HIGH QUALITY PRODUCTS BLACK / GREYSCALE VERSIONF
F FLUIDEXCELFLEitNtiCnEgsIN SERVICE
If necessary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:
Spot:
SECTION IBlack - Pantone Black
Grey - Cool Grey 10
CMYK:
SwivelsGrey Black RGB: Black
C: 0 C: 0 Red R: 0
M: 0 M: 0 R: 75 G: 0
G: 75 B: 0
Y: 0 Y: 0 B: 75
K: 70 K: 100
TABLE OF CONTENTS Page I2
Techni-Turn 90° Stainless Steel Rotary Elbows
Techni-Turn 90° Steel Swivel Elbows Page I6
Water Blaster Straight Swivels Page I9
Steel Hot Bitumen Straight Swivels Page I10
Hydraulics Inc. Steel High Pressure Straight Swivels Page I11
Hydraulics Inc. Steel 3000psi Straight Swivels Page I13
Hydraulics Inc. Steel 3000psi 90° Swivels Page I16
IMPORTANT NOTE:
Swivels should not be subject to undue side loading.
Care must be taken with the design of the pipework / hosing to
ensure this does not happen.
PH: 0800 FITTINGS 24 HOURS. I1
Return to Start of Section Return to Main Index
TECHNI-TURN STAINLESS STEEL
90° ROTARY ELBOW
PRODUCT SPECIFICATION
The Techni-turn 90 degree Rotary Elbow is manufactured from 316 stainless steel and
combined with the right seals and shaft support can be used for a very wide variety of fluid
transfer applications. See ‘ALTERNATIVE SEALS & BEARINGS’ on page I4.
Standard threads are BSPP Female & BSPT Male.
Working Pressure: Sizes 1/4” - 1” - 275 bar
Sizes 1.1/4” - to 1.1/2” - 206 bar
Size HEX. C BODY D DIM. E DIM. F
62mm
1/4” & 3/8” 7/8” AF 28.5mm Sq. 43mm 79mm
1/2” 1.1/8” AF 38.0mm Sq. 56mm 89mm
3/4” 1.3/8” AF 48.5mm Sq. 70mm 102mm
1” 1.3/4” AF 53.5mm Sq. 80mm 102mm
1.1/4” 58.0mm Sq. 83mm 120mm
1.1/2” 2” AF 63.0mm Sq. 91mm
56mm AF I2
***NOTE** See Page I19 for technical details Return to Main Index
PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section
TECHNI-TURN STAINLESS STEEL
90° ROTARY ELBOW
The techni-turn stainless steel 90° rotary elbow can be ordered in four different configurations
as detailed below.
STANDARD CONFIGURATION FEMALE FEMALE CONFIGURATION
• Female Body BSPPF • Female Body BSPPF
• Male Shaft BSPT • Female Shaft BSPPF
• PETP Bush • PETP Bush
• Nitrile Seals • Nitrile Seals
Part No SIZE Working Part No SIZE Working
(“) Pressure (Bar) (“) Pressure (Bar)
SS-RE-0404-STD 1/4 275 SS-RE-0404-FF 1/4 275
SS-RE-0606-STD 3/8 275 SS-RE-0606-FF 3/8 275
SS-RE-0808-STD 1/2 275 SS-RE-0808-FF 1/2 275
SS-RE-1212-STD 3/4 275 SS-RE-1212-FF 3/4 275
SS-RE-1616-STD 1 275 SS-RE-1616-FF 1 275
SS-RE-2020-STD 1.1/4 206 SS-RE-2020-FF 1.1/4 206
SS-RE-2424-STD 1.1/2 206 SS-RE-2424-FF 1.1/2 206
REVERSE CONFIGURATION MALE MALE CONFIGURATION
• Male Body BSPT • Male Body BSPT
• Female Shaft BSPPF • Male Shaft BSPT
• PETP Bush • PETP Bush
• Nitrile Seals • Nitrile Seals
Part No SIZE Working Part No SIZE Working
(“) Pressure (Bar) (“) Pressure (Bar)
SS-RE-0404-REV 1/4 275 SS-RE-0404-MM 1/4 275
SS-RE-0606-REV 3/8 275 SS-RE-0606-MM 3/8 275
SS-RE-0808-REV 1/2 275 SS-RE-0808-MM 1/2 275
SS-RE-1212-REV 3/4 275 SS-RE-1212-MM 3/4 275
SS-RE-1616-REV 1 275 SS-RE-1616-MM 1 275
SS-RE-2020-REV 1.1/4 206 SS-RE-2020-MM 1.1/4 206
SS-RE-2424-REV 1.1/2 206 SS-RE-2424-MM 1.1/2 206
See page I4 for information on ordering the swivels with alternative seals and bearings.
PH: 0800 FITTINGS 24 HOURS. I3
Return to Start of Section Return to Main Index
TECHNI-TURN STAINLESS STEEL
90° ROTARY ELBOW
Alternative Seals and Bearings
The Techni-turn 90° stainless steel rotary elbows can be
supplied with alternative seals and bearings.
To order these alternatives, we have used the example of a
SS-RE-0404-STD to demonstrate how the part numbers are
changed when ordering alternative seals and bearings.
Part No SEAL SHAFT
MATERIAL SUPPORT
SS-RE-0404-STD Nitrile PETP Bushes
SS-V-RE-0404-STD Viton Teflon Bushes
SS-E-RE-0404-STD EPR Teflon Bushes
SS-B-RE-0404-STD Nitrile Ball Bearings
SS-BV-RE-0404-STD Viton Ball Bearings
SS-BE-RE-0404-STD EPR Ball Bearings
Repair Kits
The Stainless Steel 90 degree Rotary Elbow Repair Kit consists of:
• 2 x Main ‘O’ Rings.
• 2 x Teflon Backup Washers.
• 2 x Bushes (or Bearings).
• 1 x 316 SS Circlip.
***NOTE** See adjacent table on I5 for Repair Kit part numbers.
PH: 0800 FITTINGS 24 HOURS. I4
Return to Start of Section Return to Main Index
TECHNI-TURN STAINLESS STEEL
90° ROTARY ELBOW REPAIR KITS
Part No Rotary Seal Shaft
SSRK-RE-0406 Elbow Size (“) Material Support
SSRK-RE-0808 1/4 & 3/8 Nitrile PETP bush
SSRK-RE-1212 1/2 Nitrile PETP bush
SSRK-RE-1616 3/4 Nitrile PETP bush
SSRK-RE-2020 1 Nitrile PETP bush
SSRK-RE-2424 1.1/4 Nitrile PETP bush
1.1/2 Nitrile PETP bush
SSRK-V-RE-0406 1/4 & 3/8 Viton Teflon Bush
SSRK-V-RE-0808 1/2 Viton Teflon Bush
SSRK-V-RE-1212 3/4 Viton Teflon Bush
SSRK-V-RE-1616 1 Viton Teflon Bush
SSRK-V-RE-2020 1.1/4 Viton Teflon Bush
SSRK-V-RE-2424 1.1/2 Viton Teflon Bush
SSRK-E-RE-0406 1/4 & 3/8 EPR Teflon Bush
SSRK-E-RE-0808 1/2 EPR Teflon Bush
SSRK-E-RE-1212 3/4 EPR Teflon Bush
SSRK-E-RE-1616 1 EPR Teflon Bush
SSRK-E-RE-2020 1.1/4 EPR Teflon Bush
SSRK-E-RE-2424 1.1/2 EPR Teflon Bush
SSRK-B-RE-0406 1/4 & 3/8 Nitrile Sealed Ball Bearing
SSRK-B-RE-0808 1/2 Nitrile Sealed Ball Bearing
SSRK-B-RE-1212 3/4 Nitrile Sealed Ball Bearing
SSRK-B-RE-1616 1 Nitrile Sealed Ball Bearing
SSRK-B-RE-2020 1.1/4 Nitrile Sealed Ball Bearing
SSRK-B-RE-2424 1.1/2 Nitrile Sealed Ball Bearing
SSRK-BV-RE-0406 1/4 & 3/8 Viton Sealed Ball Bearing
SSRK-BV-RE-0808 1/2 Viton Sealed Ball Bearing
SSRK-BV-RE-1212 3/4 Viton Sealed Ball Bearing
SSRK-BV-RE-1616 1 Viton Sealed Ball Bearing
SSRK-BV-RE-2020 1.1/4 Viton Sealed Ball Bearing
SSRK-BV-RE-2424 1.1/2 Viton Sealed Ball Bearing
SSRK-BE-RE-0406 1/4 & 3/8 EPR Sealed Ball Bearing
SSRK-BE-RE-0808 1/2 EPR Sealed Ball Bearing
SSRK-BE-RE-1212 3/4 EPR Sealed Ball Bearing
SSRK-BE-RE-1616 1 EPR Sealed Ball Bearing
SSRK-BE-RE-2020 1.1/4 EPR Sealed Ball Bearing
SSRK-BE-RE-2424 1.1/2 EPR Sealed Ball Bearing
PH: 0800 FITTINGS 24 HOURS. I5
Return to Start of Section Return to Main Index
TECHNI-TURN NICKEL PLATED MILD STEEL
90° SWIVEL ELBOW
PRODUCT SPECIFICATION
The Techni-turn 90 degree Swivel Elbow is manufactured from mild steel and is then nickel
plated. While not as corrosion resistant as the stainless steel Rotary Elbow it offers a cost
competitive alternative and is ideal for hydraulic applications.
The standard unit comes with nitrile rubber main seals, dust seals and teflon back up
washers. Sizes are from 1/4” to 3/4” and standard threads are BSPP Female & BSPT Male.
Flow rates are the same as for Stainless Steel Rotary Elbows.
WARNING : THESE ARE DESIGNED TO SWIVEL ONLY. DO NOT USE FOR CONSTANT
ROTATION OR SIDEWAYS LOAD APPLICATIONS AS THE SHAFT IS SUPPORTED BY
‘O’RINGS ONLY AND THE SWIVEL MAY FAIL PREMATURELY.
Maximum Recommended Working Pressure : 206 bar
Size HEX. C BODY. D DIM. E DIM. F
1/4” & 3/8” 7/8” AF 25.3mm Sq 40mm 56mm
1/2” 1.1/8” AF 32.0mm Sq 51mm 70mm
3/4” 1.3/8” AF 44.0mm Sq 68mm 87mm
PH: 0800 FITTINGS 24 HOURS. I6
Return to Start of Section Return to Main Index
TECHNI-TURN NICKEL PLATED MILD STEEL
90° SWIVEL ELBOW
Part Numbers & Ordering
Part No Thread A Body Thread B Shaft Seal Material Working
RE-0404-STD 1/4” BSPPF 1/4” BSPT Nitrile Pressure (Bar)
RE-0606-STD 3/8” BSPPF 3/8” BSPT Nitrile 206
RE-0606-REV 3/8” BSPT 3/8” BSPPF Nitrile 206
RE-0606-FF 3/8” BSPPF 3/8” BSPPF Nitrile 206
RE-0606-MM 3/8” BSPT 3/8” BSPT Nitrile 206
RE-0808-STD 1/2” BSPPF 1/2” BSPT Nitrile 206
RE-1212-STD 3/4” BSPPF 3/4” BSPT Nitrile 206
206
RE-V-0404-STD 1/4” BSPPF 1/4” BSPT Viton 206
RE-V-0606-STD 3/8” BSPPF 3/8” BSPT Viton 206
RE-V-0606-REV 3/8” BSPT 3/8” BSPPF Viton 206
RE-V-0606-FF 3/8” BSPPF 3/8” BSPPF Viton 206
RE-V-0606-MM 3/8” BSPT 3/8” BSPT Viton 206
RE-V-0808-STD 1/2” BSPPF 1/2” BSPT Viton 206
RE-V-1212-STD 3/4” BSPPF 3/4” BSPT Viton 206
RE-E-0404-STD 1/4” BSPPF 1/4” BSPT EPR 206
RE-E-0606-STD 3/8” BSPPF 3/8” BSPT EPR 206
RE-E-0606-REV 3/8” BSPT 3/8” BSPPF EPR 206
RE-E-0606-FF 3/8” BSPPF 3/8” BSPPF EPR 206
RE-E-0606-MM 3/8” BSPT 3/8” BSPT EPR 206
RE-E-0808-STD 1/2” BSPPF 1/2” BSPT EPR 206
RE-E-1212-STD 3/4” BSPPF 3/4” BSPT EPR 206
PH: 0800 FITTINGS 24 HOURS. I7
Return to Start of Section Return to Main Index
TECHNI-TURN NICKEL PLATED MILD STEEL
90° SWIVEL ELBOW
Repair Kits
The Nickel Plated Mild Steel 90 degree Swivel Elbow Repair Kit consists of:
• 2 x Main ‘O’ Rings
• 2 x Teflon Backup Washers
• 2 x Dust ‘O’ Rings
• 1 x Steel Circlip
Part No. SWIVEL SIZE SEAL
MATERIAL
RK-SE-0406 1/4” & 3/8” Nitrile
RK-SE-0808 1/2” Nitrile
RK-SE-1212 3/4” Nitrile
RK-V-SE-0406 1/4” & 3/8”
RK-V-SE-0808 1/2” Viton
RK-V-SE-1212 3/4”
RK-E-SE-0406 1/4” & 3/8” Viton
RK-E-SE-0808 1/2” Viton
RK-E-SE-1212 3/4”
EPR
EPR
EPR
PH: 0800 FITTINGS 24 HOURS. I8
Return to Start of Section Return to Main Index
WATER BLASTER STRAIGHT SWIVEL
The Water Blaster Straight Swivel is available in Brass or Stainless Steel material and is
designed for use on spray guns to take the twisting out of the hose.
The threads are BSPP male and BSPP female.
Part No SIZE Material Working
BRSS-04 (“) Pressure (Bar)
BRSS-06
BRSS-08 1/4 Brass 280
STSTSS-04
STSTSS-06 3/8 Brass 280
STSTSS-08
1/2 Brass 280
1/4 Stainless steel 390
3/8 Stainless steel 390
1/2 Stainless steel 200
PH: 0800 FITTINGS 24 HOURS. I9
Return to Start of Section Return to Main Index
TECHNI-TURN HOT BITUMEN STRAIGHT SWIVEL
The Techni-turn Hot Bitumen Straight Swivel is manufactured from mild steel with a plated
finish.
It has a very simple yet rugged design with no flow restrictions.
These are designed for any bitumen or low pressure application to stop twisting of the hose.
Threads are BSPT Male and BSPT Female. Sealing is via Viton ‘O’rings.
Part No SIZE
(“)
BSS-12 3/4
BSS-16 1
BSS-20 1.1/4
BSS-24 1.1/2
BSS-32 2
BSS-48 3
BSS-64 4
PH: 0800 FITTINGS 24 HOURS. I10
Return to Start of Section Return to Main Index
HS SERIES / HBEAARVRYEDLUTY IN-LINE / FULL FLOW
®
STEM 1STSEMYNTHETIC RUBBER O-
2 TEFLON™ BACK UP RIN
BARREL 3 DOUBLE ROW RETAINE
4 DUST SEAL
5 BALL HOLE PLUG (TWO
C RUBBER O-RING 1 SYNTHETIC RUBBER O-RING
BACK UP RING 2 TEFLON™ BACK UP RING
3 DOUBLE ROW RETAINER BALLS (THRUST BEARING)
4 DUST SEAL
5 BALL HOLE PLUG (TWO)
OW RETAINHEYRDBRAALULLSI(CTSH,RINUCS.TDBeEsAigRnINFGea) tures
LE PLUG (TW•O)•HYDTRhrAouUghLhICarSde,nINedCa.TlloDhyesrstoeigeulnbgaFrhreeal hatunadrerssdtemened alloy steel barrel and stem• Standard O-Ring and back up ring - Field replaceable seal kits
• • dBuernfilsehecdtbioarrnel &borelfoorwexternodetdasteioal nlife.torque. •
• •
•• Optional seal materials available •
Large wear surface for angular deflection & low rotation torque. •
•
Large wear surface for angularImproved bearing design greatly extends useful life
•• Dual Race design imIpmrovpesroresvisetadncebtoesaiderilnoagds design great•ly eLoxwtperenssdurse durospeful life
•• Permanently lubricated bearing • Protective treatment meeting SAE standards
• Chrome retainer ballsD- uLoangl liRfe.ace design improves resistance to side loads
• Permanently lubricated bearing
• Chrome retainer balls - Long life.
orque. • Standard O-Ring and back up ring - Field replaceable seal kits
CAUTION:
Do not attempt to disconnect and disassemble swivels under pressure. Do not remove the swivel barrel from stem while under
• Burnished barrel bore for extended seal life.pressure. Do not attempt to operate damaged swivels and do not operate swivels displaying fluid leak and/or obvious bearing
• Optional seal materials availablewear. Consider that a selected swivels rated pressure cannot exceed the lowest rating of the swivel and of it’s selected ports.
Refer to page 3, Safety Information, Selecting and Using Hydraulics, Inc. Swivel Joints.
• Low pressure dropPressure Limitations:
Maximum working pressure for “HS” Series swivels is dependant on port options chosen; however, connecting plumbing may be
rated higher or lower than that of the swivel. The rated working pressure of a fluid power system should not exceed the lowest
•rated componentPthreoretine. ctive treatment meeting SAE standards
CAUTION:Installation Information:
Hydraulics, Inc. swivel joints are generally considered for low speed rotation as encountered in fluid power systems. Maximum
speed of rotation depends upon system environment, with fluid types and extreme conditions related to temperature and pressure
Do not attempt to disconnect and disassemble swivels under pressure.being of prime consideration. Questionable applications should be proven by laboratory or prototype testing. Contamination at
installation should be apvoriedesdsanudrceon.necDtinog plnumobtingasthtoeulmd npottcatuose ounpdueerloaatdeing.dTahemswaivgeleshdousldwnoitvbee ulssedaans adlodado not opera
bearing or structural member. Refer to Safety Information - aSelescetinlgeacndteUdsingsHwydirvaueliclss, Inrca. Stweivdel Jpoirnetss(psaguer3e) focr annot
exceed t
wear. Consider thatadditional information.
Options: Refer to page 3, Safety Information, Selecting and Using Hydraulics, Inc
Swivels shown in this catalog are considered standard to Hydraulics, Inc. For other requirements relative to pressure ratings, port
options, or sizes not shown in this catalog, please contact us. Optional seal materials are available.
Pressure Limitations:
Maximum working pressure for “HS” Series swivels is dependant on por
rated higher or lower than that of the swivel. The rated working pressu
rated component therein. I11
uacnnaddnendrooptRrneeeotuxsrtncsoteuoperSeedta.rrtatohtDfeeSoescltonwiowonIHivnteyesrsdlesttrmaardlauoliastlviipncteislgoaP,tHyhno:Iien0nfI8cgnts0.hwf0fesoluiFwvrsiIemdTiwvlTealibeIvNltaaeijGoorklrSineana2ln:tn4sdfHdrOoa/ooUmrRferSi.ostg’btseevnmsioeeurlweashcllybtileeecdaourpninnosdgriedtsre.reRdetufron rto lMoawin Insdpexeed rota
HYDRAULICS INC. HS SERIES
HIGH PRESSURE BSPP FEMALE / BSPP FEMALE STRAIGHT SWIVEL
BALL HOLE
PLUG
BARREL STEM
Part No Thread Body (Barrel) Thread Shaft (Stem) A (“) B (“) Working
HS6BF4-BF4 1/4” BSPPF 1/4” BSPPF 2.52 1.75 C (“) Pressure (Bar)
HS6BF6-BF6 3/8” BSPPF 3/8” BSPPF 2.52 1.75 1.00 345
HS8BF8-BF8 1/2” BSPPF 1/2” BSPPF 3.35 2.17 1.00 345
HS12BF12-BF12 3/4” BSPPF 3/4” BSPPF 3.51 2.42 1.25 345
HS16BF16-BF16 1” BSPPF 1” BSPPF 3.61 2.44 1.50 345
HS20BF20-BF20 1.1/4” BSPPF 1.1/4” BSPPF 3.96 2.60 1.75 275
HS24BF24-BF24 1.1/2” BSPPF 1.1/2” BSPPF 5.27 3.22 2.25 275
HS32BF32-BF32 2” BSPPF 2” BSPPF 6.07 4.30 2.75 275
3.50 206
HYDRAULICS INC. HS SERIES
HIGH PRESSURE
REPAIR KITS
Part No Swivel
HS6-1 Size
HS8-1 3/8”
HS12-1 1/2”
HS16-1 3/4”
HS20-1 1”
HS24-1 1.1/4”
HS32-1 1.1/2”
2”
PH: 0800 FITTINGS 24 HOURS. I12
Return to Start of Section Return to Main Index
S SERIES / IN-LINE 3000 PSI / FULL FLOW
STEM
BARREL
1 SYNTHETIC RUBBER O-RING
2 TEFLON BACK UP RING
3 RETAINER BALLS
4 DUST SEAL
5 BALL HOLE PLUG
HYDRAULICS, INC. Design Features
• Hardened carbon steel barrel and stem - Large wear • Burnished barrel bore - Extended seal life
• Optional seal material - Page 2
surface
• Protective treatment meeting SAE hose fitting standards • Low pressure drop - See in-line pressure drop chart -
• Chrome retainer balls - Long life
Page 27
• Fea••turLOeopswtornoatlagtiroenaasletofirtqtiuneg
sSetaanl dkaitrsd-OP-aRgienHg26aYnDd bRaAckUupLrIiCngS-,FiIeNldCrepDlaecesaibglen - see in-line torque chart - Page 27
- Page 26
• Hardened carbon MsAtLeEeJlICbTOaFrEreMAlLaEnPIdPEstem - Large wear surface
• Protective treatment meeting SAE hose fitting standards
• Chrome retainer balls - Long life
• Standard O-Ring and back up ring - Field replaceable seal kits
• Burnished barrel bore - Extended seal life
• Optional seal material
• Low pressure drop - See in-line pressure drop chart
• Low rotational torque - See in-line torque chart
• Optional grease fitting
PART NO. BARREL STEM CD
THREAD THREAD
A B HEX HEX
S6J6-PF4 9/16 - 18 1/4 - 18 2.67 1.77 1.00 1.00
S6J8-PF6 3/4 - 16 3/8 - 18 2.81 1.90 1.00 1.00
S8J10-PF8 7/8 - 14 1/2 - 14 3.14 2.00 1.25 1.25
S8J12-PF12 1 1/16 - 12 3/4 - 14 3.23 2.09 1.25 1.25
S16J16-PF16 1 5/16 - 12 1 - 11 1/2 3.75 2.58 1.75 1.62
S20J20-PF20 1 5/8 - 12 1 1/4 - 11 1/2 4.08 2.74 2.25 2.00
S24J24-PF24 1 7/8 - 12 1 1/2 - 11 1/2 4.82 3.12 2.75 2.37
4 S32J32-PF32 2 1/2 - 12 2 - 11 1/2 6.16 4.39 3.50 3.00
PH: 0800 FITTINGS 24 HOURS. I13
Return to Start of Section Return to Main Index
HYDRAULICS INC. S SERIES
3000 PSI JIC MALE / JIC FEMALE STRAIGHT SWIVEL
Working
Part No Thread Body (Barrel) Thread Shaft (Stem) A (“) B (“) C (“) D (“) Pressure (Bar)
S6J6-JF6
S6J8-JF8 9/16”-18 9/16”-18 2.37 1.77 1.00 1.00 206
S8J10-JF10
S8J12-JF12 3/4”-16 3/4”-16 2.56 1.90 1.00 1.00 206
S14J14-JF14
S16J16-JF16 7/8”-14 7/8”-14 2.78 2.00 1.25 1.25 206
S20J20-JF20
S24J24-JF24 1.1/16”-12 1.1/16”-12 2.89 2.09 1.25 1.25 206
S32J32-JF32
1.3/16”-12 1.3/16”-12 2.89 2.09 1.37 1.37 206
1.5/16”-12 1.5/16”-12 3.40 2.60 1.75 1.62 206
1.5/8”-12 1.5/8”-12 3.65 2.74 2.25 2.00 206
1.7/8”-12 1.7/8”-12 4.12 3.12 2.75 2.37 206
2.1/2”-12 2.1/2”-12 5.68 4.39 3.50 3.00 206
HYDRAULICS INC. S SERIES
3000 PSI NPT MALE / NPT FEMALE STRAIGHT SWIVEL
Working
Part No Thread Body (Barrel) Thread Shaft (Stem) A (“) B (“) C (“) D (“) Pressure (Bar)
S6PF4-P4 1/4”-18 1/4”-18 2.34 1.50 1.00 1.00 206
S6PF6-P6 3/8”-18 3/8”-18 2.34 1.50 1.00 1.00 206
S8PF8-P8 1/2”-14 1/2”-14 2.77 1.68 1.25 1.25 206
S8PF12-P12 3/4”-14 3/4”-14 2.89 2.68 1.25 1.25 206
S16PF16-P16 1”-11.5 1”-11.5 3.89 2.37 1.75 1.63 206
S20PF20-P20 1.1/4”-11.5 1.1/4”-11.5 4.35 2.60 2.25 2.00 206
S24PF24-P24 1.1/2”-11.5 1.1/2”-11.5 5.27 3.22 2.75 2.37 206
S32PF32-P32 2”-11.5 2”-11.5 6.87 4.30 3.50 3.00 206
PH: 0800 FITTINGS 24 HOURS. I14
Return to Start of Section Return to Main Index
HYDRAULICS INC. S SERIES
3000 PSI NPT FEMALE / NPT FEMALE STRAIGHT SWIVEL
Working
Part No Thread Body (Barrel) Thread Shaft (Stem) A (“) B (“) C (“) D (“) Pressure (Bar)
S6PF4-PF4 1/4”-18 1/4”-18 2.45 1.55 1.00 1.00 206
S6PF6-PF6 3/8”-18 3/8”-18 2.45 1.55 1.00 1.00 206
S8PF8-PF8 1/2”-14 1/2”-14 2.85 1.70 1.25 1.25 206
S8PF12-PF12 3/4”-14 3/4”-14 2.85 1.70 1.25 1.25 206
S16PF16-PF16 1”-11.5 1”-11.5 3.55 2.40 1.75 1.63 206
S20PF20-PF20 1.1/4”-11.5 1.1/4”-11.5 4.00 2.60 2.25 2.00 206
S24PF24-PF24 1.1/2”-11.5 1.1/2”-11.5 4.92 3.22 2.75 2.37 206
S32PF32-PF32 2”-11.5 2”-11.5 6.07 4.30 3.50 3.00 206
HYDRAULICS INC. S SERIES
REPAIR KITS
Part No Swivel
S6-1 Size
S8-1 3/8”
S12-1 1/2”
S16-1 3/4”
S20-1 1”
S24-1 1.1/4”
S32-1 1.1/2”
2”
PH: 0800 FITTINGS 24 HOURS. I15
Return to Start of Section Return to Main Index
9S SERIES / 90° 3000 PSI /PRESSURE BALANCED
BARREL
STEM
1 NON-LOAD BEARING RETAINING RING
2 SYNTHETIC RUBBER 0-RING (TWO)
3 TEFLON BACK UP RING (TWO)
4 DUST SEAL (TWO)
HYDRAULICS, INC. Design Features • Standard O-Ring and back up ring - Field replaceable
seal kits - Page 26
• Hardened carbon steel barrel - Large wear surface
• Barrel thread boss and stem annealed - Reduced • Optional seal material - Page 2
• Recessed and protected dust seals
breakage from shock and vibration • Pressure balanced for low rotational torque - See 90°
• Burnished barrel bore - Extended seal life
• Copper filled furnace braze joints torque chart - Page 27
• Heavy duty retainer ring • Excellent flow characteristics - See 90° pressure drop
• Protective treatment meeting SAE hose fitting
chart - Page 27
standards
HYDRAULICS, INC DesigMnALEFJeICaTtOuMrAeLsE JIC
• Hardened carbon steel barrel and stem - Large wear surface
• Barrel thread boss and stem annealed - Reduced breakage from
shock and vibration
• Burnished barrel bore - Extended seal life
• Copper filled furnace braze joints
• Heavy duty retainer ring
• Protective treatment meeting SAE hose fitting standards
PART•N OS. tandaBTHrAdRRERAOEDL-Ring TaHSRnTEEdMADback uA p ringB- Field CreplaceDableHsEHXe. al kiDtKIsA.
• 9S6J5-J5 Optiona1/2l -s2e0 al mat1e/2r-ia20l
2.50 1.65 1.80 1.17 .87 1.25
• 9S6J5-J6 Recess1e/2d- 20and pro9/1t6e-c18ted du2.5s0t sea1l.s65 1.80 1.17 .87 1.25
• 9S6J6-J5 Pressu9r/1e6 -b18alanced1/2f-o20r low r2.o50tation1.a65l torq1u.8e0 - Se1e.1790° t.8o7rque1c.25hart
• 9S6J6-J6 Excelle99//n1166t-- f11l88ow cha93/1/r46a--c1168hteris22t..i55c00 s S11e..6655e 90° 11p..88r11essu11r..e1188 drop..8877chart11..2255
-
9S6J6-J8
9S6J8-J8 3/4 - 16 3/4 - 16 2.50 1.65 1.91 1.28 .87 1.25
9S8J10-J10 7/8 - 14 7/8 - 14 2.83 1.99 2.26 1.50 1.00 1.50
9S12J12-J12 1 1/16 - 12 1 1/16 - 12 3.40 2.37 3.05 1.99 1.25 2.12
9S16J16-J16 1 5/16 - 12 1 5/16 - 12 3.82 2.70 3.36 2.18 1.62 2.37
9S20J20-J20 1 5/8 - 12 1 5/8 - 12 4.12 2.80 3.70 2.33 2.00 2.75
9S24J24-J24 1 7/8 - 12 1 7/8 - 12 5.27 3.51 4.65 2.90 2.37 3.50
9S32J32-J32 2 1/2 - 12 2 1/2 - 12 6.25 4.16 5.67 3.54 3.12 4.25 7
PH: 0800 FITTINGS 24 HOURS. I16
Return to Start of Section Return to Main Index
HYDRAULICS INC. 9S SERIES
3000 PSI JIC MALE / UNO MALE 90° SWIVEL
Part No Working
Thread Body (Barrel) Thread Shaft (Stem) A (“) B (“) C (“) D (“) H (“) K (“) Pressure (Bar)
9S6J5-O6 1/2”-20 9/16”-18 2.50 1.65 1.80 1.17 0.87 1.25 206
9S6J6-O6 9/16”-18 9/16”-18 2.50 1.65 1.81 1.18 0.87 1.25 206
9S6J6-O8 9/16”-18 3/4”-16 2.50 1.65 1.81 1.18 0.87 1.25 206
9S6J8-O8 3/4”-16 3/4”-16 2.50 1.65 1.91 1.28 0.87 1.25 206
9S8J10-O10 7/8”-14 7/8”-14 2.58 1.74 2.26 1.50 1.00 1.50 206
9S12J12-O12 1.1/16”-12 1.1/16”-12 3.24 2.21 3.05 1.99 1.25 2.12 206
9S16J16-O16 1.5/16”-12 1.5/16”-12 3.82 2.70 3.36 2.18 1.62 2.37 206
9S20J20-O20 1.5/8”-12 1.5/8”-12 3.76 2.44 3.70 2.33 2.00 2.75 206
9S24J24-O24 1.7/8”-12 1.7/8”-12 4.78 3.02 4.65 2.90 2.37 3.50 206
9S32J32-O32 2.1/2”-12 2.1/2”-12 5.50 3.41 5.67 3.54 3.12 4.25 206
HYDRAULICS INC. 9S SERIES
3000 PSI JIC MALE / NPT MALE 90° SWIVEL
Part No Working
Thread Body (Barrel) Thread Shaft (Stem) A (“) B (“) C (“) D (“) H (“) K (“) Pressure (Bar)
9S6J5-P4 1/2”-20 1/4”-18 2.50 1.65 1.80 1.17 0.87 1.25 206
9S6J5-P6 1/2”-20 3/8”-18 2.50 1.65 1.80 1.17 0.87 1.25 206
9S6J6-P4 9/16”-18 1/4”-18 2.50 1.65 1.81 1.18 0.87 1.25 206
9S6J6-P6 9/16”-18 3/8”-18 2.50 1.65 1.81 1.18 0.87 1.25 206
9S6J8-P6 3/4”-16 3/8”-18 2.50 1.65 1.91 1.28 0.87 1.25 206
9S8J8-P8 3/4”-16 1/2”-14 2.83 1.99 2.20 1.44 1.00 1.50 206
9S8J10-P8 7/8”-14 1/2”-14 2.83 1.99 2.26 1.50 1.00 1.50 206
9S12J12-P12 1.1/16”-12 3/4”-14 3.40 2.37 3.05 1.99 1.25 2.12 206
9S16J16-P16 1.5/16”-12 1”-11.5 3.82 2.70 3.36 2.18 1.62 2.37 206
9S20J20-P20 1.5/8”-12 1.1/4”-11.5 4.18 2.86 3.70 2.33 2.00 2.75 206
9S24J24-P24 1.7/8”-12 1.1/2”-11.5 5.32 3.55 4.65 2.90 2.37 3.50 206
9S32J32-P32 2.1/2”-12 2”-11.5 6.20 4.10 5.67 3.54 3.12 4.25 206
PH: 0800 FITTINGS 24 HOURS. I17
Return to Start of Section Return to Main Index
HYDRAULICS INC. 9S SERIES
3000 PSI NPT FEMALE / NPT FEMALE 90° SWIVEL
Working
Thread Body Thread Shaft Pressure
Part No (Barrel) (Stem) A (“) B (“) C (“) D (“) H (“) J (“) K (“) (Bar)
9S6PF4-PF4 1/4”-18 1/4”-18 2.50 1.65 2.00 1.37 0.87 0.75 1.25 206
9S6PF4-PF6 1/4”-18 3/8”-18 2.50 1.65 2.00 1.37 0.87 0.75 1.25 206
9S6PF6-PF4 3/8”-18 1/4”-18 2.50 1.65 2.00 1.37 0.87 0.87 1.25 206
9S6PF6-PF6 3/8”-18 3/8”-18 2.50 1.65 2.00 1.37 0.87 0.87 1.25 206
9S8PF8-PF8 1/2”-14 1/2”-14 2.62 1.78 2.59 1.84 1.00 1.00 1.50 206
9S12PF12-PF12 3/4”-14 3/4”-14 3.00 2.00 3.30 2.24 1.25 1.37 2.12 206
9S16PF16-PF16 1”-11.5 1”-11.5 3.40 2.28 3.64 2.46 1.62 1.62 2.37 206
9S20PF20-PF20 1.1/4”-11.5 1.1/4”-11.5 4.08 2.76 3.98 2.61 2.00 2.00 2.75 206
9S24PF24-PF24 1.1/2”-11.5 1.1/2”-11.5 4.89 3.12 5.20 3.45 2.37 2.37 3.50 206
9S32PF32-PF32 2”-11.5 2”-11.5 5.50 3.41 6.06 3.94 3.12 2.87 4.25 206
HYDRAULICS INC. 9S SERIES
REPAIR KITS
Part No Swivel
9S6-1 Size
9S8-1 3/8”
9S12-1 1/2”
9S16-1 3/4”
9S20-1 1”
9S24-1 1.1/4”
9S32-1 1.1/2”
2”
PH: 0800 FITTINGS 24 HOURS. I18
Return to Start of Section Return to Main Index
TECHNI-TURN STAINLESS STEEL
90° ROTARY ELBOW
SEAL TYPES
The standard unit comes with nitrile rubber seals , teflon back up washers and PETP bushes
to align the shaft. This combination is mainly suitable for cold water or hydraulic oil. If the
application involves chemicals or excessive temperatures then please see the basic application
seal material resistance chart listed below. If you are still unsure of correct seal type then
please contact our sales staff for advice. All units supplied with Viton or Ethylenepropylene
(EPR) seals are also supplied with Teflon bushes instead of the standard PETP bushes.
FLUID NITRILE VITON EPR
Acid - all types - - -
Air - up to 71deg C. E E E
Air - 71deg C. to 93deg C. G E E
Air - 93deg C. to 150deg C. U E G
Diesel Oil E E U
Gasoline E E U
Hydraulic Oil - up to 120deg C. E E U
Hydraulic Oil - 120deg C. to 230deg C. U E U
LPG E E U
Steam - up to 198deg C. U U C
Water - up to 93deg C. E E E
Water - 93deg C. to 176deg C. U U C
E = Excellent, G = Good, C = Conditional, U = Unsuitable, - = Consult Factory
For constant rotation applications i.e. cooling rollers, hydraulic clutches etc, roller bearings
should be used in place of the bushes.
Size : 1/4” – 3/4” Up to 20 RPM use Bushes – Over 20 RPM use Bearings.
Size : 1” – 1.1/2” Up to 10 RPM use Bushes – Over 10 RPM use Bearings.
Note : The above is indicative only. The bushes will not handle high revolutions as they wear
out very quickly which can cause the shaft to pick up on the inside of the body & then makes
the unit unrepairable. With the bearing unit the seals wear out but the shaft stays aligned by
the bearings and the seals can then be replaced at a much lower cost than replacing the whole
unit.
PH: 0800 FITTINGS 24 HOURS. I19
Return to Start of Section Return to Main Index
HIGH PRESSURE HYDRAULIC SWIVEL JOINTS
“S” Series/In-Line Swivel Joint
Sizes - ¼" through 2" pipe size
Connection types - JIC, pipe, SAE O-Ring face
seal (male & female)
Operating pressures - vacuum & to 3,000 PSI
Operating temperatures - 40° to 200° F
“9S” Series/90° Swivel Joint
Sizes - ¼" through 2" pipe size
Connection types - JIC & O-Ring (male), pipe
and SAE O-Ring face seal
(male & female) & pipe union
Operating pressures - vacuum & to 3,000 PSI
Operating temperatures - 40° to 200° F
“9SS” Series/Dual Plane Swivel Joint
Sizes - ¼" through 1¼" pipe size
Connection types - JIC & O-Ring (male), pipe & SAE
O-Ring face seal (male & female)
Operating Pressures - vacuum & to 3,000 PSI
Operating Temperatures - 40° to 200° F
“18S” Series/180° Swivel Joint
Sizes - ¼" through 2" pipe size
Connection types - JIC (male), pipe & SAE O-Ring
face seal (male & female) & pipe union
Operating pressures - vacuum & to 3,000 PSI
Operating temperatures - 40° to 200° F
PH: 0800 FITTINGS 24 HOURS. 3
Return to Start of Section I20
Return to Main Index
ROTATIONAL TORQUE AND PRESSURE DROP CHART
ROTATIONAL TORQUE vs PRESSURE - IN-LINE ROTATIONAL TORQUE vs PRESSURE - 90°
140 24 340 32
120 20 280
100 245 24
210
80 175 20
70 140
60 1000 2000 14 & 16 105 1000 2000 16
50 PRESSURE - PSIG PRESSURE - PSIG
40 8 70 12
30 6 60 8
20 3000 50
16 40 6
12 30 3000
20
8 10
4
0
0 0
PRESSURE DROP vs FLOW (GPM) - IN-LINE PRESSURE DROP vs FLOW (GPM) - 90°
80 80
60 60
40 40 6 24 32
30 30
20 6
20 8
8
10 10
6 6
4 12
4
24 2 16 20
2 14 1
1 16 .6
.4
.6
.4 .2
20
.2
.1 4 6 10 20 40 60 100 200 400 800 .1 2 4 6 10 20 40 60 100 200 400 800
12 FLOW RATE 1 FLOW RATE
• Pressure Drop Thru Swivel Based on Flows Giving • Pressure Drop Thru Swivel Based on Flows Giving
15 FPS Fluid Velocity Thru Nominal Bore Size 15 FPS Fluid Velocity Thru Nominal Bore Size
27
PH: 0800 FITTINGS 24 HOURS. I21
Return to Start of Section Return to Main Index
Return to Start of Section Return to Main Index
HIGH QUALITY PRODUCTS BLACK / GREYSCALE VERSIONF
F FLUIDEXCELFLEitNtiCnEgsIN SERVICE
If necessary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:
Spot:
SECTION JBlack - Pantone Black
Grey - Cool Grey 10
CMYK:
Grey Black RGB:
Quick ReleaMC::s00 e CouplingsC: 0 Red Black
M: 0 R: 75 R: 0
G: 0
Y: 0 Y: 0 G: 75 B: 0
K: 70 K: 100 B: 75
Poppet Type TABLE OF CONTENTS
Quick Release 103 SERIES
Couplers ISO-B CARBON STEEL
• Techni-Turn PBR Compatible Couplings Page J2
• QNV Series Poppet Couplers Page J3
• QNVB Series Ball Couplers Page J3
• QANV Series ISO A Couplers Page J4
• QBNV Series ISO B Couplers Page J5
• QPS Series Push/Pull Couplers Page J7
Flat Face Quick 131 SERIES
Release Couplers CPR
• QFF Series Flat Face Couplers Page J8
STANDARD MODELS
MALE
DN CH1 B ØF L DN ØA MALE FEMALE
Screw Together Quick 202 SERIES07 22 48 16,20 85,50 07 ¼” BSP 131.11111AB 131.12111AB 500Bar
Release Couplers 09 24 62,50 19,80 116,50 ¼” NPTF 131.11111BB 131.12111BB
13 27 62,50 ⅜” BSP 131.11112AC
15 36 70,50 ⅜” NPTF 131.11112BC 131.12112AC
½ ” BSP 131.11112AD
HPA17 45 82,50 ½ ” NPTF 131.11112BD
21 55 90
P242O,75P0PE1T3143V,25A0 LVE 131.12112BC
30 154 09 131.12112DC 350Bar
36 173 131.12112BD
30 70 111 57 215 ¾ ”-16ORB 131.11112GF 131.12112GF
45 75 125 73 ⅞ ”-14ORB 131.11112GH 131.12112GH
½” BSP 131.11113AD 131.12113AD
½” NPTF 131.11113BD 131.12113BD
• QVS Series Screw-together Couplers Page J913
¾” BSP 131.11113AE 131.12113AE 350Bar
¾” NPTF 131.11113BE 131.12113BE
⅞” - 14ORB 131.11113GH 131.12113GH
• Q321 Screw-together Flat Face Couplers Page J10ST15AND¾¾A””NRBPSDTPFMA11L33E11..11M111111O44ABDEEEL11S3311..1122111144ABEE 350Bar
1 1/16” 12ORB 131.11113GK 131.12113GK
• QPVV Screw-together Hydraulic Tool Couplers Page J11DN ØA1
1 1/16”-12ORB 131.11114GK 131.12114GK
REF17. 1” BSP 11E33/11C..1111111155ØABFFG 113311..11L221111155ABFFØF350BarL
1” NPTF
• 5TV Series Heavy Duty Screw-together Couplers Page J1206
1 5/16”-12ORB 131.11115GO 131.12115GO
¼” NPTF 202.1112411BB11¼¼1”2”N0BP0SBTPFar 13*1.11116A*G 131.12*116AG* 350Bar *
131.11116BG 131.12116BG
Water Blaster Quick 140 SERIES 45 2”BSP 10
⅜” NPTF 202.1113402BC11½½1”2”N0BP0SBTPFar 12341.1111137/1A6H” U11N33113..11822,81181177BA1HH8,93950B7a2r ,75
131.11117BH
131.11118AI 131.12118AI 250Bar
Release Couplers CVF STAINLESS STEEL MALE MODELS
FEMALE REF. E/C ØG L1 ØF L
DN ØA1
DN CH2 C ØD L
07 22 4806 ¼2”8NPT8F5,52002.21121BB 1200Bar * * ** *
• Q140 Series Waterblast Couplers Page J1409 27 64,5100 ⅜3”2NPT1F16,52002.21122BC 1200Bar 24 1 3/16” UN 42,50 18,99 72,75
13 32 80,50 38 134,50
Quick couplin15gs u3p6 on r7e8ques4t2and1s3u2 bjected to minimum quantities.
Nickel-pa12lt71ed p5455rodu912c0,5t50 a54d58d 011175134 at the end of the reference.
136SERIES30 65 132,50 80 215
Diagnostic Quick 45 80 165 100
Release Couplers DRF MALE (CARBON ST.)
DN ØA CH1 C ØF L REF.
STANDARD FEMALE MODELS
06 ¼” BSP 19 25 14,10 45,10 140.11001AB 700 Bar
28 REF18. ,90 48,50 1C4H0.211002LA2C 6Ø0E0 Bar L
23032.1212401,B40M 15250,05B0 ar 14*0.11003A* D 50*0 Bar *
• Q136 Series Diagnostic Couplers Page J1510 DN⅜” BSP ØA 22
13 06½” B¼S”PNPTF27M.
10 ⅜” NPTF M. 202.12142BN 1200Bar 22 45,50 34,50 72,75
120 SERIESDN ØA STANDARD MODELS
STAINLESS STEEL FEMALE MODELS
Trailer Brake NORMA REF. L L2 L3 CH1 ØD1
Couplers L
IFR 1/8” DNDPNITNF 235Ø3ASAE REF. CH2 L2 ØE
136.11110BL 74,8 40,8 * 17
1/4” N0DP6ITNF 3¼8” N5APN2TSIF/B1MB.2.S0.3P 2021.23261.12111B1M0BM1200Bar * 75 * 41 *
M141x10,5 ⅜” NIPSOTF61M49.-2 2021.23261.12121B1N0OF1200Bar 2274,545,5400,5 34,50 19
3/8” UNF 136.11110WA 72,8 38,8 72,75
7/16” UNF 136.11110WB 74,3 40,3 17
SAE J1926-2
• Q120 Series Trailer Brake Couplers Page J16DN 1/2” UNF 136.11110WC 70 36 19
*13
MA9/L16E” UNF • M13a6n.1u1fa11c0tWurDed accordin7g1 to 37ISO 5676 17/
9/16” UNF IISSOOC2LH8824423344--32FEM3BIMb5SaAaOsS11111leLe333/P33Ecw66666TEo.....i11111(CtC2dCh1111Ø1e92I11111A,pAD05311111lL01aR00000s0NYZYZZOBt.GDEiCBcFP(OMUCT4Nia5InO1Lp,i41mS6N120uT200Sm.B0)0:.aq56r1u44a3nn03777o.tR1i254Art2E,,,ymC8550:F21is.n15.cA0o344Bru810pn,,,855oitrsa)t7e10d70,,a7Bd5adr
CH1 C0H43 1C1/16” ØUFN E 12,6
32
24 D5N71/131/61”6”U2UN9NFØA 23 to
27 19
061/2” UN¼F” BSP
9/16” UNF
10 ⅜” BSP
J1M12x1,5
27 38 113366..1111311411S00TQYADE N48D,5A0 RD1M407.A152,L20E12MA4C1O,2DE6L0S0 Bar
ISO 9974-2
PH: 0800 FITTINGS 24 HOURS.13M14x1½,5” BSP 32 45 136.3191,150QF 55,50 140.12013AD 500 Bar
D1N36.1111Ø0AAL ØT 75 R41EF.
1/8” BSP 17
1/4” BSP DIN 3852-2 136.11M1108Ax1M,5 12L 120.11113JE 19
120.11113KFA
120.11113JG 150Bar
Return to Main IndexM20x1,5
13 M22x,15
Return to Start of Section • The nut is included in the Bulkhead version Ø13,5
15L
B½U”LBKSHPEMA. DS -
120.11113AO
DNMALEØA NORMA ½” BSP - 120.11113AD
REF. L L2 L3 CH1 ØD1
TECHNI-TURN STEEL PBR REPAIR KITS
PBR COMPATIBLE
Part No Size Description
A heavy duty New Zealand made quick release (“)
Coupling with case hardened male tip for extra PBR-08-O 1/2 O RING
durability. PBR-08-FRK 1/2 FEMALE BODY REPAIR KIT
PBR-08-MRK 1/2 MALE TIP REPAIR KIT
Part No Size Description Connection Working PBR-12-O 3/4 O RING
(“) Pressure PBR-12-T 3/4 TEFLON BACK UP
PBR-08FB (Bar) PBR-12-FRK 3/4 FEMALE BODY REPAIR KIT
PBR-08MT PBR-12-MRK 3/4 MALE TIP REPAIR KIT
PBR-12FB 1/2 1/2” FEMALE BODY 1/2” BSPPF 275 PBR-16-O 1 O RING
PBR-12MT PBR-16-T 1 TEFLON BACK UP
PBR-16FB 1/2 1/2” MALE TIP 1/2” BSPPF 275 PBR-16-FRK 1 FEMALE BODY REPAIR KIT
PBR-16MT PBR-16-MRK 1 MALE TIP REPAIR KIT
3/4 3/4” FEMALE BODY 3/4” BSPPF 275
3/4 3/4” MALE TIP 3/4” BSPPF 275
1 1” FEMALE BODY 1” BSPTF 275
1 1” MALE TIP 1” BSPTF 275
PBR DUST PLUGS & CAPS
Part No Size Description Material
(“)
PBR-12-DC Plastic
PBR-12-DP 3/4 DUST CAP Plastic
PBR-16-DC Plastic
PBR-16-DP 3/4 DUST PLUG Plastic
1 DUST CAP
1” DUST PLUG
PH: 0800 FITTINGS 24 HOURS. J2
Return to Start of Section Return to Main Index
STEEL QNV SERIES POPPET QNV SERIES
GENERAL PURPOSE DUST CAPS AND PLUGS
• Carbon Steel Part No Body Description Material
• Nitrile Seals Size (“)
• Poppet Valves QNV-DC04 1/4 Cap Plastic
QNV-DC06 3/8 Cap Plastic
Part No Body Description Connection Working QNV-DC08 1/2 Cap Plastic
Size (“) Pressure QNV-DC12 3/4 Cap Plastic
1/4” BSPPF (Bar) QNV-DC16 1 Cap Plastic
QNV-F04 1/4 Coupler 1/4” BSPPF 350 QNV-DP04 1/4 Plug Plastic
QNV-M04 1/4 Nipple 3/8” BSPPF 350 QNV-DP06 3/8 Plug Plastic
QNV-F06 3/8 Coupler 3/8” BSPPF 300 QNV-DP08 1/2 Plug Plastic
QNV-M06 3/8 Nipple 1/2” BSPPF 300 QNV-DP12 3/4 Plug Plastic
QNV-F08 1/2 Coupler 1/2” BSPPF 300 QNV-DP16 1 Plug Plastic
QNV-M08 1/2 Nipple 3/4” BSPPF 300
QNV-F12 3/4 Coupler 3/4” BSPPF 250
QNV-M12 3/4 Nipple 1” BSPPF 250
QNV-F16 1 Coupler 1” BSPPF 220
QNV-M16 1 Nipple 220
STEEL QNVB SERIES BALL TYPE Interchanges with:
GENERAL PURPOSE • Faster NV Series
• Aeroquip FD76 Series
• Carbon Steel • Parker 4000 Series
• Nitrile Seals • Snap-tite 60 Series
• Ball Type Valve
Part No Body Description Connection Working
Size (“) Pressure
1/4” BSPPF (Bar)
QNVB-F04 1/4 Coupler 1/4” BSPPF 350
QNVB-M04 1/4 Nipple 3/8” BSPPF 350
QNVB-F06 3/8 Coupler 3/8” BSPPF 300
QNVB-M06 3/8 Nipple 1/2” BSPPF 300
QNVB-F08 1/2 Coupler 1/2” BSPPF 300
QNVB-M08 1/2 Nipple 3/4” BSPPF 300
QNVB-F12 3/4 Coupler 3/4” BSPPF 250
QNVB-M12 3/4 Nipple 1” BSPPF 250
QNVB-F16 1 Coupler 1” BSPPF 220
QNVB-M16 1 Nipple 220
***NOTE** See Page J17 for technical details J3
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section
STEEL QANV SERIES ISO A
• Carbon Steel
• Conforms to ISO 7241-1 Series A
• Nitrile Seals
Part No Body Description Connection Working
Size (“) Pressure
(Bar)
QANV-F04 1/4 Coupler 1/4” BSPPF 350
QANV-M04 1/4 Nipple
QANV-F06 3/8 Coupler 1/4” BSPPF 350
QANV-M06 3/8 Nipple
QANV-F08 1/2 Coupler 3/8” BSPPF 300
QANV-M08 1/2 Nipple
QANV-F12 3/4 Coupler 3/8” BSPPF 300
QANV-M12 3/4 Nipple
QANV-F16 1 Coupler 1/2” BSPPF 300
QANV-M16 1 Nipple
QANV-F20 1.1/4 Coupler 1/2” BSPPF 300
QANV-M20 1.1/4 Nipple
QANV-F24 1.1/2 Coupler 3/4” BSPPF 250
QANV-M24 1.1/2 Nipple
QANV-F32 2 Coupler 3/4” BSPPF 250
QANV-M32 2 Nipple
1” BSPPF 230
1” BSPPF 230
1.1/4” BSPPF 230
1.1/4” BSPPF 230
1.1/2” BSPPF 200
1.1/2” BSPPF 200
2” BSPPF 130
2” BSPPF 130
QANV SERIES
DUST CAPS AND PLUGS
Part No Body Description Material
Size (“)
QANV-DC04 1/4 Cap Plastic
QANV-DC06 3/8 Cap Plastic
QANV-DC08 1/2 Cap Plastic
QANV-DC12 3/4 Cap Plastic
QANV-DC16 1 Cap Plastic
QANV-DP04 1/4 Plug Plastic
QANV-DP06 3/8 Plug Plastic
QANV-DP08 1/2 Plug Plastic
QANV-DP12 3/4 Plug Plastic
QANV-DP16 1 Plug Plastic
***NOTE** See Page J19 for technical details J4
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section
STEEL QBNV SERIES ISO B BRASS QBNVB SERIES ISO B
• Carbon Steel • Brass
• Conforms to ISO 7241-1 Series B • Conforms to ISO 7241-1 Series B
• Nitrile Seals • Viton Seals
Part No Body Description Connection Working Part No Body Description Connection Working
Size Pressure Size Pressure
QBNV-F04 (“) Coupler (Bar) QBNVB-F04 (“) Coupler (Bar)
QBNV-M04 1/4 Nipple QBNVB-M04 1/4 Nipple
QBNV-F06 1/4 Coupler 1/4” BSPPF 400 QBNVB-F06 1/4 Coupler 1/4” BSPPF 250
QBNV-M06 3/8 Nipple QBNVB-M06 3/8 Nipple
QBNV-F08 3/8 Coupler 1/4” BSPPF 400 QBNVB-F08 3/8 Coupler 1/4” BSPPF 250
QBNV-M08 1/2 Nipple QBNVB-M08 1/2 Nipple
QBNV-F12 1/2 Coupler 3/8” BSPPF 350 QBNVB-F12 1/2 Coupler 3/8” BSPPF 200
QBNV-M12 3/4 Nipple QBNVB-M12 3/4 Nipple
QBNV-F16 3/4 Coupler 3/8” BSPPF 350 QBNVB-F16 3/4 Coupler 3/8” BSPPF 200
QBNV-M16 1 Nipple QBNVB-M16 1 Nipple
QBNV-F20 1 Coupler 1/2” BSPPF 320 QBNVB-F20 1 Coupler 1/2” BSPPF 200
QBNV-M20 1.1/4 Nipple QBNVB-M20 1.1/4 Nipple
QBNV-F24 1.1/4 Coupler 1/2” BSPPF 320 QBNVB-F24 1.1/4 Coupler 1/2” BSPPF 200
QBNV-M24 1.1/2 Nipple QBNVB-M24 1.1/2 Nipple
QBNV-F32 1.1/2 Coupler 3/4” BSPPF 300 QBNVB-F32 1.1/2 Coupler 3/4” BSPPF 150
QBNV-M32 2 Nipple QBNVB-M32 2 Nipple
2 3/4” BSPPF 300 2 3/4” BSPPF 150
1” BSPPF 280 1” BSPPF 150
1” BSPPF 280 1” BSPPF 150
1.1/4” BSPPF 100 1.1/4” BSPPF 85
1.1/4” BSPPF 100 1.1/4” BSPPF 85
1.1/2” BSPPF 100 1.1/2” BSPPF 85
1.1/2” BSPPF 100 1.1/2” BSPPF 85
2” BSPPF 100 2” BSPPF 85
2” BSPPF 100 2” BSPPF 85
***NOTE** See Page J21 for technical details J5
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section
316 STAINLESS STEEL QBNV SERIES ISO B
• 316 Stainless Steel
• Conforms to ISO 7241-1 Series B
• Viton Seals
Part No Body Description Connection Working
Size Pressure
QBNVS-F04 (“) Coupler (Bar)
QBNVS-M04 1/4 Nipple
QBNVS-F06 1/4 Coupler 1/4” BSPPF 320
QBNVS-M06 3/8 Nipple
QBNVS-F08 3/8 Coupler 1/4” BSPPF 320
QBNVS-M08 1/2 Nipple
QBNVS-F12 1/2 Coupler 3/8” BSPPF 260
QBNVS-M12 3/4 Nipple
QBNVS-F16 3/4 Coupler 3/8” BSPPF 260
QBNVS-M16 1 Nipple
QBNVS-F20 1 Coupler 1/2” BSPPF 260
QBNVS-M20 1.1/4 Nipple
QBNVS-F24 1.1/4 Coupler 1/2” BSPPF 260
QBNVS-M24 1.1/2 Nipple
QBNVS-F32 1.1/2 Coupler 3/4” BSPPF 210
QBNVS-M32 2 Nipple
2 3/4” BSPPF 210
1” BSPPF 210
1” BSPPF 210
1.1/4” BSPPF 100
1.1/4” BSPPF 100
1.1/2” BSPPF 100
1.1/2” BSPPF 100
2” BSPPF 100
2” BSPPF 100
QBNV SERIES
DUST CAPS AND PLUGS
Part No Body Description Material
Size (“)
QBNV-DC02 1/8 Cap Plastic
QBNV-DC04 1/4 Cap Plastic
QBNV-DC06 3/8 Cap Plastic
QBNV-DC08 1/2 Cap Plastic
QBNV-DC12 3/4 Cap Plastic
QBNV-DC16 1 Cap Plastic
QBNV-DP02 1/8 Plug Plastic
QBNV-DP04 1/4 Plug Plastic
QBNV-DP06 3/8 Plug Plastic
QBNV-DP08 1/2 Plug Plastic
QBNV-DP12 3/4 Plug Plastic
QBNV-DP16 1 Plug Plastic
***NOTE** See Page J21 for technical details
PH: 0800 FITTINGS 24 HOURS. J6
Return to Start of Section Return to Main Index
STEEL QPS SERIES PUSH / PULL TYPE
• Carbon Steel
• Fits to ISO 7241-1 Series A 1/2” Male Tip
• Nitrile Seals
• Push/Pull Design Allows automatic release in
case of accidental pulls
Part No Body Description Connection Working
Size (“) Pressure
1/2” BSPPF (Bar)
QPS-F08 1/2 Coupler 3/4” BSPPF
QPS-F083/4BSP 1/2 Coupler 3/4” UNOF 250
QPS-F083/4UN 1/2 Coupler 3/8” BSPPF
QPS-F083/8BSP 1/2 Coupler 7/8” UNOF 250
QPS-F087/8UN 1/2 Coupler M18X1.5F
QPS-F08M18 1/2 Coupler M22X1.5F 250
QPS-F08M22 1/2 Coupler
250
250
250
250
PH: 0800 FITTINGS 24 HOURS. J7
Return to Start of Section Return to Main Index
STEEL QFF SERIES FLAT FACE 316 STAINLESS STEEL QFFS SERIES
FLAT FACE
• Carbon Steel
• Flat Face • 316 Stainless Steel
• Nitrile Seals • Flat Face
• Interchangeable with other • Viton Seals
• Interchangeable with other
couplers made to ISO 16028
couplers made to ISO 16028
Part No Body Description Connection Working Part No Body Description Connection Working
Size (“) Pressure Size (“) Pressure
1/4” BSPPF (Bar) 1/4” BSPPF (Bar)
QFF-F04 1/4 Coupler 1/4” BSPPF 500 QFFS-F04 1/4 Coupler 1/4” BSPPF 350
QFF-M04 1/4 Nipple 3/8” BSPPF 500 QFFS-M04 1/4 Nipple 3/8” BSPPF 350
QFF-F06 3/8 Coupler 3/8” BSPPF 350 QFFS-F06 3/8 Coupler 3/8” BSPPF 250
QFF-M06 3/8 Nipple 1/2” BSPPF 350 QFFS-M06 3/8 Nipple 1/2” BSPPF 250
QFF-F08 3/8 Coupler 1/2” BSPPF 350 QFFS-F08 3/8 Coupler 1/2” BSPPF 250
QFF-M08 3/8 Nipple 3/4” BSPPF 350 QFFS-M08 3/8 Nipple 3/4” BSPPF 250
QFF-F12 1/2 Coupler 3/4” BSPPF 350 QFFS-F12 1/2 Coupler 3/4” BSPPF 250
QFF-M12 1/2 Nipple 1” BSPPF 350 QFFS-M12 1/2 Nipple 1” BSPPF 250
QFF-F16 3/4 Coupler 1” BSPPF 350 QFFS-F16 3/4 Coupler 1” BSPPF 250
QFF-M16 3/4 Nipple 1.1/4” BSPPF 350 QFFS-M16 3/4 Nipple 1.1/4” BSPPF 250
QFF-F20 1 Coupler 1.1/4” BSPPF 350 QFFS-F20 1 Coupler 1.1/4” BSPPF 250
QFF-M20 1 Nipple 1.1/2” BSPPF 350 QFFS-M20 1 Nipple 250
QFF-F24 1.1/4 Coupler 1.1/2” BSPPF 350
QFF-M24 1.1/4 Nipple 2” BSPPF 350 QFF SERIES DUST CAPS
QFF-F32 1.1/2 Coupler 2” BSPPF 250
QFF-M32 1.1/2 Nipple 250
Part No Body Description Material
Size (“)
QFF-PCC04 1/4 Coupler Cap Plastic
QFF-PCC06 3/8 Coupler Cap Plastic
QFF-PCC08 1/2 Coupler Cap Plastic
QFF-PCC12 3/4 Coupler Cap Plastic
QFF-PCC16 1 Coupler Cap Plastic
QFF-PNC04 1/4 Nipple Cap Plastic
QFF-PNC06 3/8 Nipple Cap Plastic
QFF-PNC08 1/2 Nipple Cap Plastic
QFF-PNC12 3/4 Nipple Cap Plastic
QFF-PNC16 1 Nipple Cap Plastic
***NOTE** See Page J23 for technical details J8
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section
STEEL QVS SERIES SCREW TOGETHER 316 STAINLESS STEEL QVS SERIES
SCREW TOGETHER
• Carbon Steel
• Screw together connection • 316 Stainless Steel
• Nitrile Seals • Screw together connection
• Viton Seals
Part No Body Description Connection Working Part No Body Description Connection Working
Size (“) Pressure Size (“) Pressure
QVS-F04 Coupler 1/4” BSPPF (Bar) QVSS-F04 Coupler 1/4” BSPPF (Bar)
QVS-M04 1/4 Nipple 1/4” BSPPF 950 QVSS-M04 1/4 Nipple 1/4” BSPPF 950
QVS-F06 1/4 Coupler 3/8” BSPPF 950 QVSS-F06 1/4 Coupler 3/8” BSPPF 950
QVS-M06 3/8 Nipple 3/8” BSPPF 750 QVSS-M06 3/8 Nipple 3/8” BSPPF 750
QVS-F08 3/8 Coupler 1/2” BSPPF 750 QVSS-F08 3/8 Coupler 1/2” BSPPF 750
QVS-M08 1/2 Nipple 1/2” BSPPF 750 QVSS-M08 1/2 Nipple 1/2” BSPPF 750
QVS-F12 1/2 Coupler 3/4” BSPPF 750 QVSS-F12 1/2 Coupler 3/4” BSPPF 750
QVS-M12 3/4 Nipple 3/4” BSPPF 650 QVSS-M12 3/4 Nipple 3/4” BSPPF 650
QVS-F16 3/4 Coupler 1” BSPPF 650 QVSS-F16 3/4 Coupler 1” BSPPF 650
QVS-M16 1 Nipple 1” BSPPF 450 QVSS-M16 1 Nipple 1” BSPPF 450
QVS-F20 1 Nipple 1.1/4” BSPPF 450 QVSS-F20 1 Nipple 1.1/4” BSPPF 450
QVS-M20 1.1/4 Nipple 1.1/4” BSPPF 450 QVSS-M20 1.1/4 Nipple 1.1/4” BSPPF 450
QVS-F24 1.1/4 Nipple 1.1/2” BSPPF 450 QVSS-F24 1.1/4 Nipple 1.1/2” BSPPF 450
QVS-M24 1.1/2 Nipple 1.1/2” BSPPF 300 QVSS-M24 1.1/2 Nipple 1.1/2” BSPPF 300
QVS-F32 1.1/2 Nipple 2” BSPPF 300 QVSS-F32 1.1/2 Nipple 2” BSPPF 300
QVS-M32 2 Nipple 2” BSPPF 300 QVSS-M32 2 Nipple 2” BSPPF 300
2 300 2 300
QVS SERIES SCREW TOGETHER
DUST CAPS AND PLUGS
Part No Body Description Material
Size (“)
QVS-DC04 1/4 Cap Steel
QVS-DC06 3/8 Cap Steel
QVS-DC08 1/2 Cap Steel
QVS-DC12 3/4 Cap Steel
QVS-DC16 1 Cap Steel
QVS-DP04 1/4 Plug Steel
QVS-DP06 3/8 Plug Steel
QVS-DP08 1/2 Plug Steel
QVS-DP12 3/4 Plug Steel
QVS-DP16 1 Plug Steel
***NOTE** See Page J25 for technical details J9
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section
STEEL Q231 SERIES SCREW TOGETHER FLAT FACE COUPLER
• Carbon Steel
• Screw together connection
• Nitrile Seals
• Interchangeable with Stucchi VEP Series
Part No Body Connection Working
Size (“) Pressure
Q231-F08RP 1/2” BSPPF (Bar)
Q231-M08RP 1/2 1/2” BSPPF
Q231-F12RP 1/2 3/4” BSPPF 550
Q231-M12RP 3/4 3/4” BSPPF
Q231-F16RP 3/4 1” BSPPF 550
Q231-M16RP 1 1” BSPPF
Q231-F20RP 1 1.1/4” BSPPF 550
Q231-M20RP 1.1/4 1.1/4” BSPPF
1.1/4 550
500
500
470
470
Q231 SERIES SCREW TOGETHER
DUST CAPS AND PLUGS
Part No Body Description Material
Size (“)
Q231-DC08 1/2 Cap Aluminium
Q231-DC12 3/4 Cap Aluminium
Q231-DC16 1 Cap Aluminium
Q231-DC20 1.1/4 Cap Aluminium
Q231-DP08 1/2 Plug Aluminium
Q231-DP12 3/4 Plug Aluminium
Q231-DP16 1 Plug Aluminium
Q231-DP20 1.1/4 Plug Aluminium
***NOTE** See Page J27 for technical details J10
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section
202 SERIES
HPA
POPPET VALVE
STEEL QPVV SERIES SCREW TOGETHER STANDAR
FOR HYDRAULIC TOOLING
DN ØA1 REF.
• Carbon Steel
• Screw together connection 06 ¼” NPTF 202.11141BB 120
• Nitrile Seals 10 ⅜” NPTF 202.11142BC 120
STAINLESS S
Part No Body Description Connection Working
Size (“) Pressure
(Bar) DN ØA1 REF.
1200
QPVV-F04F 1/4 Coupler 1/4” NPTF 1200 06 ¼” NPTF 202.21121BB 120
QPVV-F04RP 1/4 Coupler 1/4” BSPPF 1200 10 ⅜” NPTF 202.21122BC 120
QPVV-M04F 1/4 Nipple 1/4” NPTF 1200
QPVV-M04RP 1/4 Nipple 1/4” BSPPF 1200 STANDARD
QPVV-F06F 3/8 Coupler 3/8” NPTF 1200
QPVV-F06M 3/8 Coupler 3/8” NPT 1200
QPVV-F06RP 3/8 Coupler 3/8” BSPPF 1200
QPVV-M06F 3/8 Nipple 3/8” NPTF 1200
QPVV-M06RP 3/8 Nipple 3/8” BSPPF
DN ØA REF.
QPVV SERIES SCREW TOGETHER 06 ¼” NPTF M. 202.12141B
DUST CAPS AND PLUGS 10 ⅜” NPTF M. 202.12142B
Part No Body Description Material STAINLESS ST
Size (“)
QPVV-MDC04 Cap Steel DN ØA REF.
QPVV-MDC06 1/4 Cap Steel
QPVV-MDP04 Plug Steel 06 ¼” NPTF M. 202.22121B
QPVV-MDP06 3/8 Plug Steel 10 ⅜” NPTF M. 202.22122B
1/4
3/8
Interchanges with:
• Parker 3000 Series
• Faster PVVM Series
• Perfecting 300 Series
• Powerstream C38 Series
• Enerpac C-604
• Porta-Power
***NOTE** See Page J29 for technical details
PH: 0800 FITTINGS 24 HOURS. J11
Return to Start of Section Return to Main Index
STEEL 5TV SCREW-TOGETHER
• Carbon Steel
• Rugged Construction
• 345 bar working pressure - all sizes
• 1380 bar burst pressure - all sizes
• Acme thread
• High flow rate
BSPP FEMALE THREAD
Part No Body Description
Size (“)
5TV-C-12BF 3/4 Coupler
5TV-N-12BF 3/4 Nipple
5TV-C-16BF 1 Coupler
5TV-N-16BF 1 Nipple
5TV-C-20BF 1.1/4 Coupler
5TV-N-20BF 1.1/4 Nipple
5TV-C-24BF 1.1/2 Coupler
5TV-N-24BF 1.1/2 Nipple
5TV-C-32BF 2 Coupler
5TV-N-32BF 2 Nipple
NPT FEMALE THREAD
Part No Body Description
Size (“)
5TV-C-12 3/4 Coupler
5TV-N-12 3/4 Nipple
5TV-C-16 1 Coupler
5TV-N-16 1 Nipple
5TV-C-20 1.1/4 Coupler
5TV-N-20 1.1/4 Nipple
5TV-C-24 1.1/2 Coupler
5TV-N-24 1.1/2 Nipple
5TV-C-32 2 Coupler
5TV-N-32 2 Nipple
***NOTE** See Page J30 for technical details J12
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section
5TV SERIES DUST CAPS AND PLUGS
Part No Body Description
Size (“)
5TV-DC-12 3/4 Coupler
5TV-DP-12 3/4 Nipple
5TV-DC-16 1 Coupler
5TV-DP-16 1 Nipple
5TV-DC-20 1.1/4 Coupler
5TV-DP-20 1.1/4 Nipple
5TV-DC-24 1.1/2 Coupler
5TV-DP-24 1.1/2 Nipple
5TV-DC-32 2 Coupler
5TV-DP-32 2 Nipple
***NOTE** See Page J30 for technical details J13
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section
140 SERIES
CVF
STEEL 140 SERIES WATER BLAST Quick couplings upon request and subjected to m
Nickel-palted product add 011 at the end
• Nickel Plated Carbon Steel MALE (CA
• Free flow, No Poppet Valves
• High Pressure Ratings DN ØA CH1 CØ
• For use with water blasters 25 14
28 18
Part No Body Description Connection Working 06 ¼” BSP 19 33 20
Size (“) Pressure 10 ⅜” BSP 22
(Bar) 13 ½” BSP 27
Q140-F04RP 1/4 Coupler 1/4” BSPPF 700
Q140-M04RP 1/4 Nipple 1/4” BSPPF
Q140-F06RP 3/8 Coupler 3/8” BSPPF 700
Q140-M06RP 3/8 Nipple 3/8” BSPPF
Q140-F08RP 1/2 Coupler 1/2” BSPPF 600
Q140-M08RP 1/2 Nipple 1/2” BSPPF
600
500
500
316 STAINLESS STEEL 140 SERIES FEMALE (C
WATER BLAST
DN ØA CH2 B Ø
• 316 Stainless Steel
• Free flow, No Poppet Valves 06 ¼” BSP 22 35 29
• High Pressure Ratings
• For use with water blasters 10 ⅜” BSP 27 38 3
13 ½” BSP 32 45 39
Part No Body Description Connection Working
Size (“) Pressure
Q140S-F04RP (Bar)
Q140S-M04RP 1/4 Coupler 1/4” BSPPF
Q140S-F06RP 300
Q140S-M06RP 1/4 Nipple 1/4” BSPPF
Q140S-F08RP 300
Q140S-M08RP 3/8 Coupler 3/8” BSPPF
280
3/8 Nipple 3/8” BSPPF
280
1/2 Coupler 1/2” BSPPF
250
1/2 Nipple 1/2” BSPPF
250
***NOTE** See Page J32 for technical details J14
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section
136SERIES
DRF
STEEL 136 SERIES DIAGNOSTIC STAND
• In accordance with ISO15171-1 and SAEJ1502 DN ØA NORMA RE
• Diagnostic Coupling
• Minimal air inclusion and spillage 1/8” NPTF ANSI B1.20.3 136.111
1/4” NPTF ISO 6149-2 136.111
Part No Body Description Connection Working M14x1,5 SAE J1926-2 136.111
Size (“) Pressure 3/8” UNF 136.111
Q136-F04F Coupler 1/4” NPTF (Bar) 7/16” UNF ISO 8434-3 136.111
Q136-M7/16M 1/8 Nipple 7/16” UNOM 1/2” UNF 136.111
Q136-M9/16M 1/8 Nipple 9/16” UNOM 420 9/16” UNF ISO 8434-2 136.111
Q136-M04F 1/8 Nipple 1/4” NPTF 9/16” UNF ISO 9974-2 136.111
1/8 420 DIN 3852-2 136.111
04 11/16” UN 136.111
420 136.111
13/16” UN 136.111
420 7/16” UNF 136.111
1/2” UNF 136.111
9/16” UNF 136.11
M12x1,5 136.111
M14x1,5 136.111
1/8” BSP
1/4” BSP
DN ØA NORMA BUL
9/16” UNF ISO 8434-3 RE
11/16” UN 136.111
13/16” UN ISO 8434-2 136.111
136.111
04 136.111
136.111
7/16” UNF 136.111
1/2” UNF
9/16” UNF
Manufactured according to ISO 15171-1, size DN04 under ISO 7241-2 specificat
DUST CAP – 136.5450AA
***NOTE** See Page J33 for technical details J15
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section
120 SERIES
IFR
DIN 2353 SAE
DIN 3852 / BSP
STEEL 120 SERIES TRAILER BRAKE MALE • Manufactu
ISO/TC23 N
• Agricultural Trailer Brake Coupling DN CH1 CH3 C ØF E L
• Compatible with Faster VF and Gromelle Q-9000 SPECIAL
13 32 24 51 29 23 *
27 Male with plas
base code 010
Part No Body Description Connection Working • The nut is included in the Bulkhead version
Size (“) Pressure ST
Q120-F06RP (Bar)
Q120-F08RP MALE DN Ø
Q120-M08RP 150
DN CH1 C ØF E M18x
150 13 32 43 29 15 M20x
13 M22x
150 ½” BS
½” B
1/2 Coupler 3/8” BSPPF
1/2 Coupler 1/2” BSPPF L
1/2 Nipple 1/2” BSPPF *
MALE
DN CH1 CH2 C ØF E L
13 32 24 51 29 31 *
27
FEMALE STA
DN CH2 B ØD L DN
13 27 57 45
* 13 M
M
• Metal parking parts is included in all female parts
***NOTE** See Page J36 for technical details J16
PH: 0800 FITTINGS 24 HOURS.
Return to Main Index
Return to Start of Section
INTE11DDVA 00QIINNNV44SERSSIEEES RRIIEESS 104 SERIES
DIN
MALE
DN CH1 C ØF
06 19 36 14,20
10 24 40,50 18,95
Size (DNM) ASLizEe (“) CH1 (mm) C (mm) STFA(NmmD)ARLD(mMm1)3ODE2L7 S (P4O6 PPET)
48 20,56
STANDARD MODE3L0S (P5O0 PPET)
DN C6H1 MCAL1/E4 ØF 19.00L D3N6.00 ØA14.20 1100874412MM....1100AA11002211LL0511EE11BABB3461 F5E6MALE27,95
D046N0.50 ¼¼””ØNBA1PS8TP.9F5 10F46E.13M21A1L1EA3B1,30
D0N6 C121H0491 3C6 3/81148Ø,,F290524.0078L21 104.12111AB 350B
10 40,50
06 11223947 3466 31//24112408,,,2950653276..88890077910078,,,,2155550000 46.090/1¼6”” 1B28S0OP.5R6B 11008447...115110111111GABC 110044..1122111111GABC
1103 223070 404,850 105066.090/1¼⅜⅜6””””NN1B2PP8S7OTT.P9FFR5B 11110000144441....21111.111101111011111221GABBCCBC 110044..1122111121AACB 350B
23435016 11001412..611.1101101123AACD 110044..1122111112GBCC 300B
1230 4560 110041..1111111123BBCD
25 4586 223017,,,59360541.8901191021,,552600 110011..1111111133AGDF
20 5603 1 116033.00¾⅜½”⅜½½-”””””1NNBBB63PPSSSO1TTPPP.R3FF0B 110011..1111111133GBDH 110041..1122111123AACD 300B
25 110014..1111111134GAEF 110041..1122111123BBCD 300B
36 56 27,95 112 110014..1111111134GBEH 110011..1122111133AGDF
41 63 31,30 126 13 ⅞½”-” 1N4POTRFB 110011..1122111133GBDH 300B
20 ¾”¾-”1B6SOPRB 110014..1122111134GAEF 250B
⅞¾”-” 1N4POTRFB 110014..1122111134GBEH
¾1”” BBSSPP 110044..1111111145AAEF 110044..1122111145AAEF
2250 ¾1”” NNPPTTFF 110044..1111111145BBEF 110044..1122111145BBEF 222500BB
Manufactured according25to IS11O””NB5PS6TP7F 5 no11r00m44..1111111155BAFF 104.12115AF 220B
104.12115BF
FEMALE
Manufactured according to ISO 5675 norm DN CH2 B ØD
Manufactured according to ISO 5675 norm
06 22 53,50 27
DN
D0N6 10 27 61 35
10
06 FEMALE STANDARD MODELS (BALL)
1130
2130 13 30 63,50 38
25 Size (FDENM)B ASiLzeE(“Ø) D CH2 (mm) B (mm) SDT(AmNm)DALR(DmmM) ODELS (BALL)
20 CH2 L
25 DN ØA MA2L0E 38 FE8M5ALE 48
C622H722 536B,1501/4 Ø27D 22.0870L12 D056N3.50 ¼¼””ØNBA2PS7TP.0F0 11007442M...110A110222L511E11BABB46 10F49E.61M,252A01L1EAB55
35 104.12211AB 350B
1202 53,503/8 27 27.80770,250
132307 636,1501/2 3385 30988.091780,,,1555000 61.090/1¼6”” 1B38S5OP.0R0B 11008441...110110221111GABC 110044..1122221111GABC
106063.590/1¼⅜⅜6””””NN1B3PP8S8OTTP.FF0R0B 11110000844447.....1111511110222211111221GABBCCBC 110044..1122221121AACB 350B
110044..1122221112GBCC 300B
233080 638,5503/4 3488 3889.01119012,,556200 11980356..0500¾⅜½”⅜½½-”””””1NNBBB654PPSSSO58TTPPP..RFF00B00 11001411..211.1102201123AACD 110041..1122221123AACD 300B
46 96,50 55 11110000141112....61111.111102222011112333BABGCDDF 110041..1122221123BBCD 300B
2358 851 48 46.01012 110011..1122221133AGDF
46 96,50 55 126 13 ⅞½”-” 1N4POTRFB 110011..1111221133GBDH 110011..1122221133GBDH 300B
20 ¾”¾-”1B6SOPRB 110014..1111221134GAEF 110014..1122221134GAEF 250B
⅞¾”-” 1N4POTRFB 110014..1111221134GBEH 110014..1122221134GBEH
¾1”” BBSSPP 110044..1111221145AAEF 110044..1122221145AAEF
2250 ¾1”” NNPPTTFF 110044..1111221145BBEF 110044..1122221145BBEF 222500BB
Manufactured according25to IS1O” B5S6P75 no1r0m4.11215AF 104.12215AF 220B
104.12215BF
1” NPTF 104.11215BF
Manufactured according to ISO 5675 norm
Manufactured according to ISO 5675 norm
PH: 0800 FITTINGS 24 HOURS. J17
Return to Start of Section Return to Main Index
104 SERIES 104 SERIES
DIN DIN
INTEVA QNV SERIES
MALE
DN CH1 C ØF
14,20
06 19 36 18,95
10 24 40,50 20,56
13 27 46 27,95
48 31,30
30 50
20 36 56
25 41 63
Manufactured according to ISO 5675 norm
FEMALE
DN CH2 B ØD
27
06 22 53,50 35
10 27 61
38
13 30 63,50
48
20 38 85 55
25 46 96,50
Manufactured according to ISO 5675 norm
PH: 0800 FITTINGS 24 HOURS. J18
Return to Start of Section Return to Main Index
INTEVA1I1ISSQ0A0OONV11--SAAERSSIESEERRIIEESS 101 SERIE
ISO-A
MALE
DN CH1 L1 ØF
MALE STAN10D06ARD2129MO4D03,E65L0 S 11,80 7
17,25 8
DN CSHiz1e (DMNL)A1 LSiEze (“Ø) F CH1 L(mm) L1D(Nmm) FØ(AmmS) TALN(m1DMm3AA) LRED2370MOD4E6FELMSA2L0E,56 87
20 36 56 29 1
D0106N C126H921 403L,61501/4 1117Ø,,28F0519.0870L21 36D0.06N0 ¼¼””1ØN1BPA.S8T0PF 711200.11230..M5201111A11L11E451110BABB 1603F1.E1M21A13L14EA,3B0 3511
17051.1211414B,9B5
110306 2312107029 4043,6503/8 211017,,,582605228.07780,2150
400.560 ⅜¼⅜¼””1N7B.PS2T5PF 8111110000.1101154....0001111111111111111227611AB50BACCBB 811300,115..11221111215AA5CB 330512
221503 312367 546 1/2 43244022,,,99350563276.8.011107012501,560220 461.000 ⅜⅜”2”B0BS.S5P6PT 1100115..112211116215BB,1CB0
3220 5423310060 63 3/4 811700.151.0.1111111122DAC
7556 111110002111...0.11101111111112322GADBDCC 110011..1122111122DAC
561.000 9/1⅜⅜½6””””2BN1B9S8P.S0OPTP0FTRB 110011..1122111122GBC 30
101.121132ADDC
4205 624051 8633,51 345,53041.0106276 63.00 9/½16””3N14P8.3TO0FRB 112061..01011132BGDC 101.121132BGDC
5302 7550 17055 6454,1905 21150 751.030 ¾½M”½-2”4”12N4B6xP.SO19T,5PR5FB 111150000111....01110111111111333NGABGDDF 110011..1122111133NAGD 30
40 3620 83,51.1/4 55 50.01067 101.12113GBDF
50 4705 1051.1/265,1060.02010 831.530 ⅞M” 215245xO.01R0,5B 116071..0101113GNHG 101.12113GNHG 30
¾”¾-”1B6SOPRB 101.111143AGEF 101.121143AGEF
50 MILS=Oalne5un26fga7hc5ttuwrreheqidlue7i5arq.ce0ucm0icoekrndctinosgu. p1tl0oi32222n520550g.I0Si0Os1⅞1c¾¾1171111111¾¼1o””¼””22”222””n511615””NNOONOON”B4//Bn45//BN11P11PBPRRPSRRO.eS1S166P66TTSTcBBTPBB0P-””R””PTFAF--tF--PFBFedn.or21111111111111m1000000000000001111,111111111..........0D....1111111111111011111N11111111111111111111111111111111111356645435544455GBAGGBGBAGBABAsGGOEFFKOEEHFFKize 1111m1111111110000000000000e1111111111111e.............111111111t11112s2222222222221111111111111a1111111111111s54665435544455GGBAGBGBAGBABAwGGOEFFKOEEFHFKell2222253335
Manufactured according to ISO 7241-A norm, DN13 size meets as well 4302 1 ½¼” BSP 101.111176AHG 101.121176AHG 203
ISO 5675 requirements. 1 ½¼” NPTF 101.111176BHG 101.121176BHG
Manufactured according to ISO 7241-A norm, DN13 size meets as well
LIS=Ole5n6g7ht5wrehqileuiqreumickenctosu. pling is connected. 540 12½” B” BSSPP 111100001111....11111111111111117788ABBAHHII FE1111M00001111A....1111L2222E111111117788ABBAHHII 1230
12½” N” NPPTFTF
L= lenght while quick coupling is connected.
50 2” BSP 101.11118AI 101.12118AI 13
2” NPTF 10D1N.111C18HB2I 1L021.1211Ø8BDI
Size F(DENM) ASLizeE(“) CH2 (mm) L2 (mm) D (mm) 06 19 51 26 7
L (m1m0 )
DN C6H2 FEML2A1L/4E ØD 19.0L0 51.00 26.00 24 58,50 32 8
D1060N C112H0942 585L,12503/8 Ø2362D 24.0780L21 58.50 32.00 13
63.50 38.00 20 30 63,50 38 87
1036 131309 635,1501/2 3286 308.0770,250 83.50 46.00 72.0205 38 83,50 46 1
97.00 55.00 81.043002 46 55 1
117.00 70.00 87.5500 50 97 70 1
133.00 84.50 60 117 84,50 1
165.00 100.00 112.00 75 133 100 2
165
126.00
210 2342308640 8563839,,755003/4 4362 388.11078210,15620
2153 5358 150.00
3220 253508 8131,5710 7406 46.1050102 167.00
4205 6406 19373 845,50 16276
5302 375250 161571.1/4 17000 50.2011050 210.00
40 467050 1163531.1/2 8140,50060.01206170
50
50 2 75.00
Manufactured according to ISO 7241-A norm, DN13 size meets as well
ISO 5675 requirements
L= lenght while quick coupling is connected.
Manufactured according to ISO 7241-A norm, DN13 size meets as well J19
ISO 5675 requirements
Manufactured according to ISO 7241-A norm, DN13 size meets as well Return to Main Index
LIS=Ole5n6g7ht5wrehqileuiqreumickenctosupling is connected.
L= lenght while quick coupling is connected.
PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section
101 SERIES 101 SERIE
ISO-A ISO-A
INTEVA QANV SERIES
MALE
DN CH1 L1 ØF
06 19 36 11,80 7
40,50 17,25 8
10 22
46
13 27 20,56 87
30 56
63
20 36 75 29 1
83,5 34,30 1
25 41 105 44,95 1
1
32 50 55 2
65,10
40 60
50 75
Manufactured according to ISO 7241-A norm, DN13 size meets as well
ISO 5675 requirements.
L= lenght while quick coupling is connected.
FEMALE
DN CH2 L2 ØD
06 19 51 26 7
10 24 58,50 32 8
13 30 63,50 38 87
20 38 83,50 46 1
25 46 55 1
32 50 97 70 1
40 60 117 84,50 1
50 75 133 100 2
165
Manufactured according to ISO 7241-A norm, DN13 size meets as well
ISO 5675 requirements
L= lenght while quick coupling is connected.
PH: 0800 FITTINGS 24 HOURS. J20
Return to Start of Section Return to Main Index
103 SERIES 103 SERIE
ISO-B CARBON STEEL / ISO-B CARBON S
AISI 316 AISI 316
INTEVA QBNV SERIES
MALE
MALE STANDARD CARBON STEDENL MCHO1DELLS1 ØF
DN CH1 L1 ØF L DN ØA MALE 04 14 30 10,90
0F6EMA1L9E 36 14,20
60 103.11110AA
04 14 30 10,90 72 04 ⅛” BSP 103.11110BA 11111122000030053333....1111222211112234111147161010BBAABABA403465,806365000BBaarr12339731,,,,18540550
06 19 36 14,20 81 ⅛” NPTF 103.11111AB
10 24 40,50 19,10 92 103.11111BB
13 27 46 23,55 112 06 ¼” BSP 103.11112AC
20 36 56 31,45 126 ¼” NPTF 103.11112BC
25 41 63 37,80 103.11112GF
⅜” BSP 103.11113AD 103.12112AC
103.11113BD
10 ⅜” NPTF 103.11113GF 103.12112BC 350Bar
103.11113GH
¾”-16ORB 103.11114AE 103.12112GF
103.11114BE
½” BSP 103.12113AD
103.11114GK
13 ½” NPTF 103.12113BD 320Bar
¾” - 16ORB 103.11115AF 103.12113GF
103.11115BF
⅞” 14ORB 103.12113GH
103.11115GO
¾” BSP 103.12114AE
20 ¾” NPTF 103.12114BE 300Bar
1 1/16”-
103.12114GK
12ORB
1” BSP 103.12115AF
103.12115BF 280Bar
25 1” NPTF 103.12115GO
1 5/16”-
12ORB
FEMALE
FEMALE STANDARD AISI 316DMN ODCHE2LS L2 ØD
04 14 49 22
DN ØA MALE 0F6EMA1L9E 57,70 27
DN CH2 L2 ØD L
04 ⅛” BSP 103.21120AA 11112211000005303333....2222222211114232222216741010BBAABABA 65,50 35
04 14 49 22 60 ⅛” NPTF 103.21120BA 37240Bar
06 19 57,70 27 72 103.21121AB 90 42
10 24 65,50 35 81 06 ¼” BSP 103.21121BB 218003Bar 52
13 27 42 92 ¼” NPTF 60
20 36 74 52 112
25 41 90 60 126 ⅜” BSP 103.21122AC 103.22122AC
103
10 ⅜” NPTF 103.21122BC 103.22122BC 260Bar
¾”-16ORB Upon request
½” BSP 103.21123AD 103.22123AD
13 ½” NPTF 103.21123BD 103.22123BD 260Bar
¾” - 16ORB Upon request
⅞” 14ORB Upon request
¾” BSP 103.21124AE 103.22124AE
20 ¾” NPTF 103.21124BE 103.22124BE 210Bar
1 1/16”-
Upon request
12ORB
1” BSP 103.21125AF 103.22125AF
103.21125BF 103.22125BF 210Bar
25 1” NPTF
1 5/16”- Upon request
12ORB
PH: 0800 FITTINGS 24 HOURS. J21
Return to Start of Section Return to Main Index
103 SERIES 103 SERIES
ISO-B CARBON STEEL ISO-B CARBON STEE
INTEVA QBNV SERIES
PH: 0800 FITTINGS 24 HOURS. J22
Return to Start of Section Return to Main Index
INTEVA QF1CF1CSEP3P3RIR1ER1S SSEERRIIEESS 131 SERIE
CPR
MALE
DN CH1 B ØF L
MALE 07 22 48 16,20 85,
09 ST2A4NDA62R,5D0 MO19D,8E0LS116
13 27 62,50 24,50 134
DNSizeC(HD1N) SiBzMe (A“)LECØHF1 (mm) LB (mm) DNF (mm) ØAL1157(mSmT)34A65NDM78A02AR,,L55ED00 MO23D70 FEELMSA11L35E
41030112D410301125370957175332111D53N70957199643706(...11..1...m11108825000⅞015001¾⅞00⅞00011m151⅞¾11½11½¾¼⅜¾//½/111½½¾¼⅜¾”///¾½¼⅜¾111½1”½¼21)¾½¼⅜¾111½¼””21”½¼””-”””””66”½¼6---””””””””666--””””””””””11”N”””””1””””11NNNN”N”NØ””1NBB””NNNNN”””BBBBBN--BB64NNBBBBBB--446PNNB1114BPBPPPPP2111118L1A11SSP423BPBPPPPOOSSSSSSSPOOOSPPSSSSS222O11T735SPP15222STSTTTTT051PPT(STSTTTTDPPPPPPPTRRO660O0OPTT5PPP3PP44RmFRR.OOOPTTFFFFFRFPPF5FFFFFPP..79FN....FFBBRRRB55FFBB0005mRRRB0000000BBBBBB)577550C111111111111111111111111221111111111111111111111111H13333333333333333333333332733333333333333333333333333111111211111111111111111111111111111111111111111111........................................M......1.11..1111111111111111111111.1111111111111111111111111111111111111111111111111F1119111111111111111A111111111211111111111111111161111111110111111111111111111111E111L511111111111111111141111111111111114111111111111111111CE1M5236364733227222,313144555236364873322722231314485558GGGBGAGBABBGAABAAABBABABGGGBGAGBABBGAABAAABBABAAB0AAGGHDDDHDCCEBEBEEOHHFFKKFGGHDDDHDCCEBEBEEOIHHFFKKFILE375111111111111111111111111111111111111111111111111136713333333333333333Ø333333333333333333333333233333333333111111111111111111111111F1111111111111111821111111D111...............................E...............1.1.1.1111111111111111111111.111111111111111111111111122222222M2222222222222222222222222222222222222222221111111111111111111111111111111111111111111111111A11111111111111111111111181111111112111111111111111111111L5236364273322722133144555523636417273322722133144855
07 22 48 16,20 85,50
621B,/540 129Ø2,8.F000 116L,4580.00 13 32 80,50 38 13
0D9N7 C2H41 6786678111202313922024921,,,///0,,,,555802451855550000000 211242224253736942334475,77630,,,5.760...285000000000000 11183121113115431756435,,2453,,5666524550222000...555000
111423001112357501793571119973 234757222345765505247655 111.121/154 557573.00
1.1/2 70.00 17832.50
430521 70 21950.00
75 2 75.00
111.00
30
125.00
45
Size (DN) SFizEeM(“)ALCEH2 (mm) C (mm)
D7N CH2 1F/4ECMAL2E2Ø.0D0 15 36 78 42 1
L48.00 28.00 851.570 45 92,50 48 1
097 22 3/848 27.2080 85,6540.50 32.00 11632.0150 55 105 55 1
0341121D321190013121930517573107903175N C2H72 11131..1111/689/689324//1134021744022247602C,,,08,,,,5558855,55555500000000 65432275551.....Ø3385440000023538440250882000008208528D0 111181321111311564715364L53,1986,,5324,,55542055204000500...555.00000 32.00 65 132,50 80 2
368453223354052565272655 217113532.50 38.00 1164.550 80 100
65 48.00 165
55.00
80.00 134.50
154.00
173.00
215.00
445 80 2 165 80.10000 165.00 100.00
PH: 0800 FITTINGS 24 HOURS. J23
Return to Start of Section Return to Main Index
131 SERIES 131 SERIE
CPR CPR
INTEVA QFF SERIES
MALE
DN CH1 B ØF L
07 22 48 16,20 85,
09 24 62,50 19,80 116
13 27 62,50 24,50 134
15 36 70,50
17 45 82,50 27 13
21 55 30 15
30 70 90 36 17
45 75 111 57 21
125 73
FEMALE
DN CH2 C ØD
07 22 48 28 85
32 11
09 27 64,50 38 13
42 1
13 32 80,50 48 1
55 1
15 36 78 80 2
100
17 45 92,50
21 55 105
30 65 132,50
45 80 165
PH: 0800 FITTINGS 24 HOURS. J24
Return to Start of Section Return to Main Index
220033 SSEERRIIEESS 203 SERIE
TTGGWW TGW
INTEVA QVS SERIES
MALE
Size (DMMN)AALSLEiEze (“) E/C (mm) C (mm) DN E/C SCSTTAANNØDDFAARRDDMØMGOODDEELLSLS
F 0(m6m) 19G (mm36) 1L4(,m90m) M27x1,5 72
10 22 40,50 18,95 M30x1,5 81
DD1N3N 27ØØAA 46 22MMAALLEME35x1,5 FFEE9MM2A
DDNN EE/C/C CC ØØFF ØØGG LL
0066 1199 6 3366 1144,9,190/04 MM2277x1x191,5,5 7722 36.00 1042206.50690 ½¼⅜76543½⅜¼½⅜¼11815½⅜¼”””””””””MMMMNNN”””BBBNNN2334BBBPPPSSSPPP87055SSSTTTPPP1xx3xTTTx765FFFPPP11111,FFF3565....855550 2222226422222221987000000989000010035122333333,,,23333.3356.......489000111111.......050011110110011111101111111111111111111111111111MM11332211MMM332211BAABAB54BABABA977DDCC45BBDDCCBB280xxxxx11222,,22222255222222000000000000333333333333......11211111111......1111113562122222222222207762111111111111
183.295
1100 2222 41400,5,500 1188,9,395/58 MM3300x2x121,5,5 8811 40.50
2124510.0000
1133 2277 1345456666 22828,229,1295/52 MMMM34345555xx2xx11711,,55,,55 9922 46.00 21813.395
2200 3355 111122
2255 4411 206633 33636/4 MM5544x3x151,5,5 112266 56.00
3322 5588 8283573,755,5500 44959,5518,5800 MMMM777708480xx1xx2222 115500
4400 6611 116677 63.00 32620.000 ¾¾”M”B5BS4SPxP1.5 221002336.1.01110111144AAEE 220033.1.12211
49.80 ¾¾1”1””M”NBNB7PSP0STPxTPF2F 222210005033303..11...01111101111111114545BABAEFEF 220033.1.12211
5500 7711 31211188 6699,14,4.010/4 MM99252x8x22 223377 75.00 52525.500 11” ”NMNP7P8TTxF2F 220033.1.12211
40 1.1/2 61 83.50 11¼¼” ”BBSSPP 221060373.1..01101111155BBFF 220033.1.12211
11¼¼”M”N9NP2PTxT2FF 220033.1.111111166AAGG 220033.1.12211
50 2 71 118.00 63932.240 222003337.1..10110111166BBGG 220033.1.12211
4400 11½½” ”BBSSPP 220033.1.111111177AAHH 220033.1.12211
11½½” ”NNPPTTFF 220033.1.111111177BBHH 220033.1.12211
5500 22” ”BBSSPP 220033.1.111111188AAI I 220033.1.1221
22” ”NNPPTTFF 220033.1.111111188BBI I 220033.1.1221
FEMALE
DN E/C B CH1 L
CH016
Size F(FDENEM)MASALizLEeE(“) E/C (mm) B (mm) (m1m02) 1L9(mm) 59 L (mm)32 72
81
13 22 67 36 92
20 112
DDNN EE/C/C BB CCHH11 LL 322.050 27 73,50 41 126
3634.0200 150
0066 11996 5599 1/4 3322 19 59.00 41.5000 35 89,50 50 167
110022 7722 67.00 4712.00 105,5702.00 65 237
1133 2222727210 6677 3366 73.50 50.00
2200 7733,5,500 3/8 4411 22 8811 89.50 658811.00 113403,,558001.00 80
2255 105.50 65.00 85
3322 335513 8899,5,500 1/2 5500 27 9922 130.50 7912.00 203,5902.00 105
4400 5454181820 110055,5,500 6655 111122 143.50 80.00
5500 113300,5,500 3/4 8800 35 112266 203.50 112.00 112.00
115500 85.00
661125 114433,5,5001 8855 41 116677 126.00 126.00
7711 220033,5,500 110055 223377 105.00
150.00 150.00
32 1.1/4 58
40 1.1/2 61 167.00 167.00
50 2 71 237.00 237.00
PH: 0800 FITTINGS 24 HOURS. J25
Return to Start of Section Return to Main Index
2TG02TW3G0W3SESREIRESIES 203 SERIE
TGW
INTEVA QVS SERIES
MALE
DN E/C C ØF ØG L
06 19 36 14,90 M27x1,5 72
10 22 40,50 18,95 M30x1,5 81
13 27 46 22 M35x1,5 92
20 35 56 28,95 M45x1,5 112
25 41 63 36 M54x1,5 126
32 58 75 49,80 M70x2 150
40 61 83,50 55 M78x2 167
50 71 118 69,40 M92x2 237
FEMALE
DN E/C B CH1 L
06 19 59 32 72
36 81
102 22 67 41 92
50 112
13 27 73,50 65 126
80 150
20 35 89,50 85 167
105 237
25 41 105,50
32 58 130,50
40 61 143,50
50 71 203,50
PH: 0800 FITTINGS 24 HOURS. J26
Return to Start of Section Return to Main Index
PH: 0800 FITTINGS 24 HOURS. J27
Return to Start of Section Return to Main Index
PH: 0800 FITTINGS 24 HOURS. J28
Return to Start of Section Return to Main Index
The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
Fluid Fitting 2018_extended
Discover the best professional documents and content resources in AnyFlip Document Base.
Search