Autop Stenhoj Catalogue

51

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 3,500 kg Platforms approx. 5,300 mm
Lifting capacity 1,905 mm Total length 4,200 mm
Lifting height Usable legth of platform
F: 2,055 mm Wheel base approx. 3,700 mm
Working height RFH Saav: 2,135 mm Platform width 605 mm
Distance between platforms 910 mm
Cylinder diameter RFH Pv: 2,120 mm Drive-on height 150 mm
Distance between cylinders + Rubber pads
Lifting / lowering time Arm superstructure 3,210 mm
(high pressure) 4 x 123 mm Total width Uni: 11027 (95 – 135 mm)
Foundation depth 1,335 / 1,705 mm Lifting pad included Sport: 29265 (70 – 95 mm
Pump unit in the delivery
Hydraulic oil approx. 35 sec. Uni: 95 – 135 mm
Voltage Min. height Sport: 70 – 95 mm
2,875 mm
3 kW Arm length, min. - max. 710 – 1,445 mm
14 l min. – max.

230 / 400 V – 50 Hz – 16 A

Pv superstructure 120 – 180: approx. 1,200 – 1,800 mm Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
Total length min. – max. 140 – 200: approx. 1,400 – 2,000 mm
Min. height 160 – 220: approx. 1,600 – 2,200 mm
170 – 240: approx. 1,700 – 2,400 mm

65 mm

Slidable superstructure

52 INGROUND LIF TS

Profilift 2.40 F460 / Fn460

Electro-hydraulic twin-ram lift, 4 t, with platforms

Application Description: Versions:

Check-in Steel cassette: Steel cassette:
Repairs and maintenance Waterproof steel cassette Zinc-coated
Wheel alignment Coated
Test Hydraulic unit: Self-carrying
Hard-chrome plated cylinder
Approvals / recommendations Flexible synchronization and safety system Installation:
Corrosion-free guiding elements Superstructure on floor
Renault Pump unit with immersed motor Superstructure in floor with
PL 2.40 F 460: Hydraulic oil
Jaguar, Pneumatic emergency lowering or without flush floor device
Landrover, Programmable pushbutton control unit Ceiling installation
Volkswagen Group
PL 2.40 Fn 460: Superstructure: Optional extras:
BMW / Mini, A set of platforms with drive-on
Opel Superstructure Platform:
ramps and stops Supporting legs for wheel
High-quality anti-slip coating in RAL 7016 - grey
alignment
Free-wheel lift Fn: Aluminium coating
Free-wheel lift with adjustability lengthwise Scissor jack
Rubber-coated, non-skid pads Play detector
Low minimum height Lighting set

Standard colours: Superstructure Fn:
Platforms: RAL 9006 - white XY-pads
Free-wheel lift: RAL 9006 - white aluminium
Ramps: Red 3020 - red Zinc coating and special
colours on request!

53

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 4,000 kg Platforms approx. 5,700 mm
Lifting capacity 1,960 mm Total length 4,600 mm
Lifting height 2,110 mm Usable legth of platform
Working height 2 x 140 mm Wheel base approx. 4,100 mm
Cylinder diameter 1,315 mm Platform width 605 mm
Distance between cylinders Distance between platforms 910 mm
approx. 30 sec. Drive-on height 150 mm
Lifting / lowering time
(high pressure) 2,625 mm Scissor jack (Option) 2,000 Kg
3 kW Lifting capacity 250 mm
Foundation depth Lifting height air-hydraulic
Pump unit approx. 10 l Operation middle / 790 – 1.610 mm
Hydraulic oil 230 / 400 V – 50 Hz – 16 A Lift positions
Voltage
3,500 Kg GST play detector (optional extra) 2,500 Kg
Free-wheel lift (Fn 460) 1,400 – 2,100 mm Max. axle load hydraulic
Lifting capacity 370 mm + Rubber pads Operation
Length
Lifting height 30 mm Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
Min. height
approx. 8 sec.
Lifting / lowering time
(high pressure) elektro-hydraulic

Operation

Profilift 2.40 Fn 460

Supporting legs

Integrated free-wheel lift

Flush platforms

54 INGROUND LIF TS

Biglift 2.50 Saa

Electro-hydraulic twin-ram lift, 5 t with superstructure with arms

Application Description: Versions:

Repairs and maintenance Steel cassette: Saa 230 & Saa 265
Body work Waterproof steel cassette
Steel cassette:
Approvals / recommendations Hydraulic unit: Zinc-coated
Hard-chrome plated cylinder Coated
Renault Flexible synchronization and safety system Self-carrying (Saa 230)
Saa 265: Corrosion-free guiding elements
Mercedes-Benz Pump unit with immersed motor Installation:
Hydraulic oil Superstructure on floor
Pneumatic emergency lowering Superstructure in floor
Programmable pushbutton control unit
Great stability, even with uneven weight with covers (Saa 230)
Ceiling installation (Saa 230)
distribution; due to the cylinder diameter
of 213 mm Optional extras:

Superstructure: Large program of extra pads
Double telescopic arms
Internal arm locking system Zinc coating and special
Low minimum height colours on request!

Saa 265:
Mechanical ratchet system integrated in

the hydraulic unit
Air preparation unit for oiled and regulated

compressed air ( min . 6 bar / max . 10 bar )

Standard colours:
Base plate: RAL 7016 - grey
Arms: RAL 3020 - red

55

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 5,000 kg Platforms 2,950 mm
Lifting capacity 1,865 mm Total width
Lifting height 2,005 – 2,065 mm Lifting pad included 11028 (135 – 195 mm)
Working height 2 x 213 mm in the delivery
Cylinder diameter Saa 230: 2,150 mm Min. height 135 – 195 mm
Saa 265: 2,650 mm Saa 230: 1,930 mm
Distance between cylinders Drive-through width Saa 265: 2,430 mm
approx. 45 sec.
Lifting / lowering time Arm length, min. - max. 715 – 1,410 mm
(high pressure) 2,625 mm
Foundation depth 3 kW
Pump unit 18 l
Hydraulic oil
Voltage 230 / 400 V – 50 Hz – 16 A

Superstructure on floor Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.

Superstructure with lifting
pads and wheel adaptors

ISnpterznifaisl cahremslZouckbienhgösry: sMteKmS-Adapter

56 INGROUND LIF TS

Biglift 2.55 Saa

Electro-hydraulic twin-ram lift, 5.5 t with superstructure with arms

Application Description: Versions:

Repairs and maintenance Steel cassette: Saa 230 & Saa 265
Body work Waterproof steel cassette
Steel cassette:
Approvals / recommendations Hydraulic unit: Zinc-coated
Hard-chrome plated cylinder Coated
Saa 230 & Saa 265: Flexible synchronization and safety system Self-carrying (Saaa 230)
Volkswagen Group Corrosion-free guiding elements
Pump unit with immersed motor Installation:
Hydraulic oil Superstructure on floor
Pneumatic emergency lowering Superstructure in floor
Programmable pushbutton control unit
Great stability, even with uneven weight distribution; with covers
Celing installation
due to the cylinder diameter of 213 mm
Optional extras:
Superstructure:
Double telescopic arms Large program of extra pads
Internal arm locking system
Low minimum height Zinc coating and special
colours on request!
Saa 265:
Mechanical ratchet system integrated in the

hydraulic unit
Necessary air pressure (clean, dry, lubricated):

min. 6 bar / max. 10 bar

Standard colours:
Base plate: RAL 7016 - grey
Arms: RAL 3020 - red

57

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 5,500 kg Arm superstructure 3,500 mm
Lifting capacity 1,860 mm Total width
Lifting height 1,995 - 2,055 mm Lifting pad included 11028 (135 – 195 mm)
Working height 2 x 213 mm in the delivery
Cylinder diameter Saa 230: 2,150 mm Min. height 135 – 195 mm
Saa 265: 2,650 mm Saa 230: 1,930 mm
Distance between cylinders Drive-through width Saa 265: 2,430 mm
approx. 45 sec.
Lifting / lowering time Arm length, min. - max. 835 – 1,725 mm
(high pressure) 2,625 mm
Foundation depth 3 kW
Pump unit 17 l
Hydraulic oil
Voltage 230 / 400 V – 50 Hz – 16 A

Auffahrrichtung2455 Superstructure on floor

Hub = 1860 Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.Serienausstattung:
min. ca.135 mm
max. ca.195 mm

(andere Steckpilze auf Anfrage)

Superstructure with lifting
Lpoardesmanipdswumheveol laundtaapstors

ISnpterznifaisl cahremslZouckbienhgösry: sMteKmS-Adapter

58 INGROUND LIF TS

Biglift 2.55 Saav 145 Jumbo

Electro-hydraulic twin-ram lift, 5.5 t with superstructure with arms

Application Description: Versions:

Repairs and maintenance Steel cassette: Steel cassette:
Waterproof steel cassette Zinc-coated
Approvals / recommendations Coated
Hydraulic unit: Self-carrying
Jaguar Hard-chrome plated cylinder
Landrover Flexible synchronization and safety system Installation:
Opel Corrosion-free guiding elements Superstructure on floor
Volkswagen Group Pump unit with immersed motor Ceiling installation
Hydraulic oil
Pneumatic emergency lowering Optional extras:
Programmable pushbutton control unit
Great stability, even with uneven weight Large program of extra pads

distribution; due to the cylinder diameter Zinc coating and special
of 213 mm colours on request!

Superstructure:
Double telescopic arms, crosswise adjustable
Internal arm locking system
Low minimum height

Standard colours
Base plate: RAL 7016 - grey
Arms: RAL 3020 - red

59

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 5,500 kg Arm superstructure 3,130 mm
Lifting capacity 1,865 mm Total width
Lifting height 2,000 – 2,060 mm 11028 (135 – 195 mm)
Working height 2 x 213 mm Lifting pad included
Cylinder diameter 1,350 mm in the delivery 135 – 195 mm
Distance between cylinders 715 – 1,410 mm
approx. 45 sec. Min. height
Lifting / lowering time Arm length, min. - max.
(high pressure) 2,625 mm
3 kW
Foundation depth 17 l
Pump unit
Hydraulic oil 230 / 400 V – 50 Hz – 16 A
Voltage

Slidable superstructure Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
ILnoterernmalipasrmumlovcokilnugntsaysstem
SCpoerrzoifsisiocnh-efsreZeugbueihdöinrg: MelKeSm-eAndtaspter

60 INGROUND LIF TS

Biglift 2.55 F 480

Electro-hydraulic twin-ram lift, 5.5 t with platforms

Application Description: Versions:

Check-in Steel cassette: Steel cassette:
Repairs and maintenance Waterproof steel cassette Zinc-coated
Test Coated
Hydraulic unit:
Hard-chrome plated cylinder Installation:
Flexible synchronization and safety system Superstructure on floor
Corrosion-free guiding elements Superstructure in floor
Pump unit with immersed motor
Hydraulic oil Optional extras:
Pneumatic emergency lowering
Programmable pushbutton control unit LED-lighting set
Great stability, even with uneven weight Scissor jack

distribution; due to the cylinder diameter Zinc coating and special
of 213 mm colours on request!

Superstructure:
A set of platforms with drive-on ramps and stops

Standard colours
Platforms: RAL 7016 - grey
Ramps: RAL 3020 - red

61

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 5,500 kg Platforms approx. 6,100 mm
Lifting capacity 1,865 mm Total length 4,800 mm
Lifting height 2,030 mm Usable legth of platform 4,300 mm
Working height 2 x 213 mm Wheel base 650 mm
Cylinder diameter 1,550 mm Platform width 900 mm
Distance between cylinders Distance between platforms 165 mm
approx. 45 sec. Drive-on height
Lifting / lowering time 2,600 Kg
(high pressure) 2,625 mm Scissor jack (Option) 250 mm
3 kW Lifting capacity air-hydraulic
Foundation depth 17 l Lifting height middle / 790 – 1,460 mm
Pump unit Operation
Hydraulic oil 230 / 400 V – 50 Hz – 16 A Lift positions
Voltage

Hub = 1860 Scissor jack Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
LNoorne-mskipdssuumrfavcoeluntas
LSEpDezlifgishctihnegssZeutbehör: MKS-Adapter

62 INGROUND LIF TS

Biglift 4.55 Combi

Electro-hydraulic 2xtwin-ram lift, 5.5 t with platforms and Free-wheel lift with arms

Application Description: Versions:

Check-in Steel cassette: Steel cassette:
Repairs and maintenance Waterproof steel cassette Zinc-coated
Test Coated
Hydraulic unit:
Approvals / recommendations Hard-chrome plated cylinder Installation:
Flexible synchronization and safety system Superstructure on floor
Volkswagen Group Corrosion-free guiding elements Superstructure in floor with or
Pump unit with immersed motor
Hydraulic oil without flush floor device
Pneumatic emergency lowering
Programmable pushbutton control unit Optional extras:

great stability, even with uneven weight LED-lighting set
distribution (all 4 cylinders in operation) Large program of extra pads

Superstructure: Zinc coating and special
A set of platforms with drive-on ramps and stops colours on request!

Free-wheel device Saav:
Double telescopic arms, crosswise adjustable
Internal arm locking system
Low minimum height

Standard colours
Platforms: RAL 7016 - grey
Saav: Base plates RAL 7016 - grey,

arms and sliders RAL 3020 - red
Ramps: RAL 3020 - red

63

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 5,500 kg Arm superstructure 3,134 mm
Lifting capacity 1,895 mm Total width
Lifting height F: 2,060 mm Lifting pad 11028 (135 – 195 mm)
Working height RFH 2,195 - 2,255 mm included in the delivery
Cylinder diameter 8 x 140 mm Min. height 135 – 195 mm
Distance between cylinders 1,240 – 1,850 mm Arm length, min. - max. 715 – 1,410 mm
Lifting / lowering time
(high pressure) approx. 38 sec. Platforms approx. 6,800 mm
Foundation depth Total length 5,500 mm
Pump unit 2,625 mm Usable legth of platform
Hydraulic oil 3 kW Wheel base approx. 5,000 mm
Voltage 20 l Platform width 650 mm
Distance between platforms 900 mm
65 230 / 400 V – 50 Hz – 16 A Drive-on height 165 mm

43 21

Biglift 4.55 Combi1895
min. ca. 135
DD max. ca. 195

C Auffahrrichtung rungen vorbehalten *Stand 10.02.2017 Steady lift with Saav free-wheel lift
B Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
C

LED lighting set

B

Slidable superstructure

64 INGROUND LIF TS

Biglift 2.65 Saaa

Electro-hydraulic twin-ram lift, 6.5 t with superstructure with arms

Application Description: Versions:

Repairs and maintenance Steel cassette: Saaa 145, Saaa 230, Saaa 265
Body work Waterproof steel cassette
Steel cassette:
Approvals / recommendations Hydraulic unit: Zinc-coated
Hard-chrome plated cylinder Coated
Saaa 145: Flexible synchronization and safety system Self-carrying (Saaa 230)
Volkswagen Group Corrosion-free guiding elements
Pump unit with immersed motor Installation:
Saaa 230: Hydraulic oil Superstructure on floor
Renault, Pneumatic emergency lowering Superstructure in floor with
Volkswagen Group Programmable pushbutton control unit
Great stability, even with uneven weight covers
Saaa 265: Ceiling installation
Mercedes-Benz, distribution; due to the cylinder diameter
Volkswagen Group of 213 mm Optional extras:

Superstructure: Large program of extra pads
Triple telescopic arms
Internal arm locking system Zinc coating and special
Low minimum height colours on request!

Saaa 265:
Mechanical ratchet system integrated

in the hydraulic unit
Air preparation unit for oiled and regulated

compressed air ( min . 6 bar / max . 10 bar )

Standard colours
Base plates: RAL 7016 - grey
Arms: RAL 3020 - red

65

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 6,500 kg Arm superstructure 3,350 mm
Lifting capacity 1,865 mm Total width
Lifting height 3,350 mm Lifting pad included 11028 (135 – 195 mm)
Working height 2 x 213 mm in the delivery
Cylinder diameter Min. height 135 – 195 mm
Saaa 145: 1,350 mm Saaa 230: 1,930 mm
Distance between cylinders Saaa 230: 2,150 mm Drive-through width Saaa 265: 2,430 mm
Saaa 265: 2,650 mm
Lifting / lowering time Arm length, min. - max. 770 – 1,640 mm
(high pressure) approx. 45 sec.
Foundation depth
Pump unit 2,625 mm
Hydraulic oil 3 kW
Voltage 18 l

230 / 400 V – 50 Hz – 16 A

Biglift 2.65 Saaa 265 Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.

Triple telescopic arms
with roller bearings

Various optional extras

Arm locking system

66 INGROUND LIF TS

Biglift 2.65 F 550

Electro-hydraulic twin-ram lift, 6.5 t with platforms

Application Description: Versions:

Check-in Steel cassette: Steel cassette:
Repairs and maintenance Waterproof steel cassette Zinc-coated
Test Coated
Hydraulic unit:
Approvals / recommendations Hard-chrome plated cylinder Installation:
Flexible synchronization and safety system Superstructure on floor
Renault Corrosion-free guiding elements Superstructure in floor
Volkswagen Group Pump unit with immersed motor
Hydraulic oil Optional extras:
Pneumatic emergency lowering
Programmable pushbutton control unit LED-lighting set
Great stability, even with uneven weight Scissor jack

distribution; due to the cylinder diameter Zinc coating and special
of 213 mm colours on request!

Superstructure:
A set of platforms with drive-on ramps and stops

Standard colours
Platforms: RAL 7016 - grey
Ramps: RAL 3020 - red

67

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 6,500 kg Platforms approx. 6,800 mm
Lifting capacity 1,860 mm Total length 5,500 mm
Lifting height 2,040 mm Usable legth of platform
Working height 2 x 213 mm Wheel base approx. 5,000 mm
Cylinder diameter 1,550 mm Platform width 650 mm
Distance between cylinders Distance between platforms 900 mm
approx. 45 sec. Drive-on height 180 mm
Lifting / lowering time
(high pressure) 2,625 mm Scissor jack (Option) 2,600 Kg
3 kW Lifting capacity 250 mm
Foundation depth 17 l Lifting height air-hydraulic
Pump unit Operation middle / 790 – 1,460 mm
Hydraulic oil 230 / 400 V – 50 Hz – 16 A Lift positions
Voltage

Biglift 2.65 F 550 Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
Scissor jack

Non-skid surface

LED lighting set

68 INGROUND LIF TS

Quattrolift 4.55 KA 1550 / 3000

Electro-hydraulic 4-ram lift, 5.5 t, with platforms

Application Description: Versions:

Check-in Steel cassette: Steel cassette:
Repairs and maintenance Waterproof steel cassette Zinc-coated
Wheel alignment Coated
Test Hydraulic unit:
2 separate hydraulic units with Installation:
Approvals / recommendations Superstructure on floor
hard-chrome plated cylinders Superstructure in floor
QL 4.55 F 480: Electronic synchronization between the
BMW / Mini with or without flloor alignment
hydraulic units and pre-programmed top stop system
QL 4.55 F 550: Flexible synchronization and safety system
Renault, Corrosion-free guiding elements Contact us with regard to
Volkswagen Group Pump unit with immersed motor the possibilities of combining
Hydraulic oil with other wheel alignment
Rolls-Royce Pneumatic emergency lowering equipment!
Programmable pushbutton control unit
Air preparation unit for oil and regulated compressed Optional extras:
air ( min. 6 bar / max. 10 bar)
LED-lighting set
Superstructure: Precision slip plates
A set of platforms with drive-on ramps and stops Scissor jack

Platforms with tolerances of only max ± 0,5 mm Special colours available
length- and crosswise on request!

With two recesses front and rear, as well as distance
pieces covering the entire length and fixated by
steel edges in sides

Preparation for innovative air supply for jacking beam

Standard colours
Platforms: RAL 7016 - grey
Ramps: RAL 3020 - red
All surfaces zinc-coated as standard

69

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 5,500 kg Platforms F 480: 4,800 mm
Lifting capacity 1,865 mm F 550: 5,500 mm
Lifting height 2,060 mm Usable legth of platform
Working height 4 x 140 mm F 480: 4,150 mm
Cylinder diameter 1,550 / 3,000 mm Wheel base F 550: 4,850 mm
Distance between cylinders
approx. 30 sec. Platform width 650 mm
Lifting / lowering time Distance between platforms 900 mm
(high pressure) 2,625 mm Drive-on height 195 mm
2 x 3 kW
Foundation depth Scissor jack (Option) 2,600 Kg
Pump unit 18 l Lifting capacity 250 mm
Hydraulic oil 230 / 400 V – 50 Hz – 16 A Lifting height air-hydraulic
Voltage Operation middle / 790 – 1,460 mm
Lift positions

Quattrolift 4.65 F 480/550 Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.

Turn table and fillers fixed in list

Air supply for scissor jack

Wheel alignment

70 INGROUND LIF TS

Quattrolift 4.65 F480 / 550

Electro-hydraulic 4-ram lift, 6.5 t, with platforms

Application Description: Versions:

Check-in Steel cassette: Steel cassette:
Repairs and maintenance Waterproof steel cassette Zinc-coated
Wheel alignment Coated
Test Hydraulic unit:
2 separate hydraulic units with Installation:
Approvals / recommendations Superstructure in floor with or
hard-chrome plated cylinders
QL 4.65 F 550: Electronic synchronization between the without floor alignment system
Mercedes-Benz,
Volkswagen Group hydraulic units and pre-programmed top stop Contact us with regard to
Flexible synchronization and safety system the possibilities of combining
Corrosion-free guiding elements with other wheel alignment
Pump unit with immersed motor equipment!
Hydraulic oil
Pneumatic emergency lowering Optional extras:
Programmable pushbutton control unit
Air preparation unit for oiled and regulated compressed LED-lighting set
air ( min . 6 bar / max . 10 bar ) Precision slip plates
Scissor jack
Superstructure:
A set of platforms with drive-on ramps and stops Special colours available
on request!
Platforms with tolerances of only max ± 0,5 mm
length- and crosswise

With two recesses front and rear, as well as distance
pieces covering the entire length and fixated by
steel edges in sides

Preparation for innovative air supply for jacking beam

Standard colours
Platforms: RAL 7016 - grey
Ramp: RAL 3020 - red
All surfaces zinc-coated as standard

71

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 6,500 kg Fv Uni superstructure F 480: 4,800 mm
Lifting capacity 1,865 mm F 550: 5,500 mm
Lifting height 2,060 mm Usable legth of platform
Working height 4 x 213 mm F 480: 4,150 mm
Cylinder diameter 1,550 / 3,000 mm Wheel base F 550: 4,850 mm
Distance between cylinders
approx. 35 sec. Platform width 650 mm
Lifting / lowering time Distance between platforms 900 mm
(high pressure) 2,625 mm Drive-on height 195 mm
2 x 3 kW
Foundation depth Scissor jack (Option) 2,600 Kg
Pump unit 18 l Lifting capacity 250 mm
Hydraulic oil 230 / 400 V – 50 Hz – 16 A Lifting height air-hydraulic
Voltage Operation middle / 790 – 1,460 mm
Lift positions

Slip plate fixed in list Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.

Installation in
rectangular recess

Slip plate, list and MKS adaptor

72 INGROUND LIF TS

Triolift 3.35 Fn 420

Electro-hydraulic 3-level work bay, 3.5 t, with platforms and scissor free-wheel lift

Application Description: Scissor free-wheel lif:
Check-in Electro-hydraulic with safety
Repair and maintenance Work on 3 levels: underbody, wheels and brakes,
motor ratchet, integrated into platforms
Approvals / recommendations for low drive-over height
Opel The perfect team bay for quick execution at high
efficiency and little space requirement! Electronic monitoring of
synchronization
Pit:
1 entrance / exit stair with 4 steps at rear end Delivery inclusive of 1 set of 4,
H = 80 mm rubber blocks
Hydraulic unit:
2 hard-chrome plated hydraulic cylinders for raising Podium:
Integrated control post with
of platforms, running smoothly in end position
Levelling device and pneumatic safety ratchet programmable pushbutton
Safety system through rigid fixation at the podium control unit and alarm signal /
Electronic monitoring of synchronization CE-stop
Hydraulic pump unit with immersed motor
Ecological hydraulic fluid Board with many holes for easy
Pneumatic emergency lowering fixation of mirrors and other
Air preparation unit for oiled and regulated compressed accessories or tools

air (min. 6 bar / max. 10 bar) Integrated tool tray system
Traffic mirror for monitoring of
Platforms: drive-in situation and for
A set of platforms with drive-on ramps and integrated checking functionality of
headlamps
stops in rear left and drive-over stops in front left position Steps on both sides left and right
Lengthwise movable platform enlargement as step 1 compressed air connection on
each side, front left and front
tread or as additional tool tray right podium leg
Bracket for impact wrench and holder for rubber blocs Expansion bolts incl.
LED-lighting set with adjustable light angle
As standard skid-proof surfaces Standard colours:
Platforms: RAL 7016 - grey
Ramps, podium: RAL 3020 - red

73

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 3,500 kg Platforms approx. 6,600 mm
Lifting capacity 500 mm Total length 4,200 mm
Stroke length 650 mm (F) + 900 mm (Pit) Usable legth of platform
Working height approx. 5 sec. Wheel base max. approx. 3,700 mm
Lifting / lowering time 1,340 mm (Pit) Platform width 570 mm
Foundation depth Distance between platforms 905 mm
Pump unit 3 kW Drive-on height
Hydraulic oil 10 l approx. 150 mm
Voltage 230/400 V / 50 Hz / 16 A Free-Wheel lift
Lifting capacity 3,500 kg
Pit 4,980 mm Length 1,450 - 2,060 mm
Length 990 mm Lifting height 379 mm + rubber blocks
Width 900 mm Drive-over height
Depth Lifting / lowering time 30 mm
Operation approx. 8 sec.
electro-hydraulic

Optional extras: ject to modifications * date 22 june, 2017

Wheel retaining device for inner sides of platforms Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
24 l oil funnel
1,700 mm drive-on ramps
Traverse for lifting 4 x 4 vehicles

Triolift 3.35 Fn 420

Special versions and colours on request

LED lighting set with adjustable
light angle – Wheel retaining device

drive-on direction 24 l oil funnel

74 SURFACE-MOUNTED LIF TS

Our surface-mounted lifts.

Find out more:
www.autopstenhoj.com

75 Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.

Surface-mounted lifts

Product benefits / arguments ............................................................. 77

Single-post lift ................................................................................... 80
- Mistral H 25............................................................................................................... 80

2-post lifts – electro-mechanical ...................................................... 82
- Maestro 30 ............................................................................................................... 82
- Maestro 32 ............................................................................................................... 84
- Maestro 35 ............................................................................................................... 86
- Maestro 2.30 ........................................................................................................... 88
- Maestro 2.32 ........................................................................................................... 90
- Maestro 2.35 ........................................................................................................... 92
- Maestro 2.35 Sport ................................................................................................ 94
- Maestro 2.50 ........................................................................................................... 96
- Maestro 2.55 ........................................................................................................... 98
- Maestro 2.65 .......................................................................................................... 100

2-post lifts – electro-hydraulic ......................................................... 102
- Magnat 35 ............................................................................................................... 102
- Magnat 40 ............................................................................................................... 104

4-post lifts – electro-hydraulic.......................................................... 106
- Major 4026 ............................................................................................................... 106
- Major 4030 ............................................................................................................... 108
- Major 4030-44 WL DLX .......................................................................................... 110
- Major 5030-53 W Combi ........................................................................................ 112
- Major 5230 ................................................................................................................ 114
- Major 6230 ................................................................................................................ 116
- Major 7230 ................................................................................................................ 118
- Major ATL /MOT ....................................................................................................... 120

Scissor jacks .................................................................................... 122
- Micro 20 & 26 & 40 air-hydraulic........................................................................... 122
- Micro 20 & 26 LH automatic ................................................................................. 124
- Micro 20 & 26 full-hydraulic .................................................................................. 126


Scissor lifts – electro-hydraulic......................................................... 128
- MagiX 30 LS.............................................................................................................. 128
- MagiX 30 .................................................................................................................. 130
- MagiX 35 .................................................................................................................. 132
- MagiX 45 .................................................................................................................. 134
- MagiX 50 .................................................................................................................. 136

Accessories ..................................................................................... 138

76 SURFACE-MOUNTED LIF TS

The sturdiest post
on the market  …

… shouldn’t be hidden in the ground.
All our 2-post lifts are equipped with cold-rolled spindles with nut sets made in
high quality nylon, guaranteeing very little tear and wear. Our posts, irregardless
of design are incredibly stable – to the benefit of all our customers.
Top quality is equal to a high degree of safety. Our surface-mounted lifts are
naturally equipped with all necessary safety features.

The safety systems: There are quite a few.
You can rely on the many safety systems our surface-mounted lifts are equipped with:

System against nut breakage
Obstruction system
Electronic synchronization
Alarm signal
Control unit with deadman-control and separate main switch

Small investment – many advantages.
Low investment costs
Many installation possibilities
The right lift for the right purpose

You can promise only once.
But you can guarantee five years.
After the delivery of your lift you have an allround warranty of five years.
This applies not only to the main components, but also to the spindles, nuts
and carriage.

77

From one advantage to the next.

THE MOST COMBIFLEX-08 PAD COLD- Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
STABLE POST ROLLED SPINDLE
ON THE MARKET

CORROSION
PROTECTION
AND
MUCH MORE

RATCHET FOR EASY HEIGHT
PARKING POSITION ADJUSTMENT

INTERNAL ARM NUT SET OF HIGH PROVEN
LOCKING SYSTEM QUALITY NYLON CARRIAGE DESIGN

78 SURFACE-MOUNTED LIF TS

Your lifts are pillars of
your workshop‘s success.

The surface-mounted lifts from AUTOPSTENHOJ offer almost as many models
as the range of capacities. We offer everything from 2-post lifts with 3 t ca-
pacities to special solutions for e.g. a transporter with up to 7.2 t capacity. Our
program offers possibilities for almost all weights and applications.

79

The main applications for our lifts are repair and maintenance, but we also focus
on other areas such as check-in and wheel alignment. A good example of the
latter is our Major 4030-44 WL DLX, which is the most precise wheel alignment
lift on the market; and we are certain of that, as the lift complies with even the
strictest demands from the car manufacturers.

80 SURFACE-MOUNTED LIF TS

Mistral H 25

Electro-hydraulic single post lift, 2.5 t capacity

Application Description: Versions /
Optional extras:
Repair and maintenance Simple, sturdy post
Car wash Takes up very little room in the workshop Available with different voltages
(requires service every Easy access to both sides of vehicle Available with 2 different arm
3 months) Single telescopic arms configurations with either
S or C pads
Standard colours
Arms: RAL 3020 – red Special colours available on
Post: RAL 7016 – grey request!

81

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 2,500 kg Arm superstructure C: 105 – 315 mm
Lifting capacity 1,900 mm Lifting pad included in the S: 115 – 220 mm
Lifting height delivery
C: 2,005 – 2,215 mm Min. height 105 mm
Working height S: 2,015 – 2,120 mm Total height 2,675 mm

Lifting / lowering time 45 sec. Arm length front, min. - max. C: 605 – 975 mm
Pump unit 1.5 kW S: 550 – 885 mm
Voltage 3x230 / 400V – 50 Hz Arm length rear, min. - max.
C: 605 – 975 mm
S: 550 – 885 mm

Screw pad Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
Combi pad

82 SURFACE-MOUNTED LIF TS

Maestro 30

Electro-mechanical 2-post lift, 3 t capacity

Application Description: Versions:
Repair and maintenance
Posts: Available with different voltages
Approvals / recommendations Asymmetric post installation F = flex pad
Volkswagen Group Very stable bent posts CF = combiflex pad
Volvo Without base frame CF-08 = combiflex 08 pad
Two motors DT/- = double telescopic short
Cold-rolled spindle arms, single telescopic long arms
Nylon nut sets
Carriage with slide blocks Optional extras:
Pushbutton control unit with alarm signal
Programmable top stop Available with 2 different portal
Electronic synchronization heights; alternatively in-ground kit

Arms: LED-lighting set
Single telescopic front and rear arms, as standard Power pack
Possibility of parallel parking of arms Set of expansion bolts
Internal arm locking system Extra control unit
Low minimum height Large program of extra pads

Standard colours: Special colours available
Arms: RAL 3020 – red on request!
Posts: RAL 7016 – grey

83

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 3,000 kg Arm superstructure F: 777112 (30 – 60 mm)
Lifting capacity 1,900 mm CF: 777539
Lifting height 1,995 – 2,025 mm Lifting pad included in the
Working height approx. 40 sec. delivery CF-08: 777395 + 660501
Lifting / lowering time 2 x 1.5 kW 95 mm
Motor 3 x 230 / 400V – 50 Hz – 25 / 16 A Min. height
Voltage Drive-through width 2,110 – 2,310 mm
Width between posts 2,365 – 2,565 mm
Total width -
outer edges posts 2,875 – 3,075 mm

Total width - 3,120 – 3,320 mm
outer edges base plates
Total height post 2,706 mm
Total height incl. portal 4,050 / 4,350 mm
F Std: 540 – 850 mm
Arm length front, min. - max. F DT: 480 – 840 mm
900 – 1,425 mm
Arm length rear, min. - max.

FC-FP-apdad / CF-08 pad / F-pad Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
GInetesrcnhaül tazrtme Slocchkwinegnksaysrmtevmerriegelung

84 SURFACE-MOUNTED LIF TS

Maestro 32

Electro-mechanical 2-post lift, 3.2 t capacity

Application Description: Versions:

Repair and maintenance Posts: Available with different voltages
Asymmetric post installation F = flex pad
Approvals / recommendations Very stable bent posts CF = combiflex pad
Without base frame CF-08 = combiflex 08 pad
BMW/Mini Two motors DT/- = double telescopic short
Volkswagen Group Cold-rolled spindle arms, single telescopic long arms
Renault Nylon nut sets VAN = single telescopic short
Carriage with slide blocks arms, single telescopic long arms
Pushbutton control unit with alarm signal
Programmable top stop Optional extras:
Electronic synchronization
Available with 2 different portal
Arms: heights; alternatively in-ground kit
Single telescopic front and rear arms, as standard
Possibility of parallel parking of arms LED-lighting set
Internal arm locking system Power pack
Low minimum height Set of expansion bolts
Extra control unit
Standard colours: Large program of extra pads
Arms: RAL 3020 – red
Posts: RAL 7016 – grey Special colours available
on request!

85

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 3,200 kg Arm superstructure F: 777112 (30 - 60 mm)
Lifting capacity 1,900 mm CF: 777504
Lifting height 1,995 - 2,025 mm Lifting pad included in the
Working height approx. 40 sec. delivery CF-08: 777395 + 660501
Lifting / lowering time 2 x 1.5 kW 95 mm
Motor 3 x 230 / 400V – 50 Hz – 25 / 16 A Min. height
Voltage Drive-through width 2,110 – 2,310 mm
Width between posts 2,365 – 2,565 mm
Total width -
outer edges posts 2,875 – 3,075 mm

Total width - 3,120 – 3,320 mm
outer edges base plates
Total height post 2,706 mm
Total height incl. portal 4,050 / 4,350 mm
F Std: 540 – 850 mm
Arm length front, min. - max. F DT: 480 – 840 mm
F Std: 900 – 1,425 mm
Arm length rear, min. - max. F DT: 800 – 1,425 mm

CF-pad / CF-08 pad / F-pad Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
Internal arm locking system

86 SURFACE-MOUNTED LIF TS

Maestro 35

Electro-mechanical 2-post lift, 3.5 t capacity

Application Description: Versions:
Repair and maintenance
Posts: Available only with 400 V /
Asymmetric post installation 3 phases, 50 cycles
Very stable bent posts
Without base frame F = flex pad
Two motors CF = combiflex pad
Cold-rolled spindle CF-08 = combiflex 08 pad
Nylon nut sets DT/DT = 4 double telescopic arms
Carriage with slide blocks
Pushbutton control unit with alarm signal Optional extras:
Programmable top stop
Electronic synchronization Available with 2 different portal
heights; alternatively
Arms: in-ground kit
Single telescopic front and double telescopic
LED-lighting set
rear arms, as standard Power pack
Possibility of parallel parking of arms Set of expansion bolts
Internal arm locking system Extra control unit
Low minimum height Extension set for 2.35 F Version
Large program of extra pads
Standard colours:
Arms: RAL 3020 – red Special colours available
Posts: RAL 7016 – grey on request!

87

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 3,500 kg Arm superstructure F: 777395
Lifting capacity 1,900 mm CF: 777505
Lifting height 1,995 – 2,025 mm Lifting pad included in the CF-08: 660501 + 777395
Working height approx. 40 sec. delivery
Lifting / lowering time 2 x 2.8 kW 95 mm
Motor 3 x 400V – 50 Hz – 25 A Min. height 2,290 mm
Voltage Drive-through width 2,565 mm
Width between posts
Total width - 3,075 mm
outer edges posts
3,320 mm
Total width -
outer edges base plates 2,706 mm
4,350 mm
Total height post F Std: 600 – 1,220 mm
Total height incl. portal F Std: 900 – 1,425 mm
Arm length front, min. - max. F DT: 600 – 1,220 mm

Arm length rear, min. - max.

CF-pad / CF-08 pad / F-pad Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
Internal arm locking system

88 SURFACE-MOUNTED LIF TS

Maestro 2.30

Electro-mechanical 2-post lift, 3 t capacity

Application Description: Versions:
Repair and maintenance
Posts: Available with different voltages
Approvals / recommendations Asymmetric post installation F = flex pad
Renault Very stable welded posts CF-08 = combiflex 08 pad
Without base frame
Two motors Optional extras:
Cold-rolled spindle
Nylon nut sets Available with 2 different portal
Carriage with 6 guiding wheels and heights; alternatively in-ground kit

lubrication-free roller bearings LED-lighting set
Pushbutton control unit with alarm signal Power pack
Programmable top stop Set of expansion bolts
Electronic synchronization Extra control unit
Long door stops
Arms: Wheel holders
Single telescopic front and rear arms, as standard Large program of extra pads
Possibility of parallel parking of arms
Internal arm locking system Special colours available
Low minimum height on request!

Standard colours:
Arms: RAL 3020 – red
Posts: RAL 7016 – grey

89

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 3,000 kg Arm superstructure F: 777395 (25 – 55 mm)
Lifting capacity 1,900 mm Lifting pad included in the CF: 777539 (25 – 190 mm)
Lifting height 1,995 – 2,025 mm delivery
Working height approx. 40 sec. Min. height 95 mm
Lifting / lowering time 2 x 1.5 kW Drive-through width 2,120 – 2,320 mm
Motor 3 x 230 / 400V – 50 Hz – 35 / 25 A Width between posts 2,380 – 2,580 mm
Voltage Total width -
outer edges posts 2,920 – 3,120 mm

Total width - 3,286 – 3,486 mm
outer edges base plates
Total height post 2,690 mm
Total height incl. portal 4,050 / 4,350 mm
F Std: 540 – 850 mm
Arm length front, min. - max. F DT: 480 – 840 mm

Arm length rear, min. - max. F Std1: 900 – 1,425 mm
F Std2: 800 – 1,250 mm

CF-pad / CF-08 pad / F-pad Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
Stable, welded post

90 SURFACE-MOUNTED LIF TS

Maestro 2.32

Electro-mechanical 2-post lift, 3.2 t capacity

Application Description: Versions:
Repair and maintenance
Posts: Available with different voltages
Approvals / recommendations Asymmetric post installation F = flex pad
Jaguar Very stable welded posts CF-08 = combiflex 08 pad
Renault Without base frame
Two motors Optional extras:
Cold-rolled spindle
Nylon nut sets Available with 2 different portal
Carriage with 6 guiding wheels and heights; alternatively in-ground kit

lubrication-free roller bearings LED-lighting set
Pushbutton control unit with alarm signal Power pack
Programmable top stop Set of expansion bolts
Electronic synchronization Extra control unit
Long door stops
Arms: Wheel holders
Single telescopic front and rear arms, as standard Extension set for 2.35 F
Possibility of parallel parking of arms Large program of extra pads
Internal arm locking system
Low minimum height Special colours available
on request!
Standard colours:
Arms: RAL 3020 – red
Posts: RAL 7016 – grey

91

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technische Daten 3,200 kg Arm superstructure F: 777395 (25 – 55 mm)
Lifting capacity 1,900 mm Lifting pad included CF-08: 777395 (25 – 180 mm)
Lifting height 1,995 – 2,150 mm in the delivery
Working height approx. 40 sec. Min. height 95 mm
Lifting / lowering time 2 x 1.5 kW Drive-through width 2,120 – 2,320 mm
Motor 3 x 230 / 400V – 50 Hz – 35 / 25 A
Voltage Width between posts 2,380 – 2,580 mm

Total width - outer 2,960 - 3,160 mm
edges posts
3,120 - 3,320 mm
Total width -
outer edges base plates 2,713 mm
Total height post 4,050 / 4,350 mm
Total height incl. portal F Std: 540 – 850 mm
F DT: 480 – 840 mm
Arm length front, min. - max. F Std1: 900 – 1,425 mm
F Std2: 800 – 1,250 mm
Arm length rear, min. - max.

CF-pad / CF-08 pad / F-pad Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
Stable, welded post

92 SURFACE-MOUNTED LIF TS

Maestro 2.35

Electro-mechanical 2-post lift, 3.5 t capacity

Application Description: Versions:
Repair and maintenance
Posts: Available with different voltages
Approvals / recommendations Asymmetric post installation F = flex pad
Renault Very stable welded posts CF-08 = combiflex 08 pad
Without base frame
Two motors Optional extras:
Cold-rolled spindle
Nylon nut sets Available with 2 different portal
Carriage with 6 guiding wheels and heights; alternatively in-ground kit

lubrication-free roller bearings LED-lighting set
Pushbutton control unit with alarm signal Power pack
Programmable top stop Set of expansion bolts
Electronic synchronization Extra control unit
Long door stops
Arms: Wheel holders
Double telescopic front and single telescopic Extension set for 2.35 F
Large program of extra pads
rear arms, as standard
Possibility of parallel parking of arms Special colours available
Internal arm locking system on request!
Low minimum height

Standard colours:
Arms: RAL 3020 – red
Posts: RAL 7016 – grey

93

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 3,500 kg Arm superstructure F: 777395 (25 - 55 mm)
Lifting capacity 1,900 mm CF-08: 777395 (25 - 180 mm)
Lifting height 1,995 — 2,150 mm Lifting pad included
Working height approx. 35 sec. in the delivery 95 mm
Lifting / lowering time 2 x 2.8 kW 2,290 mm
Motor 3x230/400 V-50Hz - 35/25A Min. height 2,580 mm
Voltage Drive-through width
Width between posts 3,120 mm

Total width - outer edges 3,320 mm
posts
2,713 mm
Total width - outer edges 4,350 mm
base plates F Std: 600 - 1,220 mm
F Std: 900 - 1,425 mm
Total height post F DT: 600 - 1,220 mm
Total height incl. Portal
Arm length front, min. - max.

Arm length rear, min. - max.

CF-pad / CF-08 pad / F-pad Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
Stable, welded post

94 SURFACE-MOUNTED LIF TS

Maestro 2.35 Sport

Electro-mechanical 2-post lift, 3.5 t capacity

Application Description: Versions:

Repair and maintenance Posts: Available with different voltages
Asymmetric post installation F = flex pad
Approvals / recommendations Very stable welded posts
Without base frame Optional extras:
Mercedes-Benz Two motors
Renault Cold-rolled spindle Available with 2 different portal
Volkswagen Group Nylon nut sets heights; alternatively in-ground kit
Carriage with 6 guiding wheels and
LED-lighting set
lubrication-free roller bearings Power pack
Pushbutton control unit with alarm signal Set of expansion bolts
Programmable top stop Extra control unit
Electronic synchronization Long door stops
Wheel holders
Arms: Set of 4 wheel forks (400 mm)
Double telescopic front and rear arms, as standard Large program of extra pads
Internal arm locking system
Low minimum height Special colours available
on request!
Standard colours:
Arms: RAL 3020 – red
Posts: RAL 7016 – grey

95

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 3,500 kg Arm superstructure F: 29265 (25 – 50 mm)
Lifting capacity 1,900 mm
Lifting height 1,970 – 1,995 mm Lifting pad included 70 mm
Working height approx. 35 sec. in the delivery 2,400 mm
Lifting / lowering time 2 x 2.8 kW 2,700 mm
Motor 3 x 230 / 400V – 50 Hz – 35 / 25 A Min. height
Voltage Drive-through width 3,242 mm
Width between posts
3,500 mm
Total width - outer edges
posts 2,713 mm
4,350 mm
Total width - 707 – 1,443 mm
outer edges base plates 707 – 1,443 mm

Total height post
Total height incl. Portal
Arm length front, min. - max.
Arm length rear, min. - max.

Stable, welded post Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
Internal arm locking system
HCaurbrsiatguehlwith rollers

96 SURFACE-MOUNTED LIF TS

Maestro 2.50

Electro-mechanical 2-post lift, 5 t capacity

Application Description: Versions:

Repair and maintenance Posts: Available with different voltages
Symmetric post installation F = flex pad
Approvals / recommendations Very stable welded posts L = long arms
Without base frame
BMW / Mini Two motors Optional extras:
Renault Cold-rolled spindle
Rolls-Royce Nylon nut sets Available with portal or in-ground kit
Carriage with 6 guiding wheels and LED-lighting set
Power pack
lubrication-free roller bearings Set of expansion bolts
Pushbutton control unit with alarm signal Extra control unit
Programmable top stop Long door stops
Electronic synchronization Wheel holders
Set of 4 wheel forks (400 mm)
Arms: Large program of extra pads
4 double telescopic arms
Internal arm locking system Special colours available
Low minimum height on request!

Standard colours:
Arms: RAL 3020 – red
Posts: RAL 7016 – grey

97

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 5,000 kg Arm superstructure F: 770505 (30 – 60 mm)
Lifting capacity 1,900 mm Lifting pad included
Lifting height in the delivery F Sport: 122 mm
F Sport: 2.022 – 2,052 mm FL: 140 mm
Working height FL: 2,040 - 2,070 mm Min. height
2,800 – 3,000 mm
Lifting / lowering time approx. 55 sec. Drive-through width 3,185 – 3,385 mm
Motor 2 x 2.8 kW Width between posts
Voltage Total width - 3,560 – 3,760 mm
3 x 230 / 400V – 50 Hz – 35 / 25 A outer edges posts
3,910 – 4,110 mm
Total width -
outer edges base plates 2,908 mm
Total height post 4,910 – 5,270 mm
Total height incl. portal F Sport: 875 – 1,930 mm
FL: 957 – 2,138 mm
Arm length front, min. - max.
F Sport: 875 – 1,930 mm
Arm length rear, min. - max. FL: 957 – 2,138 mm

Stable, welded post Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.

F-Pad

Nylon nut sets

98 SURFACE-MOUNTED LIF TS

Maestro 2.55

Electro-mechanical 2-post lift, 5.5 t capacity

Application Description: Versions:
Repair and maintenance
Posts: Available with different voltages
Approvals / recommendations Symmetric post installation F = flex pad
Volkswagen Group Very stable welded posts
Without base frame Optional extras:
Two motors
Cold-rolled spindle Available with portal or in-ground kit
Nylon nut sets LED-lighting set
Carriage with 6 guiding wheels and Power pack
Set of expansion bolts
lubrication-free roller bearings Extra control unit
Pushbutton control unit with alarm signal Long door stops
Programmable top stop Wheel holders
Electronic synchronization Large program of extra pads

Arms: Special colours available
4 double telescopic arms on request!
Internal arm locking system
Low minimum height

Standard colours:
Arms: RAL 3020 – red
Posts: RAL 7016 – grey

99

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 5,500 kg Arm superstructure F: 770505 (30 – 60 mm)
Lifting capacity 1,900 mm Lifting pad included 140 mm
Lifting height 2,040 – 2,070 mm in the delivery
Working height approx. 55 sec. Min. height 2,800 – 3,000 mm
Lifting / lowering time 2 x 2.8 kW Drive-through width 3,185 – 3,385 mm
Motor 3 x 230 / 400V – 50 Hz – 35 / 25 A
Voltage Width between posts 3,560 – 3,760 mm

Total width - 3,910 – 4,110 mm
outer edges posts 2,908 mm

Total width - 4,910 – 5,270 mm
outer edges base plates 957 – 1,900 mm
Total height post 957 – 1,900 mm
Total height incl. portal
Arm length front, min. - max.
Arm length rear, min. - max.

F-Pad Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
Stable, welded post
Carriage with rollers

100 SURFACE-MOUNTED LIF TS

Maestro 2.65

Electro-mechanical 2-post lift, 6.5 t capacity

Application Description: Versions:
Repair and maintenance
Posts: Available with different voltages
Approvals / recommendations Symmetric post installation F = flex pad
Mercedes-Benz Very stable welded posts
Volkswagen Group Without base frame Optional extras:
Two motors
Cold-rolled spindle Available with portal or in-ground kit
Nylon nut sets LED-lighting set
Carriage with 6 guiding wheels and Power pack
Set of expansion bolts
lubrication-free roller bearings Extra control unit
Pushbutton control unit with alarm signal Long door stops
Programmable top stop Wheel holders
Electronic synchronization Large program of extra pads

Arms: Special colours available
4 triple telescopic arms on request!
Internal arm locking system
Low minimum height

Standard colours:
Arms: RAL 3020 – red
Posts: RAL 7016 – grey