Premier_Industries_Product_Catalog

Page 51

ors, valves, and Torc
hes
Min
2500 SINGLE STAGE r e g u l at
SERIES DIAPHRAGM SENSED USA
GENERAL PURPOSE PREMIER INDUSTRIES
Pressure Reducing Regulators
neapolis M i n n e s o ta

S P E C I F I C AT I O N S XXX 70° 0

• MAXIMUM INLET PRESSURE: 3500 PSIG (241.3 bar) GAUGES 0 3000 55°
• CONTROL PRESSURE RANGES: (OPTIONAL) 55°

• 0-10 PSIG (0 - 0.69 bar) OUT I NC R E A SE IN
• 0-25 PSIG (0 - 1.72 bar) 1/4-18 NPT 1/4-18 NPT
• 0-50 PSIG (0 - 3.45 bar)
• 0-100 PSIG (0 - 6.89 bar) OUT +- IN
• 0-250 PSIG (0 - 17.24 bar) 1/4-18 NPT 1/4-18 NPT
• 0-500 PSIG (0 - 34.47 bar) E DE CR E AS
• FLOW (Cv): 0.08, or 0.20
Ø1.75

MATERIALS OF CONSTRUCTION PANEL MOUNTING PPIANRRELMTE#TIE5:R0X-IXN1X1D9XU6SP2TS-XRIGXIES 5.1
NUT (OPTIONAL) OUTLET: XXX PSIG
• BODY OPTIONS: USE 1.50/1.45 PANEL A
CUT-OUT
• Body diameters: 1.5” and 1.98”
1 7/16-20 UN
• 316 Stainless Steel MTG THREADS
• SAE 360 Brass
• SAE 360 Brass/Nickel Plated 1/8" NPT
• 6061-T6 Aluminum RANDOM
• Monel® ORIENTATION
• BONNET OPTIONS:
• SAE 360 Brass .75
• SAE 360 Brass/Nickel Plated
• 6061-T6 Aluminum/Gold Anodize A Ø1.98
• Captured 6061-T6 Aluminum/Nickel Plated
• DIAPHRAGM OPTIONS: 10-32 X .25 DEEP
• Neoprene 2 HOLES
• 316 Stainless Steel
• Elgiloy® (Monel® body option) OUT IN
• DIAPHRAGM SEAL: Teflon® 1/4-18 NPT 1/4-18 NPT
• VALVE SEAT: Teflon®

OUT IN
1/4-18 NPT 1/4-18 NPT

PORTING VIEW A-A

• INLET/OUTLET OPTIONS (Part number 50-11962 above)
• 1/8 FNPT
• 1/4-18 NPT (on 1.98” diameter bodies) Ø1.37
• SAE 1926-4 (on 1.98” diameter bodies)

OPTIONS PANEL MOUNTING
NUT (OPTIONAL)
USE 1.50/1.45 PANEL

CUT-OUT

• Gauges 1 7/16-20 UN 3.86
MTG THREADS

• Integral shut off valve (P/N: 50-12619) 1/8” NPT PREMIER

• Private label 3.7 P/N 50-11412-X
• Panel mounting nut(s) (P/N: 50-10240) Ø1.50
• Pressure relief valves RANDOM INLET 3000 PSIG
ORIENTATION OUTLET XXXPSIG

• CGA connections
• Dome loaded design (P/N: 50-11789)
• Ø1.98 diameter body without mounting holes (P/N: 50-11470)

Te on® is a registered trademark of E.I.duPont de Nemours and Company Ø1.63 1.50
Monel® is a registered trademark of Special Metals Corporation 1.63
Elgiloy® is a registered trademark of Elgiloy Special Metals Division, (Part number 50-12357 shown
Combined Metals of Chicago L.L.C above) (Part number 50-11412 shown
above w/ acorn nut)

D/C: 180802

ors, valves, and Torc SINGLE STAGE Page 52
hes DIAPHRAGM SENSED
Min GENERAL PURPOSE 2500
r e g u l at Pressure Reducing Regulators SERIES
USA
PREMIER INDUSTRIES

neapolis M i n n e s o ta

Ø1.98 BODY WITH MOUNTING HOLES

PART # -1 2 3 4 5 6 7 8
50-11962 -

1 BODY MATERIAL 4 GAUGES 6 PORTING 7 PORT TYPE
& FINISH OPTIONS

2 316 Stainless Steel, Blank no gauges Blank Blank NPT (1/4”)
cleaned per spec #515 (standard)
(Standard)
3 6061-T6 Aluminum, 2” diameter, inlet 2 SAE J1926-4
Clear Anodized A (1/4”)
A only, stainless steel
5 SAE 360 Brass, B
Nickel Plated wetted gauge
2” diameter, outlet C MAIN VALVE
Monel®, (Elgiloy® diaphragm) 8 Cv
cleaned per spec #515 B only, stainless D
6
steel wetted gauges E
8 SAE 360 Brass, 2” diameter, inlet Blank Cv 0.08
Bright Dip (Standard)
C & outlet, stainless
2 DIAPHRAGM Cv 0.20
MATERIAL steel wetted gauges
2” diameter, inlet Y without lter

D only, brass (Hydraulic)

Blank 316 Stainless Steel wetted gauges Z Cv 0.20
Diaphragm 2” diameter, outlet

N Neoprene diaphragm E only, brass

3 OUTLET PRESSURE wetted gauges F Monel® is a registered trademark
(outlet gauge range, if supplied) 2” diameter, inlet of Special Metals Corporation

F & outlet, brass Elgiloy® is a registered trademark

wetted gauges of Elgiloy Special Metals
2” diameter, outlet
0 0 - 10 PSIG / 0 - 0.69 bar G Division, Combined Metals of
(per application) H only, brass wetted/ Chicago L.L.C

1 0 - 25 PSIG / 0 - 1.72 bar chrome plated gauges H
(0-60 PSIG gauge) 2” diameter inlet

J & outlet brass wetted/

chrome plated gauges

0 - 50 PSIG / 0 - 3.45 bar 5 PANEL MOUNTING I
(0-100 PSIG gauge) NUT (optional)
2

5 Mounting nut

3 0 - 100 PSIG / 0 - 6.89 bar 8 No nut (standard) J
(0-160 PSIG gauge)

0 - 250 PSIG / 0 - 17.24 bar K

4 (0-400 PSIG gauge)

(Stainless steel diaphragm only)

5 0 - 500 PSIG / 0 - 34.47 bar L
(Stainless steel diaphragm only)

Contact factory for material certi cations. Fees may apply. D/C: 182707

ors, valves, and Torc SINGLE STAGE Page 53
hes DIAPHRAGM SENSED
Min ABSOLUTE PRESSURE 2500A
r e g u l at Pressure Reducing Regulators SERIES
USA
PREMIER INDUSTRIES

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 2500A Series regulators are single stage, • Full vacuum sub-atmospheric pressure control
diaphragm sensed, absolute pressure regulators. • Stainless steel diaphragm minimizes
They can be used to reduce supply pressures up to
3000 PSIG (206.84 bar) into a vacuum inboard diffusion of air into regulator
environment for sub-atmospheric pressure control. • Optional panel mounting nut
Premier 2500A Series regulators feature a • Bottom mounting holes (#10-32 UNF, 2X)
stainless steel diffusion-resistant metal diaphragm, • Non-venting
Cv 0.08, captured (non-relieving) bonnet, inlet • Captured (non-relieving) bonnet
filter, and optional panel mount or bottom mount. • 15 micron sintered inlet filter
• 3000 PSIG (206.84 bar) max inlet pressure
• Cv 0.08
• Machined bar stock body, bonnet, and piston

eliminates porosity found in castings

e Premier 2500A Series pressure reducing regulator’s design is remarkably exible. D/C: 183004
Contact Premier Industries for a custom 2500A Series regulator to meet your exact needs.

Page 54

ors, valves, and Torc
hes
Min
SINGLE STAGE r e g u l at
DIAPHRAGM SENSED USA
2500A ABSOLUTE PRESSURE PREMIER INDUSTRIES
SERIES Pressure Reducing Regulators
neapolis M i n n e s o ta

S P E C I F I C AT I O N S A PREMIER INDUSTRIES A
50-11631-XX
• MAXIMUM INLET PRESSURE: 3000 PSIG (206.84 bar) PANEL MOUNTING 5.2
• CONTROL PRESSURE RANGES: NUT (OPTIONAL) INLET: 3000 PSIG MAX
USE 1.50 / 1.45 OUTLET: 28"Hg
• 50 mm Hg absolute - 15 psig (1.0 bar) PANEL CUT-OUT
• 50 mm Hg absolute - 50 psig (3.4 bar)
• 50 mm Hg absolute - 100 psig (6.9 bar) 1 7/16-20 UN
• 50 mm Hg absolute - 350 psig (24.1 bar) MTG. THREADS
**50 mm Hg absolute = 28” Hg
• FLOW (Cv): 0.08 BONNET VENT
1/8 NPT RANDOM
MATERIALS OF CONSTRUCTION
ORIENTATION
• BODY:
• SAE 360 Brass/Nickel Plated .75 .75
#10-32 UNF 2X
• BONNET:
• SAE 360 Brass/Nickel Plated OUTLET GAUGE (optional)

• DIAPHRAGM: 2000
• 316 Stainless Steel
0
• DIAPHRAGM SEAL: Teflon®
• VALVE SEAT: PFA Teflon® 30 0
• INLET FILTER: 15 micron sintered bronze
-30 70° 4000
PORTING
OUT 55° INLET GAUGE
• INLET: (optional)
• 1/4-18 NPT I NCRE ASE

• OUTLET: OUT +- IN
• 1/4-18 NPT (28” Hg VAC-15 PSIG) Ø2.0 BODY
E DE CR E AS VIEW A-A
• CAPTURED BONNET VENT:
• 1/8 NPT Ø1.75 KNOB

(Part number 50-11631 shown above)

OPTIONS

• Gauges (2.5 inch diameter, brass nickel plated)
• Private label
• Panel mounting nut (P/N: 50-10240)

Te on® is a registered trademark of E.I.duPont de Nemours and Company D/C: 182304
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc DOME LOADED Page 55
hes SINGLE STAGE
Min DIAPHRAGM SENSED 2500DL
r e g u l at Pressure Reducing Regulators SERIES
USA
PREMIER INDUSTRIES

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 2500DL Series regulators dome loaded, • Compact size
single stage, diaphragm sensed, pressure reducing • Optional stainless steel diaphragm minimizes
regulators are rated for inlet pressure up to 3000
PSIG (206.84 bar), control pressures up to 500 inboard diffusion of air into regulator (model with
PSIG (34.47 bar), and Cv 0.08 or 0.20. Models neoprene diaphragm also available)
are available for both corrosive and non-corrosive • 3000 PSIG (206.84 bar) max inlet pressure
service, fitted with your choice of stainless steel or • Cv 0.08 or 0.20
neoprene diaphragm. • Non-venting
• Machined bar stock body, bonnet, and piston
eliminates porosity found in castings

e Premier 2500DL Series pressure reducing regulator’s design is remarkably exible. D/C: 180105
Contact Premier Industries for a custom 2500DL Series regulator to meet your exact needs.

DOME LOADED Page 56
SINGLE STAGE
DIAPHRAGM SENSED ors, valves, and Torc
Pressure Reducing Regulators hes
Min
2500DL r e g u l at
SERIES USA
PREMIER INDUSTRIES

neapolis M i n n e s o ta

S P E C I F I C AT I O N S 1/4 NPT

• MAXIMUM INLET PRESSURE: 3000 PSIG (206.84 bar) PREMIER INDUSTRIES .41 TYP
• MAXIMUM CONTROL PRESSURE: 500 PSIG (34.47 bar) PART# 50-11789-XXX 2.09
• FLOW (Cv): 0.08, or 0.20 INLET: 3000 PSIG MAX.
• LOAD RATIO:
OUTLET: 500 PSIG
• Stainless steel diaphragm: 1:1**
• Neoprene diaphragm: 0.785:1 Ø.19 BLIND (SPANNER 3000 PSIG
WRENCH HOLE- MAX IN.
MATERIALS OF CONSTRUCTION RANDOM ORIENTATION)
IN
• BODY OPTIONS: XXX
• 316 Stainless Steel
• SAE 360 Brass, Bright Dip Ø1.98
• SAE 360 Brass, Nickel Plated
(Part number 50-11789 shown above)
• BONNET OPTIONS:
• 316 Stainless Steel PREMIER INDUSTRIES
• SAE 360 Brass, Bright Dip PART# 50-11789-XNXX
• SAE 360 Brass, Nickel Plated INLET: 3000 PSIG MAX.

• DIAPHRAGM OPTIONS: OUTLET: 500 PSIG
• Neoprene 2.34
• 316 Stainless Steel
3000 PSIG
• DIAPHRAGM SEAL: PTFE MAX IN.
• VALVE SEAT: PCTFE
IN
PORTING XXX

• INLET:
• 1/4 FNPT

• OUTLET:
• 1/4-18 NPT

• DOME PORT:
• 1/4-18 NPT

OPTIONS (50-11789-XNXX neoprene diaphragm
model shown above)
• Private label
• Gauges

D/C: 160410

ors, valves, and Torc DOME LOADED Page 57
hes SINGLE STAGE
Min DIAPHRAGM SENSED 2500DL
r e g u l at Pressure Reducing Regulators SERIES
USA
PREMIER INDUSTRIES

neapolis M i n n e s o ta

PART # -1 2 3 4
50-11789 -

BODY MATERIAL 4 PORTING
CONFIGURATIONS
1 & FINISH

1 316 Stainless Steel, 1
cleaned per spec #515

3 SAE 360 Brass, 2
Nickel Plated

4 SAE 360 Brass, 3
Bright Dip

2 DIAPHRAGM 4
MATERIAL

Blank 316 Stainless Steel 5
Diaphragm

N Neoprene diaphragm

6

3 MAIN VALVE
Cv

0 Cv 0.08

2 Cv 0.20

Contact factory for material certi cations. Fees may apply. D/C: 160606

ors, valves, and Torc DOME LOADED Page 58
hes
Min BIAS SPRING 2500DLB
r e g u l at DIAPHRAGM SENSED SERIES
USA Pressure Reducing Regulators
PREMIER INDUSTRIES

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 2500DLB Series dome loaded/bias • Compatible with electro pneumatic controllers
spring, single stage, diaphragm sensed, pressure • Elastomer free
reducing regulators, are rated for inlet pressure up • Designed for tracking applications
to 3000 PSIG (206.84 bar), load pressures up to • 3000 PSIG (206.84 bar) max inlet pressure
500 PSIG (34.47 bar), and Cv 0.08 or 0.20. • Cv 0.08 or 0.20
2500DLB Series regulators are elastomer free and • Non-venting
designed for use in tracking applications.

e Premier 2500DLB Series pressure reducing regulator’s design is remarkably exible. D/C: 180105
Contact Premier Industries for a custom 2500DLB Series regulator to meet your exact needs.

DOME LOADED Page 59

BIAS SPRING ors, valves, and Torc
DIAPHRAGM SENSED hes
Pressure Reducing Regulators Min
r e g u l at
USA
2500DLB PREMIER INDUSTRIES
SERIES
neapolis M i n n e s o ta

S P E C I F I C AT I O N S

• MAXIMUM INLET PRESSURE: 3000 PSIG (206.84 bar)
• MAXIMUM LOAD PRESSURE: 500 PSIG (34.47 bar)
• PRESET SPRING BIAS: up to 150 PSIG (10.34 bar)
• FLOW (Cv): 0.08, or 0.20

MATERIALS OF CONSTRUCTION OUTLET PORTS: 1/4-18 FNPT

• PROCESS WETTED MATERIAL OPTIONS: OUTLET PRESSURE =
• 316 Stainless Steel
• 303 Stainless Steel DOME LOAD PRESSURE +
• Monel 405® & Elgiloy® SPRING BIAS PRESSURE
• SAE 360 Brass, Nickel Plated
DOME LOADING PORT:
• DIAPHRAGM: 1/4-18 FNPT, 500 PSIG MAX
• 316 Stainless Steel
SPRING BIAS ADJUSTMENT SCREW
• VALVE SEAT: 150 PSIG MAX SPRING BIAS
• PCTFE
1.73
• SEALS:
• PTFE INLET: 1/4-18 FNPT .41
3000 PSIG MAX TYP
• OTHER WETTED MATERIALS (DOME SIDE):
• 303 Stainless Steel (for 303 stainless steel process 3.5
option)
• 316 Stainless Steel (for 316 stainless steel & Monel
Process options)
• SAE 360 Brass, Nickel Plated (for SAE 360 Brass
nickel plated option)

PORTING

• INLET:
• 1/4” FNPT

• OUTLET:
• 1/4” FNPT

• LOAD PORT:
• 1/4” FNPT

OPTIONS (Part Number: 50-12473 shown above)

• Private label
• Gauges

Monel® is a registered trademark of Special Metals Corporation D/C: 172604
Elgiloy® is a registered trademark of Elgiloy Specialty Metals Division, Combined Metals of Chicago L.L.C

ors, valves, and Torc DOME LOADED Page 60
hes
Min BIAS SPRING 2500DLB
r e g u l at DIAPHRAGM SENSED SERIES
USA Pressure Reducing Regulators
PREMIER INDUSTRIES

neapolis M i n n e s o ta

PART # - 1 2 3 - XXX
50-12473 --

1 PROCESS XXX PRESET SPRING BIAS
WETTED MATERIALS
**Preset spring bias pressure at 3000 psig inlet pressure.
1 316 Stainless Steel Specify 0-150.
Pressure units are psig.
2 303 Stainless Steel (EX: specify ‘30’ for 30 psig spring bias pressure.)
Preset spring bias pressure is eld adjustable by quali ed technicians only.

3 Monel 405® & Elgiloy®

4 SAE 360 Brass, Nickel Plated

2 PORTING OPTIONS

‘A’ Porting, no gauges

1

‘C’ Porting, no gauges
1/8” FNPT

2

‘I’ Porting, no gauges 1/8”FNPT

3

1/8” FNPT

3 FLOW COEFFICIENT
(Cv)

1 Cv 0.08 max

2 Cv 0.20 max

Monel® is a registered trademark of Special Metals Corporation D/C: 172604
Elgiloy® is a registered trademark of Elgiloy Specialty Metals Division, Combined Metals of Chicago L.L.C

Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 61
hes
Min 2510
r e g u l at DIAPHRAGM SENSED SERIES
USA
PREMIER INDUSTRIES S TA BLE S E T P RESSURE
Pressure Reducing Regulators

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 2510 Series pressure reducing regulators • Reduced decaying inlet characteristic
are part of a new family of Stable Set Pressure (supply pressure effect) in a single stage design
(SSP) regulators from Premier Industries. These
single stage regulators are equipped with new • Cv 0.20
technology that enables increased stability in • 3500 PSIG (241.3 bar) max inlet pressure
delivery pressure and a significantly reduced • Machined bar stock body & bonnet,
supply pressure effect (decaying inlet characteristic).
These diaphragm sensed, general purpose cylinder eliminates porosity found in castings
and line regulators are available with a wide range • Optional integral outlet pressure relief valve
of materials/porting options. The Premier 2510 • Economical pricing
Series feature the choice of a neoprene or 316 • Optional integral needle style shut off valve
stainless steel diaphragm, max inlet pressure of • Optional low profile hand knob
3500 PSIG (241.3 bar) and Cv 0.20. • Compact 1.5 inch diameter body option available

e Premier 2510 Series pressure reducing regulator’s design is remarkably exible. D/C: 182707
Contact Premier Industries for a custom 2510 Series regulator to meet your exact needs.

Page 62

ors, valves, and Torc
hes
Min
2510 DIAPHRAGM SENSED r e g u l at
SERIES USA
S TA B LE SE T P RESSURE PREMIER INDUSTRIES
Pressure Reducing Regulators

neapolis M i n n e s o ta

S P E C I F I C AT I O N S OPTIONS

• MAXIMUM INLET PRESSURE: 3500 PSIG (241.3 bar) • Gauges, brass wetted components, finish to match
• CONTROL PRESSURE RANGES: body/bonnet finish

• 0-10 PSIG (0 - 0.69 bar) • Body/material finishes and diameters
• 0-25 PSIG (0 - 1.72 bar) • Private label
• 0-50 PSIG (0 - 3.45 bar) • Panel mounting nut
• 0-100 PSIG (0 - 6.89 bar) • Bottom mounting holes
• 0-250 PSIG (0 - 17.24 bar) stainless steel diaphragm only • Pressure relief valves
• 0-500 PSIG (0 - 34.47 bar) stainless steel diaphragm only • CGA connections
• FLOW (Cv): 0.20

MATERIALS OF CONSTRUCTION OPTIONAL GAUGES PANEL MOUNTING NUT,
2.0 USE 1.50/1.45 PANEL
• BODY/BONNET MATERIAL OPTIONS CUT-OUT
• SAE 360 Brass, Bright Dip (body & bonnet) (PANEL MOUNT
• SAE 360 Brass, Nickel Plated (body & bonnet) OPTION ONLY)

• 303 Stainless Steel (body), Brass Nickel Plated (bonnet)

• 316 Stainless Steel (body), 303 Stainless Steel (bonnet)

• DIAPHRAGM OPTIONS:

• Neoprene OUT IN

• 316 Stainless Steel 2.0 4.8 MAX
• O-RING SEAL MATERIAL: OPTIONAL RELIEF VALVE .41 TYP PORTS

• Nitrile

• Viton®

• EPDM (Part number: 50-12308-2I-XX-X2-22 shown above)
• Neoprene

• Kalrez® (contact factory for pricing)

• VALVE SEAT:

• PCTFE .438
• PTFE .875
• OTHER WETTED COMPONENTS:

• SAE 360 Brass & 300 Series Stainless Steel

• OPTIONAL GAUGES: OUT IN

• 2.0” diameter, brass wetted components,

finish to match body/bonnet finish 5.2 MAX

PORTING .75 TYP 10-32 UNF - 2B
PORTS .25, 2X
• INLET: (BOTTOM
MOUNT (BOTTOM
OPTION ONLY) MOUNT
OPTION)

• 1/8 FNPT

• 1/4 FNPT (Part number: 50-12308-1C-XX-X1-13 shown above)

• OUTLET:

• 1/8 FNPT

• 1/4-18 NPT (on 1.75” and 2.0” diameter bodies)

Viton® and Kalrez® are registered trademarks of E.I.duPont de Nemours and Company. D/C: 182707

ors, valves, and Torc Page 63
hes
Min 2510
r e g u l at DIAPHRAGM SENSED SERIES
USA
PREMIER INDUSTRIES S TA BLE S E T P RESSURE
Pressure Reducing Regulators

neapolis M i n n e s o ta

PART # -1 2 -3 4 -5 6-7 8 9
50-12308 ----

1 BODY/BONNET 3 MAIN VALVE SEAT 6 GAUGES
MATERIAL & FINISH MATERIAL (see note 1)

1 SAE 360 Brass, Bright Dip 1 PCTFE 1 No gauges
(body & bonnet)

2 SAE 360 Brass, Nickel Plated 2 PTFE
(body & bonnet)
2 Include gauges
303 Stainless Steel (body), O-RING SEAL
4 MATERIAL
3 SAE 360 Brass, Nickel Plated
7 RELIEF VALVE
(bonnet) (see note 2)

4 316 Stainless Steel (body), 1 Nitrile
303 Stainless Steel (bonnet)

2 PORTING 2 Viton® 1 No relief valve
OPTIONS

S 3 EPDM 2 Include relief valve

4 Neoprene 8 MOUNTING

A

5 Kalrez® (contact factory for pricing) 1 None
2 Panel mount
B 5 OUTLET PRESSURE
C (outlet gauge range)

1 0 - 10 PSIG / 0 - 0.69 bar 3 Bottom mount
(per application)

D Panel mount
& bottom mount
2 0 - 25 PSIG / 0 - 1.72 bar 4
(0-60 PSIG gauge)
E
DIAPHRAGM
3 0 - 50 PSIG / 0 - 3.45 bar 9 MATERIAL
(0-100 PSIG gauge)

F 0 - 250 PSIG / 0 - 17.24 bar Blank Neoprene
G
4 (0-400 PSIG gauge) Outlet pressure:
100 psig (6.89 bar) max
stainless steel diaphragm only
H 316 Stainless Steel
0 - 500 PSIG / 0 - 34.47 bar
S Outlet pressure:
5 (0-600 PSIG gauge)
500 psig (34.47 bar) max
stainless steel diaphragm only
NOTES:
I 6 0 - 100 PSIG / 0 - 6.89 bar 1. INLET GAUGE ON S,D,F,G,H, & I
1/8 FNPT (0-160 PSIG gauge) 2. RELIEF VALVE AVAILABLE ON PORTING
R.V. PORT CONFIGURATION 'I' ONLY. RELIEF VALVE SETTING
90-420 PSIG BASED ON OUTLET PRESSURE OPTION.
J NOT AVAILABLE FOR 500 PSIG OUTLET.

Viton® & Kalrez® are registered trademarks of E.I.duPont de Nemours and Company. D/C: 182707
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 64
hes
Min 2550
r e g u l at SINGLE STAGE SERIES
USA
PREMIER INDUSTRIES HIGH SENSITIVITY
DIAPHRAGM SENSED
neapolis M i n n e s o ta Pressure Reducing Regulators

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 2550 Series regulators are single stage, • Large stainless steel diaphragm for increased
sensitivity and reduced droop
increased sensitivity, diaphragm sensed, pressure
• ± 1% of outlet pressure range
reducing regulators, designed for inlet pressures up • Stainless steel diaphragm minimizes inboard

to 3000 psig (206.8 bar), and Cv 0.08 or 0.2. ey di usion of air into the regulator
• Flow capacity (Cv): 0.08 or 0.2
are used to regulate a broad range of non-corrosive • Optional panel mounting nuts
• Non-venting
and corrosive media (based on materials of . • Economical pricing
construction). • Machined bar stock body eliminates porosity

found in castings

e Premier 2550 Series pressure reducing regulator’s design is remarkably exible. D/C: 181707
Contact Premier Industries for a custom 2550 Series regulator to meet your exact needs.

Page 65

ors, valves, and Torc
hes
Min
2550 SINGLE STAGE r e g u l at
SERIES USA
HIGH SENSITIVITY PREMIER INDUSTRIES
DIAPHRAGM SENSED
Pressure Reducing Regulators neapolis M i n n e s o ta

S P E C I F I C AT I O N S OUTLET GAUGE 0 XXX 0 3000
(OPTIONAL) 55°
• MAXIMUM INLET PRESSURE: 3000 PSIG (206.8 bar) I NC R E AS E
• CONTROL PRESSURE RANGES: 55° IN
1/4-18 NPT
• 0-10 PSIG (0 - 0.69 bar) OUT
• 0-25 PSIG (0 - 1.72 bar) 1/4-18 NPT IN
• 0-50 PSIG (0 - 3.45 bar) 1/4-18 NPT
• 0-100 PSIG (0 - 6.89 bar) OUT +-
• 0-150 PSIG (0 - 10.34 bar) 1/4-18 NPT
• 0-250 PSIG (0 - 17.24 bar) E DE C R E AS

• FLOW (Cv): 0.08 (standard) or 0.2

MATERIALS OF CONSTRUCTION Ø2.50

• BODY: Ø1.75
• 316 Stainless Steel
• SAE 360 Brass/Bright Dip PANEL MOUNTING NUT
• SAE 360 Brass/Nickel Plated (OPTIONAL)
• 6061-T6 Aluminum/Clear Anodized
USE Ø1 15/32 in. (1.47 in.)
• BONNET: PANEL CUT-OUT
• SAE 360 Brass/Nickel Plated
• 6061-T6 Aluminum/Clear Anodized 5.2

• DIAPHRAGM: A Ø2.0 .75
• 316 Stainless Steel
• Neoprene .875 A

• DIAPHRAGM SEAL: #10-32 X .25 DP IN
• Te on® 2 HOLES

• MAIN VALVE SEAT: OUT
• Te on®

PORTING

• STANDARD INLET:
• 1/4-18 FNPT
• Contact factory for other options

• STANDARD OUTLET:
• 1/4-18 FNPT
• Contact factory for other options

OPTIONS OUT IN

• Gauges (optional) 2” diameter VIEW A-A
• Private Label
• Panel Mounting Nut MOUNTING HOLES

(Part number: 50-11487 shown with standard porting)

® is a registered trademark of E.I.duPont de Nemours and Company D/C: 181707

ors, valves, and Torc Page 66
hes
Min 2550
regulat SINGLE STAGE SERIES
USA
PREMIER INDUSTRIES HIGH SENSITIVITY
DIAPHRAGM SENSED
neapolis M i n n e s ota Pressure Reducing Regulators

PART # -1 2 3 4 5 6 7
50-11487 -

1 BODY MATERIAL 4 GAUGES 6 PORTING 7 MAIN VALVE
OPTIONS Cv
& FINISH

2 316 Stainless Steel, Blank no gauges Blank Blank Cv 0.08
cleaned per spec #515 (standard) (standard)
(Standard)
3 6061-T6 Aluminum, 2” diameter, inlet Z Cv 0.20
Clear Anodized A
A only, stainless steel
5 SAE 360 Brass, B
Nickel Plated wetted gauge
2” diameter, outlet
8 SAE 360 Brass, C
Bright Dip B only, stainless

2 DIAPHRAGM steel wetted gauges D
MATERIAL 2” diameter, inlet

Blank 316 Stainless Steel C & outlet, stainless E
Diaphragm F
steel wetted gauges
N Neoprene diaphragm 2” diameter, inlet

3 OUTLET PRESSURE D only, brass
(outlet gauge range, if supplied)
wetted gauges G
2” diameter, outlet
0 0 - 10 PSIG / 0 - 0.69 bar
(per application) E only, brass
H
wetted gauges
2” diameter, inlet

F & outlet, brass

wetted gauges
2” diameter, outlet

H only, brass wetted/

chrome plated gauges
2” diameter inlet

J & outlet brass wetted/

chrome plated gauges

1 0 - 25 PSIG / 0 - 1.72 bar 5 PANEL MOUNTING
(0-60 PSIG gauge) NUT (optional)
I
2 0 - 50 PSIG / 0 - 3.45 bar 5 Mounting nut J
(0-100 PSIG gauge)

3 0 - 100 PSIG / 0 - 6.89 bar 8 No nut (standard)
(0-160 PSIG gauge)
K

4 0 - 150 PSIG / 0 - 10.34 bar
(0-200 PSIG gauge)

L

5 0 - 250 PSIG / 0 - 17.24 bar
(0-400 PSIG gauge)

Contact factory for material certi cations. Fees may apply. D/C: 181707

ors, valves, and Torc Page 67
hes
Min 2600
r e g u l at SINGLE STAGE SERIES
USA
PREMIER INDUSTRIES PISTON SENSED
Pressure Reducing Regulators

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

The Premier 2600 Series pressure reducing • Optional pressure relief valve
regulators are single stage, piston sensed, general • Stainless steel piston/piston housing
purpose cylinder and line regulators. Premier 2600 • 3500 PSIG (241.32 bar) max inlet pressure
Series regulators feature a max inlet pressure of • Control pressure up to 2500 PSIG (172.37 bar)
3500 PSIG (241.32 bar), control pressures up to • Cv 0.08, or 0.20
2500 PSIG (172.37 bar), and Cv 0.08, or 0.20. • Optional integral shut off valve
Models are available for both corrosive and • Compact size
non-corrosive service featuring a 316 stainless • Non-venting
steel piston/piston housing, and a variety of • Machined bar stock body, bonnet, and piston
optional bonnet, body, & seal materials.
eliminates porosity found in castings
• Economical pricing

e Premier 2600 Series pressure reducing regulator’s design is remarkably exible. D/C: 180105
Contact Premier Industries for a custom 2600 Series regulator to meet your exact needs.

Page 68

ors, valves, and Torc
hes
Min
2600 SINGLE STAGE r e g u l at
SERIES USA
PISTON SENSED PREMIER INDUSTRIES
Pressure Reducing Regulators
neapolis M i n n e s o ta

S P E C I F I C AT I O N S 55° OUT 70° GAUGES
(TYP “A” (TYP “A” (OPTIONAL)
• MAXIMUM INLET PRESSURE: 3500 PSIG (241.32 bar) AND “B”) AND “B”)
• CONTROL PRESSURE RANGES: IN
E- INCREASE +D (Ø2.0)
• 0-200 PSIG (0 - 13.79 bar)
• 0-250 PSIG (0 - 17.24 bar) PREMIER IN
• 0-1000 PSIG (0 - 68.95 bar) INDUSTRIES
• 0-1500 PSIG (0 - 103.42 bar) 5.62
• 0-2000 PSIG (0 - 137.9 bar)
• 0-2500 PSIG (0 - 172.37 bar) .75
• FLOW (Cv): 0.08, 0.20 1.37

(0.30 available, see part # 50-11853) .875

MATERIALS OF CONSTRUCTION OUT ECREAS
Ø2.0
• BODY OPTIONS:
• 316 Stainless Steel Ø1.75
• 303 Stainless Steel
• SAE 360 Brass/Nickel Plated PANEL MOUNTING
• SAE 360 Brass/Bright Dip NUT (OPTIONAL)
• 6061-T6 Aluminum/Clear Anodized USE 1.50/1.45 PANEL
CUT-OUT
• BONNET OPTIONS:
• SAE 360 Brass/Nickel Plated 1 7/16-20 UN
• 6061-T6 Aluminum/Nickel Plated MOUNTING THREADS

• PISTON/PISTON HOUSING: 1/8” NPT
• 316 Stainless Steel RANDOM
ORIENTATION
• MAIN VALVE CARTRIDGE SEAL:
• PTFE

• O-RING OPTIONS:
• Viton®
• Buna-n
• Neoprene
• EPDM

• VALVE SEAT: KEL-F 81
• GAUGE OPTIONS: (Optional)

• 316 Stainless Steel
• SAE 360 Brass/Nickel Plated

PORTING

• INLET:
• 1/4-18 NPT

• OUTLET:
• 1/4-18 NPT

OPTIONS MOUNTING HOLES
10-32 UNF-2B
• Panel mounting nut (6061-T6 Aluminnum/Anodized) 2X
• Relief valve
• Private label (Part number shown above: 50-11628)
• Purge block
• Cv 0.30 (Part Number: 50-11853)
• Venting (See 2660 Series)

Viton® is a registered trademark of E.I.duPont de Nemours and Company D/C: 183101

ors, valves, and Torc Page 69
hes
Min 2600
r e g u l at SINGLE STAGE SERIES
USA
PREMIER INDUSTRIES PISTON SENSED
Pressure Reducing Regulators

neapolis M i n n e s o ta

PART # -1 2 3 4 5 6 7 8
50-11628 -

1 BODY MATERIAL 3 OUTLET PRESSURE 6 PANEL MOUNTING
NUT (optional)
& FINISH

1 316 Stainless Steel, 1 0-1000 PSIG 0 No nut
cleaned per spec #515 (0-68.9 Bar)

2 303 Stainless Steel, 2 0-1500 PSIG 1 Mounting nut
cleaned per spec #515 (0-103.4 Bar)

3 SAE 360 Brass, 3 0-2000 PSIG 7 PORTING
Nickel Plated CONFIGURATIONS
(0-137.9 Bar)

4 SAE 360 Brass, 4 0-2500 PSIG A
Bright Dip
(0-172.4 Bar)

5 6061-T6 Aluminum, 5 0-200 PSIG B
Clear Anodized (0-13.8 Bar)

2 O-RING 6 0-250 PSIG 8 MOUNTING HOLES
SEALS (0-17.24 Bar) (Standard)

1 Viton® 4 MAIN VALVE 0 None
Cv

2 Buna-n 1 Cv 0.08 1 10-32 UNF-2B (2X)

3 Neoprene 2 Cv 0.2

4 EPDM 5 GAUGES
(optional)

0 No gauges

1 2” diameter inlet
& outlet gauges

Viton® is a registered trademark of E.I.duPont de Nemours and Company D/C: 182003
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 70
hes
Min 2610
r e g u l at SINGLE STAGE SERIES
USA
PREMIER INDUSTRIES STABLE SET PRESSURE
PISTON SENSED
neapolis M i n n e s o ta Pressure Reducing Regulators

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

The Premier 2610 Series single stage regulators • Reduced decaying inlet characteristic
are equipped with new patent pending technology • 3750 PSIG (258.55 bar) max inlet pressure
that enables increased stability in delivery pressure • Outlet pressures up to 2500 PSIG (172.37 bar)
and a significantly reduced decaying inlet • Cv 0.20
characteristic in a single stage. Premier 2610 • Compact size
Series single stage, piston sensed, pressure • Non-venting
reducing regulators feature a max inlet pressure of • Machined bar stock body, bonnet, and piston
3750 PSIG (258.55 bar), outlet pressures up to
2500 PSIG (172.37 bar), and Cv 0.20. Premier eliminates porosity found in castings
2610 Series regulators are well suited for • Economical pricing
applications with high outlet pressures from a
compressed gas source. Models are available for
both corrosive and non-corrosive service featuring
a variety of body, & seal options.

e Premier 2610 Series pressure reducing regulator’s design is remarkably exible. D/C: 180104
Contact Premier Industries for a custom 2610 Series regulator to meet your exact needs.

Page 71

ors, valves, and Torc
hes
Min
2610 SINGLE STAGE r e g u l at
SERIES USA
STABLE SET PRESSURE PREMIER INDUSTRIES
PISTON SENSED
Pressure Reducing Regulators neapolis M i n n e s o ta

S P E C I F I C AT I O N S (PANEL MOUNT 1.97
OPTION ONLY)
• MAXIMUM INLET PRESSURE: 3750 PSIG (258.55 bar) USE Ø 1.50/1.45
• CONTROL PRESSURE RANGES: PANEL CUT-OUT

• 0-250 PSIG (0 - 17.24 bar) 5.26
• 0-500 PSIG (0 - 34.47 bar)
• 0-1000 PSIG (0 - 68.95 bar) GAUGES (OPTIONAL)
• 0-1500 PSIG (0 - 103.42 bar) 2.0 FACE
• 0-2500 PSIG (0 - 172.37 bar) 70°
• FLOW (Cv): 0.2
OUT IN
MATERIALS OF CONSTRUCTION
.625
• BODY OPTIONS: 1.25
• 316 Stainless Steel
• 303 Stainless Steel .50
• 6061-T6 Aluminum/Clear Anodized TYP
PORTS
• BONNET:
• 6061-T6 Aluminum/Nickel Plated MOUNTING HOLES
10-32 UNF-2B
• PISTON/PISTON HOUSING: .25, 2X
• 316 Stainless Steel
• 303 Stainless Steel (Part number shown above: 50-12482)

• SEALS:
• Viton®
• EPDM
• Neoprene
• Nitrile

• VALVE SEAT: PCTFE
• OTHER WETTED COMPONENTS:

• 300 series stainless steel wetted components
• All 316 stainless steel wetted components (316 S.S. body)
• GAUGE OPTIONS: (Optional)
• 300 series stainless steel wetted components
• 316 stainless steel wetted components (316 S.S. body)

PORTING

• INLET:
• 1/4-18 FNPT
• 3/8-18 FNPT

• OUTLET:
• 1/4-18 FNPT
• 3/8-18 FNPT

OPTIONS

• Panel mounting nut
• Private label

Viton® is a registered trademarks of E.I.duPont de Nemours and Company D/C: 172012

ors, valves, and Torc Page 72
hes
Min 2610
r e g u l at SINGLE STAGE SERIES
USA
PREMIER INDUSTRIES STABLE SET PRESSURE
PISTON SENSED
neapolis M i n n e s o ta Pressure Reducing Regulators

PART # -1 2 -3 4 -5 6-7
50-12482 ----

1 BODY MATERIAL 4 O-RING 7 MOUNTING
SEALS OPTIONS
& FINISH

1 6061-T6 Aluminum, 1 Nitrile 1 Bottom mount only
Nickel Plated

2 303 Stainless Steel, 2 Viton® 2 Panel mount &
cleaned per spec #515 bottom mount

3 316 Stainless Steel, 3 EPDM
cleaned per spec #515

2 PORTING 4 Neoprene
CONFIGURATIONS

A 1/4 FNPT ports 5 OUTLET PRESSURE
(outlet gauge range, if supplied)

B 1/4 FNPT ports 1 0-250 PSIG / 0-17.24 bar
(0-400 psig gauge)

C 1/4 FNPT ports (red) 2 0-500 PSIG / 0-34.47 bar
3/8 FNPT ports (blue) (0-1000 psig gauge)

D 3/8 FNPT ports 3 0-1000 PSIG / 0-68.95 bar

(0-1500 psig gauge)

3 MAIN VALVE SEAT 4 0-1500 PSIG / 0-103.42 bar

(0-3000 psig gauge)

1 PCTFE 5 0-2500 PSIG / 0-172.37 bar
(0-3000 psig gauge)

GAUGES

6 (available with ‘A’ & ‘C’

porting con gurations)

1 No gauges

2 Include gauges

Viton® is a registered trademark of E.I.duPont de Nemours and Company D/C: 160510
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 73
hes
Min 2660
r e g u l at SINGLE STAGE SERIES
USA
PREMIER INDUSTRIES PISTON SENSED
SELF-VENTING
neapolis M i n n e s o ta Pressure Reducing Regulators

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

The Premier 2660 Series pressure reducing • Captured, self-venting, bonnet vent
regulators are single stage, piston sensed, • Stainless steel piston/piston housing
self-venting, cylinder and line regulators. Premier • 3500 PSIG (241.32 bar) max inlet pressure
2660 Series regulators feature a max inlet pressure • Cv 0.08, or 0.20
of 3500 PSIG (241.32 bar), control pressures up • Machined bar stock body, bonnet, and piston
to 1000 PSIG (68.95 bar), and Cv 0.08, or 0.20.
The self venting hole in the bonnet can be eliminates porosity found in castings
captured for use with toxic/corrosive media. • Economical pricing

e Premier 2660 Series pressure reducing regulator’s design is remarkably exible. D/C: 162309
Contact Premier Industries for a custom 2660 Series regulator to meet your exact needs.

Page 74

ors, valves, and Torc
hes
Min
2660 SINGLE STAGE r e g u l at
SERIES USA
PISTON SENSED PREMIER INDUSTRIES
SELF-VENTING
Pressure Reducing Regulators neapolis M i n n e s o ta

S P E C I F I C AT I O N S

• MAXIMUM INLET PRESSURE: 3500 PSIG (241.32 bar) VENTING HOLE,
1/8" FNPT CAPTURE
• CONTROL PRESSURE RANGES: PORT, RANDOM
ORIENTATION ON
• 0-25 PSIG (0 - 1.72 bar)
5.6 MAX
• 0-50 PSIG (0 - 3.45 bar) (5.4 MAX WITHOUT
MOUNTING HOLES)
• 0-100 PSIG (0 - 6.89 bar)

• 0-250 PSIG (0 - 17.24 bar)

• 0-500 PSIG (0 - 34.47 bar)

• 0-600 PSIG (0 - 41.36 bar) .75 PORT CL
• 0-1000 PSIG (0 - 68.95 bar) (.5 WITHOUT
• FLOW (Cv): 0.08, 0.20
MOUNTING
HOLES)

MATERIALS OF CONSTRUCTION GAUGES, 2.0 FACE
(OPTIONAL)
• BODY OPTIONS:
• 303 Stainless Steel 70°
• SAE 360 Brass/Nickel Plated
55°OUT IN
• BONNET (NON-WETTED): OUT IN
• SAE 360 Brass/Nickel Plated
CONFIGURATION PANEL MOUNTING NUT
• PISTON/PISTON HOUSING: 50-12539-2X-XX-11-11 (OPTIONAL)
• 303 Stainless Steel USE 1.53/1.50 PANEL CUT-OUT
SHOWN
• MAIN VALVE SEAT: PCTFE
• MAIN VALVE CARTRIDGE SEAL:

• PTFE
• O-RING OPTIONS:

• Viton®
• Contact factory for other options
• VENT VALVE/VENT SEAT RETAINER:
• 303 Stainless Steel

PORTING .875

• INLET:
• 1/4” FNPT

• OUTLET:
• 1/4” FNPT

• VENTING HOLE:
• 1/8” FNPT

OPTIONS MOUNTING HOLES
(OPTIONAL)
• Panel mounting nut (6061-T6 Aluminum/Nickel Plated)
10-32 UNF - 2B .37
• Gauges 2X
• Mounting holes
• Private label (Part number shown above: 50-12539)

Viton® is a registered trademark of E.I.duPont de Nemours and Company D/C: 160510

Page 75

ors, valves, and Torc
hes
Min
2660 SINGLE STAGE r e g u l at
SERIES USA
PISTON SENSED PREMIER INDUSTRIES
SELF-VENTING
Pressure Reducing Regulators neapolis M i n n e s o ta

PART # -1 2 -3 4 -5 6-7 8
50-12539 ----

1 BODY MATERIAL 4 MAIN VALVE 8 MOUNTING HOLES
Cv (optional)
& FINISH

2 303 Stainless Steel, 1 Cv 0.08 0 None
cleaned per spec #515

3 SAE 360 Brass, 2 Cv 0.20 1 10-32 UNF-2B (2X)
Nickel Plated

2 O-RING 5 GAUGES
SEALS (optional)

1 Viton® 0 No gauges
3 OUTLET PRESSURE
1 Include gauges

0-25 PSIG 6 PANEL MOUNTING
(0-1.72 Bar) NUT (optional)
1

2 0-50 PSIG 0 No nut
(0-3.45 Bar)

0-100 PSIG 1 Include mounting nut
(0-6.89 Bar)
3

4 0-250 PSIG 7 PORTING
(0-17.24 Bar) CONFIGURATIONS

5 0-500 PSIG 1 (‘C’ con guration
(0-34.47 Bar)
1/4” FNPT, 4X)
6 0-600 PSIG
(0-41.36 Bar) 2 (‘S’ con guration

1/4” FNPT, 2X)

9 0-1000 PSIG
(0-68.95 Bar)

Viton® is a registered trademark of E.I.duPont de Nemours and Company D/C: 170512
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 76
hes
Min 2700
regulat FIXED FLOW SERIES
USA
PREMIER INDUSTRIES PISTON SENSED
Pressure Reducing Regulators

neapolis Minnesota

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Compact, piston sensed, fixed flow, pressure • Compact size
reducing regulators used for calibration gases and • Factory preset flow settings from
industrial hygiene monitors. Premier 2700 Series
regulators are available with preset flow settings 0.25 liters/min to 9.0 liters/min
from 0.25 LPM to 9.0 LPM; they are offered in a • Wide variety of shut-off valve options
wide variety of materials and configurations, • 3000 PSIG (206.84 bar) max inlet
enabling them to regulate a broad range of media.
Flows are set using a unique integrated flow (dependent upon conf iguration)
adjustment valve prior to shipment. Dependent • Multiple porting options
upon the configuration of the regulator, Premier • Models are available for both corrosive and
2700 Series regulators are designed to handle
inlet pressures up to 3000 PSIG (206.84 bar). non-corrosive service in a variety of materials
• Machined bar stock body, and bonnet eliminates

porosity found in castings
• Numerous optional features and configurations

are available.
• Economical pricing

e Premier 2700 Series pressure reducing regulator’s design is remarkably exible. D/C: 150708
Contact Premier Industries for a custom 2700 Series regulator to meet your exact needs.

valves, and Page 77

ors, Torc

hes
Min
FIXED FLOW regulat
USA
2700 PISTON SENSED PREMIER INDUSTRIES
SERIES Pressure Reducing Regulators
neapolis Minnesota

S P E C I F I C AT I O N S PORTING

• MAXIMUM INLET PRESSURE: 3000 PSIG (206.84 bar) • INLET PORTING:
(dependent upon conf iguration) • C10 (5/8-18 UNF)
• 1/8" FNPT
• STANDARD PRESET CONTROL PRESSURE: • 1/8" MNPT,
• 40-60 PSIG (2.76 - 4.14 bar) • 1/4" FNPT
• Other preset control pressures optional • 1/4" MNPT
• All CGA Connections Available:
• LEAK RATE: Bubble Tight – CGA 165, 180, 320, 510, 580, 600, etc.
• SHUT OFF VALVE OPTIONS: (see page 3)
• OUTLET PORTING:
• None • 3/16" Hose Barb
• Rotary/Multi-turn • 1/4" hose barb
• Bayonet/Toggle • 1/8" FNPT
• Slide valve • 1/8" MNPT
• Trigger • 1/4" FNPT
• Push Button • 1/4" MNPT
• Solenoid
• FLOW (Cv): Preset to customer specifications from

0.25-9.0 LPM (at factory or inventory location)

MATERIALS OF CONSTRUCTION 3/16" HOSE BARB 3.6

• BODY OPTIONS: PREMIER INDUSTRIES
• SAE 360 Brass PART#50-10454-XX
• SAE 360 Brass, Electroless Nickel Plated INLET:XXXX PSIG MAX
• 303 Stainles Steel FLOW: X.X SLPM
• 316 Stainless Steel
• 6061-T6 Aluminum, Clear Anodized C10 INLET 0 XXXX
CONNECTION
• BONNET OPTIONS:
• 6061-T6 Aluminum, Clear Anodized Ø1.18
• SAE 360 Brass
• SAE 360 Brass, Electroless Nickel Plated

• PISTON:
• SAE 360 Brass
• 303 Stainles Steel
• 316 Stainless
• 6061-T6 Aluminum, Clear Anodized

• PISTON SEALS:
• Viton®
• All elastomers available

• VALVE SEAT: Teflon®

OPTIONS 1.3
FLOW ADJUSTMENT THROUGH TOP
• Gauges (1/8 FNPT Porting): inlet, outlet, or both
• Yoke style CGA connection USING 1/16" HEX ALLEN WRENCH
• Inlet shut off/metering valve
• Relief valve (Part Number: 50-10454 shown above)
• Seat and sealing materials
• Anodized colors for aluminum bodies and bonnets
• Private label

Te on® and Viton® is a registered trademark of E.I.duPont de Nemours and Company D/C: 150708

ors, valves, and Torc Page 78
hes
Min 2700
r e g u l at FIXED FLOW SERIES
USA
PREMIER INDUSTRIES PISTON SENSED
Pressure Reducing Regulators

neapolis M i n n e s o ta

PREMIER FIXED FLOW REGULATOR ST YLES

ROTARY VALV E TOGGLE ST YLE VALVE SLIDE VALVE
3/16” 3/16”
hose barb hose barb 1/8”
outlet outlet hose barb
outlet

C10 inlet C10 inlet C10 inlet

Part #: 50-10454 shown above Part #: 50-10482 shown above Part #: 50-10809 shown above
PUSH BU T TON VALVE TRIGGER ST YLE VALVE YOKE STYLE CGA

1/8” 1/4” OD tube CGA 930
hose barb .03 ori ce inlet
outlet outlet

C10 inlet C10 inlet 1/8” FNPT
outlet
Part #: 50-10619 shown above Part #: 50-10554 shown above
TO GGLE ST YLE VALVE Part #: 50-12202 shown above
SOLENOID OUTLET
1/8” MNPT CONTROL PUSH CONNECT
outlet tube tting

C10 inlet 1/8” FNPT w/
3/16” hose barb
outlet

CGA 600 Part #: 50-11742 shown above 1/4” female
inlet NPSM

Part #: 50-12085 shown above Part #: Contact for details

Contact factory for material certi cations. Fees may apply. D/C: 160510

ors, valves, and Torc Page 79
hes
Min 2701
regulat COMPACT, ECONOMICAL SERIES
USA FIXED FLOW
PREMIER INDUSTRIES
PISTON SENSED
neapolis Minnesota Pressure Reducing Regulators

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

The Premier Industries 2701 Series regulator is a • Compact size, economical pricing
fixed flow, piston sensed regulator, in a compact • Factory preset flow settings from
economical package; a reliable and cost-effective
solution for specialty gas, and transportable 0.1 liters/min to 4.0 liters/min
cylinder applications. Premier 2701 Series • Optional integrated shut-off valve
regulators are available with preset flow settings • 3000 PSIG (206.84 bar) max inlet
from 0.1 LPM to 4.0 LPM; they are offered in a
variety of materials and configurations for smooth (dependent upon conf iguration)
integration into your application. Flows are set • Multiple porting options
using a unique integrated flow adjustment valve • Suited for calibration gases & industrial hygiene
prior to shipment. Dependent upon the
configuration of the regulator, Premier 2701 monitors
Series regulators are designed to handle inlet • Models are available for both corrosive and
pressures up to 3000 PSIG (206.84 bar).
non-corrosive service in a variety of materials
• Machined bar stock body, and bonnet eliminates

porosity found in castings

e Premier 2701 Series pressure reducing regulator’s design is remarkably exible. D/C: 172403
Contact Premier Industries for a custom 2701 Series regulator to meet your exact needs.

valves, and Page 80

ors, Torc

COMPACT, ECONOMICAL hes
FIXED FLOW Min
regulat
PISTON SENSED USA
2701 Pressure Reducing Regulators PREMIER INDUSTRIES
SERIES
neapolis Minnesota

S P E C I F I C AT I O N S OUTLET:
3/16" HOSE BARB
• MAXIMUM INLET PRESSURE: 50 15 PSIG
• 3000 PSIG (206.84 bar), 1/4” FNPT inlet
• 1500 PSIG (103.42 bar), C10 (5/8-18 unf ) inlet .740 2.4
• 500 PSIG (34.47 bar), CGA 600 inlet 2.2
OUTLET:
• STANDARD PRESET CONTROL PRESSURE: 3/16" HOSE BARB
• 40-80 psig (2.76 - 5.52 bar) 50 15 PSIG

• PRESET FLOW SETTING: INLET:
• Preset to customer specifications from 0.1-4.0 SLPM 1/4 FNPT
(at factory or inventory location) 3000 PSIG MAX
INLET:
• FLOW (Cv): 0.005 max C10
• WEIGHT: 0.35 lb./0.16 kg 1000 PSIG MAX

(SAE 360 brass, C10 w/ rotary shut-off )

MATERIALS OF CONSTRUCTION (P/N 50-12641-21XX shown above (P/N 50-12641-11XX shown above
with C10 inlet) with 1/4” FNPT inlet)
• PROCESS WETTED MATERIALS:
• SAE 360 Brass OUTLET:
• SAE 360 Brass, Nickel Plated 3/16" HOSE BARB
• 316 Stainless Steel 50 15 PSIG
• 303 Stainless Steel
• 6061-T6 Aluminum, Clear Anodized 2.9 OUTLET: 2.9
3/16" HOSE BARB
• O-RING MATERIAL OPTIONS: 50 15 PSIG
• Buna-N
• Viton® INLET
• EPDM SHUT-OFF
• Neoprene VALVE
• Other elastomers available upon request
.75
• VALVE SEAT: PTFE
.41 INLET:
PORTING
.78 C10
• INLET PORTING: 1000 PSIG MAX
• C10 (5/8-18 UNF)
• 1/4" FNPT (P/N 50-12640-21XX shown above (P/N 50-12640-11XX shown above
• 1/8” FNPT
• Compatible CGA connections available upon request: with C10 inlet) with 1/4” FNPT inlet)
– CGA 165, 180, 320, 510, 580, 600, etc.
OUTLET: .740
• OUTLET PORTING: 3/16" HOSE BARB (STANDARD) INLET
• 3/16" Hose Barb 50 15 PSIG GAUGE:
• 1/4" Hose Barb 600 PSIG
• 1/4", 1/8” FNPT
• 1/4", 1/8” MNPT .750 2.8

OPTIONS .72 1.18
1.9 2.0
• Gauges, gauge internals equivalent to process wetted 2.2
materials
(P/N 50-12727 shown above with CGA 600 inlet)
• Integrated shut-off valve
• Private label

Viton® is a registered trademark of E.I.duPont de Nemours and Company D/C: 182206

ors, valves, and Torc Page 81
hes
Min 2701
regulat COMPACT, ECONOMICAL SERIES
USA FIXED FLOW
PREMIER INDUSTRIES
PISTON SENSED
neapolis Minnesota Pressure Reducing Regulators

BASIC CONFIGURATION W/OU T GAUGE OR SHU T-OFF
(1/4” FNPT or C10 INLET)

PART # - 1 2 3 4 - 5.6
50-12641 --

1 REGULATOR 4 O-RING
MATERIALS
INLET

1 1/4” FNPT 1 BUNA-N
(3000 psig max / 206.84 bar max)

2 C10 2 VITON®
(1000 psig max / 68.95 bar max)

2 REGULATOR OUTLET 3 EPDM

1 3/16” hose barb 4 NEOPRENE

Other outlets available upon request Other elastomers available upon request
(see page 2)

3 PROCESS WETTED 5.6 PRESET FLOW
MATERIALS SETTING

1 SAE 360 Brass, Nickel Plated Specify ow setting in slpm. nitrogen gas
(0.1-4.0 slpm range, 0.1 slpm resolution)

2 SAE 360 Brass, Bright Dipped

3 303 Stainless Steel

4 316 Stainless Steel

5 6061-T6 Aluminum, Clear Anodized

Viton® is a registered trademark of E.I.duPont de Nemours and Company D/C: 182206
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 82
hes
Min 2701
regulat COMPACT, ECONOMICAL SERIES
USA FIXED FLOW
PREMIER INDUSTRIES
PISTON SENSED
neapolis Minnesota Pressure Reducing Regulators

INTEGRATED GAUGE & SHU T-OFF VALVE
(CGA 600 INLET)

PART # - 1 2 3 - 4.5
50-12727 --

1 REGULATOR OUTLET 3 O-RING
MATERIALS

1 3/16” hose barb 1 BUNA-N

Other outlets available upon request 2 VITON®
(see page 2)

2 PROCESS WETTED 3 EPDM
MATERIALS

1 SAE 360 Brass, Nickel Plated 4 NEOPRENE

2 SAE 360 Brass, Bright Dipped Other elastomers available upon request

3 303 Stainless Steel 4.5 PRESET FLOW
SETTING

4 316 Stainless Steel Specify ow setting in slpm. nitrogen gas
(0.1-4.0 slpm range, 0.1 slpm resolution)

5 6061-T6 Aluminum, Clear Anodized

Te on® and Viton® are registered trademarks of E.I.duPont de Nemours and Company D/C: 182206

ors, valves, and Torc Page 83
hes
Min 2701
regulat COMPACT, ECONOMICAL SERIES
USA FIXED FLOW
PREMIER INDUSTRIES
PISTON SENSED
neapolis Minnesota Pressure Reducing Regulators

INTEGRATED GAUGE & SHU T-OFF VALVE
(1/4” FNPT or C10 INLET)

PART # - 1 2 3 4 - 5.6
50-12640 --

1 REGULATOR 4 O-RING
MATERIALS
INLET

1 1/4” FNPT 1 BUNA-N
(3000 psig max / 206.84 bar max)

2 C10 2 VITON®
(1000 psig max / 68.95 bar max)

2 REGULATOR OUTLET 3 EPDM

1 3/16” hose barb 4 NEOPRENE

Other outlets available upon request Other elastomers available upon request
(see page 2)

3 PROCESS WETTED 5.6 PRESET FLOW
MATERIALS SETTING

1 SAE 360 Brass, Nickel Plated Specify ow setting in slpm. nitrogen gas
(0.1-4.0 slpm range, 0.1 slpm resolution)

2 SAE 360 Brass, Bright Dipped

3 303 Stainless Steel

4 316 Stainless Steel

5 6061-T6 Aluminum, Clear Anodized

Viton® is a registered trademark of E.I.duPont de Nemours and Company D/C: 170802
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 84
hes
Min 2780
regulat MICRO SERIES
USA
PREMIER INDUSTRIES PISTON SENSED
Pressure Reducing Regulators

neapolis Minnesota

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

2.42” 2.35” 1.688”

0.700”

(Part #: 50-11519) (Part #: 50-11095) (Part #: 50-11022) (Part #: 50-11398)

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Miniature, economical, piston-sensed, fixed flow, • Extremely compact & light-weight
pressure reducing regulators. Premier 2780 Series • Factory preset flow settings from 0.25 liters/min to
regulators are used where size, weight, and cost
are important. These light-weight, compact 7.0 liters/min or unrestricted
regulators feature a fixed flow rate that is factory • Max inlet pressure: 1500 PSIG (103.42 bar)
preset between 0.25 LPM - 9.0 LPM (or
unrestricted). The 2780 Series regulators shown (optional designs are available for higher pressures)
above are all aluminum, simple and dependable. • Machined bar stock body, and bonnet eliminates

porosity found in castings
• Numerous optional features are available.
• Economical pricing

e Premier 2780 Series pressure reducing regulator’s design is remarkably exible. D/C: 150708
Contact Premier Industries for a custom 2780 Series regulator to meet your exact needs.

Page 85

2780 MICRO
SERIES
PISTON SENSED
Pressure Reducing Regulators

S P E C I F I C AT I O N S PORTING

• MAXIMUM INLET PRESSURE: 1500 PSIG* (103.42 bar) • INLET PORTING OPTIONS:
* (Depending on inlet connection) • 1/8” NPT
• Optional designs up to 4500 PSIG (310.26 bar) • C10 (5/8-18 UNF)
• CGA 600
• STANDARD PRESET CONTROL PRESSURE: • #10-32 UNF (Female)
• 50/60 PSIG • Cartridge Mount
• Other preset control pressures optional
• OUTLET PORTING OPTIONS:
• FLOW (Cv): Factory preset Cv 0.25-7.0 LPM • 1/8” NPT
• LEAK RATE: Bubble Tight • 3/16" Hose Barb
• WEIGHT: ~ 0.05 - 0.10 lbs. • 1/4" hose barb

MATERIALS OF CONSTRUCTION • #10-32 UNF (Female)
• Cartridge Mount
• BODY OPTIONS:

• 6061-T6 Aluminum, Clear Anodized OPTIONS
• SAE 360 Brass
• SAE 360 Brass, Electroless Nickel Plated • Anodized Colors for Aluminum Bodies
• 303 Stainless Steel and Bonnets
• BONNET OPTIONS:
• Private Label

• 6061-T6 Aluminum, Clear Anodized

• SAE 360 Brass LABEL

• SAE 360 Brass, Electroless Nickel Plated .39
.95

• 303 Stainless Steel .865 PREMIER
• VALVE ASSEMBLY: PART NO
MAX. INL
• Body: SAE 360 Brass FLOW:
2.19
• Valve Stem: SAE 360 Brass (Nickel Plating optional) Ø1.19

• PISTON OPTIONS: #10 - 32 UNF W/ O- RING SEAL
1.97
• 6061-T6 Aluminum, Clear Anodized

• SAE 360 Brass

• 303 Stainless Steel

• PISTON SEALS:

• Viton® (Part Number 50-11080 shown above)
• Numerous other compounds available

• VALVE SEAT: Teflon®

Te on® and Viton® are registered trademarks of E.I.duPont de Nemours and Company D/C: 160510

Contact factory for material certifications. Fees may apply.

ors, valves, and Torc Page 86
hes
Min 2800N
r e g u l at HIGH FLOW SERIES
USA DIAPHRAGM SENSED
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 2800N Series regulators are high flow, • Significantly reduced supply pressure effect /
single stage, pressure reducing regulators with a increased stability in outlet pressure
balanced stem for increased outlet pressure
stability. These diaphragm sensed, high flow • Flow capacity (Cv): 1.0, 2.0
regulators are designed for inlet pressures up to • Neoprene diaphragm (fabric reinforced)
3000 PSIG (206.84 bar), and Cv 1.0 or 2.0. • Non-venting
Premier 2800N Series regulators are used to • Machined bar stock body eliminates porosity
regulate to a broad range of non corrosive and
corrosive media (based on materials of found in castings
construction). • Very competitive pricing

e Premier 2800N Series pressure reducing regulator’s design is remarkably exible. D/C: 180205
Contact Premier Industries for a custom 2800N Series regulator to meet your exact needs.

Page 87

ors, valves, and Torc
hes
Min
r e g u l at
USA
2800N HIGH FLOW PREMIER INDUSTRIES
SERIES DIAPHRAGM SENSED
Pressure Reducing Regulators neapolis M i n n e s o ta

S P E C I F I C AT I O N S 2.5 GAUGES SHOWN
( 2.0 GAUGES AND NO
• MAXIMUM INLET PRESSURE: 3000 PSIG (206.84 bar) GAUGE OPTIONS AVAIL.)
• CONTROL PRESSURE RANGES:
2.8
• 0-10 PSIG (0 - 0.69 bar) OPTIONAL RELIEF
• 0-15 PSIG (0 - 1.03 bar) VALVE SHOWN
• 0-40 PSIG (0 -2.76 bar)
• 0-100 PSIG (0 - 6.89 bar) 6
• 0-150 PSIG (0 - 10.34 bar)
• FLOW (Cv): 1.0, 2.0 (Part number 50-12056 shown above)

MATERIALS OF CONSTRUCTION PANEL MOUNTING NUTS
ORDER SEPARATLY
• BODY: P/N 50-11355
• SAE 360 Brass/Bright Dip
• SAE 360 Brass/Nickel Plated (OPTIONAL, 1X OR 2X)
• 6061-T6 Aluminum/Nickel Plated
• 303 Stainless Steel (Part number 50-12056-3X-X2-XX-02 shown above)

• BONNET: D/C: 171101
• 6061-T6 Aluminum/Nickel Plated

• DIAPHRAGM:
• Neoprene (fabric reinforced)

• MAIN VALVE SEAT:
• PCTFE

• RELIEF VALVE (OPTIONAL):
• Brass with silicone seal

PORTING

• INLET:
• 1/2-14 FNPT
• 1/4-18 FNPT

• OUTLET: (1 or 2 outlets)
• 1/2-14 FNPT
• 1/4-18 FNPT

OPTIONS

• Gauges
• Relief Valve
• Private Label
• Panel Mounting Nut(s) (1 or 2)

(P/N: 50-11355, order separately)

ors, valves, and Torc Page 88
hes
Min 2800N
r e g u l at HIGH FLOW SERIES
USA DIAPHRAGM SENSED
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PART # -1 2 -3 4 -5 6-7 8
50-12056 ----

1 BODY MATERIAL 5 OUTLET PRESSURE 8 HAND KNOB /
1 0-10 PSIG / 0-0.69 bar ACORN NUT (PRESET)
& FINISH 2 0-15 PSIG / 0-1.03 bar
3 0-40 PSIG / 0-2.76 bar
1 SAE 360 Brass, 4 0-100 PSIG / 0-6.89 bar 1 Hand knob
Bright Dip 5 0-150 PSIG / 0-10.34 bar

2 SAE 360 Brass, 2 Preset outlet **
Nickel Plated (tamper resistant acorn nut)

3 6061-T6 Aluminum,
Nickel Plated

4 303 Stainless Steel,
cleaned per spec #515

2 DIAPHRAGM / SEALS

1 Neoprene 6 MAIN VALVE Cv
3 MAIN VALVE SEAT 1 Cv 1.0

1 PCTFE 2 Cv 2.0

4 RELIEF VALVE / 7 GAUGES
PORTING 0 None
1 Ø 2.0”
1 60° TYP Relief valve included, 2 Ø 2.5”
2 60° TYP 1/4 FNPT ports (red)
3 1/2 FNPT ports (blue)
“I*” porting

No relief valve,
1/4 FNPT ports (red)
1/2 FNPT ports (blue)
“C” porting

No relief valve,
3/4 FNPT ports
“S” porting

**TAMPER RESISTANT ACORN NUT D/C: 171101

THE END USER IS RESPONSIBLE TO SPECIFY A PRESET OUTLET PRESSURE. IF AN OUTLET PRESSURE IS NOT SPECIFIED, THE
PRESSURE WILL BE LEFT UNSET. NEVER EXCEED THE MAXIMUM OUTLET PRESSURE SPECIFIED ON THE PART NUMBER.
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 89
hes
Min 2800S
r e g u l at HIGH FLOW SERIES
USA DIAPHRAGM SENSED
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 2800S Series single stage, high flow, • Stainless steel diaphragm minimizes off-gassing
diaphragm sensed, variable delivery pressure • Balanced stem for increased outlet pressure
regulators, are designed for inlet pressures up to
3000 PSIG (206.84 bar), and Cv 1.0. Premier stability
2800S Series regulators feature a stainless steel • Flow capacity (Cv): 1.0
diaphragm to minimize off-gassing, and a • Optional relief valve
balanced stem for increased outlet pressure • Optional panel mounting nut
stability. Available for use with a broad range of • Non-venting
non-corrosive and corrosive media (based on • Very competitive pricing
materials of construction). • Machined bar stock body eliminates porosity

found in castings

e Premier 2800S Series pressure reducing regulator’s design is remarkably exible.
Contact Premier Industries for a custom 2800S Series regulator to meet your exact needs.

D/C: 180105

Page 90

ors, valves, and Torc
hes
Min
2800S r e g u l at
SERIES USA
HIGH FLOW PREMIER INDUSTRIES
DIAPHRAGM SENSED
Pressure Reducing Regulators neapolis M i n n e s o ta

S P E C I F I C AT I O N S OPTIONS

• MAXIMUM INLET PRESSURE: 3000 PSIG (206.84 bar) • Gauges
• CONTROL PRESSURE RANGES: • Relief Valve
• Private Label
• 0-10 PSIG (0 - 0.69 bar) • Panel Mounting Nut
• 0-25 PSIG (0 - 1.72 bar)
• 0-50 PSIG (0 - 3.45 bar) Ø1.75
• 0-100 PSIG (0 - 6.89 bar)
• 0-150 PSIG (0 - 10.34 bar)

• FLOW (Cv): 1.0

MATERIALS OF CONSTRUCTION PPIANRRELMTE#TIE5:R0X-IXN1X1D4XU9SP3TS-XRIGXIES 5.9
OUTLET: XXX PSIG
• BODY:
• 316 Stainless Steel A Ø2.59 1.00
• SAE 360 Brass/Bright Dip
• SAE 360 Brass/Nickel Plated A
• 6061-T6 Aluminum/Clear Anodized
XXXX 0
• BONNET:
• SAE 360 Brass/Nickel Plated OUTLET GAUGE 0 60° XXXX INLET GAUGE
• 6061-T6 Aluminum/Nickel Plated (OPTIONAL) 60° OUT 60° (OPTIONAL)
• 6061-T6 Aluminum/Clear Anodized
1/4-18 NPT IN
• DIAPHRAGM: 1/4-18 NPT
• Neoprene (fabric reinforced)
• 316 Stainless Steel I NCRE ASE

• MAIN VALVE SEAT: OUT +- IN
• Vespel® 1/2-14 FNPT 1/2-14 FNPT
• PCTFE E DE CR E AS

PORTING 1/4-20 X .30 DP
2 HOLES
• STANDARD INLET:
• 1/2-14 FNPT OUT IN
1.375
• STANDARD OUTLET:
• 1/2-14 FNPT OUT IN

• OPTIONAL INLETS: VIEW A-A
• 1/4 FNPT MOUNTING HOLES
• 3/8 FNPT

• OPTIONAL OUTLETS:
• 1/4 FNPT
• 3/8 FNPT

(Part number: 50-11493 shown with standard porting)

Vespel® is a registered trademark of E.I.duPont de Nemours and Company D/C: 151008

ors, valves, and Torc Page 91
hes
Min 2800S
r e g u l at HIGH FLOW SERIES
USA DIAPHRAGM SENSED
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PART # -- 1 2 3 4 5
50-11493 -

1 BODY MATERIALS 3 GAUGES 5 PORTING
& FINISH (Optional) OPTIONS

2 316 Stainless Steel, Standard porting
Cleaned per spec #515
Blank none (standard) Blank 1/4 FNPT 1/4 FNPT

221/2 FNPT 1/2 FNPT

3 6061-T6 Aluminum, B 2” diameter outlet only,
Clear Anodized stainless steel wetted gauge

5 SAE 360 Brass, R 1/2 FNPT 1/2 FNPT
Nickel Plated
C 2” diameter inlet & outlet,
stainless steel wetted gauges
SAE 360 Brass,
8 Bright Dip 1/4 FNPT

E 2” diameter outlet only, S 3/8 FNPT 3/8 FNPT
SAE 360 brass wetted gauge
OUTLET PRESSURE
2 (Outlet gauge range if supplied)

F 2” diameter inlet & outlet, 1/4 FNPT 1/4 FNPT
SAE 360 brass wetted gauges
T 3/8 FNPT
0-10 psig / 0-0.69 bar 3/8 FNPT
(per application)
0 2” diameter outlet only,

1 0-25 psig / 0-1.72 bar H SAE 360 brass wetted/
(0-60 psig gauge)
chrome plated gauge
2” diameter inlet & outlet,

J SAE 360 brass wetted/

chrome plated gauges

2 0-50 psig / 0-3.45 bar 4 PANEL MOUNTING
(0-100 psig gauge) NUT (Optional)

3 0-100 psig / 0-6.89 bar 5 Mounting nut
(0-160 psig gauge)

4 0-150 psig / 0-10.34 bar 8 No nut (standard)
(0-400 psig gauge)

D/C: 161506

ors, valves, and Torc Page 92
hes
Min 2800P
r e g u l at HIGH FLOW SERIES
USA PISTON SENSED
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 2800P Series regulators are single stage • Significantly reduced supply pressure effect /
regulators with a balanced stem for increased increased stability in outlet pressure
outlet pressure stability. These piston sensed, high
flow regulators feature inlet pressures up to 3000 • High flow capacity (Cv): 2.0 or 1.0
PSIG (206.84 bar), and Cv 2.0 or 1.0. Premier • Piston sensed
2800P Series regulators are used to regulate to a • Non-venting
broad range of corrosive and non-corrosive media • Variety of materials available
(based on materials of construction). • Machined bar stock body eliminates porosity

found in castings
• Very competitive pricing

e Premier 2800P Series pressure reducing regulator’s design is remarkably exible. D/C: 180205
Contact Premier Industries for a custom 2800P Series regulator to meet your exact needs.

Page 93

ors, valves, and Torc
hes
Min
HIGH FLOW r e g u l at
PISTON SENSED USA
2800P Pressure Reducing Regulators PREMIER INDUSTRIES
SERIES
neapolis M i n n e s o ta

S P E C I F I C AT I O N S

• MAXIMUM INLET PRESSURE: 3000 PSIG (206.84 bar)
• CONTROL PRESSURE RANGES:
• 0-120 PSIG (0 - 8.27 bar)
• 0-125 PSIG (0 - 8.62 bar) 1 3/4-16 UN

• 0-150 PSIG (0 - 10.34 bar) PANEL MOUNTING DETAIL: .99
• 0-250 PSIG (0 - 17.24 bar) THREAD: 1 3/4-16 UN
• 0-350 PSIG (0 - 24.13 bar)
USE PANEL CUT-OUT: 1.82/1.78"

• 0-500 PSIG (0 - 34.47 bar)
• FLOW (Cv): 2.0 (standard) 1.0 optional

MATERIALS OF CONSTRUCTION 1.13 FOR 1/2 FNPT 5.85
AND SMALLER PORTS, 2.64
• BODY: 1.03 FOR 3/4 FNPT PORTS
• 6061-T6 Aluminum / Clear Anodized
• SAE 360 Brass / Nickel Plated 1/4 FNPT 1/4 FNPT
• 316 Stainless Steel INLET OUTLET

• BONNET: 70° 55°
• 6061-T6 Aluminum/Nickel Plated
(f inish to match wetted material f inish) INLET
• 303 Stainless Steel
• 316 Stainless Steel OUTLET

• PISTON: 1/4 FNPT 2.71
• 303 Stainless Steel INLET
• 316 Stainless Steel 1/4 FNPT
OUTLET
• MAIN VALVE SEAT:
• PEEK® (P/N: 50-12230 shown above)
• PCTFE 500 PSIG max outlet

• ELASTOMER SEALS:
• BUNA-N
• Viton®
• EPDM

• MAIN VALVE PARTS:
• 303 stainless steel and 316 stainless steel wetted alloys
(used in aluminum and brass body options)
• 316 stainless steel bonnet & 316 stainless steel wetted alloys
(used in 316 stainless steel body option)

1 3/4-16 UN

PORTING PANEL MOUNTING DETAIL: .99
THREAD: 1 3/4-16 UN 5.14
• INLET/OUTLET OPTIONS:
• 1/2” FNPT USE PANEL CUT-OUT: 1.82/1.78"
• 3/8” FNPT
• 3/4” FNPT

• GAUGES: 1/4-18 FNPT

OPTIONS 2.64

• Gauges (Part number 50-12231 shown above
• Adjustable hand knob, 500 PSIG max outlet (P/N: 50-12230) with tamper resistant acorn nut)
• Tamper resistant acorn nut, 500 PSIG max outlet (P/N: 50-12231)
• Relief valve 500 PSIG max outlet
• Private label
• Panel mounting nuts (1 or 2) P/N 50-11803

Vespel ® and Viton® are registered trademarks of E.I.duPont de Nemours and Company D/C: 172012
PEEK® is a registered trademark of Victrex PLC

ors, valves, and Torc Page 94
hes
Min 2800P
r e g u l at HIGH FLOW SERIES
USA PISTON SENSED
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

STANDARD HAND KNOB

PART # - 1 2 3 4 5 6 7 8 - MODS
50-12230 --

BODY & BONNET 4 OUTLET 7 PORTING MODS
PRESSURE CONFIGURATION
1 MATERIAL Cv 1.0
1 0-500 PSIG 1/4 FNPT
(Wetted Materials) (0 - 34.47 bar) L (Cv 2.0
A 1/2 FNPT 1/2 FNPT
6061-T6 Aluminum, standard)
Clear Anodize 2 0-125 PSIG 1/4 FNPT 6 port
D/C: 172507
1 (303 Stainless Steel & (0 - 8.62 bar)

316 Stainless Steel)

SAE 360 Brass, 1/4 FNPT

2 Nickel Plated 3 0-120 PSIG B 1/2 FNPT 1/2 FNPT
(0 - 8.27 bar)
(303 Stainless Steel & 4 port
316 Stainless Steel)
4 0-350 PSIG C 1/2 FNPT 1/2 FNPT
(0 - 24.13 bar)
2 port
316 Stainless Steel, 0-150 PSIG
Clean per spec #515 5 (0 - 10.34 bar) 1/4 FNPT

3 (316 Stainless Steel 0-250 PSIG D 3/8 FNPT 3/8 FNPT
(0 - 17.24 bar)
& Nitronic 60) 6

ELASTOMER 1/4 FNPT 6 port
SEALS
2 5 GAUGES 1/4 FNPT

E 3/8 FNPT 3/8 FNPT

1 Buna-n 4 port
2 Viton®
3 EPDM 1 None F 3/8 FNPT 3/8 FNPT
3 SEAT MATERIAL
2 Include gauges 2 port

Gauges not available on C & F 1/4 FNPT
porting con gurations, outlet
gauge only available on G & I G 3/4 FNPT 3/4 FNPT
porting con gurations.
1/4 FNPT 4 port

1/4 FNPT

1 PCTFE PANEL H 3/4 FNPT 3/4 FNPT
2 PEEK®
6 MOUNTING 4 port

NUT 1/4 FNPT

0 None I 1/2 FNPT 1/2 FNPT

1 1 mounting nut 1/4 FNPT 4 port

2 2 mounting nuts 8 MOUNTING
HOLES

PEEK® is a registered trademark of Victrex PLC 0 None
Viton® is a registered trademark of E.I.duPont de Nemours & Company
Contact Premier for mounting options
* All ports are 1/4” FNPT unless otherwise indicated on the porting
con guratons.
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 95
hes
Min 2800P
r e g u l at HIGH FLOW SERIES
USA PISTON SENSED
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PRESET OUTLET / ACORN NUT

PART # - 1 2 3 4 5 6 7 8 - MODS
50-12231 --

BODY & BONNET 4 OUTLET 7 PORTING MODS
PRESSURE CONFIGURATION
1 MATERIAL
1 0-500 PSIG 1/4 FNPT Preset outlet pressure
(Wetted Materials) (0 - 34.47 bar) (XXX)
A 1/2 FNPT 1/2 FNPT
6061-T6 Aluminum, E.G. 075 = 75 PSIG
Clear Anodize 2 0-125 PSIG 1/4 FNPT 6 port
** e end user is
1 (303 Stainless Steel & (0 - 8.62 bar) responsible to specify a
preset outlet pressure.
316 Stainless Steel) If an outlet pressure is
not speci ed, the
SAE 360 Brass, 1/4 FNPT pressure will be left
unset. Never exceed
2 Nickel Plated 3 0-120 PSIG B 1/2 FNPT 1/2 FNPT XXX the maximum outlet
(0 - 8.27 bar) pressure speci ed on
(303 Stainless Steel & 4 port the part number.
316 Stainless Steel)
4 0-350 PSIG C 1/2 FNPT 1/2 FNPT
(0 - 24.13 bar)
2 port
316 Stainless Steel, 0-150 PSIG
Clean per spec #515 5 (0 - 10.34 bar) 1/4 FNPT

3 (316 Stainless Steel 0-250 PSIG D 3/8 FNPT 3/8 FNPT
(0 - 17.24 bar)
& Nitronic 60) 6 (Cv 2.0
standard)
ELASTOMER 1/4 FNPT 6 port L Cv 1.0
SEALS
2 5 GAUGES 1/4 FNPT

E 3/8 FNPT 3/8 FNPT Separate multiple modi cations
with a dash
1 Buna-n 4 port e.g.
2 Viton® 125 psig preset outlet pressure w/
3 EPDM 1 None F 3/8 FNPT 3/8 FNPT Cv 1.0 = 125-L
3 SEAT MATERIAL 2 Include gauges
2 port
PANEL
1/4 FNPT
6 MOUNTING
G 3/4 FNPT 3/4 FNPT
NUT
1/4 FNPT 4 port
0 None 1/4 FNPT

1 PCTFE 1 1 mounting nut H 3/4 FNPT 3/4 FNPT
2 PEEK®
2 2 mounting nuts 4 port

1/4 FNPT

I 1/2 FNPT 1/2 FNPT

1/4 FNPT 4 port

8 MOUNTING
HOLES

PEEK® is a registered trademark of Victrex PLC 0 None
Viton® is a registered trademark of E.I.duPont de Nemours & Company
Contact factory for material certi cations. Fees may apply. Contact Premier for mounting options

D/C: 182003

ors, valves, and Torc Page 96
hes
Min 2800PDL
r e g u l at DOME LOADED SERIES
USA HIGH FLOW, PISTON SENSED
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 2800PDL Series regulators are single • Significantly reduced supply pressure effect /
stage, high flow, piston sensed regulators with a increased stability in outlet pressure
balanced stem for increased delivery pressure
stability. These piston sensed, high flow regulators • High flow capacity (Cv): 2.0
feature inlet pressures up to 3000 PSIG (206.84 • Piston sensed
bar), and Cv 2.0. Premier 2800PDL Series • 1:1 dome load (1000 PSIG / 68.95 bar MAX)
regulators feature a 1:1 dome load and max • 3000 PSIG max inlet
control pressure of 1000 PSIG (68.95 bar). They • Variety of materials available
are used to regulate to a broad range of corrosive • Non-venting
and non-corrosive media (based on materials of • Machined bar stock body eliminates porosity
construction).
found in castings
• Very competitive pricing

e Premier 2800PDL Series pressure reducing regulator’s design is remarkably exible. D/C: 162504
Contact Premier Industries for a custom 2800PDL Series regulator to meet your exact needs.

Page 97

ors, valves, and Torc
hes
Min
DOME LOADED r e g u l at
HIGH FLOW, PISTON SENSED USA
2800PDL Pressure Reducing Regulators PREMIER INDUSTRIES
SERIES
neapolis M i n n e s o ta

S P E C I F I C AT I O N S OPTIONS

• MAXIMUM INLET PRESSURE: 3000 PSIG (206.84 bar) • Panel Mounting Nut(s) (1 or 2) P/N 50-11803
• MAXIMUM CONTROL PRESSURE: 1000 PSIG (68.95 bar) • Gauges & mounting holes (contact Premier)
• DOME LOAD: 1:1, 1000 PSIG (68.95 bar) max • Private Label
• FLOW (Cv): 2.0

MATERIALS OF CONSTRUCTION

• BODY:

• 6061-T6 Aluminum / Clear Anodized PANEL MOUNTING DETAIL:
• 316 Stainless Steel THREAD: 1 3/4-16 UN
• SAE 360 Brass / Nickel Plated
USE PANEL CUT-OUT: 1.82/1.78"

• BONNET: .53
• 6061-T6 Aluminum / Clear Anodized

• 316 Stainless Steel 3.5

• SAE 360 Brass / Nickel Plated

• PISTON:

• 303 Stainless Steel

• 316 Stainless Steel 1.13
TYP PORTS
• MAIN VALVE SEAT:
2.64
• PCTFE

• PEEK®

• ELASTOMER SEALS:

• Nitrile

• Viton®

• EPDM 70° 1/4 FNPT
1/4 FNPT INLET
• MAIN VALVE PARTS: OUTLET 1/2 FNPT
INLET
• 300 series stainless steel

(used in aluminum and brass body options)

• 316 stainless steel & nitronic 60 55°

(used in 316 stainless steel body option)

• OPTIONAL PANEL MOUNTING NUT (non-wetted):

• 6061-T6 Aluminum/Nickel Plated 1/2 FNPT
OUTLET

PORTING 2.71 1/4 FNPT
1/4 FNPT INLET
• INLET OPtIONS: OUTLET
• 1/2” FNPT
• 3/8” FNPT (Part number 50-12278-3XX11A0 shown above)

• OUTLET:
• 1/2” FNPT
• 3/8” FNPT

• GAUGES:
• 1/4-18 FNPT

Viton® is a registered trademark of E.I.duPont de Nemours and Company D/C: 171012
PEEK® is a registered trademark of Victrex PLC

ors, valves, and Torc Page 98
hes
Min 2800PDL
r e g u l at DOME LOADED SERIES
USA HIGH FLOW, PISTON SENSED
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PART # -1 2 3 4 5 6 7
50-12278 -

1 BODY & BONNET 5 OPTIONAL PANEL 7 MOUNTING
MATERIAL & FINISH MOUNTING NUT(S) HOLES

1 6061-T6 Aluminum 0 None 0 None
Clear Anodize

2 316 Stainless Steel 1 1 mounting nut

Clean per spec #515

3 SAE 360 Brass 2 2 mounting nuts
Nickel Plated

2 ELASTOMER 6 PORTING
SEALS CONFIGURATION

1 Nitrile 1/4 FNPT
2 Viton®
3 EPDM A 1/2 FNPT 1/2 FNPT
3 SEAT MATERIAL
1/4 FNPT 6 port

1/4 FNPT

B 1/2 FNPT 1/2 FNPT

4 port

1 PCTFE C 1/2 FNPT 1/2 FNPT
4 GAUGES
2 port

1/4 FNPT

D 3/8 FNPT 3/8 FNPT

0 None 1/4 FNPT 6 port

1/4 FNPT

E 3/8 FNPT 3/8 FNPT

4 port

F 3/8 FNPT 3/8 FNPT

2 port

Viton® is a registered trademark of E.I.duPont de Nemours & Company D/C: 173101
PEEK® is a registered trademark of Victrex PLC
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 99
hes
Min 2860PDL
r e g u l at HIGH FLOW
USA PISTON SENSED SERIES
PREMIER INDUSTRIES CAPTURED VENTING
Pressure Reducing Regulators
neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 2860PDL Series regulators are captured • Captured venting
venting, single stage regulators with a balanced • Significantly reduced supply pressure effect /
stem for increased stability in delivery pressure /
significantly reduced supply pressure effect. These increased stability in outlet pressure
piston sensed, high flow regulators are rated for • High flow capacity (Cv): 2.0
inlet pressures up to 3000 PSIG (206.84 bar), and • Piston sensed
Cv 2.0. Premier 2860PDL Series regulators are • Variety of materials available
used to regulate to a broad range of corrosive and • Machined bar stock body eliminates porosity
non-corrosive media (based on materials of
construction). found in castings
• Very competitive pricing

e Premier 2860PDL Series pressure reducing regulator’s design is remarkably exible. D/C: 172010
Contact Premier Industries for a custom 2860PDL Series regulator to meet your exact needs.

Page 100

ors, valves, and Torc
hes
Min
HIGH FLOW r e g u l at
PISTON SENSED USA
2860PDL CAPTURED-VENTING PREMIER INDUSTRIES
Pressure Reducing Regulators
SERIES neapolis M i n n e s o ta

S P E C I F I C AT I O N S 1.13 INLET PORT
TYP PORTS (3000 PSIG MAX)
• MAXIMUM INLET PRESSURE: 3000 PSIG (206.8 bar)
• MAXIMUM OUTLET PRESSURE: 1500 PSIG (103.4 bar)
• MAXIMUM DOME LOAD: 1550 PSIG (106.9 bar)**
**An additional 10-40 psig dome load is required to maintain
1:1 outlet:dome ratio
• FLOW (Cv): 2.0

MATERIALS OF CONSTRUCTION 3.66

• BODY/BONNET/SENSOR OPTIONS: 2.71
• 6061-T6 Aluminum / Clear Anodized

• 303 Stainless Steel

• 316 Stainless Steel

• SAE 360 Brass / Nickel Plated DOME LOADING
PORT (1550 PSIG MAX)
• MAIN VALVE SEAT: OUTLET PORT
(1500 PSIG MAX)
• PCTFE PANEL MOUNTING DETAIL: .37
• ELASTOMER SEALS: THREAD: 1 3/4-16 UN

• BUNA-N USE PANEL CUT-OUT: 1.82/1.78"
MAX PANEL THICKNESS: 0.25"

• Viton®

• EPDM

• Neoprene

• Low temperature nitrile

• MAIN VALVE PARTS:

• 300 Series Stainless Steel

(used in aluminum, brass, and 303 stainless steel body options) 3.08

• 316 Stainless Steel and Nitronic 60 wetted alloys

(used in 316 stainless steel body option)

PORTING .92
SELF-VENTING
• PROCESS/VENT PORTS: CAPTURE PORT
• 1/2” FNPT
• 1/4” SAE J1926 (P/N: 50-12732 shown above)
• 1/2” SAE J1926

• DOME:
• 1/4” FNPT
• 1/4” SAE J1926

• GAUGE PORTS:
• 1/4” FNPT

OPTIONS

• Gauges
• Private Label
• Panel Mounting Nut

Viton® is a registered trademark of E.I.duPont de Nemours and Company D/C: 172010