36 V
Centrifugal Fan 270 mm sq. DC Static pressure 4000
Static pressure 2.5 600 15% 2.5 600 Fan speed5 10 15 20 25 (m3/min)
2.0 5 10 15 20 25 (m3/min) 2.0 200 400 600 800 (CFM) 3000 3050 min-1
1.5 400 200 400 600 800 (CFM) 1.5 400
Air ow 2000
1.0 200 Air ow 1.0 200
0.5 0.5 1000

00 00 0 100 (%)
0 0 PWM duty cycle

■ Dimensions (unit: mm)

4-ø5±0.2 270±1 ø305±0.5 92±1 4-ø5±0.2
7±0.5 Mounting hole part Mounting hole
Mounting hole 220±2 Lead wire
+1.5 97.8±0.3 73.1±0.3 AWG 22
45° 7 -0.5 97.8±0.3 UL 3266

90° Air ow direction +30
245 0
220±2 (10)
97.8±0.3 73.1±0.3
270±1 73.1±0.3

ø155.2 73.1±0.3 2-282±2

Air ow direction Rotating direction 97.8±0.3

Rotating direction

486 CATALOG No. C1111B001 '21.2.IT

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet panel side
ø305±0.5
247.5±0.5 4-ø5

247.5±0.5

(Eac4h5)°

ø294.5±0.5

■ Reference Diagram for Mounting

Finger guard 109-1146 and 109-1146H should be mounted with four holes as in the drawing.
Finger guard

■ Options Fan Centrifugal Fan 270 mm sq. DC
page: p. 588
Finger guards
Model no.: 109-1146, 109-1146H

487CATALOG No. C1111B001 '21.2.IT

Bracket-mounted Centrifugal Fan

270×270×119 mm

San Ace C225 9B1TS type

■ General Specifications

· Material……………………………………… Motor case: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-0)
Bracket: Aluminum, Plastic (Flammability: UL 94V-0)

· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)
Expected life at 40°C is for reference only.

· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection
For details, please refer to p. 599.

· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and bracket)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and bracket)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 1920 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Centrifugal Fan 270 mm sq. DC Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
9B1TS48P0G001
9B1TS48P0H001 48 36 to 72 100 3.65 175.2 3550 28.1 992 861 3.46 74.5 -20 to +60 40000/60˚C
15 0.24 11.5 1000 7.85 277 68.5 0.28 52.0 -20 to +70 (70000/40˚C)
100 2.08 99.8 2900 22.7 802 590 2.37 70.5
15 0.24 11.5 1000 7.85 277 68.5 0.28 52.0

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note:The maximum rated input value of 9B1TS48P0G001: 380 W and 9B1TS48P0H001: 200 W.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9B1TS48P0G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
4.0 1000 PWM duty cycle 4.0 1000 48 V/72 V 4000
3.5 100%
3.0 800 3.5 36 V 3550 min-1
15% 3.0 800
Static pressure 2.5 600 5 10 15 20 25 30 (m3/min) Static pressure 5 10 15 20 25 30 (m3/min) 3000
2.0 200 400 600 800 1000 (CFM) 2.5 600 200 400 600 800 1000 (CFM)
1.5 400 2.0 Fan speed 2000
Air ow 1.5 400 Air ow
1.0 200 1000
0.5 1.0 200
0.5 0 100 (%)
00 PWM duty cycle
0 00

0

488 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9B1TS48P0H001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
3.0 800 PWM duty cycle 800 4000
100% 3.0
2.5 600
2.0 Static pressure Static pressure2.5 60048 V/72 V 3000 2900 min-1
1.5 400 Fan speed2.036 V2000
1.5 400

1.0 1.0 200 1000
200 0.5
15%
0.5

0 0 5 10 15 20 25 30 (m3/min) 0 0 5 10 15 20 25 30 (m3/min) 0 100 (%)
PWM duty cycle
0 200 400 600 800 1000 (CFM) 0 200 400 600 800 1000 (CFM)
Air ow Air ow

■ Dimensions (unit: mm)

4-ø5±0.2 270±1 ø305±0.5 112±1 4-ø5±0.2
7±0.5 Mounting hole part
Mounting hole Mounting hole 220±2 Lead wire
+1.5 AWG 20
45° 7 -0.5 97.8±0.3 73.1±0.3 97.8±0.3 UL 3266

90° Air ow direction +30
245 0
220±2 (10) Centrifugal Fan 270 mm sq. DC
97.8±0.3 73.1±0.3
270±1 73.1±0.3

ø146 73.1±0.3 2-282±2

Rotating direction Air ow direction Rotating direction 97.8±0.3

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet panel side
ø305±0.5
247.5±0.5 4-ø5

247.5±0.5 (Eac45h)°

ø294.5±0.5

489CATALOG No. C1111B001 '21.2.IT

■ Reference Diagram for Mounting

Finger guard 109-1146 and 109-1146H should be mounted with four holes as in the drawing.
Finger guard

Fan page: p. 588

■ Options

Finger guards
Model no.: 109-1146, 109-1146H

Centrifugal Fan 270 mm sq. DC

490 CATALOG No. C1111B001 '21.2.IT

Blower

Cooling fan specialized for high static pressure.
Related product: Splash Proof Blower p. 359

■ Model Numbering System Not every combination of the following codes or characters is available. Contact us for an available combination.

109B C 12 H C 2 -1

Type name Frame size Voltage Speed code Sensor specifications Frame thickness Individual customer’s spec

9B MB 12 G 2 01 -1

Type name Frame size Voltage Speed code Frame thickness Sensor specifications Individual customer’s spec

Fans with PWM control function P2 G 01

9B MB 12 PWM control function Frame thickness Speed code Individual customer’s spec
(2 to 3 digits)
Type name Frame size Voltage

Type name 109B 9B F, FB G J M, MB, MC
Frame size (mm) 120 160 127 97
CD
Voltage (V) 52 76

Speed code 12 24 Blower DC
Sensor specifications 12 24

Frame thickness (mm) F G H K M S etc.

A, 02, 002 C, 01, 001 D
Without a sensor With a pulse sensor With a lock sensor

1 2 76
40 30, 32, 33 15 20

■ How to Read Specifications (DC fan) The following is a sample. See respective product pages for detailed information.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[Pa] [inchH²O] [dB (A)] [˚C] [h]
9 G A 0 4 1 2 G 7 0 01 [V] [V] [A] [W] [min-1] [m³/min] [CFM]
192 0.77 42 -20 to +70 40000/60˚C
12 7 to 13.8 0.17 2.04 13100 0.36 12.7 (70000/40˚C)

Rated voltage ………………… This is the necessary voltage to drive the fan. E.g.) 12 VDC, 24 VDC, 48 VDC
Operating voltage range …… The voltage range over which fan operation is guaranteed.
Rated current ………………… The current when the fan is operating at rated voltage (at free air).
Rated input …………………… The power value when the fan is operating at rated voltage (at free air).
Rated speed …………………… The speed when the fan is operating at rated voltage (at free air).
Max. airflow …………………… The maximum airflow that the fan can generate during rated operation (measured with our double chamber measuring device).

Airflow is the volume of air generated by the fan per unit of time.
Max. static pressure ………… The maximum static pressure value that the fan can produce during rated operation (measured with our double chamber measuring device).

Static pressure indicates a fan's ability to move air against resistance due to the internal structure of the device to which the fan is installed.
SPL ……………………………… SPL stands for Sound Pressure Level. The noise level during the fan's rated operation.

Please refer to the technical material section for the measurement method.
Operating temperature ……… The temperature range over which fan operation is guaranteed (Non- condensing).
Expected life…………………… Service life hours that 90% of bearings will survive without failing when continuously operated at the rated voltage and 60˚C

temperature. Expected life at 40˚C is for reference only.
For more information, please refer to the technical material section.

491CATALOG No. C1111B001 '21.2.IT

Blower

52×15 mm

San Ace B52 9BC type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow
· Mass………………………………………… 33 g

■ Specifications

The models listed below have pulse sensors.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
109BC12GC7-1 [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
Blower 52 mm DC 109BC12HC7-1 12 6 to 13.8 -20 to +70 40000/60˚C
109BC12FC7-1 0.12 1.44 6200 0.125 4.4 215 0.86 43 (70000/40˚C)
109BC12MC7-1 24 12 to 27.6 0.1 1.2 5600 0.112 4.0 165 0.66 40
109BC24GC7-1 0.08 0.96 5100 0.101 3.6 130 0.52 38
109BC24HC7-1 0.06 0.72 4600 0.091 3.2 100 0.4 35
109BC24FC7-1 0.07 1.68 6200 0.125 4.4 215 0.86 43
0.05 1.2 5600 0.112 4.0 165 0.66 40
0.04 0.96 5100 0.101 3.6 130 0.52 38

Note 1: Sensor and control options are available for selection. Refer to the table on p. 620.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics

109BC12GC7-1 With pulse sensor 109BC12HC7-1 With pulse sensor 109BC12FC7-1 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

280 1.0 260 220
1.0 240 0.9 240
220 0.8 200 13.8 V
0.8 200 12 V
13.8 V 0.8 200 13.8 V Static pressure 0.7 180
0.6 160 Static pressure 12 V Static pressure 12 V 160
120 0.7 180 0.6 140
6V 160 6V
0.4 0.6 140 0.02 0.04 0.06 0.08 0.1 0.12 0.14 (m3/min) 0.5 120
80 0.5 120
0.4 100
0.2 40 0.4 100
0.3 80 0.3 80
60
0.2 60 0.2 40 6V
0.1 40 0.02 0.04 0.06 0.08 0.1 0.12 (m3/min)
20 0.1 20
00
00 0.04 0.08 0.12 0.16 (m3/min) 00

0 1.0 2.0 3.0 4.0 5.0 (CFM) 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 (CFM) 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 (CFM)

Air ow Air ow Air ow

492 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics

109BC12MC7-1 With pulse sensor 109BC24GC7-1 With pulse sensor 109BC24HC7-1 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.7 180 280 1.0 260
1.0 240 0.9 240
0.6 160 27.6 V 220 27.6 V
140 0.8 200 24 V 0.8 200 24 V
Static pressure 0.5 120 13.8 V 180
Static pressure12 V0.6 16012 V 0.7 160 12 V
Static pressure0.4 1001200.61400.02 0.04 0.06 0.08 0.1 0.12 0.14 (m3/min)
0.5 120
0.3 80 0.4
0.2 60 80 0.4 100
80
40 6V 0.2 40 0.3 60
0.1 20 0.2 40
0.1 20

0 0 0.02 0.04 0.06 0.08 0.1 0.12 (m3/min) 00 0.04 0.08 0.12 0.16 (m3/min) 00

0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 (CFM) 0 1.0 2.0 3.0 4.0 5.0 (CFM) 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 (CFM)
Air ow
Air ow Air ow

109BC24FC7-1 With pulse sensor
Operating voltage range

(inch H2O) (Pa)

220

0.8 200 27.6 V
24 V
Static pressure 0.7 180
160
0.6 140

0.5 120

0.4 100

0.3 80
60
0.2 40 12 V

0.1 20

0 0 0.02 0.04 0.06 0.08 0.1 0.12 (m3/min) Blower 52 mm DC

0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 (CFM)

Air ow

■ Dimensions (unit: mm) (0.8) 15±0.5 24.7±1

(8) (4) (2) (1.2)

(1.2) AIRFLOW
(17.5)

28.2±1
19.9±1

20±0.3 23±0.3
52.6±1
ø32±1
(10) 2-øM4o.5u±n0ti.n3g hole 18±0.3 20±0.3
51±1
300±30
Lead wire Air ow direction
AWG26
UL 1061

Rotating direction

493CATALOG No. C1111B001 '21.2.IT

Blower

76×20 mm

San Ace B76 9BD type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow
· Mass………………………………………… 58 g

■ Specifications

The models listed below have pulse sensors.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
9BD12SC6-1 [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9BD12HC6-1 12 5 to 13.8
9BD12FC6-1 0.28 3.36 4500 0.29 10.2 300 1.2 43
9BD24SC6-1 5.5 to 13.8 0.21 2.52 4200 0.27 9.5 230 0.92 41 40000/60˚C
9BD24HC6-1 0.18 2.16 3900 0.25 8.8 200 0.8 39 (70000/40˚C)
Blower 76 mm DC 9BD24FC6-1 0.14 3.36 4500 0.29 10.2 300 1.2 43 -20 to +70
0.12 2.88 4200 0.27 9.5 230 0.92 41
24 10 to 27.6 0.1 2.4 3900 0.25 8.8 200 0.8 39

Note 1: Sensor and control options are available for selection. Refer to the table on p. 625.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics

9BD12SC6-1 With pulse sensor 9BD12HC6-1 With pulse sensor 9BD12FC6-1 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

1.6 400 1.4 350 1.2 300

1.4 350 1.2 300 1.0 250
1.0 250 0.8 200
Static pressure 1.2 300 Static pressure 13.8 V Static pressure 0.6 150 13.8 V
1.0 250 12 V
0.8 200 13.8 V 0.8 200 12 V
12 V

0.6 150 0.6 150

0.4 100 5V 0.4 100 5.5 V 0.4 100 5.5 V
0.2 50 0.2 50 0.2 50

0 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 (m3/min) 0 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 (m3/min) 0 0 0.05 0.1 0.15 0.2 0.25 0.3 (m3/min)

0 1 2 3 4 5 6 7 8 9 10 11 1213 (CFM) 0 1 2 3 4 5 6 7 8 9 10111213 (CFM) 0 1 2 3 4 5 6 7 8 9 10 11 (CFM)
Air ow Air ow Air ow

494 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics

9BD24SC6-1 With pulse sensor 9BD24HC6-1 With pulse sensor 9BD24FC6-1 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

1.6 400 1.4 350 1.2 300

1.4 350 1.2 300 1.0 250
1.0 250 0.8 200
Static pressure 1.2 300 Static pressure 27.6 V Static pressure 0.6 150 27.6 V
1.0 250 24 V
0.8 200 27.6 V 0.8 200 24 V
24 V

0.6 150 0.6 150

0.4 100 10 V 0.4 100 10 V 0.4 100 10 V
0.2 50 0.2 50 0.2 50

0 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 (m3/min) 0 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 (m3/min) 0 0 0.05 0.1 0.15 0.2 0.25 0.3 (m3/min)

0 1 2 3 4 5 6 7 8 9 1011 1213 (CFM) 0 1 2 3 4 5 6 7 8 9 10111213 (CFM) 0 1 2 3 4 5 6 7 8 9 10 11 (CFM)
Air ow Air ow Air ow

■ Dimensions (unit: mm)

(1.5) (10) (12) (1.4) 20±1 (1.2) (1.2) 32.1±1 2-ø4.5±0.3
(1.2)
(12) (10) Mounting hole
42.2±1 (1.5)
Lead wire 24.9±1 AIRFLOW 26±0.3 31±0.3
AWG26 76±1
UL 1007 ø42±1 Blower 76 mm DC

300±30 26±0.3 31±0.3
69.7±1
(10)
Air ow direction
Rotating direction

495CATALOG No. C1111B001 '21.2.IT

Blower

76×30 mm

San Ace B76 9BD type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black or Blue Sensor Yellow
· Mass………………………………………… 100 g

■ Specifications

The models listed below have pulse sensors.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
109BD12HC2 [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
109BD12FC2 12 10.2 to 13.8 -20 to +60
109BD12MC2 0.37 4.44 3000 0.36 12.7 151.9 0.61 41.5
Blower 76 mm DC 109BD24HC2 24 20.4 to 27.6 0.27 3.24 2600 0.31 10.9 98 0.394 37 -20 to +70 40000/60˚C
109BD24FC2 0.14 1.68 2100 0.25 8.8 58.8 0.236 32.5 -20 to +60 (70000/40˚C)
109BD24MC2 0.17 4.08 3000 0.36 12.7 151.9 0.61 41.5
0.14 3.36 2600 0.31 10.9 98 0.394 37 -20 to +70
0.1 2.4 2100 0.25 8.8 58.8 0.236 32.5

Note 1: Sensor and control options are available for selection. Refer to the table on p. 620.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics

109BD12HC2 With pulse sensor 109BD12FC2 With pulse sensor 109BD12MC2 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range
(inch H2O) (Pa)
(inch H2O) (Pa) (inch H2O) (Pa)
0.4 100
0.8 200 0.6 150
0.7
0.6 150 13.8 V 0.5 13.8 V 13.8 V
0.5 12 V 12 V
Static pressure 0.4 100 10.2 V Static pressure 0.4 100 12 V Static pressure 0.3 10.2 V
0.3 0.3 10.2 V 0.2 50
0.2 50 0.1 0.2 0.3 0.4 (m3/min) 0.2 50
0.1 2 4 6 8 10 12 14 (CFM)
0.1 0.1
00 Airflow
00 0.1 0.2 0.3 0.4 (m3/min) 00 0.1 0.2 0.3 (m3/min)
0
0 2 4 6 8 10 12 14 (CFM) 0 2 4 6 8 10 12 (CFM)
Airflow Airflow

496 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics

109BD24HC2 With pulse sensor 109BD24FC2 With pulse sensor 109BD24MC2 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range
(inch H2O) (Pa)
(inch H2O) (Pa) (inch H2O) (Pa)
0.4 100
0.8 200 0.6 150
0.7
0.6 150 27.6 V 0.5 27.6 V 27.6 V
0.5 24 V 24 V
Static pressure0.4 100 20.4 V 0.4 100 24 V 0.3 20.4 V
Static pressure0.30.320.4 V 0.2 50
Static pressure0.2 500.1 0.2 0.3 0.4 (m3/min)0.2 50
0.1 2 4 6 8 10 12 14 (CFM)
0.1 0.1
00 Airflow
00 0.1 0.2 0.3 0.4 (m3/min) 00 0.1 0.2 0.3 (m3/min)
0
0 2 4 6 8 10 12 14 (CFM) 0 2 4 6 8 10 12 (CFM)
Airflow Airflow

■ Dimensions (unit: mm) (1.5) (38) 24.1±0.3
(10) (10)
76±1

(2.5) 30±0.5 (2)

(2) 40±0.3 36.2±0.3

75.5±1 AIRFLOW

(36) ø47

30.9±0.3 Blower 76 mm DC

+50 2-ø4.5±0.3 21.6±0.3
300 0
Mounting hole Air ow direction
(10)
Lead wire
AWG24
UL 1007
Rotating direction

497CATALOG No. C1111B001 '21.2.IT

Blower

97×33 mm

San Ace B97 9BMC type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 200 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
9BMC12P2G001
9BMC24P2G001 12 10.8 to 13.2 100 6.2 74.4 8200 1.85 65.3 1950 7.83 69 -20 to +70 40000/60˚C
20 0.38 4.56 2800 0.58 20.4 121.0 0.48 44 (70000/40˚C)
24 21.6 to 26.4 100 3.1 74.4 8200 1.85 65.3 1950 7.83 69
Blower 97 mm DC 20 0.19 4.56 2800 0.58 20.4 121.0 0.48 44

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note 1: Sensor and control options are available for selection. Refer to the table on p. 625.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9BMC12P2G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
8 2000 8 2000 12 V/13.2 V 9000
7 8000
7 PWM duty cycle 7000 8200 min-1
6 1500 100% 6000
Static pressure Static pressure 6 1500 5000
5 5 10.8 V Fan speed 4000
3000
4 1000 60% 4 1000 2000
3 1000
3

2 500 20% 2 500
1
1

00 0.5 1.0 1.5 2.0 (m3/min) 00 0.5 1.0 1.5 2.0 (m3/min) 0 100 (%)
PWM duty cycle
0 10 20 30 40 50 60 70 (CFM) 0 10 20 30 40 50 60 70 (CFM)

Air ow Air ow

498 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9BMC24P2G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
8 2000 8 2000 24 V/26.4 V 9000
7 8000
7 PWM duty cycle 7000 8200 min-1
6 1500 100% 6000
6 1500 5000
5 4000
5Static pressure 21.6 V 3000
Static pressure 2000
4 1000 60% 4 1000 1000
3 Fan speed
3

2 500 20% 2 500
1
1

00 0.5 1.0 1.5 2.0 (m3/min) 00 0.5 1.0 1.5 2.0 (m3/min) 0 100 (%)
PWM duty cycle
0 10 20 30 40 50 60 70 (CFM) 0 10 20 30 40 50 60 70 (CFM)

Air ow Air ow

■ Dimensions (unit: mm)

R59.6±1 33±1 97.1±1
(50) 39±0.3
(2.4) (1.5) (52) (1.5) (21) (10) 31.5±0.3 4-ø4.5±0.3

(18.6) Lead wire Mounting hole
(18.6) Rated voltage 12 V fan
AWG 20 (8) (1.5) AIR FLOW 39±0.3
UL 1430 45±0.3
(58) 95±1
Rated voltage 24 V fan
AWG 24 Blower 97 mm DC
UL 1430

300±30 39±0.3 32±0.3 ø56±1

R51.2±1 (10) (5) 26±0.3
32±0.3

Rotating direction Air ow direction

499CATALOG No. C1111B001 '21.2.IT

Blower

97×33 mm

San Ace B97 9BMB type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown

(For models without PWM control function, there is no speed control wiring.)
· Mass………………………………………… 190 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
9BMB12P2K01 cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
Blower 97 mm DC 9BMB12P2G01 10.8 to 13.2 -20 to +70 40000/60˚C
9BMB12P2S01 12 10.2 to 13.8 100 3.4 40.8 6850 1.61 56.8 1280 5.14 66 (70000/40˚C)
9BMB12P2H01 100 1.8 21.6 5750 1.34 47.3 760 3.05 61
9BMB12P2F01 24 21.6 to 26.4 100 1.4 16.8 5250 1.22 43.1 610 2.45 59
9BMB24P2K01 100 1.1 13.2 4850 1.11 39.2 490 1.968 57
9BMB24P2G01 100 0.9 10.8 4500 1.04 36.7 410 1.64 56
9BMB24P2S01 100 1.62 38.88 6850 1.61 56.8 1280 5.14 66
9BMB24P2H01 100 0.83 19.92 5750 1.34 47.3 760 3.05 61
9BMB24P2F01 100 0.7 16.8 5250 1.22 43.1 610 2.45 59
100 0.55 13.2 4850 1.11 39.2 490 1.968 57
100 0.45 10.8 4500 1.04 36.7 410 1.64 56

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

The models listed below have pulse sensors.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
9BMB12K201 [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9BMB12G201 7 to 13.2
9BMB12S201 3.4 40.8 6850 1.61 56.8 1280 5.14 66
9BMB12H201 12 7 to 13.8 1.8 21.6 5750 1.34 47.3 760 3.052 61
9BMB12F201 1.4 16.8 5250 1.22 43.1 610 2.45 59
9BMB24K201 21.6 to 26.4 1.1 13.2 4850 1.11 39.2 490 1.968 57 -20 to +70 40000/60˚C
9BMB24G201 24 12 to 26.4 0.9 10.8 4500 1.04 36.7 410 1.647 56 (70000/40˚C)
9BMB24S201 1.62 38.88 6850 1.61 56.8 1280 5.14 66
9BMB24H201 0.83 19.9 5750 1.34 47.3 760 3.052 61
9BMB24F201 0.7 16.8 5250 1.22 43.1 610 2.45 59
0.55 13.2 4850 1.11 39.2 490 1.968 57
0.45 10.8 4500 1.04 36.7 410 1.647 56

Note 1: Sensor and control options are available for selection. Refer to the table on p. 625.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

500 CATALOG No. C1111B001 '21.2.IT