ACDC FULL MAIN CATALOGUE 2016.compressed

TEST EQUIPMENT

pH/ORP/mV Temperature Meter Pen Type pH Tester pH Meter Kit Combustable Gas
IP57 Detector
Complete
Kit

ORP Probe to be ORP Probe to be
ordered separately ordered separately

Code 7011 MP-103 PH5011A PP201 MS6310

ORP Range -1000 - 1000mV ± 1999mV - - • Easily find gas leaks
Resolution
PH Range 1mV 1mV - - • High sensitivity
Resolution
Compensation pH: 0 - 16 pH: 0 - 14 pH: 0 - 14 pH: 0 - 14 • Warm-up time: 2mins
Calibration pH
Temp Range 0.01pH 0.01pH 0.01pH 0.01pH • Respnse time: 2sec
Resolution ATC: 0 - 90°C ATC: 0 - 100°C ATC: 0 - 100°C MTC: 0 - 100°C Gases Detected
Temp Display 4.00, 7.00, 10.01 4.00, 7.00, 10.00 - 4.00, 7.00, 10.00 • Natural gas • Methane
Kit Includes 0 - 90°C 0 - 100°C - - • Ethane • Propane
0.1°C 0.1°C - - • Butane • Acetone
Accessories °F / °C - max/min reading hold °F / °C - - • Alcohol • Ammonia
• Steam • Gasoline
• Carry Case • Carry Case •Electrode Holder • Carry Case • Carry Case • Jet Fuel • Hydrogen
• Meter Solution 4&7 • Meter Solution 4&7 • Screwdriver • pH Electrode • Carbon Monoxide
• Soaking Solution • Batteries •Temp Probe • Battery • Meter Solution 4&7
• Batteries • pH Electrode • Buffer solution • Batteries • Distilled water

• PH Probe: 7000EP4 • ORP Probe: MP-103-ORP • Buffer Solution 4.00 (50cc): B-4 • Buffer Solution 4.00 (50cc): B-4 • Solvents • Lacquer
• Napthta
• ORP Probe: 7000EO • Buffer Solution 4.00 (50cc): B-4 • Buffer Solution 7.00 (50cc): B-7 • Buffer Solution 7.00 (50cc): B-7 • Thinners

• Buffer Solution 4.00 (50cc): B-4 • Buffer Solution 7.00 (50cc): B-7
• Buffer Solution 7.00 (50cc): B-7

mA/V Calibrator Thermocouple 4-20mA Simulator K & J Simulators
Calibrator

Code MS7221 MS7220 603 601K 601J TEST INSTRUMENTS, TOOLS & GENSETS

Voltage Source 0-100mV, 0-10V ± 0.02% Measure and calibrate • Simulator output Range: Range:
Current Source 0-24mA ± 0.015% thermocouples ranges of 4mA, 12mA • 0°C (32°F) • 0°C (32°F)
Loop Power 24VDC J,K,T,E,R,S,B,N & 20mA from • 100°C (212°F) • 100°C (212°F)
DCV Measure 0-100mV, 0-10V ± 0.02% transmitter • 500°C (932°F) • 200°C (392°F)
DCmA Measure 0-24mA ±0.015% Input/Outputs: • 1000°C (1832°F) • 400°C (752°F)
˗200°C - 1800°C • Ideal for calibration • Accuracy: ±0.5°C (+1°F) • Accuracy: ±0.5°C (+1°F)
Features • Accurately measure ˗328°F - 3272°F standard & used as a • Checking type ­ • Checking type ­
loop currents 10mV - 75mV current source. thermocouples and thermocouples and
• Measure voltage from Resolution: 0.1°C / 0.01mV calibrating process calibrating process
process and PLC's Acurracy: indicators / controllers indicators / controllers
• Source or Simulate ±0.3°C/0.6°F / 0.02%(Mv)
22mA loop currents • Precision source for cali-
• Similtaneous 24V loop brating and mearuring
supply and current thermocouples
measurement

MET 406

TEST EQUIPMENT

Network Test Kit Multi-Network Cable UTP/STP Cable Tester Network Cable Tester Circuit Breaker Identifier
Tester

Cat 5E, Cat 6, BNC
Cable Tester

ETK05D MS6810 KT-200 KT-201 191CBI

5 Piece network test kit • Designed to autoscan the • T est UTP and STP wiring of • Length test range 300m • Easy tool to find the C/B
consists of: wires of Ethernet (BNC/ T568A, T568B, 10Base-T, • Accuracy ±5% or Fuse without
• Carry case TNC),10 Base-T(UTP/STP), 100Base-T and Token ring ­network • Resolution 0.1m disconnecting the supply
• EM415 Wire / Cable tracer AT&T 258A, EIA/TIA568 • 16 x 2 LCD characters
• EM416 Network tester token ring & modular • Tests for open circuits, shorts, • Cable continuity • Plug the transmitter into
(RJ12 or RJ45) cables miswires, reversals, split pairs • S uitable for computer the outlet socket, use the
• BT1 Battery tester for 9 volt and cable’s shield integrity receiver to scan the C/B
• Ratchet crimpers • Auto checks for open network systems
• Punch down tool circuits, shorts, misplaced • D EBUG mode quickly identifies • Warning: Do not use on live • Panel to find the correct
• Batteries included wires & reversals which cable pairs have a ­specific C/B s­ upplying power to
• Shield detection tests shield wiring fault circuits the socket
integrity
• T ester designed for testing • W arning: do not use on live ­circuits
before or after cables have Cable length specifications
been installed • M in UTP/STP cable length for
• Quick & easy fault detecting testing – 1 metre
• Max UTP/STP cable length for
testing – 200 metres

Pen Type Thermometers Professional Wire Tracer Multi-Purpose
Cable Locator Wire Tester

Temperature Temperature
& Humidity Only

TEST INSTRUMENTS, TOOLS & GENSETS Code ST-132 ST-133 MS6818 MS6812 162CB 183CB
Range
Resolution -40 - 250°C / -50 - 300°C • Includes Transmitter & • Designed to identify & • Trace cables within a • Trace cables or wires
Accuracy 10 - 95%RH receiver units. trace wires or cables
Display 0.1°C / 1%RH within a group without group without • Volume Control
Features ± 1.5%/ ± 3.5% damaging the insulation
0.1°C / 0.1°F • Traces cable or conduit in • Continuity test damaging insulation • Voltage free continuity
407 LCD • Volume control for
1°C/ 1°F walls or floor. increased sensitivity • Volume Control and polarity testing
• Auto power off • Recessed ON/OFF b­ utton
• Measures temp LCD • Traces for open or short to prevent battery drain • 50/60Hz filter • Tip & Ring
& humidity
• Sampling Time: cables. Specifications: • Auto Off function Identification
2.0secs Display
• Min/Max Hold • Auto power off • voltage range • Emitter tone frequency: • Flashlight • LED Indication
• Measures temp 1.5kHz
only • Receiver frequency range: • Continuity Tester • Detect AC/DC
• Display in either °C 12VAC-600VAC. 100-300kHz
or °F • Sensitivity of receiver • Polarity Tester Voltages

adjustable. • LED Indication • Test capacitors

• Data Hold • Frequency 1kHz • Test diodes

• Torch built into transmitter • c/w Batteries/Pouch • Frequency 1kHz

• Receiver can connect • c/w Batteries/Pouch
with 2 transmitters with

different codes.

MET

DISPLAY UNITS & CABINETS

Code AC/DC DISPLAY CABINET DISPLAY MASTECH-L DISPLAY MASTECH-S
Description Choice of 3 variations: Large display cabinet containting a Small display cabinet containting a
1 . Hand tools and meters selection of Mastech products selection of Mastech products
Size 2 . Power tools
3 . Combination of 1 & 2 600(W) x 380(D) x 1800(H) 600(W) x 380(D) x 800(H)
1200(W) x 440(D) x 2000(H)

DISTANCE MEASURERS & DETECTORS

Infrared / Ultrasonic Detector & Distance Voltage / Metal / Wood Laser Distance Meter
Distance 5 in 1 Detector Tripod mountable

JT-60 EM60 MVS-168A LM50 LM80 LDM-100 TEST INSTRUMENTS, TOOLS & GENSETS

• Infrared / Ultrasonic • Distance Measurement: Detection: 0.1 - 50M 0.1 - 80M 0.05 - 50M
measuring meter 0.4 - 18 metre 2 x AAA (incl.)
• D esigned for instant and • Accuracy: • Stud - Wood stud 30 x 30mm: 4 x AAA (incl.) 2 x AA (incl.)
accurate distance and approx. 0.5% + 1 digit ≤10mm • Accuracy: ± 1.5mm
acreage measurement • Resolution: 0.01 metre • Metal - Copper pipe dia.15mm: • Accuracy: ± 2mm • Smallest unit displayed:
• Two measuring modes: ≤24mm • Smallest unit displayed: 1mm
receiver alone to max Detection: • AC:90-250VAC @ 50-60Hz: 1mm • Laser Class2
18m (by ultrasonic) and • Stud - Wood stud 30 x 30mm: ≤35mm • Laser Class2 • Battery life: Up to 4000
receiver to target max ≤14mm • Sensitivity can be adjusted • Battery life: single measurements
75m (by infrared/ultrason- • Metal - Iron pipe dia. Up to 10 000 single • Area & Volume
ic) 20mm: ≤25mm • Can be used to accurately measurements calculations
• M emory for 5 measure- • AC: 90-250VAC@50-65Hz: • Pythagoras function for • Pythagoras function for
ments ≤5cm detect the position of pipes, measuring height of an measuring height of an
• Built-in software for field • Calculates area, volume and object object
calibration by user does computation of distance AC voltage and wooden studs • Area and volume • Addition and subtraction
• Size: 160 x 64 x 46mm measurements function
• Battery: 9V included • Battery: 9V included • Addition and subtraction
function
• Reflector plate included

MET 408

WELDING MACHINES

Inverter

Insulation
Class H

IP21

CLUB 150 CLUB 1850 TORNADO 200 PULSAR 305 MIG ONE ONDULIX 140

Code WM-41090 WM-41124 WM-42305 WM-42610 WM-11000 WM-56140
Voltage 1Ph/230V 1Ph 230/400V 1Ph 230/400V 1Ph 230/400V 1Ph 230V 1PH 230V
Absorbed Power 2.6KVA 1.7KVA
Welding Current 50-150A 2.6KVA 3.5KVA 4.7/10KVA 35-95A 2,5kVA
Electrode Ø 1.5-3.25mm 60-150A 50-190A 50-200A 0.8-0.9 wire 5-135A
1.5-4mm 1.5-4mm 1.5-4mm 1.6-3.25mm

All Awelco welding machines supplied with electrode holder and earth clamp.

Inverter Welding Machines

MMA: c/w Cable Sets
ready to use
INMIG: c/w Earth Cable
& MIG torch
Supply Voltage: 230VAC

Code SD-MMA-140 S-MMA-210 S-INMIG-185 S-EVO-150 S-EVO-220

Type MMA MMA MIG MMA MMA
Rated Input Capacity 4.1KW 7.1KW 6.2KVA 4.4KW 7.9KW
Current Adjustment 10 - 140A 10 - 200A 30 - 180A 10 - 125A 20 - 200A
Output Voltage
Rated Duty Cycle 78V 78V 72V 70V 62V
Efficiency 60% @ 140A 60% @ 200A 30% 60% @ 125A 60% @ 190A
Electrode Diameter (mm) 80%
80% 80% N/A 85% 85%
1.6 - 3.2 1.6 - 4.0 1.6 - 3.2 1.6 - 5.0

Wire Cup Brushes Chipping Mild Steel Electrodes
Hammer - 500g

Code WB-R-65 WB-R-75 WB-R-100 JW-AC012 JW-E1025 JW-E1032
Wire Cup Brush Ø65 x M14 Ø75 x M14 Ø100 x M14
Welding Chipping Mild Steel Electrodes Mild Steel Electrodes
JW-SFTB-005 Welding Helmets
Code Hammer 500g 5kg / 2.5mm 1kg / 3.2mm
Sensitivity Control
TEST INSTRUMENTS, TOOLS & GENSETS Power Supply JW-SFTB-002 JW-SFTB-005
Switching Time
Low / High Auto
2 x AAA Battery Solar- No Battery

1 / 15 000s 1 / 15 000s

• Light State: DIN4 • Shade Control: External, Variable

JW-SFTB-002 • Dark State: Variable Shade 9-13 • Grinding function

MAGNIFYING GLASSES

Code ZD-10D TLE-1099 TLE-1094 TLE-1104

409 • Magnifying Glass with • Ø: 90mm • Power: 230VAC, 22W (T5) • Head Magnifying Glass
holding spring clips (x2) • With illumination • Size of lens: 5” • Power: 1.8X, 2.3X, 3.7X, 4.8X
• Works on 2x1.5V AA b­ atteries • Diopter/power: 5 Diopter
• Can be locked at a • Colour: White
specific angle (not included)

MET

MEASURING EQUIPMENT

Standard Measure Tapes Digital Fibre Glass
- with spike for accuracy

LD-10NO7X TM-3M TM-5M LD-SX501E TM-20M TM-50M JC-306 JC-506
10 meter Digital display - 5 meter
Auto-rolling steel tape 3 meter 5 meter 20 meter 50 meter 30 meter 50 meter
Memory backlight
Auto-rolling steel tape Dual system measurement Manual rolling Manual rolling

(metric/imperial)

Laser Levels & Line Generators

Code LD-SL08 LD-LS10 LD-LS12 LD-LS15

Description Self levelling laser Three laser line generator Laser line generator Mini laser level
Accuracy 0.5mm per meter ± 1mm per meter ± 2mm per meter ± 2mm per meter
Features • Adjustable base • Self leveling • Ultra compact • Magnetic base with mini tripod
• Lock system with on/off switch • 3 Directional beams • Vertical & horizontal level
• 635nm laser generator

Laser Spirit Levels (with horizontal laser beam/cross line)

LS8-1 LS7
Standard Electronic Inductive

Code LD-SC2 LD-SL01 LD-LS05JD LD-LS03S TEST INSTRUMENTS, TOOLS & GENSETS
Angle finder with laser Laser level with magnetic base
Description Rotary laser Self levelling laser ± 1mm per meter ± 2mm per meter
Accuracy ± 5mm per 10 meter ± 1mm per meter • Analogue angle finder • Lightweight magnetic base
Features • Auto Rotating beam • Professional tripod • Includes carry bag • Vertical and horizontal
• Portable, suitable for • c/w carry case
construction sites • Power: 3VDC
• Power: 6VDC

Digital Vernier Digital Outside Micrometer

Code SB168101-8 SB168163-1
0-200mm - Large Display 0-25mm

MET 410

TOOL CABINETS & WORKBENCHES

Tool Cabinets • 1st drawer includes division boxes, other 3 drawers include dividers

Division Boxes

Dividers

Code ELS-274M ELS-274MA ELS-276M ELS-276MA

Size (mm) 863H x 1070W x 515D 1333H x 1070W x 515D 863H x 1070W x 515D 1333H x 1070W x 515D
4 x 150H 2 x 75H; 2 x 100H; 1 x 150H 2 x 75H; 2 x 100H; 1 x 150H
Drawers (included) 4 x 150H Blue Blue Blue

Colour Blue

Mobile Tool Cabinets • 1st drawer includes 12 division boxes, other drawers have 3 compartments each

12 Free
hanger
hooks
incl.

Code ELA-185M ELA-185MA HL3103-A
1000H x 500W x 630D 1480H x 500W x 630D 950H x 960W x 570D
Size (mm) 1 x 100H; 4 x 150H 3 x 65H; 1 x 145H; 1 x 225H
Drawers (included) Red 1 x 100H; 4 x 150H Stainless Steel
Colour Red
Perforated Rack Sets
Heavy Duty Workbenches • Load Capacity: 1000kg • Drawer Loading Capacity: 100kg
• Laminated Tops • Optional extra: Rack set WQ-62 & WQ-63 W orks with both heavy-duty
and standard workbenches

TEST INSTRUMENTS, TOOLS & GENSETS Code WA-67A-1 WAT-6203A-1 WAS-64031A-1 WQ-62
Size (mm) 800H x 1800W x 750D 800H x 1800W x 750D 800H x 1800W x 750D 605H x 1802W x 205D

Standard Workbenches • Load Capacity: 600kg • Drawer Loading Capacity: 60kg each WQ-63
• Laminated Tops • Optional extra: Rack set WQ-62 & WQ-63 605H x 1802W x 325D
25H x 1795W x 300D

Code WB-67F WBT-6203F WBS-63021F WBS-67041F
Size (mm) 800H x 1800W x 750D 800H x 1800W x 750D 800H x 1800W x 750D 800H x 1800W x 750D

411 MET

TRESTLES & PORTABLE WORK BENCHES

Height Adjustable Trestle Portable Work Benches

OPEN CLOSED

Code HL4020-H HL4020-C RWM-WB002
605W x 630D x 780H
Size (mm) 1055W x 475L x 800-920H 700W x 590L x 880H
Carrying Capacity 350kg/Pair 200kg -

Trolleys TROLLEYS & MINI STEP LADDER Plastic Step-Ladder

Trolley for moving appliances up to 100kg

HL2031 HL5039 HL5040-D HL3028
Dimensions: Ø top 286mm, Ø
Service Cart Home Trolley (set of 2) Hand Trolley bottom 435mm, (H) 425mm
Maximum load 30kg/level Maximum load 100kg/set Maximum load 100kg
470 x 210 x 830(H)mm Maximum load : 300kg
715 x 465 x 250mm
Aluminium Tool Boxes
Plastic Tool Boxes TOOL BOXES

Steel Tool Boxes

No tools
supplied

SB210211

Code ZD-B1 SB210202 MJ-3083
Size (mm) 485L x 245H x 215W 484L x 165H x 154W 520L x 210H x 230W

Code SB210302 SB210206 • 4 Drawers and top compartment Toolbox MJ-3085 TEST INSTRUMENTS, TOOLS & GENSETS
Size (mm) 400L x 160H x 155W 404L x 195H x 200W • On wheels 594L x 210H x 230W
Plastic 2-in-1 Combo • Lockable Plastic Trolley Case
Steel 3-in-1 Combo
SB210211
668L x 386H x 316W

Steel Trolley Case

Code MJ-COMBO JF-A300ABC MJ-2069 MJ-2055
Size (mm) 712H x 315D x 485W
750 x 487 x 493 581 x 297 x 266H
500 x 245 x 255 495 x 285 x 222H 670H x 345D x 580W 412
460 x 204 x 181H

NB: Tools not supplied with tool boxes

MET

Belt Bag - 5pcs TOOLS Tool Back-Pack - 11pcs

IncAllul ded! Code BM18122 (Kit)

Code BM18120 (Bag Only)

IncAllul ded! Kit Code: Bag Code: Bag Code: • Screwdrivers: 1) FLAT 3 x 100mm
BM18031 BM18030 BM18120 2) FLAT 4 x 100mm
Code 3) FLAT 5.5 x 125mm
Code BM18031 4) PHILLIPS PH1 x 80mm
5) POZI PZ1 x 80mm
BM18030 (pouch only) Kit Code:
BM18122 • Combination Pliers 160mm
• Screwdrivers: 1) FLAT 3 x 100mm • Stainless Steel Shears (BM1310)
2) FLAT 4 x 100mm • Side Cutter 140mm
3) PHILLIPS PH1 x 80mm • Voltage Tester
• Combination Pliers 180mm • Measuring Tape 3m
• Stainless Steel Shears (BM1310) • Universal Knife

IncAllul ded! Tool Case with Wheels 72pcs BM18403 (Kit)
Code BM18400 (Case Only)
Code

• VDE insulated bi-component tools • Long Nose Plier: 200mm • Measuring Tape: 3m
• Flat Nose Plier: 160mm • Rewinding Cord Marker (Chalk line)
• Screwdrivers: 2. x 75 • Water Pump Plier: 250mm • Blue Chalk: 250g
• Crimping Tool: isol 0.25 - 6mm2 • Aluminium Spirit Level: 220mm
4 x 100 • Retaining Screwdriver: 4 x 125/PH1x 150 • Adjustable Wrench
• Voltage Tester: 220V-250 V, 3.5 x 100 • Allen Wrench Set: 9pcs
5.5 x 125 • Stainless Steel Scissors • Panel Key
• Cable Shear: 35mm2 • Double Ended wrench Set: 8pcs
6.5 x 150 • Pocket Saw • Hammer: 300g
• Cable Stripping Knife: 8 - 28mm • Chisel: 250g
8 x 175 • Universal Knife • Puncher Chisel: 250mm
• Automatic Stripping Tool: 0.5 - 4mm2 • HSS and Masonary Drill Set 19pcs
PH0 x 60

PH1 x 80

PZ2 x 100

PZ3 x 150

• Nut Drivers: 10-13

• Combination Plier: 160mm

• Side Cutter: 160mm

Belt Pouch 1000V TOOL KITS Equipped Resin Case

Equipped Imitation Leather Case

TEST INSTRUMENTS, TOOLS & GENSETS Code 19142 (Kit) 19140 (Empty Case) 19231 (Kit) 19230 (Empty Case) 19172 (Kit) 19170 (Empty Case)
Size
Equipped with 200 x 100 x 200mm 360 x 290 x 75mm 430 x 340 x 160mm

413 Screwdriver for slotted head screws) Engineers pliers 190mm (AP0119N) Engineers pliers 190mm (AP0119N)
Futur II 0.5 x 3 x 100mm (1301030) Long Nose pliers c/w straight jaws (AP0416N) Long Nose pliers c/w straight jaws (AP0416N)
Futur II 0.8 x 4 x 100mm (1301040) Screwdriver for slotted head screws Screwdriver for slotted head screws
Futur II 1.2 x 6.5 x 150mm (1301065) Futur II 0.5 x 3 x 100mm (1301030) Futur II 0.5 x 3 x 100mm (1301030)
Screwdriver for Philips screws Futur II 0.8 x 4 x 100mm (1301040) Futur II 0.8 x 4 x 100mm (1301040)
“Philips” Futur II PH 1 x 75 (13021) Futur II 1.2 x 6.5 x 150mm (1301065) Futur II 1 x 5.5 x 125mm (1301055)
“Philips” Futur II PH 2 x 100 (13022) Screwdriver for Philips screws Futur II 1.2 x 6.5 x 150mm (1301065)
Engineers pliers 190mm (AP0119N) “Philips” Futur II PH 1 x 75 (13021) Screwdriver for Philips screws
Cable cutter 160mm (AP1017) “Philips” Futur II PH 2 x 100 (13022) “Philips” Futur II PH 1 x 75 (13021)
Special electricians scissors (16011) “Pozidriv” Futur II PZ 1 x 75 (13031) “Philips” Futur II PH 2 x 100 (13022)
Voltage tester (AV6104) “Pozidriv” Futur II Pz 2 x 100 (13032) Cable cutter 160mm (AP1017)
Power disc cable puller (AV8902) Cable knife (AV3920) Special electricians scissors (16011)
Insulated scissors (AV6720) Power disc cable puller (AV8902)
Cable cutter 160mm (AP1017) Panel Key (AV9310)

MET

UTILITY BOXES

Aluminium Tool Case

Code ZD-B2 ZD-B3 ZD-B4 26 Removable SB210310
Size (mm) 295D x 220W x 76H 172D x 106W x 46H 156D x 92W x 53H Compartments 460L x 150H x 335W

HL3021

460L x 330H x 75W

TOOL BAGS

• Backpack style • Hands-free vest • Multi-compartment • Belt-mount tool pouch
• Multi-compartment • Adjustable - 1 size fits all • Carry handle & shoulder strap • Universal
• Heavy-Duty material • Heavy Duty • Nylon
& 3 Zippers
material &
3 Zippers

Code SB210402 SB210404 SB210401 EUROMARIO

ELECTRONIC TOOL KITS

Nylon Tool Bag

Code ZD-963 ZD-902 ZD-906 ZD-907

TOOL KITS

Tool Kit with spot- TEST INSTRUMENTS, TOOLS & GENSETS
light and red/
amber blinking
light c/w car plug.
Uses 4 x size ‘C’
batteries (not
included)

Code PL-8985 SB210120 SB210123
13 Pieces 39 Pieces 48 Pieces
Telecoms Tool Kit
Code SB210112 SB003017
63 Pieces 10 Pieces Kit Includes:
• RJ11/45 Crimping Tool
MET • RJ11, 12, 45
connectors
• Network cable tester
• Cable stripper
• Impact insertion tool

ZD-922B

414

STORAGE BINS

Hanger Bins – Material: Polypropylene

Code TKI-8301 TKI-8302 TKI-8303 TKI-8304 TKI-8305

Size (mm) 50H x 105W x 110L 75H x 105W x 140L 75H x 105W x 190L 125H x 140W x 220L 125H x 140W x 270L
Colour Red Blue Yellow Blue Red

• Each Bin supplied with index label • All of the above Bins are designed to assemble (interlock) onto the Louvred Hanger Board, see KH-306 below

Team Bins – Material: Polypropylene

Code TKI-810 TKI-815 TKI-820 TKI-854 TKI-855

Size (mm) 75H x 100W x 160L 124H x 150W x 240L 155H x 200W x 340L 177H x 200W x 450L 177H x 300W x 450L
Colour Yellow Red Blue Blue Blue

• Optional Extra: Back Link Clips Code: EBTK0892 Code EBTK0892
• Each Bin supplied with index label and four supporting poles for interlocking Bins vertically Back Link Clips per 100
• Interlockable slots on either side ensure Bins are kept locked side by side Mobile Storage Bin Rack

Universal Team Bins – Material: • ABS Cabinet. • Polyethylene Drawers

Interlockable from left c/w 64 small bins and 30
to right or top to bottom large bins.
Small bin: 75H x 105W x 165L
Large bin: 125H x 150W x 240L

Code TKI-301 TKI-302 TKI-303 TKI-304

Cabinet Size (mm) 86H x 128W x 195D 86H x 128W x 195D 86H x 128W x 195D 86H x 128W x 195D

Drawers 73H x 112W x 167D 35H x 116W x 167D 73H x 48W x 167D 35H x 53W x 167D
(included)
(1pcs) (2pcs) (2pcs) (4pcs) HL3201

• Each Bin supplied with index label Size: 940 x 500 x 1250mm

Document Cabinets – Material: • 0.7mm cold Steel Plate Cabinet • Polyethylene Drawers

TEST INSTRUMENTS, TOOLS & GENSETS Code A4G-345 CDH-420 CKM-312 A4G-106 A4HG-10203 A4H-104

Cabinet Size (mm) 880H x 812W x 346D 295H x 464W x 230D 385H x 600W x 283D 360H x 260W x 346D 360H x 260W x 346D 360H x 260W x 346D

Drawers 45H x 230W x 326D (A4) 47H x 101W x 222D 71H x 158W x 255D 45H x 230W x 326D (A4) 71H x 230W x 326D (A4) (2pcs) 71H x 230W x 326D(A4)
(included) (12pcs) (6pcs) 45H x 230W x 326D (A4) (3pcs) (4pcs)
(46pcs) (20pcs)

B4HG-10203 B4H-104

360H x 300W x 414D(mm) 360H x 300W x 414D(mm)

71H x 270W x 393D (B4) (2pcs) 71H x 270W x 393D (B4) (4pcs)
45H x 270W x 393D (B4) (3pcs)

Louvred Board – Material: • 0.7mm cold Steel Plate

Code RM-530 TR-4116 Hanger Rack for
Hanger Bins
Cabinet Size 880H x 900W x 420D 105H x 415W x 168D
(mm) Bins included Spare Bins Code
30 x TR-4116 (Bins) Size (mm)
c/w 2 dividers per Bin TR-DIVIDER • Anti-Slip Device KH-306
Max dividers per Bin, 7 Spare Dividers • Flexible Spacing 900W x 450H
(3pcs) • Colour Labels (included)

415 MET

1000V INSULATED TOOLS

Cable Cutter with Ratchet

1604032 Description Cable Size Code Length mm
1607054 Ømm mm2 1604032 250
• For copper and aluminium cables only 32 240 1607054 380
1602200 • Special blades with high cutting capacity 1602200 200
• With opening device 52 380
AV3910 200
22 80 AV3911 –

Universal-knife with Interchangeable Blade AV3920 200
AV3921 –
• With ordinary blade
• made of shock-proof material AV6720 180

Spare blade for AV3910 AS1003 240 x 260 height

Cable-knife with Blade Protection (For Cable Stripping)

• With solid blade and insulated blade-back
• Special blade cuts insulation, not copper
• made of shock-proof material

Spare blade for AV3920

Scissors

• Surface treatment: Burnished Protected
• Handles of shock-proof plastic

Set - Cable-stripping Tool (AMS)

Kit Includes:
1 Cable-stripping-tool (AV6220)
1 Cable knife (AV3920)
1 Spare blade (AV3921)

Retaining Screwdrivers for Slotted Head Screws

Description Code

• Blade of tempered, high-alloyed steel AC1451 mm mm mm mm
(surface: browned) AC1452
AC1453 3.0 100 0.5 190
4.0 125 0.7 225
5.0 150 0.8 285

Retaining Screwdrivers for Phillips Screws

Description Code

• Blade of tempered, high-alloyed steel AC1750 No. mm mm
(surface: browned) AC1751
AC1752 0 125 225
Screwdrivers for Hexagon Screws 1 150 260
2 175 285

Description Code

• Blade of tempered, high-alloyed steel 1306040 mm mm mm TEST INSTRUMENTS, TOOLS & GENSETS
(surface: browned) 1306050 4 125 215
1306060 5 125 215
• With power handle 1306080 6 125 215
UNI 6750 1306100 8 125 225
DIN 7445 1306130 10 125 225
13 125 225
Single Ended Spanner AC2006
AC2008 6- 105
• Quality symbol VDE/GS only for sizes 10-24mm AC2010 8- 105
• Spanner inclination: 15° AC2013 10 - 105
• Tempered, alloyed steel 13 - 132

UNI 6733 DIN 7446 416

FIXED BLADE CABLE KNIVES

Code Description

31HS • Fixed Straight Blade Wire Stripper
32HS • Fixed Hook Blade - No damage on conductor cores
33HS • Fixed Hook Blade - Suitable for sector cables

MET

HYDRAULIC CRIMPING TOOLS

Code CYO-510B HP-210D HP-240F
Cable Size
Dies incl. 50-400mm² 25-240mm² 25-240mm²
Output (T) 50, 70, 95, 120, 150, 185, 240, 300, 400 Built-in revolving die 16,25,35,50,70,95,120,150,185,240
Ram Stroke 13 12 5
Features 38mm 22mm 15mm
• Rugged heavy duty design • Rugged heavy duty design •Rotatable head 180º
• Insulated fibreglass handles • Integrated rotatable head bits ensure no •Safety pressure
• Auto oil-bypass protection system misplaced parts
• 2-stage pumping action • Audible warning of high/low pressure
• Rotatable head 180º • Rotatable head 180º

Hydraulic Pumps Cable Cutter Crimping Heads

Works with Works with Works with Works with Works with
CP-390 & CFP-800-1 CP-390 & CFP-800-1 CP-390 & CFP-800-1
CYO-0410H & SHP-210D CYO-0410H & SHP-210D

Code CP-390 CFP-800-1 CPC-100 CYO-410H SHP-210D

• Hand-operated • Foot-operated pump • Can cut cable up to Ø • Cable Size: 35-300mm² • Cable Size: 25-240mm²
hydraulic pump • Internal high pressure • Built-in revolving die
• Internal high pressure protection valve 100mm depending on • Dies Incl: 35,50, 70, 95, 120, • Output (T): 12
protection valve • Max output: 700kg/mm²/ • Ram Stroke: 22mm
• Max output: 700kg/mm²/ 10 000psi the type of material. 150,185, 240, 300
10 000psi • Output range (Psi): Solid copper = Ø 42mm • Output (T): 12 • For use in & outside
• Output range (Psi): 350-10 000 • Output: 7.5T • Ram Stroke: 30mm
350-10 000 • Oil capacity: 650cc • Length: 570mm • For use in & outside DB the DB
• Oil capacity: 480cc • PT3/8" oil pipe connection • Max oil pressure: • Titanium Alloy Construction
• PT3/8" oil pipe connection 700kgf/cm² (10 000 psi)

• PT 3/8" oil pipe capacity

• Spare Blade: CPC-100-BLADE

TEST INSTRUMENTS, TOOLS & GENSETS CORDLESS POWER TOOLS

Available Crimping / Cutting / Punching Tool
while
stocks Code EZ-60UNV
last. Crimp Force 60KN
See new
range on Crimp Size 16 - 300mm2
page 429.
Punching Range Ø22mm - Ø60.5mm
417
Battery Voltage 18V

Cutting Range Ø40mm (Cu/Al Cable)

Stroke 42mm

Supplied With • Spare Battery Code: EZ-BAT18V
• 2 x Batteries + 1 x Charger • Spare Blade Code: EZ-BLADE
• Crimping Dies: 16, 25, 35, 50, 70, 95, 120, • Spare Charger Code:
150, 185, 240, 300mm² EZ-60-CHARGER
• Punching Dies: Ø22, 28, 34, 43, 49, 60.5mm

MET

TOOLS

Hydraulic Foot Pump Headstock for Punches Cutting Headstock Crimping Headstock
For Crimping and Punching
For fitting of Round or Square For cables up to For crimping of uninsulated lugs 10 to
Punches 110mm2 Dia 400mm2. Crimping force 120KN

Code BM1600 BM265 BM288 For cable 85mm Ø max Dies to be ordered separately type BM184
BM289 For cable 110mm Ø max BM284

Hydraulic Hole Punch Hex Dies for BM284 C-Sleeve Dies for BM284

Code BM185 Size Size Size
mm2 Code mm2 Code mm2 Code

For punching of 10 BM184010 120 BM184012 10 BM184210
steel Round and Square 16 BM184016 150 BM184015 16-25 BM184225
25 BM184025 185 BM184018 35 BM184235
Complete with carrying case 35 BM184035 240 BM184024 50-70 BM184270
Max size: Round 72Ø 50 BM184050 300 BM184030 95 BM184295
Square 68 x 68 70 BM184070 400 BM184040 120-150 BM184212

Dies to be ordered separately 95 BM184095

Round Punches for Mild Steel (3mm max) Round Punches for Stainless Steel (316) Square Punches for Mild Steel (3mm max)

BMT3050 BMTX305

BM301/2 BMX301/2

Code Size Shaft Pre- Code Size Shaft Pre-
mmØ Required hole
mmØ Required hole
11.5
BMT1700 17 BM301 11.5 BMTX225 22.5 BMX301 11.5 BMQ
BMT1950 19.5 BM301 11.5 11.5
BMT2250 22.5 BM301 11.5 BMTX305 30.5 BMX301 17 BM311/2/3/4
BMT2550 25.5 BM301 11.5 17
BMT3050 30.5 BM301 17 BMTX400 40 BMX302 22.5
BMT3250 32.5 BM302 17
BMT4000 40 BM302 17 BMTX500 50 BMX302 Code Size Shaft Pre -hole
BMT4500 45 BM302 17 mm Required
BMT5050 50.5 BM302 17 BMTX600 60 BMX303 BMQ30 30 BM311 19.5
BMT6200 60 BM302 BMQ46 BM312 19.5
NB: Shaft to be ordered separately BMQ68 46 BM313 28.5
BMQ92 BM313 28.5
Manual Punch (2mm Mild Steel max.) BMQ138 68 BM314 28.5

Punch to be ordered 92
separately
138
BM301/B Hexbolt for punches BMT1700 – BMT3050
NB: Shaft to be ordered separately BM302/B Hexbolt for punches BMT3250 – BMT6200 NB: Shaft to be ordered separately

Hand Hydraulic Press Hand Crimping Tool Dies for BM582, BM1842, BM182P

3WYaerraarnty For Uninsulated Terminals 10 to 240mm2 For Uninsulated Terminals 10 to TEST INSTRUMENTS, TOOLS & GENSETS
Including Dies for BM1824 150mm2

Dies Size mm2 ID
BM182010 10 & 120 7/18

BM182016 16 & 95 7.5/16 Hex Dies C-Sleeve Dies
9/14
BM182025 25 & 70 11/12 Code Size mm2 Code Size mm2
20
BM182035 35 & 50 22 BM182010 10 & 120 BM182210 10
BM182015 150 25
Assortment kit with: BM182018 185 BM182016 16 & 95 BM182225 16 - 25
Hand hydraulic press BM182024 240
50kN BM182025 25 & 70 BM182235 35
Dies-set for uninsulated
terminals 10 to 240mm2 Including carrying case. BM182035 35 & 50
in carrying case. Dies to be ordered separately
BM182015 150

Code BM1824 Kit c/w dies in carry case BM182018 185

Code BM182P Press only in carry case Code BM582 BM182024 240

MET 418

CABLE CUTTERS

Cable Cutters for Copper Cable

Code Description

BM568 For cutting copper cable up to 35mm²

BM5681 For cutting copper cable up to 60mm²

BM570 For cutting copper cable up to 120mm²

BM568 BM570 BM571 BM571 For cutting copper cable up to 240mm²

BM572 For cutting copper cable up to 400mm²

Cable Cutters for Aluminium & Copper Cables

LK-22A Code Description
LK-60A
CC-100L LK-22A For cutting copper & aluminium cables up to 22mm²

LK-60A For cutting copper & aluminium cables up to 60mm²

CC-100L For cutting copper & aluminium cables up to 100mm²

HS-325A For cutting copper & aluminium cables up to 150mm²

HS-520A For cutting copper & aluminium cables up to 240mm²

LK-250 For cutting copper & aluminium cables up to 250mm²

LK-500 For cutting copper & aluminium cables up to 500mm²

HS-325A/520A

LK-500/ LK-250

X-PRO 50mm2 Shears X-PRO Evo 50mm2 Shears Cable Shears Maxi Grip

PatReendAtewDdoartd

TEST INSTRUMENTS, TOOLS & GENSETS Code BM1325 BM1330 BM1335 BM1311

419 • Innovative new spring loaded • Ergonomic Design for stronger • Wire Shears • Wire Shears
• Robust ergonomic handle • Bi-Component handle for greater
opening action grip & increased comfort • For the easy cutting and stripping cutting force
of Aluminium and Copper cables • Non-slip serrated blades
• For the easy stripping and cutting • New design accommodates up to a size of 35mm² • Tempered stainless steel blade
• Tempered stainless steel blade • Belt clip holder
of cables different hand sizes • With safety lock

• Especially designed blade for • New reinforced handles

cutting of Aluminium & Copper • Longer lever & micro serrated

cables up to a size of 50mm² blades for easier cutting of cables

• Belt Clip Holder up to 50mm2

BOLT CUTTER

Heavy Duty Bolt Cutter

Code Description

HT10-6213 610mm (24”) Bolt Cutter

HT10-6214 762mm (30”) Bolt Cutter

• Alloy Steel • Tubular Handle • Jaws hardened to HRC55-61

MET

CRIMPING TOOLS

Professional Description Economy
Tools Code Tools Code
BM Type

BM534 For insulated lugs (red, blue, yellow) LY-03C

BM537 For insulated boot-lace ferrules LY-04WF
(0.5-4.0mm2) (0.5-6.0mm2)

BM539 For insulated boot-lace ferrules (6-16mm2) LY-16WF
F or insulated boot-lace ferrules (10-35mm2) LY-35WF

BM531 For non insulated auto lugs (0.5-6mm2) LY-03B

BM535 For non insulated lugs KH-16 (1.25-16mm2)
(0.5 - 10mm2) KH-22 (5.5-25mm2)



– Hex hand crimp for non insulated lugs HX-16 (6-16mm2)
HX-26B (6-25mm2)
HS-05H (1.5-25mm2)

BM543 For coaxial connectors for cable HS-02H
RG58-59-62-6

BM538 For insulated boot-lace ferrules HSC8-6-4
(0.5 - 6mm2)
(0.5 - 10mm2)
ZD-501006
BM549 Crimping tool for RJ11, RJ12, RJ45


Code Description Code Description
BM524
BM525 Uninsulated Terminals 0.5-10mm2 BM523 Heavy Duty crimping Tool
BM526 Uninsulated Terminals 2.5-16mm2 for use with uninsulated t­erminals 10-120mm2
BM527
Uninsulated Terminals 6-35mm2

Bootlace Terminals 25 - 35 - 50mm2

Hand Crimping Tools - For uninsulated lugs

CT-80 CT-80 Crimping tool with movable & revolving dies 10-95mm2

HX-50B/150BX & HX-50B Hex crimping tool with movable & revolving dies 6-50mm2
HX-245B
HX-150BX Hex crimping tool with movable & revolving dies 25 - 150mm2 TEST INSTRUMENTS, TOOLS & GENSETS

HX-245B Hex crimping tool with movable & revolving dies 70-240mm2

MT-120 Heavy Duty Point Crimping Tool 16 - 95mm2

MT-120

Crimping Tool Kit - with exchangeable dies

Code BM5345 ZD-922A

BM5345 ZD-922A Complete Kit in a carry case for Complete Kit in a carry case for
the ­following applications: the f­ollowing applications:
• Insulated Terminals 0.25-6mm2 • Insulated Terminals 0.25-6mm2
• Boot Lace Terminals 0.5-4mm2 • Boot Lace Terminals 0.5-16mm2
• Boot Lace Terminals 6-16mm2 (2 dies)
• Barrel Open Terminals 0.5-6mm2 • Hex crimping of uninsulated
• Uninsulated Terminals 0.5-10mm2
terminals up to 35mm2

MET 420

CRIMPING TOOL KITS

Kits Code Data Socket Insertion Tool Code
HT-914A
For boot-lace insulated ferrules YS-03C0-1A Insertion tool for data socket use on
300pcs (0.5-4.0mm2) c/w Tool type 66 & 110/88 type connectors

YS-03C0

YS-03CO-1A

151pcs Mixed Insulated Lugs c/w Y-190 HT-914A KH-502
Tool type KH-502 Multipurpose Tool

Y-190 Y-200 KH-502
Y-202
120pcs Mixed Insulated Lugs Y-202 45pcs Mixed Insulated Lugs c/w SB201437
Terminal Crimp and Wire Stripper

300pcs Mixed Insulated Lugs Y-200

SB201437

BOOT LACE FEATURE KITS

Kit for Insulated Plugs Kit for Boot-Lace Ferrules

Code BM00411 BM00412

Kit Includes Tool: BM534 Kit Includes Tool: BM541

Red 1.5mm2 Insulated : Blue 2.5mm2 Insulated: Bootlace Ferrules Single: Bootlace Ferrules Double:
4mm Ring - 100pcs; 4mm Ring - 100pcs; 4mm fork - 100pcs; 0.75mm2 white 500pcs; 2 x 0.75mm2 white 200pcs;
4mm fork - 100pcs; 5mm Ring - 100pcs; 10mm Pin - 100pcs; 1mm2 yellow 500pcs; 2 x 1mm2 yellow 200pcs;
5mm Ring - 100pcs; Ferrules - 100pcs; 1.5mm2 red 500pcs; 2 x 1.5mm2 red 200pcs;
10mm Pin - 100pcs; 6.3mm female disc. - 100pcs; 2.5mm2 blue 250pcs; 2 x 2.5mm2 blue 100pcs;
Ferrules - 100pcs; 6.3mm male disc. - 100pcs; 4mm2 grey 200pcs; 2 x 4mm2 grey 100pcs;
6.3mm female disc. - 100pcs; 6.3mm insulated female disc - 50pcs 6mm2 black 100pcs; 2 x 6mm2 green 50pcs
6.3mm male disc. - 100pcs 10mm2 ivory 50pcs;
16mm2 green 50pcs
TEST INSTRUMENTS, TOOLS & GENSETS Yellow 4-6mm2
5mm Ring - 50pcs; Ferrules - 50pcs; 6mm Ring - 50pcs

Guillotine DIN RAIL CUTTER Support Guide

Dies

Code BM2691 BM269112 BM269113 BM26912 BM269122
421 For rail
Cutter & puncher for rails EN 50035, EN For rail Support Guide for Support Guide
50022, EN 50045. Designed for extremely DIN35(DR35) 7.5mm DIN35(NS35/15) 15mm BM2691 for rail
rapid, precise and safe cutting & punching of
standardised metal frame profiles. MET 7.5 & 15mm

HAND TOOLS

Slotted Electricians Screwdrivers Screwdrivers
Phillips Electricians Screwdrivers
Pozidrive Electricians Screwdrivers Code mm mm Code mm mm

mm 145 SB1115 mm 125 225
170 SB1116 150 260
SB1112 2.5  75 200 SB1118 5.5 175 285
SB1113 3.0 100 6.5
SB1114 4.0 100 Code 8.0 mm

Code mm mm mm SB1122 mm mm 210
SB1123 272
SB1120 0 60 130 2 100
SB1121 1 80 180 3 150

Code mm mm mm Code mm mm mm

SB1130 0 60 130 SB1132 2 100 210
SB1131 1 80 180 SB1133 3 150 272

Screwdrivers 7 Piece Kit
5 Piece Kit

Code mm mm Code mm mm mm mm
mm mm SB1197
 75 145 2.5 0  75 145
SB1195 2.5 100 200 4.0 1 100 170
4.0 150 260 5.5 2 125 225
 80 180 6.5 150 260
6.5 100 210  60 130
 80 180
1 100 210
2

Nutdriver Kit - 7 Pieces

Code Sizes (mm) Length

SB1195 SB1197 / SB154115 SB154115 5, 6, 8, 10, 11, 12, 13 245mm

Cable Tie Tensioners

SB257803 SB256713 HS-600A TG-100

Silicone / Caulking gun Chalk line Cable Tie Gun for Cable Tie Gun for
Rubber grip to prevent slipping tensioning and auto cutting for tensioning and manual cutting for
TEST INSTRUMENTS, TOOLS & GENSETS
Ties 2.5-4.8mm wide Ties 2.5-4.8mm wide

Tubular Hacksaws Combination Square 300mm Plastic Tape Dispenser
SB208101

Oval Tubular Hacksaw Frame with
aluminium handle 250-300mm

SB208172

Square Tubular Hacksaw Frame with SB205562
Adjustable Square with spirit level
aluminium handle and soft gripMET
Stainless Steel Rulers
300mm (12”)

SB208311 (12Pc)
Spare Hacksaw Blades 300mm (12”)

ARK-243111-6

All Aluminium 6” Junior Hacksaw ARK-167103-12 ARK-167103-20 HL5041
For use with packaging tape
12”/300mm 20”/500mm

MET 422

HAND TOOLS

Mini Pliers • Bi-Material TPR Handle (soft rubber) • Fully Polished

Long Nose Bent Nose Flat Nose Round Nose Diagonal Cut End Cut Linesman Needle Nose

Code HT10-3061 HT10-3062 HT10-3063 HT10-3064 HT10-3065 HT10-3066 HT10-3067 HT10-3068
Size 128mm
128mm 115mm 101mm 101mm 101mm 115mm 153mm

Combination Pliers Long Nose Pliers Side Cutters

• C hrome Vanadium Steel
• M icro Finish
• Bi-material TPR Handle

Code (150mm) 6” HT10-2021 HT10-2024 HT10-2026
Code (180mm) 7” HT10-2022 – HT10-2027
Code (200mm) 8” HT10-2023
Shifting Spanners HT10-2025 –
Water Pump (Gas) Pliers Vice Grip (Curved Jaw)

Code (125mm) 5” – – HT10-4026
Code (180mm) 7” – – HT10-4027
Code (200mm) 8” HT12-1062 HT10-5531
Code (254mm) 10” HT12-1063 HT10-5532 –
Code (300mm) 12” HT12-1064 HT10-5534 HT10-4028

10Pc –
Knife Blades
Utility Knives & Sets

Utility Knife with 3Pc Utility Knife Set Utility Knife with auto Spare Blades for 3Pc File Set
3 blades stored in body lock and rubber grip utility knife 10pcs/ 200mm (8'')
flat, round, half round
pack

• Multi-Stop Button & 9mm (W) blade 9mm (W) x 80mm (L)
Retractable Blade
TEST INSTRUMENTS, TOOLS & GENSETS SB215152 SB215162 SB215120 SB215153 SB208863
• Zinc Alloy

SB215009

Hammers & Mallets

Claw Hammer Ball Hammer Rubber Mallet

Fully polished with plastic coating handle Fully polished with plastic handle With fibreglass handle
566gram SB203016 440gram SB203162-16
672gram SB203162-24 440gram SB203541-16
Two Way Mallet 672gram SB203541-24
Drop forged Stone Hammer Stone Chisel with Protector

With fibreglass handle 1kg ARK-146301-1 3/4” x 5/8 x 8” Stone Chisel
2kg ARK-146301-2 ARK-255213
35mm Ø SB203591-35
45mm Ø SB203591-45 MET

423

HAND TOOLS

Spanners • Material: Chrome Vanadium Steel

Combination Spanner Double Open Ended Spanner

Size Code Size Code Size Code Size Code
mm mm mm mm

6 HT12-4206 19 HT12-4219 6–7 HT12-6206 20 – 22 HT12-6220
7 HT12-4207 21 – 23 HT12-6221
20 HT12-4220 8–9 HT12-6208 22 – 24 HT12-6222
25 – 28 HT12-6225
8 HT12-4208 21 HT12-4221 10 – 11 HT12-6210 27 – 29 HT12-6227
9 HT12-4209 30 – 32 HT12-6230
10 HT12-4210 22 HT12-4222 12 – 13 HT12-6212
11 HT12-4211
12 HT12-4212 23 HT12-4223 14 – 15 HT12-6214
13 HT12-4213
14 HT12-4214 24 HT12-4224 16 – 17 HT12-6216
15 HT12-4215
16 HT12-4216 25 HT12-4225 18 – 19 HT12-6218
17 HT12-4217
18 HT12-4218 26 HT12-4226 Auto Wrench 9"
SB137803-9
27 HT12-4227 Code

28 HT12-4228

29 HT12-4229

30 HT12-4230 SB137803-9
32 HT12-4232

Spanner & Allen (Hex) Key Sets

9Pc Combination Spanner Set 6Pc Double Open Ended Spanner Set 30Pc Allen (Hex) Key Set 9Pc Allen (Hex) Key Set
7, 8, 10, 11, 12, 13, 16, 17, 19mm 6+7, 8+9, 10+11, 12+13, 14+15, 0.028-3/8'', 0.7-10mm Flat End 1.5-10mm
16+17mm
Chrome Plated

SB202102 SB202106 SB202403 SB202407
9Pc Ball Point Hex Key Set
Ratchet Combination Wrench 9Pc Ratchet Wrench Set
Code SB233157
Size mm Code SB133249
1.5 - 10mm
SB133211-8 8 72 Tooth ratchet 31 Piece Screwdriver Bit Set
SB133211-10 10 needs only 5˚ of
SB133211-13 13 movement to turn
SB133211-15 15
SB133211-17 17 a fastener
SB133211-19 19 8, 10, 11, 12, 13,
14, 16, 17, 19mm
72 Tooth ratchet needs only 5˚ of movement to turn a fastener
Screwdriver Kits
Metric Socket Wrench Kit Screwdriver Kits

22MRA-CV-S SB156237 CT-2016 SB157243 TEST INSTRUMENTS, TOOLS & GENSETS
Screw driver set Phillips, Flat, Torx and Hex
Kit Includes: • 16pcs 1/2" Dr. Sockets: 16 Piece precision
10-19, 21-24, 27, 30, 32mm • 2pcs 1/2" Dr screwdriver set 424
Extention BAR "3" & 5" • 1pc 1/2"(M)x3/8"
(F) Adaptor • 1pc 1/2" Dr. Universal joint
• 1pc 1/2" Dr. F Rachet handel
• 1pc blow case

MET

CABLE & WIRE STRIPPING TOOLS

Code STRIP-2 STRIP-3 STRIP-400
As per STRIP-2 with built-in side cutter
2-level stripping of all ­coaxial cables of This tool allows circular and horizontal stripping
4.8 - 7.5mm outer Ø and needs no adjustment of cutting depth.
Performance Range: Range: Flex Cables: 4 - 13mm Ø.
Coaxial 4.8 - 7.5mm Ø Solid Conductors: 0.5 - 6mm2.
Cabtyre 4 x 0.75mm2 Multi-level of coaxial cables: 4 to 8 mm Ø.
Flexible cables 1.5mm2 - 16mm2 Built in side-cutter.

FLAT ROUND

Code STRIP-5 STRIP-7-FLAT STRIP-7 STRIP-300 (Duo - strip/crimp)

• Automatic wire stripper for all common Flat Cables: Cable and wire stripping of two or Three tools in one:
stranded and solid conductors of 0.2 - 6.0 mm2 Wire Stripper for inner insulations from
• Adjustable length stop of 5 - 12mm three core flat cables with PVC i­nsulation from 0.5 - 6mm2; ­
(removable if required) 0.75mm2 to 4.0mm. Crimping of bootlace terminals with two crimping
• Easily accessible built-in side cutter for max ranges: 0.75mm2 - 1.5mm2 and
2mm Ø Round Cables: Cable and wire stripping of 2.5mm2 - 6.0mm2 as well as built-in side cutter
flexible cables in a range of 0.5mm2 to 16.0mm2. for max. 6.0mm2
Solid conductors from 0.5mm2 to 10mm2.

Spare Blade: STRIP7-BLADE (Round)

Code STRIP-SOLAR MINI STRIP-7-SOLAR STRIP4-28H STRIP-428V Spare Blade
STRIP4-BLADE
• Stripping depth stop An automatic wire stripper Both circular and longi- Same as STRIP4-28H, plus:
• Compact wire stripper for all common round tudinal cuts are possible Cable connections, sockets, STRIP-428
designed for the solar cables used in solar due to a self-turning strip- fuses, circuitry, connecting
industry engineering. Precise ping blade. Accurate, fast boxes, lamps and fairy lights Same as STRIP4-28H,
• Suits 1.5-Ø6mm adjustment allows easy and safe stripping of all etc. can be safely tested for plus: This is the first cable
• Side blade cutter removal of multiple common round cables of AC voltage by an integral stripper of its kind which
insulation layers of solar 4 - 28mmØ. electric potential field sensor. has an additional hook
cables from 1,5-6mm². No current flow is required. blade that can be retracted
into the tool & be fixed in
both positions.

TEST INSTRUMENTS, TOOLS & GENSETS Round Cable Stripper Second bit inside
For all round cables of 8 - 13mm the handle

• Cable stripper for accurate fast (e.g. 3 x 1.5mm2 up to 5 x 2.5mm2)
and safe stripping of common round
cables 4 - 28mmø. Stripper Voltage tester
• Variable adjustment of cutting For all common stranded 110 - 250V
depth with adjusting wheel with and solid conductors of
no damage to the inner conductors • 12 Piece retail counter display 0.5mm2 to 6.0mm2
• Automatic adjustment for circular stand c/w 12 pieces of
or longitudinal cuts through STRIP-S428-M Coax Stripper
turnable blade Two- or three-level stripping
• Additional function: stripping STRIP-S428/12-M of all common coaxial cables
of conductors for all common fo 4.8 to 7.5 mm outer Ø.
flexible and solid conductors
0,5mm2 - 6.0mm2 Built in side cutter Two turnable bits
For PVC-insulated round 1.PZ1 3.5 x 0.6mm
STRIP-S428-M cables of max 9mm2 2.PZ2 4.0 x 0.8mm

42C5ode STRIP-500
425
MET

CABLE & WIRE STRIPPING TOOLS

Professional Cable Stripping Starter Kit

Code PRO-STARTER

All standard cable types can easily be stripped and dismantled using the tools in the kit

STRIP-428: The cable stripper series S 4 - 28 allows precise, quick and safe stripping of all standard round cables with a
diameter between 4 and 28millimeters. Comes with retractable hook blade.

STRIP-5: Automatic Wire Stripper. Precise work with adjustable length stop (5 - 12mm). Side cutter up to 2mm diameter.
STRIP-13: For all standard round cables diameter 8 - 13mm. Flush stripping, even in hard to reach places.
STRIP-2: Two-level stripping of all common coaxial cables.

SB201422 SB201426 SB201009 LY-700A LY-700D
For wire 0.5-6.0mm2 For wire 0.5-2.0mm2 For wire 0.5-6.0mm2
Wire Stripper for cables Wire Stripper for cables
0.5-4mm2 6-16mm2 LY-700B
0.75-6mm2 For wire 1.0-3.2mm2

HAND TOOLS

Suction Lifters

Code Description Cup Carrying
Size Capacity
BM1770 BM1760 1 Cup suction disc 120mm Ø
BM1770 2 Cup suction discs 30Kg
BM1760 BM1761 Spare suction disc 120mm Ø 60kg
─
120mm Ø

GAS POWERED HEAT TOOLS

All models use
Butane gas

Code ES-720TH ES-720SI ES-650SI ES-720KB ES-650KB
Weight 170g
Gas Capacity 170g 19ml 170g with cap Kit includes: Kit includes:
Operating Time 19ml 90min • ES-650 cordless butane
Temperature 90min Up to 480˚C 15ml • ES-720 multi function powered soldering iron
Features Up to 1300˚C Portable multi-function • 2.4mm Chisel tip
Portable heavy-duty torch soldering iron/heat tool 50min soldering iron • 3.0mm Diagonal tip TEST INSTRUMENTS, TOOLS & GENSETS
Size Meets U.S. child resistant • Hot knife tip
standard 180 x 52 x 157mm ± 200 - 450˚C • 2.4mm Conical tip • Heat blower tip
Accessories 180 x 52 x 111mm • Deflector tip
Cordless butane powered • 2.4mm Chisel tip • Sponge
• Soldering wire
soldering iron/heat tool • Hot knife tip

• Deflector tip

237 x 38 x 25mm • Sponge
(with cap) • Soldering wire

• Wrench

Code Description Code Description Code Description
L-016 Conical 1.6mm L-132 Chisel 3.2mm L-310 Hot knife

L-024 Conical 2.4mm L-1105 Chisel 10.5mm L-311 Hot knife

L-124 Chisel 2.4mm L-230 Diagonal 3.0mm L-510 Heat blower

Accessories included with ES-720KB A-BR Burning room L-610 Heat deflector

MET 426

SOLDERING IRONS

Soldering Irons

Code Description Spare Heater Spare Tips
Element
Z88-2026/8 Z79-1146 Z88-2026 40W mains Soldering Iron – Z79-2120
ZD-715L Z79-1156 Z88-2028 60W mains Soldering Iron – Z79-2320
Z79-201B ZD-715L-100W 100W mains Soldering Iron – Z79-8504
Z89-2926 ZD-715L-200W 200W mains Soldering Iron – Z79-8506
Z89-2934 Z89-2934 48W station type Z79-201B Z79-1146
Soldering Iron 160°C-480°C digital Z79-1156
Z89-2926 48W station type Z79-201B Z79-1146
Soldering Iron 150°C-420°C Z79-1156
Z78-201B Spare Heater Element for Iron – –
Z89-2934 & Z89-2926
Z88-201B Spare Iron for Z89-2934 & Z89-2926

Solder Spools
SN60% PB40%

SH-827

Code T-1 SH-814B SH-60 POT-100 140W SSA08500 Ø0.7mm
140W Solder Pot SSA10500 Ø0.90mm
SH-827 50W Soldering Iron stand 50W Electric Solder Sucker SSA12500 Ø1.25mm
Solder Sucker SSA20000 Ø2.0mm
SH-60H • 500g rolls
T-1 Spare element
Spare Tip

OTHER TOOLS

TEST INSTRUMENTS, TOOLS & GENSETS Code TAURUS-558 TAURUS-107 ZD-509 ZD-7GLUE

427 Solder pot lead free Solder pot lead free Hot Airgun Low/Off/High ZD-7
Adjustable Temp: 200-600˚C Adjustable Temp: 200-600˚C 200°C – Off – 500°C 40Watt Glue Gun
1500 Watts
Power: 250W Power: 500W ZD-7GLUE
Pot dimensions: 55 x 55 x 45mm Pot dimensions: 100 x 70 x 45mm 6Pcs Ø 11 x 100mm

Capacity 1,2kg Capacity: 2,3kg ZD-7GLUE-300
6Pcs Ø 11 x 300mm

12VDC WRENCH & JACK

Auto kit for every car owner 12VDC impact wrench and jack

Code HF-12

Impact Wrench Electric Jack

Voltage: 12VDC Voltage: 12VDC
Working Current: ≤8A Max Load: 950kg
Max Torque: 300 NM Working Current:≤10A
Output Shaft: ½"m (13mm) Lifting Height: 22cm (12-34cm)

MET

HAND RIVETERS

HR705 HR702 HR710 HR720

• High grade aluminium die cast housing • Carbon steel forged housing and ­handle • L ever design reduces physical strength
with drop-forged carbon steel upper with powder coated surface. for all rivet sizes.
handle.
• Jaw and jaw case are made of chromed, • The three-jaw design can provide ­better
• S teel and jaw case are made of chromed, heat treated steel. performance with only a change of nose
hardened steel plate. nozzle.
• Designed for industrial use.

Code Length (mm) Rivet Setting Capacity

HR705 265 Up to 4.8mm (3/16”) for all materials
HR702 255 Up to 4.0mm (5/32”) for all materials and 4.8mm (3/16”) for aluminium
HR710 300 Closed/810 Open Up to 6.4mm (1/4”) for all materials
HR720 430 Up to 4.8mm (3/16”) for all materials

BLIND RIVETS

Aluminium Rivets with Steel
Mandrels

Domed Head

Code Length Grip Diameter Hole Size Head Dia Head Standard Strength
L Range D (mm) H Thickness N. (min.)

G T Shear Tensile

AS3.2-8-* 8 3-5
AS3.2-10-*
AS3.2-12-* 10 5-7 3.2mm 3.3-3.4mm 5.8-6.5 1.2 535 650
AS4-6-* 1.5 850 1020
AS4-8-* 12 7-9 1.6 1160 1420
AS4-10-*
AS4-12-* 6 1.5-2.5
AS4-14-†
AS4-18-† 8 2.5-4.5
AS4.8-10-†
AS4.8-12-† 10 4.5-6.5 4.0mm 4.1-4.2mm 7.0-8.0
AS4.8-14-†
AS4.8-18-† 12 6.5-8.5

14 8.5-10.5

18 12.5-14.5

10 L 4-6 4.8mm 4.9-5.0mm 8.5-9.5
12 6-8
TEST INSTRUMENTS, TOOLS & GENSETS
14 8-10

18 12-14

Add quantity to code:* 1000 (box packed),100 (packed in polybag for retail). † 500 (box packed), 100 (packed in polybag for retail).

ROPE ACCESSORIES

Eye Bolts Thimble Clamp Tensioner

For rope,
see page
289

Code SB209333/M8 SB209333/M10 SB209333/M12 SB209331/6 SB209332/6.5 SB209336/8
Size 6mm 6.5mm 8mm
10mm(L) 13mm(L) 16mm(L)

MET 428

PROFESSIONAL POWER TOOLS

Crimping Tool BZ-300 Supplied With

Code 16-300mm2 • Dies 16, 25, 35, 50, 70, 95,120, 150, 185, 240, 300mm²
60KN • 2 x Batteries + 1 x Charger (230VAC/18VDC)
Crimp Size 300 • 1 Set Spare Cylinder Seals
Crimp Force 17mm • 1 Set Spare Safety Valve Seals
Crimps/Charge 18V / 3Ah • Spare Battery Code: BZ18/3AH
Stroke
Battery

Crimping / Cutting / Punch Tool Supplied With

Code BZ-600UNV • Dies 16, 25, 35, 50, 70, 95,120, 150, 185, 240, 300mm²
• Punch Round 22.5, 25.4, 32.5, 40.5, 50.5, 61.5mm
Crimp Size 16-300mm2 • 2 x Batteries + 1 x Charger (230VAC/18VDC)
Crimp Force 60KN • 1 Set Spare Cylinder Seals
Crimps/Charge 160 • 1 Set Spare Safety Valve Seals
Cuts/Charge 70 • 1 x Crimping Adaptor & 1 x Punch Adaptor
Cutting Range Ø40mm (Cu/AL + Armoured) • Draw studs 3/4”, 7/16” + Spacer
Punch/Charge 100 • Spare Blade Code: BZ600-BLADE
Punching Range Ø22.5mm - Ø61.5mm • Spare Battery Code: BZ18/3AH
Stroke 42mm
Battery 18V / 3Ah Supplied With

Punch Tool • Punch/die 22.5, 25.4, 32.5, 40.5, 50.5, 61.5mm
• Draw Studs 1 x 7/16 x 3/4” + 1 x 3/4 x 3/4”
Code BZ-12 • 2 x Batteries + 1 x Charger (230VAC/18VDC)
61.5Ø / 35 x 65mm • 1 Set Spare Cylinder Seals
Punch Size 120KN • 1 Set Spare Safety Valve Seals
Punch Force 180 • Spare Battery Code: BZ18/3AH
Punch/Charge 25mm
Stroke 18V / 3Ah
Battery

Drill Press POWER TOOLS Heat Gun

Heat Gun

TEST INSTRUMENTS, TOOLS & GENSETS Code ZJQ4116-A1 PLD2230 PLD2232
Power 500W 2000W 2000W
Features Variable spindle 3 Speed / Temperature Settings: 3 Speed / Temperature Settings, with
Speed: 390 - 2600rpm 1: 50°C / 500 /min Adjustable Temperature for Setting 2 & 3:
429 Spindle travel: 50mm 2: 450°C / 250 /min 1: 50°C / 250 /min
Overall height: 630mm 3: 600°C / 500 /min 2: 50-600°C / 250 /min
Chuck: 13mm 3: 50-600°C / 500 /min
Able to work continuously without overheating.

WALL CHASER

Code LT83322 This wall chasing machine Spare Blades
Code* 16mm LT83322-16
Supply: 230VAC/ 50Hz will not damage the
Code* 25mm LT83322-25
Power: 1100W wall material and can
Code* 35mm LT83322-35
No load RPM: 2000RPM cut straight or curved *For wall slot size

Cutting width: 16-35mm grooves. Every cut will case

Max depth: 20-35mm leave a deep wide groove.

MET

PROFESSIONAL POWER TOOLS DIY

Impact Drills Rotary Hammer Drills Impact Drill

Code GSB-13-RE GSB-19-2-RE GBH-2-20-D GBH-5-40DCE PSB-500-RE
500W
Power 600W 850W 650W 1150W
No Load Speed 0 - 2800rpm 0 - 777 / 1990RPM 0 - 1300rpm 170 - 340rpm No load speed 50 - 3000rpm
Impact Speed 0 - 4200ipm 1500 - 3050ipm Impact speed 33000ipm
Chuck Size ― ― SDS-Plus Chuck 13mm
Variable Speed 1.5 - 13mm 1.5 - 13mm SDS-Max 1.6kg
Weight Yes Yes
Yes Yes 2.3kg 6.8kg Angle Grinder
1.6kg 2.6kg Angle Grinders

Rotary Hammer Drill

Code GBH-12-52D GWS-7-115 GWS-850C GWS-26-230-B PWS-700-115
701W
Power 1700w 720W 850W 2600W
No Load Speed 0 - 220rpm 11000rpm 11000rpm 6500rpm No load speed 11000rpm
Impact Speed 1750 - 2150ipm Disc Ø 115mm
Chuck Size SDS-Max ― ― ― Spindle M14
Spindle Size ― ― ― 1.68kg
Disc Diameter ― M14 M14 M14 Glue Gun
Weight ― 115mm 125mm 230mm
11.5kg 1.9kg 1.9kg 5.6kg PKP-18-E
200W / 16W
Jig Saw Sabre Saw Blower Heat Gun Temp 200⁰C
Glue stick Ø11mm
Glue Capacity 20gr/min

0.35kg
Heat Gun

Code GST-150-BCE GSA-1100-E GBL-800-E GHG-660-LCD
Power 820W 2300W
No Load Speed 780W 1100W
Features 16000rpm Temp: 50 - 600⁰C
500 - 3100spm 0 - 2700spm Air Flow : 4.5m³/h Air Flow: 250 - 500l/min
Weight
26mm Stroke 28mm 1.8kg 1kg
Metal Cut-Off Tool Grinder/Drill/Bag Set
Cutting Depth wood 150mm Cutting Depth wood 230mm PHG-500-2

Cutting Depth Alu 20mm Cutting Depth metal 20mm 1600W TEST INSTRUMENTS, TOOLS & GENSETS
Temp 300/500⁰C
2.7kg 3.6kg Air flow 240/450l/min

Drill/Driver Impact Drill/Driver Thermal trip
0.75kg

Jig Saw

Impact Drill Grinder

Code GSR1800-V-LI GSB-18-V-LI GCO-2000 GWS/GSB-SET

Power 33 / 18Nm 60 / 23Nm 2000W 500W 670W PST-650
No Load Speed 0-400 / 1300rpm 0-500 / 1700rpm
Impact Speed 3500spm 0-2700rpm 12000rpm 500W
Chuck Size ― 25,500ipm
Battery 1.5 - 10mm 1.5 - 13mm Disc Ø: 355mm Chuck 13mm Disc Ø 115mm Speed 3100spm
Weight Lithium-ion 18V / 1.5Ah Lithium-ion 18V / 1.5Ah
Spindle Lock 0 - 141000ipm Spindle 14mm Cutting depth Wood 65mm
1.4kg 1.6kg
Cut Capacity Rect. 0° 150x70mm Reverse Spindle Lock Cutting depth Steel 4mm

18kg 1.8kg 1.5kg 1.6kg

MET 430

SAND PAPER & SANDING BELTS

Floor Paper Rolls

Code Description Grit Pcs/Pack Packs/Box
P60D 1 25
FP-P60D/1 Floor Paper Strips P80D 1 25
FP-P80D/1 Floor Paper Strips P100D 1 25
FP-P100D/1 Floor Paper Strips
P40
Sanding Belts P60
P80
SB-75x532-P40/2 Sanding Belts - 75 x 532mm 2 12
SB-75x532-P60/2 Sanding Belts - 75 x 532mm P80C 2 12
SB-75x532-P80/2 Sanding Belts - 75 x 532mm P120C 2 12
P222C
Water Paper Sheets
P60D
WP-P80C/4 Coarse Water Paper Sheets - 230 x 280mm P80D 4 25
WP-P120C/4 Medium Water Paper Sheets - 230 x 280mm P120D 4 25
WP-P222C/4 Fine Water Paper Sheets - 230 x 280mm 4 25

Cabinet Paper

CP-P60D/4 Coarse Cabinet Paper Sheets - 230 x 280mm 4 25
CP-P80D/4 Medium Water Cabinet Sheets - 230 x 280mm 4 25
CP-P120D/4 Fine Water Cabinet Sheets - 230 x 280mm 4 25

POWER TOOL ACCESSORIES - DRILL CHUCK

Drill Chuck - Keyless Type

Code Description Clamping Female Thread Diameter mm Min-Max
width mm Length mm

CTDCP0023 Chuck with double sleeve 2-13mm 3/8-24UNF 43 63-76

Screwdrivers CORDLESS POWER TOOLS

Drills

SND112 SND113 SND114 SND202 SND203

TEST INSTRUMENTS, TOOLS & GENSETS Code SND112 SND113 SND114 SND202 SND203
3.6V 6V 3.6V 18V 18V
Volts
Speed 250rpm 180rpm 150rpm 0-550rpm 0-550rpm
Spare Battery SND3.6V SND6V SND3.6V SND18V SND-203BAT
Delta Sander
Reciprocating Saw Jig Saw

Code WLP827-01 WLP821-01 WLP825-01
Power 18V Ni-cd Battery 18V Ni-cd Battery
No Load Speed 18V Ni-cd Battery
2800rpm 1700rpm 6000rpm
Spares Wood: 50mm, Mild Steel: 3mm Sanding Pad: 90 x 90 x 90mm
Maximum Cutting Depth: 101mm
431 Stroke length: 22mm Bevel angle range: 0-45˚ Charge life: 3-5hours
Charge life: 3-5 hours Charge life: 3-5 hours
Spare Delta Sanding paper: WL-DS01/10
Wood blade: WL-RS01W/5 Wood blade: WL-JS01W/5 Battery: WL-BA02 Charger: WL-CH02
Metal blade: WL-RS02M/5 Metal blade: WL-JS02M/5
Battery: WL-BA01 Charger: WL-CH01 Battery: WL-BA02 Charger: WL-CH02

MET

DRILLS & TAPS

High speed Drills (DIN338) High speed Drills SDS Plus SDS Max

Yellow Steel Drills Masonary Drills (ZN-Plated) 1st Req 1st,2nd&3rd Masonary Drills (ZN-Plated)
Cut
Size Ø Code Length Code Length Code Length Taps Drill Cut Taps Length
Pack size (mm) (mm) (mm) Size (Set) Size Ø Code (mm)

Pack of 10 Pack of 5 Each Each Set of 3 Each

1.0 HSS-1 34 16.0 BP-C16-340 340

1.5 HSS-1.5 40 16.5
2.0 HSS-2.0 49
17.0

2.5 HSS-2.5 57 17.5
3.0 HSS-3.0 61
MAS-3/5 60 TAP-3/1 2.5 TAP-3/3 18.0 BP-C18-340 340

3.2 HSS-3.2 65 18.5
3.5 HSS-3.5 70
4.0 HSS-4.0 75 MAS-4/5 75 BP-C4-160 160 20.0 BP-C20-340 340
4.2 HSS-4.2 75 TAP-4/1 3.2 TAP-4/3 20.5
4.5 HSS-4.5 80
22.0 BP-C22-340 340

22.5

5.0 HSS-5.0 86 MAS-5/5 85 BP-C5-160 160 TAP-5/1 4.2 TAP-5/3 24.0 BP-C24-340 340
5.5 HSS-5.5 93 Each BP-C5.5-160 160 24.5

6.0 HSS-6.0 93 MAS-6 100 BP-C6-160 160 TAP-6/1 5.0 TAP-6/3 25.0 BP-C25-570 570
6.5 HSS-6.5 101 25.5

6.8 HSS-6.8 109 28.0 BP-C28-570 570
28.5
Pack of 5

7.0 HSS-7.0 109 MAS-7 120 30.0 BP-C30-570 570
7.5 HSS-7.5 109
8.0 HSS-8.0 117 30.5
8.5 HSS-8.5 117
9.0 HSS-9.0 125 MAS-8 120 BP-C8-160 160 TAP-8/1 6.8 TAP-8/3 32.0 BP-C32-570 570
9.5 HSS-9.5 125
10.0 HSS-10.0 133 32.5
10.2 HSS-10.2 133
11.0 HSS-11.0 142 35.0
12.0 HSS-12.0 151
13.0 HSS-13.0 151 35.5
14.0 HSS-14.0 160
MAS-10 120 BP-C10-210 210 TAP-10/1 8.5 TAP-10/3 37.0
37.5

38.0

MAS-12 150 BP-C12-210 210 38.5

40.0

MAS-14 150 BP-C14-210 210 40.0

SETS Tap & Die Set

Twist Drill Sets

10 13 19 25 16 TEST INSTRUMENTS, TOOLS & GENSETS
Pcs Pcs Pcs Pcs Pcs

Code TX-H1001 TX-H1302-1 TX-H1902-1 TX-H2502 TX-0802

Size: 1 to 10mm 1.5 to 6.5 1.0 to 10.0mm 1.0 to 13.0mm Tap & Die Size:
(1mm Increments) (0.5 Increments) (0.5mm Increments) (0.5mm Increments) M3, M4, M5, M6, M7, M8, M10, M12
+ 3.2 & 4.8mm
1 x Tap Wrench / 1 x Die Handle

Jigsaw Blades Tap Wrench Masonary Drill Set Impact Chisel

M1-M8 Code Description

5 Pcs M3-M12 4 Pcs MI-F25-280 280(L) x 25(B)mm Chisel
Code Description For Size Drill Sharpener
T118A For Metal M1-M8
Code Length M3-M12 Code Description Code Description
1-3mm D312-001 125mm
D312-003 200mm TX-M402-1 4, 5, 6, 8mm Ø SND401 Drill
ZN-Plated SND-STONE Spare Stone

For Drills 3.6 -10mm Ø

MET 432

HOLE SAWS

Fixed Hole Saws Bi-Metal Hole Saws Arbors
For use with HS Hole Saws
• H igh Speed Bi-Metal Edge
welded to alloy steel for
heavy duty cutting

Size Ø (mm) Size Ø (Inches) Code Code HAS-02

16 5/8” − HS-16 • Shank Size: 3/8” Hex
20 25/32” TX-20 HS-20 • Thread Size: 1/2”
22.5 7/8” HS-22.5 • Fits to 16 - 30mm Hole Saw
25 1” TX-22.5 HS-25
29 11/8” HS-29 HAS-04
30 11/16” TX-25 HS-30 • Shank Size: 7/16” Hex
32 11/4” − HS-32 • Thread Size: 5/8”
35 13/8” TX-30 HS-35 • Fits to 32 - 76mm Hole Saw
38 11/2” − HS-38
40 19/16” − HS-40 Ø Size (mm)
44 13/4” − HS-44 6.35 x 73
48 17/8” − HS-48 1/2” - 5/8”
51 2” − HS-51
54 21/8” − HS-54
57 11/4” − HS-57
60 23/8” − HS-60
64 21/2” − HS-64
73 27/8” − HS-73
76 3” − HS-76
−
HSD-01 −
Accessories
HSD-02
Code Description

HSD-01/10 10pcs Spare Drill Bit for HAS-02 & HAS-04
HSD-02 Adaptor for different Arbor Thread Size

9 Piece Hole Saw Kit 16 Piece Hole Saw Kit

Code HSD-04 Code HSD-16
Includes 6 x Hole Saws: Includes
20mm (25/32”), 25mm (1”), 12 x Hole Saws:
32mm (1¼”), 40mm (19/16”), 19mm (3/4”), 22mm (7/8”),
51mm (2”), 64mm (21/2”) 29mm (11/8”), 32mm (11/4”),
38mm (11/2”), 44mm (13/4”),
2 x Arbors to fit Hole Saw: 51mm (2”), 64mm (21/2”),
1/4” Hex to fit 16 - 30mm 76mm (3”), 89mm (31/2”),
7/16” Hex to fit 32 - 210mm 102mm (4”), 127mm (5”)
1 x Adaptor 1/2” - 5/8”
2 x Arbors
3/8” & 1/4 Hex with one 6mm
pilot drill & 2.5mm allen key

1 x Drive plate

Drill Bit Kit - 101 Piece Kit

Code LB-013

Includes 19pcs - Hss Drills 1pc - Counter Sinking Bit 10pcs - Nut Drivers
3pcs - Hss drills with Hex Shank 3pcs - Screw Finder 15pcs - 50mm Driver Bits
TEST INSTRUMENTS, TOOLS & GENSETS 4pcs - Hole Saw 22pcs - Miscellaneous Driver Bits 1pc - Magnetic Bit Holder
5pcs - Flat Wood Drills 6pcs - Masonry Drills
6pcs - Wood Drills 4pcs - Drill Stopper

3M COMFORT GRIP GLOVES PROTECTION GOGGLES

Comfort Grip Gloves

Code Includes Code SB216040

WX300921193 Large

WX300921201 Xtra-Large

Characteristics
• Exceptional comfort and breathability: Thin foam coating

provides high breathability for maximum comfort.
• Fine gauge knit nylon liner provides flexibilty and padding
• High Durability: Unique nitrile formula offers resistance to
P3 abrasion. Machine washable

433 MET

POWER TOOL ACCESSORIES - ABRASIVES

Superflex Standard Cutting Wheel - Metal - Specification: AS30S B27 F2

Code DIA. Thickness Hole Size Shape Max Speed Box QTY
M/Sec RPM 25
25
GTCW0001 115 3.0 22.2 41 Flat 80 13280 25
GTCW0002 125 3.0 25
GTCW0003 150 3.0 22.2 41 Flat 80 12280 25
GTCW0004 180 3.0
GTCW0005 230 3.0 22.2 41 Flat 80 10190 Box QTY
10
22.2 41 Flat 80 8600

22.2 41 Flat 80 6600

Superflex Quality Cutting Wheel - Metal (Light Duty Machines 2kw or Less)

Specification: AS30R BF2E

Code DIA. Thickness Hole Size Shape Max Speed
GTCW0006 M/Sec RPM

350 3.0 25.4 41 Flat 80 4100

Superflex Standard Cutting Wheel - Stone
Specification: CS302 B40 F2 (Mainly Used For Wall Chasing)

Code DIA. Thickness Hole Size Shape Max Speed Box QTY
M/Sec RPM 25
25
GTCW0009 115 3.0 22.2 41 Flat 80 13280 25

GTCW0011 125 3.0 22.2 41 Flat 80 12280 Box QTY
25
GTCW0013 230 3.0 22.2 41 Flat 80 6600 25
25
Superflex Slimline Cutting Wheel - Metal & Stainless Steel (2 in 1)
Box QTY
Specification: A46T BF 25
25
Code DIA. Thickness Hole Size Shape Max Speed
M/Sec RPM
GTCW0014
GTCW0017 115 1.0 22.2 T41 Flat 80 13280
GTCW0019
125 1.0 22.2 T41 Flat 80 12280

230 1.9 22.2 T41 Flat 80 6600

Superflex Slimline Cutting Wheel - Multi-Purpose - Specification: C60T BF

Code DIA. Thickness Hole Size Shape Max Speed

GTCW0021 T41 Flat M/Sec RPM
GTCW0022 80 13280
115 1.0 22.2

230 1.9 22.2 T41 Flat 80 6600

Superflex Standard Angle Grinding Wheel - Metal - Specification: C60T BF

Code DIA. Thickness Hole Size Shape Max Speed Box QTY
M/Sec RPM
GTCW0026
GTCW0032 115 6.4 22.2 27 D/CT 80 13280 10

230 6.0 22.2 27 D/C 80 6600 10

Counter Display Box Superflex Slimline - Specification: A46T (Mild Steel and Stainless Steel)

Code DIA. Thickness Hole Size QTY Description
1.0 22.2 200PCS 40 Packs of 5, c/w retail box
GTCW0014/RET 115

Sold in packs of 5 per pack

Counter Display Box Superflex Slimline - Specification: C60T (Multi-purpose)

Code DIA. Thickness Hole Size QTY Description

GTCW0021/RET 115 1.0 22.2 200PCS 40 Packs of 5, c/w retail box
Sold in packs of 5 per pack

Industrial Flap Discs Professional Light Duty
Diamond Disks
Code DIA. Hole Grit Box QTY
GTFD0030 115 22 AZ40 TEST INSTRUMENTS, TOOLS & GENSETS
GTFD0031 115 22 AZ60 10
GTFD0032 115 22 AZ80 10
GTFD0033 180 22 AZ60 10
10
Hole
DIY Flap Discs 22 Code dxD(mm)
22
Code DIA. 22 Grit Box QTY DP-18580500 22.2 x 115
GTFD0034 115 AZ40 10 DP-18580520 22.2 x 230
GTFD0035 115 Thickness AZ60 10
GTFD0036 115 2.2/7 AZ80 10 Professional Medium Duty
2/7 Diamond Disks
2.2/7
DIY Diamond Saw Blades

Code DIA. Hole Size Box QTY Code dxD(mm)
GTCW0040 115 22.23 1
GTCW0041 125 22.23 1 DP-18570012 22.2 x 15
GTCW0042 230 22.23 1 DP-18570042 22.2 x 230

MET 434

Core Drilling Machines c/w Stand CORE DRILLING MACHINE Water Swivel Adaptor

Core Drill Bits

Code R1011 R1721 RC35-* RC70-* Water Swivels
Supply 220-240VAC 220-240VAC
Watts 1/2" Box Thread 1 1/4" UNC Thread Fits a standard ½” chuck
Shaft Speed 1100W 1700W
Core Bit Type 970rpm 450/900rpm * Add size to code: * Add size to code: Allows wet core drilling using
Bit Sizes RC35
Output Shaft Thread 60-120mm RC70 20mm (ID: 15mm L: 400mm) 52mm (ID: 44mm L: 450mm) RC35 core bit
Weight ½” Box 40-300mm
6.1kg 1¼ UNC 25mm (ID: 20mm L: 400mm) 67mm (ID: 59mm L: 450mm) Capacity: 12 - 77mm Diameter

18.2kg 32mm (ID: 27mm L: 400mm) 109mm (ID: 101mm L: 450mm) No hammer action required

52mm (ID: 46mm L: 400mm) 117mm (ID: 109mm L: 450mm)

Suitable for wet drilling of reinforced concrete/masonary

DIESEL GENERATOR LIGHT TOWER

Diesel Powered Generator Light Towers

Code NDG5LT NDG9PLT

Generator Specifications 9
39.1A
NDG5LT Rated kW 4.2 Electric
2x50W Rated Current 18.3A 3 Cylinder, 4 Stroke, Water cooled
LED 29.5hrs
Start Electric
NDG9PLT 1153050l
4X1kw Engine Single Cylinder, 4 Stroke, Air cooler
Halogen Running time (full load) 15hrs 1131
GEN Regulated RPM 2784 x 1360 x (2170 / 8500)
Fuel Tank 31060l0
435 1150kg
Displacement CC 418 66dB
Size (LxWxH) 2000 x 1100 x (1200 / 6000) Deep Sea 3110 controller
Weight (Net)
Noise at 7m 280kg
71dB

Standard Items Oil warning, Voltmeter, Fuel Gauge

TEST INSTRUMENTS, TOOLS & GENSETS Light Tower Specifications 2 x 50Watt LED 4 x 1kW Halogen
Illuminating Power 11000 100000
Lumens 5.5m 8.5m
Tower Max height 3 8
No. Of Mast Sections 9s / 13s 12s / 18s
Raise / Lower times Hydraulic
Mast Extension Hydraulic 359º
Tower Rotation 359º 0-90º
Light Tilt Angle 0-90º

Solar LED Lighting Trolley

Code SOL-TRL-2X30W

LED Light 12V 30W LED x 2 Operation Time 12 Hours (Full Charge)
12V
Luminous Flux 2800lm x 2 System Voltage 350kgs
2.2 (L) x 1 (W) x 1.8 (H)
Solar Panel 140W x 2 Weight Folding System with Easy Lock
Fuse and Isolator
Battery 100AH x 2 Dim/Fold (m)

Mast 3.5m Solar Panel Set Up

Control System Auto on and off Protection

Rental Unit

Code SOL-TRL-2X30W/RENT

Daily Rental Charge for SOL-TRL-2x30W

MET Warrantee on Generators: 1 Year / 1000 Hours,
whichever comes first.

Warrantee on Generators: 1 Year / 1000 Hours, whichever comes first.

NREAWNGE DIGITAL GENERATORS - 230VAC - PETROL

Sine wave digital inverter generating sets
A new generation of sine wave inverter generating sets with micro processor control. After signal
processing a high quality pure sine wave can be acquired with high frequency LC filtering. This type of
generator has no waveform distortion offering pure sine wave power with high power factor for instant
high loading capacity. A wide range of application areas can be readily assured such as household
appliances, computers and communication equipment, medical equipment and other precision
instruments. Easy carrying, low noise and "smart fuel saving" features make these generators ideal for
household, outdoor and camping requirements.

NIG1000 NIG2000 NIG2600 NIG3000E NIG5600E

Code NIG1000 NIG2000 NIG2600 NIG3000E NIG3600E NIG5600E

Rated Output kVA 0.9 2 2.6 2.6 3 5.0
Rated current 3.9A 8.7A 13A 21.7
Start Recoil Recoil 11.3A 11.3 Electric Electric+Recoil
DC Output 12V/ 5A 12V/ 8.3A 12V/ 8.3A 12V/ 8.3A
DC Protector Yes Yes Recoil Electric+Recoil Yes Yes
AC O/L Yes Yes Yes Yes
Engine 12V/ 8.3A 12V/ 5A
Fuel Tank 2.7l 4.5l 12l 16l
Displacement CC Yes Yes
Run Time ¾ Loading (Hrs) 53 125 296 389
Normal Running Speed (RPM) 6 6.5 Yes Yes 7 8.5
Size LxWxH(mm) 5500 5000 2000-6000 3600
Weight (Net) 480 x 260 x 410 555 x 305 x 510 Single Cylinder, 4-Stroke, Air Cooled 680 x 480 x 580 750 x 550 x 780
Noise Level (7m) 13kg 27kg 66kg 90kg
Standard Items 58dB 65dB 7l 7l 66dB 68dB
Wheels
- - 149 149 Yes Yes

6.5 6

3100-5000 5000

620 x 370 x 540 370 x 230 x 320

29kg 9kg

58dB 58dB

AC/DC Circuit protectors, Indicator Light

- Yes

NREAWNGE ECO-FRIENDLY OPEN FRAME (PETROL)

ATS Available for Features
selected models • Engine designed to have low
(to be ordered fuel consumption
separately) • Advanced design of alternator
and cooling system provide
NECO2990E Rear View NECO3990E TEST INSTRUMENTS, TOOLS & GENSETS
longer life at high temperatures
Code 230V Single Phase 400V 3 Phase • Powerful heavy duty engines
built to meet stringent
Rated Output kVA/kW NECO2990E NECO3990E NECO7990E NECO8990E NECO8990TE
Rated Current (A) European and US emmission
Starting 2.0 / 1.7 2.6 / 2.3 5.0 / 4.2 6.0 / 5.5 7.5 / 6.3
12VDC O/P Rated Current controls for generators
Engine Type 8.7 11.4 21.7 27.7 10.9 • Low noise due to new design of
Fuel Tank Recoil/Electric Recoil/Electric Recoil/Electric Recoil/Electric Recoil/Electric silencer made of Al coated
Displacement CC
Run Time ¾ Loading (Hrs) - - 8.3 8.3 8.3 steel producing <2dB less
Normal Running Speed (RPM)
Size LxWxH (mm) Single Cylinder, 4-Stroke, Air Cooled exhaust noise compared to
Dry Weight
Noise Level (7M) 13l 13l 26l 26l 26l normal exhaust system
Standard Items • Easy starting with electric
Wheels 163 196 389 439 439 starter supplied with
ATS Code
11 10 9.5 8.5 8.5 maintenance free battery
3000 • Water proof control panel fitted
with electromagnetic/pneumatic
597x465x488 597x465x488 945x594x680 945x594x681 945x594x681
circuit breaker
50kg 59kg 96kg 103kg 103kg • Airless flat free wheels

66dB 66dB 70dB 70dB 70dB 436
4-in-1 Digital monitor (hour meter, frequency, oil warning, voltage meter)

Yes

- - - SATS1P36/2P SATS3P18/4P

GMENT

Warrantee on Generators: 1 Year / 1000 Hours, whichever comes first.

SINGLE PHASE PETROL GENERATORS - 230VAC

ATS-6.6KW-SP NPG2500 NPG6500 NPG12010E NAC3000E2
ATS Available for selected models
(to be ordered separately)

Code Petrol Open Frame AC King Series

NPG2500 NPG3800 NPG6500E1 NPG6500 NPG12010E NAC2500E2 NAC3000E2 NAC5000E2 NAC8500E2

Rated Output kVA/ kW 2.0 / 1.7 2.8 / 2.3 5.0 / 4.25 5.0 / 4.25 8.5 / 7.2 2.0 / 1.7 2.5 / 2.1 4.0 / 3.4 6.0 / 5.1

Rated Current (A) 8.7 12.2 21.7 21.7 37 8.7 10.8 17.4 26.1

Starting Recoil Recoil Electric+Recoil Recoil Electric+Recoil Electric+Recoil Electric+Recoil Electric+Recoil Electric+Recoil

12VDC O/P Rated Current 8.3A 8.3A 8.3A 8.3A 8.3A 8.3A 8.3A 8.3A 8.3A
Engine Type 15l Single Cylinder 4-Stroke VTwin 4-Stroke Single Cylinder 4-Stroke
Fuel Tank Air Cooled 25l
Air Cooled Air Cooled
25l 40l 13l
25l 25l 13l 25l

Displacement CC 163 196 389 389 688 163 196 337 439

Run Time ¾ Loading (Hrs) 15 17.5 10 10 9 15 11.5 12 7.5

Norm Run Speed (RPM) 3000

Size LxWxH (mm) 610x460x460 610x460x460 700x525x560 700x525x560 910x650x846 624x445x435 624x445x435 734x535x557 734x535x559

Dry weight 41kg 62kg 81kg 84.3kg 175kg 60kg 62kg 95kg 107kg

Noise Level (7m) 68dB 68dB 72dB 72dB 78dB 66dB 66dB 70dB 70dB

Standard Items Fuel Gauge, Voltmeter, Circuit breaker, AVR, Battery (electric start only) Fuel Gauge, Circuit Breaker, Battery,
Digital Display (Voltage, Frequency, Timer & Oil Pressure)

ATS Code - - ATS-6.6KW-SP - SATS1P50/2P - - - -

Wheels Incl. Incl. Incl. Incl. Incl. Incl. Incl. Incl. Incl.

SINGLE PHASE DIESEL GENERATORS - 230VAC

Auto Transfer Switch

NDG4000CLE NDG3500SE NDG9F NDG17FS SKX2-80/4P

Code Diesel Open Frame NDG9F Diesel Silent NDG17FS
NDG2500CLE NDG4000CLE NDG5500CLE NDG3500SE NDG5000SE

Rated Output kVA/kW 1.8 / 1.5 3.0 / 2.5 4.6 / 4.0 8.0 / 6.8 2.8 / 2.3 4.2 / 3.6 15.0 / 12.8
34.8 65.2
Rated Current (A) 7.5 13 20 12.2 18.3
Electric Electric
Starting Electric+Recoil Electric+Recoil Electric+Recoil 8.3A Electric Electric+Recoil N/A

12VDC 0/P Rated current 8.3A 8.3A 8.3A 3 Cylinder 8.3A 8.3A 4 Cylinder 4-Stroke
Water Cooled Water cooled
Engine Type Single Cylinder 4-Stroke Single Cylinder 4-Stroke
42l 42l
TEST INSTRUMENTS, TOOLS & GENSETS Fuel Tank Air Cooled Air Cooled
1357 2545
12.5l 12.5l 12.5l 10 15l 15l 10
1500 1500
Displacement cc 219 306 418 1750 x 790 x 1070 306 418 1570 x 780 x 1050
402kg 750kg
Run Time ¾ Load (Hrs) 14 9 6.5 85dB 12 10 65dB

Normal Running Speed (RPM) 3000 HGM6120U 3000 HGM6120U
Engine Controller Engine Controller
Size LxWxH (mm) 645 x 475 x 550 710 x 475 x 650 745 x 685 x 700 950 x 550 x 743 950 x 550 x 744

Dry weight 54kg 70kg 105kg 150kg 180kg

Noise Level (7m) 80dB 82dB 85dB 71dB 71dB

Standard Items Fuel Gauge, Voltmeter, AC Circuit breaker, Fuel Gauge, Circuit Breaker, Battery,

Battery (electric start only) Auto Decompression Digital Display (Voltage, Frequency,
Timer & Oil Pressure

Wheels Incl. Incl. Incl. Incl. Incl. Incl. No

Auto Transfer Switch N/A N/A ATS-5KW-SD SKX2-40/2P ATS-5KW-SD ATS-5KW-SD SKX2-80/2P

ATS Features Auto Transfer Switch Panel Includes: Manual/Auto Switch, LED indication for mains power, generator power, Engine On/Off.
Only suitable for use with Navigator gensets. (To be ordered separately)

Engine Controller Included Smartgen HGM6120U: Intelligent Control & Monitoring of generator parameters, mains failure/restoration
with output for control of optional auto transfer switch.

437 GMENT

Warrantee on Generators: 1 Year / 1000 Hours, whichever comes first.

THREE PHASE GENERATORS - 400VAC

ATS-5KW-SD-3P NPG6500TE NPG6500T NDG5500CLTE NDG5000TSE

ATS Available for selected models
(to be ordered separately)

Code Petrol Open Frame Diesel Open Frame Diesel Silent
NDG5000TSE
NPG6500TE NPG6500T NPG12010TE NDG5500CLTE NDG5500TCL

Rated Output kVA/kW 6.25 / 5 6.25 / 5 10.5 / 8.5 6.25 / 5 6.25 / 5 5.25 / 4.2

Rated current (A) 9.1 9.1 15.4 8.2 8.2 7.6
Starting Electric+Recoil Recoil Electric+Recoil Recoil
12VDC O/P Rated current 8.3A Electric 8.3A Electric+Recoil
Engine type 8.3A 8.3
8.3A 8.3A
Fuel Tank Single Cylinder 4-Stroke Single Cylinder 4-Stroke Single Cylinder,
Displacement cc V-Twin 4-Stroke
25l 25l Air Cooled 12.5l 12.5l Air Cooled

389 389 40l 418 418 15l

688 418

Run Time ¾ Load (Hrs) 11.5 11.5 9 6.5 6.5 10
Normal Running Speed (RPM) 3000

Size (mm) 720 x 485 x 630 700 x 565 x 560 910 x 650 x 846 745 x 485 x 700 745 x 485 x 700 950 x 550 x 743
Dry weight 85.6kg 165kg
78.3kg 175kg 105kg 100kg

Noise Level (7m) 76dB 76dB 78dB 85dB 85dB 71dB

Standard Items Fuel Gauge, Voltmeter, Circuit Breaker, Battery (Electric Start Only) Fuel Gauge, Circuit Breaker, Digital
Display (Voltage, Frequency,
Timer & Oil Pressure)

ATS Code ATS-6.6KW-TP - SATS3P25/4P ATS-5KW-SD-3P - ATS-5KW-SD-3P
Wheels Incl. Incl.
Incl. Incl. Incl. Incl.

THREE PHASE SILENT DIESEL GENERATORS - 400VAC

Auto
Transfer
Switch

NDG21FS3 FGS100FS3

Fitted with Intelligent Control Panel (ICP) & Auto Mains Failiure (AMF) circuits. ATS: Mains Change Over Switchgear Panel to be ordered separately.

Code Diesel Ultra Silent
Rated Output kVA/kW
NDG12FS3 NDG21FS3 NDG28FS3 NDG33FS3 NDG41FS3 NDG66FS3 NDG100FS3
11 / 8.8 19 / 15 60 / 48 90 / 72
25 / 20 30 / 24 38 / 30 87 130.4
Electric Electric
Rated Current (A) 15.9A 27.5 36.2 43.5 55.1

Starting Electric Electric Electric Electric Electric TEST INSTRUMENTS, TOOLS & GENSETS

Engine Type 3-cylinder, 4-stroke, 4 Cylinder 4-Stroke

Fuel Tank Water cooled 42l Water Cooled 100l 100l

42l 80l 80l 80l 4214 6871
10 10
Displacement cc 1617 2545 2834 2856 4752 1500 1500
1900x850x1100 2400x1140x1300
Run Time ¾ Loading (Hrs) 10 10 10 10 10 1400kg 2300kg
65dB 75dB
Normal Running Speed (RPM) 1500 1500 1500 1500 1500 SKX2-100/4P SKT1-160/4P

Size LxWxH(mm) 1570x780x1050 1570x780x1050 1660x780x1050 1660x780x1050 1660x950x1050

Dry weight 685kg 750kg 900kg 990kg 1200kg

Noise Level (7m) 65dB 65dB 65dB 65dB 65dB

Auto Transfer Switch SKX2-20/4P SKX2-40/4P SKX2-63/4P

ATS Features Auto Transfer Switch Panel Includes: Manual/Auto Switch, LED indication for mains power, generator power, Engine On/Off.
Only suitable for use with Navigator gensets. (To be ordered separately)

Engine Controller Smartgen HGM6120U: Intelligent Control & Monitoring of generator parameters, mains failure/restoration
Included with output for control of optional auto transfer switch.

GMENT 438

A7000 DOMESTIC FLUSH SWITCHES & SOCKETS

Switches - 16A @ 250VAC

A7001 1 lever 1 way A7002 2 lever 1 way A7003 3 lever 1 way A7004 4 lever 1 way A7005 5 lever 1 way A7006 6 lever 1 way
A7011 1 lever 2 way A7012 2 lever 2 way - - - -

Sockets

A7008 A7400 A7401 A7402 A7403 A7405
2 x 5A socket (2x4)
1 x 16A switched 1 x 16A switched 2 x 16A switched 1 x 16A + 1 x 10A 1 x 16A + 10A Multi
Dedicated Sockets socket (2x4) socket (4x4) socket (4x4) switched sockets sockets

A7500-W A7501-W A7502-W A7500 A7501 A7502
1 x 16A switched 1 x 16A switched 2 x 16A switched 1 x 16A switched 1 x 16A switched 2 x 16A switched
socket (2x4) White socket (4x4) White socket (4x4) White socket (2x4) Red socket (4x4) Red socket (4x4) Red

Dimmers Doorbell Switch

WIRING ACCESSORIES A7033-* A7030 A7034 A7031 A7032 A7007
500W Dimmer on/off 300W Dimmer on/off
*Add Watts to code: 500W Dimmer on/off 500W Dimmer on/off 1 x 16A Spring return
500W or 800W with 1 switch with 2 switches doorbell switch

Shaver Socket Television Plates

A7010 A8040 A8042 A8047
Shaver socket TV socket SAT TV socket TV & Satellite socket

439 P4

DOMESTIC FLUSH SOCKETS & SWITCHES

Telephone / Data

6P4C 6P4C

Code A8043 A8044 A8045 A8046 A8048
Description 1 x RJ11/RJ12 2 x RJ11/RJ12 CAT 5E (RJ45) CAT 6 (RJ45) 2 x CAT 6 (RJ45)
Isolators

Code A7300 A7301 A7302 A7304 A7303 A7305
Description Stove Isolator
Stove Isolator Stove Isolator Stove Isolator 45A DP (4x4) Stove Isolator Air-Conditioning
Thermostat 32A DP with neon 45A DP with neon 32A DP (2x4) 50A 3P (4x4) Isolator

(2x4) (4x4) 20A DP (4x2)

Code A7700 A7100 A7102 A7103 A7104
Description 4 x 2 Blank Cover Plate 4x4 Blank Cover Plate 4 x 2 Surround 4 x 4 Surround
Thermostat for underfloor
Accessories heating 3600W c/w 20A
For more options
see page 5 Isolator and probe

Telephone & Data Jacks

Code A700-SW A701-SW A702-SW A703-SW PA086-6C PA087-6C GMCA27A GMCA28 GMCA29

Description 16A Switch 16A Switch 16A 16A push- Single Jack Dual Jack Single Jack Dual Jack Dual Jack WIRING ACCESSORIES
Cat 5E CAT 5E CAT 6
1 way 2 way Pushbutton button spring 6P2C 6P2C

Spring Return return for bell

Blister packed sockets and switches - Comes complete with extension box for surface mounting

Code A7001-BB A7002-BB A7003-BB A7400-BB A7401-BB A7402-BB A7403-BB
Description
1 Lever 1 Way 2 Lever 1 Way 3 Lever 1 Way 1 x 16A switched 1 x 16A Switched 2 x 16A Switched 1 x 16A + 1 x 10A
light switch light switch light switch socket (4 x 2) socket (4 x 4) Sockets (4x4) Switched sockets

P4 440

DOMESTIC FLUSH SOCKETS & SWITCHES (SILVER)

Switches - 16A @ 250VAC

A7001-S 1 lever 1 way A7002-S 2 lever 1 way A7003-S 3 lever 1 way A7004-S 4 lever 1 way A7005-S 5 lever 1 way A7006-S 6 lever 1 way

A7011-S 1 lever 2 way A7012-S 2 lever 2 way - - - -

Standard Sockets

A7400-S A7401-S A7402-S A7403-S A7405-S
2 x 16A + 1 x 10A switched 1 x 16A + 1 x 10A Multi socket
1 x 16A switched socket (4x2) 1 x 16A switched socket (4x4) 2 x 16A switched socket (4x4)
socket Doorbell Switch

Dimmers

A7033-*-S A7030-S A7031-S A7032-S A7007-S
*500W/ 800W Dimmer switch 500W Dimmer On/Off
500W Dimmer On/Off with 1 500W Dimmer On/Off with 2 1 x 16A Spring return Doorbell

switch switches switch

Television Plates

WIRING ACCESSORIES A7100-S A7102-S A7103-S A7104-S A8040-S A8042-S A8047-S
4 x 2 Blank 4x4 Blank 4 x 2 Surround 4 x 4 Surround TV SAT TV TV & Satellite
Cover Plate Cover Plate
Telephone / Data
Stove Isolators

A7300-S A7301-S A7302-S A7303-S A8043-S A8045-S A8046-S
Stove isolator 32A DP Stove Isolator 1 x RJ11/ RJ12 CAT 5E (RJ45) CAT 6 (RJ45)
Stove isolator 45A DP Stove Isolator 50A 3P (4x4)
with neon (2x4) with neon (4x4) 32A DP (2x4)
P4
441

B7000 DOMESTIC FLUSH SOCKETS & SWITCHES

Dimmer

Code B7001 B7002 B7003 B7004 B7005 B7006 B7033-*
1 lever 1 way 2 lever 1 way 3 lever 1 way 4 lever 1 way 5 lever 1 way 6 lever 1 way
*500/800W
B7011 B7012 – – – – Dimmer switch
1 lever 2 way 2 lever 2 way
Doorbell
Sockets Pushbutton

B7400 B7401 B7402 B7403 B7404 B7405 B7007

1 x 16A Switched 1 x 16A Switched 2 x 16A Switched 1 x 16A +1 x 10A 1 x 16A + 1 x 10A + 1 1 x 16A Switched 1 x 16A spring
Socket (4x2) Socket (4x4) Socket (4x4) Switched Sockets USB 5V, 500mA 2 x USB 5V/2.1A return bell-press
Outputs
Dedicated Sockets

B7500-W B7501-W B7502-W B7500 B7501 B7502

1 x 16A Switched 1 x 16A Switched 2 x 16A Switched 1 x 16A Switched 1 x 16A Switched 2 x 16A switched sockets
Socket (4x2) Socket (4x4) Sockets (4x4) Socket (4x2) socket (4x4) (4x4)

Accessories

Closed Shutter Open Shutter

B700-SW B701-SW B702-SW B700-I A702-BL A700-SAT A700-TV A700-RJ12 A700-CAT5 A700-CAT6

16A switch 16A switch Door Bell 20A DP Blank Satellite TV RJ12 CAT 5E (RJ45) CAT 6 (RJ45) WIRING ACCESSORIES
Isolator Module connection Connection Telephone
1 way 2 way Pushbutton Module Module
Module

Blank Plates with holes to accommodate accessories

A7105 A7106 A7107 A7110 A7108 A7109
4x2
4x2 4x2 4x2 4 Way 4x4 4x4
1 Way 2 Way 3 Way 2 Way 4 Way
P4
442

SP7000 DOMESTIC FLUSH SWITCHES & SOCKETS

Switches
16A @ 250VAC

*Add colour to SP7001-* 1 lever 1 way SP7002-* 2 lever 1 way SP7003-* 3 lever 1 way SP7004-* 4 lever 1 way SP7006-* 6 lever 1 way
code: W (White), SP7011-* 1 lever 2 way SP7012-* 2 lever 2 way - - -
S (Silver)

Code

Sockets

*Add colour to SP7400-* SP7401-* SP7402-* SP7403-* SP7404-*
code: W (White),
S (Silver) 1 x 16A switched socket 1 x 16A switched socket 2 x 16A switched socket 1 x 16A + 1 x 16A switched 1 x 16A + 2 x USB 5V,
Code (4x2) (4x4) 2100mA output (4x4)
Description (4x4) sockets (4x4)

Isolators

*Add colour to SP7302-* SP7304-* SP7405-* SP7406-*
code: W (White),
S (Silver) Stove Isolator 30A DP Stove Isolator 60A DP 1 x 16A + 2 x USB 5V, 2100mA 4 x USB 5V, 2 x 2100mA Output
Code (4x2) (4x4)
Description Output (4x2) (4x2)

Dedicated
Sockets

*Add colour to SP7500-W SP7501-W SP7502-W SP7500 SP7501 SP7502
code: W (White), 1 x 16A switched 1 x 16A switched
S (Silver) socket (2x4) White 1 x 16A switched 2 x 16A switched socket (2x4) Red 1 x 16A switched 2 x 16A switched
socket (4x4) White socket (4x4) White socket (4x4) Red socket (4x4) Red
Code Blank
Description Plates

Sockets
British Type

WIRING ACCESSORIES *Add colour to
code: W (White),
S (Silver)

Code SP7900-* SP7902-* SP7100-* SP7102-*
Dimmers 2x4 4x4
1 x British Switched Sockets (2x4) 2 x British Switched Sockets (4x4)
Doorbell Switch

*Add colour to
code: W (White),
S (Silver)

Code SP7033-*-* SP7030-* SP7031-* SP7032-* SP7007-*
500W Dimmer on/off
Description Dimmer switch. *Add Watts 500W Dimmer on/off with 500W Dimmer on/off with 2 1 x 16A Spring return
to code: 500W or 800W doorbell switch
1 switch switches

443 P4

SP7000 DOMESTIC FLUSH SWITCHES & SOCKETS

Switches and Sockets marked with -* are available in both White and Silver finishes. See below for some examples of the Silver finish

Code SP7001-S 1 lever 1 way SP7002-S 2 lever 1 way SP7003-S 3 lever 1 way SP7004-S 4 lever 1 way SP7006-S 6 lever 1 way

SP7011-S 1 lever 2 way SP7012-S 2 lever 2 way - - -

Code SP7400-S SP7401-S SP7402-S SP7403-S SP7404-S
Description
1 x 16A switched socket 1 x 16A switched socket 2 x 16A switched socket 1 x 16A + 1 x 16A switched 1 x 16A + 2 x USB 5V,
Isolators (4x2) (4x4) (4x4) sockets (4x4) 2100mA output (4x4)

Code SP7302-S SP7304-S SP7405-S SP7406-S
Description
Stove Isolator 30A DP Stove Isolator 60A DP 1 x 16A + 2 x USB 5V, 2100mA 4 x USB 5V, 2 x 2100mA Output
Spare Steel (4x2) (4x4)
Cover Plates Output (4x2) (4x2)

*Add colour to SP7105-* SP7106-* SP7107-* SP7108-* SP7110-*
code: W (White), For SP7001 For SP7002 For SP7003 For SP7004 For SP7006
S (Silver)
Code SP7109-* SP7111-* SP7103-* SP7104-* SP7101-*
Description For SP7900 For SP7902 For SP7400 For SP7401 For SP7402

Spare Steel
Cover Plates

*Add colour to
code: W (White),
S (Silver)

Code
Description

3X3 WALL BOXES

Galvanised Steel Flush Mount

Code TM-SG135 TM-SG147 TM-SG235D TM-SG247 TM-SG335 TM-SG335D WIRING ACCESSORIES
Description 3x3x3
3x3 3x3 2x3x3 6x3 1x3x3 + 1x6x3
71 x 71 x 35mm 71 x 71 x 47mm 151 x 71 x 35mm 131 x 71 x 35mm 248 x 71 x 35mm 215 x 71 x 35mm

Plastic Flush Mount Plastic Surface

Code BEL-B1 BEL-C1 BEL-B2 BEL-C2
Description 6x3
3x3 3x3 6x3
75 x 75 x 37mm 132 x 72 x 37mm 86 x 86 x 30mm 148 x 88 x 32mm

P4 444

3 X 3 SOCKETS & SWITCHES

Code EF90011C EF90021C EF90051C EF90071C EF90151C
2-Way Switch 10A Pushbutton 10A
Description Single Lever SP Switch 10A Single Lever DP Switch 10A Intermediate Switch 10A

Code EF90061C EF90101C EF90088C EF90159C EF90031C
Description 2-Lever Switch 10A 2-Lever 2-Way Switch 10A 3-Lever Switch 10A Card Switch 10A
Pushbutton + 2-Way Switch
10A

Code EF90092C EF90211C EF90212C EF90402C EF90401C EF90560
Dimmer Switch (500W) TV/ Satellite Socket
Description Pull Cord Switch 10A Electronic Dimmer Switch 400W 1000W
(320W)
Motion Detector

Code EF90142C EF90111C EF90632C EF90185CBR EF90184C

Description Euro/ USA Earth Socket French Earth Socket 16A Schuko Earth Socket 16A British Earth Socket 13A Switched Single British
16A Earth Socket 13A

Code EF90344C EF90453C EF90455C EF90252C EF90253C
Description
Switched Double British RJ45 CAT5e Computer RJ45 CAT6 Computer RJ11 (4-Pin) Telephone RJ12 (6-Pin) Telephone
Earth Socket 13A Socket Socket Socket Socket

WIRING ACCESSORIES Code EF37131C EF10976A BEL-B1 GW24232 GW24233
Description Surface Socket 16A Surface Mounting Box Flush Mounting Box Flush Mounting Box Spacer

Code EF90920T EF90930T EF90940T EF90950T
Description Double Frame Triple Frame 4-Gang Frame 5-Gang Frame

445 P4

3 X 3 SOCKETS & SWITCHES

White K750L1-1 K750L2-1 K750L3-1 K750L4-1
Series K750L1-2 K750L2-2 K750L3-2 K750L4-2

Code 1 Way
Code 2 Way

Code K750-L1B K750-1TG K750-16U K750-1TS K750-1TVS K750-1TE
Description Bell Push Satellite TV Socket Tel Socket
Dimmer Switch Schuko Socket Fan Control
250W Outlet 250W

Code K750-1RJ K750-13UK K750-13UK-2 K750-15UK K750-20L1 K750-45L1
Description Data Socket 13A BS Switched 20A DP Isolator 45A DP Isolator
2 x 13A 1 x 3 Pin
Socket BS Switched Socket SA Switched Socket with Neon with Neon

Code K750-45L1-C K750-1ETK K750-DCLB K750-1 K750-2
Description Cooker Control Unit 30A Key Switch Hotel Doorbell Switch 3 x 3 Blank Plate 3 x 6 Blank Plate

Stainless
Steel
Series

Code V16-1G1 1 Lever 1 Way V16-2G1 2 Lever 1 Way V16-3G1 3 Lever 1 Way V16-4G1 4 Lever 1 Way V16-BSSL

V16-1G2 1 Lever 2 Way V16-2G2 2 Lever 2 Way V16-3G2 3 Lever 2 Way V16-4G2 4 Lever 2 Way 13A BS Switched Socket

Code V16-2BSSL V16-15AL V16-DB V16-PB V16-5MUS
Bell Push Push Button 15A Switched Socket
Description 2 x13A BS Switched Socket 15A Switched Socket

Code V16-GM V16-45DP V16-TV V16-TE V16-2TE WIRING ACCESSORIES
Description 16A Schuko Socket 45A Isolator with Neon Single Sat TV Socket
Single Telephone Socket Double Telephone Socket

Code V16-IT V16-2IT V16-DM V16-BP V16-SV
Description Single Data Socket Double Data Socket Dimmer Switch with Neon Blanking Plate Shaver Socket

P4 446

3 X 3 SOCKETS & SWITCHES - WITH USB

Stainless
Steel

Code FST281-2U FST282-2U FST298-2U FST251-4U
Description
1x British Switched socket + 2x 2x British Switched socket + 2x 1x 16A Switched Socket + 2x USB 4x USB 5V, 5100mA (Total),
USB 5V, 2100mA (Total), (3x3) (3x3)
USB 5V, 2100mA (Total), (6x3) 5V, 2100mA (Total), (3x3)

EXIT PUSH BUTTONS Push Exit Buttons (Plastic Plates)

Touch Exit Buttons (Steel Plates) - IP65

Code SD-7204SGEX1Q SD-7104SGEX1Q SD-7195SGEX1Q SD-7295SGEX1Q A7900 A7900-S
Description Stainless Steel Plate & Pushbutton Stainless Steel Plate & Pushbutton with
Illuminated Red/Green LED (12VDC) Plastic plate & stainless steel push button
Contact NO & NC contact rated 5A @ 250VAC
NO & NC contact rated 5A @ 250VAC NO & NC contact rated 3A @ 30VAC/DC
Exit Key Slimline Plate Switches - IP65
Exit Button c/w built-in RF Transmitter - IP40 No Touch Exit Buttons - IP40

Fits LED SK-910RQ Key Set Key Set
Standard indicator RF Reciever included included
4 x 2 Box
SD-8202GT-PEQ
Code
Description (SHOWN) E-941SA-1200Q
Contact Electromagnetic Lock
Features
SD-8202GT-PEQ SD-927PKC-NEQ SD-927PWCQ SD-71051-VO SD-71002-VO
Stainless Steel single-gang or slimline plate Momentary shunt Latching shunt
Stainless Steel Plate White Plate NO & NC rated @ 1A NO & NC rated @ 1A
NO & NC contact rated 3A @ 24VDC
Powered by 9VDC (battery included) NO & NC 3A @ 12VDC

Range: up to 160m Operating voltage: 12VDC
Over 68 billion codes
Compatible with receivers: SK910 Sensing:100mm Sensing:50mm Replacement Key
Code SS-C90KN-O
infrared technology senses motion.
"Ring" illuminator turns from green to red

when sensor is activated

TELEPHONE & DATA ACCESSORIES

Telephone Cord On Hold Music Box Surge Protector Telephone Jacks ADSL Splitter ADSL Filter
2 Socket
out
RJ11

WIRING ACCESSORIES Code Length GM45-6P4C GM43 PA086-6C PA087-6C GM2059 KD2062
6P2C 6P2C 6P2C
LM79-7M 7m 6P2C Single Jack Dual Jack
LM79-15M 15m 6P2C 6P2C RJ45 Box RJ45 & RJ11
Single
Telephone Ext Lead Extension Leads Extension Leads Bell Ringer

Male/Male Male/Female Double

GM36-4P4C LM63-5 LM63-10 LM66-5 LM66-10 LM77 GMCA28 GMCA27A PA088-6C
6P2C Cat 5E Jack Cat 5E Jack
2.1 metres 5 metres 10 metres 5 metres 10 metres Phone/Cat 5E
4P4C 6P2C 6P2C 6P2C 6P2C (Data) Jack

447 P4

2X4 WALL BOXES

Open Back Closed Back Closed Back Spouted

TM-2020
Conforms
to SABS
Spec. No.
IEC60670-1

Code TM-2020 TM-42S TC-PR42 EB42 EB42C PEB42 SPEB42

Description 105.5 x 61 x 50D 105 x 65 x 45D 105 x 61 x 50D 50 x 100 Steel 50 x 100 Steel 50 x 100 Plastic 50 x 100 Plastic
Steel Flush Mount Steel Flush Mount Plastic Flush Mount Surface Mount Surface Mount Surface Mount Surface Mount

4X4 WALL BOXES

Open Back Closed Back Closed Back Spouted

TM-4040
Conforms
to SABS
Spec. No.
IEC60670-1

Code TM-4040 TM-44S TC-PR44 EB44 EB44C PEB44 SPEB44

Description 105.5 x 105.5 x 50D 105 x 105 x 45D 105 x 105 x 50D 100 x 100mm Steel 100 x 100mm Steel 100 x 100mm Plastic 100 x 100mm Plastic

Steel Flush Mount Steel Flush Mount Plastic Flush Mount Surface Mount Surface Mount Surface Mount Surface Mount

LOW VOLTAGE LIGHT BOXES & CONDUIT ACCESSORIES

Low Voltage Light Boxes and Lids

LV-BOX 2 Code Description Size (mm)
LID HxWxD
LV-BOX 1 For Low Voltage Light Box 210 x 150 x 130
LID-* *Add lid with hole size: 65, 75, 85mm. Please specify

LV-BOX 2 For Low Voltage Light Box 250 x 150 x 130

SABLID-* *Add lid with hole size: 65, 75, 85mm. Please specify

• Conforms to specification IEC/SABS 60598-1 and IEC/SABS 60598-2-2 • Fitted with fibre heat resistant barrier

Slab Boxes Screws for Wallboxes

Code Description Size (mm) Code Description
AxBxCxD
ECO45/50/55 ASB45/50/55 ECO45 Galvanised Eco slab box 450 x 400 x 220 x 115 SC4X40 4mm x 40mm WIRING ACCESSORIES
ECO50 Galvanised Eco slab box 500 x 450 x 220 x 115 screw with
ECO55 Galvanised Eco slab box 550 x 500 x 220 x 115 counter sunk
ASB45 Asbestos Eco lid head, Pack of 50
ASB50 Asbestos Eco lid 390 x 220
ASB55 Asbestos Eco lid 440 x 220 SC4X75 4mm x 75mm
490 x 220 screw with
counter sunk
head, Pack of 50

Galvanised Draw Boxes Plastic Draw Boxes

Code Size (mm) Code Size (mm)
H xW xD H xW xD

GDB62 150 x 150 x 50 PDB442 108 x 108 x 50

GDB63 150 x 150 x 75 PDB662 155 x 155 x 50
GDB92 230 x 230 x 50 PDB692 225 x 150 x 60

GDB93 230 x 230 x 75 PDB993 230 x 230 x 100

GDB122 305 x 305 x 50 PDB12123 305 x 308 x 100

GDB123 305 x 305 x 75

P4 448

COUPLING BOXES (ORDER LIDS SEPARATELY)

c/w Lid 3x3 Devices - (75x75mm)

Box Code 56100 56101 56102 56103 FJBS6504 BEL-B1 BEL-B2

Size 42.5Ø x 35mm 69 x 69 x 44.2mm 69 x 69 x 64mm 91 x 91 x 41mm 42.5Ø x 60mm 75 x 75 x 37mm 86 x 86 x 30mm

Lid Code 56100TMP 56101TMP 56101TMP 56103TMP
Size For 56100. Ø60mm For 56101. Ø90mm For 56102. Ø90mm For 56103. 100 x 100mm

For Dry Wall c/w Lid

Box Code 56100P 56101P 56102P 56103P
Size 42.5Ø x 35mm 68Ø x 41.5mm 68Ø x 61mm 107 x 107 x 45mm

Lid Code 56100PTMP 56101PTMP 56101PTMP 56103PTMP
Size For 56100P. Ø60mm For 56101P. Ø90mm For 56102P. Ø90mm For 56103P. 125 x 125mm

GEW 3x3 Devices

Code GW24403PM GW24404PM GW24406PM GW24237PM GW24282PM
Description For dry walls For dry walls For dry walls For dry walls Flush Mount for dry wall

WALL BOXES

Outdoor Utility Box with sliding lid and slot for plug cable, socket excl. Weatherproof Box c/w socket/switch IP54

WIRING ACCESSORIES

Code PSO-1 PSO-2 ASO-1 A311S A311-FB A311D A302S
16A Single Socket 16A Single Socket 16A Double Socket 32 D/P Isolator
Single Socket Outlet Double Socket Outlet Single Socket Outlet
PVC Fibre (DMC) Fibre (DMC) PVC
Fibre enclosure Fibre enclosure PVC enclosure

(DMC) (DMC)

449 P34

ENCLOSURES & SURFACE MOUNTING MODULAR COMPONENTS

Indoor Empty Enclosures IP40

Code Description Size
66 x 82 x 55
LK38001 1 Way 66 x 82 x 55
99 x 82 x 55
LK38002 2 Way 132 x 82 x 55

LK38001 LK38002 LK38003 LK38004 LK38003 3 Way

LK38004 4 Way

Weather Proof Empty Enclosures IP55

Code Description Size
66 x 82 x 65
LK34001 1 Way 66 x 82 x 65
99 x 82 x 65
LK34002 2 Way 132 x 82 x 65

LK34001 LK34002 LK34003 LK34004 LK34003 3 Way

LK34004 4 Way

Enclosures Complete with Switches

IP40 Indoor IP40 Description Weather Proof IP55
LK38801/32/35 LK38525/26
LK38801 16A 1P 1 Lever LK34831
IP55
LK34844 LK383312 LK38525 16A 1P 2 Lever LK34525
LK34831/32/35 LK34525/26 LK38832 16A Two-Way 1 Lever LK34832

LK38526 16A Two-Way 2 Lever LK34526

LK38835 16A N/O Pushbutton 1 Lever LK34835

LK38853 British 13A Switched Socket LK34853

LK343312 LK34853 LK38844 German 16A Schuko Socket LK34844
LK383312 RSA 15A Switched Socket LK343312

Switches & Sockets for use in Empty Enclosures

Code LK30571 LK30573 LK30513 LK30201 LK30212 LK30265 LK30208 LK30209
15A South African
16A 1Way Switch 16A 2Way Switch 16A N/O Push 10A Euro Socket 16A Euro- 16A Schuko 13A British
Socket
Button American Socket Socket Socket

IMPRRAONVGEED INDUSTRIAL SURFACE SOCKETS & SWITCHES

Metal
Clad
Casing

Code A701 A703 A704 - 1 Way / A705 - 2 Way A706 WIRING ACCESSORIES

16A Socket with 2 x 16A with 1 Lever 1 Way (10A) 2 Lever 1 Way
On/Off On/Off 1 Lever 2 Way (10A) (10A)

Code A707 A707 A702 A302 - 20A / A711 - 45A A712
5A Socket DP 250V
3 Lever 1 Way Isolator 45A DP 250V Isolator
(10A) with 230V Pilot Light
P4
450

WIRELESS SWITCHES

New Learning Type Switches • Frequency 433.92 MHZ • Battery life 12 months min
• 67 million codes (self learning)
• Range 50 metres (line of sight)
• Blister packed for DIY Transmitters

Code LWST-615 LWST-605 LYCT-505 LKCT-614

• On/Off, Dimmer • Two Gang wall switch • Remote transmitter • Keychain remote
• Battery 3V included • On/Off, Dimmer • On/Off, Dimmer • On/Off
• Spare battery code CR2032 • Battery 3V included • Battery 3V included • Battery 3V included
• 67 Mil. Codes (self learning) • S pare battery code CR2032 • S pare battery code CR2032 • Spare battery code
• S tick in anywhere using double • 67 Mil. codes (self learning) • 67 Mil. Codes (self learning) CR2032
• Stick in anywhere using double • 6 7 Mil. Codes (self learning)
sided tape (incl)
sided tape (incl)

Code LMST-606 LMDT-609 MDT-507 MDT-403

• Wireless magnetic door sensor • Indoor PIR sensor • Wireless PIR motion detector • Wireless PIR Movement Detector
transmitter • Detection distance adjustable • PIR & CDS combination wireless • Transmitter Range 25m
• Time delay adjustable (1~4M, 3~6M, 6~10M) detector transmitter • Detection Range 10m 110° angle
(0/2/4/8/10/20 minutes) • Angle Adjustable: H120, V45° • Detection capability: Distance up to • Battery 3 x AAA 1.5V (excluded)
• 67 mil. codes (self learning) • Adjustable darkness level 10M • Time on adj. 4 sec – 5 min
• Battery 3V included • Adjustable delay of time • Horizontal and vertical angle • C ompatible to receivers
• Spare Battery code: CR2032 (10sec. /20s/30s/60s) adjustable LCMR-1000
• Spare Battery code: CR2032 • Battery 3 x AAA 1.5V (not included) • LUX adjustable

Receivers Repeater

Distance Extender

WIRING ACCESSORIES Code LCMR-300 LCMR-1000 CMR-100 LWMR-230 LBUR-100 LEST-701

• On/Off, dimmer • On/Off only • On/Off, Dimming • On/Off only • On/Off remote control, • Extends distance from

• 3 00W (1.3A) • 1000W (4.3A) • 200W - Filament • Self-learning function max 60W 30m to 60m

min 40W resis- min 40W resis- lamps, linear or elec- wireless wall box receiver • Size: 92 x 50Ømm • RF Transmission
module • E27 Lamp holder • Low battery indication
tive load tive load tronic transformers • Compact dimension

• 3-24W - Dimmable 42 x 42 x 13mm, Max 230Watts • 67 million codes (self learning)

LED or CFL lamps • 67 Million rolling codes

• Fits into standard 4x2 or 4x4 boxes setting before ex-factory
• Size: 53 x 53 x 28mm
• Change your wall switch to
• Change your wall switch to wireless via remote control
wireless via remote control

451 P4

CODED WIRELESS SWITCHES

Plug-in Kit Wireless Door Chimes Transformer & Receiver

Existing Wall
Socket (ON/ OFF)

P ush bell button

Push bell button

YC-1000 BH0305SA-1 ML-8300 ML-7100 HDR-105

• 1 transmitter (YC-100) • 1 Transmitter and receiver • Wireless combination • Just plug and use • For 12V Halogen lamps 105W
& 1 receiver (YCR-1000) • Provides remote ON / OFF door chime • 2 pin Euro Plug • On/Off, dimmer
• Range 70m line of sight • Range 30m (line of sight)
• YCR-1000 (receiver plug) switch function • Additional socket outlet • Flashing LED indicator • C ompatible to transmitters
enables ON/OFF remote • Load at 250VAC: on chime receiver offers
switching function with multiple uses for impaired hearing YCT-100 & KCT-101
max load 1000W (5A) Resistive 300W • Spare push bell button
Inductive 200W • Spare push bell button
IP65. Code: MLT-7100 IP65. Code: MLT-7100

• Range 70m line of sight

Coded Receivers Transmitters - 12V Battery Included

Wiring: N (AC In)

L L N N
(AC In) L

AC out

CMR-1000 CMR-300 JLR-1005 YCT-100 KCT-101

• On/Off • On/Off, Dimming • Up/Down or Forward/Reverse • On/Off, Dimming • On/Off
• 1000W Resistive load • Spare battery code: WIR-12B • S pare battery code WIR-12B
• 1000W-Resistive Load • 300W-Resistive Load • For blinds/curtains • Coded 16 Channels • Coded 16 channels

DIMMERS & REMOTE CONTROLS

Industrial Dimmer • CE Approved
• 470kΩ Pot supplied
RTS38 Code Rating Size (mm) • EMC Low Noise
115 x 105 x 65
• Stainless Steel Top RTS38 230V 1400W 115 x 150 x 65 • Incandescent or Halogen Lamps
Cover RTS40 230V 5000W

• Black with Silver PULL-UP SOCKETS
Grey Trim

• 2M Cable
• 1 x On/Off Breaker
• 230VAC

Code PU-S22 PU-S22-2U PU-S13-2C2U
Description
• 2 x 16A 3Pin Socket • 2 x 16A 3Pin Socket • 2 x 16A 3Pin Socket WIRING ACCESSORIES
Size • 2 x 16A 2Pin Socket • 2 x 16A 2Pin Socket • 2 x RJ45 Ethernet Ports + 2m Pre-wired Cat5e cable
• 2 x USB Charger Ports 2.1A Total Load • 2 x USB Charger Ports 2.1A Total Load
372 x Ø100mm 423 x Ø100mm 396 x Ø100mm

Pop-Up Schuko Outlets (Export Only) Pop-Up South African Outlets

Code M102-2-SCHUKO M103-SCHUKO M102-2-SA M103-SA
2 x Schuko outlets 2 x 16A SA / 2 x 2 Pin Euro
Power outlets 2 x Schuko outlets 2 x 16A SA outlets
Data 2 x RJ45 - 2 x RJ45 -
Cut Out Ø102mm Ø102mm Ø102mm Ø102mm

P4 452

ALUMINIUM POWER SKIRTING

Aluminium Power Skirting - Finish: Natural Anodised

Code 180x65mm Code 105x65mm Description Length Ctn Qty

180x65mm BU651808-2A BU651058A Trunking 2m 4
105x65mm
BO80A BO80A Aluminium Trunking Cover 2m 12

BO80.2 BO80.2 Black PVC Cover 2m 12

(NB: Trunking Cover to be ordered separately)

Routing Components for 180 x 65mm Trunking

1m length

Code Divider End Caps Internal Angle External Angle Cover for Plane Angle Cover for T-Piece
Ctn Qty GTR60-1 BE1808.4 BI1808A BA1808A External Angle BW1808A Plane Angle BT1808A
1 1
50 5 BAO80A 1 BWO80A 1

1 1

Routing Components for 105 x 65mm Trunking

1m length

Code Divider End Caps Internal Angle External Angle Cover for Plane Angle Cover for T-Piece
Ctn Qty 1m length BE1058.4 BI1058A BA1058A External Angle BW1058A Plane Angle BT1058A
1 1
GTR60-1 5 BAO80A 1 BWO80A 1
50 1 1

Accessories for Aluminium Power Skirting 180x65 & 105x65

Socket Point Socket Point Socket Point PVC socket 10 packs
Cover Cover Cover
3 Module 4 Module 6 Module point cover
2x4 Colour: Colour:
Colour: Natural Natural for 3/4/6
Natural Anodised Anodised
Anodised Modules

BS80-53A Colour:

10 Black Socket Box Socket Box

3 Modules 2x4 3-4-6 Modules Joint Cover Alignment Pins

Code BS80-54A BS80-56A BS80-53.2 BS683 BS686 BSV080.4 BSZ65
Ctn Qty
10 10 10 10 12 10 Pack of 4

3M POWER SKIRTING PRE-GALVANIZED STEEL TRUNKING

F802-*
Single Compartment 90mmx55mmx3m

F801-*

Double Compartment 165mmx55mmx3m

F800-* Code Classic Cover 45x45 Cover Blank
Straight Cover 3m Length F800CC-* F800LA-* F800B-*

Routing Components

WIRING ACCESSORIES Code Single Comp. 90° Horizontal Horizontal Tee Vertical / Elbow Vertical / Tee End Cap Fast Clip
F802HB-* F802HT-* F802VE-* F802VT-* F802EC-* F800FC
F801EC-*
Code Double Comp. F801HB-* F801HT-* F801VE-* F801VT-* -

*Add Colour to Code: HG (Hospital Grey); WH (White); CB (Carrier Beige)

Switching Accessories Standard Dedicated 45 x 45 - see also page 457

Note: All switching
accessories to be
ordered separately.

Code CS-16A-S CS-16A-D CS-45X45 SA-F30 SA-F1 SA-F21C

453 Classic 16A Socket Outlet 45 x 45 Cradle 3-Pin SA Socket Single Switch 1M 5V, 2.1A. Module Size: 1M

P3

PVC POWER SKIRTING

185 x 50 Modular Trunking - White Material: PVC-M1 110 x 50 Modular Trunking - White 110
68
Low smoke emmission type Material: PVC-M1 75
Low smoke emmission type
90˚ Bend

185 50
86
75

Joint End Cap 68
Variable
T-Piece Variable
Outside Angle Inside Angle
T-Piece
with Triple Adaptor
for 45 X 45
reduction Series

50

Code EF16040 Ctn Qty Code EF10090 Ctn Qty

2 Metre/Length 4 2 Meter/Length 10
2m/length
Routing Components for Trunking 185 x 50 For stacking of
trunkings

2m

Code EF16041 EF16042 EF16043 EF16044 EF16045 EF16046 EF10987 EF10099 EF16971
Joint End Cap Outside Angle Cable Support Internal Divider Adaptor Clip
Description T-Piece Inside Angle Plane Angle 5
5 5 50 20m (10 Length) 48m (24 Length)
Carton Qty. 5 5 5

Routing Components for Trunking 110 x 50

Code EF10091 EF10092 EF10093 EF10094 EF10095 EF10096 EF10098
Description T-Piece Variable Inside Angle 90° Bend Joint End Cap
Carton Qty. 4 Variable Outside Angle T-Piece with reduction
4 4 4 4
44

COMPONENTS FOR TRUNKING 185 x 50 AND 110 x 50

45 x 45
modules

Code EF10986 EF10952 EF10954 EF45142S EF45132S EF45136S EF45138C EF45262C
Description 2 Gang Adaptor 4 Gang Adaptor 6 Gang Adaptor 2 Gang Euro & Schuko 16A Schuko Single Schuko Dual Schuko
USA Socket Protected (2G)
Carton Qty. c/w Plate c/w Plate c/w Plate 16A - 250V (2G) c/w cover c/w cover
20 10 10 10 10 10 10 10

Code EF45972S EF45975S EF45978S EF45988S EF45974S EF45970S EF45531S EF45550S WIRING ACCESSORIES
Description RJ11 1 Gang CAT5e RJ45 CAT6 RJ45 CAT6 RJ45 Fibre Optic Blanking Plate
UTP 1Gang UTP 1 Gang FTP 1 Gang Connector (ST) R-TV Socket R-TV Socket
Carton Qty. 5
5 5 5 55 Terminal Type Satellite
Dedicated
10 10

USB

Charger

Code SA-F30 SA-F1 EF10971 A7400 A7500 A7500-W SA-F21C
Description 3 Pin SA 1x16A RSA Socket 1x16A RSA Socket 5V, 2.1A
Carton Qty. Single Switch 1M Adaptor for 4x2 Sockets 1x16A RSA Socket Module Size: 1M
1 10 10
1 10 10 454

P3

OFFICE POLES

Single Face Office Poles with Office Poles with Telescopic Mounting Accessories
Telescopic Mounting
S/S D/S S/S D/S
For sockets and switches see the A7000
2x4 range on page 2-4, or the Gewiss B080.2 BS80-53.2 BS686
Chorus range in the Gewiss short form
catalogue. Spare 2m length PVC support frame Socket Box for 3/4/6
of cover
Accessories for 3/4/6 modules modules

CF503AA Floor Mounting Mini Office Poles
3 Module Support frame

1.5m 2m

CF504AA 70cm
4 Module Support frame 50cm

30cm

Height: 2.7m - 3.3m

CF506AA S/S CB1333 CB1384 S/S CDP50 CDP70 CDP30
6 Module Support frame
D/S 129336VA 129388VA D/S 12954VA 12976VA 12932VA
CM280310AA
Code Anodised Aluminium Single Sided Painted Aluminium with Black PVC Covers • 2 x BS686 socket
• 2 x BS686 socket boxes Double Sided • 2 x BS686 socket boxes for 3 / 4 / 6 modules boxes for 3 / 4 / 6 modules
Construction for 3 / 4 / 6 modules • 2 x support frames for 3 / 4 / 6 modules
Kit includes: • 2 x support frames for • 2 x support frames for
3 modules • 4 x BS686 socket boxes for 3 / 4 / 6 modules 3 / 4 / 6 modules
• 4 x support frames for 3 / 4 / 6 modules
• For CDP30 only
1 x BS686 and support

OFFICE POLES

1 Ceiling Extension Office Pole Kit
2
10 Code SD300 SD350 SD400 SD450
4 4500mm
3 9 7 Length 3000mm 3500mm 4000mm

Kit Comprises of

• 4 x Ceiling / Floor Flange (4) • 2 x Nail-in Anchor M6 x 55 (5)

• 1 x Jack Assembly (1) • Core (2)

• 1 x Base Plate (6) • Covers (3)

8 Service Outlet Kit

12 13 Code SDCE-500
11 Length 500mm

WIRING ACCESSORIES 4 Component Composition Code SDCC SD45
5
6 1. Jack Assembly Description Classic Outlet Kit Outlet Kit for 45 x 45 Modules
2. Core 4 Compartment Aluminum
Switching Accessories Standard 3. Core Cover PVC Note: All switching accessories are supplied separately.
Note: All switching 4. Ceiling / Floor flange ( ABS) A Single Service Outlet Kit Comprises of
accessories to be 5. Nail-In Anchor ( M6x55)
ordered separately. 6. BasePlate (abs) Location pad • 1 x Service Outlet Box (8) • 2 x Outlet Box Socket Flange (10)
7. Ceiling extension 500mm (SDCE) • 1 x Service Outlet Cover (9) • 1 x Nut (12)
8. Service outlet box (PVC) • 2 x Outlet Box End Caps (11)
9. Service outlet cover (PVC)
10. Service outlet box socket Flange
11. Service outlet box end caps
12. Nut
13. Switching Accessory

Dedicated 45 x 45 - see also page 457

Code CS-16A-S CS-16A-D CS-45X45 SA-F30 SA-F1 SA-F21C

Classic 16A Socket Outlet 45 x 45 Cradle 3-Pin SA Socket Single Switch 1M 5V, 2.1A. Module Size: 1M

455 P3