ADEX

ADEX VALVE

MULTIPIN CONNECTOR TYPE/MCS, MCX Date of issue ..

MANIFOLD Your company name
Person in charge

SPECIFICATIONS Specification No.
Order No.

(Duplicate this page and fill in this form.) Quantity Set (s) Date of delivery

Type of manifold (Note) * : Made to order

Write a mark of circle in□ at the head of the type of manifold to be used and fill in this form.

PR type MC A P Polarity
P : NPN type
M : * PNP type

Special specifications Size of ports 2 and 4 Connector specification
S : Standard
X : Common external pilot Mountable solenoid 05 12 DL : D sub-connector
01 ○ ML : Flat cable connector
Number of stations Valve series
2 2 station A05 Series 02 ○ (Note) C4 and C6 of A05 series can be applied
A12 Series to MCX alone.
C4 * * CZ : For use with tubes of different diameter
C6 * * When using G, NPT, NPTF threads,
consult KURODA Pneumatics Ltd.
… C8 *
…
C10
12 12 station
CZ *

Type of mountable solenoid valve Wiring (Note) * : Made to order

Fill in blanks for type of solenoid valve.

NPN type

P : With indicator light and surge suppressor

S : Without indicator light and surge suppressor

AP M : With indicator light and surge suppressor

J : Without indicator light and surge suppressor

Solenoid valve series Function Voltage
1 : DC24V
A05 Series Special specifications
A12 Series
No mark : Standard (Note) X is used only when solenoid

X : External pilot valve is mounted on manifold

for common external pilot.

Number of stations

Specify the type and arrangement of solenoid valve to be mounted by a mark of circle. Number of stations

Standard manifold is so designed that all ports open.

When plugging a port, specify the intended place to be plugged by writing×" " in the

column of port specification.

When using tubes of different diameter on the same manifold, specify the required

size by writing a symbol C4, C6, C8 or C10 in the column of port specification.

Number of stations for manifold 1 2 3 4 5 6 7 8 9 10 11 12 Quantity

Single solenoid S25

Mounted Double solenoid D25
solenoid Closed center D35
valve Exhaust center E35

Pressure center O35

Blank plate

Port specification Port 2
Port 4

For factory use For sales department use

Control No. Approved by : Checked by : Received by: Manufacture No. Approved by : Person in charge

101 Parker Hannifin Corporation
Pneumatic Division

ADEX VALVE

MULTIPIN CONNECTOR TYPE/MCU Date of issue ..

MANIFOLD Your company name Set(s) Date of delivery
SPECIFICATIONS Person in charge
Specification No. (Note) * : Made to order
(Duplicate this page and fill in this form). Order No.
Quantity

Type of manifold
□Write a mark of circle in at the head of the type of manifold to be used and fill in this form.

PR type MCU A F

Polarity

Number of stations Mountable solenoid Size of ports 2 and 4 P : NPN type
2 2 station Value series 05 12
A05 Series M : * PNP type
12 12 station A12 Series
… M5 ○
…

01 ○ Connector specification
DL : D sub-connector
02 * ML : Flat cable connector
*
C4 * (Note) When using G, NPT, NPTF
C6 * threads, consult KURODA Pneumatics Ltd.
C8

C10

Type of mountable solenoid valve (Note) * : Made to order

Fill in blanks for type of solenoid valve.

AR Wiring

Solenoid valve series Function Voltage NPN type
1 : DC24V P : With indicator light and surge suppressor
A05 Series S : Without indicator light and surge suppressor
A12 Series
*PNP type (Only GF type)

M : With indicator light and surge suppressor
J : Without indicator light and surge suppressor

Number of stations

Specify the type and arrangement of solenoid valve to be mounted by a mark of circle. Number of stations

Standard manifold is so designed that all ports open.

When plugging a port, specify the intended place to be plugged by writing"×" in the

column of port specification.

Number of stations for manifold 1 2 3 4 5 6 7 8 9 10 11 12 Quantity

Single solenoid S25

Mounted Double solenoid D25
solenoid Closed center D35
valve Exhaust center E35

Pressure center O35

Blank plate

Port specification Port 2
Port 4

For factory use For sales department use

Control No. Approved by : Checked by : Received by: Manufacture No. Approved by : Person in charge

102 Parker Hannifin Corporation
Pneumatic Division

ADEX VALVE

INDIVIDUAL WIRING TYPE/MFS Date of issue ..
Set (s) Date of delivery
MANIFOLD Your company name
SPECIFICATIONS Person in charge
Specification No.
(Duplicate this page and fill in this form.) Order No.
Quantity
Type of manifold
M3
Fill in blanks for type of manifold.

MFS A00S

Mountable solenoid Value series Size of port 2
A00S Series M3 M3

Number of stations
2 2 station

20 20 station
…
…

Type of mountable solenoid valve (Note) * : Made to order

Fill in blanks for type of solenoid valve. Connector

A00S No mark : Without connector
E : With connector

Function Voltage Wiring
1 : DC24V
Flow P : With indicator light and surge suppressor
No mark : Standard type S : Without indicator light and surge suppressor
Q : With indicator light and surge suppressor
J : Large flow type B : Without indicator light and surge suppressor
(Note) J is DC only. (Note) S & B :In case of AC, without indicator light

with surge suppressor

Number of stations

Specify the type and arrangement of solenoid valve to be mounted by a mark of circle.
However, A00SO23(J ) cannot be mounted on the same manifold together with Number of stations →
A00SC23 (J).
Standard manifold is so designed that all ports open.
When plugging a port, specify the intended place to be plugged by writing"×" in the
column of port specification.

Number of stations for manifold 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Quantity
O23
Mounted Normal open C23
solenoid Normal closed
valve

Blank plate

Port specification Port 2

For factory use For sales department use

Control No. Approved by : Checked by : Received by: Manufacture No. Approved by : Person in charge

103 Parker Hannifin Corporation
Pneumatic Division

ADEX VALVE

104 Parker Hannifin Corporation
Pneumatic Division

ADEX VALVE

Offer of Sale

The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized
distributors, are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. This
offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and Conditions. Buyer’s order for any such item, when
communicated to Parker Hannifin Corporation, its subsidiaries or an authorized distributor (“Seller”) verbally or in writing, shall constitute acceptance
of this offer.

1.Terms and Conditions of Sale: All descriptions, quotations, proposals, offers, 8.Buyer’s Property: Any designs, tools, patterns, materials, drawings, confidential
acknowledgments, acceptances and sales of Seller’s products are subject to and information or equipment furnished by Buyer, or any other items which become
shall be governed exclusively by the terms and conditions stated herein. Buyer’s Buyer’s property, may be considered obsolete and may be destroyed by Seller
acceptance of any offer to sell is limited to these terms and conditions. Any terms after two (2) consecutive years have elapsed without Buyer placing an order
or conditions in addition to, or inconsistent with those stated herein, proposed by for the items which are manufactured using such property. Seller shall not
Buyer in any acceptance of an offer by Seller, are hereby objected to. No such be responsible for any loss or damage to such property while it is in Seller’s
additional, different or inconsistent terms and conditions shall become part of the possession or control.
contract between Buyer and Seller unless expressly accepted in writing by Seller.
Seller’s acceptance of any offer to purchase by Buyer is expressly conditional upon 9. Taxes: Unless otherwise indicated on the face hereof, all prices and charges
Buyer’s assent to all the terms and conditions stated herein, including any terms are exclusive of excise, sales, use, property, occupational or like taxes which
in addition to, or inconsistent with those contained in Buyer’s offer. Acceptance may be imposed by any taxing authority upon the manufacture, sale or delivery
of Seller’s products shall in all events constitute such assent. of the items sold hereunder. If any such taxes must be paid by Seller or if Seller
is liable for the collection of such tax, the amount thereof shall be in addition to
2. Payment: Payment shall be made by Buyer net 30 days from the date of the amounts for the items sold. Buyer agrees to pay all such taxes or to reimburse
delivery of the items purchased hereunder. Amounts not timely paid shall bear Seller therefore upon receipt of its invoice. If Buyer claims exemption from any
interest at the maximum rate permitted by law for each month or portion thereof sales, use or other tax imposed by any taxing authority, Buyer shall save Seller
that the Buyer is late in making payment. Any claims by Buyer for omissions or harmless from and against any such tax, together with any interest or penalties
shortages in a shipment shall be waived unless Seller receives notice thereof thereon which may be assessed if the items are held to be taxable.
within 30 days after Buyer’s receipt of the shipment.
10. Indemnity For Infringement of Intellectual Property Rights: Seller shall
3. Delivery: Unless otherwise provided on the face hereof, delivery shall be made have no liability for infringement of any patents, trademarks, copyrights, trade
F.O.B. Seller’s plant. Regardless of the method of delivery, however, risk of loss dress, trade secrets or similar rights except as provided in this Part 10. Seller
shall pass to Buyer upon Seller’s delivery to a carrier. Any delivery dates shown will defend and indemnify Buyer against allegations of infringement of U.S.
are approximate only and Seller shall have no liability for any delays in delivery. patents, U.S. trademarks, copyrights, trade dress and trade secrets (hereinafter
“Intellectual Property Rights”). Seller will defend at its expense and will pay the
4. Warranty: Seller warrants that the items sold hereunder shall be free from cost of any settlement or damages awarded in an action brought against Buyer
defects in material or workmanship for a period of 18 months from date of shipment based on an allegation that an item sold pursuant to this contract infringes the
from Parker Hannifin Corporation. THIS WARRANTY COMPRISES THE SOLE Intellectual Property Rights of a third party. Seller’s obligation to defend and
AND ENTIRE WARRANTY PERTAINING TO ITEMS PROVIDED HEREUNDER. indemnify Buyer is contingent on Buyer notifying Seller within ten (10) days after
SELLER MAKES NO OTHER WARRANTY, GUARANTEE, OR REPRESENTATION Buyer becomes aware of such allegations of infringement, and Seller having sole
OF ANY KINDWHATSOEVER.ALL OTHERWARRANTIES, INCLUDING BUT NOT control over the defense of any allegations or actions including all negotiations
LIMITED TO, MERCHANTABILITY AND FITNESS FOR PURPOSE, WHETHER for settlement or compromise. If an item sold hereunder is subject to a claim
EXPRESS, IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE, that it infringes the Intellectual Property Rights of a third party, Seller may, at
OR COURSE OF DEALING ARE HEREBY DISCLAIMED. its sole expense and option, procure for Buyer the right to continue using said
item, replace or modify said item so as to make it noninfringing, or offer to accept
NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRANTIES return of said item and return the purchase price less a reasonable allowance
WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY OR PARTIALLY, for depreciation. Notwithstanding the foregoing, Seller shall have no liability for
TO BUYER’S DESIGN OR SPECIFICATIONS. claims of infringement based on information provided by Buyer, or directed to
items delivered hereunder for which the designs are specified in whole or part
5. Limitation of Remedy: SELLER’S LIABILITY ARISING FROM OR IN ANY by Buyer, or infringements resulting from the modification, combination or use
WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACT SHALL BE in a system of any item sold hereunder. The foregoing provisions of this Part 10
LIMITED EXCLUSIVELYTO REPAIR OR REPLACEMENT OFTHE ITEMS SOLD shall constitute Seller’s sole and exclusive liability and Buyer’s sole and exclusive
OR REFUND OFTHE PURCHASE PRICE PAID BY BUYER, AT SELLER’S SOLE remedy for infringement of Intellectual Property Rights.
OPTION. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND OR NATURE If a claim is based on information provided by Buyer or if the design for an item
WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS ARISING delivered hereunder is specified in whole or in part by Buyer, Buyer shall defend
FROM OR IN ANY WAY CONNECTED WITH THIS AGREEMENT OR ITEMS and indemnify Seller for all costs, expenses or judgements resulting from any
SOLD HEREUNDER, WHETHER ALLEGED TO ARISE FROM BREACH OF claim that such item infringes any patent, trademark, copyright, trade dress, trade
CONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT, INCLUDING secret or any similar right.
WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO WARN OR STRICT
LIABILITY. 11. Force Majeure: Seller does not assume the risk of and shall not be liable for
delay or failure to perform any of Seller’s obligations by reason of circumstances
6. Changes, Reschedules and Cancellations: Buyer may request to modify the beyond the reasonable control of Seller (hereinafter “Events of Force Majeure”).
designs or specifications for the items sold hereunder as well as the quantities and Events of Force Majeure shall include without limitation, accidents, acts of God,
delivery dates thereof, or may request to cancel all or part of this order, however, strikes or labor disputes, acts, laws, rules or regulations of any government or
no such requested modification or cancellation shall become part of the contract government agency, fires, floods, delays or failures in delivery of carriers or
between Buyer and Seller unless accepted by Seller in a written amendment to suppliers, shortages of materials and any other cause beyond Seller’s control.
this Agreement. Acceptance of any such requested modification or cancellation
shall be at Seller’s discretion, and shall be upon such terms and conditions as 12. Entire Agreement/Governing Law: The terms and conditions set forth
Seller may require. herein, together with any amendments, modifications and any different terms
or conditions expressly accepted by Seller in writing, shall constitute the entire
7. Special Tooling: A tooling charge may be imposed for any special tooling, Agreement concerning the items sold, and there are no oral or other representations
including without limitations, dies, fixtures, molds and patterns, acquired to or agreements which pertain thereto. This Agreement shall be governed in all
manufacture items sold pursuant to this contract. Such special tooling shall be respects by the law of the State of Ohio. No actions arising out of sale of the
and remain Seller’s property notwithstanding payment of any charges by Buyer. items sold hereunder or this Agreement may be brought by either party more
In no event will Buyer acquire any interest in apparatus belonging to Seller which than two (2) years after the cause of action accrues.
is utilized in the manufacture of the items sold hereunder, even if such apparatus
has been specially converted or adapted for such manufacture and notwithstanding
any charges paid by Buyer. Unless otherwise agreed, Seller shall have the right
to alter, discard or otherwise dispose of any special tooling or other property in
its sole discretion at any time.

105 Parker Hannifin Corporation
Pneumatic Division

Parker Worldwide

AE – UAE, Dubai FR – France, Contamine s/Arve RO – Romania, Bucharest
Tel: +971 4 8127100 Tel: +33 (0)4 50 25 80 25 Tel: +40 21 252 1382
[email protected] [email protected] [email protected]

AR – Argentina, Buenos Aires GR – Greece, Athens RU – Russia, Moscow
Tel: +54 3327 44 4129 Tel: +30 210 933 6450 Tel: +7 495 645-2156
[email protected] [email protected]
AT – Austria, Wiener Neustadt
Tel: +43 (0)2622 23501-0 HK – Hong Kong SE – Sweden, Spånga
[email protected] Tel: +852 2428 8008 Tel: +46 (0)8 59 79 50 00
[email protected]
AT – Eastern Europe, HU – Hungary, Budapest
Wiener Neustadt Tel: +36 1 220 4155 SG – Singapore
Tel: +43 (0)2622 23501 900 [email protected] Tel: +65 6887 6300
[email protected]
IE – Ireland, Dublin SK – Slovakia, Banská Bystrica
AU – Australia, Castle Hill Tel: +353 (0)1 466 6370 Tel: +421 484 162 252
Tel: +61 (0)2-9634 7777 [email protected] [email protected]

AZ – Azerbaijan, Baku IN – India, Mumbai SL – Slovenia, Novo Mesto
Tel: +994 50 2233 458 Tel: +91 22 6513 7081-85 Tel: +386 7 337 6650
[email protected] [email protected]
IT – Italy, Corsico (MI)
BE/LU – Belgium, Nivelles Tel: +39 02 45 19 21 TH – Thailand, Bangkok
Tel: +32 (0)67 280 900 [email protected] Tel: +662 717 8140
[email protected]
JP – Japan, Tokyo TR – Turkey, Istanbul
BR – Brazil, Cachoeirinha RS Tel: +(81) 3 6408 3901 Tel: +90 216 4997081
Tel: +55 51 3470 9144 [email protected]
KR – South Korea, Seoul
BY – Belarus, Minsk Tel: +82 2 559 0400 TW – Taiwan, Taipei
Tel: +375 17 209 9399 Tel: +886 2 2298 8987
[email protected] KZ – Kazakhstan, Almaty
Tel: +7 7272 505 800 UA – Ukraine, Kiev
CA – Canada, Milton, Ontario [email protected] Tel +380 44 494 2731
Tel: +1 905 693 3000 [email protected]
LV – Latvia, Riga
CH – Switzerland, Etoy Tel: +371 6 745 2601 UK – United Kingdom,
Tel: +41 (0) 21 821 02 30 [email protected] Warwick
[email protected] Tel: +44 (0)1926 317 878
MX – Mexico, Apodaca [email protected]
CL – Chile, Santiago Tel: +52 81 8156 6000
Tel: +56 2 623 1216 US – USA, Cleveland
MY – Malaysia, Shah Alam Tel: +1 216 896 3000
CN – China, Shanghai Tel: +60 3 7849 0800
Tel: +86 21 2899 5000 VE – Venezuela, Caracas
NL – The Netherlands, Tel: +58 212 238 5422
CZ – Czech Republic, Klecany Oldenzaal
Tel: +420 284 083 111 Tel: +31 (0)541 585 000 ZA – South Africa,
[email protected] [email protected] Kempton Park
Tel: +27 (0)11 961 0700
DE – Germany, Kaarst NO – Norway, Ski [email protected]
Tel: +49 (0)2131 4016 0 Tel: +47 64 91 10 00
[email protected] [email protected] European Product Information Centre
Free phone: 00 800 27 27 5374
DK – Denmark, Ballerup NZ – New Zealand, Mt Wellington (from AT, BE, CH, CZ, DE, DK, EE, ES, FI,
Tel: +45 43 56 04 00 Tel: +64 9 574 1744 FR, IE, IL, IS, IT, LU, MT, NL, NO, PL, PT, RU,
[email protected] SE, UK, ZA)
PL – Poland, Warsaw
ES – Spain, Madrid Tel: +48 (0)22 573 24 00 Catalogue No. KPL 0909E-a
Tel: +34 902 330 001 [email protected]
[email protected]
PT – Portugal, Leca da Palmeira
FI – Finland, Vantaa Tel: +351 22 999 7360
Tel: +358 (0)20 753 2500 [email protected]

© 2010 Parker Hannifin Corporation. All rights reserved.

Your local authorized Parker distributor