2019 Resource Guide

2019 resource guide

New Arrivals

LN-25 WIRE FEEDER FIXED VELOCITY GAS BURNING STATIONS
THICKNESS GAUGE

Page 15 Page 25 Page 25
WELD TEST CONNEX
PNEUMATIC ELECTRIC AIR
AIR COMPRESSORS COMPRESSOR

Page 26 Page 32 Page 33
AIR LIFTING BAGS
PNEUMATIC HYDRAULIC BOLT TENSION
TORQUE WRENCH PUMPS CALIBRATOR

Page 51 Page 61 Page 76

2

Stay up to Date at 877.446.4352

www.superiortoolrental.com/new-arrivals

CONSTRUCTION HEATERS 1060 & 400 GALLON RIDGID PRO PRESS
AIR MANIFOLD TANKS BOOSTER KIT

Page 115 Page 127 Page 140
BAND BEVELER RAIL SAW
BEAM PIPE
CLAMP ROLLER

Page 142 Page 149 Page 154

RAIL DRILL PNEUMATIC
MAGNET DRILL PRESS

877.446.4352 Page 154 Page 163 3

www.superiortoolrental.com www.midlandtool.com

Your Powerful Industrial
Supply Team

Founded in 1962, Midland Tool & Supply served the piping, threading, and electrical industries for 20 years, before
broadening our product lines and becoming a "one stop shop" for the industrial construction industry. In 1995 – after
identifying a need in the industrial construction sector for rental equipment and repair – our company's President,
Brian Boychuk, expanded the business again and founded Superior Tool Rental & Repair.
Today, Midland Tool & Supply and Superior Tool Rental & Repair work together to provide construction firms
high-quality tools, equipment, job-site supplies, repairs, rentals, and many other unique services. Our vision is to
cultivate a knowledgeable and innovative staff, that is prepared to respond to customers in a reliable manner,
consistently exceeding their expectations.

24/7/365 Support Onsite Tool Trailers (p.6) Repair & Warranty Service (p.8) Equipment Rental (p.10)

Weld Test Conex (p.26) Mobile Bolting (p.56) Testing, Calibration & Certification (p.28)

4

Shipping

FAST DELIVERY, NATIONWIDE

If you need it today, our trucks are out the door, headed your way:
• Semi-Tractors
• Semi Flat Bed Trailers
• Enclosed Semi Trailers
• Stake Trucks
• Box Trucks
• Pickup Trucks

• FedEx Freight
• FedEx Ground

877.446.4352 www.superiortoolrental.com www.midlandtool.com 5

On-Site Tool Trailer Service

E-track hanger posts Heavy-duty steel Flammable storage unit Labeled, stackable Clearly labeled
for stingers, grounds, containers storage bins bin locations
air whip hose,
and slings

Spacious work
table w/shelving

Inventory
management
work station

iPad with MarginPoint®
barcoding and inventory replenishment software

6

OVERVIEW

Midland Tool & Supply can provide large construction projects (outages, shutdowns and turnarounds) with on-site
tool trailers. Our tool trailers ensure that high demand needs can be immediately met by providing:
• Customizable inventory
• 24/7 onsite access
• Unlimited users

Just like our warehouse, our tool trailers are exceptionally organized. Each is equipped with:
• Efficient shelving
• Stackable plastic bins
• Sufficient overhead lighting
• Clearly labeled bin locations
• E-track hanger posts for air hose whips, stingers, grounds, and slings
• A spacious worktable
• A workstation with a cellular enabled iPad
• SDS sheets on site

INVENTORY MANAGEMENT

Our tool trailers are equipped with MarginPoint® barcoding and inventory replenishment software, which can be accessed via a cellular
enabled iPad the workstation. MarginPoint provides several features that increase efficiency, accuracy, and reporting on the job-site:
• Barcode and QR scanning of products as they are pulled from the shelves
• Immediate inventory updating
• Instant processing of inventory replenishment requests, ensuring prompt restocking
• Bin mapping for quick product location
• Searchable inventory
• Product photos
• App compatibility with iOS or Android-enabled smartphones
• Cellular iOS tablet (iPad) included
• Customizable usage and expense reporting, including categorizes such as:

Issuer, shift, product category, trade, sub-contractor,
and etc. Reports can be programmed to automatically
send via email to anyone you chose and for date range.

877.446.4352 www.superiortoolrental.com www.midlandtool.com 7

Customer Repairs

REPAIRS CUSTOMER PORTAL
We can provide documentation for repairs, calibrations, tests, and
certifications. Our experts are trained to repair the following: We track all repairs using specialized software,
• Electric Power Tools • Conduit Benders providing customers a portal for:
• Battery Power Tools • Cable Pullers • Checking repair status
• Pneumatic Tools • Mag Drills • Reviewing, approving and declining repair estimates
• Hydraulic Cylinders • Generators • Accessing invoice history
• Hydraulic Pumps • Welders • Downloading invoice and ticket PDFs

• Pipe Machines

TECHNOLOGIES

• A Skidmore testing station, for use with 1/2" to 2-1/2" drive pneumatic impact wrenches (Bottom right)
• A 100-ton hydraulic test stand, for use with all hydraulic cylinders (Bottom center)
• A manual chain and lever hoist test stand, for repair, certification and tagging (Bottom left)
• A manual torque wrench tester, powered by Norbar
• A hydraulic torque wrench tester, powered by Norbar
• An air hoist test stand, for testing and certification of 1/4 to 60 ton manual and air hoists
• Welder calibration and certification equipment

8

Warranty Service

Superior Tool Rental & Repair is an authorized warranty service center for all of the following brands:
Superior Tool Rental & Repair is an authorized warranty service center for all of the following brands:

877.446.4352 www.superiortoolrental.com www.midlandtool.com 9

Our Rental Fleet & Repair Facilities

Our rental fleet is comprised of the most up-to-date tools and equipment on the market, from the leading manufacturers in the
industry. To ensure end-user safety and lasting performance, our experts inspect, re-touch, paint, test, calibrate, and certify each
piece of equipment, both before and after rental. We own the following equipment and technologies:
• A Skidmore testing station, for use with 1/2" to 2-1/2" drive pneumatic impact wrenches
• A 100-ton hydraulic test stand, for use with all hydraulic cylinders
• A manual chain and lever hoist test stand, for repair, certification and tagging
• A manual torque wrench tester, powered by Norbar
• A hydraulic torque wrench tester, powered by Norbar
• An air hoist test stand, for testing and certification of 1/4 to 60 ton manual and air hoists
• Welder calibration and certification equipment
When our rentals are not in use, they are thoughtfully stored and organized in our warehouse. When our rentals are on the job, they
are easily identifiable by engravings and stickers, which create a quick accountability method in the yard.

10

Welders, Plasma Cutters & Accessories

877.446.4352 www.superiortoolrental.com www.midlandtool.com 11

Inverters

Maxstar® 161 S 120V / 240V Portable Stick Welder

FEATURES

Allows for any input voltage hookup (120–240V) with no manual linking, providing convenience in any
job setting. Ideal solution for dirty or unreliable power.

SPECIFICATIONS

Applications Maintenance & Repair 13 lbs.
Processes Stick (SMAW)
Weldable Metals
Current Type Stainless Steel, Steel
Weld Output DC
Dimensions / Weight CC

H 10.3" x W 5.6" x D 13.5" /

WELD SPECIFICATIONS

907709 Input Welding Rated Output Amps Input at Rated KVA at KW Max. Open-
*Sense Voltage for Stick. Power Amperage Range Output, 50/60 Hz Duty Cycle Circuit Voltage
120 V, 60 A at 22.4 VDC, 100 duty cycle 14.68 1.71
20 A 20-90 A 90 A at 23.6 VDC, 30% duty cycle 23.16 1.75 2.76 48 VDC
110 A at 24.4 VDC, 100% duty cycle 14.31 2.78 3.30 (12–16 VDC*)
240 V 20-160 A 160 A at 26.4 VDC, 20% duty cycle 22.55 3.43 5.25
5.41

Maxstar® STR 210 120-480V Stick Welder

FEATURES

Unit provides maximum flexibility by automatically connecting to any input power while maintaining the
best DC stick welding performance in its product class.

SPECIFICATIONS

Applications Fabrication, Maintenance & Repair, Shipbuilding, Work / Service Trucks
Processes Stick (SMAW), TIG (GTAW), TIG DC (GTAW-DC)
Weldable Metals Stainless Steel, Steel
Current Type DC
Weld Output CC
Dimensions / Weight H 13.6" x W 8.6" x D 19.5" / 36 lbs.

WELD SPECIFICATIONS

907682 Welding Input Welding Amps input at Rated Load Output, 50/60 Hz Max, Open-
Mode Power Amp. Range Rated Output Phase 120 V 208 V 240 V 400 V 480 V KVA KW Circuit Voltage
210 A at 18.4 V, 3-phase
208–480 V 1–210 A 60% duty cycle 1-phase – 14 12 7 6 5.2 4.9 80 VDC
TIG (GTAW) 1–210 A 125 A at 15 V, – 24 20 12 10 4.9 4.9 (11 VDC)
60% duty cycle 1-phase
120 V 22 – – – – 2.6 2.6
3-phase
208–480 V 5–210 A 160 A at 26.4 V, 1-phase – 15 13 8 6 5.5 5.2
Stick (SMAW) 5-100 A 60% duty cycle – 26 22 13 11 5.3 5.3
90 A at 23.6 V, 1-phase
120 V 60% duty cycle 23 – – – – 2.8 2.8

12

Inverters

Invertec® V275-S Welder with Tweco® Style Receptacle

FEATURES

• Outstanding AWS E6010 and E7018 performance: Up to 7/32" diameter electrode
that enables both whip and drag techniques

• Touch Start TIG®: The welding arc to be established without high frequency starting
• Air carbon arc cutting and gouging: with up to 3/16" diameter carbon electrode
• Selectable Hot Start: Turn it off for thin material or flip it on for thick, rusty or dirty material
• Variable Arc Force: Dial in the “soft” or “crisp” arc you want

K2269-3

SPECIFICATIONS Construction, Fabrication, Maintenance and Repair
Applications Gouging, Stick (SMAW), TIG (GTAW)
Processes 220 / 380 / 400 / 415 / 440 / 3 / 50 220 / 380 / 400 / 415 / 440 / 1 / 50
Input Power 250A / 30V / 35% 200A / 28V / 100%
Rated Output 32/20/19/18/17A 25/15/15/14/13A 63/42/40/38/36A 48/32/30/29/27A
Input Current at Rated Output CC, DC
Weld Output 5-275 A
Output Range H 13.6" W 9" D 20.25" / 54.5 lbs.
Dimensions / Weight

Flextec® 350X Multi Process Welder with Crosslinc™

FEATURES

• Streamlined operator panel minimizes setup time
• Components designed to run cool for long life in high temperature environments
• Compatible with across-the-arc, analog, digital or CrossLinc™ feeders
• CrossLinc™ Technology: Full functionality without control cables

SPECIFICATIONS K4271-1
Applications Fabrication, Offshore, Pipeline, Power Generation, Shipbuilding, Structural
Processes Arc Gouging, Flux-Cored (FCAW), MIG (GMAW), Stick (SMAW), TIG DC (GTAW-DC)
Input Power
Rated Output 380 / 460 / 575 / 3 / 50 / 60
Input Current at Rated Output 300A / 32V / 100% 350A / 34V / 60%
Output Range
Weld Output 26 / 23 / 18
Dimensions / Weight 5-425 A Max OCV 80V DC

CC/CV, DC
H 17" W 13" D 23" / 77 lbs.

4 Pack Flextec® 350X Multi Process Welders with Crosslinc™

SPECIFICATIONS Tweco
Out Connection 380 / 460 / 575 / 3 / 50 / 60
Rack Input Power {1} 350A / 34V / 60% 300A / 32V / 100%
Rated Output Current/Voltage/Duty Cycle
Rack Input Current @ Rated Output 74/68/68
Output Range 5-425 A
Dimensions / Weight H 59.72" W 37.5" D 32.88" / 620 lbs.

Crosslinc™ Remote

Processes Stick (SMAW), TIG (GTAW), MIG (GMAW),
Compatibility Flux Cored Arc Welding (FCAW)
Dimensions/Weight With CrossLinc equipped Flextec® welders
H 7.75" W 10.0" D 4.5" / 10 lbs.

K4345-1 K3402-1

4 Pack Rack Flextec® 350X

877.446.4352 www.superiortoolrental.com www.midlandtool.com 13

Inverters

Flextec® 650X Multi Process Welder with CrossLinc™

FEATURES

• Use with a wide range of available 3 phase input power
• Easy one-knob process selection
• Components designed to run cool for long life in high temperature environments

SPECIFICATIONS
Applications Fabrication, Heavy Fabrications, Offshore, Pipline, Power Generation, Shipbuilding, Structural
Processes Flux-Cored (FCAW), Gouging, MIG (GMAW), Stick (SMAW), Submerged Arc (SAW), TIG (GTAW)
Input Power 380/460/575/3/50/60
Rated Output
Input Current @ 750A/44V/60% 650A/44V/100%
Rated Output
K3425-1 61/50/40 57/47/38

Output Range 10-815 A
Weld Output CC/CV, DC
Dim. / Weight H 21.8" W 16.1" D 29.3" / 165 lbs

4 Pack Rack Flextec® 650X Multi Process Welders with CrossLinc™

SPECIFICATIONS Tweco®
Output Connection 380/460/575/3/50/60
Rack Input Power 650A / 44V / 100% 750A / 44V/60%
Rated Output 202 / 167 / 105A
Rack Input Current @ Rated Output 10-815 Amps
Output Range H 71.22" W 36" D 35.5" / 950 lbs.
Dimensions / Weight
Crosslinc™ Remote

K3144-1 Processes Stick (SMAW), TIG (GTAW), MIG (GMAW), K4345-1
Flextec 650 4-Pack Rack Compatibility Flux Cored Arc Welding (FCAW)
Dimensions/Weight With CrossLinc equipped Flextec® welders
H 7.75" W 10.0" D 4.5" / 10 lbs.

Multi-Weld

Multi-Weld® 350 Multi Operator Welder

K1735-1 FEATURES

• Connect several DC+ welders to one power supply
• Independent Arcs: Starting or stopping one Multi-Weld doesn’t affect the welding of the others
• The Multi-Weld 350 is capable of continuous operation at 350 amps in 122°F air temperature
• No control cables are needed: Single weld cable output from the power source

to one or several Multi-Weld 350s.
• Controls are located close to the operator for quick access

SPECIFICATIONS Stick, Mig, Flux-Cored, Gouging
Processes CC/CV, DC
Weld Volts
Input Volts 80V DC (50-113 Peak Range)
Rated Output (Current/Voltage/Duty Cycle) 350A / 34V / 100% DC+
Input Current at Rated DC Output (80 VDC) 165 A
Output Range
Dimensions / Weight 15-40 Volts, 30-350 amps, Max. OCV: 78V
H 11.6" W 10" D 21.5" / 59 lbs.

Distribution Box FEATURES
K1736-1
• Makes connecting up to 5 Multi Weld® 350s quick and easy
• Contains copper bus bar for connecting multiple “pig-tails”
• Four “pig tails” included
• Dimensions / Weight: H 6.5" W 20" D 17" / 11 lbs.

14

Mig Feeders

LN-25X MIG Feeder with CrossLinc™ LN-25 MIG Feeder

FEATURES FEATURES
• For MIG and flux-cored arc welding
• Full control of your system with no processes using up to 44 lb. spools
control cables • Designed for solid, cored and
aluminum wire sizes
• Remotely controls preset voltage • Selectable dial for setting low or
without a control cable high range wire feed speed
• Includes DC voltmeter, voltmeter
• Industry-proven Maxtrac® wire drive polarity switch, arc sensing lead,
system provides reliable feeding and clip, and weld power cable
easy changeovers K4267-1 K449

• Trigger interlock switch provides
operator comfort over long welds

SPECIFICATIONS LN-25X Item # K4267-1 LN-25 Item # K449
Processes MIG-STT, Flux-Cored 3 Pulsed MIG-STT, Flux-Cored 3 Pulsed
CrossLinc Compatible Yes
Input Volts 15-110 VDC No
Output Capacity 450A/60% 15-110 VDC
Flow Meter Yes 300A/60%
Wire Feed Speed 50-700 ipm
Wire Size Range Solid: .023-1/16" Cored: .030-5/64" Aluminum: .035-1/16 No
Dimensions/Weight H 15” x W 8.7” x L 23.2” / 38 lbs. 50-700 ipm
Solid: .023-1/16" Cored: .035-5/64" Aluminum: .035-1/16"
H 14" x W 7.4" x L 21" / 40 lbs.

Miniflex® Portable Fume Extraction Unit

Lincoln 4-Pack • Filters sold separately • Filter surface area: 118 ft2
Rack Flextec®
SPECIFICATIONS

Processes Stick (light duty), TIG, MIG, Flux-Cored (light duty)

Sound Level 80 dBA

Airflow CFM Low: 95 High:108

Power Rating HP 2.4 (1.2/motor)

Input Power (Voltage/Phase/Hertz) 120/1/50/60

Input Current 12.0 A

Dimensions / Weight H 29" W 15.6" L 16.8" / 40 lbs.

Distribution Box
Multi-Weld® 350
LN-25 or LN-25X MIG Feeder

877.446.4352 www.superiortoolrental.com www.midlandtool.com 15

MIG Guns

Bernard™ BTB MIG Gun

FEATURES

LN-25X MIG FEEDER on page 15 Applications Fabrication, Heavy Equipment, Pipeline & Shipbuilding No tools
Process MIG (GMAW) required to change
Rated Output 400 A
Duty Cycle rotatable necks
Wire Size Ranges 100% CO2 Gas 60% w/Mixed Gases • Compatible with Centerfire™
Neck .023" to 1/8" • Quick Tip™ and TOUGH LOCK™
Handle Type • Consumable Series for better arc starts
Fixed and Rotatable
Trigger Large Curved Handle BTB
• Dual Pull • Dual Schedule Switch • Dual Schedule Switch w/Locking
Cable Length • Locking & Standard K126-2 Classic
15' Industrial Grade
K2952-2
Magnum® Classic Self-Shielded Semiautomatic MIG Gun

FEATURES

• Heavy-duty gun trigger switch for positive electrical contact and long life

Applications Bridge / Ironworking, Construction, Heavy Equipment,
Industrial Fabrication, Pipe Fabrication / Construction, Shipbuilding
Process
Rated Amps @ 60% Duty Cycle Flux-Cored Self-Shielded
Cable Length 350 Amps
Wire Diameters
Gun Tube Angle 15' Industrial Grade Cable
.062" to 3/32"
62º

Magnum® PRO Curve™ Semiautomatic MIG Gun

FEATURES
• High quality copper parts ensure superior electrical contact and heat dissipation
• Patent-pending anti-seize tip and diffuser thread design reduces tip and diffuser seizing
• Four trigger leads are standard for fast field repair

Applications Construction, Maintenance and Repair, Shop Production
Process Flux-Cored (FCAW), MIG (GMAW), Pulsed MIG (GMAW-P)
Rated Amps @ 60%
Duty Cycle CO2: 400 A,
Wire Diameters Mixed: 400 @ 50% DC
Cable Length
.025" to 5/64"
15'

Power Distribution

45 KVA Welder Power Distribution Panel SP-45-W
SPECIFICATIONS 120 and 208 volt
480/3 phase 100 amp
Item # 60 amp, 3 pole breaker
1 Phase Power Stepped down with a 45 KVA transformer
Primary Voltage 120/208 volt – 200 amp
Mounted in a stainless-steel weather-tight enclosure with a circuit
Secondary Power breaker viewing window
(10) 120 volt – 20 amp Hubbell G.F.C.I
Duplex All connected to 20 amp G.F.C.I. circuit breakers
Receptacles Provided on each side of the unit
Spring back weatherproof covers
SP-45-W Twist Lock For use with power tools and portable lighting
Receptacles (2) 120/208 volt – 50 amp
Both connected to 50 amp G.F.C.I. circuit breakers
4-Pin Receptacles Spring back weatherproof covers
Certifications For use in remote areas with Item # SPB-6
Portability (Portable Power Distribution Center, see below)
Dimensions (8) 480 volt – 60 amp
Connected to a 2-pole 50 amp circuit breakers
Screw-on weather proof covers
UL listed
NEMA 3R certified
Completely portable
Mounted on a 4-wheel cart
Includes 4 lifting lugs, located on the top corners
H 54" L 53" W 30"

16

Specialty Welding

Power Wave® S350 Advanced Process Welder

FEATURES

• PowerConnect® technology automatically adjusts input power from 200-600V, 50 or 60Hz,
and single-phase or three-phase

• CheckPoint®: Cloud-based system to view or analyze welding data, track equipment
usage, store weld data, configure fault limits and more

• Optional 115V (10A) AC Duplex Auxiliary Power Receptacle: Surge Blocker™ technology
to ensure welding performance is not compromised by high starting current devices such
as grinders (typically requiring 60A or more peak surge current)

• Compact and durable case, IP23 rated for harsh environments

K2823-3

SPECIFICATIONS

Applications Aerospace, Automotive, Construction, Fabrication, Production, Weld Training
Processes Stick, DC TIG, Pulsed DC TIG, MIG, Pulsed MIG, Flux-Cored
Current Type CC/CV, DC
Input Voltage 208/230/380-415/460/575/1/3/50/60
Input Current 3 Ph / 40% Duty Cycle 3 Ph / 100% Duty Cycle 1 Ph / 40% Duty Cycle 1 Ph / 100% Duty Cycle
at Rated Output 39/35/19/17/14 31/28/15/14/11 60/67 NA/NA/NA 60/53/NA/NA/NA
Rated Output GMAW: 350A/31.5V/40%(2) SMAW: 325A/33V/40%(2) GTAW-DC: 350A/24V/40%
(Current/Voltage/Duty Cycle) GMAW: 300A/29V/100% SMAW: 250A/30V/100% GTAW-DC: 300A/22V/100%
Output Range 5-350 A
Dimensions / Weight H 20.40" W 14" D 24.80" / 85 lbs.

Power Feed® 25M Plastic Case Push-Pull Wire Feeder

FEATURES

This compact shop or construction wire feeder is push-pull capable for premium aluminum
welding. Featuring Lincoln MAXTRAC® drive system, full controls and procedural memory presets,
the Power Feed® 25M is ready for advanced process welding on almost any application.

K2536-5 Construction, Metal Fabrication, Shipbuilding
Flux-Cored (FCAW), Gouging, MIG (GMAW), Pulsed, STT, TIG (GTAW), Stick
SPECIFICATIONS 40 VDC
Applications 500A / 60%
Processes Standard speed (factory setting) Extra-torque
Input Power GMAW: 50-800 ipm FCAW: 50-800 ipm GMAW: 30-400 ipm FCAW: 30-400 ipm
Rated Output .023" - 1/16" 0.023" - 1/16"
Gearing 0.030" - 5/64" 0.030" - 3/32"
Wire Feed Speed Range ipm H 14.5" W 8.5" D 23.5" / 35 lbs.
Solid Wire Size Range
Cored Wire Size Range
Dimensions / Weight

Python Air Cooled MIG Gun, Push-Pull Advanced Gooseneck

FEATURES

• “Fingertip” wire speed adjustment
• Provides hours of high speed continuous wire feed without welder fatigue
• Plug-in direct compatibility with MK, Lincoln, Miller, Fronius and Euro systems

Weldable Metals Aluminum, Flux Cored Wires, Steel 232-825
Cooling Air Cooled
Barrel
Rated Output 6" Gooseneck barrel, Ez-lock barrel can rotate 360º
Wire Feed Speed 225A / 100%
Snake Skin (Standard) 800 ipm
Cable Length 25'
Wire Type & Diameter 25'

Aluminum and Cored Wire: 0.030" - 1/16" Solid and Hard Wire: 0.030" - 0.045"

877.446.4352 www.superiortoolrental.com www.midlandtool.com 17

Inverters

XMT® 350 FieldPro™ with ArcReach® Technology

FEATURES

ArcReach® welding technology minimizes time spent walking to and from the
power source, and maximizes arc-on time, weld quality and job-site safety.

907703 Aerospace, Construction, Pipline, Fabrication, Heavy Equipment Manufacturing, Infrastructure, ArcReach® on next page

SPECIFICATIONS Maintenance & Repair, Mechanical Contracting, Pipe Fabrication/Construction, Pressure Vessel, Shipbuilding

Applications Air Carbon Arc Cutting and Gouging (CAC-A), Flux Cored (FCAW), MIG (GMAW),

Processes Pulsed MIG (GMAW-P), RMD, Stick (SMAW), TIG (GTAW)

Weldable Metals Aluminum, Specialty Metals, Steel, Stainless Steel
Weld Output
Current Type CC/CV
Carbon Diameter
Input Power Voltage DC
Input Phase
Voltage Range in CV Mode 1/4"
Amperage Range in CC Mode
Rated Output Auto-line™ 208-575 V
Amps Input at Rated
Load Output, 60 Hz Three-phase Single-phase
Max. Open-Circuit Voltage
Output Connections 10–38 V 10–38 V
Dimensions / Weight
5–425 A 5–425 A

350 A at 34 VDC, 60% duty cycle 300 A at 32 VDC, 60% duty cycle

208 V 230 V 400 V 460 V 575 V KVA KW 208 V 230 V 400 V 460 V 575 V KVA KW
40.4 36.1 20.6 17.8 14.1 14.2 13.6 60.8 54.6 29.7 24.5 19.9 11.7 11.2

75 VDC 75 VDC

Tweco® Tweco®

H 17.5" x W 12.5" x D 24" / 93 lbs.

XMT® 350 FieldPro™ 4 Pack Rack XMT® 350 FieldPro™ 6 Pack Rack XMT® 350 FiedPro™ 8 Pack Rack

907585 907406 907585 (2) ArcReach® on next page

SPECIFICATIONS XMT® 350 FieldPro™ Rack with Auto-Line® 6 Pack Rack

4 Pack Rack 8 Pack Rack

Item # 907585 907406 907585 (2)

Input Voltage 460/480 V, 575 V 460/480 V, 575 V 460/480 V, 575 V
Input Phase 3-Phase 3-Phase 3-Phase

Input Hz 50/60 Hz 50/60 Hz 50/60 Hz
Current Type DC DC DC
Weld Output
Max Open Circuit Voltage CC / CV CC / CV CC / CV
Dimensions 75 VDC 75 VDC 75 VDC
Weight H: 66" W: 32" D: 34.25" H: 66" W: 43" D: 34.25" H: 66" W: 64" D: 34.25"
599 lbs. 759 lbs. 1198 lbs.

18

ArcReach®

ArcReach® Stick/TIG Remote

FEATURES

• For use with a Dimension, XMT or compatible engine-driven ArcReach power source
• Portable and lightweight
• Allows you to change weld settings at your work area, saving a trip to the power supply
• No extra control cable to purchase, maintain, string or unstring

301325 SPECIFICATIONS Construction, Fabrication, Maintenance and Repair, Shipbuilding
Applications Air Carbon Arc Cutting and Gouging (CAC-A), Stick (SMAW), TIG (GTAW)
Processes
Operating Voltage 14-90 VDC
Dimensions/Weight W 7.125" H 4" L 21.75" / 5.8 lbs.

ArcReach® SuitCase® 12 Wire Feeder

FEATURES

• ArcReach® capabilities eliminate the time spent tracing weld cables hundreds of feet back to the
power source because weld operators can make adjustments at the ArcReach wire feeder or remote.

• Ultra-Low Drag Inlet Guide Pins make loading the wire easy and does not deform the wire on the way
into the drive rolls improving wire feeding performance.

951729

SPECIFICATIONS Construction, Heavy Manufacturing, Shipbuilding
Applications Flux Cored (FCAW), MIG (GMAW)
Processes
Input Power Operates on open-circuit voltage and arc voltage: 14-48 VDC/110 max. OCV
Input Weld Circuit Rating 425 A at 60% Duty Cycle
Wire Feed Speed
Wire Type and Diameter Capacity 50–780 ipm dependent on arc voltage
Max. Spool Size Capacity Solid Wire .023"–.052" Flux-Cored .030"–5/64"
Dimensions / Weight
12" / 45 lbs.
H 15.5" W 9" D 21" / 35 lbs.

Mig Gun

Spoolmatic® Pro Air-Cooled Pistol-Grip Spool Gun 301148
137 549
FEATURES

• Aluminum series specific tension settings ensure smooth wire
feeding performance with 4000 or 5000 series aluminum wires

• WC-24 or WC-115 weld control (required unless using a
machine that allows direct hookup). Designed for use with Miller
CV power sources supplying 24VAC and 14-pin receptacles.

SPECIFICATIONS Emergency Vehicles, Fabrication, Maintenance and Repair, Railcars,
Applications Recreational Vehicles, Shipbuilding, Sign Manufacturing, Tool Boxes, Trucks and Trailers
Processes
Wire Types MIG (GMAW), Pulsed MIG (GMAW-P) with pulsing source
Rated Output Aluminum, Steel
Wire Feed Speed
Wire Diameter Capacity 200 A at 100% Duty Cycle
Max. Spool Size Capacity 70–900 ipm (dependent on control box or Millermatic used)
Dimensions / Net Weight
Aluminum .030–1-1/16" Hard Wire .030–0.45"
4"

H 10.75" W 2.5" L 15.375" / Gun with 30-ft. Cable: 15.7 lbs.

877.446.4352 www.superiortoolrental.com www.midlandtool.com 19

5 Pack Welder

5 Pack Miller XMT® 350 FieldPro™ Welders & 30 KVA Power Rack

SPECIFICATIONS

Item # SP-30-5W

1 Phase Power 120 and 208 volt

Primary Voltage 480/3 phase 100 amp main circuit breaker
Stepped down with a 30 KVA transformer

120/208 volt 100 amp

ArcReach® on previous page 19 Secondary Power Mounted in a stainless-steel weather-tight

enclosure with a circuit breaker viewing window

(10) 120 volt 20 amp Hubbell receptacles

Duplex All connected to 20 amp G.F.C.I. circuit breakers
Receptacles Provided on each side of the unit
Spring back weatherproof covers

For use with power tools and portable lighting

(2) 120/208 volt 50 amp Hubbell twist lock receptacles

Twist Lock Both connected to 50 amp G.F.C.I. circuit breakers
Receptacles Spring back weatherproof covers
For use in remote areas with item # SPB-6
SP-30-5W
(Portable Power Distribution Center, p. 158)

Power Center (6) 120 volt 20 amp

20A 1-Pole Breakers Individually protect each duplex receptacle

Welders (5) Miller XMT® 350 FieldPro™ Welder With
ArcReach® Technology (p. 18)

Roof 20 degree pitched roof for additional weather protection

Certifications UL listed
NEMA 3R certified

Completely portable

Portability Mounted on a 4-wheel cart
Casters and fork lift pockets

Dimensions Includes 4 lifting eyes on each top corner
H 71-1/2" L 59" W 34"

XMT 350 FieldPro specs page 18

20

Engine-Drives

Classic 300 MP Perkins® Engine-Driven Diesel Welder

SPECIFICATIONS

Applications Construction, Maintenance and Repair, Pipeline

Processes Flux Cored (FCAW), Gouging, MIG (GMAW), Stick (SMAW), TIG (GTAW)

Weld Output DC, CV, CC, 3kW

Description 300 AMP DC arc welder with all copper windings and pure DC power generator

Rated DC Output • NEMA Ratings: 300A/32V/60%, 250A/30V/100%
• 90V DC, Max OCV

DC Current Fine Tune • 40-350 Amps

Adjustment Range • 220 – Max, 160 – 240, 120 – 190, 80 – 130, Min – 90

• 3,000 Watts, 60 Hz, AC

Auxiliary Power • 20 Amps @ 120 V with sealed GFCI module

• 13 Amps @ 240 V K4263-1

Engine Model • Perkins® 403F-15F-15T Diesel EPA Tier 4 • 24.7 HP • 3 cylinders

Engine Speeds Full Load: 300A (1800 RPM) High Idle: 1650-1800 RPM Low Idle: 1440 RPM

Fuel Capacity Diesel: 16 gals Oil: 6.3 Qts Coolant: 7.8 Qts

Dimensions / Weight H 37.1" x W 24.3" x L 62.8" / 1364 lbs.

Vantage® 500 Diesel Engine-Driven Welder

SPECIFICATIONS Construction, Maintenance and Repair K2686-4
Applications
Processes Flux Cored (FCAW), Gouging, Stick (SMAW), TIG (GTAW)
Weld Output
CC Rated Output CC/CV, DC, 22kW

CV Rated Output 500A/40V/100%, 525A/38V/60%
• DC Constant Voltage: 500A/40V/100%, 525A/38V/60%
Generator Output • Single Dial Continuous Control: 14-40 V
Engine Model • Wire Feeder Power: 120V / 60 Hz, 42V / 60 Hz
Engine Speeds 3 phase: 20kW 1 phase: 12kW
Fuel Capacity
Dimensions • Perkins® 404D-22T EPA Tier 4i • 45 HP @ 1850 RPM • 4 cylinders
500A Load: 1850 RPM High Idle: 1850 RPM Low Idle: 1400 RPM
Diesel: 20 gals Oil: 11.2 Qts Coolant: 11.5 Qts

H 35.9" W 25.3" L 60" (To top of exhaust tube: 45.5") / 1290 lbs.

SAE-500® Diesel Engine-Driven Welder / Generator

SPECIFICATIONS

Applications Field Construction, Pipeline

Processes Flux Cored (FCAW), Gouging, Stick (SMAW), TIG (GTAW)

Weld Output CC, DC

Rated Output 400A / 40V / 100%
500A / 40V / 60%

Output Range 80-575 A DC

Generator Output 3000 watts

Engine Model • Deutz Diesel TD2.9L4 EPA Tier 4 Final • Water cooled • 4 cylinders

Engine HP and Speeds • Horsepower: 64 HP @ 1800 RPM Low Idle: 1180 rpm
• Full Load 500A: 1800 rpm High Idle: 1800 rpm
K4053-1
Fuel Capacity Fuel: 29 gal. Oil: 8.9 qts Coolant: 9.5 qts

Dimensions/Weight H 45.8" x W 28" x L 83" (54.3" to top of exhaust) / 2111 lbs.

877.446.4352 www.superiortoolrental.com www.midlandtool.com 21

Engine-Drives

Big Blue® 350 PipePro Diesel Welder / Generator

FEATURES
• Designed for transmission pipeline work
• Offers stick and MIG/Flux-Cored welding capabilities to meet high-strength steel requirements
• Superior arc performance
• Adjustable arc control
• Adaptive Hot Start™ (stick) TRAILER
• FCAW/MIG arc performance MOUNTED
• Lift-Arc™ TIG with Auto-Stop™ OPTIONAL
• Auto Remote Sense™ (ARS) detects if a remote control is plugged into the
ArcReach® on page 19 14-pin receptacle and eliminates confusion of a remote/panel switch.
907428 • Low OCV stick (VRD) reduces the open-circuit voltage to 15 volts when the

welding power source is not in use, increasing operator safety without
compromising arc starts.

SPECIFICATIONS Mechanical Contracting, Pipe Fabrication / Construction

Applications Air Carbon Arc Cutting and Gouging (CAC-A), Flux-Cored (FCAW), MIG (GMAW), Stick (SMAW), TIG DC (GTAW-DC)
Processes
Weldable Metals Steel, Stainless Steel
Carbon Diameter
Weld Mode Rated: 1/4"
Weld Output Range
Weld Output at 100% CC/DC (Stick) CC/DC (TIG) CV/DC (FCAW/MIG)
Duty Cycle
Max. Open-Circuit Voltage 20–400 A 20–400 A 14–40 V
Gen. Power Rated at 104º F
Sound Levels 300 A at 32 VDC 350 A at 27 VDC 400 A at 24 VDC
Engine Model
Horsepower (HP) 85 VDC, 15 VDC (sense voltage for stick and Lift-Arc TIG)
Engine Speeds Continuous: 10,000 watts Peak: 12,000 watts Single-Phase: 84/42 A, 120/240 VAC, 60 Hz
Dimensions / Weight
Idle: 68.7 dB Weld 72.1 dB

Mitsubishi S4L2, Four-cylinder, liquid cooled industrial diesel, EPA Tier 4 Final Compliant

24.7
Weld: 1800 RPM Idle: 1500 RPM
W 26.25" H 32" D 56" / 1018 lbs

Big Blue® 450 Duo CST Diesel Welder / Generator

FEATURES
• Multi-function fuel gauge: Displays fuel level and engine hours, and can be customized
to set oil change interval reminders. In the case of high coolant temperature, low oil pressure,
or low fuel level, the engine will shut down to prevent damage, or make restarting easier.
• Adaptive Hot Start™ for stick arc starts: Automatically increases the output of a weld
should the start require it. Prevents the electrode from sticking and creating an inclusion.
• Remote amperage control: Provided through 14-pin
receptacle on front of the machine, and permits use of TRAILER
standard and wireless remote amperage control devices. MOUNTED

ArcReach® on page 19 907477 OPTIONAL

SPECIFICATIONS Fabrication, Maintenance and Repair, Pipe Fabrication/Construction, Structural

Application Air Carbon Arc Cutting and Gouging (CAC-A), Stick (SMAW), TIG DC (GTAW-DC)
Processes
Weldable Metals Stainless Steel, Steel
Carbon Diameter
Welding Mode Rated: 3/16" Carbons (Paralleled)
Output Mode
Weld Output Range CC/DC (Stick/TIG)
Weld Output Rated at 122º
Max. Open-Circuit Voltage Separate (dual outputs) Paralleled (combined)
Generator Power Output Rated at 122º F
Sound Levels at Rated Output, 23 ft. 5–225 A (each side); 5–280 A (one side only) 10–450 A
Horsepower (HP)
Weld Speed 175 A, 27 VDC, 100% duty cycle 350 A, 27 VDC, 100% duty cycle
Fuel Capacity
Oil Capacity 77 VDC 77 VDC
Dimensions / Weight
3-phase: 12,000 watts, 240 VAC, 60 HZ 1 phase: 10,000 watts, 120/240 VAC, 60 Hz continuous

72.2 dB

24.7

1800 RPM

11.5 Gal.

6.3 Qt.

W 26.25" x H 32" x L 56" / 1064 lbs. (without fuel)

22

Engine-Drives

Big Blue® 800 Duo CST Diesel Welder / Generator

FEATURES

• A complete multi-process & multi-operator welder / generator that delivers two independent
pipe quality arcs in one complete package.

907587 TRAILER
MOUNTED
SPECIFICATIONS OPTIONAL

ArcReach® on page 19 Applications Construction, Maintenance and Repair, Mechanical Contracting, Mining Maintenance,

Processes Pipe Fabrication, /Construction, Railroad Maintenance

Weldable Metals Air Carbon Arc Cutting and Gouging (CAC-A), Flux-Cored (FCAW), MIG (GMAW), Pulsed MIG (GMAW-P),
Carbon Diameter
Weld Mode/Process RMD, Stick (SMAW), Stud Welding, Submerged Arc (SAW), TIG DC (GTAW-DC)
Output Mode
Weld Output Range Stainless Steel, Steel
Weld Output at 100% Duty Cycle
Rated at 104º F 1/2"
Max. Open-Circuit Voltage
Generator Power Output Rated at 104º F CC/DC (Stick/TIG) CV/DC (MIG/FCAW)
Engine Model
Horsepower (HP) Separate (dual outputs) Paralleled (combined) Separate (dual outputs) Paralleled (combined)
Engine Speeds
Fuel Capacity 20–400 A 40–800 A 14–50 V 14–50 V
Standard Shutdowns
Dimensions / Weight 400 A at 36 V 700 A at 44 V 400 A at 34 V 750 A at 40 V

(each side) 800 A at 38 V (each side) 800 A at 38 V

85 VDC 30 VDC

3-phase: 27,000 watts peak 20,000 watts continuous 1-phase: 15,000 watts peak, 12,000 watts continuous

Deutz TD 2.9 L4

65.7

Weld: 1800 RPM Idle: 1350 RPM

25 Gal.

High coolant temperatures, low fuel, low oil pressure

W 28.5" H 46" L 69.5" / 1869 lbs.

Trailblazer® LP, Gas and Diesel

Trailblazer® 275 LP Trailblazer® 325 Gas Trailblazer® 325 Diesel

275-amp 300-amp 300-amp

TRAILER MOUNTED
OPTIONAL

Model 907691 907510 907566
Applications 907691 Trailblazer 275 Liquid Propane 907510 Trailblazer 325 Gas 907566 Trailblazer Diesel

Processes Fabrication, Maintenance and Repair, Pipe Fabrication/Construction, Sheet Metal, Structural Steel Work

Weldable Metals All Models: Stick (SMAW), MIG (GMAW), Flux-Cored (FCAW), DC TIG / Pulsed TIG (GTAW/GTAW-DC), Air Carbon Arc (CAC-C) Cutting and Gouging
Carbon Diameter
Welding Mode Additional 325 Diesel Processes: RMD, Pulsed MIG (GMAW-P)
Amp / Volt Ranges
Rated Weld Output at 104º F Stainless Steel, Steel

Single-Phase Generator Power Capable: 1/4" / Rated: 3/16"

Weld Sound Levels at CC/DC / CV/DC
Rated Output, 23 ft.
Stick/TIG: 10–275 A MIG (FCAW): 10–35 V Stick/TIG: 10–325 A MIG (FCAW): 10–35 V Stick/TIG: 10–325 A MIG (FCAW): 10–35 V
Dimensions / Weight
275 A at 28 V, 100% Duty Cycle 325 A at 28 V, 100% Duty Cycle 325 A at 33 V, 100% Duty Cycle
Weld Speed
Idle Speed Peak: 11,000 watts Peak: 12,000 watts Peak: 12,000 watts
Fuel Capacity
Continuous: 10,500 watts Continuous: 10,500 watts Continuous: 10,500 watts

150 A load: 65 dB 150 A load: 65 dB 150 A load: 75 dB

325 A load: 73.5 dB 325 A load: 73.5 dB 325 A load: 81.5 dB

32.75" to top of exhaust 32.75" to top of exhaust 34.375" to top of exhaust

W 20" H 28" L 40.5" / 459 lbs. W 20" H 28" L 40.5" / 460 lbs. W 20" H 28" L 45.375" / 620 lbs.

Auto-Speed™ 2400, 2800, 3200 or 3600 RPM

2400 RPM

N/A 12 Gal.

877.446.4352 www.superiortoolrental.com www.midlandtool.com 23

Plasma Cutters

Hypertherm® Powermax85® Plasma System

Capacity Thickness Cutting Cut Speed
Recommended capacity 1" 20 ipm
Severance capacity 10 ipm
Pierce* capacity 1-1/4" 5 ipm
Capacity 1-1/2" -
3/4"
Metal Removal Rate Gouging Grove Profile
0.23" D x 0.28" W
Typical gouge capacity 19.5 lbs. per hour

* Pierce rating for handheld use or with automatic torch height control

POWERMAX85 SPECIFICATIONS 200-480 V, 1-PH, 50/60 Hz 200-600 V, 3-PH, 50/60 Hz
Input Voltage 12.2 kW
FEATURES Kilowatt Output 200/208/240/480 V, 1-PH 70/68/58/29 A,
Input Current @ 12.2 kW 200/208/240/480/600 V, 3-PH 42/40/35/18/17 A
• Plasma metal cutting and gouging Output Current 25-85 A
system for hand-held cutting (1") Rated Output Voltage 143 VDC
and mechanized piercing (3/4") 60% @ 85 A, 230-600 V, 3-PH 60% @ 85 A, 480 V, 1-PH
Duty Cycle @ 104º F 50% @ 85 A, 240 V, 1-PH 50% @ 85 A, 200-208 V, 3-PH
• Cut speeds 2.5x greater than 40% @ 85 A, 200-208 V, 1-PH 100% @ 66 A, 230-600 V, 1/3-PH
oxyfuel on 1/2" mild steel Open Circuit Voltage (OCV) 305 VDC
Dimensions With Handles D 19.7" W 9.2" H 17.9"
• Spend less time on grinding and Weight w/25' Torch 71 lbs.
edge preparation Gas Supply Clean, dry, oil-free air or nitrogen
Recommended Gas Inlet Cutting: 400 scfh, 6.7 scfm @ 85 psi
• Multiple, easy-to-use torch styles Flow Rate/Pressure Gouging: 450 scfh, 7.5 scfm @ 70 psi
let you tackle a wide variety of jobs Input Power Cable Length 10'
Power Supply Type Inverter - IGBT
• Smart Sense™ technology ensures Engine Drive Requirement 20 kW for full 85 A Output
air pressure is always correctly set Certifications CSA-certified for use in the Americas and Asia, except China.

• SpringStart™ technology ensures
consistent starting and a more
reliable torch

• Drag cut at full output with a
patented shield that reduces dross
buildup for smoother cutting

Hypertherm® Powermax125® Plasma System

Capacity Thickness Cutting Cut Speed
Recommended 1-1/2" 18 ipm
Severance (hand cutting) 1-3/4" 10 ipm
Pierce* 2-1/4" 5 ipm
Capacity 1"
Grove Profile
Metal Removal Rate Gouging 0.17-0.31" D x 0.24-0.39" W

Typical gouge 27.6 lbs per hour

* Pierce rating for handheld use or with automatic torch height control

POWERMAX125 SPECIFICATIONS 480-600 V, 3-PH, 50/60 Hz
Input Voltage 21.9 kW
FEATURES Kilowatt Output 480/600 V, 31/24 A
Input Current @ 12.2 kW 30-125 A
• Plasma metal cutting and gouging Output Current 175 VDC
system for hand-held cutting (1-1/2") Rated Output Voltage 100% @ 125 A, 480/600 V, 3-PH
and mechanized piercing (1") Duty Cycle @ 104º F 320 VDC
Open Circuit Voltage (OCV) D 23.3" W 10.8" H 20.0"
• Cut speeds 2.5x greater than Dimensions with Handles 480 V: 105.7 lbs. 600 V: 104.7 lbs.
oxyfuel on 1/2" mild steel Weight w/25' Torch Clean, dry, oil-free air or nitrogen
Gas Supply Cutting: 260 I/min (550 scfh) @ 5.9 bar (85 psi)
• Spend less time on grinding and Recomended Gas Inlet Gouging: 212 I/min (450 scfh) @ 4.1 bar (60 psi)
edge preparation Flow Rate/Pressure 10'
Input Power Cable Length Inverter - IGBT
• Multiple, easy-to-use torch styles Power Supply Type 40 kW for full 125 A output
let you tackle a wide variety of jobs Engine Drive Requirement CSA-certified for use in the Americas and Asia, except China.
Certifications
• Smart Sense™ technology ensures
air pressure is always correctly set

• SpringStart™ technology ensures
consistent starting and a more
reliable torch

• Drag cut at full output with a
patented shield that reduces dross
buildup for smoother cutting

24

Plasma Cutters

Thermal Dynamics Cutmaster® 60i Plasma Cutter

1-5630-1 SPECIFICATIONS 10-60 A, continuously adjustable
Amperage Output 7.6 kW
FEATURES Rated Output 300 V
Open-Circuit Voltage (OCV)
• SL60QD 1Torch quick disconnect Input Voltage 208–480 VAC ± 10%
with ATC® (Advanced Torch Connector) Rated Duty Cycle 50% @ 60 A / 60% @ 50 A / 100% @ 40 A
allowing selective replacement of Amperage Draw 43 A @ 208 V / 39 A @230 V / 19 A @ 480 V
either the torch handle assembly or Enclosure Rating
the torch leads, using the patented Input Power Cable and Plug IP23S
SureLok® technology also available Work Lead with Ground Clamp 9 ft. single phase 8 AWG 3/C with NEMA 6-50P Plug
as an RPT Torch Gas Requirements
Operating Temperature Range 20 ft. #8 work cable with 50mm connection
• 5/8" recommended cut capacity Input Pressure Compressed air
with greater than 1-1/2" maximum Air Flow Requirements (cutting and gouging) 32ºF–122ºF
sever and 5/8" pierce Power Supply Gas Filtering
Recommended Cut 90–125 psi max (6.2 - 8.6 bar)
• High-visibility, over-sized display Maximum Sever 300–500 scfh / 5–8.3 cfm (142–235 I/s)
with gas optimizer technology and Pierce Rating
consumables end-of-life indicator Torch Duty Cycle Particulates to 5 Microns
Torch Air Pressure 5/8"
Torch Air Consumption 1-1/2"
5/8"
Torches (for use with the Cutmaster 60i)
100% at 60 A @ 400 scfh air flow
Dimensions / Weight 75 psi (5.2 bar)
6.7 psi (190 I/s)

SL60QD 1 Torch (supplied), SL60/SL 100 1 Torch,
SL100 Mechanized 1 Torch, SL100SLV Automated 1 Torch

H 14.15" W 7.85" L 21.12" / 37 lbs.

& BThuricnkininegssStGaatuiogne

Fixed Velocity Thickness Gauge Gas Burning Station

FEATURES

The MX-1 will hold a single velocity,
making it the perfect choice applications
where only one material is being tested
day after day. With the preset velocity in
the gauge, you simply turn it on and go
to work. The tool’s backlit display is easy
to read, even in dim light conditions, and
the unit operates for up to 200 hours on
a single set of AA batteries. The MX-1
comes complete, ready to use, and does
not require special training to operate.

MX-1

SPECIFICATIONS Corrosion and pitting, tube and pipe, tanks, boilers, glass SPECIFICATIONS
Applications Two 1.5V alkaline or 1.2V NiCad AA cells
Power Source Typically operates for 200 hours on alkaline and 130 hours on NiCad Available in Oxygen/Acetylene
Battery Life Multi-function 4.5 digital liquid crystal display with 0.5 inch numerals, Inlets Oxygen/Natural Gas
Display backlit for use in poor light conditions. Dimensions Oxygen/Propane
Measurements displayed in inches, inches/microsecond, Weight 1-1/4", 1
Measurement Display millimeters, and meters/second. Bar graph indicates W30-3/4" H 60" D 19-1/2"
stability or reading. 150 lb. (Approximate)
Measuring Range 0.025 to 19.999 inches, 0.63 to 500 millimeters
Velocity Range .0492 to .3937 in/ms, 1250 to 10,000 meters/sec
Operating Temperature -20 to 120 F
Case Extruded aluminum body with nickel plated end caps.
Keypad Resistant to impact and environmentally sealed.
Dimensions / Weight Six tactile-feedback keys
W 2.5" H 4.75" D 1.25" / 10 ounces

877.446.4352 www.superiortoolrental.com www.midlandtool.com 25

Weld Test Connex

Our Weld Test Connex is a climate controlled, converted shipping container that houses three fully loaded welding
stations. To properly facilitate weld training and testing, each station includes: one Miller® XMT® 350 Field Pro inverter
welder, a wire feeder, LED lighting, an exhaust fan, mixed gas lines, argon inlet with dual drops for purging, a grinder
holder, a welding table, and a welding curtain. The Connex also features a front work station with a 300 lb rod oven,
a coupon bender, one bench grinder, one tungsten grinder, and a chain vise.

Argon Inlet w/Dual Drops f/Purging

Mixed Gas Lines XMT® 350 Field Pro

LED Lights

Exhaust Fan

300 lb
Rod Oven
Coupon
Bender
Bench
Grinder

Feeder Primary Power Inlet
Grinder Holder

Compressed Air Line
Weld Table
Tungsten Grinder

Dimensions

26

• Welding Rod Accessories
• Stingers
• Grounds • Leads
• Welding Cable • Stingers
• Fire Blankets • Grounds
• Welder Power

Extender Kits

877.446.4352 www.superiortoolrental.com www.midlandtool.com 27

Welder Calibration

WHY CALIBRATE YOUR WELDER

Performing welding tasks on a machine that is out of calibration can create an environment where costly errors are possible.
A certified welder calibration will guarantee that the welding procedures performed by your machine are accurate, safe and efficient.

WE PROVIDE

• Calibration of amp meters, volt meters, wire feed meters, and panel indicators
• Certificate of calibration
• Data sheet showing calibration results
• Written calibration procedure
• Calibration sticker with calibration and recalibration dates
• Testing and visual inspection of machine during calibration
• Documentation provided on calibration equipment – all standards traceable to N.I.S.T.

INDUSTRIES SERVED

• Aerospace • Nuclear • Bridge Building • Pipeline • Automotive • Military • Steel Producing • Oil Refining

®

28

Welder Repair

877.446.4352 www.superiortoolrental.com www.midlandtool.com 29

Light Tower

Diesel LED Light Tower HIGH PERFORMANCE, LED LUMINOSITY
The CPLT V5+ comes with 4 + lamps x 350 kW
FEATURES
that gives you maximum durability
• HardHat® enclosure
• Galvanized vertical mast with 5 sections and light coverage.

and can be shipped in the vertical position
• Four heavy duty stabilizers with level indicator
• Ultra compact footprint: Up to 20 units on

a 53ft Trailer
• Spring axle trailer and tow hitch conforms

to DOT requirements
• Compact Kubota Z482 Tier 4 final engine
• Low Noise: 63 dB(A)

LONG FUEL AUTONOMY Dimensions
With Fuel efficiency of .56 GPH
the 28 gallon fuel tank allows Dim. in transport L: 66" x W: 43" x H: 98"
optimal run times between refueling Dim. in operation L 114" x W: 91" x H: 296"
Weight 1544 lbs.
EASY SERVICE ACCESS
Wide wing doors allow 100% CPLT V5+
access to the machine, including
service components and drains.

SPILLAGE-FREE FRAME
Environmentally friendly frame design
prevents oil, fluids and fuel from leaking
out and contaminating the ground.

30

877.446.4352 www.superiortoolrental.com www.midlandtool.com 31

Air Compressors

Chicago Pneumatic Air Compressors
Designed for demanding job sites, these compressors allow operators to run multiple hand tools and hammers at the
same time for maximum efficiency. They’re also ideal for sandblasting, irrigation blow-outs and general construction
applications. With noise reducing enclosures, straightforward controls and a low-maintenance design, they’re built for
reliable performance day in and day out.

FEATURES

• Cold Climate Package (Synthetic Oils, Block Heater, HD Battery, Thermostatic By-Pass Valve)
• Ease of transportation
• User friendly controls
• Efficient operation
• CRN approved vessels for Canada

CPS 110

CPS 185

CPS 250

Specifications

CPS 110 Model CPS 110 CPS 185 CPS 250
CPS 185 Free air delivery (FAD) @ effective
CPS 250 working pressure cfm 110 185 250-189

Normal effective working pressure psig 100 100 100-150
125 125-175
Maximum unloaded pressure psig 58 58
2 x 3/4" 58
Maximum working pressure psig 58 76 1 x 1-1/2" *& 3 x 3/4"
125
Air compressor outlets in. 2 x 3/4" -20 76
113
Max. sound pressure level (LPA) at 23 feet dB(A) 75 2 -4
20 2.9
Max. ambient temperature at sea level ºF 50 2.3 23
8.6 3.4
Min. starting temperature (cold start aid) ºF -10 6.7

Compressor oil Gal 1

Capacity fuel tank Gal 7.35

Fuel consumption @ 100% load Gal/hr 1.28

Fuel autonomy at full load standard hr 5.7

Engine Kubota 1803T Kubota V2403-CR-TE4B
Model Kubota D902 T4F 4 4
1.8 2.4
Number of cylinders 3 49 64

Displacement L 0.898 Tier Final Tier 4 Final
2,700 2,700/2,200
Power output @ normal shaft speed hp 25 1,800
1,800
Emissions level N/A

Full load RPM rpm 3,600

Unload RPM rpm 2,000

Trailer dimensions
Unit Dimensions w/trailer
Unit weight w/trailer in. L 100 W 49 H 48 L 131 W 60 H 56 L 150 W 63 H 62
lbs. 1,102 2,400 2,866

32

Air Compressors

Quincy QSI 750 Rotary Screw Electric Air Compressor

FEATURES

• Trouble Free: Heavy duty intake filter
for quiet, trouble-free operation

• Reliability: Generously sized coolers
ensure reliable operation in ambient
temperatures as high as 115° F and
after-cooler approach as low as 3° F

• Easy Flow: Axial flow inlet housing
• Maximum Efficiency: Rugged QSI

air-end with triplex bearings for
maximum efficiency and operating life

Air Dryer QSI 750

Specifications Full Load: 745 cfm M3/min @ 7.58 BAR: 21.10 Motor HP/rpm: 150/1800

@ 110 PSIG Full Load Full Load: 740 cfm M3/min @ 7.58 BAR: 20.95 Motor HP/rpm: 200/1800
@ 125 PSIG Full Load
@ 175 PSIG (High Pressure) ACFM @ 175 PSIG: 712 HP: 200 M3/min @ 12.07 BAR: 20.16
@ 210 PSIG (High Pressure)
Rotor Diameter ACFM @ 210 PSIG: 702 HP: 250 M3/min @ 14.48 BAR: 19.88
Dimensions / Weight
10.04 / 255 inches per mm

L 116" W 68" H 76.25" / 7500 lbs

Refrigerated Air Dryer

SPECIFICATIONS
Air Dryer Style Refrigerated
Capacity 750 cfm
Connection 3" NPT (M)
Controls Non-Cycling
Cooling Type Air Cooled
Dew Point 39ºF
Max Pressure 188 psi 61’’
Min Ambient Temp. 40ºF 41’’
Power Source/Type Electric
Rated Flow 750 CFM
Standard Voltages 460/3/60
Type R404A Refrigerent Gas 41’’

Voltage Details 460/480/3/60

1060 Gallon Manifold Tank

SPECIFICATIONS
Diameter 48 O.D.
MAWP 155 psi at 400º
MDMT -20ºF at 155 psi
Capacity Approx 1060 Gallons
Weight 1966 lbs.
CRN L4208.5C

AT-1060

877.446.4352 www.superiortoolrental.com www.midlandtool.com 33

34

Impact Wrenches & Sockets

Only industrial-grade impact wrenches are used in
our fleet, designed for the most rugged of applications where super duty is required.

877.446.4352 www.superiortoolrental.com www.midlandtool.com 35

Impact Wrenches MADE INTHE USA

3/4" Pistol Grip 3/4" Right Angle 3/4" & 1" Pistol Grip 1" Industrial Impact

3/4" 1"

Stainless Steel Also available in
#5 spline drive

SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS

Square Drive 3/4" Square Drive 3/4" Square Drive 3/4 & 1" Square Drive 1"
Max Torque 1,100 ft. lbs. Max Torque 550 ft. lbs. Max Torque 1,700 ft. lbs. Max Torque 2,000 ft. lbs.
Rec’d Hose Size 1/2" Rec’d Hose Size 1/2" Rec’d Hose Size 1/2" Rec’d Hose Size 1/2"
Weight 12 lbs. Weight 26 lbs. 13.5 lbs. Weight 25 lbs.
Length 8-3/4" Length 17.5" Weight 9" Length 12-1/4"
Avg. Air Cons. 40 cfm Avg. Air Cons. 36 cfm Length 48 cfm Avg. Air Cons. 58 cfm
Avg. Air Cons.

1" Pistol Grip 1" Right Angle 1-1/2" One-Man 2-1/2" Two-Man

Also available in Also available in
#5 spline drive #5 spline drive

SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS

Square Drive 1" Square Drive 1" Square Drive 1-1/2" Square Drive 2-1/2"
Max Torque 2,000 ft. lbs. Max Torque 750 ft. lbs. Max Torque 3,000 ft. lbs. Max Torque 50,000 ft. lbs.
Rec’d Hose Size 1/2" Rec’d Hose Size 1/2" Rec’d Hose Size 1/2" Rec’d Hose Size 1"
Weight 23 lbs. Weight 36 lbs. Weight 35 lbs. Weight 215 lbs.
Length 9-7/8" 19" Length 14-1/2" Length 26-5/8"
Avg. Air Cons. 58 cfm Length 58 cfm Avg. Air Cons. 70 cfm Avg. Air Cons. 155 cfm
Avg. Air Cons.

IWmopralcdt’sWLraenrgchest MADE INTHE USA

The 599 3-1/2" Drive Impact Wrench EXAMPLE

FEATURES

The IR-599A1, 3-1/2" is the world’s largest
and most powerful square drive impact
wrench, with remote control.

SPECIFICATIONS IR-599A1
Item # 3-1/2"
Square Drive 80,000 ft. lbs.
Max Torque 1-1/2"
Rec’d Hose Size 599 lbs.
Weight 37-1/2"
Length 375 cfm
Avg. Air Cons.

36

MADE INTHE USA Impact WrTeitnacnhiuems

3/4" Super Duty Titanium Industrial Air Impact Wrench SPECIFICATIONS

FEATURES Item # 2925R2Ti

• Titanium hammer case Square Drive 3/4"
• Ergonomic handle design
• Three-piece motor housing Max Torque 1,300 ft. lbs.

#2925R2Ti Rec’d Hose Size 1/2"

Weight 11.8 lbs.

Length 8-7/8"

Avg. Air Cons. 60 cfm

1" Super Duty Titanium Industrial Air Impact

FEATURES SPECIFICATIONS

• High performance motor package includes 7-vane rotor titanium hammer case Item # 3940B2Ti
increases strength, reduces weight and provides exceptional corrosion resistance.
Square Drive 1"
• Laser-etched product information lasts the life of the tool.
• Twin hammer mechanism has the strongest, most durable long-life Max Torque 2,500 ft. lbs.

mechanism in the industry. Rec’d Hose Size 1/2"
• Integrated reverse lever provides protection in the most abusive applications.
Weight 21.2 lbs.

#3940B2Ti Length 13-1/2"

Avg. Air Cons. 70 cfm

1-1/2" Super Duty Titanium Industrial Air Impact Wrench

FEATURES SPECIFICATIONS

• Titanium hammer case increases strength, reduces weight, and provides Item # 3955B2Ti
exceptional corrosion resistance.
Square Drive 1-1/2"
• High performance reverse biased motor package includes a 7-vane rotor.
• Twin hammer mechanism is the strongest, most durable, longest-life Max Torque 5,000 ft. lbs.

mechanism in the industry. Rec’d Hose Size 1/2"
• Ergonomic handle improves operator comfort.
Weight 34.6 lbs.

#3955B2Ti Length 16-1/2"

Avg. Air Cons. 80 cfm

MADE INTHE USA ImpSaucpteWrproewncehreeds

FEATURES Swivels 360º
in all directions
• Highest power-to-weight ratio.
• An extremely powerful motor and a highly efficient clutch - in combination

with low weight housings - give the LMS8-series unrivaled power-to-weight
characteristics, allowing for very fast torque build up.
• Atlas Copco swivels come standard on all impact wrench rentals

3/4" Pistol Grip 1" Impact Wrench 1-1/2" Impact Wrench

SPECIFICATIONS LMS58 HR20 Also available in LMS68 GIR25 SPECIFICATIONS LMS88 GIR38
Item # #5 spline drive Item #
Square Drive LMS58 HR20 LMS68 GIR25 Square Drive LMS88 GIR38
Torque Range 3/4" SPECIFICATIONS 1" Torque Range 1-1/2"
Max Torque 221-590 ft. lbs. Item # 442-1400 ft. lbs. Max Torque 737-4054 ft. lbs.
Impacts Per Min 884 ft. lbs. Square Drive 2036 ft. lbs. Impacts Per Min 7370 ft. lbs.
Free Speed r/min 900 Torque Range 780 Free Speed r/min 540
Weight 5500 Max Torque 5000 Weight 3800
Air Cons. Under lLoad 10.6 lbs. Impacts Per Min 21.1 lbs. Air Cons. Under Load 33.0 lbs.
Air Inlet Thread 30.5 cfm Free Speed r/min 58.9 cfm Air Inlet Thread 69.4 cfm
3/8" Weight 1/2" 1/2"
877.446.4352 Air Cons. Under Load
Air Inlet Thread

www.superiortoolrental.com www.midlandtool.com 37

Impact Sockets

PURCHASE or RENT

3/4" Drive 1" Drive 1-1/2" Drive #5 Spline Drive

6 Pt. Standard & Deep 6 Pt. Standard & Deep 6 Pt. Standard & Deep Standard & Deep

Nom. Stand. Deep Nom. Ret- Stand. Deep Nom. Ret- Stand. Deep S(Ninioz.m)e .
Stand. Deep Size Ret- Item # Item # Size Ring Item # Item # Size Ring Item # Item #
Item # Item # (in.) Ring (in.) Z-2421 Z-2421L (in.) RR10020S 3/4
84822 84922 1-5/16 84575 Z-9512 Z-9512L 13/16
Z-1208 Z-1208L 1/2 RR10032S 8824 8924 3/4 6583 84823 84923 1-3/8 84575 Z-9513 Z-9513L 7/8
6818 6918 9/16 6581 8826 8926 13/16 6583 84824 84924 1-7/16 84575 5828 Z-9514L 15/16
6820 6920 5/8 6581 8828 8928 7/8 6583 84825 84925 1-1/2 84575 5830 Z-9515L 1
6822 6922 11/16 6581 8830 8930 15/16 6583 84826 84926 1-9/16 84575 5832 Z-9516L 1-1/16
6824 6924 3/4 6581 8832 8932 1 6583 84827 84927 1-5/8 84575 5834 Z-9517L 1-1/8
6826 6926 13/16 6581 8834 8934 1-1/16 6583 84828 84928 1-11/16 84575 5836 Z-9518L 1-3/16
6828 6928 7/8 6581 8836 8936 1-1/8 6583 84829 84929 1-3/4 84575 5838 Z-9519L 1-1/4
6830 6930 15/16 6581 8838 8938 1-3/16 6583 84830 84930 1-13/16 84575 5840 Z-9520L 1-5/16
6832 6932 1 6581 8840 8939 1-1/4 6583 84831 84931 1-7/8 84575 5842 Z-9521L 1-3/8
6834 6934 1-1/16 6581 8842 8942 1-5/16 6583 84832 84932 1-15/16 84575 5844 Z-9522L 1-7/16
6836 6936 1-1/8 6582 8844 8944 1-3/8 6581A 84833 84933 2 84575 5846 Z-9523L 1-1/2
6838 6938 1-3/16 6582A 8846 8946 1-7/16 6581A 84834 84934 2-1/16 84575 5848 Z-9524L 1-9/16
6840 6940 1-1/4 6582A 8848 8948 1-1/2 6581A 84835 84935 2-1/8 84575 Z-9525 Z-9525L 1-5/8
6842 6942 1-5/16 6582A 8850 8950 1-9/16 6584 84836 84936 2-3/16 84576 5852 Z-9526L 1-11/16
6844 6944 1-3/8 6582A 8852 8952 1-5/8 6584 84837 84937 2-1/4 84576 Z-9527 Z-9527L 1-3/4
6846 6946 1-7/16 6582A 8854 8954 1-11/16 6584 84838 84938 2-5/16 84576 5856 Z-9528L 1-13/16
6848 6948 1-1/2 6582A 8856 8956 1-3/4 6585 84839 84939 2-3/8 84576 5858 Z-9529L 1-7/8
6850 6950 1-9/16 6582A 8858 8958 1-13/16 6585 84840 84940 2-7/16 84576 5860 Z-9530L 1-15/16
6852 6952 1-5/8 6582A 8860 8960 1-7/8 6585 84841 84941 2-1/2 84576 Z-9531 Z-9531L 2
6854 6954 1-11/16 6582A 8862 8962 1-15/16 6585 84842 84942 2-9/16 84576 5864 Z-9532L 2-1/16
6856 6956 1-3/4 6582A 8864 8964 2 6585 84843 84943 2-5/8 84576 Z-9533 Z-9533L 2-1/8
6858 6958 1-13/16 6582A 8866 8966 2-1/16 6585 84844 84944 2-11/16 84576 Z-9534 Z-9534L 2-3/16
6860 6960 1-7/8 6582A 8868 8968 2-1/8 6585 84845 84945 2-3/4 84576 Z-9535 Z-9535L 2-1/4
6862 6962 1-15/16 6582A 8870 8970 2-3/16 6585 84846 84946 2-13/16 84576 Z-9536 Z-9536L 2-5/16
6864 6964 2 6582A 8872 8972 2-1/4 6585 84847 84947 2-7/8 84576 Z-9537 Z-9537L 2-3/8
6890 6966 2-1/16 6582A 8874 8974 2-5/16 6585 84848 84948 2-15/16 84576 Z-9538 Z-9538L 2-7/16
6892 6968 2-1/8 6582A 8876 8976 2-3/8 6585 84849 84949 3 84576 Z-9539 Z-9539L 2-1/2
6894 69100 2-3/16 6582A 8878 Z-1639L 2-7/16 6585 84850 84950 3-1/16 84576 Z-9540 Z-9540L 2-9/16
6896 69102 2-1/4 6582A 8880 8980 2-1/2 6585 84851 84951 3-1/8 84576 Z-9541 Z-9541L 2-5/8
Z-1237 69104 2-5/16 RR18708S 8882 8982 2-9/16 6586 84852 84952 3-3/16 84576 Z-9542 Z-9542L 2-11/16
6898 69106 2-3/8 6582A 8884 Z-1642L 2-5/8 RR10017S 84853 84953 3-1/4 84576 Z-9543 Z-9543L 2-3/4
68100 69108 2-7/16 6582C 8886 Z-1643L 2-11/16 RR10017S 84854 84954 3-5/16 84576 Z-9544 Z-9544L 2-13/16
68102 69110 2-1/2 6582C 8888 8988 2-3/4 6586 84855 84955 3-3/8 84576 Z-9545 Z-9545L 2-7/8
68104 69112 2-9/16 6582C 8890 8990 2-13/16 6586 84856 84956 3-7/16 84576 Z-9546 Z-9546L 2-15/16
68106 69114 2-5/8 6582C 8892 8992 2-7/8 6586 84857 84957 3-1/2 84576 Z-9547 Z-9547L 3
68108 69116 2-11/16 6582C 8894 8994 2-15/16 6586 84858 84958 3-9/16 84576 Z-9548 Z-9548L 3-1/16
68110 69118 2-3/4 6582C 8896 8996 3 6586 84859 84959 3-5/8 84576 Z-9549 Z-9549L 3-1/8
68112 69120 2-13/16 6582C Z-1649 Z-1649L 3-1/16 RR10017S 84860 84960 3-11/16 84576 Z-9550 Z-9550L 3-1/4
68114 69122 2-7/8 6582C 8897 89100 3-1/8 6586 84861 84961 3-3/4 84576 Z-9552 3-5/16
68116 69124 2-15/16 6582C Z-1651 Z-1651L 3-3/16 RR10017S 84862 84962 3-13/16 84576 Z-9553 3-3/8
68118 69126 3 6582C 8897A 89104 3-1/4 6586 84863 84963 3-7/8 84576 Z-9554 3-1/2
Z-1653 Z-1653L 3-5/16 RR10017S 84864 84964 3-15/16 84576 Z-9556 3-5/8
8898 89108 3-3/8 6586 84865 84965 4 84578 Z-9558 3-3/4
Z-1655 Z-1655L 3-7/16 RR10017S 84866 84966 4-1/16 84578 Z-9560 3-7/8
8899 89112 3-1/2 6586 84867 84967 4-1/8 84578 Z-9562 4
Z-1657 Z-1657L 3-9/16 RR10019S 84868 84968 4-3/16 84578 Z-9564
88116 89116 3-5/8 6587 84869 84969 4-1/4 84578
Z-1659 Z-1659L 3-11/16 RR10019S 84870 84970 4-5/16 84578
88120 89120 3-3/4 6587 84871 84971 4-3/8 84578
Z-1661 Z-1661L 3-13/16 RR10019S 84872 84972 4-7/16 84578
88124 89124 3-7/8 6587 84874 84974 4-1/2 84578
Z-1663 Z-1663L 3-15/16 RR10019S 84876 84976 4-5/8 84578
88128 89128 4 6587 84878 Z-2478L 4-3/4 84578
Z-1665 Z-1665L 4-1/16 RR10019S Z-2480 84980 4-7/8 RR10035S
88132 89132 4-1/8 6587 84882 Z-2482L 5 84578
Z-1667 Z-1667L 4-3/16 RR10019S Z-2483 Z-2483L 5-1/8 RR10035S
88136 89136 4-1/4 6587 84884 5-3/16 84578
Z-1669 Z-1669L 4-5/16 RR10019S 84886 Z-2486L 5-1/4 84578
Z-1670 Z-1670L 4-3/8 RR10019S 84888 5-3/8 84578
Z-1671 Z-1671L 4-7/16 RR10019S 84896 5-1/2 85578
88144 89144 4-1/2 6587 848104 6 85579
6-1/2

38

Impact Sockets

PURCHASE or RENT 2-1/2" Drive-Deep

2-1/2" Drive-Standard 6 Deep

6 Pt. Standard

Nom. Ret- Nom. Nom. Nom. Ret-
Stand. Size Ring Pin Stand. Size Ret- Deep Size Ret- Deep Size Ring
Item # (in.) Item # (in.) Ring Pin Item # (in.) Ring Pin Item # (in.) Pin
R40127 P40127
Z-4026 1-5/8 R40127 P40127 85842 5-1/4 85578 P40150 Z-4026L 1-5/8 R40127 P40127 Z-4084L 5-1/4 R40127 P40127
Z-4027 1-11/16 85576 85843 P40150 R40127 P40127 P40127
85814 1-3/4 R40127 P40127 85844 5-3/8 85578 Z-4027L 1-11/16 R40127 P40127 Z-4086L 5-3/8 R40127 P40127
Z-4029 1-13/16 85576 85845 P40150 R40127 P40127 P40150
85815 1-7/8 R40127 P40127 85846 5-1/2 85578 P40150 Z-4028L 1-3/4 R40127 P40127 Z-4088L 5-1/2 R40127 P40150
Z-4031 1-15/16 85576 Z-4094 R40127 P40127 P40150
85816 2 R40127 P40127 Z-4096 5-5/8 85578 P40175 Z-4029L 1-13/16 R40127 P40127 Z-4090L 5-5/8 R40150 P40150
Z-4033 2-1/16 85576 85849 R40127 P40127 P40150
85817 2-1/8 R40127 P40127 Z-40100 5-3/4 85578 P40175 Z-4030L 1-7/8 R40127 P40127 Z-4092L 5-3/4 R40150 P40150
Z-4035 2-3/16 85576 Z-40102 P40175 R40127 P40127 P40150
85818 2-1/4 R40127 P40127 85852 5-7/8 R40150 P40175 Z-4031L 1-15/16 R40127 P40127 Z-4094L 5-7/8 R40150 P40150
Z-4037 2-5/16 85576 Z-40106 P40175 R40127 P40127 P40175
85819 2-3/8 R40127 P40127 85854 6 R40150 P40175 Z-4032L 2 R40127 P40127 Z-4096L 6 R40150 P40175
Z-4039 2-7/16 R40127 P40127 85855 R40127 P40127 P40175
Z-4040 2-1/2 85576 Z-40112 6-1/8 85578 P40175 Z-4033L 2-1/16 R40127 P40127 Z-4098L 6-1/8 R40150 P40175
85820A 2-9/16 85576 Z-40114 P40175 R40127 P40127 P40175
85821 2-5/8 R40127 P40127 Z-40116 6-1/4 R40150 P40175 Z-4034L 2-1/8 R40127 P40127 Z-40100L 6-1/4 R40150 P40175
Z-4043 2-11/16 85576 Z-40118 R40127 P40127 P40175
85822 2-3/4 R40127 P40127 Z-40120 6-3/8 R40150 P40175 Z-4035L 2-3/16 R40127 P40127 Z-40102L 6-3/8 R40150 P40175
Z-4045 2-13/16 R40127 P40127 85861 P40175 R40127 P40127 P40175
Z-4046 2-7/8 85576 Z-40124 6-1/2 85578 P40175 Z-4036L 2-1/4 R40127 P40127 Z-40104L 6-1/2 R40150 P40175
85823 2-15/16 85576 Z-40125 P40175 R40127 P40127 P40175
85824 3 R40127 P40127 Z-40126 6-5/8 R40175 P40175 Z-4037L 2-5/16 R40127 P40127 Z-40106L 6-5/8 R40175 P40175
Z-4049 3-1/16 85576 85864 P40175 R40127 P40127 P40175
85825 3-1/8 R40127 P40127 Z-40130 6-3/4 85580 P40175 Z-4038L 2-3/8 R40127 P40127 Z-40108L 6-3/4 R40175 P40175
Z-4051 3-3/16 85576 Z-40132 P40175 R40127 P40127 P40175
85826 3-1/4 R40127 P40127 Z-40134 6-7/8 85580 P40175 Z-4039L 2-7/16 R40127 P40127 Z-40110L 6-7/8 R40150 P40175
Z-4053 3-5/16 85576 Z-40136 R40127 P40127 P40175
85827 3-3/8 R40127 P40127 Z-40140 7 R40175 Z-4040L 2-1/2 R40127 P40127 Z-40112L 7 R40175 P40175
Z-4055 3-7/16 85576 Z-40142 R40127 P40127 P40175
85828 3-1/2 R40127 P40127 Z-40144 7-1/8 R40175 Z-4041L 2-9/16 R40127 P40127 Z-40114L 7-1/8 R40175 P40175
Z-4057 3-9/16 85576 Z-40146 R40127 P40127 P40175
85829 3-5/8 R40127 P40127 Z-40148 7-1/4 R40175 Z-4042L 2-5/8 R40127 P40127 Z-40116L 7-1/4 R40175 P40175
Z-4059 3-11/16 85578 R40127 P40127
85830 3-3/4 R40127 P40127 7-3/8 R40175 Z-4043L 2-11/16 R40127 P40127 Z-40118L 7-3/8 R40175
Z-4061 3-13/16 85578 R40127 P40127
85831 3-7/8 R40127 P40127 7-1/2 R40175 Z-4044L 2-3/4 R40127 P40127 Z-40120L 7-1/2 R40175
Z-4063 3-15/16 85578 R40127 P40127
85832 4 R40127 P40127 7-5/8 85580 Z-4045L 2-13/16 R40127 P40127 Z-40122L 7-5/8 R40175
Z-4065 4-1/16 85578 R40127 P40127
85833 4-1/8 R40127 P40127 7-3/4 R40175 Z-4046L 2-7/8 R40127 P40127 Z-40124L 7-3/4 R40175
Z-4067 4-3/16 85578 R40127 P40127
85834 4-1/4 R40127 P40127 7-13/16 R40175 Z-4047L 2-15/16 R40127 P40127 Z-40125L 7-13/16 R40175
Z-4069 4-5/16 85578 R40127 P40127
85835 4-3/8 R40127 P40127 7-7/8 R40175 Z-4048L 3 R40127 P40127 Z-40126L 7-7/8 R40175
Z-4071 4-7/16 85578 R40127 P40127
85836 4-1/2 85578 8 85580 Z-4049L 3-1/16 R40127 P40127 Z-40128L 8 R40175
85837 4-5/8 85578 R40127 P40127
85838 4-3/4 85578 8-1/8 R40175 Z-4050L 3-1/8 R40127 P40127 Z-40130L 8-1/8 R40175
85839 4-7/8 85578 R40127 P40127
85840 5 85578 8-1/4 R40175 Z-4051L 3-3/16 R40127 P40127 Z-40132L 8-1/4 R40175
85841 5-1/8 R40127 P40127 R40127 P40127
Z-4083 5-3/16 8-3/8 R40175 Z-4052L 3-1/4 R40127 P40127 Z-40134L 8-3/8 R40175

8-1/2 R40175 Z-4053L 3-5/16 Z-40136L 8-1/2 R40175

8-3/4 R40175 Z-4054L 3-3/8 Z-40140L 8-3/4 R40175

8-7/8 R40175 Z-4055L 3-7/16 Z-40142L 8-7/8 R40175

9 R40175 Z-4056L 3-1/2 Z-40144L 9 R40175

9-1/8 R40175 Z-4057L 3-9/16 Z-40146L 9-1/8 R40175

9-1/4 R40175 Z-4058L 3-5/8 Z-40148L 9-1/4 R40175

Z-4059L 3-11/16

Z-4060L 3-3/4 PURCHASE ONLY

Z-4061L 3-13/16

Z-4062L 3-7/8

Z-4063L 3-15/16

Z-4064L 4

Z-4065L 4-1/16

Z-4066L 4-1/8 3-1/2"
Square Drive
Z-4067L 4-3/16 Available Upon

Z-4068L 4-1/4 Request

Z-4069L 4-5/16

Z-4070L 4-3/8

Z-4071L 4-7/16

Z-4072L 4-1/2

Z-4074L 4-5/8

Z-4076L 4-3/4

Z-4078L 4-7/8

Z-4080L 5

Z-4082L 5-1/8

Z-4083L 5-3/16

877.446.4352 www.superiortoolrental.com www.midlandtool.com 39

40

Impact Universal Joint PURCHASE or RENT Impact Attachments
Impact Adapters
Impact Extensions

SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS
Drive Item # Description
Drive Item # Ret. Ring Ret. Ring Drive Item # Length Ret. Ring
6581 7" 6581
3/4" 6800 3/4" 6900 3/4” F x 1/2” M 6580 6907 10" 6581
6901 3/4” F x 1” M 6581 6910 13" 6581
3/4" 6913 24" 6581
1" 8800 6581A 1" 8900 1” F x 3/4” M 6583 69E24 36" 6581
1" 69E36 7" 6581A
8902 1” F x 1-1/2” M 6584 1-1/2" 8907 10" 6581A
#5 8910 13" 6581A
1-1/2" 84800 84575 84900 1-1/2” F x 1” M 84575 8913 24" 6581A
89E24 8" 84575
1-1/2" 84901 1-1/2” F x 2-1/2” M 84575 84908 12" 84575
84912 15" 84575
2-1/2" U4040 R40127 A4024 2-1/2” F x 1-1/2” M R40127 84915 8" -
2-1/2" A4056 2-1/2” F x 3-1/2” M R40127 E9508 15" -
#5 Spline 5800 - E9515 18" -
#5 5901 #5 F x 1” M – E9518

877.446.4352 www.superiortoolrental.com www.midlandtool.com 41

Chipping Hammers, Rivet Busters,
Clay Diggers, Rock Drills,
& Pavement Breakers

42

MADE INTHE USA Chipping Hammers

Mini Gooseneck Chipping Hammer Mini 4-Bolt Chipping Hammer 4-Bolt Chipping Hammer

CH-K2LR CH-M4BLT CH-4R

FEATURES FEATURES FEATURES

• Ideal for brick or mortar tear-out in hard to • For small jobs that require a hard hitting tool. • Nearly indestructible and designed for any
reach areas and overhead applications. • .680 round shank oval collar industrial tear-out application.

• .680 round shank oval collar • .680 round shank oval collar

SPECIFICATIONS 3600 SPECIFICATIONS 2750 SPECIFICATIONS 1700
1-3/4" 2.6" 4-1/4"
Blows Per Minute 7/8" Blows Per Minute 1.1" Blows Per Minute 1-1/8"
Piston Stroke 8 lbs. Piston Stroke 10.5 lbs. Piston Stroke 20 lbs.
Bore 11-3/4" Bore 11-3/4" Bore 15-1/2"
Weight 18 cfm Weight 18 cfm Weight 30 cfm
Length Length Length
Avg. Air Cons. Avg. Air Cons. Avg. Air Cons.

Accessories

1190 Series Solid Type Lock Spring
Chisel Retainer 1194-2
Bushing Tool (Round)
1190-CPT1 (Gooseneck)
1190-SUL1 (4-Bolt)

.680 round shank oval collar.

Blade Style

Oval Collar 3/4" Flat Chisel (Round) Moil Point (Round)

Retainer Type

9" 303 313ST 50100
12" 303-12 315 -
18" 303-18 315-18 -
24" 303-24 315-24 -
36" 303-36 315-36 -
48" 303-48 315-48 -
60" 303-60 315-60 -
72" 303-72 315-72 -
84" 303-84 315-84 -
96" 303-96 315-96 -
120" 303-120 315-120 -
144" 303-144 315-144 -
192" 303-192 315-192 -
216" 303-216 315-216 -

Heavy Duty Hose MADE INTHE USA FEATURES

877.446.4352 www.superiortoolrental.com • Dixon Fittings 43
• Swivel End
• Double Banded
• Made in the USA
Refer to page 129
for Hoses and Fittings

www.midlandtool.com

Rivet Busters MADE INTHE USA

ALL PARTS INTERCHANGEABLE EXCLUDING PISTON BARREL

4" Gooseneck Rivet Buster 6" Gooseneck Rivet Buster

RB-4181-4 RB-4181-6

SPECIFICATIONS 1350 Weight 23 lbs. SPECIFICATIONS 1200 Weight 25 lbs.
4" Length 18-1/4" 6" Length 20-1/4"
Blows Per Minute 1-3/16" Avg. Air Cons. 40 cfm Blows Per Minute 1-3/16" Avg. Air Cons. 40 cfm
Piston Stroke Piston Stroke
Bore Bore

11" Gooseneck Rivet Buster 14" Gooseneck Rivet Buster

SPECIFICATIONS 720 RB-4181-11 34 lbs. SPECIFICATIONS 700 RB-4181-14 39 lbs.
11" 25" 14" 30"
Blows Per Minute 1-3/16" Weight 52 cfm Blows Per Minute 1-3/16" Weight 52 cfm
Piston Stroke Length Piston Stroke Length
Bore Avg. Air Cons. Bore Avg. Air Cons.

11" D-Handle Rivet Buster 11" T-Handle Rivet Buster

RB-1133 RB-4181-11T

SPECIFICATIONS 850 Weight 34 lbs. SPECIFICATIONS 720 Weight 42 lbs.
11" Length 25" 11" Length 36"
Blows Per Minute 1-3/16" Avg. Air Cons. 52 cfm Blows Per Minute 1-3/16" Avg. Air Cons. 52 cfm
Piston Stroke Piston Stroke
Bore Bore

Accessories MADE INTHE USA

ALL ACCESSORIES FOR PURCHASE ONLY

Retainer Parts 2000 Series Replacment Retainer Parts Type Part No.
Retainer for RB-4181 2190 -2.557
Chisel, Sleeves and Retainer Lock Rubber Lower Upper Retainer for RB-1133 1851-1133
Bumper Assembly Upper Sleeve Spring Bumper Sleeve Sleeve Lock Spring 2194
Upper Sleeve 2101
Rubber Bumper Lower Sleeve 2103
Lower Sleeve Rubber Bumper 2104

Standard Chisel Moil Point Back Out Punch & Long Clearance Back Out Punch Rivet Buster Handle

for cutting loose rivets for concrete demolition for backing out tight rivits for long clearance punches

Length 2000 Series Length 2000 Series Back Length 2000 Series Back Length 2000 Series
Jumbo Extra Jumbo Extra Out Jumbo Extra Out Jumbo Extra
Heavy-Duty Heavy-Duty Punch Heavy-Duty Punch Heavy-Duty
1/2"
9" 2005 9" 2011 5/8" 9" 2019 9" 2020
12" 2005-12 12" 2011-12 9" 2007
18" 2005-18 18" 2011-18 3/4" 9" 2024-4LC 1" 9" 2028-4LC
24" 2005-24 24" 2011-24 11" 2024-6LC 11" 2028-6LC
36" 2005-36 36" 2011-36 7/8" 13" 2024-8LC
48" 2005-48 48" 2011-48 9" 2008BP 13" 2028-8LC
60" 2005-60 60" 2011-60 9" 2025-4LC
72" 2005-72 72" 2011-72 11" 2025-6LC 9" 2021BP
96" 2005-96 96" 2011-96 13" 2025-8LC
120" 2005-120 120" 2011-120 9" 2009 1-1/8" 9" 2029-4LC
144" 2005-144 144" 2011-144 9" 2026-4LC 11" 2029-6LC
168" 2005-168 168" 2011-168 11" 2026-6LC Placement
192" 2005-192 192" 2011-192 13" 2026-8LC 13" 2029-8LC 360° rotation
216" 2005-216 216" 2011-16 along any part
of the barrel.
Handle designed to fit
all of our Rivet Busters.

44

Pavement Breakers Clay DigPgaevresm&enRtoBcrkeDakreilrlss,

Roto-Hammers

CP-9A ST-115
Rock Drills

PB-30 PB-60 PB-90

SPECIFICATIONS PB-30 PB-60 PB-90 RD-30-78 RD-60-1
1200
Item # 1550 1400 6-1/2" SPECIFICATIONS
3-3/8" 5" 1-1/4 x 6"
Blows Per Minute 1" x 4-1/4" 91 lbs.
Piston Stroke 33 lbs. 1-1/4 x 6" 28-3/4"
Shank Size 22-1/2" 66 lbs. 3/4”
Weight 1/2” 25-3/8" 75 cfm
Length 39 cfm 3/4”
Rec’d Hose Size 58 cfm
Avg. Air Cons.

Item # CP-9A ST-115 RD-30-78 RD-60-1

Shank Size CP Round 7/8" x 3-1/4" 7/8" x 3-1/4" 1" x 4-1/4"
Weight 8 lbs. 15 lbs. 30 lbs. 60 lbs.
Length 14-3/4" 18-3/4" 18-1/2" 24"
Avg. Air Cons. 20 cfm 35 cfm 50 cfm 60 cfm

CD-78

30 lb. Clay Digger is ideal for any vertical or
trenching applications. The “T” handle provides
the operator more leverage for demo applications.

SPECIFICATIONS

Item # CD-78 CDT-78

Shank Size 7/8" x 3-1/4" 7/8" x 3-1/4" CDT-78
Weight 30 lbs. 30 lbs.
Length 22-1/2" 23-1/2"
Avg. Air Cons. 47 cfm 47 cfm

Ready for Shipment

877.446.4352 www.superiortoolrental.com www.midlandtool.com 45

CPalavyemDeigngteBrrAecackeesrso&ries 3" Chisel

Narrow Chisel & Moil Point (Standard)

Shank Size Length Chisels Moil Point Shank Size Length Under Collar Item #
Under Collar Item # Item # 7/8" x 3-1/4"
14" 934
14" 923NC 1011 1" x 4-1/4" 18" 935WC
18" 924 1012 1-1/4" x 6" 24" 935-2
24" 924-2 1012-2 36" 935-3
36" 924-3 1012-3
48" 924-4 1012-4 14" 936
60" 924-5 1012-5 18" 937
72" 924-6 1012-6 24" 937-2
96" 924-8 1012-8 36" 937-3
120" 924-10 1012-10 14" 1042W
144" 924-12 1012-12 18" 1043
168" 924-14 1012-14 24" 1043-2
192" 924-16 1012-16 36" 1043-3
216" 924-18 1012-18
7/8" x 3-1/4" 240" 924-20 1012-20 Bushing Tool - 16 Teeth (2" x 2" Face)
1" x 4-1/4" 14" 925 1013
1-1/4" x 6" 18" 926 1014 Shank Size Length Under Collar Item #
24" 926-2 1014-2 7/8" x 3-1/4" 9"
36" 926-3 1014-3 846
48" 926-4 1014-4 1" x 4-1/4" 847
60" 926-5 1014-5 1-1/4" x 6" 849
72" 926-6 1014-6
96" 926-8 1014-8 Clay Spade (5-1/2" Width x 8-1/2" Blade Length)
120" 926-10 1014-10
144" 926-12 1014-12 Shank Size Length Under Collar Item #
168" 926-14 1014-14 16-1/2"
192" 926-16 1014-16 7/8" x 3-1/4" 982
216" 926-18 1014-18 1" x 4-1/4" 972
240" 926-20 1014-20 1-1/4" x 6" 1077
14" 1034 1023
18" 1035 1024 Asphalt Cutter (5" Width x 6" Blade Length)
24" 1035-2 1024-2
36" 1035-3 1024-3 Shank Size Length Under Collar Item #
48" 1035-4 1024-4 7/8" x 3-1/4"
60" 1035-5 1024-5 11" 942
72" 1035-6 1024-6 1" x 4-1/4" 12" 943
84" 1035-7 1024-7 1-1/4" x 6" 12" 1046
96" 1035-8 1024-8
120" 1035-10 1024-10
144" 1035-12 1024-12
168" 1035-14 1024-14
192" 1035-16 1024-16
216" 1035-18 1024-18
240" 1035-20 1024-20

46

Carbide Tipped Drills (Whirley Bits) Rock Drill Steel

Rock Drill Steels

7/8" x 3-1/4" Hex Shank 1" x 4-1/4" Hex Shank

Length Length Length 7/8" hex x 3-1/4" 1" hex x 4-1/4"
Item # Under Size Drill Item # Under Size Drill Under Steel Shank Size Steel Shank Size
Collar Depth Collar Depth Collar
“H” Thread “H” Thread
546 9" 6" 550-12SPL 12" 9" 1 ft. Part No. Part No.
1-1/2 ft.
546-12 12" 5/8" 9" 550-18SPL 18" 3/4" 15" 2 ft. 731-H 141-H
546-18 18" 15" 550-24SPL 24" 21" 2-1/2 ft. 73112-H 14112-H
3 ft. 732-H 142-H
546-24 24" 21" 550-30SPL 30" 27" 4 ft. 73212-H 14212-H
5 ft. 733-H 143-H
550 9" 6" 551-12SPL 12" 9" 6 ft. 734-H 144-H
8 ft. 735-H 145-H
550-12 12" 9" 551-18SPL 18" 7/8" 15" 10 ft. 736-H 146-H
550-18 18" 3/4" 15" 551-24SPL 24" 21" 12 ft. 738-H 148-H
7310-H 1410-H
550-24 24" 21" 551-30SPL 30" 27" 7312-H 1412-H

550-30 30" 27" 552-12SPL 12" 9"

551 9" 6" 552-18SPL 18" 15"
552-24SPL 24" 1" 21"
551-12 12" 9"

551-18 18" 7/8" 15" 552-30SPL 30" 27"

551-24 24" 21" 553-12SPL 12" 9" Drill Steel Extensions

551-30 30" 27" 553-18SPL 18" 1-1/8" 15"
553-24SPL 24" 21"
552 9" 6"

552-12 12" 9" 553-30SPL 30" 27"

552-18 18" 1" 15" 554-12SPL 12" 9" Model TH-30
“H” Threaded Coupling
552-24 24" 21" 554-18SPL 18" 1-1/4" 15"
554-24SPL 24" 21"
552-30 30" 27" Item # Overall Length Thread

553-12 12" 9" 554-30SPL 30" 27" 522-2EXT 24" H
522-3EXT 36" H
553-18 18" 15" 555-12SPL 12" 9" 522-4EXT 48" H
553-24 24" 1-1/8" 21" 522-5EXT 60" H
555-18SPL 18" 1-3/8" 15" 522-6EXT 72" H
553-30 30" 27" 555-24SPL 24" 21" 522-8EXT 96" H

554-12 12" 9" 555-30SPL 30" 27"

554-18 18" 1-1/4" 15" 556-12SPL 12" 9"
554-24 24" 21"
556-18SPL 18" 1-1/2" 15" Threaded Rock Bits
554-30 30" 27" 556-24SPL 24" 21"

555-12 12" 9" 556-30SPL 30" 27" Carbide
Insert
555-18 18" 1-3/8" 15" All Steel
555-24 24" 21"
Carbide Bit Carbide Bit
555-30 30" 27" Steel Bit Single-Use Multi-Use*
Bit Size “H” Thread “H” Thread “H” Thread
556-12 12" 9" Diameter Item # Item # Item #

556-18 18" 1-1/2" 15" 1-3/8" LH35SH HSC138 T1207M0
556-24 24" 21" 1-1/2" LH38SH HSC112 T1507M0
1-5/8" LH41SH HSC158 T1607M0
556-30 30" 27" 1-3/4" LH44SH HSC134 T1707M0
1-7/8" LH47SH T1907M0
2" LH50SH HSC200 T2007M0
2-1/4" LH57SH T2207M0
2-1/2" LH63SH T2507M0
2-5/8" LH66SH
2-3/4" HC234
3" T3007M0

*Multi-use carbide bits are designed for multiple
resharpening
In stock

877.446.4352 www.superiortoolrental.com www.midlandtool.com 47

Steel

BITS FOR PURCHASE ONLY

FEATURES

• Lengths of points, chisels & steel in stock up to 20 feet
• Used in blast furnace, stove, and refractory repairs

DIMENSIONS

Chipping Hammer Rivet Busters Pavement Breakers Rock Drills
Length 9" – 216" Length 10" – 216" Length 14" – 240" Length 24" – 144"

8'

6'
5'

48

Hydraulic, Pneumatic & Manual
Bolting

Learn more about on-site bolting on page 56

877.446.4352 www.superiortoolrental.com www.midlandtool.com 49

Torque Wrenches

3/4" Square Drive Hydraulic Torque Wrench PRESSURE/TORQUE CONVERSION

SPECIFICATIONS Always set pressure with tool and/or pump RUNNING and away from job.

Item # S1500X-3/4
Typical Socket Range 3/4" – 2"
Pump S1500X S3000 S11000 S25000 RT-50
Optional Allen 1/2" – 1" Pres.
Key Range (PSI) 195 Torque (Ft/Lbs)
235
Weight 7 lbs. 1,000 274 320 1,100 2,515 –
1,200 311 384 1,320 3,018 –
Torque Range Min. Max. 1,400 351 448 1,540 3,521 –
144 1,952 1,600 390 512 1,760 4,024 8,400
1,800 430 576 1,980 4,527 9,450
S1500X-3/4" 2,000 470 640 2,200 5,030 10,500
2,200 506 704 2,420 5,533 11,550
1" Square Drive Hydraulic Torque Wrench 2,400 546 768 2,640 6,036 12,600
2,600 586 832 2,860 6,539 13,650
SPECIFICATIONS 2,800 625 896 3,080 7,042 14,700
3,000 662 960 3,300 7,545 15,750
Item # S3000-1 3,200 702 1,024 3,520 8,048 16,800
Typical Socket Range 7/8" – 3-7/8" 3,400 741 1,088 3,740 8,551 17,850
3,600 781 1,152 3,960 9,054 18,900
Optional Allen 5/8" – 1-1/4" 3,800 821 1,216 4,180 9,557 19,950
Key Range 4,000 857 1,280 4,400 10,060 21,000
4,200 897 1,344 4,620 10,563 22,050
Weight 12.3 lbs. 4,400 937 1,408 4,840 11,066 23,100
4,600 97 6 1,472 5,060 11,569 24,150
Torque Range Min. Max. 4,800 1,016 1,536 5,280 12,072 25,200
323 3,200 5,000 1,053 1,600 5,500 12,575 26,250
5,200 1,092 1,664 5,720 13,078 27,300
S3000-1" 5,400 1,132 1,728 5,940 13,581 28,350
5,600 1,171 1,792 6,160 14,084 29,400
1-1/2" Square Drive Hydraulic Torque Wrench 5,800 1,211 1,856 6,380 14,587 30,450
6,000 1,248 1,920 6,600 15,090 31,500
SPECIFICATIONS 6,200 1,287 1,984 6,820 15,593 32,550
6,400 1,327 2,048 7,040 16,096 33,600
Item # S11000-1-1/2 6,600 1,367 2,112 7,260 16,599 34,650
Typical Socket Range 1-5/8" – 6-1/4" 6,800 1,406 2,176 7,480 17,102 35,700
7,000 1,443 2,240 7,700 17,605 36,750
Optional Allen 1-1/4" – 1-3/4" 7,200 1,483 2,304 7,920 18,108 37,800
Key Range 7,400 1,522 2,368 8,140 18,611 38,850
7,600 1,562 2,432 8,360 19,114 39,900
Weight 34.67 lbs 7,800 1,602 2,496 8,580 19,617 40,950
8,000 1,638 2,560 8,800 20,120 42,000
Torque Range Min. Max. 8,200 1,678 2,624 9,020 20,623 43,050
1,100 11,000 8,400 1,718 2,688 9,240 21,126 44,100
8,600 1,757 2,752 9,460 21,629 45,150
S11000-1-1/2" 8,800 1,794 2,816 9,680 22,132 46,200
9,000 1,834 2,880 9,900 22,635 47,250
2-1/2" Square Drive Hydraulic Torque Wrench 9,200 1,873 2,944 10,120 23,138 48,300
9,400 1,913 3,008 10,340 23,641 49,350
Specifications 9,600 1,952 3,072 10,560 24,144 50,400
9,800 3,136 10,780 24,647 51,450
Item # S25000-2-1/2 10,000 3,200 11,000 25,150 52,500
Typical Socket Range 2-3/8" – 10"

Optional Allen 1-1/2" – 2-1/4"
Key Range

Weight 70.8 lbs.

Torque Range Min. Max.
2,515 25,150

S25000-2-1/2"

RT-50 Series Torque Wrench 2-1/2"

SPECIFICATIONS

Item # RT-50 ALL HYDRAULIC TORQUE
Typical Socket Range 2-3/8" – 10" WRENCH PUMPS SET TO
10,000 PSI UPON RENTAL
Weight 96 lbs. DELIVERY, DIAL DOWN
ACCORDINGLY
Torque Range Min. Max.
7,875 52,500

RT-50

50