Autop Stenhoj Catalogue

101

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 6,500 kg Arm superstructure F: 11028 (90 – 150 mm)
Lifting capacity 1,900 mm
Lifting height 2,045 – 2,105 mm Lifting pad included 145 mm
Working height approx. 35 sec. in the delivery 2,829 mm
Lifting / lowering time 2 x 4 kW 3,170 mm
Motor 3 x 230 / 400V – 50 Hz – 35 / 25 A Min. height
Voltage Drive-through width 3,560 mm
Width between posts
4,000 mm
Total width -
outer edges posts 2,908 mm
4,910 – 5,270 mm
Total width - 770 – 1,640 mm
outer edges base plates 770 – 1,640 mm

Total height post

Total height incl. portal
Arm length front, min. - max.
Arm length rear, min. - max.

Triple telescopic arms with F-pad Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
Stable, welded post
Carriage with rollers

102 SURFACE-MOUNTED LIF TS

Magnat 35

Electro-hydraulic 2-post lift, 3.5 t capacity

Application Description: Versions:

Repair and maintenance Posts: Available with different voltages
Vehicle rear positioning for optimum BMW- and Universal armset available
Approvals / recommendations FD BMW
door opening angle FD Uni
BMW Very stable bent posts
Volkswagen Group Without base frame Optional extras:
Volvo One hydraulic unit
Carriage with slide blocks Set of expansion bolts
Pushbutton control unit with alarm signal A large program of lifting pads
Portal can during installation be
stop and upper protection list fitted in 2 different heights
Mechanic synchronization Adaptor for AUTOPSTENHOJ
Safety ratchet system no expensive compressed pads

air required Special colours available on
Post is height adjustable during installation request!

Arms:
Double telescopic front and rear arms, as standard
Possibility of parallel parking of arms
Automatic arm locking system
Low minimum height
Suitable for the smallest passenger cars ip to T6 long
Parallel-parking of arms eases positioning

Standard colours:
Arms: RAL 3020 – red
Posts: RAL 7016 – grey

103

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 3,500 kg Arm superstructure F: 95 – 140 mm
Lifting capacity 1,800 mm Lifting pad included
Lifting height 1,940 mm in the delivery 95 mm
Working height Min. height
Lifting / lowering time 30 sec. Drive-through width BMW: 2,250 mm
Pump unit 2.2 kW Uni: 2,450 mm
Voltage 3x230 / 400 V-50 / 60Hz – 16 A Width between posts
BMW: 2,560 mm
Total width - Uni: 2,760 mm
outer edges base plates
Total height incl. portal BMW: 3,245 mm
Arm length front, min. - max. Uni: 3,495 mm

Arm length rear, min. - max. 4.009 mm + 250 mm

F BMW: 590 – 995 mm
F Uni: 640 – 1,145 mm

F BMW: 710 – 1,275 mm
F Uni: 880 – 1,560 mm

FD-pad Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
Low arm construction <100mm
Arm locking system and door protection

104 SURFACE-MOUNTED LIF TS

Magnat 40

Electro-hydraulic 2-post lift, 4 t capacity

Application Description: Versions:

Repair and maintenance Posts: Available with different voltages
Vehicle rear positioning for optimum BMW- and Universal armset available
Approvals / recommendations FD BMW
door opening angle FD Uni
BMW Very stable bent posts
Volkswagen Group Without base frame Optional extras:
Volvo One hydraulic unit
Carriage with slide blocks Set of expansion bolts
Pushbutton control unit with alarm signal A large program of lifting pads
Portal can during installation be
stop and upper protection list fitted in 2 different heights
Mechanic synchronization Adaptor for AUTOPSTENHOJ
Safety ratchet system no expensive compressed pads

air required Special colours available on
Post is height adjustable during installation request!

Arms:
Double telescopic front and rear arms, as standard
Possibility of parallel parking of arms
Automatic arm locking system
Low minimum height
Suitable for the smallest passenger cars ip to T6 long
Parallel-parking of arms eases positioning

Standard colours:
Arms: RAL 3020 – red
Posts: RAL 7016 – grey

105

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 4,000 kg Arm superstructure F: 95 – 140 mm
Lifting capacity 1,800 mm
Lifting height 1,940 mm Lifting pad included 95 mm
Working height in the delivery Uni: 2,450 mm
Lifting / lowering time 30 sec. Uni: 2,760 mm
Pump unit 2.2 kW Min. height
Voltage 3x230 / 400 V-50 / 60Hz – 16 A Drive-through width Uni: 3,495 mm
Width between posts
4,009 mm + 250 mm
Total width - F Uni: 640 – 1,145 mm
outer edges base plates F Uni: 880 – 1,560 mm

Total height incl. portal
Arm length front, min. - max.
Arm length rear, min. - max.

FD-pad Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
Lorwemarmipscuomnsvtorulucntitoans <100mm
TArramglaorcmkinvgersryiesgteemluanngd door protection

106 SURFACE-MOUNTED LIF TS

Major 4026

Electro-hydraulic 4-post lift, 4 t capacity

Application Description: S = flush platforms
W = with front recesses
Check-in Posts: for turn tables and rear side
Repair and maintenance Integrated eccentric brake system slip plates
Wheel alignment Emergency stop valve G = galvanized platforms
MOT Testing Obstruction system 42 = 4,200 mm platforms
Pneumatic parking system in height 47 = 4,700 mm platforms
Approvals / recommendations 51 = 5,100 mm platforms
adjustable ratchets
Major 4026-47 S: Pump and control unit on rear left post Optional extras:
Volvo Pushbutton control unit with alarm signal
Hydraulic cylinder under left platform Set of expansion bolts
Major 4026-47 W: Lifting and lowering by means of cables Extra control unit
Volvo Emergency lowering valve LED-lighting set
Set of two cover plates for
Platforms: recesses
Fixated platforms as standard Set of two 385 mm ramp
Platforms prepared for AUTOPSTENHOJ scissor jack extensions
Set of two platform extensions
Standard colours: (0.5 m)
Platforms & posts: RAL 7016 – grey
Ramps: RAL 3020 – red Special colours available on
request!
Versions:

Available with different voltages
Drive-on ramps and stops for surface-
mounting, alternatively drive-over ramps
for recessed installation

107

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 4,000 kg Platforms 5,060 / 5,560 mm
Lifting capacity 1,670 mm Total length 4,180 / 4,680 mm
Lifting height 1,810 mm Usable length of platform
Working height Wheel base, min. - max. variable
Standard: 24 / 26 sec. Platform width 500 mm
Lifting / lowering time D: 16 / 26 sec. Distance between platforms 740 – 1,030 mm
Min. height 140 / 160 mm
Pump unit Standard: 3 kW Width between posts 2,600 mm
D: 2 x 3 kW
Voltage Total width - outer edges 3,022 mm
3x230 / 400V – 50 Hz - 25 / 16 A base plates
2,233 mm
Total height

Also available as inspection lifts: Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
As standard equipped with re-inforced posts and larger
cable diameter for intensive usage in inspection centres.
As standard delivered with:
P = play detector (pneumatically operated for both lateral
and rotational movement, for axle load up to 3 t), operation
with wireless hand lamp

Option:
D = double pump unit for quicker lifting time. Control unit
on front left post

Ratchet for parking position

SCtoenutreorluunngit uand pAogwgerer gat
apancdkeornSräeualre lehifnt tpeonsltinks

Pulley with steel cable

108 SURFACE-MOUNTED LIF TS

Major 4030

Electro-hydraulic 4-post lift, 4 t capacity

Application Description: S = flush platforms
WL = with front recesses for turn
Check-in Posts: tables and rear side slip plates,
Repair and maintenance Integrated eccentric brake system center cover plate between
Wheel alignment Emergency stop valve recesses and side slip plates
MOT Testing Obstruction system G = galvanized platforms
Pneumatic parking system in height 42 = 4,200 mm platforms
Approvals / recommendations 47 = 4,700 mm platforms
adjustable ratchets 51 = 5,100 mm platforms
Jaguar Pump and control unit on rear left post
Landrover Pushbutton control unit with alarm signal Optional extras:
Renault Hydraulic cylinder under left platform
Volvo Lifting and lowering by means of cables Set of expansion bolts
Emergency lowering valve Extra control unit

Platforms: LED-lighting set
Fixated platforms as standard Set of two cover plates
Platforms prepared for AUTOPSTENHOJ scissor jack for recesses
Set of two 385 mm ramp
Standard colours: extensions
Platforms & posts: RAL 7016 – grey Set of two platform
Ramps: RAL 3020 – red extensions (0.5 m)

Versions: Special colours available on
request!
Available with different voltages
Drive-on ramps and stops for surface-
mounting, alternatively drive-over ramps
for recessed installation

109

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 4,000 kg Platforms 5,560 / 5,980 mm
Lifting capacity 1,830 mm Total length 4,680 / 5,100 mm
Lifting height 1,810 mm Usable length of platform
Working height Wheel base, min. - max. variable
Standard: 24 / 26 sec. Platform width 550 mm
Lifting / lowering time D: 16 / 26 sec. Distance between platforms 805 – 1,285 mm
Min. height 140 / 160 mm
Pump unit Standard: 3 kW Width between posts 3,000 mm
D: 2 x 3 kW
Voltage Total width - 3,422 mm
3x230 / 400V – 50 Hz – 25 / 16 A outer edges base plates
2,233 mm
Total height

Also available as inspection lifts: Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
As standard equipped with re-inforced posts and larger
cable diameter for intensive usage in inspection centres.
As standard delivered with:
P = play detector (pneumatically operated for both lateral
and rotational movement, for axle load up to 3 t), operation
with wireless hand lamp

Option:
D = double pump unit for quicker lifting time. Control unit
on front left post

RKlaintckheeftürfoPraprakrpkoinsgitiopnosition

Control unit and power
pack on rear left post

Pulley with steel cable

110 SURFACE-MOUNTED LIF TS

Major 4030-44 WL DLX

Electro-hydraulic 4-post lift, 4 t capacity

Application Description: WL = with front and rear
recesses for turn tables. Side
Check-in Posts: slip plates available as optional
Repair and maintenance Integrated eccentric brake system extra.
Wheel alignment Emergency stop valve
MOT Testing Obstruction system 44 = 4,400 mm platforms
Pneumatic parking system in height
Approvals / recommendations Optional extras:
adjustable ratchets
BMW/Mini Pump and control unit on rear left post Set of expansion bolts
Pushbutton control unit with alarm signal Extra control unit
Hydraulic cylinder under left platform LED-lighting set
Lifting and lowering by means of cables Set of two cover plates
Emergency lowering valve for recesses
Set of two 385 mm ramp
Platforms: extensions
Fixed platforms as standard
Platforms prepared for AUTOPSTENHOJ scissor jack Special colours available on
Platforms on stable cross beam request!

Standard colours:
Platforms & posts: RAL 7016 – grey
Ramps: RAL 3020 – red

Versions:

Available with different voltages
Drive-on ramps and stops for surface-mounting,
alternatively drive-over ramps for recessed
installation

111

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 4,000 kg Platforms 4,840 mm
Lifting capacity 1,670 mm Total length 4,400 mm
Lifting height 1,860 mm Usable length of platform
Working height Wheel base, min. - max. variable
Lifting / lowering time 35 sec. Platform width 680 mm
Pump unit 3 kW Distance between platforms 930 mm
Voltage Min. height 190 mm
3x230 / 400V – 50 Hz – 25 / 16 A Width between posts 3,000 mm

Total width - 3,432 mm
outer edges base plates
2,233 mm
Total height

Slip plate Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.

KRlaintckheeftürfoPraprakrpkoinsgitiopnosition

Control unit and power
pack on rear left post

112 SURFACE-MOUNTED LIF TS

Major 5030–53 W Combi

Electro-hydraulic 4-post lift, 5 t capacity with integrated free-wheel lift

Application Description: Versions:

Check-in Post: Available with different voltages
Repair and maintenance Integrated eccentric brake system Drive-on ramps and stops for
Wheel alignment Emergency stop valve surface-mounting, alternatively
MOT Testing Obstruction system drive-over ramps for recessed
Pneumatic parking system in height installation
W = with front recesses for turn
adjustable ratchets tables and rear side slip plates
Pump and control unit on rear left post 53 = 5,300 mm platforms
Pushbutton control unit with alarm signal
Hydraulic cylinder under left platform Optional extras:
Lifting and lowering by means of cables
Emergency lowering valve Set of expansion bolts
LED-lighting set
Platforms:
Fixated platforms as standard Special colours available on
Free-wheel lift integrated in platforms request!

Standard colours:
Platforms & posts: RAL 7016 – grey
Ramps: RAL 3020 – red

113

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 5,000 kg Platforms 6,810 mm
Lifting capacity 1,670 mm Total length 5,290 mm
Lifting height 1,878 mm Usable length of platform
Working height approx. 33 / 24 sec. Wheel base, min. - max. variable
Lifting / lowering time Platform width 560 mm
Pump unit 3 kW Distance between platforms 935 – 985 mm
Voltage 3x230 / 400V – 50 Hz – 25 / 16 A Min. height 200 / 208 mm
Width between posts 3,000 mm
Free-wheel lift 3,500 kg
Lifting capacity 425 mm Total width - 3,432 mm
Height outer edges base plates
Min. height (mm) 0 2,233 mm
Length min. - max. 1,450 - 2,200 mm Total height
Lifting / lowering time
Operation hydraulic
9/12 sec.

RKlaintckheeftürfoPraprakrpkoinsgitiopnosition Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.

Control unit and power
pack on rear left post

PSpuellezyifiwscithhesteZeubl ceahbölre: MKS-Adapter

114 SURFACE-MOUNTED LIF TS

Major 5230

Electro-hydraulic 4-post lift, 5.2 t capacity

Application Description: S = flush platforms
WL = with front recesses for turn
Check-in Posts: tables and rear side slip plates,
Repair and maintenance Integrated eccentric brake system center cover plate between
Wheel alignment Emergency stop valve recesses and side slip plates
MOT Testing Obstruction system G = galvanized platforms
Pneumatic parking system in height 42 = 4,200 mm platforms
Approvals / recommendations 47 = 4,700 mm platforms
adjustable ratchets 51 = 5,100 mm platforms
Renault Pump and control unit on rear left post 55 = 5,500 mm platforms
Pushbutton control unit with alarm signal
Hydraulic cylinder under left platform Optional extras:
Lifting and lowering by means of cables
Emergency lowering valve Set of expansion bolts
Extra control unit
Platforms: LED-lighting set
One movable platform as standard Set of two cover plates for
Platforms prepared for AUTOPSTENHOJ scissor jack recesses
Set of two 385 mm ramp
Standard colours: extensions
Platforms & posts: RAL 7016 – grey Set of two platform extensions
Ramps: RAL 3020 – red (0.5 m)

Versions: Special colours available on
request!
Available with different voltages
Drive-on ramps and stops for surface-
mounting, alternatively drive-over ramps
for recessed installation

115

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 5,200 kg Platforms 5,560 / 5,980 / 6,780 mm
Lifting capacity 1,670 mm Total length 4,680 / 5,100 / 5,500 mm
Lifting height 1,860 mm Usable length of platform
Working height Wheel base, min. - max. variable
Standard: 32 / 26 sec. Platform width 630 mm
Lifting / lowering time D: 16 / 26 sec. Distance between platforms 725 - 1,210 mm
Min. height 140 / 170 / 160 / 190 mm
Pump unit Standard: 3 kW Width between posts 3,000 mm
D: 2 x 3 kW
Voltage Total width - 3,422 mm
3x230 / 400V – 50 Hz – 25 / 16 A outer edges base plates
2,233 mm
Total height

Also available as inspection lifts: Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
As standard equipped with re-inforced posts and larger
cable diameter for intensive usage in inspection centres.
As standard delivered with:
P = play detector (pneumatically operated for both lateral
and rotational movement, for axle load up to 3 t), operation
with wireless hand lamp

Option:
D = double pump unit for quicker lifting time. Control unit
on front left post

Pulley with steel cable

KRalintckheeftürfoPraprakrpkoinsgitiopnosition

Control unit and power
pack on rear left post

116 SURFACE-MOUNTED LIF TS

Major 6230

Electro-hydraulic 4-post lift, 6.2 t capacity

Application Description: Versions:
Check-in
Repair and maintenance Posts: Available with different voltages
Integrated eccentric brake system Drive-on ramps and stops for
Approvals / recommendations Emergency stop valve surface-mounting, alternatively
Renault Obstruction system drive-over ramps for recessed
Pneumatic parking system in height installation
S = flush platforms
adjustable ratchets G = galvanized platforms
Pump and control unit on rear left post 55 = 5,500 mm platforms
Pushbutton control unit with alarm signal 60 = 6,000 mm platforms
Hydraulic cylinder under left platform
Lifting and lowering by means of cables Optional extras:
Emergency lowering valve
Set of expansion bolts
Platforms: Extra control unit
One movable platform as standard LED-lighting set
Platforms prepared for AUTOPSTENHOJ scissor jack Set of two 385 mm ramp
extensions
Standard colours: Set of two platform extensions
Platforms & posts: RAL 7016 – grey (0.5 m)
Ramps: RAL 3020 – red
Special colours available on
request!

117

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 6,200 kg Platforms 6,780 / 7,280 mm
Lifting capacity 1,670 mm Total length 5,500 / 6,000 mm
Lifting height 1,840 mm Usable length of platform
Working height approx. 48 / 58 sec. Wheel base, min. - max. variable
Lifting / lowering time Platform width 630 mm
Pump unit 3 kW Distance between platforms 725 – 1,210 mm
Voltage 3x230 / 400V – 50 Hz – 25 / 16 A Min. height 170 mm
Width between posts 3,000 mm

Total width - 3,432 mm
outer edges base plates
2,235 mm
Total height

KRlaintckheeftürfoPraprakrpkoinsgitiopnosition Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.

Control unit and power
pack on rear left post

Pulley with steel cable

118 SURFACE-MOUNTED LIF TS

Major 7230

Electro-hydraulic 4-post lift, 7.2 t capacity

Application Description: Versions:
Direktannahm e
Repair and maintenance Post: Available with different voltages
Integrated eccentric brake system Drive-on ramps and stops for
Approvals / recommendations Emergency stop valve surface-mounting, alternatively
Renault Obstruction system drive-over ramps for recessed
Pneumatic parking system in height installation
S = flush platforms
adjustable ratchets G = galvanized platforms
Pump and control unit on rear left post
Pushbutton control unit with alarm signal Optional extras:
Hydraulic cylinder under left platform
Lifting and lowering by means of cables Set of expansion bolts
Emergency lowering valve Extra control unit
LED-lighting set
Platforms: Set of two 385 mm ramp
One movable platform as standard extensions
Platforms prepared for AUTOPSTENHOJ scissor jack Set of two platform
extensions (0.5 m)
Standard colours:
Platforms & posts: RAL 7016 – grey Special colours available
Ramps: RAL 3020 – red on request!

119

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 7,200 kg Platforms 7,280 mm
Lifting capacity 1,670 mm Total length 6,000 mm
Lifting height 1,840 mm Usable length of platform
Working height approx. 40 / 58 sec. Wheel base, min. - max. variable
Lifting / lowering time Platform width 630 mm
Pump unit 3 kW Distance between platforms 725 – 1,210 mm
Voltage 3x230 / 400V – 50 Hz – 25 / 16 A Min. height 170 mm
Width between posts 3,000 mm

Total width - 3,432 mm
outer edges base plates
2,235 mm
Total height

KRlaintckheeftürfoPraprakrpkoinsgitiopnosition Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.

Control unit and power
pack on rear left post

Pulley with steel cable

120 SURFACE-MOUNTED LIF TS

Major 4000 – 6000 MOT / ATL

Electro-hydraulic 4-post lift with 4.0, 4.8, 5.2 & 6.5 t capacity

Application Description: MOT Lifts:
Worldwide accepted inspection
Check-in Integrated eccentric brake system lifts which have been specified and
Repair and maintenance Emergency stop valve constructed according to UK MOT
MOT Testing Obstruction system requirements. MOT lifts are as stan-
Pneumatic parking system in height adjustable ratchets dard delivered with front recesses
Pump and control unit on rear left post; delivered with with turntables and extra control
extra control unit for front right post unit for operation from front right
Pushbutton control unit with alarm signal post. Drive-on ramps and stops
Hydraulic cylinder under left platform for surface-mounting, alternatively
Lifting and lowering by means of cables drive-over ramps for recessed
Emergency lowering valve installation.
Both platforms fixed
Platforms prepared for AUTOPSTENHOJ scissor jack ATL Lifts:
Worldwide accepted inspection
Standard colours: lifts which have been specified and
Platforms & Posts: RAL 7016 – grey constructed according to UK MOT
Ramps: RAL 3020 – red and ATL (automated test lanes
VOSA) requirements. ATL lifts are
Versions: as standard delivered with front
recesses with turntables and extra
Available with different voltages control unit for operation from front
Available with different platform lengths right post; ATL lifts are furthermore
equipped with re-inforced posts
Special colours available and larger cable diameter and a
on request! play detector (pneumatically ope-
rated for both lateral and rotational
movement, for axle load up to 3
t), operation with wireless hand
lamp. Drive-on ramps and stops
for surface-mounting, alternatively
drive-over ramps for recessed
installation
WL = with front recesses for turn
tables and rear side slip plates,
center cover plate between recesses
and side slip plates

121

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 6,500 kg Optional extras:
Lifting capacity, bis 1,670 mm
Lifting height 1,810 – 1,840 mm Set expansion bolts
Working height LED-lighting set
32 / 26 sec. Set of two cover plates for
Lifting / lowering time (40/58 sec. - Major 6530-60) recesses
Set of two 385 mm ramp
Pump unit 3 kW extensions
Voltage 400 / 3 / 50 – 240 / 1 / 50 Set of two platform extensions
(0.5 m)
* Dimension sketches to be found on our website. Set of two cover plates

Play detector

Turn table Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.

Wireless hand lamp for play detector

KRlaintckheeftürfoPraprakrpkoinsgitiopnosition

122 SURFACE-MOUNTED LIF TS

Micro 20 & 26 & 40 air-hydraulic

Air-hydraulic scissor jack with 2 / 2.6 / 4 t capacity

Application Description: Versions:

For use on Major Micro 20 & 26: Micro 20 = 2,000 kg & 1,600 mm
platform lifts Double-acting cylinder extension
2-hand operation
Approvals / recommendations Mechanical parking system Micro 26 = 2,600 kg & 1,460 mm
Non-return valve extension
Micro 20 & 26: Retaining device
BMW / Mini Double arm extension Special version Micro 26 =
Galvanized arms 2,600 kg & 1,600 mm extension

Micro 40: Micro 40 = 4,000 kg & 1,500 mm
2-hand operation extension
Deadman control
Pressure relief valve Delivery includes a variety of
Retaining device pads
Double arm extension
Optional extras:
Standard colours:
RAL 3020 – red Air connection kits
A large program of extra pads

Special colours available on
request!

123

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 2,000 / 2,600 / 4,000 kg
Lifting capacity 250 / 300 mm
Lifting height 75 mm
Min. height
Lifting / lowering time 27 / 5 / 23 / 5 / 115 / 5 sec.
Operation air-hydraulic
Pressure min. - max.
5.5/8 / 8.5/12 bar
Extension
792 – 1,600 mm / 792 – 1,460 mm /
780 – 1,500 mm

Air-hydraulic Micro 26 on BL 2.65 F550 Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
GAier-lheyndkrsapuliiecltMeisctreor26 on PL 2.40 F
We offer a large program
KoflinekxetraApbasdestzfloeristthee Micro jacks

124 SURFACE-MOUNTED LIF TS

Micro 20 & 26 LH automatic

Full-automatic, air-hydraulic scissor jack with 2 & 2.6 capacity

Application Description: Versions:

For use on Major Joystick control Micro 20 = 2,000 kg
platform lifts Remote control Micro 26 = 2,600 kg
Mechanical parking system
Approvals / recommendations Retaining device Optional extras:
Double arm extension
Micro 20 & 26: Air connection kits
BMW / Mini Standard colours: A large program of extra pads
RAL 3020 – red
Special colours available on
request!

125

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 2,000 / 2,600 kg
Lifting capacity 250 mm
Lifting height 75 mm
Min. height 37/3 sec.
Lifting / lowering time
Operation air-hydraulic
Pressure min. - max. 8.5/12 bar
Extension
780 – 1,500 mm

Extension and suspension Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
oDnreahMtealjloerr4S-pcoissstolifrt jack

We offer a large program
Gofeelextnrkasppaiedsltefosrtethre Micro jacks

FKiltitnekdeoAnbaseMtzaljeoirs4te-post lift

126 SURFACE-MOUNTED LIF TS

Micro 20 & 26 full-hydraulic

Full-hydraulic scissor jacks with 2 & 2.6 capacity

Application Description: Versions:

For use on Major Operates on the Major lift pump Micro 20 = 2,000 kg & 1,600 mm
platform lifts 2-hand operation extension
Mechanical parking system
Non-return valve Micro 26 = 2,600 kg &
Double arm extension 1,460 mm extension
Galvanized arms
Special version Micro 26 =
Standard colours: 2,600 kg & 1,600 mm extension
RAL 3020 – red
Delivery includes a variety of
pads

Optional extras:

Hydraulic connection kits
A large program of extra pads

Special colours available on
request!

127

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 2,000 / 2,600 kg
Lifting capacity 250 mm
Lifting height 75 mm
Min. height 5 / 15 sec.
Lifting / lowering time
Operation full-hydraulic
Pressure 230 bar

Extension Micro 26: 792 - 1,460 mm
Micro 20: 792 - 1,600 mm

We offer a large program Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
Moficerxotraacpcaedsssoforiretshe Micro jacks
Micro Full hydraulic

128 SURFACE-MOUNTED LIF TS

MagiX 30 LS

Electro-hydraulic tyre lift, 3 t capacity

Application Description: Versions:
Repair and maintenance
Double master / slave system Available with different voltages
Approvals / recommendations Control stand with integrated pump For surface-mounting or
Renault unit and alarm signal recession
Electronic synchronization L = low
Emergency lowering valve S = superstructure on floor
Sturdy scissor construction I = superstructure in floor
No mechanical connection between G = galvanized platforms and
scissor sections base frame
Optimum access to vehicle
Low minimum height Optional extras:

Standard colours: LED-lighting set for
Platforms & scissor: RAL 7016 – grey surface-mounted versions
Ramps: RAL 3020 – red
Set of expansion bolts
Set rubber blocks,
40, 60, 70, 80 and 100 mm

Special colours available on
request!

129

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 3,000 kg Scissor platforms 1,450 – 2,030 mm
Lifting capacity 1,845 mm Platform length 600 mm
Lifting height Platform width 660 mm
960 mm Distance between platforms 105 mm
Working height + Rubber pads Min. height 0 mm
Depth of recess
Lifting / lowering time 17 / 22 sec.
Pump unit 2.2 kW
Voltage
3x230 / 400V – 50 Hz

Available with galvanized base frame Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
Self-lubricating bearing

130 SURFACE-MOUNTED LIF TS

MagiX 30

Electro-hydraulic scissor lift, 3 t capacity

Application Description: Versions:

Check-in Double master / slave system Available with different voltages
Repair and maintenance Control stand with integrated pump For surface-mounting or recession
unit and alarm signal S = superstructure on floor
Approvals / recommendations Electronic synchronization I = superstructure in floor
Emergency lowering valve G = galvanized upper plates and
Renault Sturdy scissor construction base frame
Volvo No mechanical connection between
scissor sections Optional extras:
Optimum access to vehicle
Low minimum height LED-lighting set for
surface-mounted versions
Standard colours:
Platforms & scissor: RAL 7016 – grey Set of expansion bolts
Ramps: RAL 3020 – red Set rubber blocks,
40, 60, 70, 80 and 100 mm

Special colours available on
request!

131

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

670 670 720 720

Technical data Scissor platforms
Lifting capacity
Lifting height 3,000 kg Platform length 1,490 – 2,040 mm
670 mm
300 300 1,845 mm 670 720 Platform width 720 mm
105 mm
Working20h4e0igh20t40 450 450 S: 1,950 mm Distance between platforms
I: 1,845 mm S: 0 mm
275 275 1490 1490 + Rubber pads 670 Min7.2h0eight 670 670 720 720 I: 105 mm

Lifting /2l0o4w0 ering time 450 45 (40) sec. Depth of recess

1000 2.2 kW 670 720
1000 3x230 / 400V – 50 Hz 300 300 670 720
275 Pum3p0u01n4i9t0 2040 Max. 1950 Max. 1950 Max. 1950 450 450

V27o5ltage 1490

300 450 1000
1000
1000 Min 200M0in 2000 300 450
1000 Max. 1950
605 605 785 785
300 450

1000 605 605 785 785
1000

1000 Min 2000 605 785 Min. 105 Min. 105 Min. 105605 785Min. 105 Min. 105 Min. 105
1000 Min 2000 605 785 605 785

1000 Min. 105 Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
1000

Min. 105

Recessed installation

2040 2040
1490 1490
275 275 670 670 720 720

Available with galvanized base frame
670 670 720 720 670 720

275 2040 Max. 19105000 Max. 1950 Max. 1950 450 450 670 720 300 450 450
275 1490 670 720
Max. 1950 Max. 1950 Max. 1950 300 300 300
2040
1490 670 720

1000 1000 450
1000
300 450 300
300
Max. 1950 Max. 1950 450 450
1000
300 605 605 785
Self-lubricating bearing
605 605 785 785
1000 785
Min 200M0in 2000 1000
Min 2000 1000 Min 200M0in 2000
n. 105
605 n. 105785

00 605 785

132 SURFACE-MOUNTED LIF TS

MagstiXer3li5ft 2.35 Pv

EElleekcttrrooh-yhdyrdarualiusclichesc2i-sSstoemr lpifte,l 3H.e5btecbaüphnaec,it3y,5 t mit Flachträgerlastaufnahme

Application Description: Versions:
Check-in
Repair and maintenance Double master / slave system Available with different voltages
Control stand with integrated pump For surface-mounting or recession
Approvals / recommendations unit and alarm signal S = superstructure on floor
Volkswagen Group Electronic synchronization I = superstructure in floor
Emergency lowering valve G = galvanized upper plates and
Sturdy scissor construction base frame
No mechanical connection between
scissor sections Optional extras:
Optimum access to vehicle
Low minimum height LED-lighting set for
surface-mounted versions
Standard colours:
Platforms & scissor: RAL 7016 – grey Set of expansion bolts
Ramps: RAL 3020 – red Set rubber blocks,
40, 60, 70, 80 and 100 mm

Special colours available on
request!

133

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 3,500 kg Scissor platforms S: 1,560 – 2,100 mm
Lifting capacity 1,775 mm Platform length I: 1,526 – 2,001 mm
Lifting height Platform width
S: 1.880 mm Distance between platforms 630 mm
Working height I: 1.770 mm Min. height
+ Rubber pads 800 mm
Lifting / lowering time Depth of recess
Pump unit 44/44 sec. S: 105 mm
Voltage 3 kW I: 0 mm

3x230/400V – 50 Hz S. 0 mm
I: 110 mm

Available with galvanized base frame Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
Self-lubricating bearing

134 SURFACE-MOUNTED LIF TS

MagiX 45

Electro-hydraulic scissor lift with platforms, 4.5 t capacity

Application Description: Versions:

Check-in Double master / slave system Available with different voltages
Repair and maintenance Control stand with integrated pump We recommend surface-
Wheel alignment unit and alarm signal mounted installation
Electronic synchronization S = flush platforms, incl. guiding
Approvals / recommendations Emergency lowering valve edges for scissor jack
Sturdy scissor construction WL = with front recesses for turn
Renault No mechanical connection between tables and rear side slip plates,
MS 45 S-45 & scissor sections incl. guiding edges for scissor
MS 45 WL-45: Volvo Optimum access to vehicle jack
Low minimum height Combi = platforms with
integrated free-wheel lift
Standard colours: Also available with galvanized
Plattforms: RAL 7016 - grey base frame and platforms
Ramps: RAL 3020 – red 45 = 4,500 mm platforms
48 = 4,800 mm platforms
52 = 5,200 mm platforms
Incl. drive-on ramps, stops and
LED-lighting set

Optional extras:

Set of expansion bolts
Set rubber blocks, 40, 60, 70, 80
and 100 mm
Guiding edges for scissor jack for
Combi-versions
Play detector

Special colours available on
request!

135

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 4,500 kg Scissor platforms 4,500 / 4,800 / 5,200 mm
Lifting capacity 1,900 mm (surface-mounted) Platform length 660 mm
Lifting height Platform width
Working height 1,870 mm Distance between platforms 875 - 1,000 mm
Lifting / lowering time 55 sec. Min. height 230 mm
Pump unit Depth of recess 0 mm
Voltage 4 kW
3x230 / 400V – 50 Hz

Free-wheel lift

Lifting capacity 4,000 kg

Lifting height 400 mm

Min. height 0 mm

Lifting / lowering time 7 / 15 sec.

Operation hydraulic

Necessary air pressure 6 bar

Length 1,450 – 1,965 mm

Brochure-sketch for MagiX 45 WL Combi -52



Control stand Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.

Adjustable base frame

Infra-red sensor and fillers

136 SURFACE-MOUNTED LIF TS

MagiX 50

Electro-hydraulic scissor lift with platforms, 5 t capacity

Application Description: Combi = platforms with
integrated free-wheel lift
Check-in Double master / slave system
Repair and maintenance Control stand with integrated pump Also available with galvanized
Wheel alignment unit and alarm signal base frame and platforms
Electronic synchronization
Approvals / recommendations Emergency lowering valve 45 = 4,500 mm Platforms
Sturdy scissor construction 48 = 4,800 mm Platforms
Renault No mechanical connection between 52 = 5,200 mm Platforms
scissor sections Incl. drive-over ramps, stops
Optimum access to vehicle and LED-lighting set
Low minimum height
Optional extras:
Standard colours:
Platforms and scissors: RAL 7016 – grey Set of expansion bolts
Ramps: RAL 3020 – red Set rubber blocks, 40, 60, 70, 80
and 100 mm
Versions: Guiding edges for scissor jack for
Combi-versions
Available with different voltages Play detector
We recommend recession in floor
S = superstructure on floor Special colours available on
I = I = superstructure in floor request!
W = with front recesses for turn tables and
rear side slip plates, incl. guiding edges for
scissor jack

137

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 5,000 kg Scissor platforms 4,500 / 4,800 / 5,200 mm
Lifting capacity 1,810 mm Platform length 660 mm
Lifting height 1,810 mm Platform width
Working height Distance between platforms 800 – 1,000 mm
Lifting / lowering time 55 sec. Min. height 0 mm
Pump unit 4 kW Depth of recess
Voltage 340 mm
3x230 / 400V – 50 Hz
Free-wheel lift
Lifting capacity 4,000 kg
Lifting height 400 mm
Min. height
Lifting / lowering time 0 mm
Operation 7 / 15 sec.
Necessary air pressure hydraulic
Length
6 bar
1,450 – 1,965 mm

CBeodniteronlssätualend Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
EAidnjsutsetlalbbalerebraGsreufnrdarmaehmen
Infrar-oretsdesnesnosror and fillers

138 ACCESSORIES

Safe lifting at the
highest level.

AUTOPSTENHOJ offers lifts for all kinds of vehicles, and with the extensive range of optional extras such as pads,
rubber blocks and wheel supports we offer a unique, safe and professional solution just for your requirement.

AUTOPSTENHOJ pads offer flexibility. Rubber pads for all vehicles.

A wide range of extra pads that enable lifting of Offers full protection of underbody, when lifting
vehicles with even very difficult lifting points on the recommended lifting points

Pads for both inground and surface-mounted lifts Various designs and sizes available
Fixed as well as adjustable pads in many different heights

139 Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.

Wheel supports – experience the advantages!
Easy access to underbody of vehicle
Ideal as lift can be used for different applications
Standard distance between supports: 400 mm
Offroad distance between supports: 500 mm
Lifting capacity: 875 kg (per wheel support)

Exclusive advantages with exclusive lifts.
The wheel supports are for usage on inground lifts with arms as well as the surface-
mounted Maestro 2.50, Maestro 2.55, Maestro 2.65 and Maestro 2.35 F Sport, and
should only be used on those lifts.

140 ACCESSORIES

Power supply
at its best!

Is multi-tasking possible? Yes, in fact it is by using power discs or power modules from AUTOPSTENHOJ; as well as our
smart power & control column. It makes sense to choose a strong product, as no matter which solution you choose, our
products are adapted to local conditions and individual demands to a safe and efficient working area.

Power discs:
So many possible connections cover also all future requirements

Ceiling or wall installation – no obstacles.
Power and air supply directly to your work bay – no tripping in cables.
Network connection possible (option).
Delivery is inclusive of chain suspension.
Different adaptors for fitting on e.g. a 2-post lift available.

Power modules:
Green light in all respects

Ceiling installation with protective yoke – safe and always within reach.
Power and air supply directly to your work bay – no tripping in cables.
Practical spring suspension for quick access.
Network connection possible (option).
We offer a large program of optional extras, e.g. protective yokes,
hooks and hand lamp cables.

Power and control columns:
Standard sizes offer flexibility

Different plugs (e.g. Schuko or Cekon) as well as air outlets available.
The possibility of integrating the control unit of a lift in the column.
Network connection possible (option).
Safety quick coupling.
Practical storage possibilities.

141

Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.

142 ACCESSORIES

Jet Cleaner RC 82 / 122

Parts cleaning machines

Approvals / recommendations Description: Versions:
Opel
Parts cleaning machines made of stainless steel for RC 82 with 790 mm usable
economical and ecological parts cleaning, degreasing basket diameter
on water basis using spray nozzels.
RC 122 with 1190 mm usable
Compact and sturdy design basket diameter
Made of stainless steel
Simple handling Optional extras:
Space saving
3D-blast pipe system incl. flat fan nozzles Heating timer
Low-water level alarm Oil skimmer
Safety limit switch on cover Economy insulation
Detergents & small parts baskets
Tub cover: Service counter
Track rollers + fixed rollers
Special colours available
on request!

143

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical Data RC 82 RC 122
790 mm 1.190 mm
Usable basket diameter 500 mm 500 mm
Usable height 930 mm 830 mm
Loading height 300 kg
Max. basket load 500 kg
Liquid volume 150 l 370 l
Pump ratio 200 l / min 280 l / min
Pump pressure 5 bar
Voltage 3 bar 230 / 400 V - 50 Hz - 24 A
Pump motor rating 230 / 400 V - 50 Hz - 14 A 4 kW
Heating 9 + 6 kW
Basket drive 1.5 kW E-Motor 0.09 kW
Total height 6 kW approx. 1,300 mm
Total width Jet of water approx. 1,650 mm
Total depth approx. 1,200 mm approx. 1,500 mm
Total weight approx. 1,300 mm approx. 350 kg
approx. 1,300 mm
approx. 220 kg

Before cleaning Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.
After cleaning

144 HEAV Y DUT Y LIF TS

HOW TO MAKE HARD
WORK EASY.

Did you know ...

… that an African bull elephant
in average has a shoulder height of
3.2 m and weighs approximately 5 t?
In theory, the AUTOPSTENHOJ
Multiflex 450 lift could lift up to 8 of
these impressive animals in one go.
We shall, however, leave the elephants
where they belong – on the African
savannahs.

145

Heavy duty lifts

- Maxi 100 .................................................................................................................... 146
- Maxi 160 / 200 / 240 .............................................................................................. 148
- Micro 60 – 140 ......................................................................................................... 150
- Mobile 75 H + H WB................................................................................................. 152
- Mobile 75 S ............................................................................................................... 154
- Multiflex 230, 300, 345 & 450............................................................................... 156
- Macro 100 / 150 / 200 ............................................................................................ 158

The safe lifting of a commercial vehicle up to 45 tons is not only a question of
the capacity of a lift, but also of the right overall technology. Whether lifting a
transporter or a heavy duty 45 t truck, each of our lifts follows a sophisticated
concept that takes account not only of load but also of other
essential issues, most important of which is safety.
For AUTOPSTENHOJ safety and quality are our primary focuses. This is also an
important point for heavy vehicles to make it as easy as possible, for example the
control panel is placed in an ergonomic working height.

146 HEAV Y DUT Y LIF TS

Maxi 100

Electro-hydraulic 4-post lift, 10 t capacity

Application Description: Versions:
Repair and maintenance
Friction brake system in the event of Available with different voltages
cable failure 4,600 mm flush platforms,
7,000 mm flush platforms
Pneumatic parking system in height 1,260, 2,000 or 2,800 mm
adjustable ratchets drive-on ramps
Drive-on ramps and stops
Pump unit with immersed motor for surface-mounting;
Pump and control unit on front left post alternatively drive-over ramps
Pushbutton control unit with alarm signal for recessed installation
One movable platform as standard
Lifting and lowering by means of cables Optional extras:

Standard colours: Set of expansion bolts
Platforms & posts: RAL 7016 - grey Lighting set
Ramps: RAL 3020 - red Auxiliary jack
3rd platform

Special colours available
on request!

147

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 10,000 kg Platforms 210 mm
Lifting capacity 1,700 mm Min. height 2,054 / 2,364 / 2,773 mm
Lifting height 1,435 mm Drive-through width 2,800 / 3,120 / 3,520 mm
Stroke length Width between posts 3,490 / 3,810 / 4,210 mm
Lifting / lowering time 45 sec. Total width
Motor 3 kW Total height 2,354 mm
Operation Total length 5,900 / 6,400 / 8,300 / 8,800 mm
Voltage hydraulic Platform length
3x230 / 400V-50 Hz – 25 / 16 A Utilization area of platform 4,600 / 7,000 mm
Necessary air pressure Platform width variable
min. / max. 7/10 bar Distance between platforms
Wheel base 650 / 750 mm
525 / 775 – 720 / 1,060 – 1,000 / 1,240 mm

variable

Ratchet parking system Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.

Pump and control unit
on front left post

Auxiliary jack and lighting set

148 HEAV Y DUT Y LIF TS

Maxi 160, 200 & 240

Electro-mechanical 4-post lift, 16, 20 & 24 t capacity

Application Description: Versions:
Repair and maintenance
Obstruction system Available with different voltages
Each post equipped with a motor and elastic coupling Maxi 160 & 200:
Self-carrying spindles with carrying and 3,950 mm flush platforms
safety nuts 7,500 mm flush platforms
Pushbutton control unit with alarm signal 8,000 mm flush platforms
One movable platform as standard 8,500 mm flush platforms
9,000 mm flush platforms
Standard colours: Maxi 240:
Platforms & posts: RAL 7016 - grey 2 x 5,000 mm flush platforms
Ramps: RAL 3020 - red 1,260, 2,000 or 2,800 mm
drive-on ramps
Drive-on ramps and stops
for surface-mounting;
alternatively drive-over ramps
for recessed installation

Optional extras:

Auxiliary jack
Lighting set
Scissor jack
3rd platform

Special colours available
on request!

149

Scan the QR-Code
for detailed product information.
Further Information on
www.autopstenhoj.com

Technical data 16,000 / 20,000 / 24,000 kg Platforms 295 / 305 mm
Lifting capacity 1,850 mm Min. height 3,200 / 3,470 mm
Lifting height Drive-through width 3,200 / 3,470 mm
Stroke length 1,545 / 1,555 mm Width between posts
Lifting / lowering time 120 sec. Total width 3,920 / 4,190
Pump unit Total height 2,550 mm
Operation 4 x 2.2 /  6 x 2.2 kW Total length
mechanical Platform length 9,005 / 9,745 / 11,505 / 12,395 mm
Voltage Utilization area of platform 5,000 / 7,500 / 8,000 / 8,500 / 9,000 mm
3x230 / 400V-50 Hz – 35 / 45 A / Platform width
3x230 / 400V-50 Hz – 45 / 60 A Distance between platforms variable
Wheel base 700 mm
950 / 1,180 mm
variable

Illustrations are not binding and optional. Under reserve of dimensional, constructional and technical modifications! Validity 07/2017.

150 HEAV Y DUT Y LIF TS

Micro 60 – 140

Air-hydraulic auxialiary jack with 1 or 2 cylinders, with 6, 10, 12 & 14 t capacity

Application Description: Versions:

For usage on Transversely sliding cylinders 1 or 2 cylinders with adjustable
Maxi-platform lifts. Rapid and precie air-hydraulic unit bridge: 590-890 mm or
with highspeed approach control 850-1,150 mm
Control panel at ergonomical
working height 1-cylinders with 1 x 100 mm
Deadman control extension
Pressure relief valve
2-cylinders with 2 x 100 mm
Standard colours: extensions
RAL 3020 - red
RAL 7016 - grey Optional extras:

Air connection kits
Traverse
Auxiliary bridge

Special colours available
on request!