Fluid Fitting 2018_extended

HIGH QUALITY PRODUCTS BLACK / GREYSCALE VERSIONF

F FLUIDEXCELFLEitNtiCnEgsIN SERVICE

If necessary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:

Spot:

FUNCTION OF THE CUTTING RING COUPLINGBlack - Pantone Black
Grey - Cool Grey 10

CMYK:

Grey Black RGB:
Note: The below listed working pressures areCM::m00 aximuCM::m00 for the seRR:erd7i5es depBRl:ea0cnk ding on Tube size.
For individual Tube Fitting size maximum wKYo:: 07r0king pKYr::e100s0 sures seBGe:: 7755the foGBl::l0o0 wing pages of this
section before the index page.

TECHNICAL CHARACTERISTICS
The Cast fitting assures a perfect seal, independently from the fluid used, provided that no
corrosive fluids be employed and the nominal pressures not be trespassed. Fittings are
manufactured in three ranges to be chosen according to the required working conditions.
‘LL’ extra light range, suitable for low and medium working pressures up to 100 bar.
‘L’ light range, suitable for medium/high pressure applications, however not over 315 bar.
‘S’ heavy range, for severe conditions, with high pressures, water hammering, high temperatures
and a maximum pressure of 630 bar.
Vibrations according to the standards, don’t change the fitting’s performance that, even at
maximum values keeps its characteristics of absolute reliability.

PH: 0800 FITTINGS 24 HOURS. B35

Return to Start of Section Return to Main Index

HIGH QUALITY PRODUCTS BLACK / GREYSCALE VERSIONF

F FLUIDEXCELFLEitNtiCnEgsIN SERVICE

If necessary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:

Spot:
Black - Pantone Black
Grey - Cool Grey 10

CMYK:

QUALITY ASSURANCE ACCORDING TO UNI Grey 9001 Black RGB:
The Quality Assurance system complies with EUNNIICMYSE:::O000N ISO
C: 0 Red Black issued by the RINA

MY9::00001, certificaGRt::e7755 (N 90/GR9:: 004)
certification authority recognized by IQNET at EuropeK:a7n0 level. K: 100 B: 75 B: 0

CAST S.p.A. has also obtained the DVGW product omologation for stainless steel fittings, and DNV product

omologation for carbon and stainless steel fittings with B3 and B4 cutting rings. At the customer’s request, our

Quality Service will issue certificates of origin for the materials used to manufacture the products delivered.

Our Quality Experts are always ready to provide customers with advice, to guide them around our facilities as to

provide documentation of the traceability system applied.

COMPONENT TESTING
In addition to the normal dimensional checks carried out during machining, percentage inspections of the finished
product, practical tightness and fatigue tests, coupling tests between the various parts are also carried out on
CAST fittings. At the customer’s request out Product Test and Inspection Service issues the certificate of the tests
carried out: dimensional and geometrical test, checking of static seal at low and high pressure, dynamic seal at
high pressure (maximum operating pressure +33%) as per ISO 8434-5. If required by the customer, tests can be
carried out by various Third Part Authorities including: RINA - DVGW - Lloyd’s Register of Shipping - Det Norske
Veritas - Germanischer Lloyd - American Bureau of Shipping (to be specified on the order).

SAFETY FACTORS
B3 rings provide the right answer to safety problems so that absolute functional reliability between the ring, the
steel tube and the fitting body is guaranteed by the double clinching and automatic locking of the cuts on the
steel tube (assured by the particular shape of the ring).
CAST’s product range fully complies with the construction parameters of reference standards.
The nominal operating pressures (bar) given in the catalogue indicate the maximum permissible pressures
(including pressure peaks). For higher pressure the items must be tested in accordance with the manufacturer
for specific applications.
The safety factor is 4:1 and is intended with static load and with the temperature at the values indicated as
per DIN 3861 (24º cone) for tube connection. The same safety factor 4:1 is intended for parallel threaded end
fittings with elastomeric seal. For stud couplings with taper or parallel threaded end fittings with metal to metal
seal safety factor is 2.5:1.
Is understood that the product is guaranteed only if the full connection is made entirely with CAST S.p.A.
products and components.

PH: 0800 FITTINGS 24 HOURS. B36

Return to Start of Section Return to Main Index

HIGH QUALITY PRODUCTS BLACK / GREYSCALE VERSIONF

F FLUIDEXCELFLEitNtiCnEgsIN SERVICE

If necessary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:

Spot:

TUBE FITTING WORKING PRESSURESBlack - Pantone Black
Grey - Cool Grey 10

& THREAD DIMENSIONSCMYK:
Grey
Black RGB:

C: 0 C: 0 Red Black
R: 0
M: 0 M: 0 R: 75 G: 0
B: 0
Y: 0 Y: 0 G: 75

K: 70 K: 100 B: 75

Allowed for B3 Rings

• Definition of cone sizes to DIN 3861 Standards
• Thread diameters to DIN 3853 Standards

PH: 0800 FITTINGS 24 HOURS. B37

Return to Start of Section Return to Main Index

HIGH QUALITY PRODUCTS BLACK / GREYSCALE VERSIONF

F FLUIDEXCELFLEitNtiCnEgsIN SERVICE

If necessary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:

Spot:

GENERAL ASSEMBLY INSTRUCTIONSBlack - Pantone Black
Grey - Cool Grey 10

CMYK:

Grey Black RGB:
The Metric Cutting Ring Tube Fitting will onlCMy::00functioMCn::00 100% if aRRse: d7s5 embleBRl:da0ckcorrectly. Over the
whole tightening phase the tube must be in toYK::u070ch withKY:: 10t0h0 e inner pBGa:: 77r55t of thBGe:: 00body of the fitting. If
this does not happen the ring will advance with the tube without indenting it and would cause

failure of the connection.

The fitting should not be used to correct a wrong tube alignment or to be a support for the tube.

Extremely long tube or tube undergoing high stress has to be fixed by Tube Clamps (Section

E) or some type of support to avoid excessive vibration that could cause premature failure of

the fittings and or system.

CARBON STEEL FITTINGS
High quality tube must be used to assure correct performance of the Tube Fitting. Use of tube
which is not compliant with the below standard may seriously impair the efficiency of the fitting
and also voids any guarantee from the fitting manufacturer. Use the following tube only: ST
37.4 Cold Drawn Seamless to DIN 2391/C (Section E of this catalogue). Maximum permissible
hardness is 75 HRB.

All carbon steel tube with a diameter of more than 10mm must be pre-assembled with hardened
blocks or a fitting clamped in a vice. Remember to oil the thread, nut and ring. Once the ring
has been pre-formed onto the tube using the instructions on the next page, undo the nut from
the pre-assembly block or fitting then final assembly onto the desired stud body, tee, elbow etc
can be effected.

STAINLESS STEEL FITTINGS
High quality tube must be used to assure correct performance of the Tube Fitting. Use of
tube which is not compliant with the below standard may seriously impair the efficiency of the
fitting and also voids any guarantee from the fitting manufacturer. Use the following tube only:
1.4571 316SS Cold Drawn Seamless Tube to ASTM A269 (Section D). Maximum permissible
hardness is 85 HRB.

FOR METRIC STAINLESS STEEL TUBE FITTING ASSEMBLY PLEASE ASK FOR THE
STAINLESS STEEL CATALOGUE.

LUBRICATION DURING ASSEMBLY
The proper lubrication of components during assembly is essential! We advise to use mineral
oils for carbon steel fittings. An anti-seizing compound (EXMAR ANTI-SEIZE PASTE) is an
absolute must for assembly of stainless steel fittings.

Part No. Description

ASP-120G EXMAR Anti Seize Paste - 120 gram bottle
ASP-250G EXMAR Anti Seize Paste - 250 gram tin

PH: 0800 FITTINGS 24 HOURS. B38

Return to Start of Section Return to Main Index

HIGH QUALITY PRODUCTS BLACK / GREYSCALE VERSIONF

F FLUIDEXCELFLEitNtiCnEgsIN SERVICE

If necessary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:

Spot:
Black - Pantone Black
Grey - Cool Grey 10

CMYK:

Grey Black RGB:
ASSEMBLY INSTRUCTIONS ACCORDING TO DINCM3::00859-2 FCMO::0R0 B3
Red Black
R: 75 R: 0

Y: 0 Y: 0 G: 75 G: 0

1. Before pre-assembly, make sure that all the tools tKo: 7b0 e usedK:a1r0e0 in perfectB:w75orking oBr: d0 er. Replace any

inefficient tools.

2. The segment of tube to be pre-assembled must have a straight section at least twice the length of the nut

(length H). Roundness must comply with the DIN 2391.

3. Cut the tube square by using an appropriate hack-saw (do not use roller type tube cutters). Check that the

cut is properly made at 90 deg. Remove any internal and external burrs.

4. Oil the 24 deg. cone, the thread of the body, the cutting ring and the nut with suitable products.

5. Fit the nut and the cutting ring on the tube as shown. The larger diameter of the cutting ring must face the

nut.

6. Insert the tube on the 24 deg. cone until it comes into contact with the stop. Tighten the nut by hand until the

cutting ring rests firmly on the nut. Then tighten the nut with a wrench until the cutting edge of the ring is in

contact with the tube and prevents rotation of this.

7. Holding the tube against its stop and making sure it does not rotate, tighten the nut by 3/4 of a turn. This way,

the cutting edge of the nut cuts into the outer part of the tube for the necessary depth and raises an edge in

front of its cutting edge while the second cutting edge clinches the tube at the same time.

8. Loosen the nut and check that there is a clearly raised edge all around the tube. The edge must cover 80%

of the front of the cutting ring. This check is peremptory for the safety of all concerned! If the raised edge is

not satisfactory, pre-assembly must be repeated.

9. If pre-assembly has been carried out correctly, fit the tube on the machine, close with a wrench until a certain

resistance is encountered and then tighten for a further 1/4 turn with a wrench to wrench contrast.

10. All the pre-assembly of stainless steel fittings must be performed with pre-assembly tool (blocks or

machines).

PH: 0800 FITTINGS 24 HOURS. B39

Return to Start of Section Return to Main Index

Return to Start of Section Return to Main Index

HIGH QUALITY PRODUCTS BLACK / GREYSCALE VERSIONF

F FLUIDEXCELFLEitNtiCnEgsIN SERVICE

If necessary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:

Spot:

Black - Pantone Black

Grey - Cool Grey 10

SECTION C - METRIC HYDCRMYKA: ULIC ADAPTOR FITTINGS
Grey Black RGB:

VISUAL INDEXC: 0 C: 0 Red Black
M: 0M: 0R: 75 R: 0
Y: 0Y: 0G: 75 G: 0

K: 70 K: 100 B: 75 B: 0

Metric Port Fittings

METRIC DOWTY SEAL METRIC PORT X METRIC PORT BSPP X METRIC PORTADAPTOR
(DS-M...)
C2 ADAPTOR (A6161...) C2 (A1061...) C3

BSPT X METRIC PORTADAPTOR JIC X METRIC PORT ADAPTOR ORFS X METRIC PORT ADAPTOR

(A2261...) C3 (A5061...) C4 (A8861..) C4

METRIC FEMALE HighPressure METRIC Adj X JIC 90 ELBOW METRIC Plug Allen Key Hex

Socket (A7575...) C5 (B8350...) C5 Capt Seal (P-VSM...) C6

PH: 0800 FITTINGS 24 HOURS. C1

Return to Start of Section Return to Main Index

METRIC DOWTY SEAL METRIC PORT X METRIC PORT
ADAPTOR

A A B

Part No DIMENSION A Part No Thread A Thread B
(MM ID) (METRIC (METRIC
DS-M08 8 A61611010 PORT) PORT)
DS-M10 10 A61611212 M10X1.0 M10X1.0
DS-M12 12 A61611214 M12X1.5 M12X1.5
DS-M14 14 A61611414 M12X1.5 M14X1.5
DS-M16 16 A61611416 M14X1.5 M14X1.5
DS-M18 18 A61611418 M14X1.5 M16X1.5
DS-M20 20 A61611422 M14X1.5 M18X1.5
DS-M22 22 A61611616 M14X1.5 M22X1.5
DS-M24 24 A61611618 M16X1.5 M16X1.5
DS-M26 26 A61611620 M16X1.5 M18X1.5
DS-M27 27 A61611622 M16X1.5 M20X1.5
DS-M30 30 A61611818 M16X1.5 M22X1.5
DS-M33 33 A61611820 M18X1.5 M18X1.5
DS-M42 42 A61612020 M18X1.5 M20X1.5
DS-M48 48 A61612022 M20X1.5 M20X1.5
A61612222 M20X1.5 M22X1.5
A61612226 M22X1.5 M22X1.5
A61612626 M22X1.5 M26X1.5
A61612630 M26X1.5 M26X1.5
A61613030 M26X1.5 M30X1.5
A61613038 M30X1.5 M30X1.5
A61613838 M30X1.5 M38X1.5
A61613845 M38X1.5 M38X1.5
A61614545 M38X1.5 M45X1.5
M45X1.5 M45X1.5

Return to Start of Section C2

Return to Main Index

BSPP X METRIC PORT ADAPTOR BSPT X METRIC PORT ADAPTOR

AB AB

Part No Thread A Thread B Part No Thread A Thread B
(BSPP) (METRIC (BSPT) (METRIC
A10610210 PORT) A22610410 PORT)
A10610214 1/8” M10X1.0 A22610412 1/4” M10X1.0
A10610410 1/8” M14X1.5 A22610414 1/4” M12X1.5
A10610412 1/4” M10X1.0 A22610416 1/4” M14X1.5
A10610414 1/4” M12X1.5 A22610418 1/4” M16X1.5
A10610610 1/4” M14X1.5 A22610420 1/4” M18X1.5
A10610612 3/8” M10X1.0 A22610612 1/4” M20X1.5
A10610614 3/8” M12X1.5 A22610614 3/8” M12X1.5
A10610616 3/8” M14X1.5 A22610616 3/8” M14X1.5
A10610618 3/8” M16X1.5 A22610618 3/8” M16X1.5
A10610622 3/8” M18X1.5 A22610620 3/8” M18X1.5
A10610814 3/8” M22X1.5 A22610622 3/8” M20X1.5
A10610816 1/2” M14X1.5 A22610626 3/8” M22X1.5
A10610818 1/2” M16X1.5 A22610816 3/8” M26X1.5
A10610820 1/2” M18X1.5 A22610818 1/2” M16X1.5
A10610822 1/2” M20X1.5 A22610820 1/2” M18X1.5
A10611218 1/2” M22X1.5 A22610822 1/2” M20X1.5
A10611220 3/4” M18X1.5 A22610826 1/2” M22X1.5
A10611222 3/4” M20X1.5 A22610827 1/2” M26X1.5
A10611226 3/4” M22X1.5 A22610833 1/2” M27X2.0
A10611230 3/4” M26X1.5 A22611226 1/2” M33X2.0
A10611626 3/4” M30X1.5 A22611227 3/4” M26X1.5
A10611630 1” M26X1.5 A22611233 3/4” M27X2.0
A10611638 1” M30X1.5 A22611242 3/4” M33X2.0
A10612030 1” M38X1.5 A22611633 3/4” M42X2.0
A10612038 1.1/4” M30X1.5 A22611642 1” M33X2.0
A10612438 1.1/4” M38X1.5 A22611648 1” M42X2.0
A10612445 1.1/2” M38X1.5 A22612042 1” M48X2.0
A10613245 1.1/2” M45X1.5 A22612448 1.1/4” M42X2.0
2” M45X1.5 1.1/2” M48X2.0

Return to Start of Section C3

Return to Main Index

JIC X METRIC PORT ADAPTOR ORFS X METRIC PORT ADAPTOR

AB AB

Part No Thread A Thread B Part No Thread A Thread B
(JIC) (METRIC PORT) (ORFS) (METRIC PORT)
A50610710 7/16” M10X1.0 A88610910 9/16” M10X1.0
A50610712 7/16” M12X1.5 A88610912 9/16” M12X1.5
A50610810 1/2” M10X1.0 A88610914 9/16” M14X1.5
A50610812 1/2” M12X1.5 A88611112 11/16” M12X1.5
A50610814 1/2” M14X1.5 A88611114 11/16” M14X1.5
A50610912 9/16” M12X1.5 A88611116 11/16” M16X1.5
A50610914 9/16” M14X1.5 A88611118 11/16” M18X1.5
A50610916 9/16” M16X1.5 A88611314 13/16” M14X1.5
A50610918 9/16” M18X1.5 A88611316 13/16” M16X1.5
A50611214 3/4” M14X1.5 A88611318 13/16” M18X1.5
A50611216 3/4” M16X1.5 A88611322 13/16” M22X1.5
A50611218 3/4” M18X1.5 A88611618 1” M18X1.5
A50611220 3/4” M20X1.5 A88611622 1” M22X1.5
A50611222 3/4” M22X1.5 A88611627 1” M27X2.0
A50611418 7/8” M18X1.5 A88611922 1.3/16” M22X1.5
A50611420 7/8” M20X1.5 A88611927 1.3/16” M27X2.0
A50611422 7/8” M22X1.5 A88611933 1.3/16” M33X2.0
A50611720 1.1/16” M20X1.5 A88612327 1.7/16” M27X2.0
A50611722 1.1/16” M22X1.5 A88612333 1.7/16” M33X2.0
A50611724 1.1/16” M24X1.5 A88612342 1.7/16” M42X2.0
A50611727 1.1/16” M27X2.0 A88612733 1.11/16” M33X2.0
A50611730 1.1/16” M30X2.0 A88612742 1.11/16” M42X2.0
A50612126 1.5/16” M26X1.5 A88612748 1.11/16” M48X2.0
A50612127 1.5/16” M27X2.0 A88613248 2” M48X2.0
A50612133 1.5/16” M33X2.0
A50612642 1.5/8” M42X2.0
A50613048 1.7/8” M48X2.0

Return to Start of Section C4

Return to Main Index

METRIC FEMALE HIGH PRESSURE METRIC ADJUSTABLE X JIC 90
SOCKET ELBOW

AB B

Part No Thread A Thread B A Thread A Thread B
(METRIC PORT (METRIC PORT
A75751010 FEMALE) FEMALE) Part No (METRIC PORT Adj) (JIC)
A75751414 M10X1.0 M10X1.0
A75751616 M14X1.5 M14X1.5 B83501007 M10X1.0 7/16”
A75752222 M16X1.5 M16X1.5 B83501008
A75752727 M22X1.5 M22X1.5 B83501207 M10X1.0 1/2”
A75753333 M27X2.0 M27X2.0 B83501208
A75754242 M33X2.0 M33X2.0 B83501408 M12X1.5 7/16”
A75754848 M42X2.0 M42X2.0 B83501409
M48X2.0 M48X2.0 B83501609 M12X1.5 1/2”
B83501612
B83501812 M14X1.5 1/2”
B83501814
B83502014 M14X1.5 9/16”
B83502214
B83502217 M16X1.5 9/16”
B83502717
B83502721 M16X1.5 3/4”
B83503321
B83504226 M18X1.5 3/4”
B83504830
M18X1.5 7/8”

M20X1.5 7/8”

M22X1.5 7/8”

M22X1.5 1.1/16”

M27X2.0 1.1/16”

M27X2.0 1.5/16”

M33X2.0 1.5/16”

M42X2.0 1.5/8”

M48X2.0 1.7/8”

Return to Start of Section C5

Return to Main Index

METRIC ALLEN KEY CAPTIVE SEAL
PLUG

A

Part No Thread A
(METRIC PORT)
P-VSM10X1.0-WD M10X1.0
P-VSM12X1.5-WD M12X1.5
P-VSM14X1.5-WD M14X1.5
P-VSM16X1.5-WD M16X1.5
P-VSM18X1.5-WD M18X1.5
P-VSM20X1.5-WD M20X1.5
P-VSM22X1.5-WD M22X1.5
P-VSM26X1.5-WD M26X1.5
P-VSM27X2.0-WD M27X2.0
P-VSM33X2.0-WD M33X2.0
P-VSM42X2.0-WD M42X2.0
P-VSM48X2.0-WD M48X2.0

Return to Start of Section C6

Return to Main Index

HIGH QUALITY PRODUCTS BLACK / GREYSCALE VERSIONF

F FLUIDEXCELFLEitNtiCnEgsIN SERVICE

If necessary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:

Spot:

SECTION D - TWO PIECE SWAGEBlack - Pantone Black
Grey - Cool Grey 10

HOSE FITTING VISUALCMYK: INRDGB:EX
Grey
Black

C: 0 C: 0 Red Black

M: 0 M: 0 R: 75 R: 0

Y: 0 Y: 0 G: 75 G: 0

K: 70 K: 100 B: 75 B: 0

BSPP HOSE TAIL BSPT HOSE TAIL BSPPFS HOSE TAIL D5
(A0210...) D4 (A0222...) D4 (A0217...)

BSPPFS 45° SWEPT HOSE TAIL BSPPFS 90° SWEPT HOSE TAIL

(J0217...) D5 (G0217...) D5

NPT HOSE TAIL JIC HOSE TAIL JICFSV HOSE TAIL D6
(A0234...) D6 (A0250...) D6 (A0253...)

JICFSV 45° SWEPT HOSE TAIL JICFSV 90° SWEPT HOSE TAIL

(J0253...) D7 (G0253...) D7

ORFS HOSE TAIL ORFSFS HOSE TAIL ORFSFS 45° SWEPT HOSE
(A0288...) D8 (A0289...)
D8 TAIL (J0289...) D8

PH: 0800 FITTINGS 24 HOURS. D1

Return to Start of Section Return to Main Index

HIGH QUALITY PRODUCTS BLACK / GREYSCALE VERSIONF

F FLUIDEXCELFLEitNtiCnEgsIN SERVICE

If necessary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:

Spot:

SECTION D - TWO PIECE SWAGEBlack - Pantone Black
Grey - Cool Grey 10

HOSE FITTING VISUALCMYK: INRDGB:EX
Grey
Black

C: 0 C: 0 Red Black

M: 0 M: 0 R: 75 R: 0

Y: 0 Y: 0 G: 75 G: 0

K: 70 K: 100 B: 75 B: 0

ORFSFS 90° SWEPT HOSE TAIL CODE 61 HOSE TAIL CODE 61 45° SWEPT HOSE TAIL

(G0289...) D8 (A0238...) D9 (J0238...) D9

CODE 61 90° SWEPT HOSE TAIL METRIC STAND PIPE HOSE METRIC STAND PIPE 45°

(G0238...) D9 TAIL (A0279...) D10 SWEPT HOSE TAIL (J0279...) D10

METRIC STAND PIPE 90° METRIC LIGHT HOSE TAIL METRIC LIGHT FS HOSE TAIL
SWEPT HOSE TAIL (G0279...) D10 (A0265...) D11 (A0267...)
D11

METRIC LIGHT FS 45° SWEPT METRIC LIGHT FS 90° SWEPT METRIC HEAVY HOSE TAIL

HOSE TAIL (J0267...) D11 HOSE TAIL (G0267...) D11 (A0268...) D12

METRIC HEAVY FS HOSE TAIL METRIC HEAVY FS 45° SWEPT METRIC HEAVY FS 90° SWEPT

(A0270...) D12 HOSE TAIL (J0270...) D12 HOSE TAIL (G0270...) D12

PH: 0800 FITTINGS 24 HOURS. D2

Return to Start of Section Return to Main Index

HIGH QUALITY PRODUCTS BLACK / GREYSCALE VERSIONF

F FLUIDEXCELFLEitNtiCnEgsIN SERVICE

If necessary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:

Spot:

SECTION D - TWO PIECE SWAGEBlack - Pantone Black
Grey - Cool Grey 10

HOSE FITTING VISUALCMYK: INRDGB:EX
Grey
Black

C: 0 C: 0 Red Black

M: 0 M: 0 R: 75 R: 0

Y: 0 Y: 0 G: 75 G: 0

K: 70 K: 100 B: 75 B: 0

CODE 61 FLANGE CODE 62 FLANGE ONE WIRE NON SKIVE
(FL61S38...) D13 (FL62S39...)
D13 FERRULE (SN1..) D14

ONE WIRE SKIVE FERRULE TWO WIRE NON SKIVE TWO WIRE SKIVE FERRULE
(SS1..) D14 FERRULE (SN2...)
D14 (SS2...) D14

R7 NON SKIVE FERRULE

(SN7...) D14

PH: 0800 FITTINGS 24 HOURS. D3

Return to Start of Section Return to Main Index

BSPP MALE X SWAGE TAIL BSPT MALE X SWAGE TAIL

AB AB

Part No THREAD A HOSE TAIL B Part No THREAD A HOSE TAIL B
(BSPP) (“) (BSPT) (“)
A02100302-2 1/8” 3/16” A02220302-2 1/8” 3/16”
A02100304-2 1/4” 3/16” A02220304-2 1/4” 3/16”
A02100402-2 1/8” 1/4” A02220402-2 1/8” 1/4”
A02100404-2 1/4” 1/4” A02220404-2 1/4” 1/4”
A02100406-2 3/8” 1/4” A02220406-2 3/8” 1/4”
A02100504-2 1/4” 5/16” A02220504-2 1/4” 5/16”
A02100506-2 3/8” 5/16” A02220506-2 3/8” 5/16”
A02100604-2 1/4” 3/8” A02220606-2 3/8” 3/8”
A02100606-2 3/8” 3/8” A02220608-2 1/2” 3/8”
A02100608-2 1/2” 3/8” A02220806-2 3/8” 1/2”
A02100806-2 3/8” 1/2” A02220808-2 1/2” 1/2”
A02100808-2 1/2” 1/2” A02221012-2 3/4” 5/8”
A02100812-2 3/4” 1/2” A02221212-2 3/4” 3/4”
A02101012-2 3/4” 5/8” A02221216-2 1” 3/4”
A02101212-2 3/4” 3/4” A02221616-2 1” 1”
A02101216-2 1” 3/4” A02221620-2 1.1/4” 1”
A02101616-2 1” 1” A02222020-2 1.1/4” 1.1/4”
A02101620-2 1.1/4” 1” A02222424-2 1.1/2” 1.1/2”
A02102020-2 1.1/4” 1.1/4” A02223232-2 2” 2”
A02102424-2 1.1/2” 1.1/2”
A02103232-2 2” 2”

PH: 0800 FITTINGS 24 HOURS. D4

Return to Start of Section Return to Main Index

BSPP FEMALE SWIVEL X SWAGE TAIL BSPP FEMALE SWIVEL X 90 SWEPT
SWAGE TAIL
AB
A

Part No THREAD A HOSE TAIL B B

(BSPPFS) (“) THREAD A
(BSPPFS)
A02170302-2 1/8” 3/16” Part No 1/8” HOSE TAIL B
1/4” (“)
A02170304-2 1/4” 3/16” G02170302-2 1/4” 3/16”
G02170304-2 1/4” 3/16”
A02170402-2 1/8” 1/4” G02170404-2 3/8” 1/4”
G02170504-2 3/8” 5/16”
A02170404-2 1/4” 1/4” G02170506-2 1/2” 5/16”
G02170606-2 3/4” 3/8”
A02170406-2 3/8” 1/4” G02170808-2 3/4” 1/2”
G02171012-2 1” 5/8”
A02170504-2 1/4” 5/16” G02171212-2 1.1/4” 3/4”
G02171616-2 1.1/2” 1”
A02170506-2 3/8” 5/16” G02172020-2 2” 1.1/4”
G02172424-2 1.1/2”
A02170604-2 1/4” 3/8” G02173232-2 2”

A02170606-2 3/8” 3/8”

A02170608-2 1/2” 3/8”

A02170806-2 3/8” 1/2”

A02170808-2 1/2” 1/2”

A02170812-2 3/4” 1/2”

A02171012-2 3/4” 5/8”

A02171212-2 3/4” 3/4”

A02171216-2 1” 3/4”

A02171616-2 1” 1”

A02171620-2 1.1/4” 1”

A02172020-2 1.1/4” 1.1/4”

A02172024-2 1.1/2” 1.1/4”

A02172424-2 1.1/2” 1.1/2”

A02173232-2 2” 2”

BSPP FEMALE SWIVEL X 45 SWEPT
SWAGE TAIL

A

B

Part No THREAD A HOSE TAIL B D5
(BSPPFS) (“)
J02170302-2 1/8” 3/16” Return to Main Index
J02170304-2 1/4” 3/16”
J02170404-2 1/4” 1/4”
J02170504-2 1/4” 5/16”
J02170506-2 3/8” 5/16”
J02170606-2 3/8” 3/8”
J02170808-2 1/2” 1/2”
J02171012-2 3/4” 5/8”
J02171212-2 3/4” 3/4”
J02171616-2 1” 1”
J02172020-2 1.1/4” 1.1/4”
J02172424-2 1.1/2” 1.1/2”
J02173232-2 2” 2”

PH: 0800 FITTINGS 24 HOURS.

Return to Start of Section

NPT MALE X SWAGE TAIL JIC FEMALE SWIVEL X SWAGE TAIL

A BA B

Part No THREAD A HOSE TAIL B

(NPT) (“) Part No THREAD A HOSE TAIL B
(JICFS) (“)
A02340302-2 1/8” 3/16” A02530307-2 7/16” 3/16”
A02530308-2 1/2” 3/16”
A02340402-2 1/8” 1/4” A02530407-2 7/16” 1/4”
A02530408-2 1/2” 1/4”
A02340404-2 1/4” 1/4” A02530409-2 9/16” 1/4”
A02530509-2 9/16” 5/16”
A02340406-2 3/8” 1/4” A02530609-2 9/16” 3/8”
A02530612-2 3/4” 3/8”
A02340504-2 1/4” 5/16” A02530614-2 7/8” 3/8”
A02530812-2 3/4” 1/2”
A02340606-2 3/8” 3/8” A02530814-2 7/8” 1/2”
A02530817-2 1.1/16” 1/2”
A02340608-2 1/2” 3/8” A02531014-2 7/8” 5/8”
A02531017-2 1.1/16” 5/8”
A02340806-2 3/8” 1/2” A02531217-2 1.1/16” 3/4”
A02531221-2 1.5/16” 3/4”
A02340808-2 1/2” 1/2” A02531621-2 1.5/16” 1”
A02531626-2 1.5/8” 1”
A02341012-2 3/4” 5/8” A02532026-2 1.5/8” 1.1/4”
A02532030-2 1.7/8” 1.1/4”
A02341212-2 3/4” 3/4” A02532430-2 1.7/8” 1.1/2”
A02533240-2 2.1/2” 2”
A02341216-2 1” 3/4”

A02341616-2 1” 1”

A02341620-2 1.1/4” 1”

A02342020-2 1.1/4” 1.1/4”

A02342424-2 1.1/2” 1.1/2”

A02343232-2 2” 2”

JIC MALE X SWAGE TAIL

AB

Part No THREAD A HOSE TAIL B D6
(JIC) (“)
A02500307-2 7/16” 3/16” Return to Main Index
A02500308-2 1/2” 3/16”
A02500407-2 7/16” 1/4”
A02500408-2 1/2” 1/4”
A02500409-2 9/16” 1/4”
A02500509-2 9/16” 5/16”
A02500609-2 9/16” 3/8”
A02500612-2 3/4” 3/8”
A02500614-2 7/8” 3/8”
A02500812-2 3/4” 1/2”
A02500814-2 7/8” 1/2”
A02500817-2 1.1/16” 1/2”
A02501014-2 7/8” 5/8”
A02501017-2 1.1/16” 5/8”
A02501217-2 1.1/16” 3/4”
A02501221-2 1.5/16” 3/4”
A02501621-2 1.5/16” 1”
A02502026-2 1.5/8” 1.1/4”
A02502430-2 1.7/8” 1.1/2”
A02503240-2 2.1/2” 2”

PH: 0800 FITTINGS 24 HOURS.

Return to Start of Section

JIC FEMALE SWIVEL X 45 SWEPT JIC FEMALE SWIVEL X 90 SWEPT
SWAGE TAIL SWAGE TAIL

A A

B

Part No THREAD A HOSE TAIL B B
(JICFS) (“)
J02530307-2 7/16” 3/16” Part No THREAD A HOSE TAIL B
J02530308-2 1/2” 3/16” (JICFS) (“)
J02530407-2 7/16” 1/4” G02530307-2 7/16” 3/16”
J02530408-2 1/2” 1/4” G02530308-2 1/2” 3/16”
J02530409-2 9/16” 1/4” G02530407-2 7/16” 1/4”
J02530509-2 9/16” 5/16” G02530408-2 1/2” 1/4”
J02530609-2 9/16” 3/8” G02530409-2 9/16” 1/4”
J02530612-2 3/4” 3/8” G02530509-2 9/16” 5/16”
J02530614-2 7/8” 3/8” G02530609-2 9/16” 3/8”
J02530812-2 3/4” 1/2” G02530612-2 3/4” 3/8”
J02530814-2 7/8” 1/2” G02530614-2 7/8” 3/8”
J02530817-2 1.1/16” 1/2” G02530812-2 3/4” 1/2”
J02531014-2 7/8” 5/8” G02530814-2 7/8” 1/2”
J02531017-2 1.1/16” 5/8” G02530817-2 1.1/16” 1/2”
J02531217-2 1.1/16” 3/4” G02531014-2 7/8” 5/8”
J02531221-2 1.5/16” 3/4” G02531017-2 1.1/16” 5/8”
J02531621-2 1.5/16” 1” G02531217-2 1.1/16” 3/4”
J02531626-2 1.5/8” 1” G02531221-2 1.5/16” 3/4”
J02532026-2 1.5/8” 1.1/4” G02531621-2 1.5/16” 1”
J02532030-2 1.7/8” 1.1/4” G02531626-2 1.5/8” 1”
J02532430-2 1.7/8” 1.1/2” G02532026-2 1.5/8” 1.1/4”
J02533240-2 2.1/2” 2” G02532030-2 1.7/8” 1.1/4”
G02532430-2 1.7/8” 1.1/2”
G02533240-2 2.1/2” 2”

PH: 0800 FITTINGS 24 HOURS. D7

Return to Start of Section Return to Main Index

ORFS MALE X SWAGE TAIL ORFS FEMALE SWIVEL X 45 SWEPT
TAIL
AB
A

B

Part No THREAD A HOSE TAIL B Part No THREAD A HOSE TAIL B
(ORFS) (“) (ORFSFS) (“)
A02880409-2 9/16” 1/4” J02890409-2 9/16” 1/4”
A02880411-2 11/16” 1/4” J02890411-2 11/16” 1/4”
A02880511-2 11/16” 5/16” J02890511-2 11/16” 5/16”
A02880611-2 11/16” 3/8” J02890611-2 11/16” 3/8”
A02880613-2 13/16” 3/8” J02890613-2 13/16” 3/8”
A02880813-2 13/16” 1/2” J02890813-2 13/16” 1/2”
A02880816-2 1” 1/2” J02890816-2 1” 1/2”
A02880819-2 1.3/16” 1/2” J02890819-2 1.3/16” 1/2”
A02881016-2 1” 5/8” J02891016-2 1” 5/8”
A02881019-2 1.3/16” 5/8” J02891019-2 1.3/16” 5/8”
A02881219-2 1.3/16” 3/4” J02891219-2 1.3/16” 3/4”
A02881223-2 1.7/16” 3/4” J02891223-2 1.7/16” 3/4”
A02881623-2 1.7/16” 1” J02891623-2 1.7/16” 1”
A02882027-2 1.11/16” 1.1/4” J02892027-2 1.11/16” 1.1/4”
A02882432-2 2” 1.1/2” J02892432-2 2” 1.1/2”

ORFS FEMALE SWIVEL X SWAGE TAIL ORFS FEMALE SWIVEL X 90 SWEPT
TAIL
AB
A

Part No THREAD A HOSE TAIL B B
(ORFSFS) (“)
A02890409-2 9/16” 1/4” Part No THREAD A HOSE TAIL B
A02890411-2 11/16” 1/4” (ORFSFS) (“)
A02890511-2 11/16” 5/16” G02890409-2 9/16” 1/4”
A02890611-2 11/16” 3/8” G02890411-2 11/16” 1/4”
A02890613-2 13/16” 3/8” G02890511-2 11/16” 5/16”
A02890813-2 13/16” 1/2” G02890611-2 11/16” 3/8”
A02890816-2 1” 1/2” G02890613-2 13/16” 3/8”
A02890819-2 1.3/16” 1/2” G02890813-2 13/16” 1/2”
A02891016-2 1” 5/8” G02890816-2 1” 1/2”
A02891019-2 1.3/16” 5/8” G02890819-2 1.3/16” 1/2”
A02891219-2 1.3/16” 3/4” G02891016-2 1” 5/8”
A02891223-2 1.7/16” 3/4” G02891019-2 1.3/16” 5/8”
A02891623-2 1.7/16” 1” G02891219-2 1.3/16” 3/4”
A02892027-2 1.11/16” 1.1/4” G02891223-2 1.7/16” 3/4”
A02892432-2 2” 1.1/2” G02891623-2 1.7/16” 1”
G02892027-2 1.11/16” 1.1/4”
G02892432-2 2” 1.1/2”

D8

PH: 0800 FITTINGS 24 HOURS.

Return to Start of Section Return to Main Index

CODE 61 X SWAGE TAIL CODE 61 X 90 SWEPT TAIL

AB A

Part No END A HOSE TAIL B Part No B HOSE TAIL B
(CODE 61”) (“) (“)
A02380808-2 1/2” 1/2” G02380808-2 END A 1/2”
A02380812-2 3/4” 1/2” G02380812-2 (CODE 61”) 1/2”
A02381012-2 3/4” 5/8” G02381012-2 1/2” 5/8”
A02381212-2 3/4” 3/4” G02381212-2 3/4” 3/4”
A02381216-2 1” 3/4” G02381216-2 3/4” 3/4”
A02381616-2 1” 1” G02381616-2 3/4” 1”
A02381620-2 1.1/4” 1” G02381620-2 1” 1”
A02382020-2 1.1/4” 1.1/4” G02382020-2 1” 1.1/4”
A02382024-2 1.1/2” 1.1/4” G02382024-2 1.1/4” 1.1/4”
A02382424-2 1.1/2” 1.1/2” G02382424-2 1.1/4” 1.1/2”
A02382432-2 2” 1.1/2” G02382432-2 1.1/2” 1.1/2”
A02383232-2 2” 2” G02383232-2 1.1/2” 2”
2”
2”

CODE 61 X 45 SWEPT TAIL

A

B

Part No END A HOSE TAIL B
(CODE 61”) (“)
J02380808-2 1/2” 1/2”
J02380812-2 3/4” 1/2”
J02381012-2 3/4” 5/8”
J02381212-2 3/4” 3/4”
J02381216-2 1” 3/4”
J02381616-2 1” 1”
J02381620-2 1.1/4” 1”
J02382020-2 1.1/4” 1.1/4”
J02382024-2 1.1/2” 1.1/4”
J02382424-2 1.1/2” 1.1/2”
J02382432-2 2” 1.1/2”
J02383232-2 2” 2”

PH: 0800 FITTINGS 24 HOURS. D9

Return to Start of Section Return to Main Index

METRIC STAND PIPE X SWAGE TAIL METRIC STAND PIPE X 45 SWEPT TAIL

AB A

B

Part No CONNECTION A HOSE TAIL B Part No CONNECTION A HOSE TAIL B
(MM) (“) (MM) (“)
A02790306-2 6 3/16” J02790306-2 6 3/16”
A02790308-2 8 3/16” J02790308-2 8 3/16”
A02790406-2 6 1/4” J02790406-2 6 1/4”
A02790408-2 8 1/4” J02790510-2 10 5/16”
A02790410-2 10 1/4” J02790512-2 12 5/16”
A02790412-2 12 1/4” J02791018-2 18 5/8”
A02790510-2 10 5/16” J02791020-2 20 5/8”
A02790512-2 12 5/16” J02792438-2 38 1.1/2”
A02790610-2 10 3/8”
A02790612-2 12 3/8” METRIC STAND PIPE X 90 SWEPT TAIL
A02790614-2 14 3/8”
A02790615-2 15 3/8” A
A02790814-2 14 1/2”
A02790815-2 15 1/2” B
A02790816-2 16 1/2”
A02790818-2 18 1/2” Part No CONNECTION A HOSE TAIL B
A02791018-2 18 5/8” (MM) (“)
A02791020-2 20 5/8” G02790306-2 6 3/16”
A02791220-2 20 3/4” G02790308-2 8 3/16”
A02791222-2 22 3/4” G02790406-2 6 1/4”
A02791225-2 25 3/4” G02790510-2 10 5/16”
A02791625-2 25 1” G02790512-2 12 5/16”
A02791628-2 28 1” G02791018-2 18 5/8”
A02791630-2 30 1” G02791020-2 20 5/8”
A02792035-2 35 1.1/4” G02792438-2 38 1.1/2”
A02792038-2 38 1.1/4”
A02792438-2 38 1.1/2”
A02792442-2 42 1.1/2”

PH: 0800 FITTINGS 24 HOURS. D10

Return to Start of Section Return to Main Index

METRIC LIGHT (L) MALE X SWAGE TAIL METRIC LIGHT (L) FEMALE SWIVEL
X 45 SWEPT TAIL

A
AB

B

Part No THREAD A HOSE TAIL B Part No THREAD A HOSE TAIL B
(METRIC L MALE) (“) (METRIC L FS) (“)
A02650414-2 M14X1.5 (8L) 1/4” J02670414-2 M14X1.5 (8L) 1/4”
A02650416-2 M16X1.5 (10L) 1/4” J02670416-2 M16X1.5 (10L) 1/4”
A02650418-2 M18X1.5 (12L) 1/4” J02670418-2 M18X1.5 (12L) 1/4”
A02650618-2 M18X1.5 (12L) 3/8” J02670618-2 M18X1.5 (12L) 3/8”
A02650622-2 M22X1.5 (15L) 3/8” J02670622-2 M22X1.5 (15L) 3/8”
A02650822-2 M22X1.5 (15L) 1/2” J02670822-2 M22X1.5 (15L) 1/2”
A02650826-2 M26X1.5 (18L) 1/2” J02670826-2 M26X1.5 (18L) 1/2”
A02651230-2 M30X2.0 (22L) 3/4” J02671230-2 M30X2.0 (22L) 3/4”
A02651636-2 M36X2.0 (28L) 1” J02671636-2 M36X2.0 (28L) 1”
A02652045-2 M45X2.0 (35L) 1.1/4” J02672045-2 M45X2.0 (35L) 1.1/4”
A02652452-2 M52X2.0 (42L) 1.1/2” J02672452-2 M52X2.0 (42L) 1.1/2”

METRIC LIGHT (L) FEMALE SWIVEL METRIC LIGHT (L) FEMALE SWIVEL X
X SWAGE TAIL 90 SWEPT TAIL

AB A

B

Part No THREAD A HOSE TAIL B Part No THREAD A HOSE TAIL B
(METRIC L FS) (“) (METRIC L FS) (“)
A02670414-2 M14X1.5 (8L) 1/4” G02670414-2 M14X1.5 (8L) 1/4”
A02670416-2 M16X1.5 (10L) 1/4” G02670416-2 M16X1.5 (10L) 1/4”
A02670418-2 M18X1.5 (12L) 1/4” G02670418-2 M18X1.5 (12L) 1/4”
A02670618-2 M18X1.5 (12L) 3/8” G02670618-2 M18X1.5 (12L) 3/8”
A02670622-2 M22X1.5 (15L) 3/8” G02670622-2 M22X1.5 (15L) 3/8”
A02670822-2 M22X1.5 (15L) 1/2” G02670822-2 M22X1.5 (15L) 1/2”
A02670826-2 M26X1.5 (18L) 1/2” G02670826-2 M26X1.5 (18L) 1/2”
A02671026-2 M26X1.5 (18L) 5/8” G02671026-2 M26X1.5 (18L) 5/8”
A02671230-2 M30X2.0 (22L) 3/4” G02671230-2 M30X2.0 (22L) 3/4”
A02671636-2 M36X2.0 (28L) 1” G02671636-2 M36X2.0 (28L) 1”
A02672045-2 M45X2.0 (35L) 1.1/4” G02672045-2 M45X2.0 (35L) 1.1/4”
A02672452-2 M52X2.0 (42L) 1.1/2” G02672452-2 M52X2.0 (42L) 1.1/2”

PH: 0800 FITTINGS 24 HOURS. D11

Return to Start of Section Return to Main Index

METRIC HEAVY (S) MALE X METRIC HEAVY (S) FEMALE
SWAGE TAIL SWIVEL X 45 SWEPT TAIL

AB A

B

Part No THREAD A HOSE TAIL B Part No THREAD A HOSE TAIL B
(METRIC S MALE) (“)
A02680414-2 M14X1.5 (6S) 1/4” J02700414-2 (METRIC S FS) (“)
A02680416-2 M16X1.5 (8S) 1/4” J02700416-2
A02680418-2 M18X1.5 (10S) 1/4” J02700418-2 M14X1.5 (6S) 1/4”
A02680420-2 M20X1.5 (12S) 1/4” J02700420-2
A02680620-2 M20X1.5 (12S) 3/8” J02700620-2 M16X1.5 (8S) 1/4”
A02680622-2 M22X1.5 (14S) 3/8” J02700622-2
A02680822-2 M22X1.5 (14S) 1/2” J02700822-2 M18X1.5 (10S) 1/4”
A02680824-2 M24X1.5 (16S) 1/2” J02700824-2
A02681230-2 M30X2.0 (20S) 3/4” J02701230-2 M20X1.5 (12S) 1/4”
A02681236-2 M36X2.0 (25S) 3/4” J02701236-2
A02681636-2 M36X2.0 (25S) 1” J02701636-2 M20X1.5 (12S) 3/8”
A02681642-2 M42X2.0 (30S) 1” J02701642-2
A02682052-2 M52X2.0 (38S) 1.1/4” J02702052-2 M22X1.5 (14S) 3/8”

M22X1.5 (14S) 1/2”

M24X1.5 (16S) 1/2”

M30X2.0 (20S) 3/4”

M36X2.0 (25S) 3/4”

M36X2.0 (25S) 1”

M42X2.0 (30S) 1”

M52X2.0 (38S) 1.1/4”

METRIC HEAVY (S) FEMALE METRIC HEAVY (S) FEMALE SWIVEL X
SWIVEL X SWAGE TAIL 90 SWEPT TAIL

AB A

B

Part No THREAD A HOSE TAIL B Part No THREAD A HOSE TAIL B

A02700414-2 (METRIC S FS) (“) G02700414-2 (METRIC S FS) (“)
A02700416-2 G02700416-2
A02700418-2 M14X1.5 (6S) 1/4” G02700418-2 M14X1.5 (6S) 1/4”
A02700420-2 G02700420-2
A02700620-2 M16X1.5 (8S) 1/4” G02700620-2 M16X1.5 (8S) 1/4”
A02700622-2 G02700622-2
A02700822-2 M18X1.5 (10S) 1/4” G02700822-2 M18X1.5 (10S) 1/4”
A02700824-2 G02700824-2
A02701030-2 M20X1.5 (12S) 1/4” G02701030-2 M20X1.5 (12S) 1/4”
A02701230-2 G02701230-2
A02701236-2 M20X1.5 (12S) 3/8” G02701236-2 M20X1.5 (12S) 3/8”
A02701636-2 G02701636-2
A02701642-2 M22X1.5 (14S) 3/8” G02701642-2 M22X1.5 (14S) 3/8”
A02702052-2 G02702052-2
M22X1.5 (14S) 1/2” M22X1.5 (14S) 1/2”

M24X1.5 (16S) 1/2” M24X1.5 (16S) 1/2”

M30X2.0 (20S) 5/8” M30X2.0 (20S) 5/8”

M30X2.0 (20S) 3/4” M30X2.1 (20S) 3/4”

M36X2.0 (25S) 3/4” M36X2.0 (25S) 3/4”

M36X2.0 (25S) 1” M36X2.0 (25S) 1”

M42X2.0 (30S) 1” M42X2.0 (30S) 1”

M52X2.0 (38S) 1.1/4” M52X2.0 (38S) 1.1/4”

D12

PH: 0800 FITTINGS 24 HOURS.

Return to Start of Section Return to Main Index

CODE 61 SPLIT FLANGE HALF CODE 62 SPLIT FLANGE HALF

Part No CODE 61 FLANGE SIZE Part No CODE 62 FLANGE SIZE
(“) (“)
FL61S3808 1/2” FL62S3908 1/2”
FL61S3812 3/4” FL62S3912 3/4”
FL61S3816 1” FL62S3916 1”
FL61S3820 1.1/4” FL62S3920 1.1/4”
FL61S3824 1.1/2” FL62S3924 1.1/2”
FL61S3832 2” FL62S3932 2”

NOTE: Sold individually, two pieces required per set.

PH: 0800 FITTINGS 24 HOURS. D13

Return to Start of Section Return to Main Index

SAE 100R1AT NON SKIVE FERRULE SAE 100R2AT NON SKIVE FERRULE

Part No HOSE SIZE Part No HOSE SIZE
(“) (“)
SN103 3/16” SN203 3/16”
SN104 1/4” SN204 1/4”
SN105 5/16” SN205 5/16”
SN106 3/8” SN206 3/8”
SN108 1/2” SN208 1/2”
SN110 5/8” SN210 5/8”
SN112 3/4” SN212 3/4”
SN116 1” SN216 1”
SN120 1.1/4” SN220 1.1/4”
SN124 1.1/2” SN224 1.1/2”

SAE 100R1AT SKIVE FERRULE SAE 100R2AT SKIVE FERRULE

Part No HOSE SIZE Part No HOSE SIZE
SS132 (“) SS232 (“)
2” 2”

SAE 100R7 NON SKIVE FERRULE

Part No HOSE SIZE
(“)
SN703 3/16”
SN704 1/4”
SN705 5/16”
SN706 3/8”
SN708 1/2”
SN710 5/8”
SN712 3/4”
SN716 1”

PH: 0800 FITTINGS 24 HOURS. D14

Return to Start of Section Return to Main Index

HIGH QUALITY PRODUCTS BLACK / GREYSCALE VERSIONF

F FLUIDEXCELFLEitNtiCnEgsIN SERVICE

If necessary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:
Spot:

SECTION E - HYDRAULIC TUBEBlack - Pantone Black
Grey - Cool Grey 10

CMYK: Black RGB: Black
Grey C: 0 Red R: 0
C: 0 M: 0 R: 75 G: 0
M: 0 Y: 0 G: 75 B: 0
Y: 0 K: 100 B: 75
K: 70

Fluid Fittings Limited stock seamless steel feed line / heat exchanger tube in the
following materials:

• Plain carbon steel.
• Plated carbon steel.
• Grade 316 stainless steel.

The tube conforms to the following specifications:

• Imperial carbon steel tube to ASTM A179.
• Metric carbon steel tube to DIN 2391/C or E235+N.
• Metric and Imperial stainless steel tube to ASTM A269.

The working pressures quoted are static pressures and are guidelines only.

It is the responsibility of the system designer to ensure the tube selected meets the
appropriate standard for the application.

Material test certificates are avaialble upon request.

PH: 0800 FITTINGS 24 HOURS. E1

Return to Start of Section Return to Main Index

METRIC STEEL HYDRAULIC TUBE

Part No Tube OD Wall Thickness Weight Working Pressure
(mm) (mm) (Kg/m) (Bar)
MSHT6-1.0mm 6 1.0 0.123 389
MSHT8-1.5mm 8 1.5 0.240 431
MSHT10-1.5mm 10 1.5 0.314 373
MSHT12-1.5mm 12 1.5 0.388 353
MSHT14-2.0mm 14 2.0 0.592 403
MSHT15-1.5mm 15 1.5 0.499 282
MSHT16-2.0mm 16 2.0 0.690 353
MSHT18-1.5mm 18 1.5 0.610 235
MSHT20-2.5mm 20 2.5 1.079 353
MSHT22-2.0mm 22 2.0 0.986 256
MSHT25-3.0mm 25 3.0 1.628 338
MSHT28-2.0mm 28 2.0 1.282 201
MSHT30-3.0mm 30 3.0 1.997 282
MSHT30-4.0mm 30 4.0 2.565 376
MSHT35-2.5mm 35 2.5 2.003 201
MSHT38-5.0mm 38 5.0 3.350 371
MSHT42-3.0mm 42 3.0 2.885 201

METRIC PLATED STEEL HYDRAULIC TUBE

Part No Tube OD Wall Thickness Weight Working Pressure
(mm) (mm) (Kg/m) (Bar)
MSHTP6-1.0mm 6 1.0 0.123 389
MSHTP8-1.5mm 8 1.5 0.240 431
MSHTP10-1.5mm 10 1.5 0.314 373
MSHTP12-1.5mm 12 1.5 0.388 353
MSHTP12-2.0mm 12 2.0 0.493 409
MSHTP14-2.0mm 14 2.0 0.592 403
MSHTP15-1.5mm 15 1.5 0.499 282
MSHTP16-2.0mm 16 2.0 0.690 353
MSHTP16-2.5mm 16 2.5 0.832 386
MSHTP18-1.5mm 18 1.5 0.610 235
MSHTP20-2.5mm 20 2.5 1.079 353
MSHTP20-3.5mm 20 3.5 1.424 426
MSHTP22-2.0mm 22 2.0 0.986 256
MSHTP25-3.0mm 25 3.0 1.628 338
MSHTP25-4.0mm 25 4.0 2.072 394
MSHTP28-2.0mm 28 2.0 1.282 201
MSHTP30-4.0mm 30 4.0 2.565 376
MSHTP35-2.5mm 35 2.5 2.003 201
MSHTP38-5.0mm 38 5.0 3.350 371
MSHTP42-3.0mm 42 3.0 2.885 201

E2

PH: 0800 FITTINGS 24 HOURS.

Return to Start of Section Return to Main Index

IMPERIAL STEEL HYDRAULIC TUBE

Part No Tube OD Wall Thickness Weight Working Pressure
(”) (GAUGE/mm) (Kg/m) (Bar)
ISHT1/4-20G 1/4” 20G(0.91) 0.123 310
ISHT3/8-20G 3/8” 20G(0.91) 0.193 207
ISHT3/8-18G 3/8” 18G(1.22) 0.250 278
ISHT1/2-16G 1/2” 16G(1.63) 0.445 278
ISHT5/8-16G 5/8” 16G(1.63) 0.573 222
ISHT3/4-16G 3/4” 16G(1.63) 0.700 185
ISHT3/4-14G 3/4” 14G(2.03) 0.852 231
ISHT7/8-14G 7/8” 14G(2.03) 1.011 198
ISHT1-14G 1” 14G(2.03) 1.170 173
ISHT1-12G 1” 12G(2.64) 1.482 225
ISHT1-10G 1” 10G(3.25) 1.775 277
ISHT1.1/4-14G 1.1/4” 14G(2.03) 1.488 139
ISHT1.1/4-12G 1.1/4” 12G(2.64) 1.895 180
ISHT1.1/4-10G 1.1/4” 10G(3.25) 2.285 222
ISHT1.1/2-14G 1.1/2” 14G(2.03) 1.806 115
ISHT1.1/2-10G 1.1/2” 10G(3.25) 2.793 185
ISHT2-10G 2” 10G(3.25) 3.811 139

IMPERIAL PLATED STEEL HYDRAULIC TUBE

Part No Tube OD Wall Thickness Weight Working Pressure
(”) (GAUGE/mm) (Kg/m) (Bar)
ISHTP1/4-20G 1/4” 20G(0.91) 0.123 310
ISHTP3/8-18G 3/8” 18G(1.22) 0.250 278
ISHTP3/8-16G 3/8” 16G(1.63) 0.317 385
ISHTP1/2-16G 1/2” 16G(1.63) 0.445 278
ISHTP5/8-16G 5/8” 16G(1.63) 0.573 222
ISHTP3/4-14G 3/4” 14G(2.03) 0.852 231
ISHTP7/8-14G 7/8” 14G(2.03) 1.011 198
ISHTP1-14G 1” 14G(2.03) 1.170 173
ISHTP1-12G 1” 12G(2.64) 1.482 225
ISHTP1.1/4-14G 1.1/4” 14G(2.03) 1.488 139
ISHTP1.1/4-10G 1.1/4” 10G(3.25) 2.284 222
ISHTP1.1/2-10G 1.1/2” 10G(3.25) 2.793 185

PH: 0800 FITTINGS 24 HOURS. E3

Return to Start of Section Return to Main Index

METRIC STAINLESS STEEL HYDRAULIC TUBE

Part No Tube OD Wall Thickness Weight Working Pressure
(mm) (mm) (Kg/m) (Bar)
MSST6-1.0mm 6 1.0 0.123 406
MSST8-1.5mm 8 1.5 0.240 449
MSST10-1.5mm 10 1.5 0.314 389
MSST12-1.5mm 12 1.5 0.389 368
MSST14-2.0mm 14 2.0 0.601 420
MSST15-1.5mm 15 1.5 0.499 294
MSST16-2.0mm 16 2.0 0.690 368
MSST18-1.5mm 18 1.5 0.610 245
MSST18-2.0mm 18 2.0 0.801 326
MSST20-2.5mm 20 2.5 1.079 368
MSST22-2.0mm 22 2.0 0.986 267
MSST25-3.0mm 25 3.0 1.628 352
MSST28-2.0mm 28 2.0 1.282 210
MSST30-3.0mm 30 3.0 1.997 294
MSST35-2.5mm 35 2.5 2.003 210
MSST38-4.0mm 38 4.0 3.350 387
MSST42-3.0mm 42 3.0 2.885 210

IMPERIAL STAINLESS STEEL HYDRAULIC TUBE

Part No Tube OD Wall Thickness Weight Working Pressure
(”) (GAUGE/mm) (Kg/m) (Bar)
ISST1/8-22G 1/8” 22G(0.71) 0.043 581
ISST3/16-22G 3/16” 22G(0.71) 0.071 388
ISST1/4-20G 1/4” 20G(0.91) 0.122 373
ISST3/8-20G 3/8” 20G(0.91) 0.190 248
ISST3/8-18G 3/8” 18G(1.22) 0.250 333
ISST1/2-18G 1/2” 18G(1.22) 0.345 250
ISST1/2-16G 1/2” 16G(1.63) 0.445 334
ISST5/8-16G 5/8 16G(1.63) 0.573 267
ISST3/4-16G 3/4” 16G(1.63) 0.700 222
ISST3/4-14G 3/4” 14G(2.03) 0.852 277
ISST1-14G 1” 14G(2.03) 1.170 208
ISST1-12G 1” 12G(2.64) 1.482 270
ISST1.1/4-12G 1.1/4” 12G(2.64) 1.895 216
ISST1.1/2-10G 1.1/2” 10G(3.25) 2.793 222
ISST2-10G 2” 10G(3.25) 3.811 166

PH: 0800 FITTINGS 24 HOURS. E4

Return to Start of Section Return to Main Index

HIGH QUALITY PRODUCTS FBLACK / GREYSCALE VERSION

F FLUIDEXCELFLEitNtiCnEgsIN SERVICE

If necessary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:
Spot:

SECTION F - HONED BORE CYLINDER TUBEBlack - Pantone Black
Grey - Cool Grey 10

CMYK: Black RGB: Black
Grey C: 0 Red R: 0
C: 0 M: 0 R: 75 G: 0
M: 0 Y: 0 G: 75 B: 0
Y: 0 K: 100 B: 75
K: 70

Fluid Fittings Limited stocks honed bore tube that is generally used for the
manufacture of cylinders for hydraulic and pneumatic rams.

The tube is stocked as random lengths of typically 5.5 metres to 6.5 metres.
Occasionally we receive stock up to 8 metres long so please do not hesitate to
contact our sales staff if you need longer lengths.

Fluid Fittings Limited offers a same day cut and despatch service.

The honed bore tube part numbering system is described below:

HBT+++.++x+++.++

Honed bore tube Internal diameter (mm) External Diameter (mm)

For example a 100mm inside diameter tube with a 10mm wall thickness would have
the part number HBT100.00X120.00

The typical mechanical properties for the steel are as follows:

• 520 MPa yield stress.
• 600 MPa tensile stress.

Note: some larger sizes are hot finished and are of lower strength.

Where strength is critical then a material test certificate can be supplied on request.

We are continually updating our size range, please contact our sales staff to discuss
availablily of sizes not listed.

PH: 0800 FITTINGS 24 HOURS. F1

Return to Start of Section Return to Main Index

HONED BORE CYLINDER TUBE

Part No Tube ID Tube ID Wall Thickness Wall Thickness Weight
(mm) (”) (Kg/m)
HBT025.00X032.00 25.00   (mm) (”) 2.460
HBT025.00X035.00 25.00   3.699
HBT025.40X038.10 25.40 1 3.50   4.972
HBT030.00X040.00 30.00   4.316
HBT031.75X044.45 31.75 1.1/4 5.00   5.966
HBT035.00X045.00 35.00 4.930
HBT035.00X050.00 35.00   6.35 1/4 7.860
HBT038.10X050.80 38.10 1.1/2 6.960
HBT040.00X050.00 40.00   5.00   5.549
HBT044.45X057.15 44.45 1.3/4 7.955
HBT045.00X055.00 45.00   6.35 1/4 6.165
HBT050.00X060.00 50.00   6.782
HBT050.00X065.00 50.00   5.00 10.635
HBT050.80X063.50 50.80 2 8.949
HBT050.80X069.85 50.80 2 7.50   14.178
HBT050.80X076.20 50.80 2 19.887
HBT055.00X065.00 55.00   6.35 1/4 7.398
HBT057.15X069.85 57.15 2.1/4 9.944
HBT060.00X070.00 60.00   5.00   8.015
HBT060.00X075.00 60.00   12.484
HBT063.00X075.00 63.00   6.35 1/4 10.209
HBT063.50X076.20 63.50 2.1/2 10.938
HBT063.50X082.55 63.50 2.1/2 5.00   17.163
HBT065.00X075.00 65.00   8.631
HBT065.00X080.00 65.00   5.00   13.409
HBT065.00X085.00 65.00   18.495
HBT069.85X082.55 69.85 2.3/4 7.50   11.932
HBT070.00X082.00 70.00   11.245
HBT070.00X085.00 70.00   6.35 1/4 14.334
HBT070.00X090.00 70.00   19.728
HBT075.00X090.00 75.00   9.53 3/8 15.258
HBT075.00X095.00 75.00   20.961
HBT076.20X082.55 76.20 3 12.70 1/2 6.368
HBT076.20X088.90 76.20 3 12.927
HBT076.20X092.08 76.20 3 5.00   16.470
HBT076.20X095.25 76.20 3 20.147
HBT076.20X101.60 76.20 3 6.35 1/4 27.842
HBT080.00X090.00 80.00   10.481
HBT080.00X095.00 80.00   5.00   16.183
HBT080.00X100.00 80.00   22.194
HBT082.55X095.25 82.55 3.1/4 7.50   13.921
HBT082.55X098.43 82.55 3.1/4 17.718
HBT082.55X101.60 82.55 3.1/4 6.00   21.640
HBT085.00X095.00 85.00   11.097
HBT085.00X105.00 85.00   6.35 1/4 23.427
HBT088.90X101.60 88.90 3.1/2 14.915
HBT088.90X104.78 88.90 3.1/2 9.53 3/8 18.961
HBT088.90X107.95 88.90 3 1/2 23.132
5.00  
Return to Start of Section
7.50  

10.00  

6.35 1/4

6.00  

7.50  

10.00  

7.50  

10.00  

3.18 1/8

6.35 1/4

7.94 5/16

9.53 3/8

12.70 1/2

5.00  

7.50  

10.00  

6.35 1/4

7.94 5/16

9.53 3/8

5.00  

10.00  

6.35 1/4

7.94 5/16

9.53 3/8 F2

PH: 0800 FITTINGS 24 HOURS. Return to Main Index

HONED BORE CYLINDER TUBE

Part No Tube ID Tube ID Wall Thickness Wall Thickness Weight
(mm) (”) (mm) (”) (Kg/m)
HBT088.90X114.30 88.9 3.1/2 12.70 1/2 32.400
HBT090.00X105.00 90.00   7.50   18.033
HBT090.00X110.00 90.00   10.00   24.660
HBT095.00X115.00 95.00   10.00   25.893
HBT095.25X114.30 95.25 3.3/4 9.53 3/8 24.624
HBT100.00X115.00 100.00   7.50   19.882
HBT100.00X120.00 100.00   10.00   27.126
HBT100.00X125.00 100.00   12.50   34.678
HBT100.00X130.00 100.00   15.00   42.539
HBT101.60X107.95 101.60 4 3.18 1/8 8.403
HBT101.60X114.30 101.60 4 6.35 1/4 16.904
HBT101.60X117.48 101.60 4 7.94 5/16 21.448
HBT101.60X120.65 101.60 4 9.53 3/8 26.117
HBT101.60X127.00 101.60 4 12.70 1/2 35.797
HBT105.00X125.00 105.00 10.00 28.360
HBT105.00X135.00 105.00   15.00   44.388
HBT105.00X140.00 105.00   17.50   52.865
HBT107.95X120.65 107.95 4.1/4 6.35 1/4 17.898
HBT107.95X127.00 107.95 4.1/4 9.53 3/8 27.609
HBT110.00X125.00 110.00   7.50   21.732
HBT110.00X130.00 110.00   10.00   29.592
HBT114.30X127.00 114.30 4.1/2 6.35 1/4 18.893
HBT114.30X130.18 114.30 4.1/2 7.94 5/16 23.935
HBT114.30X133.35 114.30 4.1/2 9.53 3/8 29.101
HBT114.30X139.70 114.30 4.1/2 12.70 1/2 39.774
HBT115.00X135.00 115.00   10.00   30.825
HBT115.00X140.00 115.00   12.50   39.302
HBT120.00X140.00 120.00   10.00   32.058
HBT120.00X150.00 120.00   15.00   49.937
HBT120.65X139.70 120.65 4.3/4 9.53 3/8 30.594
HBT125.00X145.00 125.00   10.00   33.291
HBT125.00X155.00 125.00   15.00   51.786
HBT127.00X133.35 127.00 5 3.18 1/8 10.209
HBT127.00X139.70 127.00 5 6.35 1/4 20.881
HBT127.00X142.88 127.00 5 7.94 5/16 26.421
HBT127.00X146.05 127.00 5 9.53 3/8 32.086
HBT127.00X152.40 127.00 5 12.70 1/2 43.752
HBT130.00X150.00 130.00   10.00   34.524
HBT130.00X160.00 130.00   15.00   53.636
HBT135.00X160.00 135.00   12.50   45.467
HBT135.00X165.00 135.00   15.00   56.485
HBT139.70X158.75 139.70 5.1/2 9.53 3/8 35.071
HBT139.70X165.10 139.70 5.1/2 12.70 1/2 47.729
HBT140.00X160.00 140.00   10.00   36.990
HBT140.00X165.00 140.00   12.50   47.008
HBT140.00X170.00 140.00   15.00   57.335
HBT145.00X175.00 145.00   15.00   59.184

Return to Start of Section PH: 0800 FITTINGS 24 HOURS. F3

Return to Main Index

HONED BORE CYLINDER TUBE

Part No Tube ID Tube ID Wall Thickness Wall Thickness Weight
(mm) (”) (mm) (”) (Kg/m)
HBT150.00X165.00 150.00   7.50   29.130
HBT150.00X170.00 150.00   10.00   39.456
HBT150.00X180.00 150.00   15.00   61.034
HBT152.40X160.34 152.40 6 3.97 5/32 15.309
HBT152.40X168.28 152.40 6 7.94 5/16 31.395
HBT152.40X171.45 152.40 6 9.53 3/8 38.055
HBT152.40X177.80 152.40 6 12.70 1/2 51.706
HBT160.00X180.00 160.00   10.00   41.922
HBT160.00X185.00 160.00   12.50   53.173
HBT160.00X190.00 160.00   15.00   64.733
HBT165.10X190.50 165.10 6 1/2 12.70 1/2 55.684
HBT170.00X200.00 170.00   15.00   68.432
HBT177.80X196.85 177.80 7 9.53 3/8 44.024
HBT177.80X203.20 177.80 7 12.70 1/2 59.661
HBT180.00X205.00 180.00   12.50   59.338
HBT180.00X210.00 180.00   15.00   72.131
HBT180.00X220.00 180.00   20.00   98.640
HBT190.00X220.00 190.00   15.00   75.830
HBT190.50X215.90 190.50 7 1/2 12.70 1/2 63.639
HBT200.00X230.00 200.00   15.00   79.529
HBT200.00X245.00 200.00   22.50   123.454
HBT203.20X215.90 203.20 8 6.35 1/4 32.814
HBT203.20X228.60 203.20 8 12.70 1/2 67.616
HBT203.20X241.30 203.20 8 19.05 3/4 104.407
HBT215.90X254.00 215.90 8 1/2 19.05 3/4 110.373
HBT220.00X260.00 220.00 20.00 118.370
HBT228.60X254.00 228.60 9 12.70 1/2 75.571
HBT228.60X273.00 228.60 9 22.23 7/8 137.301
HBT228.60X279.40 228.60 9 25.40 1 159.096
HBT228.60X298.45 228.60 9 34.93 1 3/8 226.998
HBT240.00X280.00 240.00 20.00 128.230
HBT250.00X300.00 250.00   25.00   169.538
HBT254.00X304.80 254.00 10 25.40 1 175.006
HBT260.00X300.00 260.00 20.00 138.100
HBT280.00X343.00 280.00 12 31.50 1.1/2 241.970
HBT304.80X381.00 304.80 38.10 322.170

PH: 0800 FITTINGS 24 HOURS. F4

Return to Start of Section Return to Main Index

HIGH QUALITY PRODUCTS FBLACK / GREYSCALE VERSION

F FLUIDEXCELFLEitNtiCnEgsIN SERVICE

If necessary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:
Spot:

SECTION G - HARD CHROME BARBlack - Pantone Black
Grey - Cool Grey 10

CMYK: Black RGB: Black
Grey C: 0 Red R: 0
C: 0 M: 0 R: 75 G: 0
M: 0 Y: 0 G: 75 B: 0
Y: 0 K: 100 B: 75
K: 70

Fluid Fittings Limited stocks chrome plated round bar that is generally used for the
manufacture of piston rods for hydraulic and pneumatic rams.

The bar is stocked as random lengths of typically 5.5 metres to 6.5 metres.
Occasionally we receive stock up to 8 metres long so please do not hesitate to
contact our sales staff if you need longer lengths.

Fluid Fittings Limited offers a same day cut and despatch service.

Where strength is critical then a material test certificate can be supplied.

The hard chrome bar part numbers system is described below:

HCB+++.++SUFFIX

Stands for hard chrome bar. Diameter in millimetres. This suffix denotes the grade of

Eg: 050.00 steel and if the steel is hardened.

For example a 70mm hard chrome bar could be supplied in the following forms:

• HCB070.00 (grade 1045 steel) **
• HCB070.00IH (grade 1045 steel induction hardened).
• HCB070.00IH38 (grade 38MnVS6 steel induction hardened). **
• HCB070.00IHHT (grade 4140 steel induction hardened). **

Note: ** denotes the most common options stocked.

The typical mechanical properties for the three steel grades are given in the following
table:

Steel Grade Diameter Range Yield Stress Tensile Stress Elongation
(mm) (Minimum Value) Rm (n/mm2) A (%)
Re (n/mm2)
CK45 18 ≤ Dia ≤ 40 580 to 850 ≥ 16
(AISI1045) 40 < Dia ≤ 160 305 560 to 800 ≥ 16
275
38MnVS6 18 < Dia ≤ 125 800 to 950 ≥ 12
520
42CrMo4 18 ≤ Dia ≤ 40 1000 to 1200 ≥ 11
(AISI4140) 40 < Dia ≤ 100 750 900 to 1100 ≥ 12
100 < Dia ≤ 125 650 800 to 950 ≥ 13
550

PH: 0800 FITTINGS 24 HOURS. G1

Return to Start of Section Return to Main Index

HARD CHROME BAR

Part No Bar OD Bar OD Weight
(mm) (”) (Kg/m)
HCB008.00
HCB009.53 8.00   0.395
HCB010.00 9.53 3/8 0.560
HCB012.00 10.00   0.617
HCB012.70 12.00   0.888
HCB014.00 12.70 1/2 0.994
HCB015.00 14.00   1.208
HCB015.88 15.00   1.387
HCB016.00 15.88 5/8 1.555
HCB018.00 16.00   1.578
HCB019.05 18.00   1.998
HCB020.00 19.05 3/4 2.237
HCB022.00 20.00   2.466
HCB022.23 22.00   2.984
HCB025.00 22.23 7/8 3.047
HCB025.40 25.00   3.853
HCB028.00 25.40 1 3.978
HCB028.58 28.00   4.834
HCB030.00 28.58 1.1/8 5.036
HCB031.75 30.00   5.549
HCB032.00 31.75 1.1/4 6.215
HCB034.93 32.00   6.313
HCB035.00 34.93 1.3/8 7.522
HCB036.00 35.00   7.553
HCB038.00 36.00   7.990
HCB038.10 38.00 8.903
HCB040.00 38.10 1.1/2 8.950
HCB041.28 40.00   9.865
HCB042.00 41.28 10.506
HCB044.45 42.00 1.5/8 10.876
HCB045.00 44.45 12.182
HCB050.00 45.00 1.3/4 12.485
HCB050.80 50.00   15.413
HCB055.00 50.80   15.911
HCB056.00 55.00 2 18.650
HCB057.15 56.00 19.335
HCB060.00 57.15 2.1/4 20.137
HCB063.00 60.00   22.195
HCB063.50 63.00   24.470
HCB065.00 63.50 24.860
HCB069.85 65.00 2.1/2 26.049
HCB070.00 69.85   30.081
HCB075.00 70.00 30.210
HCB076.20 75.00 2.3/4 34.680
HCB080.00 76.20   35.799
HCB082.55 80.00   39.458
HCB085.00 82.55 3 42.014
HCB088.90 85.00   44.545
HCB090.00 88.90 48.726
HCB095.00 90.00 3.1/4 49.940
95.00   55.643

3 1/2
 
 

PH: 0800 FITTINGS 24 HOURS. G2

Return to Start of Section Return to Main Index

HARD CHROME BAR

Part No Bar OD Bar OD Weight
(mm) (”) (Kg/m)
HCB095.25 95.25 3.3/4 55.936
HCB100.00 100.00   61.654
HCB101.60 101.60 4 63.643
HCB105.00 105.00   67.973
HCB110.00 110.00   74.601
HCB114.30 114.30 4.1/2 80.548
HCB115.00 115.00   81.537
HCB120.00 120.00   88.782
HCB125.00 125.00   96.334
HCB127.00 127.00 5 99.442
HCB130.00 130.00   104.195
HCB139.70 139.70 5.1/2 120.324
HCB140.00 140.00   120.842
HCB150.00 150.00   138.721
HCB152.40 152.40 6 143.196

NOTE 1:
The Above part numbers are for Hard Chrome Bar with grade
1045 steel and without induction hardening.
To order Hard Chrome Bar with high tensile steel and/or in-
duction hardening refer to the introduction for this section.

NOTE 2:
We are continually updating our size range, please contact
our sales staff to discuss availablily of sizes not listed.

PH: 0800 FITTINGS 24 HOURS. G3

Return to Start of Section Return to Main Index

Return to Start of Section Return to Main Index

HIGH QUALITY PRODUCTS BLACK / GREYSCALE VERSIONF

F FLUIDEXCELFLEitNtiCnEgsIN SERVICE

If necessary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:
Spot:

SECTION H - TUBE AND PIPE CLAMPSBlack - Pantone Black
Grey - Cool Grey 10

CMYK:

Grey Black RGB:
TABLE OF CONTENTSC: 0
M: 0C: 0Red Black
M: 0 R: 75 R: 0
G: 0
Y: 0 Y: 0 G: 75 B: 0

K: 70 K: 100 B: 75

Light Series Clamps
• Single Clamp Page H2
• Double Clamp Page H3

Heavy Duty Clamps
• Single Clamp Page H4

Jaw Sets

• Light Series Polypropelene Single Page H5
• Light Series Rubber Single Page H5
• Heavy Duty Series Polypropelene Single Page H6
• Heavy Duty Series Rubber Single Page H6
• Light Series Polypropelene Double Page H7
• Light Series Rubber Double Page H7

Metalwork

• Light Series Metalwork Single Page H8
• Light Series Metalwork Double Page H9
• Heavy Duty Series Metalwork Single Page H10

Accessories
• Stacking Bolts Page H11
• Tube Clamp Railing Page H12
• Tube Clamp Rail Nuts Page H12
• Tube Clamp Locking Plate Page H12

PH: 0800 FITTINGS 24 HOURS. H1

Return to Start of Section Return to Main Index

STANDARD SERIES SINGLE CLAMP

Part No TUBE OD TUBE OD DIM B DIM C DIM D BOLTS
(MM) (“) (MM) (MM) (MM)
CC2-07 6.0 1/4 34 27 20 M6X30
CC2-08 8.0 5/16 34 27 20 M6X30
CC2-09 3/8 34 27 20 M6X30
CC2-10 10.0 34 27 20 M6X30
CC2-12 12.0 1/2 34 27 20 M6X30
CC3-13 40 33 26 M6X35
CC3-14 14.0 5/8 40 33 26 M6X35
CC3-15 15.0 3/8 SCHEDULE 40 33 26 M6X35
CC3-16 16.0 40 33 26 M6X35
CC3-3/8”SCH 17.1 3/4 40 33 26 M6X35
CC3-18 18.0 40 33 26 M6X35
CC4-19 1/2 SCHEDULE 48 35 33 M6X40
CC4-20 20.0 7/8 48 35 33 M6X40
CC4-1/2”SCH 21.3 1 48 35 33 M6X40
CC4-22 22.0 3/4 SCHEDULE 48 35 33 M6X40
CC4-25 25.0 48 35 33 M6X40
CC5-3/4”SCH 26.7 1.1/4 57 42 40 M6X45
CC5-28 28.0 1 SCHEDULE 57 42 40 M6X45
CC5-30 30.0 57 42 40 M6X45
CC6-32 1.1/2 70 58 52 M6X60
CC6-1”SCH 33.4 70 58 52 M6X60
CC6-35 35.0 2 70 58 52 M6X60
CC6-38 38.0 2.1/4 70 58 52 M6X60
CC6-42 42.0 70 58 52 M6X60
CC7-48 48.0 86 66 66 M6X70
CC7-50 50.0 86 66 66 M6X70
CC7-57 57.0 86 66 66 M6X70

PH: 0800 FITTINGS 24 HOURS. H2

Return to Start of Section Return to Main Index

STANDARD SERIES DOUBLE CLAMP

Part No TUBE OD TUBE OD DIM B DIM C DIM D BOLTS
(MM) (“) (MM) (MM) (MM)
CF1-07 6.0 1/4 34 27 20 M6X35
CF1-08 8.0 5/16 34 27 20 M6X35
CF1-09 3/8 34 27 20 M6X35
CF1-10 10.0 34 27 20 M6X35
CF1-12 12.0 1/2 34 27 20 M6X35
CF2-13 51 26 29 M8X35
CF2-14 14.0 5/8 51 26 29 M8X35
CF2-15 15.0 3/8 SCHEDULE 51 26 29 M8X35
CF2-16 16.0 51 26 29 M8X35
CF2-3/8SCH 17.1 3/4 51 26 29 M8X35
CF2-18 18.0 51 26 29 M8X35
CF3-19 1/2 SCHEDULE 64 37 36 M8X45
CF3-20 20.0 7/8 64 37 36 M8X45
CF3-1/2SCH 21.3 1 64 37 36 M8X45
CF3-22 22.0 64 37 36 M8X45
CF3-25 25.0 3/4 SCHEDULE 64 37 36 M8X45
CF4-28 28.0 78 42 45 M8X50
CF4-3/4SCH 26.7 1.1/4 78 42 45 M8X50
CF4-30 30.0 1 SCHEDULE 78 42 45 M8X50
CF5-32 102 54 56 M8X60
CF5-1SCH 33.4 1.1/2 102 54 56 M8X60
CF5-35 35.0 102 54 56 M8X60
CF5-38 38.0 102 54 56 M8X60
CF5-42 42.0 102 54 56 M8X60

PH: 0800 FITTINGS 24 HOURS. H3

Return to Start of Section Return to Main Index

HEAVY DUTY SERIES SINGLE TUBE CLAMP

Part No TUBE OD TUBE OD DIM B DIM C DIM D BOLTS
(MM) (“) (MM) (MM) (MM)
CP1-13 1/2 55 32 33 M10X40
CP1-16 16.0 5/8 55 32 33 M10X40
CP2-19 3/4 70 48 45 M10X60
CP2-20 20.0 70 48 45 M10X60
CP2-22 22.0 1 70 48 45 M10X60
CP2-25 25.0 70 48 45 M10X60
CP2-28 28.0 1.1/4 70 48 45 M10X60
CP3-30 30.0 85 60 60 M10X70
CP3-32 1.1/2 85 60 60 M10X70
CP3-35 35.0 2 85 60 60 M10X70
CP3-38 38.0 3 85 60 60 M10X70
CP4-50 50.0 115 90 90 M12X100
CP5-76 76.0 152 120 122 M16X130

HEAVY DUTY SERIES SINGLE SCHEDULE PIPE CLAMP

Part No PIPE OD SCHEDULE DIM B DIM C DIM D BOLTS
PIPE SIZE
CP2-1/2SCH (MM) (“) (MM) (MM) (MM) M10X60
CP2-3/4SCH 21.3 1/2 70 48 45 M10X60
CP3-1SCH 26.7 3/4 70 48 45 M10X70
CP3-1.1/4SCH 33.4 1 85 60 60 M10X70
CP4-1SCH 42.2 1.1/4 85 60 60 M12X100
CP4-1.1/4SCH 33.4 1 115 90 90 M12X100
CP4-1.1/2SCH 42.2 1.1/4 115 90 90 M12X100
CP4-2SCH 48.3 1.1/2 115 90 90 M12X100
CP5-2.1/2SCH 60.3 2 115 90 90 M16X130
CP5-3SCH 73.0 2.1/2 152 120 122 M16X130
88.9 3 152 120 122

PH: 0800 FITTINGS 24 HOURS. H4

Return to Start of Section Return to Main Index

STANDARD SERIES SINGLE STANDARD SERIES SINGLE
POLYPROPYLENE JAW SETS RUBBER JAW SETS

Part No TUBE OD TUBE OD Part No TUBE OD TUBE OD
(MM) (“) (MM) (“)
CC2-07JS 6.0 1/4 CC2-07RIJS 6.0 1/4
CC2-08JS 8.0 5/16 CC2-08RIJS 8.0 5/16
CC2-09JS 3/8 CC2-09RIJS 3/8
CC2-10JS 10.0 CC2-10RIJS 10.0
CC2-12JS 12.0 1/2 CC2-12RIJS 12.0 1/2
CC3-13JS CC3-13RIJS
CC3-14JS 14.0 5/8 CC3-14RIJS 14.0 5/8
CC3-15JS 15.0 3/8 SCHEDULE CC3-15RIJS 15.0 3/8 SCHEDULE
CC3-16JS 16.0 CC3-16RIJS 16.0
CC3-3/8SCHJS 17.1 3/4 CC3-3/8SCHRIJS 17.1 3/4
CC3-18JS 18.0 CC3-18RIJS 18.0
CC4-19JS 1/2 SCHEDULE CC4-19RIJS 1/2 SCHEDULE
CC4-20JS 20.0 7/8 CC4-20RIJS 20.0 7/8
CC4-1/2SCHJS 21.3 1 CC4-1/2SCHRIJS 21.3 1
CC4-22JS 22.0 3/4 SCHEDULE CC4-22RIJS 22.0 3/4 SCHEDULE
CC4-25JS 25.0 CC4-25RIJS 25.0
CC5-3/4SCHJS 26.7 1.1/4 CC5-3/4SCHRIJS 26.7 1.1/4
CC5-28JS 28.0 1 SCHEDULE CC5-28RIJS 28.0 1 SCHEDULE
CC5-30JS 30.0 CC5-30RIJS 30.0
CC6-32JS 1.1/2 CC6-32RIJS 1.1/2
CC6-1SCHJS 33.4 CC6-1SCHRIJS 33.4
CC6-35JS 35.0 2 CC6-35RIJS 35.0 2
CC6-38JS 38.0 2.1/4 CC6-38RIJS 38.0 2.1/4
CC6-42JS 42.0 CC6-42RIJS 42.0
CC7-48JS 48.0 CC7-48RIJS 48.0
CC7-50JS 50.0 CC7-50RIJS 50.0
CC7-57JS 57.0 CC7-57RIJS 57.0

PH: 0800 FITTINGS 24 HOURS. H5

Return to Start of Section Return to Main Index

HEAVY DUTY SERIES SINGLE HEAVY DUTY SERIES SINGLE
POLYPROPYLENE JAW SETS RUBBER JAW SETS

Part No TUBE OD TUBE OD Part No TUBE OD TUBE OD
(MM) (“) (MM) (“)
CP1-13JS 1/2 CP1-13RIJS 1/2
CP1-16JS 16.0 5/8 CP1-16RIJS 16.0 5/8
CP2-19JS 3/4 CP2-19RIJS 3/4
CP2-20JS 20.0 CP2-20RIJS 20.0
CP2-1/2SCHJS 21.3 1/2 SCHEDULE CP2-1/2SCHRIJS 21.3 1/2 SCHEDULE
CP2-22JS 22.0 CP2-22RIJS 22.0
CP2-25JS 25.0 3/4 SCHEDULE CP2-25RIJS 25.0 3/4 SCHEDULE
CP2-3/4SCHJS 26.7 CP2-3/4SCHRIJS 26.7
CP2-28JS 28.0 1.1/4 CP2-28RIJS 28.0 1.1/4
CP3-30JS 30.0 1 SCHEDULE CP3-30RIJS 30.0 1 SCHEDULE
CP3-32JS 32.0 CP3-32RIJS 32.0
CP3-1SCHJS 33.4 1.1/2 CP3-1SCHRIJS 33.4 1.1/2
CP3-35JS 35.0 1.1/4 SCHEDULE CP3-35RIJS 35.0 1.1/4 SCHEDULE
CP3-38JS 38.0 1 SCHEDULE CP3-38RIJS 38.0 1 SCHEDULE
CP3-1.1/4SCHJS 42.2 1.1/4 SCHEDULE CP3-1.1/4SCHRIJS 42.2 1.1/4 SCHEDULE
CP4-1SCHJS 33.4 1.1/2 SCHEDULE CP4-1SCHRIJS 33.4 1.1/2 SCHEDULE
CP4-1.1/4SCHJS 42.2 2 CP4-1.1/4SCHRIJS 42.2 2
CP4-1.1/2SCHJS 48.3 2 SCHEDULE CP4-1.1/2SCHRIJS 48.3 2 SCHEDULE
CP4-50JS 50.0 2.1/2 SCHEDULE CP4-50RIJS 50.0 2.1/2 SCHEDULE
CP4-2SCHJS 60.3 3 CP4-2SCHRIJS 60.3 3
CP5-2.1/2SCHJS 73.0 3 SCHEDULE CP5-2.1/2SCHRIJS 73.0 3 SCHEDULE
CP5-76JS 76.0 CP5-76RIJS 76.0
CP5-3SCHJS 88.9 CP5-3SCHRIJS 88.9

PH: 0800 FITTINGS 24 HOURS. H6

Return to Start of Section Return to Main Index

STANDARD SERIES DOUBLE STANDARD SERIES DOUBLE
POLYPROPYLENE JAW SETS RUBBER JAW SETS

Part No TUBE OD TUBE OD Part No TUBE OD TUBE OD
(MM) (“) (MM) (“)
CF1-07JS 6.0 1/4 CF1-07RIJS 6.0 1/4
CF1-08JS 8.0 5/16 CF1-08RIJS 8.0 5/16
CF1-09JS 3/8 CF1-09RIJS 3/8
CF1-10JS 10.0 CF1-10RIJS 10.0
CF1-12JS 12.0 1/2 CF1-12RIJS 12.0 1/2
CF2-13JS CF2-13RIJS
CF2-14JS 14.0 5/8 CF2-14RIJS 14.0 5/8
CF2-15JS 15.0 3/8 SCHEDULE CF2-15RIJS 15.0 3/8 SCHEDULE
CF2-16JS 16.0 CF2-16RIJS 16.0
CF2-3/8SCHJS 17.1 3/4 CF2-3/8SCHRIJS 17.1 3/4
CF2-18JS 18.0 CF2-18RIJS 18.0
CF3-19JS 1/2 SCHEDULE CF3-19RIJS 1/2 SCHEDULE
CF3-20JS 20.0 7/8 CF3-20RIJS 20.0 7/8
CF3-1/2SCHJS 21.3 1 CF3-1/2SCHRIJS 21.3 1
CF3-22JS 22.0 3/4 SCHEDULE CF3-22RIJS 22.0 3/4 SCHEDULE
CF3-25JS 25.0 CF3-25RIJS 25.0
CF4-3/4SCHJS 26.7 1.1/4 CF4-3/4SCHRIJS 26.7 1.1/4
CF4-28JS 28.0 1 SCHEDULE CF4-28RIJS 28.0 1 SCHEDULE
CF4-30JS 30.0 CF4-30RIJS 30.0
CF5-32JS 1.1/2 CF5-32RIJS 1.1/2
CF5-1SCHJS 33.4 CF5-1SCHRIJS 33.4
CF5-35JS 35.0 CF5-35RIJS 35.0
CF5-38JS 38.0 CF5-38RIJS 38.0
CF5-42JS 42.0 CF5-42RIJS 42.0

PH: 0800 FITTINGS 24 HOURS. H7

Return to Start of Section Return to Main Index

STANDARD SERIES SINGLE CLAMP STANDARD SERIES SINGLE CLAMP
STEEL BOLTS 316 STAINLESS STEEL BOLTS

Part No GROUP SIZE Part No GROUP SIZE
CC2-B CC2 SCC2-B CC2
CC3-B CC3 SCC3-B CC3
CC4-B CC4 SCC4-B CC4
CC5-B CC5 SCC5-B CC5
CC6-B CC6 SCC6-B CC6
CC7-B CC7 SCC7-B CC7

NOTE:
2 Bolts required

per clamp

STANDARD SERIES SINGLE CLAMP STANDARD SERIES SINGLE
STEEL BOTTOM PLATE CLAMP 316 STAINLESS STEEL
BOTTOM PLATE

Part No GROUP SIZE Part No GROUP SIZE
CC2-BP CC2 SCC2-BP CC2
CC3-BP CC3 SCC3-BP CC3
CC4-BP CC4 SCC4-BP CC4
CC5-BP CC5 SCC5-BP CC5
CC6-BP CC6 SCC6-BP CC6
CC7-BP CC7 SCC7-BP CC7

STANDARD SERIES SINGLE CLAMP STANDARD SERIES SINGLE CLAMP
STEEL TOP PLATE 316 STAINLESS STEEL TOP PLATE

Part No GROUP SIZE Part No GROUP SIZE
CC2-TP CC2 SCC2-TP CC2
CC3-TP CC3 SCC3-TP CC3
CC4-TP CC4 SCC4-TP CC4
CC5-TP CC5 SCC5-TP CC5
CC6-TP CC6 SCC6-TP CC6
CC7-TP CC7 SCC7-TP CC7

PH: 0800 FITTINGS 24 HOURS. H8

Return to Start of Section Return to Main Index

STANDARD SERIES DOUBLE CLAMP STANDARD SERIES DOUBLE CLAMP
STEEL BOLTS 316 STAINLESS STEEL BOLTS

Part No GROUP SIZE Part No GROUP SIZE
CF1-B CF1 SCF1-B CF1
CF2-B CF2 SCF2-B CF2
CF3-B CF3 SCF3-B CF3
CF4-B CF4 SCF4-B CF4
CF5-B CF5 SCF5-B CF5

STANDARD SERIES DOUBLE CLAMP STANDARD SERIES DOUBLE CLAMP
STEEL BOTTOM PLATE 316 STAINLESS STEEL BOTTOM
PLATE

Part No GROUP SIZE Part No GROUP SIZE
CF1-BP CF1 SCF1-BP CF1
CF2-BP CF2 SCF2-BP CF2
CF3-BP CF3 SCF3-BP CF3
CF4-BP CF4 SCF4-BP CF4
CF5-BP CF5 SCF5-BP CF5

STANDARD SERIES DOUBLE CLAMP STANDARD SERIES DOUBLE CLAMP
STEEL TOP PLATE 316 STAINLESS STEEL TOP PLATE

Part No GROUP SIZE Part No GROUP SIZE
CF1-TP CF1 SCF1-TP CF1
CF2-TP CF2 SCF2-TP CF2
CF3-TP CF3 SCF3-TP CF3
CF4-TP CF4 SCF4-TP CF4
CF5-TP CF5 SCF5-TP CF5

PH: 0800 FITTINGS 24 HOURS. H9

Return to Start of Section Return to Main Index

HEAVY DUTY SERIES SINGLE CLAMP
STEEL BOLTS

Part No GROUP SIZE
CP1-B CP1
CP2-B CP2
CP3-B CP3
CP4-B CP4
CP5-B CP5

NOTE:
2 Bolts required

per clamp

HEAVY DUTY SERIES SINGLE CLAMP
STEEL BOTTOM PLATE

Part No GROUP SIZE
CP1-BP CP1
CP2-BP CP2
CP3-BP CP3
CP4-BP CP4
CP5-BP CP5

HEAVY DUTY SERIES SINGLE CLAMP
STEEL TOP PLATE

Part No GROUP SIZE
CP1-TP CP1
CP2-TP CP2
CP3-TP CP3
CP4-TP CP4
CP5-TP CP5

PH: 0800 FITTINGS 24 HOURS. H10

Return to Start of Section Return to Main Index

STANDARD SERIES SINGLE STANDARD SERIES SINGLE
CLAMP STEEL STACKING BOLT CLAMP 316 STAINLESS STEEL
STACKING BOLT

Part No GROUP SIZE Part No GROUP SIZE
CC2-SB CC2 SCC2-SB CC2
CC3-SB CC3 SCC3-SB CC3
CC4-SB CC4 SCC4-SB CC4
CC5-SB CC5 SCC5-SB CC5
CC6-SB CC6 SCC6-SB CC6
CC7-SB CC7 SCC7-SB CC7

STANDARD SERIES DOUBLE STANDARD SERIES DOUBLE
CLAMP STEEL STACKING BOLT CLAMP 316 STAINLESS STEEL
STACKING BOLT

Part No GROUP SIZE Part No GROUP SIZE
CF1-SB CF1 SCF1-SB CF1
CF2-SB CF2 SCF2-SB CF2
CF3-SB CF3 SCF3-SB CF3
CF4-SB CF4 SCF4-SB CF4
CF5-SB CF5 SCF5-SB CF5

PH: 0800 FITTINGS 24 HOURS. H11

Return to Start of Section Return to Main Index

TUBE CLAMP RAILING

Part No DESCRIPTION
TCR14MM 14MM HIGH X 2 METRE STEEL
RAILING
TCR14MM-316 14MM HIGH X 2 METRE 316 SS
RAILING

TUBE CLAMP RAIL NUTS

Part No DESCRIPTION
TCRNM6 M6 STEEL RAIL NUT
TCRNM8 M8 STEEL RAIL NUT
TCRNM6-316 M6 316 SS RAIL NUT
TCRNM8-316 M8 316 SS RAIL NUT

TUBE CLAMP LOCKING PLATE

Part No DESCRIPTION
TCLPSM6 STEEL SINGLE CLAMP LOCKING PLATE M6
TCLPSM6-316 316SS SINGLE CLAMP LOCKING PLATE M6
TCLPDM6 STEEL DOUBLE CLAMP LOCKING PLATE M6
TCLPDM8 STEEL DOUBLE CLAMP LOCKING PLATE M8
TCLPDM6-316 316SS DOUBLE CLAMP LOCKING PLATE M6
TCLPDM8-316 316SS DOUBLE CLAMP LOCKING PLATE M8

PH: 0800 FITTINGS 24 HOURS. H12

Return to Start of Section Return to Main Index