2019 Resource Guide

SRS-Series, Extended Reaction Arms Accessories & Pumps

ENTERPAC Portable Electric Torque Wrench Pump

• Lightweight interchangeable design PMU10427Q

Wrench Max. Model ENTERPAC Dimensions (in) Wt.
Model Torque No. A B C D E (lbs.)*
SPECIFICATIONS
1328 SRS151 3.81 3.43 5.04 0.94 1.34 1.8
For Use Maximum Pressure Oil(Finl3o/wminR)ate Usable Electric Weight
S1500X 1210 SRS152 4.80 3.86 5.47 0.94 1.34 2.2 with Rating (psi) S1tsatge S2tnadge Oil Motor (lbs)
1131 SRS153 5.47 4.29 5.90 0.94 1.34 2.6 200 20 115V- 53
Torque St1asgt e S2tangde Capacity
2890 SRS301 4.37 4.09 6.69 1.34 1.89 3.5 Wrenches (gal) 1 ph
.50 -50/60Hz
S3000 2738 SRS302 5.39 4.69 7.28 1.34 1.89 4.4 S3000X 700 10,000
2636 SRS303 6.38 5.24 7.87 1.34 1.89 4.4 W2000X
W4000X
10805 SRS1101 5.94 6.22 2.33 1.81 2.99 9.7
ZU4T Electric Torque Wrench Pumps
S11000 10294 SRS1102 6.93 6.81 9.17 1.81 2.99 11.2

9874 SRS1103 7.91 7.36 10.31 1.81 2.99 12.8 2 port manifold 2 port manifold w/cage 4 port manifold

24736 SRS2501 7.20 8.86 12.36 1.97 3.94 16.8
S25000 23638 SRS2502 8.19 9.45 12.95 1.97 3.94 18.1
22680 SRS2503 9.17 10.00 13.54 1.97 3.94 22.0

* Weights indicated are for the accessories only and do not include the wrench.

ENTERPAC

RTE- Series, Reaction Tube Extensions

• Full torque rated ENTERPAC SPECIFICATIONS
• Increases tool fit in For Use With
All Wrenches
restricted access Motor Electrical Spec.
areas Usable Oil Capacity 115 V-1 ph
Weight 1.0 gal
Torque Wrench Item # Dimensions (in) Wt. Motor Size 73 lb
1.7 hp
Item # A B C D E (lbs.)* Output Flow Rate (in3/min) (psi)

S1500X RTE15 27.80 5.98 25.04 2.28 23.62 10.1

S3000 RTE30 28.86 5.98 25.47 2.24 23.62 12.1

S11000 RTE110 30.28 5.98 26.57 2.99 23.62 24.7 100 psi 700 psi 5,000 psi 10,000 psi
S25000 RTE250 32.01 5.98 26.97 3.94 23.62 38.1 700 535 76 60

RT-50 – ––––– – Relief Valve Adjustment Range 1,800-10,000 psi

* Weights indicated are for the accessories only and do not include the wrench.

Torque Wrench Dimensions (in) Pneumatic Hydraulic Torque Wrench Pumps

PTA-1404-Q ZA4204TX-Q

SPECIFICATIONS

For Use Maximum Item # Reservoir Useable Pump Flow Rates Air Air Releif Weight
with Pressure Capacity Oil (in3/min) Cons. Press. Valve with
(psi) Range Adjmt. Oil
Item # A B C D E F G H Weight Torque Rating Capacity St1asgte S2tnadge Range (lbs.)
Wrenches (psi)

(lb.) S1500X PTA-
S2000X 1404-Q
S1500X- 3/4" 1.55 2.54 4.24 3.74 5.35 0.99 2.72 4.69 5.95 S3000X 10,000 1.0 0.5 240 20 40 49-101 - 54
S4000X
S3000-1" 1.91 3.14 5.28 4.96 6.77 1.30 3.54 6.26 11.02
Output Flow Rate
S11000-1-1/2" 2.81 4.48 7.71 7.35 8.98 1.95 5.22 8.98 33.07 For all (in3/min)
S&W ZA4204
S25000-2-1/2" 3.48 5.63 9.62 9.50 11.31 2.52 7.16 11.46 68.34 Series 10,000 TX-Q - 1.0 1p0s0i 7p0s0i 5,p0s0i0 10p,s0i00 20-100 60-100 1,400- 94
10,000
RT-50-2-1/2" 6.5 8.9 14 11.4 23.9 30.8 15.2 20.375 135 600 500 80 60

877.446.4352 www.superiortoolrental.com www.midlandtool.com 51

Torque Wrenches

2,000 ft lbs Low Profile Hydraulic Torque Wrench 4,000 ft lbs Low Profile Hydraulic Torque Wrench

W2000 Series Imperial Cassettes & Reducer Inserts W4000 Series Imperial Cassettes & Reducer Inserts

SPECIFICATIONS SPECIFICATIONS

Maximum Torque 2,000 ft. lbs Maximum Torque 4,000 ft. lbs
at 10,000 psi 1-1/8" –2-3/8" at 10,000 psi
Hexagon Range
Maximum Operating 10,000 psi Hexagon Range 1-15/16" – 3-3/8"
Pressure
Maximum Operating 10,000 psi
Pressure

W2000 W4000

Hex. Item # Hex. Item # Hex. Item # Hex. Item # Hex. Item # Hex. Item # Hex. Item # Hex. Item #
Size Reducer Reducer Reducer Size Reducer Reducer Reducer
(in) (in) (in) (in) (in) (in) (in) (in)

11/8 W2102 – – –– – – 15/16 W4105 – – –– – –

13/16 W2103 – – –– – – 13/8 W4106 – – –– – –

11/4 W2104 – – –– – – 17/16 W4107 – – –– – –

15/16 W2105 – – –– – – 11/2 W4108 – – –– – –

13/8 W2106 – – –– – – 19/16 W4109 – – –– – –

17/16 W2107 17/16 - 11/8 W2107R102 – – – – 15/8 W4110 – – –– – –

11/2 W2108 – – –– – – 111/16 W4111 – – –– – –

19/16 W2109 – – –– – – 13/4 W4112 – – –– – –

15/8 W2110 15/8 - 11/4 W2110R104 15/8 - 13/16 W2110R103 – – 113/16 W4113 – – –– – –

111/16 W2111 – – –– – – 17/8 W4114 – – –– – –

13/4 W2112 – – –– – – 115/16 W4115 – – –– – –

113/16 W2113 113/16 - 17/16 W2113R107 113/16 - 11/4 W2113R104 – – 2 W4200 2 - 17/8 W4200R107 – – – –

17/8 W2114 – – –– – – 21/16 W4201 – – –– – –

115/16 W2115 – – –– – – 21/8 W4202 – – –– – –

2 W2200 2 - 15/8 W2200R110 2 - 17/16 W2200R107 – – 23/16 W4203 23/16 - 15/8 W4203R110 23/16 -17/16 W4203R107 23/16 -11/4 W4203R104

21/16 W2201 – – –– – – 21/4 W4204 – – –– – –

21/8 W2202 – – –– – – 25/16 W4205 – – –– – –

2 3/16 W2203 23/16 - 113/16 W2203R113 23/16 - 15/8 W2203R110 23/16 - 17/16 W2203R107 23/8 W4206 23/8 - 2 W4206R200 23/8 -113/16 W4206R113 23/8 -17/16 W4206R107

21/4 W2204 – – –– – – – – 23/8 - 13/8 W4206R106 – – – –

25/16 W2205 – – –– – – 27/16 W4207 27/16 - 2 W4207R200 – – – –

23/8 W2206 23/8 - 2 W2206R200 23/8 - 17/8 W2206R114 23/8 - 113/16 W2206R113 21/2 W4208 21/2 - 2 W4208R200 21/2 -113/16 W4208R113 21/2 - 21/16 W4208R201

– – 23/8 - 11/2 W2206R108 23/8 - 17/16 W2206R107 23/8 - 15/8 W2206R110 29/16 W4209 29/16 - 23/16 W4209R203 29/16 -21/8 W4209R202 – –

– – 29/16 - 2 W4209R200 29/16 -113/16 W4209R113 – –

360° Swivel Rotation & 160° Tilt 25/8 W4210 – – –– – –

211/16 W4211 – – –– – –

23/4 W4212 23/4 - 23/8 W4212R206 23/4 -13/16 W4212R203 23/4 - 21/8 W4212R202

213/16 W4213 – – –– – –

27/8 W4214 – – –– – –

215/16 W4215 215/16 -29/16 W4215R209 215/4 -23/8 W4215R206 215/16 -23/16 W4215R203

– – 215/16 - 2 W4215R200 – – – –

3 W4300 3 - 23/16 W4300R203 – – – –

31/16 W4301 – – –– – –

31/8 W4302 31/8 - 215/16 W4302R215 31/8 -23/4 W4302R212 31/8 - 29/16 W4302R209

– – 31/8 - 23/8 W4302R206 31/8 -25/16 W4302R205 31/8 - 21/4 W4302R204

– – 31/8 - 23/16 W4302R203 31/8 -21/8 W4302R202 31/8 - 2 W4302R200

33/16 W4303 – – –– – –

31/4 W4304 – – –– – –

35/16 W4305 – – –– – –

33/8 W4306 – – –– – –

52

Torque Wrenches

8,000 ft lbs Low Profile Hydraulic Torque Wrench 15,000 ft lbs Low Profile Hydraulic Torque Wrench

W8000 Series Imperial Cassettes & Reducer Inserts W15000 Series Imperial Cassettes & Reducer Inserts

SPECIFICATIONS SPECIFICATIONS

Maximum Torque 8,000 ft. lbs Maximum Torque 15,000 ft. lbs
at 10,000 psi 1-7/8" – 4-1/8" at 10,000 psi
Hexagon Range
Maximum Operating 10,000 psi Hexagon Range 2-7/16" – 4-5/8"
Pressure
Maximum Operating 10,000 psi
Pressure

W8000 W15000

Hex. Item # Hex. Item # Hex. Item # Hex. Item # Hex. Item # Hex. Item # Hex. Item # Hex. Item #
Size Reducer No. Reducer No. Reducer No. Size Reducer Reducer Reducer
(in) (in) (in) (in) (in) (in) (in) (in)

17/8 W8114 – – –– – – 27/16 W15207 – – –– – –

115/16 W8115 – – –– – – 21/2 W15208 – – –– – –

2 W8200 – – –– – – 29/16 W15209 – – –– – –

21/16 W8201 – – –– – – 25/8 W15210 – – –– – –

21/8 W8202 – – –– – – 211/16 W15211 – – –– – –

23/16 W8203 – – –– – – 23/4 W15212 – – –– – –

21/4 W8204 – – –– – – 213/16 W15213 – – –– – –

25/16 W8205 – – –– – – 27/8 W15214 – – –– – –

23/8 W8206 – – –– – – 215/16 W15215 – – –– – –

27/16 W8207 – – –– – – 3 W15300 3 - 21/8 W15300R202 – – – –

21/2 W8208 – – –– – – 31/16 W15301 – – –– – –

29/16 W8209 29/16 - 2 W8209R200 – – – – 31/8 W15302 31/8 - 29/16 W15302R209 – – – –

25/8 W8210 – – –– – – 33/16 W15303 – – –– – –

211/16 W8211 – – –– – – 31/4 W15304 – – –– – –

23/4 W8212 23/4 - 23/16 W8212R203 35/16 W15305 – – –– – –

213/16 W8213 – – –– – – 33/8 W15306 – – –– – –

27/8 W8214 – – –– – – 37/16 W15307I – – – – – –

215/16 W8215 215/16 - 23/8 W8215R206 215/16 -13/16 W8215R203 31/2 W15308 31/2 -215/16 W15308R215 31/2 -23/4 W15308R212 – –

3 W8300 – – –– – – 39/16 W15309 – – –– – –

31/16 W8301 – – –– – – 35/8 W15310 – – –– – –

31/8 W8302 31/8 - 29/16 W8302R209 31/8 -23/8 W8302R206 31/8 - 23/16 W8302R203 311/16 W15311 – – –– – –

– – 31/8 - 2 W8302R200 – – – – 33/4 W15312 33/4 - 31/8 W15312R302 33/4 -215/16 W15312R215 – –

33/16 W8303 – – –– – – 313/16 W15313 – – –– – –

31/4 W8304 – – –– – – 37/8 W15314 37/8 - 31/8 W15314R302 37/8 -215/16 W15314R215 – –

35/16 W8305 – – –– – – 315/16 W15315 – – –– – –

33/8 W8306 – – –– – – 4 W15400 – – – – – –

37/16 W8307I – – –– – – 41/16 W15401I – – – – – –

31/2 W8308 31/2 - 3 W8308R300 31/2 -215/16 W8308R215 31/2 - 23/4 W8308R212 41/8 W15402 41/8 - 31/2 W15402R308 41/8 -35/16 W15402R305 41/8 - 31/4 W15402R304

39/16 W8309 – – –– – – 43/16 W15403I – – – – – –

35/8 W8310 – – –– – – 41/4 W15404 41/4 - 31/2 W15404R308 41/4 - 31/8 W15404R302 – –

311/16 W8311 – – –– – – 45/16 W15405 – – –– – –

33/4 W8312 33/4 - 31/8 W8312R302 33/4 -215/16 W8312R215 33/4 - 23/4 W8312R212 43/8 W15406 – – –– – –

313/16 W8313 – – –– – – 47/16 W15407 – – –– – –

37/8 W8314 37/8 - 31/8 W8314R302 37/8 -215/16 W8314R215 – – 41/2 W15408I – – – – – –
– –
315/16 W8315 – – –– 49/16 W15409I – – – – – –

4 W8400 – – –– – – 45/8 W15410I 45/8 - 315/16 W15410R315 45/8 -37/8 W15410R314 45/8 - 23/4 W15410R312

41/16 W8401I – – –– – – – – 45/8 - 31/2 W15410R308 – – – –

41/8 W8402 – – –– – –

877.446.4352 www.superiortoolrental.com www.midlandtool.com 53

Torque Wrenches

22,000 ft lbs Low Profile Hydraulic Torque Wrench 35,000 ft lbs Low Profile Hydraulic Torque Wrench
W35000 Series Imperial Cassettes & Reducer Inserts
W22000 Series Imperial Cassettes & Reducer Inserts

SPECIFICATIONS SPECIFICATIONS

Maximum Torque 22,000 ft. lbs Maximum Torque 35,000 ft. lbs
at 10,000 psi at 10,000 psi 3-1/8" – 6-1/8"
Hexagon Range
Hexagon Range 2-15/16" – 5-3/8" Maximum Operating 10,000 psi
Pressure
Maximum Operating 10,000 psi
Pressure

W22000 W35000

Hex. Item # Hex. Item # Hex. Item # Hex. Item # Hex. Item # Hex. Item #
Size Reducer Reducer Reducer Size Reducer
(in) (in) (in) (in) W35302 W35302R200
(in) W35303 (in) –
31/8 W35304 –
215/16 W22215 – – –– – – 33/16 W35305 31/8 - 2 –
31/4 W35306 – –
3 W22300 – – – – – – 35/16 W35307 – –
33/8 W35308 – –
31/16 W22301 – – –– – – 37/16 W35309 – –
31/2 W35310 – –
31/8 W22302 31/8 - 23/8 W22302R206 31/8 -23/16 W22302R203 – – 39/16 W35311 –
– – 35/8 W35312 – W35308R205
33/16 W22303 – – –– 311/16 W35313 – –
33/4 W35314 –
31/4 W22304 – – –– – – 313/16 W35315 31/2 - 25/16 –
37/8 W35400 – –
35/16 W22305 – – –– – – 315/16 W35401 – –
4 W35402 –
33/8 W22306 – – –– – – 41/16 W35403 – W35314R211
41/8 W35404 – W35315R213
37/16 W22307 – – –– – – 43/16 W35405
41/4 W35406 37/8 - 211/16 –
31/2 W22308 31/2 - 23/4 W22308R212 31/2 -29/16 W22308R209 31/2 - 23/8 W22308R206 45/16 W35407 315/16 - 213/16 –
43/8 W35408 –
39/16 W22309 – – –– – – 47/16 W35409 – –
41/2 W35410 – W35404R301
35/8 W22310 – – –– – – 49/16 W35412 – –
45/8 W35414 – –
311/16 W22311 – – –– – – 43/4 W35500 41/4 - 31/16 –
47/8 W35502 – –
33/4 W22312 33/4 -215/16 W22312R215 – – – – 5 W35503 – –
51/8 W35504 – W35500R400
313/16 W22313 – – 53/16 W35506 – W35502R402
51/4 W35508 – –
37/8 W22314 37/8 - 31/8 W22314R302 37/8 -215/16 W22314R215 37/8 - 23/4 W22314R212 53/8 W35509 5- 4 –
51/2 W35510 51/8 - 41/8 W35506R405
315/16 W22315 – – –– – – 59/16 W35512 – –
55/8 W35514 – –
4 W22400 – – – – – – 53/4 W35600 53/8 - 45/16 –
57/8 W35602 – W35512R412
41/16 W22401 – – –– – – 6 – W35514R414
61/8 – –
41/8 W22402 – – –– – – 53/4 - 43/4 W3560R502
57/8 - 47/8
43/16 W22403 – – –– – – –
61/8 - 51/8
41/4 W22404 41/4 - 31/2 W22404R308 41/4 - 31/8 W22404R302 41/4 -215/16 W22404R215

45/16 W22405 – – –– – –

43/8 W22406 – – –– – –

47/16 W22407 – – –– – –

41/2 W22408 – – –– – –

49/16 W22409 – – –– – –

45/8 W22410 45/8 - 37/8 W22410R314 45/8 -33/4 W22410R312 45/8 - 31/2 W22410R308

43/4 W22412 – – –– – –

47/8 W22414 – – –– – –

5 W22500 5 - 41/4 W22500R404 5 - 41/8 W22500R402 5 - 37/8 W22500R314

51/8 W22502 – – –– – –

53/16 W22503 – – –– – –

51/4 W22504 – – –– – –

53/8 W22506 53/8 - 45/8 W22506R410 53/8 - 41/4 W22506R404 53/8 - 41/8 W22506R402

– W22506 53/8 - 37/8 W22506R314 – – – –

54

Torque Wrenches

PRESSURE/TORQUE CONVERSION Accessores for W-Series
Torque Wrenches
Always set pressure with tool and/or pump RUNNING and away from job.
TPS
Pump W2000 W4000 W8000 W15000 W22000 W35000 WTE
Pres. WRP
(PSI) Torque (Ft/Lbs) Series

1,000 204 418 847 1,533 2,250 3,500 1 Hexagon Cassette
1,200 245 501 1016 1,840 2,700 4,200 2 Drive Unit
1,400 286 585 1,186 2,146 3,150 4,900 3 Pro Series Swivel
1,600 326 668 1,335 2,453 3,600 5,600 4 Extended Reaction Arm
1,800 367 752 1,525 2,759 4,050 6,300 5 Reducer Insert
2,000 408 835 1,694 3,066 4,500 7,000 6 Reaction Paddle
2,200 449 919 1,863 3,373 4,950 7,700
2,400 490 1002 2,033 3,679 5,400 8,400 TPS-Series, Pro Series Swivels
2,600 530 1,086 2,202 3,986 5,850 9,100
2,800 571 1,169 2,372 4,292 6,300 9,800 TSP-Series
3,000 612 1,253 2,541 4,599 6,750 10,500
3,200 653 1,336 2,710 4,906 7,200 11,200 • Featuring Tilt and Swivel technology
3,400 694 1,420 2,880 5,212 7,650 11,900 • 360º X-axis and 160º Y-axis rotation
3,600 734 1,503 3,049 5,519 8,100 12,600 • Increases tool fit in restricted access areas
3,800 775 1,587 3,219 5,825 8,550 13,300 • Simplifies hose placement
4,000 816 1,670 3,388 6,132 9,000 14,000
4,200 857 1,754 3,557 6,439 9,450 14,700 Torque Wrench Model No. Model No. Maximum Wt.
4,400 898 1,837 3,727 6,745 9,900 15,400 Presure (psi) (lbs)
4,600 938 1,921 3,896 7,052 10,350 16,100 .44
4,800 979 2,004 4,066 7,358 10,800 16,800 W2000, W4000 TSP100 10,000 .44
5,000 1020 2,088 4,235 7.665 11,250 17,500 W8000, W15000, W22000, W35000 TSP200 10,000
5,200 1061 2,171 4,404 7,972 11,700 18,200
5,400 1102 2,255 4,574 8,278 12,150 18,900 WTE-Series, Extended Reaction Arm
5,600 1142 2,338 4,743 8,585 12,600 19,600
5,800 1183 2,422 4,913 8,891 13,050 20,300 WTE-Series
6,000 1224 2,505 5,082 9,198 13,500 21,000
6,200 1265 2,589 5,251 9,505 13,950 21,700 • Full torque rated
6,400 1306 2,672 5,421 9,811 14,400 22,400 • Increases tool fit in restricted access areas
6,600 1346 2,756 5,590 10,118 14,850 23,100
6,800 1387 2,839 5,760 10,424 15,300 23,800 Torque Wrench Model No. DIMENSIONS (in) Wt.*
7,000 1428 2,923 5,929 10,731 15,750 24,500 Model No. A B C (lbs)
7,200 1469 2,006 6,098 11,038 16,200 25,200
7,400 1510 2,090 6,268 11,344 16,650 25,900 W2000 WTE20 2.20 15.67 2.99 5.73
7,600 1550 3,173 6,437 11,651 17,100 26,600 W4000 WTE40 2.60 17.17 2.91 10.14
7,800 1591 3,257 6,607 11,957 17,550 27,300 W8000 WTE80 3.35 17.68 2.60 16.75
8,000 1632 3,340 6,776 12,264 18,000 28,000 W150000 WTE150 4.02 19.61 2.84 26.46
8,200 1673 3,424 6,945 12,571 18,450 28,700 W350000 WTE350 5.00 16.48 5.23 39.17
8,400 1714 3,507 7,115 12,877 18,900 29,400 * Weights indicated are for the accessories only and do not include the wrench
8,600 1754 3,591 7,284 13,184 19,350 30.100
8,800 1795 3,674 7,454 13,490 19,800 30,800 WRP-Series, Low Profile Reaction Paddles
9,000 1836 3,758 7,623 13,797 20,250 31,500
9,200 1877 3,841 7,792 14,104 20,700 32,200 WRP-Series
9,400 1918 3,925 7,962 14,410 21,150 32,900
9,600 1958 3,008 8,131 14,717 21,600 33,600
9,800 1999 3,092 8,301 15,023 22,050 34,300
10,000 2040 4,175 8,470 15,330 22,500 35,000

ALL HYDRAULIC TORQUE • Lightweight interchangeable design
WRENCH PUMPS SET TO 10,000 • Allows for offset reaction when in-line reaction
PSI UPON RENTAL DELIVERY.
DIAL DOWN ACCORDINGLY. is not available
• Full torque rated

Torque Wrench Model DIMENSIONS (in) Wt.*
Model No. No. A B C D E (lbs)

W2000 WRP20 3.31 0.62 1.38 1.77 5.83 .88
W4000 WRP40 4.29 0.83 1.85 2.32 7.48 1.76
W8000 WRP80 5.39 1.02 2.24 2.71 8.78 4.41
W150000 WRP150 6.50 1.26 2.71 3.43 10.12 8.60
W350000 WRP350 8.84 1.65 3.57 7.15 14.44 23.35

* Weights indicated are for the accessories only and do not include the wrench

877.446.4352 www.superiortoolrental.com www.midlandtool.com 55

Mobile Bolting Calibration,
Certification & Repair Service

Technician Pneumatic and electric
workstation torque tool tester with
6,000 ft. lbs. capacity

56

Midland Tool & Supply and Superior Tool Rental & Repair We can also provide advice on the best solution and most
offer a complete bolting service for all brands, nationwide: effective tools for your application, enabling:
• Demonstration • Safe and controlled performance
• Setup • Job-site efficiency
• Troubleshooting and assistance
• Repair
• Calibration
• Certification
• Training for safe and efficient use

Manual wrench calibration system. Pressure gauge Hydraulic torque
Transducer capacities calibration with tool transducer
• 0 – 100 (in.) lbs. 10,000 psi capacity system with
• 5 – 100 (ft.) lbs. 35,000 ft. lbs.capacity
• 20 – 1000 (ft.) lbs.

Industries Served We can calibrate, test, repair Service Tech Pricing
and certify all of the following:
• Wind power Generation Mobile Calibration Service Tech
• Manufacturing • Manual torque wrenches Hourly service charge for the van to be on site $100.00
• Power Generation (Not charged when on site for manual wrenches)
• Oil & Gas • Hydraulic torque wrenches Hydraulic Calibrations Cost $225.00
• Refineries Pneumatic Calibrations Cost $150.00
• Petrochemical (Square drives and cassettes) Gauge Calibrations Cost $100.00
• General Fabrication Manual Wrench Cost (All Sizes) $75.00
• Pipeline • Pneumatic & electric torque

wrenches pneumatically

driven

877.446.4352 www.superiortoolrental.com www.midlandtool.com 57

Bolting Accessories

Manual Flange Spreader ( POP-IT®) 14 Ton Flange Spreader

FEATURES FEATURES

• Lightweight and durable • Applies 14 tons of maximum spread force
• Available in 2 models, with a capacity • Stepped arm design. Each step can spread under

of 10,000 lbs and 20,000-30,000 lbs full load and only requires .24" access gap.
• Easy to use. Simply insert the toes • Can be used in tandem with

and turn the rachet handle split-flow manifold.

SPECIFICATIONS #FSH-14

Item # Minimum Maximum SPECIFICATIONS
Spread Spread Capacity Weight
Item # Maximum Tip Clearance Maximum Spread
P95-525 1/16" 5-1/4" 10,000 lbs. 11 lbs. Spreading Force 0.24" 2-5/8"

1/2" 5-1/2" 30,000 lbs. 33 lbs. #FSH-14 14 Ton Stepped Blocks
PHD0535 3" 8-1/2" 20,000 lbs. 33 lbs. Use this pair of
#P95-525 Safety block stepped blocks
to increase wedge
10 Ton Flange Spreader opening up to 3-1/2".

FEATURES #SB-1

• Applies 10 tons of spread force #FSB-1
• Wedge style for guide and

easy gasket replacement
• Adjustable jaw widths

from 4.10" to 8.5"

#FS109 Flange Spreader Set-up

SPECIFICATIONS FEATURES

Item # FlanMgeaxTihmicukmness Stud Size Standard Wedge Cap. • Lightweight hand pump
01.25-1.63" • 6' or 10' hose
#FS109 2 x 3.63" .13-1.13" 10 ton • For use with 14 ton

hydraulic flange
spreader.

NC-Series Hydraulic Nut Cutter SPECIFICATIONS

FEATURES Hexagon Heavy hex Bolt Capacity Oil Weight Replacement
Nut Range nut & bolt Range Capacity Chisel Model Item #
• Ranging from across the flats (ton) (in3) (lbs) Number
1/2" - 2-7/8" nut size (in) 7/8 - 1-1/4 (in) 5 .92 1.8 NCB-1319 NC-1319
1/2 - 3/4 .31-.50
• Available in 5 ton to 90 ton capacity
• Provides fast and easy nut removal during 3/4 - 15/16 1-1/4 - 1-7/16 .50-.63 10 1.22 4.4 NCB-1924 NC-1924

shutdown and turnaround work 15/16 - 1-1/8 1-7/16 - 1-13/16 .63-.88 15 3.66 6.6 NCB-2432 NC-2432
• Can be used with hand or electric pumps
• Unique, angled head allows flush access 1-1/8 - 1-9/16 1-13/16 - 2-3/8 .88-1.13 20 4.88 9.7 NCB-3241 NC-3241
• Single-acting, spring return cylinder
1-9/16 - 2 2-3/8 - 3-1/8 1.31-1.38 35 9.46 18.0 NCB-4150 NC-4150

2 - 2-1/4 3-1/8 - 3-1/2 1.38-1.50 50 14.64 26.0 NCB-5060 NC-5060

2-3/8 - 2-7/8 3-1/2 - 4-1/4 1.50-1.88 90 30.00 75.1 NCB-6075 NC-6075

*No Cutting of stainless steel nuts or bolts, good for all grades of steel below grade 5

NS-Series Hydraulic Nut Splitter SPECIFICATIONS

FEATURES Hexagon Heavy hex Bolt Capacity Oil Weight Replacement
Nut Range nut & bolt Range Capacity Blade Model Item #
• Ranging from 2-3/4" to 5-3/8" (in) (ton) (in3) (lbs) Number
• Available in 103.2 to 192.5 ton capacity (in) across the flats
• Single acting spring return cylinder or double for fast retraction
• Hydraulic nut splitters are specially designed to suit 2-3/4 - 3-1/8 4-1/4 - 4-5/8 1.75-2.00 103.2 23.0 81.4 NSB-70 NS-7080

standard ANSI B16.5 / BS1560 flange 2-3/4 - 3-1/2 4-1/4 - 5-3/8 1.75-2.25 103.2 23.0 82.7 NSB-70 NS-7085

2-3/4 - 3-7/8 4-1/4 - 5-3/4 1.75-2.50 103.2 23.0 84.9 NSB-70 NS-7095

2-3/4 - 4-1/4 4-1/4 - 6-1/2 1.75-2.75 103.2 23.0 87.1 NSB-70 NS-70105

4-1/4 - 4-5/8 6-1/2 - 7-1/8 2.75-3.00 192.5 50.0 151.6 NSB-110 NS-110115

4-1/4 - 5-3/8 6-1/2 - 8-1/4 2.75-3.50 192.5 50.0 158.3 NSB-110 NS-110130

*No Cutting of stainless steel nuts or bolts, good for all grades of steel below grade 5

58

Pneumatic Nutrunners

FEATURES

Whatever your industry, if your operations include loosening or tightening heavy duty bolts, Atlas Copco’s slim, lightweight
RTP pneumatic nutrunner can help increase your productivity.

Atlas Copco 3/4" Nutrunner Atlas Copco 1" Nutrunner Atlas Copco 1-1/2" Nutrunner

RTP1300-HR20 RTP4100-HR25 RTP8100-GIR38

SPECIFICATIONS RTP1300-HR20 RTP4100-HR25 RTP8100-GIR38
3/4" – 1-1/16" 1-3/16" – 1-3/4" 1-1/4" – 2"
Item # 1-1/2"
Bolt Size 3/4" 1" 1600 ft lb
Square Drive 236 ft lb 738 ft lb 6000 ft lb
Min Torque at 22 psi 1000 ft lb 3097 ft lb 10
Max Torque at 91 psi 30 lb
Free Speed r/min 20 10 17"
Weight 8.2 lb 19.2 lb 105 cfm
Length 9.7" 1/2"
Air Cons. at Free Speed 48.7 cfm 14" 1/2"
Recommended Hose Size 1/2" 65.5 cfm
Air Inlet Thread 3/8"
1/2"
3/8"

PRESSURE/TORQUE CONVERSION
Always set pressure with tool and/or pump RUNNING and away from job.

Pump Pres. (PSI) RTP1300-HR20 RTP4100-HR25 RTP8100-GIR38

Torque (Ft/Lbs.) Torque (Ft/Lbs.) Torque (Ft/Lbs.)

22 238 789 1900
25 270 885 2120
28 302 981 2350
31 334 1080 2560
33 367 1190 2770
36 399 1290 2970
39 431 1390 3170
42 464 1500 3360
45 496 1600 3550
48 529 1700 3730
51 562 1810 3920
54 594 1920 4090
57 626 2020 4270
60 659 2120 4440
62 690 2230 4610
65 721 2320 4770
68 752 2420 4940
71 782 2520 5100
74 811 2610 5260
77 841 2700 5420
80 870 2790 5580
83 900 2880 5730
86 929 2950 5890
89 959 3030 6040
91 988 3110 6200

877.446.4352 www.superiortoolrental.com www.midlandtool.com 59

Pneumatic Nutrunners

RAD 25GX 1" Drive RAD 34GX 1" Drive RAD 85GX - 1-1/2" Drive

12377 12356 12383

RAD 110DX - 1-1/2" SPECIFICATIONS
110DX
Item # 12377 12356 12383 110DX
Model RAD 25GX RAD 34GX RAD 85GX RAD SINGLE SPEED
Square Drive
1" 1" 1-1/2" 1-1/2"
1000 ft.lb. 3000 ft.lb. 4000 ft.lb.
Min Torque at 22 psi 500 ft.lb. 3400 ft.lb. 8500 ft.lb. 11000 ft.lb.

Max Torque at 91 psi 2500 ft.lb. 12 4.5 3
20.0 lb. 38.5 lb. 42.0 lb.
Free Speed r/min 9 12.5" 14.35" 13.9"
85 db 85 db 85 db
Weight 13.5 lb.
1/2" 1/2" 1/2"
Length 9.7" 3/8" 1/2" 1/2"

Noise Level 85 db

Rec. Hose Size 1/2"

Air Inlet Thread 3/8"

DIMENSIONS (in.)

Item # A B C D
25GX 9.7" 3.1" 3.3" 9.5"
34GX 12.5" 3.4" 3.78" 10.8"
85GX 14.35" 4.5" 4.5" 10.8"
110DX 13.9" 5.0" 5.0" 11.07"

PRESSURE/TORQUE CONVERSION

Always set pressure with tool and/or pump RUNNING and away from job.

RAD 25GX RAD 34GX RAD 85GX RAD 110DX
Pump Pump
Pump Pres. PSI Torque (Ft/Lbs.) Pump Pres. PSI Torque (Ft/Lbs.) Pump Pres. PSI Torque (Ft/Lbs.) Pres. PSI Torque (Ft/Lbs.) Pres. PSI Torque (Ft/Lbs.)

15 500 23 1000 28 3013 31 4000 70 9000
18 600 26 1100 26 3205
21 700 28 1200 35 3672 32 4200 72 9200
24 800 30 1300 40 4206
28 900 33 1400 45 4656 34 4400 75 9400
31 1000 36 1500 50 5157
34 1100 38 1600 55 5627 35 4600 77 9600
37 1200 41 1700 60 6022
40 1300 44 1800 65 6433 37 4800 79 9800
44 1400 46 1900 70 6989
47 1500 49 2000 75 7331 38 5000 81 10000
50 1600 52 2100 80 7747
54 1700 55 2200 85 8151 40 5200 83 10200
57 1800 58 2300 90 8489
60 1900 61 2400 41 5400 85 10400
64 2000 64 2500
68 2100 67 2600 42 5600 87 10600
73 2200 69 2700
77 2300 73 2800 44 5800 89 10800
81 2400 76 2900
85 2500 80 3000 45 6000 91 11000
83 3100
87 3200 47 6200
90 3300
94 3400 48 6400

50 6600

52 6800

53 7000

55 7200

57 7400

58 7600

60 7800

62 8000

63 8200

65 8400

67 8600

69 8800

60

Tension Calibrator

Calibore™ Bolt Tension Calibrator

COMPATIBLE WITH

Impact Wrenches, Manual Torque Wrenches, Nut-Runners, Pneumatic
Torque Wrenches, Hydraulic Bolt Tensioners, Hydraulic Torque Wrenches, Torque
Multipliers, Missing Link™ products, DTI Squirters, and TC break-off bolts.

FEATURES

• “Snap–in” front plate and hex bushing
• Built in adjustable reaction bar
• Gauge reads in both pounds and kilo Newton’s
• Solid, Heavy-duty gauge protector
• Solid milled clamp that secures at two points for beam mounting
• Drilled holes provided for base / table mounting
• Label identifying recommended minimum bolt tension
• Fitted, wheeled carrying case
• Light weight 17.5 lbs. compared to competitions 45 lbs.
• Available in 350 K and 1,000 K

CBT -100

SPECIFICATIONS

REQUIRED MINIMUM BOLT LENGTH BOLT DIAMETER
CBT 100 5/8"
1-5/8" L 3/4"
1-3/4" L 7/8"
1-7/8" L 1"
2" L 1-1/8"
3-1/8" L 1-1/4"
3-1/4" L

CBT-100 DESCRIPTION

CBT-100-PS-062-(H) (S) BASIC UNIT for bolts ranging in size from 1/2" to 1-1/4"
CBT-100-PS-075-(H) (S)
CBT-100-PS-087-(H) (S) STANDARD HEX SIZE BOLT DIAMETER
CBT-100-PS-100-(H) (S)
CBT-100-PS-112-(H) (S) 15/16" 5/8" Plate and Hex Bushing
CBT-100-PS-025-(H) (S) 1-1/8" 3/4" Plate and Hex Bushing
1-5/16" 7/8" Plate and Hex Bushing
1-1/2" 1" Plate and Hex Bushing
1-11/16" 1-1/8" Plate and Hex Bushing
1-7/8" 1-1/4" Plate and Hex Bushing

877.446.4352 www.superiortoolrental.com www.midlandtool.com 61

Torque Tester

Hydraulic Torque Wrench Testing NOT FOR RENT

FEATURES

• Superior Tool can provide a certificate of calibration for all torque wrench rentals, and for your company owned equipment.
• Superior can test 2,500 to 25,000 ft lbs of torque
• A certificate of calibration will be supplied for the tool tested within a tolerance of 4% clockwise and 6% counterclockwise

1" Drive Torque Wrench 1-1/2" Drive Torque Wrench 2-1/2" Drive Torque Wrench W8000 Torque Wrench

PURCHASE or RENT

Back Up Tool

FEATURES

The Backing Tool is designed for torqueing, tightening, and
loosening of flange bolted connections. While a very superior
tool designed for enhanced safety and efficiency, The Backing
Tool is not recommended for use in any abusive action that
veers from reasonable safety practices, such as intentional stud
shearing usually far exceeding torque safety factors resulting in
possible damage of components involved and possible injury.
Responsible use of The Backing Tool allows the craftsman
valuable assistance providing a safer and more productive day.

BACKING TOOL FASTENING PROCEDURE Item # Size Part No. Size

1 Before beginning the fastening procedure, make sure your Q431460 7/8" Q431474 2-9/16"
work area is safe, and all applicable personal protective Q431461 1-1/16" Q431479 2-15/16"
equipment (PPE) is satisfactory and worn. Q431462 1-1/4" Q431471
Q431463 1-7/16" Q431482 2-3/4"
2 Inspect The Backing Tool, tether, and ball detente for any Q431464 1-5/8" Q431484 3-1/8"
possible defects. Insure Muskegon Tools is imprinted on this Q431465 1-13/16" Q431485 3-1/2"
device, which will insure the tool meets required specifications. Q431466 Q431491 3-7/8"
Q431467 2" Q431493 4-1/4"
Q431470 2-3/16" Q431494 4-5/8"
2-3/8" 5-3/8"

3 Push The Backing Tool over the nut or bolt head intended 6 Upon completion of tightening, The Backing Tool may be
for the back up device. Make sure full contact is made, and removed by hand. If necessary, a hammer can be used
the right angle lip on The Backing Tool is suitably contacted
with the outer diameter on the flange. against the strike plate of the tool for removal. Use the
smallest hammer necessary. Make sure your tether is secure
before removal begins.
Attach a suitable tether to the ring on The Backing Tool
4 and the other end to a stationary object. As in any 7 The Backing Tool is designed to enhance safety and effec-

fastening operation, make sure the area below is tiveness in the workplace. Proper care of The Backing Tool
barricaded and clear. should be maintained.

5 The fastening operation is now ready. For hands free 8 During the course of operating The Backing Tool, if more or
backup, keep hands free of The Backing Tool, and apply less tension on the “ball detente” is required, remove the cap
necessary torque to the opposing side of the fastener.
protecting the threads with an allen wrench and adjust the
depth with a screw driver.

62

Manual Torque Wrenches Manual Bolting

#4478
#6448
#10005LDFN
#8447
#8448

#8449

SPECIFICATIONS

Item # Torque Range Drive (in.) Head Style No. of Ext. Handles Length (in.) Weight (lbs.)
#4478 0-250 ft. lbs. 1/2 Ratchet 0 24 3.15
#6448 100-600 ft. lbs. 3/4 Ratchet 0 42 17
#10005LDFN 0-1000 ft. lbs. 1 Plain 1 74 30
#8447 1 Ratchet 1 70 25.0
#8448 200-1000 ft. lbs. 1 Plain 1 69 24.5
#8449 200-1000 ft. lbs. 1 Plain 2 48.75
300-2000 ft. lbs. 108-1/2

Torque Multipliers

#9S391 #9S292 #9S392B #9S393A

SPECIFICATIONS
Output Capacity 1200 ft. lbs. Output Capacity 2,200 ft. lbs.
Input Capacity 200 ft. lbs. Output Capacity 2.000 ft. lbs. Input Capacity 162 ft. lbs. Output Capacity 3,200 ft. lbs.
Input Capacity 500 ft. lbs. Input Capacity 173 ft. lbs.
Input Drive 1/2" sq. female Input Drive 3/4" sq. female Input Drive 1/2" sq. female Input Drive 1/2" sq. female
Output Drive 3/4" sq. male Output Drive 1" sq. male Output Drive 1” sq. male Output Drive 1" sq. male
Torque Ratio 6:1 Torque Ratio 3.5:1 Torque Ratio 13.6:1 Torque Ratio 18.5:1
A Length 19.6" Gear Ratio 4.267:1 Gear Ratio 15.0:1 Gear Ratio 20.25:1
B Head Dia. 3.94" A Length 19-1/2" A Length 19-5/8" A Length 19-5/8"
C Height 4" B Head Dia. 4-1/2" B Head Dia. 4-1/16" B Head Dia. 4-1/16"
Wt. lbs. 9.1 lbs. C Height 3-13/16" C Height 6-1/2" C Height 6-1/2"
Size 1200 ft. lbs. Wt. lbs. 13.91 lbs. Wt. lbs. 20.19 lbs. Wt. lbs. 18.3 lbs.
Size 2000 ft. lbs. Size 2,200 ft. lbs. Size 3,200 ft. lbs.

877.446.4352 www.superiortoolrental.com www.midlandtool.com 63

Manual Bolting NOT FOR RENT

Manual Torque Wrench Testing

Certificate of Calibration

Nut / Bolt Size vs. Width Across Flats (in.)

Nut/Bolt 1/2 5/8 3/4 7/8 1 11/8 11/4 13/8 11/2 15/8 13/4 17/8 2 21/4 21/2 3 31/2
Size 7/8 11/16 11/4 17/16 15/8 113/16 2 23/16 13/8 29/16 23/4 215/16 31/8 31/2 37/8 45/8 53/8
Wrench
Size

TORQUE PROCEDURE TORQUE SEQUENCE

When torquing, it is common to tighten only one
bolt at a time. This can result in Point Loading and
Load Scatter. To avoid this, torque is applied in
stages following a prescribed pattern:

Step 1 Spanner tight, ensuring that 2 - 3 Step 4 Increase the torque to full torque, following
threads extend above nut. the pattern shown above.

Step 2 Tighten each bolt to one-third of the final Step 5 Perform one final pass on each bolt, working
required torque, following the pattern as clockwise from bolt 1, at the full final torque.
shown above.

Step 3 Increase the torque to two-thirds, follow-
ing the pattern shown above.

64

Hydraulic Pumps & Cylinders

P-Series Ultima Steel Hand Pumps PU-Series Electric Pumps
Hand pumps, including the P-39 and P-80 Standard electric and battery operated pumps.

P-80

P-39

PUJ-1200B PUD-1301B

SPECIFICATIONS

SPECIFICATIONS It e m # CUa(spgOaaaib lcl )liety CUy wlsinietdhd e r Ps tr1aesgst es u(presis)R2 tnaagdtieng RsOt1auasttgetpe u(itn3Fs/2tlmoangwdine) TVyaplvee Weight

Ite m # CUaspaa cbiltey O(inil3 ) PTuympep 1stPsretasgseu re 2nR datsitnagg e Weight Dump
PUD-1301B 1.00 S ingle- 200 10,000 200 20 & Hold 35 lbs.
P-39 47 Single N/C 10,000 psi 13.6 lbs.
PUJ-1200B .50 a cting 200 10,000 200 20 3-way, 24 lbs.
P-80 134 Two-Speed 500 10,000 psi 23.6 lbs. 2-pos.

877.446.4352 www.superiortoolrental.com www.midlandtool.com 65

Hydraulic Pumps

All-in-One Electric Hydraulic Pump Carts

FEATURES

• 4 manifold system with built in gauge
• Can be used for either single or double acting hydraulic cylinders
• Allows for easy mobility on the job-site

SPECIFICATIONS
Output Flow Rate at
Usable Oil Capacity
10,000 psi: 60 in3/min Used with Cylinder Valve Function (gal) Weight w/Cart
Advance Hold Retract (lbs)
Item # Single Double 2.5
Acting Acting 5.0 134
161
ZE4310SB •- •• •
•• •
ZE4320SB •-

ZU-Series Electric Pumps ZE-Series Electric Pumps

FEATURES FEATURES

Mid-size hydraulic pumps for single and double acting cylinders. Larger electric reservoir pump w/filter and gauges for
single and double acting hydraulic cylinders.

SPECIFICATIONS SPECIFICATIONS

Item # Used with Valve Pump Usable Weight Output Flow Used with Valve Usable Weight
Cylinder Function Control Oil with Rate at Cylinder Function Oil
115 VAC3) Capacity Oil 10,000 psi: Capacity
1 Phase Single Double Advance Hold Retract (gal) (lbs) 60 in3/min aScintignlge Daocutinbgle Advance Hold Retract
acting acting Item # (gal) (lbs)

ZU4308PB • - • • • Remote (Man.) 2.0 71
ZU4408PB -
ZU4420PB - • • • • Remote (Man.) 2.0 71 ZE4310SB • - • •• 2.5 134
• • • Remote (Man.) 5.0 110 ZE4320SB • - • •• 5.0 161
•

66

Hydraulics Pumps

877.446.4352 www.superiortoolrental.com www.midlandtool.com 67

Cylinders Single-Acting Lock Nut Cylinders

Single-Acting Hydraulic Cylinders

RC-Series CLL-Series

SPECIFICATIONS SPECIFICATIONS
Cylinder Stroke
Capacity Collap. Ext. Outside Weight Cylinder Stroke Collap. Ext. Outside Lock Weight
Height Height Diam. Capacity Height Height Diam. Nut
Item # Item #
A BD RC-251 B D Height
(in) (in) (in) (lbs) RC-252 (in)
(ton) (in) RC-254 (ton) (in) (in) (in) (in) lbs.
RC-256 8.43
25 1.00 5.50 6.50 3.38 13 RC-258 50 1.97 6.46 12.36 4.92 1.42 35 CLL-502
2.00 6.50 8.50 3.38 14 RC-2510 3.94 8.43 16.30 4.92 1.42 46 CLL-504
(25.8) 4.00 8.50 12.50 3.38 18 RC-2512 100 5.91 10.39 20.24 4.92 1.42 57 CLL-506
6.25 10.75 17.00 3.38 22 RC-2514 7.87 12.36 24.17 4.92 1.42 68 CLL-508
50 8.25 12.75 21.00 3.38 27 RC-502 150 9.84 14.33 28.11 4.92 1.42 79 CLL-5010
(55.2) 10.25 14.75 25.00 3.38 31 RC-504 11.81 16.30 9.33 4.92 1.42 90 CLL-5012
100 12.25 16.75 29.00 3.38 36 RC-506 200 1.97 7.36 13.27 6.50 1.73 68 CLL-1002
(103.1) 14.25 18.75 33.00 3.38 39 RC-5013 250 3.94 9.33 17.20 6.50 1.73 87 CLL-1004
2.00 6.94 8.94 5.00 33 RC-1006 300 5.91 11.30 21.14 6.50 1.73 106 CLL-1006
4.00 8.94 12.94 5.00 42 RC-10010 400 7.87 13.27 25.08 6.50 1.73 125 CLL-1008
6.25 11.13 17.38 5.00 51 500 9.84 15.24 29.02 6.50 1.73 143 CLL-10010
13.25 18.13 31.38 5.00 83 600 11.81 17.20 10.20 6.50 1.73 162 CLL-10012
6.63 14.06 20.69 7.00 130 800 1.97 8.23 14.13 8.07 1.73 117 CLL-1502
10.25 17.69 27.94 7.00 160 1000 3.94 10.20 18.07 8.07 1.73 146 CLL-1504
5.91 12.17 22.01 8.07 1.73 174 CLL-1506
Low Height Cylinders 7.87 14.13 25.94 8.07 1.73 203 CLL-1508
9.84 16.10 29.88 8.07 1.73 231 CLL-15010
RSM/RCS-Series RCS-Series RSM-Series 11.81 18.07 11.54 8.07 1.73 260 CLL-15012
1.97 9.57 19.41 9.25 1.97 183 CLL-2002
SPECIFICATIONS 5.91 13.50 31.22 9.25 1.97 260 CLL-2006
11.81 19.41 11.17 9.25 1.97 376 CLL-20012
Cylinder Stroke Collap. Ext. Outside Weight Item # 1.97 9.80 19.65 10.83 2.20 256 CLL-2502
Capacity Height Height Diam. (lbs) 5.91 13.74 31.46 10.83 2.20 359 CLL-2506
AB 11.81 19.65 13.58 10.83 2.20 515 CLL-25012
(ton) D 1.97 11.61 21.46 12.20 2.36 382 CLL-3002
(maxi) (in) (in) (in) (in) 5.91 15.55 33.27 12.20 2.36 514 CLL-3006
20 (22.4) 11.81 21.46 15.16 12.20 2.36 712 CLL-30012
30 (32.4) .44 2.03 2.47 4.00 x 3.00 6.8 RSM-200 1.97 13.19 23.03 13.78 2.76 553 CLL-4002
50 (48.1) .50 2.31 2.81 4.63 x 3.75 10 RSM-300 5.91 17.13 34.84 13.78 2.76 721 CLL-4006
75 (79.5) .63 2.63 3.25 5.50 x 4.50 15 RSM-500 11.81 23.03 16.73 13.78 2.76 972 CLL-40012
100 (98.1) .63 3.13 3.75 6.50 x 5.50 25 RSM-750 1.97 14.76 24.61 15.75 3.15 809 CLL-5002
150 (153.4) .63 3.38 4.00 7.00 x 6.00 32 RSM-1000 5.91 18.70 36.42 15.75 3.15 1029 CLL-5006
.63 3.94 4.56 8.50 x 7.50 58 RSM-1500 11.81 24.61 17.52 15.75 3.15 1360 CLL-50012
20 (22.1) 1.97 15.55 25.39 16.93 3.35 985 CLL-6002
30 (32.4) 1.75 3.88 5.63 3.63 11 RCS-201 5.91 19.49 37.20 16.93 3.35 1241 CLL-6006
50 (48.1) 11.81 25.39 19.88 16.93 3.35 1625 CLL-60012
100 (98.1) 2.44 3.63 7.06 1.97 17.91 27.76 19.88 3.94 1565 CLL-8002
2.38 4.81 7.19 5.91 21.85 39.57 19.88 3.94 1918 CLL-8006
2.25 5.56 7.81 11.81 27.76 21.46 19.88 3.94 2446 CLL-80012
1.97 19.49 29.33 22.05 4.33 2094 CLL-10002
5.91 23.43 41.14 22.05 4.33 2517 CLL-10006
11.81 29.33 22.05 4.33 3151 CLL-100012

4.00 15 RCS-302
4.88 24 RCS-502
6.50 50 RCS-1002

68

Double-Acting Cylinders Cylinders

Single-Acting Aluminum Cylinders

RR-Series RR-506 to RR-50048 models RAC-Series

SPECIFICATIONS SPECIFICATIONS
Cylinder Stroke
Capacity Ext. Outside Collap. Cylinder Stroke Collap. Ext. Outside Weight
Height Diam. Height Capacity Height Height Diam.
Item # (ton) A Item #
BD (maximum) (in) (in) BD RAC-202
(ton) (in) (in) (in) (in) (in) (in) (lbs) RAC-204
6.13 13.06 8.82 3.35 7.9 RAC-206
50 13.13 19.19 5.00 20.06 RR-506 20 1.97 6.85 12.76 3.35 9.0 RAC-502
75 20.13 33.19 5.00 28.88 RR-5013 (24.1) 3.94 8.82 16.69 3.35 10.1 RAC-504
100 6.13 49.00 5.00 13.69 RR-5020 5.91 10.79 9.29 5.12 18.7 RAC-506
150 13.13 19.81 5.75 20.69 RR-756 50 1.97 7.32 13.23 5.12 21.6 RAC-1004
6.63 33.81 5.75 14.06 RR-7513 (54.9) 3.94 9.29 17.17 5.12 24.5 RAC-1006
200 13.13 20.69 7.00 20.63 RR-1006 100 5.91 11.26 14.61 7.09 43.2 RAC-1008
18.13 33.75 7.00 27.06 RR-10013 (110.9) 3.94 10.67 18.54 7.09 48.3
300 2.25 45.19 7.00 7.72 RR-10018 5.91 12.64 22.48 7.09 53.4
6.13 9.44 8.00 15.19 RR-1502 7.87 14.61
400 13.13 21.31 8.00 22.20 RR-1506
32.13 35.31 8.00 43.94 RR-15013 Aluminum Lock Nut Cylinders
500 6.00 76.06 8.00 16.94 RR-15032
13.00 22.94 9.75 23.94 RR-2006 RACL-Series
18.00 36.94 9.75 30.13 RR-20013
24.00 48.13 9.75 36.13 RR-20018 SPECIFICATIONS
36.00 60.13 9.75 48.13 RR-20024
48.00 84.13 9.75 60.13 RR-20036 Cylinder Stroke Collap. Ext. Outside Weight Item #
6.00 108.13 9.75 19.13 RR-20048 Capacity Height Height Diam. RACL-302
12.00 25.13 12.25 25.13 RR-3006 (lbs) RACL-304
18.00 37.13 12.25 31.13 RR-30012 (ton) A B D 11.9 RACL-306
24.00 49.13 12.25 37.13 RR-30018 (maximum) (in) (in) (in) (in) 13.4 RACL-502
36.00 61.13 12.25 49.13 RR-30024 9.10 11.07 3.94 14.9 RACL-504
48.00 85.13 12.25 61.13 RR-30036 30 1.97 11.07 15.01 3.94 20.5 RACL-506
6.00 109.13 12.25 21.19 RR-30048 (34.2) 3.94 13.04 18.95 3.94 23.4 RACL-1002
12.00 27.19 14.13 27.19 RR-4006 5.91 9.29 11.26 5.12 26.2 RACL-1004
18.00 39.19 14.13 33.19 RR-40012 50 1.97 11.26 15.20 5.12 48.2 RACL-1006
24.00 51.19 14.13 39.19 RR-40018 (54.9) 3.94 13.23 19.13 5.12 53.3 RACL-1502
36.00 63.19 14.13 51.19 RR-40024 100 5.91 11.65 13.62 7.09 58.4 RACL-1504
48.00 87.19 14.13 63.19 RR-40036 (110.9) 1.97 13.62 17.56 7.09 71.0 RACL-1506
6.00 119.19 14.13 22.75 RR-40048 150 3.94 15.59 21.50 7.09 79.8
12.00 28.75 15.63 28.75 RR-5006 (175.9) 5.91 12.72 14.69 9.06 88.6
18.00 40.75 15.63 34.75 RR-50012 1.97 14.69 18.62 9.06
24.00 52.75 15.63 40.75 RR-50018 3.94 16.65 22.56 9.06
36.00 64.75 15.63 52.75 RR-50024 5.91
48.00 88.75 15.63 64.75 RR-50036
112.75 15.63 RR-50048

877.446.4352 www.superiortoolrental.com www.midlandtool.com 69

Cylinders CULP-Series with Ultra Flat Cylinder with Stop Ring

Pancake Lock Nut Cylinders Single-Acting

CULP-Series

CPL-Series Cylinder Stroke Collapsed Extended Outside Oil Wt. Item #
Capacity Height Height Dia. Cap. CULP10*
SPECIFICATIONS (in.) (lbs) CULP20*
@ 0.24 (in.) (in.) (in.) (in.) 2 CULP30*
Cylinder Stroke Collap. Ext. Outside Weight 10,150 psi 0.24 1.08 1.32 2.83 0.51 4 CULP50*
Capacity Height Height Diam. ton (max) 0.24 1.26 1.50 3.54 1.04 6
Item # 0.24 1.38 1.61 4.31 1.62 10
10 (10.9) 1.75 1.99 5.12 2.88
20 (22.2)
30 (34.8)
50 (61.8)

(ton) A B D * Coupler AR630 including dustcap: Use HB7206 hose including AH630 coupler
[max] (in) (in) (in) (in) (lbs) to connect to your pump.

60 1.97 4.92 6.89 5.51 33 CLP-602 High Tonage Ultra Flat Cylinder with Tilting Plunger
[67.1]

100 1.97 5.39 7.36 6.89 57 CLP-1002
[113.7]

160 1.77 5.83 7.60 8.66 97 CLP-1602
[179.2]

200 1.77 6.10 7.87 9.65 125 CLP-2002
[221.3]

250 1.77 6.26 8.03 10.83 163 CLP-2502
[284.2]

400 1.77 7.01 8.78 13.78 295 CLP-4002
[433.6]
CUSP-Series
500 1.77 7.56 9.33 15.75 416 CLP-5002
[566.2] SPECIFICATIONS

Aluminum Cylinders Double-Acting Cylinder Tilted Straight Tilting Collapsed Extended Outside Oil Wt.
Capacity Stroke Stroke +/- Height Height Dia. Cap.
@ Item #

10,150 psi

ton (max) (in.) (in.) (deg.) (in.) (in.) (lbs) (in3) (lbs)

RAR-Series 10 (10.9) 0.24 0.26 2 1.40 1.66 2.83 0.57 2.6 CUSP101)
20 (22.2) 0.24 0.28 2 1.59 1.87 3.54 1.21 4.2 CUSP201)
SPECIFICATIONS 30 (34.8) 0.24 0.29 2 1.67 1.96 4.13 1.97 6.0 CUSP301)
50 (61.8) 0.39 0.52 4 2.24 2.77 5.12 6.38 12.3 CUSP501)
Cylinder Stroke Collap. Ext. Outside Weight 75 (89.0) 0.39 0.55 4 2.38 2.93 5.91 9.66 17.6 CUSP751)
100 (121.1) 0.39 0.58 4 2.50 3.08 6.69 13.81 23.8 CUSP1002)
150 (178.6) 0.39 0.58 3 2.56 3.12 7.87 19.81 33.7 CUSP1502)
200 (235.0) 0.39 0.59 3 2.72 3.30 9.02 27.15 47.4 CUSP2002)
250 (285.6) 0.39 0.61 3 2.85 3.46 9.92 34.34 60.2 CUSP2502)
300 (355.9) 0.39 0.56 2 2.85 3.41 11.10 38.93 75.08 CUSP3002)
400 (450.5) 0.39 0.57 2 3.05 3.63 12.44 51.01 101.09 CUSP4002)
500 (450.5) 0.39 0.60 2 3.25 3.85 14.02 67.77 138.2 CUSP5002)
600 (6729) 0.39 0.61 2 3.44 4.06 15.20 81.42 172.8 CUSP6002)
750 (846.0) 0.39 0.64 2 3.68 4.32 17.01 106.95 231.9 CUSP7502)
1000 (1142.6) 0.39 0.69 2 4.06 4.74 19.76 154.20 346.1 CUSP10006)
Capacity Height Height Diam. Item #
AB D 1) Coupler AR630 including dustcap: Use HB7206 hose including AH630 coupler to connect to your pump.
2) Coupler CR400 including dustcap: Use HC-Series hose including CH604 coupler to connect to your pump.
(ton) (in) (in) (in) (in) (lbs)

1.97 7.91 9.88 5.71 24.5 RAR-502

50 3.94 9.88 13.82 5.71 28.0 RAR-504

5.91 11.85 17.76 5.71 31.5 RAR-506

3.94 11.85 15.79 7.28 42.6 RAR-1004

100 5.91 13.82 19.72 7.28 48.9 RAR-1006

7.87 15.79 23.66 7.28 55.3 RAR-1008

150 5.91 13.71 19.66 9.06 73.2 RAR-1506

70

Single-Acting High Tonage Cylinders Cylinders

Double-Acting High Tonage Cylinders

CLRG-50 to 150 CLRG-200 to 1000

CLSG-Series CLRG-Series

SPECIFICATIONS SPECIFICATIONS

Cylinder Stroke Collap. Ext. Outside Weight Item # Cylinder Stroke Collap. Ext. Outside Weight Item #
Capacity Height Height Diam. Capacity Height Height Diam.
AB D CLSG AB D CLRG
(ton) (ton) (in) (in) (in) (in) (lbs) Double-Acting
[max] (in) (in) (in) (in) (lbs) Single-Acting [max]

1.97 6.38 8.35 5.12 37 CLSG-502 1.97 6.38 8.35 5.12 37 CLRG-502
8.35 12.28 5.12 44 CLSG-504 8.35 12.28 5.12 44 CLRG-504
50 3.94 10.31 16.22 5.12 51 CLSG-506 50 3.94 10.31 16.22 5.12 51 CLRG-506
[59.1] 5.91 12.28 20.16 5.12 60 CLSG-508 [59.1] 5.91 12.28 20.16 5.12 60 CLRG-508
7.87 14.25 24.09 5.12 68 CLSG-5010 7.87 14.25 24.09 5.12 68 CLRG-5010
16.22 28.03 5.12 75 CLSG-5012 16.22 28.03 5.12 75 CLRG-5012
9.84 7.16 9.13 6.50 42 CLSG-1002 9.84 7.16 9.13 6.50 42 CLRG-1002
9.13 13.06 6.50 64 CLSG-1004 9.13 13.06 6.50 64 CLRG-1004
11.81 11.09 17.00 6.50 88 CLSG-1006 11.81 11.09 17.00 6.50 88 CLRG-1006
13.06 20.94 6.50 110 CLSG-1008 13.06 20.94 6.50 110 CLRG-1008
1.97 15.03 24.87 6.50 134 CLSG-10010 1.97 15.03 24.87 6.50 134 CLRG-10010
17.00 28.81 6.50 157 CLSG-10012 17.00 28.81 6.50 157 CLRG-10012
100 3.94 7.72 9.69 8.07 86 CLSG-1502 100 3.94 7.72 9.69 8.07 86 CLRG-1502
5.91 9.69 13.62 8.07 115 CLSG-1504 5.91 9.69 13.62 8.07 115 CLRG-1504
[102.9] 7.87 11.65 17.56 8.07 143 CLSG-1506 [102.9] 7.87 11.65 17.56 8.07 143 CLRG-1506
9.84 13.62 21.50 8.07 172 CLSG-1508 9.84 13.62 21.50 8.07 172 CLRG-1508
15.59 25.43 8.07 203 CLSG-15010 15.59 25.43 8.07 203 CLRG-15010
11.81 17.56 29.37 8.07 231 CLSG-15012 11.81 17.56 29.37 8.07 231 CLRG-15012
8.50 10.47 9.25 121 CLSG-2002 8.50 10.47 9.25 121 CLRG-2002
1.97 12.44 18.35 9.25 201 CLSG-2006 1.97 12.44 18.35 9.25 201 CLRG-2006
18.35 30.16 9.25 322 CLSG-20012 18.35 30.16 9.25 322 CLRG-20012
3.94 9.25 11.22 10.83 196 CLSG-2502 3.94 9.25 11.22 10.83 196 CLRG-2502
13.19 19.09 10.83 300 CLSG-2506 13.19 19.09 10.83 300 CLRG-2506
150 5.91 19.09 30.91 10.83 456 CLSG-25012 150 5.91 19.09 30.91 10.83 456 CLRG-25012
[153.9] 7.87 12.28 14.25 12.20 406 CLSG-3002 [153.9] 7.87 12.28 14.25 12.20 406 CLRG-3002
9.84 16.22 22.13 12.20 511 CLSG-3006 9.84 16.22 22.13 12.20 511 CLRG-3006
22.13 33.94 12.20 668 CLSG-30012 22.13 33.94 12.20 668 CLRG-30012
11.81 14.74 16.71 13.78 595 CLSG-4002 11.81 14.74 16.71 13.78 595 CLRG-4002
18.86 24.59 13.78 728 CLSG-4006 18.86 24.59 13.78 728 CLRG-4006
200 1.97 24.59 36.40 13.78 928 CLSG-40012 200 1.97 24.59 36.40 13.78 928 CLRG-40012
[206.1] 5.91 16.50 18.46 15.75 884 CLSG-5002 [206.1] 5.91 16.50 18.46 15.75 884 CLRG-5002
11.81 20.43 26.34 15.75 1058 CLSG-5006 11.81 20.43 26.34 15.75 1058 CLRG-5006
26.34 38.15 15.75 1321 CLSG-50012 26.34 38.15 15.75 1321 CLRG-50012
250 1.97 16.89 18.86 16.93 1045 CLSG-6002 250 1.97 16.89 18.86 16.93 1045 CLRG-6002
[284.0] 5.91 20.83 26.73 16.93 1246 CLSG-6006 [284.0] 5.91 20.83 26.73 16.93 1246 CLRG-6006
11.81 26.73 38.54 16.93 1545 CLSG-60012 11.81 26.73 38.54 16.93 1545 CLRG-60012
18.66 20.63 19.88 1634 CLSG-8002 18.66 20.63 19.88 1634 CLRG-8002
300 1.97 22.60 28.50 19.88 1941 CLSG-8006 300 1.97 22.60 28.50 19.88 1941 CLRG-8006
[353.6] 5.91 28.50 40.31 19.88 2332 CLSG-80012 [353.6] 5.91 28.50 40.31 19.88 2332 CLRG-80012
11.81 22.20 24.17 22.05 2341 CLSG-10002 11.81 22.20 24.17 22.05 2341 CLRG-10002
26.14 32.05 22.05 2674 CLSG-10006 26.14 32.05 22.05 2674 CLRG-10006
400 1.97 32.05 43.86 22.05 3172 CLSG-100012 400 1.97 32.05 43.86 22.05 3172 CLRG-100012
[433.9] 5.91 [433.9] 5.91
11.81 11.81

500 1.97 500 1.97
[566.3] 5.91 [566.3] 5.91
11.81 11.81

600 1.97 600 1.97
[662.9] 5.91 [662.9] 5.91
11.81 11.81

800 1.97 800 1.97
[911.6] 5.91 [911.6] 5.91
11.81 11.81

1000 1.97 1000 1.97
[1136] 5.91 [1136] 5.91
11.81 11.81

877.446.4352 www.superiortoolrental.com www.midlandtool.com 71

Cylinders

HCG, HCR & HCL Series High Tonage Cylinders

SPECIFICATIONS HCG-Series HCR-Series HCL-Series
Item # Collapsed Item # Collapsed
Cyliner Stroke Max Single-Acting Height Item # Collapsed Single-Acting Height
Capacity Cylinder Double-Acting Height wIth Lock Nut
Capacity
at 10,150 psi

(Ton) (in.) (Ton) (in.) (in.) (in.)

50 1.97 62 HCG-502 7.20 HCR-502 7.20 HCL-502 6.46
100 3.94 113 HCG-504 9.17 HCR-504 9.17 HCL-504 8.43
150 5.91 168 HCG-506 11.14 HCR-506 11.14 HCL-506 10.39
200 7.87 223 HCG-508 13.62 HCR-508 13.62 HCL-508 12.36
250 9.84 286 HCG-5010 15.59 HCR-5010 15.59 HCL-5010 14.33
300 11.87 341 HCG-5012 17.56 HCR-5012 17.56 HCL-5012 16.30
1.97 HCG-1002 7.95 HCR-1002 7.95 HCL-1002 7.36
3.94 HCG-1004 9.92 HCR-1004 9.92 HCL-1004 9.33
5.91 HCG-1006 11.89 HCR-1006 11.89 HCL-1006 11.30
7.87 HCG-1008 14.92 HCR-1008 14.92 HCL-1008 13.27
9.84 HCG-10010 16.89 HCR-10010 16.89 HCL-10010 15.24
11.87 HCG-10012 18.86 HCR-10012 18.86 HCL-10012 17.20
1.97 HCG-1502 8.66 HCR-1502 8.66 HCL-1502 8.23
3.94 HCG-1504 10.63 HCR-1504 10.63 HCL-1504 10.20
5.91 HCG-1506 12.60 HCR-1506 12.60 HCL-1506 12.17
7.87 HCG-1508 15.63 HCR-1508 15.63 HCL-1508 14.13
9.84 HCG-15010 17.60 HCR-15010 17.60 HCL-15010 16.10
11.87 HCG-15012 19.57 HCR-15012 19.57 HCL-15012 18.07
1.97 HCG-2002 9.09 HCR-2002 9.09 HCL-2002 9.37
3.94 HCG-2004 11.06 HCR-2004 11.06 HCL-2004 11.34
5.91 HCG-2006 13.03 HCR-2006 13.03 HCL-2006 13.31
7.87 HCG-2008 16.06 HCR-2008 16.06 HCL-2008 15.28
9.84 HCG-20010 18.03 HCR-20010 18.03 HCL-20010 17.24
11.87 HCG-20012 20.00 HCR-20012 20.00 HCL-20012 19.21
1.97 HCG-2502 9.49 HCR-2502 9.49 HCL-2502 9.80
3.94 HCG-2504 11.46 HCR-2504 11.46 HCL-2504 11.71
5.91 HCG-2506 13.43 HCR-2506 13.43 HCL-2506 13.74
7.87 HCG-2508 16.97 HCR-2508 16.97 HCL-2508 15.71
9.84 HCG-25010 18.94 HCR-25010 18.94 HCL-25010 17.68
11.87 HCG-25012 20.91 HCR-25012 20.91 HCL-25012 19.65
1.97 HCG-3002 11.65 HCR-3002 11.65 HCL-3002 10.94
3.94 HCG-3004 13.62 HCR-3004 13.62 HCL-3004 12.91
5.91 HCG-3006 15.59 HCR-3006 15.59 HCL-3006 14.88
7.87 HCG-3008 17.56 HCR-3008 17.56 HCL-3008 16.85
9.84 HCG-30010 19.53 HCR-30010 19.53 HCL-30010 18.82
11.87 HCG-30012 21.50 HCR-30012 21.50 HCL-30012 20.79

72

Cylinders

HCG, HCR & HCL Series High Tonage Cylinders

SPECIFICATIONS HCG-Series HCR-Series HCL-Series
Item # Collapsed
Cyliner Stroke Max Item # Collapsed Item # Collapsed Single-Acting Height
Capacity Cylinder Single-Acting Height Double-Acting Height wIth Lock Nut
Capacity
at 10,150 psi

(Ton) (in.) (Ton) (in.) (in.) (in.)

400 1.97 450 HCG-4002 12.64 HCR-4002 12.64 HCL-4002 12.48
500 3.94 575 HCG-4004 14.61 HCR-4004 14.61 HCL-4004 14.45
600 5.91 637 HCG-4006 16.57 HCR-4006 16.57 HCL-4006 16.42
800 7.87 916 HCG-4008 18.54 HCR-4008 18.54 HCL-4008 18.39
1000 9.84 1196 HCG-40010 20.51 HCR-40010 20.51 HCL-40010 20.35
11.87 HCG-40012 22.48 HCR-40012 22.48 HCL-40012 22.32
1.97 HCG-5002 13.54 HCR-5002 13.54 HCL-5002 14.06
3.94 HCG-5004 15.51 HCR-5004 15.51 HCL-5004 16.02
5.91 HCG-5006 17.48 HCR-5006 17.48 HCL-5006 17.99
7.87 HCG-5008 19.45 HCR-5008 19.45 HCL-5008 19.96
9.84 HCG-50010 21.42 HCR-50010 21.42 HCL-50010 21.93
11.87 HCG-50012 23.39 HCR-50012 23.39 HCL-50012 2390
1.97 HCG-6002 13.86 HCR-6002 13.86 HCL-6002 14.96
3.94 HCG-6004 15.83 HCR-6004 15.83 HCL-6004 16.93
5.91 HCG-6006 17.80 HCR-6006 17.80 HCL-6006 18.90
7.87 HCG-6008 19.76 HCR-6008 19.76 HCL-6008 20.87
9.84 HCG-60010 21.73 HCR-60010 21.73 HCL-60010 22.83
11.87 HCG-60012 23.70 HCR-60012 23.70 HCL-60012 24.80
1.97 HCG-8002 15.91 HCR-8002 15.91 HCL-8002 16.93
3.94 HCG-8004 17.87 HCR-8004 17.87 HCL-8004 18.90
5.91 HCG-8006 19.84 HCR-8006 19.84 HCL-8006 20.87
7.87 HCG-8008 21.81 HCR-8008 21.81 HCL-8008 22.83
9.84 HCG-80010 23.78 HCR-80010 23.78 HCL-80010 24.80
11.87 HCG-80012 25.75 HCR-80012 25.75 HCL-80012 26.77
1.97 HCG-10002 17.40 HCR-10002 17.40 HCL-10002 19.06
3.94 HCG-10004 19.37 HCR-10004 19.37 HCL-10004 21.02
5.91 HCG-10006 21.34 HCR-10006 21.34 HCL-10006 22.99
7.87 HCG-10008 23.31 HCR-10008 23.31 HCL-10008 24.96
9.84 HCG-100010 25.28 HCR-100010 25.28 HCL-100010 26.93
11.87 HCG-100012 27.24 HCR-100012 27.24 HCL-100012 28.90

877.446.4352 www.superiortoolrental.com www.midlandtool.com 73

Cylinders RCH-202 to RCH-1003 models

Single Acting Hollow Plunger Cylinders

RCH-120 to RCH-123 models

RCH-Series

Cylinder Stroke Collap. Ext. Outside Thread Plunger Thread Center Hole Weight
Capacity Height Height Diam. O Length Diameter
(in.) PY (lbs.) Item #
(ton max) (in.) A B D (in.) (in.) 3.2 RCH-120
0.31 (in.) (in.) (in.) 6.2 RCH-121
12 (13.8) 1.63 2.19 2.50 2.75 3/4-16 un .63 .77 6.2 RCH-1211
1.63 4.75 6.38 2.75 - - .77 9.8 RCH-123
20 (23.6) 3.00 4.75 6.38 2.75 .63 .77 17 RCH-202
30 (36.1) 2.00 7.25 10.25 2.75 3/4-16 un - .77 31 RCH-206
60 (63.6) 6.10 6.38 8.38 3.88 - .75 1.06 24 RCH-302
100 (103.1) 2.50 12.05 18.11 3.88 .75 1.06 48 RCH-306
6.13 7.03 9.53 4.50 1-9/16-16 un .88 1.31 62 RCH-603
3.00 13.00 19.13 4.50 1-9/16-16 un .88 1.31 78 RCH-606
6.00 9.75 12.75 6.25 1-13/16-16 un .75 2.12 132 RCH-1003
3.00 12.75 18.75 6.25 1-13/16-16 un .75 2.12
10.00 13.00 8.38 2-3/4-16 un 1.00 3.11
2-3/4-16 un

4-16 un

Double Acting Hollow Plunger Cylinders

RRH-Series

Cylinder Stroke Collap. Ext. Outside Thread Plunger Thread Center Hole Weight Item #
Capacity Height Height Diam. Length Diameter RRH-307
O P Y (lbs.) RRH-3010
(ton) (in.) A B D (in.) (in.) (in.) 48 RRH-603
30 7.00 (in.) (in.) (in.) 1-13/16-16 .88 1.31 60 RRH-606
60 10.13 13.00 20.00 4.50 1-13/16-16 .88 1.31 62 RRH-6010
3.50 17.00 27.13 4.50 2-3/4-16 .75 2.13 78 RRH-1001
100 6.50 9.75 13.25 6.25 2-3/4-16 .75 2.13 101 RRH-1003
150 10.12 12.75 19.25 6.25 2-3/4-16 .75 2.13 85 RRH-1006
1.50 17.25 27.38 6.25 4-16 1.00 3.13 135 RRH-10010
3.00 6.50 8.00 8.38 4-16 1.00 3.13 175 RRH-1508
6.00 10.00 13.00 8.38 4-16 1.00 3.13 235
10.13 13.50 19.50 8.38 4-16 1.00 3.13 245
8.00 18.13 28.25 8.38 4-1/4”-12 1.00 3.13
13.75 21.75 9.75

Single Acting Hollow Aluminum Cylinders SPECIFICATIONS

Cylinder Stroke Collap. Ext. Outside Center Weight Item #
Capacity Height Height Diam. Hole Diam.
(ton max) (in.)
20 (25.3) 1.97 A B DY
5.91 (in.) (in.) (in.) (in.) (lbs.)
1.97
30 (39.6) 5.91 7.41 9.37 3.94 1.06 11.5 RACH-202
3.94 12.41 18.32 3.94 1.06 15.7 RACH-206
5.91 8.20 10.17 5.12 1.34 17.6 RACH-302
5.91 13.12 1.34 24.7 RACH-306
12.41 19.02 5.12 2.13 43.0 RACH-604
14.97
60 (65.6) 16.34 7.09 2.13 50.3 RACH-606
100 (127.5) 15.39
RACH-Series 20.87 7.09

21.31 9.84 3.11 101.9 RACH-1006

74

Pull Cylinders Cylinders & Punches

Vertical Lifting Wedge

LW16

BRP-Series

SPECIFICATIONS

Cylinder Stroke Collap. Ext. Outside Link Link Link Link Weight Item #
Capacity Height Height Diam. Height Opening Thickness Width
(ton) A B D J L M N
[max] (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (lbs.)

10 6 23.11 29.06 3.35 4.72 2.44 1.19 1.38 35 BRP-106C SPECIFICATIONS
[11.6] 6 22.24 28.19 3.35 2.64 4.53 0.88 1.19 24 BRP-106L Max. Item # Min. Max. Lift Max. Max. Lifting Height Oil Weight
Lifting Clearance Per Lifting Using Stepped Capacity
30 6 42.74 48.82 5.39 4.49 5.71 1.38 1.57 106 BRP-306 Force Gap Stage Height Block
[36.1] (ton) (in.) (in.) (in.) (in.) (in3) (lbs)

60 6 28.34 34.32 5.51 5.13 5.90 1.5 1.97 118 BRP-606 16 LW16 .39 .83 2.02 2.72 4.75 15.4
[58.8]

35 Ton Hydraulic Punch

FEATURES Steel Qualities (see Table):

• 35 ton hydraulic steel punch for holes up to 1/2" thick mild 1. Mild A-7
steel holes, matched with hydraulic electric pump. 35 lbs. 2. Boiler Plate
3. Structural A-36
SPECIFICATIONS 4. Struct Corten (ASTM A242
5. Cold Rolled C-1018
Hole Imperial* Maximum Allowable Material Thickness Standard 6. Hot Rolled C-1050
Shape To Be Punched Punch & 7. Hot Rolled C-1095
Hole Bolt Die Set 8. Hot Rolled C-1095 Annealed
Size Size (in) 9. Stainless Annealed
(in) (in) 10. Stainless 304 Hot Rolled
11. Stainless 316 Cold Rolled
(in) (in) 1 2 3 4 5 6 7 8 9 10 11 Item #

.31 1/4 .31 .31 .25 .25 .25 .25 .13 .19 .25 .25 .25 SPD-313
.38 5/16 .38 .38 .31 .31 .31 .31 .19 .25 .31 .31 .31 SPD-375
.44 3/8 .44 .44 .38 .38 .38 .31 .19 .31 .31 .31 .31 SPD-438
.53 7/16 .50 .50 .44 .44 .44 .38 .25 .31 .38 .38 .38 SPD-531
.56 1/2 .50 .50 .50 .44 .50 .44 .25 .38 .44 .44 .44 SPD-563
.69 5/8 .50 .50 .50 .44 .50 .40 .25 .31 .40 .40 .40 SPD-688
.78 - .50 .50 .50 .44 .50 .38 .25 .31 .38 .39 .38 SPD-781
.81 3/4 .50 .50 .50 .44 .50 .31 .19 .31 .31 .31 .31 SPD-813

* Material thickness should not exceed hole diameter

50 Ton Hydraulic Punch

FEATURES Steel Qualities (see Table):

• Available as a complete set including electric pump & hoses 1. Mild A-7
• Double-acting cylinder design for fast cycle times 2. Boiler Plate
• Punch and die changeover and CR-400 female couplers included 3. Structural A-36
• Lifting handle for easy carrying 4. Struct Corten (ASTM A242
• Adjustable power stripper prevents movement of the metal during stripping 5. Cold Rolled C-1018
6. Hot Rolled C-1050
SPECIFICATIONS 7. Hot Rolled C-1095
8. Hot Rolled C-1095 Annealed
9. Stainless Annealed
10. Stainless 304 Hot Rolled
11. Stainless 316 Cold Rolled

Hole Imperial* Maximum Allowable Material Thickness Standard
Shape To Be Punched Punch &
Hole Bolt Die Set
Size Size (in)
(in) (in)

(in) (in) 1 2 3 4 5 6 7 8 9 10 11 Item #

.53 1/2 .53 .53 .53 .53 .53 .49 .32 .40 .49 .49 .49 SP-150
SP-170
.66 5/8 .56 .56 .56 .50 .56 .51 .32 .40 .51 .51 .51 SP-190
SP-21
.78 3/4 .56 .56 .56 .50 .56 .49 .32 .40 .49 .50 .49 SP-123

.91 7/8 .56 .56 .56 .50 .56 .35 .22 .35 .35 .35 .35

1.03 1 .56 .56 .56 .44 .56 .31 .19 .31 .31 .31 .31

* Material thickness should not exceed hole diameter

877.446.4352 www.superiortoolrental.com www.midlandtool.com 75

Lifting Bags B22A BC1A
22 Ton Air Bag 22" x 22" Air Regulator
Air Lifting Bags BHB16A
16' Blue Hose
FEATURES
BC3A
• Capacities ranging from 1.1 to 77 tons Deadman Controller
• Lifting Height: 2.7 - 20.5 in. BHY16A
• Operate on standard shop air, up to 116 psi 16' Yellow Hose
• All models feature 2-ply Kevlar® with neoprene
• Wide variety of safety controllers for single and

multiple-bag systems
• Light weight for easy set up
• B22A - B77A items feature side holes for attaching

bags together

B22A

SPECIFICATIONS

Item # Capacity Maximum A B C Air Required Maximum Weight
(tons) Lifting Height Length Width Thick @ 116 PSI Burst Pressure
(cu.ft.) (lbs)
(in) (in) (in) (in) 0.18 (PSI) 1.32
6 6 1.1 0.53 464 2.8
B1A 1.1 2.7 9 9 1.1 1.48 464 5.3
12 12 1.1 3.04 464 8.8
B3A 3.1 5.1 15 15 1.1 5.37 464 11.6
18 18 1.1 10.45 464 17.8
B6A 6.4 5.9 22 22 1.1 14.7 464 24.6
24 24 1.2 21.9 464 29.9
B11A 10.8 7.0 27 27 1.2 32.5 464 40.1
31 31 1.2 46.8 464 49.6
B14A 14.2 8.6 35 35 1.2 53.1 464 55.8
38 38 1.2 464
B22A 22.7 10.6
B28A 27.7 11.8
B35A 35.3 14.1
B46A 46.4 16.5
B59A 58.8 17.7

B77A 77 20.5

76

Air Hoists

877.446.4352 www.superiortoolrental.com www.midlandtool.com 77

1/4 – 10 Ton

1/4 TON COMES WITH 1 TON 2 TON 2 TON S.S. 3 TON
AIR PENDANT CONTROL

1 TON MINI

3 TON S.S. 4 TON 6 TON 6 TON S.S. 8 TON 10 TON

1/4 – 10 TON SPECIFICATIONS

Item # 1/4 1 Mini 1 2 2 S.S. 3 3 S.S. 4 6 6 S.S. 8 10

Air Pressure PSI 85 85 85 85 85 85 85 85 85 85 85 85
6 6 6 6 6
Bar 6 6 66 6 6 6 6.3 6 6.3 10
13,860 13,200 17,600 22,000
Capacity mt 1/4 1 12 2t 3mt 3.2 3.2 2 1 2 2
16.4 21 16.4 10.5
Capacity lbs. 550 2,200 2,200 2,400 4,000 6,600 7,040 8,800 8.2 10.4 8.2 5.2
17.7 22.4 17.7 11.2
Number of Chain Strands 11 12 1 2 1 1 195 195 195 195
G3/4 G3/4 G3/4 G3/4
Lifting Speed Without Load ft./min. 137.8 32.8 36.1 18 32.8 16.4 32.8 32.8 3/4 3/4 3/4 3/4
242.5 304.9 242.5 343.9
Lifting Speed at Full Load ft./min. 65.6 16.4 18 8.9 19.7 9.8 16.4 16.4 13 x 36 16 x 45 13 x 36 16 x 45
2.6 3.9 2.6 3.9
Lowering Speed at Full Load ft./min. 124.7 32.8 36.1 18 39.4 18.0 35.4 35.4 78 78 78 78
80 80 80 80
Max Air Consumption cfm 53 56.5 53 53 127 127 195 195

Air Connection G1/2 G1/2 G1/2 G1/2 G3/4 G3/4 G3/4 G3/4

Hose Dimension (ø inside) inch. 1/2 1/2 1/2 1/2 3/4 3/4 3/4 3/4

Weight at Standard 10 ft. Lift lbs. 59.5 51 61.7 75 123 146 189 189

Chain dimension mm. 7 x 21 7 x 21 7 x 21 7 x 21 9 x 27 9 x 27 13 x 36 13 x 36

Weight of 3.28 ft. (1m) Chain lbs. 2.2 2.2 2.2 2.2 1.2 1.2 2.6 2.2

Sound Level at Lifting 74 77 76 76 77 77 78 78
Full Load1 dB(A) 80
Lowering 78 83 78 78 80 80 80

• With overload protection 1 Measured at 1 m distance acc. to KIN 45635 part 20 G British Straight Thread

DIMENSIONS (in.)

Item # 1/4 1 Mini 1 2 2 S.S. 3 3 S.S. 4 6
A Min. Headroom1 17.7 18.0 17.7 19.6 18.9 21.4 23.3 23.3 26.5
B 11.3 12.4 11.3 13.2 11.5 14.0 14.7 14.7 17.9
C 5.7 5.8 5.7 5.7 7.9 7.9 9.2 9.2 9.2
D 11.7 11.5 11.7 13.7 16.2 16.2 19 19 19
E1 1.1 1.1 1.1 1.1 1.1 1.1 1.6 1.6 1.6
E2 1.1 1.1 1.1 1.1 1.0 1.1 1.2 1.6 1.6
F up to Hook Center 5.4 5.8 5.4 5.4 6.7 5.5 7.4 7.4 6.1
G Maximum Width 6.9 9.2 6.9 7.2 8.5 8.5 9.2 9.2 9.2

1 Chain containers increase the headroom

78

12 – 60 Ton

12 TON 16 TON 20 TON 25 TON 30 TON 37.5 TON
Protective Wrap for
Air Pendant Control Right Angle Fitting

40 TON 50 TON 60 TON Available
1/4 Ton thru 20 Ton Units

12 – 60 TON SPECIFICATIONS

Item # 12 16 20 25 30 37.5 40 50 60
85
Air Pressure PSI 85 85 85 85 85 85 85 85 6
Bar 6 6 66 6 6 6 6 60
40 50 132,000
Capacity mt 10 16 20 25 30 37.5 88,000 110,000 4
3 4 4.3
Capacity lbs. 26,400 35,200 44,000 55,000 66,000 82,500 5.6 4.3 1.5
2.3 1.8 5.3
Number of Chain Strands 23 42 2 3 6.6 5.3 230
230 230 G1-1/2
Lifting Speed Without Load ft./min. 10.5 6.6 4.6 7.9 7.9 5.6 G1-1/2 G1-1/2 1.38
1.38 1.38 2,072
Lifting Speed at Full Load ft./min. 5.2 3.3 2.3 4.1 3.3 2.5 1,874 2,072 23.5 x 66
23.5 x 66 23.5 x 66 8.2
Lowering Speed at Full Load ft./min. 11.2 6.9 5.3 9.2 9.2 6.6 8.2 8.2 78
78 78 82
Max Air Consumption cfm 195 195 195 230 230 230 82 82
60
Air Connection G3/4 G3/4 G3/4 G1-1/2 G1-1/2 G1-1/2
58.5
Hose Dimension (ø inside) inch. 3/4 3/4 3/4 1.38 1.38 1.38
37.4
Weight at Standard 10 ft. Lift lbs. 343.9 529.1 627 1,213 1,213 1,874
21.3
Chain Dimension mm. 16 x 45 16 x 45 16 x 45 23.5 x 66 23.5 x 66 23.5 x 66
42.5
Weight of 3.28 ft. (1m) Chain lbs. 3.9 3.9 3.9 8.2 8.2 8.2
3.9
Sound Level at Lifting 78 78 76 78 78 78
Full Load1 dB(A) Lowering 80 83 80 82 82 82 3.9

• With overload protection 1 Measured at 1 m distance acc. to KIN 45635 part 20 G British Straight Thread 9.8

DIMENSIONS (continued) (in.) 16.9

Item # 6 S.S. 8 10 12 16 20 25 30 37.5 40 50

A Min. Headroom1 27 26.5 32 32 35.4 40.6 49.6 49.6 57.9 57.9 58.5

B 16.6 17.9 21.6 21.6 23.5 26.4 32.6 32.6 36.8 36.8 37.4

C 12.1 9.2 12.1 12.1 15 15 17.7 17.7 21.3 21.3 21.3

D 22.6 19 22.6 22.6 27.2 27.2 35.4 35.4 42.5 42.5 42.5

E1 1.7 1.6 1.7 1.7 2.1 3 3.0 3.0 3.9 3.9 3.9

E2 1.5 1.6 1.7 1.7 2.1 3 3.0 3.0 3.9 3.9 3.9

F up to Hook Center 5 6.1 7.8 7.8 7.8 7.1 10.6 10.5 11.2 11.2 9.8

G Maximum Width 10.5 9.2 12 12 12.1 12.4 17.5 17.5 16.9 16.9 16.9

1 Chain containers increase the headroom

877.446.4352 www.superiortoolrental.com www.midlandtool.com 79

Chain Containers SPECIFICATIONS CC CC Max Lift Redundant
Hoist Item # Material Capacity Support
Hoist with Chain Container System
Capacity 14307 Polyurethane 10 ft Required
80 14308 Polyurethane 20 ft
0.25 - 1 Ton 14309 Polyurethane 40 ft –
14300 40 ft –
2 Ton Double 14301 Steel 66 ft –
2 Ton S.S. 14302 Steel 100 ft –
14303 Steel 165 ft –
3 Ton S.S. 14304 Steel 216 ft Yes
3 Ton Double 14305 Steel 43 ft Yes
14306 Steel 76 ft Yes
6 Ton S.S. 14308 Steel 10 ft –
14309 Polyurethane 20 ft –
6 Ton Double 14300 Polyurethane 20 ft –
14301 Steel 33 ft –
10 & 12 Ton 14302 Steel 50 ft –
16 Ton 14303 Steel 82 ft –
20 Ton 14304 Steel 108 ft Yes
14305 Steel 22 ft Yes
25 & 30 Ton 14306 Steel 38 ft Yes
16644 Steel 15 ft –
16650 Steel 26 ft –
16651 Steel 43 ft –
16652 Steel 62 ft –
16653 Steel 98 ft –
16654 Steel 131 ft Yes
13738 Steel 13 ft Yes
13739 Steel 20 ft Yes
13740 Steel 33 ft –
13741 Steel 52 ft –
13742 Steel 75 ft –
13743 Steel 128 ft –
13744 Steel 181 ft Yes
13745 Steel 255 ft Yes
13746 Steel 376 ft Yes
16650 Steel 13 ft Yes
16651 Steel 21 ft Yes
16652 Steel 31 ft –
16653 Steel 46 ft –
16654 Steel 65 ft Yes
13747 Steel 20 ft Yes
13748 Steel 32 ft Yes
13749 Steel 50 ft –
13750 Steel 82 ft –
13751 Steel 116 ft –
13752 Steel 168 ft Yes
13753 Steel 242 ft Yes
13762 Steel 336 ft Yes
13739 Steel 10 ft Yes
13740 Steel 16 ft Yes
13741 Steel 26 ft –
13742 Steel 37 ft –
13743 Steel 64 ft –
13744 Steel 90 ft Yes
13745 Steel 125 ft Yes
13746 Steel 188 ft Yes
13747 Steel 10 ft Yes
13748 Steel 16 ft Yes
13749 Steel 25 ft –
13750 Steel 41 ft –
13751 Steel 58 ft –
13752 Steel 84 ft Yes
13753 Steel 121 ft Yes
13762 Steel 168 ft Yes
13754 Steel 6 ft Yes
13755 Steel 10 ft Yes
13756 Steel 16 ft –
13757 Steel 26 ft –
13758 Steel 39 ft –
13759 Steel 56 ft Yes
13760 Steel 81 ft Yes
14524 Steel 12 ft Yes
14525 Steel 21 ft Yes
14526 Steel 29 ft Yes
14527 Steel 42 ft Yes
TBD Steel 20 ft Yes
TBD Steel 30 ft Yes
14945 Steel 43 ft Yes
TBD Steel 61 ft Yes
Steel Yes
Yes

All of our chain passes through a chain tumble Accessories
before every rental
Chain Tumbler

Variable Sizes and Lengths of Chain Ready for Shipment

60 Gallon Manifold Tank Hoist with Air Pendant

Oiler, Regulator
and Filter

Combination

INCLUDED AVAILABLE UPON REQUEST

OILER / FILTER CABLE CONTROL AIR PENDANT REGULATORS

877.446.4352 www.superiortoolrental.com www.midlandtool.com 81

Test Stand

We test and certify 1/4 ton – 60 ton manual and air hoists.

82

Motor Pneumatic Trolleys
Beam Trolleys & Clamps

877.446.4352 www.superiortoolrental.com www.midlandtool.com 83

MTrootlolreyPsneumatic

3 Ton 6 Ton 10 / 16 Ton

Shown as suspended Shown as suspended Shown as suspended

DIMENSIONS (in) K L MN
3.7 1.1 1.7 4.6
TROLLEY W/Pin W/Hook 3.7 1.1 1.7 4.6
SKU CAPACITY A B MAX C d D E F GH J J 3.7 1.1 1.7 4.6
3.7 1.0 1.6 4.6
1/4 Ton Hoist 2 Ton 9.8 5.1 b + 1.4 2.8 7.2 5.4 1.5 5.7 6 - 22.2 3.7 1.1 1.7 4.6
4.2 1.2 1.7 5.4
1/2 Ton Hoist 2 Ton 9.8 5.1 b + 1.4 2.8 7.2 5.4 1.5 5.7 6 - 22.2 4.2 1.1 1.7 5.4
7.4 1.2 1.7 9.3
1 Ton Hoist 2 Ton 9.8 5.1 b + 1.4 2.8 7.2 5.4 1.5 5.7 6 - 22.2 7.4 1.6 2.4 9.3
7.4 1.6 2 9.3
2 Ton SS Hoist 2 Ton 9.8 5.1 b + 1.4 2.8 7.3 6.7 1.7 7.9 3.3 - 23.7 7.4 1.6 2 9.3
7.4 1.7 2.6 9.3
2 Ton Hoist 2 Ton 9.8 5.1 b + 1.4 2.8 7.2 5.4 1.8 5.7 6 - 24.1 7.4 1.7 2.6 9.3
7.4 2.1 3.2 9.43
3 Ton SS Hoist 3 Ton 11.5 4.4 b + 2.4 3.3 7.5 7.4 1.8 9.2 9.8 25 31.4 8.6 2.9 3.4 10.8
N/A N/A N/A N/A
3 Ton Hoist 3 Ton 11.5 4.4 b + 2.4 3.3 7.5 5.5 3.0 7.9 3.3 24.1 -

4 Ton Hoist 6 Ton 19.7 5.6 b + 2.8 6.5 8.1 5.5 1.8 9.2 9.8 24.1 -

6 Ton SS Hoist 6 Ton 19.7 5.6 b + 2.8 6.5 8.1 5 3.5 12.1 10.5 34.2 44.2

6 Ton Hoist 6 Ton 19.7 5.6 b + 2.8 6.5 8.1 6.1 3.1 9.2 9.8 30 36.2

8 Ton Hoist 10 Ton 19.3 5.6 b + 2.8 6.5 12.9 6.1 3.1 9.2 9.8 - 41.6

10 Ton Hoist 10-16 Ton 19.3 5.6 b + 2.8 6.5 12.9 7.8 4.3 12.1 10.5 37 46.3

12 Ton Hoist 10-16 Ton 19.3 5.6 b + 2.8 6.5 12.9 7.8 4.3 12.1 10.5 37 46.3

16 Ton Hoist 10-16 Ton 19.3 5.6 b + 2.8 6.5 12.9 7.8 4.3 1.5 12.2 39 46.1

20 Ton Hoist 20 Ton 23.6 5.2 b + 2.7 7.3 12.9 7.1 5.3 1.5 12.2 44.3 46.1

25 Ton Hoist 25 Ton N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

* Chain containers increase the hoist headroom

84

MoAtcocreTsrsoolrlieesy

Hoist Load Eyes Item # For use with
11179 & 11180 3 Ton Trolley
Ton 11179 & 11180 3 Ton Trolley
1/4 & 1/2 16569 & 16664 3 Ton Trolley

1&2 13457 –
2 S.S. & 3 D.S. 13458 –
13459 –
3 13460 –
6 13589 –
10 J14939 & 02269 –
16
20 Item #
25
13505
Trolley Load PINS 13672

PINS Flange Range 70294
2 Ton Trolley 70295
70296
PIN I 1.96 - 7.87 in. 70297
55675
PIN II 7.87 - 11.02 in.
70431
3 Ton Trolley 70432
70433
PIN I 2.16 - 4.64 in. 55676

PIN II 4.68 - 6.93 in. 70406
70407
PIN III 6.96 - 9.68 in. 70408
70409
PIN IV 9.72 - 12.20 in. 55677

Suspension Link Kit 3t 73271
(joins a hook mount hoist to trolley) 73680
6 Ton Trolley 74410

PIN I 4.92 - 7.40 in. 70406 2 req.
70407 2 req.
PIN II 7.48 - 9.68 in. 70408 2 req.

PIN III 9.72 - 12.20 in.

Suspension Link Kit 6t
(joins a hook mount hoist to trolley)

16 Ton Trolley

PIN I 4.92 - 7.40 in.

PIN II 7.48 - 9.68 in.

PIN III 9.72 - 12.20 in.

PIN IV 12.87 - 16.61 in.

Suspension Link Kit 16t
(joins a hook mount hoist to trolley)
20 Ton Trolley

PIN I 4.92 - 7.40 in.

PIN II 7.48 - 9.68 in.

PIN III 9.72 - 12.20 in.
25 Ton Trolley

PIN I 4.92 - 7.40 in.

PIN II 7.48 - 9.68 in.

PIN III 9.72 - 12.20 in.

877.446.4352 www.superiortoolrental.com www.midlandtool.com 85

Beam Trolleys FOR RENT ONLY

1 Ton DIMENSIONS (in.)

T101 V2 Item # T101 V2 T103 V2 T106 V2 T110 V2
3 Ton 3T 6T 10T
Capacity** 1T 4 4 4
8 10 11
A Min 3 13.3 17.6 21
10 12.6 13
A Max 8.5 6 7.5 8.2
5.1 6.3 12.5
B 13.1 1 1.2 2.1
44 180.4
C 8.3 101.2

D 4.6

E 3.9

F 1.2

Weight (lbs) 19.8

** Capacity expressed in metric tons

1T, 3T, 6T & 10T

T103 V2
6 Ton

T106 V2
10 Ton

T110 V2

86

Beam Trolleys

FOR PURCHASE OR RENT
Autolock Runway Beam Trolleys with Anti-Drop Plates

DIMENSIONS (in.)

Item # WLL at AmdjWiunsi-dtmmthaexnt To Accom. To Inside Headartoom AWveerigahgte
0° Beam Accom. toSChSraopcwakcnleer min-max (lbs.)
Flange
V(elbrtsic.)al ThFimlcakannxge.ess Thickness

max.

A B C D min max

A1 6720 3 - 8 5-1/8 1 5-1/4 - 9 46

A2 13440 4 - 12 3/4 1-1/4 5-5/8 - 17 73

A3 22400 4 - 12 3/4 1-1/4 5-1/2 - 19 105

Adjustable Runway Beam Trolleys with Anti-Drop Plates

DIMENSIONS (in.)

Item # WLL at Width To Accom. Inside Headroom Average
0° Adjustment Beam Shackle mina-mt ax Weight
Crown min max (lbs.)
V(elbrtsic.)al min-max Thickness to Spacer
max.

ABC

BA1 2240 2-1/2 - 8 1 4 9-3/4 8 14

BA2 3360 3 - 8 1 4 9-3/4 8 15

BA3 4480 3 - 8 1 4 9-3/4 8 15

Adjustable Runway Beam Trolleys

DIMENSIONS (in.)

Item # WLL at AmdjWiunsi-dtmmthaexnt To Accom. Inside Headroom AWveerigahgte
0° Beam SWhaidctkhle at (lbs.)

V(elbrtsic.)al ThFimlcakannxge.ess C min-max

AB 4-3/4 min max
3-7/8
B1 6720 3 - 8 1-1/8 5-1/8 11 9-1/2 52
14 12 110
B2 13440 4 -12 1-1/4 15 12 164

B3 22400 4 - 12 1-1/4

Geared Runway Beam Trolleys with Anti-Drop Plates

DIMENSIONS (in.)

Item # WLL at Width To Accom. Inside Headroom AWv(leebrisga.hg) te
0° Amdjiuns-tmmaexnt Beam Shackle at
Flange Crown
V(elbrtsic.)al to Spacer min-max
Thimckanxe. ss min max
C
AB

GB1 6720 3 - 8 1-1/8 4 11 9-1/2 68

GB2 13440 4 -12 1-1/4 4 14 12 127

GB3 22400 6 - 12 1-1/2 5-1/8 15-3/4 12 183

GB3 22400 8 - 18 3 8 23 19-1/2 164

GB3 22400 8 - 18 3 8-3/4 - - 164

877.446.4352 www.superiortoolrental.com www.midlandtool.com 87

Beam Clamps

FOR PURCHASE OR RENT

Adjustable Double Ended Monorail Construction Clamps

DIMENSIONS (in.)
Jaw Grip Jaw
*WLL at Adju(isntm.) ent Aperture Max. Height Headroom Avg.
Item # 0° Vertical (in.) Adjustment at min-max Weight
A B (in.) (lbs.)
(lbs.) (in.)
min max 20
23
S7 6720 3 - 7-1/2 7/8 - 8-1/2 7-1/2 41
44
S7A 6720 3 - 7-1/2 7/8 1-1/4 32 8-1/2 7-1/2

S8 8960 6 - 10 7/8 - 10-1/2 9-3/4

S8A 8960 6 - 10 7/8 1-1/4 32 10-1/2 9-3/4

* Approved for Personnel tie-off use

Universal Superclamp

DIMENSIONS (in.)

Item # * WVe(LlbrLtsica.)at l0° Adjustment To Accommodate AWveerigahgte
Min-Max (in.) Beam Flange (lbs.)

A Thickness Max. (in.) 30
B 52
USC3A 6720 6-8 63
1 63
USC4 8960 6 - 12 1 74
1 95
USC5 11200 6 - 12 1-1/2
1
USC5A 11200 6 - 12 1

USC5D 22400 6 - 12

USC5D400 22400 9 - 16

* Approved for Personnel tie-off use

Swivel Jaw Adjustable Girder Clamps

DIMENSIONS (in.) Headroom
Jaw Grip at min-max
Item # WVLe(lLbrtsaic.t)a0l ° Adjustment Jaw Inside Shackle W(Alebvisgg.h.) t
Min-Max (in.) Aperture Crown to Spacer (in.)
min max
A (in.) (in.)
S5 6720 3-1/2 - 12 B C
S5A 6720 3-1/2 - 12 1 3-3/4 11-3/4 8-3/4 22
S6 11200 3-1/2 - 12 1 4-1/2 12-1/4 9-1/4 31
1 4-1/2 12-1/4 9-1/4 31
S6A 11200 3-1/2 - 12 1 4-1/2 12-1/2 9-1/2 34
S11 22400 3-1/2 - 12 1 4-1/2 13-1/2 11-1/2 47

Permanently Fixed Adjustable Girder Clamps

DIMENSIONS (in.)

Item # WVLeLrtaicta0l ° Jaw Grip ApJe(airnwt.u) re Inside Shackle Headroom Avg.
(lbs.) MAidnj-uMstamx e(innt.) Crown to Spacer at min-max Weight
(lbs.)
(in.) (in.)
min max
AB C

PFC1 2240 3 - 7-1/2 7/8 1-1/2 5-1/2 4-1/2 4

PFC2 4480 3 - 7-1/2 7/8 1-1/2 5-1/2 4-1/2 6

PFC3 6720 3 - 7-1/2 7/8 1-1/2 - -7

Fixed Adjustable Girder Dog

DIMENSIONS (in.) Inside Shakle Inside Headroom
WLL at 0° AJdajuwstGmreipnt Crown to Shakle Width at min-max
Item # Vertical ApJearwture Spacer (in.) W(Alebvisgg.h.) t
(lbs.) (in.) (in.) (in.) (in.)
min max
ABC D

S15 44800 8 - 18 2 8-1/8 4-9/16 20-1/2 18-1/2 144

S16 44800 16 - 24 2-1/2 8-1/8 4-9/16 22-1/2 19-1/4 170

S17 56000 8 - 18 2 8-1/8 5-1/8 20-1/4 17 166

S18 56000 16 - 24 2-1/2 8-1/8 5-1/8 22-3/4 19-3/4 198

S19 67200 8 - 18 2-1/2 8-1/8 5-1/8 20-1/4 17 203

S20 67200 16 - 24 3 8-1/8 5-1/8 22-3/4 20-1/4 236

Fixed Jaw Adjustable Girder Clamps

DIMENSIONS (in.)

Item # * WLL at 0° Jaw Grip Jaw CIrnoswidne(tiSno.h)Sapcakcleer Headroom Avg.
Ve(lbrtsic.)al Adjustment Aperture at min-max Weight
(lbs.)
(in.) (in.) (in.)
A 9
B C min max 11
18
S1 4480 3 - 7-1/2 7/8 3-3/4 8-1/4 6-1/4 24
S2 6720 3 - 7-1/2 7/8 22
S2A 6720 3 - 7-1/2 7/8 3-3/4 8-1/2 7-1/2 33
S3 8960 7/8 41
S3X 11200 6 - 10 7/8 3-3/4 9 8-1/2 60
S3A 11200 3 - 7-1/2 1-5/8 109
S4S 13440 1-5/8 3-7/8 10-1/2 9-3/4 129
S4A 22400 6 - 12 1-5/8
S12 33601 8 - 18 4-1/8 9-1/2 8-3/4
S14 33601 8 - 18 2
8 - 18 2-1/2 4-1/8 11-1/2 10-1/2
16 - 24
4-1/8 16 3-3/4

4-1/2 16 3-3/4

* Approved for Personnel tie-off use 5-7/8 19-1/2 16-3/4

5-7/8 22-1/4 19

88

Campbell® Clamps

FOR PURCHASE OR RENT

Pipe Lifting Clamps

DIMENSIONS (in.)

Item # VeaWrttL0icL°al Adjustable to Fit Inside Shackle Inside Average
Outside Diameter Crown to Spacer Shackle Width Weight
(lbs.) (lbs.)
(in.) (in.) (in.)
B C 15
A 28
3-7/8 2-7/8 36
P1 2240 2-1/2 - 4-1/2 3-7/8 2-7/8 58
3-7/8 2-7/8 69
P2 3360 4-7 3-3/4 79
4 3-3/4 110
P3 4480 5-9 4 3-3/4 140
4 3-3/4 169
P4 6720 7 - 11 4 4-5/8
4-3/4 4-5/8
P5 6720 8 - 13 4-3/4

P6 6720 9 - 15

P7 6720 10 - 17

P8 8960 12 - 19

P9 8960 16 - 24

Adjustable Angle Section Clamps

DIMENSIONS (in.)

Item # WLL ToSeFcittiAonngsle Jaw Inside SIWhnasidcidtkhele Average
AC1 Vealbrtts0ic.°al A Aperture Shackle D W(lebisg.h) t
1120 Crown to
1-1/2 - 4 B Spacer 2-3/4 10
9/16 10
C 24
47
4

AC2 2240 1-1/2 - 4 9/16 3-3/4 2-3/4

AC3 3360 2-6 7/8 2-7/8 3-1/2

AC4 6720 4-8 1 4 4

Model BC Locking Type Clamps

DIMENSIONS (in.)

Working Flange Flange Weight
Load Limit at Width Thickness (lbs.)

0°- 20° B 9-1/2
Vertical Tons A C D E F G H 13-1/2
22-1/2
1-1/2 3-7-1/2 1/4 - 5/8 11-7/8 11-3/4 3 1/2 5 5-3/4
11-7/8 12 3 5/8 5-3/16 6-3/4 53
3 3-7-1/2 1/4 - 5/8 3-1/4 3/4 6-5/16 6-3/4 120
17 14-7/8 4 1-1/2 7-1/8 450
5 6 - 10 1/2 - 7/8 21-1/4 19-1/8 4-1/2 1-3/4 8-3/8 9
26-1/2 5 12
10 6-12 1/2 - 1-1/4 32 40-1/2 2 15 15
61
15 8-18 7/8 - 2

25 18-40 2-3

Adjustable Universal Rail Lifting Clamps

DIMENSIONS (in.)

Item # * WLL at 0° Jaw Grip Inside Shackle Average
Ve(lbrtsic.)al Adjustment Crown to Spacer Weight
R1 (lbs.)
R2 6720 A B
R1-59 11200 13
11200 STD AREA Rail 3-3/8 21
& Crane Rail 4-1/4 33
Trolley Rail 4-1/4

Plate Clamps

Cam position Cam under load.
under no load. The heavier the load,
the greater the bite.

Item # Grip Range LimWito(rMkientgriLcoTaodns) W(lebisg.h) t A B DIMENSIONS (in.) J O P
(in.)
C D E FH

SAC-1 0 to 1" 1 t 6.25 5-1/4 7-3/4 4 1-3/4 2-7/8 1/2 1-1/2 2-1/4 6-1/4 1-23/64

SAC-3 0 to 2" 3t 17 7-3/4 10-1/2 6-1/2 1-7/8 3-3/8 3/4 2-3/8 3-3/4 9-1/4 1-13/16

SAC-6 0 to 3" 6t 39 10 14-1/4 8-1/4 3-1/4 4-1/2 1-1/8 3 4-1/2 12 2-1/4

877.446.4352 www.superiortoolrental.com www.midlandtool.com 89

B&eTarmolClleaymsps FOR PURCHASE ONLY

CORSO Overhead Push Trolleys

Push Trolleys - Flange Adjustment with Crank DIMENSIONS (in.) rcMaudirnivuie.s
35.4
Item # Size (ton) Flange Size (in.) Weight (lbs) Item # A B C D E F G H I R FF 39.37
47.24
23309 1/2 Ton 2 - 8.66 18.7 23309 8.86 12.76 3.46 0.63 0.98 0.63 1.06 2.09 0.43 4.33 1.97 – 8.66 51.18
23319 1 Ton 2.28 - 8.66 23.2 23319 9.92 13.15 4.06 0.67 1.18 0.67 1.18 2.44 0.59 4.33 2.28 – 8.66 55.12
23329 2 Ton 3 - 8.66 39.7 23329 11.81 13.46 5 0.83 1.57 0.83 1.50 3.15 0.71 4.33 3 – 8.66 N/A
23379 3 Ton 2.91 - 8.66 70.5 23379 14.17 14.09 6.97 0.83 1.89 0.83 1.77 3.82 0.59 4.33 2.91 – 8.66
23389 5 Ton 3.5 - 8.66 106.9 23389 15.75 14.65 7.56 1.22 3.28 1.22 2.05 4.33 0.79 4.33 3.5 – 8.66

056279 10 Ton 4.9 - 12.6 220 056279 18.50 21.65 11.02 N/A N/A N/A N/A N/A N/A N/A N/A

CORSO Beam Clamps

Item # Size (ton) Flange Size Weight (lbs.) DIMENSIONS (in.) B max. C D E F max. F min. GxH
15 3 5/32 8-17/64 6-7/8 4-7/8 1-3/16 x 1-3/4
CC07009 1 Ton 3 - 9.3 11 Item # A max. B min. 15 3-5/16 15/64 8-17/64 7-1/8 5-1/8 1-3/16 x 1-5/8
CC07019 2 Ton 3-9 12 CC07009 10-5/8 7-3/32 4-17/32 5/16 10-7/8 9-7/8 6-7/8 1-3/4 x 2-5/8
CC07029 3 Ton 3.7 - 13.2 24 CC07019 10-5/8 7-11/64 19-19/64 5-7/16 25/64 9-3/4 8-21/32 5-1/2 1-3/4 x 1-3/8
CC07039 5 Ton 3.7 - 13 27 CC07029 14-11/64 9-1/4 19-19/64 6-19/64 15/32 10-7/8 11-13/16 9-7/8 2-3/8 x 3-1/2
CC07049 10 Ton 3.5 - 13.8 46 CC07039 13-15/16 9-61/64 18-57/64
CC07049 12-19/32 10-3/64

VESTIL Trolleys

DIMENSIONS (in.)

Item # Fits Beam Capacity (tons) Weight (lbs) Item # A (min - max) B C D E (min - max) F (min - max) G HI
Flange Width 3-3/8 - 6-3/4 10-1/4 8-1/2 6-3/4 3-3/8 - 6-3/4 3-1/4 - 5 2-3/8 3/8 2-3/4
QIT-1 1/2 15 QIT-1 10-5/8 5/8 2-3/4
QIT-2 3 to 5 1 20 QIT-2 4 - 7 12 10-1/2 7 4-7 3-1/8 - 4-5/8 3 5/8 3
QIT-4 3 to 5 2 25 QIT-4 3 - 7 12 12-3/8 6-3/4 4-9/16 - 8-9/16 3-9/16 - 5-9/16 3-1/4 1 4-1/4
QIT-6 3 to 7-1/2 3 45 QIT-6 3 - 9-1/4 14-9/16 17-1/4 5-3/4 - 10-11/16 3-11/16 - 6-3/16 7-5/8 1 5-1/4
QIT-8 3 to 7-1/2 4 70 QIT-8 4 - 11-3/4 20-3/8 17-1/4 11 2-11/16 - 5-3/16 4-1/4 1 5-1/4
QIT-10 4 to 11-3/4 5 75 QIT-10 4 - 11-3/4 20-3/8 17-1/4 13-5/8 10 - 15 2-11/16 - 5-3/16 4-1/4 1 5-1/4
QIT-12 4 to 11-3/4 6 80 QIT-12 4 - 11-3/4 20-3/8 13-5/8 10 - 15 2-11/16 - 5-3/16 4-1/4
4 to 11-3/4 13-5/8 10 - 15

VESTIL Beam Clamps DIMENSIONS (in.)

Item # Beam Flange Width Capacity (tons) Weight (lbs.)
A
BC-2 1 18
BC-4 2-1/2 - 8-1/2 2 20
BC-6 2-1/2 - 8-1/2 3 28
BC-8 4-1/2 - 8-1/2 4 40
4-1/2 - 8-1/2

90

Air Tuggers

877.446.4352 www.superiortoolrental.com www.midlandtool.com 91

Air Tuggers

1,100 lb. Short Drum Tugger 2,500 lb. Short Drum Tuggger 2,500 lb. Long Drum Tuggger
with Manual Brake with Auto Brake with Auto Brake

3,000 lb. Long Drum Tugger 4,000 lb. Long Drum Tuggger 5,000 lb. Short Drum Tuggger
with Manual Brake with Auto Brake with Auto Brake

6,600 lb. Long Drum Tugger 10,000 lb. Long Drum Tuggger 11,000 lb. Long Drum Tuggger
with Auto Brake with Manual Brake with Auto Brake

22,000 lb. Long Drum Tuggger DIMENSIONS (in.)
with Auto Brake
Item # Drum A BC D Air Inlet E Exhaust F
ALL TUGGERS ARE
EQUIPPED WITH 1,100 Lb. Short 21.10 4.49 12.68 Pipe Tap Pipe Tap 9.6
SAFETY GUARDS 2,500 Lb. Short 18-1/4
2,500 Lb. Long 32-7/8 7-1/8 22-5/16 3/4 3-4 18-1/4
3,000 Lb. Long 1-1/4 1-1/2 18-1/4
4,000 Lb. Long 40-15/16 15-3/16 30-3/8 1-1/4 1-1/2 23.35
5,000 Lb. Short 1-1/4 1-1/2 21.3/4
6,600 Lb. Long 40-15/16 15-3/16 30-3/8 1-1/2 28.62
10,000 Lb. Long 1 1-1/2 25.98
11,000 Lb. Long 40.55 14.02 28.03 1-1/4 1-1/2 34.72
22,000 Lb. Long 1-1/4 1-1/2 41.34
39 10 25-3/4 1-1/4 1-1/2
1-1/4 1-1/2 min
50.43 18.19 30.32 1-1/4

58.1/2 24 31.04

57.44 23.62 40.99

74.92 10 19.69

13/16" 4 Holes

92

Air Tuggers

SPECIFICATIONS (AT HALF DRUM)

Capacity Drum Line Speed Cable Capacity Weight w/o Rope Air Inlet Thread Hose Size Avg. Air
at Capacity (in.) (lbs.) (in.) (in.) Consumption

1,100 lbs. Short 62 ft./min. 213' of 1/4" 97 3/4 1 @ 90 psi
147' of 5/16" 71 cfm
175 cfm
2,500 lbs. Short 150 ft./min. 737' of 3/8" 490 11
411' of 1/2" 175 cfm
253' of 5/8" 191 cfm
191 cfm
2,500 lbs. Long 150 ft./min. 1,520' of 3/8" 562 1 1
852' of 1/2" 598 1-1/4 1 420 cfm
524' of 5/8" 654 1 318 cfm
890 1 600 cfm
3,000 lbs. Long 150 ft./min. 1,445' of 3/8" 1,161 318 cfm
813' of 1/2" 1,550
1,923 600 cfm
4,400 lbs. Long 62 ft./min. 952' of 7/16" 5,071
768' of 1/2"
5,000 lbs. Long 115 ft./min. 851' of 7/16" 1-1/4 1-1/2
715' of 1/2"
457' of 5/8" 1-1/4 1-1/2
1-1/4 1-1/2
6,600 lbs. Long 62 ft./min. 1,050' of 5/8" 1-1/4 1-1/2

10,000 lbs. Long 55 ft./min. 820' of 3/4"
755' of 7/8"

11,000 lbs. Long 36 ft./min. 820' of 3/4"
755' of 7/8"
22,000 lbs. Long 27.9 ft./min. 2 1-1/2 min
1,460' of 7/8"
1455' of 1"

904' of 1-1/8"
700' of 1-1/4"

AIR TUGGER ACCESSORIES

Overhaul Ball Assembly Split Overhaul Balls

UB500 Working Weight UB500 Working Weight • Attaches easily to Wire Rope.
“E” Load Limit Each “E” Load Limit Each
(lbs.) (lbs.) SPECIFICATIONS
Eye Hook (tons) Eye Hook (tons)
Item # 58 Item # 216 Item # Wire Rope Weight Ball
4 102 12 258 Sizes Each Dia.
1036000* 4 162 1036144* 12 365 (lbs.) (in.) 5.06
1036009* 4 201 1036153* 12 403 (in.) 5.38
1036027* 4 109 1036171* 12 718 7.12
1036036* 7 170 1036180* 12 298 9.19
1036045* 7 210 1036189* 15 456
1036054* 7 321 1036198* 15 753
1036072* 7 216 1036207* 15 1311
1036081* 10 260 1036216* 15 298
1036090* 10 365 1036225* 20 456
1036099* 10 403 1036234* 20 753
1036117* 10 718 1036243* 20 1311
1036126* 10 1036252* 20 533
1036135* 1036261* 25 865
1036270* 25 1421
* Utilizes Crosby “N” style hooks with integrated latch. Replacement 1036279* 25 865 2003822 1/4 - 5/16 15
latch kit is S-4055 latch will not fit. Standard Crosby S-5 Thrust style 1036288* 30 1421 2003830 3/8 20
swivels can not be used with UB500 Overhaul Balls For replacement 1036297* 30 2003831 50
swivels, contact Crosby Customer Service. 1036306* 2003832 1/2 - 5/8 100
5/8 - 3/4 - 7/8

Minimum breaking force of standard wire rope used on Superior’s pneumatic tuggers.

6 x 19 IWRC (XIP) Strength and Weights Chart

Diameter Weight Minimum Diameter Weight Minimum Diameter Weight Minimum
(in.) (lb/ft) Breaking Force (in.) (lb/ft) Breaking Force (in.) (lb/ft) Breaking Force

(lbs.) 0.72 (lbs.) 1-3/8 3.50 (lbs.)
1.04 1-1/2 4.16
1/4 0.116 6,800 5/8 1.42 41,200 1-5/8 4.88 192,000
5/16 0.18 10,540 3/4 1.85 58,800 1-3/4 5.67 228,000
3/8 0.26 15,540 7/8 2.34 79,600 1-7/8 6.50 264,400
7/16 0.35 20,400 2.89 103,400 7.39 306,000
1/2 0.46 26,600 1 130,000 2 348,000
9/16 0.59 33,600 1-1/8 159,800 396,000
1-1/4

877.446.4352 www.superiortoolrental.com www.midlandtool.com 93

Electric Winches

1,000 LB Standard Electric Winch-Hoist 100AB SIDE VIEW
FRONT VIEW
FEATURES 5/16"
150' TOP VIEW
• 1,100-lb single-line or 2,000-lb double-line lift
• Trifecta system 115 volt brake motor with SIDE VIEW
FRONT VIEW
triple brake system for instant stopping
• Worm gear reduction for positive load holding TOP VIEW
• Rugged construction
• Low voltage 10’ pendant control
• High-capacity cable drum
• Friction-less bearings
• 1,000 lb. single-line or 2,000 lb. double-line lift

DRUM STORAGE SPECIFICATIONS

Item # 100AB
Drum Storage
Weight 1/8" 3/16" 1/4"
1,000'
450' 250'

76 lbs

POWER

Universal 18,500 RPM reversible 1.25 HP bra motor (no-load speed)

15' power cord plugs into any 115 Volt AC grounded outlet

6 amp No load

14 amp Full load

LIFTING CAPACITY

1,000 lbs 1-2 layers of cable (39' of 1/4" cable)
850 lbs 3 layers of cable (65' of 1/4" cable)
600 lbs Full drum of cable (250' of 1/4" cable)

3,000 LB Max Electric Winch-Hoist AC36B

FEATURES

• 3,000-lb single-line or 6,000-lb double-line lift
• Trifecta system 115 volt brake motor with

triple brake system for instant stopping
• Worm gear reduction for positive load holding
• Compact, heavy-duty construction
• Low voltage 10’ pendant control
• Full power reversible
• Cable tensioner for better cable tracking
• 3,000 lb. single-line or 6,000 lb. double-line lift

DRUM STORAGE SPECIFICATIONS

Item # 100AB

Drum Storage 1/4" 5/16" 3/8"
250' 160' 110'

Weight 132 lbs

POWER

Universal 18,500 RPM reversible 1.25 HP brake motor (no-load speed)

15' power cord plugs into any 115 Volt AC grounded outlet

6 amp No load

14 amp Full load

LIFTING CAPACITY

3,000 lbs 1-2 layers of cable (54' of 5/16" cable)
2,650 lbs 3 layers of cable (100' of 5/16" cable)
2,150 lbs Full drum of cable (160' of 5/16" cable)

9482

Tirfor® 8,000 LB Grip Hoist & ElectricMHaonisutasl

FEATURES TU-32

• Works in any position, horizontal, vertical or angled
• Unlimited length of wire rope

SIMPLE

• Fast and easy installation and use
• Simple to install or remove the wire rope
• Continuous operation without jerking
• Changeover from forward to reverse operation by

transferring the operating handle from one lever to another

SPECIFICATIONS

Item # TU-32

Normal Capacity Material handling: 8,000, Manriging: 6,000

Machine Weight 59.5 lbs.

Machine Dimensions L27" x W13" x D6-1/8"

Handle Ext./closed 45" / 26"

Wire Rope Diameter 5/8"

Min. W.R. Breaking Strain 40,000 lbs.

Portable Electric Hoist

FEATURES

• Portable and powerful for unlimited
heights of lift

• Pendant control

SPECIFICATIONS

Item # TR50
71 lbs.
Weight Without Wire Rope 1,000
2,000
WLL lbs Direct
Sheaved 23
11.5
Speed RPM Direct 115 V
Sheaved L19" W9" D17"

Power Supply TR50

Dimensions

Blocstop® Safety Device for Wire Rope

FEATURES

• Mounted on a separate safety wire rope if required by safety regulation
for suspended scaffolding and platforms. The Blocstop® holds the load
safely should there be any defect in the suspension wire rope or
malfunction of the lifting machine.

• Mounted on the suspension or tensioned wire rope, the Blocstop®
protects the load against malfunction of the lifting / tensioning device.

SPECIFICATIONS BS 35.30 BS 35.30
Item # 6,000 lbs www.midlandtool.com
Capacity
Weight 20 lbs.
Wire Rope Diameter 5/8"

877.446.4352 Direcwt ww.superio2r3toolrental.com 95

Snatch Blocks, Swivels, Wedge Sockets

4 TON 8 TON 8 TON 12 TON 12 TON

15 TON 20 TON 20 TON

96

Snatch Blocks

419 Snatch Blocks with Shackle

Sheave Bearing Item # Wire Rope Working Load Sheave Bearing Item # Wire Rope Working Load
Dia. Code 419 with Size Limit Dia. Code 419 with Size Limit
(in.) Shackle (in.) (ton)* (in.) Shackle (in.) (ton)*
**3 BB 109091 5/16 - 3/8 2 14 BB 169356 5/8 8
**3 BB 109037• 5/16 - 3/8 2 14 RB 167857 5/8 8
BB 109064 3/8 - 1/2 4 14 BB 109527 3/4 8
**4-1/2 BB 109126 5/8 - 3/4 8 14 RB 109545 3/4 8
6 RB 109153 5/8 - 3/4 8 16 BB 203041 3/4 15
6 BB 109224 5/8 - 3/4 8 16 RB 203087 3/4 15
8 RB 109251 5/8 - 3/4 8 16 BB 109607 7/8 15
* Ultimate Load is 4 times the Working 8 BB 109322 5/8 - 3/4 8 16 RB 109625 7/8 15
Load Limit. 10 RB 109359 5/8 - 3/4 8 18 BB 203130 7/8 15
10 BB 202961 5/8 8 18 RB 203176 7/8 15
** Available in Bronze Brushed only. 12 RB 169347 5/8 8 18 BB 109643 1 15
3" and 4-1/2" have self 12 BB 109420 3/4 8 18 RB 109661 1 15
lubricating Bronze Bushing. 12 RB 109457 3/4 8
12
• Fitted with 1-1/4” ID Swivel Eye.
Bearing Code: RB = Roller Bearing

BB = Bronze Bearing

421 Snatch Blocks with Shackle

Sheave Dia. Bearing Code Item # 421 with Shackle Wire Rope Size Working Load Limit
(in.) (in.) (ton)*
6 BB 169481 12
6 RB 204120 3/4 - 7/8 12
8 BB 169515 3/4 - 7/8 15
8 RB 204193 3/4 - 7/8 15
10 BB 110720 3/4 - 7/8 15
10 RB 110757 3/4 - 7/8 15
3/4 - 7/8

* Ultimate Load is 4 times the Working Load Limit. Bearing Code: RB = Roller Bearing BB = Bronze Bearing

431 Snatch Blocks with Shackle

Sheave Bearing Item # Wire Rope Working Sheave Bearing Item # Wire Rope Working
Dia. Code 431 with Size Load Limit Dia. Code 431 with Size Load Limit
(in.) Shackle (in.) (ton)* 18 BB Shackle (in.)
18 RB 209410 1 (ton)*
8 BB 121022 1- 1-1/8 20 18 BB 249465 1 25
8 RB 121040 1- 1-1/8 20 18 RB 119561 1-1/8 25
10 BB 121095 1- 1-1/8 20 20 BB 119570 1-1/8 25
10 RB 121111 1- 1-1/8 20 20 RB 209483 1-1/8 25
12 BB 169917 1 20 20 BB 169864 1-1/8 30
12 RB 209303 1 20 20 RB 119589 1-1/4 30
12 BB 121175 1-1/8 20 24 BB 119598 1-1/4 30
12 RB 121193 1-1/8 20 24 RB 209526 1-1/8 30
* Ultimate Load is 4 times the Working 14 BB 209321 1 20 24 BB 209553 1-1/8 30
14 RB 170424 1 20 24 RB 119605 1-1/4 30
Load Limit. 14 BB 121255 1-1/8 20 119614 1-1/4 30
Bearing Code: RB = Roller Bearing 14 RB 121273 1-1/8 20 30

BB = Bronze Bearing

Snatch Blocks – Double Sheave

409 Double Sheave with Shackle Double Sheave with Shackle

Sheave Bearing Item # Wire Rope Working Sheave Item # Wire Rope Working
Diameter Code 409 with Size Load Limit Dia. Size Load Limit
(in.) Shackle (in.) (ton) (in.) (in.)
(ton)

•4-1/2 BB 105022 3/8 - 1/2 4 15 MT
6 BB 105102 5/8 - 3/4 12 6 DB 15D 6BS 5/8 - 3/4 15
6 RB 105120 5/8 - 3/4 12 6 DB 15D 6RS 5/8 - 3/4 15
8 BB 105184 5/8 - 3/4 12 8 DB 15D 8BS 3/4 - 7/8 15
8 RB 105200 5/8 - 3/4 12 8 DB 15D 8RS 3/4 - 7/8 15
10 BB 105264 5/8 - 3/4 12 10 DB 15D 10BS 3/4 - 7/8 15
10 RB 105282 5/8 - 3/4 12 10 DB 15D 10RS 3/4 - 7/8 15
12 BB 195185 5/8 12 12 DB 15D 12BS 3/4 - 7/8 15
12 RB 195229 5/8 12 12 DB 15D 12RS 3/4 - 7/8 15
12 BB 105344 3/4 12 14 DB 15D 14BS 3/4 - 7/8 15
12 RB 105362 3/4 12 14 DB 15D 14RS 3/4 - 7/8 15
14 BB 195247 5/8 12
14 RB 195265 5/8 12 20 MT
14 12
14 BB 105424 3/4 12 8 DB 20D 8BS 1 – 1-1/8 20
RB 105442 3/4 8 DB 20D 8RS 1 – 1-1/8 20
10 DB 20D 10BS 1 – 1-1/8 20
• Available in Bronze Brushed only 10 DB 20D 10RS 1 – 1-1/8 20
Bearing Code: RB = Roller Bearing 12 DB 20D 12BS 1 – 1-1/8 20
12 DB 20D 12RS 1 – 1-1/8 20
BB = Bronze Bearing 14 DB 20D 14BS 1 – 1-1/8 20
14 DB 20D 14RS 1 – 1-1/8 20

877.446.4352 www.superiortoolrental.com www.midlandtool.com 97

Swivels

FEATURES IMPORTANT - Crosby Swivels should
only be used with the recommended
• Equipped with tapered roller thrust bearing wire rope.
• Suitable for frequent rotation under load Contact the wire rope manufacturer
• All swivels individually proof tested with certification for the proper wire rope to be used
• All Hooks furnished with latches assembled with Crosby Swivels.
• All jaws complete with bolts, nuts and cotter pins
• Pressure lube fitting provided
• NOT TO BE USED ON DEMOLITION (WRECKING) BALLS

S-1 Jaw & Hook RWSoiizpreee
(in.)
Swivel SSto-c1k Working Weight DIMENSIONS (in.)
No. No. Load Each
L(itm*)it (lbs.) A F GH J K L M N O PV

3-S-1 297011 3 1/2 9.81 11.44 4.84 2.75 .75 .88 1.62 1.53 1.41 1.31 1.00 1.44 1.12
5/8 15.51 13.34 6.28 3.00 .88 1.00 2.25 1.94 1.62 1.12 1.00 1.81 1.44
5-S-1 297217 5 3/4 29.42 16.45 7.54 4.00 1.00 1.56 2.81 2.46 2.22 2.12 1.38 2.25 1.62
7/8 46.75 19.75 8.34 4.50 1.50 1.75 3.38 2.59 2.41 3.50 1.75 2.59 1.94
8-S-1 297413 8-1/2 73.75 22.24 10.34 5.00 1.50 1.75 3.38 2.81 3.19 3.50 1.75 3.00 2.38
1 140.00 26.78 13.62 6.00 2.00 2.00 4.62 3.44 3.62 3.69 2.38 3.66 3.00
10-S-1 297618 10 - 220.00 29.94 14.06 6.50 2.00 2.00 4.62 3.88 3.75 3.69 2.38 4.56 3.19
- 251.00 35.06 15.44 7.00 2.25 2.50 5.00 4.75 4.25 4.00 3.00 5.06 3.25
15-S-1 297814 15 -

25-S-1 298118 25

35-S-1 298216 35

45-S-1 298314 45

S-2 Jaw & Jaw Wire
Rope
Swivel S-2 WLLooirmkaiidnt g Size Weight DIMENSIONS (in.)
No. Stock (t)* (in.) Each
(lbs.) B G H J K N O
No. 1/2
5/8 9.63 9.28 2.75 .75 .88 1.62 1.31 1.00
3-S-2 297020 3 3/4 13.69 10.31 3.00 .88 1.00 2.25 1.62 1.12
5-S-2 297226 5 7/8 26.16 12.62 4.00 1.00 1.56 2.81 2.12 1.38
8-S-2 297422 8-1/2 45.75 16.75 4.50 1.50 1.75 3.38 3.50 1.75
10-S-2 297627 10 1 62.75 17.12 5.00 1.50 1.75 3.38 3.50 1.75
15-S-2 297823 15 - 140.00 20.75 6.00 2.00 2.00 4.62 3.69 2.38
25-S-2 298127 25 - 155.00 20.75 6.50 2.00 2.00 4.62 3.69 2.38
35-S-2 298225 35 - 235.00 25.25 7.00 2.25 2.50 5.00 4.00 3.00
45-S-2 298323 45

S-3 Jaw & Eye Wire
Rope
Swivel S-3 LWoaodrkLiinmgit S(iinz.e) Weight DIMENSIONS (in.)
No. SNtooc.k (t)* Each
(lbs.) C G H J K N O Q R S T
3-S-3
5-S-3 297039 3 1/2 9.12 9.34 2.75 .75 .88 1.62 1.31 1.00 .75 1.03 1.12 1.25
8-S-3 297235 5 5/8 13.50 10.06 3.00 .88 1.00 2.25 1.62 1.12 1.00 1.28 1.25 1.25
10-S-3 297431 8-1/2 3/4 24.90 12.25 4.00 1.00 1.56 2.81 2.12 1.38 1.25 1.41 1.62 1.50
15-S-3 297636 10 7/8 43.50 16.12 4.50 1.50 1.75 3.38 3.50 1.75 1.69 1.69 2.75 1.88
25-S-3 297832 15 61.00 16.75 5.00 1.50 1.75 3.38 3.50 1.75 1.94 2.03 2.75 2.12
35-S-3 298136 25 1 135.00 21.50 6.00 2.00 2.00 4.62 3.69 2.38 2.25 2.31 3.88 2.38
45-S-3 298234 35 - 150.00 21.50 6.50 2.00 2.00 4.62 3.69 2.38 2.25 2.31 3.88 2.38
298332 45 - 225.00 25.88 7.00 2.25 2.50 5.00 4.00 3.00 2.50 2.53 4.00 3.00
-

S-4 Eye & Jaw

Swivel SSto-c4k Working RWSoiizpreee Weight DIMENSIONS (in.)
No. Load Limit (in.) Each
No. (t*) (lbs.) C G H J K N O Q R S T
3-S-4
5-S-4 297048 3 1/2 9.00 9.34 2.75 .75 .88 1.62 1.31 1.00 .75 1.03 1.12 1.25
8-S-4 297244 5 10.06 3.00 .88 1.00 2.25 1.62 1.12 1.00 1.28 1.25 1.25
10-S-4 297440 8-1/2 5/8 12.33 12.25 4.00 1.00 1.56 2.81 2.12 1.38 1.25 1.41 1.62 1.50
15-S-4 297645 10 16.12 4.50 1.50 1.75 3.38 3.50 1.75 1.69 1.69 2.75 1.88
25-S-4 297841 15 3/4 29.00 16.75 5.00 1.50 1.75 3.38 3.50 1.75 1.94 2.03 2.75 2.12
35-S-4 298145 25 21.50 6.00 2.00 2.00 4.62 3.69 2.38 2.25 2.31 3.88 2.38
45-S-4 298243 35 7/8 44.00 21.50 6.50 2.00 2.00 4.62 3.69 2.38 2.25 2.31 3.88 2.38
298341 45 25.88 7.00 2.25 2.50 5.00 4.00 3.00 2.50 2.53 4.00 3.00
1 61.00

- 135.00

- 150.00

- 225.00

S-5 Eye & Eye

Swivel S-5 LWoaod(rtk*L)iinmgit Wire Weight DIMENSIONS (in.)
No. Stock Rope Each
Size (lbs.) D G Q R S T
No. (in.)
9.41 2.75 .75 1.03 1.12 1.25
3-S-5 297057 3 1/2 8.50 9.81 3.00 1.00 1.28 1.25 1.25
5-S-5 297253 5 5/8 11.30 11.88 4.00 1.25 1.41 1.62 1.50
8-S-5 297459 8-1/2 3/4 29.25 15.50 4.50 1.69 1.69 2.75 1.88
10-S-5 297654 10 7/8 42.00 16.38 5.00 1.94 2.03 2.75 2.12
15-S-5 297850 15 49.00 22.25 6.00 2.25 2.31 3.88 2.38
25-S-5 298154 25 1 130.00 22.25 6.50 2.25 2.31 3.88 2.38
35-S-5 298252 35 - 145.00 26.50 7.00 2.50 2.53 4.00 3.00
45-S-5 298350 45 - 215.00
-

S-6 Eye & Hook

Swivel S-6 Working Wire Weight E F DIMENSIONS (in.) S T V
No. Stock Load Limit Rope Each
S(iinz.e) (lbs.) GL M PQR 1.12 1.25 1.12
No. (t*) 1.25 1.25 1.44
1.62 1.50 1.62
3-S-6 297066 3 1/2 9.32 11.50 4.84 2.75 1.53 1.41 1.44 .75 1.03 2.75 1.88 1.94
5-S-6 297262 5 5/8 14.24 13.09 6.28 3.00 1.94 1.69 1.81 1.00 1.28 2.75 2.12 2.38
8-S-6 297468 8-1/2 3/4 32.00 16.07 7.54 4.00 2.46 2.22 2.25 1.25 1.41 3.88 2.38 3.00
10-S-6 297663 10 7/8 45.50 19.12 8.34 4.50 2.59 2.41 2.59 1.69 1.69 3.88 2.38 3.19
15-S-6 297869 15 68.00 21.24 10.34 5.00 2.81 3.19 3.00 1.94 2.03 4.00 3.00 3.25
25-S-6 298163 25 1 135.00 27.53 13.62 6.00 3.44 3.62 3.66 2.25 2.31
35-S-6 298261 35 - 215.00 30.69 14.06 6.50 3.88 3.75 4.56 2.25 2.31
45-S-6 298369 45 - 270.00 35.69 15.44 7.00 4.75 4.25 5.06 2.50 2.53
-

* Individually Proof Tested to 2 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.

98

ABnegaurlianrg CSownivtaelcst

FEATURES AS-20 Thimble Insert

• Wide range of product available. • When terminating with wire rope clips,
• Capacity: 0.45 through 35 tons we recommend the use of the Thimble Insert.
• Wire Rope Sizes: 1/8" through 1-1/2" The result will be extended wire rope life.

• Individually Proof Tested to 2 times the • Allows standard swivel to be used in
Working Load Limit with certification. application requiring a thimble fitting.

• Design Factor of 5 to 1. • For use with our Bullet Style (AS-7) and
• Entire swivel is Zinc plated to resist Jaw Style (AS-1, AS-2, AS-3 & AS-4) swivels.

corrosion. • Machined from carbon steel. Zinc plated.
• Angular contact bearings maximize efficiency,
Wire Rope Size AS-20
reliability and service life of swivel and extend the
life of the wire rope. 1/2" 1038200
• Designed for high rotation speed: Lower torque 5/8" 1038209
required to initiate rotation. 3/4" 1038218
• Hook models utilize genuine Crosby hooks which 7/8" 1038227
are forged alloy steel, Quenched and Tempered 1-1/8" - 1-1/4" 1038236
and contain patented QUIC-CHECK® markings. 1-1/2" 1038245
• Each swivel, 8.5 tons and larger is furnished with a
pressure lubrication fitting.

AS-1 Jaw & Hook
RWS(ioinizpr.ee)e
Working AS-1 Weight DIMENSIONS (in.) Deformation ReSLptaolatccckheNmKoiet.nt
Load Stock Each Indicator
Limit (lbs.) A B C DE F GH I AA
(tons*) No.
.88 .25 .73
.45 1/8 1016001 .7 1.31 .38 .25 .38 .41 4.32 2.86 .93 .84 1.50 1096325
1.63 .50 .31 .44 .56 5.44 3.16 .97 1.14 1.50 1096374
.75 1/4 1016010 1.5 2.00 .75 .50 .69 .78 6.35 4.00 1.16 1.44 1.50 1096374
2.50 .88 .75 .94 1.19 8.69 4.84 1.41 1.82 2.50 1096374
1.5 3/8 1016025 2.3 3.00 1.19 1.00 1.13 1.53 10.71 6.28 1.69 2.60 3.00 1096562
4.00 1.50 1.56 1.34 2.09 13.65 8.34 2.41 3.00 4.00 1096657
3.0 1/2 1016026 6.5 4.00 1.50 1.75 1.75 3.50 17.95 10.34 3.19 3.00 5.00 1096704
5.00 2.00 1.75 1.75 3.50 17.95 10.34 3.19 3.62 5.00 1096704
5.0 5/8 1016040 12.9 5.00 2.00 2.00 2.38 3.69 20.88 13.62 3.25 4.56 6.50 1090161
2.00 2.38 3.69 24.00 14.06 3.00 7.00 1090189
8.5 3/4 1016045 26.4

10 7/8 1016056 53.0

15 1 1016064 53.0

25 1-1/4 1016075 97.0

35 1-1/2 1016082 140.0

AS-2 Jaw & Jaw

Working Wire AS-2 Weight DIMENSIONS (in.)
Load Rope Stock Each
Limit Size (lbs.) A B C D E F G H
(tons*) (in.) No.
.4 .88 2.38 3.13 .38 .25 .25 .19 .41
.45 1/8 1016103 .9 1.31 3.56 4.44 .44 .31 .38 .22 .56
.75 1/4 1016114 2.0 1.63 4.06 5.44 .69 .50 .50 .28 .78
1.5 3/8 1016122 4.9 2.00 6.25 8.13 .94 .75 .75 .38 1.19
3.0 1/2 1016131 9.6 2.50 7.75 10.63 1.13 1.00 .88 .53 1.53
5.0 5/8 1016139 15.8 3.00 9.63 12.31 1.34 1.56 1.19 .56 2.09
8.5 3/4 1016148 40.0 4.00 14.00 17.50 1.75 1.75 1.50 .81 3.50
10 7/8 1016157 40.0 4.00 14.00 17.50 1.75 1.75 1.50 .81 3.50
15 1 1016166 78.0 5.00 15.94 20.69 2.38 2.00 2.00 1.13 3.69
25 1-1/4 1016175 78.0 5.00 15.94 20.69 2.38 2.00 2.00 1.13 3.69
35 1-1/2 1016184

AS-3 Jaw & Eye
RWS(ioinizpr.ee)e
Working AS-3 Weight DIMENSIONS (in.)
Load Stock Each
(tLoimnsit*) (lbs.) A BC D E F G H I J K L
No.
.3 .88 2.50 3.25 .25 .19 .25 .38 .41 .25 .25 .38 .84
.45 1/8 1016205 .9 1.31 3.69 4.56 .31 .22 .38 .44 .56 .31 .38 .44 .88
1.9 1.63 4.19 5.44 .50 .28 .50 .69 .78 .50 .66 .63 1.38
.75 1/4 1016216 4.6 2.00 6.19 8.13 .75 .38 .75 .94 1.19 .75 .91 1.00 2.00
9.1 2.50 7.88 10.19 1.00 .53 .88 1.13 1.50 1.00 1.25 1.19 2.63
1.5 3/8 1016224 15.6 3.00 9.50 12.25 1.56 .56 1.25 1.34 2.09 1.25 1.41 1.50 3.13
39.0 4.00 13.75 17.31 1.75 .81 1.50 1.75 3.50 1.72 1.63 1.81 4.69
3.0 1/2 1016232 40.0 4.00 13.44 17.31 1.75 .81 1.50 1.75 3.50 2.00 2.00 2.13 4.69
78.0 5.00 16.00 20.75 2.00 1.13 2.00 2.38 3.69 2.25 2.31 2.38 5.25
5.0 5/8 1016243 78.0 5.00 16.00 20.75 2.00 1.13 2.00 2.38 3.69 2.25 2.31 2.38 5.2

8.5 3/4 1016250 I J K L

10 7/8 1016259 .25 .25 .38 .81
.31 .38 .44 .88
15 1 1016268 .50 .66 .63 1.34
.75 .91 1.00 2.00
25 1-1/4 1016277 1.00 1.25 1.19 2.63
1.25 1.41 1.50 3.13
35 1-1/2 1016286 1.72 1.66 1.81 4.69
2.00 2.03 2.13 4.69
AS-4 Eye & Jaw 2.25 2.31 2.38 5.25
2.25 2.31 2.38 5.25
Working RWSoiizpreee AS-4 Weight A B C D DIMENSIONS (in.)
Load (in.) Stock Each
Limit E F GH
(tons*) No. ()

.45 1/8 1016306 .3 .88 2.50 3.25 .25 .19 .25 .38 .41
1.31 3.63 4.56 .31 .22 .38 .44 .56
.75 1/4 1016314 .9 1.63 4.19 5.50 .50 .28 .50 .69 .78
2.00 6.19 8.13 .75 .38 .75 .94 1.19
1.5 3/8 1016325 1.9 2.50 7.88 10.19 1.00 .53 .88 1.13 1.44
3.00 9.44 12.25 1.56 .56 1.19 1.34 2.09
3.0 1/2 1016332 4.6 4.00 14.13 17.75 1.75 .81 1.50 1.75 3.50
4.00 13.81 17.75 1.75 .81 1.50 1.75 3.50
5.0 5/8 1016343 9.1 5.00 15.94 20.75 2.00 1.13 2.00 2.38 3.69
5.00 15.94 20.75 2.00 1.13 2.00 2.38 3.69
8.5 3/4 1016352 15.7

10 7/8 1016361 39.0

15 1 1016370 40.0

25 1-1/4 1016375 75.0

35 1-1/2 1016379 75.0

* Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit.

877.446.4352 www.superiortoolrental.com www.midlandtool.com 99

ABneagruilnagrSCwoinvetlasct

AS-5 Eye & Eye

Working Wire AS-5 Weight DIMENSIONS (in.)
Load Rope SNtooc.k Each
(tLoimnsit*) S(iinz.e) (lbs.) A B C DE F G

.45 1/8 1016409 .3 .88 2.63 3.38 .38 .25 .25 .81
.75 1/4 1016418 .9 1.31 3.75 4.63 .44 .31 .38 .88
1.5 3/8 1016427 1.8 1.63 4.31 5.56 .63 .50 .66 1.34
3.0 1/2 1016436 4.3 2.00 6.13 8.13 1.00 .75 .91 2.00
5.0 5/8 1016445 8.6 2.50 7.75 10.63 1.19 1.00 1.25 2.63
8.5 3/4 1016454 15.4 3.00 9.31 12.31 1.50 1.25 1.41 3.13
10 7/8 1016463 37.0 4.00 13.88 17.50 1.81 1.72 1.63 4.69
15 1 1016472 39.0 4.00 13.25 17.50 2.13 2.00 2.13 4.69
25 1-1/4 1016481 72.0 5.00 16.00 20.75 2.38 2.25 2.31 5.25
35 1-1/2 1016490 72.0 5.00 18.00 20.75 2.38 2.25 2.31 5.25

AS-6 Eye & Hook

Working RWoipree AS-6 Weight DIMENSIONS (in.) Deformation Replacement
Load Size Stock Each Indicator Latch Kit
(tLoimnsit*) (in.) (lbs.) A B C D E F G H AA Stock No.
No.
.88 4.36 2.86 .93 .25 .25 .73 .93 1.50 1096325
.45 1/8 1016502 .7 1.31 5.56 3.16 .97 .38 .31 .84 .97 1.50 1096374
1.63 6.22 4.00 1.16 .66 .50 1.14 1.16 1.50 1096374
.75 1/4 1016513 1.5 2.00 8.63 4.84 1.41 .91 .75 1.44 1.41 2.50 1096374
2.50 10.77 6.28 1.69 1.25 1.00 1.82 1.69 3.00 1096562
1.5 3/8 1016520 2.9 3.00 13.52 8.34 2.41 1.40 1.25 2.60 2.41 4.00 1096657
4.00 18.08 10.34 3.19 1.66 1.72 3.00 3.19 5.00 1096704
3.0 1/2 1016529 6.2 4.00 17.64 10.34 3.19 2.03 2.00 3.00 3.19 5.00 1096704
5.00 20.88 13.62 2.25 2.34 2.25 3.62 3.25 6.50 1090161
5.0 5/8 1016538 12.4 5.00 24.00 14.06 3.00 2.34 2.25 4.56 3.00 7.00 1090189

8.5 3/4 1016547 23.5

10 7/8 1016556 52.0

15 1 1016565 53.0

25 1-1/4 1016574 94.0

35 1-1/2 1016583 138.0

AS-7 Bullet Style Jaw & Jaw

Working Wire AS-7 Weight DIMENSIONS (in.)
Load Rope Stock Each
Limit Size (lbs.) A B C D E F G
(tons*) (in.) No.
2.38 3.13 .38 .25 .31 .40
.45 1/8 1016604 .4 .88 3.56 4.44 .44 .31 .38 .56
1.31 4.06 5.19 .56 .50 .44 .81
.75 1/4 1016611 1.1 1.63 5.44 7.06 .81 .75 .63 .94
2.00 7.75 10.06 1.13 1.00 .88 1.56
1.5 3/8 1016622 1.8 2.50 9.88 12.38 1.25 1.31 1.00 2.13
3.00 13.13 16.75 1.75 1.75 1.50 3.25
3.0 1/2 1016631 3.8 4.00 13.13 16.75 1.75 1.75 1.50 3.25
4.00 15.94 20.75 2.38 2.00 2.00 3.69
5.0 5/8 1016640 8.0 5.00 15.94 20.75 2.38 2.00 2.00 3.69
5.00
8.5 3/4 1016649 14.5

10 7/8 1016652 40.0

15 1 1016658 40.0

25 1-1/4 1016662 84.0

35 1-1/2 1016667 84.0

AS-11 Thimble & Jaw
Working
Load Wire AS-11 Weight DIMENSIONS (in.)
Limit Rope Stock Each
(tons*) S(iinz.e) (lbs.) A B C D E F G
No.
3.00 8.66 13.00 1.34 1.56 1.19 2.09
8.5 3/4 1017020 18.0 4.00 11.66 17.53 1.75 1.78 1.50 3.50

15 1 1017029 42.0

AS-14 Thimble & Bullet

WLoorkaidng RWSoiizpreee ASSto-c1k4 Weight DIMENSIONS (in.)
Limit (in.) No. Each
(tons*) (lbs.) A B C D E F G

8.5 3/4 1017225 20.0 3.00 9.00 13.25 1.25 1.31 1.00 2.13
4.00 11.50 17.38 1.75 1.75 1.50 3.25
15 1 1017258 40.0 4.00 14.31 21.19 2.38 2.00 2.00 3.69

25 1-1/4 1017261 81.0

AS-17 Bullet Style Jaw & Jaw Slurry Swivel

Working Wire AS-17 Weight DIMENSIONS (in.)
(tLLooimnasdit*) Rope Stock Each
Size (lbs.) A BC DE F G
(in.) No.

8.5 3/4 8013342 14.5 3.00 10.13 12.63 1.25 1.31 1.00 2.13

15 1 8013343 40.0 4.00 13.50 17.00 1.75 1.75 1.50 3.25

25 1-1/4 8013376 84.0 5.00 16.16 20.92 2.38 2.00 2.00 3.69

35 1-1/2 8013344 84.0 5.00 16.16 20.92 2.38 2.00 2.00 3.69

45 - 8013585 150.0 6.00 20.25 26.25 3.00 2.53 2.25 2.75

• The Crosby AS-17 Slurry Swivel is a zinc plated Bullet Type Swivel (AS-7), designed with two
rubber lip style seals about the shaft. The threaded cap is sealed with a silicone sealant and
secured with a set screw. The swivels are provided with an Alemite grease fitting for easy lubrication.

* Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit.

100