Premier_Industries_Product_Catalog

Page 251

ors, valves, and Torc
hes
Min
3123 HIGH PRESSURE regulat
SERIES 15000 PSIG USA
Back Pressure Regulators PREMIER INDUSTRIES

neapolis M i n n e s ota

S P E C I F I C AT I O N S OPTIONAL ITEMS

• MAXIMUM INLET PRESSURE: 15000 PSIG (1034.21 bar) • Inlet gauge
• CONTROL PRESSURE RANGE: • Private label
• Panel mounting bracket (P/N: 30-10059)
• 300-15000 PSIG (20.68 - 1034.21 bar) • Panel mounting nuts with threaded body
• FLOW (Cv): 0.06, 0.14, or 0.20
• OPERATING TEMPERATURE: Ø3.24

• -15°F/-26°C to 165°F/74°C (BUNA-N)
• -4°F/-20°C to 165°F/74°C (VITON-A®)
• -65°F/-54°C to 165°F/74°C (EPDM)
• 15°F/-9°C to 165°F/74°C (AFLAS)
• -65°F/-54°C to 165°F/74°C (NITRILE)

MATERIALS OF CONSTRUCTION Ø1.75
6.5
• BODY :
• 316 Stainless Steel, 3.32 PROUDLY

• BONNET: MADE .72 TYP
• 17-4 Stainless Steel
IN USA 1/4 NPT GAUGE
• WETTED PARTS, OTHER: PORT (OPTIONAL)
• 316 Stainless Steel MAX. INLET
• 17-4 Stainless Steel 15000 PSIG
• PH15-7Mo Stainless Steel
ØA
• O-RINGS: (Ø2.12 MIN)
• BUNA-N IN
• AFLAS®
• Viton-A® M.P. & H.P. ONLY IN
• EPDM FLATS
• KALREZ® (Contact factory for pricing)
• Nitrile, Lo-temp OUT

• BACK-UP RINGS: PTFE or PCTFE Part number shown above: 30-10223
• VALVE SEAT:

• Vespel®
• PEEK®

PORTING

• INLET/OUTLET PORTING OPTIONS:

• 1/4”, 3/8” FNPT
• 1/4”, 3/8”, 9/16” Medium pressure
• 1/4”, 3/8” High pressure

BODY DIMENSIONS

PORT TYPE ØA FLATS
1/4 & 3/8 NPT Ø2.12
1/4” M.P. & H.P Ø2.12 1.98
3/8” M.P. Ø2.48 2.36
3/8” H.P. 2.78
9/16” M.P. Ø2.98 2.78
Ø2.98

Vespel® Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company D/C: 181306
AFLAS® is a regestered trademark of the Asahi Glass Co., Ltd.
PEEK® is a registered trademark of Victrex PLC

ors, valves, and Torc Page 252
hes
Min 3123
r e g u l at HIGH PRESSURE SERIES
USA
PREMIER INDUSTRIES 15000 PSIG
Back Pressure Regulators

neapolis M i n n e s o ta

SERIES -- 1 2 3 4 5 - 6 7 - 8
30-10223G - --

1 OUTLET PRESSURE 4 PORT TYPE 6 7 O-RINGS
(1/4” FNPT gauge port)

8 300-15000 PSIG 1 FNPT 00 BUNA-N
20.68-1034.21 Bar

2 PORTING CONFIGURATION 4 Medium Pressure 01 AFLAS®

5 High Pressure 02 VITON®
5 VALVE SEAT
G 05 EPDM

H OUT

IN

S OUT IN 11 KALREZ®
(Contact factory for pricing)
0 Vespel®
3 PORT SIZE 3 PEEK® 12 Nitrile, Low-temp

8 Cv (FLOW )

4 1/4”

6 3/8” 0 0.06
1 0.14
9 9/16” 2 0.20
(Only available in medium pressure)

15000 PSIG MAX INLET D/C: 181306

e end user is responsible to ensure adequate ttings are used to connect regulator to plumbing.
Kalrez® Vespel® & Viton® are registered trademarks of E.I.duPont de Nemours and Company
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd. PEEK® is a registered trademark of Victrex PLC
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 253
hes HIGH PRESSURE
Min AIR LOADED 3123AL
r e g u l at 15000 PSIG SERIES
USA Back Pressure Regulators
PREMIER INDUSTRIES

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

The high pressure, air loaded, Premier 3123AL Series • Compatible with electro-pneumatic controllers
back pressure regulators are single stage, piston sensed • 15000 PSIG (1034.21 bar) MAX
regulators, designed for inlet and outlet pressures up to • Cv 0.06, 0.14, or 0.20
15000 PSIG (1034.21 bar) and Cv 0.06, 0.14, or 0.20. • Economical pricing
• Machined bar stock body, bonnet and
Premier 3123AL Series Regulators are designed for
compatibility with electropneumatic controllers, piston eliminates porosity found in castings
enabling piloted pressure control from an inert gas at
low pressures (100 psig / 6.89 bar max air load).

Premier 3123AL Series regulators are used to regulate
a broad range of non-corrosive and corrosive media
(based on materials of construction).

e Premier 3123 Series pressure reducing regulator’s design is remarkably exible. D/C: 180204
Contact Premier Industries for a custom 3123 Series regulator to meet your exact needs.

HIGH PRESSURE Page 254
AIR LOADED
15000 PSIG ors, valves, and Torc
Back Pressure Regulators hes
Min
r e g u l at
USA
3123AL PREMIER INDUSTRIES
SERIES
neapolis M i n n e s o ta

S P E C I F I C AT I O N S OPTIONS

• MAX INLET PRESSURE: • Gauges
• REGULATOR: 15000 PSIG / 1034.21 bar (stainless steel) • Private label
• AIR ACTUATOR: 100 PSIG (6.89 bar) • Panel mounting bracket: P/N: 30-10059

• CONTROL PRESSURE RANGES: PREMIER INDUSTRIES
• 300-15000 PSIG (20.68 - 1034.21 bar) 100 PSIG MAX
Diameter: 0.312”
Area: 0.0765 in 1/4” NPTF PROUDLY
Ratio: / **
MADE
** 4.0” diameter diaphragm
Diaphragm area: 12.5664 in IN USA
• FLOW (Cv): 0.06, 0.14, or 0.20
• OPERATING TEMPERATURE: Ø5.38

• -15°F/-26°C to 165°F/74°C (BUNA-N) PREMIER INDUSTRIES 3.32
• -4°F/-20°C to 165°F/74°C (Viton®) 30-10223AL-8XXXX-XX 4.66
• -65°F/-54°C to 165°F/74°C (EPDM) MAX CONTROL PRESSURE
• 0°F/-17°C to 165°F/74°C (KALREZ®)
• 15°F/-9°C to 165°F/74°C (ALFAS) XXX00 PSIG
• -50°F/-45°C to 165°F/74°C (Nitrile, Low-temp)
1.44
MATERIALS OF CONSTRUCTION
ØA .72 TYP
• BODY OPTIONS : (Ø2.12 MIN)
• 316 Stainless Steel FLATS
IN
• HOUSING, AIR ACTUATOR:
• 6061-T6 Aluminum, Clear Anodized 1/4” NPT GAUGE
PORT (OPTIONAL)
• DIAPHRAGM, AIR ACTUATOR: IN
• Neoprene, nylon reinforced
OUT
• WETTED PARTS, OTHER:
• 316 Stainless Steel, BODY DIMENSIONS
• 17-4 Stainless Steel
• PH15-7Mo Stainless Steel PORT TYPE ØA FLATS
1/4 & 3/8 NPT Ø2.12
• O-RING SEALS: 1/4” M.P. Ø2.12 1.98
• Buna-N 1/4” H.P. Ø2.12 1.98
• Aflas® 3/8” M.P. Ø2.48 2.36
• Viton® 3/8” H.P. 2.78
• EPDM 9/16” M.P. Ø2.98 2.78
• Kalrez® (Contact factory for pricing) Ø2.98
• Nitrile, low-temperature
(P/N: 30-10223AL shown above)
• BACK-UP RINGS: PTFE, PCTFE
• MAIN VALVE SEAT: D/C: 180204

• Vespel®
• 17-4 H900 Stainless Steel
• 316 Stainless Steel
• PEEK®

PORTING

• INLET PORTING:
• 1/4” FNPT, medium pressure, high presssure
• 3/8” FNPT, medium pressure, high presssure
• 9/16” medium pressure

• OUTLET PORTING:
• 1/4” FNPT, medium pressure, high presssure
• 3/8” FNPT, medium pressure, high presssure
• 9/16” medium pressure

Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd
PEEK® is a registered trademark of Victrex PLC

ors, valves, and Torc HIGH PRESSURE Page 255
hes AIR LOADED
Min 15000 PSIG 3123AL
r e g u l at Back Pressure Regulators SERIES
USA
PREMIER INDUSTRIES

neapolis M i n n e s o ta

SERIES -- 1 2 3 4 5 - 6 7 - 8
30-10223AL - --

1 OUTLET PRESSURE 4 PORT TYPE 6 7 O-RINGS
(1/4” FNPT gauge port)

300-15000 PSIG Diameter: 0.312” 1 FNPT 00 BUNA-N

8 20.68-1034.21 Bar Area: 0.0765 in 4 Medium Pressure 01 AFLAS®

(stainless steel only) Ratio: / ** 5 High Pressure 02 VITON®
** 4.0” diameter diaphragm 5 VALVE SEAT
05 EPDM
Diaphragm area: 12.5664 in

2 PORTING CONFIGURATION

G 0 Vespel® 11 KALREZ®
(Contact factory for pricing)
H OUT

IN

S OUT IN 1 17-4 H900 12 Nitrile, Low-temp
Stainless Steel

2 316 Stainless Steel 8 Cv (FLOW )

3 PORT SIZE

3 PEEK® 0 0.06
1 0.14
4 1/4” 2 0.20

6 3/8”

9 9/16”
(Only available in medium pressure)

15000 PSIG MAX INLET D/C: 180204

e end user is responsible to ensure adequate ttings are used to connect regulator to plumbing.
Kalrez® Vespel® & Viton® are registered trademarks of E.I.duPont de Nemours and Company
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd. PEEK® is a registered trademark of Victrex PLC
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 256
hes
Min 5150
r e g u l at HIGH FLOW SERIES
USA PISTON SENSED
PREMIER INDUSTRIES Back Pressure Regulators

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 5150 low pressure, high flow, back • Cv: 5.0 max
pressure regulators rated for control pressures up • 200 PSIG (68.95 bar) max control pressure
to 200 PSIG (13.79 bar) and Cv 5.0 max. • Economical pricing
• Compact, non-rising stem
• Machined bar stock body eliminates porosity

found in castings

e Premier 5150 Series pressure reducing regulator’s design is remarkably exible. D/C: 182905
Contact Premier Industries for a custom 5150 Series regulator to meet your exact needs.

Page 257

ors, valves, and Torc
hes
Min
5150 HIGH FLOW r e g u l at
SERIES PISTON SENSED USA
Back Pressure Regulators PREMIER INDUSTRIES

neapolis M i n n e s o ta

S P E C I F I C AT I O N S 3.8 WEEP HOLE 1.00 OUTLET
WEEP HOLE CL 1/8" NPT TYP PORTS
• CONTROL PRESSURE RANGES: RANDOM ORIENTATION
• 0-25 PSIG (0-1.72 bar) INLET
• 0-50 PSIG (0-3.45 bar) 2.00 7.5
• 0-125 PSIG (0-8.62 bar) 1.00
• 0-200 PSIG (0-13.79 bar) MOUNTING HOLES 2.72
3/8-24 UNF - 2B
• FLOW COEFFICIENT (Cv): 5.0 max
.50 FULL THD
MATERIALS OF CONSTRUCTION 2X

• BODY OPTIONS: (Part number: 50-12800 shown above)
• 316 Stainless Steel
• 303 Stainless Steel
• 6061-T6 Aluminum, clear anodized

• SEALS & SEAT MATERIAL OPTIONS:
• Buna-n
• Viton®
• EPDM

• MAIN VALVE STEM:
• 17-4 Stainless Steel

PORTING

• STANDARD INLET:
• 3/4” FNPT

• STANDARD OUTLET:
• 3/4” FNPT

OPTIONS

• Private labeling

Viton® is a registered trademark of E.I.duPont de Nemours and Company D/C: 182305

ors, valves, and Torc Page 258
hes
Min 5150
r e g u l at HIGH FLOW SERIES
USA PISTON SENSED
PREMIER INDUSTRIES Back Pressure Regulators

neapolis M i n n e s o ta

PART NUMBER - 1 2 3 4 5

50-12800 -

1 BODY & SENSOR ASSEMBLY 4 CONTROL PRESSURE
1 6061-T6 Aluminum, Clear Anodize 1 0-25 PSIG (0-1.72 bar)
2 303 Stainless Steel 2 0-50 PSIG (0-3.45 bar)

3 316 Stainless Steel 3 0-125 PSIG (0-8.62 bar)
2 SEAL MATERIAL 4 0-200 PSIG (0-13.79 bar)
1 Buna-n 5 GAUGES
2 Viton® 0 None

3 EPDM
3 PORTING

1 3/4” FNPT

Viton® is a registered trademark of E.I.duPont de Nemours and Company D/C: 182304

ors, valves, and Torc Page 259
hes
Min 5150AL
r e g u l at HIGH FLOW, Cv 5.0 SERIES
USA LOW PRESSURE
PREMIER INDUSTRIES AIR LOADED
Back Pressure Regulators
neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier 5150AL Series air loaded, single stage, • Flow capacity (Cv): 5.0
high flow, low pressure, piston sensed, back • Compatible with electro pneumatic controllers
pressure regulators, designed for control pressures • Economical pricing
up to 600 PSIG (41.37 bar), and Cv 5.0. The • Machined bar stock body eliminates porosity
5150AL features an air loader with a max load
pressure of 100 PSIG (6.89 bar). found in castings

e Premier 5150AL Series pressure reducing regulator’s design is remarkably exible. D/C: 161310
Contact Premier Industries for a custom 5150AL Series regulator to meet your exact needs.

HIGH FLOW, Cv 5.0 Page 260
LOW PRESSURE
AIR LOADED ors, valves, and Torc
Back Pressure Regulators hes
Min
r e g u l at
USA
5150AL PREMIER INDUSTRIES
SERIES
neapolis M i n n e s o ta

S P E C I F I C AT I O N S AIRLOADER INLET
1/4-18 NPT
• CONTROL PRESSURE: 600 PSIG (41.37 bar)
• MAX AIR LOAD: 100 PSIG (6.89 bar) 1-1 1 NPT
• FLOW (Cv): 5.0 2
2X
MATERIALS OF CONSTRUCTION
INLET
• BODY OPTIONS:
• 316 Stainless Steel 3.685
• 303 Stainless Steel
• 6061-T6 Aluminum, Clear Anodize 5.38

• AIR LOADER HOUSING: 6061-T6 Aluminum 6.915
• PISTON: 316 Stainless Steel 8.947
• MAIN VALVE SEAT: Teflon®
• O-RINGS: Buna-n 1.985
• OTHER WETTED COMPONENTS:
3.97
• 316 Stainless Steel
• 17-4 Stainless Steel (Part number: 30-10230 shown above)

PORTING

• STANDARD INLET:
• 1-1½” NPT

• STANDARD OUTLET:
• 1-1½” NPT

• AIR ACTUATOR:
• 1/4” FNPT

OPTIONS

• Private labeling

Te on® is a registered trademark of E.I.duPont de Nemours and Company D/C: 161310

ors, valves, and Torc HIGH FLOW, Cv 5.0 Page 261
hes LOW PRESSURE
Min AIR LOADED 5150AL
r e g u l at Back Pressure Regulators SERIES
USA
PREMIER INDUSTRIES

neapolis M i n n e s o ta

PART NUMBER - 1

30-10230 -

1 BODY MATERIAL
OPTIONS

1 303 Stainless Steel

2 316 Stainless Steel

3 6061-T6 Aluminum

Contact facility for other
material options.

Contact factory for material certi cations. Fees may apply. D/C: 162806

ors, valves, and Torc Page 262
hes
Min 6100
r e g u l at H YDRAULIC SERIES
USA HIGH PRESSURE
PREMIER INDUSTRIES Back Pressure Regulators

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S
• Inlet/outlet pressures up to 10000 PSIG
The high pressure, hydraulic, Premier 6100 Series
are single stage, piston sensed, variable control (689.48 bar) max
pressure regulators, rated for inlet and outlet • Cv: 0.03, 0.06, 0.14, or 0.20
pressures up to 10000 PSIG (689.48 bar) and Cv • Economical pricing
0.03, 0.06, 0.14, or 0.20. • Multiple mounting options (bracket / panel nuts)
• Machined bar stock body, bonnet and
They are used to regulate to a broad range of
non-corrosive and corrosive media (based on piston eliminates porosity found in castings
materials of construction) Premier 6100 Series • Numerous materials & optional features available.
regulators can be supplied with a wide range of
inlet and outlet configurations.

e Premier 6100 Series pressure reducing regulator’s design is remarkably exible. D/C: 181210
Contact Premier Industries for a custom 6100 Series regulator to meet your exact needs.



















































Page 288

ors, valves, and Torc
hes
Min
PREMIER CR2500 SERIES r e g u l at
Changeover Regulator USA
CR2500 PREMIER INDUSTRIES

SERIES neapolis M i n n e s o ta

S P E C I F I C AT I O N S PANEL MOUNTING NUT
(OPTIONAL)
• MAXIMUM INLET PRESSURE: 3000 PSIG (206.84 bar)
• CONTROL PRESSURE RANGES: 1 7/16-20 UN PREMIER
MTG THREADS P/N XXXXXXX
• 80/120 PSIG (5.52/8.27 bar) INLET XXXXPSIG
• 130/170 PSIG (8.96/11.72 bar) OUTLET XXXPSIG
• 185/215 PSIG (12.76/14.82 bar)
• 235/265 PSIG (16.2/18.27 bar) 1/8" NPT CAPTURED BONNET 7.3
• FLOW (Cv): 0.08 RANDOM ORIENTATION

MATERIALS OF CONSTRUCTION Ø1.5

• BODY: XXX IN 0
• SAE 360 Brass 0 IN XXXX
• 316 Stainless Steel
• 6061-T6 Aluminum, Clear Anodized IN IN

• BONNET: 1/4-18 FNPT 1/4-18 FNPT
• SAE 360 Brass
OUT
• DIAPHRAGM: 316 Stainless Steel
• DIAPHRAGM SEAL: Teflon®
• MAIN VALVE SEAT: Teflon®

PORTING

• INLET PORTING:
• 1/4-18" FNPT (2 places)

• OUTLET PORTING:
• 1/8-27" FNPT

OPTIONS

• Panel Mounting Bonnet & Nut
• Private Label

1/8-27 FNPT INDICATOR IDENTIFYING
CYLINDER BEING USED
180° ROTATION TO CHANGEOVER

(Part Number: 50-11467 shown in drawings above)

Te on® and Viton® are registered trademarks of E.I.duPont de Nemours and Company D/C: 161710

ors, valves, and Torc Page 289
hes
Min CR2500
r e g u l at PREMIER CR2500 SERIES
USA Changeover Regulator SERIES
PREMIER INDUSTRIES

neapolis M i n n e s o ta

PART # -1 2
50-11467 -

1 BODY
MATERIAL

1 SAE 360 Brass

2 316 Stainless Steel

3 6061-T6 Aluminum,
Clear anodized

4 SAE 360 Brass,
Nickel Plated

2 OUTLET
PRESSURE

1 80/120 PSIG (5.52/8.27 bar)
2 130/170 PSIG (8.96/11.72 bar)

3 185/215 PSIG (12.76/14.82 bar)

4 235/265 PSIG (16.2/18.27 bar)

Contact factory for material certi cations. Fees may apply. D/C: 161710

ors, valves, and Torc Page 290
hes
Min CS2300
r e g u l at PREMIER CS2300 SERIES
USA Changeover panel with line regulator SERIES
PREMIER INDUSTRIES

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

0 XXX
OUT

OUT

XXX 0
0 XXXX

IN IN

IN

IN IN
PREMIER
P/N XXXXXXX
INLET XXXXPSIG
OUTLET XXXPSIG

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

The Premier CS2300 Series is an integrated • Premier changeover regulator
changeover system which combines our • Premier 2300 Series line regulator
changeover regulator and line regulator into a • Max inlet 3000 PSIG (206.84 bar)
compact, complete, wall mountable system for • Four max delivery pressures from 25 to 150 PSIG
smooth integration into your desired application.
Th Premier CS2300 changeover systems are (1.72 to 10.34 bar)
designed to provide a continuous flow of gas, • Optional Stainless steel braided teflon hose
preventing outages, fluctuations in pressure, and • Optional Stainless Steel mounting Bracket
wasted gas. When the primary gas source is
consumed, the changeover regulator automatically with 4 holes for 1/4” screws
draws from a secondary supply, whereafter the • Optional excess flow prevention valves
handknob should be turned to replenish the • Optional critical alert gauges
diminished supply (arrow pointing toward the line
in service). The built in line regulator ensures a
stable delivery pressure. The CS2500 features Cv
0.08 and a max inlet of 3000 PSIG (206.84 bar)
(dependent upon con guration).

e Premier changeover systems are remarkably exible. D/C: 151809
Contact Premier Industries for a custom changeover system to meet your exact needs.

valves, and Page 291

ors, Torc

hes
Min
PREMIER CS2300 SERIES regulat
Changeover panel with line regulator USA
CS2300 PREMIER INDUSTRIES

SERIES neapolis Minnesota

STANDARD COMPONENTS OPTIONS

• 1 - Premier changeover regulator • Excess flow prevention valves
• 1 - Premier 2300 Series, line regulator • CGA connections
• 2 - Panel Mounting Nuts • Stainless steel braided teflon hose
• Stainless steel mounting bracket
S P E C I F I C AT I O N S
with 4 holes for 1/4” screws
• MAXIMUM INLET PRESSURE: 3000 PSIG • Check valves in stainless steel or brass
• Gauges / critical alert gauges
(dependent upon conf iguration)
OUT
• LINE REGULATOR
CONTROL PRESSURE SETTINGS: Ø1.5 IN PREMIER
• 0-25 PSIG (0-1.72 bar) P/N XXXXXXX
• 0-50 PSIG (0-3.45 bar) INLET XXXXPSIG
• 0-100 PSIG (0-6.89 bar) OUTLET XXXPSIG
• 0-150 PSIG (0-10.34 bar)
7.3
• FLOW CAPACITY (Cv): .08 OUTLET GAUGE

MATERIALS OF CONSTRUCTION 0 XXX
OUT
• BODY:
• SAE 360 Brass OUT OUT
• 316 Stainless Steel 1/8" FNPT OUTLET 1/8" FNPT OUTLET
• 6061-T6 Aluminum/Clear Anodized
• SAE 360 Brass/Nickel Plated INLET GAUGE INLET GAUGE

• BONNET: XXX 0
• SAE 360 Brass 0 XXXX
• SAE 360 Brass/Nickel Plated
• 6061-T6 Aluminum/Clear Anodized IN IN
IN
• CHANGEOVER REGULATOR DIAPHRAGM: 1/4" FNPT INLET IN
• 316 Stainles Steel 1/4" FNPT INLET

• LINE REGULATOR DIAPHRAGM: (Part number: 50-11491 shown above)
• Neoprene

• CHANGEOVER REGULATOR MAIN VALVE SEAT:

• Teflon®
• LINE REGULATOR MAIN VALVE SEAT:

• Viton®
• GAUGES (Optional)

• 2” diameter inlet & outlet gauges,
stainless steel wetted gauges

• 2” diameter inlet & outlet gauges, chrome plated case,
brass wetted gauges

PORTING

• INLET PORTING:
• 1/4-18 FNPT (2 places)

• OUTLET PORTING:
• 1/8-27 FNPT

Teflon® and Viton® are registered trademarks of E.I.duPont de Nemours and Company D/C: 151809

ors, valves, and Torc Page 292
hes
Min CS2300
r e g u l at PREMIER CS2300 SERIES
USA Changeover panel with line regulator SERIES
PREMIER INDUSTRIES

neapolis M i n n e s o ta

PART # -1 2 3
50-11491 -

1 BODY
MATERIAL

1 SAE 360 Brass

2 316 Stainless Steel

3 6061-T6 Aluminum,
Clear anodized

4 SAE 360 Brass,
Nickel Plated

OUTLET

2 PRESSURE

1 0-25 PSIG (0-1.72 bar)
2 0-50 PSIG (0-3.45 bar)

3 0-100 PSIG (0-6.89 bar)

4 0-150 PSIG(0-10.34 bar)

FACTORY SET

3 RELIEF PRESSURE

IN PSIG / 10

C 2” diameter inlet & outlet
stainless steel wetted gauges

J 2” diameter inlet & outlet

chrome plated, brass wetted gauges

Contact factory for material certi cations. Fees may apply. D/C: 151208

ors, valves, and Torc Page 293
hes
Min CS2500
r e g u l at PREMIER CS2500 SERIES
USA Changeover panel with line regulator SERIES
PREMIER INDUSTRIES

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

The Premier CS2500 Series changeover system • 1 Premier changeover regulator
combines one Premier changeover regulator, and • 1 Premier 2500 series line regulator
one Premier 2500 Series line regulator into a • 2 Check valves in stainless steel or Brass
compact, wall mountable system. The Premier • 1 Stainless Steel mounting Bracket
CS2500 Series changeover system supplies a
continuous flow during cylinder changeover. with 4 holes for 1/4” screws
When the primary gas source is consumed, the • Stainless steel diaphragms minimize
changeover regulator automatically draws from a
secondary supply, thereby preventing outages, inboard diffusion
fluctuations in pressure, and wasted gas. The hand • Optional excess flow prevention valves
knob can be turned after the depletion of one gas • Optional integrated outlet shut off valve
source (arrow pointing towards the line currently • Optional critical alert gauges
in service) allowing you to safely replenish the
depleted source not in service. The built in line
regulator ensures a stable delivery pressure. The
CS2500 features Cv 0.08 and a max inlet of 3000
PSIG (206.84 bar) (dependent upon con guration).

e Premier changeover panels are remarkably exible. D/C: 151809
Contact Premier Industries for a custom changeover panel to meet your exact needs.

valves, and Page 294

ors, Torc

hes
Min
PREMIER CS2500 SERIES regulat
Changeover panel with line regulator USA
CS2500 PREMIER INDUSTRIES

SERIES neapolis Minnesota

STANDARD COMPONENTS OPTIONS

• 1 Premier changeover regulator • Excess flow prevention valves
• 1 Premier 2500 Series line regulator • Hoses
• 1 Stainless Steel mounting Bracket • CGA connections
• Gauges / critical alert gauges
with 4 holes for 1/4” screws • Integrated outlet shut off valve
• 2 Check valves in Stainless Steel or Brass
• Inlet shut off valves (stainless steel w/ Viton® seals)
S P E C I F I C AT I O N S
MOUNTING HOLES XXX INTEGRATED
• MAXIMUM INLET PRESSURE: 3000 PSIG FOR 1/4" SCREWS 0 SHUT-OFF VALVE
(dependent upon conf iguration) 4 PLACES
I NC R E A SE OUTLET
• STANDARD PRESET CONTROL PRESSURE: MOUNTING 1/4-18
• 0-10 PSIG (0-0.69 bar) BRACKET +- FNPT
• 0-25 PSIG (0-1.72 bar)
• 0-50 PSIG (0-3.45 bar) 5.25 TYP 2 XXX E DE C R E AS0CHECK VALVEBRAIDED
• 0-100 PSIG (0-6.89 bar) (BETWEEN MOUNTING HOLES) 0 EDE CR E AS XXXX H.P. HOSE
• 0-250 PSIG (0-17.24 bar)
• 0-500 PSIG (0-34.47 bar) CHECK VALVE

• Cv: 0.08 3.75 TYP 2 EXCESS FLOW
(BETWEEN MOUNTING PREVENTION VALVE
MATERIALS OF CONSTRUCTION BYPASS VALVE
HOLES)
• BODY: HP EXCESS FLOW INLET
• SAE 360 Brass PREVENTION VALVE
• 316 Stainless Steel
• 6061-T6 Aluminum, Clear Anodized CGA CONNECTION
• SAE 360 Brass, Nickel Plated
INLET
• BONNET:
• SAE 360 Brass MOUNTING HOLES 4.75
FOR 1/4" SCREWS 3.75
• DIAPHRAGMS: 316 Stainless Steel TYP 2
4 PLACES
• DIAPHRAGM SEALS: Teflon®
0 XXXX
• MAIN VALVE SEATS: Teflon®
• MOUNTING BRACKET: 1/4-18 FNPT I NCRE ASE
BOTH OUTLETS
• 304 Stainles Steel +-
• CHECK VALVE: @ 180° APART

• Stainless Steel (Standard) OUT OUT 6.75
• SAE 360 Brass
• (Optional) HOSE: 1/4-18 MNPT XXX 0
• Stainless steel braided teflon BOTH INLETS 0 XXXX
@ 180° APART
PORTING IN
IN
• INLET PORTING: 1/4-18 FNPT
• OUTLET PORTING: 1/4-18 FNPT 2.20
• CGA CYLINDER CONNECTIONS AVAILABLE:
(P/N: 50-11800 shown above
• CGA350 with shut o valves)
• CGA 590
• CGA 660 0.06
• CGA 705 BRACKET
• CGA 330 THICKNESS

(Part number: 50-12013 shown above)

Viton® is a registered trademark of E.I.duPont de Nemours and Company D/C: 151809
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 295
hes
Min M2500
r e g u l at PREMIER M2500 SERIES
USA Manifold with single stage regulator SERIES
PREMIER INDUSTRIES

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier M2500 manifolds provide easy point of • Premier 2500 Series, single stage regulator
use installation to one or two cylinders. Premier • Stainless Steel mounting Bracket
M2500 Series manifolds are available in both
stainless steel and brass, to accommodate use with with 4 holes for 1/4” screws
a broad range of non-corrosive and corrosive • Check valve(s) (standard)
media. • Optional pigtails/hoses

Standard M2500 Series manifolds include: one (for service to one or two cylinders)
2500 Series single stage regulator, one stainless
steel mounting bracket, check valve(s), and • Optional integrated Shut Off Valve
optional excess flow prevention valves, hoses, • Optional CGA inlet connections
integrated shut off valves and cga connections. • Optional excess flow prevention valves
The M2500 Series manifold provides everything • Optional critical alert gauges
you need in one compact assembly.

Premier manifolds are remarkably exible. D/C: 151809
Contact Premier Industries for a custom manifold to meet your exact needs.

valves, and Page 296

ors, Torc

hes
Min
PREMIER M2500 SERIES regulat
Manifold with single stage regulator USA
M2500 PREMIER INDUSTRIES

SERIES neapolis Minnesota

STANDARD COMPONENTS REGULATOR

• 1 Premier 2500 Series, two stage regulator CHECK VALVE
• 1 Stainless Steel mounting Bracket
INCLOEXMTX:PXXAXXNXXYXXXNPXASXMIGXE
with 4 holes for 1/4” screws OUTLET: XXX PSIG
• Check valve(s) in brass or stainless steel
MOUNTING BRACKET

S P E C I F I C AT I O N S

• MAXIMUM INLET PRESSURE: 3000 PSIG (206.84 bar)

(dependent upon conf iguration)

• STANDARD PRESET CONTROL PRESSURE:

• 0-100 PSIG

(0-6.89 bar) XXXX 0 CHECK VALVE
• MAX PROCESS FLOW RATE: 3.5 SLPM 0 XXXX
MOUNTING HOLES
FOR 1/4" SCREWS I N C R E A SE
4 PLACES

MATERIALS OF CONSTRUCTION RESET +-
OPERATE
E DE CR EAS
MAX 200 PSIG

OPTIONAL

• BODY OPTIONS: EXCESS FLOW
PREVENTION VALVE
• body diameters of 1.5”, 1.75”, and 2.0”
INTEGRATED 3.76 TYP 2 OPTIONAL
• SAE 360 Brass, Bright Dip SHUT-OFF VALVE (BETWEEN MOUNTING EXCESS FLOW
PREVENTION VALVE
• SAE 360 Brass, Nickel Plated HOLES)

• 316 Stainless Steel

• SEALS:

• PTFE

• Viton A®

• MOUNTING BRACKET: (Part number: 50-12099 shown above)
• 304 Stainles Steel

• PIGTAIL/HOSE OPTIONS:

• Single cylinder

• Dual cylinder

• CHECK VALVE:

• SAE 360 Brass, Viton® Seal (Standard)

• Stainless Steel

PORTING

• INLET PORTING:
• 1/4-18 FNPT

• CYLINDER CONNECTIONS AVAILABLE:
• CGA 350,590, 660, 705, 330, 580

• OUTLET PORTING:
• 1/4-18 FNPT

OPTIONS

• Excess flow prevention valves
• CGA connections
• Hose pigtails (for service to one or two cylinders)
• Integrated shut-off valve
• Gauges / critical alert gauges

Viton® is a registered trademark of E.I.duPont de Nemours and Company D/C: 161710
Contact factory for material certi cations. Fees may apply.

ors, valves, and Torc Page 297
hes
Min M4500
r e g u l at PREMIER M4500 SERIES
USA Manifold with two stage regulator SERIES
PREMIER INDUSTRIES

neapolis M i n n e s o ta

PREMIER INDUSTRIES

1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020

MADE IN THE USA

Minneapolis, MN

DESCRIPTION F E AT U R E S

Premier M4500 manifolds provide easy point of • Premier 4500 Series, two stage regulator
use installation to one or two cylinders. Premier • Stainless Steel mounting Bracket
M4500 Series manifolds are available in both
stainless steel and brass, to accommodate use with with 4 holes for 1/4” screws
a broad range of non-corrosive and corrosive • Check valve(s) (standard)
media. • Optional pigtails/hoses

Standard M4500 Series manifolds include: one (for service to one or two cylinders)
4500 Series two stage regulator, one stainless steel
mounting bracket, one check valve, and optional • Optional integrated Shut Off Valve
excess flow prevention valves, hoses, integrated • Optional CGA inlet connections
shut off valves and cga connections. The M4500 • Optional excess flow prevention valves
Series manifold provides everything you need in • Optional critical alert gauges
one compact assembly.

Premier manifolds are remarkably exible. D/C: 151809
Contact Premier Industries for a custom manifold to meet your exact needs.

valves, and Page 298

ors, Torc

hes
Min
PREMIER M4500 SERIES regulat
Manifold with two stage regulator USA
M4500 PREMIER INDUSTRIES

SERIES neapolis Minnesota

STANDARD COMPONENTS 1.25 TYP 2 (BETWEEN MOUNTING HOLES)

• 1 Premier 4500 Series, two stage regulator MOUNTING HOLES XXX 0 CHECK VALVE
• 1 Stainless Steel mounting Bracket 0 XXXX
FOR 1/4" SCREWS
with 4 holes for 1/4” screws 4 PLACES
• Check valve(s) in brass or stainless steel
I NC R E ASE
S P E C I F I C AT I O N S
RESET +-
• MAXIMUM INLET PRESSURE: 3000 PSIG OPERATE
(206.84 bar) E DE CR E AS
MAX 200 PSIG
(dependent upon conf iguration)
• CONTROL PRESSURE RANGES: OUTLET A A
1/8-27 OPTIONAL
• 1-25 PSIG (0.07-1.72 bar) MNPT L.P. EXCESS FLOW
• 1-50 PSIG (0.07-3.45 bar)
• 5-100 PSIG (0.34-6.89 bar) PREVENTION
• FLOW (Cv): 0.08 VALVE

INTEGRATED 3.75 TYP 2 OPTIONAL
SHUT-OFF VALVE (BETWEEN MOUNTING HOLES) H.P. EXCESS FLOW
PREVENTION VALVE
BRAIDED H.P. HOSE
INLET

MATERIALS OF CONSTRUCTION (Part number: 50-12015 shown above)

• BODY & BONNET OPTIONS: 3.75 TYP 2
• SAE 360 Brass, Bright Dip (BETWEEN MOUNTING HOLES)
• SAE 360 Brass, Electroless Nickel Plated
• 316 Stainless Steel 1.25 XXX 0
TYP 2 0 XXXX
• DIAPHRAGM OPTIONS:
• Neoprene OUTLET I NC R E A SE
• 316 Stainless Steel 1/4-18
FNPT +-
• SEALS:
• PTFE MOUNTING HOLES E DE CR E AS
• Viton A® FOR 1/4" SCREWS
4 PLACES AA
• MOUNTING BRACKET:
• 304 Stainles Steel INTEGRATED
SHUT-OFF VALVE
• PIGTAIL/HOSE OPTIONS:
• Single cylinder INLET
• Dual cylinder
INLET
• CHECK VALVE OPTIONS:
• SAE 360 Brass, Viton® Seal (Standard)
• Stainless Steel

PORTING CHECK VALVE

• INLET PORTING: 2.20 MOUNTING
• 1/4-18 FNPT BRACKET

• CYLINDER CONNECTIONS AVAILABLE: VIEW A-A
• CGA 350,590, 660, 705, 330
.06 BRACKET
• OUTLET PORTING: THICKNESS
• 1/4-18 FNPT
(Part number: 50-12012 shown above)
OPTIONS

• Excess flow prevention valves
• CGA connections
• Hose pigtails (for service to one or two cylinders)
• Integrated shut-off valve
• Gauges / critical alert gauges

Viton® is a registered trademark of E.I.duPont de Nemours and Company D/C: 161710
Contact factory for material certi cations. Fees may apply.

Page 299

VALVES

Premier o ers an assortment of high quality proprietary valves
designed for use in a variety of industries worldwide. All of our
valves are machined from barstock materials for superior quality
and reliability. If you do not see a valve in our standard series
that meets your needs, please contact us for a custom design or
modi cation.

299 www.premierind.us

Page 300

VA LV ES

NAME DESCRIPTION PAGE

AO.8 Valves Air operated, Normally Open / Normally Closed
High Pressure Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .301
Excess Flow Miniature, high pressure, and high sensitivity
Va l v e s excess ow valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 4
Stainless Steel Manual Stainless Steel
Shut O Valves Shut O Valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 8
Miniature Brass Miniature, Brass,
Shut O Valves Manual Shut O Valves. . . . . . . . . . . . . . . . . . . . . . . . . . . .312
Flow Sight Needle Style Shut O Valve
Tube Va lves with acrylic ow meter. . . . . . . . . . . . . . . . . . . . . . . . . . . . .314

300 www.premierind.us