ELECTRICAL
67-851761 16C19 26.98 FUSE HOLDER CABLE
22‑18 gauge, .187 in.
CONTROLS AND RIGGING 22‑18 gauge, .250 in. 5D33 10.66
Priced & packaged in qty. of 100
67-851762
Priced & packaged in qty. of 25
10.08
5D04
67-851764
16‑14 gauge, .187 in.
Priced & packaged in qty. of 25
67-851765
16‑14 gauge, .187 in. 17C68 29.47 84- 95084A10 5D32 10.64
Priced & packaged in qty. of 100
Female connector, 5 inches.
67-851766 6D04 12.08
16‑14 gauge, .250 in. FUSE HOLDER CABLE
Priced & packaged in qty. of 25
67-851767 17C68 29.47
16‑14 gauge, .250 in.
Priced & packaged in qty. of 75
67-851768 6D04 12.08
12‑10 gauge, .250 in.
Priced & packaged in qty. of 20
MALE NYLON COUPLER
84- 95084A13 6D81 13.62
Male connector, 64 inches.
FUSE
67-851773 16C61 27.68
16‑14 gauge, .250 in.
Priced & packaged in qty. of 50
QUICKSILVER HEAT SHRINKABLE CONNECTORS
AND TUBING
MALE QUICK DISCONNECT
88-832969 2 2D63 5.26
2 amp mini fuse
67-851706 60C35 100.58
16‑14 gauge FUSE
Priced & packaged in qty. of 100
FUSES AND CIRCUIT BREAKERS
FUSE
88-832969T05 2D66 5.32
5 amp mini fuse
88- 79091 3D55 7.10
20 amp
Priced individually, sold @ multiples of 5
592 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
ELECTRICAL
FUSE FUSE CONTROLS AND RIGGING
88-832969 10 0D92 1.84 88-832969 30 3D12 6.24
10 amp mini fuse 30 amp mini fuse
Fits 1999 & newer V‑6 & V‑8 EFI engines with MEFI 3 ignition
FUSE
FUSE
862646 2D27 4.54
88-832969T15 2D28 4.56 5 amp
15 amp mini fuse Among other applications, this fuse can be found in the DTS Power Harness.
Fits 1999 & newer V‑6 & V‑8 EFI engines with MEFI 3 ignition
FUSE
FUSE
862647 2D48 4.96
88-832969T20 2D48 4.96 10 amp fuse
20 amp mini fuse
FUSE
FUSE
88-812619 2D56 5.12
88-832969T25 2D63 5.26 20 amp fuse
25 amp mini fuse
2021 Canada Accessories Guide 593
ELECTRICAL
FUSE 50 AMP FUSE
CONTROLS AND RIGGING
88- 79023A94 3C46 5.77 88-8M0129562 12C88 21.47
50 Amp fuse used with Power Steering System. APS to Battery Green, 125 amp
Power Steering System Main Power
FUSE ASSEMBLY FUSE
88- 79023T56 31C74 52.90 88-8M0129528 12C88 21.47
55 amp Orange, 150 amp
88- 79023T90 26C34 43.90 Main Power
90 amp with 5/16 in. (8 mm) diameter mounting hole 88-8M0129530 12C88 21.47
88- 79023A91 35C15 58.58 Blue, 200 amp
90 amp with 13/32 in. (10 mm) diameter mounting hole Main Power
Used on Verado power steering as well as various MerCruiser starter applications. 88-8M0129531 12C88 21.47
88- 79023T10 31C17 51.95 Pink, 250 amp
110 amp Main Power
FUSE ASSEMBLY FUSE COVER ASY
88-8M6001960 25C83 43.05 879346T24 6C48 10.81
90 amp ‑ Hot stud fuse Used with Fuse/Harness asy for Power Steering Systems
Used on MCM 4.5L & 6.2L engines Power Steering Systems
FUSE CIRCUIT BREAKER
88-8M0129533 12C88 21.47
Light Green, 30 amp
Main Power
88-8M0129534 12C88 21.47
Red, 50 amp
Main Power
88-8M0129535 12C88 21.47
Lime, 80 amp
Main Power
88-8M0130941 12C04 20.06
Yellow
Main Power 88-8M0085705 33C83 56.38
20 amp for power trim pump
594 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
ELECTRICAL
CIRCUIT BREAKER TOOLS
14 PIN DEPINNING TOOL CONTROLS AND RIGGING
88- 11178A01 82C54 137.56
50 amp w/ nut connections. Includes attaching hardware
91-896352A01 5D94 11.88
CABLE TIES Used to remove pins on 14 pin DTS and non‑DTS harnesses.
CABLE TIE DATA CABLE PULLER
69355 0D17 .34 888462A 1 46C92 78.19
5‑1/2 in. (140 mm) long, black color, 1/16 in. to 1‑1/4 in. (1.6‑32 mm) bundle Attaches to end of data harness to aid in pulling harness through boat. Prevents
diameter. damage to data harness.
Priced individually, sold @ multiples of 100
CABLE TIE
54-816311T 0D33 .66
8 in. (203 mm) long, black color, 3/8 in. to 1‑3/4 in. (9.5‑44 mm) bundle diameter,
60 lbs.(27 kg) minimum loop tensile strength
Priced individually, sold @ multiples of 100
STANDARD CABLE TIE
54-8M0064023 0D38 .76
Standard 11 in. (280 mm) long, black color, 1/16 in.‑3 in.(1.6‑76 mm) bundle
diameter, 50 lbs.(23 kg) minimum loop tensile strength, 1000 pcs./bag
Priced individually, sold @ multiples of 100
2021 Canada Accessories Guide 595
STEERING
STEERING
CONTROLS AND RIGGING STEERING WHEELS STEERING WHEEL- NISIDA B/B
STEERING WHEEL
67-892762A02 130C66 217.75
This wheel is a great value with polyurethane grip and great looks. This Steering
Wheel is a three‑spoke design with a black leather look soft grip and black spokes.
67-829140A01 51C89 86.47 Meets with EN 28848 and ABYC P22 standards. (includes hub)
Legend Steering Wheel with soft grip and wheel center This product is a Wheel Dia.: 13.8 inch (350 mm)
four‑spoke wheel design. Std 3/4 inch taper
Wheel Dia.: 13‑1/2 inch STEERING WHEEL - GRIMANI SS/CP
Dish: 3‑7/8 inch
STEERING WHEEL-V60 BLACK
8M0121295 209C87 349.77
This wheel is a great value with comfortable grip and updated, sporty styling.
67-892762A05 51C48 85.79 Silver spokes, black grip, and silver inserts.
This wheel is a great value with soft grip and great looks. This Steering Wheel is a Standard taper.
three‑spoke design with a black grip and black spokes. Thermoplastic antishock
material. Meets with EN 28848 and ABYC P22 standards. (includes hub) STEERING WHEEL - GRIMANI BRS/CP
13.8 inch (350 mm) wheel diameter • Standard .75 inch (19 mm) taper
STEERING WHEEL-CORSE B/S
8M0121296 209C87 349.77
This wheel is a great value with comfortable grip and updated, sporty styling.
Silver spokes, black grip, and burl wood inserts.
67-892762A01 114C84 191.41 Standard taper.
This wheel is a great value with soft grip and great looks. This Steering Wheel is a
three‑spoke design with a soft black grip and silver spokes. Meets with EN 28848 STEERING WHEEL - GRIMANI CT/CP
and ABYC P22 standards. (includes hub).
13.8 inch (350 mm) wheel diameter • Standard .75 inch (19 mm) taper
8M0121297 225C72 376.19
This wheel is a great value with comfortable grip and updated, sporty styling.
Silver spokes, black grip, and brown‑bronze inserts.
Standard taper.
596 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING
STEERING WHEEL - LOREDAN SS/CP CONTROLS AND RIGGING
8M0121300 225C72 376.19
This wheel is a great value with comfortable grip and updated, sporty styling.
Silver spokes, black grip, and chrome inserts.
Standard taper.
2021 Canada Accessories Guide 597
STEERING
40-115HP TILLER HANDLES
CONTROLS AND RIGGING
598 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING CONTROLS AND RIGGING
2021 Canada Accessories Guide 599
STEERING
CONTROLS AND RIGGING
600 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING CONTROLS AND RIGGING
2021 Canada Accessories Guide 601
STEERING
TILLER HANDLE STEERING-40-300HP TILLER RC/BT TO 65-80HP JET FOURSTROKE TILLER 2167.38
98-8M0159458
1517A17
CONTROLS AND RIGGING 40‑115HP, a new optimally‑sized, feature‑rich, and fully adjustable tiller warning display, the ability to accommodate left‑ or right‑handed operation, and
This new tiller is designed for optimal performance and ergonomic control and
Mercury offers an industry‑leading portfolio of tillers for outboards. For
comfort in any usage. It offers industry‑leading adjustability, an integrated engine
Mercury's famous Troll Control is standard. It is also available with an optional
was recently introduced. It also provides Troll Control as a standard
heated grip for users in cold climates.
feature and a new industry‑first heated grip is available as well. The Big
Tiller is an ideal pairing from 150HP, now all the way up to 300HP
FourStrokes.
T/S cables are included.
65‑80HP Jet FourStroke, currently outfitted with no tiller or Big Tiller.
STD TILLER TO 40-60HP FOURSTROKE TILLER
RC/BT TO 40-60HP SEA PRO FOURSTROKE TILLER
98-8M0159447 1132A78 1618.26
This new tiller is designed for optimal performance and ergonomic control and 98-8M0159453 1087A07 1552.95
comfort in any usage. It offers industry‑leading adjustability, an integrated engine This new tiller is designed for optimal performance and ergonomic control and
warning display, the ability to accommodate left‑ or right‑handed operation, and comfort in any usage. It offers industry‑leading adjustability, an integrated engine
Mercury's famous Troll Control is standard. It is also available with an optional warning display, the ability to accommodate left‑ or right‑handed operation, and
heated grip for users in cold climates. Mercury's famous Troll Control is standard. It is also available with an optional
heated grip for users in cold climates.
This is a conversion kit that allows installation of this tiller on a current tiller handle
model ELHPT "standard tiller" 40 ‑ 60 HP FourStroke with generation change S/N T/S cables are included.
1C050252 and above. 40‑60 HP Sea Pro FourStroke currently outfitted with no tiller or Big Tiller.
T/S cables are included.
RC/BT TO 75-115HP SEA PRO FOURSTROKE TILLER
RC/BT TO 40-60HP FOURSTROKE TILLER 98-8M0159460 1517A17 2167.38
98-8M0159449 1087A07 1552.95 This new tiller is designed for optimal performance and ergonomic control and
This new tiller is designed for optimal performance and ergonomic control and comfort in any usage. It offers industry‑leading adjustability, an integrated engine
comfort in any usage. It offers industry‑leading adjustability, an integrated engine warning display, the ability to accommodate left‑ or right‑handed operation, and
warning display, the ability to accommodate left‑ or right‑handed operation, and Mercury's famous Troll Control is standard. It is also available with an optional
Mercury's famous Troll Control is standard. It is also available with an optional heated grip for users in cold climates.
heated grip for users in cold climates.
T/S cables are included.
T/S cables are included. 75‑115HP Sea Pro FourStroke, currently outfitted with no tiller or Big Tiller.
40‑60 HP FourStroke used with ELPT generation change S/N 1C050252 and
above, currently outfitted with no tiller or Big Tiller. TILLER HEATED GRIP KIT
RC/BT TO 35-40HP JET FOURSTROKE TILLER
98-8M0159451 1100A62 1572.30
This new tiller is designed for optimal performance and ergonomic control and
comfort in any usage. It offers industry‑leading adjustability, an integrated engine
warning display, the ability to accommodate left‑ or right‑handed operation, and
Mercury's famous Troll Control is standard. It is also available with an optional
heated grip for users in cold climates.
T/S cables are included.
35‑40HP Jet FourStroke models that are currently outfitted with no tiller or Big
Tiller.
RC/BT TO 75-115HP FOURSTROKE TILLER 8M0158400 121C57 202.62
98-8M0159456 1517A17 2167.38 Optional heated grip offers three levels of heat for cold‑weather operation. Anglers
This new tiller is designed for optimal performance and ergonomic control and can warm their hands after handling their catch, and electronic features prevent
comfort in any usage. It offers industry‑leading adjustability, an integrated engine excessive battery drain.
warning display, the ability to accommodate left‑ or right‑handed operation, and Includes grip and module.
Mercury's famous Troll Control is standard. It is also available with an optional Compatible with all 35‑115HP Tiller models.
heated grip for users in cold climates.
T/S cables are included.
75‑115HP FourStroke, currently outfitted with no tiller or Big Tiller.
602 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING
MECHANICAL TILLER WITH P/S THROTTLE AND SHIFT KIT- 35 AND 40 JET
FOURSTROKE BIG TILLER CONTROLS AND RIGGING
98-8M0151561 3668A57 5240.81
The Big Tiller is designed for optimal performance and ergonomic comfort. With 8M0143358 66C16 110.27
improved friction adjustments, a hydraulic locking feature to eliminate torque, easy The kit includes 2 ‑ T/S cables. These cables are designed to provide best in class
access to the throttle shift handle and a trim button at the end of the handle, the Big installation for this engine family.
Tiller provides safe and effortless operation. The RPM Adjustment switch (Troll The kit is designed to work with the 35 and 40HP Jet FourStroke engines with Big
Control) is included as standard equipment on this model. This model uses the Tiller.
latest steering pump technology, the Gen C.
THROTTLE AND SHIFT KIT- 75-115 FOURSTROKE
The LED light switch is available as an option on this model. TILLER
This power steering Big Tiller model is intended for use on the 3.4L (V6) and 4.6L 8M0083500 48C29 80.49
(V8) FourStrokes up to 300hp.
The kit includes 2 ‑ T/S cables. These cables are designed to provide best in class
DTS TILLER HANDLE WITH P/S installation for this engine family.
The kit is designed to work with the 2.1L 75‑115 HP FourStroke engines. (Upgrade
with no spacer Ref Tiller Arm 8M0093581).
THROTTLE AND SHIFT KIT- 75-115 1.5L OPTIMAX
TILLER
98-8M0151560 3920A44 5600.63
The Big Tiller is designed for optimal performance and ergonomic comfort. With
improved friction adjustments, a hydraulic locking feature to eliminate torque, easy
access to the throttle and shift handle and a trim button at the end of the handle,
the Big Tiller provides safe and effortless operation. This model features the latest
steering pump technology, the Gen C. 8M0083238 52C55 87.60
The kit includes 2 ‑ T/S cables. These cables are designed to provide the best in
The RPM Adjustment (Troll Control) and LED light switch are standard on this class installation for this engine family.
model. The kit is designed to work with the 75 ‑ 115 HP OptiMax engines. (Upgrade with
This power steering Big Tiller model is intended for use on the 3.4L (V6) and 4.6L no spacer Ref Tiller Arm 8M0093581).
(V8) FourStrokes up to 300hp.
THROTTLE AND SHIFT KIT- 135HP+ OPTIMAX
MECHANICAL TILLER WITH P/S
8M0082353 52C55 87.60
98-8M0151564 3645A50 5207.86 The kit includes 2 ‑ T/S cables. These cables are designed to provide the best in
The Big Tiller is designed for optimal performance and ergonomic comfort. With class installation for this engine family.
improved friction adjustments, a hydraulic locking feature eliminating torque, easy The kit is designed to work with the 135HP+ OptiMax engines.
access to the throttle and shift handle and a trim button at the end of the handle the
Big Tiller provides safe and effortless operation. The RPM adjustment switch (Troll
Control) is included as standard equipment on this model.
The LED light switch is available as an option on this model.
Power Steering is strongly recommended for the 150 FourStroke.
The Big Tiller kit (Power Steering) with extra length and bent arm to attach to the
150 HP FourStroke engine.
2021 Canada Accessories Guide 603
STEERING
THROTTLE AND SHIFT KIT- 3.0L 150 FOURSTROKE OUTBOARD STABILIZER CLIPS- TRAILERING
TILLER
CONTROLS AND RIGGING
64-891762A04 10C27 17.10
8M0082355 50C17 83.63 Helps keep engine centered during trailering
The kit includes 2 ‑ T/S cables. These cables are designed to provide best in class Safety orange durable plastic material
installation for this engine family. Fits most cylinder rods on engines manufactured in 1997 and newer.
The kit is designed to work with the 3.0L 150 HP FourStroke engines. Snaps over outboard's hydraulic steering cylinder rods
THROTTLE AND SHIFT KIT- 150-250
POWER STEERING - SINGLE
STEERING KIT 40 CM3 STD HELM - SINGLE
8M0141907 51C17 85.27
The kit includes 2 ‑ T/S cables. These cables are designed to provide the best in
class installation for this engine family.
This kit is intended to be paired with the mechanical Big Tiller on the 3.4L (V6) and 98-8M0151555 1513A96 2162.81
4.6L (V8) FourStrokes up to 300hp. Power Steering Single Rigging Kit that includes the Gen C pump, Std 40 CM3
Helm, Single engine adapter harness, and Automatic Power switch. Hoses need to
TROLL CONTROL KIT be ordered separately. 4, 12, or 24 ft power steering harnesses are now sold
separately as well.
Verado and other power steering applications.
STEERING KIT 40 CM3 TILT HELM - SINGLE
98-8M0151557 1562A45 2232.06
Power Steering Single Rigging Kit that includes the Gen C pump, Tilt 40 CM3
Helm, Single engine adapter harness, and Automatic Power switch. Hoses need to
be ordered separately. 4, 12, or 24 ft power steering harnesses are now sold
separately as well.
87-8M0083437 75C94 126.56
RPM adjustment at your finger tips. This kit can be added to the Big Tiller Verado and other power steering applications.
Mechanical without P/S as an option
POWER STEERING - DUAL
LED LIGHT AND SWITCH KIT
STEERING KIT 40 CM3 STD HELM - DUAL
98-8M0151554 1600A58 2286.53
Power Steering Dual Rigging Kit that includes the Gen C pump, Std 40 CM3 Helm,
Dual engine adapter harness, and Automatic Power switch. Hoses need to be
ordered separately. 4, 12, or 24 ft power steering harnesses are now sold
separately as well.
Multiple Engine 150 FourStrokes and Optimax (No Single engines) and Verado.
87-897978T02 51C66 86.10 STEERING KIT 50 CM3 STD HELM - SINGLE
New LED light and Switch Kit is an option on all Mechaincal Big Tiller units.
Allows for easy installation on the new Big Tiller. Light up your boat with a soft
Amber light to make night fishing or early morning fishing more fexible.
98-8M0151558 1627A86 2325.52
Power Steering Single Rigging Kit that includes the Gen C pump, Std 50 CM3
Helm, Single engine adapter harness, and Automatic Power switch. Hoses need to
be ordered separately. 4, 12, or 24 ft power steering harnesses are now sold
separately as well.
Verado and other power steering applications.
604 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING
STEERING KIT 40 CM3 TILT POWER STEERING - QUAD
STEERING KIT 50 CM3 TILT HELM - QUAD
98-8M0151563 2164A46 3092.10 CONTROLS AND RIGGING
Power Steering Quad Rigging Kit that includes the Gen C pump, Tilt 50 CM3 Helm,
Quad engine adapter harness, and Automatic Power switch. Hoses need to be
ordered separately. 4, 12, or 24 ft power steering harnesses are now sold
separately as well.
8M0134651 1772A67 2532.40 Verado and other power steering applications.
Complete Power Steering Dual Rigging Kit that includes the Power Steering
Module (4 ft. lead), Tilt 40 CM3 Helm, Dual engine adapter harness, Automatic POWER STEERING COMPONENTS
Power Switch and two engine signal harnesses 20 ft in length. Hoses need to be
ordered separately Cylinder to Helm kit and Power Module to Helm Kit. When
using 50 amp fuse product you will need to order a Fuse/Harness Assembly when HELM - POWER STEERING - STANDARD
installing more than one battery.
Multiple Engine 150 FourStrokes and Optimax (No Single engines), Verado
135‑200 4 Cylinder and 200‑300 HP Verado.
STEERING KIT 40 CM3 TILT HELM - DUAL
98-8M0151556 1704A94 2435.63
Power Steering Dual Rigging Kit that includes the Gen C pump, Tilt 40 CM3 Helm,
Dual engine adapter harness, and Automatic Power switch. Hoses need to be
ordered separately. 4, 12, or 24 ft power steering harnesses are now sold
separately as well. 8M0137445 412C08 686.79
Multiple Engine 150 FourStrokes and Optimax (No Single engines) and Verado. Power Steering helm with a fixed position mount. Includes cover, bracket and
mounting hardware. (40 CM3) 4.1 turns lock to lock with one cylinder
STEERING KIT 50 CM3 TILT HELM - SINGLE Multiple Engine 150 4 strokes and Optimax (No Single engines) , Verado 135‑200
4 cylinder, 200‑300 Verado 6 cylinder, 350 SCI
HELM - POWER STEERING - TILT - HD
98-8M0151559 1972A07 2817.26
Power Steering Single Rigging Kit that includes the Gen C pump, Tilt 50 CM3
Helm, Single engine adapter harness, and Automatic Power switch. Hoses need to
be ordered separately. 4, 12, or 24 ft power steering harnesses are now sold
separately as well.
Verado and other power steering applications.
POWER STEERING - TRIPLE
STEERING KIT 50 CM3 STD HELM - TRIPLE
8M0137447 629C79 1049.67
Power Steering Helm 40 CM3 Tilt. Includes all brackets and hardware needed to
install helm.
Provides 4.1 turns lock to lock with one cylinder
Multiple Engine 150 4 strokes and Optimax (No Single engines) , Verado 135‑200
98-8M0151565 1637A94 2339.90 4 cylinder, 200‑300 Verado 6 cylinder, 350 SCI
Power Steering Triple Rigging Kit that includes the Gen C pump, Std 50 CM3
Helm, Triple engine adapter harness, and Automatic Power switch. Hoses need to HELM - POWER STEERING - STANDARD - HD
be ordered separately. 4, 12, or 24 ft power steering harnesses are now sold
separately as well.
Verado and other power steering applications.
STEERING KIT 50 CM3 TILT HELM - TRIPLE
98-8M0151566 2011A50 2873.57
Power Steering Triple Rigging Kit that includes the Gen C pump, Tilt 50 CM3 Helm,
Triple engine adapter harness, and Automatic Power switch. Hoses need to be
ordered separately. 4, 12, or 24 ft power steering harnesses are now sold
separately as well. 8M0137449 431C72 719.55
Verado and other power steering applications. Power Steering helm with a fixed position mount. Includes cover, bracket and
mounting hardware.(50 CM3) Use with dual cylinder applications such as triple/
quad engine installations. (6.5 turns lock to lock with two cylinders)
Multiple Engine 150 4 strokes and Optimax (No Single engines), Verado 135‑200 4
cylinder, 200‑300 Verado 6 cylinder, 350 SCI
2021 Canada Accessories Guide 605
STEERING
HELM - POWER STEERING - TILT - HD HELM - POWER STEERING -TILT
CONTROLS AND RIGGING
8M0137451 637C83 1063.04 8M0137442 633C55 1055.91
Power Steering Helm 50 CM3 Tilt. Includes all brackets and hardware needed to Power Steering Helm 32 CM3 Tilt. Includes all brackets and hardware needed to
install helm. install helm.
Provides 6.5 turns lock to lock with two cylinders. Recommended for triple and Provides 5.1 turns lock to lock vs 4.1 turns lock to lock as option with one cylinder
quad engine installations. Verado 200‑ 300 HP‑ Optional on 135 to 200 HP
Multiple Engine 150 4 strokes and Optimax (No Single engines), Verado 135‑200 4 Multiple OptiMax Engines
cylinder, 200‑300 Verado 6 cylinder, 350 SCI
HELM DUAL STATION - STANDARD
HELM - POWER STEERING - STANDARD
8M0162224 412C01 686.67
Power Steering helm with a fixed position mount. Includes cover, bracket and
mounting hardware.(80 CM3)
Multiple Engine or high steering load applications, 300‑450HP. Intended for use
only when paired with the Gen C HD pump.
HELM - POWER STEERING -TILT
8M0137453 498C89 831.51
Power Steering dual helm with a fixed position mount. Includes cover, bracket and
mounting hardware.(40 CM3) Needs 32‑892825___ hose to attach pressure lines
(lengths come in 8 ft to 25 ft lengths). Use as primary station when using dual
8M0162225 466C96 778.27 helms or stations. Use standard helm as the secondary station.
Power Steering Helm 80 CM3 Tilt. Includes all brackets and hardware needed to Multiple Engine 150 4 strokes and Optimax (No Single engines), Verado 135‑200 4
install helm. cylinder, 200‑300 Verado 6 cylinder, 350 SCI
Recommended for triple and quad engine installations. HELM DUAL STATION - TILT
Multiple Engine or high steering load applications, 300‑450HP. Intended for use
only when paired with the Gen C HD pump.
HELM - POWER STEERING - STANDARD
895818K12 576C51 960.86
Power Steering dual helm with a tilt position mount. Includes cover, bracket and
mounting hardware. (40 CM3) Needs 32‑892825___ hose to attach pressure
8M0137439 448C41 747.36 lines (lengths come in 8 ft to 25 ft lengths) Use as primary station when using dual
Power Steering helm with a fixed position mount. Includes cover, bracket and helms or stations. Use standard helm as the secondary station. Requires tilt
mechanism to be ordered separately.
mounting hardware. (32 CM3) Provides 5.1 turns lock to lock vs 4.1 turns lock to
lock as option with one cylinder. Multiple Engine 150 4 strokes and Optimax (No Single engines) , Verado 135‑200
Multiple Engine 150 4 strokes and Optimax (No Single engines),Verado 135‑200 4 4 cylinder, 200‑300 Verado 6 cylinder, 350 SCI
cylinder, 200‑300 Verado 6 cylinder, 350 SCI
606 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING
HELM DUAL STATION - STANDARD CYLINDER - HYDRAULIC OR POWER STEERING CONTROLS AND RIGGING
8M0137459 459C30 765.50 898349A11 631C09 1051.80
Power Steering dual helm with a fixed position mount. Includes cover, bracket and Cylinder designed to meet all Power Steering strength and performance
mounting hardware. (50 CM3) Needs 32‑892825___ hose to attach pressure requirements. This cylinder is the most robust design in the market. Includes all
lines (lengths come in 8 ft to 25 ft lengths) Use as primary station when using dual hardware to mount this cylinder including the strongest bolts to attach to the
helms or stations. Use standard helm as the secondary station. engine.
Multiple Engine 150 4 strokes and Optimax (No Single engines) , Verado 135‑200 Verado 175‑200 ‑ both Power Steering or Hydraulic V6/1.5 Opti Max Hydraulic ‑
4 cylinder, 200‑300 Verado 6 cylinder, 350 SCI 1.5L Opti needs to order arm 898082A03 to provide clearance
75‑150 4 stroke engines.
HELM DUAL STATION - TILT
CYLINDER - HYDRAULIC OR P/S- COUNTER ROTATION
8M0137461 596C79 994.65
Power Steering dual helm with a tilt position mount. Includes cover, bracket and 898349A14 712C75 1187.90
mounting hardware. (50CM3) Needs 32‑892825___ hose to attach pressure lines Port ot counter rotation cylinder designed to meet all Power Steering strength and
(lengths come in 8 ft to 25 ft lengths) Use as primary station when using dual performance requirements. This cylinder is the most robust design in the market.
helms or stations. Use standard helm as the secondary station. Requires tilt Includes all hardware to mount this cylinder including the strongest bolts to attach
mechanism to be ordered separately. to the engine
Multiple Engine 150 4 strokes and Optimax (No Single engines) , Verado 135‑200 Verado 135‑200 ‑ both Power Steering or Hydraulic. Multiple Engines
4 cylinder, 200‑300 Verado 6 cylinder, 350 SCI V6/1.5 Opti Max Hydraulic ‑ 1.5L Opti needs to order arm 898082A03 to provide
clearance 75‑115 4 stroke engines Multiple OtiMax engines ‑ P/S 150 4 Stroke
KEYWAY - POWER STEERING-SHORT KEY engines.
CYLINDER - BIG TILLER
28-893394002 6C03 10.05
Used with power steering to locate steering wheel hub. 712C75 1187.90
2005 and newer Verado 200‑275 and 2006 Verado 135‑175 Power Steering 898349A15
installs Cylinder designed to meet all Power Steering strength and performance
Priced individually, sold @ multiples of 2 requirements. This cylinder is the most robust design in the market. Includes all
hardware to mount this cylinder including the strongest bolts to attach to the
engine.
Big Tiller Cylinder ‑ 75‑115 4 Stroke, 75‑115 1.5L Opti, 135‑250 2.5L/3.0L Opti
and 135‑200 4 Cylinder Verado
2021 Canada Accessories Guide 607
STEERING
CYLINDER- POWER STEERING - BIG TILLER CYLINDER - SHORTER STROKE
CONTROLS AND RIGGING
8M0058944 665C21 1108.71 8M0129527 989A90 1414.15
This cylinder was released with a special bent arm that provides more clearance This cylinder has s shorter stroke than the normal production cylinders. It is used
and is longer than the others. It is unique to the Big Tiller Power Steering . Used for installations where engines are mounted inside the normal 26 inch distance.
in complete Kit 8M0061721. 150 ‑ 4S This cylinder reduces the chances of the engines hitting with these tight mounting
150 HP 4 Stroke Big Tiller options
Verado 6 Cylinder Power Steering applications for mounting engines closer that the
POWER STEERING CYLINDER normal tie bar 26 inch distance.
FUSE ASSEMBLY
8M0118141 655C08 1091.80
Used to add a cylinder to a counter rotation engine for multiple engine installations.
Also used with liquid tie bar 893396A01 to add a cylinder to operate engines 88- 79023A93 17C11 28.51
mounted more than 34 in. apart 90 amp with 13/32 in. (10 mm) diameter mounting hole
2005 and newer Verado 200‑300 L6 and 350 SCI Used on Verado power steering as well as various MerCruiser starter applications.
CYLINDER - DUAL CYLINDER POWER STEERING FUSE 50 AMP
8M0129513 2697A16 3853.10 88- 79023A94 3C46 5.77
This cylinder is designed to meet all power steering strength and performance 50 Amp fuse used with Power Steering System. APS to Battery
requirements. It is the most robust design in the market and includes all hardware Power Steering System
to mount the cylinder including the strongest bolts to attach to the engine. The
UC128 cylinder link is attached to the steering head. FUSE COVER ASY
Verado 225+ horsepower and 200 Pro FourStroke. Intended for use on pontoons,
which have exceptionally high steering loads. This system increases steering
torque capacity by more than 80%.
879346T24 6C48 10.81
Used with Fuse/Harness asy for Power Steering Systems
Power Steering Systems
608 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING
FUSE/HARNESS ASSEMBLY SYNTHETIC POWER STEERING FLUID SAE 0W-30 CONTROLS AND RIGGING
84-8M0144917 36C11 60.19 92-858076K01 6C79 11.31
New 3 FT fuse /harness asy will be used with the new 50 amp Power Steering Recommended for electric power steering systems such as Verado.
circuit. It will connect from the APS module to the battery. Used with Power Recommended for transmission and steering and actuator systems for Zeus drives
Steering Pumps 892440A17,A18 and A19 Priced individually, sold @ multiples of 12
Used on all Power Steering installations 236 ml (8 fl oz) plastic bottle
84-8M0144923 36C06 60.10
New 5 FT fuse /harness asy will be used with the new 50 amp Power Steering SYNTHETIC POWER STEERING FLUID SAE 0W-30
circuit. It will connect from the APS module to the battery. Used with Power
Steering Pumps 892440A17,A18 and A19
Used on all Power Steering installations
FUSE/HARNESS ASSEMBLY
92-858077K01 16C89 28.16
Recommended for electric power steering systems such as Verado, JPO and Axius
Gen I only. Recommended for transmission and steering and actuator systems for
Zeus drives
Priced individually, sold @ multiples of 6
84-8M0144924 42C33 70.55 946 ml (32 fl oz) plastic bottle
New 10 FT fuse /harness asy will be used with the new 50 amp Power Steering
circuit. It will connect from the APS module to the battery. Used with Power DUAL ENGINE ADAPTER-P/S "Y" HARNESS
Steering Pumps 892440A17,A18 and A19
Used on all Power Steering installations
POWER STEERING HOSE- DAMPENER
84-892868T01 29C28 48.80
Used to connect two engines and two signal harnesses together to run both
engines from one power module. "Y" harness
Verado Engines 200‑300 HP and 350 SCI ‑ Optional on 135‑200 HP
32-897643A01 79C96 133.28
Hose used to reduce noise of the power steering system TRIPLE ENGINE ADAPTER- P/S "Y" HARNESS
Multiple Engine 150 4 strokes and Optimax (No Single engines) , Verado 135‑200
4 cylinder, 200‑300 Verado 6 cylinder, 350 SCI
84-892868T02 37C22 62.03
Used to connect three engines and three signal harnesses together to run three
engines from one power module. Each engine requires a signal harness hooked
up to the Power Module.
2005 Verado Engines 200‑300 HP and 350 SCI ‑ Optional on 135‑200 4 cylinder
Verado
2021 Canada Accessories Guide 609
STEERING
QUAD ENGINE ADAPTER- P/S "Y" HARNESS ELECTRICAL ISOLATOR KIT- DUAL OPTI AND 150
FOURSTROKE
CONTROLS AND RIGGING Used to add Power steering option to Dual OptiMax or 150 FourStroke engines
8M0134605
384C13
640.21
Dual OptiMax or 150 FourStroke Engines
FOURSTROKE
84-892868T03 45C16 75.25 ELECTRICAL ISOLATOR KIT- TRIPLE OPTI AND 150
Used to connect four engines and four signal harnesses together to run Quad
engines from one power module. Each engine requires a signal harness hooked
up to the Power Module. 8M0134606
2006 Verado Engines 200‑300 HP and 350 SCI ‑ Optional on 135‑200 4 cylinder Used to add Power steering option to Triple OptiMax or 150 FourStroke engines
verado
Triple OptiMax and 150 FourStroke Engines
HARNESS- POWER STEERING - SIGNAL
POWER STEERING PRIMER MODULE
84-8M0138676 33F52 128.28
Connects the power steering module to the engine which provides communication 91-895040K01 126C41 210.69
from engine to the power steering. 10 foot length. Multiple engine installations Used to prep the Power Steering system. Module allows pump to be run without
require one harness per engine. starting engine. Allows bleeding and testing of power Steering system out of the
water.
Verado Engines 200‑400 HP ‑ Optional on 135‑200 HP Verado Engines 200‑300 HP‑ Optional on 135‑200 HP
84-8M0138677 39F58 123.80
Connects the power steering module to the engine which provides communication HOSE KIT- P/S AND MERCURY HYDRAULIC -CYL/HELM
from engine to the power steering. 20 foot length. Multiple engine installations
require one harness per engine.
Verado Engines 200‑400 HP ‑ Optional on 135‑200 HP
84-8M0138678 46F17 125.81
Connects the power steering module to the engine which provides communication
from engine to the power steering. 30 foot length. Multiple engine installations
require one harness per engine.
Verado Engines 200‑400 HP ‑ Optional on 135‑200 HP
80 AMP AUTOMATIC POWER SWITCH
32-8M0167281 105C56 175.93
Kit includes two hoses of same length (2 ft) to connect the Helm to the Cylinder on
the engine.
Verado Engines 200‑300 HP‑ 135‑200 HP (Power Steering and Mercury Hydraulic
Steering) MCM Power Steering (879273A01/A02) 350 SCI
32-8M0167282 107C21 178.68
Kit includes two hoses of same length (3 ft) to connect the Helm to the Cylinder on
the engine.
Verado Engines 200‑300 HP‑ 135‑200 HP (Power Steering and Mercury Hydraulic
Steering) MCM Power Steering (879273A01/A02) 350 SCI
87-8M0149746 222C81 371.36
Up to three batteries can be used on the 80 Amp automatic power switch. Includes 32-8M0046916 124C11 206.84
4 insulator boots (not shown). Kit includes two hoses of same length (4 ft) to connect the Helm to the Cylinder on
Used with multiple engine/battery installations when a Verado power steering pump the engine.
is used. Allows the Power steering pump to run off of either the port or starboard Verado Engines 200‑300 HP‑ 135‑200 HP (Power Steering and Mercury Hydraulic
crank battery. Steering) MCM Power Steering (879273A01/A02) 350 SCI
32-8M0167284 125C67 209.46
Kit includes two hoses of same length (5 ft) to connect the Helm to the Cylinder on
the engine.
Verado Engines 200‑300 HP‑ 135‑200 HP (Power Steering and Mercury Hydraulic
Steering) MCM Power Steering (879273A01/A02) 350 SCI
610 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING
32-8M0167285 131C86 219.77 POWER STEERING HOSE KIT - GEN C POWER
Kit includes two hoses of same length (6 ft) to connect the Helm to the Cylinder on MODULE TO HELM
the engine.
Verado Engines 200‑300 HP‑ 135‑200 HP (Power Steering and Mercury Hydraulic
Steering) MCM Power Steering (879273A01/A02) 350 SCI
32-8M0046919 144C30 240.50
Kit includes two hoses of same length (7 ft) to connect the Helm to the Cylinder on CONTROLS AND RIGGING
the engine.
Verado Engines 200‑300 HP‑ 135‑200 HP (Power Steering and Mercury Hydraulic
Steering) MCM Power Steering (879273A01/A02) 350 SCI
32-8M0167287 145C82 243.03
Kit includes two hoses of same length (8 ft) to connect the Helm to the Cylinder on
the engine.
Verado Engines 200‑300 HP‑ 135‑200 HP (Power Steering and Mercury Hydraulic
Steering) MCM Power Steering (879273A01/A02) 350 SCI 32-8M0150604 143C16 238.59
32-8M0167288 169C00 281.67 Kit includes two hoses of same length (2 ft) to connect the Gen C Power Module to
Kit includes two hoses of same length (10 ft) to connect the Helm to the Cylinder the Helm.
on the engine. (Power Steering)
Verado Engines 200‑300 HP‑ 135‑200 HP (Power Steering and Mercury Hydraulic All Mercury power steering.
Steering) MCM Power Steering (879273A01/A02) 350 SCI POWER STEERING HOSE KIT- POWER MODULE TO
32-8M0046922 170C66 284.43 HELM
Kit includes two hoses of same length (12 ft) to connect the Helm to the Cylinder
on the engine.
Verado Engines 200‑300 HP‑ 135‑200 HP (Power Steering and Mercury Hydraulic
Steering) MCM Power Steering (879273A01/A02) 350 SCI
32-8M0046923 183C07 305.12
Kit includes two hoses of same length (14 ft) to connect the Helm to the Cylinder
on the engine.
Verado Engines 200‑300 HP‑ 135‑200 HP (Power Steering and Mercury Hydraulic
Steering) MCM Power Steering (879273A01/A02) 350 SCI
32-8M0167291 179C98 299.96
Kit includes two hoses of same length (16 ft) to connect the Helm to the Cylinder
on the engine.
Verado Engines 200‑300 HP‑ 135‑200 HP (Power Steering and Mercury Hydraulic 32-892438K03 95C38 158.97
Steering) MCM Power Steering (879273A01/A02) 350 SCI Kit includes two hoses of same length (3 ft) to connect the Power Module to the
32-8M0046925 200C14 333.57 Helm. ( Power Steering)
Kit includes two hoses of same length (18 ft) to connect the Helm to the Cylinder Verado Engines 200‑350 HP‑ 135‑200 HP (Power Steering and Mercury Hydraulic
on the engine. Steering)
Verado Engines 200‑300 HP‑ 135‑200 HP (Power Steering and Mercury Hydraulic
Steering) MCM Power Steering (879273A01/A02) 350 SCI POWER STEERING HOSE KIT - GEN C POWER
32-8M0167293 199C03 331.72 MODULE TO HELM
Kit includes two hoses of same length (20 ft) to connect the Helm to the Cylinder
on the engine.
Verado Engines 200‑300 HP‑ 135‑200 HP (Power Steering and Mercury Hydraulic
Steering) MCM Power Steering (879273A01/A02) 350 SCI
32-8M0167294 220C31 367.17
Kit includes two hoses of same length (22 ft) to connect the Helm to the Cylinder
on the engine.
Verado Engines 200‑300 HP‑ 135‑200 HP (Power Steering and Mercury Hydraulic
Steering) MCM Power Steering (879273A01/A02) 350 SCI
32-8M0167295 232C71 387.85
Kit includes two hoses of same length (24 ft) to connect the Helm to the Cylinder
on the engine. 32-8M0150606 141C19 235.31
Verado Engines 200‑300 HP‑ 135‑200 HP (Power Steering and Mercury Hydraulic
Steering) MCM Power Steering (879273A01/A02) 350 SCI Kit includes two hoses of same length (4 ft) to connect the Gen C Power Module to
the Helm.
32-8M0046929 242C02 403.38 (Power Steering)
Kit includes two hoses of same length (26 ft) to connect the Helm to the Cylinder All Mercury power steering.
on the engine. ( Power Steering)
Verado Engines 200‑300 HP‑ 135‑200 HP (Power Steering and Mercury Hydraulic 32-8M0150607 278C40 464.01
Steering) MCM Power Steering (879273A01/A02) 350 SCI Kit includes two hoses of same length (5 ft) to connect the Gen C Power Module to
the Helm.
32-8M0167297 249C79 416.32 (Power Steering)
Kit includes two hoses of same length (28 ft) to connect the Helm to the Cylinder All Mercury power steering.
on the engine. 281C35 468.92
Verado Engines 200‑300 HP‑ 135‑200 HP (Power Steering and Mercury Hydraulic 32-8M0150608
Steering) MCM Power Steering (879273A01/A02) 350 SCI Kit includes two hoses of same length (6 ft) to connect the Gen C Power Module to
the Helm.
32-8M0167298 265C30 442.17 (Power Steering)
Kit includes two hoses of same length (30 ft) to connect the Helm to the Cylinder All Mercury power steering.
on the engine. 32-8M0150610 288C66 481.10
Verado Engines 200‑300 HP‑ 135‑200 HP (Power Steering and Mercury Hydraulic
Steering) MCM Power Steering (879273A01/A02) 350 SCI Kit includes two hoses of same length (7 ft) to connect the Gen C Power Module to
32-8M0167299 268C41 447.35 the Helm.
(Power Steering)
Kit includes two hoses of same length (32 ft) to connect the Helm to the Cylinder All Mercury power steering.
on the engine.
Verado Engines 200‑300 HP‑ 135‑200 HP (Power Steering and Mercury Hydraulic
Steering) MCM Power Steering (879273A01/A02) 350 SCI
2021 Canada Accessories Guide 611
STEERING
POWER STEERING HOSE KIT- POWER MODULE TO POWER STEERING HOSE KIT - GEN C POWER
MODULE TO HELM
HELM
CONTROLS AND RIGGING
32-892438K08 121C17 201.94 32-8M0150615 175C81 293.01
Kit includes two hoses of same length (8 ft) to connect the Power Module to the Kit includes two hoses of same length (14 ft) to connect the Gen C Power Module
Helm. (Power Steering) to the Helm.
Verado Engines 200‑350 HP‑ 135‑200 HP (Power Steering and Mercury Hydraulic (Power Steering)
Steering) All Mercury power steering.
POWER STEERING HOSE KIT - GEN C POWER 32-8M0150616 190C65 317.75
MODULE TO HELM Kit includes two hoses of same length (18 ft) to connect the Gen C Power Module
to the Helm.
(Power Steering)
All Mercury power steering.
32-8M0150617 204C31 340.51
Kit includes two hoses of same length (18 ft) to connect the Gen C Power Module
to the Helm.
(Power Steering)
All Mercury power steering.
32-8M0150618 219C04 365.07
Kit includes two hoses of same length (20 ft) to connect the Gen C Power Module
to the Helm.
(Power Steering)
All Mercury power steering.
32-8M0150613 166C62 277.69
Kit includes two hoses of same length (10 ft) to connect the Gen C Power Module 32-8M0150619 232C15 386.92
to the Helm. Kit includes two hoses of same length (22 ft) to connect the Gen C Power Module
(Power Steering) to the Helm.
All Mercury power steering. (Power Steering)
All Mercury power steering.
POWER STEERING HOSE KIT- POWER MODULE TO 32-8M0150620 268C82 448.02
HELM Kit includes two hoses of same length (24 ft) to connect the Gen C Power Module
to the Helm.
(Power Steering)
All Mercury power steering.
POWER STEERING HOSE - BULKHEAD TO CYLINDER
PRESSURE
32-892438K12 134C51 224.19
Kit includes two hoses of same length (12 ft) to connect the Power Module to the
Helm. (Power Steering)
Verado Engines 200‑350 HP‑ 135‑200 HP (Power Steering and Mercury Hydraulic
Steering)
32-8M0077082 80C36 133.91
.375 inch hose, bulkhead to cylinder pressure for joystick applications.
32-8M0077084 88C81 148.01
.375 inch hose, bulkhead to cylinder pressure for joystick applications.
612 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING
HOSE- PRESSURE- DUAL STATION 32-892825022 136C96 228.27
Used to connect dual station/ Helm together (22 ft) Power Steering
Verado Engines ‑ 135 to 300 HP Power Steering Can also be used for MCM PS
System
32-892825024 146C66 244.44
Used to connect dual station/ Helm together (24 ft) Power Steering
Verado Engines ‑ 135 to 300 HP Power Steering Can also be used for MCM PS CONTROLS AND RIGGING
System
32-892825026 142C56 237.59
Used to connect dual station/ Helm together (26 ft) Power Steering
Verado Engines ‑ 135 to 300 HP Power Steering Can also be used for MCM PS
System
32-8M0148099 262C06 436.76 POWER STEERING HOSE- DAMPENER
Used to connect dual station/ Helm together (6 ft) Power Steering
Verado Engines ‑ 135 to 350 HP Power Steering Can also be used for MCM PS
System
32-8M6001502
Used to connect dual station/ Helm together (2 ft) Power Steering
Verado Engines ‑ 135 to 350 HP Power Steering Can also be used for MCM PS
System
32-8M6001504
Used to connect dual station/ Helm together (4 ft) Power Steering
Verado Engines ‑ 135 to 350 HP Power Steering Can also be used for MCM PS
System
32-8M0148099 262C06 436.76
32-897643A01
Used to connect dual station/ Helm together (6 ft) Power Steering Hose used to reduce noise of the power steering system 79C96 133.28
Verado Engines ‑ 135 to 350 HP Power Steering Can also be used for MCM PS
System Multiple Engine 150 4 strokes and Optimax (No Single engines) , Verado 135‑200
4 cylinder, 200‑300 Verado 6 cylinder, 350 SCI
HOSE- PRESSURE- DUAL STATION FITTING - BULKHEAD 3/4 IN. MALE TO MALE
32-892825008 103C63 172.71 22-892517 23C77 39.63
Used to connect dual station/ Helm together (8 ft) Power Steering Fitting ‑ Bulkhead 3/4 in. Male To Male.
Verado Engines ‑ 135 to 300 HP Power Steering Can also be used for MCM PS
System Used to install a bulkhead installation 0 in. to 3/4 in Maximum wall thickness grip
length‑ Power Steering.
32-892825010 96C00 160.00
Used to connect dual station/ Helm together (10 ft) Power Steering FITTING- BULKHEAD 3 IN. MALE TO MALE
Verado Engines ‑ 135 to 300 HP Power Steering Can also be used for MCM PS
System
32-892825012 113C56 189.28
Used to connect dual station/ Helm together (12 ft) Power Steering
Verado Engines ‑ 135 to 300 HP Power Steering Can also be used for MCM PS
System
32-892825014 111C94 186.58
Used to connect dual station/ Helm together (14 ft) Power Steering
Verado Engines ‑ 135 to 300 HP Power Steering Can also be used for MCM PS
System
32-892825016 113C70 189.51
Used to connect dual station/ Helm together (16 ft) Power Steering 22-892518 33C25 55.43
Verado Engines ‑ 135 to 300 HP Power Steering Can also be used for MCM PS Fitting‑ Bulkhead 3 in. ‑ Male To Male
System Power Steering Fittings.
32-892825018 123C37 205.63 Used to install bulkhead installations 3/4 in. to 3 in. maximum wall thickness grip
Used to connect dual station/ Helm together (18 ft) Power Steering length.
Verado Engines ‑ 135 to 300 HP Power Steering Can also be used for MCM PS
System
32-892825020 128C73 214.56
Used to connect dual station/ Helm together (20 ft) Power Steering
Verado Engines ‑ 135 to 300 HP Power Steering Can also be used for MCM PS
System
2021 Canada Accessories Guide 613
STEERING
STRAIGHT FITTING 9/16 IN. CAP MALE 11/16 IN.
CONTROLS AND RIGGING
22-892519 16C55 27.57 22-892523 9C91 16.53
Cap ‑ Zinc plated brass 11/16 in. Male. Power Steering Fitting‑ allows you to cap
pressure hoses for service
Fitting‑ Straight 9/16 in. to Cylinder ‑ 6 to 4.
Power Steering fittings. CAP FEMALE 9/16 IN.
Allows straight cylinder hose connections at Outboard Steering cylinder vs 90
degree (replaces 889552)
TEE FITTING MALE 9/16 IN.
22-892524 18C62 31.05
Cap ‑ Zinc plated brass 9/16 in. Female. Power Steering Fittings‑ allows you to cap
cylinder:helm (right and left ) fittings for service
Verado Engines ‑ 135 to 300 HP Power Steering
22-892520 30C48 50.80
Tee Fitting Male 9/16 in. Power Steering Fitting‑ Allows Tee connection of the CAP BRASS FEMALE 11/16 IN.
cylinder hose ends
Verado Engines ‑ 135 to 300 HP Power Steering
TEE FITTING FEMALE 9/16 IN.
22-892525 18C62 31.05
Cap ‑ Zinc plated brass Female 11/16 in. Power Steering Fittings‑ Allows you to
cap helm for service
22-892521 32C86 54.79 UNION FITTING MALE TO MALE 9/16 IN.
Tee Fitting Female 9/16 in. Power Steering Fitting‑ Allows "T" connection of 2
cylinder hoses ends with cylinder of helm fittings
Verado Engines ‑ 135 to 300 HP Power Steering
CAP MALE 9/16 IN.
22-892526 18C62 31.05
Union Fitting Male to Male 9/16 in. Power Steering Fittings‑‑ For connecting 2
cylinder hoses end to end
22-892522 9C91 16.53
Cap ‑ Zinc plated brass 9/16 in. Male. Power Steering Fitting‑ allows you to cap
cylinder hoses for service
614 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING
UNION FITTING MALE TO MALE 11/16 IN. DTS BULKHEAD PLATE - FITTINGS NOT INCLUDED CONTROLS AND RIGGING
22-892527 25C48 42.47 8M0146246 455C95 759.91
Union Fitting Male to Male 11/16 in. Power Steering Fittings‑ to connect 2 pressure Improved DTS bulkhead plate with threaded passage for multiple hose
hoses end to end installations.
Multiple Hose Installations.
ELBOW FITTING FEMALE 9/16 IN.
ELBOW- FEMALE TO MALE
22-892528 30C48 50.80
Elbow Fitting Female to Male 9/16 in.. Power Steering Fittings to allow 90 degree 22-897726 29C71 49.52
connection at helm (R&L port) Female to Male .6875 Inch (11/16)
Verado Engines ‑ 135 to 300 HP Power Steering Power Steering Fittings‑ To allow 90 degree connection at helm (R&L port)
Power Steering Fittings
FITTING KIT BULKHEAD
POWER STEERING DIAGNOSTICS ADAPTOR - GEN C
84-8M0156168 31C30 52.16
This adaptor is used to plug in to the Gen C or Gen C HD power steering pumps to
access diagnostic information.
Compatible with the Gen C and Gen C HD power steering pumps.
POWER STEERING HOSE KITS-JOYSTICK
64-8M0088973 64C62 107.69 PILOTING
Improved bulkhead fitting kit with chrome housing for multiple hose installations.
Multiple Hose Installations for Compression style hoses. JOYSTICK PILOTING STEERING HOSES
STANDARD BULKHEAD PLATE - FITTINGS NOT
INCLUDED
32-8M0078210 104C04 173.39
Kit includes two hoses of the same length (10 ft) for use on Joystick Piloting. The
8M0147011 90C35 150.58 hoses will route from the pump to the bulk head fitting.
Improved standard bulkhead plate with threaded passage for multiple hose Can be used on Verado 250‑350 HP and 400R Joystick installations.
installations. JOYSTICK PILOTING HOSES
Multiple Hose Installations. 32-8M0078211 121C26 202.08
Kit includes two hoses of the same length (12 ft) for use on Joystick Piloting. The
hoses will route from the pump to the bulk head fitting.
Can be used on Verado 250‑350 HP and 400R Joystick installations.
2021 Canada Accessories Guide 615
STEERING
32-8M0078212 134C16 223.59 TIE BAR KITS
Kit includes two hoses of the same length (14 ft) for use on Joystick Piloting. The
CONTROLS AND RIGGING Kit includes two hoses of the same length (16 ft) for use on Joystick Piloting. The
hoses will route from the pump to the bulk head fitting.
HEAVY DUTY TIE BAR KIT- DUAL
Can be used on Verado 250‑350 HP and 400R Joystick installations.
32-8M0078213
233.00
139C80
hoses will route from the pump to the bulk head fitting.
Can be used on Verado 250‑350 HP and 400R Joystick installations.
154C18
256.96
32-8M0078214
Kit includes two hoses of the same length (18 ft) for use on Joystick Piloting. The
hoses will route from the pump to the bulk head fitting.
Can be used on Verado 250‑350 HP and 400R Joystick installations.
32-8M0078215 174C45 290.76
Kit includes two hoses of the same length (20 ft) for use on Joystick Piloting. The
hoses will route from the pump to the bulk head fitting.
Can be used on Verado 250‑350 HP and 400R Joystick installations. 8M0096314 755A38 1079.12
32-8M0078216 174C21 290.35 Heavy Duty 26 inch Tie Bar allows two engines to be attached together +/‑ 1.25
Kit includes two hoses of the same length (22 ft) for use on Joystick Piloting. The inches.
hoses will route from the pump to the bulk head fitting. Tie Bar has been engineered for higher horse power applications with improved
Can be used on Verado 250‑350 HP and 400R Joystick installations. retaining design.
26 +/‑ 1.25 inches
32-8M0078217 195C35 325.59 2.6L L6 Gen 5 and 4.6L Verado Engines
Kit includes two hoses of the same length (24 ft) for use on Joystick Piloting. The 8M0096315 787A38 1124.83
hoses will route from the pump to the bulk head fitting.
Can be used on Verado 250‑350 HP and 400R Joystick installations. Heavy Duty 28 inch Tie Bar allows two engines to be attached together +/‑ 1.25
inches.
32-8M0032520 227C10 378.50 Tie Bar has been engineered for higher horse power applications with improved
Kit includes two hoses of same length (26 ft) for use on Joystick Piloting. The retaining design.
hoses will route from the pump to the bulk head fitting. 28 +/‑ 1.25 inches
Can be used on Verado 250‑350 HP and 400R Joystick installations. 2.6L L6 Gen 5 and 4.6L Verado Engines.
32-8M0032530 242C29 403.82 8M0096316 799A25 1141.77
Kit includes two hoses of the same length (28 ft) for use on Joystick Piloting. The Heavy Duty 30 inch Tie Bar allows two engines to be attached together +/‑ 1.25
hoses will route from the pump to the bulk head fitting. inches.
Tie Bar has been engineered for higher horse power applications with improved
Can be used on Verado 250‑350 HP and 400R Joystick installations. retaining design.
32-8M0032547 254C18 423.64 30 +/‑ 1.25 inches
Kit includes two hoses of the same length (30 ft) for use on Joystick Piloting. The 2.6L L6 Gen 5 and 4.6L Verado Engines.
hoses will route from the pump to the bulk head fitting. 8M0096317 802A50 1146.42
Can be used on Verado 250‑350 HP and 400R Joystick installations. Heavy Duty 32 inch Tie Bar allows two engines to be attached together +/‑ 1.25
32-8M0032630 267C20 445.33 inches.
Kit includes two hoses of the same length (32 ft) for use on Joystick Piloting. The Tie Bar has been engineered for higher horse power applications with improved
hoses will route from the pump to the bulk head fitting. retaining design.
32 +/‑ 1.25 inches
Can be used on Verado 250‑350 HP and 400R Joystick installations.
2.6L L6 Gen 5 and 4.6L Verado Engines.
JPO BULKHEAD PLATE - FITTINGS NOT INCLUDED 8M0096319 809A59 1156.55
Heavy Duty 34 inch Tie Bar allows two engines to be attached together +/‑ 1.25
inches.
Tie Bar has been engineered for higher horse power applications with improved
retaining design.
34 +/‑ 1.25 inches
2.6L L6 Gen 5 and 4.6L Verado Engines.
8M0097267 813A74 1162.47
Heavy Duty 36 inch Tie Bar allows two engines to be attached together +/‑ 1.25
inches.
Tie Bar has been engineered for higher horse power applications with improved
retaining design.
36 +/‑ 1.25 inches
2.6L L6 Gen 5 and 4.6L Verado Engines.
8M0146247 503C93 839.88
Improved bulkhead plate with threaded passage for multiple hose installations.
Joystick, multiple Hose Installations.
616 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING
HEAVY DUTY TIE BAR ADD AN ENGINE KIT 64-8M0063474 490C98 818.30
This tie bar can be used on a dual installation with just one cylinder. 28 inch length
with 1 inch of total adjustability.
75‑115 HP EFI 4 Stroke OB (s/n 1B366823 & above), 150 4 Stroke, 135‑200 4
cylinder Verado, OptiMax, and 3.4 & 4.6L FourStrokes up to 250hp. Use only with
Mercury cylinders for dual engine applications.
64-8M0063475 498C89 831.51 CONTROLS AND RIGGING
This tie bar can be used on a dual installation with just one cylinder. 30 inch length
with 1 inch of total adjustability.
75‑115 HP EFI 4 Stroke OB (s/n 1B366823 & above), 150 4 Stroke, 135‑200 4
cylinder Verado, OptiMax, and 3.4 & 4.6L FourStrokes up to 250hp. Use only with
Mercury cylinders for dual engine applications.
64-8M0063476 506C84 844.72
8M0096320 682C96 1138.27 This tie bar can be used on a dual installation with just one cylinder. 32 inch length
Add An Engine 26 inch Tie Bar allows triple and quad engines to be attached with 1 inch of total adjustability.
together +/‑ 1.25 inches. 75‑115 HP EFI 4 Stroke OB (s/n 1B366823 & above), 150 4 Stroke, 135‑200 4
Tie Bar has been engineered for higher horse power applications with improved cylinder Verado, OptiMax, and 3.4 & 4.6L FourStrokes up to 250hp. Use only with
heavy duty design. Mercury cylinders for dual engine applications.
26 +/‑ 1.25 inches 64-8M0063477 514C76 857.92
2.6L L6 Gen 5 and 4.6L Verado Engines. This tie bar can be used on a dual installation with just one cylinder. 34 inch length
8M0096321 664C17 1106.95 with 1 inch of total adjustability.
Add An Engine 28 inch Tie Bar allows triple and quad engines to be attached 75‑115 HP EFI 4 Stroke OB (s/n 1B366823 & above), 150 4 Stroke, 135‑200 4
together +/‑ 1.25 inches. cylinder Verado, OptiMax, and 3.4 & 4.6L FourStrokes up to 250hp. Use only with
Tie Bar has been engineered for higher horse power applications with improved Mercury cylinders for dual engine applications.
heavy duty design.
28 +/‑ 1.25 inches TIE BARS - DUAL ENGINES
2.6L L6 Gen 5 and 4.6L Verado Engines.
8M0096322 675C83 1126.40
Add An Engine 30 inch Tie Bar allows triple and quad engines to be attached
together +/‑ 1.25 inches.
Tie Bar has been engineered for higher horse power applications with improved
heavy duty design.
30 +/‑ 1.25 inches
2.6L L6 Gen 5 and 4.6L Verado Engines.
8M0096323 676C67 1127.79
Add An Engine 32 inch Tie Bar allows triple and quad engines to be attached
together +/‑ 1.25 inches.
Tie Bar has been engineered for higher horse power applications with improved
heavy duty design. 64-892789Q22 498C89 831.51
32 +/‑ 1.25 inches 26 Inches long with 1 inch of total adjustability.
2.6L L6 Gen 5 and 4.6L Verado Engines. Outboard centerline spacing of 66.0 cm (26 in.)
8M0096324 679C61 1132.69 For use with the 75‑115 hp EFI FourStroke (s/n 1B366823 & above), 175‑200 L4
Add An Engine 34 inch Tie Bar allows triple and quad engines to be attached Verado, V6 OptiMax, and 3.4 & 4.6L FourStrokes ‑ Up to 600 HP dual Install with
together +/‑ 1.25 inches. one Counter Rotation Engine. Also used on multiple 150 4 strokes.
Tie Bar has been engineered for higher horse power applications with improved 64-892789Q23 506C84 844.72
heavy duty design.
34 +/‑ 1.25 inches 28 Inches long with 1 inch of total adjustability.
Outboard centerline spacing of 71.1 cm (28 in.)
2.6L L6 Gen 5 and 4.6L Verado Engines. For use with the 75‑115 hp EFI FourStroke (s/n 1B366823 & above), 175‑200 L4
8M0097268 716C87 1194.79 Verado, V6 OptiMax, and 3.4 & 4.6L FourStrokes ‑ Up to 600 HP dual Install with
Add An Engine 36 inch Tie Bar allows triple and quad engines to be attached one Counter Rotation Engine. Also used on multiple 150 4 strokes.
together +/‑ 1.25 inches. 64-892789Q25 522C69 871.13
Tie Bar has been engineered for higher horse power applications with improved
heavy duty design. 30 Inches long with 1 inch of total adjustability.
36 +/‑ 1.25 inches Outboard centerline spacing of 76.2 cm (30 in.)
2.6L L6 Gen 5 and 4.6L Verado Engines. For use with the 75‑115 hp EFI FourStroke (s/n 1B366823 & above), 175‑200 L4
Verado, V6 OptiMax, and 3.4 & 4.6L FourStrokes ‑ Up to 600 HP dual Install with
TIE BAR- SINGLE CYLINDER DUAL ENGINE one Counter Rotation Engine. Also used on multiple 150 4 strokes.
64-892789Q26 530C60 884.33
32 Inches long with 1 inch of total adjustability.
Outboard centerline spacing of 81.3 cm (32 in.)
For use with the 75‑115 hp EFI FourStroke (s/n 1B366823 & above), 175‑200 L4
Verado, V6 OptiMax, and 3.4 & 4.6L FourStrokes ‑ Up to 600 HP dual Install with
one Counter Rotation Engine. Also used on multiple 150 4 strokes.
64-892789Q27 538C53 897.54
34 Inches long with 1 inch of total adjustability.
Outboard centerline spacing of 86.4 cm (34 in.)
For use with the 75‑115 hp EFI FourStroke (s/n 1B366823 & above), 175‑200 L4
Verado, V6 OptiMax, and 3.4 & 4.6L FourStrokes ‑ Up to 600 HP dual Install with
one Counter Rotation Engine. Also used on multiple 150 4 strokes.
64-8M0063473 483C07 805.14 64-892789Q24 576C18 960.30
This tie bar can be used on a dual installation with just one cylinder. 26 inch length 36 Inches long with 1 inch of total adjustability.
with 1 inch of total adjustability. Outboard centerline spacing of 91.5 cm (36 in.)
75‑115 HP EFI 4 Stroke OB (s/n 1B366823 & above), 150 4 Stroke, 135‑200 4 For use with the 75‑115 hp EFI FourStroke (s/n 1B366823 & above), 175‑200 L4
cylinder Verado, OptiMax, and 3.4 & 4.6L FourStrokes up to 250hp. Use only with Verado, V6 OptiMax, and 3.4 & 4.6L FourStrokes ‑ Up to 600 HP dual Install with
Mercury cylinders for dual engine applications one Counter Rotation Engine. Also used on multiple 150 4 strokes.
2021 Canada Accessories Guide 617
STEERING
TIE BARS - TRIPLE ENGINES TIE BAR KIT - PORT MOUNTED KICKER
CONTROLS AND RIGGING
898370A03 364C28 607.13
Tie bar for Manual Hydraulic Steering System to attach primary engine to kicker
engine. Engine will be mounted on the Port side of the primary engine
892789Q32 1717A55 2453.65 Verado 175‑200 HP as well as Mercury's bolt‑on steering system for OptiMax,
26 Inches long with 1 inch of total adjustability. 75‑115 FourStrokes, and the 3.4 and 4.6L FourStrokes.
Outboard centerline spacing of 66.0 cm (26 in.) TIE BAR KIT - STARBOARD MOUNTED KICKER
For use with the 175‑200 L4 Verado, V6 OptiMax, and 3.4 & 4.6L FourStrokes.
Also used on multiple 150 4 strokes.
892789Q33 1909A79 2728.27
28 Inches long with 1 inch of total adjustability.
Outboard centerline spacing of 71.1 cm (28 in.)
For use with the 175‑200 L4 Verado, V6 OptiMax, and 3.4 & 4.6L FourStrokes.
Also used on multiple 150 4 strokes.
LIQUID TIE BAR KIT
898966A02 395C97 659.96
Tie bar for Manual Hydraulic Steering System to attach primary engine to kicker
engine. Engine will be mounted on the Starboard side of the primary engine
Verado 175‑200 HP as well as Mercury's bolt‑on steering system for OptiMax,
75‑115 FourStrokes, and 3.4 & 4.6L FourStrokes.
DRIVE BRACKET ONLY
893396A02 372C99 621.64
Sequence valve for use with dual engines mounted more than 34 inches apart, or 2
sets of 2, for a total of 4 engines. With additional steering cylinder with wide dual
engines , steering cylinders are connected in series . Valve allows for alignment /
re‑alignment. Add additional cylinder on counter rotation engines. Dual engines
require 1 valve, 2 cylinders. Quad engines still 1 valve, but 4 cylinders.
2005 and newer Verado Engines 135‑450 HP, and can also be used with the
75‑115 EFI FourStroke outboard (s/n 1B366823 & above).
BRACKET- TIE BAR (WITH BOSSES)
67-892763A15 99C01 165.00
Heavy duty stainless steel bracket.
Bracket used on Panther Model 55‑2700
Panther Model 55‑2750
BRACKET-KICKER ENGINE ATTACHMENT
892367T03 118C73 197.87
Bracket that allows you to install the magnet on the Rudder Feedback Kit.
Bracket with bosses needed to mount the magnet.
Verado 200‑300 HP engines.
892822A02 77C22 128.70
Unique bracket used to hook up a kicker engine with Verado. Special bracket is
attached to Verado engine to allow attachments.
2005 Verado Engines 200‑300 HP
618 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING
KICKER ENGINE BRACKET HYDRAULIC STEERING - BASIC AND HEAVY DUTY
8M0097850 88C52 147.53
Bracket is used to mount a kicker engine with a Verado engine. SYSTEMS
Bracket is used on Gen 5 Verado engines
TROLLING MOTOR TIE BAR KIT WITHOUT DRIVE UNIT Both the Basic and the Heavy Duty Hydraulic Systems in this section
will use the hoses listed. (8M0053474 to 8M0053492) Note that the
Basic is for single engines only ‑ 150 HP and below. The Heavy Duty CONTROLS AND RIGGING
systems are for single engines above 150 HP as well as multiple
engines. Fittings are listed in this section that can be installed to the
compression style connections.
CYLINDER - HYDRAULIC - STANDARD
67-892763A24 293C94 489.90
Heavy duty auxiliary steering kit connects an auxiliary trolling motor to your main
motor. It is 1/2 inch thick. Ideal for large Walleye/ Great Lakes boats with rough
water running conditions
Panther Model 55‑2700 8M0141911 395C97 659.96
This Basic hydraulic cylinder has the same robust performance design requirement
TROLLING MOTOR TIE BAR KIT as our heavy duty cylinder. It is qualified to the same 300,000 cycle as our other
steering systems, has high strength fasteners, stainless steel arm, heavy duty triple
seal cartridges for enhanced duribilty and longevity high quality fittings using
swaged compression style hose connections.
All Single Outboard ‑ 150 HP and below
(1.5L Opti engine requires the special arm ‑ cylinder 8M0056619)
CYLINDER - HYDRAULIC - STANDARD
67-892763A14 308C85 514.75
Heavy duty auxiliary steering kit connects an auxiliary trolling motor to your main
motor. It is 1/2 inch thick. Drive bracket is 100% stainless steel. Ideal for large
Walleye/ Great Lakes boats with rough water running conditions
Panther Model 55‑2700
175HP+ KICKER ELECTRICAL KIT 8M0056619 435C57 725.94
This Basic hydraulic cylinder has the same robust performance design requirement
as our heavy duty cylinder. It is qualified to the same 300,000 cycle as our other
steering systems, has high strength fasteners, stainless steel arm, with a special
bend for clearance, heavy duty triple seal cartridges for enhanced duribilty and
longevity. High quality fittings using swaged compression style hose connections.
Mercury OB ‑ 1.5L OptiMax
HYDRAULIC HELM - BASIC SYSTEM
8M0149838 210C55 350.92
This system allows you to run your kicker engine and use the power steering
system without your primary engine running. This system allows you to connect to
a deep cell battery (not your starter battery) and the system will provide normal
power steering from the wheel. The system will alert you when your auxiliary
battery is below 9.5 volts. This signal means that you must start your primary
engine to change the battery system. This kit will save the starting battery for
primary starting use only. Must select the appropriate isolator and isolator cables
to be paired with this system, dependent on engine configuration.
175hp+ power steering systems with a kicker engine. 200‑350 Verado 2015 (Gen
5) and newer and all 175‑300hp 3.4L and 4.6L engines.
8M0050098 451C97 753.30
This hydraulic helm is a std 20 CC / 1.2 Cu Inch helm with compression style
fittings. It is used with the 8M0054993 Basic cylinder. The shaft is anodized steel
with a composite tank. The pressure relief is 1000 PSI for high torque
applicactions for improved performance. (5.2 Lock to lock wheel turns).
Single engine 75‑150 HP ( includes new 150 HP 4 Stroke)
2021 Canada Accessories Guide 619
STEERING
HYDRAULIC HELM - BASIC SYSTEM CYLINDER WITH COMPRESSION STYLE FITTINGS
CONTROLS AND RIGGING
556C09
8M0050099
This hydraulic helm is a Tilt 20 CC / 1.2 Cu Inch helm with compression style 926.81
fittings. It is used with the 8M0054993 Basic cylinder. The shaft is anodized steel 8M0050097 601C77 1002.93
with a composite tank. The pressure relief is 1000 PSI for high torque
applicactions for improved performance. (5.2 Lock to lock wheel turns). Heavy Duty Hydraulic standard cylinder that uses compression hoses 8M0053474
Single engine 75‑150 HP OB (Includes new 150 HP 4 stroke) ‑ 8M005053491. This cylinder is tested to Mercury's rigid standards that include
higher loads and cycle testing to 300,000 cycles. It includes machined, high
HYDRAULIC HELM AND CYLINDER- SMALL- STD W-O strength fasteners, electro polished SS arm, and heavy duty triple seal cartridges
HOSES for enhanced duribility and longevity
135‑300 HP OPTI Max Outboards and 4 Cylinder Verado (Hydraulic only) Use on
single, dual and triple installations
CYLINDER WITH COMPRESSION STYLE FITTINGS-
PORT
8M0077699 815A22 1164.59
This kit includes a small cylinder and a new 1.2 Cubic Inch (20cc) Standard Helm.
They do not come with hoses, you will need to order Compression Style fitting
hoses 8M0053474 thru 8M0053491 hose kits (1000 PSI relief).
Used on any brand Single Engine Outboard 150 HP and below 8M0056145 657C29 1095.47
HYDRAULIC HELM AND CYLINDER- SMALL- TILT W-O Heavy Duty Hydraulic cylinder counter rotation that uses compression hoses
HOSES 8M0053474 ‑ 8M005053491. This cylinder is tested to Mercury's rigid standards
that include higher loads and cycle testing to 300,000 cycles. It includes machined,
high strength fasteners, electro polished SS arm, and heavy duty triple seal
cartridges for enhanced duribility and longevity
135‑300 HP OPTI Max Outboards and 4 Cylinder Verado (Hydraulic only) Use on
dual and triple installations (Counter rotation )
HYDRAULIC HELM PUMP - COMPRESSION STYLE
FITTINGS
8M0077701 914A62 1306.60
This kit includes a small cylinder and a new 1.2 Cubic Inch (20cc) Tilt Helm. They
do not come with hoses, you will need to order Compression Style fitting hoses
8M0053474 thru 8M0053491 hose kits (1000 PSI relief).
Used on any brand Single Engine Outboard 150 HP and below
8M0056139 614C28 1023.79
Front Mount Standard helm ‑ 1.5 cu in (25 CC.) displacement. Approximately 5
turns lock to lock on singles (Use Compression style fittings and hoses)
and 8 on dual cylinders
Compact design
Built‑in valve for positive rudder lock
Integral relief valve for over pressure protection‑ 1500 PSI
Use with cylinder 8M0050097 and hoses 8M0053474 thru 8M0053492. Use on
single or multiple OptiMax powered boats. Use on Verado 4 cylinder Hydraulic
steering installation.
620 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING
HYDRAULIC HELM PUMP - COMPRESSION STYLE HYDRAULIC HELM PUMP -Q/S
FITTINGS CONTROLS AND RIGGING
8M0056143 617C71 1029.54
8M0056140 696C87 1161.46 Front Mount 2.4 cu in (39 CC) displacement. Approximately 3 turns lock to lock on
Front Mount Tilt helm ‑ 1.5 cu in (25 CC.) displacement. Approximately 5 turns singles (Use Compression style fittings and hoses)
lock to lock on singles and 6.5 on dual cylinders
and 8 on dual cylinders Compact design
Compact design Built‑in valve for positive rudder lock
Built‑in valve for positive rudder lock Integral relief valve for over pressure protection
Integral relief valve for over pressure protection ‑ 1500 PSI (Use Hydraulic Steering for Verado 135 to 175‑4 stroke engines
Compression style fittings and hoses) Also can be used on OptiMax with Mercury hydraulic cylinder and hoses. Also can
Use with cylinder 8M0050097 and hoses 8M0053474 thru 8M0053492. Use on be used on OptiMax with Mercury hydraulic cylinder and hoses Also can be used
single or multiple OptiMax powered boats. Use on Verado 4 cylinder Hydraulic on 75‑115 4 stroke and 1.5L opti 75‑115 HP
steering installation. Use cylinder 8M0050097 for Std and 8M0056145 for counter for multiple engine
installs. Hose series is 8M0053474 thru 8M0053492
HYDRAULIC HELM PUMP - COMPRESSION STYLE
FITTINGS HYDRAULIC HELM PUMP -Q/S-TILT
8M0056141 615C04 1025.08 8M0056144 720C66 1201.08
Front Mount Standard helm ‑ 2.0 cu in (33CC.) displacement. Approximately 4.7 Front Mount 2.4 cu in (39 CC) displacement. Approximately 3 turns lock to lock on
turns lock to lock on singles singles (Use Compression style fittings and hoses)
and 7.3 on dual cylinders and 6.5 on dual cylinders
Compact design Compact design
Built‑in valve for positive rudder lock Tilt Range of 48 Deg and 5 locking positions
Integral relief valve for over pressure protection ‑ 1500 PSI (Use Built‑in valve for positive rudder lock
Compression style fittings and hoses) Integral relief valve for over pressure protection
Use with cylinder 8M0050097 and hoses 8M0053474 thru 8M0053492. Use on Hydraulic Steering for Verado 135 to 175‑4 stroke engines
single or multiple OptiMax powered boats. Use on Verado 4 cylinder Hydraulic Also can be used on OptiMax with Mercury hydraulic cylinder and hoses. Also can
steering installation. be used on OptiMax with Mercury hydraulic cylinder and hoses Also can be used
on 75‑115 4 stroke and 1.5L opti 75‑115 HP
HYDRAULIC HELM PUMP - COMPRESSION STYLE Use cylinder 8M0050097 for Std and 8M0056145 for counter for multiple engine
FITTINGS installs. Hose series is 8M0053474 thru 8M0053492
HYDRAULIC STEERING KIT -Q/S
8M0056142 718C63 1197.71
Front Mount Tilt helm ‑ 2.0 cu in (33 CC.) displacement. Approximately 4.7 turns 8M0073922 1227A48 1753.52
lock to lock on singles
and 7.3 on dual cylinders Quicksilver 1.5 cu in displacement Std Helm kit with Cylinder and Hoses. (14 ft)
Compact design Approximately 5 turns lock to lock on a single engine
Built‑in valve for positive rudder lock Hydraulic Steering ‑ 75 HP engines and above (Use with Compression type
Integral relief valve for over pressure protection ‑ 1500 PSI (Use hoses 8M0053473 thru 8M0053449)
Compression style fittings and hoses) 8M0073923 1232A21 1760.31
Use with cylinder 8M0050097 and hoses 8M0053474 thru 8M0053492. Use on Quicksilver 1.5 cu in displacemen Std Helm kit with Cylinder and Hoses. (16 ft)
single or multiple OptiMax powered boats. Use on Verado 4 cylinder Hydraulic Approximately 5 turns lock to lock on a single engine
steering installation.
Hydraulic Steering ‑ 75 HP engines and above (Use with Comptression type
hoses 8M0053473 thru 8M0053449)
2021 Canada Accessories Guide 621
STEERING
190.05
114C03
32-8M0053481
8M0073924 1235A41 1764.88 New high strength 1500 PSI hose with compression type fittings. Fittings are made
Quicksilver 1.5 cu in displacemen Std Helm kit with Cylinder and Hoses. (18 ft)
CONTROLS AND RIGGING hoses 8M0053473 thru 8M0053449) 1251A24 1787.50 8M0050097/8M0054145 Heavy Duty systems, Also match to helms 203.28
of brass with a nickel plating for extra corrision resistance. (10 ft)
Approximately 5 turns lock to lock on a single engine
Hydraulic Steering ‑ 75 HP engines and above (Use with Comptression type
Used with 8M0054993/8M0056619 Basic Cylinders as well as the
8M0050098/8M0050099 and 8M0056139 thru 8M0056144
8M0073925
32-8M0053482
121C97
Quicksilver 1.5 cu in displacemen Std Helm kit with Cylinder and Hoses. (20 ft)
Approximately 5 turns lock to lock on a single engine
New high strength 1500 PSI hose with compression type fittings. Fittings are made
of brass with a nickel plating for extra corrision resistance. (12 ft)
Hydraulic Steering ‑ 75 HP engines and above (Use with Comptression type
Used with 8M0054993/8M0056619 Basic Cylinders as well as the
hoses 8M0053473 thru 8M0053449)
8M0073927
8M0050098/8M0050099 and 8M0056139 thru 8M0056144
Quicksilver 1.5 cu in displacemen Std Helm kit with Cylinder and Hoses. (22 ft)
32-8M0053483
130C87
Approximately 5 turns lock to lock on a single engine 1267A07 1810.11 8M0050097/8M0054145 Heavy Duty systems, Also match to helms 218.12
Hydraulic Steering ‑ 75 HP engines and above (Use with Comptression type New high strength 1500 PSI hose with compression type fittings. Fittings are made
hoses 8M0053473 thru 8M0053449) of brass with a nickel plating for extra corrision resistance. (14 ft)
8M0073928 1282A90 1832.73 Used with 8M0054993/8M0056619 Basic Cylinders as well as the
8M0050097/8M0054145 Heavy Duty systems, Also match to helms
Quicksilver 1.5 cu in displacemen Std Helm kit with Cylinder and Hoses. (24 ft) 8M0050098/8M0050099 and 8M0056139 thru 8M0056144
Approximately 5 turns lock to lock on a single engine 32-8M0053484 139C38 232.31
Hydraulic Steering ‑ 75 HP engines and above (Use with Comptression type
hoses 8M0053473 thru 8M0053449) New high strength 1500 PSI hose with compression type fittings. Fittings are made
of brass with a nickel plating for extra corrision resistance. (16 ft)
HYDRAULIC HOSE - COMPRESSION STYLE FITTINGS Used with 8M0054993/8M0056619 Basic Cylinders as well as the
8M0050097/8M0054145 Heavy Duty systems, Also match to helms
8M0050098/8M0050099 and 8M0056139 thru 8M0056144
32-8M0053485 147C92 246.53
New high strength 1500 PSI hose with compression type fittings. Fittings are made
of brass with a nickel plating for extra corrision resistance. (18 ft)
Used with 8M0054993/8M0056619 Basic Cylinders as well as the
8M0050097/8M0054145 Heavy Duty systems, Also match to helms
8M0050098/8M0050099 and 8M0056139 thru 8M0056144
32-8M0053486 154C99 258.32
New high strength 1500 PSI hose with compression type fittings. Fittings are made
of brass with a nickel plating for extra corrision resistance. (20 ft)
Used with 8M0054993/8M0056619 Basic Cylinders as well as the
32-8M0053474 87C10 145.18 8M0050097/8M0054145 Heavy Duty systems, Also match to helms
8M0050098/8M0050099 and 8M0056139 thru 8M0056144
New high strength 1500 PSI hose with compression type fittings. Fittings are made
of brass with a nickel plating for extra corrision resistance. (2 ft) 32-8M0053487 162C06 270.10
Used with 8M0054993/8M0056619 "Basic" Cylindersas well as the New high strength 1500 PSI hose with compression type fittings. Fittings are made
8M0050097/8M0054145 "Heavy Duty" systems, Also match to helms of brass with a nickel plating for extra corrision resistance. (22 ft)
8M0050098/8M0050099 and 8M0056139 thru 8M0056144 Used with 8M0054993/8M0056619 Basic Cylinders as well as the
32-8M0053475 90C29 150.47 8M0050097/8M0054145 Heavy Duty systems, Also match to helms
8M0050098/8M0050099 and 8M0056139 thru 8M0056144
New high strength 1500 PSI hose with compression type fittings. Fittings are made
of brass with a nickel plating for extra corrision resistance. (3 ft) 32-8M0053488 170C59 284.31
Used with 8M0054993/8M0056619 Basic Cylinders as well as the New high strength 1500 PSI hose with compression type fittings. Fittings are made
8M0050097/8M0054145 Heavy Duty systems, Also match to helms of brass with a nickel plating for extra corrision resistance. (24 ft)
8M0050098/8M0050099 and 8M0056139 thru 8M0056144 Used with 8M0054993/8M0056619 Basic Cylinders as well as the
32-8M0053476 93C44 155.72 8M0050097/8M0054145 Heavy Duty systems, Also match to helms
8M0050098/8M0050099 and 8M0056139 thru 8M0056144
New high strength 1500 PSI hose with compression type fittings. Fittings are made
of brass with a nickel plating for extra corrision resistance. (4 ft) 32-8M0053489 182C00 303.32
Used with 8M0054993/8M0056619 Basic Cylinders as well as the New high strength 1500 PSI hose with compression type fittings. Fittings are made
8M0050097/8M0054145 Heavy Duty systems, Also match to helms of brass with a nickel plating for extra corrision resistance. (26 ft)
8M0050098/8M0050099 and 8M0056139 thru 8M0056144 Used with 8M0054993/8M0056619 Basic Cylinders as well as the
32-8M0053477 96C61 161.03 8M0050097/8M0054145 Heavy Duty systems, Also match to helms
8M0050098/8M0050099 and 8M0056139 thru 8M0056144
New high strength 1500 PSI hose with compression type fittings. Fittings are made 312.71
of brass with a nickel plating for extra corrision resistance. (5 ft) 32-8M0053490 187C62
Used with 8M0054993/8M0056619 Basic Cylinders as well as the New high strength 1500 PSI hose with compression type fittings. Fittings are made
8M0050097/8M0054145 Heavy Duty systems, Also match to helms of brass with a nickel plating for extra corrision resistance. (28 ft)
8M0050098/8M0050099 and 8M0056139 thru 8M0056144 Used with 8M0054993/8M0056619 Basic Cylinders as well as the
32-8M0053478 99C77 166.30 8M0050097/8M0054145 Heavy Duty systems, Also match to helms
8M0050098/8M0050099 and 8M0056139 thru 8M0056144
New high strength 1500 PSI hose with compression type fittings. Fittings are made
of brass with a nickel plating for extra corrision resistance. (6 ft) 32-8M0053491 194C70 324.48
Used with 8M0054993/8M0056619 Basic Cylinders as well as the New high strength 1500 PSI hose with compression type fittings. Fittings are made
8M0050097/8M0054145 Heavy Duty systems, Also match to helms of brass with a nickel plating for extra corrision resistance. (30 ft)
8M0050098/8M0050099 and 8M0056139 thru 8M0056144 Used with 8M0054993/8M0056619 Basic Cylinders as well as the
32-8M0053479 102C94 171.57 8M0050097/8M0054145 Heavy Duty systems, Also match to helms
8M0050098/8M0050099 and 8M0056139 thru 8M0056144
New high strength 1500 PSI hose with compression type fittings. Fittings are made
of brass with a nickel plating for extra corrision resistance. (7 ft) 32-8M0053492 207C10 345.19
Used with 8M0054993/8M0056619 Basic Cylinders as well as the New high strength 1500 PSI hose with compression type fittings. Fittings are made
8M0050097/8M0054145 Heavy Duty systems, Also match to helms of brass with a nickel plating for extra corrision resistance. (32 ft)
8M0050098/8M0050099 and 8M0056139 thru 8M0056144 Used with 8M0054993/8M0056619 Basic Cylinders as well as the
32-8M0053480 106C12 176.88 8M0050097/8M0054145 Heavy Duty systems, Also match to helms
8M0050098/8M0050099 and 8M0056139 thru 8M0056144
New high strength 1500 PSI hose with compression type fittings. Fittings are made
of brass with a nickel plating for extra corrision resistance. ( 8 ft)
Used with 8M0054993/8M0056619 Basic Cylinders as well as the
8M0050097/8M0054145 Heavy Duty systems, Also match to helms
8M0050098/8M0050099 and 8M0056139 thru 8M0056144
622 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING
VENTED HELM CAP-VCAP VENTED HELM CAP-VCAP CONTROLS AND RIGGING
64-891667Q01 9C11 15.20 64-891667Q01 9C11 15.20
VCAP Vented helm cap for use on Q/S helms 891665Q02 and 891666Q01 VCAP Vented helm cap for use on Q/S helms 891665Q02 and 891666Q01
NON VENTED CAP ADAPTER FOR POWER PURGE
19-898432 18C90 31.51 64-889934A06 39C53 65.88
Required for dual station installations of steering system. Adapter for the Power Purge system
Hydraulic Steering for Verado 135 to 200‑4 stroke engines
REMOTE FILL KIT FOR HYDRAULIC STEERING Also can be used on OptiMax with Mercury hydraulic cylinder and hoses
FITTING - 90 DEGREE
64-889934A05 38C38 63.95
Remote fill adapter for rear mount and tilt mount Hydraulic pumps
Hydraulic Steering for Verado 135 to 200‑4 stroke engines 22-8M6000760 22C96 38.27
Also can be used on OptiMax with Mercury hydraulic cylinder and hoses 90 degree fitting used with compression style hydraulic sytems (1/4 ‑ 18 NPT to 3/8
compression)
HYDRAULIC STEERING ARM Hydraulic Compression Steering systems
TEE FITTING
898082A03 134C24 223.73
This arm attaches the cylinder to the engine for 1.5L OptiMax engines. Remove
existing arm on 898349A01 cylinder and replace it with this arm for proper 22-8M6000771 28C91 48.21
clearances .375 Inch, Tee fitting used with compression style hydraulic sytem. (3/8
1.5L OptiMax engines compression)
Hydraulic Compression Steering systems
2021 Canada Accessories Guide 623
STEERING
BULKHEAD FITTING - COMPRESSION STYLE FITTING - TEE
CONTROLS AND RIGGING
22-8M6001381 71C26 118.79 22-8M6001390 54C65 91.08
Bulkhead fitting for Compression style Hydraulic Steering Systems Used with Compression style hydraulic systems.
.375 x 2.50 inch Tee ‑ 3/8 in. Compression X 3/8 in. male
Compression Style Hydraulic Systems Hydraulic Compression style systems ‑ Basic and Heavy Duty
FITTING-TEE BLEEDER FITTING - 90 DEGREE
22-8M0041173 28C13 46.86 22-8M6001392 50C63 84.39
3/8 Comp x 6 ORFS Used with Compression style hydraulic systems.
Tee fitting used on the compression style cylinders (1500 PSI) 90 degree‑ 3/8 in. Compression X 3/8 in.male
8M0050097 and 8M0054993 cylinders Hydraulic Compression style systems ‑ Basic and Heavy Duty
FITTING BULKHEAD 3 INCH
HYDRAULIC STEERING - COMMON TO POWER
STEERING SYSTEMS
These parts are used to install Hydraulic Steering with the Power
Steering components. Use hoses 8M0046914 thru 8M0046932 are the
hoses that go with these cylinders and helms. All fittings are Power
steering fittings found in the Power Steering section.
CYLINDER - HYDRAULIC OR POWER STEERING
22-8M0055326 9C41 15.68
Bulkhead fitting used with compression style steering hoses (.375 inch
compression X 3 inch LG)
Hydraulic Compression Steering Systems
FITTING KIT BULKHEAD
898349A11 631C09 1051.80
Cylinder designed to meet all Power Steering strength and performance
requirements. This cylinder is the most robust design in the market. Includes all
hardware to mount this cylinder including the strongest bolts to attach to the
engine.
Verado 175‑200 ‑ both Power Steering or Hydraulic V6/1.5 Opti Max Hydraulic ‑
1.5L Opti needs to order arm 898082A03 to provide clearance
75‑150 4 stroke engines.
64-8M0088973 64C62 107.69
Improved bulkhead fitting kit with chrome housing for multiple hose installations.
Multiple Hose Installations for Compression style hoses.
624 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING
CYLINDER - HYDRAULIC OR P/S- COUNTER ROTATION HYDRAULIC HELM PUMP -Q/S CONTROLS AND RIGGING
898349A14 712C75 1187.90 64-891665Q04 703C22 1172.02
Port ot counter rotation cylinder designed to meet all Power Steering strength and Front Mount 2.0 cu in displacement. Approximately 4 turns lock to lock on singles
performance requirements. This cylinder is the most robust design in the market. and 8 on dual cylinders
Includes all hardware to mount this cylinder including the strongest bolts to attach Compact design
to the engine Built‑in valve for positive rudder lock
Verado 135‑200 ‑ both Power Steering or Hydraulic. Multiple Engines Integral relief valve for over pressure protection
V6/1.5 Opti Max Hydraulic ‑ 1.5L Opti needs to order arm 898082A03 to provide Hydraulic Steering for Verado 135 to 200‑4 stroke engines
clearance 75‑115 4 stroke engines Multiple OtiMax engines ‑ P/S 150 4 Stroke Also can be used on OptiMax with Mercury hydraulic cylinder and hoses
engines. 64-891665Q05 704C02 1173.36
CYLINDER - BIG TILLER Front Mount 2.4 cu in displacement. Approximately 3 turns lock to lock on singles
and 6.5 on dual cylinders
Compact design
Built‑in valve for positive rudder lock
Integral relief valve for over pressure protection
Hydraulic Steering for Verado 135 to 200‑4 stroke engines
Also can be used on OptiMax with Mercury hydraulic cylinder and hoses
HYDRAULIC HELM PUMP -Q/S-TILT
898349A15 712C75 1187.90
Cylinder designed to meet all Power Steering strength and performance
requirements. This cylinder is the most robust design in the market. Includes all
hardware to mount this cylinder including the strongest bolts to attach to the
engine.
Big Tiller Cylinder ‑ 75‑115 4 Stroke, 75‑115 1.5L Opti, 135‑250 2.5L/3.0L Opti
and 135‑200 4 Cylinder Verado
HYDRAULIC HELM PUMP -Q/S 64-891666Q05 739A42 1056.32
Front Mount 1.5 cu in displacement. Approximately 5 turns lock to lock for singles
and 10 on dual cylinders
Compact design
Tilt Range of 48 Deg and 5 locking positions
Built‑in valve for positive rudder lock
Integral relief valve for over pressure protection
Hydraulic Steering for Verado 135 to 175‑4 stroke engines
Also can be used on OptiMax with Mercury hydraulic cylinder and hoses. Also can
be used on OptiMax with Mercury hydraulic cylinder and hoses Also can be used
on 75‑115 4 stroke and 1.5L opti 75‑115 HP
HYDRAULIC HELM PUMP -Q/S-TILT
64-891665Q01 645C50 1075.83
Front Mount 1.5 cu in displacement. Approximately 5 turns lock to lock on singles
and 10 on dual cylinders
Compact design
Built‑in valve for positive rudder lock
Integral relief valve for over pressure protection
Hydraulic Steering for Verado 135 to 175‑4 stroke engines
Also can be used on OptiMax with Mercury hydraulic cylinder and hoses. Also can
be used on OptiMax with Mercury hydraulic cylinder and hoses Also can be used
on 75‑115 4 stroke and 1.5L opti 75‑115 HP
64-891666Q03 736C48 1227.46
Front Mount 2.0 cu in displacement. Approximately 4 turns lock to lock on singles
and 8 on dual cylinders
Compact design
Tilt Range of 48 Deg and 5 locking positions
Built‑in valve for positive rudder lock
Integral relief valve for over pressure protection
Hydraulic Steering for Verado 135 to 200‑4 stroke engines
Also can be used on OptiMax with Mercury hydraulic cylinder and hoses
2021 Canada Accessories Guide 625
STEERING
64-891666Q04 744A42 1063.45 NON VENTED CAP
Front Mount 2.4 cu in displacement. Approximately 3 turns lock to lock on singles
CONTROLS AND RIGGING Tilt Range of 48 Deg and 5 locking positions
and 6.5 on dual cylinders
Compact design
Built‑in valve for positive rudder lock
Integral relief valve for over pressure protection
Hydraulic Steering for Verado 135 to 200‑4 stroke engines
Also can be used on OptiMax with Mercury hydraulic cylinder and hoses
MERCURY HYD BOLT-ON STEERING KIT- STD -W/O
HOSES
19-898432 18C90 31.51
Required for dual station installations of steering system.
REMOTE FILL KIT FOR HYDRAULIC STEERING
898349A02 1187A87 1696.96
This kit includes a standard helm (1.5Cu Inch) with all the needed components to
install the helm along with a bolt‑on cylinder with hardware . This bolt‑on kit is the
most robust hydraulic system in the market. The cylinder was tested to all Verado
standards for load and strength. The kit also includes high strength machined
stainless steel screws that are used at each attachment point. Order Verado hoses
897982K__ series separately
Used on all Verado 135‑200 L4 engines, 75‑115 4 Cylinder 4 strokes , OptiMax 64-889934A05 38C38 63.95
1/5L and V6 engines ( order arm 898082A03 when used on 1.5L Opti) (Use with Remote fill adapter for rear mount and tilt mount Hydraulic pumps
Power Steering Hoses 8M0046914 thru 8M00469932) Hydraulic Steering for Verado 135 to 200‑4 stroke engines
Also can be used on OptiMax with Mercury hydraulic cylinder and hoses
MERCURY HYD BOLT-ON STEERING KIT-TILT -W/O
HOSES HYDRAULIC HELM STEERING FLUID
898349A03 1249A66 1785.23 92-858078Q01 15C45 26.67
This kit includes a Tilt helm (1.5 Cu Inch) with all the needed components to install Meets H5606G military specifications
the helm along with a bolt‑on cylinder with hardware and remote fill kit. This For use in non‑power hydraulic steering systems such as, MerCruiser compact
bolt‑on kit is the most robust hydraulic system in the market. The cylinder was hydraulic helm steering systems and bolt‑on steering systems such as SeaStar®
tested to all Verado standards for load and strength. The kit also includes high by Teleflex®, Inc.
strength machined stainless steel screws that are used at each attachment point.
Order Verado hoses (897982K__) separately Priced individually, sold @ multiples of 6
Used on all Verado 135‑200 L4 engines, 75‑115 4 Cylinder 4 strokes , OptiMax 946 mL (32 fl oz) plastic bottle
1/5L and V6 engines ( order arm 898082A03 when used on 1.5L Opti) (Use with
Power Steering Hoses 8M0046914 thru 8M00469932) HYDRAULIC STEERING ARM
VENTED HELM CAP-VCAP
898082A03 134C24 223.73
This arm attaches the cylinder to the engine for 1.5L OptiMax engines. Remove
64-891667Q01 9C11 15.20 existing arm on 898349A01 cylinder and replace it with this arm for proper
VCAP Vented helm cap for use on Q/S helms 891665Q02 and 891666Q01 clearances
1.5L OptiMax engines
626 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING
VENTED HELM CAP-VCAP UFLEX STANDARD RACK STEERING SYSTEM
Racktech steering system. Kits will include a helm, x34 bezel and M86
steering cables. The cables have stainless steel output fitting ends, 3/4
" tapered shaft and can be mounted in multiple positions.
STANDARD RACK AND PINION STEERING SYSTEM CONTROLS AND RIGGING
64-891667Q01 9C11 15.20
VCAP Vented helm cap for use on Q/S helms 891665Q02 and 891666Q01
ADAPTER FOR POWER PURGE
64-889935A10 201C14 335.24
10 ft
Racktech 10 steering kit. Kit includes helm,90 degree bezel(X34) and a 10 ft
steering cable (M86).
64-889935A12 204C30 340.51
12 ft
Racktech 12 steering kit. Kit includes helm,90 degree bezel(X34) and a 12 ft
steering cable (M86).
64-889934A06 39C53 65.88 64-889935A13 205C90 343.16
Adapter for the Power Purge system 13 ft
Hydraulic Steering for Verado 135 to 200‑4 stroke engines Racktech 13 steering kit. Kit includes helm,90 degree bezel(X34) and a 13 ft
steering cable (M86).
Also can be used on OptiMax with Mercury hydraulic cylinder and hoses
64-889935A16 210C65 351.09
VERADO KICKER ELECTRICAL KIT 16 ft
Racktech 16 steering kit. Kit includes helm,90 degree bezel(X34) and a 16 ft
steering cable (M86).
64-889935A17 212C23 353.71
17 ft
Racktech 17 steering kit. Kit includes helm,90 degree bezel(X34) and a 17 ft
steering cable (M86).
64-889935A18 213C82 356.38
18 ft
Racktech 18 steering kit. Kit includes helm,90 degree bezel(X34) and a 18 ft
steering cable (M86).
64-889935A19 215C40 358.99
8M0134611 267C53 445.87 19 ft
Battery isolated system that allows you to run your kicker engine and use the Racktech 19 steering kit. Kit includes helm,90 degree bezel(X34) and a 19 ft
Power Steering system without you primary engine running. This system allows steering cable (M86).
you to connect to a deep cell battery (not your starter battery) and the system will 64-889935A20 217C00 361.66
provide normal power steering from the wheel. The system will alert you when your 20 ft
auxiliary battery is below 9.5 volts. This signal means that you must start your
primary engine to change the battery system. This kit will save the starting battery Racktech 20 steering kit. Kit includes helm,90 degree bezel (X34) and a 20 ft
for primary starting use only. steering cable (M86).
Verado Power Steering systems with a kicker engine 135‑200 Verado
2021 Canada Accessories Guide 627
STEERING
UFLEX STANDARD RACK STEERING SYSTEM / UFLEX ZEROTORQUE FEEDBACK RACK
CONTROLS AND RIGGING Racktech steering system. Kits include a helm, X52 tilt mechanism and Accutech Zero Torque Feedback steering system. Kits include a helm,
STEERING SYSTEM
TILT
X34 bezel and M86 steering cable. Cables have atainless steel output
M86 steering cables. Cables have stainless steel output fitting ends,
fitting ends, 3/4 " tapered shaft and can be mounted in multipe
3/4 " tapered shaft and can be mounted in multiple positions.
positions.
STANDARD RACK STEERING SYSTEM-TILT
Ref Service Bulletin 2007‑13 for Ride Guide replacement Information
ZERO TORQUE FEEDBACK RACK STEERING SYSTEM
64-889936A08 316C78 527.95
8 ft
Rotech Tilt 08 kit. The kit includes helm, X52 tilt mechanism, and 8 ft steering
cable(M86) 64-889937Q08 253C41 422.35
64-889936A09 324C34 540.59 8 ft Replaces Ride Guide System per Service Bulletin 2007‑13
9 ft Accutech 08 kit. Kit includes helm, X34 bezel and 8 ft steering cable (M86)
Rotech Tilt 09 kit. The kit includes helm, X52 tilt mechanism, and 9 ft steering ZERO TORQUE FEEDBACK RACK STEERING SYSTEM
cable(M86)
64-889936A10 319C94 533.23
10 ft
Rotech Tilt 10 kit. The kit includes helm, X52 tilt mechanism, and 10 ft steering
cable(M86)
64-889936A11 321C52 535.88
11 ft
Rotech Tilt 11 kit. The kit includes helm, X52 tilt mechanism, and 11 ft steering
cable(M86)
64-889936A12 323C09 538.48
12 ft
Rotech Tilt 12 kit. The kit includes helm, X52 tilt mechanism, and 12 ft steering
cable(M86) 64-889937Q11 258C16 430.26
64-889936A13 324C69 541.13 11 ft Replaces Ride Guide System Ref Service Bulletin 2007‑13
13 ft Accutech 11 kit. Kit includes helm, X34 bezel and 11 ft steering cable (M86)
Rotech Tilt 13 kit. The kit includes helm, X52 tilt mechanism, and 13 ft steering ZERO TORQUE FEEDBACK RACK STEERING SYSTEM
cable(M86)
64-889936A14 326C24 543.75
14 ft
Rotech Tilt 14 kit. The kit includes helm, X52 tilt mechanism, and 14 ft steering
cable(M86)
64-889936A18 332C61 554.34
18 ft
Rotech Tilt 18 kit. The kit includes helm, X52 tilt mechanism, and 18 ft steering
cable(M86)
64-889937Q13 261C34 435.59
13 ft Replaces Ride Guide System Ref Service Bulletin 2007‑13
Accutech 13 kit. Kit includes helm, X34 bezel and 13 ft steering cable (M86)
628 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING
ZERO TORQUE FEEDBACK RACK STEERING SYSTEM 64-889937Q42 319C94 533.23
42 ft Replaces Ride Guide System Ref Service Bulletin 2007‑13
Accutech 42 kit. Kit includes helm, X34 bezel and 42 ft steering cable (M86)
64-889937Q44 335C77 559.61
44 ft Replaces Ride Guide System Ref Service Bulletin 2007‑13
Accutech 44 kit. Kit includes helm, X34 bezel and 44 ft steering cable (M86)
64-889937Q50 340C54 567.56 CONTROLS AND RIGGING
50 ft Replaces Ride Guide System Ref Service Bulletin 2007‑13
Accutech 50 kit. Kit includes helm, X34 bezel and 50 ft steering cable (M86)
UFLEX ZEROTORQUE FEEDBACK RACK SYSTEM/
64-889937Q14 262C92 438.21 TILT
14 ft
Replaces Ride Guide System Ref Service Bulletin 2007‑13 Accutech Zero Torque Feedback steering system. Kit includes a helm,
Accutech 14 kit. Kit includes helm, X34 bezel and 14 ft steering cable (M86) X52 tilt mechanism and M86 steering cable. Cables have stainless
ZERO TORQUE FEEDBACK RACK STEERING SYSTEM steel output fitting ends, 3/4 " tapered shaft and can be mounted in
multiple positions.
ZERO TORQUE FEEDBACK RACK TILT STEERING
SYSTEM
64-889937Q15 264C52 440.84
15 ft Repalces Ride Guide System Ref Service Bulletin 2007‑13
Accutech 15 kit. Kit includes helm, X34 bezel and 15 ft steering cable (M86)
64-889937Q16 266C07 443.46 64-889938A08 329C41 549.04
16 ft Replaces Ride Guide System Ref Service Bulletin 2007‑13 8 ft
Accutech 16 kit. Kit includes helm, X34 bezel and 16 ft steering cable (M86) Accutech Tilt 08 Kit. Kit includes helm, X52 tilt mechanism, and 8 ft Steering cable
64-889937Q17 267C69 446.15 (M86).
17 ft Replaces Ride Guide System Ref Service Bulletin 2007‑13 64-889938A09 351C20 585.31
Accutech 17 kit. Kit includes helm, X34 bezel and 17 ft steering cable (M86) 9 ft
64-889937Q18 269C24 448.75 Accutech Tilt 09 Kit. Kit includes helm, X52 tilt mechanism, and 9 ft Steering cable
18 ft Replaces Ride Guide System Ref Service Bulletin 2007‑13 (M86).
Accutech 18 kit. Kit includes helm, X34 bezel and 18 ft steering cable (M86) 64-889938A10 335C77 559.61
64-889937Q19 270C85 451.41 10 ft
19 ft Replaces Ride Guide System Ref Service Bulletin 2007‑13 Accutech Tilt 10 Kit. Kit includes helm, X52 tilt mechanism, and 10 ft Steering
cable (M86).
Accutech 19 kit. Kit includes helm, X34 bezel and 19 ft steering cable (M86) 64-889938A11 338C94 564.91
64-889937Q22 275C60 459.32 11 ft
22 ft Replaces Ride Guide System Ref Service Bulletin 2007‑13 Accutech Tilt 11 Kit. Kit includes helm, X52 tilt mechanism, and 11 ft Steering
Accutech 22 kit. Kit includes helm, X34 bezel and 22 ft steering cable (M86) cable (M86).
64-889937Q23 277C17 461.96 64-889938A12 342C10 570.17
23 ft Replaces Ride Guide System Ref Service Bulletin 2007‑13 12 ft
Accutech 23 kit. Kit includes helm, X34 bezel and 23 ft steering cable (M86) Accutech Tilt 12 Kit. Kit includes helm, X52 tilt mechanism, and 12 ft Steering
64-889937Q25 280C34 467.22 cable (M86).
25 ft Replaces Ride Guide System Ref Service Bulletin 2007‑13 64-889938A13 345C30 575.49
Accutech 25 kit. Kit includes helm, X34 bezel and 25 ft steering cable (M86) 13 ft
64-889937Q26 281C90 469.82 Accutech Tilt 13 Kit. Kit includes helm, X52 tilt mechanism, and 13 ft Steering
26 ft Replaces Ride Guide System Ref Service Bulletin 2007‑13 cable (M86).
Accutech 26 kit. Kit includes helm, X34 bezel and 20 ft steering cable (M86) 64-889938A14 348C47 580.76
64-889937Q27 269C75 449.57 14 ft
27 ft Replaces Ride Guide System Ref Service Bulletin 2007‑13 Accutech Tilt 14 Kit. Kit includes helm, X52 tilt mechanism, and 14 ft Steering
cable (M86).
Accutech 27 kit. Kit includes helm, X34 bezel and 27 ft steering cable (M86) 64-889938A18 361C12 601.86
64-889937Q30 293C01 488.35 18 ft
30 ft Replaces Ride Guide System Ref Service Bulletin 2007‑13 Accutech Tilt 18 Kit. Kit includes helm, X52 tilt mechanism, and 18 ft Steering
Accutech 30 kit. Kit includes helm, X34 bezel and 30 ft steering cable (M86) cable (M86).
64-889937Q32 296C20 493.66 64-889938A19 364C28 607.13
32 ft Replaces Ride Guide System Ref Service Bulletin 2007‑13 19 ft
Accutech 232kit. Kit includes helm, X34 bezel and 32 ft steering cable (M86) Accutech Tilt 19 Kit. Kit includes helm, X52 tilt mechanism, and 19 ft Steering
64-889937Q38 313C61 522.70 cable (M86).
38 ft Replaces Ride Guide System Ref Service Bulletin 2007‑13
Accutech 38 kit. Kit includes helm, X34 bezel and 38 ft steering cable (M86)
2021 Canada Accessories Guide 629
STEERING
UFLEX MECHANICAL STEERING CABLES 24 ft 64-889940A24 152C03 253.39
CONTROLS AND RIGGING systems. Also replaces Morse Command 200 and teleflex "The Rack" 25 ft 64-889940A25 153C62 256.02
M86x24
Replacement rack steering cable for Accutech and Racktech steering
cables.
M86x25
258.67
RACK REPLACEMENT STEERING CABLE
155C20
64-889940A26
26 ft
M86x26
64-889940A27
27 ft
M86x27 156C80 261.34
64-889940A28 158C39 264.00
28 ft
M86x28
64-889940A29 159C98 266.64
29 ft
M86x29
64-889940A08 126C73 211.21 64-889940A30 161C56 269.27
8 ft 30 ft
M86x08 M86x30
64-889940A09 128C28 213.80 64-889940A32 164C72 274.51
9 ft 32 ft
M86x09 M86x32
64-889940A10 140C45 234.08 64-889940A34 167C89 279.82
10 ft 34 ft
M86x10 M86x34
64-889940A11 131C45 219.09 64-889940A36 171C06 285.08
11 ft 36 ft
M86x11 M86x36
64-889940A12 133C06 221.76 64-889940A38 174C22 290.36
12 ft 38 ft
M86x12 M86x38
64-889940A13 134C63 224.37 64-889940A40 177C38 295.63
13 ft 40 ft
M86x13 M86x40
64-889940A14 136C21 227.01 64-889940A42 180C55 300.92
14 ft 42 ft
M86x14 M86x42
64-889940A15 137C79 229.65 64-889940A44 183C73 306.20
15 ft 44 ft
M86x15 M86x44
64-889940A16 139C37 232.29 64-889940A46 186C89 311.48
16 ft 46 ft
M86x16 M86x46
64-889940A17 140C96 234.96 64-889940A48 190C04 316.75
17 ft 48 ft
M86x17 M86x48
64-889940A18 142C56 237.59 64-889940A50 193C22 322.06
18 ft 50 ft
M86x18 M86x50
64-889940A19 144C99 241.64
19 ft
M86x19
64-889940A20 145C71 242.84
20 ft
M86x20
64-889940A21 147C28 245.44
21 ft
M86x21
64-889940A22 148C88 248.13
22 ft
M86x22
64-889940A23 150C45 250.75
23 ft
M86x23
630 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING
TELEFLEX NON-NFB SAFE-T QC ROTARY 10 ft 64-889930A10 190C04 316.75
STEERING SYSTEMS Rotech 10 kit. Kit includes T71 FC helm, X34 mounting bezel and 10 ft Steering
cable (M66).
Designed with standard 3/4 in.(19 mm) round taper steering shaft and 64-889930A11 191C66 319.43
stainless steel cable output ends for maximum corrosion resistance. 11 ft
Features cable with quick connect to steering helm. Three turns Rotech 11 kit. Kit includes T71 FC helm, X34 mounting bezel and 11 ft Steering CONTROLS AND RIGGING
lock‑to‑lock for standard travel. 90 degree helm mount. cable (M66).
64-889930A12 193C22 322.06
SAFE-T QUICK CONNECT STEERING SYSTEM 12 ft
Rotech 12 kit. Kit includes T71 FC helm, X34 mounting bezel and 12 ft Steering
cable (M66).
64-889930A13 195C55 325.92
13 ft
Rotech 13 kit. Kit includes T71 FC helm, X34 mounting bezel and 13 ft Steering
cable (M66).
64-889930A14 196C79 327.96
14 ft
Rotech 14 kit. Kit includes T71 FC helm, X34 mounting bezel and 14 ft Steering
cable (M66).
64-889930A15 197C97 329.95
64-826472A 8 221C73 369.56 15 ft
8 ft. (2.4m) Rotech 15 kit. Kit includes T71 FC helm, X34 mounting bezel and 15 ft Steering
cable (M66).
64-826472A 9 228C76 381.26 64-889930A16 199C59 332.62
9 ft. (2.7m) 16 ft
64-826472A10 254C01 423.35 Rotech 16 kit. Kit includes T71 FC helm, X34 mounting bezel and 16 ft Steering
10 ft. (3.0m) cable (M66).
64-826472A12 257C34 428.91 64-889930A17 201C14 335.24
12 ft. (3.7m) 17 ft
64-826472A13 244C04 406.74 Rotech 17 kit. Kit includes T71 FC helm, X34 mounting bezel and 17 ft Steering
13 ft. (4.0m) cable (M66).
64-826472A14 245C65 409.44 64-889930A18 204C76 341.29
14 ft. (4.3m) 18 ft
64-826472A15 241C66 402.78 Rotech 18 kit. Kit includes T71 FC helm, X34 mounting bezel and 18 ft Steering
cable (M66).
15 ft. (4.6m) 64-889930A19 204C30 340.51
64-826472A16 243C13 405.20 19 ft
16 ft. (4.9m) Rotech 19 kit. Kit includes T71 FC helm, X34 mounting bezel and 19 ft Steering
64-826472A19 243C93 406.55 cable (M66).
19 ft. (5.87m) 64-889930A20 205C90 343.16
20 ft
UFLEX STANDARD ROTARY STEERING SYSTEMS Rotech 20 kit. Kit includes T71 FC helm, X34 mounting bezel and 20 ft Steering
cable (M66).
Rotech steering system features planetary gear design for increased
longevity, greater effidiency and smooth operation. Kits include T71 FC UFLEX STANDARD ROTARY STEERING SYSTEMS/
helm, X34 bezel and M66 steering cables. SS output fittings, 3/4 "
tapered shaft and flexible mounting positions TILT
STANDARD ROTARY STEERING SYSTEM Rotech steering system features a planetary gear design for increased
longevity, greater efficiency and smooth operation. Includes T81 FC
helm, X52 tilt mechanism and M66 steering cables. Automotive style, 5
position tilt range.
STANDARD ROTARY STEERING SYSTEM TILT
64-889930A08 186C89 311.48
8 ft
Rotech 08 kit. Kit includes T71 FC helm, X34 mounting bezel and 8 ft Steering
cable (M66).
64-889930A09 188C47 314.12 64-889931A08 293C01 488.35
9 ft 8 ft
Rotech 09 kit. Kit includes T71 FC helm, X34 mounting bezel and 9 ft Steering
cable (M66). Rotech Tilt 08 kit. Kit includes the T81 FC helm and 8 ft steering cable (M66).
2021 Canada Accessories Guide 631
STEERING
64-889931A09 294C62 491.04 12 ft 64-889932A12 329C41 549.04
9 ft
CONTROLS AND RIGGING 10 ft 64-889931A10 296C20 493.66 13 ft 64-889932A13 337C36 562.28
Rotech II 12 kit. Kit includes T72 FC helm, X34 bezel and 12 ft steering cable
Rotech Tilt 09 kit. Kit includes the T81 FC helm and 9 ft steering cable (M66).
(M66).
Rotech Tilt 10 kit. Kit includes the T81 FC helm and 10 ft steering cable (M66).
Rotech II 13 kit. Kit includes T72 FC helm, X34 bezel and 13 ft steering cable
496.29
297C77
64-889931A11
(M66).
11 ft
575.49
64-889932A14
345C30
Rotech Tilt 11 kit. Kit includes the T81 FC helm and 11 ft steering cable (M66).
507.69
304C62
64-889931A12
Rotech II 14 kit. Kit includes T72 FC helm, X34 bezel and 14 ft steering cable
12 ft
(M66).
Rotech Tilt 12 kit. Kit includes the T81 FC helm and 12 ft steering cable (M66). 14 ft 64-889932A15 356C35 593.93
64-889931A14 302C53 504.22 15 ft
14 ft Rotech II 15 kit. Kit includes T72 FC helm, X34 bezel and 15 ft steering cable
Rotech Tilt 14 kit. Kit includes the T81 FC helm and 14 ft steering cable (M66). (M66).
64-889931A16 305C68 509.47 64-889932A16 361C12 601.86
16 ft 16 ft
Rotech Tilt 16 kit. Kit includes the T81 FC helm and 16 ft steering cable (M66). Rotech II 16 kit. Kit includes T72 FC helm, X34 bezel and 16 ft steering cable
64-889931A17 307C27 512.11 (M66).
17 ft 64-889932A17 372C21 620.35
Rotech Tilt 17 kit. Kit includes the T81 FC helm and 17 ft steering cable (M66). 17 ft
64-889931A18 308C85 514.75 Rotech II 17 kit. Kit includes T72 FC helm, X34 bezel and 17 ft steering cable
(M66).
18 ft 64-889932A19 405C06 675.11
Rotech Tilt 18 kit. Kit includes the T81 FC helm and 18 ft steering cable (M66). 19 ft
64-889931A19 310C45 517.42 Rotech II 19 kit. Kit includes T72 FC helm, X34 bezel and 19 ft steering cable
19 ft (M66).
Rotech Tilt 19 kit. Kit includes the T81 FC helm and 19 ft steering cable (M66). 64-889932A20 395C97 659.96
64-889931A20 312C01 520.02 20 ft
20 ft Rotech II 20 kit. Kit includes T72 FC helm, X34 bezel and 20 ft steering cable
Rotech Tilt 20 kit. Kit includes the T81 FC helm and 20 ft steering cable (M66). (M66).
UFLEX STANDARD ROTARY STEERING SYSTEMS/ TELEFLEX NFB ROTARY STEERING
DUAL CABLE
No Feedback Steering Control. Used on Bass boats, runabouts, center
consoles‑‑virtually all of today's outboard boats with wheels to 16"
Dual cable Rotech steering system. Features planetary gear design for diameter.
longevity, greater efficiency and smoother operation. Includes T72 FC Replaces Teleflex Safe‑T steering systems without dash modifications.
helm, X34 bezel and two M66 steering cables. SS ends, 3/4 " tapered
shaft and flexible mounting positions. NFB 4.2 ROTARY SYSTEM SINGLE CABLE
STANDARD DUAL CABLE ROTARY STEERING SYSTEM
64-851622A10 296C04 493.39
10 ft. (3.0m)
64-889932A08 293C01 488.35
8 ft 64-851622A11 308C71 514.52
Rotech II 08 kit. Kit includes T72 FC helm, X34 bezel and 8 ft steering cable 11 ft. (3.4m)
(M66). 64-851622A12 317C05 528.42
64-889932A09 305C68 509.47 12 ft. (3.7m)
9 ft 64-851622A13 332C17 553.60
Rotech II 09 kit. Kit includes T72 FC helm, X34 bezel and 9 ft steering cable 13 ft. (4.0m)
(M66). 64-851622A14 353C65 589.42
64-889932A10 313C61 522.70 14 ft. (4.3m)
10 ft 64-851622A15 342C86 571.43
Rotech II 10 kit. Kit includes T72 FC helm, X34 bezel and 10 ft steering cable 15 ft. (4.6m)
(M66).
64-889932A11 321C52 535.88 64-851622A16 370C60 617.67
11 ft 16 ft. (4.9m)
Rotech II 11 kit. Kit includes T72 FC helm, X34 bezel and 11 ft steering cable 64-851622A17 346C89 578.15
(M66). 17 ft. (5.2m)
64-851622A18 374C80 624.66
18 ft. (5.5m)
632 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING
NFB 4.2 SINGLE HELM REPLACEMENT PARTS UFLEX ZEROTORQUE FEEDBACK ROTARY
SYSTEMS / TILT
Accura Zero Tirque Feedback steering system features a clutch that
eliminates rudder torque and a planetary gear design for increased
longevity, greater efficiency and smooth operation. Kit includes the T73 CONTROLS AND RIGGING
FC helm, X52 tilt mechanism and the M66 cables.
ZERO TORQUE FEEDBACK ROTARY STEERING
SYSTEM TILT
64-851622A 1 170C66 284.42
NFB 4.2 Single Helm
UFLEX ZEROTORQUE FEEDBACK ROTARY
STEERING SYSTEM
Accura Zero Torque feedback steering systems features a clutch that
eliminates rudder torque and a planetary gear design for increased
longevity, greater efficiency and smooth operatiion. Kits include the T73
FC helm, X34 bezel and M66 steering cable. 64-889934A08 331C03 551.72
8 ft
Ref Service Bulletin 2007‑13 for Ride Guide replacement Information Accura Tilt 08 Kit includes T73 FC helm, X52 tilt mechanism and 8 ft Steering
cable (M66).
ZERO TORQUE FEEDBACK ROTARY STEERING 64-889934A09 334C18 556.96
SYSTEM 9 ft
Accura Tilt 09 Kit includes T73 FC helm, X52 tilt mechanism and 9 ft Steering
cable (M66).
64-889934A10 337C36 562.28
10 ft
Accura Tilt 10 Kit includes T73 FC helm, X52 tilt mechanism and 10 ft Steering
cable (M66).
64-889934A11 340C54 567.56
11 ft
Accura Tilt 11Kit includes T73 FC helm, X52 tilt mechanism and 11ft Steering cable
(M66).
64-889934A13 346C86 578.11
64-889933Q08 250C25 417.09 13 ft
8 ft Replaces Ride Guide System Ref Service Bulletin 2007‑13 Accura Tilt 13 kit Includes T73 FC helm, X52 tilt mechanism and 13 ft steering
Accura 8 kit. Kit includes helm, X34 bezel and 8 ft Steering cable (M66). cable (M66).
64-889933Q10 253C41 422.35 64-889934A14 350C02 583.38
10 ft Replacement for Ride Guide System Ref to service Bulletin 2007‑13 14 ft
64-889933Q11 255C00 425.00 Accura Tilt 14kit Includes T73 FC helm, X52 tilt mechanism and 14ft steering cable
(M66).
11 ft Replacement for Ride Guide System Ref to service Bulletin 2007‑13 64-889934A15 384C46 640.78
64-889933Q12 256C58 427.64 15 ft
12 ft Replacement for Ride Guide System Ref to service Bulletin 2007‑13 Accura Tilt 15kit Includes T73 FC helm, X52 tilt mechanism and 15ft steering cable
64-889933Q13 258C16 430.26 (M66).
13 ft Replacement for Ride Guide System Ref to service Bulletin 2007‑13 64-889934A17 359C51 599.20
64-889933Q14 259C76 432.94 17 ft
14 ft Replacement for Ride Guide System Ref to service Bulletin 2007‑13 Accura Tilt 17kit Includes T73 FC helm, X52 tilt mechanism and 17ft steering cable
64-889933Q15 261C34 435.59 (M66).
15 ft Replacement for Ride Guide System Ref to service Bulletin 2007‑13 64-889934A19 365C86 609.77
889933Q18 266C07 443.46 19 ft
18 ft Replacement for Ride Guide System Ref to service Bulletin 2007‑13 Accura Tilt 19kit Includes T73 FC helm, X52 tilt mechanism and 19ft steering cable
(M66).
64-889933Q19 267C69 446.15 64-889934A20 369C04 615.05
19 ft Replacement for Ride Guide System Ref to service Bulletin 2007‑13
20 ft
Accura Tilt 20kit Includes T73 FC helm, X52 tilt mechanism and 20ft steering cable
(M66).
2021 Canada Accessories Guide 633
STEERING
UFLEX ROTARY STEERING CABLES ADAPTER KIT -M47 TO 290 HELM
CONTROLS AND RIGGING systems. Also replaces Morse Command 290 and Teleflex QC cables.
Replacement rotary steering cables for Rotech and Accura steering
ROTARY STEERING CABLE (M66)
64-892790A03 27C72 46.20
Adapts M47 steering cable to Morse D290 helm
UFLEX STEERING COMPONENTS-HELMS,
BEZELS,TILT MECH.
64-889939A09 134C63 224.37
9 ft X35- 20 DEGREE MOUNTING BEZEL
Replacement cable
64-889939A10 136C21 227.01
10 ft
Replacement cable
64-889939A11 137C79 229.65
11 ft
Replacement cable
64-889939A12 140C18 233.64
12 ft
Replacement cable
64-889939A13 140C96 234.96
13 ft 64-889930A03 18C62 31.05
Replacement cable Use to adjust helm angles
64-889939A14 142C53 237.56 X35‑ Used with T71 FC, T72 FC, T73 FC, G22, G22 NR helms or Mercury Power
14 ft Steering (2005 Verado)
Replacement cable X34- 90 DEGREE MOUNTING BEZEL
64-889939A15 144C13 240.23
15 ft
Replacement cable
64-889939A16 146C58 244.31
16 ft
Replacement cable
64-889939A17 147C28 245.44
17 ft
Replacement cable
64-889939A18 150C52 250.87
18 ft 64-889930A02 18C62 31.05
Replacement cable Use with helms to adjust helm angles
64-889939A19 150C45 250.75
19 ft X34‑ Used with T71 FC, T72 FC, T73 FC, G22, G22 NR helms or Mercury Power
Steering (2005 Verado)
Replacement cable
64-889939A20 152C03 253.39 STANDARD ROTARY STEERING HELM-T71 FC
20 ft
Replacement cable
ADAPTER KIT -M66 TO THREADED HELM
64-889930A01 80C39 133.97
T71 FC helm
64-892790A04 16C65 27.75
Adapts M66 cable to threaded helms
634 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING
ZERO TORQUE FEEDBACK STEERING HELM-T73 FC STANDARD RACK HELM-TILT-G96 CONTROLS AND RIGGING
64-889933A01 160C06 266.78 64-889936A01 94C96 158.25
T73 FC helm‑ G96‑ Standard Rack Helm‑ Tilt
STANDARD ROTARY STEERING HELM TILT-T81 FC ZERO TORQUE FEEDBACK RACK STEERING HELM-
G88 NR
64-889931A01 114C84 191.41
T81 FC helm‑Tilt 64-889937A01 114C55 190.93
G88 NR‑ Zero Torque Rack Helm
ZERO TORQUE FEEDBACK ROTARY STEERING HELM-
TLIT-T83 ZERO TORQUE FEEDBACK RACK HELM-TILT- G98 NR
64-889934A01 152C82 254.70 64-889938A01 134C56 224.26
T83 FC helm‑Zero Torque Feedback ‑Tilt G98 NR‑ Zero Torque Rack Helm‑Tilt
STANDARD RACK HELM- G86
UFLEX MISC COMPONENTS
TIE BARS - DUAL ENGINES
64-889935A01 84C62 141.01
G86‑ Standard Rack Helm
64-892789Q22 498C89 831.51
26 Inches long with 1 inch of total adjustability.
Outboard centerline spacing of 66.0 cm (26 in.)
For use with the 75‑115 hp EFI FourStroke (s/n 1B366823 & above), 175‑200 L4
Verado, V6 OptiMax, and 3.4 & 4.6L FourStrokes ‑ Up to 600 HP dual Install with
one Counter Rotation Engine. Also used on multiple 150 4 strokes.
64-892789Q23 506C84 844.72
28 Inches long with 1 inch of total adjustability.
Outboard centerline spacing of 71.1 cm (28 in.)
For use with the 75‑115 hp EFI FourStroke (s/n 1B366823 & above), 175‑200 L4
Verado, V6 OptiMax, and 3.4 & 4.6L FourStrokes ‑ Up to 600 HP dual Install with
one Counter Rotation Engine. Also used on multiple 150 4 strokes.
2021 Canada Accessories Guide 635
STEERING
64-892789Q25 522C69 871.13 ADAPTER KIT -M66 TO THREADED HELM
30 Inches long with 1 inch of total adjustability.
CONTROLS AND RIGGING Verado, V6 OptiMax, and 3.4 & 4.6L FourStrokes ‑ Up to 600 HP dual Install with
Outboard centerline spacing of 76.2 cm (30 in.)
For use with the 75‑115 hp EFI FourStroke (s/n 1B366823 & above), 175‑200 L4
one Counter Rotation Engine. Also used on multiple 150 4 strokes.
64-892789Q26
530C60
884.33
32 Inches long with 1 inch of total adjustability.
Outboard centerline spacing of 81.3 cm (32 in.)
For use with the 75‑115 hp EFI FourStroke (s/n 1B366823 & above), 175‑200 L4
Verado, V6 OptiMax, and 3.4 & 4.6L FourStrokes ‑ Up to 600 HP dual Install with
one Counter Rotation Engine. Also used on multiple 150 4 strokes.
64-892789Q27 538C53 897.54
34 Inches long with 1 inch of total adjustability. 64-892790A04 16C65 27.75
Outboard centerline spacing of 86.4 cm (34 in.) Adapts M66 cable to threaded helms
For use with the 75‑115 hp EFI FourStroke (s/n 1B366823 & above), 175‑200 L4
Verado, V6 OptiMax, and 3.4 & 4.6L FourStrokes ‑ Up to 600 HP dual Install with
one Counter Rotation Engine. Also used on multiple 150 4 strokes. TELEFLEX ROTARY STEERING CABLES
64-892789Q24 576C18 960.30
36 Inches long with 1 inch of total adjustability. Will work with Non‑NFB and NFB Rotary helms with quick connects.
Outboard centerline spacing of 91.5 cm (36 in.)
For use with the 75‑115 hp EFI FourStroke (s/n 1B366823 & above), 175‑200 L4 REPLACEMENT CABLES
Verado, V6 OptiMax, and 3.4 & 4.6L FourStrokes ‑ Up to 600 HP dual Install with
one Counter Rotation Engine. Also used on multiple 150 4 strokes.
SECOND STATION HOSE AND FITTING KIT-KIT 95 2S
64-851621A10 151C83 253.06
10 ft. (3.0m)
64-891667A03 85C53 142.56 64-851621A11 160C45 267.42
Kit 95 2S‑ Hose and fitting kit for second station installations 11 ft. (3.4m)
64-851621A12 159C01 265.03
COPPER TUBE FITTING KIT 12 ft. (3.7m)
64-851621A13 167C13 278.55
13 ft. (4.0m)
64-851621A14 166C35 277.25
14 ft. (4.3m)
64-851621A16 172C55 287.60
16 ft. (4.9m)
64-851621A18 178C76 297.95
18 ft. (5.5m)
64-851621A20 184C97 308.27
20 ft. (6.1m)
64-891667A04 93C17 155.28
Includes two 1.6 ft nylon tubes and all necessary fitting for a single station. TELEFLEX MECHANICAL STEERING HELMS
.375 Inch
ADAPTER KIT -M47 TO 290 HELM SAFE-T "TS" STEERING HELM
64-892790A03 27C72 46.20 64-826470A 1 178C59 297.66
Adapts M47 steering cable to Morse D290 helm
636 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING
TELEFLEX BIG-T BEZEL KIT/MISC TELEFLEX NFB SEASTAR HYDRAULIC OUTBOARD
STEERING
BIG-T BEZEL KIT
The most popular outboard hydraulic steering system offering smooth,
super‑efficient No FeedBack Steering designed for today's high
performance hulls with single or multiple outboards up to 600 HP CONTROLS AND RIGGING
combined. SeaStar Steering systems are totally self‑contained,
non‑power‑assisted units that make steering a boat a truly enjoyable
experience. Their super‑efficient hydraulic operations produces an
effect most people equate with "power steering". Although some dash
modifications are required when you upgrade from a mechanical
system, there are no pressure vessels or powers units to mount. 4.5
turns lock‑to‑lock. Packaged complete with helm, cylinder, hoses,
fittings, oil, bleeder kit and detailed instruction sheet.
64-809883A 1 162C07 270.11 SEASTAR PACKAGE WITHOUT HOSES
20/90 Degree mount
BEZEL 90 DEG
64-802902A 1 1475A16 2107.36
Front pivot mount outboard steering package. Does not include hoses. Order the
64-826465 29C28 48.80 correct length hoses separately.
Bezel 90 deg. Safe‑T QC SEASTAR HELM
BEZEL 20 DEG
64-826501A 1 776A24 1108.90
64-826464 36C06 60.10 SEA STAR TILT HELM
Bezel 20 deg. 4.2 Rotary
TELEFLEX STEERING CONNECTION KITS
862250 733C31 1222.18
Sport tilt helm
64-826449A 1 163C90 273.19 Standard equipment used on MCM sterndrives w/ CHS
Clamp Block, Outboard Stainless steel
2021 Canada Accessories Guide 637
STEERING
SEASTAR HELM MOUNT FRONT MOUNT OUTBOARD CYLINDER (STANDARD)
CONTROLS AND RIGGING
64-826484 101C37 168.94 64-826491A 1 1138A72 1626.76
This kit is designed to mount a SeaStar and SeaStar Pro helm at a 20 degree
angle to the mounting surface. Four possible mountings by varying wedge position. SEASTAR HOSE KIT
No helm modifications are required.
SEASTAR HELM BACK PLATE KIT
64-826513A14 207C50 345.83
2 hoses ‑ 14 ft(4.3m)
Also fits MCM sterndrives w/ CHS
64-826483A 1 58C95 98.26
Allows SeaStar and SeaStar Pro helms retrofit into boats where the following 64-826513A16 215C40 358.99
helms were previously installed: SyTen, pre‑1991 square SeaStar, or mechanical 2 hoses ‑ 16 ft(4.9m)
rotary steering. The kit also reduces helm protrusion by thickness of dash. Also fits MCM sterndrives w/ CHS
FRONT PIVOT MOUNT OUTBOARD CYLINDER 64-826513A18 229C66 382.75
2 hoses‑ 18 ft (5.5m)
Also fits MCM sterndrives w/ CHS
64-826513A20 237C59 395.98
2 hoses‑ 20 ft (6.1m)
Also fits MCM sterndrives w/ CHS
64-826513A22 245C48 409.15
2 hoses ‑ 22 ft ( 6.7m)
Also fits MCM sterndrives w/ CHS
64-826513A24 269C24 448.75
2 hoses ‑ 24 ft (7.3m)
Also fits MCM sterndrives w/ CHS
64-804378A 1 910A72 1301.02 HOSE CONNECTION KIT
Outboard front pivot mount cylinder.
FRONT PIVOT MOUNT OUTBOARD CYLINDER
64-826497A 1 67C20 112.00
Connects 3/8 in.(9.5mm) diameter copper tubing to SeaStar Cylinders (using 3/8
64-889457A01 871A10 1244.44 in.[9.5 mm] diameter nylon tubing.
Fits Mercury 225 EFI FourStroke outboard engine, model year 2002 and newer.
638 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING
HOSE CONNECTION KIT UFLEX STEERING CYLINDERS, HELMS AND
HOSES- MISC
HYDRAULIC HOSE - COMPRESSION STYLE FITTINGS CONTROLS AND RIGGING
64-826498A 1 136C99 228.31
Connects 3/8 in.(9.5mm) diameter copper tubing to SeaStar Cylinders (using
SeaStar Outboard Hoses)
FRONT PIVOT MOUNT CYLINDER CHART 32-8M0053483 130C87 218.12
New high strength 1500 PSI hose with compression type fittings. Fittings are made
Front Pivot Mount Outboard Cylinder of brass with a nickel plating for extra corrision resistance. (14 ft)
Used with 8M0054993/8M0056619 Basic Cylinders as well as the
See Teleflex application guide for additional Information 8M0050097/8M0054145 Heavy Duty systems, Also match to helms
8M0050098/8M0050099 and 8M0056139 thru 8M0056144
Brand Year Range Model Front Pivot 32-8M0053484 139C38 232.31
Mount O/B New high strength 1500 PSI hose with compression type fittings. Fittings are made
Cylinder of brass with a nickel plating for extra corrision resistance. (16 ft)
Honda 1996 - 2021 75-90 HP 64-804378A 1 Used with 8M0054993/8M0056619 Basic Cylinders as well as the
8M0050097/8M0054145 Heavy Duty systems, Also match to helms
Honda 1998 - 2021 30-50 HP 64-804378A 1 8M0050098/8M0050099 and 8M0056139 thru 8M0056144
Johnson/Evinrude 1997 - 2021 65-175 HP 64-804378A 1 32-8M0053485 147C92 246.53
Johnson/Evinrude 1991 - 2021 200-225 HP 64-804378A 1 New high strength 1500 PSI hose with compression type fittings. Fittings are made
of brass with a nickel plating for extra corrision resistance. (18 ft)
Johnson/Evinrude 1991 - 2021 250-300 HP 64-804378A 1
Used with 8M0054993/8M0056619 Basic Cylinders as well as the
Johnson/Evinrude 1996 - 2021 90-225 HP Ficht 64-804378A 1 8M0050097/8M0054145 Heavy Duty systems, Also match to helms
Johnson/Evinrude 1998 - 2021 65-70 HP 4-Stroke 64-804378A 1 8M0050098/8M0050099 and 8M0056139 thru 8M0056144
32-8M0053486 154C99 258.32
Mercury/Mariner 1984 - 1994 2.4/2,5 EFI 64-804378A 1
New high strength 1500 PSI hose with compression type fittings. Fittings are made
Mercury/Mariner 1989 - 2021 75-300 HP 64-804378A 1 of brass with a nickel plating for extra corrision resistance. (20 ft)
Mercury/Mariner 1998 - 2021 30-60 HP 64-804378A 1 Used with 8M0054993/8M0056619 Basic Cylinders as well as the
8M0050097/8M0054145 Heavy Duty systems, Also match to helms
Mercury 2002 - 2021 225 EFI 64-889457A01 8M0050098/8M0050099 and 8M0056139 thru 8M0056144
FourStroke
32-8M0053487 162C06 270.10
Nissan/Tohatsu 1990 - 2021 90-140 HP 64-804378A 1
New high strength 1500 PSI hose with compression type fittings. Fittings are made
Suzuki 1986 - 2021 100 HP 64-804378A 1 of brass with a nickel plating for extra corrision resistance. (22 ft)
Suzuki 1986 - 2021 115-140 HP 64-804378A 1 Used with 8M0054993/8M0056619 Basic Cylinders as well as the
8M0050097/8M0054145 Heavy Duty systems, Also match to helms
Suzuki 1986 - 2021 150-225 HP 64-804378A 1 8M0050098/8M0050099 and 8M0056139 thru 8M0056144
Suzuki 1998 - 2021 65-70 HP 4-Stroke 64-804378A 1 32-8M0053488 170C59 284.31
U S Marine/Force 1996 - 2021 90-120 HP 64-804378A 1 New high strength 1500 PSI hose with compression type fittings. Fittings are made
of brass with a nickel plating for extra corrision resistance. (24 ft)
Yamaha 1997 - 2021 100-225 HP 64-804378A 1
Used with 8M0054993/8M0056619 Basic Cylinders as well as the
Yamaha 1987 - 2021 225HP 64-804378A 1 8M0050097/8M0054145 Heavy Duty systems, Also match to helms
8M0050098/8M0050099 and 8M0056139 thru 8M0056144
Yamaha 1990 - 2021 250 HP 64-804378A 1
32-8M0053489 182C00 303.32
Yamaha 1998 - 2021 40-50-60 HP 64-804378A 1
New high strength 1500 PSI hose with compression type fittings. Fittings are made
Yamaha 1998 - 2021 70and 90 HP 64-804378A 1 of brass with a nickel plating for extra corrision resistance. (26 ft)
Yamaha 1994 - 2021 80,100 HP 4- 64-804378A 1 Used with 8M0054993/8M0056619 Basic Cylinders as well as the
Stroke 8M0050097/8M0054145 Heavy Duty systems, Also match to helms
8M0050098/8M0050099 and 8M0056139 thru 8M0056144
32-8M0053474 87C10 145.18
New high strength 1500 PSI hose with compression type fittings. Fittings are made
of brass with a nickel plating for extra corrision resistance. (2 ft)
Used with 8M0054993/8M0056619 "Basic" Cylindersas well as the
8M0050097/8M0054145 "Heavy Duty" systems, Also match to helms
8M0050098/8M0050099 and 8M0056139 thru 8M0056144
2021 Canada Accessories Guide 639
STEERING
HYDRAULIC HELM PUMP -Q/S-TILT TELEFLEX NFB SEASTAR REPLACEMENT PARTS
CONTROLS AND RIGGING
HELM VENTED FILL PLUG
64-891666Q04 744A42 1063.45
Front Mount 2.4 cu in displacement. Approximately 3 turns lock to lock on singles
and 6.5 on dual cylinders
Compact design 64-826523 40C80 68.00
Tilt Range of 48 Deg and 5 locking positions Comes with every SeaStar helm. Must be used in all single steering station
Built‑in valve for positive rudder lock systems or on the uppermost helm in multiple steering stations.
Integral relief valve for over pressure protection
Hydraulic Steering for Verado 135 to 200‑4 stroke engines HELM NON-VENTED FILL PLUG
Also can be used on OptiMax with Mercury hydraulic cylinder and hoses
VENTED HELM CAP-VCAP
64-826524 25C72 42.86
For use on lower station in multi‑station systems only. Included with kit
64‑826495A 1 (HK5501)
64-891667Q01 9C11 15.20
VCAP Vented helm cap for use on Q/S helms 891665Q02 and 891666Q01 OUTBOARD ADD-A-STATION/AUTOPILOT KIT
NON VENTED CAP
64-826495A 1 150C45 250.75
Contains fittings for adding either a steering station or an autopilot system to an
19-898432 18C90 31.51 existing SeaStar outboard steering system. Includes 25 ft.(7.3 m) of SeaStar 3/8 in.
Required for dual station installations of steering system. (9.5 mm) diameter nylon tubing and non‑vented fill plug for helm at lower most
station.
SECOND STATION HOSE AND FITTING KIT-KIT 95 2S
STERNDRIVE ADD-A-STATION/AUTOPILOT KIT
64-891667A03 85C53 142.56
Kit 95 2S‑ Hose and fitting kit for second station installations 64-826496A 1 92C67 154.44
Contains fittings for adding either a steering station or an autopilot system to an
existing SeaStar stern drive steering system. Allows use of SeaStar nylon tubing
(with SeaStar 1.7 helms only). Includes non‑vented fill plug for helm at lower most
station.
640 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517
STEERING
CYLINDER SEAL KIT TWIN ENGINE ADAPTER PLATE CONTROLS AND RIGGING
64-826532A 1 223C72 372.87 64-826511A 2 314C97 524.94
Replacement front seal for kit for SeaStar front mount cylinders (HC5340/HC5342/ Replacement adapter plate only. Used to connect twin engines utilizing single or
HC5365). Includes 2 seal glands, pin wrench and guide tool. twin front mount outboard cylinder(s) p/n 64‑826491A 1(HC5342).
Fits Mercury/Mariner V‑6 135‑200 HP (1989), 75‑250 HP (1990), 75‑275 HP (1991
BOTTLE FILLER KIT and newer) and Hi‑Perf 2.4/2.5L EFI (1995 and newer).
SEASTAR TIE BAR KIT CHART
Tie Bar Kits
For use with old style front mount outboard cylinder 64‑826491A 1
Brand Year Range Model Tie Bar Kit - Plate
Only
Johnson/Evinrude 2021 90-300 HP N.L.A.
Johnson/Evinrude 2021 300 HP N.L.A.
64-826525A 1 31C51 52.51 Johnson/Evinrude 2021 65-155 HP N.L.A.
For filling and bleeding of the hydraulic system.
Johnson/Evinrude 2021 100-155 HP N.L.A.
TELEFLEX NFB SEASTAR TIE BAR KITS Johnson/Evinrude 2021 90-225 HP 64-826512A 2
Johnson/Evinrude 2021 150-175 HP 64-826512A 2
TIE BAR KIT Johnson/Evinrude 2021 80-105 HP 64-826512A 2
Mercury/Mariner 2021 90-115 HP 64-826512A 2
Mercury/Mariner 2021 115-220 HP 64-826512A 2
Mercury/Marine 2021 135-250 HP 64-826507A 2
Mercury/Mariner 2021 100-115 HP 64-826512A 2
Mercury/Marine 2021 75-250 HP 64-826507A 2
Mercury/Marine 2021 75-250 HP 64-826507A 2
Mercury/Marine 2021 2.4/2,5 EFI(Perf) 64-826507A 2
Suzuki 2021 150-225 HP N.L.A.
Suzuki 2021 100HP N.L.A.
64-826507A 2 557C23 928.73
Includes the adapter plates, tie bar and hardware required to connect twin engines RIDEGUIDE ATTACHING KITS
utilizing single or twin front mount outboard cylinder(s) p/n 64‑826491A 1(HC5342).
Fits Mercury/Mariner V‑6 135‑200 HP (1989), 75‑250 HP (1990), 75‑275 HP (1991 Through tilt tube type. When converting tiller handle steering to remote
and newer) and Hi‑Perf 2.4/2.5L EFI (1995 and newer).
steering, the existing co‑pilot friction control should be disabled or
TIE BAR KIT removed.
STEERING LINK ROD KIT
64-826512A 2 576C31 960.52
Includes the adapter plates, tie bar and hardware required to connect twin engines
utilizing single or twin front mount outboard cylinder(s) p/n 64‑826491A 1(HC5342). 11606A 1 109C48 182.47
Fits Mercury/Mariner 90‑115 HP (1984), 115‑220 (1985‑1988), 100‑115 (1989). Starboard cable entry.
Also fits Johnson/Evinrude 80‑225 HP (1991 and newer) Fits Mercury/Mariner 6/8/9.9/15 hp. (2 cyl.) 2 cycle outboards (USA 0A197112 and
Newer, BEL 9461526 and Newer), 8 hp. 4‑Stroke outboards (232 cc) and 9.9 hp.
4‑Stroke outboards (0H000058‑0H016909).
2021 Canada Accessories Guide 641
The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
Discover the best professional documents and content resources in AnyFlip Document Base.
Search
Canada Accessories Guide (2021) - 8M0174470
- 1 - 50
- 51 - 100
- 101 - 150
- 151 - 200
- 201 - 250
- 251 - 300
- 301 - 350
- 351 - 400
- 401 - 450
- 451 - 500
- 501 - 550
- 551 - 600
- 601 - 650
- 651 - 700
- 701 - 750
- 751 - 800
- 801 - 850
- 851 - 900
- 901 - 950
- 951 - 1000
- 1001 - 1040
Pages: