Fluid Fitting 2018_extended

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

BSPP FEMALE STUD COUPLING

316 STAINLESS STEEL

Note: The BSPP Female threads ‘A’ will screw onto BSPP Male with either Captive or Dowty
type seal. The Metric threads ‘B’ are DIN Light (L) or DIN Heavy (S) and come complete with
Tube Nut and Cutting Ring.

Part No. Thread A Thread B Tube OD
(BSPPF) (Metric L) (mm)
S-GAV6LR
S-GAV8LR 1/8” M12x1.5 6
S-GAV10LR 1/4” M14x1.5 8
S-GAV12LR 1/4” M16x1.5 10
S-GAV15LR 3/8” M18x1.5 12
S-GAV18LR 1/2” M22x1.5 15
S-GAV22LR 1/2” M26x1.5 18
S-GAV28LR 3/4” M30x2.0 22
S-GAV35LR 1” M36x2.0 28
S-GAV42LR 1.1/4” M45x2.0 35
1.1/2” M52x2.0 42

Part No. Thread A Thread B Tube OD
(BSPPF) (Metric S) (mm)
S-GAV6SR
S-GAV8SR 1/4” M14x1.5 6
S-GAV10SR 1/4” M16x1.5 8
S-GAV12SR 3/8” M18x1.5 10
S-GAV14SR 3/8” M20x1.5 12
S-GAV16SR 1/2” M22x1.5 14
S-GAV20SR 1/2” M24x1.5 16
S-GAV25SR 3/4” M30x2.0 20
S-GAV30SR 1” M36x2.0 25
S-GAV38SR 1.1/4” M42x2.0 30
1.1/2” M52x2.0 38

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N9

PAGE C9 N11
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

UN‘O’ RING MALE STUD COUPLING

316 STAINLESS STEEL

Note: The Metric threads ‘B’ are DIN Light (L) or DIN Heavy (S) and come complete with Tube
Nut and Cutting Ring.

Part No. Thread A Thread B Tube OD
(UN‘O’) (Metric L) (mm)
S-GEV6L7/16UN
S-GEV8L7/16UN 7/16” M12x1.5 6
S-GEV10L1/2UN 7/16” M14x1.5 8
S-GEV10L9/16UN 1/2” M16x1.5 10
S-GEV12L9/16UN 9/16” M16x1.5 10
S-GEV12L3/4UN 9/16” M18x1.5 12
S-GEV12L7/8UN 3/4” M18x1.5 12
S-GEV15L3/4UN 7/8” M18x1.5 12
S-GEV15L7/8UN 3/4” M22x1.5 15
S-GEV22L1.1/16UN 7/8” M22x1.5 15
1.1/16” M30x2.0 22

Part No. Thread A Thread B Tube OD
(UN‘O’) (Metric S) (mm)
S-GEV12S3/4UN
S-GEV16S7/8UN 3/4” M20x1.5 12
S-GEV20S1.1/16UN 7/8” M24x1.5 16
S-GEV25S1.1/16UN 1.1/16” M30x2.0 20
1.1/16” M36x2.0 25

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N10

PAGE C10 N12
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

NPT MALE STUD COUPLING

316 STAINLESS STEEL

Note: The Metric threads ‘B’ are DIN Light (L) or DIN Heavy (S) and come complete with Tube
Nut and Cutting Ring.

Part No. Thread A Thread B Tube OD
(NPT) (Metric L) (mm)
S-GEV6L1/8NPT
S-GEV6L1/4NPT 1/8” M12x1.5 6
S-GEV8L1/4NPT 1/4” M12x1.5 6
S-GEV10L1/4NPT 1/4” M14x1.5 8
S-GEV10L3/8NPT 1/4” M16x1.5 10
S-GEV12L1/4NPT 3/8” M16x1.5 10
S-GEV12L3/8NPT 1/4” M18x1.5 12
S-GEV12L1/2NPT 3/8” M18x1.5 12
S-GEV15L1/2NPT 1/2” M18x1.5 12
S-GEV18L1/2NPT 1/2” M22x1.5 15
S-GEV22L3/4NPT 1/2” M26x1.5 18
S-GEV28L1NPT 3/4” M30x2.0 22
S-GEV35L1.1/4NPT 1” M36x2.0 28
S-GEV42L1.1/2NPT 1.1/4” M45x2.0 35
1.1/2” M52x2.0 42
Part No.
Thread A Thread B Tube OD
S-GEV6S1/4NPT (NPT) (Metric S) (mm)
S-GEV8S1/4NPT
S-GEV10S1/4NPT 1/4” M14x1.5 6
S-GEV10S3/8NPT 1/4” M16x1.5 8
S-GEV12S1/4NPT 1/4” M18x1.5 10
S-GEV12S3/8NPT 3/8” M18x1.5 10
S-GEV12S1/2NPT 1/4” M20x1.5 12
S-GEV14S1/2NPT 3/8” M20x1.5 12
S-GEV16S1/2NPT 1/2” M20x1.5 12
S-GEV16S3/4NPT 1/2” M22x1.5 14
S-GEV20S3/4NPT 1/2” M24x1.5 16
S-GEV25S1NPT 3/4” M24x1.5 16
S-GEV30S1.1/4NPT 3/4” M30x2.0 20
S-GEV38S1.1/2NPT 1” M36x2.0 25
1.1/4” M42x2.0 30
1.1/2” M52x2.0 38

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N11

PAGE C11 N13
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

NPT MALE STUD ELBOW

316 STAINLESS STEEL

Note: The Metric threads ‘B’ are DIN Light (L) or DIN Heavy (S) and come complete with
Tube Nut and Cutting Ring.

Part No. Thread A Thread B Tube OD
(NPT) (Metric L) (mm)
S-WEV6L1/8NPT
S-WEV6L1/4NPT 1/8 M12x1.5 6
S-WEV8L1/8NPT 1/4” M12x1.5 6
S-WEV8L1/4NPT 1/8” M14x1.5 8
S-WEV10L1/4NPT 1/4” M14x1.5 8
S-WEV10L3/8NPT 1/4” M16x1.5 10
S-WEV12L1/4NPT 3/8” M16x1.5 10
S-WEV12L3/8NPT 1/4” M18x1.5 12
S-WEV12L1/2NPT 3/8” M18x1.5 12
S-WEV15L1/2NPT 1/2” M18x1.5 12
S-WEV18L1/2NPT 1/2” M22x1.5 15
S-WEV22L3/4NPT 1/2” M26x1.5 18
S-WEV28L1NPT 3/4” M30x2.0 22
S-WEV35L1.1/4NPT 1” M36x2.0 28
S-WEV42L1.1/2NPT 1.1/4” M45x2.0 35
1.1/2” M52x2.0 42

Part No. Thread A Thread B Tube OD
(NPT) (Metric S) (mm)
S-WEV6S1/4NPT
S-WEV8S1/4NPT 1/4” M14x1.5 6
S-WEV10S3/8NPT 1/4” M16x1.5 8
S-WEV12S3/8NPT 3/8” M18x1.5 10
S-WEV12S1/2NPT 3/8” M20x1.5 12
S-WEV14S1/2NPT 1/2” M20x1.5 12
S-WEV16S1/2NPT 1/2” M22x1.5 14
S-WEV20S3/4NPT 1/2” M24x1.5 16
S-WEV25S1NPT 3/4” M30x2.0 20
S-WEV30S1.1/4NPT 1” M36x2.0 25
S-WEV38S1.1/2NPT 1.1/4” M42x2.0 30
1.1/2” M52x2.0 38

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N12

PAGE C12 N14
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

BSPT MALE STUD ELBOW

LIGHT LIGHT (LL) & LIGHT (L) SERIES - 316 STAINLESS STEEL

Note: The BSPT threads ‘A’ are designed to be screwed into a BSPT Female port block only.
The Metric threads ‘B’ are DIN Light Light (LL) or DIN Light (L) and come complete with Tube
Nut and Cutting Ring.

Part No. Thread A Thread B Tube OD
(BSPT) (Metric LL) (mm)
S-WEV4LLRK
S-WEV6LLRK 1/8” M08x1.0 4
S-WEV8LLRK 1/8” M10x1.0 6
1/8” M12x1.0 8
Part No.
Thread A Thread B Tube OD
S-WEV6LRK (BSPT) (Metric L) (mm)
S-WEV6LR1/4K
S-WEV8LRK 1/8” M12x1.5 6
S-WEV10LRK 1/4” M12x1.5 6
S-WEV10LR3/8K 1/4” M14x1.5 8
S-WEV10LR1/2K 1/4” M16x1.5 10
S-WEV12LR1/4K 3/8” M16x1.5 10
S-WEV12LRK 1/2” M16x1.5 10
S-WEV12LR1/2K 1/4” M18x1.5 12
S-WEV15LR3/8K 3/8” M18x1.5 12
S-WEV15LRK 1/2” M18x1.5 12
S-WEV18LRK 3/8” M22x1.5 15
S-WEV22LRK 1/2” M22x1.5 15
S-WEV28LRK 1/2” M26x1.5 18
3/4” M30x2.0 22
1” M36x2.0 28

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N13

PAGE C13 N15
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

BSPT MALE STUD ELBOW

HEAVY (S) SERIES - 316 STAINLESS STEEL

Note: The BSPT threads ‘A’ are designed to be screwed into a BSPT Female port block only.
The Metric threads ‘B’ are DIN Heavy (S) and come complete with Tube Nut and Cutting
Ring.

Part No. Thread A Thread B (S) Tube OD (mm)
S-WEV6SRK 1/4” M14x1.5 6
S-WEV8SRK 1/4” M16x1.5 8
S-WEV10SRK 3/8” M18x1.5 10
S-WEV12SRK 3/8” M20x1.5 12
S-WEV12SR1/2K 1/2” M20x1.5 12
S-WEV14SRK 1/2” M22x1.5 14
S-WEV16SRK 1/2” M24x1.5 16
S-WEV20SRK 3/4” M30x2.0 20
S-WEV25SRK 1” M36x2.0 25

BSPP (Adjustable) MALE STUD ELBOW

316 STAINLESS STEEL

Part No. Thread A Thread B (L) Tube OD (mm)
S-WEV6LR-AE 1/8” M12x1.5 6
S-WEV8LR-AE 1/4” M14x1.5 8
S-WEV10LR-AE 1/4” M16x1.5 10
S-WEV12LR-AE 3/8” M18x1.5 12
S-WEV15LR-AE 1/2” M22x1.5 15
S-WEV18LR-AE 1/2” M26x1.5 18
S-WEV22LR-AE 3/4” M30x2.0 22
S-WEV28LR-AE 1” M36x2.0 28
S-WEV35LR-AE 1.1/4” M45x2.0 35
S-WEV42LR-AE 1.1/2” M52x2.0 42

Part No. Thread A Thread B (S) Tube OD (mm)
S-WEV6SR-AE 1/4” M14x1.5 6
S-WEV8SR-AE 1/4” M16x1.5 8
S-WEV10SR-AE 3/8” M18x1.5 10
S-WEV12SR-AE 3/8” M20x1.5 12
S-WEV14SR-AE 1/2” M22x1.5 14
S-WEV16SR-AE 1/2” M24x1.5 16
S-WEV20SR-AE 3/4” M30x2.0 20
S-WEV25SR-AE 1” M36x2.0 25
S-WEV30SR-AE 1.1/4” M42x2.0 30
S-WEV38SR-AE 1.1/2” M52x2.0 38

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N14

PAGE C14 N16
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

METRIC TUBE STRAIGHT COUPLING

316 STAINLESS STEEL

Note: The Metric threads are DIN Light Light (LL) or DIN Light (L) or DIN Heavy (S) and come
complete with Tube Nut and Cutting Ring.

Part No. Threads A, B Tube OD
(Metric LL) (mm)
S-GV4LL
S-GV6LL M08x1.0 4
S-GV8LL M10x1.0 6
M12x1.0 8
Part No.
Threads A, B Tube OD
S-GV6L (Metric L) (mm)
S-GV8L
S-GV10L M12x1.5 6
S-GV12L M14x1.5 8
S-GV15L M16x1.5 10
S-GV18L M18x1.5 12
S-GV22L M22x1.5 15
S-GV28L M26x1.5 18
S-GV35L M30x2.0 22
S-GV42L M36x2.0 28
M45x2.0 35
Part No. M52x2.0 42

S-GV6S Threads A, B Tube OD
S-GV8S (Metric S) (mm)
S-GV10S
S-GV12S M14x1.5 6
S-GV14S M16x1.5 8
S-GV16S M18x1.5 10
S-GV20S M20x1.5 12
S-GV25S M22x1.5 14
S-GV30S M24x1.5 16
S-GV38S M30x2.0 20
M36x2.0 25
M42x2.0 30
M52x2.0 38

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N15

PAGE C15 N17
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

METRIC TUBE REDUCING COUPLING

316 STAINLESS STEEL

Note: The Metric threads are DIN Light (L) or DIN Heavy (S) and come complete with Tube
Nut and Cutting Ring.

Part No. Thread A Threads B Tube OD Tube OD
(Metric L) (Metric L) A (mm) B (mm)
S-GV8/6L
S-GV10/6L M14x1.5 M12x1.5 8 6
S-GV10/8L M16x1.5 M12x1.5 10 6
S-GV12/8L M16x1.5 M14x1.5 10 8
S-GV12/10L M18x1.5 M14x1.5 12 8
S-GV15/10L M18x1.5 M16x1.5 12 10
S-GV15/12L M22x1.5 M16x1.5 15 10
S-GV18/12L M22x1.5 M18x1.5 15 12
S-GV18/15L M26x1.5 M18x1.5 18 12
S-GV22/15L M26x1.5 M22x1.5 18 15
S-GV22/18L M30x2.0 M22x1.5 22 15
S-GV28/22L M30x2.0 M26x1.5 22 18
S-GV35/28L M36x2.0 M30x20. 28 22
S-GV42/35L M45x2.0 M36x2.0 35 28
M52x2.0 M45x2.0 42 35

Part No. Thread A Threads B Tube OD Tube OD
(Metric S) (Metric S) A (mm) B (mm)
S-GV8/6S
S-GV10/6S M16x1.5 M14x1.5 8 6
S-GV10/8S M18x1.5 M14x1.5 10 6
S-GV12/10S M18x1.5 M16x1.5 10 8
S-GV14/12S M20x1.5 M18x1.5 12 10
S-GV16/14S M22x1.5 M20x1.5 14 12
S-GV20/16S M24x1.5 M22x1.5 16 14
S-GV25/20S M30x2.0 M24x1.5 20 16
S-GV30/25S M36x2.0 M30x2.0 25 20
S-GV38/30S M42x2.0 M36x2.0 30 25
M52x2.0 M42x2.0 38 30

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N16

PAGE C16 N18
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

METRIC TUBE 90° ELBOW

316 STAINLESS STEEL

Note: The Metric threads are DIN Light Light (LL) or DIN Light (L) or DIN Heavy (S) and come
complete with Tube Nut and Cutting Ring.

Part No. Thread A, B Tube OD
(Metric LL) (mm)
S-WV4LL
S-WV6LL M08x1.0 4
S-WV8LL M10x1.0 6
M12x1.0 8

Part No. Threads A, B Tube OD
(Metric L) (mm)
S-WV6L
S-WV8L M12x1.5 6
S-WV10L M14x1.5 8
S-WV12L M16x1.5 10
S-WV15L M18x1.5 12
S-WV18L M22x1.5 15
S-WV22L M26x1.5 18
S-WV28L M30x2.0 22
S-WV35L M36x2.0 28
S-WV42L M45x2.0 35
M52x2.0 42

Part No. Threads A, B Tube OD
(Metric S) (mm)
S-WV6S
S-WV8S M14x1.5 6
S-WV10S M16x1.5 8
S-WV12S M18x1.5 10
S-WV14S M20x1.5 12
S-WV16S M22x1.5 14
S-WV20S M24x1.5 16
S-WV25S M30x2.0 20
S-WV30S M36x2.0 25
S-WV38S M42x2.0 30
M52x2.0 38

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N17

PAGE C17 N19
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

METRIC TUBE TEE

316 STAINLESS STEEL

Note: The Metric threads are DIN Light Light (LL) or DIN Light (L) or DIN Heavy (S) and come
complete with Tube Nut and Cutting Ring.

Part No. Threads A, B, C Tube OD
(Metric LL) (mm)
S-TV4LL
S-TV6LL M08x1.0 4
S-TV8LL M10x1.0 6
M12x1.0 8

Part No. Threads A, B, C Tube OD
(Metric L) (mm)
S-TV6L
S-TV8L M12x1.5 6
S-TV10L M14x1.5 8
S-TV12L M16x1.5 10
S-TV15L M18x1.5 12
S-TV18L M22x1.5 15
S-TV22L M26x1.5 18
S-TV28L M30x2.0 22
S-TV35L M36x2.0 28
S-TV42L M45x2.0 35
M52x2.0 42

Part No. Threads A, B, C Tube OD
(Metric S) (mm)
S-TV6S
S-TV8S M14x1.5 6
S-TV10S M16x1.5 8
S-TV12S M18x1.5 10
S-TV14S M20x1.5 12
S-TV16S M22x1.5 14
S-TV20S M24x1.5 16
S-TV25S M30x2.0 20
S-TV30S M36x2.0 25
S-TV38S M42x2.0 30
M52x2.0 38

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N18

PAGE C18 N20
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

METRIC TUBE BULKHEAD

316 STAINLESS STEEL

Note: The Metric threads are DIN Light (L) or DIN Heavy (S) and come complete with Tube
Nut and Cutting Ring.

Part No. Threads A, B Tube OD
(Metric L) (mm)
S-GSV6L
S-GSV8L M12x1.5 6
S-GSV10L M14x1.5 8
S-GSV12L M16x1.5 10
S-GSV15L M18x1.5 12
S-GSV18L M22x1.5 15
S-GSV22L M26x1.5 18
S-GSV28L M30x2.0 22
S-GSV35L M36x2.0 28
S-GSV42L M45x2.0 35
M52x2.0 42

Part No. Threads A, B Tube OD
(Metric S) (mm)
S-GSV6S
S-GSV8S M14x1.5 6
S-GSV10S M16x1.5 8
S-GSV12S M18x1.5 10
S-GSV14S M20x1.5 12
S-GSV16S M22x1.5 14
S-GSV20S M24x1.5 16
S-GSV25S M30x2.0 20
S-GSV30S M36x2.0 25
S-GSV38S M42x2.0 30
M52x2.0 38

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N19

PAGE C19 N21
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

METRIC TUBE 90° BULKHEAD

316 STAINLESS STEEL

Note: The Metric threads are DIN Light (L) or DIN Heavy (S) and come complete with Tube
Nut and Cutting Ring.

Part No. Threads A, B Tube OD
(Metric L) (mm)
S-WSV6L
S-WSV8L M12x1.5 6
S-WSV10L M14x1.5 8
S-WSV12L M16x1.5 10
S-WSV15L M18x1.5 12
S-WSV18L M22x1.5 15
S-WSV22L M26x1.5 18
S-WSV28L M30x2.0 22
S-WSV35L M36x2.0 28
S-WSV42L M45x2.0 35
M52x2.0 42

Part No. Threads A, B Tube OD
(Metric S) (mm)
S-WSV6S
S-WSV8S M14x1.5 6
S-WSV10S M16x1.5 8
S-WSV12S M18x1.5 10
S-WSV14S M20x1.5 12
S-WSV16S M22x1.5 14
S-WSV20S M24x1.5 16
S-WSV25S M30x2.0 20
S-WSV30S M36x2.0 25
S-WSV38S M42x2.0 30
M52x2.0 38

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N20

PAGE C20 N22
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

METRIC TUBE CROSS

316 STAINLESS STEEL

Note: The Metric threads are DIN Light (L) or DIN Heavy (S) and come complete with Tube
Nut and Cutting Ring.

Part No. Threads A, B, C, D Tube OD
(Metric L) (mm)
S-KV6L
S-KV8L M12x1.5 6
S-KV10L M14x1.5 8
S-KV12L M16x1.5 10
S-KV15L M18x1.5 12
S-KV18L M22x1.5 15
S-KV22L M26x1.5 18
S-KV28L M30x2.0 22
S-KV35L M36x2.0 28
S-KV42L M45x2.0 35
M52x2.0 42

Part No. Threads A, B, C, D Tube OD
(Metric S) (mm)
S-KV6S
S-KV8S M14x1.5 6
S-KV10S M16x1.5 8
S-KV12S M18x1.5 10
S-KV14S M20x1.5 12
S-KV16S M22x1.5 14
S-KV20S M24x1.5 16
S-KV25S M30x2.0 20
S-KV30S M36x2.0 25
S-KV38S M42x2.0 30
M52x2.0 38

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N21

PAGE C21 N23
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

METRIC TUBE NON RETURN VALVE

316 STAINLESS STEEL

Note: The Metric threads are DIN Light (L) or DIN Heavy (S) and come complete with Tube
Nut and Cutting Ring.

Part No. Threads A, B Tube OD
(Metric L) (mm)
S-RV6L
S-RV8L M12x1.5 6
S-RV10L M14x1.5 8
S-RV12L M16x1.5 10
S-RV15L M18x1.5 12
S-RV18L M22x1.5 15
S-RV22L M26x1.5 18
S-RV28L M30x2.0 22
S-RV35L M36x2.0 28
S-RV42L M45x2.0 35
M52x2.0 42

Part No. Threads A, B Tube OD
(Metric S) (mm)
S-RV6S
S-RV8S M14x1.5 6
S-RV10S M16x1.5 8
S-RV12S M18x1.5 10
S-RV14S M20x1.5 12
S-RV16S M22x1.5 14
S-RV20S M24x1.5 16
S-RV25S M30x2.0 20
S-RV30S M36x2.0 25
S-RV38S M42x2.0 30
M52x2.0 38

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N22

PAGE C22 N24
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

METRIC TUBE X METRIC FEMALE SWIVEL 90° ELBOW

316 STAINLESS STEEL

Note: Threads ‘A’ are Metric DIN Light (L) or DIN Heavy (S) and come complete with Tube
Nut and Cutting Ring. Threads ‘B’ are Metric DIN Light (L) Female Swivel or DIN Heavy (S)
Female Swivel and will screw onto the equivalent Metric Male thread.

Part No. Thread A Thread B Tube OD
(Metric L) (Metric L FS) (mm)
S-EWV6L-SV
S-EWV8L-SV M12x1.5 M12x1.5 6
S-EWV10L-SV M14x1.5 M14x1.5 8
S-EWV12L-SV M16x1.5 M16x1.5 10
S-EWV15L-SV M18x1.5 M18x1.5 12
S-EWV18L-SV M22x1.5 M22x1.5 15
S-EWV22L-SV M26x1.5 M26x1.5 18
S-EWV28L-SV M30x2.0 M30x2.0 22
S-EWV35L-SV M36x2.0 M36x2.0 28
S-EWV42L-SV M45x2.0 M45x2.0 35
M52x2.0 M52x2.0 42

Part No. Thread A Thread B Tube OD
(Metric S) (Metric S FS) (mm)
S-EWV6S-SV
S-EWV8S-SV M14x1.5 M14x1.5 6
S-EWV10S-SV M16x1.5 M16x1.5 8
S-EWV12S-SV M18x1.5 M18x1.5 10
S-EWV14S-SV M20x1.5 M20x1.5 12
S-EWV16S-SV M22x1.5 M22x1.5 14
S-EWV20S-SV M24x1.5 M24x1.5 16
S-EWV25S-SV M30x2.0 M30x2.0 20
S-EWV30S-SV M36x2.0 M36x2.0 25
S-EWV38S-SV M42x2.0 M42x2.0 30
M52x2.0 M52x2.0 38

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N23

PAGE C23 N25
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

METRIC TUBE X METRIC FEMALE SWIVEL BRANCH TEE

316 STAINLESS STEEL

Note: Threads ‘A’ & ‘B’ are Metric DIN Light (L) or DIN Heavy (S) and come complete with Tube
Nut and Cutting Ring. Threads ‘C’ are Metric DIN Light (L) Female Swivel or DIN Heavy (S)
Female Swivel and will screw onto the equivalent Metric Male thread.

Part No. Threads A, B Thread C Tube OD
(Metric L) (Metric L FS) (mm)
S-ETV6L-SV
S-ETV8L-SV M12x1.5 M12x1.5 6
S-ETV10L-SV M14x1.5 M14x1.5 8
S-ETV12L-SV M16x1.5 M16x1.5 10
S-ETV15L-SV M18x1.5 M18x1.5 12
S-ETV18L-SV M22x1.5 M22x1.5 15
S-ETV22L-SV M26x1.5 M26x1.5 18
S-ETV28L-SV M30x2.0 M30x2.0 22
S-ETV35L-SV M36x2.0 M36x2.0 28
S-ETV42L-SV M45x2.0 M45x2.0 35
M52x2.0 M52x2.0 42

Part No. Threads A, B Thread C Tube OD
(Metric S) (Metric S FS) (mm)
S-ETV6S-SV
S-ETV8S-SV M14x1.5 M14x1.5 6
S-ETV10S-SV M16x1.5 M16x1.5 8
S-ETV12S-SV M18x1.5 M18x1.5 10
S-ETV14S-SV M20x1.5 M20x1.5 12
S-ETV16S-SV M22x1.5 M22x1.5 14
S-ETV20S-SV M24x1.5 M24x1.5 16
S-ETV25S-SV M30x2.0 M30x2.0 20
S-ETV30S-SV M36x2.0 M36x2.0 25
S-ETV38S-SV M42x2.0 M42x2.0 30
M52x2.0 M52x2.0 38

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N24

PAGE C24 N26
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

METRIC TUBE X METRIC FEMALE SWIVEL RUN TEE

316 STAINLESS STEEL

Note: Threads ‘A’ & ‘C’ are Metric DIN Light (L) or DIN Heavy (S) and come complete with Tube
Nut and Cutting Ring. Threads ‘B’ are Metric DIN Light (L) Female Swivel or DIN Heavy (S)
Female Swivel and will screw onto the equivalent Metric Male thread.

Part No. Threads A, C Thread B Tube OD
(Metric L) (Metric L FS) (mm)
S-ELV6L-SV
S-ELV8L-SV M12x1.5 M12x1.5 6
S-ELV10L-SV M14x1.5 M14x1.5 8
S-ELV12L-SV M16x1.5 M16x1.5 10
S-ELV15L-SV M18x1.5 M18x1.5 12
S-ELV18L-SV M22x1.5 M22x1.5 15
S-ELV22L-SV M26x1.5 M26x1.5 18
S-ELV28L-SV M30x2.0 M30x2.0 22
S-ELV35L-SV M36x2.0 M36x2.0 28
S-ELV42L-SV M45x2.0 M45x2.0 35
M52x2.0 M52x2.0 42

Part No. Threads A, C Thread B Tube OD
(Metric S) (Metric S FS) (mm)
S-ELV6S-SV
S-ELV8S-SV M14x1.5 M14x1.5 6
S-ELV10S-SV M16x1.5 M16x1.5 8
S-ELV12S-SV M18x1.5 M18x1.5 10
S-ELV14S-SV M20x1.5 M20x1.5 12
S-ELV16S-SV M22x1.5 M22x1.5 14
S-ELV20S-SV M24x1.5 M24x1.5 16
S-ELV25S-SV M30x2.0 M30x2.0 20
S-ELV30S-SV M36x2.0 M36x2.0 25
S-ELV38S-SV M42x2.0 M42x2.0 30
M52x2.0 M52x2.0 38

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N25

PAGE C25 N27
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

BSPP MALE X METRIC FEMALE SWIVEL

316 STAINLESS STEEL

Note: The BSPP thread has a captive seal and is designed to be screwed into a BSPP Female
port block only. The Metric threads are DIN Light (L) Female Swivel or DIN Heavy (S) Female
Swivel and will screw onto the equivalent Metric Male thread.

Part No. Thread A Thread B Tube OD
(BSPP) (Metric L FS) (mm)

S-EGES6LR-WD-SV 1/8” M12x1.5 6
S-EGES8LR-WD-SV 1/4” M14x1.5 8
S-EGES10LR-WD-SV 1/4” M16x1.5 10
S-EGES12LR-WD-SV 3/8” M18x1.5 12
S-EGES15LR-WD-SV 1/2” M22x1.5 15
S-EGES18LR-WD-SV 1/2” M26x1.5 18
S-EGES22LR-WD-SV 3/4” M30x2.0 22
S-EGES28LR-WD-SV 1” M36x2.0 28
S-EGES35LR-WD-SV 1.1/4” M45x2.0 35
S-EGES42LR-WD-SV 1.1/2” M52x2.0 42

Part No. Thread A Thread B Tube OD
(BSPP) (Metric S FS) (mm)

S-EGES6SR-WD-SV 1/4” M14x1.5 6
S-EGES8SR-WD-SV 1/4” M16x1.5 8
S-EGES10SR-WD-SV 3/8” M18x1.5 10
S-EGES12SR-WD-SV 3/8” M20x1.5 12
S-EGES14SR-WD-SV 1/2” M22x1.5 14
S-EGES16SR-WD-SV 1/2” M24x1.5 16
S-EGES20SR-WD-SV 3/4” M30x2.0 20
S-EGES25SR-WD-SV 1” M36x2.0 25
S-EGES30SR-WD-SV 1.1/4” M42x2.0 30
S-EGES38SR-WD-SV 1.1/2” M52x2.0 38

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N26

PAGE C26 N28
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

METRIC MALE X METRIC FEMALE SWIVEL

316 STAINLESS STEEL

Note: The Metric threads ‘A’ have a captive seal and are designed to be screwed in to a Metric
Female port block only. The Metric threads ‘B’ are DIN Light (L) Female Swivel or DIN Heavy
(S) Female Swivel and will screw onto the equivalent Metric Male thread.

Part No. Thread A Thread B Tube OD
(MetricPORT) (Metric L FS) (mm)

S-EGES6LM-WD-SV M10x1.0 M12x1.5 6
S-EGES8LM-WD-SV M12x1.5 M14x1.5 8
S-EGES10LM-WD-SV M14x1.5 M16x1.5 10
S-EGES12LM-WD-SV M16x1.5 M18x1.5 12
S-EGES15LM-WD-SV M18x1.5 M22x1.5 15
S-EGES18LM-WD-SV M22x1.5 M26x1.5 18
S-EGES22LM-WD-SV M26x1.5 M30x2.0 22
S-EGES28LM-WD-SV M33x2.0 M36x2.0 28
S-EGES35LM-WD-SV M42x2.0 M45x2.0 35
S-EGES42LM-WD-SV M48x2.0 M52x2.0 42

Part No. Thread A Thread B Tube OD
(MetricPORT) (Metric S FS) (mm)

S-EGES6SM-WD-SV M12x1.5 M14x1.5 6
S-EGES8SM-WD-SV M14x1.5 M16x1.5 8
S-EGES10SM-WD-SV M16x1.5 M18x1.5 10
S-EGES12SM-WD-SV M18x1.5 M20x1.5 12
S-EGES14SM-WD-SV M20x1.5 M22x1.5 14
S-EGES16SM-WD-SV M22x1.5 M24x1.5 16
S-EGES20SM-WD-SV M27x2.0 M30x2.0 20
S-EGES25SM-WD-SV M33x2.0 M36x2.0 25
S-EGES30SM-WD-SV M42x2.0 M42x2.0 30
S-EGES38SM-WD-SV M48x2.0 M52x2.0 38

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N27

PAGE C27 N29
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

BSPP MALE X METRIC BANJO COUPLING

316 STAINLESS STEEL

Note: The BSPP threads ‘A’ are designed to be screwed into a BSPP female port block only.
The Metric threads ‘B’ are DIN Light (L) or DIN Heavy (S) and come complete with tube nut
and cutting ring.

Part No. Thread A Thread B Tube OD
(BSPP) (Metric L) (mm)
S-RSWV6LR
S-RSWV8LR 1/8” M12x1.5 6
S-RSWV10LR 1/4” M14x1.5 8
S-RSWV12LR 1/4” M16x1.5 10
S-RSWV15LR 3/8” M18x1.5 12
1/2” M22x1.5 15

Part No. Thread A Thread B Tube OD
(BSPP) (Metric S) (mm)
S-RSWV6SR
S-RSWV8SR 1/4” M14x1.5 6
S-RSWV10SR 1/4” M16x1.5 8
S-RSWV12SR 3/8” M18x1.5 10
S-RSWV14SR 3/8” M20x1.5 12
S-RSWV16SR 1/2” M22x1.5 14
1/2” M24x1.5 16

*LARGER SIZES AVAILABLE ON REQUEST

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N28

PAGE C28 N30
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

METRIC FEMALE SWIVEL X METRIC
TUBE REDUCER LIGHT (L) SERIES

316 STAINLESS STEEL

Note: The Metric threads ‘A’ are DIN Light (L) Female Swivel and will screw onto the
equivalent Metric Male thread. The Metric threads ‘B’ are DIN Light (L) and come complete
with Tube Nut & Cutting Ring.

Part No. Thread A Thread B Tube OD Tube OD
(Metric L FS) (Metric L) A (mm) B (mm)

S-REDV8/6L-SV M14x1.5 M12x1.5 8 6
S-REDV10/6L-SV M16x1.5 M12x1.5 10 6
S-REDV10/8L-SV M16x1.5 M14x1.5 10 8
S-REDV12/6L-SV M18x1.5 M12x1.5 12 6
S-REDV12/8L-SV M18x1.5 M14x1.5 12 8
S-REDV12/10L-SV M18x1.5 M16x1.5 12 10
S-REDV15/6L-SV M22x1.5 M12x1.5 15 6
S-REDV15/8L-SV M22x1.5 M14x1.5 15 8
S-REDV15/10L-SV M22x1.5 M16x1.5 15 10
S-REDV15/12L-SV M22x1.5 M18x1.5 15 12
S-REDV18/6L-SV M26x1.5 M12x1.5 18 6
S-REDV18/8L-SV M26x1.5 M14x1.5 18 8
S-REDV18/10L-SV M26x1.5 M16x1.5 18 10
S-REDV18/12L-SV M26x1.5 M18x1.5 18 12
S-REDV18/15L-SV M26x1.5 M22x1.5 18 15
S-REDV22/6L-SV M30x2.0 M12x1.5 22 6
S-REDV22/8L-SV M30x2.0 M14x1.5 22 8
S-REDV22/10L-SV M30x2.0 M16x1.5 22 10
S-REDV22/12L-SV M30x2.0 M18x1.5 22 12
S-REDV22/15L-SV M30x2.0 M22x1.5 22 15
S-REDV22/18L-SV M30x2.0 M26x1.5 22 18
S-REDV28/6L-SV M36x2.0 M12x1.5 28 6
S-REDV28/8L-SV M36x2.0 M14x1.5 28 8
S-REDV28/10L-SV M36x2.0 M16x1.5 28 10
S-REDV28/12L-SV M36x2.0 M18x1.5 28 12
S-REDV28/15L-SV M36x2.0 M22x1.5 28 15
S-REDV28/18L-SV M36x2.0 M26x1.5 28 18
S-REDV28/22L-SV M36x2.0 M30x2.0 28 22

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N29

PAGE C29 N31
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

METRIC FEMALE SWIVEL X METRIC
TUBE REDUCER LIGHT (L) SERIES

316 STAINLESS STEEL

Note: The Metric threads ‘A’ are DIN Light (L) Female Swivel and will screw onto the
equivalent Metric Male thread. The Metric threads ‘B’ are DIN Light (L) and come complete
with Tube Nut & Cutting Ring.

Part No. Thread A Thread B Tube OD Tube OD
(Metric L FS) (Metric L) A (mm) B (mm)

S-REDV35/8L-SV M45x2.0 M14x1.5 35 8

S-REDV35/10L-SV M45x2.0 M16x1.5 35 10

S-REDV35/12L-SV M45x2.0 M18x1.5 35 12

S-REDV35/15L-SV M45x2.0 M22x1.5 35 15

S-REDV35/18L-SV M45x2.0 M26x1.5 35 18

S-REDV35/22L-SV M45x2.0 M30x2.0 35 22

S-REDV35/28L-SV M45x2.0 M36x2.0 35 28

S-REDV42/10L-SV M52x2.0 M16x1.5 42 10

S-REDV42/12L-SV M52x2.0 M18x1.5 42 12

S-REDV42/15L-SV M52x2.0 M22x1.5 42 15

S-REDV42/18L-SV M52x2.0 M26x1.5 42 18

S-REDV42/22L-SV M52x2.0 M30x2.0 42 22

S-REDV42/28L-SV M52x2.0 M36x2.0 42 28

S-REDV42/35L-SV M52x2.0 M45x2.0 42 35

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N30

PAGE C30 N32
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

METRIC FEMALE SWIVEL X METRIC
TUBE REDUCER HEAVY (S) SERIES

316 STAINLESS STEEL

Note: The Metric threads ‘A’ are DIN Heavy (S) Female Swivel and will screw onto the
equivalent Metric Male thread. The Metric threads ‘B’ are DIN Heavy (S) and come complete
with Tube Nut & Cutting Ring.

Part No. Thread A Thread B Tube OD Tube OD
(Metric S FS) (Metric S) A (mm) B (mm)

S-REDV8/6S-SV M16x1.5 M14x1.5 8 6
S-REDV10/6S-SV M18x1.5 M14x1.5 10 6
S-REDV10/8S-SV M18x1.5 M16x1.5 10 8
S-REDV12/6S-SV M20x1.5 M14x1.5 12 6
S-REDV12/8S-SV M20x1.5 M16x1.5 12 8
S-REDV12/10S-SV M20x1.5 M18x1.5 12 10
S-REDV14/6S-SV M22x1.5 M14x1.5 14 6
S-REDV14/8S-SV M22x1.5 M16x1.5 14 8
S-REDV14/10S-SV M22x1.5 M18x1.5 14 10
S-REDV14/12S-SV M22x1.5 M20x1.5 14 12
S-REDV16/6S-SV M24x1.5 M14x1.5 16 6
S-REDV16/8S-SV M24x1.5 M16x1.5 16 8
S-REDV16/10S-SV M24x1.5 M18x1.5 16 10
S-REDV16/12S-SV M24x1.5 M20x1.5 16 12
S-REDV16/14S-SV M24x1.5 M22x1.5 16 14
S-REDV20/6S-SV M30x2.0 M14x1.5 20 6
S-REDV20/8S-SV M30x2.0 M16x1.5 20 8
S-REDV20/10S-SV M30x2.0 M18x1.5 20 10
S-REDV20/12S-SV M30x2.0 M20x1.5 20 12
S-REDV20/14S-SV M30x2.0 M22x1.5 20 14
S-REDV20/16S-SV M30x2.0 M24x1.5 20 16
S-REDV25/6S-SV M36x2.0 M14x1.5 25 6
S-REDV25/8S-SV M36x2.0 M16x1.5 25 8
S-REDV25/10S-SV M36x2.0 M18x1.5 25 10
S-REDV25/12S-SV M36x2.0 M20x1.5 25 12
S-REDV25/14S-SV M36x2.0 M22x1.5 25 14
S-REDV25/16S-SV M36x2.0 M24x1.5 25 16
S-REDV25/20S-SV M36x2.0 M30x2.0 25 20

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N31

PAGE C31 N33
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

METRIC FEMALE SWIVEL X METRIC
TUBE REDUCER HEAVY (S) SERIES

316 STAINLESS STEEL

Note: The Metric threads ‘A’ are DIN Heavy (S) Female Swivel and will screw onto the
equivalent Metric Male thread. The Metric threads ‘B’ are DIN Heavy (S) and come complete
with Tube Nut & Cutting Ring.

Part No. Thread A Thread B Tube OD Tube OD
(Metric S FS) (Metric S) A (mm) B (mm)

S-REDV30/20S-SV M42x2.0 M30x2.0 30 20
S-REDV30/25S-SV M42x2.0 M36x2.0 30 25
S-REDV38/20S-SV M52x2.0 M30x2.0 38 20
S-REDV38/25S-SV M52x2.0 M36x2.0 38 25
S-REDV38/30S-SV M52x2.0 M42x2.0 38 30

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N32

PAGE C32 N34
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

METRIC BLANKING PLUG

316 STAINLESS STEEL

Note: Combine the below Blanking Plug with the matching Tube Nut from Page C1 to blank off
a Metric Male thread with 24 degree cone. Sizes 6mm -12mm are suitable for both Light (L) &
Heavy (S) Tube Nuts.

Part No. Diameter A Tube OD
(mm) (mm)
S-VS6L/S
S-VS8L/S 6 6
S-VS10L/S 8 8
S-VS12L/S 10 10
12 12
S-VS15L
S-VS18L 15 15
S-VS22L 18 18
S-VS28L 22 22
S-VS35L 28 28
S-VS42L 35 35
42 42
S-VS14S
S-VS16S 14 14
S-VS20S 16 16
S-VS25S 20 20
S-VS30S 25 25
S-VS38S 30 30
38 38

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N33

PAGE C33 N35
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

METRIC TUBE BLANKING PLUG

316 STAINLESS STEEL

Note: The thread ‘A’ is Metric DIN Light (L) or DIN Heavy (S) and is designed to blank off the
equivalent Metric Female Swivel thread. If screwing into a Metric Female Port block then see
Page C54 for Metric Plugs with captive seal.

Part No. Thread A Tube OD
(Metric L) (mm)
S-VSA6L
S-VSA8L M12x1.5 6
S-VSA10L M14x1.5 8
S-VSA12L M16x1.5 10
S-VSA15L M18x1.5 12
S-VSA18L M22x1.5 15
S-VSA22L M26x1.5 18
S-VSA28L M30x2.0 22
S-VSA35L M36x2.0 28
S-VSA42L M45x2.0 35
M52x2.0 42

Part No. Thread A Tube OD
(Metric S) (mm)
S-VSA6S
S-VSA8S M14x1.5 6
S-VSA10S M16x1.5 8
S-VSA12S M18x1.5 10
S-VSA14S M20x1.5 12
S-VSA16S M22x1.5 14
S-VSA20S M24x1.5 16
S-VSA25S M30x2.0 20
S-VSA30S M36x2.0 25
S-VSA38S M42x2.0 30
M52x2.0 38

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N34

PAGE C34 N36
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

METRIC ALLEN KEY HEX & CAPTIVE SEAL PLUG

316 STAINLESS STEEL

Note: The Metric thread ‘A’ has a captive seal and is designed to be screwed into a Metric
Female port block only. If screwing into a Metric Female Swivel thread then see Page C34 for
Metric Plugs with 24 degree sealing cone.

Part No. Thread A
(Metric Ports)
S-VSM10x1.0-WD
S-VSM12x1.5-WD M10x1.0mm
S-VSM14x1.5-WD M12x1.5mm
S-VSM16x1.5-WD M14x1.5mm
S-VSM18x1.5-WD M16x1.5mm
S-VSM20x1.5-WD M18x1.5mm
S-VSM22x1.5-WD M20x1.5mm
S-VSM26x1.5-WD M22x1.5mm
S-VSM27x2.0-WD M26x1.5mm
S-VSM33x2.0-WD M27x2.0mm
S-VSM42x2.0-WD M33x2.0mm
S-VSM48x2.0-WD M42x2.0mm
M48x2.0mm

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N35

PAGE C35 N37
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

METRIC TUBE FITTING PRE-ASSEMBLY TOOLS

Note: ALL Stainless Steel Tube Cutting Rings must be pre-formed onto the tube using carbon
steel fitting bodies or the below special hardened pre-assembly tools. NC Rings must be pre-
assembled with the special NC Ring pre-assembly studs only. Only once the Cutting Ring or
NC Ring is pre-formed can it then be done up onto the stainless steel body final assembly.

The threads ‘A’ are Metric DIN Light (L) or DIN Heavy (S).

Cutting Ring Tool NC Ring Tool Thread A Tube OD
(Metric L) (mm)
Part No. Part No.
M12x1.5 6
P-VK6L P-NCVK6L M14x1.5 8
P-VK8L P-NCVK8L M16x1.5 10
P-VK10L P-NCVK10L M18x1.5 12
P-VK12L P-NCVK12L M22x1.5 15
P-VK15L P-NCVK15L M26x1.5 18
P-VK18L P-NCVK18L M30x2.0 22
P-VK22L P-NCVK22L M36x2.0 28
P-VK28L P-NCVK28L M45x2.0 35
P-VK35L M52x2.0 42
P-VK42L

Cutting Ring Tool NC Ring Tool Thread A Tube OD
(Metric S) (mm)
Part No. Part No.
M14x1.5 6
P-VK6S P-NCVK6S M16x1.5 8
P-VK8S P-NCVK8S M18x1.5 10
P-VK10S P-NCVK10S M20x1.5 12
P-VK12S P-NCVK12S M22x1.5 14
P-VK14S P-NCVK14S M24x1.5 16
P-VK16S P-NCVK16S M30x2.0 20
P-VK20S P-NCVK20S M36x2.0 25
P-VK25S P-NCVK25S M42x2.0 30
P-VK30S P-NCVK30S M52x2.0 38
P-VK38S

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N36

PAGE C36 N38
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

METRIC WELDING NIPPLE

316 STAINLESS STEEL

Note: Combine the below Welding Nipple with the matching Tube Nut from Page C1. Slip the
Tube Nut onto the Nipple before butt-welding the Nipple onto the Tube. These are ideal as
an alternative to the cutting ring when encountering extra high pressure, pulsing or vibration
in hydraulic systems. There is also an ‘O’ring for extra safety. Recommended for Metric DIN
Heavy (S) fittings only. After assembly they will screw onto any Metric Male thread with 24
degree sealing cone.

Part No. Diameter A Wall Working Pressure
(mm) (mm) (BAR)
S-SN8
S-SN10 8 2 630
S-SN12 10 2 630
S-SN16 12 2.5 630
S-SN20x3 16 3 400
S-SN20x4 20 3 315
S-SN25x4 20 4 400
S-SN30x4 25 4 400
S-SN30x5 30 4 250
S-SN30x6 30 5 315
S-SN38x4 30 6 400
S-SN38x5 38 4 200
S-SN38x6 38 5 250
S-SN38x7 38 6 315
38 7 400

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N37

PAGE C37 N39
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

WELDING STUD COUPLING

316 STAINLESS STEEL

Note: Threads ‘A’ are Metric DIN Light (L) or DIN Heavy (S) and come complete with Tube Nut
and Cutting Ring. End ‘B’ is designed to be welded.

Part No. Thread A Dimension B Tube OD
(Metric L) (mm) (mm)
S-ASV6L
S-ASV8L M12x1.5 10 6
S-ASV10L M14x1.5 12 8
S-ASV12L M16x1.5 14 10
S-ASV15L M18x1.5 16 12
S-ASV18L M22x1.5 19 15
S-ASV22L M26x1.5 22 18
S-ASV28L M30x2.0 27 22
S-ASV35L M36x2.0 32 28
S-ASV42L M45x2.0 40 35
M52x2.0 46 42

Part No. Thread A Dimension B Tube OD
(Metric S) (mm) (mm)
S-ASV6S
S-ASV8S M14x1.5 11 6
S-ASV10S M16x1.5 13 8
S-ASV12S M18x1.5 15 10
S-ASV14S M20x1.5 17 12
S-ASV16S M22x1.5 19 14
S-ASV20S M24x1.5 21 16
S-ASV25S M30x1.5 26 20
S-ASV30S M36x2.0 31 25
S-ASV38S M42x2.0 36 30
M52x2.0 44 38

Note: Exmar anti-seize paste should be used for assembly of Stainless Steel threads.

PH: 0800 FITTINGS 24 HOURS. N38

PAGE C38 N40
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

STAINLESS STEEL METRIC TUBE FITTINGS

The EXMAR Stainless Steel Metric Tube Fitting manufactured to the international standard
DIN 2353 is for use in the connection of tubing for fluid transfer. There is no need for flaring or
welding of the tube. The couplings are now available with two types of rings to suit a multitude
of applications. These include chemical and petrochemical plant and equipment, paper, plas-
tic, boatbuilding and aircraft industries, offshore, measurement and control as well as hydrau-
lic systems and installations subject to highly corrosive conditions.

Ring Type 1: Standard Two Edge Cutting Ring: Physically cutting into the surface of
the tube this ring is suitable for general purpose hydraulics or most
fluids. It utilizes a proven cutting edge design used internationally for
decades.

Ring Type 2: New ‘NC’ Clamping Ring: Swages the outside of the tube slightly
deforming the inside and is suitable for all applications including some
gases where a guaranteed leak free connection and superior corrosion
resistance is required. NC Rings are Helium tight and approved for high
pressure gas to 250 bar under DVEW approval No. DE-4502 AT 0344.
The pressure rating of the NC Ring in hydraulic applications is the same
as the standard two edge Cutting Ring.

ASSEMBLY OF 316 STAINLESS STEEL FITTINGS

Stainless Steel threads are prone to picking up on each other (‘cold-welding’). It is strongly rec-
ommended that all threads receive a coating of Anti-Seize Paste before assemble to minimise
the chances of this happening.

EXMAR Anti-Seize Paste has been specifically developed for use with their 316 Stainless
Steel Hose Fittings and Tube Fittings.

Part No. Description

ASP-120G EXMAR Anti Seize Paste - 120 gram bottle
ASP-250G EXMAR Anti Seize Paste - 250 gram tin

Do not use force or cross thread the fittings at the start of assembly. The parts will fit
together by hand and only need spanners to complete the final tightening.

PH: 0800 FITTINGS 24 HOURS. N41
PH: 0800 FITTiINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

TUBE FITTING WORKING PRESSURES &
THREAD DIMENSIONS

Series Tube Dia Working Pressure
(mm) (BAR)
LL
4-12mm 100
L
L 6-18mm 315
22-42mm 160
S
S 6-14mm 630
S 16-30mm 400
315
38mm

Series øTube Metric Thread d1 d2B11 d4+0.1 L3 L8+0.3
LL
L 4 M8x1 3 45 8 4
6 M10x1
S 8 M12x1.5 4.5 6 7.5 8 5.5
6 M12x1.5
8 M14x1.5 6 8 9.5 9 5.5
10 M16x1.5
12 M18x1.5 4 6 8.1 10 7
15 M22x1.5
18 M26x1.5 6 8 10.1 10 7
22 M30x2
28 M36x2 8 10 12.3 11 7
35 M45x2
42 M52x2 10 12 14.3 11 7
6 M14x1.5
8 M16x1.5 12 15 17.3 12 7
10 M18x1.5
12 M20x1.5 15 18 20.3 12 7.5
14 M22x1.5
16 M24x1.5 19 22 24.3 14 7.5
20 M30x2
25 M36x2 24 28 30.3 14 7.5
30 M42x2
38 M52x2 30 35 38 16 10.5

36 42 45 16 11

4 6 8.1 12 7

5 8 10.1 12 7

7 10 12.3 12 7.5

8 12 14.3 12 7.5

10 14 16.3 14 8

12 16 18.3 14 8.5

16 20 22.9 16 10.5

20 25 27.9 18 12

25 30 33 20 13.5

32 38 41 22 16

PH: 0800 FITTINGS 24 HOURS. N42
PH: 0800 FITTiIiNGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

TECHNICAL INFORMATION

STANDARD TWO EDGE CUTTING RING

AREAS OF APPLICATION

EXMAR Cutting ring fittings in accordance with EN ISO 8434-1 / DIN 2353 serve to connect
even ended tubes.

Three ranges of couplings (LL, L and S), in accordance with the DIN norm, cover a pressure
range up to 630 bar.

The areas of application for stainless steel cutting ring couplings extend from chemical and
petrochemical plant and equipment, through pharmaceutical, paper, plastic, shipbuilding and
aircraft industries, sluice applications, off-shore, measurement and control, as well as highly
corrosive hydraulic systems and installations.

On tightening the nut (1) the cutting ring (2) is pressed into the inner taper (3) of the coupling
stud (4) and into the tube (5).

The hardened cutting edge (6) cuts into the tube (5) and forms a circumferential bead in front
of the cutting edge.

The design form of the cutting ring determines the cut-in depth. A tapered nut/cutting ring
interface results in the cutting ring being pressed into the tube (7), thereby providing additional
support and relief to the cut-in zone under dynamic load conditions.
The mechanical and frictional principle of the cutting ring system guarantees a secure tube
connection.

PH: 0800 FITTINGS 24 HOURS. N43
PH: 0800 FITTiiIiNGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

TECHNICAL INFORMATION

STANDARD TWO EDGE CUTTING RING CONT.

NORM
EXMAR Couplings are manufactured to respective DIN standards.
Couplings outside standard norms are produced with tube connections according to DIN
3861. All further dimensions conform to the respective standards. Individual coupling studs
are produced in accordance with DIN 3852 Part 1 and 2 as standard. Studs with NPT threads
deviate from the DIN standard, and are manufactured to ANSI B1.20.1-1983.

MATERIAL
EXMAR Couplings are manufactured from AISI 316 ti material. Couplings can also be supplied

in hasteloy, titanium, and other high quality alloys. Material certification to DIN specification is

available on request. Material test and control service possible.

PRESSURE RANGE

Range Tube Nominal pressure
PN 100 (bar)
LL: extra light 4-12 mm PN 315 (bar)
PN 160 (bar)
L: light 6-18 mm PN 630 (bar)
PN 400 (bar)
22-42 mm PN 315 (bar)

S: heavy 6-14 mm

16-30 mm

38 mm

The couplings are designed to guarantee a safety factor of 4 on the stated nominal pressure.
By normal and undynamic loading and temperatures up to 120 °C the operating pressure can
be regarded as the nominal pressure. By abnormal and highly dynamic conditions (vibration,
pulsing, etc.) the use of “S” range couplings is recommended. A strong, solid, stress free, and
secure mounting system is pre-requisite.

REDUCTION IN PRESSURE

Material 1.4571 allows a reduction in pressure as a function of temperature. (DIN 17440, DIN

17458)

Temperature Reduction in pressure

- 60 °C to + 20 ° -

+ 50 °C 4,5 %

+ 100 °C 11,0 %

+ 200 °C 20,0 %

+ 300 °C 29,0 %

+ 400 °C 33,0 %

Attention: If different fitting and sealing materials are used, the lowest temperature as
indicated for each material is applicable!

PH: 0800 FITTINGS 24 HOURS. N44
PH: 0800 FITTivINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

ASSEMBLY INSTRUCTIONS

STANDARD TWO EDGE CUTTING RING

a). For turning-angle-controlled assembly in pre-assembly adaptor.
The pre-assembly of EXMAR couplings should be carried out in a hardened pre-assembly
fixture.

1. Saw tube end square (a common tube 4. Lightly coat the taper and thread of the
cutting fixture simplifies and ensures a fixture, also the cutting ring and nut thread,
perfect end). Do not use a tube cutter. with EXMAR grease.

2. Lightly deburr inner and outer edges. 5. Position nut and cutting ring on the tube
end.

3. Firmly clamp the pre-ssembly fixture, with 6. Fully insert the tube end in the fixture until
respective tube diameter, in a vise. firmly against the stop, and screw the nut as
far as possible by hand so that the cutting
ring lies firmly between the tube and nut.
Ensure that the tube end butts against the
fixture stop otherwise the cutting ring cannot
cut into the tube.

PH: 0800 FITTINGS 24 HOURS. N45
PH: 0800 FITTvIiNGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

ASSEMBLY INSTRUCTIONS

STANDARD TWO EDGE CUTTING RING CONT.

7. When using perfect raw material the tube 10. To control the cutting ring cut-in, loosen
can be inserted in the fixture, up to the stop, the nut. The bead (see the picture) in front
without force, otherwise check the tube end of the cutting edge should be visible. If not,
for deformation or surface defect. a further tightening is necessary.

8. Tighten nut, with the respective spanner, 11. The cutting ring can be turned on the
approx. 1 turn, a mark (felt pen or similar) tube when the nut is disconnected. This is
on the nut and tube simplifies control of irrelevant to the function of the coupling.
the turn (the tube should not turn during The reassembly of the coupling requires no
tightening). further force. Hold the coupling body fixed
using the respective spanner.

9. Remove the pre-assembled tube from
the fixture, and insert in the coupling. The
finished assembly is completed by a final
tightening of the nut by approx. 1/2 turn.

PH: 0800 FITTINGS 24 HOURS. N46
PH: 0800 FITTvIiNi GS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

ASSEMBLY INSTRUCTIONS

STANDARD TWO EDGE CUTTING RING CONT.

b). Assembly in Coupling Body.
Direct assembly in a coupling body is carried out similarly to pre-assembly in a fixture, except that the
final assembly is completed in the same process. The marked nut is finally tightened approx. 1 1/4 to 1
1/2 turns so that the coupling is completely assembled. Control the cutting ring and bead as described
in a). “In Pre-Assembly Fixture”.
Caution: This form of assembly is not recommended for Stainless Steel fittings.

Note:
For the pre-assembly of couplings only use
hardened fixtures.
With use, even hardened fixtures are subject to
wear, therefore, periodically inspect the accuracy
and tolerance of the taper.
By wear and non-confirmity replace the fixture.

The assembly of a coupling can be eased by loosening the coupling nut each time the tightening torque
becomes excessive.
In the case of large diameter tubes the assembly can be considerably eased by releasing the coupling
nut and retreating the contact surfaces with assembly grease.
The high strength of AISI 316 ti material presents a considerably higher cutting ring resistance than
carbon steel, and therefore results in a less heavy bead build up than is typical with carbon steel.
An special oxygen- compatible assembly grease is available on request for use with couplings to be
used in oxygen based applications.

ASSEMBLY:
Minimum length for straight end of tube bends.
When bending tubes, at least twice the depth of the nut should be allowed from the end of the tube to
the beginning of the radius.

Recommended Tubes:
For our stainless steel couplings we recommend the use of scale free cold drawn stainless steel tube,
heat treated to DIN 17456/17458, and tolerances to EN 10 305-1. Material AISI 316 ti or equivalent
with certification according to DIN 10 204. A selection of tube and wall thickness sizes is presented in
the table below.
Max. Hardness: HRB 90
We recommend the use of our reinforcing-rings with the tube sizes indicated. The wall thickness and
tube diameter with respect to calculated pressure is based on DIN 2413, condition 1, relative to wall
thickness specifications EN 10 305-1, Safety factor: 1.5.

Corrosion factor not considered. The calculated
pressures are based on the following parameters:

1% Yield point at:
20 °C = 265 N/mm²
50 °C = 240 N/mm²

100 °C = 220 N/mm² (DIN 17 440)

PH: 0800 FITTINGS 24 HOURS. N47
PH: 0800 FITTviIiNi GS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

TECHNICAL INFORMATION

NC CUTTING RINGS

Areas of Application:
EXMAR NC-clamping ring fittings to even ended tubes according 24° cutting ring couplings
DIN 8434-1. In accordance with the DIN norm 2 ranges of fittings (S and L), cover a pressure
range up to 630 bar.

The applications for the NC-clamping ring fittings are the chemical and petrochemical plant
and equipment, pharmaceutical industry, Paper and Plastic industry, Harbor- and sluice
applications, shipbuilding and off-shore industry, measure and control applications and also
highly corrosive hydraulic systems and installations.

Norm
NC-clamping ring fittings are manufactured in accordance with the DIN norm. Fittings without
standard norms are manufactured with taper connections according to DIN 3861. All further
dimensions are in accordance with the standards.
Studs are produced in accordance with DIN 3852 Part 1 and 2 as standard. Studs with NPT
threads according to ANSI B1.20.1-1983 are possible.

Material
NC-clamping ring fittings are made from Stainless steel AISI 316ti as standard.

Other materials for example hasteloy, titanium, and other high quality alloys are possible.
Material certificates in accordance with DIN standards are available on request. Also available
on request are special tests.

PH: 0800 FITTINGS 24 HOURS. N48
PH: 0800 FITTixINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

TECHNICAL INFORMATION

NC CUTTING RINGS CONT.

Pressure range:

Range Tube Nominal pressure
L: light 6-18mm PN 315 (bar)
PN 160 (bar)
22mm
PN 630 (bar)
S: heavy 6-14mm PN 400 (bar)
16-25mm

NC-clamping ring fittings are designed for a safety factor of 4 times on the stated nominal
pressures. Under normal conditions and temperatures up to 120° C the operating pressures
are the same than the nominal pressures.
Under highly dynamic conditions (vibration, pulsing, etc.) we recommend the “S“ range. A
stress free, solid mounting system is required.

Reduction in pressure:
Material 1.4571 allows a reduction in pressure as a function of temperature.

(DIN 17440, DIN 17458).

Temperature Reduction in pressure
- 60 °C to + 20 °C ---
+ 50 °C 4,5 %
+ 100 °C 11,0 %
+ 200 °C 20,0 %
+ 300 °C 29,0 %
+ 400 °C 33,0 %

Attention: If different fitting and sealing materials are used, the lowest temperature as
indicated for each material is applicable!

FOR MORE INFORMATION ON THE NC CUTTING RINGS
PLEASE CONSULT OUR SALES STAFF

PH: 0800 FITTINGS 24 HOURS. N49
PH: 0800 FITTxINGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

ASSEMBLY INSTRUCTIONS

NC CUTTING RING

Assembly instructions:
The Exmar NC-fittings must be pre-assembled

by using the NC-assembly stud.

Assembly stud: 1. Pre-assembly
2 Sides 2. Final assembly

Tube recommendation:
The seamless precision tubes to DIN 17456/17458 should be made out of Stainless steel AISI
316 or similar. The tolerances are in accordance with D4/T3. The surface hardness should
not be more than Rockwell HRB 90 or Vickers HV 185.The tubes must be heat treated in
accordance with DIN 17458. The tubesurface should be free of any damages, careful handling
is necessary.

Tube preparation:
Cut off the pipe by using special cut-off saw fixture; deburr slightly and clean the pipe.

Pre-assemby:

The prepared tube, the nut and the NC-ring should now be lubricated with Exmar grease but
only the frictioning areas of the ring and nut. Now press the tube into the pre-assembly part
of the assembling socket and hand-tighten the nut. Make sure that the tube is firmly pressed
against the stop in the socket.
Then fasten the nut with a spanner until a clear rise of the torque can be felt (appr. 1 turn) and
carry out another 1/4 turn beyond this point.

PH: 0800 FITTINGS 24 HOURS. N50
PH: 0800 FITTxIiNGS 24 HOURS.
Return to Main Index
Return to Start of Section

HIGH QUALITY PRODUCTS EXCELLENCE IN SERVICE

ASSEMBLY INSTRUCTIONS

NC CUTTING RING CONT.

Final assembly:
The pre-assembled tube is now mounted into the final assembly-part of the assembling
socket but the frictioning parts should be lubricated in the same way as mentioned at the
pre-assembly. Now hand-tighten the nut and after that fasten the nut appr. 1 1⁄2 turns with a
spanner. Afterwards tighten the nut another 1⁄4 turn.

Note:
The final assembly is indicated by a rapid rise of the torque. Now the fitting is ready for
installation.

Installation into the tube fitting:
The final assembled pipe is after lubrication fed into the taper of the fitting. After hand-tighten
the nut, fasten by 1⁄2 turn until a sudden rise of the torque is indicated.

Re-assembly’s:
After hand-tighten the nut, fasten by 1⁄4 turn until a sudden rise of the torque is indicated.

PH: 0800 FITTINGS 24 HOURS. N51
PH: 0800 FITTxIiNi GS 24 HOURS.
Return to Main Index
Return to Start of Section