Premier_Industries_Product_Catalog

ors, valves, and Torc Page 101
hes
Min 2860PDL
r e g u l at HIGH FLOW
USA PISTON SENSED SERIES
PREMIER INDUSTRIES CAPTURED VENTING
Pressure Reducing Regulators
neapolis M i n n e s o ta

PART # - 1 2 3 4 - MODS
50-12732 --

1 BODY/ BONNET/SENSOR 4 O-RING
MATERIAL MATERIAL

1 6061-T6 Aluminum 0 Buna-N
Clear Anodized

2 303 Stainless Steel 2 Viton®

3 316 Stainless Steel 5 EPDM
Clean per spec #515

4 SAE 360 Brass 6 Neoprene
Nickel Plated

2 ELASTOMER L Low-temp nitrile
SEALS

1/4 FNPT M O D I F I C AT I O N S

C 1/2 FNPT 1/2 FNPT

Blank None

S 1/2 FNPT 1/2 FNPT include panel
mounting nut
PN

S * 1/2 SAE J1926 1/2 SAE J1926

3 SEAT MATERIAL

1 PCTFE

Main valve components are 300 Series Stainless Steel for aluminum, brass, and 303 stainless steel body options and D/C: 171910
316 Stainless Steel and Nitronic 60 wetted alloys for the 316 stainless steel body option

PEEK 1000® is a registered trademark of Victrex PLC
Viton® is a registered trademark of E.I.duPont de Nemours & Company

ors, valves, and Torc Page 102
hes
Min 2900
r e g u l at ADJUSTABLE FLOW SERIES
USA PISTON SENSED
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

Two stage design Single stage design
Part # shown above: 50-11573 Part # shown above: 50-11387-01

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

The Premier 2900 Series adjustable flow, piston • Compact size
sensed, variable flow regulators are commonly • Piston sensed
used with calibration gases and industrial hygiene • Click stop, 12 position, variable flow settings
monitors. Models are available in both
single-stage and compact two-stage stage designs. from 0 to 8.0 liters/min
Premier 2900 Series regulators have an integral • Machined bar stock body, bonnet and piston
orifice plate capable of providing up to 11
different flow settings with the simple rotation of eliminates porosity found in castings
a hand knob. The optional two-stage design • Integral pressure relief valve
provides increased flow stability by reducing the • Economically priced
impact of variations in cylinder pressure. Models • Optional two stage design is available for
are available for both corrosive and non-corrosive
service. increased pressure and flow stability throughout
the range of inlet pressure variations.

e Premier 2900 Series pressure reducing regulator’s design is remarkably exible. D/C: 160902
Contact Premier Industries for a custom 2900 Series regulator to meet your exact needs.

Page 103

ors, valves, and Torc
hes
Min
2900 ADJUSTABLE FLOW r e g u l at
SERIES PISTON SENSED USA
Pressure Reducing Regulators PREMIER INDUSTRIES

neapolis M i n n e s o ta

S P E C I F I C AT I O N S OPTIONS

• MAXIMUM INLET PRESSURE: 3500 PSIG (241.32 bar) • Gauges
(with appropriate inlet connection) • Anodized Colors for Aluminum Bodies

• STANDARD PRESET CONTROL PRESSURE: and Bonnets
• 15 PSIG (1.03 bar) outlet pressure • Private Label
• Two stage designs
• FLOW (Cv): • 1/4” inlet (P/N: 50-10385, 50-11321)
• 0.3, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 5.0, 6.0, 7.0, 8.0 SLPM • 1/8” inlet (P/N: 50-11840)

MATERIALS OF CONSTRUCTION I NCRE ASE

• BODY: +-
• 6061-T6 Aluminum, Clear Anodized
E DE CR E AS
• PISTON:
• SAE 360 Brass Ø1.178 FLOW INDICATOR
• 303 Stainless Steel VIEW PORT

• PISTON SEALS: 0
• Viton®
• Numerous other compounds available 0 3000

• VALVE SEAT: 3.8
• Teflon®
(Part number : 50-11387-01 shown above)
• ORIFICE PLATE:
• Standard: Ceramic

PORTING

• STANDARD INLET:
• C-10 (5/8"-18 UNF)

• OPTIONAL INLETS:
• 1/8" or 1/4" FNPT or MNPT
• All CGA Connections Available:
– CGA 165, 180, 320, 510, 580, 600, etc.

• STANDARD OUTLET:
• 1/8" FNPT

• OPTIONAL OUTLETS:
• 1/8", 3/16", or 1/4" Hose Barb
• 1/8" MNPT

Te on® and Viton® are registered trademarks of E.I.duPont de Nemours and Company D/C: 160510
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 104
hes
Min 3000
r e g u l at HIGH PRESSURE SERIES
USA PISTON SENSED
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

The high pressure Premier 3000 Series pressure • Self-venting with adjustable bonnet vent valve
reducing regulators are single stage, piston sensed, • Non-venting optional
variable delivery, pressure reducing regulators, rated for • 15 micron sintered 316 stainless steel inlet filter
inlet and outlet pressures up to 10000 PSIG (689.5 • Cv 0.06 or 0.2
bar) and Cv 0.06 or 0.2. • Optional tamper resistant acorn nut
• Multiple mounting options (bracket/panel nuts/surface mount)
Premier 3000 Series regulators are used to regulate a • Machined bar stock body, bonnet and
broad range of non-corrosive and corrosive media
(based on materials of construction). They are piston eliminates porosity found in castings
designed for increased serviceability and reliable
operation with the integral 15 micron stainless steel A PPL IC AT ION S
valve cartridge filter. Premier 3000 Series regulators
can be supplied with a wide range of inlet and outlet • Research labs
configurations for smooth integration into your • Manufacturing process
desired application. • Petrochemical plants
• Aircraft support systems

e Premier 3000 Series pressure reducing regulator’s design is remarkably exible. D/C: 181810
Contact Premier Industries for a custom 3000 Series regulator to meet your exact needs.

Page 105

ors, valves, and Torc
hes
Min
3000 HIGH PRESSURE r e g u l at
SERIES PISTON SENSED USA
Pressure Reducing Regulators PREMIER INDUSTRIES

neapolis M i n n e s o ta

S P E C I F I C AT I O N S Ø2.68

• MAXIMUM INLET PRESSURE (brass): 6000 PSIG (413.7 bar) 7.0
• MAXIMUM INLET PRESSURE (SS): 10000 PSIG (689.5 bar)
• CONTROL PRESSURE RANGES: 3.84

• 5-300 PSIG (0.35-20.7 Bar), IN OUT
• 5-400 PSIG (0.35-27.6 Bar),
• 5-500 PSIG (0.35-34.5 Bar), Ø2.12
• 5-800 PSIG (0.35-55.2 Bar),
• 5-1000 PSIG (0.35-68.9 Bar), (Part number 30-10000 shown above)
• 10-1500 PSIG (0.69-103.4 Bar),
• 15-2500 PSIG (1.0-172.4 Bar), Ø2.68
• 25-4000 PSIG (1.7-275.8 Bar),
• 50-6000 PSIG (3.4-413.7 Bar), Ø2.25 2.500 HEX
• 100-10000 PSIG (6.9-689.5 Bar) PANEL NUT 2X
• FLOW (Cv): 0.06 or 0.2 .75
USE 2 ⁵/₁₆
MATERIALS OF CONSTRUCTION 2.10 PANEL CUT-OUT
3.84
• BODY OPTIONS : 1/4 FNPT PREMIER INDUSTRIES 7.0
• SAE 360 brass, P/N 30-10212-XXXX-XX
• 316 Stainless Steel, XX000 PSIG MAX INLET

• BONNET OPTIONS: XX00 PSIG OUT
• SAE 360 brass,
• 17-4 Stainless Steel PROUDLY
• 316 Stainless Steel
MADE
• WETTED, OTHER: 316 Stainless Steel, 17-4 Stainless Steel IN
• SEAL OPTIONS: Viton®, Buna-N, EPDM, Kalrez® USA

(Contact factory for Kalrez® pricing) other compounds available upon request Ø2.48

• BACK-UP RINGS: PTFE & PCTFE (Part number 30-10212PN shown above)
• VALVE SEAT OPTIONS:
OP TIONAL PANEL
• Vespel® MOUNTING BRACKET
• PEEK®
• PCTFE (for Ø2.12 body or mounting bracket style regulator body)

(30-10212 SEAT: Vespel®) 1/4-20 UNC-2B
2X
PORTING
(Ø3.5)
• INLET PORTING: (Ø2.120)

• 1/4” FNPT (standard) (Ø2.80)
• OUTLET PORTING:

• 1/4” FNPT (standard)

See the table on page 4 for other porting options (P/N 30-10212)

OPTIONS

• Gauges
• Private label
• Panel mounting bracket (P/N: 30-10059)
• Panel mounting nuts (P/N: 30-10189)
• Tamper resistant acorn nut (P/N: 30-10000, or 30-10212)
• Captured vent port model (P/N: 30-10206)

Vespel® Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company (Part number 30-10059 shown above)
PEEK® is a registered trademark of Victrex PLC
D/C: 181810

ors, valves, and Torc Page 106
hes
Min 3000
r e g u l at HIGH PRESSURE SERIES
USA PISTON SENSED
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PART # -- 1 2 3 4 - 5 6 - 7 MODS
30-10000 - --

1 BODY/BONNET MATERIALS 3 OUTLET 5 6 O-RINGS
(MAX. INLET PRESSURE) PRESSURE

1 SAE 360 Brass Body & Bonnet B 0-300 PSIG 00 BUNA-N
(6000 PSIG / 413.7 Bar) (0-20.7 Bar) 02 VITON®

2 316SS Body, 17-4SS Bonnet A 0-400 PSIG
(10000 PSIG / 689.5 Bar) (0-27.6 Bar)

1 0-500 PSIG 05 EPDM
(0-34.5 Bar)
3 316SS Body & Bonnet KALREZ®
(10000 PSIG / 689.5 Bar) 11
(Contact factory for pricing)
0 0-800 PSIG
SAE 360 Brass Body & Bonnet (0-55.2 Bar) NITRILE,
12 LO-TEMP
4 (3000 PSIG / 206.8 Bar)
2 0-1000 PSIG (Consult factory for other options)
*Rated for select CGA ttings (0-68.9 Bar)

316SS Body, 17-4SS Bonnet 10-1500 PSIG 7 VALVE SEAT
(0.69-103.4 Bar)
5 (3000 PSIG / 206.8 Bar)

*Rated for select CGA ttings

3

2 PORTING CONFIGURATION
(1/4 FNPT)
4 15-2500 PSIG
(1.0-172.4 Bar) 0 VESPEL®
(6000+ psig inlet)
C
S 5 25-4000 PSIG 1 PEEK®
E (1.7-275.8 Bar)
D
A 6 50-6000 PSIG PCTFE
(3.4-413.7 Bar)
2 (0-3000 psig inlet)

(Contact factory for pricing)

100-10000 PSIG M O D I F I C AT I O N S

7 (6.9-689.5 Bar)

(stainless steel only)

4 FLOW Blank None
(Cv)
G1 Consult factory

0 Cv 0.06 NV Non-venting

2 Cv 0.2 ANT Acorn nut

NV/N Non-venting, NACE
MR0175 compliant

10000 PSIG MAX INLET (STAINLESS STEEL) D/C: 181710
6000 PSIG MAX INLET (BRASS)

e end user is responsible to ensure adequate ttings are used to connect regulator to plumbing.
Vespel® Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company
PEEK® is a registered trademark of Victrex PLC
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 107
hes
Min 3000
r e g u l at HIGH PRESSURE SERIES
USA PISTON SENSED
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PART # 1 2 -- 3 4 5 6 7 - 8 9 - MODS
30-10212 - --

316 Stainless Steel body & 17-4 Stainless Steel bonnet standard

1 2 MOUNTING STYLE 5 PORTING 8 9 O-RINGS
CONFIGURATION

MB Mounting bracket style body G 00 BUNA-N
01 AFLAS®
A IN 02 VITON®
05 EPDM
OUT 11 KALREZ®

PN Panel nut style body G (Contact factory for pricing)
(panel nuts included)
L OUT 12 NITRILE,
IN
LO-TEMP
OUTLET G
PRESSURE M O D I F I C AT I O N S
3

GG

0-300 PSIG C IN
(0-20.7 Bar) OUT

B

A 0-400 PSIG S OUT IN
(0-27.6 Bar)

1 5-500 PSIG 6 PORT SIZE
(0.34-34.5 Bar)

2 5-800 PSIG 4 1/4” BLANK None
(0.34-55.2 Bar) 6 3/8”
8 1/2”*
3 10-1500 PSIG 9 9/16”** NV Non-venting
(0.69-103.4 Bar)
*1/2” ports not available in medium & high pressure
4 15-2500 PSIG **9/16” ports only available in medium & high pressure SAE 360 Brass,
(1.0-172.4 Bar)
B body & bonnet

6000 psig max

5 25-4000 PSIG NV/N Non-venting, NACE
(1.7-275.8 Bar) MR0175 compliant
PORT TYPE
7 (IN/OUT)

6 50-6000 PSIG ANT Acorn nut
(3.4-413.7 Bar)
1 FNPT
100-10000 PSIG 2 SAE J1926 P TU Port type uniform
3 SAE AS5202
7 (6.9-689.5 Bar) 4 MEDIUM PRESSURE SM Surface mount
5 HIGH PRESSURE Pattern dependent on
(stainless steel only) 7 MS33649 port type, size, & con g.

4 FLOW Gauge ports: 1/4” FNPT
(Cv)
10000 PSIG MAX INLET (SS)
0 Cv 0.06 6000 PSIG MAX INLET (brass)

e end user is responsible to ensure adequate
ttings are used to connect regulator to plumbing.

2 Cv 0.2 Viton® and Kalrez® are registered trademarks of
E.I.duPont de Nemours and Company
AFLAS® is a registered trademark of the Asahi Glass
Co., Ltd

Contact factory for material D/C: 181710
certi cations. Fees may apply.

ors, valves, and Torc Page 108
hes
Min 3000AL
r e g u l at AIR LOADED SERIES
USA HIGH PRESSURE
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

The Premier 3000AL Series air loaded, piston • 15 micron sintered 316 stainless steel inlet filter
sensed, single stage, high pressure, pressure • Compatible with electro pneumatic controllers
reducing regulators features inlet and outlet • Captured venting
pressures up to 10000 PSIG (689.48 bar), and Cv • Very competitive pricing
0.06, 0.12, or 0.2. Premier 3000AL Series regulators • Machined bar stock body, bonnet and
are designed for increased serviceability and reliable
operation with the integral 15 micron stainless steel piston eliminates porosity found in castings
valve cartridge filter. They are used to regulate to a • Numerous optional features are available.
broad range of non-corrosive and corrosive media
(based on materials of construction). • Hydraulic versions available

e Premier 3000AL Series pressure reducing regulator’s design is remarkably exible. D/C: 182404
Contact Premier Industries for a custom Premier 3000AL Series regulator to meet your exact needs.

Page 109

ors, valves, and Torc
hes
Min
AIR LOADED r e g u l at
HIGH PRESSURE USA
3000AL Pressure Reducing Regulators PREMIER INDUSTRIES
SERIES
neapolis M i n n e s o ta

S P E C I F I C AT I O N S PORTING

• MAXIMUM INLET PRESSURE: • INLET/OUTLET
• 1/4”, 3/8”, 1/2” FNPT
• REGULATOR: 10000 PSIG / 689.5 bar (stainless steel) • 1/4”, 3/8”, 1/2” SAE J1926
6000 PSIG / 413.69 bar (brass)
• AIR ACTUATOR: 100 PSIG (6.89 bar) • 1/4”, 3/8”, 1/2” SAE AS5202
• 1/4”, 3/8”, 9/16” Medium Pressure
• CONTROL PRESSURE RANGES: • 1/4”, 3/8”, High Pressure
• 10-1500 PSIG (0.69 - 103.42 bar)
Diameter: 1.000” • 1/4”, 3/8”, 1/2” NPTF
• AIR ACTUATOR: 1/4-18” NPTF
Area: 0.7854 in • VENT: 1/4” (inlet/outlet port type)
Ratio: / **
• 15-2500 PSIG (1.03 - 172.37 bar)
Diameter: 0.750”
Area: 0.4418 in OPTIONAL ITEMS

Ratio: / ** • Non-venting design
• 50-6000 PSIG (3.45 - 413.69 bar) • Spring loaded design: (P/N: 30-10000 / 30-10212)
• Panel mounting bracket (P/N: 30-10059)
Diameter: 0.500” • Private label
Area: 0.1964 in
Ratio: / **
• 100-10000 PSIG (6.89 - 689.5 bar)
Diameter: 0.375” #10-32 UNF-3A X 3/4"
SHCS ASTM A574 12X

Area: 0.1104 in A574

Ratio: / **

** 4.0” diameter diaphragm Ø2.120
Diaphragm area: 12.5664 in
• FLOW (Cv): 0.06, 0.12, or 0.20 1/4 NPTF DUSTRI E S 3.77
• AMBIENT OPERATING TEMPERATURES:* XXXXX XX 5.13
• -4°F/-20°C to 212°F/100°C (Viton®)
• -15°F/-26°C to 212°F/100°C (BUNA-N) PREMIER INDUSTRIES
100 PSIG MAX

*Lower temperature compounds are available, Above temperature IN OUT 1.19
ranges will apply to the majority of media for which the material is
recommended. Temperature ranges can vary with some media, 5.38 ØA .59
ALWAYS TEST UNDER SERVICE CONDITIONS.

MATERIALS OF CONSTRUCTION .81 OPTIONAL #10-32 UNF
IN SURFACE MOUNT HOLES
• BODY: SAE 360 brass or 316 Stainless Steel
• BONNET: (non-wetted) PATTERN DEPENDENT ON PORT CONFIGURATION

• 303 Stainless Steel FLATS
• HOUSING, AIR ACTUATOR :
OUT
• 6061-T6 Aluminum/clear anodized
• DIAPHRAGM, AIR ACTUATOR : 1/4" EXT.
VENT PORT
• Neoprene, nylon fabric-reinforced
• MAIN VALVE STEM: 17-4 Stainless Steel (hardened) PORT TYPE ØA FLATS
• MAIN VALVE SEAT: Vespel® NPT, NPTF Ø2.48
• VENT VALVE SEAT: Vespel® 1/4" J1926 & M.P. Ø2.48 2.36
• ELASTOMER SEALS: 1/4" AS5202 Ø2.98 2.81
3/8" SAE & M.P. Ø2.98 2.81
• BUNA-N 1/2" SAE Ø3.23 2.98
• AFLAS® 9/16" M.P. Ø3.23 2.98
• Viton®
• EPDM
• Kalrez® (Contact factory for pricing)
• OTHER WETTED PARTS:
• 316 Stainless Steel
• 17-4 Stainless Steel

Kalrez® Vespel® & Viton-A® are registered trademarks of E.I.duPont de Nemours and Company (Part number: 30-10219G shown above)
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd.
D/C: 182303

ors, valves, and Torc Page 110
hes
Min 3000AL
r e g u l at AIR LOADED SERIES
USA HIGH PRESSURE
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

SERIES 1 -- 2 3 4 5 6 - 7 8 MODS
30-10219G --

1 BODY MATERIALS PORTING 6 PORT TYPE
(MAX. INLET PRESSURE) (inlet/outlet/vent)
4 CONFIG.

(1/4 FNPT)

B SAE 360 Brass G 1 FNPT
(6000 psig / 413.7 bar)
A
IN
OUT

Blank 316 Stainless Steel G 2 SAE J1926
(10000 psig / 689.5 bar) 3 SAE AS5202
4 Medium pressure
OUTLET L IN
PRESSURE OUT

2 G

GG

10-1500 psig Diameter: 1.000” C IN
OUT

3 (0.69-103.4 bar) Area: 0.7854 in
Ratio: / *
5 High pressure
4 15-2500 psig Diameter: 0.750” S OUT IN 6 NPTF
(1.0-172.4 bar) Area: 0.4418 in 7 8 O-RINGS
Ratio: / *

6 50-6000 psig Diameter: 0.500” PORT
(3.4-413.7 bar) Area: 0.1964 in
Ratio: / * 5 SIZE

100-10000 psig Diameter: 0.375” (inlet/outlet) 00 BUNA-N
01 AFLAS®
7 (6.9-689.5 bar) Area: 0.1104 in 4 1/4”
02 VITON®
(stainless steel only) Ratio: / * 6 3/8”
05 EPDM
* 4.0” diameter diaphragm 8 1/2”** 11 KALREZ®
Diaphragm area: 12.5664 in
(Contact factory for pricing)
3 FLOW 9 9/16”***
(Cv) MODIFICATIONS
**1/2” ports not available in (Optional)
0 Cv 0.06 medium pressure or high pressure
N Nace compliant
1 Cv 0.12 ***9/16” ports only available in
2 Cv 0.2 medium pressure SM Surface mount

Vent Valve: Cv 0.06 Gauge Ports: 1/4” FNPT D/C: 182003
Vent Port: 1/4” inlet/outlet port type

Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd.

10000 PSIG MAX INLET (Stainless Steel) 6000 PSIG MAX INLET (Brass)

e end user is responsible to ensure adequate ttings are used to connect regulator to plumbing.

Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 111
hes
Min 3000DL
r e g u l at DOME LOADED SERIES
USA HIGH PRESSURE
PREMIER INDUSTRIES P N E U M AT I C
Pressure Reducing Regulators
neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 3000DL Series dome loaded, high pressure, • Captured venting
pneumatic, pressure reducing regulators: rugged, • Dome loaded for remote pressure control
compact regulators for remotely-controlled high • Compatible with electro-pneumatic controllers
pressure applications. These piston sensed units are • 17-4 & 316 stainless steel construction for strength
rated for inlet and outlet pressures up to 10000 PSIG
(689.5 bar) and Cv 0.06, 0.12, 0.20, or 0.30. and corrosion resistance
• 10000 PSIG (689.5 bar) max inlet
Premier 3000DL Series regulators are used to regulate • Cv 0.06, 0.12, 0.20, or 0.30
a broad range of non-corrosive and corrosive media • Economical pricing
(based on materials of construction). Captured • Machined bar stock body, bonnet and
venting allows fluids/gases to be safely piped away.
piston reduce particle shedding and contamination

e Premier 3000DL Series pressure reducing regulator’s design is remarkably exible. D/C: 181107
Contact Premier Industries for a custom 3000DL Series regulator to meet your exact needs.

Page 112

ors, valves, and Torc
hes
Min
3000DL DOME LOADED r e g u l at
SERIES HIGH PRESSURE USA
HYDRAULIC PREMIER INDUSTRIES
Pressure Reducing Regulators
neapolis M i n n e s o ta

S P E C I F I C AT I O N S PANEL NUT STYLE

• MAX INLET PRESSURE: 10000 PSIG (689.5 bar) Ø2¼ -12 UN 2.500 HEX PANEL NUT 2X
• MAX OUTLET PRESSURE: 10000 PSIG (689.5 bar)
• MAX DOME LOAD: 10000 PSIG (689.5 bar) 2.03
• DOME TO SENSOR RATIO: 1:1 3.77
• FLOW (Cv): 0.06, 0.12, 0.20, 0.30
• VENT VALVE (Cv): 0.06 (Part number 30-10221GPN shown above)
• OPERATING TEMPERATURE:
PANEL MOUNTING BRACKET STYLE
• -15°F/-26°C to 165°F/74°C (BUNA-N)
• -4°F/-20°C to 165°F/74°C (VITON®) 1.563 DOME PORT
• -65°F/-54°C to 165°F/74°C (EPDM) HEX 1/4
• 15°F/-9°C to 165°F/74°C (AFLAS®)
• -65°F/-54°C to 165°F/74°C (NITRILE) Ø2.12

MATERIALS OF CONSTRUCTION 1.19
3.77
• BODY & BONNET : 4.60
• 316 Stainless Steel,

• WETTED PARTS, OTHER:
• 316 Stainless Steel,
• 17-4 Stainless Steel

• MAIN VALVE SEAT: Vespel®
• VENT VALVE SEAT: Vespel®
• MAIN VALVE / VENT VALVE STEM: 17-4 Stainless Steel
• O-RING MATERIAL:

• BUNA-N
• AFLAS®
• Viton®
• EPDM
• Kalrez® (Contact factory for pricing)
• Nitrile, Lo-temp
• BACK-UP RINGS: PCTFE

PORTING PROUDLY

MADE

IN USA

• INLET/ OUTLET PORTING OPTIONS:

• 1/4”, 3/8”, 1/2” FNPT

• 1/4”, 1/2”, 3/8”, SAE J1926

• 1/4”, 1/2”, 3/8”, SAE AS5202* .59

• 1/4”, 3/8”, 9/16”, Medium pressure

• 1/4”, 3/8”, 9/16”, High pressure (Part number 30-10221GMB shown above)
• GAUGE PORTS:

• 1/4” FNPT PORT TYPE ØA FLATS
• DOME PORTS:

• 1/4” (match inlet/outlet/vent type) NPT, NPTF Ø2.48
• VENT PORTS:

• 1/4” (match inlet/outlet/vent type) VENT PORT 2.360 1/4” J1926, M.P., H.P. Ø2.48 2.36
1/4 MP & HP ONLY
1/4” AS5202 Ø2.98 2.81
OPTIONS

• Gauges 3/8” SAE, M.P., H.P. Ø2.98 2.81
• Private label
• Panel mounting bracket (P/N: 30-10059) Ø2.480 1/2” SAE Ø3.23 2.98
• Panel mounting nuts (P/N: 30-10189)
9/16” M.P. Ø3.23 2.98

*SAE AS5202 supersedes MS33649 *Bodies w/ ‘L’ porting con gurations and 3/8”
Vespel® Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company ports and larger require a larger ØA
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd.
D/C: 181107

ors, valves, and Torc DOME LOADED Page 113
hes
Min HIGH PRESSURE 3000DL
r e g u l at HYDRAULIC SERIES
USA Pressure Reducing Regulators
PREMIER INDUSTRIES

neapolis M i n n e s o ta

SERIES 1 2 -- 3 4 5 6 - 7 8 - MODS
30-10221G - --

1 2 MOUNTING STYLE PORTING PORT TYPE

MB Mounting bracket style body 4 CONFIG. 6 (IN/OUT
PN Panel nut style body
(1/4” FNPT) VENT/DOME)
3 MAIN VALVE SEATS & Cv
G 1 FNPT

A OUT 2 SAE J1926
IN 3 SAE AS5202*
4 Medium Pressure
G
5 High Pressure
L OUT 7 8 O-RINGS
IN
G

GG

C OUT IN

0 Vespel® S OUT IN
Cv 0.06

1 Vespel® 5 PORT
SIZE
Cv 0.12

Vespel® 4 1/4” 00 BUNA-N
Cv 0.20
2

6 3/8” 01 AFLAS®

3 Vespel® 8 1/2”* 02 VITON®

Cv 0.30

9 9/16** 05 EPDM

*1/2” not available in medium & high pressure 11 KALREZ®
**9/16” only available in medium & high pressure
(Contact factory for pricing)

12 NITRILE,
LO-TEMP

M O D I F I C AT I O N S

*SAE AS5202 supersedes MS33649 Blank None
10000 PSIG MAX INLET
D/C: 182409
e end user is responsible to ensure adequate ttings are used to connect regulator to plumbing.
Vespel® Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 114
hes
Min 3016
r e g u l at HIGH PRESSURE SERIES
USA HIGH FLOW
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 3016 Series regulators are high pressure • Self venting design
high flow, piston sensed, pressure reducing • Balanced stem for increased outlet pressure
regulators rated for inlet pressures up to
10000 psig / 689.5 bar (dependent upon stability
con guration), and (Cv) 1.0 or 2.0. Premier 3016 • High flow capacity (Cv): 1.0 or 2.0
series regulators feature a balanced stem design • Piston sensed
for increased outlet pressure stability. • Great sensitivity
• Optional gauge ports
Premier 3016 Series regulators are available in a • Machined bar stock body eliminates porosity
variety of materials for seamless integration into
your desired application. Common applications found in castings
include: commercial diving, and high pressure
tube trailers.

e Premier 3016 Series pressure reducing regulator’s design is remarkably exible. D/C: 171907
Contact Premier Industries for a custom 3016 Series regulator to meet your exact needs.

Page 115

ors, valves, and Torc
hes
Min
3016 HIGH PRESSURE r e g u l at
SERIES USA
HIGH FLOW PREMIER INDUSTRIES
Pressure Reducing Regulators

neapolis M i n n e s o ta

S P E C I F I C AT I O N S OPTIONS

• MAXIMUM INLET PRESSURE: • Captured venting, Cv 1.0, 10000 PSIG MAX (P/N: 30-10225)
• 17-4 STAINLESS STEEL BODY: 10000 PSIG (689.5 bar) • Captured venting, Cv 2.0, 6000 PSIG MAX, 3/4” port option,
• 316 STAINLESS STEEL BODY:
• Cv 2.0, 6000 PSIG / 413.7 Bar & surface mount (P/N: 30-10228)
• Cv 1.0, 10000 PSIG / 689.5 Bar • Panel mounting bracket (P/N: 30-10059)
• BRASS BODY: • Private Label
• Cv 2.0, 4000 PSIG / 275.8 bar
• Cv 1.0, 6000 PSIG / 413.7 bar PANEL MOUNTING PANEL NUT STYLE
• MONEL BODY: 6000 PSIG / 413.7 bar BRACKET STYLE
Ø2.68
• CONTROL PRESSURE RANGES:
• 0-300 PSIG (0-20.7 bar) 2½ HEX PANEL NUT (2X) Ø2¼-12 UN
• 0-500 PSIG (0-34.5 bar)
• 0-1000 PSIG (0-68.9 bar), Ø2.12 (Ø2⁹∕ PANEL HOLE)
• 10-1500 PSIG (0.7-103.4 bar)
• 15-2500 PSIG (1.0-172.4 bar) 7.14 1.5
• 25-4000 PSIG (1.7-275.8 bar) Cv 1.0
• 50-6000 PSIG (3.5-413.7 bar) 7.20 IN OUT
• 100-10000 PSIG (6.9-413.7 bar) Cv 2.0

• FLOW (Cv): 1.0 or 2.0
• OPERATING TEMPERATURE:**

• -15°F/-26°C to 165°F/74°C (BUNA-N)
• -4°F/-20°C to 165°F/74°C (Viton®)
• -65°F/-54°C to 165°F/74°C (EPDM)
** Lower temperature compounds available

2.15

MATERIALS OF CONSTRUCTION PROUDLY 1.25 PROUDLY 2.06
Cv 1.38
• BODY OPTIONS: MADE 2.0 MADE Cv
• 17-4 Stainless Steel 1.0
• 316 Stainless Steel IN USA IN USA
• SAE 360 Brass
• Monel 400 ØA PORT TYPE ØA FLATS

• MAIN VALVE STEM: 17-4 Stainless Steel (hardened) NPT Ø2.73
• MAIN VALVE SEAT: Vespel®
• VENT VALVE SEAT: PCTFE IN OUT 1/2” NPT Cv 2.0 Ø2.98
• BACK-UP RINGS: PTFE
• O-RING MATERIAL OPTIONS: SAE J1926 Ø2.98 2.80

• BUNA-N 1/4” SAE AS5202 Ø2.98 2.80
• AFLAS®
• Viton® ⅜” & ½” SAE AS5202 Ø3.23 3.05
• EPDM
• Kalrez® (contact factory for pricing) SAE
• OTHER WETTED PARTS: 316 Stainless Steel, FLATS

17-4 Stainless Steel (Part number 30-10216 shown above)

BALL-BEARING TAMPER RESISTANT
HAND KNOB ACORN NUT

PORTING (Optional) (Optional)

• INLET & OUTLET OPTIONS:
• 1/4” FNPT, SAE J1926, SAE AS5202**
• 3/8” FNPT, SAE J1926, SAE AS5202**
• 1/2” FNPT, SAE J1926, SAE AS5202

**Not recommended for Cv 2.0
See P/N 30-10228 for 3/4” ports
• GAUGE PORTS: 1/4” FNPT

SAE AS5202 supersedes MS33649 D/C: 181408
Viton®, Vespel® and Kalrez® are registered trademarks of E.I.duPont de Nemours and Company.
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd.

ors, valves, and Torc Page 116
hes
Min 3016
r e g u l at HIGH PRESSURE SERIES
USA HIGH FLOW
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PART NUMBER 1 2 -- 3 4 5 6 7 - 8 9 - 10 - MODS

30-10216 - - --

1 2 MOUNTING STYLE 5 PORTING 8 9 O-RINGS
CONFIG.

MB Mounting bracket style body G

A 00 BUNA-N

Panel nut style body OUT IN
(Panel nuts included)
PN 01 AFLAS®
02 VITON®
G

3 BODY/BONNET MATERIALS L IN
(MAX. INLET PRESSURE) OUT

G

SAE 360 brass body & bonnet GG

1 (Cv 2.0, 4000 PSIG / 275.8 Bar) C IN 05 EPDM
OUT
(Cv 1.0, 6000 PSIG / 413.7 Bar)

316 stainless steel body, KALREZ®
17-4 stainless steel bonnet
2 (Cv 2.0, 6000 PSIG / 413.7 Bar) S OUT IN 11 (contact factory for pricing)

(Cv 1.0, 10000 PSIG / 689.5 Bar)

Monel 400® body, 6 PORT SIZE 10 Cv (FLOW )
(Inlet/outlet)
4 Stainless steel bonnet

(6000 PSIG / 413.7 Bar)

17-4 Stainless Steel 4 1/4”** 1 Cv 1.0
2 Cv 2.0
5 body & bonnet
M O D I F I C AT I O N S
(10000 PSIG / 689.5 Bar)

OUTLET 6 3/8”**
PRESSURE
4

0 0-300 PSIG (0-20.7 Bar) 8 1/2”
1 0-500 PSIG (0-34.5 Bar)
2 0-1000 PSIG (0-68.9 Bar) **Not recommended for Cv 2.0
3 10-1500 PSIG (0.7-103.4 Bar) Gauge ports 1/4” FNPT
4 15-2500 PSIG (1.0-172.4 Bar)
5 25-4000 PSIG (1.7-275.8 Bar) 7 PORT TYPE Blank None
6 50-6000 PSIG (3.5-413.7 Bar) (Inlet/outlet)
7 100-10000 PSIG (6.9-413.7 Bar) ANT Acorn nut
1 FNPT BBL Ball-bearing loader
P TU Port type uniform
2 SAE J1926

3 SAE AS5202

10000 PSIG MAX INLET (17-4 stainless steel, 316 Stainless Steel Cv 1.0) 6000 PSIG MAX INLET (316 Stainless Steel Cv 2.0/Monel/Brass Cv 1.0) 4000 PSIG MAX (brass, Cv 2.0)
e end user is responsible to ensure adequate ttings are used to connect regulator to plumbing.

Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company.
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd. Monel is a registered trademark of Specialty Metals Corporation.

Contact factory for material certi cations. Fees may apply. D/C: 181408

ors, valves, and Torc Page 117
hes
Min 3016AL
r e g u l at AIR LOADED SERIES
USA HIGH PRESSURE, HIGH FLOW
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 3016AL Series regulators are high • Captured venting
pressure, high flow, piston sensed, pressure • High flow capacity (Cv): 1.0 or Cv 2.0
reducing regulators rated for Cv 1.0 or 2.0. This • Balanced stem for increased outlet pressure
regulator features an air loader with a max inlet
pressure of 100 PSIG / 6.89 bar and a balanced stability
stem for increased outlet pressure stability. • 316 stainless steel construction
• Compatible with electro-pneumatic controllers
The 3016AL regulator’s captured venting allows • Max inlet pressure: 10000 PSIG (689.5 bar), Cv 1.0
potentially hazardous media to be safely piped
away. 6000 PSIG (413.7 bar), Cv 2.0

• Machined bar stock body eliminates porosity
found in castings

e Premier 3016AL Series pressure reducing regulator’s design is remarkably exible. D/C: 182103
Contact Premier Industries for a custom Premier 3016AL Series regulator to meet your exact needs.

Page 118

ors, valves, and Torc
hes
Min
AIR LOADED r e g u l at
HIGH PRESSURE, HIGH FLOW USA
3016AL Pressure Reducing Regulators PREMIER INDUSTRIES
SERIES
neapolis M i n n e s o ta

S P E C I F I C AT I O N S PORTING

• MAXIMUM INLET PRESSURE: • INLET/OUTLET:
• REGULATOR: • 1/2” NPT, SAE AS5202**, SAE J1926
• 10000 PSIG (689.5 bar), Cv 1.0 (P/N: 30-10220) • 9/16” MEDIUM PRESSURE
• 6000 PSIG (413.7 bar), Cv 2.0 (P/N: 30-10227)
• AIR ACTUATOR: 100 PSIG (6.89 bar) **SAE AS5202 supersedes MS33649,
see part numbers for more porting options
• CONTROL PRESSURE RANGES:
• 10-1500 PSIG (0.69 - 103.42 bar) • AIR ACTUATOR: 1/4” FNPT
• VENT: 1/4” (inlet/outlet port type)
Diameter: 1.000” • GAUGE PORTS: 1/4” FNPT
Area: 0.7854 in
Ratio: / ** OPTIONS

• 15-2500 PSIG (1.03 - 172.37 bar) • Private Label
• Panel mounting bracket (P/N: 30-10500)
Diameter: 0.750”
Area: 0.4418 in PREMIER INDUSTRIES
Ratio: / ** 100 PSIG MAX

• 50-6000 PSIG (3.45 - 413.69 bar)

Diameter: 0.500”
Area: 0.1964 in
Ratio: / **

• 100-10000 PSIG (6.89 - 689.5 bar) Cv 1.0 only

Diameter: 0.375”
Area: 0.1104 in
Ratio: / **

** 4.0” diameter diaphragm

Diaphragm area: 12.5664 in #10-32 UNF-3A X 3/4” 1/4” FNPT PROUDLY
100 PSIG MAX IMNAUDSEA
• FLOW (Cv): SHCS ASTM A574 12X

• MAIN VALVE: 1.0 (P/N: 30-10220), 2.0 (P/N: 30-10227) Ø5.38
• VENT VALVE: 0.06
• AMBIENT OPERATING TEMPERATURES:
• -4°F/-20°C to 212°F/100°C (Viton®)*
• -15°F/-26°C to 212°F/100°C (BUNA-N)*
• -65°F/-54°C to 212°F/100°C (EPDM)
*lower temperature compounds available upon request

MATERIALS OF CONSTRUCTION 1/2” PORT 2X 1.38
2.33
• BODY: 316 Stainless Steel PREMIER INDUSTRIES 3.93
• HOUSING, AIR ACTUATOR : P/N 30-10220-XXXX 5.40

• 6061-T6 Aluminum/clear anodized 10000 PSIG MAX INLET
• DIAPHRAGM, AIR ACTUATOR : XX00 PSIG OUT

• Neoprene, nylon fabric-reinforced 1.75
• MAIN VALVE SEAT:
1/4” VENT PORT Ø2.73
• Vespel®, Cv 1.0 (P/N: 30-10220) (IN/OUT PORT TYPE) FNPT ONLY
• PCTFE, Cv 2.0 (P/N:30-10227)
• VENT VALVE SEAT: Vespel® 1/4-20 UNC X 3/8 DP .81
• ELASTOMER SEALS: SURFACE MOUNT OPTION
• BUNA-N
• AFLAS® OUT
• Viton®
• EPDM IN
• Kalrez® (contact factory for pricing)
• BACK-UP RING OPTIONS: Ø3.48 3.30 SAE
• PTFE SAE
• PCTFE
• OTHER WETTED PARTS:
• 316 Stainless Steel
• 17-4 Stainless Steel

Viton® and Kalrez® are registered trademarks of E.I.duPont de Nemours and Company (Part number 30-10220 shown above) D/C: 181508
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd.

ors, valves, and Torc Page 119
hes
Min 3016AL
r e g u l at AIR LOADED SERIES
USA HIGH PRESSURE, HIGH FLOW
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

Cv 1.0 MODEL

PART NUMBER - 1 2 3 4 - 5 6

30-10220 - -

1 OUTLET 2 PORTING 4 5 PORT TYPE
PRESSURE CONFIGURATIONS

10-1500 PSIG G N NPT
(0.69 - 103.42 bar) A SAE AS5202**
A IN J SAE J1926
3 Diameter: 1.000” M MEDIUM PRESSURE
OUT 5 6 O-RINGS
Area: 0.7854 in
Ratio: / ** GG

15-2500 PSIG C IN
(1.03 - 172.37 bar) OUT

4 Diameter: 0.750” G

Area: 0.4418 in L OUT IN
Ratio: / **
G
50-6000 PSIG
(3.45 - 413.69 bar) S IN
OUT
6 Diameter: 0.500”
3 PORT SIZE 00 BUNA-N
Area: 0.1964 in
Ratio: / ** 6 3/8”* 01 AFLAS®
02 VITON®
100-10000 PSIG
(6.89 - 689.5 bar)

7 Diameter: 0.375”

Area: 0.1104 in
Ratio: / **

8 1/2”*

** 4.0” diameter diaphragm 05 EPDM
Diaphragm area: 12.5664 in

9 9/16”** 11 KALREZ®
(contact factory for pricing)
*3/8” & 1/2” ports not available in medium pressure
**9/16” ports only available in medium pressure M O D I F I C AT I O N S

10000 PSIG MAX INLET Blank None

e end user is responsible to ensure adequate ttings are used to connect regulator to plumbing. SM Surface mount
**SAE AS5202 supersedes MS33649 P TU Port type uniform
Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd. D/C: 181508
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 120
hes
Min 3020
r e g u l at HIGH PRESSURE SERIES
USA LOW-TORQ UE HAND KNOB
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

The high pressure Premier 3020 Series pressure • Low-torque hand knob
reducing regulators are single stage, piston sensed, • 15 micron stainless steel valve cartridge filter
variable delivery, pressure reducing regulators, • Self venting design (venting can easily be rendered
designed for inlet and outlet pressures up to 10000
PSIG (689.5 Bar), and Cv 0.06, 0.12 or 0.2. This non-operational)
regulator features an easily adjusted, ball bearing hand • Numerous optional features are available
knob for smooth adjustments. • Captured venting available
• Machined bar stock body, bonnet and
Premier 3020 Series regulators are used to regulate a
broad range of non-corrosive and corrosive media piston eliminates porosity found in castings
(based on materials of construction). They are • Economical pricing
designed for increased serviceability and reliable
operation with the integral 15 micron stainless steel A PPL IC AT ION S
valve cartridge filter. Premier 3020 Series regulators
can be supplied with a wide range of inlet and outlet • Chemical injection
configurations. • Wellhead control panel
• Subsea valve actuation
• Hydraulic Power Units (HPU)

e Premier 3020 Series pressure reducing regulator’s design is remarkably exible. D/C: 162203
Contact Premier Industries for a custom 3020 Series regulator to meet your exact needs.

Page 121

ors, valves, and Torc
hes
Min
3020 HIGH PRESSURE r e g u l at
SERIES LOW-TORQ UE HAND KNOB USA
Pressure Reducing Regulators PREMIER INDUSTRIES

neapolis M i n n e s o ta

S P E C I F I C AT I O N S OPTIONS

• MAXIMUM INLET PRESSURE (SS) : 10000 PSIG (689.5 Bar) • Gauges
• MAXIMUM INLET PRESSURE (BRASS) : 6000 PSIG (413.7 Bar) • Captured venting
• CONTROL PRESSURE RANGES: • Private label
• Panel mounting bracket (P/N: 30-10059)
• 0-200 PSIG (0-13.8 Bar)
• 5-500 PSIG (0.35-34.5 Bar) Ø3.24
• 5-800 (0.35-55.2 Bar)
• 10-1500 PSIG (0.69-103.4 Bar) PREMIER INDUSTRIES Ø2.12 7.0/6.9
• 15-2500 PSIG (1.0-172.4 Bar) P/N 30-10218-XXXXX-XX
• 25-4000 PSIG (1.7-275.8 Bar) XX000 PSIG MAX INLET
• 50-6000 PSIG (3.4-413.7 Bar)
• 100-10000 PSIG (6.9-689.5 Bar) XX00 PSIG OUT
• FLOW (Cv): 0.06, 0.12, or 0.2
• OPERATING TEMPERATURES: PROUDLY
• BUNA-N: -15°F / -26°C* to 165°F / 74°C
• Viton®: -4°F / -20°C* to 165°F / 74°C MADE
• EPDM: -65°F / -54°C to 165°F / 74°C
IN USA
* lower temperature compounds are available
1.19
MATERIALS OF CONSTRUCTION
.59 IN
• BODY : 1/4” FNPT GAUGE PORTS
• 316 Stainless Steel (OPTIONAL)
• SAE 360 Brass
1/4” VENT PORT
• BONNET: IN
• 17-4 Stainless Steel
• SAE 360 Brass FLATS FLATS

• OTHER WETTED PARTS: 316 Stainless Steel
• O-RING MATERIAL OPTIONS:

• Viton®
• Buna-N
• EPDM
• Kalrez® (contact factory for pricing)
• AFLAS®
• Nitrile, lo-temp
• BACK-UP RINGS: PTFE, and PCTFE
• MAIN VALVE: 316 Stainless Steel & 17-4 Stainless Steel
• MAIN VALVE SEAT: Vespel®

ØA ØA

PORTING OUT OUT

• INLET PORTING OPTIONS: (Part Number: 30-10218GC ) (Part Number: 30-10218G )

• 1/4”, 3/8”, 1/2” FNPT PORT TYPE ØA FLATS
• 1/4”, 3/8”, 1/2” SAE J1926 NPT, NPTF Ø2.48
• 1/4”, 3/8”, 1/2” SAE AS5202** 1/4” M.P. Ø2.48 2.36
• 1/4”, 3/8”, 9/16” Medium Pressure 1/4” & 3/8” SAE Ø2.98 2.81
• OUTLET PORTING OPTIONS: 3/8” M.P. Ø2.98 2.81
• 1/4”, 3/8”, 1/2” FNPT 1/2” SAE 2.98
• 1/4”, 3/8”, 1/2” SAE J1926 9/16” M.P. Ø3.23 2.98
• 1/4”, 3/8”, 1/2” SAE AS5202** Ø3.23
• 1/4”, 3/8”, 9/16” Medium Pressure

**SAE AS5202 supersedes MS33649 D/C: 181508
Vespel® Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company
A as® is a registered trademark of the Asahi Glass Co., Ltd.

ors, valves, and Torc Page 122
hes
Min 3020
r e g u l at HIGH PRESSURE SERIES
USA LOW-TORQ UE HAND KNOB
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

SELF VENTING

SERIES - 1 2 3 4 5 - 6 7 8 - MODS
30-10218G - --

1 BODY/BONNET MATERIALS 3 FLOW 6 7 O-RINGS
(MAX. INLET PRESSURE) (Cv)

1 SAE 360 Brass Body & Bonnet 0 Cv 0.06 00 BUNA-N
(6000 PSIG / 413.7 Bar) 1 Cv 0.12

2 316SS Body, 17-4SS Bonnet 01 AFLAS
(10000 PSIG / 689.5 Bar)

2 Cv 0.2 02 VITON®

2 OUTLET 05 EPDM
PRESSURE
4 PORT SIZE
0 0-200 PSIG 11 KALREZ®
(0-13.8 Bar) Gauge ports 1/4” FNPT (contact factory for pricing)

4 1/4” 12 NITRILE,
LO-TEMP
1 5-500 PSIG
(0.34-34.5 Bar) 6 3/8”
8 1/2”* PORT
5-800 PSIG 8 CONFIGURATION
(0.34-55.2 Bar)
2

3 10-1500 PSIG 9 9/16”** G
(0.69-103.4 Bar)
*1/2” not available in medium pressure A OUT
**9/16” only available in medium pressure. IN

GG

C OUT IN

4 15-2500 PSIG
(1.0-172.4 Bar)
G
5 25-4000 PSIG 5 PORT TYPE
(1.7-275.8 Bar) L OUT
IN
G

S OUT IN

6 50-6000 PSIG 1 FNPT
(3.4-413.7 Bar) 2 SAE J1926
3 SAE AS5202**
7 100-10000 PSIG 4 Medium Pressure M O D I F I C AT I O N S
(6.9-689.5 Bar) 5 High Pressure
(stainless steel only) Blank none
**SAE AS5202 supersedes MS33649
Self-venting feature can be rendered SM surface mount*
non-functional. P TU port type uniform
10000 PSIG MAX INLET
*Surface mount: pattern dependent on
e end user is responsible to ensure adequate ttings are used to port type, size, and con guration
connect regulator to plumbing.
Kalrez® & Viton® are registered trademarks of E.I.duPont de D/C: 181508
Nemours and Company
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd.
Contact factory for material certi cations. Fees may apply.

Page 123

ors, valves, and Torc
hes
Min
3020 HIGH PRESSURE r e g u l at
SERIES LOW-TORQ UE HAND KNOB USA
Pressure Reducing Regulators PREMIER INDUSTRIES

neapolis M i n n e s o ta

CAPTURED VENTING

SERIES - 1 2 3 4 5 - 6 7 8 - MODS

30-10218GC - --

1 BODY/BONNET MATERIALS 3 FLOW 6 7 O-RINGS
(MAX. INLET PRESSURE) (Cv)

1 SAE 360 Brass Body & Bonnet 0 Cv 0.06 00 BUNA-N
(6000 PSIG / 413.7 Bar) 1 Cv 0.12 01 AFLAS
2 Cv 0.2
2 316SS Body, 17-4SS Bonnet 4 PORT SIZE
(10000 PSIG / 689.5 Bar)
Gauge ports 1/4” FNPT
OUTLET 02 VITON®
PRESSURE 4 1/4”
2 6 3/8”
8 1/2”*
05 EPDM

0 0-200 PSIG 11 KALREZ®
(0-13.8 Bar) (contact factory for pricing)

1 5-500 PSIG 12 NITRILE,
(0.34-34.5 Bar) LO-TEMP

2 5-800 PSIG 8 PORT
(0.34-55.2 Bar) CONFIGURATION

3 10-1500 PSIG 9 9/16”** G
(0.69-103.4 Bar)
*1/2” not available in medium pressure A OUT
**9/16” only available in medium pressure. IN

15-2500 PSIG 5 PORT TYPE GG
(1.0-172.4 Bar)
4 1 FNPT C OUT IN
2 SAE J1926
5 25-4000 PSIG 3 SAE AS5202 G
(1.7-275.8 Bar) 4 Medium Pressure
L OUT
**SAE AS5202 supersedes MS33649 IN
G

6 50-6000 PSIG S OUT IN
(3.4-413.7 Bar)

7 100-10000 PSIG M O D I F I C AT I O N S
(6.9-689.5 Bar)
(stainless steel only) Blank none

10000 PSIG MAX INLET SM surface mount*
P TU port type uniform
e end user is responsible to ensure adequate ttings are used to connect regulator to plumbing.
Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company *Surface mount: pattern dependent on
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd. port type, size, and con guration
Contact factory for material certi cations. Fees may apply.
D/C: 181508

ors, valves, and Torc Page 124
hes
Min 3023
r e g u l at HIGH PRESSURE SERIES
USA 15000 PSIG
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

The high pressure Premier 3023 Series pressure • Captured venting
reducing regulators are single stage, piston sensed, • 15000 PSIG (1034.21 bar) MAX
variable delivery, pressure reducing regulators, • Cv 0.06 or 0.12
designed for inlet and outlet pressures up to 15000 • Numerous optional features
PSIG (1034.21 bar) and Cv 0.06 or 0.12. • Economical pricing
• Machined bar stock body, bonnet and
Premier 3023 Series regulators are used to regulate a
broad range of non-corrosive and corrosive media piston eliminates porosity found in castings
(based on materials of construction). The regulator’s
captured venting allows gases to be safely piped away.
Premier 3023 Series regulators can be supplied with a
wide range of inlet and outlet configurations.

e Premier 3023 Series pressure reducing regulator’s design is remarkably exible. D/C: 150212
Contact Premier Industries for a custom 3023 Series regulator to meet your exact needs.

Page 125

ors, valves, and Torc
hes
Min
3023 HIGH PRESSURE r e g u l at
SERIES 15000 PSIG USA
Pressure Reducing Regulators PREMIER INDUSTRIES

neapolis M i n n e s o ta

S P E C I F I C AT I O N S PANEL NUT PANEL MOUNTING

• MAX INLET PRESSURE (SS): 15000 PSIG (1034.21 bar) STYLE BRACKET STYLE

• CONTROL PRESSURE RANGES: Ø2.68
• 5-500 PSIG (0.34 - 34.47 bar),

• 5-1000 PSIG (0.34 - 68.95 bar),

• 10-1500 PSIG (0.69 - 103.42 bar),

• 15-2500 PSIG (1.03 - 172.37 bar),

• 25-4000 PSIG (1.72 - 275.79 bar), Ø2¼-12 UN 2.500 HEX Ø2.12
• 50-6000 PSIG (3.45 - 413.69 bar), PANEL NUT 2X
• 100-10000 PSIG (6.89 - 689.48 bar),
• 300-15000 PSIG (20.68 - 1034.21 bar) USE PANEL
CUT-OUT: 2⁵/

• FLOW (Cv): 0.06 or 0.12

• OPERATING TEMPERATURE: 2.03
3.77
• -15°F/-26°C to 165°F/74°C (BUNA-N)
.59
• -4°F/-20°C to 165°F/74°C (VITON®) 1.19
3.77
• -65°F/-54°C to 165°F/74°C (EPDM) 6.9

• 15°F/-9°C to 165°F/74°C (AFLAS)

• -65°F/-54°C to 165°F/74°C (NITRILE)

MATERIALS OF CONSTRUCTION 15000 PSIG
MAX IN
• BODY : 316 Stainless Steel, 15000 PSIG
• BONNET: 17-4 Stainless Steel MAX IN
• WETTED PARTS, OTHER:
(Part number 30-10213G shown above)
• 316 Stainless Steel,
• 17-4 Stainless Steel OPTIONAL BALL BEARING LOADER OR
• BACK-UP RINGS: PTFE, PCTFE TAMPER RESISTANT ACORN NU T
• VALVE SEAT: Vespel®
Ø3.24
PORTING
PANEL MOUNTING BRACKET (optional)
• INLET/OUTLET/

• 1/4” FNPT (standard), medium pressure, high pressure
• 3/8” FNPT, medium pressure, high pressure
• 9/16” medium pressure

• VENT PORTING:

• 1/4” FNPT (standard)
• 1/4” Medium pressure
• 1/4” High pressure
• GAUGE PORTS: 1/4” FNPT

OPTIONS 1/4-20 UNC-2B
2X
• Gauges
• Private label (Ø3.5)
• Panel mounting bracket (P/N: 30-10059)
• Panel mounting nuts with threaded body (Ø2.120)
• Captured vent port (Ø2.80)
• Air operated design
• Dome loaded design
• Tamper resistant acorn nut

(Part number 30-10059 shown above)

Vespel® & Viton® are registered trademarks of E.I.duPont de Nemours and Company D/C: 182303

ors, valves, and Torc Page 126
hes
Min 3023
r e g u l at HIGH PRESSURE SERIES
USA 15000 PSIG
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

SERIES 1 2 -- 3 4 5 6 - 7 8 9 - MODS
30-10213G - --

1 2 MOUNTING STYLE PORTING 7 8 O-RINGS

MB Mounting bracket style body 4 CONFIG. 00 BUNA-N
PN Panel nut style body 01 AFLAS®
(1/4” FNPT)
3 OUTLET PRESSURE
A OUT
1 5-500 PSIG / 0.34-34.5 Bar IN
2 5-1000 PSIG / 0.34-68.9 Bar
3 10-1500 PSIG / 0.69-103.4 Bar L OUT
4 15-2500 PSIG / 1.0-172.4 Bar
IN

C OUT IN 02 VITON®

S OUT IN 05 EPDM

E OUT 11 KALREZ®

(contact factory for pricing)

OUT IN

5 PORT 12 NITRILE,
SIZE LO-TEMP

9 Cv MAIN VALVE
(Valve seat material)
5 25-4000 PSIG / 1.7-275.8 Bar 4 1/4”

6 50-6000 PSIG / 3.4-413.7 Bar 0 Cv 0.06
VESPEL®
6 3/8”

7 100-10000 PSIG / 6.9-689.5 Bar 9/16” (only available 1 Cv 0.12
(stainless steel only) in medium pressure) VESPEL®
9

8 300-15000 PSIG / 20.68-1034.21 Bar 6 PORT TYPE MODIFICATIONS
(stainless steel only) (1/4” vent port) (Optional)

Blank None

1 FNPT BBL Ball-bearing loader
4 Medium Pressure

5 High Pressure ANT Acorn nut

15000 PSIG MAX INLET D/C: 172405

e end user is responsible to ensure adequate ttings are used to connect regulator to plumbing.
Vespel® Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 127
hes HIGH PRESSURE
Min AIR LOADED 3023AL
r e g u l at 15000 PSIG SERIES
USA Pressure Reducing Regulators
PREMIER INDUSTRIES

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

The high pressure, air loaded, Premier 3023AL Series • Compatible with electro-pneumatic controllers
pressure reducing regulators are single stage, piston • 15000 PSIG (1034.21 bar) MAX
sensed, pressure reducing regulators, designed for inlet • Captured venting
and outlet pressures up to 15000 PSIG (1034.21 bar) • Cv 0.06 or 0.12
and Cv 0.06 or 0.12. • Numerous optional features
• Economical pricing
Premier 3023AL Series Regulators are designed for • Machined bar stock body, bonnet and
compatibility with electropneumatic controllers,
enabling piloted pressure control from an inert gas at piston eliminates porosity found in castings
low pressures (100 psig / 6.89 bar max air load).

Premier 3023AL Series regulators are used to regulate
a broad range of non-corrosive and corrosive media
(based on materials of construction). Captured
venting is standard.

e Premier 3023AL Series pressure reducing regulator’s design is remarkably exible. D/C: 170507
Contact Premier Industries for a custom 3023AL Series regulator to meet your exact needs.

HIGH PRESSURE Page 128
AIR LOADED
15000 PSIG ors, valves, and Torc
Pressure Reducing Regulators hes
Min
r e g u l at
USA
3023AL PREMIER INDUSTRIES
SERIES
neapolis M i n n e s o ta

S P E C I F I C AT I O N S PORTING

• MAX INLET PRESSURE: • INLET/OUTLET PORTING OPTIONS:
• REGULATOR: 15000 PSIG / 1034.21 bar (stainless steel)
• AIR ACTUATOR: 100 PSIG (6.89 bar) • 1/4”, 3/8” FNPT (standard)
• 1/4”, 3/8”, 9/16” Medium Pressure
• CONTROL PRESSURE RANGES: • 1/4”, 3/8” High Pressure
• 10-1500 PSIG (0.69 - 103.42 bar) • VENT PORT: 1/4” inlet/outlet port type
Diameter: 1.000” • LOAD PORT: 1/4” NPTF
Area: 0.7854 in
Ratio: / ** OPTIONS
• 15-2500 PSIG (1.03 - 172.37 bar)
Diameter: 0.750” • Gauges
Area: 0.4418 in • Private label
Ratio: / ** • Panel mounting bracket: P/N: 30-10059
• 50-6000 PSIG (3.45 - 413.69 bar)
Diameter: 0.500” PREMIER INDUSTRIES
Area: 0.1964 in 100 PSIG MAX
Ratio: / **
• 100-10000 PSIG (6.89 - 689.5 bar) PROUDLY
Diameter: 0.375”
Area: 0.1104 in MADE
Ratio: / ** IN
• 300-15000 PSIG (20.68 - 1034.21 bar) USA
Diameter: 0.312” 1/4 NPTF
Area: 0.0765 in
Ratio: / ** Ø5.38

** 4.0” diameter diaphragm Ø2.120
Diaphragm area: 12.5664 in
LABEL DUSTRI E S 5.13
• FLOW (Cv): 0.06 or 0.12 XXXXX XX
• OPERATING TEMPERATURE: 3.77
Ø2.48
• -15°F/-26°C to 212°F/100°C (BUNA-N) IN FNPT OUT
• -4°F/-20°C to 212°F/100°C (VITON®) ONLY
• -65°F/-54°C to 212°F/100°C (EPDM) 1.19
• 15°F/-9°C to 212°F/100°C (AFLAS)
.59
MATERIALS OF CONSTRUCTION
1/4" EXT.IN
• BODY OPTIONS : VENT PORTOUT
• 316 Stainless Steel .81

• HOUSING, AIR ACTUATOR: 2.36
• 6061-T6 Aluminum, Clear Anodized 1/4” M.P.

• DIAPHRAGM, AIR ACTUATOR: ONLY
• Neoprene, nylon reinforced
(Part number: 30-10229G shown above)
• WETTED PARTS, OTHER:
• 316 Stainless Steel, D/C: 170507
• 17-4 Stainless Steel

• BACK-UP RING OPTIONS: PTFE, PCTFE
• MAIN VALVE SEAT: Vespel®
• VENT VALVE SEAT: Vespel®
• MAIN/VENT VALVE STEM:

• 17-4 Stainless Steel, hardened

Vespel® Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd

ors, valves, and Torc HIGH PRESSURE Page 129
hes AIR LOADED
Min 15000 PSIG 3023AL
r e g u l at Pressure Reducing Regulators SERIES
USA
PREMIER INDUSTRIES

neapolis M i n n e s o ta

SERIES -- 1 2 3 4 - 5 6 7
30-10229G --

1 OUTLET PRESSURE 2 PORTING 5 6 O-RINGS
CONFIGURATION

3 10-1500 PSIG Diameter: 1.000” A OUT 00 BUNA-N
0.69-103.4 Bar Area: 0.7854 in IN
Ratio: / **
L OUT
15-2500 PSIG Diameter: 0.750” 01 AFLAS®
Area: 0.4418 in IN
4 1.0-172.4 Bar Ratio: / **

C OUT IN 02 VITON®

50-6000 PSIG Diameter: 0.500”
6 3.4-413.7 Bar Area: 0.1964 in
Ratio: / ** S OUT IN 05 EPDM

100-10000 PSIG Diameter: 0.375” E OUT 11 KALREZ®
7 6.9-689.5 Bar Area: 0.1104 in (contact factory for pricing)

(stainless steel only) Ratio: / ** OUT IN

300-15000 PSIG Diameter: 0.312” 3 PORT 7 Cv MAIN VALVE
SIZE (Valve seat material)
8 20.68-1034.21 Bar Area: 0.0765 in
0 Cv 0.06
(stainless steel only) Ratio: / ** ( VESPEL®)

4 1/4”

** 4.0” diameter diaphragm 1 Cv 0.12
Diaphragm area: 12.5664 in ( VESPEL®)

6 3/8”

9 9/16”**(Only available in

medium pressure)

4 PORT TYPE
(1/4” vent port)

1 FNPT D/C: 172405

4 Medium Pressure

5 High Pressure

15000 PSIG MAX INLET

e end user is responsible to ensure adequate ttings are used to connect regulator to plumbing.
Vespel® Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc HIGH PRESSURE Page 130
hes
Min 20000 PSIG 3025
r e g u l at Pressure Reducing Regulators SERIES
USA
PREMIER INDUSTRIES

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 3025 Series high pressure, pressure reducing • Rated for pressures up to 20000 PSIG (1378.95 bar)
regulators are single stage, pneumatic, piston sensed • Flow capacity (Cv): 0.04
pressure reducing regulators. 3025 Series regulators are • Captured venting
rated for inlet and outlet pressures up to 20000 PSIG • Low torque, ball-bearing hand knob
(1378.95 bar), and Cv 0.04. The 3025 series regulator • Optional panel mounting bracket style body
features a low torque, ball-bearing hand knob, and
optional mounting styles to ensure a smooth or threaded body with panel mounting nuts
integration into your high pressure application. • Very competitive pricing
Captured venting standard. • Machined bar stock body, bonnet and

piston eliminates porosity found in castings

e Premier 3025 Series pressure reducing regulator’s design is remarkably exible. D/C: 182404
Contact Premier Industries for a custom 3025 Series regulator to meet your exact needs.

Page 131

ors, valves, and Torc
hes
Min
3025 HIGH PRESSURE r e g u l at
SERIES USA
20000 PSIG PREMIER INDUSTRIES
Pressure Reducing Regulators
neapolis M i n n e s o ta

S P E C I F I C AT I O N S OPTIONAL ITEMS

• MAXIMUM INLET PRESSURE: 20000 PSIG (1378.95 bar) • Private label
• CONTROL PRESSURE RANGE: • Panel mounting nuts
• Panel mounting bracket (P/N: 30-10500)
• 25-3000 PSIG (1.72 - 206.84 bar) • Tamper resistant acorn nut
• 50-6000 PSIG (3.45 - 413.69 bar) • Surface mount (P/N: 30-10215SM)
• 100-10000 PSIG (6.89 - 689.48 bar)

• 300-15000 PSIG (20.68 - 1034.21 bar)

• 500-20000 PSIG (34.47 - 1378.95 bar)

• FLOW (Cv): 0.04

• OPERATING TEMPERATURE: PANEL NUT STYLE BODY MOUNTING BRACKET

• -15°F/-26°C to 165°F/74°C (BUNA-N) STYLE BODY

• -4°F/-20°C to 165°F/74°C (VITON®) Ø3.24
• -65°F/-54°C to 165°F/74°C (EPDM)

**lower temperature compounds available upon request

MATERIALS OF CONSTRUCTION OVERSIZED
HANDKNOB
W/ BALL
BEARING
LOADER

• BODY : Ø2.50
• 17-4 Stainless Steel
3” HEX PANEL NUTS 7.73
• BONNET: 2½-12 UN THREADS 2.64
• 17-4 Stainless Steel 2.25
USE Ø2 ⁄ (2.56 in.) 1.88
• WETTED PARTS, OTHER: PANEL CUT-OUT .75
• 316 Stainless Steel
• 17-4 Stainless Steel 3/8-24 UNF
.940
• O-RINGS:
• Buna-N 4.42
• Aflas® 3.04
• Viton® Ø3.20
• EPDM NO. XXXX 1/4 M.P. VENT
• Kalrez® (Contact factory for pricing)

• BACK-UP RINGS: PCTFE & PEEK
• VALVES:

• 17-4 Stainless Steel, Hardened
• VALVE SEAT:

• Vespel®

3.12 IN OUT
.8120000 PSIG MAX
PORTING
(Part number shown above: 30-10215G) VENT
• INLET PORTING:

• 1/4” Medium pressure, High Pressure
• 3/8” Medium pressure, High Pressure
• OUTLET PORTING:
• 1/4” Medium pressure, High Pressure
• 3/8” Medium pressure, High Pressure
• VENT PORT:
• 1/4” inlet/outlet type

Kalrez® Vespel® & Viton® are registered trademarks of E.I.duPont de Nemours and Company D/C: 171812
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd.

ors, valves, and Torc HIGH PRESSURE Page 132
hes
Min 2H0Y0D0 0RPASUILGI C 36025
r e g u l at P2 0r e0s0s0urPe SRIeGd uc i ng Regul ato r s SERIES
USA Pressure Reducing Regulators
PREMIER INDUSTRIES

neapolis M i n n e s o ta

PART NUMBER 1 2 - 3 4 5 6 7 - 8 9 - MODS

30-10215G - --

1 2 BODY STYLE 5 PORTING 89 O-RING
CONFIGURATION MATERIAL

MB Mounting bracket style body B 00 BUNA-N

PN Panel nut style body 01 AFLAS®

(panel nuts included) S 02 VITON®
6 PORT SIZE
3 OUTLET PRESSURE 4 1/4”
6 3/8”
7 PORT TYPE 05 EPDM
4 Medium pressure
3 25 - 3000 psig 5 High pressure
(1.72 - 206.84 bar)
11 KALREZ® (Contact factory
for pricing)

6 50 - 6000 psig
(3.45 - 413.69 bar)

M O D I F I C AT I O N S

7 100 - 10000 psig
(6.89 - 689.48 bar)

8 300 - 15000 psig Blank None
(20.68 - 1034.21 bar)
ANT Acorn nut
500 - 20000 psig
9 (34.47 - 1378.95 bar)

4 FLOW (Cv)

0 Cv: 0.04

20000 PSIG MAX INLET (stainless steel) D/C: 172305

e end user is responsible to ensure adequate ttings are used to connect regulator to plumbing.
Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd.
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc AIR LOADED Page 133
hes HIGH PRESSURE, 20K
Min Pressure Reducing Regulators 3025AL
r e g u l at SERIES
USA
PREMIER INDUSTRIES

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 3025AL Series air loaded, pneumatic, high • Rated for pressures up to 20000 PSIG (1378.95 bar)
pressure, pressure reducing regulators are piston • Compatible with electro pneumatic controllers
sensed, single stage, pressure reducing regulators rated • Flow capacity (Cv): 0.043
for inlet and outlet pressures up to 20000 PSIG • Captured venting
(1378.95 bar), and Cv 0.043. Captured venting • Very competitive pricing
standard. • Machined bar stock body, bonnet and

piston eliminates porosity found in castings

e Premier 3025AL Series pressure reducing regulator’s design is remarkably exible. D/C: 182404
Contact Premier Industries for a custom 3025AL Series regulator to meet your exact needs.

AIR LOADED Page 134
HIGH PRESSURE, 20K
Pressure Reducing Regulators ors, valves, and Torc
hes
Min
r e g u l at
USA
3025AL PREMIER INDUSTRIES
SERIES
neapolis M i n n e s o ta

S P E C I F I C AT I O N S OPTIONAL ITEMS

• MAXIMUM INLET PRESSURE: 20000 PSIG (1378.95 bar) • Gauge
• MAXIMUM LOAD PRESSURE: 100 PSIG (6.89 bar) • Private label
• CONTROL PRESSURE RANGE:
PREMIER INDUSTRIES
• 50-6000 PSIG (3.45 - 413.69 bar) 100 PSIG MAX
Diameter: 0.462”
Area: 0.1676 in 1/4 FNPT PROUDLY
Ratio: / **
MADE
• 100-10000 PSIG (6.89 - 689.5 bar) IN
Diameter: 0.362” 100 PSIG MAX
Area: 0.1029 in USA
Ratio: / **
Ø5.38
• 300-15000 PSIG (20.68 - 1034.21 bar)
Diameter: 0.313”
Area: 0.0769 in
Ratio: / **

• 500-20000 PSIG (34.47 - 1378.95 bar)
Diameter: 0.25”
Area: 0.0491 in
Ratio: / **

** 4.0” diameter diaphragm
Diaphragm area: 12.5664 in

• FLOW (Cv): 0.043
• VENT VALVE (Cv): 0.043

MATERIALS OF CONSTRUCTION IN & OUT 6.09
4.63
• WETTED PARTS: 316 Stainless Steel, 17-4 Stainless Steel 2.85
• VALVES: 2.25 3.12
.81
• 17-4 Stainless Steel, Hardened 1.88
• HOUSING, AIR ACTUATOR:
.940
• 6061-T6 Aluminum, Clear Anodized
• DIAPHRAGM, AIR ACTUATOR: .75 3.04
Ø3.20
• Neoprene, Nylon Fabric Reinforced NO. XXXX
• O-RINGS:
IN OUT
• BUNA-N 20000 PSIG MAX
• Aflas®
• Viton® VENT
• EPDM
• KALREZ® (Contact factory for pricing) 1/4 VENT
• BACK-UP RINGS: PCTFE
• MAIN & VENT VALVE SEATS: (Part number 30-10215ALG shown above)
• Vespel®

PORTING

• INLET/ OUTLET/VENT PORTING:

• 1/4” Medium pressure, High Pressure
• 3/8” Medium pressure, High Pressure
• LOAD PORT:
• 1/4” FNPT (100 psig max)
• VENT PORT:
• 1/4” inlet/outlet port type

Kalrez®, Vespel®, & Viton® are registered trademarks of E.I.duPont de Nemours and Company D/C: 171306

ors, valves, and Torc HA IIRG HLOPARDEESSDURE Page 135
hes H YI GDHRAPURLEISCSURE , 20K
Min 2P0r e0s0s0urPe SRIeGd uc i ng Regul ato r s 3602052A5L
r e g u l at Pressure Reducing Regulators S ESREIREISE S
USA
PREMIER INDUSTRIES

neapolis M i n n e s o ta

PART NUMBER -- 1 2 3 4 - 5 6

30-10215ALG - -

1 OUTLET PRESSURE 3 PORT SIZE

6 50 - 6000 psig 4 1/4”
(3.45 - 413.69 bar)

7 100 - 10000 psig 6 3/8”
(6.89 - 689.5 bar)

8 300 - 15000 psig 4 PORT TYPE
(20.68-1034.21 bar) (IN/OUT/VENT)

9 500 - 20000 psig 4 Medium pressure
(34.47-1378.95 bar)

PORTING 5 High pressure
5 6 O-RINGS
2 CONFIGURATION

B

00 BUNA-N

S

01 AFLAS®

02 VITON®

05 EPDM

11 KALREZ®
(Contact factory for pricing)

20000 PSIG MAX INLET (stainless steel) D/C: 171406

e end user is responsible to ensure adequate ttings are used to connect regulator to plumbing.
Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company
Aflas® is a registered trademark of the Asahi Glass Co., Ltd.
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 136
hes
Min 3500
r e g u l at MINIATURE PNEUMATIC SERIES
USA HIGH PRESSURE
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 3500 Series pressure reducing regulators are • Piston sensed
your affordable and compact solution for high pressure • Main valve cartridge with 15 micron,
pneumatic applications. These rugged, piston sensed
regulators are rated for 6000 PSIG (413.69 bar) with a 316 stainless steel filter
wide range of field adjustable delivery pressure ranges, • 3 knob styles, basic, fluted, and tee handle
up to 6000 PSIG (413.69 bar) and Cv: 0.06 or 0.2. • Machined bar stock body and piston eliminates
With a variety of construction material options,
porting configurations, hand-knob styles, and porosity found in castings
mounting options, you can be confident the Premier • Rear mounting holes and threaded bonnet standard,
3500 Series pressure reducing regulator will integrate
seamlessly into your pneumatic application. optional panel mounting nuts available
• Two, three, or four ¼” NPTF ports standard
• Non-venting
• Field adjustable outlet pressure ranges
• Minimal soft goods
• Compact & economically priced
• Optional tamper proof acorn nut.

e Premier 3500 Series pressure reducing regulator’s design is remarkably exible. D/C: 173008
Contact Premier Industries for a custom 3500 Series regulator to meet your exact needs.

Page 137

ors, valves, and Torc
hes
Min
MINIATURE PNEUMATIC r e g u l at
HIGH PRESSURE USA
3500 Pressure Reducing Regulators PREMIER INDUSTRIES
SERIES
neapolis M i n n e s o ta

S P E C I F I C AT I O N S 1.97
• MAXIMUM INLET PRESSURE: 6000 PSIG (413.69 bar)
• CONTROL PRESSURE RANGES: 60°

• 0-25 PSIG (0 - 1.72 bar) 1.75 PANEL
• 0-80 PSIG (0 - 5.52 bar) 4.8 MOUNTING
• 0-140 PSIG (0 - 9.65 bar) NUTS, 2X
• 0-220 PSIG (0 - 15.17 bar) USE
• 5-700 PSIG (0.34 - 48.26 bar)
• 5-1200 PSIG (0.34 - 82.73 bar) 1.85/1.75
• 5-1800 PSIG (0.34 - 124.12 bar) PANEL
• 5-2500 PSIG (0.34 - 172.37 bar) CUT-OUT
• 10-6000 PSIG (0.69 - 413.69 bar)
• Cv: 0.06 or 0.2 60° .50 PORTING TYP
• DESIGN PROOF PRESSURE: 150% maximum rated 1.5

(PORTING
CONFIG C

ONLY)

MATERIALS OF CONSTRUCTION (P/N: 50-12282-2CXXXX222 w/ uted hand knob
shown above)
• BODY:
• 6061-T6 Aluminum, Nickel Plated (standard) 1.86
• 303 Stainless Steel
• 316 Stainless Steel .38
• SAE 360 Brass/Nickel Plated
• Monel® 3.6

• VALVE STEM: 17-4 Stainless Steel 45° 1.73
• WETTED PARTS:
.60
• 316 Stainless Steel (with 316 stainless steel body option) 1.25
• 300 Series Stainless Steel / MOUNTING HOLES
10-32 UNF- 2B
17-4 Stainless Steel (with all other body options) .25 MIN FULL THD, 2X
• SEALS:
(P/N: 50-12282-1BXXXX110 w/ basic hand knob
• Low-temperature nitrile (standard) shown above)
• Nitrile
• Viton®
• EPDM
• Neoprene
• VALVE SEAT:
• PEEK® (standard)
• PCTFE
• Vespel®
• MAIN VALVE FILTER:
• 15 micron sintered 316 stainless steel

PORTING 3.5

• STANDARD INLETS: 1/4” FNPT
• STANDARD OUTLETS: 1/4” FNPT
• PORT OPTIONS:

• Two, three, or four port versions available

OPTIONS 5.3
• Gauges (plug): stainless steel for both stainless body options,
2.0
chrome plated brass for all other options (PORTING
• Basic hand knob, fluted hand knob, tee handle, or acorn nut CONFIG
• Panel mounting nuts (threaded bonnet and mounting holes standard) B, D, AND E
• CGA fittings
• Private label ONLY)
• For custom materials of construction (monel®, hastelloy® etc.)
(P/N: 50-12282-4DXXXX312 w/ T-Handle
please contact factory. shown above)

PEEK is a registered trademark of Victrex PLC. Hasetelloy is a registered trademark of Haynes International, Inc. D/C: 182203
Vespel and Viton are registered trademarks of E.I.duPont de Nemours and Company
Monel is a registered trademark of Special Metals Corporation.

ors, valves, and Torc Page 138
hes
Min 3500
r e g u l at MINIATURE PNEUMATIC SERIES
USA HIGH PRESSURE
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PART # -1 2 -3 4 -5 6 -7 8 9
50-12282 --- -

1 BODY MATERIAL 3 OUTLET 6 SEAT
& FINISH PRESSURE MATERIAL

1 6061-T6 Aluminum 0 0-25 PSIG (0 - 1.72 bar) 1 PCTFE
Nickel Plated 1 0-80 PSIG (0 - 5.52 bar)
2 0-140 PSIG (0 - 9.65 bar)
2 303 Stainless Steel 3 0-220 PSIG (0 - 15.17 bar) 2 PEEK®
Clean per spec #515 4 5-700 PSIG (0.34 - 48.26 bar)
5 5-1200 PSIG (0.34 - 82.73 bar)
3 316 Stainless Steel 6 5-1800 PSIG (0.34 - 124.12 bar) 3 Vespel®
Clean per spec #515 7 5-2500 PSIG (0.34 - 172.37 bar) 7 HAND KNOB
8 10-6000 PSIG (0.69 - 413.69 bar)
4 SAE 360 Brass
Nickel Plated

5 Monel 400®

1 Basic knob

2 PORTING
CONFIGURATIONS
2 Fluted knob

A 4 MAIN VALVE
(Cv)
3 Tee handle

B 1 0.06 max 4 None ** locked /
2 0.20 max tamper resistant

5 O-RING SEAL 8 MOUNTING
MATERIAL
1/8” FNPT

C* 1 Mounting holes
(no mounting nuts)
1 Nitrile
D 2 Low-temp nitrile 2 Panel mounting nuts
E 3 Viton® & mounting holes
4 EPDM
5 Neoprene 9 GAUGES

PEEK is a registered trademark of Victrex PLC. Vespel and Viton are registered trademarks of E.I.duPont de Nemours & Company. 0 None
Monel is a trademark of Specialty Metals Corporation
* All ports are 1/4” FNPT unless otherwise indicated on the porting con guratons. Include gauges

**TAMPER RESISTANT ACORN NUT 2 (port con g. “A” not
THE END USER IS RESPONSIBLE TO SPECIFY A PRESET OUTLET PRESSURE. IF AN OUTLET PRESSURE IS NOT
SPECIFIED, THE PRESSURE WILL BE LEFT UNSET. NEVER EXCEED THE MAXIMUM OUTLET PRESSURE SPECIFIED ON available with gauges)
THE PART NUMBER.
Contact factory for material certi cations. Fees may apply. D/C: 182203

ors, valves, and Torc Page 139
hes
Min 3500AL
r e g u l at AIR LOADED SERIES
USA HIGH PRESSURE, PNEUMATIC
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

(Non-venting 3500AL w/ bias spring shown above)

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 3500AL Series air loaded, pressure • Compatible with electro-pneumatic controllers &
reducing regulators are your affordable and manual pilot regulators
compact solution for high pressure, pneumatic
applications. These rugged, piston sensed • 6000 PSIG / 413.69 bar max inlet
regulators are rated for 6000 PSIG (413.69 bar) • Three load ratios: 1:2 , 1:3, and 1:4
and Cv: 0.06 or 0.2. With three available load • Captured venting standard
ratios, 1:2 , 1:3, and 1:4, and an optional bias • Optional non-venting design with bias spring
spring, a vast range of outlet pressures can be
controlled (maximum outlet pressure of 3670 PSIG / (4X air load + 0-150 PSIG bias)
53.04 bar with a 4:1 ratio + bias spring). Premier • Cv 0.06 or 0.2
3500AL regulators feature captured venting to • Compact design
safely pipe away expelled media. With a variety of • Machined bar stock body and piston eliminates
construction material options, load ratios, porting
configurations, and mounting options, you can be porosity found in castings
confident the Premier 3500AL Series air loaded, • Bottom mount (standard)
pressure reducing regulator will integrate • Optional panel mounting
seamlessly into your pneumatic application. • Two or four port designs available

e Premier 3500AL Series pressure reducing regulator’s design is remarkably exible. D/C: 181608
Contact Premier Industries for a custom 3500AL Series regulator to meet your exact needs.

ors, valves, and Page 140

Torc

hes
Min
AIR LOADED r e g u l at
HIGH PRESSURE, PNEUMATIC USA
3500AL Pressure Reducing Regulators PREMIER INDUSTRIES
SERIES
neapolis M i n n e s o ta

S P E C I F I C AT I O N S OUTLET PORT PANEL MOUNTING NUTS
1/4-18 FNPT (OPTIONAL)
• MAX INLET PRESSURE: 6000 PSIG (413.69 bar) 1000 PSIG Ø 2.5
• MAX LOADING PRESSURE: 1000 PSIG (68.95 bar) MAX 2.25 HEX
• LOADER:OUTLET PRESSURE RATIO: 1 ¾-20 UN-2B
USE Ø 1.85/1.75 PANEL CUT-OUT
• 1:2**
• 1:3** LOADING PORT
• 1:4** 1/4-18 FNPT
• 1:4 + 0-150 PSIG bias**
A VIEW A-A
** Approximately 2 psig additional dome load per 100 psi inlet
pressure to maintain outlet/loader ratio on Cv 0.2 design. 1.73
Approximately 1.5 psig additional dome load per 100 psi inlet
pressure to maintain outlet/loader ratio on Cv 0.06 design. 45° .65
• Cv: 0.06 or 0.2 .60 .60
• LEAK RATE: Bubble tight N
.50 A
MATERIALS OF CONSTRUCTION 3.29

• BODY & BONNET OPTIONS: INLET PORT MOUNTING HOLES
• 6061-T6 Aluminum, Clear Anodized (standard) 1/4-18 FNPT 10-32 UNF - 2B .25 VENT PORT
• 303 Stainless Steel 6000 PSIG MAX 2X 1/4-18 FNPT
• 316 Stainless Steel
(P/N: 50-12306 shown above)
• PISTON:
• 303 Stainless Steel LOADING PRESSURE GAUGE,
• 316 Stainless Steel (316 Stainless Steel body option) Ø1.50, RANDOM ORIENTATION

• MAIN VALVE COMPONENTS: Ø1.74
• 300 Series Stainless Steel

• MAIN VALVE SEAT:
• PEEK®
• PCTFE
• Vespel®

• O-RING SEALS:
• Nitrile
• Viton®
• EPDM
• Neoprene

• PANEL MOUNTING NUTS (OPTIONAL):
• 6061-T6 Aluminum (nickel plated)

PORTING

• STANDARD INLETS: 1/4” FNPT
• STANDARD OUTLETS: 1/4” FNPT
• LOADING PORT: 1/4” FNPT, (1/8-27 FNPT w/ bias)
• VENT PORT: 1/4” FNPT
• GAUGE PORTS: 1/8” FNPT

OPTIONS 4.5
• Gauges
INLET LOADING PORT
• Private label 1/8-27 FNPT
• Panel mounting nuts (X2 required) 1/4-18 FNPT 1000 PSIG MAX RATED,
6000 PSIG MAX LIMIT LOADER PRESSURE
(Order Separately: P/N 50-11803) TO GAUGE MAXIMUM.
• Optional non-venting design with bias spring
RANDOM ORIENTATION
(4X air load + 0-150 PSIG bias)
• For custom materials of construction (P/N: 50-12398 non-venting design w/ bias spring shown above)

(monel®, hastelloy® etc.) please contact factory.

PEEK is a registered trademark of Victrex PLC. Hasetelloy is a registered trademark of Haynes International, Inc. D/C: 181608
Vespel and Viton are registered trademarks of E.I.duPont de Nemours and Company. Monel is a registered trademark of Special Metals Corporation.

ors, valves, and Torc Page 141
hes
Min 3500AL
r e g u l at AIR LOADED SERIES
USA HIGH PRESSURE, PNEUMATIC
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

SERIES -1 2 -3 4 5 -6 7
50-12306
-- -

1 BODY MATERIALS 4 SEAT MATERIAL 7 LOADER RATIO
& FINISH

1 6061-T6 Aluminum 1 PEEK® 2 1:2**
Clear Anodize 2 PCTFE (2000 psig max outlet)
3 Vespel®
2 303 Stainless Steel 5 FLOW (Cv) 3 1:3**
Clean per spec #515 (3000 psig max outlet)

3 316 Stainless Steel 4 1:4**
Clean per spec #515
(4000 psig max outlet)

2 PORTING ** Approximately 2 psig
additional dome load per 100 psi
1 2 port 1 0.06 inlet pressure to maintain
2 0.2 outlet/loader ratio on Cv 0.2
2 4 port 6 GAUGES design. Approximately 1.5 psig
3 O-RING MATERIAL additional dome load per 100 psi
1 Nitrile inlet pressure to maintain
2 Viton® outlet/loader ratio on Cv 0.06
3 EPDM design.
4 Neoprene
1 None

2 Include gauges
(4 port only)

PEEK® is a registered trademark of Victrex PLC D/C: 181608
Vespel® and Viton® are registered trademarks of E.I.duPond De Nemours and Company
For custom materials of construction (monel®, hastelloy® etc.) please contact factory.
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 142
hes
Min 3500DL
r e g u l at DOME LOADED SERIES
USA HIGH PRESSURE, PNEUMATIC
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 3500DL Series dome loaded, pressure • Compatible with electro-pneumatic controllers
reducing regulators are your affordable and • Piston Sensed
compact solution for high pressure pneumatic • Reduced particle contamination with 15 micron
applications. These rugged, piston sensed
regulators are rated for 6000 PSIG (413.69 bar), valve cartridge filter
featuring a 1:1 loader with a maximum outlet • Captured venting
pressure of 1000 PSIG (68.95 bar) and Cv: 0.06 • Lightweight, compact design
or 0.2. Premier 3500DL regulators feature • Machined bar stock body and piston eliminates
captured venting to safely pipe away expelled
media. With a variety of construction material porosity found in castings
options, porting configurations, and mounting • Bottom mount (standard)
options, you can be confident the Premier • Optional threaded body & panel mounting nuts
3500DL Series dome loaded, pressure reducing • Two or four port designs available
regulator will integrate seamlessly into your • 1:1 loader with max outlet pressure of 1000 PSIG
pneumatic application.
(68.9 bar)

e Premier 3500DL Series pressure reducing regulator’s design is remarkably exible. D/C: 161003
Contact Premier Industries for a custom 3500DL Series regulator to meet your exact needs.

ors, valves, and Page 143

Torc

hes
Min
DOME LOADED r e g u l at
HIGH PRESSURE, PNEUMATIC USA
3500DL Pressure Reducing Regulators PREMIER INDUSTRIES
SERIES
neapolis M i n n e s o ta

S P E C I F I C AT I O N S OPTIONAL PANEL A
MOUNTING NUTS, 2X
• MAXIMUM INLET PRESSURE: USE Ø1.85/1.75 1.73
• 6000 PSIG (413.69 bar) PANEL CUT-OUT

• OUTLET PRESSURE: LABEL .50
• 1000 PSIG (68.95 bar)
A
• MAX DOME LOAD: 1000 PSIG (68.95 bar)
• LOAD RATIO: 1:1** 3.12
** Cv 0.06: an additional 10-50 psi (0.69- 3.45 bar) INLET PORT
1/4-18 FNPT
dome load is required to maintain a 1:1 outlet pressure 6000 PSIG MAX
to dome load ratio.
Cv 0.2: an additional 10-70 psi (0.69- 3.45 bar) dome 45° .65 VIEW A-A
load is required to maintain a 1:1 outlet pressure to .60 .60
dome load ratio. MOUNTING HOLES
• Cv: 0.06 or 0.2 10-32 UNF-2B .25
• LEAK RATE: Bubble tight N 2X
VENT PORT
MATERIALS OF CONSTRUCTION 1/4-18 FNPT

• BODY: (P/N: 50-12251-11XX1 shown above)
• 6061-T6 Aluminum, Clear Anodized (standard)
• 303 Stainless Steel OUTLET GAUGE INLET GAUGE
• 316 Stainless Steel (OPTIONAL) (OPTIONAL)

• BONNET: 60°
• 6061-T6 Aluminum, Clear Anodized (standard)
• 303 Stainless Steel 1.5 TYP 60°
• 316 Stainless Steel
60° 1/8-27 NPT,
• PISTON: TYP 2
• 303 Stainless Steel
• 316 Stainless Steel (316 stainless steel body option) (P/N: 50-12251-12XX2 shown above)

• MAIN VALVE COMPONENTS:
• 300 Series Stainless Steel

• MAIN VALVE SEAT: PEEK® (standard)
(other options available)

• O-RING SEALS: Nitrile, PTFE (standard)
(other options available)

• PANEL MOUNTING NUTS (OPTIONAL):
• 6061-T6 Aluminum (nickel plated)

PORTING

• STANDARD INLETS: 1/4” FNPT
• STANDARD OUTLETS: 1/4” FNPT
• DOME PORT: 1/4” FNPT
• VENT PORT: 1/4” FNPT
• GAUGE PORTS: 1/8” FNPT

OPTIONS
• Gauges

• Private label
• Panel mounting nuts (X2 required)

(Order Separately: P/N 50-11803)
• For custom materials of construction

(monel®, hastelloy® etc.) please contact factory.

PEEK is a registered trademark of Victrex PLC. Monel is a registered trademark of Special Metals Corporation. D/C: 180702
Hastelloy is a registered trademark of Haynes International, Inc.

ors, valves, and Torc Page 144
hes
Min 3500DL
r e g u l at DOME LOADED SERIES
USA HIGH PRESSURE, PNEUMATIC
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

SERIES -1 2 -3 4 -5 6
50-12251 -- -

1 BODY MATERIALS 4 SEAT MATERIAL
& FINISH

1 6061-T6 Aluminum 1 PEEK®
Clear Anodize 2 PCTFE
3 Vespel®
2 303 Stainless Steel 5 FLOW (Cv)
Clean per spec #515

3 316 Stainless Steel
Clean per spec #515

2 PORTING

1 2 port 1 0.06
2 0.2
2 4 port 6 GAUGES
3 O-RING MATERIAL
1 Nitrile 1 None
2 Viton®
3 EPDM 2 Include gauges
4 Neoprene (4 port only)

PEEK® is a registered trademark of Victrex PLC D/C: 160610
Vespel® and Viton® are registered trademarks of E.I.duPond De Nemours and Company
For custom materials of construction (monel®, hastelloy® etc.) please contact factory.
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 145
hes
Min 3560
r e g u l at MINIATURE, PNEUMATIC SERIES
USA HIGH PRESSURE, 10K
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 3560 Series pressure reducing regulators • 10000 psig (689.48 bar) max
are your affordable and compact solution for high • Captured-venting
pressure pneumatic applications. These rugged, • Cv 0.06, or 0.20
piston sensed regulators are designed for inlet and • Machined bar stock body and piston eliminates
outlet pressures up to 10000 PSIG (689.48 bar)
and Cv 0.06 or 0.20. Pipe away potentially toxic porosity found in castings
or hazardous media with the tamper resistant • Rear mounting holes standard with optional
captured venting. Optional panel mounting and
bottom mounting available. panel mounting nuts
• Compact and economically priced

e Premier 3560 Series pressure reducing regulator’s design is remarkably exible. D/C: 162311
Contact Premier Industries for a custom 3560 Series regulator to meet your exact needs.

Page 146

ors, valves, and Torc
hes
Min
3560 MINIATURE, PNEUMATIC r e g u l at
SERIES HIGH PRESSURE, 10K USA
Pressure Reducing Regulators PREMIER INDUSTRIES

neapolis M i n n e s o ta

S P E C I F I C AT I O N S USE 1.5
PANEL CUT-OUT
• MAXIMUM INLET PRESSURE: FOR MOUNTING
• 10000 PSIG (689.48 bar)
OUTLET
• CONTROL PRESSURE RANGES: 1/4" FNPT
• 0-250 PSIG (0-17.24 bar)
• 5-500 PSIG (0.34-34.47 bar) 1.73
• 5-800 PSIG (0.34-55.16 bar) 5.9
• 10-1500 PSIG (0.69-103.42 bar)
• 15-2500 PSIG (1.03-172.37 bar) PANEL MOUNTING NUT (OPTIONAL)
• 25-4000 PSIG (1.72-275.79 bar)
• 50-6000 PSIG (3.45-413.69 bar)
• 100-10000 PSIG (6.89-689.48 bar)

• Cv: 0.06, 0.20

MATERIALS OF CONSTRUCTION 60° VENT PORT
GAUGES 1/4-18 FNPT
• BODY:
• 303 Stainless Steel 1.50 (OPTIONAL)
• 316 Stainless Steel TYP
• 6061-T6 Aluminum, Nickel Plated (6000 psig max)
.60 1.25
• BONNET: MOUNTING HOLES
• 303 Stainless Steel (Non-wetted) 1.97 10-32 UNF .25, 2X

• VALVE STEM:
• 17-4 Stainless Steel

• OTHER WETTED PARTS:
• 316 Stainless Steel (with 316 stainless steel body option)
• 300 Series Stainless Steel (with all other body options)

• SENSOR PISTON & HOUSING:
• 17-4 Stainless Steel

• SEALS:
• Buna-N
• Viton®
• EPDM
• Low-temperature nitrile

• MAIN VALVE & VENT VALVE SEAT OPTIONS:
• Vespel®
• PEEK®
• PCTFE (aluminum body option only)

PORTING .50 TYP INLET/OUTLET
INLET
• STANDARD INLET: 1/4” FNPT 1/4" FNPT
• STANDARD OUTLET: 1/4” FNPT 10000 PSIG MAX
• GAUGE PORTS: 1/8” FNPT, 2X
• VENT PORT: 1/4” FNPT (P/N: 30-10466 shown above)

OPTIONAL ITEMS D/C: 172609

• Gauges (316 stainless steel wetted components,

304 stainless steel case, glycerine lled)
• Panel mounting configuration
• Private label

Vespel® and Viton® are registered trademarks of E.I.duPont de Nemours and Company
PEEK® is a registered trademark of Victrex PLC

ors, valves, and Torc Page 147
hes
Min 3560
r e g u l at MINIATURE, PNEUMATIC SERIES
USA HIGH PRESSURE, 10K
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

SERIES 1 -- 2 3 4 - 5 6 7
30-10466 --

1 VENT/MAIN VALVE SEAT 3 BODY MATERIAL 6 GAUGES/
MATERIAL & FINISH PORTING

1 Vespel Sp-1® 1 303 Stainless Steel 1 No gauges,
‘S’ porting

2 PEEK® 2 316 Stainless Steel 2 No gauges,
‘C’ porting
6061-T6 Aluminum,
3 PCTFE (Aluminum body only) 3 Include gauges,
3 Nickel plated ‘C’ porting

2 OUTLET 6000 psig max 4 No gauges,
PRESSURE ‘A’ porting
4 O-RING
1 0-250 psig 5 Include gauges,
(0-17.24 bar) MATERIAL ‘A’ porting

1 BUNA-N

2 5-500 psig 7 MOUNTING

(0.34-34.47 bar) 2 VITON®

3 5-800 psig 3 EPDM 1 Bottom mount only
(0.34-55.16 bar)

4 NITRILE, 2 Panel mounting
& bottom mount
4 10-1500 psig LO-TEMP
(0.69-103.42 bar)

15-2500 psig 5 FLOW
(1.03-172.37 bar) (Cv)
5

1 0.06

6 25-4000 psig 2 0.20

(1.72-275.79)

7 50-6000 psig
(3.45-413.69 bar)

8 100-10000 psig

(6.89-689.48 bar)

10000 PSIG MAX INLET D/C: 182803

e end user is responsible to ensure adequate ttings are used to connect regulator to plumbing.
Vespel® & Viton® are registered trademarks of E.I.duPont de Nemours and Company. PEEK® is a registered trademark of Victrex PLC
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 148
hes
Min 4300N
r e g u l at M I N I AT U R E SERIES
USA T WO S TAG E
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

(part number 50-12070 shown (part number 50-11422 shown (part number 50-12705 shown
above with optional C10 inlet adapter) above with integrated C10 inlet connection) above with tamper resistant acorn nut)

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 4300N Series adjustable, miniature, two stage • Precise, stable delivery pressure, even as the
(1st stage piston, 2nd stage diaphragm) pressure supply pressure decreases
reducing regulators, are designed for precise, low-flow
gas delivery. Their compact, two stage design provides • Low internal volume promotes quick gas flow
precise, stable delivery pressures even as the supply stabilization and purging
pressure decreases. Premier 4300N Series regulators
control inlet pressures up to 3000 PSIG (206.84 bar) • Models are available for both corrosive and
and have a flow capacity of Cv 0.04. non-corrosive service.

Premier 4300N Series regulators are available in a • Major components are available in numerous
wide variety of materials and configurations, making materials
them ideal for use in labs, industrial monitors,
disposable / transportable gas cylinders, and for the • Machined bar stock body, interstage, bonnet
regulation of a broad range of media. and piston eliminates porosity found in castings

• Numerous porting configurations are available
• Integral inlet filter
• Compact size (1¼ in. diameter x 5 in. high)
• Extremely light weight
• Very competitive pricing

e Premier 4300N Series pressure reducing regulator’s design is remarkably exible. D/C: 180805
Contact Premier Industries for a custom Premier 4300N Series regulator to meet your exact needs.

Page 149

ors, valves, and Torc
hes
Min
M I N I AT U R E r e g u l at
T WO S TAGE USA
4300N Pressure Reducing Regulators PREMIER INDUSTRIES
SERIES
neapolis M i n n e s o ta

S P E C I F I C AT I O N S OPTIONS

• MAXIMUM INLET PRESSURE: 3000 PSI (206.84 bar) • Inlet and/or Outlet Gauges
• OUTLET PRESSURE RANGES: • Anodized Colors for Aluminum Bodies and Bonnets
• Acorn nut for preset outlet pressures: P/N: 50-12705
• 0-10 PSIG (0 - 0.69 bar) • Private Label
• 0-50 PSIG (0 - 3.45 bar) • Other elastomers available upon request
• 0-100 PSIG (0 - 6.89 bar)
• LEAK RATE: Bubble Tight PREMIER INDUSTRIES
• WEIGHT: P/N XXXX
• Approx. 9 oz. for Aluminum INLET XXX PSIG
• Approx. 1.5 lbs for Brass and Stainless Steel
• FLOW CAPACITY (Cv): 0.04 0 60 4.9

MATERIALS OF CONSTRUCTION XXXX

• BODY OPTIONS: 0
• 303 Stainless Steel
• 6061-T6 Aluminum / Clear Anodized IN
Ø1.18
• BONNET:
• 6061-T6 Aluminum / Clear Anodized 1.3
• Nickel Plated Aluminum
(part number 50-10790 shown above)
• PISTON:
• SAE 360 Brass
• 303 Stainless Steel

• DIAPHRAGM:
• Neoprene
• Viton®

• PISTON SEALS:
• Neoprene
• Viton®

• VALVE SEATS: Teflon® & Neoprene
• INLET FILTER: 40 Micron Sintered 316 Stainless Steel

PORTING

• STANDARD INLET PORTING:
• 1/4" FNPT (standard)

• OPTIONAL INLET PORTING
• 1/8" FNPT
• C-10 (5/8"-18 UNF) (Integrated)
• All available CGA adapter connections

• STANDARD OUTLET PORTING:
• 1/8" FNPT (standard)

• OPTIONAL OUTLET ADAPTER CONNECTIONS:
• 1/8" Hose Barb
• 3/16" Hose Barb
• 1/4" Hose Barb

Viton® and Teflon® are registered trademarks of E.I.duPont de Nemours and Company D/C: 180805
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 150
hes
Min 4300S
r e g u l at M I N I AT U R E SERIES
USA T WO S TAG E
PREMIER INDUSTRIES Pressure Reducing Regulators

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 4300S Series adjustable, miniature, two • Elgiloy® diaphragm reduces gas
stage (1st stage piston, 2nd stage Elgiloy® contamination and diffusion
diaphragm) pressure reducing regulators, are
designed for high purity, low-flow gas delivery. • Precise, stable delivery pressure even as the
Their compact, two stage design provides precise, supply pressure decreases
stable delivery pressures even as the supply
pressure decreases. Premier 4300S Series • Low internal volume promotes quick gas flow
regulators are rated for inlet pressures up to 3000 stabilization and purging
PSIG (206.84 bar) and Cv 0.04.
• Models are available for both corrosive and
Premier 4300S Series regulators are available in a non-corrosive service.
wide variety of materials and configurations,
making them ideal for use in labs, industrial • Major components available in numerous
monitors, disposable / transportable gas cylinders, materials
and for the regulation of a broad range of media.
• Machined bar stock body, interstage body, bonnet
and piston eliminates porosity found in castings

• Optional acorn nut / preset outlet pressure
• Integral inlet filter
• Compact size (1.25 in. diameter x 4.7 in. high)
• Extremely light weight
• Very competitive pricing

Elgiloy® is a registered trademark of Elgiloy Specialty Metals Division, Combined Metals of Chicago L.L.C. D/C: 180410
e Premier 4300S Series pressure reducing regulator’s design is remarkably exible.

Contact Premier Industries for a custom Premier 4300S Series regulator to meet your exact needs.