FINGER, HAND AND BODY PROTECTION SAFETY LIGHT CURTAINS IP65
Type 2 or 4 SG4 BASE SG2 BASE SG2 Extended
• According to IEC61496-1 and EIC61496-2 • High reliability • High reliability • High reliability
• Easy installation and • Easy installation and • Easy installation and
Note: For Safety Light Curtain selection alignment alignment alignment
guide see Datalogic Short Form • Cost effective solution • Cost effective solution • Cost effective solution
Catalogue
Sensing Distance 6m 19m 19m Selectable 9m or 19m
Power Supply 24VDC 24VDC 24VDC
Resolution (mm) 14mm 30mm 30mm 30mm
Controlled Height 150-1800mm 150-1800mm 150-1800mm
Response Time 10-51ms 9-28ms 8-24ms 8-24ms
Output 2 x PNP transistors 2 x PNP transistors 2 x PNP transistors
Connection Rx: M12 8-Pole, Rx: M12 5-Pole Rx: M12 8-Pole
Tx M12 4-Pole Tx: M12 4-Pole Tx: M12 4-Pole
Profile (mm)
Device Settings 32 x 37 32 x 37 32 x 37
Device Function Reset Test, Maual/Auto Restart Test, Automatic Restart Test, Manual/Automatic Restart
selection, EDM selection Selection
Plus Functions
EDM Selectable. Selectable max
distance 9m or 19m
Controlled Height/Beams SG4-14-015-OO-E SG4-30-015-OO-E SG2-30-015-OO-X SG2-30-015-OO-E-C
150mm
300mm SG4-14-030-OO-E SG4-30-030-OO-E SG2-30-030-OO-X SG2-30-030-OO-E-C
450mm
600mm SG4-14-045-OO-E SG4-30-045-OO-E SG2-30-045-OO-X SG2-30-045-OO-E-C
750mm
900mm SG4-14-060-OO-E SG4-30-060-OO-E SG2-30-060-OO-X SG2-30-060-OO-E-C
1050mm
1200mm SG4-14-075-OO-E SG4-30-075-OO-E SG2-30-075-OO-X SG2-30-075-OO-E-C
SG4-14-090-OO-E SG4-30-090-OO-E SG2-30-090-OO-X SG2-30-090-OO-E-C
SG4-14-105-OO-E SG4-30-105-OO-E SG2-30-105-OO-X SG2-30-105-OO-E-C
SG4-14-120-OO-E SG4-30-120-OO-E SG2-30-120-OO-X SG2-30-120-OO-E-C
^Units with even longer controlled heights available on request. For safety accessories see pages 322-323
CABLES FOR ALL SAFETY LIGHT CURTAINS
Cables - for SG4 BASE, SG2 BASE & SG2 EXTENDED Cables - for SG2 MUTING & SG4 EXTENDED
LIMIT & PRESSURE SWITCHES & SENSORS Light Curtain Series Transmitter Cable Code Description Light Curtain Transmitter/Reveiver Pigtail Cable/ Length
Series Main Connector Interface Code
SG4 BASE CS-A1-02-U-03 4 Pole 3m Cable
CS-A1-02-U-05 4 Pole 5m Cable SG2 MUTING Transmitter CS-G1-50-B-002 0.2m
(SG4-xx-xxx-OO-X)
(SG2-30-xxx-OO-W) Receiver CS-G1-70-B-002 0.2m
SG2 BASE Transmitter 0.2m
SG4 EXTENDED CS-G1-50-B-002
(SG2-xx-xxx-OO-X) Receiver Blanking Configuration 0.2m
(SG4-xx-xxx-OO-P)
SG2 EXTENDED CS-G1-70-B-002
(SG2-xx-xxx-OO-E-C)
The above cables are also used with single beam safety sensors Muting Configuration
CS-R1-75-B-002 0.2m
Light Curtain Series Receiver Cable Code Description Receiver
SG2 BASE CS-A1-06-U-03 8 Pole 3m Cable Dongle
CS-A1-06-U-05 8 Pole 5m Cable
(SG2-xx-xxx-OO-X) Receiver SG4-DONGLE -
SG2 EXTENDED
(SG2-xx-xxx-OO-E-C) CS-A1-03-U-03 5 Pole 3m Cable Note: 1) The light curtain is sold without pigtail cables: they must be ordered
CS-A1-03-U-05 5 Pole 5m Cable
SG4 BASE separately for Transmitter and Receiver. 2) For SG4 EXTENDED, the pigtail
cable used determines if the light curtain will work in Muting configuration or
(SG4-xx-xxx-OO-E) in Blanking configuration. If, in place of the pigtail cable, the Dongle is used
for receiver, the light curtain can work in both configurations. When muting
Note: All cables have axial connectors and blanking are not needed, Dongle or pigtail cable CS-G1-70-B-002 are
Note: The Cable Chart is also to be used with SG2-B/E-50/90 on page 319 suggested. 3) If SG4 EXTENDED receiver is connected to the programming and
monitoring interface (DONGLE), the pigtail cable for Receiver isn’t needed.
Axial Radial
Cable Connectors
317 DAT
PROGRAMMABLE, MUTING AND BLANKING TYPES IP65
SG4 Extended Programable*** SG2-M-30 Muting Type 2 or 4 SG Body Compact SG Body Compact
SERIES Base Muting
• State of the art technology
• Complete diagnostics and • According to IEC61496-1 & • Intergrated muting lamp
online monitoring EIC61496-2 • L and T muting models
provided with
Note: For Safety Light retroreflective
Curtain selection guide muting arms
see Datalogic Short
Form Catalogue
7m (14mm) 20m 20m Sensing Distance 50m 50m (SG-S) 3m (SG-T/L)
24VDC 24VDC Power Supply 24VDC 24VDC
14mm 30m 30mm No. of beams 2-3-4 2-3-4
300-1800mm 300-1800mm Resolution (mm) 500-800-900-1200mm 500-800-900-1200mm
No coding 15-33ms, coding 20-65ms 13-22ms Controlled Height 500-800mm (L or T models)
2 x PNP/NPN configurable 2 x PNP transistors Response Time 14-16ms 14-16ms
Rx: M12 12-Pole+M12 5-Pole for Rx: M12 12-Pole+M12 5-Pole Output 2 x PNP transistors 2 x PNP transistors
muting; M12 12-Poles for blanking,Tx: Tx: M12 5-Pole Connection Rx: M12 8-Pole Rx: M12 8-Pole+M12 5-Pole
M12 5-Pole Tx: M12 4-Pole Tx: M12 4-Pole+M12 5-Pole
35 x 41 (ZERO DEAD ZONE) 35 x 41 (ZERO DEAD ZONE) Profile (mm) 35 x 40 35 x 40
Basic Configuration Mode (BCM)* Basic Configuration Mode (BCM)* Device Settings Dip-switches, present on the Dip-switches, present on the
Advanced Configuration Mode (ACM)** Receiver Guarantee rapid Receiver Guarantee rapid
Reset, Restart selection, Alignment, Test, Manual/Auto Restart Selection, and safe device settings and safe device settings
EDM, Test, Muting, Partial Muting, EDM selection, Configurable Device Function Test, Manual/Auto Restart One-way/Two-way Muting.
Override, Coding, Range reduction, Muting, Range Reduction selection. EDM Test Manual/Auto Restart
Fixed Blanking, Floating Blanking, Reduction Range, Alignment Aid
Cascade, PNP/NPN output, GUI Plus Functions selection. Muting time-out
programming selection, EDM selection
override
Controlled Height/Beams For safety accessories see pages 322-323
500mm 2Beam SG2**-S2-050-PP-E SG2**-S2-050-PP-W
800mm 3Beam SG2**-S3-080-PP-E SG2**-S3-080-PP-W
900mm 4Beam SG2**-S4-090-PP-E SG2**-S4-090-PP-W
-- 1200mm 4Beam SG2**-S4-120-PP-E SG2**-S4-120-PP-W
SG4-14-030-OO-P SG4-30-030-OO-P SG2-30-030-OO-W L Muting 515mm 2Beam SG2**-L2-050-PP-W
SG4-14-045-OO-P SG4-30-045-OO-P SG2-30-045-OO-W L Muting 815mm 3Beam SG2**-L3-080-PP-W
SG4-14-060-OO-P SG4-30-060-OO-P SG2-30-060-OO-W T Muting 915mm 2Beam SG2-T2-050-PP-W
SG4-14-075-OO-P SG4-30-075-OO-P SG2-30-075-OO-W T Muting 1215mm 3Beam SG2-T3-080-PP-W
SG4-14-090-OO-P SG4-30-090-OO-P SG2-30-090-OO-W T Muting 515mm 2Beam SG4-T2-050-PP-W
SG4-14-105-OO-P SG4-30-105-OO-P SG2-30-105-OO-W T Muting 815mm 3Beam SG4-T3-080-PP-W
SG4-14-120-OO-P SG4-30-120-OO-P SG2-30-120-OO-W ** For type 4 units replace 2 with 4 e.g SG4-S3-050-PP-E or SG4-L2-050-PP-W
For safety accessories see pages 322-323 ^Units with even longer controlled heights available on request.
CABLES FOR ALL SAFETY LIGHT CURTAINS
Cables - for SG2 MUTING & SG4 EXTENDED (Continued) Cables for SG BODY COMPACT BASE/MUTING - Main Connectors
Light Curtain Transmitter/Receiver Receiver Length Light Curtain Series Transmitter Cable Description LIMIT & PRESSURE SWITCHES & SENSORS
Series Secondary Connector Main Connector BASE CV-A1-22-B-03 M12 Axial 4 Pole 3m Cable
CV-A1-22-B-05 M12 Axial 4 Pole 5m Cable
SG2 MUTING CS-A1-03-U-03 CS-A1-10-U-03 3m (SG2/4-Sx-xxx-PP-E) CV-A2-22-B-03 M12 Radial 4 Pole 3m Cable
CV-A2-22-B-05 M12 Radial 4 Pole 5m Cable
(SG2-30-xxx-OO-W) CS-A1-03-U-05 CS-A1-10-U-05 5m MUTING
& CS-A1-03-U-10 CS-A1-10-U-10 10m
SG4 EXTENDED CS-A1-03-U-15 CS-A1-10-U-15 15m (SG2/4-S/L/Tx-xxx-PP-W)
(SG4-xx-xxx-OO-P) CS-A1-03-U-25 CS-A1-10-U-25 25m Light Curtain Series Receiver Cable Description
M12 Axial 8 Pole 3m Cable
CS-A1-03-U-50 CS-A1-10-U-50 50m BASE CV-A1-26-B-03 M12 Axial 8 Pole 5m Cable
CV-A1-26-B-05 M12 Radial 8 Pole 3m Cable
*Push buttons located on both TX and RX allow the user to configure the device (SG2/4-Sx-xxx-PP-E) CV-A2-26-B-03 M12 Radial 8 Pole 5m Cable
CV-A2-26-B-05
in a very easy and quik way
**A GUI interface on PC communicate to the barrier through Ethernet and lead the MUTING
customer through the configuration process step by step (SG2/4-S/L/Tx-xxx-PP-W)
***(1) The light curtain is sold without pigtail cables: they must be ordered - Secondary Connectors Receiver Cable Description
separately for Transmitter and Receiver. 2) In the case of the SG4 EXTENDED, CV-A1-03-U-03 M12 Axial 5 Pole 3m Cable
the choice of the Receiver pigtail determines if it will work in Muting configuration Light Curtain Series
or in Blanking configuration. 3) In case the SG4 EXTENDED will be installed MUTING
together with the programming and monitoring interface (DONGLE), the pigtail (Linear) (SG2/4-S/L/Tx-xxx-PP-W) CV-A1-03-U-05 M12 Axial 5 Pole 5m Cable
cable for Receiver isn’t needed. See accessories table for more info on DONGLE Note: The cables for the secondary connector of SG BODY COMPACT
Pigtail cable for receiver: Muting CS-R1-75-B-002, Blanking CS-G1-70-B-002 MUTING T and L are provided within the package
Pigtail cable for emitter: Muting & Blanking CS-G1-50-B-002
DAT 318
PRESENCE CONTROL AND REFLECTOR TYPE SAFETY LIGHT CURTAINS IP65
SERIES SG2-B-50/SG2-B-90 SG2-E-50/SG2-E-90 SG4 Body Big Reflector Base SG4 Body Big Reflector Muting
Type 4 Type 4
Type 2 Type 2
• According to IEC61496-1 Passive/Reflector Active Passive/Reflector Active
and EIC61496-2
Note: For Safety Light • Reflective muting arms
Curtain selection guide included in L and T
see Datalogic Short
Form Catalogue muting version
• Intergrated muting lamp
Sensing Distance 19m Selectable 9m or 19m Up to 8m Up to 8m
Power Supply 24VDC 24VDC 24VDC 24VDC
Resolution/No. of beams 50/90mm 50/90mm 2-3-4 2-3-4 (linear)
Controlled Height 300-1800mm 300-1800mm 500-800-900-1200mm 2-3 (L or T) 500-800-900-1200mm
500-800 (Lor T)
Response Time 20-80ms (50 vers), 20-80ms(50 vers), 12ms 12ms
8-19ms (90 vers) 8-19ms (90 vers)
Output 2 x PNP 2 x PNP 2 x PNP transistors 2 x PNP transistors
Connection Rx: M12 5-Pole Rx: M12 8-Pole Active units: M12 8-Pole Active units: M12 5-Pole+M12
Tx: M12 4-Pole Tx: M12 4-Pole Passive units: non connected 12-Pole,Passive units: non connected
Profile (mm) 32 x 37 32 x 37 52 x 57 52 x 57
Device Settings ** Dip Switches
Device Function Reset/Test/Auto Test, Manual/Auto Restart selection. Test, Manual/Auto Restart selection.EDM
Restart EDM selection selection
Plus Functions One-way or two-way Muting. Muting time-
out selection. Muting enable. Muting filter.
Edged/Triggered Override selection. Auto
restart after override selection.
Controlled Height/Beams
Acitve Passive/Reflector Acitve Passive/Reflector
300mm 9 Beam SG2-50*-030-OO-X SG2-50*-030-OO-E-C
450mm 13 Beam SG2-50*-045-OO-X SG2-50*-045-OO-E-C
600mm 17 Beam SG2-50*-060-OO-X SG2-50*-060-OO-E-C
750mm 21 Beam SG2-50*-075-OO-X SG2-50*-075-OO-E-C
900mm 25 Beam SG2-50*-090-OO-X SG2-50*-090-OO-E-C
1050mm 29 Beam SG2-50*-105-OO-X SG2-50*-105-OO-E-C
1200mm 33 Beam SG2-50*-120-OO-X SG2-50*-120-OO-E-C
500mm 2 Beam SG4-RB2-050-OO-E SG4-RDB2 SG4-RB2-050-OO-W SG4-RDB2
800mm 3 Beam SG4-RB3-080-OO-E SG4-RDB3 SG4-RB3-080-OO-W SG4-RDB3
900mm 4 Beam SG4-RB4-090-OO-E SG4-RDB4-090 SG4-RB4-090-OO-W SG4-RDB4-090
1200mm 4 Beam SG4-RB4-120-OO-E SG4-RDB4-120 SG4-RB4-120-OO-W SG4-RDB4-120
500mm L 2 Beam SG4-RB2L-050-OO-W SG4-RDB2L
500mm T 2 Beam SG4-RB2T-050-OO-W SG4-RDB2T
800mm L 3 Beam SG4-RB3L-080-OO-W SG4-RDB3L
800mm T 3 Beam SG4-RB3T-080-OO-W SG4-RDB3T
* For units with 90mm resolution replace 50 with 90 e.g. SG2-90-030-00-X ^Units with even longer controlled heights available on request.
LIMIT & PRESSURE SWITCHES & SENSORS Note: Active and Passive/Reflector units must be ordered separately to make up a set.
CABLES FOR ALL SAFETY LIGHT CURTAINS
Safety Muting Lamps Cables for SG BODY REFLECTOR BASE/MUTING - Main Connectors
Light Curtain Series Active Unit Code Description
SG BODY REFLECTOR BASE M12 8 Pole 3m Cable
CS-A1-06-U-03 M12 8 Pole 5m Cable
(SG4-RBx-xxx-OO-E) CS-A1-06-U-05 M12 8 Pole 10m Cable
CS-A1-06-U-10 M12 12 Pole 3m Cable
For Signal Towers please see AC/DC Main SG BODY REFLECTOR CS-A1-10-U-03 M12 12 Pole 5m Cable
Catalogue pages 346-347 MUTING (SG4-RBx-xxx-OO-W) CS-A1-10-U-05 M12 12 Pole 10m Cable
CS-A1-10-U-10
Axial Cable
Connector - Secondary Connectors
Light Curtain Series Active Unit Code Description
SG BODY REFLECTOR M12 5 Pole 3m Cable
MUTING (SG4-RBx-xxx-OO-W) CS-A1-03-U-03 M12 5 Pole 5m Cable
CS-A1-03-U-05 M12 5 Pole 10m Cable
CS-A1-03-U-10
319 DAT
SINGLE BEAM SAFETY PHOTOCELLS VDC PNP IP67
SERIES Safety Photocells SL5 Laser S300 Photo S300 Photo
Type 4 Type 2 Type 4
• Emitter-receiver photocells with test input S5 Photo
• Type 2 and Type 4 models Type 2 or Type 4
• Plastic tubular and MAXI
• Photocells with standard M12 connectors
• IR emission models for distances reaching
8m, 40m, 50m
• Class 1 laser emission models
for distances reaching 40m
Sensing Distance 0-8m 0-40m 0-50m 0-40m
Power Supply
Emmission 10-30VDC 10-30VDC 10-30VDC 10-30VDC
Output
Output Current LED Infrared 880nm Red Laser (650nm)* LED Infrared 880nm LED Infrared 880nm
Consumption
(Excluding output) PNP (short circuit protection) PNP NC open collector
Saturation Voltage
Response Time 100mA max 100mA resistive load
Switching Frequency
Housing Material 30mA max 35mA max F= < 25mA F= < 25mA
Mechanical Protection
Connections G= < 20mA G= < 20mA
Diagnostic functions
Weight 2V max 2V max 2.4V max 2.4V max
1ms 1ms 1ms 1ms
500hz 500hz 500hz 500hz
ABS UL 94V-O PBT 30% glass fibre-reinforced
IP67 IP67 IP67 IP67
M12 4-Pole Connector** M12 4-Pole Connector** Terminal Block Terminal Block
Test Input Test Input Test Input Test Input
30g Max 30g Max 140g Max 140g Max
OUTPUT:
Emitter Type 2 S5-5-G8-62-SG-ST2 S300-PR-5-G00-EX-SG-ST2 LIMIT & PRESSURE SWITCHES & SENSORS
S300-PR-5-F00-OC-SG-ST2
Receiver Type 2 S5-5-F8-92-SG-ST2
Emitter Type 4 S5-5-G8-62-SG-ST4 S300-PR-5-G00-EX-SG-ST4
S300-PR-5-F00-OC-SG-ST4
Receiver Type 4 S5-5-F8-92-SG-ST4
Laser Emitter Type 4 SL5-5-G-82-SG-ST4
Laser Reciever Type 4 SL5-5-F-92-SG-ST4
For sensor cable and accessories see pages 329-332
*CLASS 1 EN60825-1 (1994) Wiring Diagrams Emitter Terminal block
LASER PRODUCT Receiver
NOTE: THE SAFETY PHOTOCELLS
LISTED ABOVE ARE CERTIFIED AND Terminal block cover screw
MUST BE USED ONLY WITH SAFETY
CONTROL UNITS SG-BWS-T4 AND
SG-BWS-T4-MT SERIES. NEITHER
TECHNICAL AND FUNCTIONING
COMPATIBILITY NOR CERTIFICATIONS
ARE GUARANTEED IF USING THEM
WITH OTHER BRAND CONTROL UNITS
OR OLD/OBSOLETE DATALOGIC
AUTOMATION CONTROL UNITS
DAT 320
CONTROL UNITS, SAFETY RELAYS & CONNECTOR BOXES
• Integrated control of 4 single beams and 2 light curtains
• Simple DIP Swicth configuration
• Muting functions can be assigned to light curtains or
single beams
Code SG-BWS-T4 SG-BWS-T4-MT
Inputs
Power Supply 24VDC - 15/+10% 24VDC - 15/+10%
PNP Outputs from S5/SL5/S300 4 4
OSSDs Couples from SLC - 2
Muting Inputs -4
Test, Reset, Override, EDM, Muting 3 9
enable, Auto/Man Selector
Safety Outputs 2PNP 2NO
Muting Lamps -2
Outputs
Test Outputs 44
Response Time 29ms 39ms
Mechanical Data
Operating Temp. 0 to 55°C 0 to 55°C
Mechancial Protection IP20 IP20
Functions
Functions* Automatic/Manual Reset, External Device Monitoring Automatic/Manual Reset, External Device Monitoring
L/T Muting, Double Muting, Muting
Enable, Muting Timeout, Override
Compatibility Single Beam Photocells S5/SL5/S300 S5/SL5/S300
Compatibility Safety Light Curtains - All Datalogic Safety Light Curtains
Function settings are done through DIP switches in the SG-BWS-T4-MT and through wiring in the SG-BWS-T4
SE-SR2 is a safety unit that can be used in combination
with every DATALOGIC Safety Light Curtains. It provides
dual-channel operation without detection of shorts across
contacts. Short circuits and earth faults in the pushbutton
circuit are detected. CS-ME is an interface with two forcibly
guided relays, providing 3 NO contacts.
The diagnostic function must be performed by the Safety
Light Curtains through External Device Monitoring function.
Code SE-SR2 CS-ME
LIMIT & PRESSURE SWITCHES & SENSORS Power Supply 24VDC-15/+10% 24VDC-/+20%
Safe Outputs (Cat.4) 3NO 3NO
Auxiliary Outputs 1NC 1NC
Response Time Following Input going Off 15ms
Response Time With Power Failure typ. 10ms, max. 20ms 15ms
Recovery Time Following Inputs going On typ. 70ms, max. 120ms 40ms
Recovery Time After Power On 40ms
Operating Temperature 50ms
Mechanical Protection 150ms -25 to 55°C
-10 to 55°C IP20
Reset Modes IP20
External Device Monitoring Functions
Automatic/Manual/Monitred Automatic
Compatability Available on SE-SR2
Must be activated on
All Datalogic Safety Light Curtains Safety Light Curtain (ESPE)
All Datalogic Safety Light Curtains with EDM function
SG-SRT1 and SG-SRT2 are interfaces provided with SG-SRT1 SG-SRT2
redundant forcibly guided relays, supplying a ready
operator interface to restart or override the Safety Light
Curtain, and have muting indication.
SG-SRT1 and SG-SRT2 provide internal or external EDM
signal to the Safety Light Curtain: to operate safely, EDM
monitoring function must be activated on the Safety Light
Curtain and correct wiring must be followed.
Code
Power Supply 24VDC +/-20% 24VDC +/-20%
Safe Outputs
Max. Switchable Voltage 2NO 2NO
Max. Switchable Current
250VAC 250VAC
Reset Mode
2A 2A
Compatability
Functions
321
Automatic/Manual, Test, Reset, Restart, Override Automatic/Manual, Test, Reset, Restart, Override
- Muting State Indication
SG BODY COMPACT MUTING SG BODY BIG MUTING
SG BODY BIG MUTING SG BODY REFLECTOR MUTING
SG BODY REFLECTOR MUTING
DAT
ACCESSORIES FOR SAFETY LIGHT CURTAINS
Brackets - Metal angled brackets SG-IP69K - Protective Tubes
Code Description Code Description
ST-KSTD Fixing brackets (4pcs kit) SG-IP69K150 Tubular IP69K H=150mm
ST-K4OR Orientable supports (4pcs kit) SG-IP69K300 Tubular IP69K H=300mm
ST-K6OR Orientable supports (6pcs kit) SG-IP69K450 Tubular IP69K H=450mm
ST-K4AV Anti-vibration supports (4pcs kit) SG-IP69K600 Tubular IP69K H=600mm
ST-K6AV Anti-vibration supports (6pcs kit) SG-IP69K750 Tubular IP69K H=750mm
Compatible with SG2/4 BASE, SG2/4 EXTENDED, SG2/4 COMPACT BODY, SG-IP69K900 Tubular IP69K H=900mm
SG2 MUTING, SG2/4 BODY BIG, SG4 BODY REFLECTOR & SG4 LONG SG-IP69K1050 Tubular IP69K H=1050mm
RANGE BASE SG-IP69K1200* Tubular IP69K H=1200mm
Brackets - Cascade brackets Compatible with SG2/4 BASE & SG2 EXTENDED
Code Description SG-IP69K-2-050 Tubular IP69K H=500mm
ST-KCASCADE-SG EXTENDED Connection Bracket for SG4 SG-IP69K-3-080 Tubular IP69K H=800mm
EXTENDED Cascade SG-IP69K-4-090 Tubular IP69K H=900mm
Compatible with SG4 EXTENDED SG-IP69K-4-120 Tubular IP69K H=1200mm
Compatible with SG BODY COMPACT
Note: 1) Each package contains the necessary to protect a single unit (emitter
or receiver).To protect both elements of a couple, order two pieces
2) Tubular PMMA POLICRIL material chemical resistance table is available on
product’s datasheet. *Units with longer heights available on request.
Lens Shield
Brackets - Rear brackets Code Description
Code Description SG-LS 150 Lens shield 150 mm
SG-LS 300 Lens shield 300 mm
ST-K4REAR-SG BODY BIG Metal rear bracket mounting kit SG-LS 450 Lens shield 450 mm
(4 brackets) SG-LS 600 Lens shield 600 mm
SG-LS 750 Lens shield 750 mm
Compatible with SG BODY BIG, SG BODY REFLECTOR & SG4 LONG SG-LS 900 Lens shield 900 mm
RANGE BASE
SG-LS 1050 Lens shield 1050 mm
SG-LS 1200* Lens shield 1200 mm
SG-LS 2 Lens shield 2 beans 500 mm
SG-LS 3 Lens shield 3 beams 800 mm
SG-LS 4-900 Lens shield 4 beams 900 mm
SG-LS 4-1200 Lens shield 4 beams 1200 mm
SG-LS-MC4 Elastic fastener for lens shield
(kit 4pcs.)
Brackets - Rotating brackets SG-LSxxxx compatible with SG2/4 BASE & SG2 EXTENDED
Code
ST-K4ROT-SG BODY BIG Description SG-LS 2/3, SG-LS 4-900/120 compatible with SG BODY COMPACT
Metal top-bottom rotating fixing Laser Pointer
bracket mounting kit (4 brackets)
Code Description
ST-K4ROT-SG BODY COMPACT Metal top-bottom rotating bracket SG-LP SG-LP Laser pointer
ST-K4ROT
mounting kit (4 brackets) Compatible with all SG Series Safety Light Curtains
70
Metal top-bottom rotating brackets
LIMIT & PRESSURE SWITCHES & SENSORS
kit (4 brackets) Communication Interface for Programmable Safety Light Curtains
ST-K4ROT-SG-BODY BIG compatible with: SG BODY BIG, SG BODY Dongle
REFLECTOR & SG4 LONG RANGE BASE
ST-K4ROT-SG-BODY COMPACT compatible with: SG BODY COMPACT Code Description
ST-K4ROT compatible with: SG2/4 BASE & SG2 EXTENDED
SG4-DONGLE Ethernet adaptor
Compatible with SG4 EXTENDED
Functions
Ø39 +-150° • Ethernet connection (TCP/IP) to Monitoring
46 and Configuration Software SG4-E GUI.
30 • Configuration cloning
• Error logging
• Configuration logging
Note: To connect SG-DONGLE directly to a PC, order Ethernet cable
CAB-ETH-M01
Dongle - PC Ethernet Cable
ST-K4ROT-SG ST-K4ROT-SG ST-K4ROT Code Description
BODY BIG BODY COMPACT CAB-ETH-M01 M12-IP67 Ethernet` CAB 1M
DAT 322
ACCESSORIES FOR SAFETY LIGHT CURTAINS
Stands Mounting Kits - for SG-DM Mirrors, SG-PSB protective stands and safety
light curtains
Stands - Stands with adjustable mirrors (SG-PSM)
Code Description Code Description
SG-PSM-2-500 Protective stand with 2 mirrors H=500 mm ST-PS-DM Deviating mirror mounting kit (contains 2 T-nuts)
SG-PSM-3-800 Protective stand with 3 mirrors H=800 mm
Compatible with SG-DM Mirrors in SG-PSB protective stands.
SG-PSM-4-900 Protective stand with 4 mirrors H=900 mm Note: For each mirror
SG-PSM-4-1200 Protective stand with 4 mirrors H=1200 mm
(SG-DM xxx) order 1 kit.
Proptective Stands - (SG-PSB) and accessories
Code Description
SG-PSB 600 Protective Stand H=600 mm Mounting Kits for Safety Light Curtains
SG-PSB 1000 Protective Stand H=1000 mm
SG-PSB 1200* Protective Stand H=1200 mm Code Description
Compatible with all SG Series Light Curtains SG-DM-Mirrors ST-PS4-SG BODY Protective stand mounting kit for SG BODY BIG
Proptective Stands - (SE-S) and accessories (4 brackets)
Code Description ST-PS6-SG BODY Protective stand mounting kit for SG BODY BIG
SE-S 800 Column and floor stand H = 800 mm (6 brackets)
SE-S 1000 Column and floor stand H = 1000 mm ST-PS4-SG Protective stands mounting kit for SG (4 brackets)
SE-S 1200* Column and floor stand H = 1200 mm ST-PS6-SG Protective stands mounting kit for SG (6 brackets)
Compatible with all SG Series Light Curtains SG-DM-Mirrors ST-PSx-SG compatible with SG2/4 BASE, SG2/4 EXTENDED,
*Units with longer heights available on request SG2 MUTIING, SG BODY COMPACT
Stand Plate Kits ST-PSx-SG BODY compatible with SG BODY BIG, SG BODY REFLECTOR
Code Description Note: 1) Each kit allows to install an element (emitter or receiver, active part
SG-P Plate kit for protective stands or passive part) of a light curtain. To install both elements of the light curtain,
Compatible with protection stands SG-PSB mirror stands SG-PSM order 2 kits of the same type. 2) For light curtains with height ≥ 1200 mm,
Note: The kit includes two plates and three springs, order the 6 brackets kits (ST-PS6-SG xxxx).
to compensate the effect of collisions, vibrations and Accessories for Muting
uneven floor surfaces.
Muting Arms
Active/Passive Arms T-Arm
Code Description
Mirrors - Mirrors for finger and hand protection saftey light curtains (SG-DM) SG-L-ARMS Active/Passive arms Couple for L muting
Code Description SG-T-ARMS Active/Passive arms Couple for T muting L-Arm
SG-DM 600 Deviating mirror version 600 mm SG-AS-ARM Active sensor single arm
SG-DM 900 Deviating mirror version 900 mm SG-PR-ARM Passive reflector single arm
SG-DM 1200* Deviating mirror version 1200 mm Emitter/Receiver Arms
Note: 1) To mount these mirrors into the stands SG-PSB, SG-F1-G1-ARMS Emitter/Receiver arms couple (first couple)
order ST-PS-DM mounting kit. 2) To mount these mirrors SG-F2-G2-ARMS Emitter/Receiver arms couple (second couple)
to columns SE-S, order two ST-DM mounting kits Brackets and Cables
*Units with longer heights available on request Code Description
Single Beam Mirrors SG-CB-B Muting arms mounting bracket kit for BIG series
LIMIT & PRESSURE SWITCHES & SENSORS Code Description SG-CB-C Muting arms mounting bracket kit for COMPACT series
SG-DM 150 Deviating mirror version 150 mm CV-Y1-02-B-007 M12 4-Pole T muting cable
Note: 1) To mount this mirror into the stands SG-PSB order ST-PS-DM CV-L1-02-B-007 M12 4-Pole L muting cable
mounting kit. 2) To mount this mirrors to columns SE-S, order ST-DM
mounting kit Compatibility and Operating Distances
Muting Arm Code Light Curtain Code Operating
Distance
Mounting Kits for Mirrors
SG-L-ARMS SG BODY COMPACT MUTING 0.5-3m
Mounting Kits - for SG-DM mirrors on SE-S floor columns SG-T-ARMS
Code Description SG-AS-ARM SG2 BODY BIG MUTING 0.5-3m
ST-DM Kit stand alone SG-PR-ARM SG4 BODY BIG MUTING SHORT RANGE*
Compatible with SG-DM mirrors on SE-S floor columns SG BODY COMPACT MUTING
Note: For SG-DM 150 stand-alone mirror, order one kit. For longer mirrors
SG BODY REFLECTOR MUTING
(SG-DM 600 to SG-DM 1900), order two kits.
SG-F1-G1-ARMS SG2 BODY BIG MUTING 0.5-7m
For standalone mirror SG-F2-G2-ARMS SG4 BODY BIG MUTING SHORT RANGE*
(SG-DM 150) order one kit.
For longer mirrors (SG-DM 600 SG BODY COMPACT MUTING
to SG-DM 1900), order two kits.
The kit can be used to mount * SG4 BODY MUTING LONG RANGE (whose operating range is 6-60m) can
mirrors on SE-S column.
ST-DM not be used in combination with muting arms.
mounting
kit Note: SG-T-ARMS (T muting cable CV-Y1-02-B-007 is included)
SG-L-ARMS (L muting cable CV-L1-02-B-007 is included)
323 DAT
DC INDUCTIVE SPEED SENSORS M30 OR 5 WAY ROTATABLE HEAD IP67
Diameter M30 M30 40X40mm 40X40mm
Shielded Non-Shielded
• Nominal Voltage: 10-30VDC
• Max. Load Current: 200mA
Sensing Distance 10mm 15mm 20mm 30mm
Speed Range (1 pulse 1 turn) 6-150 targets/minute (slow). 120-3000 targets/minute (fast) 6-150 targets/minute (slow). 120-3000 targets/minute (fast)
Power Up Delay 0.5-10sec 0.5-10sec
Operation LED Present Present
Short Circuit Protection YES YES
Hysteresis <15% < 15%
Temperature -25° to 70°C -25° to 70°C
Housing Material Nickel Plated Brass PBT
Wiring Diagrams
Typical applications include under Culinder M30 5 Way Rotational Head
speed, locked rotor and zero
speed detection for shaft, belt or PNP
web. Breakage, sequentional
motor starting or runout detection.
NPN
OUTPUT: FCM1-3010P-A3U2/S* FCM2-3015P-A3U2/S* FQP1-Q4020P-A3U/S* FQP2-Q4030P-A3U/S*
PNP N.O. FQP2-Q4030P-B3U/S*
PNP N.C. FCM1-3010P-B3U2/S* FCM2-3015P-B3U2/S* FQP1-Q4020P-B3U/S* FQP2-Q4030N-A3U/S*
NPN N.O. FQP2-Q4030N-B3U/S*
NPN N.C. FCM1-3010N-A3U2/S* FCM2-3015N-A3U2/S* FQP1-Q4020N-A3U/S*
FCM1-3010N-B3U2/S* FCM2-3015N-B3U2/S* FQP1-Q4020N-B3U/S*
*For fast speed 120-3000 targets/minute change S to F e.g FCM1-3010N-A3U2/F
DC INDUCTIVE MICRO PROXIMITY SWITCHES IP67
Diameter MPS-8 MPS-10 MPS-12 MPS-15
Non-Shielded
• Max. Load Current: 100mA
Sensing Distance 2.5mm 3mm 3mm. 6mm(P/N) 8mm
Supply Voltage
Switching Frequency 10-30VDC (3 wire) 10-60VDC (2 wire) 10-30VDC (3 wire) 10-60VDC (2 wire) 10-30VDC (3 wire) 10-60VDC (2 wire)
Operation LED
Short Circuit Protection 1 KHZ (2 wire) 500 HZ (3 wire) 1 KHZ(2wire) 250HZ(3wire) 500HZ(6mm P/N) 1 KHZ (2 wire) 250HZ (3 wire)
Temperature
Housing Material Present Present Present LIMIT & PRESSURE SWITCHES & SENSORS
Cable Length
Dimensions (mm) YES YES YES
Wiring Diagrams
-25° to 70°C -25° to 70°C -25° to 70°C
Polycarbonate Polycarbonate Polycarbonate
2m 2m 2m
8 x 7,4 x 20 8 x 8 x 23 10 x 6 x 27 12 x 7,1 x 27 15 x 8 x 32 15 x 15 x 30
DC 2-Wire NPN Output PNP Output
OUTPUT: LQP2-82.5P-AF LQP2-82.5P-AT LQP2-103P-AF LQP2-123P-AF LQP2-156.4P-AF LQP2-156.4P-AT
LQP2-82.5P-BF LQP2-82.5P-BT LQP2-103P-BF LQP2-123P-BF LQP2-156.4P-BF LQP2-156.4P-BT
PNP NO (3 Wire) LQP2-82.5N-AF LQP2-82.5N-AT LQP2-103N-AF LQP2-123N-AF LQP2-156.4N-AF LQP2-156.4N-AT
PNP NC (3 Wire) LQP2-82.5N-BF LQP2-82.5N-BT LQP2-103N-BF LQP2-123N-BF LQP2-156.4N-BF LQP2-156.4N-BT
NPN NO (3 Wire) LQP2-82.5C-AF LQP2-82.5C-AT LQP2-103C-AF LQP2-123C-AF LQP2-156.4C-AF LQP2-156.4C-AT
NPN NC (3 Wire) LQP2-82.5C-BF LQP2-82.5C-BT LQP2-103C-BF LQP2-123C-BF LQP2-156.4C-BF LQP2-156.4C-BT
NO (2 Wire)
NC (2 Wire) DAT 324
DC INDUCTIVE SENSORS
Diameter ØM12 ØM18 ØM30 ØM40
Flush Surface
Sensing Distance IP67 4mm IP67 8mm IP68 15mm IP68 25mm
2mm 5mm 10mm 20mm
Supply Voltage 10 - 30VDC 10 - 30VDC 10 - 30VDC 10 - 30VDC
Current Consumption < 8 mA < 8 mA ≤ 10 mA ≤ 10 mA
400 mA 400 mA
Output Current 200 mA 200 mA
Voltage Drop < 1,5 V @ 200 mA < 1,5 V @ 200 mA ≤ 2V ≤ 2V
Switching Frequency 1000 Hz 500 Hz 300 Hz 500 Hz 100 Hz 500 Hz 1000 Hz 500 Hz
Operating Temp.
Hysteresis -25 to +70 ℃ -25 to +70 ℃ -20 to +70 ℃ -20 to +70 ℃
3 ...15% 3 ...15% 3 ...15% 3 ...15%
Cable length 2 meters, PVC 2 meters, PVC 2 meters, PVC 2 meters, PVC
Cable section 3 Wire 3 Wire 3 Wire, 4 Wire(NX) 3 Wire, 4 Wire(NX)
Housing Material Nickel Plated Brass Nickel Plated Brass Aluminium Aluminium
Wiring Diagram
For Sensor Cables see pages 329-332
Flush Surface Flush Surface Flush Surface Flush Surface
PNP NO, Cable IS4-1202F-NOMTC IS4-1204S-NOMTC IS4-1805F-NOMTC IS4-1808S-NOMTC RI4-3010F-NOMTC RI4-3015S-NOMTC RI4-4020F-NOMTC RI4-4025S-NOMTC
PNP NC, Cable
PNP NO/NC, Cable IS4-1202F-NCMTC IS4-1204S-NCMTC IS4-1805F-NCMTC IS4-1808S-NCMTC RI4-3010F-NCMTC RI4-3015S-NCMTC RI4-4020F-NCMTC RI4-4025S-NCMTC
PNP NO, Plug
PNP NC, Plug - - - - RI4-3010F-NXMTC RI4-3015S-NXMTC RI4-4020F-NXMTC RI4-4025S-NXMTC
PNP NO/NC, Plug
NPN NO, Cable IS4-1202F-NOMTP IS4-1204S-NOMTP IS4-1805F-NOMTP IS4-1808S-NOMTP RI4-3010F-NOMTP RI4-3015S-NOMTP - -
NPN NC, Cable
NPN NO/NC, Cable IS4-1202F-NCMTP IS4-1204S-NCMTP IS4-1805F-NCMTP IS4-1808S-NCMTP RI4-3010F-NCMTP RI4-3015S-NCMTP - -
NPN NO, Plug
NPN NC, Plug - - - - RI4-3010F-NXMTP RI4-3015S-NXMTP - -
NPN NO/NC, Plug
IS5-1202F-NOMTC IS5-1204S-NOMTC IS5-1805F-NOMTC IS5-1808S-NOMTC RI5-3010F-NOMTC RI5-3015S-NOMTC RI5-4020F-NOMTC RI5-4025S-NOMTC
LIMIT & PRESSURE SWITCHES & SENSORS IS5-1202F-NCMTC IS5-1204S-NCMTC IS5-1805F-NCMTC IS5-1808S-NCMTC RI5-3010F-NCMTC RI5-3015S-NCMTC RI5-4020F-NCMTC RI5-4025S-NCMTC
- - - - RI5-3010F-NXMTC RI5-3015S-NXMTC RI5-4020F-NXMTC RI5-4025S-NXMTC
IS5-1202F-NOMTP IS5-1204S-NOMTP IS5-1805F-NOMTP IS5-1808S-NOMTP RI5-3010F-NOMTP RI5-3015S-NOMTP - -
IS5-1202F-NCMTP IS5-1204S-NCMTP IS5-1805F-NCMTP IS5-1808S-NCMTP RI5-3010F-NCMTP RI5-3015S-NCMTP - -
- - - - RI5-3010F-NXMTP RI5-3015S-NXMTP - -
Intelligent Canline Sensor IP67
The Intelligent Can Line Sensor has been specifically designed and developed for detecting the presence and movement
of cans and automated can making and can filling lines. When interfaced with Programmable Logic Controller (PLC) the
sensor’s integrated intelligence released the PLC from time-consuming computing activities.
Code Description The Can Line Sensor is versatile enough to be used in a variety of CAN MATERIAL Sn
RI4-9020F-NOPBC PNP, N.O., c/w Fly Lead applications.
RI4-9020F-NOPBP PNP, N.O., c/w M.Plug Some of these are: Mild Steel 20
RI5-9020F-NOPBC NPN, N.O., c/w Fly Lead • Gap-detection (missing cans) Stainless Steel 15
RI5-9020F-NOPBP NPN, N.O., c/w M.Plug • Pile-up detection Aluminium 8
• Proximity and motion detection
325 • Built-back control
• Detection of missing tops or crowns on bottling lines
RHS
NAMUR INDUCTIVE & CAPACITIVE SENSORS IP68 (DIN 19234)
Diameter ØM12 ØM18 ØM30 ØM40
Flush Surface
For Sensor Cables see
pages 329-332
Sensing Distance 2mm 4mm 5mm 8mm 10mm 15mm 20mm 25mm
Supply Voltage 8,2 - 10VDC (via module) 8,2 - 10VDC (via module) 8,2 - 10VDC (via module) 8,2 - 10VDC (via module)
Current Consumption
Output Current (Metal Present) ≤ 2 mA ≤ 2 mA ≤ 2 mA ≤ 2 mA
0,8mA Typical 0,8mA Typical 0,8mA Typical 0,8mA Typical
Output Current (Metal Absent) 4mA Typical 4mA Typical 4mA Typical 4mA Typical
Switching Frequency 2000Hz 1000Hz 500Hz 500Hz
Operating Temp.
Hysteresis -20 to +70 ℃ -20 to +70 ℃ -20 to +70 ℃ -20 to +70 ℃
3 to 15% 3 to 15% 3 to 15% 3 to 15%
Cable Length 2m 2m 2m 2m
Cable Section 2 Wire 2 Wire 2 Wire 2 Wire
Housing Material Aluminium Aluminium Aluminium Aluminium
Wiring Diagram NAMUR control module NAMUR sensors
OUTPUT: require a suitable
Ex ia, Gr T6 NAMUR sensors require Slimline Control Module
a suitably approved control module to operate SC300 or
to operate in intrinsically safe areas. SC301
(Please request more information)
NAMUR NC, Cable Flush Surface Flush Surface Flush Surface Flush Surface
NAMUR NC, Plug RI0-1202F-NCMTC RI0-1204S-NCMTC RI0-1805F-NCMTC RI0-1808S-NCMTC RI0-3010F-NCMTC RI0-3015S-NCMTC RI0-4020F-NCMTC RI0-4025S-NCMTC
- - RI0-1805F-NCMTP RI0-1808S-NCMTP - - - -
Capacitive NAMUR Sensors
NC, Metal, Cable - - - - RC0-3010F-NCMTC RC0-3020S-NCMTC - -
NC, Metal, Plug - - - - RC0-3010F-NCMTP RC0-3020S-NCMTP - -
AC INDUCTIVE SENSORS IP68
Diameter ØM12 ØM18 ØM30 ØM40
Flush Surface
For Sensor Cables see 2mm 4mm 5mm 8mm 10mm 15mm 20mm 25mm LIMIT & PRESSURE SWITCHES & SENSORS
pages 329-332 20 - 250VAC 20 - 250VAC
Sensing Distance ≤ 2 mA ≤ 2 mA 20 - 250VAC 20 - 250VAC
Supply Voltage 400mA 400mA
Current Consumption 10Hz 10Hz ≤ 2 mA ≤ 2 mA
Output Current -20 to +70 ℃ -20 to +70 ℃ 400mA 400mA
Switching Frequency 3 to 15% 3 to 15%
Operating Temp. 2m 2m 10Hz 10Hz
Hysteresis 2 Wire 2 Wire
Cable Length Aluminium Aluminium -20 to +70 ℃ -20 to +70 ℃
Cable Section 3 to 15% 3 to 15%
Housing Material Cable Type Plug Type
Wiring Diagram 2m 2m
OUTPUT: 2 Wire 2 Wire
NO, Cable Aluminium Aluminium
NC, Cable
NO, Plug Note: These sensors are not protected
NC, Plug
against sustained current fault conditions.
The fitting of an external inline 0, 4A fuse is
therefore advised.
Flush Surface Flush Surface Flush Surface Flush Surface
RI1-1202F-NOMTC RI1-1204S-NOMTC RI1-1805F-NOMTC RI1-1808S-NOMTC RI1-3010F-NOMTC RI1-3015S-NOMTC RI1-4020F-NOMTC RI1-4025S-NOMTC
RI1-1202F-NCMTC RI1-1204S-NCMTC RI1-1805F-NCMTC RI1-1808S-NCMTC RI1-3010F-NCMTC RI1-3015S-NCMTC RI1-4020F-NCMTC RI1-4025S-NCMTC
RI1-1202F-NOMTP RI1-1204S-NOMTP RI1-1805F-NOMTP RI1-1808S-NOMTP RI1-3010F-NOMTP RI1-3015S-NOMTP - -
RI1-1202F-NCMTP RI1-1204S-NCMTP RI1-1805F-NCMTP RI1-1808S-NCMTP RI1-3010F-NCMTP RI1-3015S-NCMTP - -
RHS 326
CAPACITIVE SENSORS IP67
Diameter ØM12 ØM18 ØM30 1,5 “BSP
Flush Surface
For Sensor Cables see
pages 329-332
Sensing Distance 4mm 8mm 8mm 15mm 20mm 30mm 20mm
10 - 30VDC
Supply Voltage 10 - 30VDC <9 mA 10 - 30VDC 20-250VAC 50160Hz 10-60VDC
200 mA
Current Consumption <9 mA <9 mA 2.5 mA 10mA
2 V @ 200 mA
Output Current 200 mA Multi-turn Pot 200 mA 400mA (min 10mA) 400mA
Voltage Drop 2 V @ 200 mA 100 Hz 2 V @ 200 mA 2 V @ 200 mA 2V @ 200mA
-25 to +70 ℃
Adjustment Multi-turn Pot Multi-turn Pot Multi-turn Pot Multi-turn Pot
<4%
Switching Frequency 100 Hz 2 meters, PVC 100 Hz 10 Hz 80 Hz
2 wire or 3 wire
Operating Temp. -25 to +70 ℃ Nickel Plated Brass -25 to +70 ℃ -10 to +65 ℃ -10 to +65℃
Hysteresis <4% <4%
AC 2 Wire <5% <5%
Cable Length 2 meters, PVC 2 meters, PVC Terminal Terminal
Cable Section 3 wire 2 wire or 3 wire Connection Connection
Housing Material Nickel Plated Brass Nickel Plated Brass PVC PVC
Wiring Diagram 3 Wire Sensors NAMUR
OUTPUT: Code: RC0-4020S-NCPBT (NC)
DC Sensors
PNP NO, Plug Flush Surface Flush Surface Flush Surface AC 2 Wire
CS4-1204F-NOMTP CS4-1208S-NOMTP CS4-1808F-NOMTP CS4-1815S-NOMTP CS4-3020F-NOMTP CS4-3030S-NOMTP 0.4A fuse protection required
PNP NC, Plug CS4-1204F-NCMTP CS4-1208S-NCMTP CS4-1808F-NCMTP CS4-1815S-NCMTP CS4-3020F-NCMTP CS4-3030S-NCMTP
NPN NO, Plug CS5-1204F-NOMTP CS5-1208S-NOMTP CS5-1808F-NOMTP CS5-1815S-NOMTP CS5-3020F-NOMTP CS5-3030S-NOMTP
NPN NC, Plug CS5-1204F-NCMTP CS5-1208S-NCMTP CS5-1808F-NCMTP CS5-1815S-NCMTP CS5-3020F-NCMTP CS5-3030S-NCMTP Code: RC1-4020S-NOPBT (NO)
AC Sensors -NCPBT (NC)
2 Wire NO Cable 20-250VAC - - CS1-1808F-NOMTC CS1-1815S-NOMTC CS1-3020F-NOMTC CS1-3030S-NOMTC DC PNP 3 Wire
2 Wire NC Cable 20-250VAC - - CS1-1808F-NCMTC CS1-1815S-NCMTC CS1-3020F-NCMTC CS1-3030S-NCMTC
OPTO ELECTRONIC SENSORS Code: RC4-4020S-NOPBT (NO)
Type Opto - Proximity Opto - Barrier Sets Opto - Fork Sensor -NCPBT (NC)
IP66 IP66 IP67
IP67 DC PNP 3 Wire
Code: RC5-4020S-NOPBT (NO)
-NCPBT (NC)
Sensing Distance 2m 10m 5m 3.5mm NAMUR
Supply Voltage 10 - 30VDC Requires a suitable control
Setting Select control voltage when ordering SC410/SC411 control relay Sensitivity Trimmer module to operate
Output Current 2 Wire AC
Current Comsumption Sensitivity Trimmer Sensitivity Trimmer 400mA Supply Voltage: 20 to 250VAC,
Voltage Drop < 10mA 50/60Hz
LIMIT & PRESSURE SWITCHES & SENSORS Operation Mode --- 2V max Minimum Load Current: 10mA
Operating Temperature Dark or Light Continuous Load Current: 400mA
--- 0 - 70℃ Off-state Quiescent Current:
≤2,5mA at 250VAC
--- These sensors are not protected
against sustained over current
Dark or Light Dark or Light Dark or Light fault conditions. The fitting of
an external inline 0,4A fuse is
0 - 70℃ 0 - 70℃ 0 - 70℃ therefore advised.
DC Sensors are to be connected
SC410/SC411 See pg 24 **See pg 24 for Control Unit **See pg 24 for Control Unit to a DC power supply and
can switch loads (e.g. Relays,
Front Sensing RO2-5005P-NOMBC RO2-5010B-NOMBC (pair) RO2-1210B-NOMTC (pair) solenoids, PLC’s) directly.
Supply Voltage: 10 to 60VDC
Side Sensing RO2-2005P-NOMBC RO2-2010B-NOMBC (pair) Maximum Ripple: 10%
Maximum Load Current: 400mA
Fork Sensing PNP RO4-2003B-NOMBC Quiescent Current: <10mA
RO4-2503B-NOMBC Polarity Protection: Yes
Fork Sensor PNP with Overload Protection: Yes
Short Circuit Protection: Yes
remote sensitivity adjustment
Separate Parts (i.e. not Tx+Rx) RO2-1210T-NOMTC
Front Transmitter RO2-5010T-NOMBC RO2-1210R-NOMTC
Front Receiver RO2-5010R-NOMBC
Side Transmitter RO2-2010T-NOMBC
Side Receiver RO2-2010R-NOMBC
327 RHS
INCREMENTAL AND ABSOLUTE OPTICAL ROTARY ENCODERS
Basic Line Extended Line SSI Single-turn SSI Multi-turn Multi-turn with Modular
Absolute 58mmØ Fieldbus Interface
Incremental 41mmØ Incremental 58mmØ Absolute 58mmØ Absolute 58mmØ
Power Supply 5–30VDC 5–30VDC 7.5–34VDC 7.5–34VDC 10–30VDC
Resolution Up to 4096 PPR 2048 up to 10000 PPR 13 bit = up to 8192 count CPR x 4096 turns CPR x 16384 turns
and programmable per revolution (CPR)
Output Signals/ Code AB0 and /A/B/0 AB0 and /A/B/0 Gray Gray -
Output Circuit Smart Push-Pull & Line Smart Push-Pull & Line SSI® (RS422) SSI® (RS422) Fieldbus interface module
Driver Driver
Consumption 50mA max. 70mA max. 0.9W 1W 2.2W
Output Current 40 mA max (per channel) 40 mA max (per channel) - - -
Connection Cable 1.5m Cable 1.5m or connector Cable 1.5m or connector Cable 1.5m or connector M12 connectors
M12 or M23 M12 or M23 M12 or M23
Shaft Dimension Hollow or Solid Shaft Hollow Ø14 or 15mm, Hollow Ø15mm, solid Ø6 Hollow Ø15mm, solid Ø6 Hollow Ø15mm, solid Ø6
Ø6mm solid Ø6 or 10mm or 10mm or 10mm or 10mm
Case Dimension Ø40.5mm, depth 34mm Ø58mm, depth 54mm Ø58mm, depth 48mm Ø58mm, depth 48mm Ø58mm, depth 71mm
(encoder + interface module)
Part Numbers
Hollow Shaft Ø6/14/15mm ENC41-H06-**-C15 ENC58-H14*-**-C15*** AST58-H15-13X01-C15*** AMT58-H15-13X12-C15*** AMT58-H15-16X4-FBUS
Solid Shaft Ø6/10mm ENC41-S06-**-C15 ENC58-S06^-**-C15*** AST58-S06^-13X01-C15*** AMT58-S06^-13X12-C15***AMT58-S06^-16X4-FBUS
*For Ø15mm shaft use 15 e.g. ENC58-H15. ^ For Ø10mm shaft use 10 e.g. ENC58-S10 or AST58-S10 or AMT58-S10
**For PPR add 0100, 0360, 0500, 1000,1024, 2048, 4096.
**For PPR add 0500, 1000, 1024, 2000, 2048, 5000, 10000, Prog. (only available M23 Conn.)
***For M12 plug use M12, for M23 plug use M23, e.g. ENC58---M12/M23 or AST58--13X01-M12/M23 or AMT58--13X12-M12/M23
FIELDBUS INTERFACE MODULES
Electrical Connections: ENC41-S/H SSI Serial Connections: AMT/AST58-H/S CANopen interface module* AMT58-FBUS-CB
A /A B /B 0 /0
Signals +VDC 0VDC Shield Signals M23 12-pin M12 8-pin Cable Devicenet interface module* AMT58-FBUS-DN
Green Yellow Grey Pink Blue Red Brown White Shield
AB0,/AB0 0V 1 1 White Profibus DP interface module* AMT58-FBUS-PB
outputs
(8-wire cable) +VDC 2 2 Brown *The encoder base unit must be ordered with the
FIELDBUS interface module. The encoder base
Clock In+ 3 3 Green unit must be connected to the required FIELDBUS
interface module
Electrical Connections: ENC58-S/H Clock In- 4 4 Yellow
/A B /B 0 /0
Signals A 45678 +VDC 0VDC Shield Data Out+ 5 5 Grey
M12 8-pin 3 45678 2 1 Case
M23 12-pin 3 2 1 Case Data Out- 6 6 Pink CANopen or Devicenet Profibus-DP
Preset 7 7 Blue
AB0,/AB0 Brown White Shield Count dir. 8 8 Red
outputs Green Yellow Grey Pink Blue Red Shield Case Case Shield
(8-wire cable)
ACCESSORIES FOR ENCODERS
Aluminium and Plastic Couplings Ø6mm & Ø10mm 14
12
Code FAC06-06 FBC06-06 FAC10-10 FBC10-10
LIMIT & PRESSURE SWITCHES & SENSORS
Diameter Ø6mm Ø6mm Ø10mm Ø10mm FAC06-06 FBC06-06
FAC10-10 FBC10-10
Encoder Reducing Sleeve Code Description
Code RS15-06* OEK-4 Encoder Kit PNP 250PPR.
Bracket, Spring and Wheel
*For 8mm, 10mm, 11mm, 12mm use 08, 10, 11, 12 RS15-06* Programming tool for ENC58
M12 Cable for Programming Tool
Encoder Mounting Brackets for Ø58 Encoders IEP58-PROG-TOOL M12 Cable for Programming Tool
Code ST-58-KIT ST-58-BELL ST-58-BRKT ST-58-FLNG CN-M12-PROG-CABLE
CN-M23-PROG-CABLE
Cables and Connectors ST-58-BRT
Code CS-A1-06-U-03* 42.5
*For 5m, 10m, 15m, 25m, 50m cable use 05,10, 15,
25, 50 CN-M12
CS-A1-06-U-03*
Linear Measurement Draw Wire OEK-4
Code DWA*-5000 CN-M23
*For integral encoder use I DWA*-5000 IEP58-PROG-TOOL
DAT 328
ROTARY ENCODERS
Coupling 20mmØ, Shaft Type Encoder 40mmØ, Shaft Type Encoder 50mmØ, Shaft Type Encoder
(Incremental Type) (Incremental Type) (Incremental Type)
Code E4DC-6/6 Code Supply Volts Code Supply Volts Code Supply Volts
Code E5DC-8/8
Code E5DC-10/10 E20S2-*-3-V-R 12-24VDC E40S6-*-3-1 12-24VDC E50S8-*-3-1 12-24VDC
Type E20S2-*-3-N-R 12-24VDC E40S6-*-3-2 12-24VDC E50S8-*-3-2 12-24VDC
Totem Pole Output (HTL) E20S2-*-3-L-R 5VDC E40S6-*-6-L 5VDC E50S8-*-6-L 5VDC
NPN N/O Output (TTL)
Line Driver Output (TTL) *Add to code: *100, 200, 320, 360 *Add to code: *100, 360, 500, 1000,1024 *Add to code: *50, 100, 200, 250,
Pulses/Revolution 360, 1000, 1024, 1800, 2500, 3600
Specifications 2mm 6mm 8mm
Shaft
Totem Pole Output Low Load current: Max. 30mA, Residual voltage: Max. 0.4V
NPN Open Output High Load current: Max. 10mA, Output Voltage: Min. 1.5V
Line Driver Output Load Voltage: Max. 30V, Load current: Max. 30mA, Residual Voltage: Max. 0.4V
Max. Response Freq.
Low Load current: Max. 20mA, Residual Voltage: Max. 0.5V
High Load current: Max. -20mA, Output Voltage: Min. 2.5V
100kHz 180kHz
DISTRIBUTION BOXES & CABLES
Distribution Boxes & Cables M23 Female Connectors for Plug Type Distribution Boxes
Code: Cable Version Description Code Description
DSTR8-5/4AZ-1205
DSTR8-5/4PA-1205 5-Pole 4 wire 250VAC (54x127mm) Z-FS12KAT5005 M23 12-Pole Plug and 5m Cable for Plug Type
DSTR8-5/4NA-1205 Distribution Boxes
5-Pole 4 wire 10-30VDC PNP LED's (54x127mm)
Code: Plug Version
DLTR8-5/4NA-T12 5-Pole 4 wire 10-30VDC NPN LED's (54x127mm)
DLTR8-5/4PA-T12 M12 Male to Female Cable Connectors
DM8C8-4/4PC-12705
Description Code Description
5-Pole 4 wire NPN 10-30VDC LED's R-MS5TZU822+R-FS5TZU822 M12 5-Pole Male to Female Connector
5-Pole 4 wire PNP 10-30VDC LED's Straight
M8 4-pole PNP 10-30VDC R-MS5TZU822+R-FA5TZU822 M12 5-pole Male to Female Connector
Right Angle
Micro Splitter with Cable
Code Description
LIMIT & PRESSURE SWITCHES & SENSORS U2-R4R-FS4KPV062 M12 Splitter with 2 M12 plugs. Male to Female
Straight(PNP)
U2-R4R-FS4KZV062 M12 Splitter with 2 M12 plugs. Male to Female
Straight
U2-R4R-FA4KPV062 M12 Splitter with 2 M12 plugs. Male to Female Right
Angle (PNP)
U2-R4R-FA4KZV062 M12 Splitter with 2 M12 plugs. Male to Female Right
Angle
Micro Splitter Description
Code M12 5-Pole Male - M12 4-Pole Female
U2-R5/4Z-R4 M12 5-Pole Male - M12 5-Pole Female
U2-R5/5Z-R5
329 SCA
CABLE & ACCESSORIES FOR PROXIMITY SWITCHES & SENSORS
Connectors and Cables Accessories for 90° Sensing
Dimensions Cable Length* Code Code DEV90 90° Adaptor
Female connector and cable M12 Plug For use with M18 photo electric sensors
90° Version 4 Pin 4 Wire 3m CS-A2-02-G-03 Mirror 90°
5m CS-A2-02-G-05
38.5
10 14 24 3 Pin 3 Wire 5m CS-A2-11-G-05 Object to be
12 sensed
Connector with no cable CS-A2-02-B-NC
Example of application
Straight Version 4 Pin 4 Wire 3m CS-A1-02-G-03
5m CS-A1-02-G-05
42.5
3 Pin 3 Wire 5m CS-A1-01-G-05
Connector with no cable CS-A1-02-B-NC Nuts
M30*-NUTS/2
Female connector and cable M8 Plug 4 Pin 4 Wire 3m CS-B1-02-G-03
5m CS-B1-02-G-05 M18*-NUTS/2
32 M12-NUTS/2
M8-NUTS/2
3 Pin 3 Wire 3m CS-B1-01-G-03 M5-NUTS/2
5m CS-B1-01-G-05
*For Plastic Type, add P to code
*10m versions available on request
Reflectors Shutter for Emitter-Receiver Thru Beam
Code Accessory to sense small size object with emitter-receiver cylindrical barriers M18.
R2 R5 Code P180TT Shutter kit
Ø63 Note: Each package contains three shutter disks.
55
Shutting Min. Object to Distance
74 Ø83 Diam. be Sensed Attenuation
48
61 4.3 23 2mm > 2mm 97%
4mm > 4mm 84%
8mm > 8mm 54%
Code R4 DAC100 13.5 Note: The datum “Minimum object to be sensed” refers
to the condition of shutter mounted on emitter/receiver.
10 20 10
Example of Application
92
100
51.5
Mounting Brackets for Proximity Switches and Photo Sensors
(Stainless Steel)
Code ST1218 ST1830 JOINT-18 ST-5039 ST-504 LIMIT & PRESSURE SWITCHES & SENSORS
Description For M12 & M18 For M18 & M30 S62 Mounting Bracket
Adjustable M18 Mounting S100 and S3Z Mounting
Bracket Bracket
Code JOINT-62 ST-505 ST-5072 ST-5100 ST-S3Z-M18
Description Adjustable S62 Mounting S40 and S41 S8 Mounting S300-PR Mounting M18 Threaded Adapter
Mounting Bracket Nose for S100 & S3Z
Bracket Bracket Bracket
330
DAT
SENSOR CABLES & CONNECTORS
M8 Series M12 Series Poles Angle Cable Type M8 Female Code M12 Female Code
M8FS-3V*-3**
Straight Right Angled Straight Right Angled 3-Pole Straight Non-Shielded M8FS-4V*-3** M12FS-3V*-3**
4-Pole Straight Non-Shielded M12FS-4V*-3**
M8 PIN Assignment Wire Colour 5-Pole Straight Non-Shielded M8FS-3V*-3**SH M12FS-5V*-3**
3-Pole 4-Pole 5-Pole 3-Pole Straight Shielded M8FS-4V*-3**SH M12FS-3V*-3**SH
PIN 4-Pole Straight Shielded M12FS-4V*-3**SH
5-Pole Straight Shielded M8FR-3V*-3** M12FS-5V*-3**SH
1 Brown Brown Brown 3-Pole Right Angled Non-Shielded M8FR-4V*-3** M12FR-3V*-3**
4-Pole Right Angled Non-Shielded M12FR-4V*-3**
M12 PIN Assignment 2 White White 5-Pole Right Angled Non-Shielded M12FR-5V*-3**
3 Blue Blue Blue 3-Pole Right Angled Shielded M12FR-3V*-3**SH
4-Pole Right Angled Shielded M12FR-4V*-3**SH
4 Black Black Black 5-Pole Right Angled Shielded M12FR-5V*-3**SH
5 Grey
Poles M8 Male Straight to M12 Female Straight Poles M12 Male Straight to M12 Female Straight
3-Pole M8-3MS-3**-M12-3FS-V* 3-Pole M12-3MS-3**-M12-3FS-V*
4-Pole M8-4MS-3**-M12-4FS-V* 4-Pole M12-4MS-3**-M12-4FS-V*
5-Pole - 5-Pole M12-5MS-3**-M12-5FS-V*
Poles M12 Male Straight to M12 Female Right Angled Poles M12 Female Straight to M12 Male Right Angled
3-Pole M12-3MS-3**M12-3FR-V* 3-Pole M12-3FS-3**M12-3MR-V*
4-Pole M12-4MS-3**M12-4FR-V*
5-Pole M12-5MS-3**M12-5FR-V* 4-Pole M12-4FS-3**M12-4MR-V*
5-Pole M12-5FS-3**M12-5MR-V*
M8 PNP Sensor Actuator Boxes Single or Double Occupancy. Cable or
M23 Plug Versions with LED’s IP67
Poles Cable Length Ports Code
3/4-Pole 5m 4 M8PSL-3†4P-5U^^
3/4-Pole 10m 4 M8PSL-3†4P-10U
3/4-Pole 5m 6 M8PSL-3†6P-5U^^
3/4-Pole 10m 6 M8PSL-3†6P-10U
3/4-Pole 5m 8 M8PSL-3†8P-5U^^
3/4-Pole 10m 8 M8PSL-3†8P-10U
3/4-Pole 5m 10 M8PSL-3†10P-5U^^
3/4-Pole 10m 10 M8PSL-3†10P-10U
Single Occupancy v Double Occupancy * For PUR version cables replace V with U e.g. M8FS-3U-3
Single Occupancy: Contains one signal
LIMIT & PRESSURE SWITCHES & SENSORS 1...+24V, 3...0V, 4...I/O(A), 5...PE ** For 1.5m, 5m or 10m Cable lengths replace 3 with 1.5, 5 or 10
Double Occupancy: Contains two signals e.g. M8F3-3V-5
1...+24V, 2... I/O(B), 3...0V, 4...I/O(A), 5...PE
^^ For M23 plug types replace U with M23 e.g. M8PSL-34P-M23
†For Double Occupancy Boxes, replace PSL-3 with PDL-4 e.g.
M8PDL-44P-5U^^
Note: 4-Pole units are Double Occupancy Boxes
M12 PNP/NPN Sensor Actuator Boxes Single or Double Occupancy.
Cable or M23 Plug Versions with LED’s IP67
Poles Cable Length Ports Code
5-Pole 5m 4 M12P†SL-54P-5U^^
5-Pole 10m 4 M12P†SL-54P-10U
5-Pole 5m 6 M12P†SL-56P-5U^^
5-Pole 10m 6 M12P†SL-56P-10U
5-Pole 5m 8 M12P†SL-58P-5U^^
5-Pole 10m 8 M12P†SL-58P-10U
Single Occupancy v Double Occupancy ^^ For M23 plug types replace U with M23 e.g. M12PSL-54P-M23
Single Occupancy: Contains one signal For Double Occupancy Boxes, replace S with D e.g. M12PDL-54P-5U
1...+24V, 3...0V, I/O(B), 5...PE † For NPN versions replace P with N e.g. M12NSL-54P-M23
Double Occupancy: Contains two signals
1...+24V, 2...I/O(B), 3...0V, 4...I/O(A), 5...PE SCA
331
SENSOR CABLES & CONNECTORS
Poles M12 Y Straight Distributor Connector IP67 Poles M12 T Straight Distributor Connector IP67
3-Pole M12MS-3M12-Y1 3-Pole M12MS-3M12-T1
4-Pole M12MS-4M12-Y1 4-Pole M12MS-4M12-T1
5-Pole M12MS-5M12-Y1 5-Pole M12MS-5M12-T1
PG7 PG7
Poles M8 Female Screw Connection Straight IP67 Poles M8 Male Screw Connection Straight IP67
3-Pole M8FS-3PG7-M 3-Pole M8MS-3PG7-M
4-Pole M8FS-4PG7-M 4-Pole M8MS-4PG7-M
Poles M12 Female Screw Connection Straight IP67 Shielded Poles M12 Male Screw Connection Straight IP67 Shielded
3-Pole M12FS-3PG7-M^ 3-Pole M12MS-3PG7-M^
4-Pole M12FS-4PG7-M^ 4-Pole M12MS-4PG7-M^
5-Pole M12FS-5PG7-M^ 5-Pole M12MS-5PG7-M^
Poles M12 Female Screw Connection Right Angled IP67 Shielded Poles M12 Male Screw Connection Right Angled IP67 Shielded
3-Pole M12FR-3PG7-M^ 3-Pole M12MR-3PG7-M^
4-Pole M12FR-4PG7-M^ 4-Pole M12MR-4PG7-M^
5-Pole M12FR-5PG7-M^ 5-Pole M12MR-5PG7-M^
Poles M12 Male Straight Y Connector IP67 Poles M12 Male Straight Y Connector IP67 LIMIT & PRESSURE SWITCHES & SENSORS
3-Pole -
3-Pole - 4-Pole M12Y-4MS3**-2M12-3FSV*
4-Pole M12Y-MS4-V*3** Sensor Cable
WIR
Poles M8 Female Staright to M12 Male Straight IP67 Code Description
3-Pole M83FS-1.5**-M12-3MS-V* WS-3 3 core x 0.34mm2 grey cable, core colour
4-Pole M84FS-3**-M12-4MS-V* WS-4 4 core x 0.34mm2 grey cable, core colour
^ For Shielded versions replace M with SH e.g. M12FS-3PG7-SH WS-5 5 core x 0.34mm2 grey cable, core colour
SCA 332
LOUDSPEAKERS
Megaphones
GT-1225 Watts Effective Power Source Power
RMS Distance Duration
Code Description
GT-1225 Hand Grip / Shoulder Type Megaphone 20 600m UM-2 Dry Cell Batteries (10) ±7 hrs
GT-125 GT-125 Hand Grip Type without Siren 20 600m UM-2 Dry Cell Batteries (10) ±7 hrs
GT125S
GT-125S Hand Grip Type with Siren 20 600m UM-2 Dry Cell Batteries (10) ±7 hrs
Other Speakers
Code Description Watts Imp. Input Watts
RMS Line Adj.
CM-20 Aluminium Column Speakers weather proof IP65 20 4 OHM 100V 1, 1.25, 2.5, 5, 10,
c/w side mount bracket 20
CM-40 Aluminium Column Speakers weather proof IP65 40 8 OHM 100V 1, 1.25. 2.5, 5. 10,
c/w side mount bracket 20, 40
SPH-20W White Plastic Sphere Ceiling Speaker with 3 metre 20 8 OHM 100V 2.5, 5, 10, 20
cable
SPH-20
White Plastic Sphere Ceiling Speaker with wall 20 8 OHM 70/100V 2.5, 5, 10, 20
CM20/40 SPH-20WMT-W mount bracket
WS-10 Dual Cone/coaxial wall cabinet speaker complete 10 8 OHM 100V 0.25, 0.5, 0.75,
with back mount box IP21 8 OHM 100V 1.5, 3, 6, 10
MR-10 Weather Proof IP66 horn speaker complete with 10 1, 3, 5, 10
stainless steel bracket Adj. Rotary Switch
WS-10 MR-15 Weather Proof IP66 horn speaker complete with 15 8 OHM 100V 1, 3, 5, 10, 15
stainless steel bracket Adj. Rotary Switch
MR-30 Weather Proof IP66 horn speaker complete with 30 8 OHM 100V 1, 3, 5, 10, 15, 30
stainless steel bracket Adj. Rotary Switch
MR-10/15/30 These robust, yet elegantly attractive loudspeakers are designed to give high quality sound reproduction and
can be used in airports, churches, small theatres and other places of entertainment.
Outdoor Speakers
AUDIO & VISUAL ALARMS Code Description Watts Imp. Input Frequency
RMS Line Range
CP-20A Green Lawn Loudspeaker, size: Ø 220 x 420Hmm IP65 20 8 OHM 120V 70-12KHz
TF-35 CP-20B Green Lawn Loudspeaker, Ø 220 x 600Hmm IP65 20 8 OHM 120V 70-12KHz
TF-220 CP-20 8 OHM 120V 70-12KHz
Q130-5 8 OHM 120V 95-12KHz
Green Lawn Loudspeaker, size: Ø 282 x 340Hmm IP65 20
Ceiling Speaker Ø 170 x 700Hmm 5
CP-20A CP-20 TF-35 ABS and Metal Casing. 960H x 190W x 170Dmm 35 8 OHM 120V 70-12KHz
CP-20B Q130-5 TF-220 ABS and Metal Casing. 460H x 220W x 215Dmm 20 8 OHM 120V 70-12KHz
333 ALL
LOUDSPEAKERS
Horn Speakers
Code Description Watts Imp. Input Watts
RMS Line Adj.
–
KPH-86T Black ABS Horn Speaker 15W 8 OHM – –
KPH-86T 15W 8 OHM – –
KPH-210R KPH-200T-8 20W 8 OHM – –
PH-711 KPH-280 KPH-200T-8 White ABS Horn Speaker 30W 8 OHM – –
30W 8 OHM – –
WS-631T YX5-44T KPH-210R White ABS Horn Speaker 40W 8 OHM –
YX3-33T Watts
G165-3 KPH-280 White ABS Horn Speaker Adj.
G165-5 2, 4, 6W
PH-58 PH-58 White ABS Horn Speaker
White ABS Horn Speaker –
PH-711
–
Ceiling Speakers
Code Description Watts Imp. Input
WS-631T RMS Line
YX5-44T
YX3-33T White Wall Flush/Ceiling Speaker with 10W 5k, 2.5k, 100V
built-in Line Transformer 230Ø x 74mm 1667 OHM
Ceiling Speaker, Ø 245mm x 110mm, 8W 8 OHM 100V
max 10W White 70-12KHz
Ceiling Speaker, Ø 200mm x 115mm, 3W 8 OHM 100V
max 8W White 100-12KHz
Wall-Mount Speakers
CS-667WT White Wall Surface/Ceiling Speaker with 6W 5k, 2.5k, 100V 2, 4, 6W
built-in Line Transformer. 240 x 240 x 115 1667 OHM
SPJ-53WHBS White PA Sound Projector Speaker - 20W 2k, 1k, 100V 5, 10, 20W
140 Ø x 187 15W 500 OHM 100V 5, 10, 20W
CS-667WT CT-315WT1 CT-315WT1 Wall Mount Bass Reflex 2-Way Speaker 3W 4k, 2k, 1k,
G165-9 SPJ-53WHBS System with Built-in Line Transformer. 5W 667 OHM
180 x 133 x 107mm. 8 OHM/ 20W not
going through 200V
G165-3 Box Speaker Wall Mount. 8 OHM 100V 5, 10, 20W
275H x 200W x 105Dmm
G165-5 Box Speaker Wall Mount. 8 OHM 100V 70-12KHz
275H x 180W x 125Dmm
G165-9 Wall Mount Speaker max 10W 10W 8 OHM 100V 70-12KHz
PA Amplifiers
Code Description Watts Power Supply Output
RMS
BAP-120 BAP-120 8A PA Booster Amplifier 120W 115/230VAC 100V, 70V,
(19” Rack/Desk-top Mounting) 240W 50/60Hz, 24VDC 8Ω
BAP-240 60W
120W 115/230VAC 100V, 70V,
BAP-240 15A PA Booster Amplifier 50/60Hz, 24VDC 8Ω AUDIO & VISUAL ALARMS
(19” Rack/Desk-top Mounting) 30W
60W 115/230VAC 100V, 70V,
MIP-60E MIP-60E 4A PA Multi-zones Amplifier 120W 50/60Hz, 24VDC 8Ω
(19” Rack/Desk-top Mounting)
115/230VAC 100V, 70V,
MIP-120E 8A PA Multi-zones Amplifier 50/60Hz, 24VDC 8Ω
(19” Rack/Desk-top Mounting)
MIP-120E 5 Channel + Master
DV-45PA DV-45PA PA Amplifier 220VAC/12VDC 4, 8, 16 OHM
2 Mic + 1 Aux Input (Without 100V)
220VAC/1A 100V/4, 8, 16 OHM
DV-80PA DV-80PA PA Amplifier 12VDC/10A
3 Mic + 2 Aux Input 220VAC/1.5A 100V/4, 8, 16 OHM
12VDC/10A
DV-120PA DV-120PA PA Amplifier 334
3 Mic + 2 Aux Input
ALL
MICROPHONES & ACCESSORIES
Wall Mount Autoformer Volume Control Communication Microphone
With Volume Control
Code Watts Power Specifications Code CM-361VC
VC-5093P RMS 100V
VC-5096P 6 100V • D esigned for Emergency announcements Polar Pattern: Uni-Directional
or paging
VC-5093P/VC-5096P 35 Frequency Response: 100-10.000Hz
• Mounting depth: 44mm
• W orks with 4 or 8 OHM Speakers Impedance: 600+30%
• M aterial: Plastic front panel with plastic knob
Sensitivity: -69dB+3dB
Cord Length: 1.8m
Code Volts (V) Power Rating Impedance (Ω)
AUTO 100/5 100 5-2.5-1.25W 2K-4K-8K
1K-2K-4K
AUTO 100/12 100 10-5-2.5W
• Wide frequency response and low insertion loss
Professional 2-Way Speaker System Microphone Microphone Clip
Table Top Stand
Code PRO-200AMP Code MC0004
Code MD-13
Drivers 15” Woofer + 25mm Horn Tweeter Plastic tiltable head
• Height extends Fixed with screw
Frequency Range 40-20,000Hz from 41 to 54cm head for microphone
stand.
Power Supply 100-240VAC • 5/8” x 27 thread
• Iron cast base
Power Output 200W • Weight: 0.83kg
Includes MP3, FM, SD Card Input
Teller Main Control Unit
Code MBI-05H (Pair with MBI-03) Code MBI-10 (Pair with MBI-11)
Features • Built-in mute function and headset function Features
• Priority conversation • Full manual control
• Compact & slim design
• Hands-free communication • Stainless Steel Casing
• Built-in Aux output for P.A System
• Stainless Steel Casing • Volume control for teller & customer
• Power Source: DC 12V
• Volume control for teller & customer • Power light indicator
• OFF and TALK switch
• Power Source: DC 12V • Dimensions: 75(W) x 40(H) x 96(D)mm
• Dimensions: 155(W) x 43(H) x 130(D)mm
Specifications for MBI-05/10
Built-in headset • Power: DC12V 230mA
and mute functions • Type: Condenser Mic
• MIC Hz: 100 - 16 000Hz- Spare Control Box
• Sensitive: -40 ± 2dB Code MBI-10CBOX
Accessories - Customer Units / Speakers
Code MBI-03 (Pair with MBI-05H) Code MBI-11 (Pair with MBI-10)
3.5mm Stereo Phone Jack to suit MBI-05H
3.5mm Stereo Phone Jack to suit MBI-10
AUDIO & VISUAL ALARMS DIGITAL UHF WIRELESS MICROPHONE
Dual Channel, True Diversity Wireless Microphone - 32 channel with LCD display Spare Microphone
Code EW92KIT Code W101
Mode Digital diversity RF Power Output < 30mW
Sensitivity <5dB @ S/N ≥ 110dB Volume Control 0~15 steps
Frequency 450-900MHz Transmitting Autoscan - PLL synthesized
Power 90~260VAC/DC 15V @ 400mA Battery 9V
Antenna Receiver x 2 Duration 8hrs (continuous)
Display LCD Modulation ±25KHz
Distance 100-180m
Kit Includes: UHF Dual Receiver, 2 x Antennas,
2 x Transmitter Microphones, 1 x AC Adaptor
335 ALL
SMOKE / GAS / HEAT DETECTORS
Resettable Multi Purpose Resettable Multi Purpose Resettable Multi Purpose Resettable Fixed – Photoelectric Smoke
Smoke Detector Smoke & Heat Detector Smoke & Heat Detector Temp/Heat Detector 58°C Detector (Independent Type)
(Relay output) (Relay output) (Relay output/Buzzer) Used in Boats, Caravans,
Computer Rooms & Homes
Code – 2 Wire AH-0311-2 AH-0315-2 – AH-0310-2 AHSS-871
Code – 4 Wire AH-0315-BPS –
AH-0311-4 (Relay output) AH-0315-4 (Relay output) –
Rated Voltage 12VDC 12-30VDC
12-30VDC 12-30VDC 100-240VAC with 9V Battery
or 9V Battery only (included)
Alarm Current 30mA 30mA 80mA 30mA Output Buzzer 85dB
45µA –
Standby Current 40µA 70µA 15mA –
– –
Relay Current 1C/O:0.8A@30VDC, 0.5A@250VAC 1C/O:0.8A@30VDC, 0.5A@250VAC 1C/O:0.8A@30VDC, 0.5A@250VAC 58° C
4m 4-20m 4m 4-20m
Temp. of Detection – 58° C 58° C 30m2 75m2 150m2 75m2
Building Height 4m 4-20m 4m 4-20m 4m 4-20m
Area Covered 150m2 75m2 150m2 75m2 150m2 75m2
Material Fire-Proof Material
Accessories
Detector Test Device c/w Gas Canister AH-TEST
Replacement Gas Canister AH-CAN
AH-TEST Features • Applicable to testing of heat & smoke detectors. • Extension pole is very flexible, it is extendable from 1.44m to 5m.
• With the movable function of test vessel, user can easily overcome the difficulty in reaching the detector during testing.
• The enclosed ignitor is generated by gas, it’s temperature is adjustable and used for heat detectors. • The smoke tester can spray
about 500 times to test smoke detectors
Small fire detection system set for limited areas FIRE DETECTION SYSTEM
(small shops, houses,etc). IP20
State of the art analogue address fire detection control
panel, suitable for medium and large installations.
(hotels, malls, factories, etc). IP30
BSR-6055/A BSR-8013/A
BSR-6060/A BSR-8019/A
BSR-2143
Kit Includes: BSR-5036/A
2 x detectors, call point, siren with beacon + battery SY1270
Code BS-1619 (kit) BSR-2104
Description Fire detection 2-zone Analogue addressable fire detection 2 loops, 96-zone
Operating Voltage 220-240VAC/50-60Hz 220-240VAC/50-60Hz BSR-2000 BSR-2142
BSR-8018
Battery 12V/7Ah sealed SY1270 2 x 12V/7Ah sealed SY1270 BSR-5031 AUDIO & VISUAL ALARMS
27.6V/600mA BSR-5031/WP
Charging Circuit 13.8V/400mA
Loop Circuit – 24V/200mA
Siren Circuits – 4 circuits 24V/500mA
Outputs 2 alarm relay output Voltage (24V), 6 Relay, Fault, Alarm
Dimensions 325 x 240 x 80mm 480 x 410 x 154mm
Fire Alarm Devices/Accessories for BSR-1116
Code Description Code Description
Addressable fire detection call point Waterproof fire alarm siren with beacon
BSR-5036/A Addressable analogue optical smoke detector BSR-5031/WP Thermal printer for BSR-2104
BSR-6055/A Addressable conventional device driving unit BSR-2142 Addressable input/output unit with AUX relay
BSR-8013/A Addressable unit input with relay BSR-8018 Heat of rise detector
BSR-8019/A Addressable fire alarm with beacon BSR-6060/A Repeat panel
BSR-5031 Programming tool for BSR-6055/A BSR-2000 Battery for panels 12V/7Ah
BSR-2143 SY1270
ALL 336
AUDIBLE & VISUAL ALARMS AND DETECTORS
LED Red Flasher LED Flasher & Alarm Buzzer Alarm Strobe & Siren Fire Horn/Strobe
12VDC 12VDC 250mA 12-30VDC 250mA 12VDC 250mA 24VDC 100mA
100mA
100dB 125dB 100dB 112dB
HC-901 HC-902 HC-903 HPE-106A IM-86
Bells – Red, 10 min duty cycle (not suitable for fire bells)
Voltage 4" 100mm 6" 150mm 8" 200mm
100mmØ 150mmØ 12VDC BL101 B15012DC B20012DC
200mmØ 24VDC BL102 B15024DC B20024DC
24VAC BL105 B15024 B20024
115VAC BL103 B15110 B200110
230VAC BL104 B15230 B200230
dB @3m 90 95 95
Fire Alarm Bells – Continuous rated
150mmØ Voltage 6" 150mm 8" 200mm
200mmØ
12VDC HC-6012 HC-1012
24VDC HC-6024 HC-1024
24VAC – –
115VAC HC-6120 HC-1120
230VAC HC-6220 HC-1220
dB @3m 96 96
HC-BB*
*Weatherproof Box IP65 for HC Bells only HC-BB
Break Glass Manual Call Point - Manual Call Point - Manual Call Point -
Fire Gas Release Door Release
Code FD03 AH-0217-R AH-0217-Y AH-0217-GR
Size (mm) 87 x 87 x 52 88 x 88 x 52 88 x 88 x 52 88 x 88 x 52
Manual Call Point Gas Detector Household Gas Detector Carbon Monoxide Detector
AUDIO & VISUAL ALARMS Code AH-9717 AHG-982-12B LH-83 CO-80LED
Size (mm) 140 x 45 120 x 70 x 35 120 x 70 x 40
Power Supply: 3* AA batteries (Incl.)
Power: 24VDC/30mA Power Type: Control Panel, Power: 230VAC 5W Sensitivity/Alarm Time:
When button is pressed, the fire individual (110-230VAC adaptor) Alarm Mode: Within 60~90 minutes @ 50ppm CO
alarm signal is activated. Alarm Sound: 85dB/m and above - flash & sound alarm concentration; Within 10~40 minutes
Phone-jack and reset buttons Sensitivity: 0.05-0.30% - shut off gas valve @100ppm CO concentration; Within
behind cover. Detection type: natural gas & - auto reset 3 minutes @ 300ppm CO concen-
propane gas Sensitivity: 15% LEL tration;
Detection Type: Natural gas & LPG Audibility: 85dB@1m
337 ALL
ELECTRONIC SOUNDERS & BEACONS
Code Operating Rated Max Current Min Sound IP Tone
Voltage Voltage at Rated at Rated Rating
Range Voltage (mA) Voltage
(dB@1mt)
MICRO RED 9-30VDC 12/24VDC 9mA 95 IP42 28 Tone
MICRO WHITE 9-30VDC 12/24VDC 9mA 95 IP42 28 Tone
The MICRO has an ultra low current, ideal for use with the limited power a vailable from loop driven
MICRO RED MICRO WHITE systems Ø102mm
AS262
Buzzers and Electronic Sounders
Panel Mounting 30mm Ø • Adjustable Volume • 3-Wire control to select sweeping or steady tone
AS262 9-28VDC 24VDC 18mA 102 max IP65 2 Tone
EAGLE Electronic Sounders
• Adjustable volume
• 32 Tones selectable – 5 DIP switches (only 2 tones for SB1)
• 3-wire control to select 2-tones
Shallow Base 93mm Ø x 63mm H (mainly used for fire alarms)
EAGLE S1 EAGLE S1W EAGLE S1 9-28VDC 24VDC 18mA 106 max IP54 32 Tone
EAGLE S1W 9-28VDC 24VDC 18mA 106 max IP54 32 Tone
EAGLE S2/3
EAGLE S1-D Deep Base 93mm Ø x 105mm H (for surface conduit entry)
EAGLE S1-D 9-28VDC 24VDC 18mA 116 max IP65 32 Tone
EAGLE S2 110-230VAC 230VAC 35mA 116 max IP65 32 Tone
EAGLE S3 110VDC 110VDC 30mA 116 max IP65 32 Tone
Combination Electronic Sounder and Xenon Beacon (60FPM)
Deep Base 93mm Ø x 105mm H
EAGLE SB1 9-28VDC 24VDC 68mA 101 max IP65 2 Tone
EAGLE SB2 110-230VAC 230VAC 60mA 116 max IP65 2 Tone
EAGLE SB3 110-230VAC 230VAC 68mA 101 max IP65 2 Tone
EAGLE SB2 EAGLE Combination Electronic Sounder and Red LED Beacon (60FPM) 2 Tone Beacon
ASSERTA S1/S2 SB1/ SB3/ SB4/ SB5 32 Tone
Deep Base 93mm Ø x 110mm H
ASSERTA SB1/SB2 EAGLE SB4 9-30VDC 24VDC 19mA 101 IP44
EAGLE SB5 110-230VAC 230VAC 19mA 101 IP65
Electronic Sounder - Size: 170mm x 170mm x155mm 120 IP66 42 Tone
120 IP66 42 Tone
ASSERTA S1 9-280VDC 24VDC 40mA
ASSERTA S2 110-230VAC 230VAC 70mA 42 Tone Beacon
42 Tone Beacon
Combination Electronic Sounder and Red XENON Beacon (60FPM)
32 Tone
Size: 174mm x 212mm x132mm 32 Tone
ASSERTA SB1 9-280VDC 24VDC 650mA 120 IP66
ASSERTA SB2 110-230VAC 230VAC 70mA 120 IP66
Electronic Sounder - Size: 136mm x 136mm x132mm
MIDI S1 6-60VDC 24VDC 43mA 110 IP66
MIDI S2 115-230VAC 230VAC 22mA 110 IP66
Combination Electronic Sounder and Red XENON Beacon AUDIO & VISUAL ALARMS
Size: 136mm x 174mm x 132mm
MIDI S1/S2/S3 MIDI SB1/SB2 MIDI SB1 115VAC 115VAC 40mA 110 IP66 32 Tone
MIDI SB2 230VAC 230VAC 35mA 110 IP66 32 Tone
Symphoni Electronic Sounders
SYMPNONI-AV SYMPNONI-L/H • Adjustable volume 100 IP21 3 Tone
• 2 -tone selection by internal link for high output model 120 IP42 32 Tone
Size: Ø110mm x 95mm
100 IP21 6 Tone Beacon
SYMPHONI-L 12-30VDC 24VDC 5mA
SYMPHONI-H 9-28VDC 12/24VDC 240mA
Combination Electronic Sounder and LED Beacon
Size: 147mm x 106mm x 92mm
SYMPHONI-AV 9-28VDC 24VDC 30mA
ALL 338
ELECTRONIC SOUNDERS & BEACONS
Compact Electronic Sounders
ASKARI-S* Code Operating Rated Max Min Sound
Voltage Voltage Current (dB@1mt) IP Rating Tone
Range (mA)
ASKARI-S* 9-28VDC 28VDC 18mA 97 max IP21 32 Tone
* Add colour to code: R (Red) or W (White)
Eagle LED Beacons IP33 9-60VDC Size: Ø93 x 53(H)mm (83mm high with powered base)
Code Description
SOLISTA R
• 2 Output Settings: 0.5cd or 1cd
• 0,5Hz or 1Hz Flash Rate
• Ultra Low Current: 3mA/5mA
SOLISTA R SOLISTA MAXI-* • 3 Output Settings: 0,5/1/3cd (user selectable) Application
• 3 Modes: Single / Double flash and continuous (user selectable)
• Sequence or synchronised flashing
• Low current (3-15mA)
*Add colour to code: ● R (Red), ● A (Amber), ● GN (Green), ● W (White)
MAINS-PB-* Powered base to convert beacon for use with 110/230VAC (Red/White)
SOLISTA MAXI-* MAINS-PB-* *Add colour to code: ● R (Red), ● W (White)
SQUASHNI-S Squashni Sounder
Suitable for use as a fixing base for most fire detectors or as a stand-alone sounder.
Code Operating Rated Max Min Sound IP rating Tone
Voltag Voltage Current (dB@1mt) IP21 8
SQUASHNI-S
Accessories 18-28VDC 24VDC 4-5mA 90db
Code
SQUASHNI-C Description
Top cap (pack of 5) To complete sounder if used alone
TOP CAP Firecat - Fire Sensor
FIRECAT
Code Description
FIRECAT Multi function fire alarm sensor 10-16VDC, 0.5-14mA
Sensing options: Optical, Optical-heat, Heat rate rise, Heat fixed temp
Extremely versatile for use with 12VDC fire alarm systems. See page 336
Eagle Strobe Beacon 60 FPM IP65 Xenon Strobe
Dimensions: 93mm ø x 91(H)mm (121mm H with deep base)
Code Colour Volts Features
FA260R Red ● 9-60VDC
FA260A Amber ● 9-60VDC • Light output: 10cd
FA260G Green ● 9-60VDC • Flash frequency: 1Hz
• Current: 185-45mA (depending on voltage)
FA260C Clear 9-60VDC
85mA @ 24VDC
Code Description
AUDIO & VISUAL ALARMS MAINS-PB-* Powered base to convert beacon for use with 110/230VAC
*Add colour to code: ● R (Red), ● W (White)
Accessories for Assembly of Combinations IP65
Code Description
MAINS-PB-* F107-20 MAINS-PB-* Powered base to convert beacon for use with 110/230VAC
F505-20 EAGLE-DB-* Deep base
EAGLE-SB-* Shallow base
F107-20 Nipple for connection of bases
F505-20 Locking rings for use with nipple (pack of 10)
EAGLE-DB-* * Add colour to code: ● R (Red) or ❍ W (White).
Combinations of any EAGLE sounders or beacons can be assembled using deep or shallow powered
bases and these accessories. Order one nipple & two locking rings for each connection.
339 ALL
MARINE ELECTRONIC SOUNDERS & BEACONS
Marine Sounders
Code Operating Rated Max Min Sound IP Rating Tone
Voltage Voltage Current at Rated
Range at Rated Voltage
Voltage (dB@1mt)
(mA)
EAGLE-MS1
SYMPHONI-MS1 Deep Base 93mm Ø x 93mm H
ASSERTA-MS1 EAGLE-MS1 ● 9-28VDC 24VDC 16mA 102 IP65 32 Tone
110 x 110 x 105mm H
SYMPHONI-MS1 ● 9-28VDC 24VDC 5mA 100 IP66 3 Tone
168 x 168 x 155mm H
ASSERTA-MS1 ● 18-30VDC 24VDC 450mA 120 IP66 42 Tone
(Specifications based on using the products at 24VDC. Sound and current values are tone dependant)
Marine Xenon Beacons (60FPM) - 10cd
Deep Base 93mm Ø x 93mm H
SOLEX-MB1 ● 10-60VDC 24VDC 185-45mA - IP65 -
SOLEX-MB1 Marine LED Beacons (60FPM) IP33 -
SOLISTA-MB1 IP66 42 Tone
Deep Base 93mm Ø x 83mm H
ASSERTA-MSB1
• 3 Output Settings: 0,5/1/3cd (user selectable)
• 3 Modes: Single / Double flash and continuous (user selectable)
• Sequence or synchronised flashing
• Low current (3-15mA)
SOLISTA-MB1 ● 10-60VDC 24VDC 3-15mA -
Marine Combination Sounders and Xenon Beacon
168 x 212 x 155mm H 120
ASSERTA-MSB1 ● 18-30VDC 24VDC *450/620mA
*Current sounder/beacon. Values dependant on settings.
VOICE SOUNDERS
Symphoni Voice Sounder & Beacon Combination
• 15 - 30 mA Current consumption • Flash Rate:1Hz
• Sound Output 87-96dB • Tones: 7 user selectable + No tone option
• Voice Message: 3 standard
(Tone Dependant)
SYMPHONI-AV-W Code Volts IP Rating Colour Flash Colour
SYMPHONI-AV-R SYMPHONI-AV-R 12-28VDC IP21C Red Red
SYMPHONI-AV-WP-R SYMPHONI-AV-W 12-28VDC IP21C White White
SYMPHONI-VOICE-W
Symphoni Voice Weatherproof Sounder & Beacon Combination
Code Volts IP Rating Colour Flash Colour AUDIO & VISUAL ALARMS
SYMPHONI-AV-WP-R 12-28VDC IP66 Red Red
White
SYMPHONI-AV-WP-W 12-28VDC IP66 White
Symphoni Voice Sounder Volts IP Colour Features
9-60VDC IP21 Red
Code 9-60VDC IP21 White • Low current consumption: 8mA max
SYMPHONI-VOICE-R 9-60VDC IP66 Red • Tones: 7 user selectable + No tone option
SYMPHONI-VOICE-W • Voice Message: 3 Standard
SYMPHONI-VOICE-WP-R • Sound Output 87 - 96dB (Tone dependant)
Alarm Pattern Standard Message
Tone, pause, message, pause, 1) In the interest of safety, please evacuate the building now
tone, pause, message.... 2) In the interest of safety, please evacuate the building now
3) Fire, fire, please leave the building! Fire, fire, please leave the building!
ALL 340
AUDIBLE & VISUAL ALARMS
Buzzers & Electronic Sounders
Ø 65mm Operating Rated Max Min Sound
Voltage Voltage Current at Rated
Code Range at Rated Voltage IP Tone
Voltage (dB@30cm) Rating
(mA)
80dB
80mm Signal Devices Fitting 30mm hole 80dB
80dB
ABS-80 BSP 30mm Ø mounting BSP-24VAC 21-26VAC 24VAC 22mA 80dB IP55 Pulse
BSP-24VDC 4-29VDC 24VDC 22mA 85dB IP55 Cont./Pulse
BSP-110AD 30-120VAC 110VAC 20mA 85dB IP55 Pulse
BSP-220AD 60-250VAC 230VAC 10mA 85dB IP55 Pulse
105dB IP44 Buzzer
ABS-80 210-250VAC 230VAC 37mA 105dB IP44 Buzzer
BF30 110VAC 100-120VAC 110VAC 37mA 105dB IP44 Buzzer
BF30 230VAC 210-250VAC 230VAC 37mA IP55 Yodel
85-105dB IP55 Yodel
BF30 BANDIT-F1 10-30VDC 30VDC 25mA 85-105dB IP55 Yodel
30mm Ø mounting BANDIT-F2 85-105dB
BANDIT-F3 110-220VAC 220VAC 20mA IP65 Cont/ Pulse
70dB IP65 Cont/ Pulse
24VAC 24VAC 40mA 70dB IP65 Cont/ Pulse
70dB
22mm Ø Signal Devices Fitting 22.5mm hole Ø 45mm 70dB IP30 Buzzer
WE109 70dB IP30 Buzzer
BANDIT CT-BZ-N WE109 24V 24VAC/ DC – 20mA IP30 LED/Buzzer
CT-BZ WE109 115V 115VAC – 42mA 70dB IP30 LED/Buzzer
WE109 230V 230VAC – 40mA 70dB IP30 LED/Buzzer
70dB
Signal Devices Fitting 22.5mm hole 70dB IP30 Buzzer
IP30 Buzzer
CT-BZ 24V 24VAC/DC – 15mA IP30 LED/ Buzzer
15mA IP30 LED/ Buzzer
CT-BZ 230VAC 230VAC – 20mA
20mA
CT-BZ-N 12V 12VAC/DC – 20mA
CT-BZ-N 24V 24VAC/DC –
CT-BZ-N 230VAC 230VAC –
Signal Devices Fitting 30mm hole x 40 mm depth
CT-BZ30 CT-BZ30 24VAC/DC – 16mA
CT-BZ30-N CT-BZ30 230VAC/DC – 16mA
CT-BZ30-N 24VAC/DC – 16mA
Ø M28 CT-BZ30-N 230VAC/DC 16mA
WE118/119
Signal Devices Fitting 28mm hole
WE118 24V 24VAC/DC – 20mA 90dB IP30 Cont
20mA 90dB IP30 Cont
WE118 30-250VAC 30-250VAC –
WE119 24V 24VAC/DC – 20mA 90dB IP30 Cont/Pulse
90dB IP30 Cont/Pulse
WE119 115V 115VAC – 20mA 90dB IP30 Cont/Pulse
91dB IP45 4 Tone
WE119 230VAC 230VAC – 20mA 91dB IP45 4 Tone
91dB IP45 4 Tone
CYBERTONE-* 12VDC – 25mA 91dB IP45 4 Tone
91dB IP45 4 Tone
CYBERTONE-* 24VDC – 13mA
CYBERTONE-* 32VAC/DC – 13mA
CYBERTONE CYBERTONE-* 48VAC/DC – 13mA
27.7mm Ø mount
WE382 CYBERTONE-* 110VAC – 13mA
AUDIO & VISUAL ALARMS * Add voltage to code (e.g. CYBERTONE-12VDC)
All Purpose Installation Buzzer (fixing M3 thread) Ø 54.5 x 35.5mm depth
WE382 12VDC 12VDC – 150mA 90 IP30 Buzzer
Buzzer
WE382 24VDC 24VDC – 70mA 90 IP30 Buzzer
Buzzer
B8S WE382 115VAC 115VAC – 15mA 90 IP30 Buzzer
B3S Single
WE382 230VAC 230VAC – 15mA 90 IP30 Single
B8S1120L 6-16VDC 12VDC 20mA 80 IP44 Siren
Siren
B3S3240L 1-28VDC 24VDC 20mA 100 IP44 Siren
Siren
B3S120L 1-13VDC 12VDC 30mA 105 IP44
B18R3 B19R3 B18R3120L 6-15VDC 12VDC 100mA 107 IP44
B18R3240L 16-28VDC 24VDC 100mA 107 IP44
B19R3120L 6-15VDC 12VDC 120mA 110 IP44
B19R3240L 16-28VDC 24VDC 120mA 110 IP44
341 ALL
MOTOR DRIVEN SIRENS
Klaxon Industrial Motor Driven Sirens
AS100M Code Operating Fre- Max Approx Min Sound Duty IP
Mono 72 Voltage quency Current Audible at Rated Cycle Rating
Range (Hz) at Rated Range Voltage
Voltage (dB@1m)
1800Hz (mA)
1800Hz
Mono 72 Duty Cycle Continuous
AS100M-115 115VAC/DC
AS100M-230 230VAC/DC 1A 800m 120 100% IP65
Duplo 0.5A 800m
AS200M 120 100% IP65
Duplo
Duty Cycle Continuous
AS200M-115 115VAC/DC 1600Hz 2.7A 1200m 127 100% IP65
AS200M-230 230VAC/DC 1600Hz 1.2A 1200m 127
100% IP65
Super M
AS300M Duty Cycle Continuous
Super M
AS300M-115 115VAC/DC 1680Hz 2.7A 1000m 127 100% IP55
AS300M-230 230VAC/DC 1680Hz 1.0A 1000m 127 100% IP55
SO4 - Low Frequency Duty Cycle Continuous
AS400M-230 230VAC/DC
900Hz 1.4A 1500m 125 100% IP65
AS400M • Dustproof & Weatherproof when correctly mounted
SO4 • Very high sound output in compact size
• Suitable for wall or pole mounting
• Robust construction suitable for use in harsh environments
Motor Driven Sirens (Die-cast Aluminium)
Code Volts Frequency Max Audible Min Sound IP
(Hz) Current Range at Rated Duty Rating
at Rated Voltage Cycle
MS1-45 MS1-45 230V 230VAC/DC 1300 Voltage 500m (dB@1m) IP44
MS2-114 MS1-45 110V 115VAC/DC 1300 (A) 500m IP44
MS2-115 MS1-45 24V 24VAC/DC 1300 0.32 500m 112 15min IP44
MS1-45 12VDC 12VDC 1300 500m IP44
MS2-114 230V 230VAC/DC 650 0.56 1000m 112 15min IP44
MS2-114 110V 115VAC/DC 650 1000m IP44
MS2-114 24V 24VAC/DC 650 1.85 1000m 112 15min IP44
MS2-114 12V 12VAC/DC 650 1000m IP44
3.75 112 15min
0.9 114 15min
1.6 114 15min
5.9 114 15min
11.7 114 15min
For Marine Use (Die-cast aluminium)
MS2-114C 24V 24VAC/DC 650 5.9 1000m 114 15min IP44
MS2-114C 12V 12VAC/DC 650 11.7 1000m 114 15min IP44
With Cap for Outdoor Mounting (Die-cast aluminium with ABS base)
MS2-115 230V 230VAC/DC 650 0.9 1000m 114 15min IP44
15min IP44
MS2-115 110V 115VAC/DC 650 1.6 1000m 114 15min IP44
15min IP44
MS2-115 24V 24VAC/DC 650 5.9 1000m 114
MS2-115 12V 12VAC/DC 650 11.7 1000m 114 AUDIO & VISUAL ALARMS
SIRENCO BLASTER
Blaster - A multi-purpose audible signal device, used for personal protection or sporting activities and as a back
up alarm for industry, shopping centres and other public places. Supplied with 1 x gas canister.
Code Noise No. of Short Canister Size Weight Spare Canister
Blasts
BLASTER04 115Db 20 40ml 80g SSSCN18
BLASTER02 115Db 100ml 160g SSSCN20
BLASTER03 127Db 50 135ml 244g SSSCN19
BLASTER01 127Db 300ml 444g SSSCN21
Accessories 60
120
Code Description
SSSCN22 Blaster wall mounting box with lid 290H x 150W x 130Dmm
ALL 342
MANUAL & MOTOR DRIVEN SIRENS
Code Operating Fre- Max Min Sound Duty IP
Voltage quency Current at Audible at Rated Cycle Rating
Range (Hz) Rated Range Voltage
Volts (mA) (dB@1m)
Hand Operated Sirens
H150 – 500 – 1000m 112 100% IP44
H200
– 500 – 2000m 120 100% IP44
H200 Two Tone Siren selectable
Motor Driven Sirens 50% duty cycle = 15 min on/15 min off of 30 min cycle
MS-6-95 12VDC 12VDC 1300 3.35A 500 -1000m 112 50% IP44
MS-6-95 24V 24VAC/DC 1300 1.6A 500 -1000m 112 50% IP44
MS-6-95 110V 110VAC/DC 1300 0.48A 500 -1000m 112 50% IP44
MS-6-95 230V 230VAC/DC 1300 0.26A 500 -1000m 112 50% IP44
BAN-250 110V 110VAC 1400 0.8A 250m 100 50% IP44
MS-6-95 BAN-250 230V 230VAC 1400 0.4A 250m 100 50% IP44
MINIWATT/S 12V 12VAC/DC 1000 0.83A 300-500m 98 50% IP44
BAN MINIWATT/S 24V 24VAC/DC 1000 0.41A 300-500m 98 50% IP44
MINIWATT 115V 115VAC/DC 1500 0.30A 300-500m 103 50% IP44
MINIWATT 230V 230VAC/DC 1500 0.45A 300-500m 103 50% IP44
Plastic Housing † Duty Cycle 5min On - 10min Off
MINIWATT/S 500SL 12V 12VAC/DC 1150 10.6A 500m 107-112 † IP45
500SL 24V 24VAC/DC 1400 7.5A 500m 107-112 † IP45
MINIWATT 500SL 115V 115VAC/DC 1100 1.0A 500m 107-112 † IP45
500SL 500SL 230V 230VAC/DC 1400 0.7A 500m 107-112 † IP45
1000SL 12V 12VAC/DC 900 17.4A 1000m 114-117 † IP45
1000SL 24V 24VAC/DC 900 8.8A 1000m 114-117 † IP45
1000SL 115V 115VAC/DC 1000 1.9A 1000m 114-117 † IP45
1000SL 230V 230VAC/DC 1000 1.0A 1000m 114-117 † IP45
Aluminium Housing ★ Duty Cycle 1min On - 8min Off
1000S* 12V 12VAC/DC 950 9.0A 1000m 113 ★ IP65
1000SL 1000S* 24V 24VAC/DC 950 6.0A 1000m 113 ★ IP65
1000S* 110V 110VAC/DC 950 1.5A 1000m 113 ★ IP65
1000S 1000S* 230V 230VAC/DC 950 0.5A 1000m 113 ★ IP65
*For combination unit with either Xenon tube or LED (LED not available in Blue & Green). Add /L for LED or /X for
Xenon Tube. Only available in 1000 series. Available colours: R (Red), G (Green), B (Blue), A (Amber)
Aluminium Housing Duty Cycle 10 Hours On , 1 Hour Off
1000D 110V 110VAC/DC 950 2A 1000m 116 95% IP65
1000S/X/4 1000D 230V 230VAC/DC 950 1A 1000m 116 95% IP65
1000D 24V 24VAC/DC 950 5.25A 1000m 113 95% IP65
Long Range Duty Cycle Continuous
1500S 110V
1000D 1500S 230V 110VAC/DC 1600 5.0A 1500m 122 100% IP55
2000D 2000D 110V 230VAC/DC 1600 3.5A 1500m 122
2000D 230V 110VAC/DC 370/660 3.0A 2000m 121 100% IP55
3000S 230V 230VAC/DC 370/660 2.2A 2000m 121
AUDIO & VISUAL ALARMS 3000S 400V 230VAC 560 9.0A 3000m 125 100% IP55
3000S 525V 400VAC 560 1.1kW 3000m 125
5000S 230V 525VAC 560 1.1kW 3000m 125 100% IP55
5000S 400V 230VAC 560 2.2kW 5000m 130
1500S 5000S 525V 400VAC 560 2.2kW 5000m 130 100% IP55
10000D 400V 525VAC 560 2.2kW 5000m 130
10000D 525V 400VAC 560 4kW 10km 140 100% IP55
15000D 400V 525VAC 560 4kW 10km 140
15000D 525V 400VAC 480/560 7.5kW 15km 145 100% IP55
525VAC 480/560 7.5kW 15km 145
100% IP55
100% IP55
100% IP55
100% IP55
3000S 100% IP55
5000S
10000D 100% IP55
15000D 100% IP55
343 ALL
AUDIBLE & VISUAL ALARMS
Hooter (Thermoplastic ABS Trumpet) High Power
Code Voltage Power Min Sound at Duty IP
Range Consumption Rated Voltage Cycle Rating
(dB@1m)
365mm HW36 12VAC 10-14VAC 5.3A 105dB 50% IP45
170mm HW36 24VAC 20-26VAC 2.7A 105dB 50% IP45
HW36 48VAC 44-52VAC 1.7A 105dB 50% IP45
340mm HW36 110VAC 94-121VAC 0.5A 105dB 50% IP45
70mm HW36 230VAC 196-250VAC 0.3A 105dB 50% IP45
80mm Mini Hooter – ABS Grey 190mA 92dB
70mA 92dB
256mm KLH710 24VAC 24VAC 15mA 92dB 100% IP43
KLH710 24VDC 24VDC 15mA 92dB 100% IP43
KLH710 110VAC 110VAC 100% IP43
KLH710 230VAC 230VAC 100% IP43
Marine Horn - very loud
HW571 24VDC 24VDC 600mA 108dB 100% IP65
HW571 230VAC 230VAC 110mA 108dB 100% IP65
Membrane galvanised and epoxy powder coated, screws A4 with isolation, and rubber washers for mounting avoiding
galvanic corrosion, additional membrane sealing, aluminium-die cast epoxy-powder coated RAL 7000/ 7015 housing.
Mini Horn
KDH710 12VDC 12VDC 120mA 92dB 100% IP43
KDH710 24VDC 24VDC 60mA 92dB 100% IP43
KDH710 60VDC 60VDC 20mA 92dB 100% IP43
KDH710 110VAC 110VAC 20mA 92dB 100% IP43
KDH710 230VAC 230VAC 15mA 92dB 100% IP43
Mini Horn for Lifts 83
83
KDHL-6VDC 6VDC 65mA 100% IP43
KDHL-12VDC 12VDC 33mA 92 100% IP43
92
Hooter and Xenon Strobe Combo – ABS Grey 92 100% IP43
Ø70mm 92 100% IP43
KLF710-* 110VAC 94-120VAC 0.04A 100% IP43
AUDIO & VISUAL ALARMS100%IP43
KLF710-* 230VAC 196-250VAC 0.025A
KLF710-* 12VDC 10-14VDC 0.3A
KLF710-* 24VDC 20-28VDC 0.17A
*Add colour: ● R (Red), ● G (Green), ● A (Amber).
Phone Ringer Module For Standard 2 Wire Analogue Phones Only
HW-SHTR001
Electronic module for external ringer using KLH710 230VAC hooter or any
other electronic siren
Telephone Electronic Sounder For Standard 2 Wire Analogue Phones Only
Code Type Supply Consum- Dimensions Sound IP
Voltage ption Output@1m Rating
IP20
BS-500 Sounder 230VAC 6W 92Ø x 98mm 80-105dB
6W IP20
BS-505 Sounder + Beacon 205 x 100 x 57mm 80-105dB (Adj)
BS-500 • Connected in parallel with the telephone • Adjustable volume control
BS-505 • No need for additional relays • Supplied c/w mounting bracket
Sirenco Air Horns IP44 Robust aluminium sirens with 100% duty cycle air operated motors. Designed to with-
stand harsh environments. Meets the warning needs of S.A. Transport, Marine and industrial applications where
air pressure of 7bar or between 350-1000Kpa is available.
SSAH370 SSAH660 Code Motor Sound Frequency Range Weight Size (mm)
Air Driven 138dB at 1m 370Hz 3000m 2.8kg 330 x 205 x 180
SSAH370 Air Driven 138dB at 1m 660Hz 3000m 2.4kg 180 x 210 x 150
SSAH660
ALL 344
AUDIBLE ALARMS
Loud DC Sirens
Code Volts IP dB Tone Rated Colour
Current
ESB-6 6-13VDC 55 114 Warble 300mA ● Black
65 105 Warble 300mA ● Black/Red
KPS-1500 ESB-6 KPS-1500 6-15VDC 55 107 6 Tone 550mA ❍ White
KPS-124 55 108 Warble 90mA ● Black
KPS-100T KPS-112 6-14VDC 55 116 Warble 1100mA ❍ White
KPS-112 55 104 Warble 550mA ● Black
KPS-124 15-24VDC 65 105 Warble 550mA ❍ White
KPS-100T 6-14VDC
KPS-104 6-15VDC
KPS-6000 6-15VDC
Siren with Battery Back-up
KPS-72 6-14VDC 55 112 Warble 1100mA ● Black
KPS-104 Wire colours R+, BL-, Blue-Trigger, White-Trigger
KPS-72 KPS-6000
BaBck-AupCAlKert-foUr FPorkALiLft AIP6R5 MS
Back-up Alert for Fork Lift
Code Volts IP dB Tone Rated Current Colour
AP-9805 10-80VDC 65 97
Back-up 400mA ● Black
TK-428 AP-9805 TK-428 6-12VDC 65 126 Back-up 650mA ● Black
TK438
Back-up Alert / Flasher Combination - 90 flashes/min
Code Volts IP dB Tone Rated Current Colour
TK-438/R 6-12VDC 65 126 Back-up 800mA ● Red
TK-438/A 6-12VDC 65 126 Back-up 800mA ● Amber
Surface Mounting Back-up Alarm - IP67
Code Voltage Size (mm) Db (1.2m) Connector
PL-638 12-24VDC 86 x 100 x 41mm 97 Stud Terminals
• Surface mount alarm offers a wide range of mounting options
• Rugged ABS housing provides durability
• Protected from vibration and moisture ingress
High Output Back-up Alarm - IP67
Code Voltage Size (mm) Db (1.2m) Connector
Stud Terminals
PL-8628 12-24VDC 85 x 101 x 49mm 107
Connector
• High level audio output Stud Terminals
Stud Terminals
AUDIO & VISUAL ALARMS • Use for areas of high ambient noise
• Rugged nylon housing for durability
• Protected from vibration and moisture ingress
• Meets SAE J994 standards covering high pressure washing
Smart Self-Adjusting Back-up Alarms - IP67
Code Voltage Size (mm) Db (1.2m)
97 - 112
PL-8668C PL-8668C 12-24VDC 78x127x96 77 - 102
PL-628B PL-628B 12-24VDC 70x102x41
345 • Monitors ambient background noise and automatically adjusts volume
• Rugged nylon housing for durability
• Protected from vibration and moisture ingress
• Meets SAE J994 standards covering high pressure washing
ALL
SIGNAL TOWERS IP66
Light Modules • Modular design in 40mm and 70mm for universal applications
• Based on latest LED technology
• Excellent cost/ performance ratio
• Easy to operate connection technique (bayonet type)
• Very long life span due to maintenance free LED
• Comprehensive range of mounting options
• Maximum No of modules = 5 (10 with double bracket XZV/ZZV)
• PLC friendly (controlled leakage and inrush currents)
• Multistrobe versions - irregular strobe pattern with no
familiarisation effect
Pictures for display only, all items should be ordered separately
Code 70mmØ XLL-* XDC-*-** XDA-*-** XDF-*-** -
Code 40mmØ ZDC-*-** ZDA-*-** ZDF-*-** ZFF-*-**
ZLL-* LED steady on LED Flashing LED Strobe LED Multi-strobe
Description Irregular Strobe
Incandescent Pattern
steady on
(Order lamp 1-2.6Hz
separately)
Flash Freq - - 2Hz 1.4Hz
*For Lens colour add to code: ● A (Amber), ● R (Red), ● C (Clear), ● B (Blue), ● G (Green), ● Y (Yellow)
** Add voltage to code: 24 (24VAC/DC), 110 (110/120VAC), 230 (230/240VAC)
Accessories
Code Description
ACL61-* Spare filament lamp 6-7W BA15d add voltage to code 24V, 110V or 230V
ACL ACL62-* Spare filament lamp 4W BA15d add voltage to code 24V, 110V or 230V
LWW LWW Lamp replacement tool for use with 40mm modules
Sound Modules Bases & Mountings - c/w cap to complete signal tower
70mmØ Sound 40mmØ Sound
Module Module
Code 70mmØ XDE/** XDZ ** XDM/** XMW XMS XMF XMV XZV
Code 40mmØ ZMW ZMV ZZV
ZDE/** - - Mounting ZMS ZMF Wall mounting Wall mounting
Description Base base base
Continuous or Continuous and 8 Tones (2 x Internal Mounting Base Mounting base Double-sided
70mm Holes)
40mm Pulsing Pulsing selectable c/w fixed flange type
2.8kHz@100db 2.8kHz@100db 0.5kHz@100db mounting screws
4kHz @ 80db - -
** Add voltage to code: 24(24VAC/DC), 110(110/120VAC), 230(230/240VAC)
Pole Bases & Mountings - c/w cap to complete signal tower AUDIO & VISUAL ALARMS
Code 70mmØ XMR* XWR XSW* XFR*
Code 40mmØ ZMR* XSS
ZSW*
Description Pole mount base Wall Mount Bracket (Plastic) Pole mount base with ZFR*
with plastic foot for use with XMR/ZMR Wall Mount Bracket (Metal) Pole mount base with
M20 thread
for use with XSW/ZSW quick mount foot adaptor
*Add length to code: 2(100mm) 3(250mm) 4(400mm)
346
ALL
SIGNAL TOWERS IP44
FILAMoErLNETD Description Lamp Code
Colour Type
1-Way 2-Way 3-Way 4-Way 5-Way
Continuous Filament R R-Y R-Y-G R-Y-G-B R-Y-G-B-W
Flashing Filament LM-1* LM-2* LM-3* LM-4* LM-5*
Continuous LED LMF-1* LMF-2* LMF-3* LMF-4* LMF-5*
Flashing LED LMD-1* LMD-2* LMD-3* LMD-4* LMD-5*
LMFD-1* LMFD-2* LMFD-3* LMFD-4* LMFD-5*
*Specify Voltage: 12V AC/DC, 24V AC/DC, 110VAC & 230VAC
Synchronised flashing rate: 70FPM.
All units supplied with adjustable pole and angled bracket and Lamps/LED
Accessories & Spares
Code Description
LM-PS Vertical Pole Stand
LM-LED*-* Spare LED Lamp for Tower Light (BA15D)
*Add colour: R, G, Y, B, W
Standard
supply *Add voltage: 12V AC/DC, 24V AC/DC, 110VAC, 230VAC.
893 01 LM-LED ACL61-* Spare Filament lamp 7W BA 15d
LM-LED LM-** *Add voltage to code 12V, 24V, 110V & 230V
Extra LM-PS Spare lens
347 MD1006VDC **Specify colour: Red, Yellow, Green, Blue, White
VISUAL ALARMS
Beacon Type 210 Accessories
Size 82mm x 57mmØ IP65
Colour Beacon Voltage Code
No Lamp
12V, 7W ACL61 12V
● Red 21010000 24V, 7W ACL61 24V
● Green 21020000 115V, 7W ACL61 110/130V
● Yellow 21030000 230V, 7W ACL61 230/240V
21040000
Clear 21050000 • Bulb BA15d
● Blue
• Total length max. 52mm
LED Bulb BA15d (for Beacon 210) long life 100 000hrs. Size: Ø33mm (length with BA15d end 52mm)
Code Code Nominal Voltage Colour Code for Lens
Continuous Light Flashing Light Add colour code C:
1 = ● Orange/Amber
LM-LED*-12V 893 01C 12V 12VAC/DC 2 = ● Red
LM-LED*-24V 893 01C 24V 24VAC/DC
LM-LED*-110V 893 01C 110VAC 110/120VAC 4 = o Clear
LM-LED*-230V 893 01C 230VAC 230/240VAC
5 = ● Blue
*Add colour to code: R, GN, Y, W, BL 6 = ● Green
7 = ● Yellow
Flashing Beacons IP65 - Size 130mm x 95Ø
Code Description FPM Colour
KF-A* Xenon Flasher 110 ● Amber
● Blue
KF-B* Xenon Flasher 110 ● Green
● Red
KF-G* Xenon Flasher 110
● Amber
AUDIO & VISUAL ALARMS KF-R* Xenon Flasher 110 ● Red
*Add Voltage to Code: 24V (12/24VAC/DC) 230VAC (110/220VAC)
KFL-A* LED Flasher 110
KFL-R* LED Flasher 110
*Add Voltage to Code: 12V (12VAC/DC), 24V (24VAC/DC), 230VAC (110/220VAC)
Rotating Blinking LED Beacon (100 000 hours) 6VDC
Code – Battery Operated IP Rating FPM Colour
LWC-001-SR IP54 Adjustable ● Red
LWC-001-SA IP54 Adjustable ● Amber
LWC-001-SB IP54 Adjustable ● Bue
LWC-001-SG IP54 Adjustable ● Green
Battery Operated Models
• Accepts 4 x 1.5V AA batteries (not supplied) • 2 x mounting magnets • Size 110mm x 125Ø • On/Off switch
• 3.5mm Barrel Plug Socket to accept 6VDC external supply. Code: MD1006VDC (to be ordered separately)
ALL
VISUAL ALARMS
Vehicle Strobe Flasher (Xenon tube) IP65
±3000 Hours operation (for airport and vehicle use). 115mm(H) x 110mm Ø
Colour Volts Power Flash FPM Code
Amber 10-33VDC 15W 125 ● RB2XDV/15-A
Amber 12/24VAC/DC 5W 75 ● RB4XDV/5-A
Amber 10-100VDC 5W 75 ● RB4XMV/5-A
Red 12/24VAC/DC 5W 75 ● RB4XDV/5-R
Green 12/24VAC/DC 5W 75 ● RB4XDV/5-G
Blue 12/24VAC/DC 5W 75 ● RB4XDV/5-B
FX9 Amber 10-30VDC 2W 75 ● RB4XDV/2-A
Sentry Red 10-30VDC 2W 75 ● RB4XDV/2-R
Amber 10-100VDC 2W 75 ● RB4XMV/2P-A
Red 10-100VDC 2W 75 ● RB4XMV/2P-R
RB4XDV-*LENS
Magnetic kit Spare Lens. * ● A (Amber), ● R (Red), ● G (Green), ● B (Blue)
FX6
Spare P.C. Board 12/24VAC/DC RB4XDV-PCB
FX7
12/24VDC Magnetic kit for above FX6
AP-3107 Single bolt kit M12 FX7
Protector guard 150 Ø x 130 H FX9
Sentry Warning Lamp (complete with battery)
Amber 24VDC 2W 3H Bat. life RB412/2
1W (long life) 10H Bat. life RB412/1L
Amber 24VDC RB4-CHR
230V Mains charger
Magnetic Strobe Flasher Beacon. 105mm(H) x lensØ 100mm, Base Ø115mm
Colour Power Flash FPM Code
Amber 15W 75 ● TK-88HP/A-*
Red 15W 75 ● TK-88HP/R-*
Clear 15W 75 TK-88HP/C-*
†Blue 15W 75 ● TK-88HP/B-*
230V *Specify voltage: 12VDC, 24VDC, 230VAC †Available to Police Services only
Rotating Beacon 110 FPM IP53
Description Colour Code
12VDC-45W Incandescent lamp Red ● 150/NR*
150/NG*
24VDC-45W Incandescent lamp Green ● 150/NY*
150/NA*
115VAC or 230VAC: 40W Yellow ● 150/NB*
Incandescent lamp Amber ●
Dimensions: 150mm Ø x 200mm H Blue ● 150/BELT
150/N*-LENS
*Specify voltage: 12VDC, 24VAC/DC, 115VAC or 230VAC
Spare Belt
Spare Lens: *R, G, Y, A, B
Spare Lamps: ACL51 230V, ACL41 24V, ACL41 12V, ACL51 110VAC
Strobe Beacon 80 FPM (15W, 800mA) IP53 - 800 hours continuous operation
Xenon Strobe Beacon Red ● JBS-100R*
Dimensions: Green ● JBS-100G*
100mm(Ø) x 80mm(h) Yellow ● JBS-100Y*
Spare Lens *R, G, Y, B Blue ● JBS-100B*
JBS-100*LENS
AUDIO & VISUAL ALARMS
* Specify Voltage: 12VDC (6-12VAC/DC), 24VAC/DC, 115VAC and 230VAC
Strobe Beacon 90 FPM (3W, 150mA) IP53
Dimensions: Red ● TK-30/R-*
77mm Ø x 50mm Amber ● TK-30/A-*
Clear TK-30/C-*
TK-30/B-*
Blue ●
*Specify Voltage: 12VDC (6-12VDC), 24VDC. Power consumption 150mA
Strobe Flashers For Fork Lifts IP65
AP-1070 Code Volts Size (mm) Colour
12-80VDC Base 130Ø x 95(H) 75 ● Amber
AP-1070A 12-80VDC Base 130Ø x 95(H) 75 ● Red
AP-1070R 12-80VDC Base 105Ø x 120(H) 75 ● Amber
AP-3107A 12-80VDC Base 105Ø x 120(H) 75 ● Red
AP-3107R
ALL 348
LED BEACONS
Beacons Type Q • Comprehensive range of cubic designed beacons with LED
IP66 • LED Steady / Flashing in sizes 1,2 & 3 LED Multi-strobe in sizes 3.
• Multi Strobe patterns (Double, 6 times, multi). Strobe patterns are externally selectable.
Q Beacons
joined
using AMK kit
Code QDS-*-** QDM-*-** QDL-*-** QBL-*-**
Function LED Steady On LED Steady On LED Steady On LED Multi-Strobe
Flash Frequency / Flashing / Flashing Selectable
Candela / Flashing 1Hz 1Hz
** Supply Voltage 120cd 170cd 1.4Hz/ 6x1Hz/Multi
1Hz 250cd
Size (mm) 24 (24-48VAC/DC) 24 (24-48VAC/DC)
100cd 240 (110-240VAC/DC) 240 (110-240VAC/DC) 24 (24-48VAC/DC)
24 (24VAC/DC) 240 (110-240VAC/DC)
48 (48VAC/DC) Size 2 132 x 132 x 137 Size 3 184 x 184 x 176
110 (110-120VAC) Size 3 184 x 184 x 176
230 (230-240VAC)
Size 1 94 x 94 x 97
*Add Lens colour to code: ● A (Amber),● R (Red), ❍ C (Clear), ● B (Blue), ● G (Green), ● Y (Yellow)
Accessories
Code Description
AMK Mounting Kit for combining type Q Beacons
AG* Flat Gasket for mounting type Q Beacons
AB* Metal Mounting bracket for type Q Beacons
AB* AMK AG*
*Add size to Code: 1,2,3
Beacons Type N • 90Ø x 102 H mm compact design • Hi-performance units for signalling in daylight
IP65 • Wide voltage range due to switch mode power supply • Shock and vibration resistant, maintenance free
• NMS - 3 colours in one beacon • NFS-HP - 3 LED strobe patterns selectable by DIP switches
(Double, 6 times,multi-strobe)
Note:
NMS, NMS-HP -
3 colours in 1
Code NES-*-** NFS-*-** NFS-HP*-** NMS-C-** NMS-HP-C-**
LED Multi-Colour, Switch
Description LED Steady on / Flashing LED Strobe LED Strobe LED Selectable, Steady On
Flash Freq 2Hz Double Strobe Double / 6 Times / Multi Steady / Flashing 1Hz
** Supply Voltage 12 (12-24VAC/DC) 1.4Hz 1.4Hz/ 6 x 1Hz / Multi
24 (24-48VAC/DC) 1Hz 24 (24-48VAC/DC)
240 (110-240VAC) 24 (24-48VAC/DC) 24 (24-48VAC/DC) 24 (24VAC/DC) 240 (110-240VAC/DC)
110 (110-120VAC) 240 (110-240VAC/DC) 48 (48VAC/DC)
230 (230-240VAC) 110 (110-120VAC)
230 (230-240VAC)
*Add Lens colour to code: ● A (Amber), ● R (Red), ❍ C (Clear), ● B (Blue), ● G (Green), ● Y (Yellow)
Accessories
Code Description
WMS MGS WMS Metal bracket for wall mounting
AUDIO & VISUAL ALARMS MGS Magnetic mounting
LED 22mm PANEL MOUNT INDICATORS & ALARMS IP65
Steady/Flashing Beacon or Steady/Flashing Size Codes
Beacon Supply Volts
Beacon & Buzzer Combo
Beacon: 85 -103dB Buzzer & Beacon Combo
Buzzer: 45mm - 2 Tones Steady / Flashing Steady / Flashing
Buzzer: 65mm - 3 Tones
30mm 80050C405-* – 24VAC/DC
80050C313-* – 230VAC
45mm 80150C405-* 81351C405-* 24VAC/DC
80150C313-* 81351C313-* 230VAC
65mm 80250C405-* 81451C405-* 24VAC/DC
80250C313-* 81451C313-* 230VAC
80010C405-R 80110C405-C 80210C405-R * Add colour to code:● A (Amber), ● R (Red), C (Clear), ● BL (Blue), ● GN (Green), ● Y (Yellow)
349 FALLPL
LED BEACONS
LED Type (Flasher, Long Life) Beacon Light - 125mm(H) x 75mmØ
Beacon Flasher IP54 Hilo Flasher IP65
Colour 12-24VAC/DC 110-230VAC 12-24VAC/DC 110-230VAC
Red ● LIB011F LIB001F LIH021F LIH011F
Green ● LIB012F LIB002F LIH022F LIH012F
Amber ● LIB013F LIB003F LIH023F LIH013F
• For E27 screw type add ES at end of code e.g. LIB011F-ES
LED Steady (Non flashing, Long Life) Beacons - 143(H) x 70mmØ
Beacon Type ES Type Hilo Type Red ● LIB011 LIB001 LIH021 LIH011
Switch Green ● LIB012 LIB002 LIH022 LIH012
20mm conduit nipple Amber ● LIB013 LIB003 LIH023 LIH013
Combination LED Flasher or Rotating Beacon - 143(H) x 70mmØ
Rotating / Flasher Code - Selection by switch Steady on only Code
230VAC 230VAC
Combination LED E27-FF120LED-* 120 High Bright LED's E27-D150LED-* 150 High Bright LEDs
Rotating/ Flasher
*Add colour to code, ● CW (Cool White), ● R (Red), ● GN (Green), ● BL (Blue), ● Y (Yellow)
Flashing LED Beacons 110 FPM IP53
Description Colour LED Beacon
Dimensions Red ● 113/LEDR*
112mmØ x 143mm(h) Green ● 113/LEDG*
Yellow ● 113/LEDY*
* Specify Voltage: 24V(12- Amber ● 113/LEDA*
24VAC/DC), 230V(48-230VAC/DC)
Spare Lens *R, G, Y, A 113/FH*LENS
*Specify Voltage: 24V (12-24VAC/DC) or 230VAC (48 - 230VAC/DC)
LED Strobe Lights IP65 Size Ø100mm x (H)80mm
Code Volts Colour
6-14VDC ● Red
SL-1301-R 9-14VDC ● Amber
SL-1301-A 9-14VDC ❍ Clear
SL-1301-C
Features • Operating life: over 50 000Hrs
• 6 Different flash patterns
Specifications • Electrical protection: Reverse polarity protection
• Current drain: 60~200mA@12VDC • Backup battery life: Steady ON Up to 2 hours
• Adjustable flashing speed: 30~260 flashes/minute
Strobe/Flashing Up to 4 hours
Flashing LED Vehicle Beacon IP67
Code Type Supply Voltage Size
Wiring LB-130-* Base Mount 9 - 33VDC 167Ø x 89mm
LB-130M-* Magnetic 9 - 33VDC 167Ø x 89mm
*Add colour to code, ● W (White), ● R (Red), ● GR (Green), ● B (Blue), ● A (Amber) AUDIO & VISUAL ALARMS
• 8 Selectable flashing patterns
• Multiple beacons can be connected for synchronous or alternating flashing
• UV Resistant lens & die-cast aluminium base
Flashing LED Vehicle Beacon IP67
Code Type Supply Voltage Size
CS-155-I-* High 9 - 33VDC 182Ø x 182mm
CS-155-II-* Low 9 - 33VDC 182Ø x 104mm
Wiring *Add colour to code, ● W (White), ● R (Red), ● GR (Green), ● B (Blue), ● A (Amber)
CS-155-II • 8 Selectable flashing patterns including revolving
• Multiple beacons can be connected for synchronous or alternating flashing
• UV Resistant lens & polycarbonate lens & base
CS-155-I
ALL 350
LED BEACONS
Rearguard Xenon IP65
Code Volts Current Colour Drilling for Panel Mounting
(ISO 4148)
PL-8803-A 12 -110V 300 - 35mA ● Amber
PL-8803-B 12 -110V 300 - 35mA ● Blue 3 holes 7mm dia. 120˚
PL-8803-W 12 -110V 300 - 35mA ● White 148 mm dia
PL-8803-R 12 -110V 300 - 35mA ● Red
PL-8803-G 12 -110V 300 - 35mA ● Green 120˚
• ±60 Flashes per minute • 2 Joule
• Size Ø148 x 63mm Cable entry
• Base Mounting
Rearguard LED IP65 63mm
148mm
Code Volts Current Colour
PL-9803-A 12 - 80VDC 140 - 45mA ● Amber
PL-9803-B 12 - 80VDC 141 - 45mA ● Blue
PL-9803-W 12 - 80VDC 142 - 45mA ● White
PL-9803-R 12 - 80VDC 143 - 45mA ● Red
• 80 Quad flahes per minute • Base Mounting
• Bright Directional Warning • Size Ø148 x 63mm
Applications - Suitable for many vehicle applications including utility,
refuse trucks, street cleaners, delivery, recovery and large vehicles.
LP Series LED Beacons IP67 - Size 44H x 76Ømm
Code Volts Power Colour
RB447002 85 - 265VAC 15mA@110VAC, 10mA@230VAC ● Amber
RB447003 85 - 265VAC 15mA@110VAC, 10mA@230VAC ● Red
RB445002 10 - 100VDC 110mA@12VDC, 55mA@24VDC ● Amber
RB445003 10 - 100VDC 110mA@12VDC, 55mA@24VDC ● Red
• Clear lens with coloured LEDs
• 65 Flashes/Min, 6 Bursts/Flash
LT Series LED Beacons IP67 - Size 95H x 76Ømm
Code Volts Power Colour
RB448002 85 - 265VAC 15mA@110VAC, 10mA@230VAC ● Amber
RB448003 85 - 265VAC 15mA@110VAC, 10mA@230VAC ● Red
RB446002 10 - 100VDC 110mA@12VDC, 55mA@24VDC ● Amber
RB446003 10 - 100VDC 110mA@12VDC, 55mA@24VDC ● Red
• Clear lens with coloured LEDs
• 65 Flashes/Min, 6 Bursts/Flash
LT2 Series LED Beacons IP67 - Size 95H x 76Ømm
Code Volts Power Colour
RB448021 ● Red (flashing) or ● Green (steady on)
RB446021 85 - 265VAC 15mA@110VAC, 10mA@230VAC ● Red (flashing) or ● Green (steady on)
10 - 100VDC 110mA@12VDC, 55mA@24VDC
AUDIO & VISUAL ALARMS Features
A compact dual function LED beacon - green continuous and red flashing
• Ideal for indicating process/system status - green continuous light for normal operation, red flashing to
indicate status change
• Clear lens with coloured LEDs
Accessories - for LP, LT & LT2 series beacon
Code Description
FX39 Mounting pole only
FX40 Mounting bracket
FX38 FX40 FX2 Mounting base
351 Shown with beacons FX2
mounted
FALLPL
LED EMERGENCY FLASHING BEACONS IP67
Code 12-55C2*-** 12-60C2*-** 12-709C3* 12-30C2A-M22 12-30C2A-ST
Voltage 10 - 30VDC 10 - 80VDC 10 - 80VDC
LED Qty 10 - 30VDC 10 - 30VDC 36 x 0.5W SMD LED 24 x 0.2W SMD LED
Flash Pattern Single / Rotate 24 x 0.2W SMD LED
Flash per min 20 x 0.2W SMD LED 24 x 0.2W SMD LED 120 - 150 / 120 - 180 Single Single
Mounting Pipe / Pole On: 1.3s / Off: 0.27s
Size Single / Double / Triple / Quadruple / Rotate Ø145 x 179mm On: 1.3s / Off: 0.27s
Colour White/Amber/Red M22 Thread Base Mount
150 / 74 / 76 / 75 / 143 Respectively Ø72.5 x 111.5mm
Ø72.5 x 132mm
Base / Magnetic Base / Magnetic Amber Amber
Ø130 x 60mm Ø130 x 96mm
White/Amber White/Amber
*Add LED colour to code: W (White); A (Amber), R (Red). **Add mount type to code: ST (Base Mount) 3 x screws, MG (Magnetic) up to 80kph
LED STROBE BEACONS IP56
Code 1P2L-5-955C728*-** 1P2L--6905C728*M-*-* 1P2L--790597C83S*-* 12-P3L0-C928A02-M-*22 1P2L-3-09C8022AR-S-*T
12 - 80VDC 12 - 80VDC
Voltage 12 - 80VDC 12 - 80VDC 12 - 80VDC
LED Qty 15x0.5W LED
Flash Pattern Base
Mounting Ø148 x 123mm Strobe 80 quad flash groups per min Revolving
Size White/Amber/Red/Blue
Colour Magnetic Centre Stud Magnetic
Ø148 x 123mm Ø145 x 150mm 204 x 145 x 150mm 204 x 145 x 150mm
White/Amber/Red/Blue White/Amber/Red/Blue Amber/Red/Blue Amber/Red/Blue
*Add colour to code: W (White); A (Amber), R (Red), B (Blue).
LED BEACONS
SecuriLED IP67 Code Volts Colour Power
Code Stud
Surface PL-9805T-A 12VDC 24VDC
PL-9805-A PL-9805T-R
PL-9805-R PL-9805T-B 12-24VDC ● Amber 1A 0.5Amp
PL-9805-B PL-9805T-W 12-24VDC ● Red
PL-9805-W 12-24VDC ● Blue 1A 0.5Amp
Features 12-24VDC ● White
1A 0.5Amp
1A 0.5Amp
• Surface Mount Size 143 x 110 x 46mm • Stud Mount Size: 125 x 97 x 62mm AUDIO & VISUAL ALARMS
• 3W x 6 Pcs per fitting • 120 Quad flashes / min
SignalLED IP67 - Surface mount. Size: 91(L) x 32(H) x 22(D)mm. Multiflash
Code Volts Power Colour
9 - 30VDC 3W/180mA ● Amber
DAD1001 9 - 30VDC 3W/180mA ● Red
DAD1002 9 - 30VDC 3W/180mA ● Blue
DAD1003 9 - 30VDC 3W/180mA ● Clear (White)
DAD1004
Features • Up to 10 units can be wired for synchronous
• A compact lower consumption maintenance-free LED • Robust die-cast aluminium housing
beacon providing wide-angle light dispersion
• 22 Operating Modules or asynchronous operation
• 3 wide angled LED optics
ALL 352
COMMUNICATION EQUIPMENT
Robust Telephones Explosion Proof ABS Weatherproof IP54
Ex d I/II B + H T6/
2
Ex m e [ia]I/II C T6
I430-ICE I448
Zenith Ratel Phoenix Code I430-ICE
Code Z500 A120 A130 Size: 310 x 220 x 130.
Single Telephone Cable Pair, 2-80 telephone.
Rating IP65 Weatherproof Double Protection Line Voltage: 48VDC. Distance: 10-12km.
Size (HxWxD) Max 80 phones per power supply.
Housing 260 x 120 x 100mm 230 x 140 x 110mm 280 x 15 x 140mm
Weight Gun Metal Brass Code I448
ABS M/Steel Powder Coated
1Kg 2.5Kg 9Kg 110/230-48VDC
Power supply to be ordered separately with
Automatic analogue industrial/mining telephone compatible with all 24V/48V 48hr battery back up included
PABX systems, pulse/tone switchable. Ring signal 45V-90VAC 17Hz-50Hz
Telephone Booths Telephone Extension Light/Siren
Phone Ringer. For standard 2 wire analogue phones only.
SSLU
Code Acoustic Non Acoustic Weatherproof IP65 Light & Siren Unit
TB100 340 x 140 x 120
Size (HxWxD) ATB100
Housing 670 x 450 x 500mm ABS
Weight 670 x 500 x 450mm Polypropylene 3Kg
Fibreglass 5Kg
7.5Kg • O perates in sympathy with the
telephone ring signal.
• Powered by 110 or 220VAC
• Siren 116db o/p.
• L ight 8 x super bright LED.
PAGE TELEPHONES
Page Telephones
Code P300 P300NHT
Handset No Yes
Weatherproof IP65 Weatherproof IP65
Rating 310 x 140 x 120mm
Size (HxWxD) 310 x 140 x 120mm
Housing ABS
ABS 3.5kg
Weight 3kg
P300NHT • 2-50 telephones connect in parallel with twisted telephone cable pair
• Operates on 230VAC/ 110VAC
P300
• Central 12V PSU option available
• Simplex, open voice comms at 2 watt output
EX HOWL CALL TELEPHONE BOOTHS FLAMEPROOF & MINING
Ex Howl Telephones - without power supply.
Sound-powered telephone systems for use in rough conditions, including areas
with explosive atmospheres and fire-damp.
Code Description
5069 Howl-Call Telephone without snap-in plug
Application - If you want or need to telephone in areas where this is normally not possible, you need a sound-powered telephone
system. Operation without external power supply and complex equipment, sound-powered telephones are ideal for communications
whenever there is no power supply available, e.g. at blast furnaces, in tunnelling or mining, or offshore on oil rigs or high-sea steam-
ers, and provide a direct connection to the switchboard, base, bridge or colleagues on the surface or wherever. This surprisingly
easy, but effective method is already used widely to call for material, report faults or save lives.
FLP 392
TWO WAY RADIO PMR 446
General Semi-Professional Professional
Blister Kit Includes
Kit Includes FUNCCTIAVILOBLNRA Kit Includes WAPTREORO- F
• 2 x Radios • 2 x Radio FUNCCTIAVILOBLNRA • 1 x Radio
• 2 x Wall chargers • 2 x 800mA Batteries • 1 x Desktop charger
• 6 x AAA rechargeable batteries • 2 x Belt clip • 1 x Rechargeable battery
• 2 x Belt clips • 1 x Dual desktop • 1 x Belt clip
charger
CuasnedbBMeAaOsBNaYITOR
Code G5 XT (Kit) G7 XT (Kit) G9 PACIFIC IPX5
Channels 8 + 16 pre-programmed 8 PMR446, LPD69 8 PMR446, LPD69 57 International
156 to 162MHz
PMR446 Dual Band Dual Band 38 CTCSS, 104 DCS
38 CTCSS, 104 DCS Battery pack 800mAh
CTCSS & DCS Tones 38 CTCSS 38 CTCSS Battery pack 800mAh
Operate with 3 rechargeable batteries 800mAh Battery pack 800mAh
AAA Ni-MH
Autonomy 5/5/90 Up to 35hrs Up to 18hrs Up to 12hrs Up to 12hrs
Backlit multifunction LCD Backlit multifunction LCD
Display Backlit mutli-function LCD Backlit multi-function LCD PMR446 High (~500mW)
5 Watt (1W/5W)
Transmission Power PMR446 500mW ERP PMR446 High (~500mW) 58 x 110 x 32mm 62 x 122 x 35mm
-20˚ to +55˚C
Dimensions (WxHxD)r 50 x 85 x 25mm 58 x 122 x 34mm -15˚ to +55˚C
114g (without batteries) 137g
Working Temp -20˚ to +55˚C -20˚ to +55˚C
Weight 74g 123g
Features Scan, Vox, Keypad lock, Roger Beep, Battery Indicator.
Accessories
Code R72701 R72005 MA28-L AE38
Description Belt Clip Belt Clip Microphone with Earphone Throat Microphone PTT or finger PTT
Model G7, G9 & Pacific
G5 All All
TEST INSTRUMENTS, TOOLS & GENSETS Code MW904 ALG7 PB-ATL/G7 C785
Description Wall Charger Car Charger Rechargeable Pack Desktop Charger
Model G7, G9 & Pacific G7, G9 & Pacific
All G7
393
SOLAR MODULE ANALYSER
Solar Module Analyser PROVA200 PROVA300XP
Code Analyser
Description Printer
• Voltage range: 0-60VDC • Maximum current (Imaxp) at Pmax
• Current range: 0-6A • Voltage at open circuit (Vopen)
• I-V Curve test for solar cell • Current at short circuit
• Maximum solar power (Pmax) search by • Calculation of efficiency (%)
• Manual single point test
Auto-scan (60V, 6A)
• Maximum voltage (Vmaxp) at Pmax
MET
DIGITAL/ANALOG INSULATION TESTERS
Circuit Analyser Digital Insulation Tester Analogue/Digital Hand Crank Analog Earth
Insulation Tester Insulation Tester Resistance Tester
MS5908C IT811A EM580F 2732IN 2751IN NB311110 ST-1505
Analog Digital
• Auto zero adjustment • Test Ranges: • Test Voltage: 500V • E arth resistance
• True RMS • Auto discharge 125V: 2/20/200MΩ • Test Ranges: • Insulation Resistance: 10-100-1000Ω
• Data hold 250V: 20/200/500MΩ • OHM Meter:
• Ground to Neutral Voltage • Backlit LCD display 500V: 20/200/1000MΩ 250V: 250/500/1000V • E arth voltage:
• Range: 0 - 20GΩ • Lock function to lock 0Ω to 500MΩ 0-30VAC
• Peak Voltage • Test Voltage: test button 10MΩ 20/200/2000MΩ
• Data Hold 500V: (Auto Ranging) • 8 20Hz ± 2mA
• Frequency 250/500/1000/2500V • Overload protection • Timer function
• AC Voltage: 200MΩ • 6 x 1.5V batteries
• 5A/8A/10A load for volt 0-750V ±2% 1000V: (excl.)
• Batteries Included • S upplied with test
drop test 400MΩ
leads
• Socket test function
• RCD / GFCI test
Line Volts: 85 - 265V • AC Volts: 500V
• Continuity Test
Neutral/Ground: 0 - 10V •Timer 3 - 5mm (2751)
•Twist lock test button
Peak: 121 - 374V (2732)
• Manual zero OHM
Freq: 45 - 65Hz adjustment
• Auto Discharge
Volt Drop: 0.1 - 99.9% • Data Hold (2751)
RCD trip time: 1ms - 6.5s
RCD trip Amp 30mA
GFCI trip time: 1ms - 6.5s
GFCI trip Amp: 6mA
RCD Tester Earth Leakage Testers Loop/PSC/Earth H.V. Insulation
TEL1-3 (230V) MINITRIP 1 MINITRIP 2 2820EL 2726NA 2803IN 2804IN
TEL1-4 (240V) max 5kV max 10kV
• Wiring check • Analogue • Digital • Digital
• Verifies that the wiring • 5 -55mA Stepped out- • 10-50mA variable • Sensitivity test: • One push button • Test Ranges: TEST INSTRUMENTS, TOOLS & GENSETS
is correct (Neon light smart control 0,5/1/2,5/5kV 1/2,5/5/10kV
indication) put. Earth c urrent test earth current 5-999mA • Built-in wiring
• RCD testing with rated at 230VAC • Wiring check (@ 317VL-E) checker 25/50/125/ 50/125/250/
variable fault current • 5 0/60Hz • 5 0/60Hz • T ime delay test: • Line impedance 250GΩ 500GΩ
• Trip settings • R otary switch • Potentiometer 0.000-99.999S • Neutral impedance
10 - 35mA selection • Sensitivity accuracy: • Earth impedance • Resistance measure is
• P ush button injection selection ± 1mA • Voltage L-N auto ranging on all
• 230VAC ±15% • Time delay accuracy: • Voltage L-E test voltages
± 2ms • PSC L-N • Digital display
MINITRIP 1/L UNI-TRIP 50/150 • Multi-Voltage 100- • PSC L-E • Timer
450VAC • S croll through • Bargraph
• 50Hz only • Auto-hold – Auto-off
• Auto-off results • Auto-discharge
• Auto Ranging • 50Hz 230V ± 20% • Non isolated circuit
• Phase Angle selectable: • Auto-ranging sensing (Audible &
0°/180° • Auto-off Visual Aarm)
• Impact resistant casing • c /w carrying case
suitable for heavy
As MINITRIP 1 with 15A plug 50 or 150mA range 3 phase industrial use
and lead. 150mA also available Earth Leakage Tester
MET 394
DIGITAL MULTIMETERS
Model MS320 MAS830 MS8321D MS8233E MY60
Description
• LCD display • LCD display • Large LCD display • Back lit LCD display • Large LCD display
• Pocket size • Pocket size • Data hold • Auto ranging • Data hold
• Auto ranging • Data hold • Transistor tester • Non contact voltage • Transistor tester
• Data hold • Auto power off
• Auto power Off detector • Low batt. indication
• Max data hold • °C / °F
• °C / °F
(-20℃ - 1000℃)
(-20℃ - 1000℃)
200mV - 750V
AC Voltage 4V - 600V 200V & 600V 2V - 600V 2V - 600V
DC Voltage 400mV - 600V 200mV - 600V 200mV - 600V 200mV - 600V 200mV - 1000V
Diode Test Yes Yes Yes Yes
AC Current 40mA - 400mA ― 2mA - 20A 200µA - 10A Yes
DC Current 40mA - 400mA 200µA - 20A 200µA - 20A 200µA - 10A
Resistance 400Ω - 40MΩ 200Ω - 20MΩ 200Ω - 20MΩ 200Ω - 20MΩ 20µA - 10A
Capacitance 4nF - 100µF ― ― ―
Frequency 0 - 100KHz ― ― ― 20µA - 10A
Continuity Test Yes Yes Yes Yes
200Ω - 20MΩ
TrRueMS TrRueMS TrRueMS 2nF - 100µF
―
Yes
TEST INSTRUMENTS, TOOLS & GENSETS Code MS8264 MS8250A MS5208 MS8340B MS8228
Description • Backlit LCD display • Backlit LCD display
• Backlit LCD display • Backlit LCD display • Backlit LCD display • Bargraph display • Auto ranging
AC Voltage • Data hold • Non contact voltage • Data logging • Peak measurement • Relative humidity
DC Voltage • Transistor tester detector • Auto / Manual ranging • Auto ranging • Infrared thermometer
Diode Test • Inductance: 20mH - 20H • Auto ranging • Low Pass Filter (1KHz) • Max/Min data hold • Transistor tester
AC Current • Data hold for AC • Auto power off • Data hold
DC Current • Auto power off • Max/Min/AVG data hold • Low battery indication • °C / °F
Resistance • Low battery indication • Auto power off • USB interface
Capacitance • Relative measurement • Low battery indication (Windows OS) 40mV - 750V
Frequency • DAR / PI Insulation mode • Relative measurement 40mV - 1000V
Temperature 2V - 750V 400mV - 600V • °C / °F Yes
Continuity Test 200mV - 1000V 400mV - 600V 600mV - 750V 400µA - 10A
Yes Yes 220mV - 700V 400µA - 10A
395 20mA - 10A 400µA - 10A 600mV - 1000V 220mV - 1000V 400Ω - 40MΩ
2mA - 10A 400µA - 10A Yes 50nF - 200µF
200Ω - 200MΩ 400Ω - 40MΩ Yes 220µA - 10A 10Hz-100KHz
2nF - 200µF 50nF - 100µF 220µA - 10A 0 - 40°C / -20 - 300℃ (IR)
0 - 20KHz 0 - 5MHz 600mA - 400mA 220Ω - 220MΩ Yes
-20°C - 1000°C - 22nF - 220mF
Yes Yes 60mA - 400mA 0 - 220MHz
-10°C - 700°C
600Ω - 60MΩ Yes
6nF - 60µF
9.999MHz
-30°C - 1300°C
Yes
MET
DIGITAL CLAMP METERS
TrRueMS TrRueMS TrRueMS
Model M266 MS2000G MS2102 MS2026R MS2108
Description
• LCD display • Backlit LCD display • Large backlit LCD • Backlit LCD display • Backlit LCD display
• Data hold • Data hold display • Data hold • Data hold
• Jaw Size: 50mm • Jaw Size: 55mm • Auto ranging • Auto ranging
• Bargraph display • Auto power off • Low battery display
• Data hold • Low battery display • Work light (torch)
• Jaw Size: 55mm • Work light (torch) • 100msec inrush current
• Jaw Size: 40mm
limiter
• Jaw Size: 26mm
AC Voltage 750V 200V & 750V 400V & 600V 6V - 600V 660mV - 600V
DC Voltage 660mV - 600V
Diode Test 1000V 2V - 1000V 400V & 600V 600mV - 600V Yes
AC Current 66A & 600A
DC Current Yes Yes Yes Yes 66A & 600A
Resistance 600Ω - 66MΩ
Capacitance 20A & 1000A 200A & 2000A 40A & 400A 6A - 1000A 6.6µF - 66mF
Frequency ― ― ― 0 - 1KHz
Temperature 200Ω & 20KΩ 200Ω - 2MΩ 40A & 400A 600Ω - 60MΩ -40°C - 750°C
Continuity Test ― ― 4nF - 4000µF Yes
― 0 - 2KHz 2000Ω
― ― 0 - 10MHz
Yes -20°C - 750°C ― ―
― Yes
Digital Clamp Meters Yes Yes
TrRueMS High Sensitivity Clamp Meter Fork Meter 3 Ph Power Clamp Meter 1 Ph Power Clamp Meter
APNOAWLYESRERS
Code MS2015C MS2006B MS2600 MS2205 MS2208
• Large LCD display
Description • Backlit LCD dual display • Data hold • Large backlit LCD display • Large backlit LCD display • Large backlit LCD display
• Max/Min data hold • Low battery display • Auto ranging • True RMS • True RMS
• Auto power off • Jaw Size: 31mm • Max/Min data hold • Auto ranging • Auto ranging TEST INSTRUMENTS, TOOLS & GENSETS
• Jaw Size: 40mm • Auto power off • Data hold • Max/Min data hold
• Auto / Manual ranging ― • Low battery display • Data logging • Auto power off
• Bargraph display ― • Relative Measurement • RS232 interface • Work light (torch)
• Non contact voltage detector Yes • Jaw Size: 12mm (Windows OS) • Jaw Size: 26mm
• Relative measurement 2mA - 60A • Jaw Size: 50mm
• Work light (Torch) ―
• Low battery display ―
―
AC Voltage 600mV - 750V ― 4V - 600V Volts: 0.1V - 600VAC Volts: 0.1V - 600VAC
DC Voltage Yes 4V - 600V
Diode Test 660mV - 1000V ― Yes Amps: 0.01A - 1000AAC Amps: 2mA - 3999mA / 4A - 200A
AC Current 0 - 200A
DC Current Yes ― Power Power
Resistance 400Ω - 40MΩ
Capacitance 66A - 1000A 40nF - 40µF Active: 0.01kW - 600kW Active: 0.1kW - 120kW
Frequency ― 0 - 100kHz
Continuity Test 660Ω - 66MΩ Yes Apparent: 0.001kVA - 600kVA Apparent: 0.01kVA - 120kVA
Temperature 6.6nF - 66mF ―
Reactive: 0.001kVAr - 600kVAr Reactive: 0.01kVAr - 120kVAr
0 - 10KHz MET
Harmonics: 45Hz - 65Hz Harmonics: 30Hz - 1KHz
Yes
˗20°C - 1000°C 1, 2-6, 7-8, 9-10, 11-15, 16-21 1, 2-6, 7-8, 9-10, 11-15, 16-21
PF 0.3 - 2 PF 0.3 - 1
396
DATALOGGING EQUIPMENT
Multimeter True RMS & Data Logger AC/DC Power Clamp Meter PC Adaptor & Software
PROVA 803 PROVA 901 TES-3063 TES-3064 (PC adaptor)
• To down load the data into the
• D ual Input Channels • Dual Input Channels • 1600 Point Data logging function c omputer from datalogging memory
• True Power/Apparent Power/Power of TES-3063
• D ual Channels Measurement sim- • C ompare Voltage at two different • C ommunicates with PC via RS-232
Factor Measurement
ilar to a Dual Channels DSO locations • True RMS. V, A, W for further data analysis and reports
• 4 digits with 2” LCD Display
(V+V/V+A) • R ead Voltage and Current at the • MIN/MAX/AVG Measurement RS232
• Amp/Voltage Frequency
• Hz+Duty Cycle Dual Display same time Measurement
• PEAK HOLD Detector
• S tandalone Data Logging of • S tandalone Data Logging of • 3 Phase adaptor for 3 phase power
10 708 Records both Channels 10 708 Records both Channels measurement
• Peak hold/Data hold
• R S-232C Interface, application • Optical Isolated RS-232C ASCII
software Interface, application software
• B andwidth 10kHz (max.) • B andwidth 200kHz
• B asic Accuracy 0.04% (DC) and • B asic Accuracy 0.02% (DC) and
0.2% (AC) 0.1% (AC)
DCV/ACV: 60.000mV-1000.0V DCV/ACV: 60.000mV-1000.0V Ranges
DCA/ACA: 600.00µA-10.000A DCA/ACA: 600.00µA-10.000A • Volt: 10V - 600VAC • Reactive: 0.01 - 120KVAr
Resistance: 999.99Ω Resistance: 999.99Ω - 40MΩ • Amp: 2mA-200A • PF (cap): 0.3 - 1
Capacitance: 60.00nF-600.0µF Capacitance: 60.00nF-600.0µF • Active power: 0.1 - 120KW • PF (ind): 0.3 - 1
• Apparent: 0.01 - 120KVA
Frequency: 1.000Hz-2MHz Frequency: 1Hz-2.000MHz
Duty-Cycle and Diode Test Duty-Cycle and Diode Test
Continuity Test Continuity Test
Temperature/Humidity & Air Sound Level Datalogger DC Current or Voltage Datalogger AC Current &
Pressure Datalogger Voltage Datalogger
ST-174B ST-173 ST-171A ST-171V ST-175CV1
TEST INSTRUMENTS, TOOLS & GENSETS • Manual & Automatic start mode • Max - Min measurement • Freely selectable measuring cycle • True RMS reading
• Alarm set-up & indication • Alarm value set-up / A&C Weighting • USB Data Download • USB-PC Interface (c/w software)
• Recording & low battery • Normal & Peak Mode • Alarm display if parameters exceeded • Single channel input
• Fast and slow response • c/w Probes for 1PH, current and
indication • Manual/Auto Mode voltage measurements
• USB port for data traffic & power
• Status indication via Red/Yellow
& Green LED
Data memory: 10 000 readings Sampling Rate: 1sec - 24hr Status display: Status display: Current: 10 - 200A
Sampling Rate: 1 min to 18 Hrs 2 LEDs 2 LEDs
Data Output: USB Accuracy: ±1.4db Current Range: DC Voltage Range: Voltage: 10 - 600VAC
Temp Range: -40 to 70°C/ 4 to 20m ADC 0 to 30VDC
Freq Range: 31.5Hz to 8kHz Accuracy: Accuracy: Sampling Rate: 1sec - 24hr
-40° to 158°F ±1%/±1Count ±0.5%+1
Resolution: 0.1°C/0.1°F Dynamic Range: 50db Memory: Memory: Reading Memory: Up to 100 000
Humidity Range: 0 to 100%RH 32000 readings 32000 readings
Resolution: 0.1%RH Level Ranges: Auto: 30db - 130db Sampling Rate: Sampling Rate:
Air Pressure: 950 to 1050hPa 1sec - 24hrs 400Hz to 24 hrs
Resolution: 0.1hPa Time Weighting: Fast(125ms),slow(1s)
397 Reading Memory:129920 points for
dBA or dBC
Data Output: USB Data
MET
TEST EQUIPMENT Temperature Meters
Infrared Thermometers
Pocket size 3-in-1
Code MS6520A MS6530A IR-88 IR-99 MS6511 ST-612
-20°C to 270°C
Range ˗20°C - 300°C ˗20°C - 850°C 1°C IR:-35°C to 260°C JK:: ˗˗220100°°CC -- 11327020°°CC -50° to 1300°C
Thermistor: -40°C to 260°C T: ˗250°C - 400°C
Clamp: -40°C to 200°C E: ˗150°C - 1000°C
Resolution ± 0.1°CF ± 0.1°C/F 0.1°C 0.1°C/F ± 0,1°C / 1°C
Basic Accuracy
Optical Resolution ± 0.1°CF ± 0.5°C/F ±2% or ±2°C ±2% of Reading 0.5°C/F ± 0,5% of reading
Emissivity
Sensor 10:1 12:1 6:1 1:1 spot size - -
Battery
Features 0,95 0,95 Fixed at 0.95% Adjustable 0,1 - 1,0 - -
― ― -- - K Type included
1 X 9V (Incl) 1 X 9V (Incl)
1.5V AAA Battery x 2 (Incl.) 3V CR2032 Lithium - 9V Battery (Incl.)
• Backlit LCD display • Backlit LCD display Laser targeting (3 in 1) IR Thermometer TC Types: K, J, T, E Large display
Data & max hold with Thermistor Probe and
• Read hold • Read hold Auto Power Off clamp. User selectable °C Max/Min/Data hold Data & max hold
User selectable °C or °F or °F. Data Hold and Auto Auto power off T1-T2 modes
• Max/Min/AVG display • Max/Min/AVG Low Battery indication Power Off. Max, Min record °C / °F Dual thermocouple
Differential display Response time: <1 sec Response time: <1 sec input. Scan function
• Low battery display • Low battery display
• Laser pointer • Laser pointer User selectable
• °C / °F • °C / °F °C or °F
Humidity & Temp Meters Moisture Meter K Type Thermocouples
Laser
& Probe
Code TH812 MS6508 EM4807 Bead Probe TPK-03 TPK-04 TEST INSTRUMENTS, TOOLS & GENSETS
Range Humidity: 0% - 100% Humidity: 0% - 100%
Temperature: 0 - 50°C Temperature: -20 - 60°C Measure moisture TPK-01 TPK-03:
Resolution level in paper/card- Immersion Probe
Humidity: 0,1%RH Humidity: 0,1%RH board, wood & Measures surface or General p urpose n eedle
Sensor Temperature: 0,1°C Temperature: 0,1°C hardened material air temperatures to type with stainless
Features (mortor/concrete/ 260°C (500°F). 1.2m sheath. Use for
Humidity: Capacitive Humidity: Capacitive plaster). Measure long wire measurements up to
Temperature: NTC Temperature: NTC ambient temperature. has an industry 800°C (1472°F)
Built in torch. standard m iniature
Wood: 6-42% connector plug. TPK-04:
Resolution: 1% Surface Probe
Dew point and Wet-bulb Dual 4 digit LCD display Building Material: Miniature, fast response
temperature calculation. Data logging up to 99 measures 0.2-2% probe, with 800°C
Max/Min Values Dew point and Wet-bulb Temperature: (1472°F) max. surface
Data Hold temperature calculation. 0-40˚C/ 32-99˚F temperature. Ideal for
Auto Power off Max/Min value measurement Battery included measuring the surface
°C or °F display switch Data hold, Auto power Off temperature of small
°C or °F Display Switch electronic parts.
MET 398
POWER QUALITY ANALYSERS Accessories
A1069 Code Description
A1122 A1069
Mini Clamp
100A/1V
(range 2A - 100A)
A1122 Mini Clamp 5A/1V
(range 2A - 100A)
Code MI-2892 MI-2592 A1039 A1039 Connection cable
Voltage: TRMS, peak, crest factor 4 Ch Cat III / 1000V 4 Ch Cat III / 1000V A1037-M for current clamp
Current: TRMS, peak, crest factor 4 Ch (Auto clamp detection) 4 Ch (Auto clamp detection) A1033-M
Power: P, Q, S A1257 A1037-M Current
Unbalance, flicker measurement ✔ ✔ A1198 transformer
Harmonic and THD measurement ✔ ✔ 5A/1V
Interharmonics ✔ ✔ S2014
Energy (P, Q, Forward/backward) ✔ ✘ A1257 A1033-M Current clamp
Events (interruptions, swells, dips) ✔ ✔ 1000A/1V
Inrush currents ✔ ✔
Waveform/Inrush ✔ ✔ A1257 3-phase flexible
Transients recording ✔ Display and Snapshot only A1198 current clamps
Power quality analysis EN 50160 ✔ ✘ 3000/300/30A/1V
Recording of adjustable alarms ✔ ✔
Temperature measurement 7 10 Magnetic contact
Power factor cos ɸ ✔ ✘ probe
PC software (Included) ✔ ✔
Standard Set PowerView 3 PowerView S2014 Safety fuse
1-phase flexible current clamps adapter, 3 pcs
4x 3000 / 300 / 30 A 4x 3000 / 300 / 30 A
Test probe/clip/leads 5/5/5 4/5/5 A1257 Flex Clamp
1 - 3000A/1V
Temperature probe
8GB SD supplied 8 MB internal Ranges:
Memory RS232, USB and Ethernet RS232, USB
3000/300/30A
Communication 1 1
1 1
PSU & Batteries
Soft carrying bag
RENTAL
Code Information Data Recording:
• S tart measuring period: programmable from 00:00 to 23:59
PQA700-R Hire charge per day • D ata intergration time interval (10ms sampling)
TEST INSTRUMENTS, TOOLS & GENSETS PQA700-H Unit for hiring with Portable programmable from 1-999s (15 min)
Quality Analyser • Data References: Date & Time
• Available memory: 1 MB Ram
PQA702 Parameters: Portable Power Quality Analyser
• M easurement of all electrical variables, harmonic analysis
Windows 95/98 based software • Instantaneous: W, VA, VAr, V, A, TPF, DPF, Hz
• M ax demand: W, VA, A, programmable 1 to 60m and other parameters. Includes printer, carry case and
Accessories included with PQA702 a ccessories.
• Automatic calculation of kVAr necessary to • Printer: Impact Dot Matrix, paper width 54mm
399 compensate low PF • Power Supply: 230VAC ±15% plus internal rechargeable
b attery (Life: 1 hour)
• M aximum and minimum calculations (single phase • Carrying case/weight: 160 x 340 x 510mm / Instrument:
and system v ariables): W, VA, VAr, V, A, DPF, TPF, 3.7kg, the whole set: 10kg
Standard accessories included:
Hz, THD, THD odd, THD even (THD is considered • 4 voltage-measuring cables, length 3m
for both current and voltage) • 1 RS232 cable + 9-25 pole adaptor
• Energies: +Wh, -Wh, +VArh, -VArh +VAh, -VAh (also • 1 power supply cable
• 1 analysis software (PqaSoft)
by time period) • 1 instruction manual (English, Italian & Spanish)
• FFT analysis (harmonic distortion): histogram Compulsory separate insurance is required.
indication up to 50th harmonic, numerical and
percentage indication of harmonic content of both
voltage and current. THD, THD odd, THD even and
single harmonic measurement.
MET
ELECTRICAL INSTALLATION SAFETY TESTERS
Code Description MI-3100-SE MI-3102H-BT MI-3108 MI-3125-BT
Measurement Type Eurotest EASI Eurotest XE Eurotest PV Eurotest
2.5 kV COMBO
AUTOSEQUENCE ® Auto TT (U, Zln, Zs, Uc), TN/RCD (U, Zln, Zs, Rpe), TN ✔ ✔ ✘ ✘
Testing Sequences (U, Zln, Zlpe, Rpe) <550Vac <550Vac <550Vac <550Vac
Voltage 3 phase TRMS & Frequency & Phase Sequence ✔ ✔ ✔ <600V
Voltage Cat, 1000VDC (CatII), 600V cat III, 300V cat IV ✔ ✔ ✔
Earth Bond / Continuity Test Current 7 mA 2-wire & 200 mA 2-wire ✔ ✔ ✘ ✔
RPE 200 mA 3-wire ✘
50-2500V 50-1000V 50-1000V
Insulation Resistance Test Voltages 50-1000V ✔ ✘ ✘
✘ ✔ ✔ ✔
Leakage Current Differential Leakage (optional clamp) ✔ ✔ ✔ ✔
✔ ✘ ✔ ✔
Z Line / Loop Impedance Zline, Zloop, Zs(rcd), Zref,ΔU%,Fuse Tables ✘ ✔ ✘ ✔
RCD RCD type AC,A, F,Uc, (t), I Ramp, Auto ✔ ✔ ✔ ✔
✔ ✔ ✘ ✘
RCD type B,B+ ✘ ✔ ✔ ✘
✘ ✘ ✘
RCD 3-Phase ✘ ✘ to 11nth ✘
✘ ✔ ✔ ✘
Earth / Ground Resistance Earth Resistance 2-wire, 3-wire ✘ ✘
✘ ✘
2-Clamps Earth Resistance ✔
✔ ✔
Functional Power P,Q,PF / Cos ɸ,S, Harmonics, TRMS Current ✘ ✔ ✘
✘ ✔ ✘
Harmonics 1/1/1/1 ✔ 1/1/1/1
✔ 1/1/o/o ✔
Scope ✔
✘ (Optional) ✘
AC&DC Current & Load test ✔
3/3/4 3/3/3
PV Basic Isc, Uoc, Polarity, Module / String / PV Insulation, 2 3/4/4 ✘
Irradiance, Module Temp, I-V Curve, STC Extrapolation, ✘
✘ 4m Test lead ✘
3 x 20mTest lead ✘
PSU Umpp/Impp, PmaxRS, AC/DC efficiency ✔ 1.5m
Scope mode Battery Powered + charger 115/230V ✘ 2 x Test rod 2 ✘
On-line scope mode ✘ ✔ 1.5m ✔
Single / Continuous mode X ✔
✘ ✘
Communication Port USB USB / RS232 / Bluetooth / Android App 1/1/-/1 1.5m ✔ ✘
✔ ✔ ✔ ✘
Internal memory Internal memory ✔ ✔
✘ ✔
AC/DC - Current Clamp DC - Current Clamp / Generator Current Clamp / AC ✘ ✘ ✔
Leakage Current Clamp / PV Pyranometer / Reference ✘
Test leads / Probes / Crocodile clips Standard Set
2.5kV Test leads 3/3/3
✘
Earth Test set
✘
Soft carrying bag ✔ TEST INSTRUMENTS, TOOLS & GENSETS
Schuko-plug test cable
Plug Commander 1.5m
PC Software ✘
Calibration Cerificate ✔
PV Safety Probe & Cell reference & temperature probe ✔
PV MC3/MC4 male/female adapters ✘
AC/DC Current clamp ✘
✘
Accessories
Code A1018-M A1401 A1391 A2026 A1153 A1378 A1436
Current clamp
(Low range,leakage) Tip commander AC/DC Current Earth 20m set, Test lead, black, Eurotest PV Remote Bluetooth dongle
(3-wire) clamp 3 wire 20m for MI-3108
MET 400
DIGITAL ELECTRICAL COMPLIANCE TEST CASE
Electricians electrical compliance test case, instruments required to test for
issue of electrical compliance certificates
Code 2751IN CK-1 (Page 394)
Case Includes TEL1-3 Digital Insulation Tester (Page 394)
MY60 RCD Tester (Page 395)
SSP-8030 Digital Multimeter (Page 404)
MS8907 Digital Phase Indicator (Page 403)
Voltage Finder
20MHZ HANDHELD DUAL CHANNEL SCOPE METER
Technical Specifications DMM Functions
DCV/ACV: 600m/6/60/600/1000V(750V), ±1.0% / 1.2%
Bandwidth: DC ~ 25MHz, dual channels DCA/ACA: 6/60m/600m/6A, ±1.2% / 2.0%
Real-time Sampling Rate: 125M Sa/s OHM: 600/6k/60k/600k/6M/60MΩ, ±1.2%.
Equivalent Sampling Rate: 25G Sa/s CAP: 6n/60n/600n/6µ/60µ/600µF, ±4.0%
Horizontal sensitivity: 10ns/div-50s/div, ±0.01% Audible continuity & diode test
Record Length: 2 x 512k
Vertical sensitivity: 5mV/div-5V/div, ±5% Code DS1022M
Vertical resolution: 8 bit
Rise time: 14ns • DMM built with dual-channel DSO, colour LCD • Built-in 6 digits frequency counter
Trigger type: Edge, Pulse width, Video, Alternate
Max. input voltage: 400V DC + AC peak display • U SB interface, system software upgradeable
Input impedance: 1MΩ //21pF
Waveform maths: +, -, *, /, FFT • A utomatic waveform and status configuration • AC power (100~240V, 50/60Hz) or batteries
Auto measurement: Vpp, Vmax, Vmin, Vtop, Vbase,
Vmid,Vamp, Vavg, Vrms, +Overshoot, -Overshoot, Freq, • E dge, Pulse, Video and Alternate triggers • Dimensions & weight: 268 x 168 x 60mm, approx
Period, Risetime, Falltime, +Width, -Width, ±delay, ±duty
Cursor measurement: V, T • Waveform maths & FFT, auto & cursor 1.8kgs
Frequency counter: 6 digits
Interface: USB2.0 Host measurement • Accessories: AC adaptor, interface wire &
Storage (interval/USB): 10 waveforms + 10 setups
Display: 5.7 inch 320 x 240 pixels color LCD • Display zone for precision waveform analysis software, test leads & probes
• Screen copy, waveform recording and replay
SAFETY GLOVES & MATS
TEST INSTRUMENTS, TOOLS & GENSETS CUST.GI Test V 2500V 5kV 10kV 20kV 30kV
User V 500V 1kV 7.5kV 17kV 26.5kV
CE Approved Size Code Code Code Code Code
VPG90 GI10-8 GI20-8 GI30-8
8 GI2,5-8 GI5-8 GI10-9 GI20-9 GI30-9
GI10-10 GI20-10 GI30-10
9 GI2,5-9 GI5-9 GI10-11 GI20-11 GI30-11
10 GI2,5-10 GI5-10
11 GI2,5-11 GI5-11
Accessories CUST.GI
Protective plastic case for gloves
Pneumatic Tester. This tester inflates the gloves and you can detect VPG90
any perforation on the dielectric of the gloves
IRC-3 26,5kV Insulated Rubber Safety Mat - 3mm thick x 1 m wide – priced per metre
401 3mm x 1 metre (w). Voltage test 30000V, max use voltage 26500V IRC-3
MET
HIGH VOLTAGE TEST EQUIPMENT
High Voltage Proximity Detector High Voltage Multifunction Phasing Sticks
• Lightweight
• Designed for maximum safety
• Carry case included
Code 277HP Code System Voltage Full Scale Voltage Maximum Voltage
The 277HP is a voltage (non contact) proximity PC-7K 6.6kV 8kV 9kV
detector for checking for the presence of AC voltag- PC-11K 11kV 12kV 15kV
44kV 48kV 55kV
es in cables, wall outlets, fuses etc. AC voltages PC-44K
from 50V to 132kV. Response Time <1 sec
PC-7K
• 2 selectable ranges:- LOW: - 50 - 1.5kV Cone Tips Accessories - (for all models)
HIGH: - 1.5kV - 132kV 30mm
Code Description
• Power consumption OFF: - Less than 5μA PC-BK 90º bends (pair)
ON: - Less than 40mA Cone Tips
• Test Button: Test the system prior to measurement 70mm PC-C1K 30mm cone tips (pair)
• Operating Temperature :- 0°C - 40°C
• Dimensions:- (LxWxØ) 318x75x71mm Specifications PC-C2K 70mm cone tips (pair)
• Power Source 1 x 9V (6F22) battery
• Std's: EN61326-1 / EN61000-4-2 / EN61000-4-3 Code PC-11K PC-44K
• Supplied with:- Manual, Battery, Carry case. Total resistance ±3.95MΩ ±6.78MΩ ±27MΩ
Neon threshold 1.2kV 1.2kV 1.2kV
Accessories - Hotsticks Neon fully lit @
Handle length 1.5kV 1.5kV 1.5kV
Front end length
Code HS-* Total length 765mm 765mm 765mm
Total weight
Standards approval to IEC 62193. Handle material 340mm 340mm 760mm
Rated at 100kV per 300mm / 5 minutes Operating temp.
*Add Length to Code 120 = 1200mm long 1105mm 1105mm 1525mm
800 = 800mm long ±1.2kg ±1.2kg ±1.5kg
Composite material with polyurethane Front end: Fibre glass wound tubing
- 25°C to +55°C Operating hum idity: 20 to 96% RH
500 = 500mm long Personal Safety Voltage Detector
Disconnect Hook Fuse Extractor Code 286-SVD
Sensing Distance 800mm @ 11,4kV 50/60Hz
Volume 70dB @ 1m
Size 59 x 56 x 18mm
HOK-HS166 ADP-HS120 When approaching a high voltage source the buzzer will sound
and LED will flash to alert the user. Waterproof Design.
Short Circuiting and Grounding
Short circuiting and grounding equipment for electrical cabinets and MV installations
with universal contact clamps
Code Description
MT/BM-25 Standard type. lcc: 13,7kA eff / 0.25s With short circuit cables section TEST INSTRUMENTS, TOOLS & GENSETS
25mm2
MT/BM-50 With short circuit cables section 50mm2 Icc: 13kA eff / 0.5s
MT/BM-95 With short circuit cables section 95mm2 Icc: 24kA eff / 0.5s
MT/BM Certificate complies to the International Standard CEI EN 61230 (CEI IEC 1230)
Fuse Extraction Rod
EF30 Insulating Rod for fuse extraction and installation
on systems with working voltages up to 30kV
EF30
Phasing and Voltage Detector of MV Presence / Absence by Visual
Signalling (Indoor Use)
Code Description
RMB36
• Double poles voltage detector
RMB36 • Phase relationship detector
c/w case • HV fuse tester
• Operating range: 5/36 kV
• Total length of each rod complete with antenna: 1,17m
MET 402
VOLTAGE TESTERS
CAT III 600V CAT III 1000V
Code 901 MV-400 MV3 BESTEST 8
• DCVoltage:120-220-440-750V • Test Voltage AC/DC: • Test Voltage AC/DC: • Testing Voltage AC & DC:
• ACVoltage:125-220-380-500-750V 6-400VDC or AC RMS 6-400VDC or AC RMS 6-400VAC/DC
• Cable: 1m in length • Polarity test. • Polarity test. • Phase indication via LED
• Double insulated handles against • Max Testing Time: 30sec • Max Testing Time: 30sec • Polarity via LED
electricity & heat. Neon • LED Bargraph Display • LED Bargraph Display • Test Earth Leakage CB
indication for voltage present & • Continuity/Semi-conductor
bright indicator for voltage range. test 0-1MΩ.
• Max Testing Time: 30sec
Magnetic Field Tester
Code GK12A MS8211 BESTEST 18 AC-8M
• AC/DC Voltage measurement: • DC V: 600V, AC V: 600V • AC Voltage: Contact Test • Testing of solenoids and relays
10-690VAC/DC • Diode & Continuity Test 100-500VAC • The test lamp illuminates when
• Rotary field indication • OHM: 200Ω to 20MΩ • Non Contact Test: 70-10000VAC a magnetic field is present
• Continuity test • Non-contact AC voltage • Continuity Check: 0-50MΩ • No metallic contact is required
• Order batteries separately detection • Microwave leakage detection, • Responds to AC and DC
• Auto Ranging. Data/Max value 5mW sq cm magnetic fields and permanent
hold • Polarity test: 1.2-36VDC magnets
Voltage Finders
Code MS8900 MS8907 M38900 BESTEST 7 TESTBOY20
• Non contact voltage detection • Non contact voltage detection • 100 - 240VAC • AC Voltage: 100-500VAC • Contactless voltage
• Contact Test detector
• 5mm Sensing range • 5mm Sensing range • 2xAAA bat(incl.)
• Buzzer / LED indication • Buzzer / LED indication • Fits in your pocket • High performance LED
• 100 - 240VAC • Work light (torch) • Easy to use, just touch torch
the tip to an outlet or
• 50 - 1000VAC cord, when it glows red, • Continuity indication via
• Low Battery Indication lamp or buzzer
you know there’s voltage
Battery Testers Automative Current Tester
Code BT-12 AT-953 BT-6 Maxi-Blade Mini-Blade
CF-02 CF-02S
• 12VDC battery analyser • Battery Tester • 3 in 1 Battery/Bulb/Fuse tester
TEST INSTRUMENTS, TOOLS & GENSETS • Voltage test: 8-25VDC • Car lighter plug • To test batteriestypes: AA, AAA, • Measuring range:
• On load battery test - • 5 indicators: C, D, 9V, E, I, SV & PV 20A @ 48VAC/DC (10sec. max)
Evaluates battery’s Low/Fair/Normal/ • Resolution: 10mA
ability to crank engine Full & Over • Cable length: 75cm
• Charging system test • Plugs straight into automotive
• Starter motor test fuse holder in car
Code MD-1055 MD-1150 MD-115
• Non-contact voltage tester that features a
403 • Multi-functional • LCD Display for voltage testing up to 1000V visual display indicator.
• Detects 12V to 1000VAC
• LED voltage levels indication for 24 - 1000V • Continuity testing up to 2000Ω • Voltage: Cat III / 1000
• Continuity Buzzer, Phase and rotating field test • Data Hold
• Diode Test, RCD Trip testing • Auto AC/DC recognition
• Voltage: Cat III / 1000 • Voltage: Cat III / 1000
MET
Phase Sequence Digital Phase TEST EQUIPMENT SMD Tester Multi-Tester
Indicator Indicator
Phase Sequence Capacitance Meter
Indicator
Non Contact
ST-850 SSP-8030 890PR TES-1500 MS8910 MS319
• Check phase sequence • D esigned to check the • Non contact phase • Fuse protection all • LCD display • Easy Read Scale
• Open phase check presence of open sequence testing
• Large alligator clips phase and phase • Open phase testing ranges • Auto / Manual Range • Mirror Scale
allow for easy sequence by LED and • Led and buzzer
connection & testing buzzer at the same indication • Zero adjustment ±20pF • Auto Power Off • Zero Ohms Adjust
• 90-600VAC range time • Operational Voltage:
• 50/60Hz 75-1000VAC 3PH • Direct insert jacks • Low battery indicator • Battery Test (1.5 / 9V)
• Instruction manual Specifications • Frequency Range:
• Carrying case • Operational Voltage: 45-65Hz • 9 overlapping ranges • Continuity / Diode Test
• Magnetic mounting
200-480V AC three bracket • Test leads & battery • Ohms: 3kΩ - 30MΩ • Volts AC: 10V - 1000V
phase • Dual slope intergration • Capacitance: 3nF-30mF • Volts DC: 2.5V - 1000V
• Time limit for
continuous use: 60 • Display rate 2 per • Weight: 300g • Amp DC: 5ma - 10A
minutes max. at 200V second
AC. 4 minutes max. at • Size:189 x 91 x 31.5mm • Ohms: 0 - 10MΩ
480V AC
• F requency range: • Test frequencies per
20Hz-400Hz
• A ccessories: double range:
insulated cords, probes
for test leads 800Hz: 200pf - 2µF
80Hz: 20µF
8Hz: 200µF - 20000µF
Electronic Test Kit Schuko Socket Schuko Socket CEE-adapter with British Socket Meter + Engine
Outlet Outlet Tester Phase Rotation Outlet Tester Analyser
Indication - 3P+N+E
& RCD Tester
ETK03C SCHUKI-2 SCHUKI-3 TV400-* MS6860E MS8239D TEST INSTRUMENTS, TOOLS & GENSETS
Blister Pack Contains: • Confirms correct wiring • Confirms correct * Add current rating to • D esigned to test 110V • Backlit LCD display
• Dwell Test 4 / 6 / 8
GK7: Non-contact voltage tester of outlet wiring of outlet code: 16A, 32A or 220V sockets in 1 cylinder
• Tach Test 4 / 6 / 8
with LED and audio alarm; Voltage • Adj. RCD triggering • Output via glowing • Confirms correct wiring easy step cylinder
• Auto ranging
Range: 50 - 1000VAC 50-500Hz • Trip settings: 10-500mA lamps • Indicates phase • Clear LED indication of • Max data hold
EM306B: Digital Clamp meter • Size: 100 x 50 x 75mm rotation wiring errors including • VAC: 200mV - 600V
• VDC: 200mV - 600V
Continuity test, Auto zero, Diode • Can be used with missing earth, live/earth • AC Current: 10A
• DC Current: 10A
check, Data hold, Voltage Range: SCHUKI-2 to test RCD reverse, live/neutral • Resistance:
200Ω - 20MΩ
300VAC/ DC, AC Current 20-400A, reverse, missing neutral
Resistance: 2kΩ-200kΩ
DT830: Digital multimeter;
Continuity test, Diode check
Voltage range: 200mV-600VDC /
200-600VAC,
Current Range: 2000µA-10ADC
Resistance: 200Ω-2MΩ
Batteries Included
MET 404
Sound Level Anemometer TEST EQUIPMENT Lightmeter
Calibrator
Laser Tachometer Contact Tachometer Digital Sound Level
SC-05 MS6252A MS6208B MS6208A MS6700 MS6610
• 94db and 114db • Backlit LCD display • Backlit LCD display • Backlit LCD display • Backlit LCD display • Measures 0-50 000 Lux
calibration at 1kHz. • Bargraph indication • Non Contact measurement • Contact measurement • Max data hold for wide range of use
• Accurate & simple to use • Max/Min & Data hold • Auto power off • Auto power off • Over/Under range indication • Auto zero adjustment
• Fits 1/2inch diameter • Low battery indication • Max/Min/Avg Data hold • Max/Min/Avg Data hold
microphone • Air Flow Calculation • Data logging • Data Logging • Fast/Slow selection • High Accuracy
• Output Frequency: • Auto power off • Low battery indication • Low battery indication
1000HZ, ±4% Meter/sec: 0.8 - 30m/s Range: 50 - 99999RPM • Auto/Manual ranging • Data Hold & separate
• Auto power off sensor allow easy mea-
• Bargraph indication surement from the optimal
• Reference Temp: Feet/min: 80 - 5900 ft/m Measure Distance: Range: 50 - 19999RPM • Low battery indication position
>23°C (73°F) Kilometre/h: 1.4-108km/h 50 - 250mm
• Data logging 16000 records • Range:
• Atmospheric pressure: Mile/h 0.9-67mi/h • Date/Time display 2000/20 000/ 50 000 Lux
>1013mbar (760mm of Hg) Knots 0.8-58knots/h Range: 30dB - 130dB • Accuracy: ±5%
• Relative humidity: >35%RH Resolution: 0.1dB • Resolution: 1 Lux
• Accuracy of sound Freq range: 30Hz - 8KHz
pressure level understated
reference conditions ±0.5db
CO Analyser Coating Thickness Tester
Code TES-1372 Code TESTBOY70
• CO range: 0-900ppm (CO) • Range: 0-1000µm/ 0-40mil
• Max hold with time stamp • Size: 158 x 74 x 31mm
• Alarm level setting & replaceable sensor • c/w two probes
• A utomatic zero on start-up • Measures non-magnetic coatings on steel or iron
• A ccuracy ± 5% of reading or ±2ppm - whichever is greater • Also measures insulating coatings on non-magnetic metals
• A uto power off & b ack-light for display
TEST PROBES
TEST INSTRUMENTS, TOOLS & GENSETS Code ASL2 AL-12 AL-14 FC-A23 PLSS150R Red /R /BK
Car Fuse Adapter Black & Red PLSS150B Black SP1322-R Red
Insulated Crocodile
Lead with 4mm Plug to fit SP1322-BK Black
Clips (pair) Digital Multimeters and
Banana Plugs
other test probes. 4mm Male Plug with
plastic handle
KSY-6005B FC-170A
Black and Red Test Probe (pair)
Black shaft with single pointed gripping jaws
AL-25 AL-26 CF-01 CF-01S KSY-6005R FC-A15
MAXI-Blade MINI-Blade
405 Red shaft with single pointed gripping jaws Black and Red Test Clips (pair)
MET
The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
ACDC FULL MAIN CATALOGUE 2016.compressed
Discover the best professional documents and content resources in AnyFlip Document Base.
Search
ACDC FULL MAIN CATALOGUE 2016.compressed
- 1 - 50
- 51 - 100
- 101 - 150
- 151 - 200
- 201 - 250
- 251 - 300
- 301 - 350
- 351 - 400
- 401 - 450
- 451 - 500
- 501 - 550
- 551 - 600
- 601 - 650
- 651 - 700
- 701 - 750
- 751 - 792
Pages: