Canada Accessories Guide (2021) - 8M0174470

ELECTRICAL


HARNESS ADAPTER 25 ft. (7.6 meter) data harness. Provides data link between DTS engine and 357.70
84-892451T25
214C62
CONTROLS AND RIGGING 30 ft. (9.1 meter) data harness. Provides data link between DTS engine and 370.54
command module harness.
Works with all engines equipped with 14‑pin connectors.
222C32
84-892451T30
command module harness.
Works with all engines equipped with 14‑pin connectors.
EXTENSION HARNESS - 14 PIN


84-860624 87C28 145.47
Adapts engine harness 84‑806389A 2 (used on 1994‑1997 D3.0L, D3.6L and 84-8M0149640 231C24 385.41
D4.2L diesel models) to extension harnesses 84‑860615 or 84‑860616. 35 ft. (10.7 meter) data harness. Provides data link between DTS engine and
HARNESS ADAPTER command module harness.
Works with all engines equipped with 14‑pin connectors.
14 PIN DATA HARNESS










84-860625 103C88 173.14
Adapts engine harness 84‑855509 or 84‑803626 (used on 1997 & up D2.8L and
D4.2L ES and EI diesel models) to extension harnesses 84‑860615 or 84‑860616. 84-8M0146749 374C24 623.73
21 pin to 17 pin connector
40 foot 14‑pin Low Loss Data Harness
All 14 Pin Engines
14 PIN DATA HARNESSES
14 PIN DATA HARNESS
EXTENSION HARNESS - 14 PIN











84-8M0146742 92C30 153.83
84-892451T06 105C92 176.54 Low Loss, All 14 PIN Engines, Data Harness, 5 FEET. Scenarios when Low Loss
cables are required ‑ for harness length where the overall data cable run from
6 ft. (1.8 meter) data harness. Provides data link between DTS engine and engine to helm is 35 FEET or more, all multi‑helm applications, all Joystick piloting
command module harness. and electric steering helm applications, and all applications with three or more
Works with all engines equipped with 14‑pin connectors. engines
84-892451T10 127C41 212.36 All 14 Pin Engines
10 ft. (3.0 meter) data harness. Provides data link between DTS engine and 84-8M0146743 129C22 215.37
command module harness. Low Loss, All 14 PIN Engine, Data Harness, 10 FEET. Scenarios when Low Loss
Works with all engines equipped with 14‑pin connectors. cables are required ‑ for harness length where the overall data cable run from
84-892451T15 181C37 302.30 engine to helm is 35 FEET or more, all multi‑helm applications, all Joystick piloting
and electric steering helm applications, and all applications with three or more
15 ft. (4.6 meter) data harness. Provides data link between DTS engine and engines
command module harness. All 14 Pin Engines
Works with all engines equipped with 14‑pin connectors. 84-8M0146744 151C44 252.40
84-892451T20 192C70 321.16 Low Loss, All 14 PIN Engine, Data Harness, 15 FEET. Scenarios when Low Loss
20 ft. (6.1 meter) data harness. Provides data link between DTS engine and cables are required ‑ for harness length where the overall data cable run from
command module harness. engine to helm is 35 FEET or more, all multi‑helm applications, all Joystick piloting
Works with all engines equipped with 14‑pin connectors. and electric steering helm applications, and all applications with three or more
84-892451B20 181C40 302.35 engines
20 ft. (6.1 meter) data harness. Provides data link between DTS engine and All 14 Pin Engines
command module harness. 84-8M0146745 185C45 309.08
Bulk Pack ‑ 6 harnesses to a box. Low Loss, All 14 PIN Engine, Data Harness, 20 FEET. Scenarios when Low Loss
Works with all engines equipped with 14‑pin connectors. cables are required ‑ for harness length where the overall data cable run from
Priced individually, sold @ multiples of 6 engine to helm is 35 FEET or more, all multi‑helm applications, all Joystick piloting
and electric steering helm applications, and all applications with three or more
engines
All 14 Pin Engines
542 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


14 PIN DATA HARNESS 84-8M0146756 658C66 1097.77
90 foot 14‑pin Low Loss Data Harness
All 14 Pin Engines
84-8M0146757 710C61 1184.35
100 foot 14‑pin Low Loss Data Harness
All 14 Pin Engines
84-8M0146758 725C66 1209.43 CONTROLS AND RIGGING
110 foot 14‑pin Low Loss Data Harness
All 14 Pin Engines
84-8M0146759 725C66 1209.43
120 foot 14‑pin Low Loss Data Harness
All 14 Pin Engines
84-8M0146746 220C48 367.46
25 foot 14‑pin Low Loss Data Harness 14 PIN FEMALE WEATHER CAP
All 14 Pin Engines
84-8M0146747 287C76 479.61
30 foot 14‑pin Low Loss Data Harness
All 14 Pin Engines
84-8M0146748 337C24 562.07
35 foot 14‑pin Low Loss Data Harness
All 14 Pin Engines
84-8M0146749 374C24 623.73
40 foot 14‑pin Low Loss Data Harness
All 14 Pin Engines
14 PIN DATA HARNESS 8M0126960 12C69 21.16
Heavy Duty 14 pin Female Weather Cap
Reusable weather cap to be used to protect the integrity of the 14 pin data cable
when connections are not able to be immediately made
14 PIN MALE WEATHER CAP







84-8M0146750 407C20 678.67
45 foot 14‑pin Low Loss Data Harness
All 14 Pin Engines
84-8M0146751 442C24 737.06
50 foot 14‑pin Low Loss Data Harness 8M0126959 12C69 21.16
All 14 Pin Engines Heavy Duty 14 pin Male Weather Cap
84-8M0146752 479C58 799.29 Reusable weather cap to be used to protect the integrity of the 14 pin data cable
55 foot 14‑pin Low Loss Data Harness when connections are not able to be immediately made
All 14 Pin Engines
84-8M0146753 512C03 853.37 10 PIN (YELLOW) DATA HARNESSES
60 foot 14‑pin Low Loss Data Harness
All 14 Pin Engines CAN DATA HARNESS - 10 PIN - NO RESISTORS DTS
(YELLOW)
14 PIN DATA HARNESS












84-879312T44 26C79 44.66
84-8M0146754 462C59 770.98 Contains CAN 1,2, and 3. 1 ft. (0.3 meter) SmartCraft data harness without
70 foot 14‑pin Low Loss Data Harness resistors
All 14 Pin Engines Provides data link between SmartCraft System CAN Bus components on DTS
84-8M0146755 595C35 992.26 applications (Digital Throttle & Shift)
80 foot 14‑pin Low Loss Data Harness
All 14 Pin Engines


2021 Canada Accessories Guide 543

ELECTRICAL


84-879312T45 29C28 48.80 10 PIN (BLUE) DATA HARNESSES
Contains CAN 1,2, and 3. 2 ft. (0.6 meter) SmartCraft data harness without
CONTROLS AND RIGGING applications (Digital Throttle & Shift) 32C80 54.68 RESISTORS (BLUE)
resistors
CAN DATA HARNESS - 10 PIN NON DTS WITH
Provides data link between SmartCraft System CAN Bus components on DTS
84-879312T46
Contains CAN 1,2, and 3. 3 ft. (0.9 meter) SmartCraft data harness without
resistors
Provides data link between SmartCraft System CAN Bus components on DTS
applications (Digital Throttle & Shift)
84-879312T47
Contains CAN 1,2, and 3. 4 ft. (1.2 meter) SmartCraft data harness without
resistors 37C43 62.38
Provides data link between SmartCraft System CAN Bus components on DTS
applications (Digital Throttle & Shift)
CAN DATA HARNESS - 10 PIN - NO RESISTORS
(YELLOW) 84-879982T20 82C26 137.10
84-879969T 6 59C42 99.05 20 ft. (6.1 meter) SmartCraft data harness with (2) termination resistors
6 ft. (1.8 meter) SmartCraft data harness without resistors Includes connections for horn and link gauge. Provides data link between
Provides data link between SmartCraft CAN P, X and H components. SmartCraft CAN P Components.
84-879969T10 82C70 137.84 84-879982B20 78C21 130.35
10 ft. (3.0 meter) SmartCraft data harness without resistors 20 ft. (6.1 meter) SmartCraft data harness with (2) termination resistors
Provides data link between SmartCraft CAN P, X and H components. Includes connections for horn and link gauge. Provides data link between
84-879969T15 106C84 178.07 SmartCraft CAN P Components.
15 ft. (4.6 meter) SmartCraft data harness without resistors Priced individually, sold @ multiples of 12
Provides data link between SmartCraft CAN P, X and H components. 84-879982T25 86C75 144.59
84-879969T20 151C24 252.07 25 ft. (7.6 meter) SmartCraft data harness with (2) termination resistors
20 ft. (6.1 meter) SmartCraft data harness without resistors Includes connections for horn and link gauge. Provides data link between
SmartCraft CAN P Components.
Provides data link between SmartCraft CAN P, X and H components. 90C65 151.08
84-879969T30 206C97 344.95 84-879982T30
30 ft. (9.1 meter) SmartCraft data harness without resistors 30 ft. (9.1 meter) SmartCraft data harness with (2) termination resistors
Includes connections for horn and link gauge. Provides data link between
Provides data link between SmartCraft CAN P, X and H components. SmartCraft CAN P Components.
CAN DATA HARNESS - 10 PIN WITH ONE RESISTOR 84-879982B30 86C30 143.81
(YELLOW) 30 ft. (9.1 meter) SmartCraft data harness with (2) termination resistors
Includes connections for horn and link gauge. Provides data link between
SmartCraft CAN P Components.
Priced individually, sold @ multiples of 12
CAN DATA HARNESS - 10 PIN - NO RESISTORS NON
DTS (BLUE)






84-879980T10 94C69 157.80
10 ft. (3.0 meter) SmartCraft data harness with one resistor
Provides data link between SmartCraft CAN P, X and H components.
84-879980B10 99C42 165.70
10 ft. (3.0 meter) SmartCraft data harness with one resistor
Provides data link between SmartCraft CAN P, X and H components. 84-879968T 6 41C34 68.90
Priced individually, sold @ multiples of 12 6 ft. (1.8 meter) SmartCraft data harness without resistors and no additional
84-879980T15 116C21 193.66 connections
15 ft. (4.6 meter) SmartCraft data harness with one resistor Provides data link between SmartCraft CAN P Components.
Provides data link between SmartCraft CAN P, X and H components. 84-879968T10 50C42 84.04
84-879980T30 170C92 284.85 10 ft. (3.0 meter) SmartCraft data harness without resistors and no additional
connections
30 ft. (9.1 meter) SmartCraft data harness with one resistor Includes connections for horn and link gauge. Provides data link between
Provides data link between SmartCraft CAN P, X and H components. SmartCraft CAN P Components.
84-879980B30 169C49 282.49 84-879968B10 44C93 74.89
30 ft. (9.1 meter) SmartCraft data harness with one resistor 10 ft. (3.0 meter) SmartCraft data harness without resistors and no additional
Provides data link between SmartCraft CAN P, X and H components. connections
Priced individually, sold @ multiples of 12 Provides data link between SmartCraft System CAN Bus Components
Priced individually, sold @ multiples of 12
84-879968T15 53C18 88.64
15 ft. (4.6 meter) SmartCraft data harness without resistors and no additional
connections
Provides data link between SmartCraft System CAN Bus Components



544 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


84-879968T20 64C96 108.28 ADAPTER HARNESSES - 14 PIN
20 ft. (6.1 meter) SmartCraft data harness without resistors and no additional
connections
Provides data link between SmartCraft System CAN Bus Components DUAL HELM ADAPTER KIT- DTS
84-879968T25 62C98 104.96
25 ft. (7.6 meter) SmartCraft data harness without resistors and no additional
connections CONTROLS AND RIGGING
Provides data link between SmartCraft System CAN Bus Components
84-879968T30 82C49 137.49
30 ft. (9.1 meter) SmartCraft data harness without resistors and no additional
connections
Provides data link between SmartCraft System CAN Bus Components
84-879968B30 78C21 130.35
30 ft. (9.1 meter) SmartCraft data harness without resistors and no additional
connections
Provides data link between SmartCraft System CAN Bus Components 84-893330K01 131C58 219.30
Priced individually, sold @ multiples of 12 Used with dual stations/ dual helms ‑ Requires one for single‑engine installation
84-879968T50 73C92 123.20 and two for dual‑engine installation. Adapts primary 14‑pin data harness to dual
helms.
50 ft (15.2 meter) SmartCraft data harness without resistors and no additional
connections
Provides data link between SmartCraft System CAN Bus Components ADAPTER HARNESSES - 2 PIN
84-879968T80 99C76 166.28
80 ft (24.4 meter) SmartCraft data harness without resistors and no additional 2 PIN LINK HARNESS- CAN
connections
Provides data link between SmartCraft System CAN Bus Components
CAN DATA HARNESS - 10 PIN - ONE RESISTOR NON
DTS (BLUE)







84-893452A01 8C77 14.62
Used to link CAN Networks together.
2 PIN "Y" ADAPTER HARNESS - LINK ADAPTER

84-879981T10 58C63 97.72
10 ft. (3.0 meter) SmartCraft data harness with one resistor
Provides data link between SmartCraft System CAN Bus Components
84-879981T15 70C73 117.87
15 ft. (4.6 meter) SmartCraft data harness with one resistor
Provides data link between SmartCraft System CAN Bus Components
84-879981T20 76C37 127.29
20 ft. (6.1 meter) SmartCraft data harness with one resistor
Provides data link between SmartCraft System CAN Bus Components
84-879981B20 72C84 121.40
20 ft. (6.1 meter) SmartCraft data harness with one resistor 84-896370T01 16C86 28.10
Provides data link between SmartCraft System CAN Bus Components Used on DTS engines that require extended length CAN networks.
Priced individually, sold @ multiples of 12
84-879981T25 81C48 135.80 ADAPTER HARNESSES
25 ft. (7.6 meter) SmartCraft data harness with one resistor
Provides data link between SmartCraft System CAN Bus Components ADAPTER - NON DTS 14 PIN TO 8 PIN
84-879981T30 92C68 154.47
30 ft. (9.1 meter) SmartCraft data harness with one resistor
Provides data link between SmartCraft System CAN Bus Components
84-879981T50 101C73 169.54
50 ft. (15.2 meter) SmartCraft data harness with one resistor
Provides data link between SmartCraft System CAN Bus Components
84-879981T80 108C55 180.92
80 ft. (24.4 meter) SmartCraft data harness with one resistor
Provides data link between SmartCraft System CAN Bus Components


84-896539T01 59C81 99.67
1 ft adapter that allows you to connect a 14 pin (Female) boat harness to an 8 pin
(Male) engine connection. Includes bracket and screws
2006 and newer Non DTS Outboards from 25 Hp to 250 HP‑ 14 Pin Connectors

2021 Canada Accessories Guide 545

ELECTRICAL


84-896539T05 62C98 104.96 ADAPTER - NON DTS 14 PIN TO 8 PIN - 3 FOOT
5 ft adapter that allows you to connect a 14 pin (Female) boat harness to a 8 pin
CONTROLS AND RIGGING 8 ft adapter that allows you to connect a 14 pin (Female) boat harness to a 8 pin
(Male) engine connection. Includes bracket and screws
2006 Non DTS Outboards from 25 Hp to 250 HP‑ 14 pin connector
84-896539T08
112.88
67C72
(Male) engine connection. Includes bracket and screws
2006 Non DTS Outboards from 25 Hp to 250 HP‑ 14 pin connector
ADAPTER - NON DTS 8 PIN TO 14 PIN


84-896541T01 59C81 99.67
3 foot adapter that allows you to connect 14 pin (Female) boat harness to the 8 pin
(Female) engine connection.
2005, 2006 ‑ 8/9.9 HP 4 stroke and newer
ADAPTER - NON DTS 14 PIN TO 8 PIN - 5 FOOT
84-896541T05 62C98 104.96
5 foot adapter that allows you to connect 14 pin (Female) boat harness to the 8 pin
(Female) engine connection.
84-896542T01 60C97 101.62 2005, 2006 ‑ 8/9.9 HP 4 stroke and newer
1 ft adapter that allows you to connect 8 pin (Female) boat harness to the 14 pin ADAPTER - NON DTS 14 PIN TO 8 PIN - 8 FOOT
(Male) engine connection. Includes bracket and screws 84-8M0127018 69C18 115.30
2006 Non DTS Outboards from 25 Hp to 250 HP‑ 14 pin connector 8 foot adapter that allows you to connect 14 pin (Female) boat harness to the 8 pin
84-896542T05 62C98 104.96 (Female) engine connection.
5 ft adapter that allows you to connect 8 pin (Female) boat harness to the 14 pin 2005, 2006 ‑ 8/9.9 HP 4 stroke and newer
(Male) engine connection. Includes bracket and screws
2006 Non DTS Outboards from 25 Hp to 250 HP‑ 14 pin connector ADAPTER - NON DTS 14 PIN TO 8 PIN
ADAPTER - NON DTS 8 PIN TO 14 PIN
84-896542T08 67C72 112.88
8 ft adapter that allows you to connect 8 pin (Female) boat harness to the 14 pin
(Male) engine connection. Includes bracket and screws
2006 Non DTS Outboards from 25 Hp to 250 HP‑ 14 pin connector
ADAPTER - NON DTS 10 PIN TO 14 PIN





84-892092T01 62C98 104.96
1 ft adapter that allows you to connect 14 pin (Female) boat harness to the 8 pin
(Male) engine connection.
Older Outboards that are SmartCraft compatible engines
ADAPTER-NON DTS 10 PIN TO 14 PIN W/SMARTCRAFT
CAN DATA
84-858740T06 94C00 156.69
6 ft adapter that allows you to connect 10 pin (Female) boat harness to the 14 pin
(Female) engine connection.
2006 Non DTS 75, 90, 115 HP 4 stroke EFI
ADAPTER - NON DTS 8 PIN TO 14 PIN






84-8M0153356 91C21 152.02
Adapter allows connection of 10‑pin engine harness to a 14‑pin boat harness when
using SmartCraft gauges. This adapter includes a 10‑pin CAN output to drive
SmartCraft gauges using the 14‑pin boat harness without having to install a blue
CAN data harness. A termination resistor 859318T1 is required, and may be
ordered separately. This is required for Quicksilver and Mercury Remanufacturing
Plus Series 10‑pin engines when installed in boats using SmartCraft gauges that
84-896540T01 59C81 99.67 use a 14‑pin boat harness.
3 ft adapter that allows you to connect 8 pin (Male) boat harness to the 14 pin
(Male) engine connection.
2005, 2006 ‑ 8/9.9 HP 4 stroke and newer





546 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


ADAPTER - NON DTS 14 PIN TO 10 PIN HARNESS- 25 FT CLEAN POWER CONTROLS AND RIGGING












84-866337T01 43C04 71.72 84-896333T25 60C90 101.50
Adapter that allows you to connect engines that have the newer 14 pin engine 25 ft. harness. Used to reduce voltage drop when battery is located near the helm
harness to the older 10 pin helm harness of the boat. Connects to junction box at the helm.
MCM/MIE engines that have the 14 pin engine harness. Also used on Race Used on all DTS Engines
product (outboards only) that have a 14 pin engine harness being connected to a
10 pin helm harness. POWER HARNESS-ENGINE
ADAPTER HARNESS- ANALOG GAUGE - MCM










84-8M0113732 70C70 117.83
15 foot DTS clean power harness. Used when battery is located near the the
84-866377T01 97C14 161.90 engine. Connects to 2 pin clean power connector on the engine.
Mounts between the 14 pin Command Module harness and the data harness All L4 SC Verados, 200/225 Opti DTS, 20 in. L6 Verados and MCM DTS and EC
DTS‑ MCM only engines have this harness as part of the engine package. Must order loose for 25
in. and 30 in. L6 Verados.
ACCESSORY HARNESSES HARNESS - POWER 25 FT

DTS CLEAN POWER - HELM - 10 FOOT










84-889244T01 45C24 75.39
25 ft Clean Power harness with heavy gauge (10 ga) wire for lower voltage drop.
84-8M0127681 56C78 94.63 Use from crank battery to 2 pin connector on engine. DTS and MCM EC engines.
10 foot DTS clean power for use at the helm. ACCESSORY POWER HARNESS / RELAY HARNESS KIT
All DTS and Joystick applications. When crank batteries are located near the helm
or mitigation of excessive voltage drop is desired.
DTS CLEAN POWER - HELM - 15 FOOT
84-8M0127682 58C41 97.35
15 foot DTS clean power for use at the helm
All DTS and Joystick applications. When crank batteries are located near the helm
or mitigation of excessive voltage drop is desired




84-899785K15 79C54 132.58
Used to provide accessory power to auxiliary loads when the keyswitch is in the
"Run" or "Accessory" positions. Includes 40 amp relay, harness and 15 ft power
cable with 40 amp fuse and three pole terminal block.
Used on 14‑pin boat harnesses that have a 3‑pin accessory power relay
connector.



2021 Canada Accessories Guide 547

ELECTRICAL


ACCESSORY POWER HARNESS / RELAY HARNESS KIT TERMINAL BLOCK
CONTROLS AND RIGGING










84-899785K30 88C91 148.17 86-889679 9C61 16.04
Used to provide accessory power to auxiliary loads when the keyswitch is in the 3 pole terminal block
"Run" or "Accessory" positions. Includes 40 amp relay, harness and 30 ft power Useful for up to 40 Amp circuit connections, used in Accessory Power kits
cable with 40 amp fuse and three pole terminal block.
Used on 14‑pin boat harnesses that have a 3‑pin accessory power relay ACCESSORY RELAY HARNESS KIT
connector.
ACCESSORY POWER HARNESS KIT









84-888429K12 26C47 44.11
Used to provide accessory power to auxiliary loads. Cable is connected to the
junction box and provides power to loads when the key switch in in the "Run"
84-899785K04 61C11 101.86 position. Includes 40 amp relay and harness.
Accessory power cable is designed to connect battery to terminal block to provide
connection point and power auxiliary loads. Includes 30 ft power cable with 40 TVS NOISE SUPPRESSION HARNESS
amp fuse and 3 pole terminal block.
Used on 14‑pin boat harnesses that have a 3‑pin accessory power relay
connector.
ACCESSORY POWER HARNESS KIT








84-8M0072192 24C92 41.53
Reduce noisy voltage spikes from Mercury solenoid coils (trim & tab).
Kit contains 2 harnesses that are used across solenoid coils to help reduce
electrical noise.
84-899785K02 63C60 106.00 JACKPLATE HARNESS ASSEMBLY
Accessory power cable is designed to connect battery to terminal block to provide
connection point and power auxiliary loads. Includes 15 ft power cable with 40
amp fuse and 3 pole terminal block.
Used on 14‑pin boat harness's that have a 3‑pin accessory power relay connector.
ACCESSORY RELAY KIT






84-881133T 1 37C79 63.00
Two 5 pin connector harness to 4 bullet (2 male, 2 female) connectors and 3 ring
terminals.
For jackplate control.
84-888429K11 23C79 39.64
Used in conjunction with accessory power harness to provide power to auxiliary
loads.
Used on 14‑pin boat harness's that have a 3‑pin accessory power relay connector.

548 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


IGNITION KEY SWITCHES KEY SWITCH KIT - 4 POSITION W/MOUNTING
HARDWARE
KEY SWITCH ASSEMBLY CONTROLS AND RIGGING











87-893353A03 64C32 107.20
Four position keyswitch (Off, Accessory, Run and Start) Includes keyswitch , key
F5H268 50C01 83.36 cover, bezel, 2 1/8 in. Dia. mounting housing and mounting hardware. 7/8 in. cut
For dash mount installations in panels up to 1/2 in.(12.7 mm). "Push to choke" out
feature. Can be used on DTS as well as non DTS installations
Fits all electric start Force outboards.
KEY SWITCH KIT - 4 POSITION MATCHED KEYS-DUALS
KEY SWITCH ASSEMBLY











87-893353A04 107C59 179.32
F5H078 57C04 95.07 Four position keyswitch‑ dual engines (Off, Accessory, Run and Start) Includes
For dash mount installations in panels up to 1‑7/16 in.(36 mm). "Push to choke" matched keyswitch , key cover, bezel, 2 1/8 in. Dia. mounting housing and
feature. mounting hardware. 7/8 in. cut out.
Fits all electric start Force outboards. Dual engine ‑ matched key set. Can be used on DTS as well as non DTS
installations
KEY SWITCH ASSEMBLY WITH CHOKE
KEY SWITCH KIT - 4 POSITION MATCHED KEYS-DUALS











87- 88107A13 42C46 70.75
3 ft.(915 mm) harness without audio warning horn. Has 6 pin connector that adapts 87-893353T04 82C80 138.01
to harness 84‑896537K_ 14 pin harness. 3/4 inch cut out with housing Four position keyswitch‑ dual engines (Off, Accessory, Run and Start) Includes
Used with 2 cycle engines that require push to choke feature. matched keyswitch and mounting hardware. 7/8 in. cut out. Does not include
housing
KEY SWITCH -4 POSITION Dual engine ‑ matched key set. Can be used on DTS as well as non DTS
installations












87-893353A02 43C04 71.72
Four position keyswitch (Off, Accessory, Run and Start) Loose switch only. 7/8 in.
cut out
Can be used on DTS as well as non DTS installations



2021 Canada Accessories Guide 549

ELECTRICAL


KEY SWITCH KIT - 4 POSITION MATCHED KEYS- KEY SWITCH -3 POSITION WITH DECAL/WASHER
TRIPLES
CONTROLS AND RIGGING










87-897716K03 120C20 200.35
87-893353A05 159C71 266.17 Three position keyswitch with shorter key and mounting length (Off, Run and Start)
Four position keyswitch‑ triple engines (Off, Accessory, Run and Start) Includes Loose switch only. 3/4 in. cut out. Includes switch with decal and washer.
matched keyswitch , key cover, bezel, 2 1/8 in. Dia. mounting housing and Matched Key set for Triple engine installs
mounting hardware. 7/8 in. cut out. Can be used on DTS as well as Non DTS installations. Matched keyswitches for
Triple engine ‑ matched key set Triple installations
KEY SWITCH KIT - 4 POSITION MATCHED KEYS- KEY SWITCH -3 POSITION WITH DECAL/WASHER
QUADS











87-897716K04 176C04 293.42
87-893353A06 211C98 353.29 Three position keyswitch with shorter key and mounting length (Off, Run and Start)
Four position keyswitch‑Quad engines (Off, Accessory, Run and Start) Includes Loose switch only. 3/4 in. cut out. Includes switch with decal and washer.
matched keyswitch , key cover, bezel, 2 1/8 in. Dia. mounting housing and Matched Key set for Quad engine installs
mounting hardware. 7/8 in. cut out. Can be used on DTS as well as Non DTS installations. Matched keyswitches for
Quad engine ‑ matched key set Quad installations
KEY SWITCH -3 POSITION WITH DECAL/WASHER KEY SWITCH -3 POSITION HOUSING













87-897716K01 47C09 78.49 879305A01 20C28 33.81
Three position keyswitch with shorter key and mounting length (Off, Run and Start) New keyswitch housing kit for 897716 series 3 position keyswitch. Kit includes 2
Loose switch only. 3/4 in. cut out. Includes switch with decal and washer. inch (52 MM) housing with mounting disc and bezel. Spin nut included in kit for
Can be used on DTS as well as Non DTS installations. easy mounting. (Key Switch is not included in this kit)
Can be used on DTS as well as Non DTS installations.
KEY SWITCH -3 POSITION WITH DECAL/WASHER
KEY SWITCH EXTENSION - NO CRANK - 5 FOOT












87-897716K02 91C80 153.00
Three position keyswitch with shorter key and mounting length (Off, Run and Start) 84-896691T05 24C44 40.74
Loose switch only. 3/4 in. cut out. Includes switch with decal and washer. This extension is used when the remote mounting a keyswitch (no crank possible).
Matched set for dual engine installs Only has off/on functions ‑ 5 foot length
Can be used on DTS as well as Non DTS installations. Matched keyswitches for Used on all DTS engines.
dual installations
550 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


KEY SWITCH EXTENSION - NO CRANK - 10 FOOT DECAL/WASHER KIT- 3 POSITION KEY SWITCH
84-896691T10 30C93 51.55
This extension is used when the remote mounting a keyswitch (no crank possible).
Only has off/on functions ‑ 10 foot length
Used on all DTS engines.
KEY SWITCH EXTENSION - NO CRANK - 15 FOOT
896691T15 36C42 60.69 CONTROLS AND RIGGING
This extension is used when the remote mounting a keyswitch (no crank possible).
Only has off/on functions ‑ 15 foot length
Used on all DTS engines.
KEY SWITCH EXTENSION - NO CRANK - 20 FOOT
37-899203A01 5C07 8.44
Used with 87‑897716 when not supplied in harness kit
KEY SWITCH ASSEMBLY







84-879312T77 58C32 97.20
This extension is used when the remote mounting a keyswitch (no crank possible).
Only has off/on functions ‑ 20 foot length
Used on all DTS engines.
KEY SWITCH EXTENSION - NO CRANK - 30 FOOT 87- 88107A 3 51C15 85.23
84-879312T78 68C10 113.51 3 ft.(915 mm) harness without audio warning horn. Has bullet connectors that
This extension is used when the remote mounting a keyswitch (no crank possible). adapt to harness 84‑84711M.
Only has off/on functions ‑ 30 foot length Fits (Japanese origin) Mariner 30, 40 (2 cyl. ‑ w/o integral oil injection) and 55 (2
Used on all DTS engines. cyl.) outboards used with optional remote controls.
KEY SWITCH EXTENSION - NO CRANK - 40 FOOT KEY SWITCH KIT
84-879312T79 78C41 130.68
This extension is used when the remote mounting a keyswitch (no crank possible).
Only has off/on functions ‑ 40 foot length
Used on all DTS engines.
KEY SWITCH EXTENSION - NO CRANK - 50 FOOT
84-879312T80 85C00 141.67
This extension is used when the remote mounting a keyswitch (no crank possible).
Only has off/on functions ‑ 50 foot length
Used on all DTS engines. 87- 88107A 5 52C06 86.77
KEY SWITCH EXTENSION - NO CRANK - 60 FOOT KEY SWITCH KIT
84-879312T81 108C97 181.62
This extension is used when the remote mounting a keyswitch (no crank possible).
Only has off/on functions ‑ 60 foot length
Used on all DTS engines.
KEY SWITCH EXTENSION - NO CRANK - 70 FOOT
84-879312T82 122C87 204.77
This extension is used when the remote mounting a keyswitch (no crank possible).
Only has off/on functions ‑ 70 foot length
Used on all DTS engines.
KEY SWITCH EXTENSION - NO CRANK - 80 FOOT
84-879312T83 133C54 222.56
This extension is used when the remote mounting a keyswitch (no crank possible). 87- 88107A10 43C83 73.06
Only has off/on functions ‑ 80 foot length Three position keyswitch (Off, Run and Start) Includes keyswitch and mounting
Used on all DTS engines. hardware.
2004 OptiMax 225 DTS outboards and 496 Mag MerCruiser DTS sterndrive and
inboard engines.













2021 Canada Accessories Guide 551

ELECTRICAL


KEY SWITCH ASSEMBLY WITH CHOKE 8 ft.(2.44 m) harness with audio warning horn. 146C52 244.22
84-816626A 8
CONTROLS AND RIGGING 4‑Stroke (USA Origin) outboards, Force 40 hp. and Higher (1993 and Newer) and
Fits Mercury/Mariner 6 hp. and Higher (2 cycle, USA & BEL Origin) outboards,
Mariner 30/40 hp. with oil injection (2 cycle, Japanese Origin), all Mercury/Mariner
Mercury Jet Drives. When used with MY2005 and newer 8/9.9 hp. FourStroke
outboards an adapter harness 892473A01 is required.
151C27
252.11
84-816626A11
11 ft.(3.35 m) harness with audio warning horn.
Fits Mercury/Mariner 6 hp. and Higher (2 cycle, USA & BEL Origin) outboards,
Mariner 30/40 hp. with oil injection (2 cycle, Japanese Origin), all Mercury/Mariner
4‑Stroke (USA Origin) outboards, Force 40 hp. and Higher (1993 and Newer) and
Mercury Jet Drives. When used with MY2005 and newer 8/9.9 hp. FourStroke
outboards an adapter harness 892473A01 is required.
87- 88107A13 42C46 70.75 84-816626A15 154C83 258.07
3 ft.(915 mm) harness without audio warning horn. Has 6 pin connector that adapts
to harness 84‑896537K_ 14 pin harness. 3/4 inch cut out with housing 15 ft.(4.57 m) harness with audio warning horn.
Used with 2 cycle engines that require push to choke feature. Fits Mercury/Mariner 6 hp. and Higher (2 cycle, USA & BEL Origin) outboards,
Mariner 30/40 hp. with oil injection (2 cycle, Japanese Origin), all Mercury/Mariner
KEY SWITCH KIT 4‑Stroke (USA Origin) outboards, Force 40 hp. and Higher (1993 and Newer) and
Mercury Jet Drives. When used with MY2005 and newer 8/9.9 hp. FourStroke
outboards an adapter harness 892473A01 is required.
84-816626A20 169C21 282.02
20 ft.(6.1 m) harness with audio warning horn.
Fits Mercury/Mariner 6 hp. and Higher (2 cycle, USA & BEL Origin) outboards,
Mariner 30/40 hp. with oil injection (2 cycle, Japanese Origin), all Mercury/Mariner
4‑Stroke (USA Origin) outboards, Force 40 hp. and Higher (1993 and Newer) and
Mercury Jet Drives. When used with MY2005 and newer 8/9.9 hp. FourStroke
outboards an adapter harness 892473A01 is required.
87- 88107T12 59C50 99.16 84-816626A24 180C18 300.29
Three position keyswitch (Off, Run and Start) Push to Choke Keyswitch 25 ft.(7.6 m) harness with audio warning horn.
Used with 2 cycle engines that require push to choke feature.
Fits Mercury / Mariner 6 hp. and Higher (2 cycle, USA & BEL Origin) outboards,
KEY SWITCH KIT Mariner 30/40 hp. with oil injection (2 cycle, Japanese Origin), all Mercury / Mariner
4‑Stroke (USA Origin) outboards, Force 40 hp. and Higher (1993 and Newer) and
Mercury Jet Drives. When used with MY2005 and newer 8/9.9 hp. FourStroke
outboards an adapter harness 892473A01 is required.
84-816626A25 348C30 580.50
25 ft.(7.6 m) harnesses with audio warning horn. Packaged with 2 harnesses with
matched keys for dual engine applications.
Fits Mercury / Mariner 6 hp. and Higher (2 cycle, USA & BEL Origin) outboards,
Mariner 30/40 hp. with oil injection (2 cycle, Japanese Origin), all Mercury / Mariner
4‑Stroke (USA Origin) outboards, Force 40 hp. and Higher (1993 and Newer) and
Mercury Jet Drives.
84-816626A29 196C00 326.68
30 ft.(9.1 m) harnesses with audio warning horn.
Fits Mercury / Mariner 6 hp. and Higher (2 cycle, USA & BEL Origin) outboards,
87-893449T01 53C45 89.09 Mariner 30/40 hp. with oil injection (2 cycle, Japanese Origin), all Mercury / Mariner
3 position Key Switch Kit 4‑Stroke (USA Origin) outboards, Force 40 hp. and Higher (1993 and Newer) and
Mercury Jet Drives.
634.77
84-816626A30
380C86
IGNITION KEY SWITCH WITH HARNESSES 30 ft.(9.1 m) harnesses with audio warning horn. Packaged with 2 harnesses with
matched keys for dual engine applications.
Mounts in a 2‑1/8 in.(54 mm) hole. Includes warning horn and electrical Fits Mercury / Mariner 6 hp. and Higher (2 cycle, USA & BEL Origin) outboards,
connections for power trim, instrumentation and lanyard stop switch. Mariner 30/40 hp. with oil injection (2 cycle, Japanese Origin), all Mercury / Mariner
4‑Stroke (USA Origin) outboards, Force 40 hp. and Higher (1993 and Newer) and
KEY SWITCH W/ HARNESS Mercury Jet Drives.
8 PIN KEY SWITCH AND IGNITION HARNESS








84-816626A 2 135C42 225.70
2 ft.(610 mm) harness with audio warning horn. 84-8M0125748 78C99 131.65
Fits Mercury/Mariner 6 hp. and Higher (2 cycle, USA & BEL Origin) outboards, 2 foot harness with horn, push to choke key switch, instrumentation connector, trim
Mariner 30/40 hp. with oil injection (2 cycle, Japanese Origin), all Mercury / Mariner connector and lanyard connector
4‑Stroke (USA Origin) outboards, Force 40 hp. and Higher (1993 and Newer) and Connects to 8 pin AMP connector engines (8/9.9 HP FourStrokes and similar)
Mercury Jet Drives. When used with MY2005 and newer 8/9.9 hp. FourStroke ‑Single Engine Application.
outboards an adapter harness 892473A01 is required.




552 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


84-8M0125749 88C61 147.70 84-896537K08 197C97 329.95
8 foot harness with horn, push to choke key switch, instrumentation connector, trim 8 ft. harness (896537A08) with new 14 pin connector for the engine and additional
connector and lanyard connector connectors that allow easy quick connect solutions to the rigging process. Included
Connects to 8 pin AMP connector engines (8/9.9 HP FourStrokes and similar) in this kit is also the new 3 position water‑proof high quality keyswitch. (897716)
‑Single Engine Application. 2006 and newer Non DTS Outboards from 25 Hp to 250 HP‑ 14 Pin Connectors
84-8M0125750 92C62 154.35 All MCM / MIE engines equiped with 14 pin connectors.
11 foot harness with horn, push to choke key switch, instrumentation connector, 84-896537K11 202C76 337.92 CONTROLS AND RIGGING
trim connector and lanyard connector 11 ft. harness (896537A11) with new 14 pin connector for the engine and
Connects to 8 pin AMP connector engines (8/9.9 HP FourStrokes and similar) additional connectors that allow easy quick connect solutions to the rigging
‑Single Engine Application. process. Included in this kit is also the new 3 position water‑proof high quality
keyswitch. (897716)
84-8M0125751 99C01 165.02 2006 and newer Non DTS Outboards from 25 Hp to 250 HP‑ 14 Pin Connectors
15 foot harness with horn, push to choke key switch, instrumentation connector, All MCM / MIE engines equiped with 14 pin connectors.
trim connector and lanyard connector 216C97 361.62
Connects to 8 pin AMP connector engines (8/9.9 HP FourStrokes and similar) 84-896537K15
‑Single Engine Application. 15 ft. harness (896537A15) with new 14 pin connector for the engine and
84-8M0125752 106C41 177.35 additional connectors that allow easy quick connect solutions to the rigging
process. Included in this kit is also the new 3 position water‑proof high quality
20 foot harness with horn, push to choke key switch, instrumentation connector, keyswitch. (897716)
trim connector and lanyard connector 2006 and newer Non DTS Outboards from 25 Hp to 250 HP‑ 14 Pin Connectors
Connects to 8 pin AMP connector engines (8/9.9 HP FourStrokes and similar) All MCM / MIE engines equiped with 14 pin connectors.
‑Single Engine Application. 84-896537K20 223C40 372.33
84-8M0125753 114C08 190.13 20 ft. harness (896537A20) with new 14 pin connector for the engine and
25 foot harness with horn, push to choke key switch, instrumentation connector, additional connectors that allow easy quick connect solutions to the rigging
trim connector and lanyard connector process. Included in this kit is also the new 3 position water‑proof high quality
Connects to 8 pin AMP connector engines (8/9.9 HP FourStrokes and similar) keyswitch. (897716)
‑Single Engine. 2006 and newer Non DTS Outboards from 25 Hp to 250 HP‑ 14 Pin Connectors
84-8M0125755 136C99 228.31 All MCM / MIE engines equiped with 14 pin connectors
30 foot harness with horn, push to choke key switch, instrumentation connector, 84-896537K24 232C02 386.69
trim connector and lanyard connector 25 ft. harness (896537A24) with new 14 pin connector for the engine and
Connects to 8 pin AMP connector engines (8/9.9 HP FourStrokes and similar) additional connectors that allow easy quick connect solutions to the rigging
single engine. process. Included in this kit is also the new 3 position water‑proof high quality
keyswitch. (897716)
8 PIN KEY SWITCH AND IGNITION HARNESS 2006 and newer Non DTS Outboards from 25 Hp to 250 HP‑ 14 Pin Connectors
All MCM / MIE engines equiped with 14 pin connectors
84-896537K25 436C46 727.44
2 each of 25 ft. harness (896537A24) with new 14 pin connector for the dual
engine applications and additional connectors that allow easy quick connect
solutions to the rigging process. Included in this kit is also the new 3 position
water‑proof high quality keyswitch (Matched keyswitch for dual engine
applications). (897716K02)
2006 and newer Non DTS Outboards from 25 Hp to 250 HP‑ 14 Pin Connectors
All MCM / MIE engines equiped with 14 pin connectors
84-896537K29 238C33 397.21
30 ft. harness (896537A29) with new 14 pin connector for the engine and
additional connectors that allow easy quick connect solutions to the rigging
process. Included in this kit is also the new 3 position water‑proof high quality
84-8M0125754 226C83 378.06 keyswitch. (897716)
25 foot harness with horns, push to choke key switches, instrumentation 2006 and newer Non DTS Outboards from 25 Hp to 250 HP‑ 14 Pin Connectors
connectors, trim connectors and lanyard connectors All MCM / MIE engines equiped with 14 pin connectors
Connects to 8 pin AMP connector engines (8/9.9 HP FourStrokes and similar) 84-896537K30 468C73 781.21
Dual Engine Application. 2 each of 30 ft. harness (896537A29) with new 14 pin connector for the dual
84-8M0125756 240C27 400.44 engine applications and additional connectors that allow easy quick connect
30 foot harness with horns, push to choke key switches, instrumentation solutions to the rigging process. Included in this kit is also the new 3 position
connectors, trim connectors and lanyard connectors water‑proof high quality keyswitch (Matched keyswitch for dual engine
Connects to 8 pin AMP connector engines (8/9.9 HP FourStrokes and similar).Dual applications). (897716K02)
Engine Application. 2006 and newer Non DTS Outboards from 25 Hp to 250 HP‑ 14 Pin Connectors
All MCM / MIE engines equiped with 14 pin connectors
KEY SWITCH W/ HARNESS - NON DTS 14 PIN 84-896537K40 286C27 477.13
40 ft. harness (896537A40) with new 14 pin connector for the engine and
additional connectors that allow easy quick connect solutions to the rigging
process. Included in this kit is also the new 3 position water‑proof high quality
keyswitch. (897716)
2006 and newer Non DTS Outboards from 25 Hp to 250 HP‑ 14 Pin Connectors
All MCM / MIE engines equiped with 14 pin connectors






84-896537K02 174C22 290.38
2 ft. harness (896537A02) with new 14 pin connector for the engine and additional
connectors that allow easy quick connect solutions to the rigging process. Included
in this kit is also the new 3 position water‑proof high quality keyswitch. (897716)
2006 and newer Non DTS Outboards from 25 Hp to 250 HP‑ 14 Pin Connectors
All MCM / MIE engines equiped with 14 pin connectors



2021 Canada Accessories Guide 553

ELECTRICAL


IGNITION HARNESS - NON DTS 14 PIN HARNESS - NON DTS 14 PIN- ANALOG GAUGE
CONTROLS AND RIGGING










84-896537T02 158C39 264.00 84-892990T01 32C38 53.98
2 ft. harness (896537A02) with new 14 pin connector for the engine and additional This harness will connect directly to the non DTS harness at the helm. It will allow
connectors that allow easy quick connect solutions to the rigging process. Loose you to connect to analog gauges on the dash and allows the choke function to work
harness. on the 8/9.9/15/20 FourStroke carbureted outboards with serial numbers beginning
Analog gauges also require the use of harness 84‑892990T01, T10 or T15. with "0R". 5 ft long Used with 84‑896537__ harness
2006 and newer Non DTS Outboards from 25 Hp to 250 HP‑ 14 Pin Connectors 2006 and newer Non DTS Outboards from 25 Hp to 250 HP‑ 14 Pin Connectors
All MCM / MIE engines equiped with 14 pin connectors All MCM / MIE engines equiped with 14 pin connectors
84-896537T08 166C32 277.20 84-892990T10 35C65 59.43
8 ft. harness (896537A08) with new 14 pin connector for the engine and additional This harness will connect directly to the non DTS harness at the helm. It will allow
connectors that allow easy quick connect solutions to the rigging process. Loose you to connect to analog gauges on the dash. 10 ft long Used with 84‑896537__
harness. harness
Analog gauges also require the use of harness 84‑892990T01, T10 or T15. 2006 and newer Non DTS Outboards from 25 Hp to 250 HP‑ 14 Pin Connectors
2006 and newer Non DTS Outboards from 25 Hp to 250 HP‑ 14 Pin Connectors All MCM / MIE engines equiped with 14 pin connectors
All MCM / MIE engines equiped with 14 pin connectors 84-892990T15 40C62 67.69
84-896537T11 174C22 290.38 This harness will connect directly to the non DTS harness at the helm. It will allow
11 ft. harness (896537A11) with new 14 pin connector for the engine and you to connect to analog gauges on the dash. 15 ft long Used with 84‑896537__
additional connectors that allow easy quick connect solutions to the rigging harness
process. Loose harness. 2006 and newer Non DTS Outboards from 25 Hp to 250 HP‑ 14 Pin Connectors
Analog gauges also require the use of harness 84‑892990T01, T10 or T15. All MCM / MIE engines equiped with 14 pin connectors
2006 and newer Non DTS Outboards from 25 Hp to 250 HP‑ 14 Pin Connectors
All MCM / MIE engines equiped with 14 pin connectors HARNESS EXTENSION- 10 PIN
84-896537T15 182C15 303.56
15 ft. harness (896537A15) with new 14 pin connector for the engine and
additional connectors that allow easy quick connect solutions to the rigging
process. Loose harness.
Analog gauges also require the use of harness 84‑892990T01, T10 or T15.
2006 and newer Non DTS Outboards from 25 Hp to 250 HP‑ 14 Pin Connectors
All MCM / MIE engines equiped with 14 pin connectors
84-896537T20 201C89 336.50
20 ft. harness (896537A20) with new 14 pin connector for the engine and
additional connectors that allow easy quick connect solutions to the rigging
process. Loose harness.
Analog gauges also require the use of harness 84‑892990T01, T10 or T15.
2006 and newer Non DTS Outboards from 25 Hp to 250 HP‑ 14 Pin Connectors 84-8M0058668 24C55 40.94
All MCM / MIE engines equiped with 14 pin connectors
84-896537T24 211C39 352.33 This harness extension will allow you to increase the length by 6 feet of the 10 pin
drop for instruments. The extension will work with Side Mount controls as well as
25 ft. harness (896537A24) with new 14 pin connector for the engine and any 896537 series main engine / boat harness.
additional connectors that allow easy quick connect solutions to the rigging
process. Loose harness.
Analog gauges also require the use of harness 84‑892990T01, T10 or T15. TRANSOM MOUNTED IGNITION KEYSWITCH
2006 and newer Non DTS Outboards from 25 Hp to 250 HP‑ 14 Pin Connectors
All MCM / MIE engines equiped with 14 pin connectors A transom mounted keyswitch allowing for activation of the starter
84-896537T29 214C44 357.40 solenoid, a choke or enrichner valve.
30 ft. harness (896537A29) with new 14 pin connector for the engine and
additional connectors that allow easy quick connect solutions to the rigging TRANSOM MOUNTED IGNITION KEYSWITCH
process. Loose harness.
Analog gauges also require the use of harness 84‑892990T01, T10 or T15.
2006 and newer Non DTS Outboards from 25 Hp to 250 HP‑ 14 Pin Connectors
All MCM / MIE engines equiped with 14 pin connectors
84-896537T40 254C53 424.23
40 ft. harness (896537A40) with new 14 pin connector for the engine and
additional connectors that allow easy quick connect solutions to the rigging
process. Loose harness.
Analog gauges also require the use of harness 84‑892990T01, T10 or T15.
2006 and newer Non DTS Outboards from 25 Hp to 250 HP‑ 14 Pin Connectors
All MCM / MIE engines equiped with 14 pin connectors

15000A 7 96C34 160.57
Includes a push‑to‑choke function and a warning horn. Has a 6 ft. (182 cm) cable
length. Has an 8 pin engine connector.
Fits many varying outboards and applications through Model Year 2005 where a
keyswitch with warning horn and choke (enrichner) function is desired. Outboards
require a remote control engine harness be used in conjunction with this switch in
order for it to function. Warning horn feature is not present on all model outboards.
554 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


TRANSOM MOUNTED IGNITION KEYSWITCH DUAL ENGINE START/STOP PAD CONTROLS AND RIGGING












15000A14 112C03 186.73 87-8M0117132 124C45 207.41
Includes a push‑to‑choke function and a warning horn. Has a 6 ft. (182 cm) cable Dash mount dual engine start/stop pad which allows start and stop of engines with
length. Has the 14 pin engine connector. keyswitches in the RUN position.
Fits many varying outboards and applications beginning in Model Year 2006 where Can be used on all dual engine DTS applications
a keyswitch with warning horn and choke (enrichner) function is desired. Outboards
require a remote control engine harness be used in conjunction with this switch in TRIPLE ENGINE START/STOP PAD
order for it to function. Warning horn feature is not present on all model outboards.
TRANSOM MOUNTED IGNITION KEYSWITCH










87-8M0117133 128C74 214.58
Dash mount triple engine start/stop pad which allows start and stop of engines with
keyswitches in the RUN position.
87-8M0090402 135C62 226.04 Can be used on all triple engine DTS applications.
Includes a key function and a warning horn. Has a 6 ft. (182 cm) cable length. Has
a 14 pin engine connector. QUAD ENGINE START/STOP PAD - STBD
Fits EFI outboards and applications after Model Year 2006 where a keyswitch with
warning horn is desired. Outboards require a remote control engine harness be
used in conjunction with this switch in order for it to function. Warning horn feature
is not present on all model outboards. For EFI models only (14 pin connector
engine) DOES NOT HAVE PUSH TO CHOKE
START / STOP SWITCHES

SINGLE ENGINE START/STOP PAD



87-8M0117134 125C44 209.07
Dash mount quad engine start/stop pad (STBD) which allows start and stop of
engines with keyswitches in the RUN position.
Can be used on all quad engine DTS applications (STBD)
QUAD ENGINE START/STOP PAD - PORT



87-8M0117131 115C58 192.63
Dash mount single engine start/stop pad which allows start and stop of engine with
keyswitch in the RUN position.
Can be used on all single engine DTS applications





87-8M0117135 125C44 209.07
Dash mount quad engine start/stop pad (PORT) which allows start and stop of
engines with keyswitches in the RUN position.
Can be used on all quad engine DTS applications (PORT)






2021 Canada Accessories Guide 555

ELECTRICAL


SINGLE ENGINE START/STOP PAD QUAD ENGINE START/STOP PAD - PORT
CONTROLS AND RIGGING










87-8M0117136 115C58 192.63 87-8M0117140 125C44 209.07
Low profile mount single engine start/stop pad which allows start and stop of Low profile mount quad engine start/stop pad (PORT) which allows start and stop
engine with keyswitch in the RUN position. of engines with keyswitches in the RUN position.
Can be used on all single engine DTS applications Can be used on all quad engine DTS applications (PORT)
DUAL ENGINE START/STOP PAD BEZEL












87-8M0117137 118C89 198.15 879315T01 11C80 19.68
Low profile mount dual engine start/stop pad which allows start and stop of engines Black
with keyswitches in the RUN position. Start/Stop switch kit, flush mount. For single, dual, triple and quad application.
Can be used on all dual engine DTS applications
BEZEL
TRIPLE ENGINE START/STOP PAD











879315T02 11C80 19.68
87-8M0117138 128C70 214.51 White
Low profile mount triple engine start/stop pad which allows start and stop of Start/Stop switch kit, flush mount. For single, dual, triple and quad application.
engines with keyswitches in the RUN position.
Can be used on all triple engine DTS applications START/STOP EXTENSION HARNESS
QUAD ENGINE START/STOP PAD - STARBOARD











84-896380T05 15C20 25.34
5 ft. Allows you to extend the harness an extra 5 ft from the start/stop button
87-8M0117139 125C44 209.07
Low profile mount quad engine start/stop pad (STBD) which allows start and stop Used on all DTS engines.
of engines with keyswitches in the RUN position.
Can be used on all quad engine DTS applications (STBD)






556 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


KEY SWITCHES KEY SWITCH KIT - 4 POSITION W/MOUNTING
HARDWARE
KEY SWITCH -3 POSITION WITH DECAL/WASHER CONTROLS AND RIGGING











87-893353A03 64C32 107.20
Four position keyswitch (Off, Accessory, Run and Start) Includes keyswitch , key
87-897716K01 47C09 78.49 cover, bezel, 2 1/8 in. Dia. mounting housing and mounting hardware. 7/8 in. cut
Three position keyswitch with shorter key and mounting length (Off, Run and Start) out
Loose switch only. 3/4 in. cut out. Includes switch with decal and washer. Can be used on DTS as well as non DTS installations
Can be used on DTS as well as Non DTS installations.
KEY SWITCH KIT - 4 POSITION MATCHED KEYS-DUALS
KEY SWITCH -3 POSITION WITH DECAL/WASHER











87-893353A04 107C59 179.32
87-897716K02 91C80 153.00 Four position keyswitch‑ dual engines (Off, Accessory, Run and Start) Includes
Three position keyswitch with shorter key and mounting length (Off, Run and Start) matched keyswitch , key cover, bezel, 2 1/8 in. Dia. mounting housing and
Loose switch only. 3/4 in. cut out. Includes switch with decal and washer. mounting hardware. 7/8 in. cut out.
Matched set for dual engine installs Dual engine ‑ matched key set. Can be used on DTS as well as non DTS
Can be used on DTS as well as Non DTS installations. Matched keyswitches for installations
dual installations
KEY SWITCH KIT - 4 POSITION MATCHED KEYS-
KEY SWITCH -4 POSITION TRIPLES












87-893353A02 43C04 71.72 87-893353A05 159C71 266.17
Four position keyswitch (Off, Accessory, Run and Start) Loose switch only. 7/8 in. Four position keyswitch‑ triple engines (Off, Accessory, Run and Start) Includes
cut out matched keyswitch , key cover, bezel, 2 1/8 in. Dia. mounting housing and
Can be used on DTS as well as non DTS installations mounting hardware. 7/8 in. cut out.
Triple engine ‑ matched key set




















2021 Canada Accessories Guide 557

ELECTRICAL


KEY SWITCH KIT - 4 POSITION MATCHED KEYS- IGNITION KEYS - NUMERIC
QUADS
CONTROLS AND RIGGING number.
To order correct key, convert the number stamped on your key to a part


REPLACEMENT IGNITION KEY







87-893353A06 211C98 353.29
Four position keyswitch‑Quad engines (Off, Accessory, Run and Start) Includes
matched keyswitch , key cover, bezel, 2 1/8 in. Dia. mounting housing and
mounting hardware. 7/8 in. cut out.
Quad engine ‑ matched key set
30431104 3C17 5.29
KEY SWITCH KIT - 4 POSITION MATCHED KEYS -
QUINTS Key stamped with "104"
Priced individually, sold @ multiples of 2
30431108 3C17 5.29
Key stamped with "108"
Priced individually, sold @ multiples of 2
30431123 3C17 5.29
Key stamped with "123"
Priced individually, sold @ multiples of 2
30431124 3C17 5.29
Key stamped with "124"
Priced individually, sold @ multiples of 2
30431125 3C17 5.29
87-8M0077850 213C38 355.64 Key stamped with "125"
Four position keyswitch‑Quint engines (Off, Accessory, Run and Start) Includes Priced individually, sold @ multiples of 2
matched keyswitch , key cover, bezel, 2 1/8 in. Dia. mounting housing and
mounting hardware. 7/8 in. cut out. 30431126 3C17 5.29
Quint engine ‑ matched key set Key stamped with "126"
Priced individually, sold @ multiples of 2
KEY SWITCH EXTENSION - NO CRANK - 5 FOOT
30431127 3C17 5.29
Key stamped with "127"
Priced individually, sold @ multiples of 2
30431128 3C17 5.29
Key stamped with "128"
Priced individually, sold @ multiples of 2
30431129 3C17 5.29
Key stamped with "129"
Priced individually, sold @ multiples of 2
30431130 3C17 5.29
Key stamped with "130"
84-896691T05 24C44 40.74 Priced individually, sold @ multiples of 2
This extension is used when the remote mounting a keyswitch (no crank possible). 30431131 3C17 5.29
Only has off/on functions ‑ 5 foot length
Used on all DTS engines. Key stamped with "131"
Priced individually, sold @ multiples of 2
KEY SWITCH EXTENSION - NO CRANK - 10 FOOT 30431132 3C17 5.29
84-896691T10 30C93 51.55 Key stamped with "132"
This extension is used when the remote mounting a keyswitch (no crank possible). Priced individually, sold @ multiples of 2
Only has off/on functions ‑ 10 foot length
Used on all DTS engines. 30431133 3C17 5.29
Key stamped with "133"
KEY SWITCH EXTENSION - NO CRANK - 15 FOOT Priced individually, sold @ multiples of 2
896691T15 36C42 60.69
This extension is used when the remote mounting a keyswitch (no crank possible). 30431134 3C17 5.29
Only has off/on functions ‑ 15 foot length Key stamped with "134"
Used on all DTS engines. Priced individually, sold @ multiples of 2









558 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


ALPHA/NUMERIC KEY CHART 896919961 12C52 20.87
Replacement for new 4 position Key switch (893353A__ series) Number is on
metal plate that comes with keys‑ #961
Key Chart A ‑ Alpha/Numeric Keys 896919962 12C52 20.87
Replacement for new 4 position Key switch (893353A__ series) Number is on
metal plate that comes with keys‑ #962
Key Number Part Number Status 896919963 12C52 20.87 CONTROLS AND RIGGING
1A 89491 1 Active Replacement for new 4 position Key switch (893353A__ series) Number is on
1B 89491 2 Active metal plate that comes with keys‑ #963
896919964 12C52 20.87
1C 89491 3 Active
Replacement for new 4 position Key switch (893353A__ series) Number is on
1D 89491 4 Active metal plate that comes with keys‑ #964
1E 89491 5 Active 896919965 12C52 20.87
1F 89491 6 Active Replacement for new 4 position Key switch (893353A__ series) Number is on
metal plate that comes with keys‑ #965
2A 89491 7 Active
896919966 12C52 20.87
2B 89491 8 Active
Replacement for new 4 position Key switch (893353A__ series) Number is on
2C 89491 9 Active metal plate that comes with keys‑ #966
2D 89491 10 Active 896919967 12C52 20.87
2E 89491 11 Active Replacement for new 4 position Key switch (893353A__ series) Number is on
metal plate that comes with keys‑ #967
2F 89491 12 Active
896919968 12C52 20.87
Replacement for new 4 position Key switch (893353A__ series) Number is on
IGNITION KEYS - 4 POSITION - BASE NUMBER metal plate that comes with keys‑ #968
12C52
896919969
893353 KEY SWITCH Replacement for new 4 position Key switch (893353A__ series) Number is on 20.87
metal plate that comes with keys‑ #969
To order correct key, convert the number stamped on your separate 896919970 12C52 20.87
plate for part number. Replacement for new 4 position Key switch (893353A__ series) Number is on
metal plate that comes with keys‑ #970
REPLACEMENT IGNITION KEY
IGNITION KEYS - 3 POSITION - BASE NUMBER
897716 KEY SWITCH
To order correct key, convert the number stamped on your key to a part
number.
REPLACEMENT IGNITION KEYS



896919951 12C52 20.87
Replacement for new 4 position Key switch (893353A__ series) Number is on
metal plate that comes with keys‑ #951
896919952 12C52 20.87
Replacement for new 4 position Key switch (893353A__ series) Number is on
metal plate that comes with keys‑ #952
896919953 12C52 20.87
Replacement for new 4 position Key switch (893353A__ series) Number is on
metal plate that comes with keys‑ #953 87-897716451 8C20 13.66
896919954 12C52 20.87 Replacement keys for 3 position 87‑897716 key switch. Number is on plate that
Replacement for new 4 position Key switch (893353A__ series) Number is on comes with original keys
metal plate that comes with keys‑ #954 87-897716457 8C20 13.66
896919955 12C52 20.87 Replacement keys for 3 position 87‑897716 key switch. Number is on plate that
Replacement for new 4 position Key switch (893353A__ series) Number is on comes with original keys #457
metal plate that comes with keys‑ #955 87-897716460 8C20 13.66
896919956 12C52 20.87 Replacement keys for 3 position 87‑897716 key switch. Number is on plate that
Replacement for new 4 position Key switch (893353A__ series) Number is on comes with original keys #460
metal plate that comes with keys‑ #956 87-897716461 8C20 13.66
896919957 12C52 20.87 Replacement keys for 3 position 87‑897716 key switch. Number is on plate that
Replacement for new 4 position Key switch (893353A__ series) Number is on comes with original keys #461
metal plate that comes with keys‑ #957 87-897716462 8C20 13.66
896919958 12C52 20.87 Replacement keys for 3 position 87‑897716 key switch. Number is on plate that
Replacement for new 4 position Key switch (893353A__ series) Number is on comes with original keys #462
metal plate that comes with keys‑ #958 87-897716463 8C20 13.66
896919959 12C52 20.87 Replacement keys for 3 position 87‑897716 key switch. Number is on plate that
Replacement for new 4 position Key switch (893353A__ series) Number is on comes with original keys #463
metal plate that comes with keys‑ #959 87-897716821 8C20 13.66
896919960 12C52 20.87 Replacement keys for 3 position 87‑897716 key switch. Number is on plate that
Replacement for new 4 position Key switch (893353A__ series) Number is on comes with original keys #821
metal plate that comes with keys‑ #960
2021 Canada Accessories Guide 559

ELECTRICAL


87-897716827 8C20 13.66 Key Number Part Number Status
Replacement keys for 3 position 87‑897716 key switch. Number is on plate that
CONTROLS AND RIGGING Replacement keys for 3 position 87‑897716 key switch. Number is on plate that 128 30431128 Active
126
30431126
Active
comes with original keys #827
127
30431127
Active
8C20
13.66
87-897716830
comes with original keys #830
129
30431129
Active
8C20
13.66
87-897716831
130
30431130
Active
Replacement keys for 3 position 87‑897716 key switch. Number is on plate that
131
Active
30431131
comes with original keys #831
13.66
30431132
87-897716832
8C20
Active
132
Replacement keys for 3 position 87‑897716 key switch. Number is on plate that
comes with original keys #832
134
30431134
Active
87-897716833 8C20 13.66 133 30431133 Active
Replacement keys for 3 position 87‑897716 key switch. Number is on plate that
comes with original keys #833 MARINER UNIQUE IGNITION KEYS
87-897716841 8C20 13.66
Replacement keys for 3 position 87‑897716 key switch. Number is on plate that To order correct key, convert the number stamped on your key to a
comes with original keys #841 Quicksilver part number. Fits Mariner (Japanese Origin) dash mounted
87-897716847 8C20 13.66 key panels
Replacement keys for 3 position 87‑897716 key switch. Number is on plate that
comes with original keys #847 REPLACEMENT IGNITION KEY
87-897716850 8C20 13.66
Replacement keys for 3 position 87‑897716 key switch. Number is on plate that
comes with original keys #850
87-897716851 8C20 13.66
Replacement keys for 3 position 87‑897716 key switch. Number is on plate that
comes with original keys #851
87-897716852 8C20 13.66
Replacement keys for 3 position 87‑897716 key switch. Number is on plate that
comes with original keys #852
87-897716853 8C20 13.66
Replacement keys for 3 position 87‑897716 key switch. Number is on plate that
comes with original keys #853
13294451 12D54 25.08
NUMERIC KEY CHART Key stamped with "451"
Priced individually, sold @ multiples of 2
13294457 16C47 27.45
Key Chart B ‑ Numeric Keys
Key stamped with "457"
Priced individually, sold @ multiples of 2
Key Number Part Number Status
101 30431101 N.L.A. MARINER UNIQUE IGNITION KEY CHART
102 30431102 N.L.A.
Key Chart C
103 30431103 N.L.A.
104 30431104 Active
Key Number Part Number Status
105 30431105 Active
111 93092M N.L.A.
106 30431106 Active
112 93093M N.L.A.
107 30431107 N.L.A.
113 93094M N.L.A.
108 30431108 Active
121 93095M Active
109 30431109 Active
122 93096M N.L.A.
110 30431110 N.L.A.
123 93097M Active
111 30431111 N.L.A.
221 93078M N.L.A.
112 30431112 N.L.A.
222 93079M N.L.A.
113 30431113 Active
223 93080M N.L.A.
114 30431114 N.L.A.
224 93081M N.L.A.
115 30431115 N.L.A.
225 93082M N.L.A.
116 30431116 Active
226 93083M N.L.A.
117 30431117 Active
227 93084M N.L.A.
118 30431118 Active
228 93085M N.L.A.
119 30431119 Active
229 93086M N.L.A.
120 30431120 Active
230 93087M N.L.A.
121 30431121 N.L.A.
231 93088M N.L.A.
122 30431122 Active
232 93089M N.L.A.
123 30431123 Active
233 93090M N.L.A.
124 30431124 Active
234 93091M N.L.A.
125 30431125 Active
451 13294451 Active
560 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


Key Number Part Number Status FORCE UNIQUE IGNITION KEY CHART
452 13294452 N.L.A.
453 13294453 Active Key Chart D
454 13294454 N.L.A.
455 13294455 Active Key Number Part Number Status
Not Stamped 817782 1 Active CONTROLS AND RIGGING
456 13294456 Active
457 13294457 Active A 817782 1 Active
458 13294458 Active B 817883 1 Active
459 13294459 Active C 817891 1 Active
460 13294460 N.L.A. D 817928 1 Active
461 13294461 Active E 817929 1 Active
462 13294462 Active 51 819012 Active
55 819013 Active
463 13294463 Active
464 13294464 Active 65 819014 Active
66 819015 Active
465 13294465 Active
466 13294466 Active 67 819016 Active
467 13294467 N.L.A.
468 13294468 Active IGNITION KEY COVER
469 13294469 N.L.A. BLACK PLASTIC KEY COVER
470 13294470 Active
FORCE UNIQUE IGNITION KEYS

To order correct key, convert the number stamped on your key to a
Quicksilver part number. Fits Force Ignition switches 1992 and prior.

REPLACEMENT IGNITION KEY



90468A 1 3C18 5.31
Fits most ignition switch keys
LANYARD STOP SWITCHES

Lanyard cord attaches to the toggle switch or cap and boat driver. When
switch toggles or cap pulls off switch, the ignition is interrupted and the
engine shuts down.
817782 1 3C46 5.77
Key stamped with "A" or not stamped with anything. LANYARD STOP SWITCH
817883 1 3C36 5.60
Key stamped with "B"
817891 1 3C46 5.77
Key stamped with "C"
817928 1 4C00 6.68
Key stamped with "D"
817929 1 3C36 5.60
Key stamped with "E"
819012 6C94 11.58
Key stamped with "51"
819013 7C14 11.91 87- 19674A05 54C65 91.08
Key stamped with "55" 5 ft.(1.53 m) harness. Surface mount or flush mount. Used when mounting
819014 7C14 11.91 controls with no lanyard switch included
Key stamped with "65" MCM/MIE engines. Do not use on DTS engines
819015 7C14 11.91
Key stamped with "66"
819016 7C14 11.91
Key stamped with "67"








2021 Canada Accessories Guide 561

ELECTRICAL


LANYARD STOP SWITCH LANYARD STOP SWITCH -DUAL FLUSH MOUNT
CONTROLS AND RIGGING










87- 19674A06 56C35 93.93 87- 19674A12 94C65 157.73
5 ft.(1.53 m) harness. 2 inch cut out with Black bezel. Used when mounting 5 ft.(1.53 m) harness. Surface or Flush mount. Used for Dual Engine installations
controls with no lanyard switch included. Used on Outboards and DTS engines
Chrome bezel optional ‑ order separate.
MCM/MIE engines. Do not use on DTS engines LANYARD STOP SWITCH -DUAL BEZEL 2 INCH
LANYARD STOP SWITCH











87- 19674A13 95C55 159.25
5 ft.(1.53 m) harness. 2 inch cut out with Black bezel. Used with dual engine
87- 19674A07 56C31 93.85 installations.
5 ft.(1.53 m) harness. Surface or Flush mount. Used when mounting controls with Chrome bezel optional ‑ order separate.
no lanyard switch included Used on Outboards and DTS engines
Used on Outboards and DTS engines
LANYARD STOP SWITCH - TRIPLE FLUSH MOUNT
LANYARD STOP SWITCH












8M0139419 124C94 208.23
87- 19674A08 56C31 93.86 Flush mount lanyard stop switch kit
5 ft.(1.53 m) harness. 2 inch cut out with Black bezel. Used when mounting Triple engine applications
controls with no lanyard switch included.
Chrome bezel optional ‑ order separate. LANYARD STOP SWITCH - QUAD FLUSH MOUNT
Used on Outboards and DTS engines
LANYARD STOP SWITCH - DUAL FLUSH MOUNT










8M0139420 134C23 223.71
Flush Mount lanyard stop switch kit
87-814324A 2 70C87 118.13 Quad engine applications
Dual engine kit. 5 ft.(1.53 m) harness. Surface mount or flush mount. Used when
mounting controls with no lanyard switch included
Used on Non DTS MCM/MIE Engine ‑ See 87‑19674A12 and A13 for OB/DTS
Installations



562 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


LANYARD STOP SWITCH LANYARD STOP SWITCH CAP CONTROLS AND RIGGING












87-823037A04 50C05 83.42 75095T 2 9D54 19.08
Fits Mercury/Mariner 2.5, 3.3, 4, 5 hp (U.S. S/N 0A809601 and above; Belgium S/N Replacement cap for (65503A__ and 856654A__ series) Lanyard Stop Switches.
9589154 and above) and 4/5/6 FourStroke. Fits Mercury/Mariner outboards and MCM/MIE engines.
LANYARD STOP SWITCH Priced individually, sold @ multiples of 2
Mercury Precision Branded, Clamshell Package Point of Sale Packaged.
75095Q 2 9D51 19.02
Replacement cap for (65503A__ and 856654A__ series) Lanyard Stop Switches.
Fits Mercury/Mariner outboards and MCM/MIE engines.
Priced individually, sold @ multiples of 2
Quicksilver Branded, Clamshell Package Point of Sale Packaged.
LANYARD CORD - 54 INCH



87-856654A 2 49C62 82.70
3‑1/2 in.(89 mm) wires, does not include cap. Normally closed switch
Fits Mercury/Mariner outboards.
LANYARD STOP SWITCH



8M0092850 12C59 20.98
Lanyard cord with new ergonomic plastic clip, 54 inches in length.
Can be utilized on any Mercury Marine/Quicksilver lanyard stop switch at the helm.
Does not work with engine mounted stop switches.
Priced individually, sold @ multiples of 2
Quicksilver Branded, Clamshell Package Point of Sale Packaged.
LANYARD CORD - 54 INCH
87-856654A 4 97C92 163.19
20 ft.(6.2 m) harness. Includes 2 caps.
Fits Mercury/Mariner outboards and MCM/MIE engines.
LANYARD DIODE KIT








8M0092849 12C59 20.98
Lanyard cord with new ergonomic plastic clip, 54 inches in length.
Can be utilized on any Mercury Marine/Quicksilver lanyard stop switch at the helm.
Does not work with engine mounted stop switches.
84-898289A72 42C82 71.37 Priced individually, sold @ multiples of 2
This kit is dual engine adapter that is required when connecting one lanyard stop
switch to two engines. Without this kit the engines would not be able to start or stop Mercury Precision Branded, Clamshell Package Point of Sale Packaged.
independently.
Fits Mercury / Mariner outboards.








2021 Canada Accessories Guide 563

ELECTRICAL


LANYARD COUNTER DISPLAY KIT LANYARD STOP SWITCH -DUAL BEZEL 2 INCH
CONTROLS AND RIGGING










8M0092854 147C79 246.32 87- 19674A13 95C55 159.25
Contains 12 Mercury Point‑of‑Sale packaged Lanyards for counter display. 5 ft.(1.53 m) harness. 2 inch cut out with Black bezel. Used with dual engine
installations.
LANYARD CORD - 70 INCH Chrome bezel optional ‑ order separate.
Used on Outboards and DTS engines
LANYARD STOP SWITCH -DUAL FLUSH MOUNT










8M0092851 5C83 9.70
Lanyard cord with improved ergonomic plastic clip, 70 inches in length.
Intended for use on Big Tiller applications.
87- 19674A12 94C65 157.73
LANYARD CORD 5 ft.(1.53 m) harness. Surface or Flush mount. Used for Dual Engine installations
Used on Outboards and DTS engines
SHADOW RESISTOR PACKS

RESISTOR PACK- DTS SHADOW MODE






823054 17C37 28.95
Fork style lanyard used with the engine mounted stop switch on the 2.5, 3.3, 4/5
HP (2‑cycle), 4/5/6 (FourStroke) outboard engines.
823054Q 27C24 45.41
Fork style lanyard used with the engine mounted stop switch on the 2.5, 3.3, 4/5
HP (2‑cycle), 4/5/6 (FourStroke) outboard engines.
Priced individually, sold @ multiples of 2 898091T01 11C48 19.14
Quicksilver Branded, Clamshell Package Point of Sale Packaged. Resistor pack used with DTS Shadow Mode applications. (#93) Included with the
harness for this versions Helm 1, Starboard 2
Triple engine / single helm applications 2006 models and newer
LANYARD SWITCHES
RESISTOR PACK #94 - QUAD DTS SHADOW MODE
LANYARD STOP SWITCH











898091T02 15C45 25.76
87- 19674A08 56C31 93.86 Resistor pack #94 used on Quad DTS Shadow control single helm applications.
Helm 1, Port 2
5 ft.(1.53 m) harness. 2 inch cut out with Black bezel. Used when mounting Quad engine / single helm applications 2006 models and newer
controls with no lanyard switch included.
Chrome bezel optional ‑ order separate.
Used on Outboards and DTS engines
564 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


RESISTOR PACK- DTS SHADOW MODE SMARTCRAFT JUNCTION BOX CONTROLS AND RIGGING












898091T03 17C80 29.68 98-878492K16 88C64 147.74
Resistor pack used with DTS Shadow Mode applications. (#97) Helm 2, 6‑Way SmartCraft Junction Box with (3) weather caps.
Starboard 2 Provides connection/distribution point for multiple components on CAN Bus
Included in lower or primary helm for dual helm installs (895816A, 895817A, system. Order 1 for single and 2 for twin engine installs.
895818A, and 895819A series helms) 113.79
Triple engine / dual helm applications 2006 models and newer. 878492T16 68C26
6‑Way SmartCraft Junction Box without weather caps.
RESISTOR PACK #98 ASSEMBLY - QUAD SHADOW Provides connection/distribution point for multiple components on CAN Bus
MODE system.
878492B16 66C06 110.10
6‑Way SmartCraft Junction Box without weather caps.
Provides connection/distribution point for multiple components on CAN Bus
system.
Priced individually, sold @ multiples of 24
SMARTCRAFT JUNCTION BOX





898091T04 16C83 28.05
Resistor pack #98 used with Quad DTS Shadow control dual helm applications.
(#98) Helm 2, Port 2
Quad engine / dual helm applications 2006 models and newer.

JUNCTION BOXES/JUNCTION BOX ACCESSORIES
878492K18 128C73 214.56
SMARTCRAFT JUNCTION BOX 8‑Way SmartCraft Junction Box with (4) weather caps.
Provides connection/distribution point for multiple components on CAN Bus
system.
878492T18 111C56 185.94
8‑Way SmartCraft Junction Box without weather caps.
Provides connection/distribution point for multiple components on CAN Bus
system.
SMARTCRAFT WEATHER CAP




878492K14 73C17 121.94
4‑Way SmartCraft Junction Box with (2) weather caps.
Provides connection/distribution point for multiple components on CAN Bus
system.
878492T14 53C06 88.44
4‑Way SmartCraft Junction Box without weather caps.
Provides connection/distribution point for multiple components on CAN Bus
system.
878492B14 55C16 91.93 859318T 2 7C70 12.81
4‑Way SmartCraft Junction Box without weather caps. Weather Cap for SmartCraft Junction Box
Provides connection/distribution point for multiple components on CAN Bus Provides weather protection at unused junction box connection points
system. 859318B 2 7C24 12.08
Priced individually, sold @ multiples of 24 Weather Cap for SmartCraft Junction Box
Provides weather protection at unused junction box connection points
Priced individually, sold @ multiples of 24







2021 Canada Accessories Guide 565

ELECTRICAL


10 PIN WEATHER CAP HELM MPR 2 PIN WEATHER CAP
CONTROLS AND RIGGING










888507T 6C18 10.30 86-8M0054244 6C48 10.81
10 pin weather cap with mounting tab. GT280 2 pin male weather cap.
Used for harnessing that could plug into a Junction Box. Used on Joystick (Zeus, Axius and JPO) applications for the Helm MPR connection
harness 8M2021476.
SMARTCRAFT J-BOX TERMINATOR/RESISTOR
PLUG ASY DIAGNOSTIC PORT











859318T 1 13C34 22.23
SmartCraft Yellow 10‑pin Terminator/Resistor 8M0046339 47C21 78.69
Provides CAN Bus termination for CAN P network. 10 pin diagnostic port for use on any SmartCraft application.
859318B 1 12C17 20.28 Used as a 10 pin diagnostic port for connecting Mercury Computer Diagnostic
System (CDS) junction box connection. Typically gets mounted at the helm, out of
SmartCraft Yellow Junction Box Terminator/Resistor line of sight so that a technician does not have to disassemble helm to plug into a
Provides CAN Bus termination where installed 10 pin connection. Requires a harness from back of diagnostic port to a 10 pin
Priced individually, sold @ multiples of 24 SmartCraft connection in the rigging.
TERMINATOR ASSEMBLY J-BOX Y HARNESS




84-8M0165555 39C24 65.39
J‑BOX Y HARNESS
5-WAY J-BOX KIT W/3 WEATHER CAPS




8M0055652 16C53 27.54 98-8M0165557
SmartCraft Red Terminator Can 1/P & H 5‑WAY J‑BOX KIT w/3 WEATHER CAPS
RESISTOR- TERMINATION- 2 PIN 5-WAY J-BOX KIT @ 24 KIT




8M0175293
5‑WAY J‑BOX KIT @ 24 Kit
J-BOX STACKING PLUG KIT



893388A01 11C26 18.76 23-8M0174363
Blue 2‑pin terminator/resistor J‑BOX STACKING PLUG KIT. J‑BOX Stacking Plug designed for easily vertical
Provides CAN bus termination for CAN Networks. stackability of J‑Boxes, allows for all plugs to be positioned on one side






566 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


BLUE CAN P RESISTOR 1ST MATE SAFETY & SECURITY SYSTEM - MERCURY
SMARTCRAFT TRIPLE ENGINE KIT



82-8M0171627 19C85 33.08
BLUE CAN P RESISTOR CONTROLS AND RIGGING
SECURITY SYSTEMS

This section will include security devices that will help protect your
engine against theft.. 98-8M6007937 710A01 1014.30
1st Mate Safety & Security System is an engine integrated wireless man overboard
(MOB) and theft deterrent system.
1ST MATE SAFETY & SECURITY SYSTEM - MERCURY
SMARTCRAFT SINGLE ENGINE KIT 1st Mate has three main features:
1. Wireless MOB (man overboard) monitoring for the captain and up to 7 additional
passengers (passenger wearables sold separately)
2. Distress Messaging texts that provide location, date and time via cellular on the
mobile device to emergency contacts set up in the app
3. Theft Deterrent capability that prevents the engines from starting unless
unlocked with proximity of the Captain's wearable and/or unocking the vessel
through the 1st Mate app (PIN, fingerprint, face recognition).Triple Engine Kit
contains these components: intelligent hub and harness, one RFID tag, and one
Captain's wearables fob kit (Captain's fob and the red wristband and carabiner clip
wearables)
Triple engine use on Mercury SmartCraft engine applications. Visit
www.1stMate.net to get all the latest details
98-8M6007933 568A27 811.81 1ST MATE SAFETY & SECURITY SYSTEM - MERCURY
1st Mate Safety & Security System is an engine integrated wireless man overboard SMARTCRAFT 4/5/6 ENGINE KIT
(MOB) and theft deterrent system.
1st Mate has three main features:
1. Wireless MOB (man overboard) monitoring for the captain and up to 7 additional
passengers (passenger wearables sold separately)
2. Distress Messaging texts that provide location, date and time via cellular on the
mobile device to emergency contacts set up in the app
3. Theft Deterrent capability that prevents the engines from starting unless
unlocked with proximity of the Captain's wearable and/or unocking the vessel
through the 1st Mate app (PIN, fingerprint, face recognition).
Single Engine Kit contains these components: intelligent hub and harness, one 98-8M6007938 994A02 1420.03
RFID tag, and one Captain's wearables fob kit (Captain's fob and the red wristband 1st Mate Safety & Security System is an engine integrated wireless man overboard
and carabiner clip wearables) (MOB) and theft deterrent system.
Single engine use on Mercury SmartCraft engine applications. Visit
www.1stMate.net to get all the latest details 1st Mate has three main features:
1. Wireless MOB (man overboard) monitoring for the captain and up to 7 additional
1ST MATE SAFETY & SECURITY SYSTEM - MERCURY passengers (passenger wearables sold separately)
SMARTCRAFT DUAL ENGINE KIT 2. Distress Messaging texts that provide location, date and time via cellular on the
mobile device to emergency contacts set up in the app
3. Theft Deterrent capability that prevents the engines from starting unless
unlocked with proximity of the Captain's wearable and/or unocking the vessel
through the 1st Mate app (PIN, fingerprint, face recognition).
4/5/6 Engine Kit contains these components: intelligent hub and harness, one RFID
tag, and one Captain's wearables fob kit (Captain's fob and the red wristband and
carabiner clip wearables)
4/5/6 engines on Mercury SmartCraft engine applications. Visit www.1stMate.net
to get all the latest details
1ST MATE CAPTAIN'S WEARABLE FOB KIT
98-8M6007934 639A01 912.87
1st Mate Safety & Security System is an engine integrated wireless man overboard
(MOB) and theft deterrent system.
1st Mate has three main features:
1. Wireless MOB (man overboard) monitoring for the captain and up to 7 additional
passengers (passenger wearables sold separately)
2. Distress Messaging texts that provide location, date and time via cellular on the
mobile device to emergency contacts set up in the app
3. Theft Deterrent capability that prevents the engines from starting unless
unlocked with proximity of the Captain's wearable and/or unocking the vessel
through the 1st Mate app (PIN, fingerprint, face recognition).
Dual Engine Kit contains these components: intelligent hub and harness, one RFID 98-8M6007943 127A79 182.56
tag, and one Captain's wearables fob kit (Captain's fob and the red wristband and 1st Mate Safety & Security System ‑ Captain's wearable fob kit contains the
carabiner clip wearables) Captain's fob along with the red wristband and carabiner clip wearables for
Dual engine use on Mercury SmartCraft engine applications. Visit retaining the fob.
www.1stMate.net to get all the latest details For use with any 1st Mate Safety & Security System. Only 1 Captain's fob and up
to 7 additional passenger fobs can be in use simultaneously. However, up to 3
Captain's fobs can be paired to a vessel.



2021 Canada Accessories Guide 567

ELECTRICAL


1ST MATE PASSENGER'S WEARABLE FOB KIT 1ST MATE CAPTAIN'S WEARABLE FOB KIT
CONTROLS AND RIGGING









182.65
98-8M6007944
127A85
127A79
98-8M6007947
1st Mate Safety & Security System ‑ Passenger's wearable fob kit contains the 1st Mate Safety & Security System ‑ Captain's wearable fob kit contains the 182.56
Passenger's fob along with the black wristband and carabiner clip wearables for Captain's fob along with the blue wristband and carabiner clip wearables for
retaining the fob. retaining the fob.
For use with any 1st Mate Safety & Security System. Up to 7 additional passenger For use with any 1st Mate Safety & Security System. Only 1 Captain's fob and up
fobs can be in use simultaneously on one vessel. to 7 additional passenger fobs can be in use simultaneously. However, up to 3
Captain's fobs can be paired to a vessel.
1ST MATE SAFETY & SECURITY SYSTEM - SINGLE
ENGINE KIT 1ST MATE PASSENGER'S WEARABLE FOB KIT







98-8M6007948 127A79 182.56
1st Mate Safety & Security System ‑ Passenger's wearable fob kit contains the
Passenger's fob along with the black wristband and carabiner clip wearables for
98-8M6007939 568A01 811.44 retaining the fob.
1st Mate Safety & Security System is an engine integrated wireless man overboard For use with any 1st Mate Safety & Security System. Up to 7 additional passenger
(MOB) and theft deterrent system. fobs can be in use simultaneously on one vessel.
1st Mate has three main features: 1ST MATE RED WEARABLES KIT
1. Wireless MOB (man overboard) monitoring for the captain and up to 7 additional
passengers (passenger wearables sold separately)
2. Distress Messaging texts that provide location, date and time via cellular on the
mobile device to emergency contacts set up in the app
3. Theft Deterrent capability that prevents the engines from starting unless
unlocked with proximity of the Captain's wearable and/or unocking the vessel
through the 1st Mate app (PIN, fingerprint, face recognition).
Single Engine Kit contains these components: intelligent hub and harness, one
RFID tag, and one Captain's wearables fob kit (Captain's fob and the blue
wristband and carabiner clip wearables)
Single engine use on All Leading Engine Brands (Mercury SmartCraft engine
applications have a specific set of SKUs to gain additional integrated functionality). 98-8M6007945 35A49 50.70
Visit www.1stMate.net to get all the latest details
1st Mate Safety & Security System ‑ Lost a 1st Mate wearable or prefer a different
1ST MATE SAFETY & SECURITY SYSTEM - DUAL/ color? Red wearables kit contains the red wristband and carabiner clip for retaining
TRIPLE ENGINE KIT a 1st Mate fob. Kit does not include a fob.
98-8M6007940 674A51 963.59 For use with any 1st Mate fob
1st Mate Safety & Security System is an engine integrated wireless man overboard 1ST MATE BLUE WEARABLES KIT
(MOB) and theft deterrent system.
1st Mate has three main features:
1. Wireless MOB (man overboard) monitoring for the captain and up to 7 additional
passengers (passenger wearables sold separately)
2. Distress Messaging texts that provide location, date and time via cellular on the
mobile device to emergency contacts set up in the app
3. Theft Deterrent capability that prevents the engines from starting unless
unlocked with proximity of the Captain's wearable and/or unocking the vessel
through the 1st Mate app (PIN, fingerprint, face recognition).
Dual/Triple Engine Kit contains these components: intelligent hub and harness, one
RFID tag, and one Captain's wearables fob kit (Captain's fob and the blue
wristband and carabiner clip wearables) 98-8M6007932 35A49 50.70
Dual/Triple engine use on All Leading Engine Brands (Mercury SmartCraft engine 1st Mate Safety & Security System ‑ Lost a 1st Mate wearable or prefer a different
applications have a specific set of SKUs to gain additional integrated functionality). color? Blue wearables kit contains the blue wristband and carabiner clip for
Visit www.1stMate.net to get all the latest details retaining a 1st Mate fob. Kit does not include a fob.
For use with any 1st Mate fob






568 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


1ST MATE BLACK WEARABLES KIT CONTROL MODULE THEFT - MERCURY TDS











98-8M6007946 35A49 50.70 CONTROLS AND RIGGING
1st Mate Safety & Security System ‑ Lost a 1st Mate wearable or prefer a different 8M0056987 313C61 522.69
color? Black wearables kit contains the black wristband and carabiner clip for
retaining a 1st Mate fob. Kit does not include a fob. Control Module that communicates information as part of the Mercury TDS (Theft
Deterrent System) Service replacement part
For use with any 1st Mate fob
Used in kit 8M0057383 See Kit for applications
MERCURY THEFT DETERRENT SYSTEM (TDS) STAGE 1 FOB -MERCURY TDS (THEFT DETERRENT SYSTEM)












8M0057383 625C62 1042.69 8M0056988 65C08 108.48
Mercurys TDS improves boat and engine security and provides owner ease of Fob replacement kit to activateTheft Deterrent System as part of the Mercury TDS
mind. The system immobolizes the engine until the Fob is inserted. (Limit to
approximately 2000 RPM) Once the Fob is inserted into the docking station; the (Theft Deterrent System) Service replacement part
user will experience normal engine performance. Red or green lights on the Used in kit 8M0057383 See Kit for applications
docking station indicates lock or unlock condition. DOCKING STATION - THEFT - MERCURY TDS
Can be used on ALL SmartCraft capable engines 40 HP and above (40‑60 4
stroke engines serial # 1C173334) all MCM DTS (2007 and newer ‑ serial
#1B381712) as well as Racing DTS (need Version 77 or newer MicroChi)
MERCURY TDS- PREMIUM









8M0056994 253C34 422.23
Docking station that communicates information as part of the Mercury TDS (Theft
Deterrent System) Service replacement part
Used in kit 8M0057383 See Kit for applications
98-8M0065146 3696A66 5280.94
Kit that allows tracking of a boat using a satellite communication system. This WIRING HARNESS - THEFT - MERCURY TDS
system notifies the owner via email or text if the boat has left its location or
exceeded the user definiable Geo Fence (which can be set to notify if it leaves a
known good area or notify it it enters a known bad area). It also allows you to use
a unique website that you can track the boat. Included in the kit is the immobilizer
that limits power if the fob is not engaged. (includes both the 8M0057383
Immobilizer kit and the 8M0059374 Premium Satelite Tracking Kit). System is CE
certified and can be installed in Europe.
Can be used on all 40‑60 4 stroke engines (serial # break is 1C173334) and the
new 150 4 Stroke engine. Can also be used on Verado and all MCM DTS 2007
( serial number 1B381712 and above) and newer as well as Racing DTS .
( Need Version 0077 Micro Chi or later)
84-8M0056993 66C42 110.69
Service replacement part.
Main harness that connects docking station and module as part of the Mercury
TDS (Theft Deterrent System)
Used in kit 8M0057383 See Kit for applications








2021 Canada Accessories Guide 569

ELECTRICAL


BEZEL ADHESIVE PAD , OVAL 25C89 43.15
CONTROLS AND RIGGING Adhesive oval pad (GPS) used in the Mercury TDS ‑ Premium security system.
8M0059438

Mercury TDS ‑ Premium Kits
POWER HARNESS





8M6002359 19C07 31.76
Chrome ‑ 52 mm
Fits small 2‑1/8 in.(52 mm) O.D. SC100 System Link gauges
Priced individually, sold @ multiples of 2
MODULE AND SOFTWARE
84-8M0059434 169C37 282.29
Power cord used in the Mercury TDS ‑ Premium security system.
Mercury TDS ‑ Premium Kits
J-BOX EXTENSION






8M0059432 3959A58 5656.54
Module with software used in the Mercury TDS ‑ Premium security system.
Mercury TDS ‑ Premium Kits
IRIDIUM SATELLITE ANTENNA
84-8M0059435 112C13 186.87
J‑Box extension used in the Mercury TDS ‑ Premium security system.
Mercury TDS ‑ Premium Kits
OUTBOARD MOTOR LOCK - BASIC






8M0059430 205C90 343.16
Iridium Satellite antenna used in the Mercury TDS ‑ Premium security system.
Mercury TDS ‑ Premium Kits
ADHESIVE PAD, SQUARE
67-8M0054123 26C23 43.73
8M0059439 25C89 43.15 Outboard Motor Lock for added security and protection for your Outboard.
Adhesive square (Iridium) used in the Mercury TDS ‑ Premium security system. Features heavy carbon steel desing, recessed solid brass lock and noise
dampening to reduce rattle.
Mercury TDS ‑ Premium Kits Good security protection at a good value.
GPS ANTENNA Outboards that use turnbuckle (thumb screw) mounting bolts












8M0059429 160C88 268.14
GPS antenna used in the Mercury TDS ‑ Premium security system.
Mercury TDS ‑ Premium Kits

570 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


OUTBOARD MOTOR LOCK - HIGH SECURITY LIGHT - DASH MOUNTED - CATALYST MALFUNCTION CONTROLS AND RIGGING












67-8M0054122 110C78 184.64 8M0046481 23C28 38.80
High Strength Outboard Motor Lock for added security that fits most turnbuckle Light will go on indicating that a malfunction has ocurred with your catalyst on your
design bolts. This kit features anti drill protection from the hardened case, polished engine. This means you will need to get your engine serviced soon. Works similar
316 stainless steel , noise dampening to reduce rattle and 2 security keys that can to your check Engine light in your truck or car. (harness to be sold seperately)
not be duplicated. Harness numbers for single helms
Outboards that use the turnbuckle (thumb screw) mounting bolts. (M0048049,8M0048054,8M0048055,8M0048056,8M0048057,
8M0048058,8M0048059 )
OUTBOARD MOTOR LOCK - TRANSOM Mercruiser products that are equipped with a catalyst
OBDM ADAPTER HARNESS (EC)









67-8M0054121 55C34 92.25
High Strength Outboard Motor Lock for added security and protection for your
Outboard. Features 2 security keys that can not be duplicated, Anti‑Drill hardened
material to make it harder to saw or drill thru and will fuit up to 1/2 inch (12 MM)
engine bolts 84-8M0053083 30C39 50.65
Outboards that use transom mounted bolts Adapter harness for installation of the OBDM light kit
This adapter is needed for EC engines prior to the base engine harness change.
SAFETY SYSTEMS 3.0 Alpha MPI EC ( serial number 1A610609 and below), 5.0 Brave DTS MPI EC
( serial number 1A612238 and below), 5.0 Alpha MPI EC (serial number 1A610409
and below),350 Mag Bravo EC (serial number 1A610686 and below) and 350 Mag
WARNING HORN KIT Bravo DTS EC (serial number 1A610698)
HARNESS - MALFUNCTION LIGHT











816492A 9 45C55 75.91
Kit includes the new style piezo horn used with 1986 and newer remote controls 84-8M0048049 12C93 21.55
and wiring harnesses. This harness is to connect the OBDM malfunction light for single helm applications.
Fits 2000 and newer Mercury/Mariner V‑6 outboards. Also fits MY2002 and newer 10 ft.
525‑1200 Hp. Race Sterndrives.
All Mercruiser engines that have a catalyst
84-8M0048054 14C67 24.44
This harness is to connect the OBDM malfunction light for single helm applications.
15 ft.
All Mercruiser engines that have a catalyst
84-8M0048055 16C40 27.32
This harness is to connect the OBDM malfunction light for single helm applications.
20 ft.
All Mercruiser engines that have a catalyst
84-8M0048056 18C11 30.18
This harness is to connect the OBDM malfunction light for single helm applications.
25 ft.
All Mercruiser engines that have a catalyst
84-8M0048057 19C83 33.05
This harness is to connect the OBDM malfunction light for single helm applications.
30 ft.
All Mercruiser engines that have a catalyst

2021 Canada Accessories Guide 571

ELECTRICAL


84-8M0048058 23C07 38.45 MOVING PROP ALERT LIGHT SYSTEM - OVAL
This harness is to connect the OBDM malfunction light for single helm applications.
CONTROLS AND RIGGING This harness is to connect the OBDM malfunction light for single helm applications.
40 ft.
All Mercruiser engines that have a catalyst
27C86
84-8M0048059
46.42
50 ft.
All Mercruiser engines that have a catalyst
HARNESS - MALFUNCTION LIGHT


8M0109507 300C85 501.43
Moving Prop (MP Alert) Alert Light system is a highly visible light system that
provides additional notice to swimmers when the engine is running and the
propeller is in motion. This kit is a two light kit that includes the smart lights with 6
LED lights each , a control module (connected to the engine computer) and a 20 ft
wiring harness (other lengths available). Also included is hardware needed to
mount the light. Additional lights can be purchased to add to the system. (Oval
Shape)
Works with all SmartCraft compatible engines.
84-8M0048040 19C89 33.14 MP ALERT - ADD A LIGHT
This harness is to connect the OBDM malfunction light for dual helm applications.
10 ft.
All Mercruiser engines that have a catalyst
84-8M0048043 21C62 36.04
This harness is to connect the OBDM malfunction light for dual helm applications.
15 ft.
All Mercruiser engines that have a catalyst
84-8M0048044 23C28 38.80
This harness is to connect the OBDM malfunction light for dual helm applications.
20 ft.
All Mercruiser engines that have a catalyst
84-8M0048046 28C13 46.87 8M0109505 83C70 139.50
This harness is to connect the OBDM malfunction light for dual helm applications. This kit will allow you to add additional lights to the MP Alert kits. Each kit includes
30 ft. one light and a Y harness to allow you to easily add a third or forth light on the
All Mercruiser engines that have a catalyst boat. (Oval Shape)
84-8M0048047 31C28 52.14 Works with all SmartCraft compatible engines.
This harness is to connect the OBDM malfunction light for dual helm applications.
40 ft. MP ALERT LIGHT
All Mercruiser engines that have a catalyst
84-8M0048048 34C46 57.43
This harness is to connect the OBDM malfunction light for dual helm applications.
50 ft.
All Mercruiser engines that have a catalyst
MOVING PROP ALERT LIGHT SYSTEM - OVAL




8M0109506 77C32 128.85
Service replacement light for the MP Alert kit (Oval Shape)
MP ALERT - OVAL STAINLESS BEZEL




8M0109508 310C36 517.26
Moving Prop (MP Alert) Alert Light system is a highly visible light system that
provides additional notice to swimmers when the engine is running and the
propeller is in motion. This kit is a two light kit that includes 2 smart lights with 6
LED lights, a control module (connected to the engine computer) and a 20 ft wiring
harness (other lengths available). Also included is hardware needed to mount the
lights. Additonal lights can be purchased to add to the system. (Oval Shape)
Analog Engine / Non Mercury engines (Single Engines Only)
8M0072341 10C25 17.06
Stainless bezel to be used for any oval MP Alert light
Can be used on any of the new cowl‑mounted oval MP Alert options for the 3.4L
V6/4.6L V8 Fourstrokes



572 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


MP ALERT - OVAL WARM FUSION BEZEL HARNESS EXTENSION MP ALERT












8M0138978 45C41 75.67 CONTROLS AND RIGGING
Warm Fusion bezel to be used for any oval MP Alert light 84-8M0054183 18C66 31.11
Should be used on warm fusion cowl‑mounted oval MP Alert options for the 3.4L Harness for connecting MP Alert light to front of boat ‑ 10 ft
V6/4.6L V8 Fourstrokes 84-8M0054185 27C03 45.05
MODULE, MP ALERT Harness for connecting MP Alert light to front of boat ‑ 20 ft
84-8M0054186 31C96 53.26
Harness for connecting MP Alert light to front of boat ‑ 30 ft
84-8M0054187 45C83 76.37
Harness for connecting MP Alert light to front of boat ‑ 50 ft

TACHOMETER HARNESSES
TACHOMETER HARNESS



8M0117114 150C01 250.01
Module used to control the lights on MP Alert.
Controller is used with MP Alert light system on SmartCraft applications. Also can
turn on/off with SkyHook feature on Joystick applications
8M0117116 145C45 242.41
Module used to control the lights on MP Alert.
Used with MP Alert light system (controller) Analog and Non‑Mercury Engines
LIGHT SWITCH WITH LED - MP ALERT
84- 46239A 1 34C37 57.28
Three blade style. Used with 61490A__ series controls and ignition/Choke panels
77777A 2 and A 4.
TACHOMETER HARNESS








8M0052292 29C28 48.80
Optional switch and warning light kit for the MP Alert Light System. This switch can
be added to the system to control the on‑off function manually.
Works with all SmartCraft compatible engines.
MP ALERT - Y HARNESS 84- 69108A 5 25C79 42.99
Four pin style. Used with 84‑87364A__ series harnesses, 65640A__ series
controls and 76334A__ series controls.
TACHOMETER HARNESS









84-8M0053250 24C55 40.94
Y Harness for MP Alert to allow easy installation of third or forth light on the boat.
Works with any SmartCraft compatible engine.
84- 86396A 8 37C14 61.89
Five pin style. 4 ft.(1.2 m). Used with Commander, Commander 2000 series & MSC
4000 (8 pin) series side mount controls and Ignition/Choke assemblies.

2021 Canada Accessories Guide 573

ELECTRICAL


84- 17829A20
84- 86396A24 37C26 62.10 20 ft.(6.1 m) harness, 8 lead harness. 94C27 157.13
Five pin style. 13 ft.(4 m). Used with Commander, Commander 2000 series & MSC
CONTROLS AND RIGGING TACHOMETER HARNESS TWO STATION Y-HARNESSES
Used as harness extension or to complete two station installations.
4000 series side mount controls and Ignition/Choke assemblies.
For boats with two station applications.

POWER TRIM "Y" HARNESS






84-827593A 2 29C11 48.52
Bullet pin style.
Fits Mercury/Mariner 30 to 90 electric start tiller handle models.
REMOTE CONTROL ADAPTER HARNESSES
58366T 2 55C04 91.75
REMOTE CONTROL ADAPTER HARNESS Used with Trim Control Panels and Extension Harnesses (46838__ series.
Fits MCM engines and Mercury/Mariner outboards with power trim.
TWO STATION "Y" HARNESS











84-892473A01 65C73 109.55
Converts the traditional Mercury connector to an Amp 8‑pin connector.
Converts side mount controls 881170A 3, 15, 16 and the 816626A_ series ignition 84- 91942A 4 290C67 484.44
keyswitch harness to connect to the MY2005 and newer 8/9.9 hp. FourStroke
outboard. Used with Instrument Harness (84‑812475A3 or 84‑812476A 3), Instrument
MY2005 and newer 8/9.9 hp. FourStroke outboard and the 15/20 hp. FourStroke Extension Harness (84‑812441A__ series or 84‑812835A__ series), Stop/Start
Panel (76426A 9) and Ignition Switch (54212A 7). Includes two station sending
(351cc) outboard when a 8 pin side mount control or keyswitch harness is used. units.
Fits 1986 and newer MCM/MIE gasoline engines and 1994 and newer MCM/MIE
REMOTE CONTROL/IGNITION CHOKE EXTENSION diesel engines (except D‑Tronic D2.8L,D4.2L and D7.3L diesels).
HARNESSES TWO STATION "Y" HARNESS

Fits Mercury / Mariner 6 hp. and Higher (2 cycle, USA & BEL Origin)
outboards, Mariner 30/40 hp. with oil injection (2 cycle, Japanese
Origin), all Mercury / Mariner 4‑Stroke (USA Origin) outboards and
Force 40 hp. and Higher (1993 and Newer). Various applications
include 7,8 and 10 pin harnesses and 12 wire (8 pin plus 4 bullet
connectors) used on side mount controls and ignition/choke assemblies.
EXTENSION HARNESS



84- 93347A 3 90C22 150.36
38 in.(96 cm) harness. Used with Ignition/Choke Assembly (84‑816626A 2), Start/
Stop Panel (76426A 7) and Remote Control Extension Harness (84‑17829A__
series).
Fits Mercury/Mariner outboards with 8 pin engine harnesses.




84- 17829A 2 48C22 80.37
2 ft.(0.6 m) harness, 8 lead harness.
Used as harness extension or to complete two station installations.
84- 17829A10 75C54 125.89
10 ft.(3.05 m) harness, 8 lead harness.
Used as harness extension or to complete two station installations.

574 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


TWO STATION "Y" HARNESS TWO STATION START/STOP PANELS

Mounts in a 3‑3/8 in.(86 mm) hole.

TWO STATION START/STOP PANEL CONTROLS AND RIGGING






84-850782 1183A98 1691.39
Fits 1997‑2000 D2.8L and D4.2L Electronic models
DUAL STATION SENDERS
76426A 9 94C86 158.10
Replaces factory installed sender on engine. For use with dual station 3 ft.(910 mm) harness connects in place of ignition switch.
instrumentation. Fits MCM/MIE gasoline Carb engines (0W650000 and below).
8M0078892 61C13 101.88
ENGINE OIL PRESSURE SENDER
3 ft.(910 mm) harness connects in place of ignition switch.
Used on Outboard installations that have Mechanical Non DTS requirements for
Remote Start/Stop. Uses 6 Pin connection and services second station
installations. Similar to 76426A 9 MCM version.
POWER TRIM CONTROL PANELS

DUAL ENGINE POWER TRIM CONTROL




37293T 139C52 232.53
Fits MCM/MIE gasoline engines
ENGINE WATER TEMPERATURE SENDER




90362A 3 535C17 891.94
49734 61C46 102.44 Toggle switch style with 20 ft.(6.1 m) harness and circuit control box. Mounts in a
For dual station installations, used for temperature gauge 3‑3/8 in.(86 mm) hole. Designed for dual engine installations equipped with
Fits MCM/MIE engines externally mounted tie bars. Simultaneously tilts both drives with a single toggle
switch.
ENGINE OIL PRESSURE SENDER Fits Alpha & Bravo sterndrives that are not equipped with Auto Trim.
TRIM SWITCHES

POWER TRIM SWITCH KIT








87-805268 30C25 50.42
For dual station installations
Fits 1994 and newer MCM/MIE Diesel engines

87- 18286A46 97C38 162.31
Rocker switch style with 25 ft.(7.62 m) harness and bullet connectors. Can be
surface mounted or flush mounted. Provides tilt control from the bow or transom
location.
Fits Mercury/Mariner 75‑115 hp. FourStroke outboards beginning with serial
number 1B366823‑2B094955.





2021 Canada Accessories Guide 575

ELECTRICAL


DASH MOUNT TRIM PAD - DTS TRIPLE ENGINES BEZEL
CONTROLS AND RIGGING










87-897635K01 273C09 455.14 879315T08 11C80 19.68
Dash Mounted Trim Switch for Triple Engine DTS applications White
2006 DTS engines and newer Trim switch, triple/quad.
TRIM PAD - DTS DUAL ENGINES BEZEL












87-879303A02 213C89 356.49 879315T09 17C69 29.49
Low profile mount trim pad for dual engine applications Chrome
Gen1 (2007 and newer) DTS Dual engines Trim switch, triple/quad.
TRIM PAD - DTS TRIPLE ENGINES BEZEL













87-879303A03 282C93 471.55 879315T05 12C00 20.00
Low profile mount trim pad for triple engine applications Grey
Gen I (2007 and newer) DTS triple engines Trim switch, triple/quad.
TRIM PAD - DTS QUAD ENGINES BEZEL













87-879303A04 318C93 531.54 879315T07 22C76 37.94
Low profile mount trim pad for quad engine applications Black
Gen I (2007 and newer) DTS Quad engines Trim switch, triple/quad.










576 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


AUXILIARY TRIM HARNESS TRIM ALL - HARNESS ADAPTOR








84-8M0163379 59C07 98.46 CONTROLS AND RIGGING
TRIM ALL ‑ HARNESS ADAPTOR
4 POSITION TRIM SWITCH ADAPTER
84-895388T02 30C73 51.21
Allows connection of trim wires for use of a helm trim lever or secondary trim
device.
2004 and newer DTS engines with panel mount remote control
BOW TRIM HARNESS






84-896394T01 66C13 110.22
Used with all dash mounted triple and quad trim switches to adapt to Zero Effort
Controls
Triple/Quad engines
2006 / 2007 (Gen II) DTS engines
84-8M0169506 47C58 79.30 TRIM ADAPTOR - PADDLE / BLINKER TRIM - ZE
Allows connection of trim wires for use of a bow mounted trim button. Harness
runs from bow trim switch to engine cowl trim switch.
2004 and newer DTS engines
HARNESS-AUXILIARY DASH SWITCH- DUALS






84-8M0163378 18C87 31.45
TRIM ADAPTOR ‑ PADDLE / BLINKER TRIM ‑ ZE
TRIM ADAPTOR - PADDLE / BLINKER TRIM - STD


84-866704T01 41C27 68.79
This harness allows the connection to a auxiliary trim switch.
Mounts between the 8 pin trim connector and the command module harness 84-8M0165559 18C29 30.48
DTS engines TRIM ADAPTOR ‑ PADDLE / BLINKER TRIM ‑ STD
TRIM ALL ADAPTER HARNESS TRIM ADAPTOR (8-PIN TO 3-PIN)











84-8M0163380 10C48 17.47
TRIM ADAPTOR (8‑PIN TO 3‑PIN)
84-8M0094269 66C92 111.53
Harness allows for use of "trim all" switch on dual console ERCs when retrofitting
with previous generation helm harnessing
Should only be used in a repower situation where "trim all" handle switch in dual
ERC does not match up with existing DTS helm harnessing





2021 Canada Accessories Guide 577

ELECTRICAL


TRIPLE ENGINE TRIM HARNESS KIT-DTS TRIM LIMIT KITS
CONTROLS AND RIGGING TRIM LIMIT SWITCH KIT
Trim limit kits available to adjust trim up limits









84-895744A02 101C79 169.64
Allows connection of multiple DTS engines to trim switches (triple engine with Zero
Effort Controls‑included in kit)
QUAD ENGINE TRIM HARNESS KIT-DTS
899625K02 67C30 112.18
Limits the up travel of the power trim to minimize potential interferences when fully
tilted. This is an analog device.
Fits the Mercury/Mariner Opti Max 1.5L (75‑115), 2.5L (135,150,175 and 3.0L
(200‑300) Can also be used in 75‑115hp 1.7L 4‑stroke engines (Serial number
1B366823‑2B094955.)
TRIM LIMIT SWITCH KIT




84-895744A04 118C69 197.80
Allows connection of multiple DTS engines to trim switches (Quad engines with
Zero Effort Controls‑included in kit)
ZERO EFFORT TRIM ADAPTER HARNESS



899625K04 79C90 133.18
Limits the up travel of the power trim to minimize potential interferences when fully
tilted. This is a digital device.
Fits the Mercury/Mariner Opti Max 1.5L (75‑115), 2.5L (135,150,1750 and 3.0L
(200‑250) Can also be used in 75‑115 4 stroke engines (Serial number 1B366823
and above. (ref 14 Pin Harness)
TRIM LIMIT SWITCH KIT


84-8M0109408 11C41 19.02
Included in Race Rigging Kits.
Required for any newer style Zero Effort control with 8 pin Trim All connector.
Harness is 8 pin Zero Effort to bullet connectors
DUAL ENGINE ZERO EFFORT 8 PIN TRIM ALL
HARNESS



899625K05 80C38 133.96
Limits the up travel of the power trim to minimize potential interferences when fully
tilted. This is an digital device.
Fits the Mercury Verado 4 cylinder (135‑175)




84-8M0047784 61C52 102.55
Harness that provides individual bullet drops for rocker switches from the 8 pin
Trim All connector on the newer Zero Effort remote controls
Connects a dual engine Zero Effort control with the newer 8 pin Trim All connector
to individual rocker switches via bullets






578 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


TRIM LIMIT SWITCH KIT TRIM LIMIT SWITCH KIT CONTROLS AND RIGGING












899625K06 80C18 133.62 8M0059532 66C28 110.45
Limits the up travel of the power trim to minimize potential interferences when fully Limits the up travel of the power trim to minimize potential interferences when fully
tilted. This is an digital device. tilted. This is an digital device.
Fits the Mercury Verado 6 cylinder (200‑275) Fits the 150 HP 4 Stroke only
TRIM LIMIT SWITCH KIT
TRANSOM MOUNTED POWER TILT PANEL
TRANSOM MOUNTED POWER TILT PANEL









899625K07 79C18 131.98
Limits the up travel of the power trim to minimize potential interferences when fully
tilted.
Fits the Mercury/Mariner 90 HP 2 cycle outboard 87-815200A 1 67C30 112.18
899625K08 95C03 158.36 Rocker switch style with 6 ft.(1.8 m) harness and bullet connectors. Provides tilt
Limits the up travel of the power trim to minimize potential interferences when fully control from the outside of the boat when trailering and launching. "T" harness
tilted. (included in kit) connects directly to trim pump with traditional 3 blade connector.
Fits the Mercury/Mariner 40‑60 4 Stroke outboard Fits MCM models with power trim having the traditional 3 blade connector.
TRIM CONVERTER AND TILT UP LIMIT KIT TRANSOM MOUNTED POWER TILT PANEL












8M0118725 95C32 158.86 87-815200A02 56C22 93.71
This kit allows the conversion of the trim signal from the analog sender to a digital Rocker switch style with 6 ft.(1.8 m) harness and bullet connectors. Provides tilt
output for Smartcraft gauge applications. The kit also has an additional feature that control from the outside of the boat when trailering and launching. "T" harness
(included in kit) connects directly to trim pump with 3 pin Packard connector.
allows the max tilt up positon to be set to avoid interference when tilting the engine
completely up. Fits MCM models with newer power trim having the 3 pin Packard connector.
2.1L F75‑115 Four Stroke


















2021 Canada Accessories Guide 579

ELECTRICAL


OUTBOARD POWER TRIM SWITCH KITS POWER TRIM SWITCH KIT
CONTROLS AND RIGGING
POWER TRIM SWITCH KIT









87- 18286A46 97C38 162.31
Rocker switch style with 25 ft.(7.62 m) harness and bullet connectors. Can be
surface mounted or flush mounted. Provides tilt control from the bow or transom
87- 14645A 4 133C41 222.35 location.
Toggle switch style. Tiller handle mounted. Fits Mercury/Mariner 75‑115 hp. FourStroke outboards beginning with serial
Fits Mercury/Mariner 40 JET and 50/60 hp. outboards and operates the power trim number 1B366823‑2B094955.
kit added to a base ELHO model engine. See Tiller application chart for specific
engine models. POWER TRIM SWITCH KIT
POWER TRIM SWITCH KIT










87- 18286A19 96C24 160.40
Rocker switch style with 25 ft.(7.62 m) harness and bullet connectors. Can be
87- 18286A17 74C37 123.95 surface mounted or flush mounted. Provides tilt control from the bow or transom
Rocker switch style with 10 ft.(3.05 m) harness and 3 blade connector. Installation location.
requires power trim "Y" harness (58366A 2). Provides tilt control from the bow or Fits Mercury/Mariner models equipped with integral trim pump.
transom location.
Fits Mercury/Mariner models equipped with remote mounted trim pump. POWER TRIM SWITCH KIT
POWER TRIM SWITCH KIT











87- 18286A47 93C37 155.61
Rocker switch style with 10 ft.(3.0 m) harness and bullet connectors. Can be
87- 18286A18 91C45 152.43 surface mounted or flush mounted. Provides tilt control from the bow or transom
Rocker style switch with 10 ft. harness and bullet connectors. Can be surface location.
mounted or flush mounted. Provides tilt control from the bow or transom location. Fits Mercury/Mariner 75‑115 hp. FourStroke outboards beginning with serial
Fits Mercury/Mariner models equipped with integral trim pump. number 1B366823‑2B094955.
TRIM LIMIT SWITCH KIT












87-814407A 3 97C77 162.95
Kit includes a mercury switch to limit power trim travel and a new, shorter tilt
bracket.
Fits all Mercury/Mariner V‑6 outboard applications which use engine mounted
power trim solenoids.
580 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


TRIM SWITCH Y-HARNESS TROLL CONTROL KIT CONTROLS AND RIGGING












84-889295T 22C34 37.24 87-8M0083437 75C94 126.56
Allows for tee‑in of bow power trim switch with remote controls. RPM adjustment at your finger tips. This kit can be added to the Big Tiller
Fits the F75‑90‑115 hp. FourStroke outboard, 1B366823 and above. Mechanical without P/S as an option
TROLL CONTROL POWER TRIM EXTENSION HARNESSES

TROLL CONTROL- DASH MOUNTED- J BOX Plugs into remote control or trim panel with 3 blade connectors.
SMARTCRAFT INSTALLATIONS
POWER TRIM EXTENSION HARNESS












87-8M0083438 114C04 190.07
Troll Control will allow you to have the same functions that you get from the 46838A 4 36C60 60.98
SmartCraft Digital gauges and adjust the speed of the boat. By pushing the button 10 ft.(3.05 m) harness and 3 blade connectors.
up or down, you can feather your speed every 10 RPM. Go from idle to 1000 RPM
or anywhere in between. (some engine can actually go lower than idle (75‑115 4 Fits Mercury/Mariner and MCM models with power trim.
stroke(Walleye), 135‑200 HP Verado 4 cylinder and 3.0L Optimax) This kit will be 46838A 6 46C04 76.73
used in Smartcraft gauge installations that have a J Box installed. . RPM will 20 ft.(6.1 m) harness and 3 blade connectors. Note: Use with dual solenoid trim
reset to idle when more than 2‑3% movement occurs at the throttle (TPS) pump only.
Can be used with any Analog Gauge installation without a J Box. "Y" harness is Fits Mercury/Mariner and MCM models with power trim.
included in kit to connect to main engine hanress. This kit can be used with any
SmartCraft compatable Mercury Engine. POWER TRIM EXTENSION HARNESS
TROLL CONTROL- DASH MOUNTED- ANALOG
87-8M0083439 129C88 216.45
Troll Control will allow you to have the same functions that you get from the
SmartCraft Digital gauges and adjust the speed of the boat. By pushing the button
up or down, you can feather your speed every 10 RPM. Go from idle to 1000 RPM
or anywhere in between. (some engine can actually go lower than idle (75‑115 4
stroke(Walleye), 135‑200 HP Verado 4 cylinder and 3.0L Optimax) This kit will be
used in analog gauge installations. RPM will reset to idle when more than 2‑3%
movement occurs at the throttle (TPS)
Can be used with any Analog Gauge installation without a J Box. "Y" harness is
included in kit to connect to main engine hanress. This kit can be used with any
SmartCraft compatable Mercury Engine.
TROLL CONTROL Y HARNESS 84-817659T01 20C61 34.36
16 ft.(4.88 m) harness.
This harness connects the remote control 4 pin Molex connector to the traditional 3
blade Mercury pump trim pump connector.
MCM/MIE
84-881125A 1 26C74 44.58
24 ft.(4.88 m) harness.
This harness connects the remote control 4 pin Molex connector to the traditional 3
blade Mercury pump trim pump connector.
MCM/MIE


84-8M0042976 39C25 65.42
Y hareness allows you to connect direct to main engine harness and the Troll
Control kit without using a "J" box.
Used with Troll Control Kit 879365K08 (879365A08)



2021 Canada Accessories Guide 581

ELECTRICAL


POWER TRIM EXTENSION HARNESS POWER TRIM ADAPTOR HARNESSES
CONTROLS AND RIGGING
POWER TRIM ADAPTER HARNESS









84-865772T01 22C87 38.10
16 ft.(4.88 m) harness.
This harness connects the remote control 4 pin Molex connector to the newer
design 3 pin Packard pump trim pump connector.
MCM/MIE 84-865770A02 11C66 19.44
12 in.(305 mm) harness.
POWER TRIM EXTENSION HARNESS To convert older P/T pump with 3 blade connector to newer remote control harness
with 3 pin Packard connector.
POWER TRIM ADAPTER HARNESS









84-865772T02 24C14 40.24
24 ft.(4.88 m) harness.
This harness connects the remote control 4 pin Molex connector to the newer
design 3 pin Packard pump trim pump connector. 84-865771A02 11C66 19.44
MCM/MIE 12 in.(305 mm) harness.
To convert newer P/T pump with 3 pin Packard connector to older remote control
POWER TRIM EXTENSION HOSE/HARNESS KIT harness with 3 blade connector.
POWER TRIM EXTENSION HOSE/HARNESS KIT POWER TRIM POWER SUPPLY CABLE

Recommend by the ABYC for use with MerCruiser power trim pumps
installed in boats with batteries (or battery banks) rated more than 800
CCA or with a battery switch.
POWER TRIM CABLE ASSEMBLY






32-865384A01 169C77 282.95
Includes a 6 ft (1.8M) harness and 4 ft (1.2M) hoses
Fits 1983 and newer MCM models



84-889282A01 22C51 37.52
102 cm (48 in.), Sheathed w/o fuse

















582 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


POWER TRIM CABLE ASSEMBLY BATTERY MULTIPLE CONDUCTOR KIT (NO COVERS) CONTROLS AND RIGGING












84-889282A02 53C67 89.45
183 cm (72 in.), Fused and sheathed 898289T47 83C37 138.95
New Battery Bus Bar Kit allows multiple connection points that result in clean and
BATTERY CABLES direct connections for various electrical power needs. This will eliminate stacking
of ring terminals and reduce corrosion and loose connections resulting in poor or
faulty electrical connections.
BATTERY CABLE KIT Kit includes a 3/8 inch and a 5/16 inch mounting plate made of brass with all the
fasteners needed for multiple connections. This kit does not include plastic snap
on covers (ABYC compliant)
Any 12 Volt battery with 3/8 inch and 5/16 inch studs
BATTERY COVER - RED/POSITIVE







84- 88439A50 88C82 148.03
Pair of 12 ft.(3.7 m) cables, 1 red (+) Positive and 1 black ( ‑) Negative, 4 gauge
with ring terminals. This is an optional accessory kit and may not reflect the original
cables on your engine. For original manufactured service part replacement, the
Electronic Parts Catalog should always be used for each specific engine. For
alternate length cables, consult the approriate service manual. 898289045 7C79 12.96
Fits Mercury/Mariner outboard engines. Positive(Red) Snap on cover used with Battery Bus Bar kits
Any 12 volt battery that uses the new Bus Bar Kit
BATTERY BAR - MULTIPLE CONNECTOR BATTERY COVER - BLACK/NEGATIVE

BATTERY MULTIPLE CONDUCTOR KIT (WITH COVERS)










898289046 7C79 12.96
Negative (Black) Snap on cover used with Battery Bus Bar kits
Any 12 volt battery that uses the new Bus Bar Kit
898289Q45 89C73 149.54
New Battery Bus Bar Kit allows multiple connection points that result in clean and BATTERY PLATE - 3/8 INCH (WITH FASTENERS)
direct connections for various electrical power needs. This will eliminate stacking
of ring terminals and reduce corrosion and loose connections resulting in poor or
faulty electrical connections.
Kit includes a 3/8 inch and a 5/16 inch mounting plate made of brass with all the
fasteners needed for multiple connections. This kit also includes a positive (red)
and negative (black) cover that snaps to the plate and provides protection to the
battery connections. (ABYC compliant)
Any 12 volt battery that has a 3/8 inch and 5/16 inch pmounting stud





898289A71 34C06 56.74
Multiple Conductor Battery Plate 3/8 inch (with fasteners) Clean up your battery
solutions with direct isolated connections


2021 Canada Accessories Guide 583

ELECTRICAL


BATTERY PLATE - 5/16 INCH (WITH FASTENERS) BATTERY ISOLATOR STARTER CABLE
898289A48 47C27 78.78
CONTROLS AND RIGGING BATTERY ISOLATORS
Multiple Conductor Battery Plate with fasteners (No Covers)
Clean up your battery solutions with direct isolated connections


Multi‑battery drain occurs when there are two or more batteries in a
charging system. Without a battery isolator, accessories attached to one
battery will draw power from all other batteries in the circuit, leaving
them seriously rundown, or even dead. The Quicksilver Battery Isolator
is an electric current controlling device which isolates each battery in
the circuit. Each battery then discharges and charges accordingly.
Never does the load on one battery drain power from other batteries in 84-8M0045743 18C94 31.55
the system. Required in addition to the standard Battery Isolator Harness Kit.
Only required with the F75‑115 FourStroke outboard 1B366823‑2B094995.
BATTERY ISOLATOR - 80 AMP CABLE/FUSE ASY - 100 AMP -BATTERY ISOLATOR













87-8M6005583 138C94 231.57 84-898180K01 90C56 150.93
80 amp battery isolator. Ensure battery cables meet ABYC/CFR regulations. Improved heat handling capacity cable used with battery isolators and Verado kits
All MerCruiser and Outboard engines.
175HP+ KICKER ELECTRICAL KIT
BATTERY ISOLATOR - 200 AMP









8M0149838 210C55 350.92
This system allows you to run your kicker engine and use the power steering
system without your primary engine running. This system allows you to connect to
a deep cell battery (not your starter battery) and the system will provide normal
87-8M6005584 247C26 412.10 power steering from the wheel. The system will alert you when your auxiliary
200 amp battery isolator. Ensure battery cables meet ABYC/CFR regulations. battery is below 9.5 volts. This signal means that you must start your primary
All MerCruiser and Outboard engines. engine to change the battery system. This kit will save the starting battery for
primary starting use only. Must select the appropriate isolator and isolator cables
BATTERY ISOLATOR HARNESS KIT to be paired with this system, dependent on engine configuration.
175hp+ power steering systems with a kicker engine. 200‑350 Verado 2015 (Gen
5) and newer and all 175‑300hp 3.4L and 4.6L engines.
ELECTRICAL ISOLATOR KIT- DUAL OPTI AND 150
FOURSTROKE



8M0134605 384C13 640.21
Used to add Power steering option to Dual OptiMax or 150 FourStroke engines
Dual OptiMax or 150 FourStroke Engines
84-8M0094239 83C07 138.45 ELECTRICAL ISOLATOR KIT- TRIPLE OPTI AND 150
Allows the connection of any battery isolator to Mercury/Mariner outboard. Kit FOURSTROKE
includes a 10 gauge red cable (8 ft.[2.44 m] length) that connects from the
regulator output terminal to the battery isolator input terminal.
Fits Mercury/Mariner 50‑125 hp. (2000 & prior) with high output (16 amp.)
alternator and V‑6 models (1999 & prior) equipped with 40 amp. alternator or dual
20‑amp alternator systems and fits the F75‑115 hp. (2.1L) FourStroke and the
F150 EFI FourStroke outboard. Connections from battery isolator to the batteries 8M0134606
are not included. Used to add Power steering option to Triple OptiMax or 150 FourStroke engines
Triple OptiMax and 150 FourStroke Engines



584 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


BATTERY ISOLATION FOR KICKER APPLICATIONS

Kicker kits previously contained a battery isolator and associated cabling. While a battery isolator is still required for a kicker engine that is equipped
with power steering, these parts must be ordered separately.
Isolation component selection depends primarily on the rating of the main engine's alternator, which varies by engine model. Identify the model of the
main engine, and use the applicable section, following. Part numbers are subject to supersession. CONTROLS AND RIGGING












































































2021 Canada Accessories Guide 585

ELECTRICAL




CONTROLS AND RIGGING

















































































586 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL CONTROLS AND RIGGING























































































2021 Canada Accessories Guide 587

ELECTRICAL




CONTROLS AND RIGGING

















































































588 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL CONTROLS AND RIGGING























































































2021 Canada Accessories Guide 589

ELECTRICAL


ELECTRICAL HARDWARE BULLET TERMINAL
CONTROLS AND RIGGING
ELECTRICAL HARDWARE KIT









86-814434T 9D01 18.02
.156 in.(4 mm) Dia.
Priced & packaged in qty. of 20
86-813937A 2 152C86 254.77
Contains a broad selection of the electrical connectors used on Mercury/Mariner/ BULLET TERMINAL
Force and MerCruiser products.
BULLET TERMINAL RECEPTACLE









86-813937T 7D03 14.06
.18 in.(5 mm) Dia.
86-813936T 5D54 11.08 Priced & packaged in qty. of 20
.18 in.(5 mm) Dia. RING TERMINAL
Priced & packaged in qty. of 20
BULLET TERMINAL RECEPTACLE










86- 60878T 13D20 26.40
#10
86- 87223T 9D30 18.60 Priced & packaged in qty. of 20
.156 in.(4 mm) Dia., two wire. RING TERMINAL
Priced & packaged in qty. of 20
BULLET TERMINAL RECEPTACLE










86- 98199T 8D73 17.46
#10 Self Locking
86-814433T 6D34 12.68 Priced & packaged in qty. of 20
.156 in.(4 mm) Dia.
Priced & packaged in qty. of 20







590 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

ELECTRICAL


RING TERMINAL BULLET TERMINAL RECEPTACLE INSULATOR CONTROLS AND RIGGING












86- 60602T 6D96 13.92 85- 17200 1D28 2.56
.25 in.(6 mm) Dia. .156 in.(4 mm) Dia., two wire
Priced & packaged in qty. of 20 Priced individually, sold @ multiples of 20
RING TERMINAL HEAT SHRINK TUBING












86- 61606T 6D46 12.92 57908 11 9D23 18.46
.312 in.(8 mm) Dia. ring terminal. Heat Shrink Tubing. .25 in.(6 mm) Dia. x 10 inches long.
Priced & packaged in qty. of 20
SPLICE CLIP
BULLET TERMINAL RECEPTACLE INSULATOR











86- 60831T 3D48 6.96
85- 17198 0D38 .76 Splice Clip.
.156 in.(4 mm) Dia. Priced & packaged in qty. of 20
Priced individually, sold @ multiples of 20
CRIMPING TOOL
BULLET TERMINAL RECEPTACLE INSULATOR








91-808696 307F81 398.88
Crimps the electrical connector to the wire.
QUICKSILVER FUNNEL ENTRY VINYL TERMINALS
85- 17199 0D64 1.28
.156 in.(4 mm) Dia., one wire FEMALE TAB DISCONNECT
Priced individually, sold @ multiples of 20



67-851760 4D90 9.80
22‑18 gauge, .187 in.
Priced & packaged in qty. of 25


2021 Canada Accessories Guide 591