San Ace 2021

150±0.8■ Dimensions (unit: mm) (With ribs) DC Fan 150 mm sq. DC
135±0.5
4-ø4.5±0.3

Mounting hole

(10)

+30
300 0
Lead wire
AWG22
UL 1430

135±0.5 (6.5) (6.5)
150±0.8
50±0.5
Rotating direction
Airflow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side Outlet side

4-ø4.5 4-ø4.5

ø162 ø178

148±0.5
135±0.3
148±0.5
135±0.3

135±0.3 135±0.3
148±0.5 148±0.5

■ Options page: p. 585

Finger guards
Model no.: 109-1051, 109-1052

201CATALOG No. C1111B001 '21.2.IT

DC Fan ø172 mm DC DC Fan

ø172×147×25 mm

San Ace 172 9E type Sidecut type

■ General Specifications

· Material……………………………………… Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black or Blue Sensor Yellow
· Mass………………………………………… 500 g

■ Specifications

The models listed below have pulse sensors.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
109E4712M401 [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
109E4712L401 12 10.2 to 13.8 -20 to +60 40000/60˚C
109E4724H401 1.3 15.6 2800 5.2 183 92 0.369 51 (70000/40˚C)
109E4724F401 24 20.4 to 27.6 1.0 12.0 2500 4.6 162 73 0.293 48
109E4724M401 1.0 24.0 3400 6.4 226 135 0.542 57
109E4724L401 48 40.8 to 55.2 0.79 19.0 3100 5.8 204 112 0.45 54
109E4748S401 0.58 13.9 2800 5.2 183 92 0.369 51
109E4748H401 0.44 10.6 2500 4.6 162 73 0.293 48
109E4748F401 0.62 29.8 3650 6.8 240 156 0.627 58
109E4748M401 0.52 25.0 3400 6.4 226 135 0.542 57
109E4748L401 0.4 19.2 3100 5.8 204 112 0.45 54
0.32 15.4 2800 5.2 183 92 0.369 51
0.25 12.0 2500 4.6 162 73 0.293 48

Note: Sensor and control options are available for selection. Refer to the table on p. 620.

■ Airflow - Static Pressure Characteristics

109E4712M401 With pulse sensor 109E4712L401 With pulse sensor 109E4724H401 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.45 120 0.40 100 200
110
0.40 100 13.8 V 0.35 90 0.7
12 V 80 0.6 150
0.35 90 10.2 V 0.30 70 13.8 V 0.5 27.6 V
Static pressure80 12 V 24 V
0.30 Static pressure701 2 3 4 5 6 (m3/min)0.25 6010.2 V
0.25 Static pressure6050 100 150 200 (CFM)
Air ow 0.20 50 1 2 3 4 5 6 (m3/min) 0.4 100 20.4 V
0.20 50 50 100 150 200 (CFM) 0.3
0.15 40 0.15 40 Air ow
30
0.10 30 0.10 20 0.2 50
20
0.05 10 0.05 10 0.1

00 00 0 0 1 2 3 4 5 6 7 8 (m3/min)

0 0 0 50 100 150 200 250 300 (CFM)
Air ow

202 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics DC Fan ø172 mm DC

109E4724F401 With pulse sensor 109E4724M401 With pulse sensor 109E4724L401 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.6 150 0.45 120 0.40 100
110
0.5 27.6 V 0.40 100 27.6 V 0.35 90
24 V 24 V 80
Static pressure 0.4 100 Static pressure 0.35 90 20.4 V Static pressure 0.30 70 27.6 V
20.4 V 80 24 V
0.3 0.30 70 1 2 3 4 5 6 (m3/min) 0.25 60 20.4 V
0.25 60 50 100 150 200 (CFM)
Air ow 0.20 50 1 2 3 4 5 6 (m3/min)
0.20 50 50 100 150 200 (CFM)
0.2 50 0.15 40 0.15 40 Air ow
30
0.1 0.10 30 0.10 20
20
0.05 10 0.05 10

0 0 1 2 3 4 5 6 7 (m3/min) 00 00

0 50 100 150 200 250 (CFM) 0 0
Air ow

109E4748S401 With pulse sensor 109E4748H401 With pulse sensor 109E4748F401 With pulse sensor
Operating voltage range Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.8 200 200 0.6 150

0.7 55.2 V 0.7 0.5 55.2 V
0.6 150 48 V
Static pressure 0.6 150 48 V Static pressure 0.5 55.2 V Static pressure 0.4 100
0.5 40.8 V 48 V 40.8 V
0.4 100 0.3
0.4 100 40.8 V
0.3
0.3 0.2 50

0.2 50 0.2 50 0.1

0.1 0.1

0 0 1 2 3 4 5 6 7 8 (m3/min) 0 0 1 2 3 4 5 6 7 8 (m3/min) 0 0 1 2 3 4 5 6 7 (m3/min)

0 50 100 150 200 250 300 (CFM) 0 50 100 150 200 250 300 (CFM) 0 50 100 150 200 250 (CFM)
Air ow Air ow Air ow

109E4748M401 With pulse sensor 109E4748L401 With pulse sensor
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa)

0.45 120 0.40 100
110
0.40 100 55.2 V 0.35 90
48 V 80
Static pressure 0.35 90 40.8 V Static pressure 0.30 70 55.2 V
80 48 V
0.30 70 1 2 3 4 5 6 (m3/min) 0.25 60 40.8 V
0.25 60 50 100 150 200 (CFM)
Air ow 0.20 50 1 2 3 4 5 6 (m3/min)
0.20 50 50 100 150 200 (CFM)
0.15 40 0.15 40 Air ow
30
0.10 30 0.10 20
0.05 20
10 0.05 10

00 00

0 0

203CATALOG No. C1111B001 '21.2.IT

DC Fan ø172 mm DC ■ Dimensions (unit: mm)

ø172±0.8 8-ø4.5±0.4
ø162±0.5
Mounting hol+e50
300 0

(10)
Lead wire

AWG24
UL 1007

55° 55° 7.5±0.4 7.5±0.4
147±0.8 25.4±0.5

Rotating direction Airflow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side
8.5

4-ø4.5

162±0.5
4-R4.25 ø168

55° 55°

147

■ Options page: p. 586

Finger guards
Model no.: 109-319E, 109-319H, 109-320

204 CATALOG No. C1111B001 '21.2.IT

DC Fan DC Fan ø172 mm DC

ø172×150×51 mm

San Ace 172 9HV type Sidecut type

■ General Specifications

· Material……………………………………… Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 800 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
9HV5724P5H001
9HV5748P5G001 24 16 to 30 100 5.0 120 8000 12.3 434 1000 4.02 77 -20 to +70 40000/60˚C
20 0.5 12.0 3000 4.6 162 175 0.7 51 (70000/40˚C)
48 36 to 72 100 5.0 240 10500 16.1 568 1600 6.43 83
20 0.41 19.7 3700 5.6 198 250 1.01 57

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note 1: Sensor and control options are available for selection. Refer to the table on p. 634.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9HV5724P5H001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
1200 PWM duty cycle 1200 30 V 10000
100% 24 V
4.0 4.0 8000 8000 min-1
900 50% 900 16 V
20%
Static pressure3.0 3.0 6000
Static pressure600600
4000
Fan speed2.02.0
2000
1.0 300 1.0 300

00 4 8 12 16 (m3/min) 00 4 8 12 16 (m3/min) 0 100 (%)
PWM duty cycle
0 100 200 300 400 500 (CFM) 0 100 200 300 400 500 (CFM)
Air ow Air ow

205CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example
DC Fan ø172 mm DC
9HV5748P5G001 With pulse sensor with PWM control function
Static pressure
PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
7.0 1800 PWM duty cycle 7.0 1800 72 V 12000
100% 6.0 1500 48 V
6.0 1500 10000 10500 min-1

5.0 1200 Static pressure 5.0 1200 36 V Fan speed 8000

4.0 900 4.0 900 6000
3.0 3.0
50% 2.0 600 4000
600 20%
2.0 1.0 300 2000
1.0 300

0 0 4 8 12 16 20 (m3/min) 0 0 4 8 12 16 20 (m3/min) 0 100 (%)
PWM duty cycle
0 100 200 300 400 500 600 700 (CFM) 0 100 200 300 400 500 600 700 (CFM)
Air ow Air ow

ø172±0.8■ Dimensions (unit: mm)
162±0.5
8-ø4.5±0.3
Mounting hole

10

300 +300
Lead wire
AWG18
UL 1430

55.5° 55.5° 7.5±0.4 7.5±0.4

150±0.8 51±0.8

Rotating direction Air ow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side
8.5

4-ø4.5

162±0.5
4-R4.25 ø168

55.5° 55.5°

147

■ Options

Finger guards page: p. 586

Model no.: 109-319J, 109-319E, 109-319H, 109-320

206 CATALOG No. C1111B001 '21.2.IT

DC Fan DC Fan ø172 mm DC

ø172×150×51 mm

San Ace 172 9SG type Sidecut type

■ General Specifications

· Material……………………………………… Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 760 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
9SG5724P5H61 cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9SG5748P5G01 24 20.4 to 27.6 -20 to +70
9SG5748P5H01 100 2.8 67.2 6500 11.6 410 540 2.16 71
48 36 to 72 0 0.18 4.32 1300 2.32 81.9 30 0.12 28 40000/60˚C
2.91 140 8600 15.46 546 1000 4.02 78 -20 to +60 (70000/40˚C)
100 0.21 10.1 2000 3.59 127 75.1 0.3 40
0 1.62 78 6500 11.6 410 770 3.09 71
0.21 10.1 2000 3.59 127 75.1 0.3 40
100
0

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note 1: Sensor and control options are available for selection. Refer to the table on p. 636.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9SG5724P5H61 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 24 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 24 VDC
PWM frequency: 25 kHz
700 PWM duty cycle 700 27.6 V 7000
2.5 600 100% 6500 min-1
2.5 600 6000
2.0 500 50%
Static pressure 2.0 500 24 V 5000
Static pressure1.5 4000% 20.4 V
300 2 4 6 8 10 12 14 (m3/min) 1.5 400 4000
Fan speed100 200 300 400 500 (CFM)300
1.0 3000
200 Air ow 1.0
200 2000
0.5 100 1000 1300 min-1
0.5 100
00
0 0 0 2 4 6 8 10 12 14 (m3/min) 0 100 (%)
0 100 200 300 400 500 (CFM) PWM duty cycle
Air ow

207CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example
DC Fan ø172 mm DC
9SG5748P5G01 With pulse sensor with PWM control function
Static pressure
PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
5.0 1200 5.0 1200 9000 8600 min-1
8000 2000 min-1
4.0 1000 4.0 1000 72 V 7000
6000
3.0 800 PWM duty cycle Static pressure 3.0 800 48 V Fan speed 5000
100% 600 36 V 4000
3000
600 50% 2.0 2000
2.0 0% 400 1000

400 1.0 200
1.0 200

00 5 10 15 20 (m3/min) 00 5 10 15 20 (m3/min) 0 100 (%)
PWM duty cycle
0 100 200 300 400 500 600 700 (CFM) 0 100 200 300 400 500 600 700 (CFM)
Air ow
Air ow

9SG5748P5H01 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 25 kHz
900 PWM duty cycle 900 48 V/72 V 9000
100% 36 V 8000 2000 min-1
3.0 800 3.0 800 7000
700 50% 700 5 10 15 (m3/min) 6000
Static pressure 0% Static pressure 100 200 300 400 500 (CFM) 5000 6500 min-1
600 600 Fan speed 4000
5 10 15 (m3/min) Air ow 3000
2.0 500 100 200 300 400 500 (CFM) 2.0 500 2000
1000
400 Air ow 400

1.0 300 1.0 300
200 200

100 100 0 100 (%)
00 00 PWM duty cycle

0 0

ø172±0.8■ Dimensions (unit: mm)
162±0.5
8-ø4.5±0.3

Mounting hole

10

+30
300 0

Lead wire
AWG22
UL 1430

55.5° 55.5° 7.5±0.4 7.5±0.4
51±0.8

150±0.8

Rotating direction Air ow direction

208 CATALOG No. C1111B001 '21.2.IT

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side
8.5

4-ø4.5
162±0.5
4-R4.25 ø168

DC Fan ø172 mm DC

55.5° 55.5°

147

■ Options

Finger guards page: p. 586

Model no.: 109-319J, 109-319E, 109-319H, 109-320

209CATALOG No. C1111B001 '21.2.IT

DC Fan ø172 mm DC DC Fan

ø172×150×51 mm

San Ace 172 9GV type Sidecut type

■ General Specifications

· Material……………………………………… Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow
· Mass………………………………………… 800 g

■ Specifications

The models listed below have pulse sensors.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
9GV5724H501 [˚C] [h]
9GV5748H501 24 20.4 to 27.6 4.0 96 6300 11.32 400 690 2.77 74
48 40.8 to 55.2 2.0 96 6300 11.32 400 690 2.77 74 -20 to +70 40000/60˚C
(70000/40˚C)

Note: Sensor and control options are available for selection. Refer to the table on p. 633.

■ Airflow - Static Pressure Characteristics

9GV5724H501 With pulse sensor 9GV5748H501 With pulse sensor
Operating voltage range Operating voltage range

Static pressure(inch H2O) (Pa)27.6 V (inch H2O) (Pa) 55.2 V
Static pressure24 V 48 V
3.5 20.4 V 3.5 40.8 V
800 800
2 4 6 8 10 12 (m3/min) 2 4 6 8 10 12 (m3/min)
3.0 700 100 200 300 400 500 (CFM) 3.0 700 100 200 300 400 500 (CFM)
2.5 600 2.5 600
Air ow Air ow
2.0 500 2.0 500

1.5 400 1.5 400
300 300

1.0 1.0
200 200

0.5 100 0.5 100

00 00

0 0

210 CATALOG No. C1111B001 '21.2.IT

■ Dimensions (unit: mm)ø172±0.8 DC Fan ø172 mm DC
162±0.5
8-ø4.5±0.3

Mounting hole

10
+30
300 0
Lead wire
AWG22
UL 1430

55.5° 55.5° 7.5±0.4 7.5±0.4

51±0.8

150±0.8

Airflow direction

Rotating direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side
8.5

4-ø4.5

162±0.5
4-R4.25 ø168

55.5° 147 55.5°

■ Options

Finger guards page: p. 586

Model no.: 109-319J, 109-319E, 109-319H, 109-320

211CATALOG No. C1111B001 '21.2.IT

DC Fan ø172 mm DC DC Fan

ø172×150×51 mm

San Ace 172 9E type Sidecut type

■ General Specifications

· Material……………………………………… Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black or Blue Sensor Yellow
· Mass………………………………………… 760 g

■ Specifications

The models listed below have pulse sensors.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
109E5712K501 [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
109E5712Y501 12 10.2 to 13.8 -20 to +60
109E5712H501 2.9 34.8 4100 8.5 300 243.0 0.976 60
109E5712F501 24 20.4 to 27.6 2.3 27.6 3800 8 282 210 0.84 60 -20 to +70 40000/60˚C
109E5712M501 1.2 14.4 3050 6.4 226 137.2 0.551 52 (70000/40˚C)
109E5724C501 48 40.8 to 55.2 0.68 8.16 2500 5.1 180 95 0.38 47
109E5724K501 0.48 5.76 2000 4.2 148 67.6 0.271 41 -20 to +60
109E5724H501 2.3 55.2 4800 9.9 350 308.0 1.237 66 -20 to +70
109E5724F501 1.3 31.2 4100 8.5 300 243.0 0.976 60
109E5724M501 0.58 13.92 3050 6.4 226 137.2 0.551 52
109E5748C501 0.35 8.4 2500 5.1 180 95 0.38 47
109E5748K501 0.2 4.8 2000 4.2 148 67.6 0.271 41
109E5748H501 1.2 57.6 4800 9.9 350 308.0 1.237 66
109E5748F501 0.7 33.6 4100 8.5 300 243.0 0.976 60
109E5748M501 0.28 13.44 3050 6.4 226 137.2 0.551 52
0.19 9.12 2500 5.1 180 95 0.38 47
0.11 5.28 2000 4.2 148 67.6 0.271 41

Note 1: Sensor and control options are available for selection. Refer to the table on p. 621.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics

109E5712K501 With pulse sensor 109E5712Y501 With pulse sensor 109E5712H501 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

1.2 300 1.2 300 0.8 200
1.0 250
Static pressure0.8 20013.8 V 1.0 250 13.8 V 0.6 150 13.8 V
Static pressure0.6 15012 V0.8 20012 V 12 V
Static pressure0.4 1000.6 1500.4 100
0.2 50 10.2 V 0.4 100 10.2 V 10.2 V

00 0.2 50 0.2 50
0
246 8 10 (m3/min) 00 2 4 6 8 10 (m3/min) 0 0 1 2 3 4 5 6 7 8 (m3/min)

100 200 300 400 (CFM) 0 100 200 300 400 (CFM) 0 50 100 150 200 250 300 (CFM)
Air ow Air ow Air ow

212 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics DC Fan ø172 mm DC

109E5712F501 With pulse sensor 109E5712M501 With pulse sensor 109E5724C501 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.6 150 13.8 V 0.35 90 1.6 400
12 V 80 1.4 350
0.5 10.2 V 0.30 70 1.2 300 27.6 V
0.4 100 1.0 250 24 V
Static pressure Static pressure 0.25 60 13.8 V Static pressure 0.8 200 20.4 V
0.3 12 V 0.6 150
0.20 50 10.2 V 0.4 100 2 4 6 8 10 12 (m3/min)
0.2 50 100 200 300 400 (CFM)
0.15 40 1 2 3 4 5 6 (m3/min)
0.2 50 30 50 100 150 200 (CFM) 00 Air ow
0.10 20 Air ow
0
0.1 0.05 10

0 0 1 2 3 4 5 6 7 (m3/min) 00

0 50 100 150 200 250 (CFM) 0
Air ow

109E5724K501 With pulse sensor 109E5724H501 With pulse sensor 109E5724F501 With pulse sensor
Operating voltage range Operating voltage range Operating voltage range

Static pressure(inch H2O) (Pa) 27.6 V Static pressure(inch H2O) (Pa) 27.6 V Static pressure(inch H2O) (Pa) 27.6 V
24 V 24 V 24 V
1.2 300 0.8 200 0.6 150 20.4 V
1.0 250 20.4 V 20.4 V
0.8 200 0.6 150 0.5
0.6 150
0.4 100 0.4 100 0.4 100
0.2 50
0.2 50 0.3

0.2 50

0.1

00 2 4 6 8 10 (m3/min) 0 0 1 2 3 4 5 6 7 8 (m3/min) 0 0 1 2 3 4 5 6 7 (m3/min)

0 100 200 300 400 (CFM) 0 50 100 150 200 250 300 (CFM) 0 50 100 150 200 250 (CFM)
Air ow Air ow Air ow

109E5724M501 With pulse sensor 109E5748C501 With pulse sensor 109E5748K501 With pulse sensor
Operating voltage range Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.35 90 1.6 400 1.2 300
80 1.4 350 1.0 250
0.30 70 1.2 300 55.2 V 0.8 200 55.2 V
1.0 250 48 V 0.6 150 48 V
Static pressure 0.25 60 27.6 V Static pressure 0.8 200 40.8 V Static pressure 0.4 100
24 V 0.6 150 0.2 50 40.8 V
0.20 50 20.4 V 0.4 100 2 4 6 8 10 12 (m3/min)
0.2 50 100 200 300 400 (CFM) 00
0.15 40 1 2 3 4 5 6 (m3/min) 0
30 50 100 150 200 (CFM) 00 Air ow
0.10 20 Air ow
0
0.05 10

00 246 8 10 (m3/min)

0 100 200 300 400 (CFM)
Air ow

109E5748H501 With pulse sensor 109E5748F501 With pulse sensor 109E5748M501 With pulse sensor
Operating voltage range Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.8 200 0.6 150 55.2 V 0.35 90
48 V 80
0.6 150 55.2 V 0.5 40.8 V 0.30 70
48 V 0.4 100
Static pressure Static pressure Static pressure 0.25 60 55.2 V
0.3 48 V
0.4 100 40.8 V 0.20 50 40.8 V

0.15 40 1 2 3 4 5 6 (m3/min)
0.2 50 30 50 100 150 200 (CFM)
0.2 50 0.10 20 Air ow

0.1 0.05 10

0 0 1 2 3 4 5 6 7 8 (m3/min) 0 0 1 2 3 4 5 6 7 (m3/min) 00

0 50 100 150 200 250 300 (CFM) 0 50 100 150 200 250 (CFM) 0
Air ow Air ow

213CATALOG No. C1111B001 '21.2.IT

DC Fan ø172 mm DC ■ Dimensions (unit: mm)

ø172±0.8 4-ø4.5±0.3
162±0.5
Mounting hole

10 7.5±0.4 7.5±0.4
51±0.8
300+300

Lead wire
AWG24
UL 1007
or
AWG22
UL 1430

150±0.8

Rotating direction Airflow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side
148

162±0.3
2-R4.25 ø168

8.5 2-ø4.5 page: p. 586

■ Options

Finger guards
Model no.: 109-319E, 109-319H, 109-320

214 CATALOG No. C1111B001 '21.2.IT

DC Fan DC Fan ø172 mm DC

ø172×51 mm

San Ace 172 9E type Round type

■ General Specifications

· Material……………………………………… Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black or Blue Sensor Yellow
· Mass………………………………………… 780 g

■ Specifications

The models listed below have pulse sensors.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [˚C] [h]
109E1712K501 [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
109E1712Y501 12 10.2 to 13.8 -20 to +60
109E1712H501 2.9 34.8 4100 8.5 300 243.0 0.976 55
109E1712F501 24 20.4 to 27.6 2.3 27.6 3800 7.8 276 210.0 0.843 53 -20 to +70 40000/60˚C
109E1712M501 1.2 14.4 3050 6.4 226 137.2 0.551 47 (70000/40˚C)
109E1724C501 48 40.8 to 55.2 0.68 10.8 2500 5.1 180 95.0 0.382 42
109E1724K501 0.48 5.76 2000 4.2 148 67.6 0.271 36 -20 to +60
109E1724H501 2.3 55.2 4800 9.9 350 308.0 1.237 60 -20 to +70
109E1724F501 1.3 31.2 4100 8.5 300 243.0 0.976 55 -20 to +60
109E1724M501 0.58 13.92 3050 6.4 226 137.2 0.551 47 -20 to +70
109E1748C501 0.35 8.4 2500 5.1 180 95 0.382 42
109E1748K501 0.2 4.8 2000 4.2 148 67.6 0.271 36
109E1748H501 1.2 57.6 4800 9.9 350 308.0 1.237 60
109E1748F501 0.7 33.6 4100 8.5 300 243.0 0.976 55
109E1748M501 0.28 13.44 3050 6.4 226 137.2 0.551 47
0.19 9.12 2500 5.1 180 95 0.382 42
0.11 5.28 2000 4.2 148 67.6 0.271 36

Note 1: Sensor and control options are available for selection. Refer to the table on p. 620.
Note 2: The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics

109E1712K501 With pulse sensor 109E1712Y501 With pulse sensor 109E1712H501 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) 13.8 V (inch H2O) (Pa) 13.8 V (inch H2O) (Pa) 13.8 V
12 V 12 V
1.2 300 1.2 300 12 V 0.8 200
1.0 250 10.2 V 1.0 250 10.2 V
0.8 200 0.8 200 0.6 150
Static pressure0.6 150 0.6 150
Static pressure0.4 1000.4 100 0.4 100 10.2 V
Static pressure0.2 500.2 50
0.2 50

00 2 4 6 8 10 (m3/min) 00 2 4 6 8 10 (m3/min) 0 0 1 2 3 4 5 6 7 8 (m3/min)
0 50 100 150 200 250 300 (CFM)
0 100 200 300 400 (CFM) 0 50 100 150 200 250 300 350 (CFM) Air ow
Air ow
Air ow

215CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics
DC Fan ø172 mm DC
109E1712F501 With pulse sensor 109E1712M501 With pulse sensor 109E1724C501 With pulse sensor
Static pressure Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.6 150 0.35 90 1.6 400
80 1.4 350
0.5 13.8 V 0.30 70 1.2 300 27.6 V
1.0 250 24 V
0.4 100 12 V Static pressure 0.25 60 13.8 V Static pressure 0.8 200 20.4 V
0.3 10.2 V 12 V 0.6 150
0.20 50 10.2 V 0.4 100 2 4 6 8 10 12 (m3/min)
0.2 50 100 200 300 400 (CFM)
0.15 40 1 2 3 4 5 6 (m3/min)
0.2 50 30 50 100 150 200 (CFM) 00 Air ow
0.10 20 Air ow
0
0.1 0.05 10

0 0 1 2 3 4 5 6 7 (m3/min) 00

0 50 100 150 200 250 (CFM) 0
Air ow

109E1724K501 With pulse sensor 109E1724H501 With pulse sensor 109E1724F501 With pulse sensor
Operating voltage range Operating voltage range Operating voltage range

Static pressure (inch H2O) (Pa) 27.6 V Static pressure(inch H2O) (Pa) 27.6 V Static pressure(inch H2O) (Pa) 27.6 V
24 V 24 V
1.2 300 0.8 200 0.6 150 24 V
1.0 250 20.4 V 20.4 V 0.5 20.4 V
0.8 200 0.6 150 0.4 100
0.6 150 0.3
0.4 100 0.4 100 0.2 50
0.2 50 0.1
0.2 50

00 2 4 6 8 10 (m3/min) 0 0 1 2 3 4 5 6 7 8 (m3/min) 0 0 1 2 3 4 5 6 7 (m3/min)
0 50 100 150 200 250 300 (CFM)
0 100 200 300 400 (CFM) Air ow 0 50 100 150 200 250 (CFM)
Air ow Air ow

109E1724M501 With pulse sensor 109E1748C501 With pulse sensor 109E1748K501 With pulse sensor
Operating voltage range Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.35 90 1.6 400 1.2 300
80 1.4 350 1.0 250
0.30 70 1.2 300 55.2 V 0.8 200 55.2 V
1.0 250 48 V 0.6 150 48 V
Static pressure 0.25 60 27.6 V Static pressure 0.8 200 40.8 V Static pressure 0.4 100
24 V 0.6 150 0.2 50 40.8 V
0.20 50 20.4 V 0.4 100 2 4 6 8 10 12 (m3/min)
0.2 50 100 200 300 400 (CFM) 00
0.15 40 1 2 3 4 5 6 (m3/min) 0
30 50 100 150 200 (CFM) 00 Air ow
0.10 20 Air ow
0
0.05 10

00 246 8 10 (m3/min)
300 400 (CFM)
0 100 200
Air ow

109E1748H501 With pulse sensor 109E1748F501 With pulse sensor 109E1748M501 With pulse sensor
Operating voltage range Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa)

0.8 200 0.6 150 0.35 90
80
0.6 150 55.2 V 0.5 55.2 V 0.30 70
48 V 0.4 100
Static pressure 0.4 100 Static pressure 48 V Static pressure 0.25 60 55.2 V
40.8 V 0.3 40.8 V 48 V
0.20 50 40.8 V

0.15 40 1 2 3 4 5 6 (m3/min)
0.2 50 30 50 100 150 200 (CFM)
0.2 50 0.1 0.10 20 Air ow

0.05 10

0 0 1 2 3 4 5 6 7 8 (m3/min) 0 0 1 2 3 4 5 6 7 (m3/min) 00
0 50 100 150 200 250 300 (CFM)
Air ow 0 50 100 150 200 250 (CFM) 0
Air ow

216 CATALOG No. C1111B001 '21.2.IT

■ Dimensions (unit: mm) DC Fan ø172 mm DC

8-ø4.5±0.3

Mounting hole
+30

300 0

ø172±0.8 (10)
162±0.5
Lead wire
AWG24 7.5±0.4 7.5±0.4
UL 1007
or
AWG22
UL 1430

162±0.5 51±0.8

Rotating direction Airflow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side

162±0.3

162±0.3
4-R4.25 ø168

8.5 4-ø4.5

■ Options

Finger guards page: p. 586

Model no.: 109-1066, 109-1068, 109-319E, 109-319H, 109-320

217CATALOG No. C1111B001 '21.2.IT

DC Fan ø200 mm DC DC Fan

ø200×70 mm

San Ace 200 9GV type

■ General Specifications

· Material……………………………………… Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black Sensor Yellow Control Brown
· Mass………………………………………… 1800 g
Once the fan stops, wait for at least 15 seconds before restarting the fan.

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[m3/min] [CFM] [Pa] [inchH2O] [dB (A)]
[V] [V] cycle* [%] [A] [W] [min-1] [˚C] [h]
31.5 1112 1400 5.62 81
9GV2048P0G201 48 36 to 72 100 12.5 600 8000 -20 to +70 40000/60˚C
(70000/40˚C)

* PWM input frequency is 1 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note: Sensor and control options are available for selection. Refer to the table on p. 633.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9GV2048P0G201 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 48 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 48 VDC
PWM frequency: 1 kHz
1600 PWM duty cycle 1600 48 V 9000
6.0 100% 6.0 72 V 8000
5.5 1400 5.5 1400 36 V 7000 8000 min-1
50% 6000
5.0 1200 5.0 1200 10 20 30 40 (m3/min) 5000
4.5 20% 4.5 400 800 1,200 (CFM) 4000
10 20 30 40 (m3/min) 3000
4.0 1000Static pressure 4.0 1000 Air ow 2000
3.5 Static pressure3.5 1000
3.0 800 3.0 800
Fan speed
2.5 600 2.5 600
2.0 2.0
1.5 400 1.5 400

1.0 200 1.0 200
0.5 0.5
00 00
0 100 (%)
0 400 800 1,200 (CFM) 0 PWM duty cycle

Air ow

218 CATALOG No. C1111B001 '21.2.IT

■ Dimensions (unit: mm) 4-ø4.5±0.2 ø200±0.5 4-ø4.3±0.15

4-ø4.3±0.15 Depth 10 DC Fan ø200 mm DC

220±1 330±30
208±0.5
188.4±0.5 (10)

Lead wire ø200±0.5
AWG14
UL 1015

188.4±0.5 12±0.4 12±0.4
208±0.5 70±0.5
220±1
Air ow direction
Rotating direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side

ø208±0.3
4-ø4.5

ø208±0.3 ø194

■ Options

Finger guards page: p. 587

Model no.: 109-1102, 109-1102H, 109-1103, 109-1103H

219CATALOG No. C1111B001 '21.2.IT

DC Fan ø200 mm DC DC Fan

ø200×70 mm

San Ace 200 9EC type Model 9EC2048J001 is not certified.

■ General Specifications

· Material……………………………………… Frame: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Red Black or Blue Sensor Yellow
· Mass………………………………………… 1800 g
Once the fan stops, wait for at least 10 seconds before restarting the fan.

■ Specifications

The models listed below have pulse sensors.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[V] [V] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
9EC2024H001
9EC2048J001 24 20.4 to 26.4 2.0 48.0 3600 11.0 388 360 1.446 60 -20 to +60 40000/60˚C
9EC2048A001 40.8 to 55.2 4.4 211.2 6100 18.3 646 1000 4.016 75 (70000/40˚C)
9EC2048H001 48 43.0 to 51.0 2.2 105.6 4800 14.7 519 640 2.57 68
40.8 to 52.8 1.2 57.6 3600 11.0 388 360 1.446 60

Note: Sensor and control options are available for selection. Refer to the table on p. 626.

■ Airflow - Static Pressure Characteristics

9EC2024H001 With pulse sensor 9EC2048J001 With pulse sensor 9EC2048A001 With pulse sensor
Operating voltage range
Operating voltage range Operating voltage range

(inch H2O) (Pa) (inch H2O) (Pa) 55.2 V (inch H2O) (Pa)
48 V
2.0 500 4.5 1100 40.8 V 800
3.0 700
1.5 400 26.4 V 4.0 1000 2.5 600 51 V
24 V 48 V
300 3.5 900 2.0 500
Static pressure1.0 20.4 V 800 43 V
Static pressure3.0700
Static pressure200
2.5 600 1.5 400
0.5 100 300
2.0 500
1.0 200
1.5 400 0.5 100
300
1.0 200

0.5 100

0 0 2 4 6 8 10 12 (m3/min) 0 0 2 4 6 8 10 12 14 16 18 20 (m3/min) 0 0 2 4 6 8 10 12 14 16 (m3/min)

0 100 200 300 400 500 (CFM) 0 100 200 300 400 500 600 700 (CFM) 0 100 200 300 400 500 600 (CFM)
Air ow Air ow
Air ow

220 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics ø200 -1 0

9EC2048H001 With pulse sensor DC Fan ø200 mm DC
Operating voltage range

Static pressure(inch H2O) (Pa) 52.8 V
48 V
2.0 500
40.8 V
1.5 400

300
1.0

200

0.5 100

0 0 2 4 6 8 10 12 (m3/min)

0 100 200 300 400 500 (CFM)
Air ow

■ Dimensions (unit: mm)

8-ø4.3±0.15

Mounting hole flat head screw

8-ø4.5±0.3

Mounting hole

220±1 330±20
208±0.5
(10)
188.4 Lead wire

AWG22
UL 1007

ø2000-1188.412±0.413±0.4

4-R5 208±0.5 0
220±1 70 -1

Rotating direction Airflow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side
208
188.4

8-R2
4-ø4.5
4-ø4.5 ø194

188.4
208

■ Options

Finger guards page: p. 587

Model no.: 109-720, 109-720H, 109-721, 109-721H

221CATALOG No. C1111B001 '21.2.IT

222 CATALOG No. C1111B001 '21.2.IT

Counter Rotating Fan Counter Rotating Fan DC

Counter rotating fans feature high airflow and high static pressure.
Related product: Long Life Fan pp. 401, 403, 410

■ Model Numbering System Not every combination of the following codes or characters is available. Contact us for an available combination.

9CRA 04 12 K 4 01

Type name Frame size Voltage Speed code Frame thickness Sensor specifications

Fans with PWM control function P4 K 03

9CRA 03 12 PWM control function Frame thickness Speed code Individual customer’s spec
(2 to 3 digits)
Type name Frame size Voltage

Type name 9CRA 9CRH etc.
Frame size (mm)
03 04 06 08 12 57
Voltage (V)
38 × 38 40 × 40 60 × 60 80 × 80 120×120 ø172 × 150
Speed code
Frame thickness (mm) (sidecut)

Sensor specifications 12 48
12 48

G H J K S etc.

045689
76 48 51, 56 56 80 102

01, 001 02, 002 D01, D001
With a pulse sensor Without a sensor With a lock sensor

■ How to Read Specifications (DC fan) The following is a sample. See respective product pages for detailed information.

Model no. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[Pa] [inchH²O] [dB (A)] [˚C] [h]
9 G A 0 4 1 2 G 7 0 01 [V] [V] [A] [W] [min-1] [m³/min] [CFM]
192 0.77 42 -20 to +70 40000/60˚C
12 7 to 13.8 0.17 2.04 13100 0.36 12.7 (70000/40˚C)

Rated voltage ………………… This is the necessary voltage to drive the fan. E.g.) 12 VDC, 24 VDC, 48 VDC
Operating voltage range …… The voltage range over which fan operation is guaranteed.
Rated current ………………… The current when the fan is operating at rated voltage (at free air).
Rated input …………………… The power value when the fan is operating at rated voltage (at free air).
Rated speed …………………… The speed when the fan is operating at rated voltage (at free air).
Max. airflow …………………… The maximum airflow that the fan can generate during rated operation (measured with our double chamber measuring device).

Airflow is the volume of air generated by the fan per unit of time.
Max. static pressure ………… The maximum static pressure value that the fan can produce during rated operation (measured with our double chamber measuring device).

Static pressure indicates a fan's ability to move air against resistance due to the internal structure of the device to which the fan is installed.
SPL ……………………………… SPL stands for Sound Pressure Level. The noise level during the fan's rated operation.

Please refer to the technical material section for the measurement method.
Operating temperature ……… The temperature range over which fan operation is guaranteed (Non- condensing).
Expected life…………………… Service life hours that 90% of bearings will survive without failing when continuously operated at the rated voltage and 60˚C

temperature. Expected life at 40˚C is for reference only.
For more information, please refer to the technical material section.

223CATALOG No. C1111B001 '21.2.IT

Counter Rotating Fan 38 mm sq. DC Counter Rotating Fan

38×38×48 mm

San Ace 38 9CRA type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Inlet Red Black Sensor Yellow Control Brown

Outlet Orange Gray Sensor Purple Control White
· Mass………………………………………… 80 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
[V] [V] cycle* [%] [A] [W] [min-1]

Inlet Outlet

9CRA0312P4K03 100 1.5 18.0 17600 14520 0.77 27.2 700.0 2.81 64
9CRA0312P4J03 0.2 2.4 5280 4200 0.22 7.8 54.9 0.22 33
12 10.8 to 13.2 0 1.1 13.2 16000 13200 0.7 24.7 560.0 2.25 62 -20 to +70 40000/60˚C
100 0.18 2.2 4800 3960 0.21 7.4 50.4 0.2 31 (70000/40˚C)

0

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note: Sensor and control options are available for selection. Refer to the table on p. 625.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CRA0312P4K03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
800 PWM duty cycle 800 13.2 V 20000
3.0 700 100% 3.0 700
2.5 600 2.5 600 12 V Inlet 17600 min-1
10.8 V 14520 min-1
2.0 500 15000
2.0 500Static pressure50% 5280 min-1 Outlet
Static pressure0%1.5 400
1.5 400 300 10000
300 Fan speed
1.0 5000 4200 min-1
1.0 200
200
0.5 100
0.5 100

0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 (m3/min) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 (m3/min) 0 100 (%)
PWM duty cycle
0 5 10 15 20 25 30 (CFM) 0 5 10 15 20 25 30 (CFM)
Air ow Air ow

224 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CRA0312P4J03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example
Fan speed
(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
Counter Rotating Fan 38 mm sq. DCPWM frequency: 25 kHz
700 PWM duty cycle 700 13.2 V 20000
2.5 600 100% 2.5 600 12 V
10.8 V 15000 Inlet 16000 min-1
2.0 500 2.0 500 13200 min-1
Static pressure Static pressure
1.5 400 50% 1.5 400 4800 min-1 Outlet
300 0% 300 10000

1.0 1.0 5000
200 200 3960 min-1

0.5 100 0.5 100

0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 (m3/min) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 (m3/min) 0 100 (%)
0 5 10 15 20 25 (CFM) 0 5 10 15 20 25 (CFM) PWM duty cycle
Air ow Air ow

■ Dimensions (unit: mm) +30 48±0.5 Outlet side
320 0
Inlet side 38±0.5
(10) (5) (5) 30±0.3 4-ø3.5±0.3
4-ø3.5±0.3
Mounting hole
Mounting hole

(10)

+30 30±0.3
320 0 38±0.5

Lead wire
AWG28
UL 1007

Rotating direction Air ow direction Rotating direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side
37

30±0.3 4-ø3.7

(16)

37.5
(16)

30±0.3

37

■ Options page: p. 584

Finger guards
Model no.: 109-1065

225CATALOG No. C1111B001 '21.2.IT

Counter Rotating Fan 40 mm sq. DC Counter Rotating Fan

40×40×48 mm

San Ace 40 9CRA type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Inlet Red Black Sensor Yellow Control Brown

Outlet Orange Gray Sensor Purple Control White
· Mass………………………………………… 80 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
[V] [V] cycle* [%] [A] [W] [min-1]

Inlet Outlet

9CRA0412P4K03 100 1.6 19.2 17500 11700 0.92 32.5 650.0 2.61 64
9CRA0412P4J03 0.19 2.28 5250 3510 0.276 9.75 58.5 0.235 33
9CRA0412P4G03 0 1.2 14.4 16200 10800 0.85 30.0 560.0 2.25 62
0.15 1.8 4500 3000 0.236 8.33 43.2 0.173 28
12 10.8 to 13.2 100 1.0 12.0 14700 9800 0.77 27.2 460.0 1.85 59 -20 to +70 40000/60˚C
0 0.15 1.8 4410 2940 0.231 8.16 41.4 0.166 28 (70000/40˚C)

100

0

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note: Sensor and control options are available for selection. Refer to the table on p. 625.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CRA0412P4K03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
800 PWM duty cycle 800 13.2 V 20000
3.0 100% 3.0 12 V
10.8 V Inlet 17500 min-1
700 700 11700 min-1
2.5 600 2.5 600 15000
5250 min-1
2.0 500
2.0 500Static pressure
Static pressure
1.5 400 50% 1.5 400 10000
Fan speed0%
1.0 300 1.0 300 Outlet
200 200
5000
0.5 100 0.5 100 3510 min-1

0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min) 0 100 (%)
0 5 10 15 20 25 30 35 (CFM) PWM duty cycle
Air ow 0 5 10 15 20 25 30 35 (CFM)
Air ow

226 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CRA0412P4J03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example Counter Rotating Fan 40 mm sq. DC

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
800 PWM duty cycle 800 13.2 V 20000
3.0 100% 3.0 12 V
10.8 V Inlet 16200 min-1
700 700 10800 min-1
Static pressure 2.5 600 Static pressure 2.5 600 15000

2.0 500 2.0 500 Fan speed 4500 min-1
10000
1.5 400 1.5 400
50% 1.0 300 Outlet
300 0%
1.0 200 5000
0.5 100 3000 min-1
200
0.5 100

0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min) 0 100 (%)
0 5 10 15 20 25 30 35 (CFM) PWM duty cycle
Air ow 0 5 10 15 20 25 30 35 (CFM)
Air ow

9CRA0412P4G03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
800 PWM duty cycle 800 13.2 V 20000
3.0 100% 3.0
50% 15000 Inlet 14700 min-1
700 0% 700
2.5 600 2.5 600 9800 min-1
Static pressure Static pressure
2.0 500 2.0 500 12 V Fan speed 4410 min-1 Outlet
10.8 V 10000
1.5 400 1.5 400
1.0 300 1.0 300 5000
2940 min-1
200 200
0.5 100 0.5 100

0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min) 0 100 (%)
PWM duty cycle
0 5 10 15 20 25 30 35 (CFM) 0 5 10 15 20 25 30 35 (CFM)
Air ow Air ow

■ Dimensions (unit: mm) +30 48±0.5 Outlet side 4-ø3.5±0.3
320 0
Inlet side (10) (5) (5) 40±0.5 Mounting hole
+30 Lead wire 32±0.3
4-ø3.5±0.3 320 0 AWG28
UL 1007
Mounting hole (10)

32±0.3
40±0.5

Rotating direction Airflow direction Rotating direction

227CATALOG No. C1111B001 '21.2.IT

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side

39

32±0.3

(17.6)
Counter Rotating Fan 40 mm sq. DC 4-ø3.7
40
(17.6)
32±0.3
39

■ Options page: p. 584

Finger guards
Model no.: 109-059, 109-059H

228 CATALOG No. C1111B001 '21.2.IT

Counter Rotating Fan Counter Rotating Fan 40 mm sq. DC

40×40×56 mm

San Ace 40 9CRJ type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Inlet Red Black Sensor Yellow Control Brown

Outlet Orange Gray Sensor Purple Control White
· Mass………………………………………… 110 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
[V] [V] cycle* [%] [A] [W] [min-1]

Inlet Outlet

9CRJ0412P5J001 12 10.8 to 12.6 100 3.1 37.2 36200 32000 1.06 37.4 2400 9.64 72 -20 to +70 30000/60˚C
20 0.1 1.2 4500 4000 0.11 3.9 40 0.16 28 (53000/40˚C)

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CRJ0412P5J001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
10 2500 PWM duty cycle 10 2500 12 V/12.6 V 40000
100% 8 2000 36200 min-1
8 2000 6 1500 10.8 V 35000 32000 min-1

Static pressure 30000
Static pressure
6 1500 25000 Inlet
Speed
20000

4 1000 4 1000 15000 Outlet
2 500
60% 2 500 10000

20% 5000

0 0 0.2 0.4 0.6 0.8 1.0 1.2 (m3/min) 0 0 0.2 0.4 0.6 0.8 1.0 1.2 (m3/min) 0 100 (%)
0 10 20 30 40 (CFM) 0 10 20 30 40 (CFM) PWM duty cycle
Air ow Air ow

229CATALOG No. C1111B001 '21.2.IT

Counter Rotating Fan 40 mm sq. DC ■ Dimensions (unit: mm) +30 56±0.5 Outlet side
320 0
Inlet side (5) 40±0.3
(10) (5) 32±0.3
4-ø3.5±0.3 (10)
Mounting hole

+30 32±0.3
320 0 40±0.3

Lead wire Air ow direction 4-ø3.5±0.3
AWG 26 Mounting hole
UL 10368
Rotating direction
Rotating direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø3.7

39
32±0.3
(17.6)

40
(17.6)
32±0.3

39

■ Options page: p. 584

Finger guards
Model no.: 109-059, 109-059H

230 CATALOG No. C1111B001 '21.2.IT

Counter Rotating Fan Counter Rotating Fan 40 mm sq. DC

40×40×56 mm

San Ace 40 9CRH type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Inlet Red Black Sensor Yellow Control Brown

Outlet Orange Gray Sensor Purple Control White
· Mass………………………………………… 110 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
[V] [V] cycle* [%] [A] [W] [min-1]

Inlet Outlet

9CRH0412P5J001 12 10.8 to 12.6 100 2.52 30.24 29500 25500 0.93 32.9 1700 6.83 70 -20 to +70 30000/60˚C
20 0.06 0.72 3000 2600 0.08 2.8 17 0.07 20 (53000/40˚C)

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note:The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CRH0412P5J001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC 29500 min-1
PWM frequency: 25 kHz 25500 min-1
8.0 2000 PWM duty cycle 8.0 2000 12 V/12.6 V 30000
100%
7.0 1800 7.0 1800 10.8 V 25000
1600 1600 20000
6.0 1400 6.0 1400
Static pressure Inlet
Static pressure
5.0 1200 5.0 1200
Fan speed
4.0 1000 4.0 1000 15000

3.0 800 60% 3.0 800 10000 Outlet
600 600
2.0 400 2.0 400

1.0 200 20% 1.0 200 5000

0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min) 0 100 (%)
PWM duty cycle
0 5 10 15 20 25 30 35 (CFM) 0 5 10 15 20 25 30 35 (CFM)

Air ow Air ow

231CATALOG No. C1111B001 '21.2.IT

Counter Rotating Fan 40 mm sq. DC ■ Dimensions (unit: mm) +30 56±0.5 Outlet side
320 0
Inlet side 40±0.3
(10) (5) (5) 32±0.3
4-ø3.5±0.3

Mounting hole

(10)

+30 32±0.3
320 0 40±0.3
Lead wire
AWG 24 Air ow direction 4-ø3.5±0.3
UL 1061
Mounting hole
Rotating direction Rotating direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø3.7

39

32±0.3

(17.6)

40
(17.6)

32±0.3

39

■ Options page: p. 584

Finger guards
Model no.: 109-059, 109-059H

232 CATALOG No. C1111B001 '21.2.IT

Counter Rotating Fan Counter Rotating Fan 40 mm sq. DC

40×40×56 mm

San Ace 40 9CRV type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Inlet Red Black Sensor Yellow Control Brown

Outlet Orange Gray Sensor Purple Control White
· Mass………………………………………… 100 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
[V] [V] cycle* [%] [A] [W] [min-1]

Inlet Outlet

9CRV0412P5J201 12 10.8 to 13.2 100 1.8 21.6 22500 20000 0.9 31.8 1050 4.22 68 -20 to +70 40000/60˚C
0 0.11 1.32 3800 3500 0.14 4.9 30 0.12 26 (70000/40˚C)

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note:The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CRV0412P5J201 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
4.5 1100 PWM duty cycle 4.5 1100 12 V/13.2 V 25000
100% 10.8 V
4.0 1000 4.0 1000 22500 min-1
22000 min-1
3.5 900 3.5 900 20000 Inlet
Static pressure800 800
3.0 Static pressure7003.0700 15000
3800 min-1
2.5 600 Fan speed2.5 600
10000
2.0 500 50% 2.0 500 Outlet
0%
1.5 400 1.5 400
300 300
1.0 200 1.0 200 5000
3500 min-1
0.5 100 0.5 100
0 100 (%)
0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min) PWM duty cycle

0 5 10 15 20 25 30 35 (CFM) 0 5 10 15 20 25 30 35 (CFM)

Air ow Air ow

233CATALOG No. C1111B001 '21.2.IT

Counter Rotating Fan 40 mm sq. DC ■ Dimensions (unit: mm) 320+300 56±0.5 Outlet side

Inlet side (10) (5) (5) 40±0.3
32±0.3
4-ø3.5±0.3

Mounting hole

(10)

+30 32±0.3
320 0 40±0.3

Lead wire Air ow direction 4-ø3.5±0.3
AWG 28
UL 1061 Mounting hole

Rotating direction Rotating direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø3.7

39

32±0.3

(17.6)

40
(17.6)

32±0.3

39

■ Options page: p. 584

Finger guards
Model no.: 109-059, 109-059H

234 CATALOG No. C1111B001 '21.2.IT

Counter Rotating Fan Counter Rotating Fan 40 mm sq. DC

40×40×56 mm

San Ace 40 9CRD type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Inlet Red Black Sensor Yellow Control Brown

Outlet Orange Gray Sensor Purple Control White
· Mass………………………………………… 90 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
[V] [V] cycle* [%] [A] [W] [min-1]

Inlet Outlet

9CRD0412P5J03 100 1.15 13.8 19000 12600 0.87 30.72 630 2.53 61
9CRD0412P5G03 0.12 1.44 3700 2500 0.15 5.3 25 0.1 22
9CRD0412P5H03 0 0.9 10.8 16700 11250 0.77 27.19 500 2.01 58
9CRD0412P5M03 0.1 1.2 3350 2250 0.13 4.59 21 0.08 21
100 0.6 7.2 15000 10000 0.7 24.72 410 1.65 56
0.09 1.08 3000 2000 0.12 4.24 16 0.06 20
12 10.8 to 13.2 0 0.52 6.24 14000 9300 0.65 22.95 360 1.45 54 -20 to +70 40000/60˚C
100 0.07 0.84 2000 1300 0.07 2.47 7 0.03 15 (70000/40˚C)

0

100

0

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CRD0412P5J03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC 19000 min-1
PWM frequency: 25 kHz
700 PWM duty cycle 800 13.2 V 20000
2.5 600 100% 3.0 700 12 V
2.5 600 Inlet
2.0 500
2.0 500 15000
1.5 400Static pressure 3700 min-1 12600 min-1
Static pressure
300 1.5 400 10000
1.0 Fan speed
50% 1.0 300 10.8 V Outlet
200 0% 200
0.5 100 5000
0.5 100 2500 min-1

0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min) 0 100 (%)
PWM duty cycle
0 5 10 15 20 25 30 35 (CFM) 0 5 10 15 20 25 30 35 (CFM)
Air ow Air ow

235CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CRD0412P5G03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example
Counter Rotating Fan 40 mm sq. DC
Static pressure (inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
700 PWM duty cycle 800 13.2 V 20000
2.5 600 100% 3.0
Inlet 16700 min-1
2.0 500 700
2.5 600 15000
Static pressure
1.5 400 50% 2.0 500 12 V Fan speed 3350 min-1 11250 min-1
0% 10.8 V 10000
300 1.5 400 Outlet
1.0 1.0 300 5000

200 200 2250 min-1
0.5 100 0.5 100

0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min) 0 100 (%)
PWM duty cycle
0 5 10 15 20 25 30 35 (CFM) 0 5 10 15 20 25 30 35 (CFM)
Air ow Air ow

9CRD0412P5H03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) (inch H2O) (Pa) (min-1) Voltage: 12 VDC

700 12 VDC 3.0 800 PWM duty cycle 100% 20000 PWM frequency: 25 kHz
2.5 600 700
PWM duty cycle 13.2 V 15000 15000 min-1
2.0 500 100% 2.5 600
Static pressure Static pressure Inlet

1.5 400 2.0 500 12 V Fan speed 10000 3000 min-1 10000 min-1
10.8 V
300 50% 1.5 400 Outlet
1.0 1.0 300
5000
200 200
0.5 100
0.5 100 0% 2000 min-1
0 100 (%)
0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min)
0 5 10 15 20 25 30 35 (CFM) PWM duty cycle
Air ow 0 5 10 15 20 25 30 35 (CFM)
Air ow

9CRD0412P5M03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
700 PWM duty cycle 3.0 800 13.2 V 20000
2.5 600 100% 700
15000
2.0 500 2.5 600
Static pressure Static pressure Fan speed Inlet 14000 min-1
2.0 500
1.5 400
1.5 400 10000 9300 min-1
300 50% 1.0 300 12 V 2000 min-1
1.0 10.8 V Outlet
200 5000
200 0.5 100

0.5 100 0% 0 1300 min-1
0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min) 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min) 0 100 (%)

0 5 10 15 20 25 30 35 (CFM) 0 5 10 15 20 25 30 35 (CFM) PWM duty cycle
Air ow Air ow

236 CATALOG No. C1111B001 '21.2.IT

■ Dimensions (unit: mm) +30 Outlet side
320 0
Inlet side 40±0.3
32±0.3
4-ø3.5±0.3

Mounting hole
40 56±0.5 4-ø3.5±0.3
(17.6)
(10) (5) (5) Mounting hole
32±0.3 (10)

39+30Lead wire
320 0 AWG28
32±0.3UL 1007
40±0.3
Rotating direction Air ow direction Rotating direction
Counter Rotating Fan 40 mm sq. DC
■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø3.7

39

32±0.3

(17.6)

■ Options page: p. 584

Finger guards
Model no.: 109-059, 109-059H

237CATALOG No. C1111B001 '21.2.IT

Counter Rotating Fan 40 mm sq. DC Counter Rotating Fan

40×40×56 mm

San Ace 40 9CRE type

■ General Specifications

· Material……………………………………… Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Inlet Red Black Sensor Yellow Control Brown

Outlet Orange Gray Sensor Purple Control White
· Mass………………………………………… 110 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
[V] [V] cycle* [%] [A] [W] [min-1]

Inlet Outlet

9CRE0412P5J03 12 10.8 to 13.2 100 1.4 16.8 15800 12200 0.9 31.8 570.0 2.29 62 -20 to +70 40000/60˚C
0 0.1 1.2 2850 2250 0.12 4.2 13.7 0.055 20.5 (70000/40˚C)

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note: Sensor and control options are available for selection. Refer to the table on p. 626.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CRE0412P5J03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
2.8 700 PWM duty cycle 2.8 700 13.2 V 20000
100% 12 V
2.4 600 2.4 600 10.8 V Inlet 15800 min-1
12200 min-1
2.0 500 15000
Outlet
1.6 400
2.0 500Static pressure
Static pressure
1.6 400 50% 1.2 300 10000 2850 min-1
1.2 300 Fan speed

0.8 200 0.8 200 5000
0.4 100 2250 min-1
0% 0.4 100
0 100 (%)
00 00 PWM duty cycle
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3/min)

0 5 10 15 20 25 30 35 (CFM) 0 5 10 15 20 25 30 35 (CFM)
Air ow Air ow

238 CATALOG No. C1111B001 '21.2.IT

■ Dimensions (unit: mm) Outlet side

Inlet side +30 4-ø3.5±0.3
320 0
4-ø3.5±0.3 Mounting hole

Mounting hole
40 56±0.5 40±0.3
(17.6) 32±0.3
(10) 5±0.3 5±0.3
32±0.3
(10)
39
+30
32±0.3320 0
40±0.3Lead wire
AWG28
Counter Rotating Fan 40 mm sq. DCUL 1061

Rotating direction Air ow direction Rotating direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø3.7

39

32±0.3

(17.6)

■ Options page: p. 584

Finger guards
Model no.: 109-059, 109-059H

239CATALOG No. C1111B001 '21.2.IT

Counter Rotating Fan 60 mm sq. DC Counter Rotating Fan

60×60×51 mm

San Ace 60 9CR type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Inlet Red Black Sensor Yellow Control Brown

Outlet Orange Gray Sensor Purple Control White
· Mass………………………………………… 180 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
[V] [V] cycle* [%] [A] [W] [min-1]

Inlet Outlet

9CR0612P5G03 100 2.7 32.4 11500 9000 2.03 71.7 600 2.41 68
9CR0612P5H03 0.22 2.64 3000 2300 0.48 16.9 40 0.16 34
12 10.8 to 13.2 0 2.0 24.0 10500 8200 1.85 65.4 500 2.01 65 -20 to +70 40000/60˚C
100 0.22 2.64 3000 2300 0.48 16.9 40 0.16 34 (70000/40˚C)

0

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note: Sensor and control options are available for selection. Refer to the table on p. 625.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CR0612P5G03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
700 PWM duty cycle 700 13.2 V 15000
2.5 600 100% 2.5 600 12 V
Inlet 11500 min-1
2.0 500 2.0 500 10.8 V 9000 min-1
Static pressure 10000
Static pressure1.5 400 Outlet
1.5 400 50% 300 3000 min-1
300 Fan speed0%
1.0 5000
1.0 200
200 2300 min-1
0.5 100 0 100 (%)
0.5 100
PWM duty cycle
0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 0 0.5 1.0 1.5 2.0 2.5 (m3/min)
0 10 20 30 40 50 60 70 80 90 (CFM) 0 10 20 30 40 50 60 70 80 90 (CFM)
Air ow Air ow

240 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CR0612P5H03 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example
Fan speed
(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
Counter Rotating Fan 60 mm sq. DCPWM frequency: 25 kHz
2.5 600 2.5 600 13.2 V 15000
12 V
Static pressure 2.0 500 PWM duty cycle Static pressure 2.0 500 10.8 V 10000 Inlet 10500 min-1
100% 8200 min-1
1.5 400 50% 1.5 400 3000 min-1
300 0% 300 Outlet
5000
1.0 1.0
200 200 2300 min-1

0.5 100 0.5 100

00 0.5 1.0 1.5 2.0 (m3/min) 00 0.5 1.0 1.5 2.0 (m3/min) 0 100 (%)
PWM duty cycle
0 10 20 30 40 50 60 70 (CFM) 0 10 20 30 40 50 60 70 (CFM)
Air ow Air ow

■ Dimensions (unit: mm) +50 51±0.5 Outlet side 4-ø4.3±0.3
300 0
Inlet side (10) (4) (4) 60±0.5 Mounting hole
50±0.3
4-ø4.3±0.3

Mounting hole

(10) 50±0.3
+50 60±0.5

300 0
Lead wire
AWG26
UL 1430

Rotating direction Air ow direction Rotating direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø4.5
59

50±0.3

29.7

62.7
29.7

50±0.3

59

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1003G
Finger guards
Model no.: 109-139E, 109-139H

Resin filter kits page: p. 592

Model no.: 109-1003F13 (13PPI), 109-1003F20 (20PPI),
109-1003F30 (30PPI), 109-1003F40 (40PPI)

241CATALOG No. C1111B001 '21.2.IT

Counter Rotating Fan 60 mm sq. DC Counter Rotating Fan

60×60×56 mm

San Ace 60 9CRA type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Inlet Red Black Sensor Yellow Control Brown

Outlet Orange Gray Sensor Purple Control White
· Mass………………………………………… 200 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
[V] [V] cycle* [%] [A] [W] [min-1]
30000/60˚C
Inlet Outlet (53000/40˚C)

9CRA0612P6K001 100 3.1 37.2 18300 15800 2.28 80.5 1130 4.54 73 -20 to +70 40000/60˚C
9CRA0612P6J001 0.17 2.0 3800 3300 0.47 16.6 49 0.2 35 (70000/40˚C)
9CRA0612P6G001 0 2.3 27.6 16800 14500 2.1 74.2 950 3.82 70
0.15 1.8 3800 3300 0.47 16.6 49 0.2 35
12 10.8 to 13.2 100 1.3 15.6 13500 11400 1.65 58.3 620 2.49 65
0 0.1 1.2 3000 2500 0.36 12.7 31 0.12 29

100

0

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note:The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CRA0612P6K001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
5.5 1400 PWM duty cycle 5.5 1400 13.2 V 20000
100% 12 V 18300 min-1
5.0 1200 5.0 1200 18000 Inlet 15800 min-1
4.5 4.5 10.8 V 16000
Static pressure
4.0 1000 Static pressure4.0 1000 14000 3800 min-1
12000
3.5 Fan speed8003.5800
3.0 50% 3.0 10000
Outlet
2.5 600 2.5 600
2.0 2.0 8000
1.5 400 1.5 400
6000

1.0 200 0% 1.0 200 4000 3300 min-1
0.5 0.5 2000

0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 100 (%)
PWM duty cycle
0 10 20 30 40 50 60 70 80 (CFM) 0 10 20 30 40 50 60 70 80 (CFM)

Air ow Air ow

242 CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CRA0612P6J001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example Counter Rotating Fan 60 mm sq. DC

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
1200 PWM duty cycle 1200 13.2 V 18000
4.5 100% 4.5 12 V 16800 min-1
4.0 1000 10.8 V 16000 14500 min-1
4.0 1000 14000 Inlet

Static pressure 3.5 800 Static pressure 3.5 800 Fan speed 12000 3800 min-1
3.0 3.0 10000

2.5 600 50% 2.5 600 8000 Outlet
2.0 2.0
1.5 400 1.5 400 6000

1.0 200 0% 1.0 200 4000
0.5 0.5 2000 3300 min-1

0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 100 (%)
PWM duty cycle
0 10 20 30 40 50 60 70 80 (CFM) 0 10 20 30 40 50 60 70 80 (CFM)
Air ow Air ow

9CRA0612P6G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
1200 1200 18000
4.5 4.5
16000
4.0 1000 4.0 1000
14000 13500 min-1
Static pressure 3.5 Static pressure 3.5 12000 Inlet 11400 min-1
3.0 3.0
800 PWM duty cycle 800 13.2 V Fan speed
100% 12 V
2.5 600 50% 2.5 600 10000
2.0 10.8 V 8000 3000 min-1
1.5 400 2.0 6000
1.5 400 Outlet

1.0 200 1.0 200 4000
0.5 0.5
0% 2000 2500 min-1

0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 100 (%)
PWM duty cycle
0 10 20 30 40 50 60 70 80 (CFM) 0 10 20 30 40 50 60 70 80 (CFM)
Air ow Air ow

■ Dimensions (unit: mm) Outlet side

Inlet side +50
300 0
4-ø4.5±0.3 (10)

Mounting hole

60±0.5 Lead wire
50±0.3
AWG26
UL 1430

50±0.3 (4) (4)
60±0.5
56±0.5 4-ø4.5±0.3
Rotating direction
Air ow direction Mounting hole

Rotating direction

243CATALOG No. C1111B001 '21.2.IT

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side

59
50±0.3

29.7
Counter Rotating Fan 60 mm sq. DC4-ø4.5
6622..77
29.7
50±0.3
59

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1003G
Finger guards
Model no.: 109-139E, 109-139H

Resin filter kits page: p. 592

Model no.: 109-1003F13 (13PPI), 109-1003F20 (20PPI),
109-1003F30 (30PPI), 109-1003F40 (40PPI)

244 CATALOG No. C1111B001 '21.2.IT

Counter Rotating Fan Counter Rotating Fan 60 mm sq. DC

60×60×76 mm

San Ace 60 9CRE type

■ General Specifications

· Material……………………………………… Frame: Aluminum, Impeller: Plastic (Flammability: UL 94V-1)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Inlet Red Black Sensor Yellow Control Brown

Outlet Orange Gray Sensor Purple Control White
· Mass………………………………………… 300 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
[V] [V] cycle* [%] [A] [W] [min-1]
1000 4.0 66
Inlet Outlet 47.6 0.19 32

9CRE0612P0G001 12 10.8 to 13.2 100 2.3 27.6 16500 13000 2.0 70.6 -20 to +70 40000/60˚C
0 0.22 2.7 3600 2800 0.43 15.1 (70000/40˚C)

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CRE0612P0G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
5.0 1200 PWM duty cycle 5.0 1200 13.2 V 18000
4.0 1000 100% 12 V 16000 16500 min-1
4.0 1000
10.8 V 14000 Inlet 13000 min-1
Static pressure 3.0 800 12000
3.0 800 Static pressure600
10000 3600 min-1
600 Fan speed50%2.08000 Outlet
2.0 400
6000
400 1.0 200

1.0 200 0% 4000
2000 2800 min-1

0 0 0 100 (%)
0 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 0.5 1.0 1.5 2.0 2.5 (m3/min) PWM duty cycle

0 10 20 30 40 50 60 70 80 (CFM) 0 10 20 30 40 50 60 70 80 (CFM)
Air ow Air ow

245CATALOG No. C1111B001 '21.2.IT

■ Dimensions (unit: mm) Inlet side

Outlet side 4-ø4.3±0.3

60±0.5 Mounting hole
50±0.3 Rotating direction
Counter Rotating Fan 60 mm sq. DC
+50
60±0.5 300 0
50±0.3
(10)

4-ø4.3±0.3 (10) 4±0.3 4±0.3
+50
Mounting hole 76±0.5
300 0
Rotating direction Air ow direction
Lead wire
AWG26
UL 1430

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø4.5
59

50±0.3

29.7

62.7
29.7

50±0.3

59

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1003G
Finger guards
Model no.: 109-139E, 109-139H

Resin filter kits page: p. 592

Model no.: 109-1003F13 (13PPI), 109-1003F20 (20PPI),
109-1003F30 (30PPI), 109-1003F40 (40PPI)

246 CATALOG No. C1111B001 '21.2.IT

Counter Rotating Fan Counter Rotating Fan 60 mm sq. DC

60×60×76 mm

San Ace 60 9CRA type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Inlet Red Black Sensor Yellow Control Brown

Outlet Orange Gray Sensor Purple Control White
· Mass………………………………………… 270 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
[V] [V] cycle* [%] [A] [W] [min-1]
66
Inlet Outlet 32
63
9CRA0612P0G001 100 2.3 27.6 16500 13000 2.0 70.6 1000 4.0 29
9CRA0612P0S001 0.22 2.7 3600 2800 0.43 15.1 47.6 0.19
12 10.8 to 13.2 0 1.5 18.0 14000 11000 1.7 60.0 720 2.89 -20 to +70 40000/60˚C
100 0.17 2.1 3200 2500 0.38 13.4 37.6 0.15 (70000/40˚C)

0

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note:The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CRA0612P0G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inc5h.0H2O)12(P0a0) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
4.0 1000 PWM frequency: 25 kHz
PWM duty cycle 5.0 1200 13.2 V 18000
100% 12 V 16500 min-1
4.0 1000 16000 13000 min-1
10.8 V
3.0 800Static pressure 3.0 800 14000 Inlet
Static pressure600 12000

600 Fan speed50%2.010000 3600 min-1Outlet
2.0 400 8000
6000
400 1.0 200

1.0 200 0% 4000
2000 2800 min-1

0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 100 (%)
PWM duty cycle
0 10 20 30 40 50 60 70 80 (CFM) 0 10 20 30 40 50 60 70 80 (CFM)
Air ow Air ow

247CATALOG No. C1111B001 '21.2.IT

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CRA0612P0S001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example
Counter Rotating Fan 60 mm sq. DC
Static pressure (inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
5.0 1200 5.0 1200 18000

4.0 1000 4.0 1000 16000

PWM duty cycle Static pressure 3.0 800 13.2 V 14000 14000 min-1
100% 600 12 V 11000 min-1
3.0 800 10.8 V Fan speed 12000 Inlet
2.0
600 400 10000
2.0
50% 1.0 200 8000 3200 min-1 Outlet
400 6000

1.0 200 0% 4000
2000 2500 min-1

0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 0 0.5 1.0 1.5 2.0 2.5 (m3/min) 0 100 (%)
0 10 20 30 40 50 60 70 80 (CFM) PWM duty cycle
0 10 20 30 40 50 60 70 80 (CFM) Air ow
Air ow

■ Dimensions (unit: mm) +50 (4) 76±0.5 Outlet side
300 0
Inlet side 60±0.5
(10) (4) 50±0.3
4-ø4.5±0.3

Mounting hole

(10) 50±0.3
60±0.5
+50
300 0 4-ø4.5±0.3

Lead wire Mounting hole
AWG26
UL 1430 Rotating direction

Rotating direction Air ow direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø4.5
59

50±0.3

29.7

62.7
29.7

50±0.3

59

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1003G
Finger guards
Model no.: 109-139E, 109-139H

Resin filter kits page: p. 592

Model no.: 109-1003F13 (13PPI), 109-1003F20 (20PPI),
109-1003F30 (30PPI), 109-1003F40 (40PPI)

248 CATALOG No. C1111B001 '21.2.IT

Counter Rotating Fan Counter Rotating Fan 80 mm sq. DC

80×80×80 mm

San Ace 80 9CRB type

■ General Specifications

· Material……………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)

Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection, Reverse polarity protection

For details, please refer to p. 599.
· Dielectric strength………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
· Insulation resistance……………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
· Sound pressure level (SPL)……………… At 1 m away from the air inlet
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… Inlet Red Black Sensor Yellow Control Brown

Outlet Orange Gray Sensor Purple Control White
· Mass………………………………………… 430 g

■ Specifications

The models listed below have pulse sensors with PWM control function.

Model no. Rated voltage Operating voltage range PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
[m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
[V] [V] cycle* [%] [A] [W] [min-1]
1150 4.6 80
Inlet Outlet 21.6 0.09 24

9CRB0812P8G001 12 10.8 to 13.2 100 9.2 110.4 14600 12200 5.5 194 -20 to +70 40000/60˚C
20 0.17 2.04 2000 1670 0.7 24.7 (70000/40˚C)

* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.

Note:The mark indicates Short LeadTime Service applicable models. See p. 654 for details.

■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example

9CRB0812P8G001 With pulse sensor with PWM control function

PWM duty cycle Operating voltage range PWM duty - Speed characteristics example

(inch H2O) (Pa) 12 VDC (inch H2O) (Pa) PWM duty cycle 100% (min-1) Voltage: 12 VDC
PWM frequency: 25 kHz
1400 PWM duty cycle 1400 13.2 V 16000
100% 5 1200 12 V 14600 min-1
5 1200 14000 12200 min-1
4 1000 10.8 V
4 1000Static pressure 12000 Inlet
Static pressure3 800 10000
3 800 600
Fan speed 8000
600 2
2 60% 400 6000 Outlet

400 1 200 4000

1 200 20% 2000

0 0 1 2 3 4 5 6 (m3/min) 0 0 1 2 3 4 5 6 (m3/min) 0 100 (%)
PWM duty cycle
0 20 40 60 80 100 120 140 160 180 200 (CFM) 0 20 40 60 80 100 120 140 160 180 200 (CFM)
Air ow Air ow

249CATALOG No. C1111B001 '21.2.IT

Counter Rotating Fan 80 mm sq. DC ■ Dimensions (unit: mm) Lead wire 80±1 Outlet side
AWG22
Inlet side UL 1430 (4) (4) 80±0.5
71.5±0.5
4-ø4.5±0.5

Mounting hole

(10) 71.5±0.5
+30 80±0.5

300 0

Rotating direction Air ow direction 4-ø4.5±0.5

Mounting hole
Rotating direction

■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)

Inlet side, Outlet side 4-ø4.5
78.5

71.5±0.3

78.5

71.5±0.3
ø90

■ Options page: p. 584 Resin finger guards page: p. 591
Model no.: 109-1002G
Finger guards
Model no.: 109-049E, 109-049H

Resin filter kits page: p. 592

Model no.: 109-1002F13 (13PPI), 109-1002F20 (20PPI),
109-1002F30 (30PPI), 109-1002F40 (40PPI)

250 CATALOG No. C1111B001 '21.2.IT