GAL Catalog Priceless

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing Car Door Hanger
Heavy Doors or Large Opening 70” & Above Assemblies
DOOR EQUIPMENT
Car Door Hanger Assemblies

Three Speed - Conventional - Type “A”

Ungeared

Less Header

Note: For three speed ungeared heavy doors or large 70” & above Note: Advise Opening Size and Hand 3/SP
openings, contact G.A.L Sales or Engineering for assistance. 30’’-48’’
Advise opening size, hand, cab height, and type of operator arm Part No. 49’’-59’’
arrangement. CDH9-0130L/R* 60’’-69’’
CDH9-0131L/R*
CDH9-0132L/R*

Three Speed - Water Resistant - Type “AW”

Note: Geared
A)
B) All ferrous material yellow zinc dichromate plated
Contact G.A.L Sales or Engineering Department for three speed geared
hangers.

Center Parting - Conventional - Type “A”

15”, 17” Header (Ungeared)

Note: Contact G.A.L Engineering Department for 15” header ungeared 33” D.O. hanger
assembly.

Part No. C/P Header Height Track Length
CDH3-0001N 30’’-32’’ 15” 64”
CDH3-0002N 34’’-35’’ 15” 70”
CDH3-0003N 36’’-38’’ 15” 76”
CDH3-0004N 39’’-41’’ 15” 82”
CDH3-0005N 42’’-44’’ 15” 88”
CDH3-0006N 45’’-47’’ 15” 94”
CDH3-0007N 48’’-49’’ 15” 100”
CDH3-0009N* 17” 100”
CDH3-0008N* 50’’ 17” 106”
CDH3-0020N* 51’’-54’’ 17” 106”
CDH3-0021N* 55’’-56’’ 17” 112”
57’’-59’’

(*) Special Engineering Required 163

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT Track Length
Car Door Hanger Assemblies 117”
129”
Car Door Hanger Center Parting - Conventional - Type “A” 129”
Assemblies 141”
17”, 19” Header (Ungeared) - Split Hangers 153”
165”
Part No. C/P Header Height
CDH3-0242N* 60’’-62’’ 17”
CDH3-0243N* 63’’-64’’ 17”
CDH3-0244N* 65’’-68’’ 19”
CDH3-0245N* 69’’-74’’ 19”
CDH3-0246N* 75’’-80’’ 19”
CDH3-0247N* 81’’-83’’ 19”

15” Header (Ungeared) - Arranged for High Cab

Note:
A) Drive arm supports are included with hanger but may or may not be mounted to header.
B) High-Cab Kit not included. Refer to Hi-Cab Kit for appropriate part #.

Part No. C/P Hi-Cab Header Track Length Part No. C/P Hi-Cab Header Track Length
CDH3-0153N* 30’’-32’’ 19” 64” CDH3-0178N* 36’’-38’’ 27” 76”
CDH3-0154N* 19” 70” CDH3-0179N* 27” 82”
CDH3-0155N* 33’’ 19” 70” CDH3-0180N* 39’’ 27” 82”
CDH3-0156N* 34’’-35’’ 19” 76” CDH3-0181N* 40’’-41’’ 27” 88”
CDH3-0157N* 36’’-38’’ 19” 82” CDH3-0182N* 42’’-44’’ 27” 94”
CDH3-0158N* 19” 82” CDH3-0183N* 45’’-47’’ 27” 100”
CDH3-0159N* 39’’ 19” 88” CDH3-0184N* 48’’-49’’ 27” 100”
CDH3-0160N* 40’’-41’’ 19” 94” CDH3-0185N* 27” 106”
CDH3-0161N* 42’’-44’’ 19” 100” CDH3-0186N* 50’’ 31” 64”
CDH3-0162N* 45’’-47’’ 19” 100” CDH3-0187N* 51’’-54’’ 31” 70”
CDH3-0163N* 48’’-49’’ 19” 106” CDH3-0188N* 30’’-32’’ 31” 70”
CDH3-0164N* 23” 64” CDH3-0189N* 31” 76”
CDH3-0165N* 50’’ 23” 70” CDH3-0190N* 33’’ 31” 82”
CDH3-0166N* 51’’-54’’ 23” 82” CDH3-0191N* 34’’-35’’ 31” 82”
CDH3-0167N* 30’’-32’’ 23” 88” CDH3-0192N* 36’’-38’’ 31” 88”
CDH3-0168N* 23” 94” CDH3-0193N* 31” 94”
CDH3-0169N* 33’’ 23” 100” CDH3-0194N* 39’’ 31” 100”
CDH3-0170N* 40’’-41’’ 23” 100” CDH3-0195N* 40’’-41’’ 31” 100”
CDH3-0171N* 42’’-44’’ 23” 106” CDH3-0196N* 42’’-44’’ 31” 106”
CDH3-0172N* 45’’-47’’ 23” 70” CDH3-0197N* 45’’-47’’ 35” 64”
CDH3-0173N* 48’’-49’’ 23” 76” CDH3-0198N* 48’’-49’’ 35” 70”
CDH3-0174N* 23” 82” CDH3-0199N* 35” 70”
CDH3-0175N* 50’’ 27” 64” CDH3-0200N* 50’’ 35” 76”
CDH3-0176N* 51’’-54’’ 27” 70” CDH3-0201N* 51’’-54’’ 35” 82”
CDH3-0177N* 34’’-35’’ 27” 70” CDH3-0202N* 30’’-32’’ 35” 82”
36’’-38’’
33’’
39’’ 34’’-35’’
30’’-32’’ 36’’-38’’

33’’ 39’’
34’’-35’’ 40’’-41’’

164 (*) Special Engineering Required

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT
Car Door Hanger Assemblies

Center Parting - Conventional - Type “A” Car Door Hanger
Assemblies
15” Header (Ungeared) - Arranged for High Cab

Part No. C/P Hi-Cab Header Track Length Part No. C/P Hi-Cab Header Track Length
CDH3-0203N* 42’’-44’’ 35” 88” CDH3-0217N* 50’’ 39” 100”
CDH3-0204N* 45’’-47’’ 35” 94” CDH3-0218N* 51’’-54’’ 39” 106”
CDH3-0205N* 48’’-49’’ 35” 100” CDH3-0219N* 30’’-32’’ 43” 64”
CDH3-0206N* 35” 100” CDH3-0220N* 33’’ 43” 70”
CDH3-0207N* 50’’ 35” 106” CDH3-0221N* 34’’-35’’ 43” 70”
CDH3-0208N* 51’’-54’’ 39” 64” CDH3-0222N* 36’’-38’’ 43” 76”
CDH3-0209N* 30’’-32’’ 39” 70” CDH3-0223N* 39’’ 43” 82”
CDH3-0210N* 39” 70” CDH3-0224N* 40’’-41’’ 43” 82”
CDH3-0211N* 33’’ 39” 76” CDH3-0225N* 42’’-44’’ 43” 88”
CDH3-0212N* 34’’-35’’ 39” 82” CDH3-0226N* 45’’-47’’ 43” 94”
CDH3-0213N* 36’’-38’’ 39” 82” CDH3-0227N* 48’’-49’’ 43” 100”
CDH3-0214N* 39” 88” CDH3-0228N* 50’’ 43” 100”
CDH3-0215N* 39’’ 39” 94” CDH3-0229N* 51’’-54’’ 43” 106”
CDH3-0216N* 40’’-41’’ 39” 100”
42’’-44’’
45’’-47’’
48’’-49’’

15”, 17” Header (Vertical Geared)

Part No. C/P Header Height Track Length
CDH3-0248N* 30”-32” 15” 64”
CDH3-0249N* 33’’-35’’ 15” 70”
CDH3-0250N* 36’’-38’’ 15” 76”
CDH3-0251N* 39’’-41’’ 15” 82”
CDH3-0252N* 42’’-44’’ 15” 88”
CDH3-0253N* 45’’-47’’ 15” 97”
CDH3-0254N* 48’’-49’’ 15” 100”
CDH3-0257N* 17” 100”
CDH3-0255N* 50’’ 17” 106”
CDH3-0256N* 51’’-56’’ 17” 112”
57’’-59’’

(*) Special Engineering Required 165

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

Car Door Hanger DOOR EQUIPMENT
Assemblies Car Door Hanger Assemblies

Center Parting - Conventional - Type “A”

Hi-Cab Kit

166 (*) Special Engineering Required

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT
Car Door Hanger Assemblies

Center Parting - Conventional - Type “A” Car Door Hanger
Assemblies
Hi-Cab Kit

Note: CDH1-0104N is a HI-Cab kit, 4” channel

Part No. C/P Header Height Plate “P” DIM Part No. C/P Header Height Plate “P” DIM
CDH1-0104N* 32”-73” 19” - CDH3-0043N* 30”-32” 35” 21 1/2”
CDH3-0023N* 30”-32” 23” CDH3-0044N* 33”-33” 35” 21 1/2”
CDH3-0024N* 33”-33” 23” 9 1/2” CDH3-0045N* 34”-39” 35” 21 1/2”
CDH3-0027N* 34”-39” 23” 9 1/2” CDH3-0046N* 40”-44” 35” 21 1/2”
CDH3-0028N* 40”-44” 23” 9 1/2” CDH3-0047N* 45”-49” 35” 21 1/2”
CDH3-0029N* 45”-49” 23” 9 1/2” CDH3-0048N* 50”-54” 35” 21 1/2”
CDH3-0030N* 50”-54” 23” 9 1/2” CDH3-0049N* 30”-32” 39” 25 1/2”
CDH3-0031N* 30”-32” 27” 9 1/2” CDH3-0050N* 33”-33” 39” 25 1/2”
CDH3-0032N* 33”-33” 27” 13 1/2” CDH3-0051N* 34”-39” 39” 25 1/2”
CDH3-0033N* 34”-39” 27” 13 1/2” CDH3-0052N* 40”-44” 39” 25 1/2”
CDH3-0034N* 40”-44” 27” 13 1/2” CDH3-0053N* 45”-49” 39” 25 1/2”
CDH3-0035N* 45”-49” 27” 13 1/2” CDH3-0054N* 50”-54” 39” 25 1/2”
CDH3-0036N* 50”-54” 27” 13 1/2” CDH3-0055N* 30”-32” 43” 29 1/2”
CDH3-0037N* 30”-32” 31” 13 1/2” CDH3-0056N* 33”-33” 43” 29 1/2”
CDH3-0038N* 33”-33” 31” 17 1/2” CDH3-0057N* 34”-39” 43” 29 1/2”
CDH3-0039N* 34”-39” 31” 17 1/2” CDH3-0058N* 40”-44” 43” 29 1/2”
CDH3-0040N* 40”-44” 31” 17 1/2” CDH3-0059N* 45”-49” 43” 29 1/2”
CDH3-0041N* 45”-49” 31” 17 1/2” CDH3-0060N* 50”-54” 43” 29 1/2”
CDH3-0042N* 50”-54” 31” 17 1/2”
17 1/2”

Less Header (Ungeared)

Part No. C/P Track Length Part No. C/P Track Length
CDH3-0231N 30’’-32’’ 64” CDH3-0236N 45’’-47’’ 94”
CDH3-0232N 33’’-35’’ 70” CDH3-0237N 48’’-50’’ 100”
CDH3-0233N 36’’-38’’ 76” CDH3-0238N 51’’-56’’ 106”
CDH3-0234N 39’’-41’’ 82” CDH3-0239N 57’’-59’’ 112”
CDH3-0235N 42’’-44’’ 88”

Center Parting - Dust/Explosion Resistant - Type “AX”

15”, 17” Header (Ungeared)

Part No. C/P Header Height Track Length
CDH3-0271N* 30’’-32’’ 15” 64”
CDH3-0272N* 33’’-35’’ 15” 70”
CDH3-0273N* 36’’-38’’ 15” 76”
CDH3-0274N* 39’’-41’’ 15” 82”
CDH3-0275N* 42’’-44’’ 15” 88”
CDH3-0276N* 45’’-47’’ 15” 94”
CDH3-0277N* 48’’-49’’ 15” 100”
CDH3-0278N* 17” 100”
CDH3-0279N* 50’’ 17” 106”
CDH3-0280N* 51’’-54’’ 17” 106”
CDH3-0281N* 55’’-56’’ 17” 112”
57’’-59’’

Ungeared - Arranged for High Cab

Note: Dust/explosion resistant C/P car door hangers are the same as conventional C/P car door hangers arranged for high cab kit.
Refer to Conventional- Center Parting - Arranged for High Cab – Type “A” table

(*) Special Engineering Required 167

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT
Car Door Hanger Assemblies

Car Door Hanger Center Parting - Water Resistant - Type “AW”
Assemblies
15”, 17” Header (Ungeared)

Note: All ferrous material are yellow zinc dichromate plated

Part No. C/P Header Height Track Length
CDH21-0001N* 30’’-32’’ 15” 64”
CDH21-0002N* 15” 70”
CDH21-0004N* 33’’ 15” 76”
CDH21-0005N* 36’’-38’’ 15” 82”
CDH21-0007N* 15” 88”
CDH21-0008N* 39’’ 15” 94”
CDH21-0009N* 42’’-44’’ 15” 100”
CDH21-0010N* 45’’-47’’ 17” 100”
CDH21-0011N* 48’’-49’’ 17” 106”
CDH21-0012N* 17” 106”
CDH21-0013N* 50’’ 17” 112”
51’’-54’’
55’’-56’’
57’’-59’’

17”, 19” Header (Ungeared) - Split Hangers

Note: All ferrous material are yellow zinc dichromate plated

Part No. C/P Header Height Track Length
CDH21-0014N* 60’’-62’’ 17” 117”
CDH21-0015N* 63’’-64’’ 17” 129”
CDH21-0016N* 65’’-68’’ 19” 129”
CDH21-0017N* 69’’-74’’ 19” 141”
CDH21-0018N* 75’’-80’’ 19” 153”
CDH21-0019N* 81’’-83’’ 19” 165”

Less Header (Ungeared)

Note: Contact G.A.L Sales or Engineering Department for center parting ungeared hangers.

Center Parting - Vandal Resistant - Type “A”

Ungeared

Note: Vandal resistant C/P ungeared car door hangers are the same as conventional C/P car door hangers ungeared – type “A”
Refer to Conventional-Center Parting - Ungeared - 15”, 17” Header - Type “A” table

Ungeared - Split Hangers

Note: Vandal resistant C/P ungeared – split car door hangers are the same as conventional C/P car door hangers ungeared – split hangers
- type “A”
Refer to Conventional - Center Parting - Ungeared – Split Hangers – Type “A” for 17” header D.O 60”-64”, and 19” header D.O 65”-83”
table

Vertical Geared

Note: Vandal resistant C/P vertical geared car door hangers are the same as conventional C/P car door hangers vertical geared – type “A”
Refer to Conventional- Center Parting – Vertical Geared -15”, 17” Header Geared – Type “A” table

Arranged for High Cab

Note:
Refer to Conventional- Center Parting (Arranged for High Cab - Type “A”) for HI-Cab Kit arrangement hangers for vandal resistant purpose.

168 (*) Special Engineering Required

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT
Car Door Hanger Assemblies

Center Parting - Vandal Resistant - Type “A” Car Door Hanger
Assemblies
Less Header (Ungeared)

Note: Vandal resistant C/P less header car door hangers are the same as conventional C/P less header car door hangers – type “A”
Refer to Conventional - Center Parting - Ungeared - Less Header – Type “A” table

Two Speed Center Parting - Conventional - Type “A”

15”, 17”, 19” Header (Ungeared)

Part No. 2SP/CP Header Height Track Length
CDH4-0138N* 32’’ 15” 61”
CDH4-0001N* 15” 61”
CDH4-0002N* 33’’-34’’ 15” 61”
CDH4-0003N* 35’’ 15” 64”
CDH4-0004N* 15” 67”
CDH4-0005N* 36’’-38’’ 15” 67”
CDH4-0006N* 39’’ 15” 70”
CDH4-0007N* 15” 73”
CDH4-0008N* 40’’-41’’ 15” 76”
CDH4-0009N* 42’’-44’’ 17” 79”
CDH4-0010N* 45’’-47’’ 17” 82”
CDH4-0011N* 48’’-49’’ 17” 85”
CDH4-0012N* 50’’-51’’ 17” 85”
CDH4-0013N* 52’’-53’’ 17” 88”
CDH4-0014N* 17” 91”
CDH4-0015N* 54’’ 17” 94”
CDH4-0016N* 55’’ 17” 97”
CDH4-0017N* 56’’-57’’ 17” 100”
CDH4-0018N* 58’’-59’’ 19” 100”
CDH4-0019N* 60’’-61’’ 19” 103”
CDH4-0020N* 62’’-63’’ 19” 106”
CDH4-0021N* 64’’ 19” 109”
CDH4-0022N* 65’’ 19” 112”
66’’-67’’
68’’-69’’
70’’-71’’
72’’-73’’

Geared - Split Hangers

19” Header
Note: Geared fast to slow car doors

Part No. 2SP/CP Track Length
CDH4-0108N* 74’’-83’’ 116 1/2”
CDH4-0113N* 84’’-89’’ 120 1/2”
CDH4-0114N* 90’’-98’’ 128 1/2”

Hi-Cab Kit 169

Note: Contact G.A.L Sales or Engineering Department for two speed center parting high cab kits.
Advise opening size, and cab height

(*) Special Engineering Required

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT
Car Door Hanger Assemblies

Car Door Hanger Two Speed Center Parting - Conventional - Type “A”
Assemblies
Less Header (Ungeared) 2SP/CP Track Length
33’’-35’’ 61”
Less Header 36’’-38’’ 64”
39’’-41’’ 67”
Part No. 42’’-44’’ 70”
CDH4-0115N* 45’’-47’’ 73”
CDH4-0116N* 48’’-49’’ 76”
CDH4-0117N* 50’’-51’’ 79”
CDH4-0118N* 52’’-53’’ 82”
CDH4-0119N* 54’’-55’’ 85”
CDH4-0120N* 56’’-57’’ 88”
CDH4-0121N* 58’’-59’’ 91”
CDH4-0122N* 60’’-61’’ 94”
CDH4-0123N* 62’’-63’’ 97”
CDH4-0124N* 64’’-65’’ 100”
CDH4-0125N* 66’’-67’’ 103”
CDH4-0126N* 68’’-69’’ 106”
CDH4-0127N* 70’’-71’’ 109”
CDH4-0128N* 72’’-73’’ 112”
CDH4-0129N*
CDH4-0130N*
CDH4-0131N*
CDH4-0132N*

Two Speed Center Parting - Dust/Explosion Resistant - Type “AX”

Ungeared

Note: Contact G.A.L Sales or Engineering Department for two speed center parting ungeared hangers.

Two Speed Center Parting - Water & Vandal Resistant - Type “AW” & “HA”

Geared - Split Hangers

Note: All Ferrous Material Yellow Zinc Dichromate Plated
Contact G.A.L Sales or Engineering Department for two speed center parting ungeared, geared, geared-split, and vandal & water resistant
hangers.

Three Speed Center Parting - Conventional - Type “A”

Geared Geared - Split Hangers

Note: Contact G.A.L Sales or Engineering Department for three Note: Contact G.A.L Sales or Engineering Department for three
speed center parting geared hangers. speed center parting geared –split hangers.

170 (*) Special Engineering Required

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT Hatch Door Hanger
Hatch Hanger Isometric Drawing Assemblies

Single Speed - Type “A”

22”-48” Door Opening

Part No. Item No Description Part No. Item No Description
1C Roller Kit, 3 1/4” Dia “A” (Page# 224)
HH1-0105L/R 1 Sheave, 4-1/8 CL With 3/8-16 Bolts Top HH1-0025N 2 Bumper, “A” CP Stop (Page# 236)
Safety Retainer (Page# 221) HH4-0055N 3 Track, S/S Hatch Door (Page# 231)
HH1-0112N 1A Retainer, Hanger Top Safety (Page# 225) HH1-XXXXX
HH1-0024N 1B Eccentric, “A” Sheave (Page# 225)

Mounting hardware included with this operator assembly (Page# 242-244)

NOTE: Isometric drawings should be used for reference only (See parts sections for details) 171

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

Hatch Door Hanger DOOR EQUIPMENT
Assemblies Hatch Hanger Isometric Drawing

Two Speed (Ungeared) - Type “A”

24”-72” Door Opening

Part No. Item No Description Part No. Item No Description

HH1-0105L/R 1 Sheave, 4-1/8 CL With 3/8-16 Bolts and Top Plate, MO Keeper Mounting 2SP & 2/SP HA
Safety Retainer (Page# 221) 6 30-72 D.O. 3/SP 41-69 D.O. 2SP/CP 58-83
HH1-0112N 1A Retainer, Hanger Top Safety (Page# 225) INT1H-0037N D.O. (Page# 371-Interlock Section)
HH1-0024N 1B Eccentric, “A” Sheave (Page# 225) Plate, MO Keeper Mounting, 2SP/CP 54-57
HH1-0025N 1C Roller Kit, 3 1/4” Dia “A” (Page# 224) INT1H-0040N 7 D.O. (Page# 371-Interlock Section)
HH4-0055N HH2-XXXXX
HH2-0052L/R 2 Bumper, “A” CP Stop (Page# 236) HH2-XXXXX 8 Track, Slow Hatch Door (Page# 232)
HH2-0053N 3 Bracket, Track End 1 1/2” (Page# 236) HH2-XXXXX 9 Track, Fast Hatch Door (Page# 232)
HH2-0054N 4 Bracket, Track Top 1 1/2” (Page# 235) Mechanical Interconnecting Device Set
5 Angle, Track Bottom 1 1/2” (Page# 235) 10 (Page# 217)

Mounting hardware included with this operator assembly (Page# 242-244)

172 NOTE: Isometric drawings should be used for reference only (See parts sections for details)

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT Hatch Door Hanger
Hatch Hanger Isometric Drawing Assemblies

Two Speed (Geared) - Type “A”

22”-48” Door Opening

Part No. Item No Description Part No. Item No Description

HH1-0105L/R 1 Sheave, 4-1/8 CL With 3/8-16 Bolts and Top HH2-0054N 6 Angle, Track Bottom 1 1/2” (Page# 235)
Safety Retainer (Page# 221) Sheave, 2SP Cable Gearing Bar and Top
HH1-0112N 1A Retainer, Hanger Top Safety (Page# 225) HH2-0208L/R 7 Safety Retainers (Page# 223)
HH1-0024N
HH1-0025N 1B Eccentric, “A” Sheave (Page# 225) CDH2-0082N 8 Clamp, 2SP Cable Anchor (Page# 213)
1C Roller Kit, 3 1/4” Dia “A” (Page# 224) CDH2-XXXXX 9 Bar Assembly, Cable Gearing (Page# 210)
HH2-0206L/R Sheave, 2SP Cable Gear and Top Safety HH2-XXXXX 10 Track, Slow Hatch Door (Page# 232)
2 Retainers (Page# 223) HH2-XXXXX 11 Track, Fast Hatch Door (Page# 232)
HH4-0055N
HH2-0052L/R 3 Bumper, “A” CP Stop (Page# 236) HH2-XXXXX 12 Mechanical Interconnecting Device Set
HH2-0053N 4 Bracket, Track End 1 1/2” (Page# 236) (Page# 217)
5 Bracket, Track Top 1 1/2” (Page# 235)

Mounting hardware included with this operator assembly (Page# 242-244)

NOTE: Isometric drawings should be used for reference only (See parts sections for details) 173

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

Hatch Door Hanger DOOR EQUIPMENT
Assemblies Hatch Hanger Isometric Drawing

Three Speed (Ungeared) - Type “A”

30”-69” Door Opening

Part No. Item No Description Part No. Item No Description

HH1-0105L/R 1 Sheave, 4-1/8 CL With 3/8-16 Bolts and Top HH2-0054N 5 Angle, Track Bottom 1 1/2” (Page# 235)
Safety Retainer (Page# 221) HH9-XXXXX 6 Track, Slow Hatch Door (Page# 233)
HH1-0112N 1A Retainer, Hanger Top Safety (Page# 225) Track, Intermediate Hatch Door
HH1-0024N 1B Eccentric, “A” Sheave (Page# 225) HH9-XXXXX 7 (Page# 233)
HH1-0025N
HH2-0052L/R 1C Roller Kit, 3 1/4” Dia “A” (Page# 224) HH9-XXXXX 8 Track, Fast Hatch Door (Page# 233)
HH2-0053N 3 Bracket, Track End 1 1/2” (Page# 236) Mechanical Interconnecting Device Set
4 Bracket, Track Top 1 1/2” (Page# 235) HH2-XXXXX 9 (Page# 217)

Mounting hardware included with this operator assembly (Page# 242-244)

174 NOTE: Isometric drawings should be used for reference only (See parts sections for details)

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

DOOR EQUIPMENT

Hatch Hanger Isometric Drawing Hatch Door Hanger
Assemblies
Center Parting - Type “A”

30” & Up Door Opening

Part No. Item No Description Part No. Item No Description
2 Bumper, “A” CP Stop (Page# 236)
HH1-0105L/R 1 Sheave, 4-1/8 CL With 3/8-16 Bolts and Top HH4-0055N Plate, MO Keeper Mounting 2SP & 2/SP HA
Safety Retainer (Page# 221) INT1H-0037N 3 30-72 D.O. 3/SP 41-69 D.O. 2SP/CP 58-83
HH1-0112N 1A Retainer, Hanger Top Safety (Page# 225) HH3-XXXXX D.O. (Page# 371-Interlock Section)
HH1-0024N 1B Eccentric, “A” Sheave (Page# 225) 4 Track, C/P Hatch Door (Page# 234)
HH1-0025N 1C Roller Kit, 3 1/4” Dia “A” (Page# 224)

Mounting hardware included with this operator assembly (Page# 242-244)

NOTE: Isometric drawings should be used for reference only (See parts sections for details) 175

Phone: 1-877-425-3538 Fax: 1-718-292-2034 G.A.L. Manufacturing

Hatch Door Hanger DOOR EQUIPMENT
Assemblies Hatch Hanger Isometric Drawing

Center Parting (Geared) - Type “A”

30”-59” Door Opening

Part No. Item No Description Part No. Item No Description

HH1-0105L/R 1 Sheave, 4-1/8 CL With 3/8-16 Bolts and Top Plate, MO Keeper Mounting, 2/SP HA 37-72
Safety Retainer (Page# 221) INT1H-0038L/R 3 D.O. C/P 33-59 D.O.
HH1-0112N 1A Retainer, Hanger Top Safety (Page# 225) (Page# 371-Interlock Section)
HH1-0024N 1B Eccentric, “A” Sheave (Page# 225) Plate, MO Keeper Mounting, For C/P 30-32
HH1-0025N 1C Roller Kit, 3 1/4” Dia “A” (Page# 224) INT1H-0039N 4 D.O. (Page# 371-Interlock Section)

HH3-0034L/R 2 Sheave, 4-1/8 CL With 3/8-16 Bolts and Top HH3-XXXXX 5 Track, C/P Hatch Door (Page# 234)
Safety Retainer (Page# 221) Pulley Assembly, CP Nylon Tension
HH3-0042L/R 6 (Replacement) (Page# 211)
Mounting hardware included with this operator assembly
(Page# 242-244) HH3-XXXXX 7 Gearing Cable (Page# 212)

176 NOTE: Isometric drawings should be used for reference only (See parts sections for details)