San Ace 2021

Counter Rotating Fan Counter Rotating Fan 80 mm sq. DC

80×80×80 mm

San Ace 80 9CRE type

■ General Specifications

· Material……………………………………… Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Inlet Red Black Sensor Yellow Control Brown

Outlet Orange Gray Sensor Purple Control White
· Mass………………………………………… 490 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
[V] [V] cycle* [%] [A] [W] [min-1]
1150 4.62 76
Inlet Outlet 31.9 0.13 30

9CRE0812P8G001 12 10.8 to 13.2 100 5.3 63.6 12000 11300 4.5 158.9 -20 to +70 40000/60˚C
0 0.2 2.4 2000 1900 0.74 26.1 (70000/40˚C)

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CRE0812P8G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC 12000 min-1
PWM frequency: 25 kHz 11300 min-1
1400 PWM duty cycle 1400 12 V/13.2 V 13000
5.0 1200 100% 5.0 1200 12000 Inlet
11000
10000
4.0 1000Static pressure 4.0 1000 9000
Static pressure10.8 V
3.0 800 3.0 800 8000
600 Fan speed6007000 Outlet
6000 2000 min-1
2.0 2.0
400 50% 400 5000
4000
1.0 200 3000
1.0 200 0% 2000
1000 1900 min-1

0 0 1.0 2.0 3.0 4.0 5.0 (m3/min) 0 0 1.0 2.0 3.0 4.0 5.0 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 80 100 120140 160 (CFM) 0 20 40 60 80 100 120 140 160 (CFM)
Air ow Air ow

251CATALOG No. C1111B001 '21.2.IT

■ Dimensions (unit: mm) Inlet side

Outlet side

80±0.5
71.5±0.5
Counter Rotating Fan 80 mm sq. DC
+50
80±0.5 300 0
71.5±0.5
(10)

4-ø4.3±0.5 (10) 4±0.3 4±0.3 4-ø4.3±0.5

Mounting hole +50 80±1 Mounting hole
300 0 Rotating direction
Rotating direction Air ow direction
Lead wire
AWG24
UL 1430

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side 4-ø4.5 Outlet side 4-ø4.5

78.5 78.5

71.5±0.3 71.5±0.3

78.5

71.5±0.3
ø90

78.5

71.5±0.3
ø82

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1002G
Finger guards
Model no.: 109-049E, 109-049H

Resin filter kits page: p. 592

Model no.: 109-1002F13 (13PPI), 109-1002F20 (20PPI),
109-1002F30 (30PPI), 109-1002F40 (40PPI)

252 CATALOG No. C1111B001 '21.2.IT

Counter Rotating Fan Counter Rotating Fan 80 mm sq. DC

80×80×80 mm

San Ace 80 9CRA type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Inlet Red Black Sensor Yellow Control Brown

Outlet Orange Gray Sensor Purple Control White
· Mass………………………………………… 450 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
[V] [V] cycle* [%] [A] [W] [min-1]
76
Inlet Outlet 30
76
9CRA0812P8G001 12 10.8 to 13.2 100 5.3 63.6 12000 11300 4.5 158.9 1150 4.62 30
9CRA0824P8G001 0 0.2 2.4 2000 1900 0.74 26.1 31.9 0.13 76
9CRA0848P8G001 2.65 63.6 12000 11300 4.5 158.9 4.62 52
24 21.6 to 26.4 100 0.09 2.16 2000 1900 0.74 26.1 1150 0.13 -20 to +70 40000/60˚C
0 1.32 63.4 12000 11300 4.5 158.9 31.9 4.62 (70000/40˚C)
0.29 13.9 5000 4700 1.88 66.2 0.8
48 40.8 to 55.2 100 1150
0 200

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note 1: Sensor and control options are available for selection. Refer to the table on p. 625.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CRA0812P8G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC 12000 min-1
PWM frequency: 25 kHz 11300 min-1
1400 PWM duty cycle 1400 12 V/13.2 V 12000
5.0 1200 100% 5.0 1200 11000
10000
Inlet

4.0 1000Static pressure 4.0 1000 9000
Static pressure10.8 V 8000
3.0 800 3.0 800 7000
600 Fan speed6006000 2000 min-1 Outlet

2.0 2.0 5000
400 50% 400 4000
3000
1.0 200 0% 1.0 200 2000
1000 1900 min-1

0 0 1.0 2.0 3.0 4.0 5.0 (m3/min) 0 0 1.0 2.0 3.0 4.0 5.0 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 80 100 120 140 160 (CFM) 0 20 40 60 80 100 120 140 160 (CFM)
Air ow Air ow

253CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CRA0824P8G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example
Counter Rotating Fan 80 mm sq. DC
Static pressure (inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
1400 PWM duty cycle 1400 24 V/26.4 V 13000
100% 5.0 1200 21.6 V 12000 12000 min-1
5.0 1200 11000 11300 min-1
4.0 1000 Inlet

4.0 1000 Static pressure 10000
9000
Fan speed 8000
3.0 800 3.0 800 7000 2000 min-1 Outlet
600
600 6000
2.0 2.0 5000
50% 400 4000
400
1.0 200 3000
1.0 200 0% 2000
1000 1900 min-1

0 0 1.0 2.0 3.0 4.0 5.0 (m3/min) 0 0 1.0 2.0 3.0 4.0 5.0 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 80 100 120 140 160 (CFM) 0 20 40 60 80 100 120 140 160 (CFM)
Air ow Air ow

9CRA0848P8G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC 12000 min-1
PWM frequency: 25 kHz 11300 min-1
1400 PWM duty cycle 1400 48 V/55.2 V 12000
5.0 1200 100% 5.0 1200 40.8 V 11000
10000 Inlet
4.0 1000 4.0 1000
Static pressure Static pressure 9000
8000 5000 min-1
3.0 800 3.0 800 Fan speed 7000 Outlet

600 50% 600 6000
2.0 0% 2.0 5000
4000 4700 min-1
400 400
1.0 200 1.0 200 3000
2000
1000
0 0 1.0 2.0 3.0 4.0 5.0(m3/min) 0 0 1.0 2.0 3.0 4.0 5.0 (m3/min)
0 20 40 60 80 100 120 140 160 (CFM) 0 100 (%)
Air ow 0 20 40 60 80 100120140160 (CFM) PWM duty cycle
Air ow

■ Dimensions (unit: mm) 80±1 (4) Outlet side

Inlet side (4) 80±0.5
71.5±0.5
4-ø4.5±0.5

Mounting hole

(10) 71.5±0.5
+30 80±0.5
300 0
Lead wire Air ow direction 4-ø4.5±0.5
AWG24
UL 1430 Mounting hole

Rotating direction Rotating direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side 4-ø4.5 Outlet side 4-ø4.5

78.5 78.5

71.5±0.3 71.5±0.3

78.5

71.5±0.3
ø90

78.5

71.5±0.3
ø82

254 CATALOG No. C1111B001 '21.2.IT

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1002G
Finger guards Counter Rotating Fan 80 mm sq. DC
Model no.: 109-049E, 109-049H

Resin filter kits page: p. 592

Model no.: 109-1002F13 (13PPI), 109-1002F20 (20PPI),
109-1002F30 (30PPI), 109-1002F40 (40PPI)

255CATALOG No. C1111B001 '21.2.IT

Counter Rotating Fan 92 mm sq. DC Counter Rotating Fan

92×92×76 mm

San Ace 92 9CRA type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Inlet Red Black Sensor Yellow Control Brown

Outlet Orange Gray Sensor Purple Control White
· Mass………………………………………… 510 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
[V] [V] cycle* [%] [A] [W] [min-1]

Inlet Outlet

9CRA0912P0G001 12 10.2 to 13.2 100 9.0 108.0 13300 12200 5.8 205 1650 6.63 81 40000/60˚C
9CRA0948P0G601 20 0.42 5.04 3500 3200 1.48 52.3 140 0.56 47 (70000/40˚C)
2.2 105.6 13300 12200 5.8 205 1650 6.63 81 -20 to +70
100 0.15 7.2 3500 3200 1.48 52.3 140 0.56 47
48 36 to 60 20

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note:The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CRA0912P0G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
7 1800 PWM duty cycle 7 1800 13.2 V 16000
100% 12 V
6 1600 6 1600 14000 13300 min-1
1400 1400 10.2 V 12200 min-1
Static pressure 12000
5 1200 Static pressure5 1200 10000 Inlet

4 1000 Fan speed4 10008000
6000
3 800 60% 3 800 Outlet
20%
2 600 2 600 4000
400 400
1 200
1 200 2000

0 0 1 2 3 4 5 6 (m3/min) 0 0 1 2 3 4 5 6 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 80 100 120 140 160 180 200 (CFM) 0 20 40 60 80 100 120 140 160 180 200 (CFM)
Air ow Air ow

256 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CRA0948P0G601 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example
Fan speed
(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
Counter Rotating Fan 92 mm sq. DCPWM frequency: 25 kHz
7 1800 PWM duty cycle 7 1800 60 V 16000
100% 1600 48 V
6 1600 14000 13300 min-1
1400 6 1400 36 V 12200 min-1
Static pressure Static pressure5 1200 12000
5 1200 10000 Inlet
4 1000
4 1000 8000
6000
3 800 60% 3 800 Outlet
20%
2 600 2 600 4000
400 400
1 200
1 200 2000

0 0 1 2 3 4 5 6 (m3/min) 0 0 1 2 3 4 5 6 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 80 100 120 140 160 180 200 (CFM) 0 20 40 60 80 100 120 140 160 180 200 (CFM)
Air ow Air ow

■ Dimensions (unit: mm) Lead wire (4) 76±1 (4) Outlet side
AWG22
Inlet side UL 3266 92±0.5
82.5±0.5
4-ø4.5±0.5

Mounting hole

(10) 82.5±0.5
300 +300 92±0.5

Rotating direction Air ow direction 4-ø4.5±0.5

Mounting hole
Rotating direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side
90.5

4-ø4.5

ø97
90.5

82.5±0.3

82.5±0.3

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1001G
Finger guards
Model no.: 109-099E, 109-099H

Resin filter kits page: p. 592

Model no.: 109-1001F13 (13PPI), 109-1001F20 (20PPI),
109-1001F30 (30PPI), 109-1001F40 (40PPI)

257CATALOG No. C1111B001 '21.2.IT

Counter Rotating Fan 120 mm sq. DC Counter Rotating Fan

120×120×76 mm

San Ace 120 9CR type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Inlet Red Black Sensor Yellow Control Brown

Outlet Orange Gray Sensor Purple Control White
· Mass………………………………………… 670 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
[V] [V] cycle* [%] [A] [W] [min-1]

Inlet Outlet

9CR1212P0G03 12 10.8 to 13.2 100 7.2 86.4 6200 3800 8.5 300 480 1.93 70 -20 to +60 40000/60˚C
0 1.1 13.2 2700 1800 3.8 134 95 0.38 51 (70000/40˚C)

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note: Sensor and control options are available for selection. Refer to the table on p. 625.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CR1212P0G03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
700 PWM duty cycle 700 13.2 V
2.5 600 100% 2.5 600 12 V 8000
10.8 V
2.0 500 50% 2.0 500 Inlet
Static pressure 6200 min-1
Static pressure1.5 4001.5 400 6000
300 300 2700 min-1
Fan speed
1.0 1.0 4000 3800 min-1
200 200
Outlet
0.5 100 0.5 100
0% 00 2000
00 1800 min-1
0
0 246 8 10 (m3/min) 246 8 10 (m3/min) 0 100 (%)
300 400 (CFM) 300 400 (CFM) PWM duty cycle
100 200 100 200
Air ow Air ow

258 CATALOG No. C1111B001 '21.2.IT

■ Dimensions (unit: mm) Inlet side

Outlet side 120±0.8
104.8±0.3
4-ø4.3±0.3

Mounting hole
118 76±1 4-ø4.3±0.3

104.8±0.3 Mounting hole

118+30
300 0
104.8±0.3
104.8±0.3(10)
120±0.8
(10)
Counter Rotating Fan 120 mm sq. DC+30
300 0

Lead wire
AWG22
UL 1430

Rotating direction Air ow direction Rotating direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side 4-ø4.5 Outlet side 4-ø4.5

104.8±0.3 104.8±0.3

ø127 ø135

118 118

■ Options page: p. 585 Resin finger guards page: p. 591
Model no.: 109-1000G
Finger guards
Model no.: 109-019E, 109-019K

Resin filter kits page: p. 592

Model no.: 109-1000F13 (13PPI), 109-1000F20 (20PPI),
109-1000F30 (30PPI), 109-1000F40 (40PPI)

259CATALOG No. C1111B001 '21.2.IT

Counter Rotating Fan ø172 mm DC Counter Rotating Fan

ø172×150×102 mm

San Ace 172 9CR type Sidecut type

■ General Specifications

· Material……………………………………… Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Inlet Red Black Sensor Yellow Control Brown

Outlet Orange Gray Sensor Purple Control White
· Mass………………………………………… 1600 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
[V] [V] cycle* [%] [A] [W] [min-1]

Inlet Outlet

9CR5748P9G001 48 36 to 72 100 5.5 264 7300 6400 18 636 1400 5.62 83 -20 to +70 40000/60˚C
0 0.5 24 2400 1900 5.5 194.3 152 0.61 54 (70000/40˚C)

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CR5748P9G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
6 1600 PWM duty cycle 6 1600 72 V 8000
1400 100% 1400
48 V 7000 Inlet 7300 min-1
5 1200 50% 5 1200 6400 min-1
6000 2400 min-1
4 1000 5000
Static pressure 4 1000 Outlet
Static pressure
3 800 3 800 36 V 4000
2 600 Fan speed2 600
3000
400 400
1 200 0% 1 200 2000 1900 min-1
1000

00 5 10 15 20 (m3/min) 00 5 10 15 20 (m3/min) 0 100 (%)
PWM duty cycle
0 100 200 300 400 500 600 700 (CFM) 0 100 200 300 400 500 600 700 (CFM)

Air ow Air ow

260 CATALOG No. C1111B001 '21.2.IT

■ Dimensions (unit: mm) 102±1 Inlet side 4-ø4.5±0.3
7.5±0.4 7.5±0.4
Outlet side 150±0.8 Mounting hole
Air ow direction
4-ø4.5±0.3

Mounting hole +30
300 0
(10)
162±0.5
ø168 (10)
162±0.5+30
ø172±0.8300 0

Counter Rotating Fan ø172 mm DCLead wire
AWG22
UL 1430

55.5° 55.5°

Rotating direction Rotating direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side
9.5

4-ø4.5

55.5° 55.5°

147

■ Options

Finger guards page: p. 586

Model no.: 109-319J, 109-319E, 109-319H, 109-320

261CATALOG No. C1111B001 '21.2.IT

262 CATALOG No. C1111B001 '21.2.IT

Reversible Flow Fan

The wind directions can be switched with these fans. Equivalent cooling performance can be obtained
in both directions.

■ Model Numbering System Not every combination of the following codes or characters is available. Contact us for an available combination. Reversible Flow Fan DC

9RF 13 12 P3 H 001

Type name Frame size Voltage PWM control function Frame thickness Speed code Individual customer’s spec

Type name 9RF
Frame size (mm)
09 13
Voltage (V) ø92 ø136
Frame thickness (mm)
Speed code 12 24
12 24

13
38 28

H

■ How to Read Specifications (DC fan) The following is a sample. See respective product pages for detailed information.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[Pa] [inchH²O] [dB (A)] [˚C] [h]
9 G A 0 4 1 2 G 7 0 01 [V] [V] [A] [W] [min-1] [m³/min] [CFM]
192 0.77 42 -20 to +70 40000/60˚C
12 7 to 13.8 0.17 2.04 13100 0.36 12.7 (70000/40˚C)

Rated voltage ………………… This is the necessary voltage to drive the fan. E.g.) 12 VDC, 24 VDC, 48 VDC
Operating voltage range …… The voltage range over which fan operation is guaranteed.
Rated current ………………… The current when the fan is operating at rated voltage (at free air).
Rated input …………………… The power value when the fan is operating at rated voltage (at free air).
Rated speed …………………… The speed when the fan is operating at rated voltage (at free air).
Max. airflow …………………… The maximum airflow that the fan can generate during rated operation (measured with our double chamber measuring device).

Airflow is the volume of air generated by the fan per unit of time.
Max. static pressure ………… The maximum static pressure value that the fan can produce during rated operation (measured with our double chamber measuring device).

Static pressure indicates a fan's ability to move air against resistance due to the internal structure of the device to which the fan is installed.
SPL ……………………………… SPL stands for Sound Pressure Level. The noise level during the fan's rated operation.

Please refer to the technical material section for the measurement method.
Operating temperature ……… The temperature range over which fan operation is guaranteed (Non- condensing).
Expected life…………………… Service life hours that 90% of bearings will survive without failing when continuously operated at the rated voltage and 60˚C

temperature. Expected life at 40˚C is for reference only.
For more information, please refer to the technical material section.

263CATALOG No. C1111B001 '21.2.IT

Reversible Flow Fan ø92 mm DC Reversible Flow Fan

ø92×38 mm

San Ace 92RF 9RF type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 150 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Airflow direction Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]

9RF0912P1H001 Forward 12 10.2 to 13.8 100 0.17 2.0 5500 1.2 42.4 156 0.63 39 40000/60˚C
Reverse 0 0.17 2.0 5300 1.2 42.4 146 0.59 43 (70000/40˚C)
0.09 2.2 5500 1.2 42.4 156 0.63 39 -20 to +70
Forward 100 0.09 2.2 5300 1.2 42.4 146 0.59 43
9RF0924P1H001 Reverse 24 20.4 to 27.6 0

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note:The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9RF0912P1H001 With pulse sensor with PWM control function

Operating voltage range Operating voltage range PWM duty - Speed characteristics example

Forward Reverse

(inch H2O) (Pa) PWM duty cycle 100% (inch H2O) (Pa) PWM duty cycle 0% Voltage: 12 VDC
160 160 (min-1) PWM frequency: 25 kHz
0.60 13.8 V/12 V 0.60 13.8 V/12 V
0.55 140 10.2 V 0.55 140 10.2 V 6000 5500 min-1

0.50 120 0.2 0.4 0.6 0.8 1.0 1.2 1.4 (m3/min) 0.50 120 0.2 0.4 0.6 0.8 1.0 1.2 1.4 (m3/min) 4000 Forward
Static pressure0.45 0.45 Reverse
0.40 100 Static pressure 0.40 100 2000
0.35 0.35 0
0.30 Fan speed800.3080
2000
0.25 60 0.25 60
0.20 0.20 4000
0.15 40 0.15 40 6000 5300 min-1

0.10 20 0.10 20
0.05 0.05
00 00
0 100 (%)
0 5 10 15 20 25 30 35 40 45 50 (CFM) 0 5 10 15 20 25 30 35 40 45 50 (CFM) PWM duty cycle

Air ow Air ow

264 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9RF0924P1H001 With pulse sensor with PWM control function

Operating voltage range Operating voltage range PWM duty - Speed characteristics example

Forward Reverse

(inch H2O) (Pa) PWM duty cycle 100% (inch H2O) (Pa) PWM duty cycle 0% Fan speed Voltage: 24 VDC
160 0.60 160 (min-1) PWM frequency: 25 kHz
0.60 27.6 V/24 V 0.55 140 27.6 V/24 V Reversible Flow Fan ø92 mm DC
0.55 140 20.4 V 20.4 V 6000 5500 min-1

0.50 120 0.2 0.4 0.6 0.8 1.0 1.2 1.4 (m3/min) 0.50 120 0.2 0.4 0.6 0.8 1.0 1.2 1.4 (m3/min) 4000 Forward
Static pressure0.45 0.45 Reverse
0.40 100 Static pressure 0.40 100 2000
0.35 0.35 0
0.30 80 0.30 80
2000
0.25 60 0.25 60
0.20 0.20 4000
0.15 40 0.15 40 6000 5300 min-1

0.10 20 0.10 20
0.05 0.05
00 00
0 100 (%)
0 5 10 15 20 25 30 35 40 45 50 (CFM) 0 5 10 15 20 25 30 35 40 45 50 (CFM) PWM duty cycle

Air ow Air ow

■ Dimensions (unit: mm)

4-ø3.5±0.3

Mounting hole

+30
300 0

(10) Air ow direction Air ow direction
(Forward) (Reverse)

89±0.5 Lead wire
85±0.7 AWG26
UL 1007

(3.5) (3.5)

85±0.7 38±0.5

ø92±0.5

Rotating direction (Forward)
Rotating direction (Reverse)

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Impeller side, Nameplate side

45° 45°

4-ø3.5 ø88
85±0.530°
4-R3.5

85±0.3

265CATALOG No. C1111B001 '21.2.IT

■ Options page: p. 584

Finger guards
Model no.: 109-1147

Reversible Flow Fan ø92 mm DC

266 CATALOG No. C1111B001 '21.2.IT

Reversible Flow Fan Reversible Flow Fan ø136 mm DC

ø136×28 mm

San Ace 136RF 9RF type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 220 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Airflow direction Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]

9RF1312P3H001 Forward 12 10.2 to 13.8 100 0.15 1.8 3100 2.0 70.7 102 0.41 35 40000/60˚C
Reverse 0 0.15 1.8 3100 2.0 70.7 104 0.418 46 (70000/40˚C)
0.09 2.2 3100 2.0 70.7 102 0.41 35 -20 to +70
Forward 100 0.09 2.2 3100 2.0 70.7 104 0.418 46
9RF1324P3H001 Reverse 24 20.4 to 27.6 0

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note:The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9RF1312P3H001 With pulse sensor with PWM control function

Operating voltage range Operating voltage range PWM duty - Speed characteristics example

Forward Reverse

(inch H2O) (Pa) PWM duty cycle 100% (inch H2O) (Pa) PWM duty cycle 0% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
120 120 4000
0.45 0.45
3000 3100 min-1
0.40 100 0.40 100
2000
0.35 10.2 V/12 V/13.8 V 0.35 10.2 V/12 V/13.8 V
0.30 0.30 80
Static pressure80 1000 Forward
Static pressure
0.25 60 0.25 60 0
0.20 Fan speed0.20
0.15 40 0.15 40 1000 Reverse

0.10 20 0.10 20 2000
0.05 0.05
3000 3100 min-1
0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 40000
0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 100 (%)

0 10 20 30 40 50 60 70 80 (CFM) 0 10 20 30 40 50 60 70 80 (CFM) PWM duty cycle
Air ow Air ow

267CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9RF1324P3H001 With pulse sensor with PWM control function

Operating voltage range Operating voltage range PWM duty - Speed characteristics example

Forward Reverse

Reversible Flow Fan ø136 mm DC(inch H2O) (Pa) PWM duty cycle 100% (inch H2O) (Pa) PWM duty cycle 0% (min-1) Voltage: 24 VDC
Static pressure PWM frequency: 25 kHz
120 120 4000
0.45 0.45
3000 3100 min-1
0.40 100 0.40 100
2000
0.35 20.4 V/24 V/27.6 V Static pressure 0.35 20.4 V/24 V/27.6 V
0.30 80 0.30 80
Fan speed 1000 Forward

0.25 60 0.25 60 0
0.20 0.20
0.15 40 0.15 40 1000 Reverse

0.10 20 0.10 20 2000
0.05 0.05
3000 3100 min-1
0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 40000
0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 100 (%)

0 10 20 30 40 50 60 70 80 (CFM) 0 10 20 30 40 50 60 70 80 (CFM) PWM duty cycle
Air ow Air ow

■ Dimensions (unit: mm)

4-ø3.5±0.3

Mounting hole

131.5±0.5 (10) Air ow direction Air ow direction
(Forward) (Reverse)
300+300
Lead wire
AWG26
UL 1007

128±0.3 128±0.3 (3) (3)

28±0.5

ø136±0.5

Rotating direction (Forward)
Rotating direction (Reverse)

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Impeller side, Nameplate side

45° 45°

4-ø3.5 ø122

128±0.3 128±0.3

■ Options page: p. 585

Finger guards
Model no.: 109-1139

268 CATALOG No. C1111B001 '21.2.IT

Splash Proof Fan

Cooling fan of IP54, IP55 and IP68 waterproof capability. For more information on IP rating, refer to p. 605.
Related product: Splash Proof Centrifugal Fan p. 333, Splash Proof Blower p. 359, Oil Proof Fan p. 363

■ Model Numbering System Not every combination of the following codes or characters is available. Contact us for an available combination. Splash Proof Fan DC

9WL 14 48 L 1 001 Frame form

Type name Frame size Voltage Speed code Frame thickness Sensor specifications

Fans with PWM control function P1 H 001

9WV 08 48 PWM control function Frame thickness Speed code Individual customer’s spec
(2 to 3 digits)
Type name Frame size Voltage Frame form

Type name 9WL 9WP 9WV etc.
Frame size (mm)
04 06 08 09 12 14 17 57
Voltage (V)
Speed code 40×40 60×60 80×80 92×92 120×120 140×140 ø172 ø172 × 150
Frame thickness (mm)
Sensor specifications (sidecut)
Frame form
12 24 48
12 24 48 etc.

A D E F G H J L M S etc.

1456
38 25 51 20

01, 001 02, 002 D01, D001
With a pulse sensor Without a sensor With a lock sensor

Nil 1
Plastic frame: Ribbed frame Plastic frame: Ribless frame
Aluminum frame: Ribless frame

■ How to Read Specifications (DC fan) The following is a sample. See respective product pages for detailed information.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[Pa] [inchH²O] [dB (A)] [˚C] [h]
9 G A 0 4 1 2 G 7 0 01 [V] [V] [A] [W] [min-1] [m³/min] [CFM]
192 0.77 42 -20 to +70 40000/60˚C
12 7 to 13.8 0.17 2.04 13100 0.36 12.7 (70000/40˚C)

Rated voltage ………………… This is the necessary voltage to drive the fan. E.g.) 12 VDC, 24 VDC, 48 VDC
Operating voltage range …… The voltage range over which fan operation is guaranteed.
Rated current ………………… The current when the fan is operating at rated voltage (at free air).
Rated input …………………… The power value when the fan is operating at rated voltage (at free air).
Rated speed …………………… The speed when the fan is operating at rated voltage (at free air).
Max. airflow …………………… The maximum airflow that the fan can generate during rated operation (measured with our double chamber measuring device).

Airflow is the volume of air generated by the fan per unit of time.
Max. static pressure ………… The maximum static pressure value that the fan can produce during rated operation (measured with our double chamber measuring device).

Static pressure indicates a fan's ability to move air against resistance due to the internal structure of the device to which the fan is installed.
SPL ……………………………… SPL stands for Sound Pressure Level. The noise level during the fan's rated operation.

Please refer to the technical material section for the measurement method.
Operating temperature ……… The temperature range over which fan operation is guaranteed (Non- condensing).
Expected life…………………… Service life hours that 90% of bearings will survive without failing when continuously operated at the rated voltage and 60˚C

temperature. Expected life at 40˚C is for reference only.
For more information, please refer to the technical material section.

269CATALOG No. C1111B001 '21.2.IT

Splash Proof Fan IP68

40×40×20 mm

San Ace 40W 9WP type

Splash Proof Fan 40 mm sq. DC ■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in indoor free air at 60°C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow
· Mass………………………………………… 50 g
· Ingress protection………………………… IP68

■ Specifications

The models listed below have ribs and pulse sensors.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9WP0412H6001 [˚C] [h]
9WP0412F6001 12 7 to 13.8 0.1 1.2 8000 0.225 8.0 65.7 0.264 33
0.06 0.72 6500 0.183 6.5 45.1 0.181 28 -10 to +60 40000/60˚C
(70000/40˚C)

Note: Sensor and control options are available for selection. Refer to the table on p. 638.

■ Airflow - Static Pressure Characteristics

9WP0412H6001 With pulse sensor 9WP0412F6001 With pulse sensor
Operating voltage range Operating voltage range

Static pressure(inch H2O) (Pa)13.8 V (inch H2O) (Pa) 13.8 V
Static pressure12 V 12 V
0.4 100 0.25 60
7V
0.3 80 0.20

60 0.15 40
0.2
0.10 7V
40 20

0.1 20 0.05

00 0.1 0.2 0.3 (m3/min) 00 0.1 0.2 0.3 (m3/min)

0 2 4 6 8 10 (CFM) 0 2 4 6 8 10 (CFM)
Air ow Air ow

270 CATALOG No. C1111B001 '21.2.IT

■ Dimensions (unit: mm) 4-ø3.5±0.3 20±0.5

+1 Mounting hole (4) (4)
40 0

32±0.3

+30
320 0

(10)

+1 Splash Proof Fan 40 mm sq. DC
40 0

32±0.3

Lead wire
AWG24
UL 1007

Rotating direction Air ow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø3.7

39

32±0.3

(15)

38.5
(15)

32±0.3

39

■ Options page: p. 584

Finger guards
Model no.: 109-059, 109-059H

271CATALOG No. C1111B001 '21.2.IT

Splash Proof Fan IP68

40×40×28 mm

San Ace 40W 9WL type

Splash Proof Fan 40 mm sq. DC ■ General Specifications

· Material……………………………………… Frame: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in indoor free air at 60°C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 70 g
· Ingress protection………………………… IP68

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
9WL0412P3J001 cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9WL0412P3G001 12 10.8 to 13.2 -20 to +70 150000/60˚C
9WL0424P3J001 100 0.52 6.24 17500 0.63 22.2 400 1.61 51 (185000/40˚C)
9WL0424P3G001 24 21.6 to 26.4 20 0.06 0.72 3600 0.13 4.6 16.9 0.07 20
100 0.4 4.8 15500 0.56 19.7 310 1.24 47
20 0.06 0.72 3300 0.12 4.2 14.0 0.06 18
100 0.26 6.24 17500 0.63 22.2 400 1.61 51
20 0.04 0.96 4000 0.14 5.1 20.9 0.08 22
100 0.2 4.8 15500 0.56 19.7 310 1.24 47
20 0.04 0.96 3000 0.11 3.8 11.6 0.05 16

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note: Sensor and control options are available for selection. Refer to the table on p. 637.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9WL0412P3J001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
1.8 450 1.8 450 13.2 V 20000
1.6 400 18000
1.6 400 PWM duty cycle 16000 17500 min-1
1.4 350 100% 14000
1.4 350 12 V 12000
Static pressure 10000
1.2 300 Static pressure1.2 300 8000
6000
1.0 250 Fan speed1.0 2504000
2000
0.8 200 0.8 200 10.8 V
0.6 150 50%
0.6 150

0.4 100 20% 0.4 100

0.2 50 0.2 50

0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 (m3/min) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 (m3/min) 0 100 (%)
PWM duty cycle
0 5 10 15 20 25 (CFM) 0 5 10 15 20 25 (CFM)
Air ow Air ow

272 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9WL0412P3G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
1.8 450 1.8 450 20000
18000
1.6 400 1.6 400 13.2 V 16000
1.4 350 14000
Static pressure 1.4 350 PWM duty cycle Static pressure 12000 15500 min-1
1.2 300 100% 10000
1.2 300 12 V 8000
Fan speed 6000 Splash Proof Fan 40 mm sq. DC
1.0 250 1.0 250 4000
2000
0.8 200 0.8 200 10.8 V
0.6 150
0.6 150 50%
0.4 100 0.4 100
20%
0.2 50 0.2 50

0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 (m3/min) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 (m3/min) 0 100 (%)
PWM duty cycle
0 5 10 15 20 25 (CFM) 0 5 10 15 20 25 (CFM)
Air ow Air ow

9WL0424P3J001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
1.8 450 1.8 450 26.4 V 20000
1.6 400 18000
1.6 400 PWM duty cycle 16000 17500 min-1
1.4 350 100% 14000
Static pressure Static pressure 1.4 350 24 V 12000
10000
1.2 300 1.2 300 Fan speed 8000
6000
1.0 250 1.0 250 4000
2000
0.8 200 50% 0.8 200 21.6 V
0.6 150
0.6 150

0.4 100 20% 0.4 100
0.2 50
0.2 50

0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 (m3/min) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 (m3/min) 0 100 (%)
PWM duty cycle
0 5 10 15 20 25 (CFM) 0 5 10 15 20 25 (CFM)
Air ow Air ow

9WL0424P3G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
1.8 450 PWM duty cycle 1.8 450 20000
1.6 400 100% 18000
1.4 350 1.6 400 26.4 V 16000 15500 min-1
1.2 300 50% 1.4 350 14000
Static pressure 1.0 250 Static pressure 12000
0.8 200 20% 1.2 300 24 V Fan speed 10000
0.6 150 0.1 0.2 0.3 0.4 0.5 0.6 0.7 (m3/min) 8000
0.4 100 1.0 250 6000
0.2 50 5 10 15 20 25 (CFM) 4000
Air ow 0.8 200 21.6 V 2000
00 0.6 150
0
0.4 100

0.2 50

0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 (m3/min) 0 100 (%)
PWM duty cycle
0 5 10 15 20 25 (CFM)
Air ow

273CATALOG No. C1111B001 '21.2.IT

■ Dimensions (unit: mm)

8-ø3.5±0.3

Mounting hole

+30
320 0

Splash Proof Fan 40 mm sq. DC 32±0.3 Lead wire (10) 4±0.3
40±0.5 AWG28
40±0.5 UL 3266 4±0.3
32±0.3 Rotating direction
28±0.5

Air ow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø3.7

39

32±0.3

(17.6)

40
(17.6)

32±0.3

39

■ Options page: p. 584

Finger guards
Model no.: 109-059, 109-059H

274 CATALOG No. C1111B001 '21.2.IT

Splash Proof Fan IP68

60×60×25 mm

San Ace 60W 9WPA type

■ General Specifications Splash Proof Fan 60 mm sq. DC

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in indoor free air at 60°C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 110 g
· Ingress protection………………………… IP68

■ Specifications

The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
9WPA0612P4G001
9WPA0624P4G001 12 10.8 to 13.2 100 0.93 11.16 12000 1.52 53.7 357 1.44 56 -20 to +70 40000/60˚C
20 0.09 1.08 3500 0.43 15.1 30 0.12 22 (70000/40˚C)
24 21.6 to 26.4 100 0.46 11.04 12000 1.52 53.7 357 1.44 56
20 0.05 1.2 3500 0.43 15.1 30 0.12 22

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note: Sensor and control options are available for selection. Refer to the table on p. 639.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9WPA0612P4G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC 12000 min-1
PWM frequency: 25 kHz
2.0 500 2.0 500 13.2 V 12000
12 V
1.5 400 PWM duty cycle 1.5 400 10.8 V 10000
100%
Static pressure300 300 8000
Static pressure1.050%1.0
20% 6000
Speed200200
0.5 100 4000
0.5 100
2000

0 0 0.25 0.5 0.75 1.0 1.25 1.5 1.75 (m3/min) 0 0 0.25 0.5 0.75 1.0 1.25 1.5 1.75 (m3/min) 0 100 (%)
0 10 20 30 40 50 60 (CFM) 0 10 20 30 40 50 60 (CFM) PWM duty cycle
Air ow Air ow

275CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9WPA0624P4G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC 12000 min-1
PWM frequency: 25 kHz
2.0 500 2.0 500 26.4 V 12000
24 V
1.5 400 PWM duty cycle 1.5 400 21.6 V 10000
100%
Splash Proof Fan 60 mm sq. DC 300 300 Static pressure 8000
Static pressure 1.0 50% 1.0
20% Speed 6000
200 200
0.5 100 4000
0.5 100
2000

0 0 0.25 0.5 0.75 1.0 1.25 1.5 1.75 (m3/min) 0 0 0.25 0.5 0.75 1.0 1.25 1.5 1.75 (m3/min) 0 100 (%)
0 10 20 30 40 50 60 (CFM) 0 10 20 30 40 50 60 (CFM) PWM duty cycle
Air ow Air ow

■ Dimensions (unit: mm) (With ribs)

4-ø4.5±0.3 60±0.5 25±0.5
Mounting hole 50±0.3

(4) (4)

60±0.5 Lead wire
50±0.3 AWG 26
UL 1430
+50
300 0

(10)

Rotating direction Air ow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side

59

50±0.3
29.7

4-ø4.5

62.7
29.7
50±0.3
59

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1003G
Finger guards
Model no.: 109-139E, 109-139H

276 CATALOG No. C1111B001 '21.2.IT

Splash Proof Fan IP68

60×60×25 mm

San Ace 60W 9WL type

■ General Specifications Splash Proof Fan 60 mm sq. DC

· Material……………………………………… Frame: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in indoor free air at 60°C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 120 g
· Ingress protection………………………… IP68

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
9WL0612P4S001 cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9WL0612P4J001 12 10.8 to 13.2 -20 to +70 180000/60˚C
9WL0612P4H001 100 0.67 8.04 11000 1.4 49.4 300 1.204 53 (215000/40˚C)
9WL0624P4S001 24 21.6 to 26.4 20 0.06 0.72 2900 0.36 12.7 20.8 0.083 20
9WL0624P4J001 100 0.39 4.68 8650 1.1 38.8 182 0.73 47
9WL0624P4H001 20 0.03 0.36 1150 0.13 4.8 3.3 0.013 14
100 0.17 2.04 6150 0.78 27.5 97 0.389 36
20 0.03 0.36 1350 0.17 6.0 4.7 0.018 14
100 0.34 8.16 11000 1.4 49.4 300 1.204 53
20 0.03 0.72 2900 0.36 12.7 20.8 0.083 20
100 0.19 4.56 8650 1.1 38.8 182 0.73 47
20 0.02 0.48 2200 0.28 9.8 12.0 0.048 17
100 0.08 1.92 6150 0.78 27.5 97 0.389 36
20 0.02 0.48 1300 0.16 5.6 4.3 0.017 14

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note: Sensor and control options are available for selection. Refer to the table on p. 638.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9WL0612P4S001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
1.6 400 1.6 400 12000
11000
1.4 350 1.4 350 10000 11000 min-1
1.2 300 1.2 300 9000
1.0 250 PWM duty cycle 1.0 250 13.2 V 8000
100% 12 V 7000
Static pressure 6000
0.8 200 Static pressure0.8 200 10.8 V 5000
4000
Fan speed 3000
0.6 150 50% 0.6 150 2000
0.4 100 1000
0.4 100

0.2 50 0.2 50
20%
0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 (m3/min) 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 (m3/min) 0 100 (%)
PWM duty cycle
0 10 20 30 40 50 (CFM) 0 10 20 30 40 50 (CFM)
Air ow Air ow

277CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9WL0612P4J001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
1.2 300 1.2 300 10000
9000
1.0 250 1.0 250 8000 8650 min-1
0.8 200 0.8 200 7000
Splash Proof Fan 60 mm sq. DC 0.6 150 PWM duty cycle Static pressure 0.6 150 13.2 V Fan speed
Static pressure 100% 0.4 100 12 V 6000
10.8 V 5000
4000
0.4 100 3000
2000
0.2 50 50% 0.2 50 1000

20% 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 (m3/min) 0 100 (%)
0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 (m3/min) PWM duty cycle
0 10 20 30 40 50 (CFM)
0 10 20 30 40 50 (CFM) Air ow
Air ow

9WL0612P4H001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
0.5 125 0.5 125 7000

0.4 100 PWM duty cycle 0.4 100 13.2 V 6000 6150 min-1
0.3 75 100% 0.3 75 12 V
Static pressure Static pressure 0.2 50 5000
10.8 V Fan speed
4000

0.2 50 3000

0.1 25 50% 0.1 25 2000
20%
1000

0 0 0.10.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min) 0 100 (%)
PWM duty cycle
0 5 10 15 20 25 30 35 (CFM) 0 5 10 15 20 25 30 35 (CFM)
Air ow Air ow

9WL0624P4S001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
1.6 400 1.6 400 12000
11000
1.4 350 1.4 350 10000 11000 min-1
1.2 300 1.2 300 9000
Static pressure 1.0 250 PWM duty cycle Static pressure 1.0 250 26.4 V 8000
100% 0.8 200 24 V 7000
6000
0.8 200 21.6 V Fan speed 5000
4000
0.6 150 50% 0.6 150 3000
0.4 100 2000
0.4 100 1000

0.2 50 0.2 50
20%
0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 (m3/min) 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 (m3/min) 0 100 (%)
PWM duty cycle
0 10 20 30 40 50 (CFM) 0 10 20 30 40 50 (CFM)
Air ow Air ow

9WL0624P4J001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
1.2 300 1.2 300 10000
9000
1.0 250 PWM duty cycle 1.0 250 8000 8650 min-1
0.8 200 100% 0.8 200 7000
Static pressure Static pressure 0.6 150 26.4 V 6000
0.6 150 0.4 100 24 V Fan speed 5000
21.6 V 4000
3000
0.4 100 2000
1000
0.2 50 50% 0.2 50

20%

0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 (m3/min) 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 (m3/min) 0 100 (%)
PWM duty cycle
0 10 20 30 40 50 (CFM) 0 10 20 30 40 50 (CFM)
Air ow Air ow

278 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9WL0624P4H001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
0.5 125 PWM duty cycle 0.5 125 7000
100%
0.4 100 0.4 100 26.4 V 6000 6150 min-1
0.3 75 24 V
0.3 75 0.2 50
Static pressure 21.6 V 5000
Static pressure
Fan speed 4000 Splash Proof Fan 60 mm sq. DC

0.2 50 3000

0.1 25 50% 0.1 25 2000
20%
1000

0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.91.0 (m3/min) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min) 0 100 (%)
PWM duty cycle
0 5 10 15 20 25 30 35 (CFM) 0 5 10 15 20 25 30 35 (CFM)
Air ow Air ow

■ Dimensions (unit: mm)

8-ø4.3±0.3

Mounting hole

60±0.5 +50
50±0.3 300 0

50±0.3 (10) 4±0.3 4±0.3
60±0.5
Lead wire 25±0.5
Rotating direction AWG26
UL 1430

Air ow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø4.5

59

50±0.3

29.7

62.7
29.7

50±0.3

59

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1003G
Finger guards
Model no.: 109-139E, 109-139H

279CATALOG No. C1111B001 '21.2.IT

Splash Proof Fan IP68

60×60×25 mm

San Ace 60W 9WP type

Splash Proof Fan 60 mm sq. DC ■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in indoor free air at 60°C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow
· Mass………………………………………… 110 g
· Ingress protection………………………… IP68

■ Specifications

The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9WP0612G401 [˚C] [h]
10.2 to 13.2 0.21 2.52 5600 0.78 27.5 87.3 0.351 39
9WP0612D401 12 -20 to +60 40000/60˚C
9WP0612H401 0.21 2.52 5150 0.72 25 37 (70000/40˚C)
9WP0624J401 10.2 to 13.8 0.11 1.32 3800 0.53 18.7 28
9WP0624G401 0.2 4.8 7600 1.06 37.1 73.5 0.3 44 -20 to +70 60000/60˚C
9WP0624H401 21.6 to 26.4 0.13 3.12 5600 0.78 27.5 40.2 0.161 39 (90000/40˚C)
9WP0648H401 24 20.4 to 27.6 0.06 1.44 3800 0.53 18.7 155.0 0.622 28
0.04 1.92 3800 0.53 18.7 87.3 0.351 28 -20 to +60 40000/60˚C
48 40 to 53 40.2 0.161 (70000/40˚C)
40.2 0.161
-20 to +70 60000/60˚C
(90000/40˚C)

Note: Sensor and control options are available for selection. Refer to the table on pp. 638 to 639.

■ Airflow - Static Pressure Characteristics

9WP0612G401 With pulse sensor 9WP0612D401 With pulse sensor 9WP0612H401 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.45 110 0.40 100 0.25 60

0.40 100 0.35 0.20 50 13.8 V
90 0.30 80 12 V
Static pressure0.358013.2 V 13.8 V 0.15 40 10.2 V
Static pressure0.307012 V 30
Static pressure10.2 V0.25 60
0.25 60 0.20 12 V 0.10
0.15 40 10.2 V 20
0.20 50
0.15 40 0.05 10
30
0.10 20 0.10 20
0.05
0.05 10

0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 (m3/min) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 (m3/min) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 (m3/min)

0 5 10 15 20 25 30 (CFM) 0 5 10 15 20 25 30 (CFM) 0 5 10 15 20 25 (CFM)
Air ow Air ow
Air ow

280 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics

9WP0624J401 With pulse sensor 9WP0624G401 With pulse sensor 9WP0624H401 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.8 200 0.45 110 0.25 60

0.7 180 0.40 100 0.20 50 27.6 V
24 V
0.6 160 26.4 V 0.35 90 27.6 V 0.15 40 20.4 V
Static pressure 140 Static pressure 80 24 V 30Static pressure
0.5 120 24 V 0.30 70
21.6 V 0.10 Splash Proof Fan 60 mm sq. DC
0.4 100 0.25 60 20

0.3 80 0.20 50 20.4 V 0.05 10

60 0.15 40
40 30
0.2 0.10 20

0.1 20 0.05 10

0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 (m3/min) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 (m3/min) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 (m3/min)

0 5 10 15 20 25 30 35 40 45 (CFM) 0 5 10 15 20 25 30 (CFM) 0 5 10 15 20 25 (CFM)
Air ow Air ow
Air ow

9WP0648H401 With pulse sensor
Operating voltage range

Static pressure(inch H2O) (Pa) 53 V
48 V
0.25 60
40 V
0.20 50

0.15 40
30

0.10
20

0.05 10

0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 (m3/min)
0 5 10 15 20 25 (CFM)
Air ow

■ Dimensions (unit: mm) (With ribs) 4-ø4.3±0.3 25±0.5

+1 Mounting hole (3) (3)
60 0
Lead wire
50±0.3 AWG24
UL 1007
+1
60 0 +50
300 0
50±0.3

(10)

Rotating direction Air ow direction

281CATALOG No. C1111B001 '21.2.IT

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø4.5

59

50±0.3

29.7

Splash Proof Fan 60 mm sq. DC
62.7
29.7
50±0.3
59
■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1003G
Finger guards
Model no.: 109-139E, 109-139H

282 CATALOG No. C1111B001 '21.2.IT

Splash Proof Fan IP68

80×80×25 mm

San Ace 80W 9WPA type

■ General Specifications Splash Proof Fan 80 mm sq. DC

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in indoor free air at 60°C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 130 g
· Ingress protection………………………… IP68

■ Specifications

The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
9WPA0812P4G001
9WPA0824P4G001 12 10.8 to 13.2 100 0.71 8.52 8250 2.32 81.9 210 0.84 54 -20 to +70 40000/60˚C
20 0.07 0.84 2400 0.67 23.6 18.2 0.073 21 (70000/40˚C)
24 21.6 to 26.4 100 0.36 8.64 8250 2.32 81.9 210 0.84 54
20 0.05 1.2 2400 0.67 23.6 18.2 0.073 21

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note: Sensor and control options are available for selection. Refer to the table on p. 639.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9WPA0812P4G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
240 PWM duty cycle 240 13.2 V 10000
0.9 220 100% 0.9 220 12 V 9000
10.8 V 8000
0.8 200 50% 0.8 200 7000 8250 min-1
0.7 180 20% 180 0.5 1.0 1.5 2.0 2.5 (m3/min)
Static pressure160 0.7 160 20 40 60 80 (CFM) 6000
0.6 Static pressure1400.5 1.0 1.5 2.0 2.5 (m3/min)0.6140 5000
0.5 120 20 40 60 80 (CFM) Air ow 4000
Speed0.5 1203000
0.4 100 Air ow 0.4 100 2000
0.3 80 80 1000
60 0.3 60
0.2 40 0.2 40
0.1 20
0.1 20
00
00 0 100 (%)
PWM duty cycle
0 0

283CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9WPA0824P4G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
240 PWM duty cycle 240 26.4 V 10000
0.9 220 100% 0.9 220 24 V 9000
21.6 V 8000
0.8 200 50% 0.8 200 7000 8250 min-1
0.7 180 20% 180 0.5 1.0 1.5 2.0 2.5 (m3/min)
Splash Proof Fan 80 mm sq. DC 160 Static pressure 0.7 160 20 40 60 80 (CFM) 6000
Static pressure 0.6 140 0.5 1.0 1.5 2.0 2.5 (m3/min) 0.6 140 Speed 5000
0.5 120 20 40 60 80 (CFM) Air ow 4000
0.5 120 3000
0.4 100 Air ow 0.4 100 2000
0.3 80 80 1000
60 0.3 60
0.2 40 0.2 40
0.1 20
0.1 20
00
00 0 100 (%)
PWM duty cycle
0 0

■ Dimensions (unit: mm) (With ribs)

4-ø4.5±0.3 80±0.5 25.2±0.5
Mounting hole 71.5±0.3 (4) (4)

80±0.5 Lead wire
71.5±0.3 AWG 26
UL 1430
+50
300 0

(10)

Rotating direction Air ow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side

71.5±0.3

4-ø4.5

ø90
78.5
71.5±0.3

78.5 page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1002G
■ Options

Finger guards
Model no.: 109-049E, 109-049H, 109-049C

284 CATALOG No. C1111B001 '21.2.IT

Splash Proof Fan IP68

80×80×25 mm

San Ace 80W 9WL type

■ General Specifications Splash Proof Fan 80 mm sq. DC

· Material……………………………………… Frame: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in indoor free air at 60°C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown

(For models without PWM control function, there is no speed control wiring.)
· Mass………………………………………… 150 g
· Ingress protection………………………… IP68

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
9WL0812P4J001 cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9WL0812P4G001 12 10.8 to 13.2 -20 to +70 180000/60˚C
9WL0812P4H001 100 0.6 7.2 7400 2.07 73.0 177 0.71 49 (215000/40˚C)
9WL0824P4J001 24 21.6 to 26.4 20 0.06 0.72 1800 0.5 17.6 10.4 0.04 16
9WL0824P4G001 100 0.3 3.6 5500 1.54 54.3 98 0.39 43
9WL0824P4H001 25 0.05 0.6 1400 0.39 13.7 6.3 0.02 14
100 0.12 1.44 3700 1.03 36.3 44 0.17 31
25 0.04 0.48 1100 0.3 10.5 3.9 0.01 13
100 0.28 6.72 7400 2.07 73.0 177 0.71 49
20 0.05 1.2 2400 0.67 23.6 18.6 0.07 22
100 0.14 3.36 5500 1.54 54.3 98 0.39 43
20 0.02 0.48 1200 0.33 11.6 4.6 0.01 13
100 0.05 1.2 3700 1.03 36.3 44 0.17 31
30 0.02 0.48 1100 0.3 10.5 3.9 0.01 13

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

The models listed below have pulse sensors.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
9WL0812L4001
9WL0824F4001 12 8 to 13.2 0.06 0.72 2300 0.64 22.6 17 0.068 22 -20 to +70 180000/60˚C
9WL0824L4001 12 to 26.4 0.045 1.08 3300 0.92 32.5 35 0.14 29 (215000/40˚C)
24 14 to 26.4 0.03 0.72 2300 0.64 22.6 17 0.068 22

Note: Sensor and control options are available for selection. Refer to the table on p. 638.

285CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9WL0812P4J001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
0.8 200 PWM duty cycle 0.8 200 13.2 V 8000
100% 12 V 7400 min-1
0.7 180 0.7 180 10.8 V 7000
160 160
Splash Proof Fan 80 mm sq. DC 0.6 140 Static pressure 0.6 140 6000
Static pressure
0.5 120 0.5 120 Fan speed 5000

0.4 100 0.4 100 4000

0.3 80 60% 0.3 80 3000
60 60
0.2 40 0.2 40 2000

0.1 20 20% 0.1 20 1000

00 0.5 1.0 1.5 2.0 2.5 (m3/min) 00 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 80 (CFM) 0 20 40 60 80 (CFM)
Air ow Air ow

9WL0812P4G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
120 PWM duty cycle 120 13.2 V 6000
0.45 110 100% 0.45 110 12 V 5500 min-1
0.40 100 0.40 100 10.8 V
90 60% 90 5000
80 25% 80 0.5 1.0 1.5 2.0 (m3/min)
Static pressure 0.35 70 Static pressure 0.35 70 10 20 30 40 50 60 70 (CFM) Fan speed 4000
0.30 0.5 1.0 1.5 2.0 (m3/min) 0.30
10 20 30 40 50 60 70 (CFM) Air ow
0.25 60 0.25 60 3000
0.20 50 Air ow 0.20 50
0.15 40 0.15 40
30 30 2000
20 20
0.10 0.10 1000

0.05 10 0.05 10

00 00 0 100 (%)
PWM duty cycle
0 0

9WL0812P4H001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
0.24 60 PWM duty cycle 0.24 60 13.2 V 4000
0.22 55 100% 0.22 55 12 V 3700 min-1
0.20 50 0.20 50 10.8 V 3500
0.18 45 60% 0.18 45
Static pressure 0.16 40 25% Static pressure 0.16 40 0.2 0.4 0.6 0.8 1.0 1.2 (m3/min) 3000
0.14 35 0.2 0.4 0.6 0.8 1.0 1.2 (m3/min) 0.14 35 5 10 15 20 25 30 35 40 (CFM)
0.12 30 5 10 15 20 25 30 35 40 (CFM) 0.12 30 Fan speed 2500
0.10 25 0.10 25 Air ow
0.08 20 Air ow 0.08 20 2000
0.06 15 0.06 15
0.04 10 0.04 10 1500
0.02 5 0.02 5
1000
00 00
500
0 0
0 100 (%)
PWM duty cycle

9WL0824P4J001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
0.8 200 PWM duty cycle 0.8 200 26.4 V 8000
100% 24 V
0.7 180 0.7 180 21.6 V 7000 7400 min-1

Static pressure 0.6 160 Static pressure 0.6 160 6000
140 140
0.5 120 0.5 120 Fan speed
5000

0.4 100 0.4 100 4000

0.3 80 60% 0.3 80 3000
60 60
0.2 40 0.2 40 2000

0.1 20 20% 0.1 20 1000

00 0.5 1.0 1.5 2.0 2.5 (m3/min) 00 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 80 (CFM) 0 20 40 60 80 (CFM)
Air ow Air ow

286 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9WL0824P4G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
120 PWM duty cycle 120 26.4 V 6000
0.45 110 100% 0.45 110 24 V 5500 min-1
0.40 100 0.40 100 21.6 V
90 60% 90 5000
80 20% 80 0.5 1.0 1.5 2.0 (m3/min)
Static pressure 0.35 70 Static pressure 0.35 70 10 20 30 40 50 60 70 (CFM) Fan speed 4000 Splash Proof Fan 80 mm sq. DC
0.30 0.5 1.0 1.5 2.0 (m3/min) 0.30
10 20 30 40 50 60 70 (CFM) Air ow
0.25 60 0.25 60 3000
0.20 50 Air ow 0.20 50
0.15 40 0.15 40
30 30 2000
20 20
0.10 0.10 1000

0.05 10 0.05 10

00 00 0 100 (%)
PWM duty cycle
0 0

9WL0824P4H001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
0.24 60 PWM duty cycle 0.24 60 26.4 V 4000
0.22 55 100% 0.22 55 24 V 3700 min-1
0.20 50 0.20 50 21.6 V 3500
0.18 45 70% 0.18 45
Static pressure 0.16 40 30% Static pressure 0.16 40 0.2 0.4 0.6 0.8 1.0 1.2 (m3/min) 3000
0.14 35 0.2 0.4 0.6 0.8 1.0 1.2 (m3/min) 0.14 35 5 10 15 20 25 30 35 40 (CFM)
0.12 30 5 10 15 20 25 30 35 40 (CFM) 0.12 30 Fan speed 2500
0.10 25 0.10 25 Air ow
0.08 20 Air ow 0.08 20 2000
0.06 15 0.06 15
0.04 10 0.04 10 1500
0.02 5 0.02 5
1000
00 00
500
0 0
0 100 (%)
PWM duty cycle

■ Airflow - Static Pressure Characteristics

9WL0812L4001 With pulse sensor 9WL0824F4001 With pulse sensor 9WL0824L4001 With pulse sensor
Operating voltage range Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.10 25 0.18 45 0.10 25
0.16 40
Static pressure 0.08 20 13.2 V Static pressure 0.14 35 26.4 V Static pressure 0.08 20 26.4 V
0.06 15 12 V 0.12 30 24 V 0.06 15 24 V
0.04 10 0.10 25 0.04 10
0.02 5 8V 0.08 20 12 V 0.02 5 14 V
0.06 15
00 0.2 0.4 0.6 0.8 (m3/min) 0.04 10 0.2 0.4 0.6 0.8 1.0 1.2 (m3/min) 00 0.2 0.4 0.6 0.8 (m3/min)
0.02 5 10 20 30 40 (CFM)
0 5 10 15 20 25 (CFM) Air ow 0 5 10 15 20 25 (CFM)
00

0

Air ow Air ow

287CATALOG No. C1111B001 '21.2.IT

■ Dimensions (unit: mm) (With pulse sensor with PWM control function)

8-ø4.3±0.3

Mounting hole

Splash Proof Fan 80 mm sq. DC +50
300 0
80±0.5
71.5±0.3 71.5±0.3 (10) 4±0.3 4±0.3
80±0.5
Lead wire 25.2±0.5
Rotating direction AWG26
UL 1430

Airflow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø4.5

71.5±0.3

ø90

78.5 71.5±0.3

78.5 page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1002G
■ Options

Finger guards
Model no.: 109-049E, 109-049H, 109-049C

288 CATALOG No. C1111B001 '21.2.IT

Splash Proof Fan IP68

80×80×25 mm

San Ace 80W 9WP type

■ General Specifications Splash Proof Fan 80 mm sq. DC

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in indoor free air at 60°C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow
· Mass………………………………………… 130 g
· Ingress protection………………………… IP68

■ Specifications

The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9WP0812G401 [˚C] [h]
9WP0812H401 10.8 to 13.2 0.38 4.56 4500 1.5 53 80.4 0.323 40
9WP0824S401 12 -20 to +60 40000/60˚C
9WP0824H401 0.13 1.56 (70000/40˚C)
9WP0848S401 10.2 to 13.8 2900 1.03 36.4 35.3 0.142 29 60000/60˚C
2.4
0.1 3400 1.2 42.4 48.0 0.193 34 (90000/40˚C)
24 20.4 to 27.6 1.68 40000/60˚C

0.07 2.88 2900 1.03 36.4 35.3 0.142 29 -20 to +70 (70000/40˚C)
60000/60˚C

48 40.8 to 55.2 0.06 3400 1.2 42.4 48.0 0.193 34 (90000/40˚C)
40000/60˚C

(70000/40˚C)

Note: Sensor and control options are available for selection. Refer to the table on p. 639.

■ Airflow - Static Pressure Characteristics

9WP0812G401 With pulse sensor 9WP0812H401 With pulse sensor 9WP0824S401 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.40 100 0.20 50 70
0.18 0.25 60
0.35 90 0.16 40
80 0.14 0.20 50
0.30 70 0.12 30 13.8 V 27.6 V
Static pressure 13.2 V 0.10 12 V 0.15 40 24 V
0.25 60 Static pressure12 V0.08 2010.2 V 30 20.4 V
Static pressure0.06
0.20 50 0.04 10 0.5 1.0 0.10
0.02 10 20 30 40 20
0.15 40 10.8 V
00 Air ow 0.05 10
0.10 30
20 0 00
0.05 10
0
0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 (m3/min) 1.5 (m3/min) 0.5 1.0 1.5 (m3/min)
50 (CFM) 50 (CFM)
0 10 20 30 40 50 60 (CFM) 10 20 30 40
Air ow
Air ow

289CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics

9WP0824H401 With pulse sensor 9WP0848S401 With pulse sensor

Operating voltage range Operating voltage range

Splash Proof Fan 80 mm sq. DC(inch H2O) (Pa) 27.6 V Static pressure(inch H2O) (Pa) 55.2 V
Static pressure 24 V 48 V
0.20 50 20.4 V 0.30 40.8 V
0.18 70
0.16 40 0.5 1.0 1.5 (m3/min) 0.5 1.0 1.5 (m3/min)
0.14 10 20 30 40 50 (CFM) 0.25 60 10 20 30 40 50 (CFM)
0.12 30
0.10 Air ow 0.20 50 Air ow
0.08 20
0.06 0.15 40
0.04 10 0.10 30
0.02
20
00 0.05 10

0 00

0

■ Dimensions (unit: mm) (With ribs)

80±0.5 4-ø4.3±0.3 25±0.5
71.5±0.3
Mounting hole (3) (3)

80±0.5 +30
71.5±0.3 300 0

Rotating direction (10) Air ow direction
Lead wire
AWG24
UL 1007

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side

71.5±0.3

4-ø4.5

ø90
78.5

71.5±0.3

78.5 page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1002G
■ Options

Finger guards
Model no.: 109-049E, 109-049H, 109-049C

290 CATALOG No. C1111B001 '21.2.IT

Splash Proof Fan IP68

80×80×38 mm

San Ace 80W 9WV type

■ General Specifications Splash Proof Fan 80 mm sq. DC

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in indoor free air at 60°C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 235 g
· Ingress protection………………………… IP68

■ Specifications

The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
9WV0812P1M001
9WV0848P1H001 12 10.2 to 13.8 100 0.75 9 6000 2.29 80.9 169 0.68 51 -20 to +70 40000/60˚C
0 0.09 1.08 1700 0.65 23 13.6 0.05 19 (70000/40˚C)
48 40.8 to 52.8 0.75 36 9700 3.7 131 440 1.77 63
100 0.15 7.2 4500 1.72 60.7 94.7 0.38 43
0

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note: Sensor and control options are available for selection. Refer to the table on p. 640.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9WV0812P1M001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
1.0 250 PWM duty cycle 1.0 250 13.8 V 7000
0.9 100% 0.9 12 V
0.8 200 0.8 200 10.2 V 6000 6000 min-1
0.7 0% 0.7
Static pressure0.6 150 1 2 3 (m3/min) 0.6 150 1 2 3 (m3/min) 5000
Static pressure0.50.520 40 60 80 100 (CFM)
0.4 100 20 40 60 80 100 (CFM) 0.4 100 4000
Fan speed0.3Air ow0.3Air ow
0.2 50 0.2 50 3000
0.1 0.1
2000
00 00 1700 min-1

0 0 1000

0 100 (%)
PWM duty cycle

291CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9WV0848P1H001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
2.0 500 PWM duty cycle 2.0 500 52.8 V 11000
1.6 400 100% 1.6 400 48 V
1.2 300 50% 1.2 300 40.8 V 10000 9700 min-1
0.8 200 0% 0.8 200
Splash Proof Fan 80 mm sq. DC 0.4 100 Static pressure 9000
Static pressure
8000

Fan speed 7000

6000

5000 4500 min-1
4000

0.4 100 3000

2000

00 00 1000

1 2 3 4 (m3/min) 1 2 3 4 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 80 100 120 140 (CFM) 0 20 40 60 80 100 120 140 (CFM)
Air ow Air ow

■ Dimensions (unit: mm) (With ribs)

4-ø4.3±0.3

Mounting hole

Lead wire
AWG24
UL 1430

+30
300 0
80±0.5
71.5±0.3

71.5±0.3 (10)
80±0.5 (4) (4)

Rotating direction 38±0.5

Air ow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side

4-ø4.5

ø90

78.5

71.5±0.3

71.5±0.3 page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1002G
78.5

■ Options

Finger guards
Model no.: 109-049E, 109-049H, 109-049C

292 CATALOG No. C1111B001 '21.2.IT

Splash Proof Fan IP68

92×92×25 mm

San Ace 92W 9WPA type

■ General Specifications Splash Proof Fan 92 mm sq. DC

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in indoor free air at 60°C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 135 g
· Ingress protection………………………… IP68

■ Specifications

The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
9WPA0912P4G001
9WPA0924P4G001 12 10.8 to 13.2 100 0.5 6 5700 2.45 86.5 126 0.51 47 -20 to +70 40000/60˚C
20 0.04 0.5 1200 0.52 18.4 6 0.02 11 (70000/40˚C)
24 21.6 to 26.4 100 0.25 6 5700 2.45 86.5 47
20 0.03 0.7 1200 0.52 18.4 126 0.51 11
6 0.02

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note: Sensor and control options are available for selection. Refer to the table on p. 639.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9WPA0912P4G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
160 PWM duty cycle 160 13.2 V 6000
0.6 100% 0.6 12 V 5700 min-1
10.8 V
140 140 5000
0.5 120 0.5 1.0 1.5 2.0 2.5 3.0 (m3/min)
0.5 120 20 40 60 80 100 (CFM)
Static pressure 0.4 100
0.4 100 Static pressureAir ow 4000
0.3 80
0.3 80 Speed603000

60 50% 0.2 2000
0.2 40 40

0.1 20 20% 0.1 20 1000

0 0 0.5 1.0 1.5 2.0 2.5 3.0 (m3/min) 00 0 100 (%)
0 20 40 60 80 100 (CFM) PWM duty cycle
Air ow 0

293CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9WPA0924P4G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
0.6 160 PWM duty cycle 160 26.4 V 6000
140 100% 0.6 140 24 V 5700 min-1
0.5 120 21.6 V
0.5 120 5000
0.4 100 0.5 1.0 1.5 2.0 2.5 3.0 (m3/min)
Splash Proof Fan 92 mm sq. DC 0.4 100 Static pressure 20 40 60 80 100 (CFM) 4000
Static pressure 0.3 80
0.3 80 60 Air ow Speed 3000

60 50% 0.2 2000
0.2 40 40

0.1 20 20% 0.1 20 1000

0 0 0.5 1.0 1.5 2.0 2.5 3.0 (m3/min) 00 0 100 (%)
0 20 40 60 80 100 (CFM) PWM duty cycle
Air ow 0

■ Dimensions (unit: mm) (With ribs)

4-ø4.5±0.3 92±0.5 25.2±0.5
Mounting hole 82.5±0.3 (4) (4)

92±0.5 Lead wire
82.5±0.3 AWG 26
UL 1430
+50
300 0

(10)

Rotating direction Air ow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side Outlet side
90.5 90.5

4-ø4.5 4-ø4.5

ø97 ø108
90.5
82.5±0.3

90.5
82.5±0.3

82.5±0.3 82.5±0.3

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1001G
Finger guards
Model no.: 109-099E, 109-099H, 109-099C

294 CATALOG No. C1111B001 '21.2.IT

Splash Proof Fan IP68

92×92×25 mm

San Ace 92W 9WL type

■ General Specifications Splash Proof Fan 92 mm sq. DC

· Material……………………………………… Frame: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in indoor free air at 60°C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown

(For models without PWM control function, there is no speed control wiring.)
· Mass………………………………………… 170 g
· Ingress protection………………………… IP68

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
9WL0912P4J001 cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9WL0912P4G001 12 10.8 to 13.2 -20 to +70 180000/60˚C
9WL0912P4S001 100 0.42 5.04 5000 2.2 77.7 105 0.42 44 (215000/40˚C)
9WL0912P4H001 24 21.6 to 26.4 20 0.04 0.48 1200 0.52 18.4 6.04 0.024 11
9WL0924P4J001 100 0.3 3.6 4400 1.93 68.2 81 0.33 40
9WL0924P4S001 20 0.04 0.48 1000 0.43 15.1 4.18 0.016 8
9WL0924P4H001 100 0.22 2.64 3850 1.69 59.7 62.1 0.25 37
30 0.04 0.48 1400 0.61 21.5 8.21 0.032 13
100 0.15 1.8 3150 1.38 48.7 41.6 0.17 32
30 0.04 0.48 1100 0.48 16.9 5.07 0.02 9
100 0.21 5.04 5000 2.2 77.7 44
20 0.02 0.48 1100 0.48 16.9 105 0.42 9
100 0.11 2.64 3850 1.69 59.7 5.07 0.02 37
30 0.02 0.48 1300 0.57 20.1 62.1 0.25 12
100 0.07 1.68 3150 1.38 48.7 7.08 0.028 32
30 0.02 0.48 1000 0.43 15.1 41.6 0.17 8
4.18 0.016

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

The models listed below have pulse sensors.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
9WL0912M4001
9WL0924F4001 12 10.2 to 13.8 0.08 0.96 2400 1.05 37.1 24.1 0.097 24 180000/60˚C
9WL0924M4001 0.05 1.2 2800 1.22 43.1 32.8 0.13 29 (215000/40˚C)
24 20.4 to 27.6 0.04 0.96 2400 1.05 37.1 24.1 0.097 24 -20 to +70

Note: Sensor and control options are available for selection. Refer to the table on p. 638.

295CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9WL0912P4J001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC 5000 min-1
PWM frequency: 25 kHz
120 PWM duty cycle 120 13.2 V 5000
0.45 100% 0.45 12 V
10.8 V
0.40 100 50% 0.40 100 4000
20%
Splash Proof Fan 92 mm sq. DC 0.35 80 Static pressure 0.35 80 Fan speed 3000
Static pressure 0.30 0.30

0.25 60 0.25 60 2000
0.20 0.20
0.15 40 0.15 40

0.10 20 0.10 20 1000
0.05 0.05

0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 100 (%)
PWM duty cycle
0 10 20 30 40 50 60 70 80 (CFM) 0 10 20 30 40 50 60 70 80 (CFM)
Air ow Air ow

9WL0912P4G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) (inch H2O) (Pa) (min-1) Voltage: 12 VDC

120 12 VDC 120 PWM duty cycle 100% 5000 PWM frequency: 25 kHz
0.45 0.45
PWM duty cycle 13.2 V 4400 min-1
0.40 100 100% 0.40 100 12 V 4000
10.8 V
Static pressure 0.35 80 50% Static pressure 0.35 80 Fan speed 3000
0.30 20% 0.30

0.25 60 0.25 60 2000
0.20 0.20
0.15 40 0.15 40

0.10 20 0.10 20 1000
0.05 0.05

0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 100 (%)
PWM duty cycle
0 10 20 30 40 50 60 70 80 (CFM) 0 10 20 30 40 50 60 70 80 (CFM)
Air ow Air ow

9WL0912P4S001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
80 PWM duty cycle 80 13.2 V 5000
0.30 100% 0.30 12 V
Static pressure Static pressure 10.8 V Fan speed 4000 3850 min-1
0.25 60 50% 0.25 60 3000
0.20 30% 0.20
0.15 40 0.15 40 2000

0.10 0.10 1000
20 20

0.05 0.05

00 0.5 1.0 1.5 2.0 (m3/min) 00 0.5 1.0 1.5 2.0 (m3/min) 0 100 (%)
PWM duty cycle
0 10 20 30 40 50 60 70 (CFM) 0 10 20 30 40 50 60 70 (CFM)
Air ow Air ow

9WL0912P4H001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
60 60 13.2 V 5000
12 V
Static pressure 0.20 50 PWM duty cycle Static pressure 0.20 50 10.8 V Fan speed 4000
0.15 40 100% 3000 3150 min-1
0.15 40
30 30 2000
0.10
50% 0.10 1000
20 30% 20
0.05 10
0.05 10

00 0.5 1.0 1.5 2.0 (m3/min) 00 0.5 1.0 1.5 2.0 (m3/min) 0 100 (%)
PWM duty cycle
0 10 20 30 40 50 60 70 (CFM) 0 10 20 30 40 50 60 70 (CFM)
Air ow Air ow

296 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9WL0924P4J001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC 5000 min-1
PWM frequency: 25 kHz
120 PWM duty cycle 120 26.4 V 5000
0.45 100% 0.45 24 V
21.6 V
0.40 100 0.40 100 4000

Static pressure 0.35 80 Static pressure 0.35 80 Fan speed 3000 Splash Proof Fan 92 mm sq. DC
0.30 0.30

0.25 60 0.25 60 2000
0.20 0.20
0.15 40 50% 0.15 40
0.10 20
0.05 20% 0.10 20 1000
0.5 1.0 1.5 2.0 2.5 (m3/min) 0.05
00
0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 100 (%)
0 10 20 30 40 50 60 70 80 (CFM) PWM duty cycle
Air ow 0 10 20 30 40 50 60 70 80 (CFM)
Air ow

9WL0924P4S001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
80 PWM duty cycle 80 26.4 V 5000
0.30 100% 0.30 24 V
Static pressure Static pressure 21.6 V 4000 3850 min-1
0.25 60 0.25 60 Fan speed 3000
0.20 0.20
0.15 40 0.15 40 2000

0.10 50% 0.10 1000
20 30% 20

0.05 0.05

00 0.5 1.0 1.5 2.0 (m3/min) 00 0.5 1.0 1.5 2.0 (m3/min) 0 100 (%)
PWM duty cycle
0 10 20 30 40 50 60 70 (CFM) 0 10 20 30 40 50 60 70 (CFM)
Air ow Air ow

9WL0924P4H001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
60 60 5000

Static pressure 0.20 50 PWM duty cycle Static pressure 0.20 50 26.4 V 4000
0.15 40 100% 3000 3150 min-1
0.15 40 24 V 2000
30 30 21.6 V Fan speed 1000
0.10
0.10 0 100 (%)
20 20 PWM duty cycle

0.05 10 50% 0.05 10
30%

00 0.5 1.0 1.5 2.0 (m3/min) 00 0.5 1.0 1.5 2.0 (m3/min)

0 10 20 30 40 50 60 70 (CFM) 0 10 20 30 40 50 60 70 (CFM)
Air ow Air ow

297CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics

9WL0912M4001 With pulse sensor 9WL0924F4001 With pulse sensor 9WL0924M4001 With pulse sensor
Operating voltage range Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.14 35 0.25 60 0.14 35

Splash Proof Fan 92 mm sq. DC 0.12 30 13.8 V Static pressure 0.20 50 27.6 V Static pressure 0.12 30 27.6 V
Static pressure 0.10 25 12 V 24 V 0.10 25 24 V
0.08 20 10.2 V 0.15 40 20.4 V 0.08 20 20.4 V
0.06 15 30 0.06 15

0.04 10 0.10 0.04 10
20
0.02 5 0.02 5
0.05 10

0 0 0.2 0.4 0.6 0.8 1.0 1.2 (m3/min) 00 0.5 1.0 1.5 (m3/min) 0 0 0.2 0.4 0.6 0.8 1.0 1.2 (m3/min)
0 10 20 30 40 (CFM)
0 10 20 30 40 (CFM) 0 10 20 30 40 50 (CFM) Air ow
Air ow
Air ow

■ Dimensions (unit: mm) (With pulse sensor with PWM control function)

8-ø4.3±0.3

Mounting hole

92±0.5 +50
82.5±0.3 300 0

82.5±0.3 (10) 4±0.3 4±0.3
92±0.5
Lead wire 25.2±0.5
Rotating direction AWG26
UL 1430

Airflow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side 4-ø4.5 Outlet side 4-ø4.5
90.5 90.5

ø97 ø108
90.5

82.5±0.3

90.5

82.5±0.3

82.5±0.3 82.5±0.3

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1001G
Finger guards
Model no.: 109-099E, 109-099H, 109-099C

298 CATALOG No. C1111B001 '21.2.IT

Splash Proof Fan IP68

92×92×25 mm

San Ace 92W 9WP type

■ General Specifications Splash Proof Fan 92 mm sq. DC

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in indoor free air at 60°C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black or Blue Sensor Yellow
· Mass………………………………………… 120 g
· Ingress protection………………………… IP68

■ Specifications

The models listed below have ribs and pulse sensors. For models without ribs, append "1" to the end of model numbers.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
9WP0912S401 [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9WP0912F401 12 6 to 13.8 -20 to +70 40000/60˚C
9WP0924G401 0.27 3.24 3550 1.66 58.6 56.1 0.225 39 (70000/40˚C)
9WP0924S401 24 12 to 27.6 0.14 1.68 2650 1.24 43.8 32.2 0.129 30
9WP0924H401 0.19 4.56 3900 1.76 62.2 66.5 0.267 43 -10 to +70
9WP0924F401 0.15 3.6 3550 1.66 58.6 56.1 0.225 39
9WP0924B401 0.1 2.4 3150 1.45 51.2 44 0.177 33
0.08 1.92 2650 1.24 43.8 32.2 0.129 30
0.05 1.2 2000 0.9 31.8 18.0 0.072 23

Note: Sensor and control options are available for selection. Refer to the table on p. 639.

■ Airflow - Static Pressure Characteristics

9WP0912S401 With pulse sensor 9WP0912F401 With pulse sensor 9WP0924G401 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

80 0.20 50 0.40 100
0.30 70
Static pressure0.25 60 0.15 40 13.8 V 0.35
Static pressure 12 V 0.30 80
Static pressure0.20 5030
0.15 40 13.8 V 0.10 6V 0.25 60 27.6 V
12 V 0.20 24 V
30 20 0.15 40
0.10 20 6V
0.05 10 0.05 10 0.10 20 12 V
0.5 1.0 1.5 2.0 2.5 (m3/min) 0.05
00 20 40 60 80 (CFM)
00 0.5 1.0 1.5 (m3/min) 0 0 0.4 0.8 1.2 1.6 2.0 (m3/min)
0 Air ow
0 10 20 30 40 50 (CFM) 0 10 20 30 40 50 60 70 (CFM)
Air ow
Air ow

299CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics

9WP0924S401 With pulse sensor 9WP0924H401 With pulse sensor 9WP0924F401 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

80 0.25 60 50
0.30 70 0.18
Splash Proof Fan 92 mm sq. DC 0.25 60 Static pressure 0.20 50 27.6 V Static pressure 0.16 40 27.6 V
Static pressure 24 V 0.14
0.20 50 27.6 V 0.15 40 0.12 30 24 V
30 12 V 0.10 12 V
0.15 40 24 V 0.08 20
30 12 V 0.10 0.06
20 0.04 10
0.10 0.02
20 0.05 10
00
0.05 10
0
0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 00 0.5 1.0 1.5 2.0 (m3/min) 0.5 1.0 1.5 (m3/min)
50 60 (CFM)
0 10 20 30 40 50 60 70 80 90 (CFM) 0 10 20 30 40 50 60 70 (CFM) 10 20 30 40
Air ow Air ow
Air ow

9WP0924B401 With pulse sensor
Operating voltage range

(inch H2O) (Pa)

0.12 30

Static pressure 0.10 27.6 V
0.08 20
0.06 24 V
0.04 10 12 V

0.02

0 0 0.2 0.4 0.6 0.8 1.0 1.2 (m3/min)

0 10 20 30 40 (CFM)
Air ow

■ Dimensions (unit: mm) (With ribs)

92±0.5 4-ø4.3±0.3 25±0.5
82.5±0.3
Mounting hole (4) (4)

92±0.5 Lead wire
82.5±0.3 AWG24
UL 1007

+50
300 0

(10)

Rotating direction Air ow direction

300 CATALOG No. C1111B001 '21.2.IT