Canada Accessories Guide (2021) - 8M0174470

QUICK REFERENCE GUIDE-MERCRUISER


Description Part Number Page
30 ft. 84-892451T30 542
40 ft. 84-892451T40

Adaptor Harness Non DTS 10 pin engine to 14 pin helm 84-8M0153356 546
Non DTS 14 pin engine to 10 pin helm 84-866337T01 547

Y Harness - Two Station 10 pin 84- 91942A 4 574

Ignition Switch 54212A 7
Ignition Switch w/harness - Non DTS 14 Pin 2 ft. 84-896537K02 553
8 ft. 84-896537K08 553
11 ft. 84-896537K11 553
15 ft. 84-896537K15 553
20 ft. 84-896537K20 553
25 ft. 84-896537K24 553
30 ft. 84-896537K29 553
40 ft. 84-896537K40 553

Lanyard Stop Switch - Mechanical single engine - Bezel mount 87- 19674A06 562
Lanyard Stop Switch - Mechanical single engine - Flush mount 87- 19674A05 561
Lanyard Stop Switch - DTS single engine - Bezel mount 87- 19674A08 562
Lanyard Stop Switch - DTS single engine - Flush mount 87- 19674A07 562
Lanyard Stop Switch - Mechanical dual engine - Bezel or Flush mount 87-814324A 2 562
Lanyard Stop Switch - DTS dual engine - Bezel mount 87- 19674A13 562
Lanyard Stop Switch - DTS dual engine - Flush mount 87- 19674A12 562

Galvanic Isolator & Monitor NLA

Miscellaneous Accessories

Serpentine Belt Kit - engine w/o p/s pump See application chart - Engine Accessories section

Hot Water Heater Fitting Kits See application chart - Engine Accessories section

Exhaust Riser Kits - 1.7 in, 3 in, 4.7 in & 6 in. See application chart - Engine Accessories section

Thru Transom Exhaust Outlets - 3 in. 843434A 1 197
- 4 in. 843426A 1 196

Thru Transom Exhaust Flappers - 3 in. 34765A 2 128
- 4 in. 12644A 1 128

Exhaust Block-off Plate - Required when using thru transom exhaust 861776A 2 128

Exhaust Y Pipe Kit - All V-8 engines, except 496 Mag 98-8M0117124 128
- 496 Mag & 8.2L (also requires intermediate elbow kit 98-8M0117125 148

Intermediate Elbow Kit (496 & 8.2L non-EC) - 496 (0" to 2" riser) 44267A03 138
- 496 (2" to 8" riser)
44267A02
138

QUICK REFERENCE GUIDE Intermediate Elbow Kit (496 EC) - use with 2" riser 44267A05 145





145
44267A06
- use with 4" riser

44267A07
- use with 6" riser
145
44267A08
146

- use with 8" riser




147
879288A13
Intermediate Elbow Kit (8.2 EC) w/ 3 catalyst exh manifolds
- use with 2" riser
342 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

QUICK REFERENCE GUIDE-MERCRUISER


Description Part Number Page
- use with 4" riser 879288A14 147
- use with 6" riser 879288A15 147
- use with 8" riser NLA

Intermediate Elbow Kit (8.2 EC) w/ single catalyst exh manifolds - use with 2" riser 8M0095832 146
- use with 4" riser 8M0095833 146
- use with 6" riser 8M0095834 146

Exhaust "S" Pipe - MCM 18563A 1 130
-Tow Sports 807611T 130

Exhaust Reducer Kit - reduces from 4 in. exhaust to 3 in. exhaust 44349A 1 130

Silent Choice Exhaust Valve - all V-8 engines, except 496 Mag NLA

Silent Choice Exhaust Pneumatic Air Pump 16645A 4

Closed Cooling Kits See application chart - Engine Accessories section

Jackshaft Extension Kits MCM V-6 & V8 (except 4.5L & 6.2L Mercury) 98634A20 165
MCM 4.5L & 6.2L (Mercury) 98-8M0124634 165

Remote Oil Filter Kits MCM 3.0L Carb N/A
MCM 4.3L Carb 864990A 2 168
MCM 5.0L & 5.7L Carb 864990A 1 169

Crankcase Oil Pump - Q/S 802889Q 1 290
Crankcase Oil Pump - MPP 802889A 1 290

In-line Fuel Filter Kit (boost pump) 35-864572A 1 172

Water Separating Fuel Filter Kit - Q/S 35-802893Q 4 173
Water Separating Fuel Filter Kit - MPP 35-802893A 4 268

Gear Lube Reservoir Kit Quart bottle for added capacity 865585A02 121

Gear Lube Reservoir Relocation Kit 806054A 1 121

Tilt Up Limit Spacer Kit 15768A 3 121

Trailering Clips - Q/S 817019Q 2 121
Trailering Clips - MPP 817019T 2 121

Seawater Strainer (fitting sold separately below) 35-860603 178

Seawater Stainer Fitting 1-1/2 " O.D. barb 22-816339 178

Seawater Hose Drain Kit 861505A 1 162

Flushing Attachment - allows running engine - Q/S 44357Q 2 164
Flushing Attachment - aloows running engine - MPP 44357T 2 164

Dual Water Pickup Flush Seal Kit - Q/S 881150Q 1 165 QUICK REFERENCE GUIDE
Dual Water Pickup Flush Seal Kit - MPP 881150K 1 164

Engine Flush Kit MCM V-6 & V-8 (305, 350, 377, 454, 502) non EC engines w/ Bravo drive 898235A01 163


2021 Canada Accessories Guide 343

QUICK REFERENCE GUIDE-MERCRUISER


Description Part Number Page
MCM 4.3L MPI EC engine w/ Bravo drive 98-8M0123083 163
MCM 4.5L & 6.2L (Mercury) engines w/ Bravo drive 98-8M0123083 163
MCM V-8 (305, 350, 377) EC engines w/ Bravo drive 879288A40 163
MCM/MIE 8.1L & 8.2L non-EC engines 898235A02 163
MCM/MIE 8.1L & 8.2L EC 8M0057577 163

Steering

Power Steering Pump and Cooler Kit 3.0L 861481A 2 646
Power Steering Cylinder 8M0063382 646

Dual Engine Tie Bar - stbd cable entry 16 in. (40 cm) to 30 in. (76 mm) NLA
30 in. (76 cm) to 46 in. (117 cm) 92020A 2 647
46 in. (117 cm) to 62 in. (157 cm) 92020A 3 647

Dual Engine Tie Bar - port cable entry 29 in. (74 cm) to 37-1/2 in. (95 cm) 96708A 4 647













































QUICK REFERENCE GUIDE












344 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

TABLE OF CONTENTS - CONTROLS AND RIGGING

TABLE OF CONTENTS
SmartCraft Instruments. . . . . . . . . . . . 350 SC 100 System Link (52mm) Plastic Lens Gray
Face/Black Bezel Gauges. . . . . . . . 387
Analog Gauge Interface Kits. . . . . . . . . . 398 SC 100 System Link (52mm) Plastic Lens White
MercMonitor with Active Trim Support and N2K Face/Chrome Bezel Gauges. . . . . . . 390
Gateway. . . . . . . . . . . . . . . . . . 385 SC 100 System Link (52mm) Plastic Lens White
Mercury Gateway. . . . . . . . . . . . . . . . 387 Face/White Bezel Gauges. . . . . . . . 391
Mobile Device Support. . . . . . . . . . . . . 365 SC 100 System Link (85mm) Plastic Lens Black
ROKK Mini Mount System. . . . . . . . . . . 364 Face/Chrome Bezel Gauges. . . . . . . 395
SC1000 - SC100 Family Glass Lens Black Face SC 100 System Link (85mm) Plastic Lens Gray
Gauges. . . . . . . . . . . . . . . . . . 356 Face/Black Bezel Gauges. . . . . . . . 389
SC1000 - SC100 Family Glass Lens Gray Face SC 100 System Link (85mm) Plastic Lens White
Gauges. . . . . . . . . . . . . . . . . . 357 Face/White Bezel Gauges. . . . . . . . 392
SC1000 - SC100 Family Glass Lens White Face SC 100 System Link- 110MM -Bezel/Mounting
Gauges. . . . . . . . . . . . . . . . . . 355 Hardware. . . . . . . . . . . . . . . . . 385
SC1000 System Monitor (52mm). . . . . . . 387 SC 100 System Link- 110MM -Bezel/Mounting
SC1000 System Monitor (85mm). . . . . . . 386 Hardware. . . . . . . . . . . . . . . . . 397

SC1000 System Monitor Bezels. . . . . . . . 387 SC 100 System Link Gauge 52 MM Bezels. . 379
SC 1000 System Tach/Speed (85mm) Glass Lens SC 100 System Link Gauge 52 MM Bezels. . 396
Black Face Gauges. . . . . . . . . . . . 368 SC 100 System Link Gauge 85 MM Bezels. . 381
SC 1000 System Tach/Speed (85mm) Glass Lens SC 100 System Link Gauge 85 MM Bezels. . 396
Gray Face Gauges. . . . . . . . . . . . 370 SmartCraft Rigging and Conversion Kits. . . 398
SC 1000 System Tach/Speed (85mm) Glass Lens SmartCraft System Gauge and Monitor Retaining
White Face Gauges. . . . . . . . . . . 367 Nuts. . . . . . . . . . . . . . . . . . . . 397
SC1000 System Tach/Speed (85 mm) Plastic VesselView. . . . . . . . . . . . . . . . . . . 358
Lens Black Face/Chrome Bezel Gauges 393 VesselView403. . . . . . . . . . . . . . . . . 353
SC1000 System Tach/Speed 85 MM Bezels. 371 VesselView502. . . . . . . . . . . . . . . . . 352
SC1000 System Tach/Speed 85 MM Bezels. 395 VesselView703. . . . . . . . . . . . . . . . . 351
SC 100 Glass Lens Black 110 mm. . . . . . 383 VesselView903. . . . . . . . . . . . . . . . . 350
SC 100 Glass Lens Black 52 mm. . . . . . . 374 VesselView Family. . . . . . . . . . . . . . . 358
SC 100 Glass Lens Black 85 mm. . . . . . . 380 VesselView Link. . . . . . . . . . . . . . . . . 354
SC 100 Glass Lens Gray 110 mm. . . . . . . 384 VesselView Mobile. . . . . . . . . . . . . . . 363
SC 100 Glass Lens Gray 52 mm. . . . . . . 377
SC 100 Glass Lens Gray 85 mm. . . . . . . 380 Analog Instruments. . . . . . . . . . . . . . . 401
SC 100 Glass Lens White 110 mm. . . . . . 382 Admiral Plus Black Face Family. . . . . . . . 424
SC 100 Glass Lens White 52mm. . . . . . . 371 Admiral Plus Black with Chrome Bezel. . . . 428
SC 100 Glass Lens White 85 mm. . . . . . . 379 Admiral Plus White Face Family. . . . . . . . 431
SC 100 System Link (110mm) Plastic Lens Black
Face/Chrome Bezel Gauges. . . . . . . 395 Analog Gauge Interface - Digital Engines. . . 408
SC 100 System Link (110 mm) Plastic Lens Gray Depth Sounders. . . . . . . . . . . . . . . . . 438
Face/Black Bezel Gauges. . . . . . . . 390 Flagship Plus Black Face Family. . . . . . . . 411
SC 100 System Link (110 mm) Plastic Lens White Flagship Plus White Face Family. . . . . . . 415
Face/White Bezel Gauges. . . . . . . . 393 Flagship Plus White Face with Chrome Bezels. .
SC 100 System Link (52mm) Plastic Lens Black . . . . . . . . . . . . . . . . . . . . . . . 420
Face/Chrome Bezel Gauges. . . . . . . 394 Instrument Hole Cover Kit. . . . . . . . . . . 447

2021 Canada Accessories Guide 345

TABLE OF CONTENTS - CONTROLS AND RIGGING

Instrument Sets - Admiral Plus Black Face/ Controls-Panel. . . . . . . . . . . . . . . . . 451
Chrome. . . . . . . . . . . . . . . . . . 405 Controls-Yacht. . . . . . . . . . . . . . . . . 453
Instrument Sets - Admiral Plus Black Face DTS Track Pads. . . . . . . . . . . . . . . . 453
Family. . . . . . . . . . . . . . . . . . . 404 Foot Throttle Control. . . . . . . . . . . . . . 451
Instrument Sets - Admiral Plus White Face Triple/ Quad- Controls. . . . . . . . . . . . . 452
Family. . . . . . . . . . . . . . . . . . . 406
Instrument Sets - Flagship Plus Black Face Zero Effort Controls. . . . . . . . . . . . . . . 454
Family. . . . . . . . . . . . . . . . . . . 401
Instrument Sets - Flagship Plus White Face/ Mechanical Remote Controls. . . . . . . . 457
Chrome. . . . . . . . . . . . . . . . . . 403 Bulkhead Fittings and Bellows Kits. . . . . . 473
Instrument Sets - Flagship Plus White Face Commander Series Console Mount - Dual
Family. . . . . . . . . . . . . . . . . . . 402 Engine. . . . . . . . . . . . . . . . . . . 465
Instrument Sets - International II Family. . . . 407 Commander Series Console Mount - Single
International II Family Gauges. . . . . . . . . 435 Engine. . . . . . . . . . . . . . . . . . . 464
Mechanical Trim Position Indicator & Bezel F5H208/__ Throttle and Shift Cables. . . . . 472
Chart. . . . . . . . . . . . . . . . . . . 449 Force 1992 and Prior Cable Connectors. . . 472
Mechanical Trim Position Indicator Actuator Jet Drive Remote Controls. . . . . . . . . . . 465
Kits. . . . . . . . . . . . . . . . . . . . . 449 MCC 4500 Console Mount - Dual Engine (Gen
Mechanical Trim Position Indicators - 1 Pointer. . II). . . . . . . . . . . . . . . . . . . . . 459
. . . . . . . . . . . . . . . . . . . . . . . 448 MCC 4500 Console Mount - Single Engine (Gen
Mechanical Trim Position Indicators - 2 Pointer. . II). . . . . . . . . . . . . . . . . . . . . 458
. . . . . . . . . . . . . . . . . . . . . . . 448 Morse 33C Series Cable Adapters. . . . . . 472
Mechanical Trim Position Indicators - 3 Pointer. . MPC 4000 Panel Mount Remote Controls (Gen
. . . . . . . . . . . . . . . . . . . . . . . 448 II). . . . . . . . . . . . . . . . . . . . . 457
Mechanical Trim Position Indicators - 4 Pointer. . MSC 4000 Side Mount - Accessories. . . . . 464
. . . . . . . . . . . . . . . . . . . . . . . 448
Mechanical Trim Position Indicators - 5 Pointer. . MSC 4000 Side Mount - Elect, Non-Power . . 462
.
.
.
.
.
Trim.
.
.
.
.
.
.
.
.
.
.
.
.
. . . . . . . . . . . . . . . . . . . . . . . 449 MSC 4000 Side Mount - Electric, Power Trim 460
Monitor Panels for Diesels. . . . . . . . . . . 409 MSC 4000 Side Mount - Manual Start, W/
Oil Pressure Senders. . . . . . . . . . . . . . 442 Switch. . . . . . . . . . . . . . . . . . . 463
Power Trim Sender Chart. . . . . . . . . . . 445 MSC 4000 Side Mount - Manual Start W/ No
Power Trim Senders. . . . . . . . . . . . . . 443 Switch. . . . . . . . . . . . . . . . . . . 464
QSS Replacement Gauges. . . . . . . . . . 438 Outboard Rigging Hose Kit. . . . . . . . . . . 470
Service Monitors. . . . . . . . . . . . . . . . 447 Remote Control Attaching Kits. . . . . . . . . 469
Speedometer Pickups. . . . . . . . . . . . . 440 Remote Control Conversion Kits. . . . . . . . 467
Tachometer Selection and Settings Charts 410 Rigging Hose Chart. . . . . . . . . . . . . . 471
VDO Family Gauges. . . . . . . . . . . . . . 440 Two Station Throttle & Shift Cables Attaching
Water Pressure Pick-Up Kits. . . . . . . . . . 440 Kit. . . . . . . . . . . . . . . . . . . . . 473
Water Temperature Senders. . . . . . . . . . 441 Zero Effort Remote Controls. . . . . . . . . . 466
Digital Throttle and Shift Remote Throttle and Shift Cables. . . . . . . . . . . 474
Controls. . . . . . . . . . . . . . . . . . . . 451
64-853951A_ Series Shift Cables. . . . . . . 480
Controls-Console Dual. . . . . . . . . . . . . 452 820671A_ Series Shift Cables. . . . . . . . . 480
Controls-Console-Single. . . . . . . . . . . . 452 858342A_ Series Shift Cables. . . . . . . . . 480
858342A_ Series Shift Cables. . . . . . . . . 480
346 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

TABLE OF CONTENTS - CONTROLS AND RIGGING

GEN I/SAE Platinum Plus Throttle and Shift Vessel Panels DTS. . . . . . . . . . . . . . . 503
Cables. . . . . . . . . . . . . . . . . . . 476 VIP Modules -Interface Panels. . . . . . . . . 506
GEN II/SAE Platinum Plus Throttle and Shift
Cables. . . . . . . . . . . . . . . . . . . 477 SmartCraft Rigging. . . . . . . . . . . . . . . 514
Morse 33C Series Cable Adapters. . . . . . 479 10 Pin (Blue) Data Harnesses. . . . . . . . . 522
Platinum Plus Throttle and Shift Cable GEN I 474
Platinum Plus Throttle and Shift Cable GEN II 475 10 Pin (Yellow) Data Harnesses. . . . . . . . 522
Platinum Plus Throttle and Shift Cable SAE. 478 Active Trim. . . . . . . . . . . . . . . . . . . 514
Two Station Throttle & Shift Attaching Kit. . . 479 Active Trim. . . . . . . . . . . . . . . . . . . 515
Active Trim Kits. . . . . . . . . . . . . . . . . 515
Joystick Rigging. . . . . . . . . . . . . . . . . 482 Adapter Harnesses - 10 Pin. . . . . . . . . . 523
Adapter Harnesses - 2 Pin. . . . . . . . . . . 524
Fittings. . . . . . . . . . . . . . . . . . . . . . 492 Add-On Sensor Harnesses. . . . . . . . . . . 524
Hose Assemblies. . . . . . . . . . . . . . . . 491 Add-On Sensor Harnesses - MCM. . . . . . 535
Joystick Features. . . . . . . . . . . . . . . . 487 Add-On Sensor Rigging Kits - MCM. . . . . . 535
Joystick Piloting for V6 Mercury Outboards Block Water Pressure Sender. . . . . . . . . 526
(Optimus 360). . . . . . . . . . . . . . . 482
Joystick Piloting - Key Features. . . . . . . . 483 Fuel Senders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 526
GPS Kits.
.
530
Joystick Piloting - Standard Features. . . . . 484 Junction Boxes/Junction Box Accessories. . 518
Joystick Rigging. . . . . . . . . . . . . . . . . 487
Power Steering Hose Kits-Joystick Piloting. . 491 NMEA2000. . . . . . . . . . . . . . . . . . . 531
Skyhook. . . . . . . . . . . . . . . . . . . . . 485 NMEA2000 Components. . . . . . . . . . . . 532
Skyhook Advanced Features. . . . . . . . . . 486 Pitot Kits. . . . . . . . . . . . . . . . . . . . . 529
SC 100 Link Harnesses. . . . . . . . . . . . 521
DTS Rigging. . . . . . . . . . . . . . . . . . . . 494 SmartCraft Gauge Harnesses. . . . . . . . . 520
SmartCraft K-Planes - Harnesses. . . . . . . 536
DTS Command Module and Harness Kits. . . 495 SmartCraft Rigging Kits. . . . . . . . . . . . 533
DTS Components. . . . . . . . . . . . . . . . 498 Steering Angle Sensors. . . . . . . . . . . . 535
DTS Helm Board Kits (Helm Boards Only). . 498 Transducers In-Hull. . . . . . . . . . . . . . . 529
DTS Rigging Kits. . . . . . . . . . . . . . . . 494 Transducers Thru Hull. . . . . . . . . . . . . 527
SmartCraft and DTS Application Information 494 Transom Mount Transducer Brackets. . . . . 527

Transom Mount Transducers. . . . . . . . . . 527
Diesel Rigging. . . . . . . . . . . . . . . . . . 499
Trim Sensors . . . . . . . . . . . . . . . . . . 526
2.0L Engine Rigging Kits. . . . . . . . . . . . 499
Adapters and Harnesses. . . . . . . . . . . . 509 Electrical. . . . . . . . . . . . . . . . . . . . . . 537
CCM Service Modules. . . . . . . . . . . . . 508 10 Pin (Blue) Data Harnesses. . . . . . . . . 544
Diesel TDI Rigging. . . . . . . . . . . . . . . 500 10 Pin (Yellow) Data Harnesses. . . . . . . . 543
Helm Panel DTS - Main Station. . . . . . . . 507 14 Pin Data Harnesses. . . . . . . . . . . . . 542

Helm Panel DTS - Second Station. . . . . . . 508 Accessory Harnesses. . . . . . . . . . . . . 547
Miscellaneous Accessories. . . . . . . . . . . 513 Adapter Harnesses. . . . . . . . . . . . . . . 545
Panels DTS. . . . . . . . . . . . . . . . . . . 499 Adapter Harnesses - 14 Pin. . . . . . . . . . 545
Panels DTS. . . . . . . . . . . . . . . . . . . 504 Adapter Harnesses - 2 Pin. . . . . . . . . . . 545
Panels Non DTS. . . . . . . . . . . . . . . . 499 Alpha/Numeric Key Chart. . . . . . . . . . 559
Panels Non DTS. . . . . . . . . . . . . . . . 505
Battery Bar - Multiple Connector. . . . . . . . 583
2021 Canada Accessories Guide 347

TABLE OF CONTENTS - CONTROLS AND RIGGING

Battery Cables. . . . . . . . . . . . . . . . . 583 Shadow Resistor Packs. . . . . . . . . . . . 564
Battery Isolation for Kicker Applications. . . . 585 SmartCraft Gauge Harnesses. . . . . . . . . 537
Battery Isolators. . . . . . . . . . . . . . . . . 584 Start / Stop Switches. . . . . . . . . . . . . . 555
Cable Ties. . . . . . . . . . . . . . . . . . . . 595 Tachometer Harnesses. . . . . . . . . . . . . 573
Dual Station Senders. . . . . . . . . . . . . . 575 Tools. . . . . . . . . . . . . . . . . . . . . . . 595
Electrical Hardware. . . . . . . . . . . . . . . 590 Transom Mounted Ignition Keyswitch. . . . . 554
Force Unique Ignition Key Chart. . . . . . 561 Transom Mounted Power Tilt Panel. . . . . . 579
Force Unique Ignition Keys. . . . . . . . . . 561 Trim Limit kits. . . . . . . . . . . . . . . . . . 578
Fuses and Circuit Breakers. . . . . . . . . . 592 Trim Switches. . . . . . . . . . . . . . . . . . 575
Ignition Key Cover. . . . . . . . . . . . . . . 561 Troll Control. . . . . . . . . . . . . . . . . . . 581
Ignition Keys - 3 Position - Base Number 897716 Two Station Start/Stop Panels. . . . . . . . . 575
Key Switch. . . . . . . . . . . . . . . . 559 Two Station Y-Harnesses. . . . . . . . . . . . 574
Ignition Keys - 4 Position - Base Number 893353
Key Switch. . . . . . . . . . . . . . . . 559 Steering. . . . . . . . . . . . . . . . . . . . . . . 596
Ignition Keys - Numeric. . . . . . . . . . . . . 558
Ignition Key Switches. . . . . . . . . . . . . . 549 40-115HP Tiller Handles. . . . . . . . . . . . 598
Ignition Key Switch with Harnesses. . . . . . 552 Cable Seal Kit. . . . . . . . . . . . . . . . . . 645
644
Instrument Extension Harnesses (Diesel). . . 541 Dual Cable - Single Engine Attaching Kit. . . . . . . 644
.
.
.
.
.
Dual Engine Tie Bar Kits.
.
.
Instrument Extension Harnesses (Gas
Engines). . . . . . . . . . . . . . . . . . 540 Front Pivot Mount Cylinder Chart. . . . . . 639
Instrument Harnesses. . . . . . . . . . . . . 538 Hydraulic Steering - Basic and Heavy Duty
Junction Boxes/Junction Box Accessories. . 565 Systems. . . . . . . . . . . . . . . . . . 619
Key Switches. . . . . . . . . . . . . . . . . . 557 Hydraulic Steering - Common to Power Steering
.
.
.
.
.
.
Systems.
.
.
. 624
.
.
.
.
.
.
.
.
Lanyard Stop Switches. . . . . . . . . . . . . 561 Jet Drive 135 & 270 Deg. Steering System. . 647
Lanyard Switches. . . . . . . . . . . . . . . . 564 Jet Drive 540 Deg. Steering System. . . . . . 648
Mariner Unique Ignition Key Chart. . . . . 560 Jet Drive Steering Cable Rod End. . . . . . . 648
Mariner Unique Ignition Keys. . . . . . . . . 560 MerCruiser Dual Engine Tie Bar Kits. . . . . 647
Numeric Key Chart. . . . . . . . . . . . . . 560 MerCruiser Power Steering Kits. . . . . . . . 646
Outboard Power Trim Switch Kits. . . . . . . 580 Outboard Cable and Pulley Attaching Kits. . 645
Power Trim Adaptor Harnesses. . . . . . . . 582 Power Steering Components. . . . . . . . . . 605
Power Trim Control Panels. . . . . . . . . . . 575 Power Steering - Dual. . . . . . . . . . . . . 604
Power Trim Extension Harnesses. . . . . . . 581 Power Steering Hose Kits-Joystick Piloting. . 615
Power Trim Extension Hose/Harness Kit. . . 582 Power Steering - Quad. . . . . . . . . . . . . 605
Power Trim Power Supply Cable. . . . . . . 582 Power Steering - Single. . . . . . . . . . . . 604
Quicksilver Funnel Entry Vinyl Terminals. . . 591 Power Steering - Triple. . . . . . . . . . . . . 605
Quicksilver Heat Shrinkable Connectors and RideGuide Attaching Kits. . . . . . . . . . . . 641
Tubing. . . . . . . . . . . . . . . . . . . 592
Remote Control/Ignition Choke Extension SeaStar Tie Bar Kit Chart. . . . . . . . . . . 641
Harnesses. . . . . . . . . . . . . . . . . 574 Steering Brackets. . . . . . . . . . . . . . . . 643
Remote Control Adapter Harnesses. . . . . . 574 Steering Cable Bulkhead Fittings/Bellows Kits 648
Safety Systems. . . . . . . . . . . . . . . . . 571 Steering Link Rod Chart. . . . . . . . . . . 643
SC 100 Link Harnesses. . . . . . . . . . . . 538 Steering Wheels. . . . . . . . . . . . . . . . 596
Security Systems. . . . . . . . . . . . . . . . 567 Teleflex Big-T Bezel Kit/Misc. . . . . . . . . . 637
348 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

TABLE OF CONTENTS - CONTROLS AND RIGGING

Teleflex Mechanical Steering Helms. . . . . . 636 Sport K-Planes. . . . . . . . . . . . . . . . . 651
Teleflex NFB Rotary Steering. . . . . . . . . 632
Teleflex NFB SeaStar Hydraulic Outboard Installation Specifications and Tools. . . 654
Steering. . . . . . . . . . . . . . . . . . 637 DTS - ERC Console Mount Controls - Dual
Teleflex NFB SeaStar Replacement Parts. . . 640 Engine. . . . . . . . . . . . . . . . . . . 668
Teleflex NFB SeaStar Tie Bar Kits. . . . . . . 641 DTS - ERC Console Mount Controls - Single
Teleflex Non-NFB Safe-T QC Rotary Steering Engine. . . . . . . . . . . . . . . . . . . 666
Systems. . . . . . . . . . . . . . . . . . 631 DTS - ERC Dual Console Mount Cutout
Teleflex Rotary Steering Cables. . . . . . . . 636 Template. . . . . . . . . . . . . . . . . . 665
Tie Bar Kits. . . . . . . . . . . . . . . . . . . 616 DTS - ERC Panel Mount Controls. . . . . . . 664
Tiller Handle Steering-40-300HP Tiller. . . . 602 DTS - ERC Panel Mount Cutout Template. . 663
Uflex Mechanical Steering Cables. . . . . . . 630 DTS - ERC Slim Binnacle - Single Engine. . 667
Uflex Misc Components. . . . . . . . . . . . 635 Installation Aids. . . . . . . . . . . . . . . . . 654
Uflex Rotary Steering Cables. . . . . . . . . 634 Measuring Console Control Throttle/Shift
Uflex Standard Rack Steering System. . . . 627 Cables. . . . . . . . . . . . . . . . . . . 670
Uflex Standard Rack Steering System / Tilt. . 628 Measuring for Exhaust Risers. . . . . . . . . 670
Uflex Standard Rotary Steering Systems. . . 631 Measuring MerCruiser Throttle/Shift Cables. 669
Uflex Standard Rotary Steering Systems/ Dual Measuring Outboard Throttle/Shift Cables. . 669
Cable. . . . . . . . . . . . . . . . . . . 632 MPC 4000/4000 GEN II-Panel Mount Cutout
Uflex Standard Rotary Steering Systems/Tilt 631 Template. . . . . . . . . . . . . . . . . . 662
Uflex Steering Components-Helms, Bezels,Tilt MPC 4000 GEN II Panel Mount-Lock Bar
Mech.. . . . . . . . . . . . . . . . . . . 634 Design. . . . . . . . . . . . . . . . . . . 660
Uflex Steering Cylinders, Helms and Hoses- MPC 4000 GEN II Panel Mount-Lock Bar Finger
Misc. . . . . . . . . . . . . . . . . . . . 639 Release Design. . . . . . . . . . . . . . 661
Uflex ZeroTorque Feedback Rack Steering MPC 4000 Panel Mount Controls (Trim/Non-
System. . . . . . . . . . . . . . . . . . 628 Trim). . . . . . . . . . . . . . . . . . . . 659
Uflex ZeroTorque Feedback Rack System/Tilt 629 MSC 4500 Side Mount Control Schematic. . 658
Uflex ZeroTorque Feedback Rotary Steering
System. . . . . . . . . . . . . . . . . . 633
Uflex ZeroTorque Feedback Rotary Systems /
Tilt. . . . . . . . . . . . . . . . . . . . . 633


K Planes (Trim Tabs). . . . . . . . . . . . . . 650

Actuator Kits. . . . . . . . . . . . . . . . . . 652
Competition K-Planes. . . . . . . . . . . . . 652
Hoses for K-Planes. . . . . . . . . . . . . . . 653
K-Planes Hose Kits. . . . . . . . . . . . . . . 653
K-Planes Sport Color Option. . . . . . . . . . 652
Mechanical Trim Position Indicator Chart. 651
Mechanical Trim Position Indicators 1 Pointer 650
Mechanical Trim Position Indicators 2 Pointer 650
Mechanical Trim Position Indicators 3 Pointer 650
Mechanical Trim Position Indicators 4 Pointer 650
Mechanical Trim Position Indicators 5 Pointer 650
2021 Canada Accessories Guide 349

SMARTCRAFT INSTRUMENTS

SMARTCRAFT INSTRUMENTS

CONTROLS AND RIGGING VESSELVIEW903

















































































350 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

SMARTCRAFT INSTRUMENTS


VESSELVIEW703 CONTROLS AND RIGGING



















































































2021 Canada Accessories Guide 351

SMARTCRAFT INSTRUMENTS


VESSELVIEW502
CONTROLS AND RIGGING

















































































352 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

SMARTCRAFT INSTRUMENTS


VESSELVIEW403 CONTROLS AND RIGGING



















































































2021 Canada Accessories Guide 353

SMARTCRAFT INSTRUMENTS


VESSELVIEW LINK
CONTROLS AND RIGGING

















































































354 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

SMARTCRAFT INSTRUMENTS


SC1000 - SC100 FAMILY GLASS LENS WHITE FACE GAUGES CONTROLS AND RIGGING



















































































2021 Canada Accessories Guide 355

SMARTCRAFT INSTRUMENTS


SC1000 - SC100 FAMILY GLASS LENS BLACK FACE GAUGES
CONTROLS AND RIGGING

















































































356 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

SMARTCRAFT INSTRUMENTS


SC1000 - SC100 FAMILY GLASS LENS GRAY FACE GAUGES CONTROLS AND RIGGING



















































































2021 Canada Accessories Guide 357

SMARTCRAFT INSTRUMENTS


VESSELVIEW FAMILY
CONTROLS AND RIGGING








































VESSELVIEW VESSELVIEW 903 MULTI ENGINE KIT

VesselView continues to evolve as the next generation full color
displays with an enhanced full sunlight viewable vessel information
center encompassing data from the vessel, navigation and engines.
There are numerous NMEA2K input options in addition to the fully
integrated Mercury Marine SmartCraft digital information and control
features. Regardless of the application, we have a display solution
available: VesselView4, VesselView502, VesselView702,
VesselView703, VesselView Link or VesselView Mobile.
VESSELVIEW903 SINGLE ENGINE KIT
8M0129545 2578A40 3683.43
VesselView903 is our 16:9 HD direct sunlight viewable color touchscreen‑only
multi‑function display. Kit includes VesselView Link, VV903 display and
harnessing.
Works with all SmartCraft capable engines 40 HP and up, dual through quad
engine applications only. A NMEA2000 backbone is required, starter kit available
separately.





8M0129543 2098A37 2997.68
VesselView903 is our 16:9 HD direct sunlight viewable color touchscreen‑only
multi‑function display. Kit includes VesselView Link, VV903 display and
harnessing.
Works with all SmartCraft capable engines 40 HP and up, single engine
applications only. A NMEA2000 backbone is required, starter kit available
separately.





358 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

SMARTCRAFT INSTRUMENTS


VESSELVIEW703 SINGLE ENGINE KIT VESSELVIEW403 KIT












8M0124498 1122A94 1604.20 CONTROLS AND RIGGING
8M0124495 2054A86 2935.51 VesselView403 is a direct sunlight viewable color display for up to 2 engines. Kit
VesselView703 is our 16:9 HD direct sunlight viewable color touchscreen display. includes display and harnessing.
Kit includes the VesselView Link and harnessing. WiFi and Bluetooth are built in. Works with all SmartCraft capable engines 40 HP and above. Single through quad
Works with all SmartCraft capable engines 40 HP and up, single engine engine applications but display only supports data for up to 2 engines.
applications only. A NMEA2000 backbone is required, starter kit available
separately. VESSELVIEW903 SUN COVER - MERCURY
VESSELVIEW703 MULTI ENGINE KIT










8M0133439 105C73 176.23
8M0124496 2584A66 3692.37 Protects VesselView903 when not in in use. With Mercury logo
VesselView703 is our 16:9 HD direct sunlight viewable color touchscreen display. Works with VesselView903
Kit includes the VesselView Link and harnessing. WiFi and Bluetooth are built in. VESSELVIEW703 SUN COVER - MERCURY
Works with all SmartCraft capable engines 40 HP and up, dual through quad
engine applications. A NMEA2000 backbone is required, starter kit available
separately.
VESSELVIEW502 SINGLE ENGINE KIT








8M6005011 116C63 194.38
Protects VesselView703 when unit is not being used. With Mercury Logo
Works with VesselView703
8M0110643 1109A19 1584.55 VESSELVIEW703 SUN COVER - CUMMINS
VesselView502 is our 16:9 HD direct sunlight viewable color touchscreen‑only
display. Kit includes the new VesselView Link, harnessing and GoFree WiFi
module.
Works with all SmartCraft capable engines 40 HP and up, single engine
applications only. A NMEA2000 backbone is required, starter kit available
separately.
VESSELVIEW502 MULTI ENGINE KIT
8M0110646 1759A74 2513.91
VesselView502 is our 16:9 HD direct sunlight viewable color touchscreen‑only
display. Kit includes the new VesselView Link, harnessing and GoFree WiFi
module.
Works with all SmartCraft capable engines 40 HP and up, dual through quad
engine applications. A NMEA2000 backbone is required, starter kit available 8M6005108 116C63 194.38
separately. Protects VesselView703 when unit is not being used. With Cummins Logo
Works with VesselView703









2021 Canada Accessories Guide 359

SMARTCRAFT INSTRUMENTS


VESSELVIEW502 SUN COVER - MERCURY VESSELVIEW703 BEZELS - BLACK
CONTROLS AND RIGGING










8M6003707 45C89 76.47 8M6005025 67C72 112.88
Protects VesselView502 when unit is not being used. With Mercury Logo Replacement VesselView703 bezel accent pieces ‑ black
Works with VesselView 502 Works with VesselView703
VESSELVIEW403 SUN COVER - MERCURY VESSELVIEW502 BEZEL - BLACK












8M6005019 49C19 81.98 8M6003706 30C61 51.01
Protects VesselView403 when not in use. With Mercury Logo Replacement VesselView502 bezel accent pieces ‑ black
Works with VesselView403 Works with VesselView502
VESSELVIEW403 SUN COVER - CUMMINS VESSELVIEW403 BEZEL - BLACK













8M6005109 49C19 81.98 8M6005014 20C61 34.36
Protects VesselView403 when not in use. With Cummins logo Replacement VesselView403 bezel accent piece ‑ black
Works with VesselView403 Works with VesselView403
VESSELVIEW 903 BEZEL - BLACK VESSELVIEW LINK SINGLE












8M0110639 589C62 982.70
8M0141864 91C92 153.20 Integrate your Lowrance or Simrad display with your Mercury propulsion system
Replacement VesselView903 bezel accent piece ‑ black and the power of VesselView.
Works with VesselView903 Single SmartCraft capable engine and a compatible display (VesselView502,
VesselView702, VesselView703, Simrad NSS evo2, NSS evo3, NSO evo2, GO
Series, Lowrance HDS Gen 2 Touch or HDS Gen 3)
VESSELVIEW LINK MULTI
8M0110641 1126A91 1609.87
Integrate your Lowrance or Simrad display with your Mercury propulsion system
and the power of VesselView.
Multi SmartCraft capable engines (2 to 4) and a compatible display
(VesselView502, VesselView702, VesselView703, Simrad NSS evo2, NSS evo3,
NSO evo2, GO Series, Lowrance HDS Gen 2 Touch or HDS Gen 3)
360 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

SMARTCRAFT INSTRUMENTS


VESSELVIEW LINK HARNESS VESSELVIEW903 DISPLAY ONLY CONTROLS AND RIGGING












84-8M0111670 116C63 194.38 8M0129544 1540A61 2200.88
Harness used to connect VesselView Link to the Junction Box, included in the Display only with harness, NMEA2000 T and extension, bezels, sun cover,
VesselView Link Kits mounting hardware and gasket.
Can be used with either the VesselView Link Single or Multi engine component VV903 display only for use with an exisitng VesselView Link on multi‑display
installations or as a service replacement..
VESSELVIEW LINK MOUNTING BRACKET
VESSELVIEW703 DISPLAY ONLY











8M0110649 139C21 232.01
Stainless Steel mounting bracket which allows the VesselView Link (Single or 8M0124497 1335A29 1907.54
Multi) to be installed vertically to the mounting surface. Display only with harness, NMEA2000 T and extension, bezels, sun cover,
Optional bracket to be used when there is not sufficient space to mount the mounting hardware and gasket.
VesselView Link flat to the intended mounting surface. VV703 display only for use with an exisitng VesselView Link on multi‑display
installations.
VESSELVIEW70X POWER HARNESS
VESSELVIEW502 DISPLAY ONLY











84-8M0111668 99C96 166.60
Harness provides power and SmartCraft information via a Junction Box connection 8M0110644 667C08 1111.81
Used for VesselView702 and 703 displays, comes in the full kit Display only with harness, NMEA2000 T and extension, bezels, sun cover,
mounting hardware and gasket.
VESSELVIEW502 POWER HARNESS VV502 display only for use with an exisitng VesselView Link on multi‑display
installations.
VESSELVIEW7 AND 70X VIDEO INPUT CABLE










84-8M0111669 128C77 214.63
Harness provides power and SmartCraft information via a Junction Box connection
Used for all VesselView502 displays, comes in the full kit 8M6003460 59C27 98.80
Add up to two video sources as inputs to your VesselView7 or 702 display. Can be
used for viewing numerous useful locations: the swim platform area, inside the
engine compartment/bilge area, from the ski tower looking aft or down in the galley/
cabin below
Works with VV7, VV702 or VV703 and NTSC/PAL analog video signals

2021 Canada Accessories Guide 361

SMARTCRAFT INSTRUMENTS


VESSELVIEW MOBILE VESSELVIEW MOBILE BULK (24 UNITS)
84-8M0157080 242D00 503.62
CONTROLS AND RIGGING builder and Fleet scenarios. Connect the SmartCraft digital data stream from your
Individually priced, sold @24. Does not contain point of sale packaging. Intended
for high volume installations of the VesselView Mobile Module in Dealer, boat
engine to your iOS or Android mobile device via BLE (Bluetooth Low Energy 4.0).
Get access to all the data via www.vesselviewmobile.com
Works with any SmartCraft‑capable 2003 or newer engine (from single to quad
applications), 40 HP and higher (outboards, gas or diesel sterndrives and inboards,
Joystick Piloting, Zeus pods and Racing products).



84-8M0157078 294F39 378.50
Connect the SmartCraft digital data stream from your engine to your iOS or
Android mobile device via BLE (Bluetooth Low Energy 4.0).
Works with any SmartCraft‑capable 2003 or newer engine (from single to quad
applications), 40 HP and higher (outboards, gas or diesel sterndrives and inboards,
Joystick Piloting, Zeus pods and Racing products).
Mercury Precision Branded, Clamshell Package Point of Sale Packaged.






























































362 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

SMARTCRAFT INSTRUMENTS


VESSELVIEW MOBILE CONTROLS AND RIGGING



















































































2021 Canada Accessories Guide 363

SMARTCRAFT INSTRUMENTS


ROKK MINI MOUNT SYSTEM
CONTROLS AND RIGGING

















































































364 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

SMARTCRAFT INSTRUMENTS


MOBILE DEVICE SUPPORT ROKK MINI ADJUSTABLE BODY

Three easy steps to select the ROKK mini mount system that works for
you.
1. Select your mobile device clamp:
a. phone CONTROLS AND RIGGING
b. tablet
2. Mini adjustable body works with all clamps and bases.

3. Select your base:
a. surface
b. rail 8M6005672 51C08 85.13
c. adhesive ROKK mini adjustable body is used to position a mobile device exactly where you
d. suction cup want it. Used in conjunction with a ROKK universal clamp and your choice of
ROKK mounts. Easily detaches to move to various locations.
One of three modular pieces used in the ROKK mini mount system to position your
mobile device right where you want it. A great addition to any boat, auto,
motorcycle, ATV or plane.
ROKK MINI SURFACE MOUNT

ROKK UNIVERSAL PHONE CLAMP










8M6005675 17C82 29.70
8M6005674 23C76 39.59
ROKK universal phone clamp is used to hold a phone exactly where you want it. ROKK mini surface mount is used to provide a "ROKK" solid mount for your mini
mount system which was designed to hold your mobile device exactly where you
Used in conjunction with the Mini Adjustable Body and your choice of ROKK want it. Used in conjunction with a ROKK universal clamp and the ROKK mini
mounts adjustable body.
One of three modular pieces used in the ROKK mini mount system to position your One of three modular pieces used in the ROKK mini mount system to position your
mobile device right where you want it. A great addition to any boat, auto, mobile device right where you want it. A great addition to any boat, auto,
motorcycle, ATV or plane. motorcycle, ATV or plane.
ROKK UNIVERSAL TABLET CLAMP ROKK MINI RAIL MOUNT











8M6005676 31C74 52.91
8M6005673 31C74 52.91 ROKK mini rail mount is used to provide a "ROKK" solid mount for your mini mount
ROKK universal tablet clamp is used to hold a tablet exactly where you want it. system which was designed to hold your mobile device exactly where you want it.
Used in conjunction with a ROKK universal clamp and the ROKK mini adjustable
Used in conjunction with the Mini Adjustable Body and your choice of ROKK body.
mounts
One of three modular pieces used in the ROKK mini mount system to position your One of three modular pieces used in the ROKK mini mount system to position your
mobile device right where you want it. A great addition to any boat, auto,
mobile device right where you want it. A great addition to any boat, auto,
motorcycle, ATV or plane. motorcycle, ATV or plane.















2021 Canada Accessories Guide 365

SMARTCRAFT INSTRUMENTS


ROKK SELF-ADHESIVE MOUNT ROKK EDGE WIRELESS CHARGER
CONTROLS AND RIGGING










8M6005677 22C05 36.74 8M0150735 74C86 124.77
ROKK mini self‑adhesive mount is used to provide a "ROKK" solid mount for your An adjustable clamp mount wireless charger for mobile devices that follow the Qi
mini mount system which was designed to hold your mobile device exactly where standard (such as Apple and Android phones). Qi is an open interface standard
you want it. Used in conjunction with a ROKK universal clamp and the ROKK mini that defines wireless power transfer using inductive charging.
adjustable body. This wireless charger is installed in locations where there is a desire to maintain a
One of three modular pieces used in the ROKK mini mount system to position your clamping force on the mobile device and be able to adjust the viewing angle.
mobile device right where you want it. A great addition to any boat, auto,
motorcycle, ATV or plane. ROKK ACTIVE WIRELESS CHARGER
ROKK MINI SUCTION CUP MOUNT











8M0150737 81C86 136.44
8M6005678 29C76 49.60 A clamp mount wireless charger for mobile devices that follow the Qi standard
ROKK mini suction cup mount is used to provide a "ROKK" solid mount for your (such as Apple and Android phones). Qi is an open interface standard that defines
wireless power transfer using inductive charging.
mini mount system which was designed to hold your mobile device exactly where
you want it. Used in conjunction with a ROKK universal clamp and the ROKK mini This wireless charger is installed in locations where there is a desire to maintain a
adjustable body. clamping force on the mobile device.
One of three modular pieces used in the ROKK mini mount system to position your CHARGE+ WATERPROOF DUAL USB POWER
mobile device right where you want it. A great addition to any boat, auto,
motorcycle, ATV or plane.
ROKK SURFACE WIRELESS CHARGER








8M6005670 47C42 79.03
Easy installation of waterproof USB power for up to two of your mobile devices.
12‑24V input, waterproof with 1, 2 and even no cables plugged in, up to 3x faster
8M0150736 79C86 133.10 charging than typical USB outlets, click & lock lid, total output current capacity 4.2A
A surface mount wireless charger for mobile devices that follow the Qi standard Install any place you want to have USB power close at hand.
(such as Apple and Android phones). Qi is an open interface standard that defines USB TO LIGHTNING WATERPROOF CABLE - 2 METER
wireless power transfer using inductive charging.
This wireless charger is typically installed in locations where usage occurs while
the vessel is not underway since the mobile device simply rests on the surface.










8M6005671 34C80 57.99
2 meter USB to Lightning waterproof cable
Use with any Apple device that has the Lightning connector and the Charge+
waterproof USB power supply


366 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

SMARTCRAFT INSTRUMENTS


USB TO LIGHTNING WATERPROOF CABLE - 0.6 METER SPEEDOMETER - 50 MPH
8M6005696 39C01 65.00
0.6 meter USB to Lightning waterproof cable
Use with any Apple device that has the Lightning connector and the Charge+
waterproof USB power supply
USB TO MICRO USB WATERPROOF CABLE - 2 METER
8M6005695 33C07 55.11 CONTROLS AND RIGGING
2 meter USB to micro USB waterproof cable
Use with any Android device that has the micro USB connector and the Charge+
waterproof USB power supply
USB TO MICRO USB WATERPROOF CABLE - 0.6
METER
8M6005697 39C01 65.00 79-8M0135624 409C06 681.75
0.6 meter USB to micro USB waterproof cable SC1000 50 MPH speed gauge, white face, glass lens. Fits 85mm dia. hole.
Use with any Android device that has the micro USB connector and the Charge+ Gauge has RPM and Speed based SmartTow. Features available on this gauge
waterproof USB power supply will depend on the individual engine model and its available sensors
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status support
SC 1000 SYSTEM TACH/SPEED (85MM) GLASS SPEEDOMETER - 50 MPH (NO LOGO)
LENS WHITE FACE GAUGES

Software version 9.0 for all SC1000 Tachometers and Speedometers
adds Active Trim, Active Exhaust and Oil Level Status support. (various
features are engine specific)






SPEEDOMETER - 80 MPH
79-8M0135659 409C06 681.75
SC1000 50 MPH Speed gauge, no logo, white face, glass lens. Fits 85mm dia.
hole. Gauge has RPM and Speed based SmartTow. Features available on this
gauge will depend on the individual engine model and its available sensors
BEZEL SOLD SEPERATELY. Works with all SmartCraft compatible engines.
Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status support
TACHOMETER - 7K





79-8M0135627 409C06 681.75
SC1000 80 MPH speed gauge, white face, glass lens. Fits 85mm dia. hole.
Gauge has RPM and Speed based SmartTow. Features available on this gauge
will depend on the individual engine model and its available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft capable engines.
Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status support
BULK SPEEDOMETER - 80 MPH
79-8M0135628 391C87 653.11 79-8M0135634 358C21 597.02
SC1000 80 MPH speed gauge, white face, glass lens. Fits 85mm dia. hole. Gauge SC1000 7000 RPM tach gauge, white face, glass lens. Fits 85mm dia. hole.
has RPM and Speed based SmartTow. Features available on this gauge will Gauge has RPM and Speed based SmartTow. Featuresavailable on this gauge will
depend on the individual engine model and its available sensors. depend on the individual engine model and its available sensors
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines. BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status support
support. BULK KIT contains 24 gauges BULK TACHOMETER - 7K
Priced individually, sold @ multiples of 24 79-8M0135638 357C09 595.14
SC1000 7000 RPM Tach gauge, white face, glass lens. Fits 85mm dia. hole.
Gauge has RPM and Speed based SmartTow. Features available on this gauge
will depend on the individual engine model and its available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status
support. BULK KIT contains 24 gauges
Priced individually, sold @ multiples of 24









2021 Canada Accessories Guide 367

SMARTCRAFT INSTRUMENTS


TACHOMETER - 4K DUAL ENGINE TACHOMETER - 7K / SPEEDOMETER -
80 MPH KIT
CONTROLS AND RIGGING










79-8M0135625 356C45 594.10
SC1000 4000 RPM tach gauge, white face, glass lens. Fits 85mm dia. hole. 79-8M0135626 1223A48 1747.83
Gauge has RPM and Speed based SmartTow. Features available on this gauge Two 7000 RPM tachs and one 80 MPH speed. Contains speed and tach
will depend on the individual engine model and its available sensors harnesses, junction box and air temp sensor for dual engine application. White face
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines. and glass lens. Gauges have RPM and Speed based SmartTow. Features on
Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status support these gauges will depend on the individual engine models and the available
sensors.
TACHOMETER - 5K (NO LOGO) BEZELS SOLD SEPARATELY. Work with all SmartCraft compatible engines.
Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status
support. An additional junction box may be required depending on application.
SC 1000 SYSTEM TACH/SPEED (85MM) GLASS
LENS BLACK FACE GAUGES
Software version 9.0 for all SC1000 Tachometers and Speedometers
adds Active Trim, Active Exhaust and Oil Level Status support. (various
features are engine specific)

79-8M0135658 356C45 594.10
SC1000 5000 RPM Tach gauge, no logo, white face, glass lens. Fits 85mm dia.
hole. Gauge has RPM and Speed based SmartTow. Features available on this
gauge will depend on the individual engine model and its available sensors.
BEZEL SOLD SEPERATELY. Used on all SmartCraft compatible engines. SPEEDOMETER - 80 MPH
Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status support
SINGLE ENGINE TACHOMETER - 7K / SPEEDOMETER -
80 MPH KIT









79-8M0135631 409C06 681.75
SC1000 80 MPH speed gauge, black face, glass lens. Fits 85mm dia. hole.
Gauge has RPM and Speed based SmartTow. Features available on this gauge
79-8M0135688 840A11 1200.15 will depend on the individual engine model and its available sensors
One 7000 RPM tach and one 80 MPH speed. Contains speed and tach harnesses, BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
air temp sensor and junction box for single engine application. White face and Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status support
glass lens. Gauges have RPM and Speed based SmartTow. Features available
on these gauges will depend on the individual engine model and its available SPEEDOMETER - 50 MPH
sensors.
BEZELS SOLD SEPARATELY. Works with all SmartCraft compatible engines.
Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status support









79-8M0135629 409C06 681.75
SC1000 50 MPH speed gauge, black face, glass lens. Fits 85mm dia. hole.
Gauge has RPM and Speed based SmartTow Features available on this gauge
will depend on the individual engine model and its available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status support

368 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

SMARTCRAFT INSTRUMENTS


TACHOMETER - 7K TACHOMETER - 5K (NO LOGO) CONTROLS AND RIGGING












79-8M0135641 358C21 597.02 79-8M0135657 356C45 594.10
SC1000 7000 RPM tach, black face, glass lens. Fits 85mm dia. hole. SC1000 5000 RPM tach, no logo, black face, glass lens. Fits 85mm dia. hole.
Gauge has RPM and Speed based SmartTow. Features available on this gauge Gauge has RPM and Speed based SmartTow. Features availabe on this gauge
will depend on the individual engine model and its available sensors will depend on the individual engine model and its available sensors
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines. BEZEL SOLD SEPERATELY. Works with all SmartCraft comp[atible engines.
Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status support Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status support
TACHOMETER - 4K SINGLE ENGINE TACHOMETER - 7K / SPEEDOMEMTER
- 80 MPH KIT











79-8M0135630 356C45 594.10
SC1000 4000 RPM tach gauge, black face, glass lens. Fits 85mm dia. hole. 79-8M0135633 840A11 1200.15
Gauge has RPM and Speed based SMartTow. Features available on this gauge One 7000 RPM tach and one 80 MPH speedometer. Contains speed and tach
will depend on the individual engine model and its available sensors harnesses, air temp sensor and junction box for single engine application. Black
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines. face and glass lens. Gauges have RPM and Speed based SmartTow. Features
Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status support availabe on these gauges will depend on the individual engine model and its
available sensors
TACHOMETER - 4K (NO LOGO) BEZELS SOLD SEPARATELY. Work with all SmartCraft compatible engines.
Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status support
DUAL ENGINE TACHOMETER - 7K / SPEEDOMETER 80
MPH KIT









79-8M0135656 356C45 594.10
SC1000 4000 RPM tach gauge, no logo, black face, glass lens. Fits 85mm dia.
hole. Gauge has RPM and Speed based SmartTow. Features on this gauge will
depend on the individual engine model and its available sensors
BEZEL SOLD SEPERATELY. Works with all SmartCraft compatible engines. 79-8M0135632 1223A48 1747.83
Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status support Two 7000 RPM tachs and one 80 MPH speedometer. Contains speed and tach
harnesses, air temp sensor and junction box for dual application. Black face and
glass lens. Gauges have RPM and speed based SmartTow. Features available on
these gauges will depend on the individual engine model and its available sensors.
BEZELS SOLD SEPARATELY. Works with all SmartCraft compatible engines.
Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status
support. An additional junction box may be required depending on application.














2021 Canada Accessories Guide 369

SMARTCRAFT INSTRUMENTS


SC 1000 SYSTEM TACH/SPEED (85MM) GLASS TACHOMETER - 7K
CONTROLS AND RIGGING Software version 9.0 for all SC1000 Tachometers and Speedometers
LENS GRAY FACE GAUGES

adds Active Trim, Active Exhaust and Oil Level Status support. (various
features are engine specific)





79-8M0135645 358C21 597.02
SPEEDOMETER - 80 MPH
SC1000 7000 RPM tach, gray face, glass lens. Fits 85mm dia. hole.
Gauge has RPM and Speed based SmartTow. Features available on this gauge
will depend on the individual engine model and its available sensors
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status support
BULK TACHOMETER - 7K
79-8M0135646 356C34 593.90
SC1000 7000 RPM tach, gray face, glass lens. Fits 85mm dia. hole.
Gauge has RPM and Sppeed based SmartTow. Features available on this gauge
will depend on the individual engine model and its available sensors
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
79-8M0135654 409C06 681.75 Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status
SC1000 80 MPH speed gauge, gray face, glass lens. Fits 85mm dia. hole. support. BULK KIT contains 24 gauges
Priced individually, sold @ multiples of 24
Gauge has RPM and Speed based SmartTow. Features available on this gauge
will depend on the individual engine model and its available sensors TACHOMETER - 4K
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status support
BULK SPEEDOMETER -80 MPH
79-8M0135655 397C76 662.93
SC1000 80 MPH speed gauge, gray face, glass lens. Fits 85mm dia. hole.
gauge has RPM and Speed based SmartTow. Features available on this gauge
will depend on the individual engine model and its available sensors
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status support
Priced individually, sold @ multiples of 24
SPEEDOMETER - 50 MPH 79-8M0135644 356C45 594.10
SC1000 4000 RPM tach, gray face, glass lens. Fits 85mm dia. hole.
Gauge has RPM and Speed based SmartTow. Features available on this gauge
will depend on the individual engine model and its available sensors
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status support
SINGLE ENGINE TACHOMETER - 7K / SPEEDOMETER -
80 MPK KIT



79-8M0135651 399C07 665.11
SC1000 50 MPH speed gauge, gray face, glass lens. Fits 85mm dia. hole.
Gauge has RPM and Speed based SmartTow. Features available on this gauge
will depend on the individual engine model and its available sensors
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status support

79-8M0135648 835A99 1194.27
One 7000 RPM tach and one 80 MPH speedometer. Contains speed and tach
harnesses, air temp sensor and junction box for single engine application. Gray
face and glass lens. Gauges have RPM and Speed based SmartTow. Features
available on these gauges will depend on the individual engine model and its
available sensors.
BEZELS SOLD SEPARATELY. Work with all SmartCraft compatible engines.
Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status support




370 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

SMARTCRAFT INSTRUMENTS


DUAL ENGINE TACHOMETER - 7K / SPEEDOMETER - BEZEL
80 MPH KIT CONTROLS AND RIGGING











859074 3 16C82 28.03
79-8M0135649 1223A48 1747.83 Chrome
Two 7000 RPM tachs and one 80 MPH speedometer. Contains speed and tach Fits large 3‑3/8 in.(85 mm) O.D. SC1000 System gauges and MercMonitors
harnesses, junction box and air temp sensor for dual engine application. Gray face
and glass lens. Gauges have RPM and Speed based SmartTow. Features 859074B 3 14C90 24.84
available on these gauges will depend on the individual engine model and its Chrome
available sensors Fits large 3‑3/8 in.(85 mm) O.D. SC1000 System gauges and MercMonitors
BEZELS SOLD SEPARATELY. Works with all SmartCraft compatible engines. Priced individually, sold @ multiples of 24
Software version 9.0 adds Active Trim, Active Exhaust and Oil Level Status support
SC 100 GLASS LENS WHITE 52MM
SC1000 SYSTEM TACH/SPEED 85 MM BEZELS
SC100 System Link gauges allow you to monitor vital engine and boat
functions with digital accuracy. Furnished with a fog resistant lens, these
gauges can be "daisy chain" interfaced between other SmartCraft
products using a plug‑in connection. SC100 link gauges can be
connected to a SC1000 System Tach, a MercMonitor or System
Monitor.
BEZEL





COOLANT TEMPERATURE GAUGE






859074 1 5C48 9.13
Black
Fits large 3‑3/8 in.(85 mm) O.D. SC1000 System gauges and MercMonitors
859074B 1 5C65 9.41
Black
Fits large 3‑3/8 in.(85 mm) O.D. SC1000 System gauges and MercMonitors
Priced individually, sold @ multiples of 24 79-8M0052863 81C76 136.27
Dual scale (English and Metric) temperature gauge, white face, glass lens. Fits a
BEZEL standard 2‑1/8" (52mm) dia. hole.
Application of this gauge will depend on the individual engine model and its
available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.









859074 2 8C46 14.10
White
Fits large 3‑3/8 in.(85 mm) O.D. SC1000 System gauges and MercMonitors
859074B 2 8C49 14.15
White
Fits large 3‑3/8 in.(85 mm) O.D. SC1000 System gauges and MercMonitors
Priced individually, sold @ multiples of 24




2021 Canada Accessories Guide 371

SMARTCRAFT INSTRUMENTS


VOLTAGE GAUGE (12 V) FUEL LEVEL 2 GAUGE
CONTROLS AND RIGGING










79-8M0052864 81C76 136.27 79-8M0052866 81C76 136.27
Voltage gauge (8‑16V), white face, glass lens. Fits a standard 2‑1/8" (52mm) dia. Fuel Level 2 Gauge, white face, glass lens. Fits a standard 2‑1/8" (52mm) dia.
hole. hole.
Application of this gauge will depend on the individual engine model and its
Application of this gauge will depend on the individual engine model and its available sensors.
available sensors. BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
FUEL FLOW GAUGE
VOLTAGE GAUGE (24 V)











79-8M0069416 81C79 136.32
79-8M0069412 81C79 136.32 Dual scale fuel flow gauge, white face. Fits a standard 2‑1/8 in. (52 mm) dia. hole.
Voltage gauge (16‑32V), white face, glass lens. Fits a standard 2‑1/8" (52mm) dia. Application of this gauge will depend on the individual engine model and its
hole. Application of this gauge will depend on the individual engine model and its available sensors.
available sensors. BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
BEZEL SOLD SEPERATELY. Used on all SmartCraft capable engines
WATER LEVEL GAUGE
FUEL LEVEL GAUGE












79-8M0052867 81C76 136.27
79-8M0052865 81C76 136.27 Water Level Gauge, white face, glass lens. Fits a standard 2‑1/8" (52mm) dia.
Fuel Level Gauge, white face, glass lens. Fits a standard 2‑1/8" (52mm) dia. hole. hole.
Application of this gauge will depend on the individual engine model and its Application of this gauge will depend on the individual engine model and its
available sensors. available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines. BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.




















372 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

SMARTCRAFT INSTRUMENTS


WASTE LEVEL GAUGE TRANSMISSION OIL TEMPERATURE GAUGE CONTROLS AND RIGGING












79-8M0052868 81C76 136.27 79-8M0088771 81C76 136.27
Waste Level Gauge, white face, glass lens. Fits a standard 2‑1/8" (52mm) dia. Transmission oil temperature 120‑300 degree F.
hole. White face, glass lens. Fits a standard 2.125 inch (52mm) dia. hole. Application of
this gauge will depend on the individual engine model and its available sensors.
Application of this gauge will depend on the individual engine model and its BEZEL SOLD SEPERATELY. Typically used on diesel SmartCraft capable
available sensors. engines.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
TRIM GAUGE
OIL PRESSURE GAUGE - 0-100 PSI











79-8M0052870 81C76 136.27
79-8M0052869 81C76 136.27 Trim gauge, white face, glass lens. Fits a standard 2‑1/8" (52mm) dia. hole.
Dual scale (English and Metric) 0‑100 psi oil pressure gauge, white face, glass Application of this gauge will depend on the individual engine model and its
lens. Fits a standard 2‑1/8" (52mm) dia. hole. available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
Application of this gauge will depend on the individual engine model and its
available sensors. WATER PRESSURE GAUGE
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
GEAR OIL PRESSURE GAUGE - 600 PSI










79-8M0052871 81C76 136.27
Dual scale (English and Metric) water pressure gauge, white face, glass lens. Fits
a standard 2‑1/8" (52mm) dia. hole.
79-8M0069415 81C76 136.27 Application of this gauge will depend on the individual engine model and its
Dual scale (English and Metric) 600 psi oil pressure gauge, white face, glass lens. available sensors.
Fits a standard 2‑1/8" (52mm) dia. hole. Application of this gauge will depend on BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
the individual engine model and its available sensors.
BEZEL SOLD SEPERATELY. Used on all SmartCraft capable engines RUDDER ANGLE GAUGE












79-8M0052872 81C76 136.27
Rudder Angle gauge, white face, glass lens. Fits a standard 2‑1/8" (52mm) dia.
hole.
Application of this gauge will depend on the individual engine model and its
available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
2021 Canada Accessories Guide 373

SMARTCRAFT INSTRUMENTS


OIL TEMPERATURE GAUGE VOLTAGE GAUGE (12 V)
CONTROLS AND RIGGING










79-8M0054374 81C76 136.27 79-8M0052843 81C76 136.27
Dual scale (English and Metric) oil temperature gauge, white face, glass lens. Fits Voltage gauge (8‑16V), black face, glass lens. Fits a standard 2‑1/8" (52mm) dia.
a standard 2‑1/8" (52mm) dia. hole. hole.
Application of this gauge will depend on the individual engine model and its Application of this gauge will depend on the individual engine model and its
available sensors. available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines. BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
OIL LEVEL GAUGE VOLTAGE GAUGE (24 V)













79-8M0052873 81C76 136.27 79-8M0069426 81C76 136.27
Oil Level gauge, white face, glass lens. Fits a standard 2‑1/8" (52mm) dia. hole. Voltage gauge (16‑32V), black face, glass lens. Fits a standard 2‑1/8" (52mm) dia.
hole.
Application of this gauge will depend on the individual engine model and its
available sensors. Application of this gauge will depend on the individual engine model and its
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines. available sensors.
BEZEL SOLD SEPERATELY. Used on all SmartCraft capable engines
SC 100 GLASS LENS BLACK 52 MM FUEL LEVEL GAUGE

SC100 System Link gauges allow you to monitor vital engine and boat
functions with digital accuracy. Furnished with a fog resistant lens, these
gauges can be "daisy chain" interfaced between other SmartCraft
products using a plug‑in connection. SC100 link gauges can be
connected to a SC1000 System Tach, a MercMonitor or System
Monitor.




79-8M0052844 81C76 136.27
COOLANT TEMPERATURE GAUGE Fuel Level gauge, black face, glass lens. Fits a standard 2‑1/8" (52mm) dia. hole.
Application of this gauge will depend on the individual engine model and its
available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.








79-8M0052842 81C76 136.27
Dual scale (English and Metric) coolant temperature gauge, black face, glass lens.
Fits a standard 2‑1/8" (52mm) dia. hole.
Application of this gauge will depend on the individual engine model and its
available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.

374 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

SMARTCRAFT INSTRUMENTS


FUEL LEVEL 2 GAUGE OIL PRESSURE GAUGE - 0-80 PSI CONTROLS AND RIGGING












79-8M0052845 81C76 136.27 79-8M0069427 81C76 136.27
Fuel Level 2 gauge, black face, glass lens. Fits a standard 2‑1/8" (52mm) dia. Dual scale (English and Metric) 0‑80 psi oil pressure gauge, black face, glass lens.
hole. Fits a standard 2‑1/8" (52mm) dia. hole.
Application of this gauge will depend on the individual engine model and its
available sensors. Application of this gauge will depend on the individual engine model and its
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines. available sensors.
BEZEL SOLD SEPERATELY. Used on all SmartCraft capable engines
WATER LEVEL GAUGE
OIL PRESSURE GAUGE - 0-100 PSI











79-8M0052846 81C76 136.27
Water Level gauge, black face, glass lens. Fits a standard 2‑1/8" (52mm) dia. 79-8M0052848 81C76 136.27
hole. Dual scale (English and Metric) 0‑100 psi oil pressure gauge, black face, glass
lens. Fits a standard 2‑1/8" (52mm) dia. hole.
Application of this gauge will depend on the individual engine model and its
available sensors. Application of this gauge will depend on the individual engine model and its
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines. available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
WASTE LEVEL GAUGE
OIL PRESSURE GAUGE - 0-150 PSI











79-8M0052847 81C76 136.27
Waste Level gauge, black face, glass lens. Fits a standard 2‑1/8" (52mm) dia. 79-8M0069428 81C82 136.36
hole. Dual scale (English and Metric) 0‑150 psi oil pressure gauge, black face, glass
Application of this gauge will depend on the individual engine model and its lens. Fits a standard 2‑1/8" (52mm) dia. hole.
available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines. Application of this gauge will depend on the individual engine model and its
available sensors.
BEZEL SOLD SEPERATELY. Used on all SmartCraft capable engines

















2021 Canada Accessories Guide 375

SMARTCRAFT INSTRUMENTS


GEAR OIL PRESSURE GAUGE - 600 PSI WATER PRESSURE GAUGE
CONTROLS AND RIGGING










79-8M0069429 81C76 136.27 79-8M0052850 81C76 136.27
Dual scale (English and Metric) 600 psi oil pressure gauge, black face, glass lens. Dual scale (English and Metric) water pressure gauge, black face, glass lens. Fits
Fits a standard 2‑1/8" (52mm) dia. hole. a standard 2‑1/8" (52mm) dia. hole.
Application of this gauge will depend on the individual engine model and its Application of this gauge will depend on the individual engine model and its
available sensors. available sensors.
BEZEL SOLD SEPERATELY. Used on all SmartCraft capable engines. BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
TRANSMISSION OIL TEMPERATURE GAUGE RUDDER ANGLE GAUGE













79-8M6002607 81C76 136.27 79-8M0052851 81C76 136.27
Transmission oil temperature 120‑300 degree F. Rudder Angle gauge, black face, glass lens. Fits a standard 2‑1/8" (52mm) dia.
Black face, glass lens. Fits a standard 2‑1/8" (52mm) dia. hole. hole.
Application of this gauge will depend on the individual engine model and its Application of this gauge will depend on the individual engine model and its
available sensors. available sensors.
BEZEL SOLD SEPERATELY. Typically used on diesel SmartCraft capable BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
engines.
OIL TEMPERATURE GAUGE
TRIM GAUGE











79-8M0054360 81C76 136.27
79-8M0052849 81C76 136.27 Dual scale (English and Metric) oil temperature gauge, black face, glass lens. Fits
Trim gauge, black face, glass lens. Fits a standard 2‑1/8" (52mm) dia. hole. a standard 2‑1/8" (52mm) dia. hole.
Application of this gauge will depend on the individual engine model and its
Application of this gauge will depend on the individual engine model and its available sensors.
available sensors. BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.

















376 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

SMARTCRAFT INSTRUMENTS


OIL LEVEL GAUGE FUEL LEVEL GAUGE CONTROLS AND RIGGING












79-8M0052852 81C76 136.27 79-8M0065970 81C76 136.27
Oil Level gauge, black face, glass lens. Fits a standard 2‑1/8" (52mm) dia. hole. Fuel Level Gauge, gray face, glass lens. Fits a standard 2‑1/8" (52mm) dia. hole.
Application of this gauge will depend on the individual engine model and its
Application of this gauge will depend on the individual engine model and its available sensors.
available sensors. BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
FUEL LEVEL 2 GAUGE
SC 100 GLASS LENS GRAY 52 MM

SC100 System Link gauges allow you to monitor vital engine and boat
functions with digital accuracy. Furnished with a fog resistant lens, these
gauges can be "daisy chain" interfaced between other SmartCraft
products using a plug‑in connection. SC100 link gauges can be
connected to a SC1000 System Tach, a MercMonitor or System
Monitor.



79-8M0065971 81C76 136.27
Fuel Level 2 Gauge, gray face, glass lens. Fits a standard 2‑1/8" (52mm) dia.
hole.
COOLANT TEMPERATURE GAUGE
Application of this gauge will depend on the individual engine model and its
available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
FUEL FLOW GAUGE








79-8M0065962 81C76 136.27
Dual scale (English and Metric) temperature gauge, gray face, glass lens. Fits a
standard 2‑1/8" (52mm) dia. hole.
Application of this gauge will depend on the individual engine model and its
available sensors. 79-8M0069430 81C76 136.27
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines. Dual scale fuel flow gauge, gray face. Fits a standard 2‑1/8 in. (52 mm) dia. hole.
Application of this gauge will depend on the individual engine model and its
VOLTAGE GAUGE available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
WATER LEVEL GAUGE









79-8M0065963 81C76 136.27
Voltage gauge, gray face, glass lens. Fits a standard 2‑1/8" (52mm) dia. hole.
Application of this gauge will depend on the individual engine model and its
available sensors. 79-8M0065972 81C76 136.27
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines. Water Level Gauge, gray face, glass lens. Fits a standard 2‑1/8" (52mm) dia. hole.
Application of this gauge will depend on the individual engine model and its
available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
2021 Canada Accessories Guide 377

SMARTCRAFT INSTRUMENTS


WASTE LEVEL GAUGE WATER PRESSURE GAUGE
CONTROLS AND RIGGING










79-8M0065973 81C76 136.27 79-8M0065976 81C76 136.27
Waste Level Gauge, gray face, glass lens. Fits a standard 2‑1/8" (52mm) dia. Dual scale (English and Metric) water pressure gauge, gray face, glass lens. Fits a
hole. standard 2‑1/8" (52mm) dia. hole.
Application of this gauge will depend on the individual engine model and its Application of this gauge will depend on the individual engine model and its
available sensors. available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines. BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
OIL PRESSURE GAUGE RUDDER ANGLE GAUGE













79-8M0065974 81C76 136.27 79-8M0065977 81C76 136.27
Dual scale (English and Metric) oil pressure gauge, gray face, glass lens. Fits a Rudder Angle gauge, gray face, glass lens. Fits a standard 2‑1/8" (52mm) dia.
standard 2‑1/8" (52mm) dia. hole. hole.
Application of this gauge will depend on the individual engine model and its
available sensors. Application of this gauge will depend on the individual engine model and its
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines. available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
TRIM GAUGE
OIL LEVEL GAUGE











79-8M0065975 81C76 136.27
Trim gauge, gray face, glass lens. Fits a standard 2‑1/8" (52mm) dia. hole. 79-8M0065979 81C76 136.27
Application of this gauge will depend on the individual engine model and its Oil Level gauge, gray face, glass lens. Fits a standard 2‑1/8" (52mm) dia. hole.
available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines. Application of this gauge will depend on the individual engine model and its
available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.


















378 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

SMARTCRAFT INSTRUMENTS


OIL TEMPERATURE GAUGE BEZEL CONTROLS AND RIGGING












79-8M0065978 81C76 136.27 8M6002359 19C07 31.76
Dual scale (English and Metric) oil temperature gauge, gray face, glass lens. Fits a Chrome ‑ 52 mm
standard 2‑1/8" (52mm) dia. hole. Fits small 2‑1/8 in.(52 mm) O.D. SC100 System Link gauges
Application of this gauge will depend on the individual engine model and its Priced individually, sold @ multiples of 2
available sensors. 8M0032454 18C27 30.46
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines. Chrome
Fits small 2.125 in.(52 mm) O.D. SC100 System Link gauges
SC 100 SYSTEM LINK GAUGE 52 MM BEZELS Priced individually, sold @ multiples of 24

SC 100 GLASS LENS WHITE 85 MM
SC100 System Link gauges allow you to monitor vital engine and boat
functions with digital accuracy. Furnished with a fog resistant lens, these
gauges can be "daisy chain" interfaced between other SmartCraft
BEZEL products using a plug‑in connection. SC100 link gauges can be
connected to a SC1000 System Tach, a MercMonitor or System
Monitor.






SPEEDOMETER


879871 1 4C28 7.14
Black ‑ 52 mm
Fits small 2‑1/8 in.(52 mm) O.D. SC100 System Link gauges
Priced individually, sold @ multiples of 2
879871B 1 4C01 6.68
Black
Fits small 2‑1/8 in.(52 mm) O.D. SC100 System Link gauges
Priced individually, sold @ multiples of 24
BEZEL 79-8M0052874 110C99 184.99
80 MPH/KPH speed gauge, white face, glass lens. Fits 85mm dia. hole.
Application of this gauge will depend on the individual engine model and its
available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
SPEEDOMETER







879871 2 5C72 9.52
White ‑ 52 mm
Fits small 2‑1/8 in.(52 mm) O.D. SC100 System Link gauges
Priced individually, sold @ multiples of 2

79-8M0069417 108C31 180.52
120 MPH/KPH speed gauge, white face, glass lens. Fits 85mm dia. hole.
Application of this gauge will depend on the individual engine model and its
available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.


2021 Canada Accessories Guide 379

SMARTCRAFT INSTRUMENTS


TACHOMETER SPEEDOMETER
CONTROLS AND RIGGING










79-8M0069418 108C31 180.52 79-8M0052853 110C99 184.99
6000 RPM tach gauge, white face, glass lens. Fits 85 mm dia. hole. 80 MPH/KPH Speed gauge, black face, glass lens. Fits 85mm dia. hole.
Application of this gauge will depend on the individual engine model and its
Application of this gauge will depend on the individual engine model and its available sensors.
available sensors. BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
TACHOMETER
TACHOMETER











79-8M0052854 110C99 184.99
79-8M0052875 110C99 184.99 7000 RPM Tach gauge, black face, glass lens. Fits 85mm dia. hole.
7000 RPM tach gauge, white face, glass lens. Fits 85 mm dia. hole.
Application of this gauge will depend on the individual engine model and its
Application of this gauge will depend on the individual engine model and its available sensors.
available sensors. BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
TACHOMETER
TACHOMETER












79-8M0069433 108C31 180.52
79-8M0069419 108C31 180.52 8000 RPM Tach gauge, black face, glass lens. Fits 85mm dia. hole.
8000 RPM tach gauge, white face, glass lens. Fits 85mm dia. hole. Application of this gauge will depend on the individual engine model and its
Application of this gauge will depend on the individual engine model and its available sensors.
available sensors. BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
SC 100 GLASS LENS GRAY 85 MM
SC 100 GLASS LENS BLACK 85 MM
SC100 System Link gauges allow you to monitor vital engine and boat
SC100 System Link gauges allow you to monitor vital engine and boat functions with digital accuracy. Furnished with a fog resistant lens, these
functions with digital accuracy. Furnished with a fog resistant lens, these gauges can be "daisy chain" interfaced between other SmartCraft
gauges can be "daisy chain" interfaced between other SmartCraft products using a plug‑in connection. SC100 link gauges can be
products using a plug‑in connection. SC100 link gauges can be connected to a SC1000 System Tach, a MercMonitor or System
connected to a SC1000 System Tach, a MercMonitor or System Monitor.
Monitor.











380 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

SMARTCRAFT INSTRUMENTS


SPEEDOMETER TACHOMETER CONTROLS AND RIGGING












79-8M0065980 108C31 180.52 79-8M0069461 108C31 180.52
80 MPH/KPH speed gauge, gray face, glass lens. Fits 85mm dia. hole. 8000 RPM tach gauge, gray face, glass lens. Fits 85mm dia. hole.
Application of this gauge will depend on the individual engine model and its
Application of this gauge will depend on the individual engine model and its available sensors.
available sensors. BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
SPEEDOMETER SC 100 SYSTEM LINK GAUGE 85 MM BEZELS






BEZEL 85 MM




79-8M0069459 108C31 180.52
120 MPH/KPH speed gauge, gray face, glass lens. Fits 85mm dia. hole.
Application of this gauge will depend on the individual engine model and its
available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
TACHOMETER
879872 1 4C81 8.02
Black
Fits large 3‑3/8 in.(85 mm) O.D. SC100 System Link gauges
Priced individually, sold @ multiples of 2
BEZEL 85 MM






79-8M0069460 108C31 180.52
6000 RPM tach gauge, gray face, glass lens. Fits 85mm dia. hole.
Application of this gauge will depend on the individual engine model and its
available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
TACHOMETER
879872 2 5C99 9.98
White
Fits large 3‑3/8 in.(85 mm) O.D. SC100 System Link gauges
Priced individually, sold @ multiples of 2
879872B 2 11C45 19.09
White
Fits large 3‑3/8 in.(85 mm) O.D. SC100 System Link gauges
Priced individually, sold @ multiples of 24


79-8M0065981 108C31 180.52
7000 RPM tach gauge, gray face, glass lens. Fits 85 mm dia. hole.
Application of this gauge will depend on the individual engine model and its
available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.

2021 Canada Accessories Guide 381

SMARTCRAFT INSTRUMENTS


BEZEL 85 MM TACHOMETER
CONTROLS AND RIGGING










879872 3 19C48 32.46 79-8M0052877 194C77 324.62
Chrome 7000 RPM tach gauge, white face, glass lens. Fits a 110mm dia. hole.
Fits large 3‑3/8 in.(85 mm) O.D. SC100 System Link gauges
Priced individually, sold @ multiples of 2 Application of this gauge will depend on the individual engine model and its
available sensors.
879872B 3 20C40 33.99 BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
Chrome
Fits large 3‑3/8 in.(85 mm) O.D. SC100 System Link gauges TACHOMETER
Priced individually, sold @ multiples of 24

SC 100 GLASS LENS WHITE 110 MM
SC100 System Link gauges allow you to monitor vital engine and boat
functions with digital accuracy. Furnished with a fog resistant lens, these
gauges can be "daisy chain" interfaced between other SmartCraft
products using a plug‑in connection. SC100 link gauges can be
connected to a SC1000 System Tach, a MercMonitor or System
Monitor.
79-8M0052876 194C77 324.62
4000 RPM tach gauge, white face, glass lens. Fits 110mm dia. hole.
Application of this gauge will depend on the individual engine model and its
available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
SPEEDOMETER
TACHOMETER (NO LOGO)











79-8M0052878 194C77 324.62
80 MPH/KPH speed gauge, white face, glass lens. Fits a 110mm dia. hole. 79-8M0069424 194C77 324.62
4000 RPM Tach gauge, no logo, white face, glass lens. Application of this gauge
Application of this gauge will depend on the individual engine model and its will depend on the individual engine model and its available sensors.
available sensors. BEZEL SOLD SEPERATELY. Used on all SmartCraft capable engines
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
TACHOMETER (NO LOGO)
TACHOMETER











79-8M0069432 194C77 324.62
79-8M0069431 191C30 318.84
8000 RPM tach gauge, white face, glass lens. Fits 110mm dia. hole. 5000 RPM Tach gauge, no logo, white face, glass lens. Fits 110mm dia. hole.
Application of this gauge will depend on the individual engine model and its
Application of this gauge will depend on the individual engine model and its available sensors.
available sensors. BEZEL SOLD SEPERATELY. Used on all SmartCraft capable engines
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
382 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

SMARTCRAFT INSTRUMENTS


4 IN 1 GAUGE (12 V) SPEEDOMETER CONTROLS AND RIGGING












79-8M0052879 228C86 381.43 79-8M0052857 194C77 324.62
4 in 1 gauge, white face, glass lens. Oil pressure (0‑100 psi), oil temperature, 80 MPH/KPH speed gauge, black face, glass lens. Fits 110mm dia. hole.
voltage (12V), and fuel level functions. Fits 110mm hole. Application of this gauge will depend on the individual engine model and its
available sensors.
Application of this gauge will depend on the individual engine model and its BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines. TACHOMETER
4 IN 1 GAUGE (12 V) NO LOGO











79-8M0052856 194C77 324.62
7000 RPM Tach gauge, black face, glass lens. Fits 110mm dia. hole.
79-8M0069423 229C04 381.72
4 IN 1 gauge, no logo, white face, glass lens. Oil pressure (0‑100 psi), oil Application of this gauge will depend on the individual engine model and its
temperature, voltage (12V), and fuel level functions. Fits 110mm dia. hole. available sensors.
Application of this gauge will depend on the individual engine model and its BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
available sensors.
BEZEL SOLD SEPERATELY. Used on all SmartCraft capable engines TACHOMETER
4 IN 1 GAUGE (24 V) NO LOGO











79-8M0052855 194C77 324.62
4000 RPM Tach gauge, black face, glass lens. Fits 110mm dia. hole.
79-8M0069422 228C87 381.44 Application of this gauge will depend on the individual engine model and its
4 IN 1 gauge, no logo, white face, glass lens. Oil pressure (0‑100 psi), oil available sensors.
temperature, voltage (24V), and fuel level functions. Fits 110mm dia. hole. BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
Application of this gauge will depend on the individual engine model and its
available sensors. TACHOMETER (NO LOGO)
BEZEL SOLD SEPERATELY. Used on all SmartCraft capable engines
SC 100 GLASS LENS BLACK 110 MM

SC100 System Link gauges allow you to monitor vital engine and boat
functions with digital accuracy. Furnished with a fog resistant lens, these
gauges can be "daisy chain" interfaced between other SmartCraft
products using a plug‑in connection. SC100 link gauges can be
connected to a SC1000 System Tach, a MercMonitor or System
Monitor.

79-8M0069438 194C77 324.62
4000 RPM Tach gauge, no logo, black face, glass lens. Fits 110mm dia. hole.
Application of this gauge will depend on the individual engine model and its
available sensors.
BEZEL SOLD SEPERATELY. Used on all SmartCraft capable engines

2021 Canada Accessories Guide 383

SMARTCRAFT INSTRUMENTS


4 IN 1 GAUGE (12 V) SPEEDOMETER
CONTROLS AND RIGGING










79-8M0052858 228C86 381.43 79-8M0065984 195C88 326.47
4 in 1 gauge, black face, glass lens. Oil pressure (0‑100 psi), oil temperature, 80 MPH/KPH speed gauge, gray face, glass lens. Fits a 110mm dia. hole.
voltage (12V), and fuel level functions. Fits 110mm dia. hole.
Application of this gauge will depend on the individual engine model and its
available sensors.
Application of this gauge will depend on the individual engine model and its BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines. SPEEDOMETER
4 IN 1 GAUGE (12 V) NO LOGO











79-8M0069463 190C04 316.75
65 MPH/KPH speed gauge, gray face, glass lens. Fits a 110mm dia. hole.
79-8M0069437 228C86 381.43 Application of this gauge will depend on the individual engine model and its
4 IN 1 gauge, no logo, black face, glass lens. Oil pressure (0‑100 psi), oil available sensors.
temperature, voltage (12V), and fuel level functions. Fits 110mm dia. hole. BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
Application of this gauge will depend on the individual engine model and its TACHOMETER
available sensors.
BEZEL SOLD SEPERATELY. Used on all SmartCraft capable engines
4 IN 1 GAUGE (24 V) NO LOGO









79-8M0069462 190C04 316.75
8000 RPM tach gauge, gray face, glass lens. Fits a 110mm dia. hole.
Application of this gauge will depend on the individual engine model and its
available sensors.
79-8M0069436 228C86 381.43 BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
4 IN 1 gauge, no logo, black face, glass lens. Oil pressure (0‑100 psi), oil
temperature, voltage (24V), and fuel level functions. Fits 110mm dia. hole. TACHOMETER
Application of this gauge will depend on the individual engine model and its
available sensors.
BEZEL SOLD SEPERATELY. Used on all SmartCraft capable engines

SC 100 GLASS LENS GRAY 110 MM

SC100 System Link gauges allow you to monitor vital engine and boat
functions with digital accuracy. Furnished with a fog resistant lens, these
gauges can be "daisy chain" interfaced between other SmartCraft
products using a plug‑in connection. SC100 link gauges can be
connected to a SC1000 System Tach, a MercMonitor or System
Monitor. 79-8M0065983 194C77 324.62
7000 RPM tach gauge, gray face, glass lens. Fits a 110mm dia. hole.
Application of this gauge will depend on the individual engine model and its
available sensors.
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.

384 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

SMARTCRAFT INSTRUMENTS


4 IN 1 GAUGE RETAINING NUT CONTROLS AND RIGGING












79-8M0065985 228C86 381.43 11-879950 11C53 19.23
4 in 1 gauge, gray face, glass lens. Oil pressure (0‑100 psi), oil temperature, Fits large 4‑5/16" (110 mm) SmartCraft System gauges.
voltage (12V), and fuel level functions. Fits 110mm dia. hole. Priced individually, sold @ multiples of 2
Application of this gauge will depend on the individual engine model and its
available sensors. MERCMONITOR WITH ACTIVE TRIM SUPPORT AND
BEZEL SOLD SEPARATELY. Works with all SmartCraft compatible engines.
N2K GATEWAY
SC 100 SYSTEM LINK- 110MM -BEZEL/MOUNTING MercMonitor fits in a standard SmartCraft SC1000 gauge 85 mm hole
HARDWARE and provides constant coverage of temperature, oil level, oil pressure,
water pressure, fuel level, battery voltage and other major engine
systems. Easily switches among the modes of RPM, fuel range in miles
and kilometers, fuel flow in gallons and liters, water depth (with use of
SmartCraft transducer), engine trim and engine hours. Latest
MercMonitor products support Active Trim interface. NMEA Gateway
functionality comes in three different levels depending on the amount of
data you want to transmit to the NMEA2000 network. This product also
BEZEL comes in Smart Tow versions, for use with Gen I (2007) and newer DTS
engines.







MERCMONITOR NMEA 2000 DATA LEVEL 1 KIT



879949 1 15C32 25.54
Black
Fits large 4‑5/16" (110 mm) O.D. SC100 System Link gauges
Priced individually, sold @ multiples of 2
879949 2 22C52 37.53
White
Fits large 4‑5/16" (110 mm) O.D. SC100 System Link gauges
Priced individually, sold @ multiples of 2
879949B 2 10C37 17.27 79-8M0135536 589C03 981.72
White MercMonitor Base verion has full SmartCraft functionality and will display all
information that is available on selected SmartCraft engines. Includes Active Trim
Fits large 4‑5/16" (110 mm) O.D. SC100 System Link gauges. interface and NMEA2000 gateway Level 1. Other features include Tri‑Color LED
Priced individually, sold @ multiples of 24 which allows user to pick backlight and button color. Screens include customizable
879949 3 28C38 47.29 favorites, descriptive fault text (Gen I (2007) and newer engines only), speed,
depth and much more. Three bezels included.
Chrome Software version 9.0 adds Active Trim, Active Exhaust, and Oil Level Status
Fits large 4‑5/16" (110 mm) O.D. SC100 System Link gauges support
Priced individually, sold @ multiples of 2
879949B 3 26C87 44.79
Chrome
Fits large 4‑5/16" (110 mm) O.D. SC100 System Link gauges.
Priced individually, sold @ multiples of 24












2021 Canada Accessories Guide 385

SMARTCRAFT INSTRUMENTS


MERCMONITOR NMEA 2000 DATA LEVEL 2 SMARTTOW MERCMONITOR - NO NMEA 2000
RPM KIT
CONTROLS AND RIGGING










79-8M0119406 418C98 698.30
79-8M0135617 773A72 1105.32 Software version 4.602 has full SmartCraft functionality (INCLUDING ECO
MercMonitor RPM SmartTow has full SmartCraft and SmartTow RPM functionality. SCREEN) and will display all information that is available on selected SmartCraft
SmartTow allows you to launch your boat using RPM profiles ONLY. Will display all engines. Includes Tri‑Color LED which allows user to pick backlight and button
information that is available on selected SmartCraft engines. Includes Active Trim color from menu. Screens include customizable favorites, descriptive fault text
interface and NMEA2000 gateway Level 2. Other features include Tri‑Color LED (Gen I (2007) and newer engines only), speed, depth and much more. Does not
which allows user to pick backlight and button color from menu. Screens include Include NMEA2000 Gateway functionality and does not include SmartTow or
customizable favorites, descriptive fault text (Gen I (2007) and newer engines Cruise. Three bezels included.
only), speed, depth and much more. Three bezels included. Fits 2002 and newer OptiMax Outboards, V‑6 EFI, 30‑60 EFI 4‑Stroke, all
Software version 9.0 adds Active Trim, Active Exhaust, and Oil Level Status SmartCraft compatible MerCruiser and Mercury Racing product. Does not support
support NMEA2000, Universal Fault Codes or the latest Tab module.
MERCMONITOR NMEA 2000 DATA LEVEL 3 SMARTTOW
PRO KIT SC1000 SYSTEM MONITOR (85MM)






SMARTCRAFT SC1000 SYSTEM MONITOR-ROUND/
BLACK




79-8M0135618 1271A65 1816.64
MercMonitor Gateway level 3 has full SmartCraft and SmartTow PRO functionality
(GPS Antenna INCLUDED). SmartTow Pro software allows you to launch your boat
using SPEED and RPM profiles. Will display all information that is available on
selected SmartCraft engines. Includes Active Trim interface and NMEA2000
multi‑engine gateway Level 3. Other features include Tri‑Color LED which allows
user to pick backlight and button color from menu. Screens include customizable
favorites, descriptive fault text (Gen I (2007) and newer engines only), speed,
depth and much more. Three bezels included.
Software version 9.0 adds Active Trim, Active Exhaust, and Oil Level Status 79-892219K19 249C73 416.22
support Front mount. Uses a 85 mm dia. hole. Delivers an alarm on battery, water pressure
and oil pressure. May provide additional information on fuel consumption, fuel
MERCMONITOR NMEA 2000 DATA LEVEL 3 GATEWAY range, engine hours, coolant temperature and engine trim depending on engine
PREMIER KIT type and its sensors.
Works with all SmartCraft compatible engines.
SMARTCRAFT SC1000 SYSTEM MONITOR-ROUND/
WHITE








79-8M0135619 1051A94 1502.78
MercMonitor Gateway Premier Kit has full SmartCraft and SmartTow RPM
functionality. SmartTow allows you to launch your boat using RPM profiles ONLY.
Will display all information that is available on selected SmartCraft engines.
Includes Active Trim interface and NMEA2000 multi‑engine gateway Level 3. Other 79-892219K20 242C62 404.37
features include Tri‑Color LED which allows user to pick backlight and keybutton
color from menu to match other gauges on vessel. Screens include customizable Front mount. Uses a 85mm dia. hole. Delivers an alarm on battery, water pressure
and oil pressure. May provide additional information on fuel consumption, fuel
favorites, descriptive fault text (Gen I (2007) and newer engines only), speed, range, engine hours, coolant temperature and engine trim depending on engine
depth and much more. Three bezels included. type and its sensors.
Software version 9.0 adds Active Trim, Active Exhaust, and Oil Level Status Works with all SmartCraft compatible engines.
support



386 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

SMARTCRAFT INSTRUMENTS


SC1000 SYSTEM MONITOR (52MM) MERCURY GATEWAY

MERCURY NMEA2000 SMARTCRAFT GATEWAY




SMARTCRAFT SC1000 SYSTEM MONITOR CONTROLS AND RIGGING






98-8M0165589 419C87 699.79
The Mercury NMEA2000 SmartCraft Gateway converts Mercury engine and
system data to NMEA 2000 for use on non‑Mercury gauges and displays for 1 to 4
engines. It also converts applicable NMEA2000 data to SmartCraft data for display
by applicable SmartCraft gauges and displays. Includes a NMEA 2000 "T"
connector for quick installation.
79-879896K21 226C71 377.86 Any instance where SmartCraft data is desired on the NMEA2000 bus. Applies to
Front mount. Uses a 52mm dia. hole. Delivers an alarm on battery, water pressure single through quad engine applications. Not required when a MercMonitor,
VesselView Link or VesselView403, 502, 703 or 903 are being used.
and oil pressure. May provide additional information on fuel consumption, fuel
range, engine hours, coolant temperature and engine trim depending on engine QUINT ENGINE GATEWAY MODULE
type and its sensors.
Works with all SmartCraft compatible engines.
SC1000 SYSTEM MONITOR BEZELS

BEZEL MONITOR





98-8M0165598 728C50 1214.17
CAN P module for quint engine applications.

SC 100 SYSTEM LINK (52MM) PLASTIC LENS GRAY
FACE/BLACK BEZEL GAUGES
8M6003662 24C54 40.91
Black Easily read analog System Link gauges allow you to track vital engine
Fits SC1000 System Monitor (Square) and boat functions with digital accuracy. Furnished with a fog proof
lens, these gauges can be "daisy chain" interfaced between other
BEZEL MONITOR SmartCraft products using a one wire plug‑in connection.






SC 100 SYSTEM LINK OIL TEMPERATURE GAUGE





8M6003663 18C52 30.88
White
Fits SC1000 System Monitor (Square)




79-879908K 1 84C87 141.45
English version oil temperature gauge, gray face. Fits a standard 2‑1/8 in. (52 mm)
dia. hole.
Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI
4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when
these models have the 555 ECM. Application of this gauge will depend on the
individual engine model and its available sensors.


2021 Canada Accessories Guide 387

SMARTCRAFT INSTRUMENTS


SC 100 SYSTEM LINK OIL TEMPERATURE GAUGE SC 100 SYSTEM LINK FUEL FLOW GAUGE
CONTROLS AND RIGGING










79-879909K 1 92C67 154.44 79-879912K 1 87C23 145.38
Metric version oil temperature gauge, gray face. Fits a standard 2‑1/8 in. (52 mm) English version fuel flow gauge, gray face. Fits a standard 2‑1/8 in. (52 mm) dia.
dia. hole. hole.
Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI
4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when 4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when
these models have the 555 ECM. Application of this gauge will depend on the these models have the 555 ECM. Application of this gauge will depend on the
individual engine model and its available sensors. individual engine model and its available sensors.
SC 100 SYSTEM LINK OIL PRESSURE GAUGE SC 100 SYSTEM LINK FUEL FLOW GAUGE













79-879917K 1 90C22 150.37 79-879913K 1 87C22 145.37
Metric version oil pressure gauge, gray face. Fits a standard 2‑1/8 in. (52 mm) dia. Metric version fuel flow gauge, gray face. Fits a standard 2‑1/8 in. (52 mm) dia.
hole. hole.
Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI
4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when 4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when
these models have the 555 ECM. Application of this gauge will depend on the these models have the 555 ECM. Application of this gauge will depend on the
individual engine model and its available sensors. individual engine model and its available sensors.
SC 100 SYSTEM LINK OIL LEVEL GAUGE SC 100 SYSTEM LINK RUDDER ANGLE GAUGE












79-879911K 1 87C23 145.38 79-879915K 1 87C22 145.37
Oil level gauge, gray face. Fits a standard 2‑1/8 in. (52 mm) dia. hole. Steering gauge, gray face. Fits a standard 2‑1/8 in. (52 mm) dia. hole.
Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI
4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when 4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when
these models have the 555 ECM. Application of this gauge will depend on the these models have the 555 ECM. Application of this gauge will depend on the
individual engine model and its available sensors. individual engine model and its available sensors.


















388 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

SMARTCRAFT INSTRUMENTS


SC 100 SYSTEM LINK WATER PRESSURE GAUGE SC 100 SYSTEM LINK WASTE LEVEL GAUGE CONTROLS AND RIGGING












79-879919K 1 90C22 150.37 79-879923K 1 92C20 153.67
Metric version water pressure gauge, gray face. Fits a standard 2‑1/8 in. (52 mm) Waste level gauge, gray face. Fits a standard 2‑1/8 in. (52 mm) dia. hole.
dia. hole. Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI
Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI 4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when
4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when these models have the 555 ECM. Application of this gauge will depend on the
these models have the 555 ECM. Application of this gauge will depend on the individual engine model and its available sensors.
individual engine model and its available sensors.
SC 100 SYSTEM LINK ENGINE SYNCHRONIZER GAUGE
SC 100 SYSTEM LINK VOLTAGE GAUGE











79-879924K 1 90C22 150.37
79-879921K 1 89C76 149.60 Engine synchronizer gauge, gray face. Fits a standard 2‑1/8 in. (52 mm) dia. hole.
Voltage gauge, gray face. Fits a standard 2‑1/8 in. (52 mm) dia. hole. Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI
Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI 4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when
4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when these models have the 555 ECM. Application of this gauge will depend on the
these models have the 555 ECM. Application of this gauge will depend on the individual engine model and its available sensors.
individual engine model and its available sensors.
SC 100 SYSTEM LINK WATER LEVEL GAUGE SC 100 SYSTEM LINK (85MM) PLASTIC LENS GRAY
FACE/BLACK BEZEL GAUGES

Easily read analog System Link gauges allow you to track vital engine
and boat functions with digital accuracy. Furnished with a fog proof
lens, these gauges can be "daisy chain" interfaced between other
SmartCraft products using a one wire plug‑in connection.





79-879922K 1 92C20 153.67
Water level gauge, gray face. Fits a standard 2‑1/8 in. (52 mm) dia. hole. SC 100 SYSTEM LINK SPEEDOMETER
Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI
4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when
these models have the 555 ECM. Application of this gauge will depend on the
individual engine model and its available sensors.








79-879906K 1 126C31 210.52
120 (mph or km/h) speedometer, gray face. Fits in a standard 3‑3/8" (85 mm) dia.
hole.
Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI
4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when
these models have the 555 ECM. Application of this gauge will depend on the
individual engine model and its available sensors.



2021 Canada Accessories Guide 389

SMARTCRAFT INSTRUMENTS


SC 100 SYSTEM LINK TACHOMETER SC 100 SYSTEM LINK TACHOMETER
CONTROLS AND RIGGING










79-879903K 1 123C09 205.15 79-879942K 1 200C52 334.18
8,000 RPM tachometer, gray face. Fits in a standard 3‑3/8" (85 mm) dia. hole. 6,000 RPM tachometer, gray face, large display. Fits in a 4‑5/16" (110 mm) dia.
Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI hole.
4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI
these models have the 555 ECM. Application of this gauge will depend on the 4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when
individual engine model and its available sensors. these models have the 555 ECM. Application of this gauge will depend on the
individual engine model and its available sensors.
SC 100 SYSTEM LINK (110 MM) PLASTIC LENS SC 100 SYSTEM LINK MULTIFUNCTION GAUGE
GRAY FACE/BLACK BEZEL GAUGES

Easily read analog System Link gauges allow you to track vital engine
and boat functions with digital accuracy. Furnished with a fog proof
lens, these gauges can be "daisy chain" interfaced between other
SmartCraft products using a one wire plug‑in connection.





79-879946K 1 209C47 349.12
SC 100 SYSTEM LINK SPEEDOMETER Combination water temperature, oil pressure, voltage and fuel gauge.
Gray face, large display. Fits in a 4‑5/16" (110 mm) dia. hole.
Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI
4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when
these models have the 555 ECM. Application of this gauge will depend on the
individual engine model and its available sensors.

SC 100 SYSTEM LINK (52MM) PLASTIC LENS
WHITE FACE/CHROME BEZEL GAUGES

Easily read analog System Link gauges allow you to track vital engine
and boat functions with digital accuracy. Furnished with a fog resistant
79-879945K 1 208C44 347.38 lens, these gauges can be "daisy chain" interfaced between other
80 (mph or km/h) speedometer, gray face, large display. Fits in a 4‑5/16" (110 mm) SmartCraft products using a one wire plug‑in connection. SC100 link
dia. hole. gauges require a master gauge such as an SC1000 System Tach, a
MercMonitor, or a System Monitor in order to function. These gauges
Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI
4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when have chrome bezels.
these models have the 555 ECM. Application of this gauge will depend on the
individual engine model and its available sensors.
SC 100 SYSTEM LINK TACHOMETER












79-879943K 1 208C44 347.38
8,000 RPM tachometer, gray face, large display. Fits in a 4‑5/16" (110 mm) dia.
hole.
Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI
4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when
these models have the 555 ECM. Application of this gauge will depend on the
individual engine model and its available sensors.


390 Telephone Order and Assistance, (905) 636-4749; Fax (800) 217-6517

SMARTCRAFT INSTRUMENTS


SC 100 SYSTEM LINK RUDDER ANGLE GAUGE SC 100 SYSTEM LINK ENGINE TEMPERATURE GAUGE CONTROLS AND RIGGING












79-879915K31 186C68 311.13 79-879907K11 90C22 150.37
Steering gauge, white face/chrome bezel. Fits a standard 2‑1/8 in. (52 mm) dia. Metric version engine temperature gauge, white face. Fits a standard 2‑1/8 in. (52
hole. mm) dia. hole.
Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI
4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when 4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when
these models have the 555 ECM. Application of this gauge will depend on the these models have the 555 ECM. Application of this gauge will depend on the
individual engine model and its available sensors. individual engine model and its available sensors.
SC 100 SYSTEM LINK OIL PRESSURE GAUGE SC 100 SYSTEM LINK OIL TEMPERATURE GAUGE













79-879916K31 90C22 150.37 79-879909K11 90C22 150.37
English version oil pressure gauge, white face with Chrome Bezel. Fits a standard Metric version oil temperature gauge, white face. Fits a standard 2‑1/8 in. (52 mm)
2‑1/8 in. (52 mm) dia. hole. dia. hole.
Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI
4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when 4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when
these models have the 555 ECM. Application of this gauge will depend on the these models have the 555 ECM. Application of this gauge will depend on the
individual engine model and its available sensors. individual engine model and its available sensors.
SC 100 SYSTEM LINK OIL PRESSURE GAUGE
SC 100 SYSTEM LINK (52MM) PLASTIC LENS
WHITE FACE/WHITE BEZEL GAUGES

Easily read analog System Link gauges allow you to track vital engine
and boat functions with digital accuracy. Furnished with a fog proof
lens, these gauges can be "daisy chain" interfaced between other
SmartCraft products using a one wire plug‑in connection.




79-879916K11 89C76 149.60
English version oil pressure gauge, white face. Fits a standard 2‑1/8 in. (52 mm)
SC 100 SYSTEM LINK ENGINE TEMPERATURE GAUGE dia. hole.
Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI
4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when
these models have the 555 ECM. Application of this gauge will depend on the
individual engine model and its available sensors.








79-879920K11 89C76 149.60
English version engine temperature gauge, white face. Fits a standard 2‑1/8 in. (52
mm) dia. hole.
Fits 2001 and newer OptiMax Outboards, 2002 and newer V‑6 EFI, 30‑60 EFI
4‑Stroke, all SmartCraft compatible MerCruiser and Mercury Racing product when
these models have the 555 ECM. Application of this gauge will depend on the
individual engine model and its available sensors.

2021 Canada Accessories Guide 391