GAL Catalog Priceless

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT

Interlock Isometric Drawing

TYPE: “VR”

Manual Vertical Rising Doors

Interlock
Assemblies

Part No. Item No Description Part No. Item No Description

INT13-0002L/R 1 Switch Assembly, VR Interlock INT13-0005L/R 3 Locking Bolt Assembly, VR Interlock
INT13-0004N (Page# 387) INT13-0012N (Page# 374)
INT13-0007N 1A Cover, VR Interlock Assembly (Page# 379) INT13-0009L/R 4 Link, VR Interlock Connecting (Page# 374)
INT13-0008N Contact, VR Interlock Bridging Assembly INT13-0011L/R 5 Latch Assembly, VR Interlock (Page# 374)
INT13-0006L/R 1B (Page# 376) INT13-0010N 5A Cover, VR Interlock Latch (Page# 380)
INT13-0003N SPG-0075N
1C Contact Kit, VR Interlock (Page# 376) 5B Latch, VR Interlock Center (Page# 374)
1D Cam Assembly, VR Interlock (Page# 373) Spring, 2” Lg X 15/32” OD-.067 Wire, 14
2 Angle, VR Interlock Mounting (Page# 369) 5C Turns (Page# 394)

Mounting hardware included.

NOTE: Isometric drawings should be used for reference only (See parts sections for details) 337

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT
Interlock Isometric Drawing

TYPE: “K5” (w/ Double Bar & Brackets)

Manual Double Swing Door

Interlock
Assemblies

Part No. Item No Description Part No. Item No Description
SW11-0005N
INT14-0002N 1 Switch Assembly, K5 Interlock SPG-0024N 1C-1 Contact, “K” Series Bridging (Page# 413)
(Page# 387) SW11-0006N Spring, 1 1/4” Lg X 9/32” OD-0.030 Wire, 15
INT14-0003N Cover, K5 Interlock With Insulator INT16-0009N 1C-2 Turns Stainless Steel (Page# 418)
SW11-0003N 1A (Page# 378)
INT16-0007N 1D Shaft, “K” Series Door Contact (Page# 406)
1B Contact Base, “K” Series (Page# 414) Bar, K1/K5 Interlock Bracket & Locking
Cam Assembly, K1/K5 Interlock Contact 2 (Page# 372)
1C (Page# 373)

Mounting hardware included.

338 NOTE: Isometric drawings should be used for reference only (See parts sections for details)

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT

Interlock Isometric Drawing

TYPE: “K5” (w/ Chain Bolt & Operating Bar)

Manual Double Swing Door

Interlock
Assemblies

Part No. Item No Description Part No. Item No Description
SW11-0006N
INT14-0002N 1 Switch Assembly, K5 Interlock INT15-0002N 1D Shaft, “K” Series Door (Page# 406)
(Page# 387) INT15-0003N 2 Bar, K5 Interlock Upper (Page# 372)
INT14-0003N Cover, K5 Interlock With Insulator INT15-0008N 3 Bar, K5 Interlock Lower (Page# 372)
SW11-0003N 1A (Page# 378) Anchor Kit, K5 Interlock Chain (72” Chain)
INT16-0007N CHN-0014N 4 (Page# 372)
SW11-0005N 1B Contact Base, “K” Series (Page# 414) INT15-0007N
SPG-0024N Cam Assembly, K1/K5 Interlock Contact CHN-0013N Chain, K5 Interlock #2 end Welded Sash 72”
1C (Page# 373) 4A Lg Copper Plated (Page# 373)

1C-1 Contact, “K” Series Bridging (Page# 413) 4B Anchor, K5 Interlock Chain (Page# 372)
Spring, 1 1/4” Lg X 9/32” OD-0.030 Wire, 15 Chain, K5 Interlock #2 end Welded Sash 36”
1C-2 Turns Stainless Steel (Page# 418) 5 Lg Copper Plated (Page# 373)

Mounting hardware included.

NOTE: Isometric drawings should be used for reference only (See parts sections for details) 339

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT
Interlock Isometric Drawing

TYPE: “K” (w/ Bar & Bracket)

Manual Sliding Door

Interlock
Assemblies

Part No. Item No Description Part No. Item No Description
SW11-0005N
INT16-0004N 1 Switch Assembly, K Interlock (Sliding Doors) 1C-1 Contact, “K” Series Bridging Contact
INT16-0006N (Page# 387) SPG-0024N (Page# 413)
SW11-0003N 1A Cover, K Switch Assembly (Page# 378) SW11-0006N Spring, 1 1/4” Lg X 9/32” OD-0.030 Wire, 15
INT16-0008N 1B Contact Base, “K” Series (Page# 414) INT16-0010N 1C-2 Turns Stainless Steel (Page# 418)

1C Cam, K Interlock Contact (Sliding Doors) 1D Shaft, “K” Series Door Contact (Page# 406)
(Page# 373) Bar, K Interlock Locking(Sliding Doors)
2 (Page# 372)
Mounting hardware included.

340 NOTE: Isometric drawings should be used for reference only (See parts sections for details)

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT
Interlock Isometric Drawing

TYPE: “K-1” (w/ Bar & Bracket)

Manual Swing Door

Interlock
Assemblies

Part No. Item No Description Part No. Item No Description
SW11-0005N
INT16-0003N 1 Switch Assembly, K1 Interlock (Swing Doors) SPG-0024N 1C-1 Contact, “K” Series Bridging (Page# 413)
INT16-0005N (Page# 387) SW11-0006N Spring, 1 1/4” Lg X 9/32” OD-0.030 Wire, 15
SW11-0003N 1A Cover, K1 Switch Assembly (Page# 378) INT16-0009N 1C-2 Turns Stainless Steel (Page# 418)
INT16-0007N
1B Contact Base, “K” Series (Page# 414) 1D Shaft, “K” Series Switch (Page# 406)
Cam, K1/K5 Interlock Contact (Swing Doors) Bar, K1/K5 Locking(Swing Doors)
1C (Page# 373) 2 (Page# 372)

Mounting hardware included.

NOTE: Isometric drawings should be used for reference only (See parts sections for details) 341

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT
Interlock Isometric Drawing

TYPE: “WX”, “WP”

Manual Sliding Door (Water & Explosion Resistant)

Interlock
Assemblies

Part No. Item No Description Part No. Item No Description

INT18-0008L/R Switch Assembly, WX Explosion Slide INT18-0011N 1E Contact Kit, WP/WX Retiring Cam
1-X (Not NEMA Rated, UL Listed or CSA (Page# 376)
INT18-0010N Certified) (Page# 388) INT18-0012N Contact Base, WP/WX Retiring Cam
Cover, 3/8” WX Interlock With Hardware 1E-1 (Page# 377)
INT18-0006L/R 1XA (Page# 380) INT5-0018N
1E-2 Contact, M/N/NHA Cam Bridging
INT18-0009N 1-W Switch Assembly, WP Moisture Slide (NEMA INT18-0019L/R (Page# 376)
INT18-0013N Rated and CSA Certified) (Page# 388) INT18-0025L/R Keeper, WP/WX Interlock Sliding
INT18-0014N Cover, 1/8” WP Interlock With Gasket & INT18-0024L/R 2 (Page# 381)
INT5-0015N 1WA Hardware (Page# 380) SEE CHART 1
INT18-0021N INT5-0027N 3 Latch, WP/WX Sliding Door (Page# 375)
INT18-0020N 1B Contact Kit, WP/WX Door (Page# 376) Cam, WP/WX Sliding Door Forked
1B-1 Contact Base, WP/WX Door (Page# 377) 4 (Page# 375)

1B-2 Contact, WP/WX Interlock Bridging 5 Arm & Roller (Page# 386)
(Page# 375 or 413) 5A Roller & Bolt, Roller Arm (Page# 386)
1C Cam, WP/WX Door Contact (Page# 374)
Cam, WP/WX Retiring Cam Contact Mounting hardware included.
(Page# 374)
1D

342 NOTE: Isometric drawings should be used for reference only (See parts sections for details)

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT

Interlock Isometric Drawing

TYPE: “WX”, “WP”

Manual Swing Door (Water & Explosion Resistant)

Interlock
Assemblies

Part No. Item No Description Part No. Item No Description

INT18-0007L/R Switch Assembly, WX Explosion Swing INT18-0011N 1E Contact Kit, WP/WX Retiring Cam
1-X (Not NEMA Rated, UL Listed or CSA Certified) (Page# 376)
INT18-0010N (Page# 388) INT18-0012N Contact Base, WP/WX Retiring Cam
Cover, 3/8’ WX Interlock With Hardware 1E-1 (Page# 377)
INT18-0005L/R 1XA (Page# 380) INT5-0018N
1E-2 Contact, M/N/NHA Cam Bridging
INT18-0009N Switch Assembly, WP Moisture Swing INT18-0018L/R (Page# 376)
INT18-0013N 1-W (NEMA Rated and CSA Certified) INT18-0023L/R Keeper, WP/WX Interlock Swing
INT18-0014N (Page# 388) INT18-0022L/R 2 (Page# 381)
INT5-0015N SEE CHART 1
INT18-0021N 1WA Cover, 1/8” WP Interlock With Gasket & INT5-0027N 3 Latch, WP/WX Swing Door (Page# 375)
INT18-0020N Hardware (Page# 380) Cam, WP/WX Swing Door Forked
1B Contact Kit, WP/WX Door (Page# 376) 4 (Page# 375)

1B-1 Contact Base, WP/WX Door (Page# 377) 5 Arm & Roller (Page# 386)
Contact, WP/WX Interlock Bridging 5A Roller & Bolt, Roller Arm (Page# 386)
1B-2 (Page# 375 or 413-Lock & Contact Section)
Mounting hardware included.
1C Cam, WP/WX Door Contact (Page# 374)
Cam, WP/WX Retiring Cam Contact
1D (Page# 374)

NOTE: Isometric drawings should be used for reference only (See parts sections for details) 343

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT
Interlock Isometric Drawing

TYPE: “N”, “NHA”

Manual Sliding Door

Interlock
Assemblies

Part No. Item No Description Part No. Item No Description
INT22-XXXXX
INT22-0015N FIG. 3 Interlock, N/NHA Sliding Door INT22-0057N 3B-V Bridging Contact, NHA Keeper, With Spanner
INT22-0041N ASSY (Page# 359-360) INT4-XXXXX Head Screws (Page# 376)
INT22-0019N Cover, “N” Interlock (Page# 379) SPG-0030N 4 Keeper, N/NHA Interlock (Page# 381)
INT22-0021N 1 Cover, “NHA” Interlock (Page# 379) Spring, 1 7/8” Lg X 13/32” OD-0.050 Wire, 15
INT5-0018N 1-V Contact Kit, N/NHA Interlock Upper INT22-0018N 5 Turns (Page# 394)
2 (Page# 376)
INT22-0020N 2A Contact Base, N/NHA Upper INT22-0016L/R 6 Retainer, N/NHA Interlock Pin Spring
2B Contact, M/N/NHA Cam Bridging (Page# 393)
INT22-0058N (Page# 377) INT5-0023N Cam Locking, N/NHA Interlock
3 Contact Kit, “N” Interlock Lower 7 (Page# 374)
INT22-0022N (Page# 375) INT5-0028N
3-V Contact Kit, NHA Interlock Lower, With Span- SEE CHART 1 8 Shaft, M/N Interlock Cam Sliding Door
INT5-0019N ner Head Screws (Page# 375) INT5-0027N (Page# 391)
3A Contact Base, “N/NHA” Interlock Lower Clamp, Lock Emergency Unlocking Assembly
(Page# 377) 9 (Page# 368)
3B Bridging Contact, M/N Keeper
(Page# 376 or 413-Lock & Contact Section) 10 Arm & Roller (Page# 386)
10A Roller & Bolt, Roller Arm (Page# 386)

Mounting hardware included.

344 NOTE: Isometric drawings should be used for reference only (See parts sections for details)

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT
Interlock Isometric Drawing

TYPE: “N”, “NHA”

Manual Swing Door

Interlock
Assemblies

Part No. Item No Description Part No. Item No Description
INT4-XXXXX
INT22-XXXXX FIG. 1 Interlock, N/NHA Swing Door - Shaft INT4-XXXXX 4-A Keeper, N/NHA Interlock - Flush Mounted
ASSY pointing to side wall (Page# 358, 360) SPG-0030N (Page# 380-381)
INT22-XXXXX FIG. 2 Interlock, N/NHA Swing Door - Shaft pointing INT22-0018N Keeper, N/NHA Interlock - Kalamein
INT22-0015N ASSY to back of elevator (Page# 358, 360) INT22-0016L/R 4-B (Page# 380-381)
INT22-0041N Cover, “N” Interlock (Page# 379) INT5-0022N
INT22-0019N 1 Cover, “NHA” Interlock (Page# 379) INT5-0040N 5 Spring, 1 7/8” Lg X 13/32” OD-0.050 Wire, 15
INT22-0021N 1-V Contact Kit, N/NHA Interlock Upper INT5-0020N Turns (Page# 394)
INT5-0018N 2 (Page# 376) INT5-0038N Retainer, N/NHA Interlock Pin Spring
2A Contact Base, N/NHA Upper (Page# 377) SEE CHART 1 6 (Page# 393)
INT22-0020N 2B Contact, M/N/NHA Cam Bridging Upper INT5-0027N
(Page# 376) INT5-0021N 7 Cam Locking, N/NHA Interlock
INT22-0058N 3 Contact Kit, “N” Interlock Lower INT5-0039N (Page# 374)
(Page# 375) Shaft, M/N Interlock Ball Pin 10” Lg
INT22-0022N 3-V Contact Kit, NHA Interlock Lower, With Span- 8 (Page# 391)
ner Head Screws (Page# 375)
INT5-0019N 3A Contact Base, “N/NHA” Interlock Lower 8-S Shaft, MHA/NHA Interlock Ball Pin 10” Lg, SS
(Page# 377) (Page# 391)
INT22-0057N 3B Bridging Contact, M/N Keeper Shaft, M/N Interlock 3” Cam Swing Door
(Page# 376 or 413-Lock & Contact Section) 9 (Page# 391)
INT4-XXXXX 3B-V Bridging Contact, NHA Keeper, With Spanner
Head Screws (Page# 376) 9-S Shaft, MHA/NHA Interlock 3” Cam Swing
4 Keeper, N/NHA Interlock - Surface Mounted Door, SS (Page# 391)
(Page# 380-381) 10 Arm & Roller (Page# 386)
10A Roller & Bolt, Roller Arm (Page# 386)
Shaft, M/N Interlock 10” Cam Swing Door
11 (Page# 391)

Mounting hardware included. 11-S Shaft, MHA/NHA Interlock 10” Cam Swing
Door, SS (Page# 391)

NOTE: Isometric drawings should be used for reference only (See parts sections for details) 345

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT
Interlock Isometric Drawing

TYPE: “N”, “NHA” (WECO)

Manual Swing Door (Westinghouse Replacement)

Interlock
Assemblies

Part No. Item No Description Part No. Item No Description
INT22-0057N
INT22-0013L/R 1 Switch Assembly, “N” Interlock Swing Door INT4-0005N 1VC-D Bridging Contact, NHA Keeper, With Spanner
(Existing Westinghouse SW-1 Lock Cutouts) SPG-0030N 1D Head Screws (Page# 376)
INT22-0039L/R 1V (Page# 207) INT22-0018N 1E Keeper, N/NHA Westinghouse Swing Door
INT22-0015N 1A Switch Assembly, “NHA” Interlock Swing Door INT22-0016L/R 1F Interlock (Page# 381)
INT22-0041N 1VA (Page# 389) INT5-0020N 1G Spring, 1 7/8” Lg X 13/32” OD-0.050 Wire, 15
INT22-0019N 1B Cover, “N” Interlock (Page# 379) INT5-0038N 1H Turns (Page# 394)
INT22-0021N 1B-1 Cover, “NHA” Interlock (Page# 379) INT5-0022N 1H-S Retainer, N/NHA Interlock Pin Spring
INT5-0018N 1B-2 Contact Kit, N/NHA Interlock Upper INT5-0040N 1I (Page# 393)
(Page# 376) INT5-0025N 1I-S Cam Locking, N/NHA Interlock
INT22-0020N 1C Contact Base, N/NHA Upper (Page# 377) INT5-0027N 2 (Page# 374)
Contact, M/N/NHA Cam Bridging 2A Shaft, M/N Interlock 3” Cam Swing Door
INT22-0058N 1VC (Page# 376) (Page# 391)
Contact Kit, “N” Interlock Lower Shaft, MHA/NHA Interlock 3” Cam Swing
INT22-0022N 1C-1 (Page# 375 or 293) Door, SS (Page# 391)
Contact Kit, NHA Interlock Lower, With Span- Shaft, M/N Interlock Ball Pin 10” Lg
INT5-0019N 1C-D ner Head Screws (Page# 375) (Page# 391)
Contact Base, “N/NHA” Interlock Lower Shaft, MHA/NHA Interlock Ball Pin 10” Lg, SS
(Page# 377) (Page# 391)
Bridging Contact, M/N Keeper Arm & Roller, 4 1/2” CL.
(Page# 376 or 413-Lock & Contact Section) (Page# 386 or 293)
Roller & Bolt, Roller Arm (Page# 386)
Mounting hardware included.

346 NOTE: Isometric drawings should be used for reference only (See parts sections for details)

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT

Interlock Isometric Drawing

TYPE: “N”, “NHA” (OTIS)

Manual Swing Door-Otis Replacement

Interlock
Assemblies

Part No. Item No Description Part No. Item No Description
INT4-0006N
INT22-0015N 1 Cover, “N” Interlock (Page# 379) SPG-0030N 4 Keeper, N/NHA Otis Swing Door Interlock
INT22-0041N 1-V Cover, “NHA” Interlock (Page# 379) INT22-0018N (Page# 381)
INT22-0019N Contact Kit, N/NHA Interlock Upper INT22-0016L/R Spring, 1 7/8” Lg X 13/32” OD-0.050 Wire, 15
INT22-0021N 2 (Page# 376) INT5-0022N 5 Turns (Page# 394)
INT5-0018N INT5-0040N
2A Contact Base, N/NHA Upper (Page# 377) INT5-0020N 6 Retainer, N/NHA Interlock Pin Spring
INT22-0020N Contact, M/N/NHA Cam Bridging INT5-0038N (Page# 393)
2B (Page# 376) INT5-0025N Cam Locking, N/NHA Interlock
INT22-0058N INT5-0027N 7 (Page# 374)
3 Contact Kit, “N” Interlock Lower
INT22-0022N (Page# 375 or 293) 8 Shaft, M/N Interlock Ball Pin 10” Lg
Contact Kit, NHA Interlock Lower, With Span- (Page# 391)
INT5-0019N 3-V ner Head Screws (Page# 375) Shaft, MHA/NHA Interlock Ball Pin 10” Lg, SS
8-S (Page# 391)
INT22-0057N 3A Contact Base, “N/NHA” Interlock Lower
(Page# 377) 9 Shaft, M/N Interlock 3” Cam Swing Door
Bridging Contact, M/N Keeper (Page# 391)
3B (Page# 376 or 413-Lock & Contact Section) Shaft, MHA/NHA Interlock 3” Cam Swing
9-S Door, SS (Page# 391)
3B-V Bridging Contact, NHA Keeper, With Spanner
Head Screws (Page# 376) 10 Arm & Roller, 4 1/2” CL.
(Page# 386 or 293-Car Zone Lock Section)
Mounting hardware included. 10A Roller & Bolt, Roller Arm (Page# 386)

NOTE: Isometric drawings should be used for reference only (See parts sections for details) 347

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT
Interlock Isometric Drawing

TYPE: “MO10”, “MOH10”, “MOHRD10”

Sliding Door - Otis Replacement & Round Elevator

Interlock
Assemblies

Part No. Item No Description Part No. Item No Description
INT1H-0017N
INT23-0007L/R 1 Release-Keeper Assembly, MOH10 INT1H-0023N 1A-2 Contact, MO Keeper Bridge (Page# 376)
INT23-0008L/R (Page# 385) INT1H-0018N 1B Roller & Shaft, MO Interlock (Page# 386)
INT23-0006L/R Release-Keeper, MOHRD10 Round Door Link, Upper MO Interlock Assembly, 10
INT23-0009L/R 2 (Page# 385) INT23-0013N 4 1/2”Lg X 1/2”Wd X 1/8”Thk (Page# 384)
INT23-0011N
INT23-0010L/R 3 Release & Keeper Assembly, Type “MO10” INT1H-0013L/R 5 Link, Type “MO10” Interlock Upper
(Page# 385) INT1H-0014N (Page# 384)
INT23-0012N Keeper Assembly, MOH10 Interlock INT1H-0024L/R 6 Guide, MO10 Interlock Link (Page# 393)
1A (Page# 380) INT1H-0031N Switch Assembly, MO Interlock
7 (Page# 387)
Keeper Assembly, MOHRD10 Interlock
2A ( Keeper Bent For Round Elevators)
(Page# 380) 7A Cover, MO Interlock (Page# 378)
7B Contact Base, MO Interlock (Page# 377)
Roller & Shaft, MO10 Interlock (Movable Plate, Switch Track Mounting 2” CL
1A-1 Roller) (Page# 386) 8 (Page# 370)

Mounting hardware included.

348 NOTE: Isometric drawings should be used for reference only (See parts sections for details)

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT

Interlock Isometric Drawing

TYPE: “MOCPH10”

Sliding Door - Center Parting

Interlock
Assemblies

Part No. Item No Description Part No. Item No Description
NT2H-0011N
INT23-0007L/R 1 Release-Keeper Assembly, MOH10 PIN-0046N 3B Cover, MOCP Interlock (Page# 379)
(Page# 385) INT2H-0010N 3C Pin, 3/16” X 1 5/16” Clear Nylon (Call G.A.L.)
INT23-0009L/R Keeper Assembly, MOH10 Interlock INT2H-0024N 3D Arm, MOCP Rocker Assembly (Page# 388)
1A (Page# 380) INT1H-0024L/R Cam, MOCP Rocker Arm Lift up
INT23-0012N INT2H-0018R 3D-1 (Page# 388)
INT1H-0017N 1A-1 Roller & Shaft, MO10 Interlock INT2H-0015N
INT1H-0023N (Movable Roller) (Page# 386) INT1H-0031N 3E Contact Base, MO Interlock (Page# 377)
INT1H-0018N 1A-2 Contact, MO Keeper Bridge (Page# 376) INT1H-0036L
1B Roller & Shaft, MO Interlock (Page# 386) INT2H-0017R 3F Contact Base, MOCP Interlock (Page# 377)
INT2H-0007N 4 Keeper Fixed, MOCP Interlock (Page# 380)
INT2H-0008N Link, Upper MO Interlock Assembly, 10 1/2” Plate, Switch Track Mounting 2” CL
2 Lg X 1/2” Wd X 1/8” Thk (Page# 384) 5 (Page# 370)

3 Switch Assembly, MOCP Interlock 1A-2/3E Contact Kit, MO-KT (Page# 375)
(Page# 387) 1A-2/3F Contact Kit, MO-KT (Page# 375)
3A Cover, MOCP Interlock (Page# 379)

Mounting hardware included.

NOTE: Isometric drawings should be used for reference only (See parts sections for details) 349

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT
Interlock Assemblies (Power Doors)

Sliding Door (Conventional)

MO Interlock With Single Roller

Interlock Part No. S/S 2/SP C/P 2SP/CP Link Length
Assemblies INT1H-0098L/R 20”-29” 33”-39” 33”-39” A (14 3/4”)
INT1H-0099L/R 30”-39” 30”-39” 40”-49” 40”-49” B (18 3/4”)
INT1H-0100L/R 24”-29” 40”-44” 50”-59” C (22 3/4”)
INT1H-0101L/R 40”-44” 45”-52” 50”-59” 60”-79” D (26 3/4”)
INT1H-0102L/R 45”-48” 53”-60” 80”-83” E (30 3/4”)
INT1H-0103L/R 61”-72” 60”-79” F (36 3/4”)
S/S 80”-83” 2SP/CP
Part No. 20”-29” 33”-39” Link Length
INT1M-0001L/R 30”-39” MOM Interlock With Vertical Rollers 40”-49” A (14 3/4”)
INT1M-0002L/R 40”-44” 50”-59” B (18 3/4”)
INT1M-0003L/R 45”-48” Standard 60”-79” C (22 3/4”)
INT1M-0004L/R 80”-83” D (26 3/4”)
INT1M-0005L/R S/S 2/SP C/P E (30 3/4”)
INT1M-0006L/R 20”-29” 30”-39” 33”-39” 2SP/CP F (36 3/4”)
30”-39” 24”-29” 40”-49” 33”-39”
Part No. 40”-44” 40”-44” 40”-49” Link Length
INT1M-0078L/R 45”-48” 45”-52” 50”-59” 50”-59” A (14 3/4”)
INT1M-0079L/R 53”-60” 60”-79” B (18 3/4”)
INT1M-0080L/R 61”-72” 60”-79” 80”-83” C (22 3/4”)
INT1M-0081L/R 80”-83” D (26 3/4”)
INT1M-0082L/R E (30 3/4”)
INT1M-0083L/R Cut Down Release F (36 3/4”)

2/SP C/P
30”-39” 33”-39”
24”-29” 40”-49”
40”-44”
45”-52” 50”-59”
53”-60”
61”-72” 60”-79”
80”-83”

350 (*) Special Engineering Required