Page 151
ors, valves, and Torc
hes
Min
M I N I AT U R E r e g u l at
T WO STAGE USA
4300S Pressure Reducing Regulators PREMIER INDUSTRIES
SERIES
neapolis M i n n e s o ta
S P E C I F I C AT I O N S PORTING
• MAXIMUM INLET PRESSURE: 3000 psig (206.84 bar) • INTEGRATED INLET PORTING:
• OUTLET PRESSURE RANGES: • 1/4" FNPT (Standard)
• 1/8" FNPT
• 0-10 PSIG (0 - 0.69 bar)
• 0-50 PSIG (0 - 3.45 bar) • OPTIONAL INLET ADAPTER CONNECTIONS:
• 0-100 PSIG (0 - 6.89 bar) • C-10 (5/8"-18 UNF)
• All available CGA Connections
**Other pressure ranges available upon request
• LEAK RATE: Bubble Tight • INTEGRATED OUTLET PORTING:
• WEIGHT: • 1/8" FNPT (Standard)
• Approx. 9 oz. for Aluminum • OPTIONAL OUTLET ADAPTER CONNECTIONS:
• Approx. 1.5 lbs for Brass and Stainless Steel • 1/8" MNPT
• FLOW CAPACITY (Cv): 0.04 • 1/8" Hose Barb
• 3/16" Hose Barb
MATERIALS OF CONSTRUCTION • 1/4" Hose Barb
• BODY OPTIONS: OPTIONS
• SAE 360 Brass / Nickel Plated (Standard)
• 303 Stainless Steel • Gauges: Chrome plated steel case with brass socket or
• 316 Stainless Steel stainless steel wetted
• 6061-T6 Aluminum / Nickel Plated
• Monel® available upon request • Optional acorn nut / preset outlet pressure: P/N: 50-11676
(rated for inlet pressures up to 5000 psig / 344.7 bar)
• BONNET:
• SAE 360 Brass / Nickel Plated (Standard) • Private Label
• 316 Stainless Steel
• 6061-T6 Aluminum / Nickel Plated A
• Monel® available upon request
Ø1.25 INLET: 3000 PSI
• PISTON: OUTLET: XX PSIG
• SAE 360 Brass (Standard) 1/4" FNPT 0 3000 0 XX
• 303 Stainless Steel (Standard)
• Monel® available upon request 4.7 A
• 2ND STAGE DIAPHRAGM: I NCR E ASE VIEW A-A
• Elgiloy®
+-
• PISTON SEAL OPTIONS:
• Viton® E DE C R E AS
• BUNA-N
• Neoprene 120º 1/8" FNPT OUTLET
2.4 (Standard)
• MAIN VALVE SEAT: Teflon®/Viton®
(Part Number: 50-10364 shown above)
ORDERING/PART NUMBERS
• Standard, 10 PSIG (0.69 bar) outlet: 50-10364-1
• Standard, 50 PSIG (3.45 bar) outlet: 50-10364-2
• Standard, 100 PSIG (6.89 bar) outlet: 50-10364-3
• Non-Standard: part # assigned per requirements
Elgiloy® is a registered trademark of Elgiloy Specialty Metals Division, Combined Metals of Chicago L.L.C. D/C: 180410
Viton® & Teflon are registered trademarks of E.I.duPont de Nemours and Company
Contact factory for material certi cations. Fees may apply.
ors, valves, and Torc Page 152
hes
Min 4500
r e g u l at T WO S TAG E SERIES
USA DIAPHRAGM SENSED
PREMIER INDUSTRIES Pressure Reducing Regulators
neapolis M i n n e s o ta
PREMIER INDUSTRIES
1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020
MADE IN THE USA
Minneapolis, MN
DESCRIPTION F E AT U R E S
Premier 4500 Series regulators share the same features as • Very competitive pricing
Premier 2500 Series regulators, except, the 4500 Series
regulators two stage design offers more precise outlet • Compact versions available with body
pressure control and a significantly decreased supply diameter of 1.5 in. x 5.5 in. long
pressure effect (decaying inlet characteristic). These
diaphragm sensed regulators control inlet pressures up to • Machined bar stock body eliminates porosity
3000 PSIG (206.84 bar); they are available with a flow found in castings
capacity of Cv 0.08 or 0.2, and either a stainless steel or
neoprene diaphragm. Premier 4500 Series regulators are • Reduced particle contamination with 15
available in 316 stainless steel, brass, nickel plated brass, micron valve cartridge filter
and aluminum.
• Stable set pressures as cylinder pressure is
Typical applications include: cylinder bottle applications, reduced
gas and liquid chromatography, high purity carrier gases,
zero, span, and calibration gases, lecture bottle • Interstage relief valve
applications, research and development labs, low flow
purge systems, and industrial controls. • Stainless diaphragm option minimizes
inboard diffusion of air into regulator
• Captured bonnet vent (standard)
e Premier 4500 Series pressure reducing regulator’s design is remarkably exible. D/C: 162707
Contact Premier Industries for a custom 4500 Series regulator to meet your exact needs.
Page 153
ors, valves, and Torc
hes
Min
4500 T WO S TAGE r e g u l at
SERIES DIAPHRAGM SENSED USA
Pressure Reducing Regulators PREMIER INDUSTRIES
neapolis M i n n e s o ta
S P E C I F I C AT I O N S AA
Ø1.75
• MAXIMUM INLET PRESSURE: 3000 PSIG (206.84 bar)
• CONTROL PRESSURE RANGES: PANEL MOUNTING NUT 7.4
(OPTIONAL)
• 0-10 PSIG (0 - 0.69 bar)
• 0-25 PSIG (0 - 1.72 bar) 1 7/16-20 UN
• 0-30 PSIG (0 - 2.07 bar) MTG THREADS
• 0-50 PSIG (0 - 3.45 bar)
• 0-100 PSIG (0 - 6.89 bar) 1/8" NPT
• 0-250 PSIG (0 - 17.24 bar) RANDOM
• FLOW (Cv): 0.08, or 0.2 ORIENTATION
MATERIALS OF CONSTRUCTION Ø2.0
GAUGES (OPTIONAL)
• BODY OPTIONS:
• SAE 360 Brass, Bright Dip XXX 70º 0
• SAE 360 Brass, Electroless Nickel Plated
• 316 Stainless Steel 0 3000
• 6061-T6 Aluminum, Clear Anodized 55º 55º
• BONNET OPTIONS: OUT I NCRE ASE IN
• SAE 360 Brass, Bright Dip
• SAE 360 Brass, Electroless Nickel Plated 1/4-18 NPT 1/4-18 NPT
• 303 Stainless Steel
• 6061-T6 Aluminum, Clear Anodized OUT +- IN
• DIAPHRAGM OPTIONS: 1/4-18 NPT E DE CR E AS 1/4-18 NPT
• 316 Stainless Steel E DE C R E AS
INTERSTAGE VIEW A-A
• STAINLESS DIAPHRAGM SEAL: Teflon® RELIEF VALVE
• MAIN VALVE SEAL: Teflon®
• VALVE SEAT: Teflon® VIEW FOR OPTIONAL INTERNAL
• FIRST STAGE RELIEF VALVE SEAL: Viton® OU TLET SHU T OFF VALVE
PORTING
• INLET PORTING OPTIONS:
• 1/8" FNPT
• 1/4" FNPT
• All CGA Connections Available:
– CGA 165, 180, 320, 350, 510, 540, 580, etc.
• OUTLET PORTING OPTIONS:
• 1/8" FNPT
• 1/4" FNPT
OPTIONS XXX 70º 0
• Gauges GAUGES 55º 0 XXXX
• Piston sensed first stage (OPTIONAL)
• Hand knob styles 55º
• Panel mounting bonnet & nut(s)
• Outlet shut off valve OUT I NCRE AS IN
• Private labeling 1/4-18 NPT 1/4-18 NPT
• Anodized colors for aluminum bodies & bonnets
OUT +- IN
1/4-18 NPT 1/4-18 NPT
VIEW A-A
OUTLET SHUT OFF VALVE
Te on® and Viton® are registered trademarks of E.I.duPont de Nemours and Company (Part number: 50-11494 shown in drawings above)
Monel® is a registered trademark of Special Metals Corporation.
D/C: 181207
ors, valves, and Torc Page 154
hes
Min 4500
r e g u l at T WO S TAG E SERIES
USA DIAPHRAGM SENSED
PREMIER INDUSTRIES Pressure Reducing Regulators
neapolis M i n n e s o ta
PART # -1 2 3 4 5 6 7 8
50-11494 -
1 BODY + BONNET 3 GAUGES 6 INTERNAL OUTLET
MATERIAL & FINISH (optional) SHUT OFF VALVE (optional)
316 Stainless Steel, Blank no gauges Blank None (standard)
cleaned per spec #515 (standard)
2 SAE 360 Brass, S Internal outlet shut o valve
Nickel plated 2” diameter,
6061-T6 Aluminum, A inlet only, 7 PORT SIZE
clear anodized
3 6061-T6 Aluminum, stainless steel wetted gauges
clear anodized 2” diameter,
SAE 360 Brass, B outlet only, Blank 1/4” ports (standard)
brass wetted gauges
5 nickel plated 2” diameter, 8 1/8” ports 1/4” (standard)
SAE 360 Brass,
nickel plated C inlet & outlet,
stainless steel wetted gauges
8 SbSSBArAAriiEgEEghh3t3t366d6D000ipiBpBBrrraaassss,ss,, 2” diameter, 8 MAIN VALVE
Cv
bright dip F inlet & outlet,
Blank Cv 0.08 (standard)
brass wetted gauges
316 Stainless Steel, 2” diameter,
inlet & outlet,
9 cleaned per spec #515 J brass wetted/ Y Cv 0.20 w/o lter (hydraulic service)
303 Stainless Steel
cleaned per spec #515 chrome plated gauges
PANEL MOUNTING Z Cv 0.20
NUT (optional)
2 OUTLET PRESSURE 4
(outlet gauge range, if supplied)
0 0 - 10 PSIG / 0 - 0.69 bar 5 Mounting nut
(per application) 8 No nut (standard)
1 0 - 25 PSIG / 0 - 1.72 bar PORTING
(0-30 PSIG gauge) OPTIONS
5
0 - 50 PSIG / 0 - 3.45 bar
2 (0-60 PSIG gauge)
3 0 - 100 PSIG / 0 - 6.89 bar C
(0-160 PSIG gauge)
(Standard, 1/4” inlet, 1/4” outlet)
4 0 - 250 PSIG / 0 - 17.24 bar
(0-400 PSIG gauge) D
5 0 - 30 PSIG / 0 - 2.07 bar I
N
O
Contact factory for material certi cations. Fees may apply. D/C: 181008
ors, valves, and Torc T WO S TAG E Page 155
hes HIGH PRESSURE
Min PISTON SENSED 4600
r e g u l at Pressure Reducing Regulators SERIES
USA
PREMIER INDUSTRIES
neapolis M i n n e s o ta
PREMIER INDUSTRIES
1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020
MADE IN THE USA
Minneapolis, MN
DESCRIPTION F E AT U R E S
Premier 4600 Series high pressure, two stage regulators • Cv: 0.06 standard, 0.20 optional
offer precise and stable outlet pressures despite variations • Stable set pressures as cylinder pressure is
in supply pressure. These piston sensed regulators are
designed for inlet pressures up to 6000 PSIG (413.69 bar); reduced
and Cv 0.06 standard, 0.20 optional. • Piston sensed
• Max inlet pressure: 6000 psig / 413.69 bar
• Machined bar stock body eliminates porosity
found in castings
e Premier 4600 Series pressure reducing regulator’s design is remarkably exible. D/C: 170203
Contact Premier Industries for a custom 4600 Series regulator to meet your exact needs.
T WO STAGE Page 156
HIGH PRESSURE
PISTON SENSED ors, valves, and Torc
Pressure Reducing Regulators hes
Min
4600 r e g u l at
SERIES USA
PREMIER INDUSTRIES
neapolis M i n n e s o ta
S P E C I F I C AT I O N S OUT I NCR E ASE INSTG
E
• MAXIMUM INLET PRESSURE: 6000 psig / 413.69 bar OUT
• CONTROL PRESSURE RANGES: IN DE CR E AS 1/4-18 FNPT 2X
1/4-18 FNPT 2X
• 0-700 PSIG (0-48.26 bar)
• 0-800 PSIG (0-55.16 bar) +-
• 0-1000 PSIG (0-68.95 bar)
• 0-1500 PSIG (0-103.42 bar) IN Ø1.88
• FLOW (Cv): 0.06 standard, 0.20 optional
Ø1.73
MATERIALS OF CONSTRUCTION
PREMIER INDUSTRIES
• BODY: P/N 50-12281-X-XX
• 316 Stainless Steel
6000 PSIG MAX INLET
• BONNET: XX00 PSIG OUT
• 303 Stainless Steel
3.25 PROUDLY 1/4-18 NPT PORTS
• VALVE STEM: 7.1 (4X)
• 17-4 Stainless Steel MADE
IN
• 1 STAGE VALVE SEAT:
• Vespel® USA
• 2 STAGE VALVE SEAT: IN
• PCTFE
• SEAL OPTIONS:
• Viton®
• SENSOR & SENSOR HOUSING:
• 17-4 Stainless Steel
PORTING (Part Number: 50-12281 shown in drawings above
with optional low pro le hand knob)
• INLET PORTING:
• 1/4" NPT
• OUTLET PORTING:
• 1/4" NPT
OPTIONS
• Gauges
• Private labeling
• Low profile hand knob (fluted knob standard)
Vespel® and Viton® are registered trademarks of E.I.duPont de Nemours and Company D/C: 171104
ors, valves, and Torc Page 157
hes
Min 4700
regulat M I NI AT U RE, T WO STAGE SERIES
USA PISTON SENSED, FIXED FLOW
PREMIER INDUSTRIES Pressure Reducing Regulators
neapolis Minnesota
PREMIER INDUSTRIES
1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020
MADE IN THE USA
Minneapolis, MN
DESCRIPTION F E AT U R E S
The Premier 4700 Series regulators are: compact, • Precise, stable delivery pressure and flow, even as
two stage, piston sensed, fixed pressure & flow, supply pressure decreases
pressure reducing regulators. The compact,
two-stage design, allows for precise and stable • Compact size (1.2 in. diameter x 4.6 in. high)
delivery pressures, even as the supply pressure • Factory adjustable preset (fixed) flow settings
decreases. Premier 4700 Series regulators are • Numerous porting configurations available
designed to control pressures up to 3000 PSIG • 40 micron sintered 316 stainless steel
(206.84 bar) (dependent upon con guration).
They are commonly used for: integral inlet filter
• Models are available for both corrosive and
• Calibration gases
• Industrial hygiene monitors non-corrosive service.
• Research and development labs • Economical pricing
• Regulating a broad range of media • Machined bar stock body, bonnet and pistons
compatible with materials of construction. eliminates porosity found in castings
• Optional yoke style design
e Premier 4700 Series pressure reducing regulator’s design is remarkably exible. D/C: 160512
Contact Premier Industries for a custom 4700 Series regulator to meet your exact needs.
valves, and Page 158
ors, Torc
hes
Min
M I NI AT URE , T WO STAGE regulat
PISTON SENSED, FIXED FLOW USA
4700 Pressure Reducing Regulators PREMIER INDUSTRIES
SERIES
neapolis Minnesota
S P E C I F I C AT I O N S 1/4" HOSE BARB 4.4
Ø1.2
• MAXIMUM INLET PRESSURE: 3000 PSIG (206.84 bar) PREMIER INDUSTRIES
• CONSTANT FLOW PRESET: Per customer requirements P/N: 50-11806-XX
• LEAK RATE: Bubble Tight
• INLET SHUT OFF VALVE: None (shown) INLET: XXXX PSIG MAX
FLOW: X.X SLPM
• Rotary/Multi-turn optional
• Bayonet/Toggle optional
MATERIALS OF CONSTRUCTION 0 3000
• BODY & BONNET: 1/4" FNPT
• SAE 360 Brass INLET
• SAE 360 Brass, Electroless Nickel Plated
• 303 Stainless (Part number: 50-11806 shown above)
• 6061-T6 Aluminum, Clear Anodized
1.56
• PISTON: .91
• SAE 360 Brass
• 303 Stainless Steel
• PISTON SEALS:
• Viton®
• Other elastomers available
• VALVE SEAT: Teflon®
• INLET FILTER: 40 micron sintered 316 Stainless Steel
PORTING CGA 973 0 3000
5.5
• INLET PORTING:
• C10 (5/8-18 UNF) 3000 PSIG
• 1/8" FNPT INLET GAUGE
• 1/8" MNPT,
• 1/4" FNPT DICAL SCOTT MEDICAL
• 1/4" MNPT 23 50-12523
PSIG MAX
• OUTLET PORTING: SLPM INLET: XXXX PSIG MAX
• 1/4" Hose barb FLOW: X.X SLPM
• 3/16" Hose Barb
• 1/8" Hose barb
• 1/8" FNPT
• 1/8" MNPT
• 1/4" FNPT
• 1/4" MNPT
OPTIONS Ø.98
• Inlet and/or Outlet Gauges Ø1.69 4MM TUBE
• Anodized Colors for Aluminum Bodies CONNECTOR
OUTLET
and Bonnets
• Private Label
• CGA inlet connection
• Yokestyle design: P/N 50-12523
(Part number: 50-12523 shown above)
Te on® and Viton® are registered trademarks of E.I.duPont de Nemours and Company D/C: 160512
Contact factory for material certi cations. Fees may apply.
ors, valves, and Torc Page 159
hes
Min 4700
regulat LIVEWELL, OXYGEN INJECTION SERIES
USA T WO S TAG E, F IX ED F LOW
PREMIER INDUSTRIES Pressure Reducing Regulators
neapolis Minnesota
PREMIER INDUSTRIES
1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020
MADE IN THE USA
Minneapolis, MN
DESCRIPTION F E AT U R E S
Premier's 4700 Series Livewell Oxygen Injection Regulator • Engineered specifically for livewell oxygen injection
is a compact, two stage, piston sensed, fixed flow, pressure
reducing regulator. This 4700 series regulator was developed • Very competitive pricing
in cooperation with the Texas Parks & Wildlife • Factory preset (fixed) flow setting of 0.1 LPM
Department's Inland Fisheries team in San Antonio. Their • Compact size (1.2 in. diameter x 6.2 in. high)
research shows that "dissolved oxygen is the single most • Machined bar stock body, and bonnet eliminates
important factor for keeping bass alive."**
The Livewell Oxygen Injection Regulator is all aluminum porosity found in castings
with a brass CGA 540 inlet connection for a secure • Inlet Filter: 40 micron 316 stainless steel
attachment to oxygen cylinders. The two stage design • 0-3000 PSIG inlet gauge w/ stainless steel case
insures the consistent delivery of the recommended flow of
oxygen at all cylinder pressures. Your fish will be getting all & brass socket
the oxygen they need and you'll be maximizing the life of
every oxygen cylinder. The rugged stainless steel cased inlet
gauge will constantly show the amount of oxygen remaining
in the cylinder.
The article link at the bottom of this page has a substantial
amount of valuable information about livewell management.
It also contains a link to a slideshow demonstrating the
proper set-up of a livewell oxygenation system.
e Premier 4700 Series regulator’s design is remarkably exible. D/C: 161210
Contact Premier Industries for a custom 4700 Series regulator to meet your exact needs.
** Randy Myers and Jason Driscoll, Inland Fisheries Division Texas Parks and Wildlife Department, June 2011
http://www.tpwd.state.tx.us/ shboat/ sh/didyouknow/inland/livewells.phtml
ors, valves, and Page 160
Torc
hes
Min
LIVEWELL, OXYGEN INJECTION regulat
T WO STAGE , F IX ED F LOW USA
4700 Pressure Reducing Regulators PREMIER INDUSTRIES
SERIES
neapolis Minnesota
S P E C I F I C AT I O N S 1/4" HOSE BARB
• MAXIMUM INLET PRESSURE: 3000 PSIG PREMIER INDUSTRIES
• PRESET OUTLET PRESSURE: 30 ± 5 PSIG P/N: 50-11530-XX
• FLOW: 0.1 SLPM
• LEAK RATE: Bubble Tight INLET: XXXX PSIG MAX
• SHUT OFF VALVE: None FLOW: X.X SLPM
• WEIGHT: 0.25 lbs
6.2
MATERIALS OF CONSTRUCTION
0 3000
• BODY:
• 6061-T6 Aluminum, Clear Anodized CGA 540 INLET
CONNECTION
• BONNET:
• 6061-T6 Aluminum, Clear Anodized Ø1.2
2.1
• PISTON:
• SAE 360 Brass 50Ͳ11530Ͳ01
2 STAGE REGULATOR SET@ 0.10 SLPM
• PISTON SEALS:
• EPDM FLOW (SLPM) 0.110
0.105
• VALVE SEAT: 0.100
• Teflon® 0.095
0.090
PORTING
2500
• INLET PORTING: 1/4”FNPT
• CGA 540 connection
• OUTLET PORTING:
• 1/4" hose barb
ORDERING
• Part Number: 50-11530-01
2000 1500 1000 500 0
INLET PRESSURE (PSIG)
Te on® and Viton® are registered trademarks of E.I.duPont de Nemours and Company D/C: 153007
Contact factory for material certi cations. Fees may apply.
ors, valves, and Torc HIGH FLOW, Page 161
hes
Min HIGH PRESSURE, 5000
r e g u l at PISTON SENSED SERIES
USA Pressure Reducing Regulators
PREMIER INDUSTRIES
neapolis M i n n e s o ta
PREMIER INDUSTRIES
1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020
MADE IN THE USA
Minneapolis, MN
DESCRIPTION F E AT U R E S
• High flow (Cv 2.0 or 1.0)
The Premier 5000 Series regulators are high flow,
piston sensed, pressure reducing regulators, • 4500 PSIG (310.26 bar) max inlet
designed for inlet pressures up to 4500 PSIG
(310.26 bar), outlet pressures of 0-2500 PSIG • Non-venting
(0-172.37 bar) with a Cv of 2.0 or 1.0.
• Very competitive pricing
Designs are available with adjustable or preset • Machined bar stock body, bonnet and
outlet pressures. Premier 5000 Series regulators
are used to regulate to a broad range of piston eliminates porosity found in castings
non-corrosive and corrosive media (based on
materials of construction).
e Premier 5000 Series pressure reducing regulator’s design is remarkably exible. D/C: 180205
Contact Premier Industries for a custom 5000 Series regulator to meet your exact needs.
Page 162
ors, valves, and Torc
hes
Min
5000 HIGH FLOW, r e g u l at
SERIES USA
HIGH PRESSURE, PREMIER INDUSTRIES
PISTON SENSED
Pressure Reducing Regulators neapolis M i n n e s o ta
S P E C I F I C AT I O N S 5.7 PREMIER INDUSTRIES PREMIER I
• MAXIMUM INLET PRESSURE : 4500 PSIG (310.26 bar) PART #50-11969 PART #
• CONTROL PRESSURE RANGES: INLET: 4500 PSIG MAX INLET: 450
OUTLET: 150 PSIG OUTLET: 15
• 0-850 PSIG (0-58.61 bar)
• 0-2500 PSIG (0-172.37 bar) 3.4 1/2-14 FNPT
• Cv: 2.0, 1.0 OUTLET
• LEAK RATE : Bubble tight
OUT
MATERIALS OF CONSTRUCTION
2.07
• BODY: 303 Stainless Steel
• BONNET: 303 Stainless Steel 1.30 IN IN 1.30
• SEALS: MAX IN 4500 PSIG MAX IN
• Viton® Ø2.48 1/2-14 FNPT INLET
• MAIN VALVE SEAT: Vespel® 4500 PSIG MAX
• WETTED PARTS: 300 Series Stainless Steel
• HAND KNOB: 6061-T6 Aluminum SE INCREASE+ - D
PORTING ECREA
• INLET PORTING:
P/N shown above: 50-11969 (Cv 2.0)
• 1/2-14 NPT
• 1/4-18 FNPT 2.20
• OUTLET PORTING: 5.7
• 1/2-14 NPT
• 1/4-18 FNPT .81
OPTIONS 2.00
• Private label P/N shown above: 50-12403 (Cv 1.0)
• Cv 1.0: P/N: 50-12403
• Cv 2.0: P/N: 50-11969
Vespel® & Viton® are registered trademarks of E.I.duPont de Nemours and Company D/C: 151108
Contact factory for material certi cations. Fees may apply.
ors, valves, and Torc Page 163
hes
Min 5033DL
r e g u l at HIGH FLOW SERIES
USA DOME LOADED
PREMIER INDUSTRIES Pressure Reducing Regulators
neapolis M i n n e s o ta
PREMIER INDUSTRIES
1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020
MADE IN THE USA
Minneapolis, MN
DESCRIPTION F E AT U R E S
Premier 5033DL Series dome loaded, single stage, • Flow capacity (Cv): 3.3
high flow, piston sensed, pressure reducing • 6000 PSIG (413.69 bar) max inlet pressure
regulators, designed for inlet pressures up to 6000 • Piston Sensed
PSIG (413.69 bar), and Cv 3.3. The 5033DL • 1:1 dome load
features an externally loaded 1:1 dome load with a • Optional external sensing port
max outlet pressure of 6000 PSIG (413.69 bar). • Economical pricing
Optional external sensing port for improved • Machined bar stock body eliminates porosity
accuracy.
found in castings
e Premier 5033DL Series pressure reducing regulator’s design is remarkably exible.
Contact Premier Industries for a custom 5033DL Series regulator to meet your exact needs.
D/C: 181705
Page 164
ors, valves, and Torc
hes
Min
HIGH FLOW r e g u l at
DOME LOADED USA
5033DL Pressure Reducing Regulators PREMIER INDUSTRIES
SERIES
neapolis M i n n e s o ta
S P E C I F I C AT I O N S 2.368
• MAXIMUM INLET PRESSURE: 6000 PSIG (413.69 bar) 6.739
• MAXIMUM OUTLET PRESSURE: 6000 PSIG (413.69 bar) 3.768
• FLOW (Cv): 3.3
2.980
MATERIALS OF CONSTRUCTION 1.125
• BODY:
• 316 Stainless Steel
• PISTON:
• 316 Stainless Steel
• MAIN VALVE:
• 17-4 Stainless Steel
• MAIN VALVE SEAT OPTIONS:
• PCTFE
• Vespel®
• O-RING OPTIONS:
• BUNA-N
• Viton®
• BACK-UP RINGS:
• PTFE
PORTING
• STANDARD INLET:
• 3/4 FNPT
• STANDARD OUTLET:
• 3/4 FNPT
• EXTERNAL SENSING PORT (OPTIONAL):
• 1/4 AS5202
• DOME PORT:
• 1/4 FNPT
OPTIONS
• Private Label
(Part number: 30-10429 shown above)
Viton® is a registered trademark of E.I.duPont de Nemours and Company D/C: 181705
ors, valves, and Torc Page 165
hes
Min 5033DL
r e g u l at HIGH FLOW SERIES
USA DOME LOADED
PREMIER INDUSTRIES Pressure Reducing Regulators
neapolis M i n n e s o ta
PART NUMBER - 1 2 3 4
30-10429 -
1 SEAT MATERIAL 4 PORTS
OPTIONS 1 3/4” FNPT
1 PCTFE
2 Vespel®
2 O-RING MATERIAL
OPTIONS
1 Buna-N
2 Viton®
3 BODY MATERIAL
1 316 Stainless Steel
Viton® & Vespel® are registered trademarks of E.I.duPont de Nemours and Company D/C: 181705
ors, valves, and Torc Page 166
hes
Min 5050
r e g u l at HIGH FLOW SERIES
USA DIAPHRAGM SENSED
PREMIER INDUSTRIES Pressure Reducing Regulators
neapolis M i n n e s o ta
PREMIER INDUSTRIES
1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020
MADE IN THE USA
Minneapolis, MN
DESCRIPTION F E AT U R E S
Premier 5050 preset, single stage, high flow, • Flow capacity (Cv): 5.0
diaphragm sensed, pressure reducing regulators, • 1000 PSIG (68.95 bar) max inlet pressure
designed for inlet pressures up to 1000 PSIG • Balanced stem for increased outlet pressure
(68.95 bar), preset outlet pressures up to 100 psig
(6.89 bar) and Cv 5.0. stability
• Diaphragm sensed
• Preset outlet pressures
• Non-venting
• Economical pricing
• Compact size
• Machined bar stock body eliminates porosity
found in castings
e Premier 5050 Series pressure reducing regulator’s design is remarkably exible. D/C: 180205
Contact Premier Industries for a custom 5050 Series regulator to meet your exact needs.
Page 167
ors, valves, and Torc
hes
Min
5050 HIGH FLOW r e g u l at
SERIES DIAPHRAGM SENSED USA
Pressure Reducing Regulators PREMIER INDUSTRIES
neapolis M i n n e s o ta
S P E C I F I C AT I O N S 2.75
OUTLET
• MAXIMUM INLET PRESSURE: 1000 PSIG (68.95 bar) 1" FNPT
• PRESET OUTLET PRESSURE: (SEE PART# FOR
PRESSURE SETTING)
• 100 psig (6.89 bar) MAX
INLET
• FLOW (Cv): 5.0 1" FNPT
1000 PSIG MAX
MATERIALS OF CONSTRUCTION
7.0
• BODY: 1.74
• 316 Stainless Steel
• 303 Stainless Steel INLET/OUTLET
• Monel 400®
• 6061-T6 Aluminum, clear anodized (Part number: 50-12560 shown above)
• BONNET (NON-WETTED):
• 303 Stainless Steel
(for 316 stainless steel & 303 stainless steel body options)
• 6061-T6 Aluminum, clear anodized
(for aluminum clear anodized body option)
• 316 Stainless Steel
(for Monel 400® body option)
• MAIN VALVE SEAT:
• Buna-n
• Viton®
• DIAPHRAGM:
• Buna-n
• Viton®
• VALVE SPRING:
• 316 Stainless Steel (303 stainless steel, 316 stainless steel body,
and Aluminum body)
• Elgiloy® (Monel® body)
• O-RINGS:
• Buna-n
• Viton®
PORTING
• STANDARD INLET:
• 1” FNPT
• STANDARD OUTLET:
• 1” FNPT
OPTIONS
• Private labeling
• Dome loaded model
• Dome loaded model with bias spring
Viton® is a registered trademark of E.I.duPont de Nemours and Company D/C: 183101
Elgiloy® is a registered trademark of Elgiloy Special Metals Division, Combined Metals of Chicago L.L.C
Monel® is a registered trademark of Special Metals Corporation
ors, valves, and Torc Page 168
hes
Min 5050
r e g u l at HIGH FLOW SERIES
USA
PREMIER INDUSTRIES DIAPHRAGM SENSED
Pressure Reducing Regulators
neapolis M i n n e s o ta
PART NUMBER - 1 2 - X X X
50-12560 - -
1 BODY / PROCESS WETTED PRESET OUTLET PRESSURE
COMPONENT MATERIALS
Specify preset outlet pressure setting in
1 303 Stainless Steel Body / “XXX” psig. 100 psig maximum setting.
316 Stainless Steel Valve Spring
(Examples, use “025” for 25 psig outlet setting,
2 316 Stainless Steel Body / “075” is 75 psig outlet setting)
316 Stainless Steel Valve Spring
Outlet setting will be made at maximum rated
inlet pressure unless speci ed otherwise when
ordered.
3 Monel 400® Body **/
Elgiloy® Valve Spring
Aluminum, Clear Anodize/
4 316 Stainless Steel Valve Spring
& 300 Series main valve components
2 SEALS / SEAT / DIAPHRAGM
MATERIAL
1 Buna-n
2 Viton®
**Non-wetted, metal components are 316 Stainless Steel for Monel 400® wetted component option D/C: 183101
Viton® is a registered trademark of E.I.duPont de Nemours and Company
Elgiloy® is a registered trademark of Elgiloy Special Metals Division, Combined Metals of Chicago L.L.C
Monel® is a registered trademark of E.I.duPont de Nemours and Company
ors, valves, and Torc Page 169
hes
Min 5050DL
r e g u l at HIGH FLOW SERIES
USA DOME LOADED
PREMIER INDUSTRIES Pressure Reducing Regulators
neapolis M i n n e s o ta
PREMIER INDUSTRIES
1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020
MADE IN THE USA
Minneapolis, MN
DESCRIPTION F E AT U R E S
Premier 5050DL Series dome loaded, single stage, • Flow capacity (Cv): 5.0
high flow, diaphragm sensed, pressure reducing • 1000 PSIG (68.95 bar) max inlet pressure
regulators, designed for inlet pressures up to 1000 • Balanced stem for increased outlet pressure
PSIG (68.95 bar), and Cv 5.0. The 5050DL
features a 1:1 dome load with a max load pressure stability
of 100 PSIG (6.89 bar). Balanced stem design • Diaphragm sensed
significantly reduces supply pressure effect. • 1:1 dome load
• Economical pricing
• Compact size
• Non-venting
• Machined bar stock body eliminates porosity
found in castings
e Premier 5050DL Series pressure reducing regulator’s design is remarkably exible. D/C: 180205
Contact Premier Industries for a custom 5050DL Series regulator to meet your exact needs.
Page 170
ors, valves, and Torc
hes
Min
HIGH FLOW r e g u l at
DOME LOADED USA
5050DL Pressure Reducing Regulators PREMIER INDUSTRIES
SERIES
neapolis M i n n e s o ta
S P E C I F I C AT I O N S INLET
1.74 1" FNPT
• MAXIMUM INLET PRESSURE: 1000 PSIG (68.95 bar)
• OUTLET PRESSURE RANGE: 1000 PSIG MAX
3.73
• 0-100 PSIG (0-6.89 bar)
• MAX DOME LOAD: 100 PSIG (6.89 bar) 2.75
• LOAD RATIO: 1:1** DOME LOADING PORT
1/4" FNPT
** an additional 3-5 psig dome load is required to maintain a 50 PSIG MAX
1:1 outlet pressure to dome load ratio.
(INLET) OUTLET
• FLOW (Cv): 5.0 1" FNPT
0-50 PSIG
MATERIALS OF CONSTRUCTION
(Part number: 50-12456 shown above)
• BODY, BONNET, BACK CAP:
• 316 Stainless Steel
• 303 Stainless Steel
• 6061-T6 Aluminum, Clear Anodize
• DIAPHRAGM:
• Buna-N
• DIAPHRAGM PLATE:
• 316 Stainless Steel
• MAIN VALVE SEAT:
• Buna-N
• MAIN VALVE:
• 316 Stainless Steel
• O-RINGS:
• Buna-N
PORTING
• STANDARD INLET:
• 1” FNPT
• STANDARD OUTLET:
• 1” FNPT
• DOME LOAD PORT:
• 1/4” FNPT
OPTIONS
• Private labeling
• Dome loaded bias design
• Spring loaded design
• Air loaded design
D/C: 161210
ors, valves, and Torc Page 171
hes
Min 5050DL
r e g u l at HIGH FLOW SERIES
USA DOME LOADED
PREMIER INDUSTRIES Pressure Reducing Regulators
neapolis M i n n e s o ta
PART NUMBER - 1
50-12456 -
1 BODY MATERIAL
& FINISH
1 6061-T6 Aluminum,
Clear Anodize
2 303 Stainless Steel,
Cleaned per spec #515
3 316 Stainless Steel,
Cleaned per spec #515
Contact facility for other
material options.
Contact factory for material certi cations. Fees may apply. D/C: 163006
ors, valves, and Torc HIGH FLOW Page 172
hes DOME LOAD
Min WITH SPRING BIAS 5050DLB
r e g u l at Pressure Reducing Regulators
USA SERIES
PREMIER INDUSTRIES
neapolis M i n n e s o ta
PREMIER INDUSTRIES
1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020
MADE IN THE USA
Minneapolis, MN
DESCRIPTION F E AT U R E S
Premier 5050DLB Series dome loaded / • Flow capacity (Cv): 5.0
bias spring, single stage, high flow, diaphragm • 1000 PSIG (68.95 bar) max inlet pressure
sensed, pressure reducing regulators. Premier • Adjustable spring bias pressure
5050DLB Series regulator feature inlet pressures • Diaphragm sensed
up to 1000 PSIG (68.95 bar), Cv 5.0, maximum • Non-venting
dome load of 100 PSIG (6.89 bar) and a preset • Compact size
bias pressure. 5050DLB Series regulators are • Machined bar stock body eliminates porosity
designed for tracking applications, where a
constant differential pressure is desired. found in castings
e Premier 5050DLB Series pressure reducing regulator’s design is remarkably exible. D/C: 180205
Contact Premier Industries for a custom 5050DLB Series regulator to meet your exact needs.
HIGH FLOW Page 173
DOME LOAD
WITH SPRING BIAS ors, valves, and Torc
Pressure Reducing Regulators hes
Min
r e g u l at
USA
5050DLB PREMIER INDUSTRIES
SERIES neapolis M i n n e s o ta
S P E C I F I C AT I O N S 6.5
• MAXIMUM INLET PRESSURE: 1000 PSIG (68.95 bar)
• MAX DOME LOAD: 100 PSIG (6.89 bar)
• OUTLET PRESSUE: dome load pressure + bias pressure
• FLOW (Cv): 5.0
MATERIALS OF CONSTRUCTION 1.74
• BODY, BONNET, BACK CAP: DOME LOADING PORT4.7 OUTLET
• 316 Stainless Steel 1/8" FNPT 1" FNPT
• 303 Stainless Steel 100 PSIG MAX (DOME PRESSURE
• 6061-T6 Aluminum, Clear Anodize
+ SPRING BIAS PRESSURE)
• DIAPHRAGM:
• Buna-N SPRING BIAS ADJUSTING
SCREW AND LOCKIN NUT
• DIAPHRAGM PLATE:
• 316 Stainless Steel
• MAIN VALVE SEAT:
• Buna-N
• MAIN VALVE:
• 316 Stainless Steel
• O-RINGS:
• Buna-N
• DOME LOAD BIAS SPRING:
• 302 Stainless Steel
PORTING
• STANDARD INLET:
• 1” FNPT
• STANDARD OUTLET:
• 1” FNPT
• DOME LOAD PORT:
• 1/8” FNPT
OPTIONS
• Private labeling
2.75
(Part number: 50-12510 shown above)
D/C: 163006
ors, valves, and Torc HIGH FLOW Page 174
hes DOME LOAD
Min WITH SPRING BIAS 5050DLB
r e g u l at Pressure Reducing Regulators
USA SERIES
PREMIER INDUSTRIES
neapolis M i n n e s o ta
PART NUMBER - 1 - 2 3
50-12510 - -
1 BODY/BONNET/BACK CAP 2 3 SPRING BIAS
MATERIAL & FINISH
Specify spring bias pressure in “XX” psig
1 6061-T6 Aluminum, (Examples, ‘05” is 5 psig spring bias,
Clear Anodize ‘12’ is 12 psig spring bias)
2 303 Stainless Steel,
Cleaned per spec #515
3 316 Stainless Steel,
Cleaned per spec #515
Contact factory for material certi cations. Fees may apply. D/C: 161210
ors, valves, and Torc Page 175
hes
Min 5060DL
r e g u l at HIGH FLOW SERIES
USA DOME LOADED
PREMIER INDUSTRIES Pressure Reducing Regulators
neapolis M i n n e s o ta
PREMIER INDUSTRIES
1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020
MADE IN THE USA
Minneapolis, MN
DESCRIPTION F E AT U R E S
Premier 5060DL Series dome loaded, single stage, • Flow capacity (Cv): 6.0
high flow, piston sensed, pressure reducing • 6000 PSIG (413.69 bar) max inlet pressure
regulators, designed for inlet pressures up to 6000 • Piston Sensed
PSIG (413.69 bar), and Cv 6.0. The 5060DL • 1:1 dome load
features an externally loaded 1:1 dome load with a • Optional external sensing port
max outlet pressure of 6000 PSIG (413.69 bar). • Economical pricing
Optional external sensing port for improved • Machined bar stock body eliminates porosity
accuracy.
found in castings
e Premier 5060DL Series pressure reducing regulator’s design is remarkably exible.
Contact Premier Industries for a custom 5060DL Series regulator to meet your exact needs.
D/C: 181705
Page 176
ors, valves, and Torc
hes
Min
HIGH FLOW r e g u l at
DOME LOADED USA
5060DL Pressure Reducing Regulators PREMIER INDUSTRIES
SERIES
neapolis M i n n e s o ta
S P E C I F I C AT I O N S 2.368
• MAXIMUM INLET PRESSURE: 6000 PSIG (413.69 bar) 6.739
• MAXIMUM OUTLET PRESSURE: 6000 PSIG (413.69 bar) 3.768
• FLOW (Cv): 6.0
2.980
MATERIALS OF CONSTRUCTION
• BODY:
• 316 Stainless Steel
• PISTON:
• 316 Stainless Steel
• MAIN VALVE:
• 17-4 Stainless Steel
• MAIN VALVE SEAT:
• Vespel®
• O-RING OPTIONS:
• BUNA-N
• Viton®
• BACK-UP RINGS:
• PTFE
PORTING
• STANDARD INLET:
• 3/4 FNPT
• STANDARD OUTLET:
• 3/4 FNPT
• EXTERNAL SENSING PORT (OPTIONAL):
• 1/4 AS5202
• DOME PORT:
• 1/4 FNPT
OPTIONS
• Private Label
1.125
(Part number: 30-10609 shown above)
Viton® is a registered trademark of E.I.duPont de Nemours and Company D/C: 181705
ors, valves, and Torc Page 177
hes
Min 5060DL
r e g u l at HIGH FLOW SERIES
USA DOME LOADED
PREMIER INDUSTRIES Pressure Reducing Regulators
neapolis M i n n e s o ta
PART NUMBER - 1 2 3 4
30-10609 -
1 SEAT MATERIAL 4 PORTS
OPTIONS 1 3/4” FNPT
1 Vespel®
2 O-RING MATERIAL
OPTIONS
1 Buna-N
2 Viton®
3 BODY MATERIAL
1 316 Stainless Steel
Viton® is a registered trademark of E.I.duPont de Nemours and Company D/C: 181705
PEEK® is a registered trademark of Victrex PLC
ors, valves, and Torc Page 178
hes
Min 6000
r e g u l at HYDRAULIC SERIES
USA
PREMIER INDUSTRIES HIGH PRESSURE
Pressure Reducing Regulators
neapolis M i n n e s o ta
PREMIER INDUSTRIES
1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020
MADE IN THE USA
Minneapolis, MN
DESCRIPTION F E AT U R E S
The hydraulic, high pressure Premier 6000 Series • Piston Sensed
pressure reducing regulators are piston sensed, • Main valve cartridge
variable pressure & delivery regulators, designed • Captured vent
for inlet and outlet pressures up to 10000 PSIG • Black anodized aluminum knob
(689.48 bar). 6000 Series regulators feature a wide • Machined bar stock body, bonnet and piston
range of inlet and outlet configurations, Cv: 0.06,
0.12, or 0.2, adjustable captured venting, and eliminates porosity found in castings
compatibility with a broad range of non-corrosive • Very competitive pricing
and corrosive media (based on materials of • Numerous optional features available
construction). • NACE MR0175 compatible materials are available
• Dome loaded, and air loaded options available.
• 15000 PSIG (1034.21 bar) models available
e Premier 6000 Series pressure reducing regulator’s design is remarkably exible. D/C: 181210
Contact Premier Industries for a custom 6000 Series regulator to meet your exact needs.
Page 179
ors, valves, and Torc
hes
Min
HYDRAULIC r e g u l at
USA
6000 HIGH PRESSURE PREMIER INDUSTRIES
SERIES Pressure Reducing Regulators
neapolis M i n n e s o ta
S P E C I F I C AT I O N S PANEL NU T PANEL MOUNTING
ST YLE BRACKET STYLE
• MAXIMUM INLET PRESSURE:
• 10000 PSIG (689.5 Bar) (STAINLESS STEEL, standard)
• 6000 PSIG (413.69 Bar) (BRASS)
• CONTROL PRESSURE RANGES:
• 0-200 PSIG (0-13.8 Bar)
• 5-500 PSIG (0.35-34.5 Bar)
• 5-800 PSIG (0.35-55.2 Bar)
• 10-1500 PSIG (0.69-103.4 Bar)
• 15-2500 PSIG (1.0-172.4 Bar) 2.500 HEX
Ø2 ¼-14 UN PANEL NUT 2X
• 25-4000 PSIG (1.7-275.8 Bar) (Ø2 ∕ PANEL HOLE) Ø2.120
6.9
• 50-6000 PSIG (3.4-413.7 Bar) PREMIER INDUSTRIES
• 100-10000 PSIG (6.9-689.5 Bar) P/N 30-10203-XXXXX-XX
• FLOW CAPACITY XX000 PSIG MAX INLET
• Main Valve Cv: 0.06, 0.12, or 0.20
• Vent Valve Cv: 0.06 XX00 PSIG OUT
• DESIGN PROOF PRESSURE: 150% maximum rated 2.03
3.77 PROUDLY
MADE
IN
USA
• OPERATING TEMPERATURE:**
• -15°F/-26°C to 165°F/74°C (BUNA-N)
• -4°F/-20°C to 165°F/74°C (Viton®) XX000 PSIG .59
• -65°F/-54°C to 165°F/74°C (EPDM) MAX IN 1.19
• 0°F/-17°C to 165°F/74°C (KALREZ®)
• 15°F/-9°C to 165°F/74°C (ALFAS)
• -50°F/-45°C to 165°F/74°C (Nitrile, Lo-temp) (Part Number: 30-10203 shown above)
MATERIALS OF CONSTRUCTION .81 ØA PORT TYPE ØA FLATS
• BODY: IN
• 316 Stainless Steel (standard)
• SAE 360 Brass NPT, NPTF Ø2.48
• BONNET: 17-4 Stainless Steel FLATS 1/4” OTHER Ø2.48 2.36
• PISTON: 316 Stainless Steel
• VENT/MAIN VALVE STEM: 17-4 Stainless Steel, hardened 1/4” & 3/8” SAE Ø2.98 2.81
• VALVE SEAT: 17-4 Stainless Steel, hardened
• VENT VALVE SEAT: 316 Stainless Steel 3/8” M.P. Ø2.98 2.81
• WETTED PARTS: NACE compliant 316 Stainless Steel & Elgiloy®
• SEALS: Viton®, Buna-N, EPDM, AFLAS, Nitrile (Lo-Temp), Kalrez® OUT 1/2” SAE Ø3.23 2.98
• BACK-UP RINGS: PTFE & PCTFE
1/4" VENT PORT 9.16” M.P. Ø3.23 2.98
PORTING
*Bodies w/ ‘L’ porting con gurations and 3/8”
• INLET & OUTLET PORT OPTIONS: ports and larger require a larger ØA
• 1/4" FNPT, SAE J1926, SAE AS5202**, NPTF or medium pressure
• 3/8" FNPT, SAE J1926, SAE AS5202**, NPTF or medium pressure OP TIONAL PANEL OPTIONAL
• 1/2" FNPT, SAE J1926, SAE AS5202**, or NPTF MOUNTING BRACKET ACORN NUT
• 9/16" medium pressure
1/4-20 UNC-2B
• VENT PORT: 2X
• 1/4" FNPT, SAE J1926, SAE AS5202**, NPTF, or medium pressure
• GAUGE PORTS: 1/4" FNPT
OPTIONAL ITEMS (Ø2.120)
(Ø2.80)
• Additional Ports: Inlet, Outlet and/or Gauge (Ø3.5)
• Air loaded design (P/N: 30-10219)
• Gauges D/C: 182606
• Private label
• Non-venting
(Part Number: 30-10059 shown above)
**SAE AS5202 supersedes MS33649
Viton® & Kalrez® are registered trademarks of E.I.duPont de Nemours and Company. Elgiloy® is a registered trademark of Elgiloy Specialty Metals
Division, Combined Metals of Chicago LLC (Contact factory for Kalrez® pricing)
**For extended temperature ranges please contact Premier Industries. Above temperature ranges will apply to the majority of media for which the material is
recommended. Temperature ranges can vary with some media, ALWAYS TEST UNDER SERVICE CONDITIONS.
ors, valves, and Torc Page 180
hes
Min 6000
r e g u l at HYDRAULIC SERIES
USA HIGH PRESSURE
PREMIER INDUSTRIES Pressure Reducing Regulators
neapolis M i n n e s o ta
PART # 1 2 - 3 4 5 6 7 - 8 9 MODS
30-10203 --
1 2 MOUNTING STYLE 5 PORTING 7 PORT TYPE M O D I F I C AT I O N S
CONFIG. IN/OUT/VENT
Blank None
MB Mounting bracket A G IN 1 NPT
style body OUT
PN Panel nut style body C GG 2 SAE J1926 BN cN(B46o1rA0m3a0sC.p6s0Ea9bptoibsMbidaglryeR/mo0pa1xt7i)5on
(panel nuts included) L* OUT IN
Brass body
3 OUTLET G IN 3 SAE AS5202 (MS33649**)
PRESSURE P TBU P(6o0r0t 0typpseigu/niform
OUT
G 413.69 bar max)
0 0-200 PSIG S OUT IN 4 MEDIUM P TU Port type uniform
(0-13.8 Bar) PRESSURE
1 5-500 PSIG *L porting con gurations with 3/8” 6 NPTF
(0.34-34.5 Bar) ports and larger require a larger
body diameter
5-800 PSIG **SAE AS5202 supersedes MS33649 ANT Acorn nut
(0.34-55.2 Bar) PORT SIZE
2
6
3 10-1500 PSIG 8 9 O-RINGS 10000 PSIG MAX INLET: e end
(0.69-103.4 Bar) user is responsible to ensure adequate
4 1/4”
ttings are used to connect regulator
15-2500 PSIG 00 BUNA-N to plumbing.
(1.0-172.4 Bar)
4
6 3/8” 01 AFLAS®
02 VITON®
5 25-4000 PSIG
(1.7-275.8 Bar)
8 1/2”**
6 50-6000 PSIG 05 EPDM
(3.4-413.7 Bar)
9 9/16”**
100-10000 PSIG 11 KALREZ®
**1/2” ports not available
7 (6.9-689.5 Bar) in medium pressure (Contact factory for pricing)
(stainless steel only) **9/16” ports only available 12 NITRILE,
in medium pressure
4 MAIN VALVE Cv Gauge ports: 1/4” FNPT LO-TEMP
0 Cv 0.06
1 Cv 0.12
2 Cv 0.20
Vent Valve Cv: 0.06
Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company. Kel-F® is a registered trademark of 3M Company D/C: 181508
AFLAS® is a registered trademark of Asahi Glass Co., Ltd
Contact factory for material certi cations. Fees may apply.
ors, valves, and Torc Page 181
hes
Min 6000AL
r e g u l at AIR LOADED SERIES
USA
PREMIER INDUSTRIES HIGH PRESSURE
HYDRAULIC
neapolis M i n n e s o ta Pressure Reducing Regulators
PREMIER INDUSTRIES
1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020
MADE IN THE USA
Minneapolis, MN
DESCRIPTION F E AT U R E S
Premier 6000AL Series regulators are high • Captured venting
pressure, hydraulic, piston sensed, pressure • Flow capacity (Cv): 0.06, 0.12, or 0.20
reducing regulators with a flow capacity (Cv) of • Piston sensed
0.06, 0.12, or 0.20, and control pressures up to • Compatible with electro-pneumatic controllers
10000 PSIG (689.5 bar). This regulator features • Machined bar stock body eliminates porosity
an air loader with a max inlet pressure of 100
PSIG / 6.89 bar (regulator 10000 PSIG (689.5 found in castings
bar) max inlet).
The 6000AL regulator’s captured venting allows
potentially hazardous media to be safely piped
away.
e Premier 6000AL Series pressure reducing regulator’s design is remarkably exible. D/C: 162211
Contact Premier Industries for a custom Premier 6000AL Series regulator to meet your exact needs.
Page 182
ors, valves, and Torc
hes
Min
AIR LOADED r e g u l at
USA
6000AL HIGH PRESSURE PREMIER INDUSTRIES
SERIES HYDRAULIC
Pressure Reducing Regulators neapolis M i n n e s o ta
S P E C I F I C AT I O N S PORTING
• MAXIMUM INLET PRESSURE: • INLET/OUTLET:
• REGULATOR: 10000 PSIG (689.5 bar) • 1/4”, 3/8”, 1/2” FNPT
• AIR ACTUATOR: 100 PSIG (6.89 bar) • 1/4”, 3/8”, 1/2” SAE J1926
• 1/4”, 3/8”, 1/2” SAE AS5202 (MS33649**)
• CONTROL PRESSURE RANGES: • 1/4”, 3/8”, 9/16” Medium Pressure
• 10-1500 PSIG (0.69 - 103.42 bar) • 1/4”, 3/8”, High Pressure
• 1/4”, 3/8”, 1/2” NPTF
Diameter: 1.000”
Area: 0.7854 in • AIR ACTUATOR: 1/4-18” NPTF
Ratio: / ** • VENT: 1/4” (inlet/outlet port type)
• 15-2500 PSIG (1.03 - 172.37 bar) OPTIONS
Diameter: 0.750” • Private Label
Area: 0.4418 in • Panel mounting bracket: (P/N: 30-10059)
Ratio: / ** • Surface mounting holes
• 50-6000 PSIG (3.45 - 413.69 bar) #10-32 UNF-3A X 3/4"
SHCS ASTM A574 12X
Diameter: 0.500”
Area: 0.1964 in 1/4 NPTF
Ratio: / ** PREMIER INDUSTRIES
100 PSIG MAX
• 100-10000 PSIG (6.89 - 689.5 bar)
PROUDLY
Diameter: 0.375”
Area: 0.1104 in MADE
IN
Ratio: / ** USA
** 4.0” diameter diaphragm
Diaphragm area: 12.5664 in
• FLOW (Cv): 0.06, 0.12, or 0.20
• AMBIENT OPERATING TEMPERATURES:
• -4°F/-20°C to 212°F/100°C (Viton®)*
• -15°F/-26°C to 212°F/100°C (BUNA-N)*
*lower temperature compounds available upon request
MATERIALS OF CONSTRUCTION Ø5.38
• BODY: 316 Stainless Steel A574
• HOUSING, AIR ACTUATOR : DUSTRI E S
XXXXX XX
• 6061-T6 Aluminum/clear anodized
• DIAPHRAGM, AIR ACTUATOR :
• Neoprene, nylon fabric-reinforced Ø2.120
5.13
• MAIN VALVE STEM: 17-4 Stainless Steel (hardened)
• MAIN VALVE SEAT:
• 17-4 Stainless Steel, hardened (standard) OUT
• Vespel® 1.19
3.77
• VENT VALVE SEAT: Vespel® .81
IN
• BACK-UP RINGS: PTFE & PCTFE IN
• ELASTOMER SEALS:
• BUNA-N ØA .59
• AFLAS® FLATS PORT TYPE ØA FLATS
NPT Ø2.48
• Viton® 1/4” J1926, M.P., H.P. Ø2.48 2.36
1/4” AS5202 Ø2.98 2.81
• EPDM OUT 1/4"EXT. 3/8” SAE, M.P., H.P. Ø2.98 2.81
VENT PORT 1/2” SAE 2.98
• Kalrez® (Contact factory for pricing) 9/16” M.P. Ø3.23 2.98
Ø3.23
• WETTED PARTS: OPTIONAL #10-32 UNF
• 316 Stainless Steel
SURFACE MOUNT HOLES
(pattern dependent on port con guration)
• 17-4 Stainless Steel 3/8” & larger ‘L’ porting con gurations
require a larger ØA
**SAE AS5202 supersedes MS33649 (Part number 30-10219 shown above) D/C: 182606
Viton® Vespel® and Kalrez® are registered trademarks of E.I.duPont de Nemours and Company
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd.
ors, valves, and Torc Page 183
hes
Min 6000AL
r e g u l at AIR LOADED SERIES
USA
PREMIER INDUSTRIES HIGH PRESSURE
HYDRAULIC
neapolis M i n n e s o ta Pressure Reducing Regulators
PART # -1 1 2 3 4 5 - 6 7 MODS
30-10219 --
1 OUTLET 3 PORTING 5 PORT TYPE MODIFICATIONS
PRESSURE CONFIG. IN/OUT/VENT (Optional)
3 10-1500 PSIG A G IN 1 NPT N NACE MR0175
(0.69-103.4 Bar) L* OUT compatible option
C
4 15-2500 PSIG G IN 2 SAE J1926
(1.0-172.4 Bar)
OUT SM Surface mount
G
6 50-6000 PSIG GG 3 SAE AS5202 (MS33649**)
(3.4-413.7 Bar) OUT IN
Vespel® main
100-10000 PSIG MEDIUM V valve seat
PRESSURE
7 (6.9-689.5 Bar) S OUT IN 4
(stainless steel only) *L porting con gurations with 3/8”
ports and larger require a larger
2 MAIN VALVE Cv body diameter 5 HIGH
PRESSURE
PORT SIZE
0 Cv 0.06 6 NPTF
1 Cv 0.12 4
2 Cv 0.20
67 O-RING
MATERIAL
4 1/4”
6 3/8” 00 BUNA-N
01 AFLAS®
Vent Valve Cv: 0.06 02 VITON®
8 1/2”**
9 9/16”** 05 EPDM
**1/2” ports not available 11 KALREZ®
in medium pressure
(Contact factory for pricing)
**9/16” ports only available
in medium pressure
Gauge ports: 1/4” FNPT
10000 PSIG MAX INLET: e end user is responsible to ensure adequate ttings are used to connect regulator to plumbing. D/C: 182606
**SAE AS5202 supersedes MS33649
Kalrez® Vespel® & Viton® are registered trademarks of E.I.duPont de Nemours and Company.
AFLAS® is a registered trademark of Asahi Glass Co., Ltd
Contact factory for material certi cations. Fees may apply.
ors, valves, and Torc Page 184
hes
Min 6000DL
r e g u l at DOME LOADED SERIES
USA HIGH PRESSURE
PREMIER INDUSTRIES HYDRAULIC
Pressure Reducing Regulators
neapolis M i n n e s o ta
PREMIER INDUSTRIES
1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020
MADE IN THE USA
Minneapolis, MN
DESCRIPTION F E AT U R E S
Premier 6000DL Series dome loaded, high pressure, • Captured venting
hydraulic, pressure reducing regulators: rugged, • Dome loaded for remote pressure control
compact regulators for remotely-controlled high • Compatible with electro-pneumatic controllers
pressure applications. These piston sensed units are • 17-4 & 316 stainless steel construction for strength
rated for inlet and outlet pressures up to 10000 PSIG
(689.5 bar) and Cv 0.06, 0.12, 0.20, or 0.30. and corrosion resistance
• 10000 PSIG (689.5 bar) max inlet
Premier 6000DL Series regulators are used to regulate • Cv 0.06, 0.12, 0.20, 0.30
a broad range of non-corrosive and corrosive media • Economical pricing
(based on materials of construction). Captured • Machined bar stock body, bonnet and
venting allows fluids/gases to be safely piped away.
piston reduce particle shedding and contamination
e Premier 6000DL Series pressure reducing regulator’s design is remarkably exible. D/C: 181107
Contact Premier Industries for a custom 6000DL Series regulator to meet your exact needs.
Page 185
ors, valves, and Torc
hes
Min
6000DL DOME LOADED r e g u l at
SERIES HIGH PRESSURE USA
HYDRAULIC PREMIER INDUSTRIES
Pressure Reducing Regulators
neapolis M i n n e s o ta
S P E C I F I C AT I O N S PANEL NUT STYLE
• MAX INLET PRESSURE: 10000 PSIG (689.5 bar) Ø2¼ -12 UN 2.500 HEX PANEL NUT 2X
• MAX CONTROL PRESSURE: 10000 PSIG (689.5 bar)
• MAX DOME LOAD: 10000 PSIG (689.5 bar) 2.03
• DOME TO SENSOR RATIO: 1:1 3.77
• FLOW (Cv): 0.06, 0.12, 0.20, 0.30
• VENT VALVE (Cv): 0.06
• OPERATING TEMPERATURE:
• -15°F/-26°C to 165°F/74°C (BUNA-N)
• -4°F/-20°C to 165°F/74°C (VITON®)
• -65°F/-54°C to 165°F/74°C (EPDM)
• 15°F/-9°C to 165°F/74°C (AFLAS®)
• -65°F/-54°C to 165°F/74°C (NITRILE)
MATERIALS OF CONSTRUCTION (Part number 30-10221PN shown above)
• BODY & BONNET : PANEL MOUNTING BRACKET STYLE
• 316 Stainless Steel,
1.563 DOME PORT
• WETTED PARTS, OTHER: HEX 1/4
• 316 Stainless Steel,
• 17-4 Stainless Steel Ø2.12
• MAIN VALVE SEAT: 316 Stainless Steel 1.19
• VENT VALVE SEAT: 316 Stainless Steel 3.77
• MAIN VALVE / VENT VALVE STEM: 17-4 Stainless Steel 4.60
• O-RING MATERIAL:
• BUNA-N
• AFLAS®
• Viton®
• EPDM
• Kalrez® (Contact factory for pricing)
• Nitrile, Lo-temp
• BACK-UP RINGS: PCTFE
PORTING PROUDLY
• INLET/ OUTLET PORTING OPTIONS:
MADE
• 1/4”, 3/8”, 1/2” FNPT
• 1/4”, 1/2”, 3/8”, SAE J1926 IN USA
• 1/4”, 1/2”, 3/8”, SAE AS5202*
• 1/4”, 3/8”, 9/16”, Medium pressure .59
• 1/4”, 3/8”, 9/16”, High pressure
(Part number 30-10221MB shown above)
• GAUGE PORTS:
PORT TYPE ØA FLATS
• 1/4” FNPT
NPT, NPTF Ø2.48
• DOME PORTS:
VENT PORT 2.360 1/4” J1926, M.P., H.P. Ø2.48 2.36
• 1/4” (match inlet/outlet/vent type) 1/4 MP & HP ONLY
1/4” AS5202 Ø2.98 2.81
• VENT PORTS: Ø2.480
3/8” SAE, M.P., H.P. Ø2.98 2.81
• 1/4” (match inlet/outlet/vent type)
1/2” SAE Ø3.23 2.98
OPTIONS
9/16” M.P. Ø3.23 2.98
• Gauges
• Private label
• Panel mounting bracket (P/N: 30-10059)
• Panel mounting nuts (P/N: 30-10189)
*SAE AS5202 supersedes MS33649 *Bodies w/ ‘L’ porting con gurations and 3/8”
Vespel® Kalrez® & Viton-A® are registered trademarks of E.I.duPont de Nemours and Company ports and larger require a larger ØA
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd.
D/C: 181107
ors, valves, and Torc DOME LOADED Page 186
hes
Min HIGH PRESSURE 6000DL
r e g u l at HYDRAULIC SERIES
USA Pressure Reducing Regulators
PREMIER INDUSTRIES
neapolis M i n n e s o ta
SERIES 1 2 -- 3 4 5 6 - 7 8 - MODS
30-10221 - --
1 2 MOUNTING STYLE PORTING PORT TYPE
MB Mounting bracket style body 4 CONFIG. 6 (IN/OUT
PN Panel nut style body
(1/4” FNPT) VENT/DOME)
3 MAIN VALVE SEATS & Cv
G 1 FNPT
A OUT 2 SAE J1926
IN 3 SAE AS5202*
4 Medium Pressure
G
5 High Pressure
L OUT 7 8 O-RINGS
IN
G
GG
C OUT IN
5 316 Stainless Steel S OUT IN
Cv 0.06
6 316 Stainless Steel 5 PORT
SIZE
Cv 0.12
316 Stainless Steel 4 1/4” 00 BUNA-N
Cv 0.20
7
6 3/8” 01 AFLAS®
8 316 Stainless Steel 8 1/2”* 02 VITON®
Cv 0.30
9 9/16** 05 EPDM
*1/2” not available in medium & high pressure 11 KALREZ®
**9/16” only available in medium & high pressure
(Contact factory for pricing)
12 NITRILE,
LO-TEMP
M O D I F I C AT I O N S
*SAE AS5202 supersedes MS33649 Blank None
10000 PSIG MAX INLET
D/C: 182409
e end user is responsible to ensure adequate ttings are used to connect regulator to plumbing.
Vespel® Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd
Contact factory for material certi cations. Fees may apply.
ors, valves, and Torc FLANGE MOUNTED Page 187
hes
Min HYDRAULIC 6000FL
r e g u l at SERIES
USA HIGH PRESSURE
PREMIER INDUSTRIES Pressure Reducing Regulators
neapolis M i n n e s o ta
PREMIER INDUSTRIES
1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020
MADE IN THE USA
Minneapolis, MN
DESCRIPTION F E AT U R E S
Premier 6000FL Series pressure reducing • Raised face, welded neck flange connections
regulators are flange mounted, high pressure, • 1” nominal pipe size
hydraulic, variable pressure & delivery regulators, • Captured venting standard
rated for inlet pressures up to 3000 psig (206.82 • Cv 0.06
bar) and Cv 0.06. Premier 6000FL Series • Max inlet: 3000 psig / 206.82 bar
regulators feature captured venting to safely pipe • ANSI B16.5 class 1500 forged flange
away potentially toxic or corrosive media. • Black anodized aluminum knob
Complete with ANSI B16.5 class 1500 forged • Machined bar stock body, bonnet and piston
flanges with a raised face and welded neck.
eliminates porosity found in castings
e Premier 6000FL Series pressure reducing regulator’s design is remarkably exible. D/C: 172003
Contact Premier Industries for a custom 6000FL Series regulator to meet your exact needs.
FLANGE MOUNTED Page 188
HYDRAULIC ors, valves, and Torc
hes
HIGH PRESSURE Min
Pressure Reducing Regulators r e g u l at
USA
6000FL PREMIER INDUSTRIES
SERIES
neapolis M i n n e s o ta
S P E C I F I C AT I O N S 6.95
8.63
• MAXIMUM INLET PRESSURE:
• 3000 PSIG (206.84 Bar) PROUDLY
• CONTROL PRESSURE RANGES: MADE
• 5-500 PSIG (0.35-34.5 Bar) IN
• 5-800 PSIG (0.35-55.2 Bar) USA
• 10-1500 PSIG (0.69-103.4 Bar)
• 15-2500 PSIG (1.0-172.4 Bar) .67
• FLOW CAPACITY Ø3.23 1/4 NPT
• MAIN VALVE Cv: 0.06 VENT PORT
• VENT VALVE Cv: 0.06
VENT
• OPERATING TEMPERATURE:**
• -15°F/-26°C to 165°F/74°C (BUNA-N) .810 MAX. IN
• -4°F/-20°C to 165°F/74°C (Viton®) 3000 PSIG
• -65°F/-54°C to 165°F/74°C (EPDM) OUT
• 0°F/-17°C to 165°F/74°C (KALREZ®)
• 15°F/-9°C to 165°F/74°C (ALFAS) NO. 1234
• -50°F/-45°C to 165°F/74°C (Nitrile, Low-temp)
• -61°F/-52°C to 165°F/74°C (Nitrile, Low-temp, butadiene) 2.13
MATERIALS OF CONSTRUCTION Ø4.00
Ø5.88
• BODY & BONNET OPTIONS: Ø.815
• 316 Stainless Steel
• 17-4 Stainless Steel Ø.990
4X
• VALVE SEAT: 17-4 Stainless Steel, hardened
• VENT VALVE SEAT: 316 Stainless Steel (Part Number: 30-10203FL)
• WETTED PARTS: 316 Stainless Steel and 17-4 Stainless Steel
• O-RING MATERIAL:
• Viton®
• Buna-N
• EPDM
• AFLAS
• Nitrile (Low-Temp)
• Kalrez® (Contact factory for pricing)
• Nitrile (Low-Temp) - Butadiene
• BACK-UP RINGS: PTFE
PORTING
• INLET PORT:
• ANSI B16.5 Class 1500 forged flange, 1” nomical pipe size,
welded neck and raised face
• OUTLET PORT:
• ANSI B16.5 Class 1500 forged flange, 1” nomical pipe size,
welded neck and raised face
• VENT PORT:
• 1/4" FNPT
OPTIONAL ITEMS
• Private label
**For extended temperature ranges please contact Premier Industries. Above temperature ranges will apply to the majority of media for which the material is D/C: 172405
recommended. Temperature ranges can vary with some media, ALWAYS TEST UNDER SERVICE CONDITIONS.
ors, valves, and Torc FLANGE MOUNTED Page 189
hes
Min HYDRAULIC 6000FL
r e g u l at SERIES
USA HIGH PRESSURE
PREMIER INDUSTRIES Pressure Reducing Regulators
neapolis M i n n e s o ta
PART # 1 2 - 3 4 5 6 7 - 8 9 - 10 11 12 13 14
30-10203 - --
1 2 MOUNTING STYLE 89 O-RING
MATERIALS
FL Flange mount 00 BUNA-N
style body
3 OUTLET 01 AFLAS®
PRESSURE
1 5-500 PSIG 02 VITON®
(0.34-34.5 Bar)
2 5-800 PSIG 05 EPDM
(0.34-55.2 Bar)
3 10-1500 PSIG 11 KALREZ®
(0.69-103.4 Bar)
(Contact factory for pricing)
4 15-2500 PSIG 12 NITRILE,
(1.0-172.4 Bar)
LO-TEMP
4 MAIN VALVE Cv 13 NITRILE,
LO-TEMP, BUTADIENE
0 Cv 0.06 10 11 ANSI FLANGE
CLASS
Vent Valve Cv: 0.06 15 ANSI class 1500
forged ange
5 PORTING FLANGE NECK
CONFIGURATION ST YLE
12 13
S OUT IN WN Welded neck
6 7 FLANGE FACE STYLE
14 NOMINAL
PIPE SIZE
RF Raised face
1 1” nominal pipe size
Contact factory for material certi cations. Fees may apply. D/C: 172405
ors, valves, and Torc Page 190
hes
Min 6016
r e g u l at H YDRAULIC SERIES
USA HIGH PRESSURE
PREMIER INDUSTRIES HIGH FLOW
Pressure Reducing Regulators
neapolis
M i n n e s o ta
PREMIER INDUSTRIES
1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020
MADE IN THE USA
Minneapolis, MN
DESCRIPTION F E AT U R E S
Premier 6016 Series regulators are hydraulic, high • Hydraulic
pressure, high flow, piston sensed, pressure • High flow capacity (Cv): 1.0
reducing regulators rated for inlet pressures up to • Captured venting (standard)
10000 psig / 689.5 bar (dependent upon • Piston sensed
con guration), and Cv 1.0. Captured venting • Optional gauge ports
allows potentially hazardous media to be safely • Machined bar stock body eliminates porosity
piped away.
found in castings
e Premier 6016 Series pressure reducing regulator’s design is remarkably exible. D/C: 180904
Contact Premier Industries for a custom 6016 Series regulator to meet your exact needs.
Page 191
ors, valves, and Torc
H I YDRAULIC hes
Min
6016 HIGH PRESSURE r e g u l at
SERIES HIGH FLOW USA
Pressure Reducing Regulators PREMIER INDUSTRIES
neapolis M i n n e s o ta
S P E C I F I C AT I O N S PANEL MOUNTING PANEL NUT STYLE
• MAXIMUM INLET PRESSURE: BRACKET STYLE (Ø2 /₃₂ PANEL HOLE)
• STAINLESS STEEL BODY: 10000 PSIG (689.5 bar) Ø2.68
Ø2.68
• CONTROL PRESSURE OPTIONS:
• 150 PSIG (0-10.3 bar)
• 300 PSIG (0-20.7 bar)
• 500 PSIG (0.3-34.5 bar)
• 1000 PSIG (0.3-68.9 bar),
• 1500 PSIG (0.7-103.4 bar)
• 2500 PSIG (1.0-172.4 bar)
• 4000 PSIG (1.7-275.8 bar) Ø2.12 2½” HEX Ø2¼-12 UN
• 6000 PSIG (3.4-413.7 bar) PANEL NUT 2X
• 10000 PSIG (6.9-689.5 bar) PROUDLY 7.30
• FLOW (Cv): 1.0
• VENT VALVE (Cv): 0.06 MADE
IN USA
• OPERATING TEMPERATURE:**
• -15°F/-26°C to 165°F/74°C (BUNA-N)
• -4°F/-20°C to 165°F/74°C (Viton®) 4.20
• -65°F/-54°C to 165°F/74°C (EPDM)
** Lower temperature compounds available 2.33
MATERIALS OF CONSTRUCTION 1.38 1.75 PROUDLY
MADE
IN USA
• BODY:
• 316 Stainless Steel
• MAIN VALVE STEM: 17-4 Stainless Steel (hardened) 1/4” VENT PORT
• MAIN VALVE SEAT: Vespel® (IN/OUT PORT TYPE)
• VENT VALVE SEAT: Vespel®
• BACK-UP RINGS: PTFE or PCTFE OUT .81
• O-RING MATERIAL OPTIONS:
• BUNA-N IN
• AFLAS®
• Viton®
• EPDM SAE FLATS
• Kalrez® (contact factory for pricing) ØA
• OTHER WETTED PARTS:
• 316 Stainless Steel, (Part number 30-10225 shown above)
• 17-4 Stainless Steel
PORTING BALL-BEARING TAMPER RESISTANT
HAND KNOB ACORN NUT
• INLET/OUTLET PORTING OPTIONS: (Optional) (Optional)
• 1/2”, 3/8” FNPT
• 1/2”, 3/8” SAE J1926
• 1/2”, 3/8” SAE AS5202 (MS33649**)
• VENT PORT:
• 1/4” (inlet/outlet port type)
• GAUGE PORTS:
• 1/4” FNPT
OPTIONS D/C: 182606
• Private Label
• Panel mounting bracket (P/N: 30-10059)
**SAE AS5202 supersedes MS33649
Viton®, Vespel® and Kalrez® are registered trademarks of E.I.duPont de Nemours & Company.
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd.
ors, valves, and Torc Page 192
hes
Min 6016
r e g u l at H YDRAULIC SERIES
USA
PREMIER INDUSTRIES HIGH PRESSURE
HIGH FLOW
neapolis M i n n e s o ta Pressure Reducing Regulators
PART NUMBER 1 2 -- 3 4 5 6 - 7 8 - MODS
30-10225 - --
1 2 MOUNTING STYLE 4 PORTING 7 8 O-RINGS
CONFIG.
MB Mounting bracket style body G
A 00 BUNA-N
Panel nut style body OUT IN
(Panel nuts included)
PN 01 AFLAS®
02 VITON®
G
3 OUTLET L IN
PRESSURE OUT
G
GG
C 150 PSIG (10.3 Bar) C IN 05 EPDM
OUT
0 300 PSIG (20.7 Bar) S OUT 11 KALREZ®
IN (contact factory for pricing)
1 500 PSIG (34.5 Bar) PORT SIZE M O D I F I C AT I O N S
(Inlet/outlet)
5
2 1000 PSIG (68.9 Bar)
6 3/8” Blank None
3 1500 PSIG (103.4 Bar) 8 1/2” ANT Acorn nut
BBL Ball-bearing loader
4 2500 PSIG (172.4 Bar) Gauge ports 1/4” FNPT
5 4000 PSIG (275.8 Bar) 6 PORT TYPE
(Inlet/outlet)
6 6000 PSIG (413.7 Bar) N FNPT
7 10000 PSIG (689.5 Bar) J SAE J1926
A SAE AS5202 (MS33649**)
**SAE AS5202 supersedes MS33649 D/C: 182606
10000 PSIG MAX INLET
e end user is responsible to ensure adequate ttings are used to connect regulator to plumbing.
Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company.
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd. Monel is a registered trademark of Specialty Metals Corporation.
Contact factory for material certi cations. Fees may apply.
ors, valves, and Torc HYDRAULIC Page 193
hes HIGH PRESSURE
Min LOW-TORQ UE HAND KNOB 6020
r e g u l at Pressure Reducing Regulators SERIES
USA
PREMIER INDUSTRIES
neapolis M i n n e s o ta
PREMIER INDUSTRIES
1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020
MADE IN THE USA
Minneapolis, MN
DESCRIPTION F E AT U R E S
The high pressure, hydraulic Premier 6020 Series • Low-torque hand knob
pressure reducing regulators are single stage, piston • Captured-venting
sensed, variable delivery, pressure reducing regulators, • Cv: 0.06, 0.12 or 0.2
designed for inlet and outlet pressures up to 10000 • Machined bar stock body, bonnet and
PSIG (689.5 Bar), and Cv 0.06, 0.12 or 0.2. This
regulator features an easily adjusted, ball bearing hand piston eliminates porosity found in castings
knob for smooth adjustments. • Economical pricing
Premier 6020 Series regulators are used to regulate a
broad range of non-corrosive and corrosive media
(based on materials of construction). Premier 6020
Series regulators can be supplied with a wide range of
inlet and outlet configurations.
e Premier 6020 Series pressure reducing regulator’s design is remarkably exible. D/C: 180506
Contact Premier Industries for a custom 6020 Series regulator to meet your exact needs.
Page 194
ors, valves, and Torc
hes
Min
6020 HYDRAULIC r e g u l at
SERIES HIGH PRESSURE USA
LOW-TORQ UE HAND KNOB PREMIER INDUSTRIES
Pressure Reducing Regulators
neapolis M i n n e s o ta
S P E C I F I C AT I O N S OPTIONS
• MAXIMUM INLET PRESSURE (SS) : 10000 PSIG (689.5 Bar) • Gauges
• MAXIMUM INLET PRESSURE (BRASS) : 6000 PSIG (413.7 Bar) • Captured venting
• CONTROL PRESSURE RANGES: • Private label
• Panel mounting bracket (P/N: 30-10059)
• 0-200 PSIG (0-13.8 Bar)
• 5-500 PSIG (0.35-34.5 Bar) Ø3.24
• 5-800 (0.35-55.2 Bar)
• 10-1500 PSIG (0.69-103.4 Bar) PREMIER INDUSTRIES Ø2.12 7.0
• 15-2500 PSIG (1.0-172.4 Bar) P/N 30-10218-XXXXX-XX
• 25-4000 PSIG (1.7-275.8 Bar) XX000 PSIG MAX INLET
• 50-6000 PSIG (3.4-413.7 Bar)
• 100-10000 PSIG (6.9-689.5 Bar) XX00 PSIG OUT
• FLOW (Cv): 0.06, 0.12, or 0.2
• OPERATING TEMPERATURES: PROUDLY
• BUNA-N: -15°F / -26°C* to 165°F / 74°C
• Viton®: -4°F / -20°C* to 165°F / 74°C MADE
• EPDM: -65°F / -54°C to 165°F / 74°C
IN USA
* lower temperature compounds are available
1.19
MATERIALS OF CONSTRUCTION
.59
• BODY : 1/4” FNPT GAUGE PORTS
• 316 Stainless Steel (OPTIONAL)
• SAE 360 Brass
1/4” VENT PORT
• BONNET: IN
• 17-4 Stainless Steel
• SAE 360 Brass FLATS
• OTHER WETTED PARTS: 316 Stainless Steel
• O-RING MATERIAL OPTIONS:
• Viton®
• Buna-N
• EPDM
• Kalrez® (contact factory for pricing)
• AFLAS®
• Nitrile, lo-temp
• BACK-UP RINGS: PTFE, and PCTFE
• MAIN VALVE: 316 Stainless Steel & 17-4 Stainless Steel
• MAIN VALVE SEAT: 316 Stainless Steel
PORTING ØA
• INLET PORTING OPTIONS: OUT
• 1/4”, 3/8”, 1/2” FNPT (Part Number: 30-10218C )
• 1/4”, 3/8”, 1/2” SAE J1926
• 1/4”, 3/8”, 1/2” SAE AS5202 (MS33649**) PORT TYPE ØA FLATS
• 1/4”, 3/8”, 9/16” Medium Pressure NPT, NPTF Ø2.48
• OUTLET PORTING OPTIONS: 1/4” M.P. Ø2.48 2.36
• 1/4”, 3/8”, 1/2” FNPT 1/4” & 3/8” SAE Ø2.98 2.81
• 1/4”, 3/8”, 1/2” SAE J1926 3/8” M.P. Ø2.98 2.81
• 1/4”, 3/8”, 1/2” SAE AS5202 (MS33649**) 1/2” SAE 2.98
• 1/4”, 3/8”, 9/16” Medium Pressure 9/16” M.P. Ø3.23 2.98
Ø3.23
** SAE AS5202 supersedes MS33649 D/C: 182606
Vespel® Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company
A as® is a registered trademark of the Asahi Glass Co., Ltd.
ors, valves, and Torc Page 195
hes HYDRAULIC
Min HIGH PRESSURE 6020
r e g u l at LOW-TORQ UE HAND KNOB SERIES
USA Pressure Reducing Regulators
PREMIER INDUSTRIES
neapolis M i n n e s o ta
SERIES - 1 2 3 4 5 - 6 7 8 - MODS
30-10218C - --
1 BODY/BONNET MATERIALS 3 FLOW 6 7 O-RINGS
(MAX. INLET PRESSURE) (Cv)
1 SAE 360 Brass Body & Bonnet 0 Cv 0.06 00 BUNA-N
(6000 PSIG / 413.7 Bar) 1 Cv 0.12 01 AFLAS
2 316SS Body, 17-4SS Bonnet
(10000 PSIG / 689.5 Bar)
OUTLET 2 Cv 0.2 02 VITON®
PRESSURE
2
0-200 PSIG 4 PORT SIZE 05 EPDM
(0-13.8 Bar)
0 Gauge ports 1/4” FNPT
4 1/4” 11 KALREZ®
(contact factory for pricing)
5-500 PSIG
1 (0.34-34.5 Bar) 6 3/8” NITRILE,
8 1/2”* LO-TEMP
12
2 5-800 PSIG PORT
(0.34-55.2 Bar) CONFIGURATION
8
3 10-1500 PSIG 9 9/16”** G
(0.69-103.4 Bar)
*1/2” not available in medium pressure A OUT
15-2500 PSIG **9/16” only available in medium pressure. IN
(1.0-172.4 Bar)
4 GG
C OUT IN
5 25-4000 PSIG 5 PORT TYPE G
(1.7-275.8 Bar)
L OUT
6 50-6000 PSIG 1 FNPT IN
(3.4-413.7 Bar) 2 SAE J1926 G
3 SAE AS5202 (MS33649**)
4 Medium Pressure S OUT IN
7 100-10000 PSIG
(6.9-689.5 Bar)
(stainless steel only)
M O D I F I C AT I O N S
**SAE AS5202 supersedes MS33649
10000 PSIG MAX INLET Blank none
e end user is responsible to ensure adequate ttings are used to connect regulator to plumbing. SM surface mount*
Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company P TU port type uniform
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd.
Contact factory for material certi cations. Fees may apply. *Surface mount: pattern dependent on
port type, size, and con guration
D/C: 182707
ors, valves, and Torc HIGH PRESSURE Page 196
hes
Min HYDRAULIC 6023
r e g u l at 15000 PSIG SERIES
USA Pressure Reducing Regulators
PREMIER INDUSTRIES
neapolis M i n n e s o ta
PREMIER INDUSTRIES
1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020
MADE IN THE USA
Minneapolis, MN
DESCRIPTION F E AT U R E S
The high pressure, hydraulic Premier 3023 Series • Captured venting
pressure reducing regulators are single stage, piston • 15000 PSIG (1034.21 bar) MAX
sensed, variable delivery, pressure reducing regulators, • Cv 0.06 or 0.12
designed for inlet and outlet pressures up to 15000 • Optional ball-bearing loader
PSIG (1034.21 bar) and Cv 0.06 or 0.12. • Optional tamper resistant acorn nut
• Optional threaded panel mounting nut or
Premier 3023 Series regulators are used to regulate a
broad range of non-corrosive and corrosive media panel mounting bracket style body
(based on materials of construction). The regulator’s • Economical pricing
captured venting allows fluids/gases to be safely piped • Machined bar stock body, bonnet and
away. Premier 3023 Series regulators can be supplied
with a wide range of inlet and outlet configurations. piston eliminates porosity found in castings
e Premier 6023 Series pressure reducing regulator’s design is remarkably exible. D/C: 181804
Contact Premier Industries for a custom 6023 Series regulator to meet your exact needs.
HIGH PRESSURE Page 197
HYDRAULIC ors, valves, and Torc
15000 PSIG hes
Pressure Reducing Regulators Min
6023 r e g u l at
SERIES USA
PREMIER INDUSTRIES
neapolis M i n n e s o ta
S P E C I F I C AT I O N S PANEL NUT PANEL MOUNTING
• MAX INLET PRESSURE (SS): 15000 PSIG (1034.21 bar) STYLE BRACKET STYLE
• CONTROL PRESSURE RANGES: Ø2.68
• 5-500 PSIG (0.34 - 34.47 bar),
• 5-1000 PSIG (0.34 - 68.95 bar),
• 10-1500 PSIG (0.69 - 103.42 bar),
• 15-2500 PSIG (1.03 - 172.37 bar),
• 25-4000 PSIG (1.72 - 275.79 bar),
• 50-6000 PSIG (3.45 - 413.69 bar),
• 100-10000 PSIG (6.89 - 689.48 bar), Ø2¼ -12 UN 2.500 HEX
PANEL NUT 2X
• 300-15000 PSIG (20.68 - 1034.21 bar) Ø2.12
USE PANEL
• FLOW (Cv): 0.06 or 0.12 CUT-OUT: Ø 2 /
• OPERATING TEMPERATURE:
• -15°F/-26°C to 165°F/74°C (BUNA-N) .59
1.19
• -4°F/-20°C to 165°F/74°C (VITON®) 3.77
6.9
• -65°F/-54°C to 165°F/74°C (EPDM)
• 15°F/-9°C to 165°F/74°C (AFLAS®) 2.03
3.77
• -65°F/-54°C to 165°F/74°C (NITRILE)
MATERIALS OF CONSTRUCTION 15000 PSIG
MAX IN
• BODY : 316 Stainless Steel, 15000 PSIG
• BONNET: 17-4 Stainless Steel MAX IN
• WETTED PARTS, OTHER:
PORT TYPE ØA FLATS ØA FLATS
• 316 Stainless Steel, NPT Ø2.48 1/4” VENT
• 17-4 Stainless Steel 1/4” OTHER Ø2.48 2.36 PORT
• BACK-UP RINGS: PTFE, PCTFE 2.81
• MAIN VALVE SEAT: 3/8” M.P. Ø2.98 2.98
• 17-4 Stainless Steel 3/8” H.P 2.98
• Vespel® 9/16” M.P. Ø3.23
• MAIN/VENT VALVE STEM: Ø3.23
• 17-4 Stainless Steel
• VENT VALVE SEAT: 3/8” and larger ‘L’ and ‘E’ porting
• Vespel® con gurations require a larger ØA
• 316 Stainless Steel
(Part number 30-10213 shown above)
PORTING
TAMPER RESISTANT
ACORN NUT (optional)
• INLET/OUTLET/
• 1/4” FNPT (standard), medium pressure, high pressure
• 3/8” FNPT, medium pressure, high pressure
• 9/16” medium pressure
• VENT PORTING:
• 1/4” FNPT (standard) PANEL MOUNTING BALL BEARING
• 1/4” Medium pressure BRACKET (optional) LOADER (optional)
• 1/4” High pressure 1/4-20 UNC-2B Ø3.24
• GAUGE PORTS: 1/4” FNPT 2X
OPTIONS (Ø3.5)
• Gauges (Ø2.120)
• Private label (Ø2.80)
• Panel mounting bracket (P/N: 30-10059)
• Panel mounting nuts with threaded body
Vespel® & Viton® are registered trademarks of E.I.duPont de Nemours and Company D/C : 181804
AFLAS® is a registered trademark of Asahi Glass Co., Ltd
ors, valves, and Torc HIGH PRESSURE Page 198
hes
Min HYDRAULIC 6023
r e g u l at 15000 PSIG SERIES
USA Pressure Reducing Regulators
PREMIER INDUSTRIES
neapolis M i n n e s o ta
PART # 1 2 - 3 4 5 6 - 7 8 9 - MODS
30-10213 - --
1 2 MOUNTING STYLE 4 PORTING 7 8 O-RINGS
CONFIG.
MB Mounting bracket A G 00 BUNA-N
style body L* OUT
C IN
PN Panel nut style body G IN 01 AFLAS®
02 VITON®
OUT
G
3 OUTLET G G 05 EPDM
PRESSURE OUT IN
1 5-500 PSIG S OUT 11 KALREZ®
(0.34-34.5 Bar)
IN (Contact factory for pricinmg)
2 5-1000 PSIG E* G 12 NITRILE,
(0.34-68.95 Bar) OUT
LO-TEMP
OUT
IN Cv MAIN VALVE
3 10-1500 PSIG *L and E porting con gurations w/ 3/8” ports 9 (VALVE SEAT
(0.69-103.4 Bar) and larger require a larger body diameter
MATERIAL)
4 15-2500 PSIG PORT SIZE 0 Cv 0.06
(1.0-172.4 Bar) ( Vespel®)
5
5 25-4000 PSIG 4 1/4” 1 Cv 0.12
(1.7-275.8 Bar) ( Vespel®)
6 50-6000 PSIG 6 3/8” Cv 0.06
(3.4-413.7 Bar)
5 (17-4 Stainless Steel)
7 100-10000 PSIG 9 9/16” (only available 6 Cv 0.12
(6.9-689.5 Bar) in medium pressure) (17-4 Stainless Steel)
8 300-15000 PSIG 6 PORT TYPE MODIFICATIONS
(20.68-1,034.21 Bar) IN/OUT/VENT (Optional)
1 FNPT Blank None
4 MEDIUM BBL Ball-bearing loader
PRESSURE
5 HIGH ANT Acorn nut
PRESSURE
Gauge ports: 1/4” NPT
15000 PSIG MAX INLET: e end user is responsible to ensure adequate ttings are used to connect regulator to plumbing. D/C: 181804
Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company. AFLAS® is a registered trademark of Asahi Glass Co., Ltd
Contact factory for material certi cations. Fees may apply.
ors, valves, and Torc Page 199
hes HIGH PRESSURE, 15000 PSIG
Min HYDRAULIC 6023AL
r e g u l at AIR LOADED SERIES
USA Pressure Reducing Regulators
PREMIER INDUSTRIES
neapolis M i n n e s o ta
PREMIER INDUSTRIES
1590 99th Ln NE,
Minneapolis, MN 55449
763-786-4020
MADE IN THE USA
Minneapolis, MN
DESCRIPTION F E AT U R E S
The high pressure, hydraulic, air loaded, Premier • Compatible with electro-pneumatic controllers
6023AL Series pressure reducing regulators are single • 15000 PSIG (1034.21 bar) MAX
stage, piston sensed, pressure reducing regulators, • Captured venting
designed for inlet and outlet pressures up to 15000 • Cv 0.06 or 0.12
PSIG (1034.21 bar) and Cv 0.06 or 0.12. • Numerous optional features
• Economical pricing
Premier 6023AL Series Regulators are designed for • Machined bar stock body, bonnet and
compatibility with electropneumatic controllers,
enabling piloted pressure control from an inert gas at piston eliminates porosity found in castings
low pressures (100 psig / 6.89 bar max air load).
Premier 6023AL Series regulators are used to regulate
a broad range of non-corrosive and corrosive media
(based on materials of construction). Captured
venting is standard.
e Premier 6023AL Series pressure reducing regulator’s design is remarkably exible. D/C: 170507
Contact Premier Industries for a custom 6023AL Series regulator to meet your exact needs.
HIGH PRESSURE, 15000 PSIG Page 200
HYDRAULIC
AIR LOADED ors, valves, and Torc
Pressure Reducing Regulators hes
Min
r e g u l at
USA
6023AL PREMIER INDUSTRIES
SERIES
neapolis M i n n e s o ta
S P E C I F I C AT I O N S PORTING
• MAX INLET PRESSURE: • INLET/OUTLET PORTING OPTIONS:
• REGULATOR: 15000 PSIG / 1034.21 bar (stainless steel)
• AIR ACTUATOR: 100 PSIG (6.89 bar) • 1/4”, 3/8” FNPT (standard)
• 1/4”, 3/8”, 9/16” Medium Pressure
• CONTROL PRESSURE RANGES: • 1/4”, 3/8” High Pressure
• 10-1500 PSIG (0.69 - 103.42 bar) • VENT PORT: 1/4” inlet/outlet port type
Diameter: 1.000” • LOAD PORT: 1/4” NPTF
Area: 0.7854 in
Ratio: / ** OPTIONS
• 15-2500 PSIG (1.03 - 172.37 bar)
Diameter: 0.750” • Gauges
Area: 0.4418 in • Private label
Ratio: / ** • Panel mounting bracket: P/N: 30-10059
• 50-6000 PSIG (3.45 - 413.69 bar)
Diameter: 0.500” PREMIER INDUSTRIES
Area: 0.1964 in 100 PSIG MAX
Ratio: / **
• 100-10000 PSIG (6.89 - 689.5 bar) PROUDLY
Diameter: 0.375”
Area: 0.1104 in MADE
Ratio: / ** IN
• 300-15000 PSIG (20.68 - 1034.21 bar) USA
Diameter: 0.312” 1/4 NPTF
Area: 0.0765 in
Ratio: / ** Ø5.38
** 4.0” diameter diaphragm Ø2.120
Diaphragm area: 12.5664 in
LABEL DUSTRI E S 5.13
• FLOW (Cv): 0.06 or 0.12 XXXXX XX
• OPERATING TEMPERATURE: 3.77
Ø2.48
• -15°F/-26°C to 212°F/100°C (BUNA-N) IN FNPT OUT
• -4°F/-20°C to 212°F/100°C (VITON®) ONLY
• -65°F/-54°C to 212°F/100°C (EPDM) 1.19
• 15°F/-9°C to 212°F/100°C (AFLAS)
.59
MATERIALS OF CONSTRUCTION
1/4" EXT.IN
• BODY: VENT PORTOUT
• 316 Stainless Steel .81
• HOUSING, AIR ACTUATOR: 2.36
• 6061-T6 Aluminum, Clear Anodized 1/4” M.P.
• DIAPHRAGM, AIR ACTUATOR: ONLY
• Neoprene, nylon reinforced
(Part number: 30-10229 shown above)
• WETTED PARTS, OTHER:
• 316 Stainless Steel, D/C: 172604
• 17-4 Stainless Steel
• BACK-UP RINGS: PTFE, PCTFE
• MAIN VALVE SEAT/VENT VALVE SEAT OPTIONS:
• 17-4 Stainless Steel, hardened (standard)
• Vespel®
• MAIN/VENT VALVE STEM:
• 17-4 Stainless Steel, hardened
Vespel® Kalrez® & Viton® are registered trademarks of E.I.duPont de Nemours and Company
AFLAS® is a registered trademark of the Asahi Glass Co., Ltd
The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
Premier_Industries_Product_Catalog
Discover the best professional documents and content resources in AnyFlip Document Base.
Search