San Ace 2021

DC Fan DC Fan 80 mm sq. DC

80×80×20 mm

San Ace 80 9P type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black or Blue Sensor Yellow
· Mass………………………………………… 100 g

■ Specifications

The models listed below have ribs and pulse sensors.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
109P0812C601 [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
109P0812H601 12 10.2 to 13.8 -20 to +60
109P0812M601 0.29 3.48 3700 1.07 37.8 46 0.185 39
109P0824H601 24 20.4 to 27.6 0.21 2.52 2900 0.84 29.7 29.4 0.118 31 60000/60˚C
109P0824M601 48 38 to 57.6 0.13 1.56 2300 0.67 23.7 18.6 0.075 25 -20 to +70 (90000/40˚C)
109P0848C601 0.12 2.88 2900 0.84 29.7 29.4 0.118 31
109P0848H601 0.07 1.68 2300 0.67 23.7 18.6 0.075 25 40000/60˚C
0.08 3.84 3700 1.07 37.8 46 0.185 39 -20 to +60 (70000/40˚C)
0.05 2.4 2900 0.84 29.7 29.4 0.118 31

Note 1: Sensor and control options are available for selection. Refer to the table on p. 622.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics

109P0812C601 With pulse sensor 109P0812H601 With pulse sensor 109P0812M601 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

70 0.16 40 0.12 30
0.25 60 0.14
Static pressure 13.8 V 0.12 30 13.8 V 0.10 13.8 V
0.20 50 Static pressure12 V0.10 0.08 20
Static pressure0.08 2012 V0.06 12 V
0.15 40 10.2 V 0.06 10.2 V 0.04 10 10.2 V
30 0.04 10
0.02 0.02
0.10
20 0.5 1.0 1.5 (m3/min) 00 0.5 1.0 (m3/min) 00 0.5 1.0 (m3/min)
10 20 30 40 50 (CFM) 30 40 (CFM) 0 30 40 (CFM)
0.05 10 0 10 20 10 20
Airflow Air ow Air ow
00

0

101CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics
DC Fan 80 mm sq. DC
109P0824H601 With pulse sensor 109P0824M601 With pulse sensor 109P0848C601 With pulse sensor
Static pressure Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) 27.6 V Static pressure(inch H2O) (Pa) 27.6 V Static pressure(inch H2O) (Pa) 57.6 V
48 V
0.16 40 24 V 0.12 30 24 V 0.30 38 V
0.14 20.4 V 0.10 20.4 V 70
0.12 30 0.08 20
0.10 0.5 1.0 (m3/min) 0.06 0.5 1.0 (m3/min) 0.25 60 0.5 1.0 1.5 (m3/min)
0.08 20 30 40 (CFM) 0.04 10 30 40 (CFM) 50 60 (CFM)
0.06 10 20 0.02 10 20 0.20 50 10 20 30 40
0.04 10 Air ow Air ow Air ow
0.02 00 0.15 40
0 30
00
0.10
0 20

0.05 10
00

0

109P0848H601 With pulse sensor
Operating voltage range

(inch H2O) (Pa)

0.18

Static pressure 0.16 40 57.6 V
0.14

0.12 30 48 V
0.10

0.08 20 38 V
0.06

0.04 10

0.02

00 0.5 1.0 1.5 (m3/min)

0 10 20 30 40 50 (CFM)
Airflow

■ Dimensions (unit: mm) 4-ø4.3±0.3 0
20 -1
80±0.5 Mounting hole
71.5±0.3 (3.5) (3.5)
(10)
80±0.5
71.5±0.3 300+300
Lead wire

AWG24
UL 1007

Rotating direction Airflow direction

102 CATALOG No. C1111B001 '21.2.IT

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)
78
Inlet side 4-ø4.5 Outlet side 4-ø4.5
71.5±0.3
71.5±0.3 71.5±0.3
78

71.5±0.3

DC Fan 80 mm sq. DC
ø88 ø89.5

78 78

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1002G
Finger guards
Model no.: 109-049E, 109-049H, 109-049C

Resin filter kits page: p. 592

Model no.: 109-1002F13 (13PPI), 109-1002F20 (20PPI),
109-1002F30 (30PPI), 109-1002F40 (40PPI)

103CATALOG No. C1111B001 '21.2.IT

DC Fan 80 mm sq. DC DC Fan

80×80×25 mm

San Ace 80 9GA type Low Power Consumption Fan

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 110 g

■ Specifications

The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
9GA0812P4J001 cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9GA0812P4G001 12 10.8 to 13.2 -20 to +70 40000/60˚C
9GA0812P4H001 100 0.6 7.2 7400 2.07 73.0 177.6 0.7 48 (70000/40˚C)
9GA0824P4J001 24 21.6 to 26.4 25 0.08 0.96 2500 0.69 24.3 20.2 0.08 21
9GA0824P4G001 100 0.48 5.76 6800 1.91 67.4 150 0.6 45
9GA0824P4H001 25 0.06 0.72 1500 0.42 14.8 7.2 0.02 17
100 0.22 2.64 5200 1.46 51.5 87.7 0.35 37
25 0.06 0.72 1600 0.44 15.5 8.3 0.03 17
100 0.28 6.72 7400 2.07 73.0 177.6 0.7 48
25 0.06 1.44 2800 0.78 27.5 25.4 0.1 23
100 0.21 5.04 6800 1.91 67.4 150 0.6 45
25 0.04 0.96 2100 0.58 20.4 14.3 0.05 19
100 0.1 2.4 5200 1.46 51.5 87.7 0.35 37
25 0.02 0.48 1500 0.42 14.8 7.2 0.02 17

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note 1: Sensor and control options are available for selection. Refer to the table on pp. 629 to 630.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9GA0812P4J001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
0.8 200 PWM duty cycle 0.8 200 13.2 V 8000
100% 12 V 7400 min-1
0.7 180 0.7 180 10.8 V 7000
160 160
0.6 140 0.6 140 0.5 1.0 1.5 2.0 2.5(m3/min) 6000
Static pressure 20 40 60 80 (CFM)
0.5 120 Static pressure0.5 120 5000
Air ow
0.4 100 Fan speed0.4 1004000

0.3 80 60% 0.3 80 3000
60 60
0.2 40 0.2 40 2000

0.1 20 25% 0.1 20 1000

00 0.5 1.0 1.5 2.0 2.5 (m3/min) 00 0 100 (%)
PWM duty cycle
0 20 40 60 80 (CFM) 0
Air ow

104 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example DC Fan 80 mm sq. DC

9GA0812P4G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
0.7 180 PWM duty cycle 0.7 180 13.2 V 7000 6800 min-1
100% 0.6 160 12 V
0.6 160 10.8 V 6000
140 140
Static pressure 0.5 120 0.5 120 Static pressure 0.5 1.0 1.5 2.0 2.5 (m3/min) 5000
0.4 100 20 40 60 80 (CFM) Fan speed
0.4 100 4000
0.3 80 Air ow
0.3 80 60% 0.2 60 3000

0.2 60 40 2000
40 0.1 20
0.1 20 25% 1000
00
0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 100 (%)
0 PWM duty cycle
0 20 40 60 80 (CFM)
Air ow

9GA0812P4H001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
0.40 100 PWM duty cycle 0.40 100 13.2 V 7000
100% 12 V
0.35 90 0.35 90 10.8 V 6000
80 60%
Static pressure 0.30 70 25% Static pressure 0.30 80 0.5 1.0 1.5 2.0 (m3/min) 5000 5200 min-1
70 10 20 30 40 50 60 70 (CFM)
0.25 60 0.5 1.0 1.5 2.0 (m3/min) 0.25 60 Fan speed 4000
10 20 30 40 50 60 70 (CFM) Air ow
0.20 50 0.20 50 3000
Air ow
0.15 40 0.15 40
30
0.10 20 0.10 30 2000

0.05 10 0.05 20 1000
10

00 00 0 100 (%)
PWM duty cycle
0 0

9GA0824P4J001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) (inch H2O) (Pa) (min-1) Voltage: 24 VDC

0.8 200 24 VDC 0.8 200 PWM duty cycle 100% 8000 PWM frequency: 25 kHz

0.7 180 PWM duty cycle 0.7 180 26.4 V 7000 7400 min-1
100% 24 V
Static pressure 0.6 160 Static pressure 0.6 160 21.6 V 6000
140 60% 140
0.5 120 0.5 120 0.5 1.0 1.5 2.0 2.5 (m3/min) Fan speed 5000
25% 20 40 60 80 (CFM)
0.4 100 0.5 1.0 1.5 2.0 2.5 (m3/min) 0.4 100 4000
Air ow
0.3 80 20 40 60 80 (CFM) 0.3 80 3000
60 Air ow 60
0.2 40 0.2 40 2000

0.1 20 0.1 20 1000

00 00 0 100 (%)
PWM duty cycle
0 0

9GA0824P4G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) (inch H2O) (Pa) (min-1) Voltage: 24 VDC

0.7 180 24 VDC 0.7 180 PWM duty cycle 100% 7000 PWM frequency: 25 kHz 6800 min-1
0.6 160
0.6 160 PWM duty cycle 26.4 V 6000
140 100% 140 24 V
Static pressure 0.5 120 0.5 120 Static pressure 21.6 V 5000
60% 0.4 100
0.4 100 25% 0.5 1.0 1.5 2.0 2.5 (m3/min) Fan speed 4000
0.5 1.0 1.5 2.0 2.5 (m3/min) 0.3 80 20 40 60 80 (CFM)
0.3 80 0.2 60 3000
20 40 60 80 (CFM) Air ow
0.2 60 Air ow 40 2000
40 0.1 20
0.1 20 1000
00
00 0 100 (%)
0 PWM duty cycle
0

105CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example
DC Fan 80 mm sq. DC

Static pressure
Static pressure
9GA0824P4H001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) (inch H2O) (Pa) (min-1) Voltage: 24 VDC

0.40 100 24 VDC 0.40 100 PWM duty cycle 100% 7000 PWM frequency: 25 kHz

0.35 90 PWM duty cycle 0.35 90 26.4 V 6000
100% 24 V
0.30 80 0.30 80 21.6 V 5000 5200 min-1
70 60% 70
0.25 60 25% 0.25 60 0.5 1.0 1.5 2.0 (m3/min) Fan speed
10 20 30 40 50 60 70 (CFM) 4000
0.20 50 0.5 1.0 1.5 2.0 (m3/min) 0.20 50
10 20 30 40 50 60 70 (CFM) Air ow 3000
0.15 40 0.15 40
Air ow
0.10 30 0.10 30 2000
20
0.05 10 0.05 20 1000
10

00 00 0 100 (%)
PWM duty cycle
0 0

■ Dimensions (unit: mm) (With ribs)

4-ø4.5±0.3
Mounting hole

80±0.5 +50
71.5±0.3 300 0

(10)

71.5±0.3 Lead wire (4) (4)
80±0.5 AWG26 25.2±0.5
UL 1007
Rotating direction Air ow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø4.5
71.5±0.3

ø90

78.5
71.5±0.3

78.5

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1002G
Finger guards
Model no.: 109-049E, 109-049H, 109-049C

Resin filter kits page: p. 592

Model no.: 109-1002F13 (13PPI), 109-1002F20 (20PPI),
109-1002F30 (30PPI), 109-1002F40 (40PPI)

106 CATALOG No. C1111B001 '21.2.IT

DC Fan DC Fan 80 mm sq. DC

80×80×25 mm

San Ace 80 9GV type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 125 g

■ Specifications

The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9GV0848P4K03 [˚C] [h]
48 43 to 53 100 0.22 10.56 5600 2.12 74.8 173.0 0.69 52
0 0.04 1.92 1500 0.57 20.1 12.4 0.05 19 -20 to +70 40000/60˚C
(70000/40˚C)

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note 1: Sensor and control options are available for selection. Refer to the table on p. 632.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9GV0848P4K03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
0.8 200 0.8 200 53 V 6000
48 V
0.6 150 43 V 5600 min-1

0.6 150 PWM duty cycle 0.4 100 5000
100%
Static pressure 0.2 50 4000
Static pressure
0.4 100 50% 3000
Fan speed
0.2 50 2000
1500 min-1
0%
1000

0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 80 (CFM) 0 20 40 60 80 (CFM)
Air ow Air ow

107CATALOG No. C1111B001 '21.2.IT

DC Fan 80 mm sq. DC ■ Dimensions (unit: mm) (With ribs)

80±0.5 4-ø4.5±0.3
71.5±0.3
Mounting hole

Lead wire
AWG26
UL 1007

3　00+300

71.5±0.3 (10)
80±0.5 (4) (4)

Rotating direction 25.2±0.5

Airflow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø4.5

71.5±0.3

ø90
78.5

71.5±0.3

78.5

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1002G
Finger guards
Model no.: 109-049E, 109-049H, 109-049C

Resin filter kits page: p. 592

Model no.: 109-1002F13 (13PPI), 109-1002F20 (20PPI),
109-1002F30 (30PPI), 109-1002F40 (40PPI)

108 CATALOG No. C1111B001 '21.2.IT

DC Fan DC Fan 80 mm sq. DC

80×80×25 mm

San Ace 80 9R type Model 109R0812E401 is not certified.

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black or Blue Sensor Yellow
· Mass………………………………………… 110 g

■ Specifications

The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
109R0805F401 [˚C] [h]
109R0805M401 5 4.5 to 5.5 0.25 1.25 2600 0.92 32.5 28.4 0.114 26
109R0812G401 10.8 to 13.2 0.17 0.85 2350 0.83 29.3 22.5 0.09 23 -20 to +70 60000/60˚C
109R0812E401 0.37 4.44 4500 1.5 53.0 80.4 0.323 40 (90000/40˚C)
109R0812S401 12 6 to 13.8 0.24 2.88 3700 1.31 46.3 57.8 0.232 35
109R0812H401 0.18 2.16 3400 1.2 42.4 48.0 0.193 34 -20 to +60 40000/60˚C
109R0812F401 7 to 13.8 0.13 1.56 2900 1.03 36.4 35.3 0.142 29 (70000/40˚C)
109R0812M401 20.4 to 26.4 0.11 1.32 2600 0.92 32.5 28.4 0.114 26
109R0812L401 0.09 1.08 2350 0.83 29.3 22.5 0.09 23 -20 to +70 60000/60˚C
24 12 to 27.6 0.06 0.72 1850 0.65 23.0 14.7 0.059 20 (90000/40˚C)
109R0824G401
14 to 27.6 0.2 4.8 4500 1.5 53.0 80.4 0.323 40 -20 to +60 40000/60˚C
109R0824S401 48 40.8 to 55.2 (70000/40˚C)
109R0824H401 0.1 2.4 3400 1.2 42.4 48.0 0.193 34
109R0824F401 0.07 1.68 2900 1.03 36.4 35.3 0.142 29 -20 to +70 60000/60˚C
109R0824M401 0.06 1.44 2600 0.92 32.5 28.4 0.114 26 (90000/40˚C)
109R0824L401 0.05 1.2 2350 0.83 29.3 22.5 0.09 23
0.04 0.96 1850 0.65 23.0 14.7 0.059 20 -20 to +60 40000/60˚C
109R0848K401 -20 to +70 (70000/40˚C)
0.1 4.8 4600 1.56 55.1 88.4 0.355 41 60000/60˚C
109R0848S401 (90000/40˚C)
0.06 2.88 3400 1.2 42.4 48.0 0.193 34

Note 1: Sensor and control options are available for selection. Refer to the table on p. 623.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics

109R0805F401 With pulse sensor 109R0805M401 With pulse sensor 109R0812G401 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.200 50 0.16 40 0.40 100
0.14
0.175 0.12 30 0.35 90 13.2 V
0.150 40 0.10 80 12 V
Static pressure 5.5 V 0.08 20 5.5 V 0.30 70 10.8 V
Static pressure5V0.065V
0.125 Static pressure300.04 100.25 60
0.100 20 4.5 V 0.02 4.5 V
0.075 0.20 50
00
0.15 40
0 30
0.050 10 0.10 20
0.025
0.05 10

00 0.5 1.0 1.5 (m3/min) 0.4 0.8 1.2 (m3/min) 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 (m3/min)
50 (CFM) 40 (CFM)
0 10 20 30 40 10 20 30 0 10 20 30 40 50 60 70 (CFM)
Air ow Air ow Air ow

109CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics
DC Fan 80 mm sq. DC
109R0812E401 With pulse sensor 109R0812S401 With pulse sensor 109R0812H401 With pulse sensor
Static pressure Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.40 100 0.30 0.200 50
70
0.35 13.8 V Static pressure 13.8 V Static pressure 0.175 13.8 V
0.30 80 12 V 0.25 60 12 V 0.150 40 12 V

0.25 60 0.20 50 6V 0.125 30 6V
0.20 0.100 20
0.15 40 0.15 40 0.075
30
0.10 20 6V 0.050 10
0.05 0.10 0.025
20
00 0.5 1.0 1.5 2.0 (m3/min) 0.5 1.0 1.5 (m3/min) 00 0.5 1.0 1.5 (m3/min)
0.05 10 50 (CFM) 50 (CFM)
0 10 20 30 40 50 60 70 (CFM) 10 20 30 40 0 10 20 30 40
Air ow 00 Air ow Air ow

0

109R0812F401 With pulse sensor 109R0812M401 With pulse sensor 109R0812L401 With pulse sensor
Operating voltage range Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.200 50 0.16 40 0.10 25
0.14 0.09
Static pressure 0.175 13.8 V Static pressure 0.12 30 13.8 V Static pressure 0.08 20 13.8 V
0.150 40 12 V 0.10 12 V 0.07 12 V
0.08 20 0.06 15 7V
0.125 30 6V 0.06 6V 0.05
0.100 20 0.04 10 0.04 10 0.2 0.4 0.6 0.8 (m3/min)
0.075 0.02 0.03 5 10 15 20 25 30 (CFM)
0.02 5
0.050 10 00 0.01 Air ow
0.025
0 00
00 0.5 1.0 1.5 (m3/min) 0.4 0.8 1.2 (m3/min)
50 (CFM) 40 (CFM) 0
0 10 20 30 40 10 20 30
Air ow Air ow

109R0824G401 With pulse sensor 109R0824S401 With pulse sensor 109R0824H401 With pulse sensor
Operating voltage range Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) 27.6 V (inch H2O) (Pa)
24 V
0.40 100 0.30 0.200 50
70
0.35 90 26.4 V 0.175
80 24 V 0.25 60 0.150 40
Static pressure 0.30 70 20.4 V Static pressure Static pressure 27.6 V
0.20 50 24 V

0.25 60 0.15 40 0.125 30 12 V
30 0.100 20
0.20 50 12 V 0.075
0.10
0.15 40 20
30
0.10 20 0.05 10 0.050 10
0.025
0.05 10

0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 (m3/min) 00 0.5 1.0 1.5 (m3/min) 00 0.5 1.0 1.5 (m3/min)
50 (CFM)
0 10 20 30 40 50 60 70 (CFM) 0 10 20 30 40 50 (CFM) 0 10 20 30 40
Air ow Air ow Air ow

109R0824F401 With pulse sensor 109R0824M401 With pulse sensor 109R0824L401 With pulse sensor

Operating voltage range Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.200 50 0.16 40 0.10 25
0.14 0.09
Static pressure 0.175 27.6 V Static pressure 0.12 30 27.6 V Static pressure 0.08 20 27.6 V
0.150 40 24 V 0.10 24 V 0.07 24 V
0.08 20 0.06 15 14 V
0.125 30 12 V 0.06 12 V 0.05
0.100 20 0.04 10 0.04 10 0.2 0.4 0.6 0.8 (m3/min)
0.075 0.02 0.03 5 10 15 20 25 30 (CFM)
0.02 5
0.050 10 00 0.01 Air ow
0.025
0 00
00 0.5 1.0 1.5 (m3/min) 0.4 0.8 1.2 (m3/min)
50 (CFM) 40 (CFM) 0
0 10 20 30 40 10 20 30
Air ow Air ow

110 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics DC Fan 80 mm sq. DC

109R0848K401 With pulse sensor 109R0848S401 With pulse sensor

Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) 55.2 V
48 V
0.45 110 0.30
70 40.8 V
0.40 100
0.25 60
0.35 90 55.2 V
Static pressure 80 48 V 0.20 50
Static pressure0.307040.8 V0.15 40

0.25 60 0.5 1.0 1.5 2.0 (m3/min) 30
0.20 50 10 20 30 40 50 60 70 (CFM) 0.10

0.15 40 Air ow 20
30 0.05 10
0.10 20
0.05 10 00

00 0 0.5 1.0 1.5 (m3/min)
50 (CFM)
0 10 20 30 40
Air ow

■ Dimensions (unit: mm) (With ribs)

80±0.5 4-ø4.3±0.3 25±0.5
71.5±0.3
Mounting hole (3) (3)

80±0.5 Lead wire
71.5±0.3 AWG24
UL 1007

+30
300 0

(10)

Rotating direction Airflow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø4.5

71.5±0.3

ø90
78.5

71.5±0.3

78.5

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1002G
Finger guards
Model no.: 109-049E, 109-049H, 109-049C

Resin filter kits page: p. 592

Model no.: 109-1002F13 (13PPI), 109-1002F20 (20PPI),
109-1002F30 (30PPI), 109-1002F40 (40PPI)

111CATALOG No. C1111B001 '21.2.IT

DC Fan 80 mm sq. DC DC Fan

80×80×25 mm

San Ace 80 9S type Silent Fan Model 9S0812H401 is notTÜV certified.

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow
· Mass………………………………………… 75 g

■ Specifications

The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
9S0812H401 [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9S0812F401 5.0 to 13.2
9S0812M401 0.23 2.76 3400 1.12 39.5 52.15 0.2 31
9S0812L401 12 5.0 to 13.8 0.11 1.32 2800 0.93 32.8 35.5 0.143 24 40000/60˚C
9S0824M401 0.08 0.96 2500 0.83 29.3 27.5 0.11 22 (70000/40˚C)
9S0824L401 6.0 to 13.8 0.05 0.6 2000 0.66 23.3 18.1 0.073 16 -10 to +70
0.06 1.44 2500 0.83 29.3 27.5 0.11 22
24 10 to 26.4 0.04 0.96 2000 0.66 23.3 18.1 0.073 16

Note 1: Sensor and control options are available for selection. Refer to the table on p. 636.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics

9S0812H401 With pulse sensor 9S0812F401 With pulse sensor 9S0812M401 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range
(inch H2O) (Pa)
(inch H2O) (Pa) (inch H2O) (Pa)
0.20 50
70 0.20 50

0.25 60 0.15 40 0.15 40

0.20 50Static pressure 13.2 V 30 13.8 V 30 13.8 V
Static pressure12 V0.10 12 V 0.10 12 V
0.15 40 Static pressure5V
30 5V 20 20

0.10 0.05 10 0.05 10 5V
20

0.05 10

0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 (m3/min) 0 0 0.2 0.4 0.6 0.8 1.0 1.2 (m3/min) 0 0 0.2 0.4 0.6 0.8 1.0 (m3/min)

0 10 20 30 40 50 (CFM) 0 5 10 15 20 25 30 35 40 (CFM) 0 5 10 15 20 25 30 35 (CFM)
Air ow Air ow Air ow

112 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics Static pressure

9S0812L401 With pulse sensor 9S0824M401 With pulse sensor DC Fan 80 mm sq. DC9S0824L401 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range
(inch H2O) (Pa)
(inch H2O) (Pa) (inch H2O) (Pa)
0.20 50
0.20 50 0.20 50

Static pressure 0.15 40 13.8 V Static pressure 0.15 40 26.4 V 0.15 40 26.4 V
12 V 24 V 24 V
30 6V 30 30 10 V
0.10 0.10 0.10

20 20 20

0.05 10 0.05 10 10 V 0.05 10

0 0 0.2 0.4 0.6 0.8 1.0 (m3/min) 0 0 0.2 0.4 0.6 0.8 1.0 (m3/min) 0 0 0.2 0.4 0.6 0.8 1.0 (m3/min)

0 5 10 15 20 25 30 35 (CFM) 0 5 10 15 20 25 30 35 (CFM) 0 5 10 15 20 25 30 35 (CFM)
Air ow Air ow Air ow

■ Dimensions (unit: mm) (With ribs) 25±0.5

4-ø4.3±0.3 (4) (4)

Mounting hole

80±0.5 Lead wire
71.5±0.3 AWG24
UL 1007

+50
300 0

(10)

71.5±0.3 Air ow direction
80±0.5

Rotating direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø4.5

71.5±0.3

78.5

ø90
71.5±0.3

78.5

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1002G
Finger guards
Model no.: 109-049E, 109-049H, 109-049C

Resin filter kits page: p. 592

Model no.: 109-1002F13 (13PPI), 109-1002F20 (20PPI),
109-1002F30 (30PPI), 109-1002F40 (40PPI)

113CATALOG No. C1111B001 '21.2.IT

DC Fan 80 mm sq. DC DC Fan

80×80×25 mm

San Cooler 80 9A type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black or Blue Sensor Yellow
· Mass………………………………………… 90 g

■ Specifications

The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9A0812G401 [˚C] [h]
6 to 13.2 0.38 4.56 4500 1.5 53.0 80.3 0.323 40
9A0812S401 -20 to +60 30000/60˚C
9A0812H401 12 6 to 13.8 0.18 2.16 3400 1.2 42.4 48 0.193 34 (53000/40˚C)
9A0812F401 0.13 1.56 2900 1.03 36.4 35.3 0.142 29
9A0812M401 7 to 13.8 0.11 1.32 2600 0.92 32.5 28.4 0.114 26 -20 to +70 40000/60˚C
9A0812L401 12 to 26.4 0.09 1.08 2350 0.83 29.3 22.5 0.09 23 (70000/40˚C)
0.06 0.72 1850 0.65 23.0 14.7 0.059 20
9A0824G401 24 12 to 27.6 -20 to +60 30000/60˚C
0.21 5.04 4500 1.5 53.0 80.3 0.323 40 (53000/40˚C)
9A0824S401 14 to 27.6
9A0824H401 0.1 2.4 3400 1.2 42.4 48 0.193 34 -20 to +70 40000/60˚C
9A0824F401 0.07 1.68 2900 1.03 36.4 35.3 0.142 29 (70000/40˚C)
9A0824M401 0.06 1.44 2600 0.92 32.5 28.4 0.114 26
9A0824L401 0.05 1.2 2350 0.83 29.3 22.5 0.09 23
0.04 0.96 1850 0.65 23.0 14.7 0.059 20

Note 1: Sensor and control options are available for selection. Refer to the table on p. 624.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics

9A0812G401 With pulse sensor 9A0812S401 With pulse sensor 9A0812H401 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.40 100 0.30 0.20 50
70
0.35 90 0.15 40
80 0.25 60
0.30 70 30
Static pressure 0.20 50 0.10 13.8 V
0.25 60 Static pressure13.2 V0.15 4013.8 V
Static pressure12 V12 V 20 12 V
0.20 50 30 6V
0.10 6V 0.05 10
0.15 40
30 20
0.10 20 6V 0.05 10

0.05 10 00

0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 (m3/min) 0 0.5 1.0 1.5 (m3/min) 00 0.5 1.0 1.5 (m3/min)
50 (CFM)
0 10 20 30 40 50 60 70 (CFM) 10 20 30 40 0 10 20 30 40 50 (CFM)
Air ow Air ow Air ow

114 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics DC Fan 80 mm sq. DC

9A0812F401 With pulse sensor 9A0812M401 With pulse sensor 9A0812L401 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range
(inch H2O) (Pa)
(inch H2O) (Pa) (inch H2O) (Pa) 13.8 V
0.10
0.16 40 0.12 30 12 V
0.14 0.10 6V 0.08 20
Static pressure 0.12 30 Static pressure 0.08 20 Static pressure
0.10 13.8 V 0.06 0.06 13.8 V
0.08 20 12 V 0.04 10 0.04 10 12 V
0.06 0.02 0.02
0.04 10 6V 7V
0.02 00
0.5 1.0 1.5 (m3/min) 0 0.5 1.0 (m3/min) 00 0.5 1.0 (m3/min)
00 50 (CFM) 30 40 (CFM) 0 30 40 (CFM)
10 20 30 40 10 20 10 20
0 Air ow Air ow Air ow

9A0824G401 With pulse sensor 9A0824S401 With pulse sensor 9A0824H401 With pulse sensor
Operating voltage range Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.40 100 0.30 0.20 50
70
0.35 90 0.15 40
80 0.25 60
Static pressure 0.30 70 Static pressure Static pressure 30 27.6 V
0.20 50 0.10
0.25 60 26.4 V 0.15 40 27.6 V 24 V
24 V 24 V 20 12 V
0.20 50 30
0.10 12 V 0.05 10
0.15 40
30 20
0.10 20 12 V 0.05 10

0.05 10 00

0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 (m3/min) 0 0.5 1.0 1.5 (m3/min) 00 0.5 1.0 1.5 (m3/min)
50 (CFM)
0 10 20 30 40 50 60 70 (CFM) 10 20 30 40 0 10 20 30 40 50 (CFM)
Air ow Air ow Air ow

9A0824F401 With pulse sensor 9A0824M401 With pulse sensor 9A0824L401 With pulse sensor
Operating voltage range Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.16 40 0.12 30 0.10
0.14 0.10
Static pressure 0.12 30 Static pressure 0.08 20 27.6 V Static pressure 0.08 20
0.10 0.06
0.08 20 27.6 V 0.04 10 24 V 0.06 27.6 V
0.06 24 V 0.02 12 V 0.04 10 24 V
0.04 10 0.02
0.02 12 V 00 14 V
0 00
00 0.5 1.0 1.5 (m3/min) 0.5 1.0 (m3/min) 0 0.5 1.0 (m3/min)
50 (CFM) 30 40 (CFM) 30 40 (CFM)
0 10 20 30 40 10 20 10 20
Air ow Air ow Air ow

■ Dimensions (unit: mm) (With ribs)

80±0.5 4-ø4.3±0.3 25±0.5
71.5±0.3
Mounting hole (4) (4)

80±0.5 Lead wire
71.5±0.3 AWG24
UL 1007
+50
300 0

(10)

Rotating direction Airflow direction

115CATALOG No. C1111B001 '21.2.IT

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)
DC Fan 80 mm sq. DC
Inlet side, Outlet side 4-ø4.5
78.5
71.5±0.3
71.5±0.3
ø90

78.5

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1002G
Finger guards
Model no.: 109-049E, 109-049H, 109-049C

Resin filter kits page: p. 592

Model no.: 109-1002F13 (13PPI), 109-1002F20 (20PPI),
109-1002F30 (30PPI), 109-1002F40 (40PPI)

116 CATALOG No. C1111B001 '21.2.IT

DC Fan DC Fan 80 mm sq. DC

80×80×32 mm

San Ace 80 9GA type Low Power Consumption Fan

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown

(For models without PWM control function, there is no speed control wiring.)
· Mass………………………………………… 130 g

■ Specifications

The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
9GA0812P2S001 cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9GA0812P2H001 10.2 to 13.8 -20 to +70
9GA0812P2M001 12 100 0.83 9.96 9700 2.45 86.5 360 1.45 57
9GA0824P2S001 0 0.08 0.96 2800 0.71 25.1 30 0.12 24 -20 to +55 40000/60˚C
9GA0848P2S001 10.2 to 12.6 0.59 7.08 8700 2.2 77.7 294 1.18 54 (70000/40˚C)
100 0.05 0.6 2600 0.66 23.3 26 0.105 21
24 20.4 to 27.6 0 0.35 4.2 6700 1.69 59.6 171 0.68 47 -20 to +70
0.04 0.48 1400 0.35 12.3 7.5 0.03 10
48 40.8 to 55.2 100 0.42 10.1 9700 2.45 86.5 360 1.45 57 -10 to +70
0 0.05 1.2 2800 0.71 25.1 30 0.12 24
0.22 10.56 9700 2.45 86.5 360 1.45 57
100 0.04 1.92 2800 0.71 25.1 30 0.12 24
0

100
0

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [˚C] [h]
9GA0812A2001 [V] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9GA0812B2001 12 -20 to +70 40000/60˚C
9GA0812L2001 6 to 13.2 0.31 3.72 6000 1.51 53.4 137.7 0.55 44 (70000/40˚C)
9GA0824A2001 24 6 to 13.8 0.13 1.56 4000 1.01 35.7 61.2 0.25 33
9GA0824B2001 7 to 13.8 0.08 0.96 2600 0.66 23.3 26 0.1 21
9GA0824L2001 12 to 26.4 0.15 3.6 6000 1.51 53.4 137.7 0.55 44
12 to 27.6 0.08 1.92 4000 1.01 35.7 61.2 0.25 33
14 to 27.6 0.05 1.2 2600 0.66 23.3 26 0.1 21

Note 1: Sensor and control options are available for selection. Refer to the table on pp. 629 to 630.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

117CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example
DC Fan 80 mm sq. DC
9GA0812P2S001 With pulse sensor with PWM control function
Static pressure
PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC 9700 min-1
PWM frequency: 25 kHz
2.0 500 PWM duty cycle Static pressure 2.0 500 13.8 V Fan speed 10000
1.8 100% 1.8 12 V 9000 2800 min-1
1.6 400 1.6 400 8000
1.4 50% 1.4 10.2 V 7000
1.2 300 0% 1.2 300 6000
1.0 1.0 12 5000
0.8 200 1 2 3 (m3/min) 0.8 200 4000
0.6 20 40 60 80 100 (CFM) 0.6 20 40 60 80 3000
0.4 100 0.4 100 Air ow 2000
0.2 Air ow 0.2 1000

00 00 3 (m3/min) 0 100 (%)
100 (CFM) PWM duty cycle
0 0

9GA0812P2H001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC 8700 min-1
PWM frequency: 25 kHz
Static pressure 2.0 500 PWM duty cycle Static pressure 2.0 500 13.8 V Fan speed 10000
1.8 100% 1.8 12 V 9000 2600 min-1
1.6 400 1.6 400 10.2 V 8000
1.4 50% 1.4 7000
1.2 300 0% 1.2 300 1 2 3 (m3/min) 6000
1.0 1 2 3 (m3/min) 1.0 20 40 60 80 100 (CFM) 5000
0.8 200 20 40 60 80 100 (CFM) 0.8 200 4000
0.6 0.6 Air ow 3000
0.4 100 Air ow 0.4 100 2000
0.2 0.2 1000

00 00 0 100 (%)
PWM duty cycle
0 0

9GA0812P2M001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
0.8 200 0.8 200 10000
9000 1400 min-1
Static pressure 0.6 150 PWM duty cycle Static pressure 0.6 150 12.6 V Fan speed 8000 6700 min-1
0.4 100 100% 0.4 100 7000
0.2 50 50% 0.2 50 12 V 6000
10.2 V 5000
4000
0% 3000
2000
00 1000

00 1 2 (m3/min) 1 2 (m3/min) 0 100 (%)
PWM duty cycle
0 10 20 30 40 50 60 70 (CFM) 0 10 20 30 40 50 60 70 (CFM)
Air ow
Air ow

9GA0824P2S001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC 9700 min-1
PWM frequency: 25 kHz
Static pressure 2.0 500 PWM duty cycle Static pressure 2.0 500 27.6 V Fan speed 10000
1.8 100% 1.8 24 V 9000 2800 min-1
1.6 400 1.6 400 8000
1.4 50% 1.4 20.4 V 7000
1.2 300 0% 1.2 300 6000
1.0 1.0 12 5000
0.8 200 1 2 3 (m3/min) 0.8 200 4000
0.6 20 40 60 80 100 (CFM) 0.6 20 40 60 80 3000
0.4 100 0.4 100 Air ow 2000
0.2 Air ow 0.2 1000

00 00 3 (m3/min) 0 100 (%)
100 (CFM) PWM duty cycle
0 0

118 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example DC Fan 80 mm sq. DC

9GA0848P2S001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC 9700 min-1
PWM frequency: 25 kHz
2.0 500 PWM duty cycle 2.0 500 55.2 V 10000
1.8 100% 1.8 48 V
Static pressure 1.6 400 1.6 400 Static pressure 40.8 V 9000
1.4 50% 1.4 8000
1.2 300 0% 1.2 300 1 2 3 (m3/min)
1.0 1.0 20 40 60 80 100 (CFM) Fan speed 7000
0.8 200 1 2 3 (m3/min) 0.8 200
0.6 20 40 60 80 100 (CFM) 0.6 Air ow 6000
0.4 100 0.4 100
0.2 Air ow 0.2 5000

00 00 4000

0 0 3000
2000 2800 min-1

1000

0 100 (%)
PWM duty cycle

■ Airflow - Static Pressure Characteristics

9GA0812A2001 With pulse sensor 9GA0812B2001 With pulse sensor 9GA0812L2001 With pulse sensor
Operating voltage range Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.8 200 0.35 90 0.16 40
0.14
Static pressure 0.6 150 13.2 V Static pressure 0.30 75 13.8 V Static pressure 0.12 30 13.8 V
0.4 100 12 V 0.10
0.25 60 12 V 0.08 20 12 V
0.2 50 6V 0.20 45 6V 0.06
0.15 0.04 10 7V
00 0.5 1.0 1.5 2.0 (m3/min) 0.10 30 0.5 1.0 1.5 (m3/min) 0.02
0.05 15 10 20 30 40 50 (CFM) 0.25 0.5 0.75 1.0 (m3/min)
0 10 20 30 40 50 60 70 (CFM) 00 10 20 30 (CFM)
00 Air ow 0 Air ow
0

Air ow

9GA0824A2001 With pulse sensor 9GA0824B2001 With pulse sensor 9GA0824L2001 With pulse sensor
Operating voltage range Operating voltage range Operating voltage range

Static pressure(inch H2O) (Pa) 26.4 V Static pressure(inch H2O) (Pa) 27.6 V Static pressure(inch H2O) (Pa) 27.6 V
24 V 24 V
0.8 200 0.35 90 0.16 40 24 V
0.6 150 12 V 0.14
0.4 100 0.30 75 0.12 30 14 V
0.5 1.0 0.10
0.2 50 12 V 0.25 60 10 20 30 40 0.08 20 0.25 0.5 0.75 1.0 (m3/min)
0.20 45 0.06 10 20 30 (CFM)
00 0.5 1.0 1.5 2.0 (m3/min) 0.15 Air ow 1.5 (m3/min) 0.04 10 Air ow
0.10 30 50 (CFM) 0.02
0 10 20 30 40 50 60 70 (CFM) 0.05 15
00
00 0
0

Air ow

119CATALOG No. C1111B001 '21.2.IT

DC Fan 80 mm sq. DC ■ Dimensions (unit: mm) (Ribbed frame with pulse sensor with PWM control function)

80±0.5 4-ø4.5±0.3
71.5±0.3 Mounting hole

Lead wire
AWG26
UL 1430

+50
300 0

(10)

(4) (4)
32±0.5
71.5±0.3
80±0.5 Air ow direction

Rotating direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø4.5

71.5±0.3

ø90
78.5

71.5±0.3

78.5

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1002G
Finger guards
Model no.: 109-049E, 109-049H, 109-049C

Resin filter kits page: p. 592

Model no.: 109-1002F13 (13PPI), 109-1002F20 (20PPI),
109-1002F30 (30PPI), 109-1002F40 (40PPI)

120 CATALOG No. C1111B001 '21.2.IT

DC Fan DC Fan 80 mm sq. DC

80×80×38 mm

San Ace 80 9HVB type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 230 g

■ Specifications

The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9HVB0812P1G001 [˚C] [h]
12 10.8 to 12.6 100 4.8 57.6 18300 4.0 141.3 1600 6.42 75
20 0.17 2.0 4300 0.94 33.2 105 0.42 40 -20 to +70 40000/60˚C
(70000/40˚C)

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note: Sensor and control options are available for selection. Refer to the table on p. 634.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9HVB0812P1G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
8 2000 PWM duty cycle 8 2000 12.6 V 20000
100% 12 V 18000 18300 min-1
6 1600 6 1600 16000
50% 1200 10.8 V 14000
1200 20% 12000
4 Static pressure 4 Speed 10000
Static pressure 800 8000
800 6000
2 400 4000
2 400 2000

00 1 2 3 4 5 (m3/min) 0 0 1 2 3 4 5 (m3/min) 0 100 (%)
PWM duty cycle
0 50 100 150 (CFM) 0 50 100 150 (CFM)
Air ow
Air ow

■ Dimensions (unit: mm) (With ribs)

4-ø4.5±0.3 80±0.5 38±0.5
Mounting hole 71.5±0.3 (4) (4)

80±0.5 +50
71.5±0.3 300 0

(10)

Lead wire
AWG 20
UL 3266

Rotating direction Air ow direction

121CATALOG No. C1111B001 '21.2.IT

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)
DC Fan 80 mm sq. DC
Inlet side 4-ø4.5 Outlet side 4-ø4.5
78.571.5±0.3 71.5±0.3
ø86
ø90
71.5±0.3
78.5

71.5±0.3

78.5 78.5

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1002G
Finger guards
Model no.: 109-049E, 109-049H, 109-049C

Resin filter kits page: p. 592

Model no.: 109-1002F13 (13PPI), 109-1002F20 (20PPI),
109-1002F30 (30PPI), 109-1002F40 (40PPI)

122 CATALOG No. C1111B001 '21.2.IT

DC Fan DC Fan 80 mm sq. DC

80×80×38 mm

San Ace 80 9HVA type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 220 g

■ Specifications

The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
9HVA0812P1G001
9HVA0848P1G601 12 10.8 to 13.2 100 3.5 42 16100 3.75 132 1350 5.4 73 -20 to +70 40000/60˚C
20 0.2 2.4 4200 0.96 33.9 105 0.42 44 (70000/40˚C)
48 36 to 57 100 0.9 43.2 16100 3.75 132 1250 5.0 73
20 0.07 3.36 4200 0.96 33.9 105 0.42 44

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note:The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9HVA0812P1G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
1400 PWM duty cycle 1400 13.2 V 18000
5 1200 100% 12 V
5 1200 16000 16100 min-1
4 1000
Static pressure 4 1000 14000
Static pressure
3 800 10.8 V 12000
Fan speed600
3 800 10000
600 2
400 8000
2
400 60% 1 200 6000
20%
1 200 4000

2000

00 1 2 3 4 (m3/min) 00 1 2 3 4 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 80 100 120 140 (CFM) 0 20 40 60 80 100 120 140 (CFM)
Air ow Air ow

123CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example
DC Fan 80 mm sq. DC

Static pressure
Static pressure

Fan speed
9HVA0848P1G601 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
1400 PWM duty cycle 1400 48 V/57 V 18000
100% 5 1200 36 V 16000 16100 min-1
5 1200 14000
4 1000 12000
4 1000 10000
3 800 8000
3 800 60% 600 6000
600 20% 4000
2 2000
2 400
400
1 200
1 200

00 1 2 3 4 (m3/min) 00 1 2 3 4 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 80 100 120 140 (CFM) 0 20 40 60 80 100 120 140 (CFM)

Air ow Air ow

■ Dimensions (unit: mm) (With ribs)

4-ø4.5±0.3

Mounting hole

80±0.5 Lead wire
71.5±0.3 AWG22
UL 3266

+50
300 0

71.5±0.3 (10)
80±0.5 (4) (4)

Rotating direction 38±0.5

Air ow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø4.5

71.5±0.3

ø90
78.5

71.5±0.3

78.5

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1002G
Finger guards
Model no.: 109-049E, 109-049H, 109-049C

Resin filter kits page: p. 592

Model no.: 109-1002F13 (13PPI), 109-1002F20 (20PPI),
109-1002F30 (30PPI), 109-1002F40 (40PPI)

124 CATALOG No. C1111B001 '21.2.IT

DC Fan DC Fan 80 mm sq. DC

80×80×38 mm

San Ace 80 9HV type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 230 g

■ Specifications

The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [˚C] [h]
9HV0812P1G601 [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9HV0824P1G003 12 10.8 to 13.2 100 -20 to +70 40000/60˚C
9HV0848P1G001 24 21.6 to 26.4 0 3.4 40.8 14900 3.7 130.7 1000 4.0 69 -10 to +70 (70000/40˚C)
48 36 to 57 0.25 3 4400 1.06 37.5 87.2 0.35 40
100 1.7 40.8 14900 3.7 130.7 69
100 0.85 40.8 14900 3.7 130.7 1000 4.0 69
0.13 6.24 4400 1.06 37.5 1000 4.0 40
0
87.2 0.35

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note 1: The model number of the ribless model for 9HV0824P1G003 is 9HV0824P1G0011.
Note 2: Sensor and control options are available for selection. Refer to the table on p. 633.

Note 3: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9HV0812P1G601 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
1200 PWM duty cycle 1200 13.2 V 16000
4.5 100% 4.5 12 V 14900 min-1
4.0 1000 10.8 V 14000
50% 4.0 1000
1 2 3 4 (m3/min)
3.5Static pressure8000% 3.5 800 20 40 60 80 100 120 140(CFM) 12000
3.0 Static pressure1 2 3 4 (m3/min)3.0
20 40 60 80 100 120 140 (CFM) Air ow 10000
Fan speed
2.5 600 Air ow 2.5 600 8000
2.0
2.0 1.5 400 6000
1.5 400
4000 4400 min-1
1.0 200 1.0 200
0.5 0.5 2000

00 00 0 100 (%)
PWM duty cycle
0 0

125CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example
DC Fan 80 mm sq. DC
9HV0824P1G003 With pulse sensor with PWM control function
Static pressure
PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
1200 PWM duty cycle 1200 26.4 V 16000
4.5 100% 4.5 24 V
21.6 V 14000 14900 min-1
4.0 1000 50% 4.0 1000
1 2 3 4 (m3/min) 12000
3.5 800 1 2 3 4 (m3/min) Static pressure 3.5 800 20 40 60 80 100 120 140 (CFM)
3.0 20 40 60 80 100 120 140 (CFM) 3.0 Fan speed 10000
Air ow
2.5 600 Air ow 2.5 600 8000
2.0 2.0
1.5 400 1.5 400 6000

1.0 200 1.0 200 4000
0.5 0.5
2000

00 00 0 100 (%)
PWM duty cycle
0 0

9HV0848P1G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
1200 PWM duty cycle 1200 57 V 16000
4.5 100% 4.5 48 V 14900 min-1
4.0 1000 36 V 14000
3.5 50% 4.0 1000
3.0 800 1 2 3 4 (m3/min) 12000
Static pressure 2.5 600 0% Static pressure 3.5 800 20 40 60 80 100 120 140 (CFM)
2.0 1 2 3 4 (m3/min) 3.0 Fan speed 10000
1.5 400 20 40 60 80 100 120 140 (CFM) Air ow
1.0 200 2.5 600 8000
0.5 Air ow
2.0 6000
00 1.5 400
4000 4400 min-1
0 1.0 200
0.5 2000

00 0 100 (%)
PWM duty cycle
0

■ Dimensions (unit: mm) (With ribs) (4) 38±0.5 (4)

4-ø4.5±0.3

Mounting hole

80±0.5 +50
71.5±0.3 300 0

71.5±0.3 (10)
80±0.5
Lead wire
Rotating direction AWG22
UL 1430

Air ow direction

126 CATALOG No. C1111B001 '21.2.IT

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)
78.5
Inlet side 4-ø4.5 Outlet side 4-ø4.5
ø83
71.5±0.371.5±0.371.5±0.3

78.5

ø90
71.5±0.3

DC Fan 80 mm sq. DC

78.5 78.5

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1002G
Finger guards
Model no.: 109-049E, 109-049H, 109-049C

Resin filter kits page: p. 592

Model no.: 109-1002F13 (13PPI), 109-1002F20 (20PPI),
109-1002F30 (30PPI), 109-1002F40 (40PPI)

127CATALOG No. C1111B001 '21.2.IT

DC Fan 80 mm sq. DC DC Fan

80×80×38 mm

San Ace 80 9GA type Low Power Consumption Fan

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 160 g

■ Specifications

The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
9GA0812P1G61 cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9GA0812P1S61 12 10.8 to 13.2 -20 to +70 40000/60˚C
9GA0812P1H61 100 1.2 14.4 10500 2.85 100.6 480 1.93 60 (70000/40˚C)
9GA0824P1S61 24 20.4 to 27.6 0 0.04 0.48 2000 0.51 18.0 28.7 0.11 21
9GA0824P1H61 48 40.8 to 55.2 0.94 11.28 9550 2.6 91.8 480 1.93 59
9GA0848P1S61 100 0.1 1.2 2900 0.74 26.1 60 0.24 27
0 0.6 7.2 8250 2.25 79.4 380 1.53 55
0.08 0.96 2500 0.64 22.6 45 0.18 24
100 0.47 11.28 9550 2.6 91.8 480 1.93 59
0 0.06 1.44 2900 0.74 26.1 60 0.24 27
0.3 7.2 8250 2.25 79.4 380 1.53 55
100 0.05 1.2 2500 0.64 22.6 45 0.18 24
0 0.25 12 9550 2.6 91.8 480 1.93 59
0.04 1.92 2900 0.74 26.1 60 0.24 27
100
0

100
0

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note 1: Sensor and control options are available for selection. Refer to the table on pp. 629 to 630.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9GA0812P1G61 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% Voltage: 12 VDC 10500 min-1

2.4 600 Static pressurePWM duty cycle 2.4 600 13.2 V (min-1) PWM frequency: 25 kHz
2.2 Static pressure100%2.212 V
2.0 500 2.0 500 10.8 V 11000
1.8 Fan speed50%1.810000
1.6 400 0% 1.6 400 1 2 3 (m3/min) 9000
1.4 1.4 20 40 60 80 100 (CFM) 8000
1.2 300 1 2 3 (m3/min) 1.2 300 7000
1.0 20 40 60 80 100 (CFM) 1.0 Air ow 6000
0.8 200 0.8 200 5000
0.6 Air ow 0.6 4000
0.4 100 0.4 100 3000
0.2 0.2 2000 2000 min-1
1000
00 00
0 100 (%)
0 0 PWM duty cycle

128 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example DC Fan 80 mm sq. DC

9GA0812P1S61 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
2.4 600 PWM duty cycle 2.4 600 13.2 V 10000
2.2 100% 2.2 12 V 9550 min-1
2.0 500 2.0 500
1.8 50% 1.8 Static pressure 10.8 V 8000
1.6 400 0% 1.6 400
1.4 Static pressure 1.4 1 2 3 (m3/min) Fan speed 6000
1.2 300 1 2 3 (m3/min) 1.2 300 20 40 60 80 100 (CFM)
1.0 20 40 60 80 100 (CFM) 1.0 4000
0.8 200 0.8 200 Air ow 2900 min-1
0.6 Air ow 0.6
0.4 100 0.4 100 2000
0.2 0.2
0 100 (%)
00 00 PWM duty cycle
0
0

9GA0812P1H61 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
2.0 500 2.0 500 13.2 V 10000
1.8 12 V
1.8 1.6 400 8000 8250 min-1
1.4 10.8 V
Static pressure 1.6 400 PWM duty cycle 1.2 300 Static pressure Fan speed 6000
1.4 100% 1.0 1 2 3 (m3/min)
1.2 300 0.8 200 20 40 60 80 100 (CFM)
0.6
1.0 0.4 100 Air ow
0.2
0.8 200 4000
00 2000 2500 min-1
0.6 50%
0
0.4 100 0%
0.2

00 1 2 3 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 80 100 (CFM)
Air ow

9GA0824P1S61 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
2.4 600 PWM duty cycle 2.4 600 27.6 V 10000
2.2 100% 2.2 24 V 9550 min-1
2.0 500 2.0 500 20.4 V
1.8 Static pressure 50% 1.8 Static pressure 8000
1.6 400 0% 1.6 400 1 2 3 (m3/min)
1.4 1.4 20 40 60 80 100 (CFM) Fan speed 6000
1.2 300 1 2 3 (m3/min) 1.2 300
1.0 20 40 60 80 100 (CFM) 1.0 Air ow 4000
0.8 200 0.8 200 2900 min-1
0.6 Air ow 0.6
0.4 100 0.4 100 2000
0.2 0.2
0 100 (%)
00 00 PWM duty cycle

0 0

9GA0824P1H61 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
2.0 500 2.0 500 27.6 V 10000
1.8 24 V
1.8 1.6 400 20.4 V 8000 8250 min-1
1.4
Static pressure 1.6 400 PWM duty cycle 1.2 300 Static pressure 1 2 3 (m3/min) Fan speed 6000
100% 1.0 20 40 60 80 100 (CFM)
1.4 0.8 200
1.2 300 0.6 Air ow
0.4 100
1.0 0.2

0.8 200 50% 00 4000
0.6 2000 2500 min-1
0
0.4 100 0%
0.2

00 1 2 3 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 80 100 (CFM)

Air ow

129CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example
DC Fan 80 mm sq. DC
9GA0848P1S61 With pulse sensor with PWM control function
Static pressure
PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
2.4 600 PWM duty cycle 2.4 600 55.2 V 10000
2.2 100% 2.2 48 V 9550 min-1
2.0 500 2.0 500 40.8 V
1.8 50% 1.8 Static pressure 8000
1.6 400 0% 1.6 400 1 2 3 (m3/min)
1.4 1.4 20 40 60 80 100 (CFM) Fan speed 6000
1.2 300 1 2 3 (m3/min) 1.2 300
1.0 20 40 60 80 100 (CFM) 1.0 Air ow 4000
0.8 200 0.8 200 2900 min-1
0.6 Air ow 0.6
0.4 100 0.4 100 2000
0.2 0.2
0 100 (%)
00 00 PWM duty cycle

0 0

■ Dimensions (unit: mm) (With ribs)

4-ø4.5±0.3
Mounting hole

80±0.5 +50
71.5±0.3 300　0

71.5±0.3 (10) (4) (4)
80±0.5 38±0.5
Lead wire
AWG26
UL 1430

Rotating direction Air ow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side
4-ø4.5

ø90

78.5
71.5±0.3

71.5±0.3
78.5

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1002G
Finger guards
Model no.: 109-049E, 109-049H, 109-049C

Resin filter kits page: p. 592

Model no.: 109-1002F13 (13PPI), 109-1002F20 (20PPI),
109-1002F30 (30PPI), 109-1002F40 (40PPI)

130 CATALOG No. C1111B001 '21.2.IT

DC Fan DC Fan 80 mm sq. DC

80×80×38 mm

San Ace 80 9GV type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 220 g

■ Specifications

The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
9GV0812P1G03 cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9GV0812P1H03 10.8 to 13.2 -20 to +70 40000/60˚C
9GV0812P1F03 12 100 3.8 45.6 10200 3.9 138.0 490.0 1.97 65 (70000/40˚C)
9GV0812P1M03 0 0.32 3.84 3000 1.15 40.6 42.4 0.17 34
9GV0824P1G03 10.2 to 13.8 3.0 36.0 9700 3.7 131.0 440.0 1.77 63
9GV0848P1G03 100 0.2 2.4 2900 1.11 39.2 39.0 0.16 34
24 20.4 to 27.6 0 1.5 18 8000 3.05 108.0 301.0 1.21 58
48 40.8 to 55.2 0.12 1.44 2400 0.92 32.0 27.1 0.11 26
100 0.75 9 6000 2.29 81.0 169.0 0.68 51
0 0.09 1.08 1700 0.65 23.0 13.6 0.05 19
1.6 38.4 10200 3.9 138.0 490.0 1.97 65
100 0.3 7.2 4700 1.79 63.2 104.0 0.41 44
0 0.84 40.32 10200 3.9 138.0 490.0 1.97 65
0.15 7.2 4700 1.79 63.2 104.0 0.41 44
100
0

100
0

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note: Sensor and control options are available for selection. Refer to the table on p. 632.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9GV0812P1G03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
2.4 600 2.4 600 11000 10200 min-1
10000 3000 min-1
2.0 500 PWM duty cycle 2.0 500 13.2 V 9000
1.6 400 100% 1.6 400 12 V 8000
Static pressure 1.2 300 10.8 V 7000
1.2 300 Static pressure 6000
0.8 200 50% 5000
Fan speed 4000
0.8 200 3000
2000
0.4 100 0% 0.4 100 1000

00 1 2 3 4 5 (m3/min) 00 1 2 3 4 5 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 80 100 120 140 160 180 (CFM) 0 20 40 60 80 100 120 140 160 180 (CFM)
Air ow Air ow

131CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example
DC Fan 80 mm sq. DC
9GV0812P1H03 With pulse sensor with PWM control function
Static pressure
PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC 9700 min-1
PWM frequency: 25 kHz
2.4 600 2.4 600 10000
9000 2900 min-1
2.0 500 PWM duty cycle Static pressure 2.0 500 13.2 V Fan speed 8000
1.6 400 100% 1.6 400 12 V 7000
1.2 300 50% 1.2 300 10.8 V 6000
0.8 200 5000
0.8 200 4000
3000
0.4 100 0% 0.4 100 2000
1000

00 1 2 3 4 5 (m3/min) 00 1 2 3 4 5 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 80 100 120 140 160 180 (CFM) 0 20 40 60 80 100 120 140 160 180 (CFM)
Air ow Air ow

9GV0812P1F03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
1.6 400 1.6 400 10000

Static pressure 1.2 300 PWM duty cycle Static pressure 1.2 300 13.8 V 9000 8000 min-1
100% 0.8 200 12 V 8000
10.2 V
Fan speed 7000

6000

0.8 200 50% 5000

4000

0.4 100 0.4 100 3000
2000 2400 min-1
0%
1000

00 1 2 3 4 (m3/min) 00 1 2 3 4 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 80 100 120 140 (CFM) 0 20 40 60 80 100 120 140 (CFM)
Air ow Air ow

9GV0812P1M03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
1.0 250 1.0 250 7000

0.8 200 0.8 200 6000 6000 min-1
0.6 150 0.6 150
Static pressure 0.4 100 PWM duty cycle Static pressure 0.4 100 13.8 V Fan speed 5000
100% 12 V
50% 10.2 V 4000

3000

0.2 50 0% 0.2 50 2000
1700 min-1

1000

00 1 2 3 (m3/min) 00 1 2 3 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 80 100 (CFM) 0 20 40 60 80 100 (CFM)
Air ow Air ow

9GV0824P1G03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
2.4 600 2.4 600 27.6 V 11000
24 V 10200 min-1
2.0 500 2.0 500 20.4 V 10000
1.6 400
1.6 400 9000
Static pressure PWM duty cycle Static pressure 8000
100% 1.2 300
Fan speed 7000

1.2 300 6000
0.8 200
0.4 100 50% 0.8 200 5000 4700 min-1
0% 4000

3000

0.4 100 2000

00 1000

00 1 2 3 4 5 (m3/min) 1 2 3 4 5 (m3/min) 0 100 (%)
PWM duty cycle
0 25 50 75 100 125 150 175 (CFM) 0 25 50 75 100 125 150 175 (CFM)
Air ow
Air ow

132 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example
Fan speed
9GV0848P1G03 With pulse sensor with PWM control function
DC Fan 80 mm sq. DC
PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
2.4 600 2.4 600 11000

2.0 500 2.0 500 10000 10200 min-1
1.6 400 1.6 400
Static pressure PWM duty cycle Static pressure 1.2 300 55.2 V 9000
100% 0.8 200 48 V 8000

40.8 V 7000

1.2 300 50% 6000
0.8 200 0%
0.4 100 5000 4700 min-1
4000

3000
2000
0.4 100
1000
00 00
1 2 3 4 5 (m3/min) 1 2 3 4 5 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 80 100120140 160180 (CFM) 0 20 40 60 80 100120140160180 (CFM)
Air ow
Air ow

■ Dimensions (unit: mm) (With ribs)

4-ø4.3±0.3

Mounting hole

Lead wire
AWG24
UL 1430

+30
300 0
80±0.5
71.5±0.3

71.5±0.3 (10)
80±0.5
(4) 38±0.5 (4)

Rotating direction Airflow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø4.5

71.5±0.3

ø90
78.5

71.5±0.3

78.5

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1002G
Finger guards
Model no.: 109-049E, 109-049H, 109-049C

Resin filter kits page: p. 592

Model no.: 109-1002F13 (13PPI), 109-1002F20 (20PPI),
109-1002F30 (30PPI), 109-1002F40 (40PPI)

133CATALOG No. C1111B001 '21.2.IT

DC Fan 80 mm sq. DC DC Fan

80×80×38 mm

San Ace 80 9G type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow
· Mass………………………………………… 170 g

■ Specifications

The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
9G0812K101 [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9G0812G101 12 10.8 to 13.2 -20 to +60
9G0812H101 1.8 21.6 7800 3.1 107.3 310 1.285 58
9G0824G101 7 to 13.8 1.1 13.2 6300 2.55 90 211 0.847 51
9G0824H101 0.9 10.8 5700 2.28 80 171 0.687 49
9G0848G101 24 20.4 to 27.6 0.56 13.4 6300 2.55 90 211 0.847 51 40000/60˚C
9G0848H101 0.42 10.1 5700 2.28 80 171 0.687 49 -20 to +70 (70000/40˚C)
0.27 13.0 6300 2.55 90 211 0.847 51
48 40.8 to 55.2 0.2 9.6 5700 2.28 80 171 0.687 49

Note: Sensor and control options are available for selection. Refer to the table on p. 626.

■ Airflow - Static Pressure Characteristics

9G0812K101 With pulse sensor 9G0812G101 With pulse sensor 9G0812H101 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

1.4 350 1.1 260 0.9 220
1.0 240
1.2 300 0.9 220 0.8 200
1.0 250
0.8 200 13.2 V 0.8 200 0.7 180
0.6 150 12 V 160
10.8 V 140
Static pressure 0.7 180 0.6 13.8 V
Static pressure0.6160 12 V
Static pressure0.5140
120 13.8 V 0.5 120 7V
12 V
0.4 100 0.4 100 0.5 1.0 1.5 2.0 2.5 3.0 (m3/min)
7V 20 40 60 80 100 (CFM)
0.4 100 0.3 80 0.3 80
0.2 60 0.5 1.0 1.5 2.0 2.5 3.0 (m3/min) 60 Air ow
0.2 50 0.1 40 20 40 60 80 100 120 (CFM) 0.2 40
20
0 0 0.5 1 1.5 2.0 2.5 3.0 3.5 (m3/min) Air ow 0.1 20
00 00
0 20 40 60 80 100 120 (CFM)
Air ow 0 0

134 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics Static pressure

9G0824G101 With pulse sensor 9G0824H101 With pulse sensor DC Fan 80 mm sq. DC9G0848G101 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

1.1 260 0.9 220 1.1 260
1.0 240 1.0 240
0.9 220 0.8 200 0.9 220

0.8 200 0.7 180 0.8 200
Static pressure Static pressure 160 27.6 V
0.7 180 27.6 V 0.6 140 24 V 0.7 180 55.2 V
0.6 160 24 V 20.4 V 0.6 160 48 V
0.5 140 20.4 V 0.5 120 0.5 140 40.8 V
120 0.5 1.0 1.5 2.0 2.5 3.0 (m3/min) 120
0.4 100 0.5 1.0 1.5 2.0 2.5 3.0 (m3/min) 0.4 100 20 40 60 80 100 (CFM) 0.4 100 0.5 1.0 1.5 2.0 2.5 3.0 (m3/min)
20 40 60 80 100 120 (CFM) 20 40 60 80 100 120 (CFM)
0.3 80 0.3 80 Air ow 0.3 80
0.2 60 Air ow 60 0.2 60 Air ow
0.1 40 0.2 40 0.1 40
20 20
00 0.1 20 00
00

0 0 0

9G0848H101 With pulse sensor
Operating voltage range

(inch H2O) (Pa)

0.9 220

0.8 200

0.7 180
Static pressure 160 55.2 V
0.6 140 48 V
40.8 V
0.5 120
0.5 1.0 1.5 2.0 2.5 3.0 (m3/min)
0.4 100 20 40 60 80 100 (CFM)

0.3 80 Air ow
60
0.2 40

0.1 20
00

0

■ Dimensions (unit: mm) (With ribs)

4-ø4.3±0.3

Mounting hole

80±0.5 Lead wire
71.5±0.3 AWG24
UL 1007
+30
300 0

7810.5±±00.5.3 (10)

Rotating direction (4) (4)

38±0.5

Airflow direction

135CATALOG No. C1111B001 '21.2.IT

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)
DC Fan 80 mm sq. DC
Inlet side, Outlet side 4-ø4.5
78.5
71.5±0.3
71.5±0.3
ø90

78.5

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1002G
Finger guards
Model no.: 109-049E, 109-049H, 109-049C

Resin filter kits page: p. 592

Model no.: 109-1002F13 (13PPI), 109-1002F20 (20PPI),
109-1002F30 (30PPI), 109-1002F40 (40PPI)

136 CATALOG No. C1111B001 '21.2.IT

DC Fan DC Fan 92 mm sq. DC

92×92×25 mm

San Ace 92 9HV type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 150 g

■ Specifications

The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
9HV0912P4G001 cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9HV0912P4H001 12 10.2 to 13.8 -20 to +70 40000/60˚C
9HV0924P4G001 100 1.23 14.76 7350 3.35 118 280 1.12 56 (70000/40˚C)
9HV0924P4H001 24 20.4 to 27.6 20 0.12 1.44 2200 1.0 35.3 25 0.1 26
100 0.71 8.52 6050 2.75 97.1 190 0.76 52
20 0.07 0.84 1700 0.77 27.2 15 0.06 20
100 0.61 14.64 7350 3.35 118 280 1.12 56
20 0.06 1.44 2200 1.0 35.3 25 0.1 26
100 0.38 9.12 6050 2.75 97.1 190 0.76 52
20 0.05 1.2 1700 0.77 27.2 15 0.06 20

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note: Sensor and control options are available for selection. Refer to the table on p. 634.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9HV0912P4G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
1.4 350 1.4 350 13.8 V 9000
1.2 300 8000
1.2 300 PWM duty cycle 7000 7350 min-1
1.0 250 100% 6000
Static pressure 1.0 250 12 V 5000
0.8 200 Static pressure0.8 200 10.2 V 4000
0.6 150 3000
0.6 150 Speed 2000
1000
0.4 100 50% 0.4 100

0.2 50 20% 0.2 50

0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 (m3/min) 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 (m3/min) 0 100 (%)
0 20 40 60 80 100 120 140 (CFM) 0 20 40 60 80 100 120 140 (CFM) PWM duty cycle
Air ow Air ow

137CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example
DC Fan 92 mm sq. DC
9HV0912P4H001 With pulse sensor with PWM control function
Static pressure
PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
240 PWM duty cycle 240 13.8 V 7000
0.9 220 100% 0.9 220
0.8 200 12 V 6000 6050 min-1
50% 0.8 200 10.2 V
0.7 180 20% 180
160 0.5 1.0 1.5 2.0 2.5 3.0 3.5 (m3/min) Static pressure 0.7 160 0.5 1.0 1.5 2.0 2.5 3.0 3.5 (m3/min) 5000
0.6 140 0.6 140 20 40 60 80 100 120 (CFM)
Speed 4000
0.5 120 0.5 120 Air ow
0.4 100 3000
0.3 80 0.4 100
0.3 80
60 60 2000
0.2 40 0.2 40
0.1 20 1000
0.1 20
00 00
0 100 (%)
0 20 40 60 80 100 120 (CFM) 0 PWM duty cycle

Air ow

9HV0924P4G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
1.4 350 1.4 350 27.6 V 9000
1.2 300 8000
1.2 300 PWM duty cycle 7000 7350 min-1
Static pressure 1.0 250 100% Static pressure 6000
1.0 250 24 V 5000
0.8 200 0.8 200 20.4 V Speed 4000
0.6 150 3000
0.6 150 2000
1000
0.4 100 50% 0.4 100

0.2 50 20% 0.2 50

0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 (m3/min) 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 (m3/min) 0 100 (%)
0 20 40 60 80 100 120 140 (CFM) 0 20 40 60 80 100 120 140 (CFM) PWM duty cycle
Air ow Air ow

9HV0924P4H001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
240 PWM duty cycle 240 27.6 V 7000
0.9 220 100% 0.9 220
0.8 200 24 V 6000 6050 min-1
50% 0.8 200 20.4 V
180 20% 180
Static pressure 0.7 160 0.5 1.0 1.5 2.0 2.5 3.0 3.5 (m3/min) Static pressure 0.7 160 0.5 1.0 1.5 2.0 2.5 3.0 3.5 (m3/min) 5000
0.6 140 0.6 140 20 40 60 80 100 120 (CFM)
Speed 4000
0.5 120 0.5 120 Air ow
0.4 100
0.3 80 0.4 100 3000
0.3 80
60 60 2000
0.2 40 0.2 40
1000
0.1 20 0.1 20
00 00
0 100 (%)
0 20 40 60 80 100 120 (CFM) 0 PWM duty cycle

Air ow

138 CATALOG No. C1111B001 '21.2.IT

■ Dimensions (unit: mm) (With ribs) DC Fan 92 mm sq. DC

4-ø4.5±0.3 92±0.5 25.2±0.5
Mounting hole 82.5±0.3 (4) (4)

92±0.5 Lead wire
82.5±0.3 AWG 26
UL 1430
+50
300 0

(10)

Rotating direction Air ow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side 4-ø4.5 Outlet side 4-ø4.5
90.5 90.5

90.5
82.5±0.3

90.5
82.5±0.3
ø97 ø102

82.5±0.3 82.5±0.3

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1001G
Finger guards
Model no.: 109-099E, 109-099H, 109-099C

Resin filter kits page: p. 592

Model no.: 109-1001F13 (13PPI), 109-1001F20 (20PPI),
109-1001F30 (30PPI), 109-1001F40 (40PPI)

139CATALOG No. C1111B001 '21.2.IT

DC Fan 92 mm sq. DC DC Fan

92×92×25 mm

San Ace 92 9GA type Low Power Consumption Fan

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown

(For models without PWM control function, there is no speed control wiring.)
· Mass………………………………………… 125 g

■ Specifications

The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
9GA0912P4J03 cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9GA0912P4G03 12 10.2 to 13.8 -20 to +70 60000/60˚C
9GA0912P4S03 100 0.39 4.68 5000 2.2 77.7 105 0.42 43 (90000/40˚C)
9GA0924P4J03 24 20.4 to 27.6 0 0.06 0.72 1500 0.65 23.3 9.4 0.04 14
9GA0924P4G03 0.28 3.36 4400 1.93 68.2 81 0.33 39
9GA0924P4S03 100 0.06 0.72 1500 0.65 23.3 9.4 0.04 14
0 0.2 2.4 3800 1.67 59.0 60.6 0.24 35
0.06 0.72 1500 0.65 23.3 9.4 0.04 14
100 0.2 4.8 5000 2.2 77.7 43
0 0.04 0.96 1500 0.65 23.3 105 0.42 14
0.15 3.6 4400 1.93 68.2 9.4 0.04 39
100 0.04 0.96 1500 0.65 23.3 81 0.33 14
0 0.12 2.88 3800 1.67 59.0 9.4 0.04 35
0.04 0.96 1500 0.65 23.3 60.6 0.24 14
100 9.4 0.04
0

100
0

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
9GA0912H401 [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9GA0912W401 12 10.2 to 13.8
9GA0912F401 7 to 16 0.19 2.28 3300 1.45 51.2 45.6 0.18 31
9GA0912M401 0.19 2.28 3300 1.45 51.2 45.6 0.18 31
9GA0912L401 10.2 to 13.8 0.14 1.68 2800 1.23 43.5 32.9 0.13 28
9GA0924H401 0.11 1.32 2400 1.05 37.1 24 0.096 24
9GA0924W401 20.4 to 27.6 0.09 1.08 2000 0.87 30.7 16.7 0.067 21 -20 to +70 60000/60˚C
9GA0924F401 12 to 28.8 0.09 2.16 3300 1.45 51.2 45.6 0.18 31 (90000/40˚C)
9GA0924M401 24 16 to 27.6 0.09 2.16 3300 1.45 51.2 45.6 0.18 31
9GA0924L401 0.08 1.92 2800 1.23 43.5 32.9 0.13 28
14 to 27.6 0.05 1.2 2400 1.05 37.1 24 0.096 24
0.03 0.72 2000 0.87 30.7 16.7 0.067 21

Note 1: Sensor and control options are available for selection. Refer to the table on pp. 630 to 631.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

140 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example DC Fan 92 mm sq. DC

9GA0912P4J03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC 5000 min-1
PWM frequency: 25 kHz
120 140 13.8 V 5000
0.5 120 12 V
Static pressure 0.4 100 PWM duty cycle Static pressure 4000
100% 0.4 100 10.2 V
0.3 80 50% Fan speed 3000
0% 0.3 80 0.5 1.0 1.5 2.0 2.5 (m3/min)
60 0.2 60 20 40 60 80 (CFM) 2000
0.2
40 Air ow 1500 min-1
40 0.1 20 1000
0.1 20
00
0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 0 100 (%)
PWM duty cycle
0 20 40 60 80 (CFM)
Air ow

9GA0912P4G03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
0.4 100 PWM duty cycle 0.4 100 13.8 V 5000
100% 12 V 4000 4400 min-1
0.3 80 0.3 80 10.2 V
Static pressure 50% Static pressure Fan speed 3000
60 0% 60
0.2 0.2 2000
1500 min-1
40 40
0.1 1000
0.1 20
20

00 0.5 1.0 1.5 2.0 (m3/min) 00 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 (CFM) 0 20 40 60 80 (CFM)
Air ow
Air ow

9GA0912P4S03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
0.3 80 PWM duty cycle 0.3 80 13.8 V 5000
100% 12 V
60 Static pressure 60 Static pressure Fan speed 4000 3800 min-1
0.2 0.2 10.2 V 3000

40 40

0.1 50% 0.1 2000
20 0% 20 1500 min-1

1000

00 0.5 1.0 1.5 2.0 (m3/min) 00 0.5 1.0 1.5 2.0 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 (CFM) 0 20 40 60 (CFM)
Air ow Air ow

9GA0924P4J03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC 5000 min-1
PWM frequency: 25 kHz
120 140 27.6 V 5000
0.5 120 24 V
Static pressure 0.4 100 PWM duty cycle Static pressure 4000
100% 0.4 100 20.4 V
0.3 80 50% Fan speed 3000
0% 0.3 80 0.5 1.0 1.5 2.0 2.5 (m3/min)
60 0.2 60 20 40 60 80 (CFM) 2000
0.2
40 Air ow 1500 min-1
40 0.1 20 1000
0.1 20
00
0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 0 100 (%)
PWM duty cycle
0 20 40 60 80 (CFM)
Air ow

141CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example
DC Fan 92 mm sq. DC
9GA0924P4G03 With pulse sensor with PWM control function
Static pressure
PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
0.4 100 PWM duty cycle 0.4 100 27.6 V 5000
100% 24 V
0.3 80 0.3 80 20.4 V 4400 min-1
50%
60 0% 60 Static pressure 4000
0.2 0.2
Fan speed 3000
40 40
0.1 2000
0.1 20 1500 min-1
20
1000

00 0.5 1.0 1.5 2.0 (m3/min) 00 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 (CFM) 0 20 40 60 80 (CFM)
Air ow
Air ow

9GA0924P4S03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
0.3 80 PWM duty cycle 0.3 80 27.6 V 5000
100% 24 V
60 Static pressure 50% 60 Static pressure Fan speed 4000 3800 min-1
0.2 0% 0.2 20.4 V 3000

40 40 2000
1500 min-1
0.1 0.1
20 20 1000

00 0.5 1.0 1.5 2.0 (m3/min) 00 0.5 1.0 1.5 2.0 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 (CFM) 0 20 40 60 (CFM)
Air ow Air ow

■ Airflow - Static Pressure Characteristics

9GA0912H401 With pulse sensor 9GA0912W401 With pulse sensor 9GA0912F401 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa) 13.8 V
12 V
80 80 0.20 50 10.2 V
0.30 0.30 0.18
0.16 40
Static pressure 0.25 60 13.8 V Static pressure 0.25 60 16 V Static pressure 0.14
0.20 12 V 0.20 12 V 0.12 30
0.15 40 10.2 V 0.15 40 0.10
0.08 20
0.10 20 0.10 20 7V 0.06
0.05 0.05 0.04 10
0.02
00 0.5 1.0 1.5 2.0 (m3/min) 00 0.5 1.0 1.5 2.0 (m3/min) 0.5 1.0 1.5 (m3/min)
00 10 20 30 40 50 (CFM)
0 10 20 30 40 50 60 70 (CFM) 0 10 20 30 40 50 60 70 (CFM)
0 Air ow

Air ow Air ow

142 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics DC Fan 92 mm sq. DC

9GA0912M401 With pulse sensor 9GA0912L401 With pulse sensor 9GA0924H401 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.16 40 0.10 25 80
0.14 0.30
0.12 30
Static pressure 0.10 13.8 V Static pressure 0.08 20 13.8 V Static pressure 0.25 60 27.6 V
0.08 20 12 V 0.06 15 12 V 0.20
0.06 0.04 10 10.2 V 0.15 40 24 V
0.04 10 10.2 V 0.02 5 20.4 V
0.02 0.10
20
00
0 0.05

0.5 1.0 1.5 (m3/min) 00 0.5 1.0 1.5 (m3/min) 00 0.5 1.0 1.5 2.0 (m3/min)
10 20 30 40 50 (CFM)
0 10 20 30 40 50 (CFM) 0 10 20 30 40 50 60 70 (CFM)
Air ow
Air ow Air ow

9GA0924W401 With pulse sensor 9GA0924F401 With pulse sensor 9GA0924M401 With pulse sensor
Operating voltage range Operating voltage range Operating voltage range

Static pressure(inch H2O) (Pa) 28.8 V Static pressure(inch H2O) (Pa) 27.6 V Static pressure(inch H2O) (Pa) 27.6 V
24 V 24 V 24 V
80 0.20 50 0.16 40 14 V
0.30 0.18 16 V 0.14
0.16 40 0.12 30
0.25 60 0.14 0.5 1.0 0.10
0.20 0.12 30 10 20 30 40 0.08 20
0.15 40 0.10 0.06
0.08 20 Air ow 0.04 10
0.10 20 12 V 0.06 0.02
0.05 0.04 10
0.02 00
00 0.5 1.0 1.5 2.0 (m3/min) 1.5 (m3/min) 0 0.5 1.0 1.5 (m3/min)
00 50 (CFM) 10 20 30 40 50 (CFM)
0 10 20 30 40 50 60 70 (CFM)
0 Air ow

Air ow

9GA0924L401 With pulse sensor
Operating voltage range

(inch H2O) (Pa)

0.10 25

Static pressure 0.08 20 27.6 V
0.06 15 24 V
0.04 10
0.02 5 14 V

00 0.5 1.0 1.5 (m3/min)

0 10 20 30 40 50 (CFM)

Air ow

■ Dimensions (unit: mm) (Ribbed frame with pulse sensor with PWM control function)

4-ø4.5±0.3

Mounting hole

92±0.5 Lead wire
82.5±0.3 AWG26
UL 1007

+50
300 0

(10) (4) (4)

82.5±0.3 25.2±0.5
92±0.5

Rotating direction Air ow direction

143CATALOG No. C1111B001 '21.2.IT

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)
DC Fan 92 mm sq. DC
Inlet side Outlet side
90.590.5 90.5

82.5±0.34-ø4.54-ø4.5

90.5

82.5±0.3
ø97 ø108

82.5±0.3 82.5±0.3

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1001G
Finger guards
Model no.: 109-099E, 109-099H, 109-099C

Resin filter kits page: p. 592

Model no.: 109-1001F13 (13PPI), 109-1001F20 (20PPI),
109-1001F30 (30PPI), 109-1001F40 (40PPI)

144 CATALOG No. C1111B001 '21.2.IT

DC Fan DC Fan 92 mm sq. DC

92×92×25 mm

San Ace 92 9S type Silent Fan

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow
· Mass………………………………………… 100 g

■ Specifications

The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
9S0912F401 [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9S0912M401 12 5.0 to 13.8 -10 to +70 40000/60˚C
9S0912L401 6.0 to 13.8 0.14 1.68 2650 1.26 44.5 30.0 0.12 27 (70000/40˚C)
9S0924F401 0.11 1.32 2250 1.07 37.8 21.6 0.087 22
9S0924M401 24 14 to 26.4 0.07 0.84 1750 0.83 29.3 13.1 0.053 17
9S0924L401 0.09 2.16 2650 1.26 44.5 30.0 0.12 27
0.07 1.68 2250 1.07 37.8 21.6 0.087 22
0.04 0.96 1750 0.83 29.3 13.1 0.053 17

Note 1: Sensor and control options are available for selection. Refer to the table on p. 636.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics

9S0912F401 With pulse sensor 9S0912M401 With pulse sensor 9S0912L401 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.16 40 0.12 30 0.08 20
0.14 35 0.07
Static pressure0.12 30 13.8 V 0.10 25 13.8 V 0.06 15 13.8 V
Static pressure0.10 2512 V0.08 2012 V 0.05 12 V
Static pressure0.08 200.06 150.04 10
0.06 15 5V 0.04 10 5V 0.03 6V
0.04 10 0.02 5
0.02 5 0.02 5 0.01

00 0.5 1.0 1.5 (m3/min) 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 (m3/min) 00 0.2 0.4 0.6 0.8 1.0 1.2 (m3/min)
50 (CFM)
0 10 20 30 40 0 10 20 30 40 50 (CFM) 0 10 20 30 40 (CFM)
Air ow Air ow Air ow

145CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics
DC Fan 92 mm sq. DC
9S0924F401 With pulse sensor 9S0924M401 With pulse sensor 9S0924L401 With pulse sensor
Static pressure Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.16 40 0.12 30 0.08 20
0.14 35 0.10 25
0.12 30 26.4 V Static pressure 0.08 20 26.4 V Static pressure 0.07 26.4 V
0.10 25 24 V 0.06 15 24 V 0.06 15 24 V
0.08 20 0.04 10 0.05
0.06 15 14 V 0.02 5 14 V 0.04 10 14 V
0.04 10
0.02 5 0.03

00 0.02 5

0 0.01

0.5 1.0 1.5 (m3/min) 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 (m3/min) 0 0 0.2 0.4 0.6 0.8 1.0 1.2 (m3/min)
50 60 (CFM)
10 20 30 40 0 10 20 30 40 50 (CFM) 0 10 20 30 40 (CFM)
Air ow Air ow Air ow

■ Dimensions (unit: mm) (With ribs) 25±0.5

4-ø4.3±0.3 (4) (4)

Mounting hole

Lead wire
AWG24
UL 1007

+50
300 0
92±0.5
82.5±0.3

(10)

82.5±0.3 Air ow direction
92±0.5

Rotating direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø4.5
90.5

82.5±0.3
ø102

90.5

82.5±0.3

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1001G
Finger guards
Model no.: 109-099E, 109-099H, 109-099C

Resin filter kits page: p. 592

Model no.: 109-1001F13 (13PPI), 109-1001F20 (20PPI),
109-1001F30 (30PPI), 109-1001F40 (40PPI)

146 CATALOG No. C1111B001 '21.2.IT

DC Fan DC Fan 92 mm sq. DC

92×92×25 mm

San Cooler 92 9A type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black or Blue Sensor Yellow
· Mass………………………………………… 100 g

■ Specifications

The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9A0912G401 [˚C] [h]
12 6 to 13.8 0.39 4.68 3900 1.76 62.1 66.5 0.267 43
9A0912S401 -20 to +60 30000/60˚C
9A0912H401 7 to 13.8 0.27 3.24 3550 1.66 58.6 56.1 0.225 39 (53000/40˚C)
9A0912F401 0.21 2.52 3150 1.45 51.2 44 0.177 33
9A0912M401 24 12 to 27.6 0.14 1.68 2650 1.24 43.8 32.2 0.129 30 40000/60˚C
9A0912L401 0.12 1.44 2250 1.04 36.7 22.6 0.091 27 -20 to +70 (70000/40˚C)
14 to 27.6 0.07 0.84 1750 0.8 28.2 13.4 0.054 23
9A0924G401 48 40.5 to 53 -20 to +60 30000/60˚C
0.19 4.56 3900 1.76 62.1 66.5 0.267 43 (53000/40˚C)
9A0924S401
9A0924H401 0.15 3.6 3550 1.66 58.6 56.1 0.225 39 -20 to +70 40000/60˚C
9A0924F401 0.1 2.4 3150 1.45 51.2 44 0.177 33 (70000/40˚C)
9A0924M401 0.08 1.92 2650 1.24 43.8 32.2 0.129 30
9A0924L401 0.05 1.2 2250 1.04 36.7 22.6 0.091 27 -20 to +60
9A0948S401 0.04 0.96 1750 0.8 28.2 13.4 0.054 23
0.08 3.84 3550 1.66 58.6 56.1 0.225 39

Note 1: Sensor and control options are available for selection. Refer to the table on p. 624.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics

9A0912G401 With pulse sensor 9A0912S401 With pulse sensor 9A0912H401 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.40 100 80 0.25 60
0.30 70
0.35Static pressure 13.8 V 0.25 60 13.8 V 0.20 50 13.8 V
0.30 80 Static pressure12 V 12 V 12 V
Static pressure0.20 500.15 40
0.25 60 6V 6V 30 6V
0.20 0.15 40
0.15 40 30 0.10
20
0.10 20 0.10
0.05 20 0.05 10

0.05 10

0 0 0.4 0.8 1.2 1.6 2.0 (m3/min) 00 0.5 1.0 1.5 2.0 2.5 (m3/min) 00 0.5 1.0 1.5 2.0(m3/min)

0 10 20 30 40 50 60 70 (CFM) 0 10 20 30 40 50 60 70 80 (CFM) 0 10 20 30 40 50 60 70 (CFM)
Air ow Air ow Air ow

147CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics
DC Fan 92 mm sq. DC
9A0912F401 With pulse sensor 9A0912M401 With pulse sensor 9A0912L401 With pulse sensor
Static pressure Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) 13.8 V Static pressure(inch H2O) (Pa) 13.8 V Static pressure(inch H2O) (Pa) 13.8 V
12 V 12 V
0.20 50 6V 0.16 40 12 V 0.12 30
0.18 0.14 6V
0.16 40 0.12 30 0.10
0.14 0.10
0.12 30 0.08 20 0.08 20
0.10 0.06
0.08 20 0.04 10 0.06 7V
0.06 0.02 0.04 10
0.04 10
0.02 0.5 1.0 1.5 (m3/min) 00 0.5 1.0 1.5 (m3/min) 0.02
10 20 30 40 50 60 (CFM) 50 (CFM)
00 0 10 20 30 40 0 0 0.2 0.4 0.6 0.8 1.0 (m3/min)
Air ow Air ow 0 10 20 30 (CFM)
0 Air ow

9A0924G401 With pulse sensor 9A0924S401 With pulse sensor 9A0924H401 With pulse sensor
Operating voltage range Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.40 100 80 0.25 60
0.30 70
Static pressure 0.35 27.6 V Static pressure 0.25 60 27.6 V Static pressure 0.20 50 27.6 V
0.30 80 24 V 24 V 24 V
0.20 50 0.15 40
0.25 60 12 V 12 V 30 12 V
0.20 0.15 40
0.15 40 0.10 30 0.10
20
0.10 20 20
0.05 0.05 10 0.05 10

0 0 0.4 0.8 1.2 1.6 2.0 (m3/min) 00 0.5 1.0 1.5 2.0 2.5 (m3/min) 00 0.5 1.0 1.5 2.0(m3/min)

0 10 20 30 40 50 60 70 (CFM) 0 10 20 30 40 50 60 70 80 (CFM) 0 10 20 30 40 50 60 70 (CFM)
Air ow Air ow Air ow

9A0924F401 With pulse sensor 9A0924M401 With pulse sensor 9A0924L401 With pulse sensor
Operating voltage range Operating voltage range Operating voltage range

Static pressure (inch H2O) (Pa) 27.6 V Static pressure(inch H2O) (Pa) 27.6 V Static pressure(inch H2O) (Pa) 27.6 V
24 V 24 V
0.20 50 12 V 0.16 40 24 V 0.12 30
0.18 0.14 12 V 14 V
0.16 40 0.12 30 0.10
0.14 0.10 0.08 20
0.12 30 0.08 20
0.10 0.06 0.06
0.08 20 0.04 10 0.04 10
0.06 0.02
0.04 10 0.02
0.02 00
0.5 1.0 1.5 (m3/min) 0.5 1.0 1.5 (m3/min) 0 0 0.2 0.4 0.6 0.8 1.0 (m3/min)
00 10 20 30 40 50 60 (CFM) 0 50 (CFM)
10 20 30 40 0 10 20 30 (CFM)
0 Air ow Air ow Air ow

9A0948S401 With pulse sensor
Operating voltage range

Static pressure (inch H2O) (Pa) 53 V

80
0.30 70
0.25 60

0.20 50 48 V

0.15 40 40.5 V
30

0.10
20

0.05 10

0 0 0.5 1.0 1.5 2.0 2.5 (m3/min)

0 10 20 30 40 50 60 70 80 (CFM)
Air ow

148 CATALOG No. C1111B001 '21.2.IT

■ Dimensions (unit: mm) (With ribs) DC Fan 92 mm sq. DC

92±0.5 4-ø4.3±0.3 25±0.5
82.5±0.3
Mounting hole (4) (4)

92±0.5 Lead wire
82.5±0.3 AWG24
UL 1007

+50
300 0

(10)

Rotating direction Airflow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side 4-ø4.5 Outlet side 4-ø4.5
90.5 90.5

82.5±0.3 ø92

90.5

82.5±0.3
ø102

90.5

82.5±0.3 82.5±0.3

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1001G
Finger guards
Model no.: 109-099E, 109-099H, 109-099C

Resin filter kits page: p. 592

Model no.: 109-1001F13 (13PPI), 109-1001F20 (20PPI),
109-1001F30 (30PPI), 109-1001F40 (40PPI)

149CATALOG No. C1111B001 '21.2.IT

DC Fan 92 mm sq. DC DC Fan

92×92×32 mm

San Ace 92 9G type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black or Blue Sensor Yellow
· Mass………………………………………… 170 g

■ Specifications

The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
9G0912A201 [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9G0912S201 12 10.2 to 13.8 -20 to +70
9G0912H201 0.58 6.96 4300 2.5 88.3 115 0.462 44
9G0912M201 24 20.4 to 27.6 0.38 4.56 3500 2.0 70.7 77 0.309 38 -20 to +60
9G0924A201 0.23 2.76 2850 1.59 56.2 51 0.205 32
9G0924S201 48 40.8 to 55.2 0.13 1.56 2100 1.2 42.4 27 0.108 25 40000/60˚C
9G0924H201 0.3 7.2 4300 2.5 88.3 115 0.462 44 (70000/40˚C)
9G0924M201 0.19 4.56 3500 2.0 70.7 77 0.309 38
9G0948A201 0.12 2.88 2850 1.59 56.2 51 0.205 32 -20 to +70
9G0948S201 0.08 1.92 2100 1.2 42.4 27 0.108 25
9G0948H201 0.16 7.68 4300 2.5 88.3 115 0.462 44
9G0948M201 0.11 5.28 3500 2.0 70.7 77 0.309 38
0.08 3.84 2850 1.59 56.2 51 0.205 32
0.05 2.4 2100 1.2 42.4 27 0.108 25

Note 1: Sensor and control options are available for selection. Refer to the table on pp. 626 to 627.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics

9G0912A201 With pulse sensor 9G0912S201 With pulse sensor 9G0912H201 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) 13.8 V (inch H2O) (Pa) 13.8 V (inch H2O) (Pa) 13.8 V
12 V 12 V 12 V
160 0.5 120 80
0.6 140 10.2 V 10.2 V 0.30 10.2 V
0.5 120 0.4 100
0.25 60
0.4 100 0.3 80 0.20
Static pressure 60 0.15 40
0.3 80 Static pressure
60 Static pressure0.20.10
40 20
0.2
40 0.1 20 0.05

0.1 20

0 0 0.5 1.0 1.5 2.0 2.5 3.0 (m3/min) 00 0.5 1.0 1.5 2.0 2.5 (m3/min) 00 0.5 1.0 1.5 2.0 (m3/min)

0 10 20 30 40 50 60 70 80 90 100 110 (CFM) 0 10 20 30 40 50 60 70 80 90 (CFM) 0 10 20 30 40 50 60 70 (CFM)
Air ow Air ow
Air ow

150 CATALOG No. C1111B001 '21.2.IT