GAL Catalog Priceless

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing Drive Arm
Two Speed Center Parting Doors Assemblies
DOOR EQUIPMENT
Operator Parts

Drive Arm Sub-Assemblies

Note: Door link & bracket not included. Refer to Door Link & Bracket Assemblies (Page 91) to purchase it as an additional part.
15” Headers - Conventional (Used With Type “A” Hanger)

Part No. 2SP/CP “C” DIM “E” DIM “F” DIM “G” DIM “L” DIM “OA” DIM
OP22-0451L/R 32” 22 3/4” 20” 13” 11” 3” 34 3/4”
OP22-0660L/R 33” 22 5/8” 20” 13” 11” 34 3/4”
OP22-0452L/R 34” 22 5/8” 20” 13” 11” 3 1/2” 34 3/4”
OP22-0453L/R 24 1/2”-24 5/8” 13” 11” 4” 35 1/4”
OP22-0454L/R 35”-36” 24 1/8”-24 3/8” 20 1/2” 13” 11” 35 1/4”
OP22-0661L/R 37”-38” 20 1/2” 13” 11” 3 1/2” 35 1/4”
OP22-0455L/R 24” 20 1/2” 13” 11” 4” 39 1/4”
OP22-0456L/R 39” 25 3/4”-25 7/8” 24 1/2” 13” 11” 39 1/4”
OP22-0662L/R 40”-41” 25 1/2”-25 5/8” 24 1/2” 13” 11” 4 1/2” 39 1/4”
OP22-0457L/R 42”-43” 24 1/2” 13” 11” 4” 40 3/4”
OP22-0458L/R 25 3/8” 13” 11” 40 3/4”
OP22-0459L/R 44” 27 1/16” 26” 13” 11” 4 1/2” 40 3/4”
45” 26 11/16”-26 15/16” 26” 5”
46”-48” 26 9/16” 26”
49” 4 1/2”
5”

5 1/2”

17” Headers - Conventional (Used With Type “A” Hanger)

Part No. 2SP/CP “C” DIM “E” DIM “F” DIM “G” DIM “L” DIM “OA” DIM
OP22-0460L/R 50” 29 7/16” 29 1/2” 15” 13” 4 1/2” 46 1/4”
OP22-0663L/R 51” 29 5/16” 29 1/2” 15” 13” 46 1/4”
OP22-0461L/R 52” 29 3/16” 29 1/2” 15” 13” 5” 46 1/4”
OP22-0664L/R 53” 29 1/16” 29 1/2” 15” 13” 5 1/2” 46 1/4”

6”

17” Headers - Conventional (Used With Type “A” & “C” Hanger)

Part No. 2SP/CP “C” DIM “E” DIM “F” DIM “G” DIM “L” DIM “OA” DIM
OP22-0462L/R 54” 28 15/16” 29 1/2” 15” 13” 6 1/2” 46 1/4”
OP22-0463L/R 55” 30 7/8” 31 1/2” 14” 12” 6 1/2” 47 1/4”
OP22-0665L/R 56” 30 3/4” 31 1/2” 14” 12” 47 1/4”
OP22-0464L/R 57” 30 5/8” 31 1/2” 14” 12” 7” 47 1/4”
OP22-0666L/R 58” 30 1/2” 31 1/2” 14” 12” 7 1/2” 47 1/4”
OP22-0465L/R 59” 30 3/8” 31 1/2” 14” 12” 47 1/4”
OP22-0466L/R 60” 35 1/4” 16” 14” 8” 51 3/4”
OP22-0467L/R 61” 35 1/8” 34” 16” 14” 8 1/2” 51 3/4”
OP22-0667L/R 62” 34” 16” 14” 51 3/4”
OP22-0468L/R 63” 35” 34” 16” 14” 5” 51 3/4”
OP22-0469L/R 64” 34 7/8” 34” 16” 14” 5 1/2” 51 3/4”
34 3/4” 34”
6”
6 1/2”

7”

(*) Special Engineering Required 83

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

Drive Arm DOOR EQUIPMENT
Assemblies Operator Parts

Drive Arm Sub-Assemblies

Two Speed Center Parting Doors

19” Headers - Conventional (Used With Type “A” & “C” Hanger)

Part No. 2SP/CP “C” DIM “E” DIM “F” DIM “G” DIM “L” DIM “OA” DIM
OP22-0470L/R 65” 36 1/16” 35” 18 1/2” 14 1/2” 7” 55 1/4”
OP22-0471L/R 66” 35 15/16” 35” 18 1/2” 14 1/2” 55 1/4”
OP22-0668L/R 67” 35 13/16” 35” 18 1/2” 14 1/2” 7 1/2” 55 1/4”
OP22-0472L/R 68” 35 11/16” 35” 18 1/2” 14 1/2” 8” 55 1/4”
OP22-0473L/R 69” 35 9/16” 35” 18 1/2” 14 1/2” 55 1/4”
OP22-0474L/R 70” 38 7/16” 35” 19 1/2” 15 1/2” 8 1/2” 56 1/4”
OP22-0669L/R 71” 38 5/16” 35” 19 1/2” 15 1/2” 9” 56 1/4”
OP22-0475L/R 72” 38 3/16” 35” 19 1/2” 15 1/2” 8” 56 1/4”
OP22-0670L/R 73” 38 1/16” 35” 19 1/2” 15 1/2” 56 1/4”
8 1/2”
9”

9 1/2”

Crank Arm Assemblies

**Discontinued “L” Operator Crank Arms (S/S - 2/SP - 3/SP)**
Discontinued August 2009
Part No. “L” DIM Size Range S/S 2/SP 3/SP Replaced With
24”-26” 30”-31”
OP22-0492N 13” 4” – 5 7/8”
22”-39” 27”-39” 32”-39” OP22-0740N
OP22-0493N 15” 5 5/16” – 8 1/2”
OP22-0494N 17” 8 9/16” – 10 1/2” 40”-48” 40”-49” 40”-52”
50”-64” 53”-67”
OP22-0495N 19” 10 9/16” – 12 7/8” 65”-72” 68”69” OP22-0741N
OP22-0496N 22 5/8” 12 15/16” – 15 3/8”

Current crank arm used – as of August 2009

Part No. S/S 2/SP 3/SP “L” DIM
OP22-0740N 22”-48” 24”-48” 30”-49” 13 7/16”
OP22-0741N 49”-72” 50”-69” 17 7/16”

Crank Arm Assemblies - Center Parting

**Discontinued “L” Operator Crank Arms (C/P – 2SP/CP)**
Discontinued August 2009
Part No. C/P 2SP/SP “A” Arm “B” Arm Replacement Note
OP22-0497N 30”-49” 32”-37” | 40”-46” 5” 5”
OP22-0498N 50”-53” 38”-39” | 47”-53” | 55”-60” 5” 6 3/4”
OP22-0499N 54”-58” 54” | 60”-63” 6 3/4” 6 3/4” See table below
for part No.
OP22-0500N 59” 64”-69” 6 3/4” 8 1/2” replacement
OP22-0501N 70”-72” 8 1/2” 10”

Current crank arm used – as of August 2009

Part No. C/P 2SP/CP “L1” DIM “A” Arm “L2” DIM “B” Arm Size Range “A” Arm Size Range “B” Arm
OP22-0742N 30”-49” 32”-49”
OP22-0743N 50”-54” 50”-59” 5 3/8” 5 3/8” 4 3/8” - 6 3/4” 4 3/8” - 6 3/4”
OP22-0744N 55”-64” 5 3/8” 7 1/8” 4 3/8” - 6 3/4” 6 1/4” - 8 5/8”
OP22-0745N 65”-83” 60”-64” 7 1/8” 7 1/8” 6 1/4” - 8 5/8” 6 1/4” - 8 5/8”
OP22-0746N 65”-83” 7 1/8” 9 3/8” 6 1/4” - 8 5/8” 8 1/2” - 10 7/8”
OP22-0747N 7 1/8” 7 1/8” 6 1/4” - 8 5/8” 6 1/4” - 8 5/8”
7 1/8” 9 3/8” 6 1/4” - 8 5/8” 8 1/2” - 10 7/8”

84 (*) Special Engineering Required

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing Drive Arm
Assemblies
Part No. DOOR EQUIPMENT
OP22-0506N Operator Parts
OP22-0507N
OP22-0508N Drive Shoe and Crank Arm Assemblies
OP22-0509N
Drive Shoe Assemblies

Description
LDC Shoe, 36 3/4” OA Length Assembly, with MTG Angles
Shoe, 41” OA Length Assembly, with MTG Angles and Brace
Shoe, 46” OA Length Assembly, with MTG Angles and Brace
Shoe, 49” OA Length Assembly, with MTG Angles and Brace

Crank Arm With Roller Bearing (Shoe Drive)

**Discontinued Shoe Drive Crank Arms**
Part No. “L” DIM Size Range S/S & 2/SP Replaced With
OP22-0502N 22 5/8” 13 5/8” – 16 1/8” 26”-31”
OP22-0503N 25 5/8” 16 5/8” – 19 1/8” 32”-37” OP22-0748N

OP22-0504N 28 5/8” 19 5/8” – 22 1/8” 38-“43” OP22-0749N
OP22-0505N 31 5/8” 22 5/8” – 25 1/8” 44”-49”

Current crank arm used – as of August 2009

Part No. S/S & 2/SP “L” DIM Size Range
OP22-0748N 26”-37” 22 1/2” 13 5/16” - 19 9/16”
OP22-0749N 38”-49” 28 1/4” 13 5/16” - 19 9/16”
OP22-0752N* 49” & UP Special Size
Special Size

Drive Shoe Parts

OP22-0510N OP22-0511N OP22-0512N

Bumper, LDC Shoe Angle, LDC Drive Shoe Brace, LDC Drive Shoe

(*) Special Engineering Required 85

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

Drive Arm DOOR EQUIPMENT
Parts Operator Parts

Aluminum Drive Arm

Single & Two Speed D.O.
Note For 2/SP 24”-29” Door Openings:

Part No. OP22-0184N was used up to June 1994 for 24”-29” D.O.
Part No. OP22-0405N & OP22-0406N are the current arms being used from June 1994 and on.

13” Headers - Conventional 13” Headers - Conventional

Part No. S/S 2/SP “E” DIM “F” DIM “OA” DIM Part No. 2/SP “E” DIM “F” DIM “OA” DIM
OP22-0182N 22”-24” 30”-34” 18” 14” 33 3/4” OP22-0405N* 24”-26” 30” 11” 42 3/4”
OP22-0183N 25”-29” 24”-29” 19” 15” 35 3/4” OP22-0406N* 27”-29” 30” 12” 43 3/4”
35”-39”
OP22-0184N 30”-34” 40”-44” 25” 15” 41 3/4”
45”-48”
OP22-0185N 35”-39” 24” 16” 41 3/4”
OP22-0186N 40”-44” 26” 20” 47 3/4”
OP22-0187N 45”-48” 31” 21” 53 3/4”

15” Headers - Conventional 17” Headers - Conventional

Part No. 2/SP “E” DIM “F” DIM “OA” DIM “V” DIM Part No. 2/SP “E” DIM “F” DIM “OA” DIM “V” DIM
OP22-0286N 49”-52” 32” 22” 55 3/4” 26” OP22-0288N 57”-60” 36” 24” 61 3/4” 29”
OP22-0287N 53”-56” 35” 23” 59 3/4” 28 1/2” OP22-0289N 61”-64” 40” 25” 66 3/4” 32”

Part No. 19” Headers - Conventional Part No. 17” Headers - (High Cab)
OP22-0290N OP22-0188N*
OP22-0291N 2/SP “E” DIM “F” DIM “OA” DIM “V” DIM OP22-0189N* S/S 2/SP “E” DIM “F” DIM “OA” DIM
65”-68” 41” 26” 68 3/4” 33” OP22-0190N* 30”-34” 30”-34” 29” 15” 45 3/4”
69”-72” 45” 27” 73 3/4” 35 1/2” OP22-0191N* 35”-39” 35”-39” 28” 16” 45 3/4”
40”-44” 40”-44” 29” 20” 50 3/4”
45”-48” 45”-48” 34” 21” 56 3/4”

86 (*) Special Engineering Required