2016 Catalog PDF

HARDWARE 699

Stainless Steel Safety Hasp

ORDER NO. LENGTH STYLE FASTENER CTN. PRICE Grabber Catch

For use on doors and drawers. Made from high-
impact plastic and corrosion resistant materials, the
spring-loaded, over-center action allows you to pull
open and push close. Black only. OEM approved.

SDG 2211201 2-7/8” 1” #5FH 10 EA. $7.23 ORDER NO. PRICE

TIM 29217 $18.94

Stamped Stainless Locking Soft Draw Latch (4”)
Hasp with Keys
Non-corrosive, UV resistant. Hardware is consealed when
latched. Latch reduces vibration. Used on
motorboxes, doors, and other
closures. Stainless hardware, OEM approved.

ORDER NO. LENGTH FASTENER CTN. PRICE ORDER NO. PRICE

SDG 2211501 3” #7 FH 10 $16.17 TIM 29211 $35.77

Stainless Steel Swivel Hasp Flexible T-Handle Draw Latches

Rubber T-Handle is UV resistant for long life and
ease of use. For a multitude of uses on boats and
RV’s. Hold down brackets are reinforced nylon.
Can be mounted vertically or horizontally.

ORDER NO. PRICE

ORDER NO. LENGTH STYLE FASTENER CTN. PRICE TIM 29214 $24.20

SDG 2211301 2-7/8” 1” #7FH 10 EA. $10.99

Swivel Hasp T-Handle Draw Latches With Reverse Keeper

Die cast zinc chrome-plated Rubber T-Handle is UV resistant for long life and ease of
use. For a multitude of uses on boats and RVs. Hold down
brackets are all stainless steel. Can be mounted vertically or
horizontally.

ORDER NO. LENGTH PRICE ORDER NO. SIZE PRICE
TIM 29215 3” $24.20
SDG 2241301 3” $9.25 TIM 29213 4” $27.35

Chrome Brass Hinged Chain Deck Pipe Brass Chrome-Plated

Stud Catches

With Stainless Ball & Spring

ORDER NO. PRICE BASE LINE ORDER NO. LENGTH FASTENER PACK PRICE
SDG 3220801 $27.44 DIA. SIZE SDG 2228221 10 pr $7.17
1-15/16” #4 FH
3-1/4” 1”

Brass Stud Catches Elbow Catches

2 per card. Die cast zinc alloy
chromium-plated

Pkg. 10. 1 per card.

ORDER NO. LENGTH FASTENER CTN. PRICE

SDG 2228411 1-5/8” #4 FH 10pr $5.54 DIMENSIONS
INCHES
SDG 2228421 1-15/16” #4 FH 10pr $6.66 ORDER NO. PRICE
PER 1056DP0CHR
SDG 2228431 2-1/4” #6 FH 10pr $7.96 1-1/8x9/16 $17.06

700 HARDWARE

Round T-Handle Latch Compression Handle Latches

Investment Cast 316 Stainless Nylon Body compression with a stainless handle handles reduce and
eliminate noise and rattle from hatches while underway.
ORDER NO. DIAMETER CUT OUT PRICE The handle uses a compressed gasket to create a
SDG 2219101 2-7/16” SIZE $30.99 water-tight seal for compartments or hatches.

2” ORDER NO. DESCRIPTION PRICE
WHT 6228W Keyed $51.99
Flush Pull Injection WHT 6230W $43.32
Molded Delrin Non-Keyed

Black 2-3/16” O. D. Flush Lift Ring 316 Stainless

ORDER NO. CTN PRICE ORDER NO. LENGTH WIDTH FAST PACK PRICE
SDG 2273101 10 $3.34 SDG 2218601 3” 2-1/8” #10 10 $21.98

Surface Mount Lift Ring Flush Ring Pull

Stamped 304 Stainless Chrome-plated zinc.

ORDER NO. LENGTH WIDTH PACK PRICE ORDER NO. O.D. PRICE
SDG 2218301 2-1/8” 1-15/16” 10 $7.25 PER 1232DP1CHR 1-5/8 $16.41

Stainless Cast Ring Pull Flush Lifting Handle

ORDER NO. LENGTH WIDTH FAST PACK PRICE Chrome-plated zinc.

SDG 2218501 1-15/16” 1-1/2” #8 FH 10 $12.41 ORDER NO. PRICE Dimensions Inside
PER 1220DP0CHR $21.65 Face Plate Handle
Stainless Steel Flush Hatch
Handle Inches Inches

3x2-1/4 1-7/8x1

ORDER NO. LENGTH WIDTH FAST PACK PRICE Flush Hatch Dog
SDG 2218201 3” 2-1/4” #8 FH 10 $9.22
• Chrome-plated brass.
Stainless Spring Loaded • Stainless Steel Lock Nuts.
Flush Lift Handle • With Flush Strike.
• “O” Ring Seals for Water Resistance.
• Face plate dimensions: 3-13/16” x 3”.

ORDER NO. LENGTH WIDTH FASTENER PRICE ORDER NO. SIZE PRICE
PER 777000CHR 1/4” $144.70

SDG 2218101 2-1/2” 2-1/4” #8 FH $8.49

SDG 2218151 1-3/4” 1-1/2” #6 FH $8.20 Flush Hatch Lifting Ring

Safety Type – Pressure Cast Bronze
No recess to catch heels, chair or table legs, etc.

Flush Ring Catches Pkg.10. 1 per card.

Die cast zinc alloy chromium-plated. ORDER NO. DIMENSIONS PRICE
INCHES
Phosphor bronze spring.
PER 0575DP0CHR 2-5/8x2 $50.65

ORDER NO. OVERALL PRICE
INCHES

PER 1051DP0CHR 2-1/4 X 1-3/8 $29.22 Pkg.-10 Flush Mount Pull

Push to Close Southco Latch Southco Latch

Pop-out Knob Design – Knob stores flush; “pops-out” at a touch • Pull to open
• Turn the knob to open, push the door to close • Keylocking style restricts access
• Latches securely with knob in or out • Corrosion-resistant materials
• Accommodates misalignment • Inside actuation when locked or unlocked
• Quick, round-hole installation • Single, round-hole installation
• Corrosion and UV Resistant
• Chrome Plated ORDER NO. COLOR/STYLE PRICE

TIM 29200 White/Non-Locking $35.77

TIM 29201 White/Locking $44.20

TIM 29202 Black/Non-Locking $35.77

ORDER NO. DESCRIPTION PRICE TIM 29203 Black/Locking $44.20

TIM 29209 Push/Twist $43.24 TIM 29206 Stainless/Non-Locking $70.52
TIM 29210 Push/Pull $42.23
TIM 29207 Stainless/Locking $82.09

HARDWARE 701

Corrosion Resistant Push Lock Slam Latch Stainless Steel

Features: Non-Locking 316 Stainless Steel Slam Latch.
• Push the door to latch. Flange - 2-3/8” Depth - 1-1/2” Fastener is provided
• Push the button to unlatch. Includes striker plate
• Locking
ORDER NO. DESCRIPTION PRICE
ORDER NO. PRICE WHT 6096 Non-Locking $47.01
TIM 29208 $35.77 WHT 6097 Locking $52.14

Door Buttons Elbow Catch

Die cast zinc alloy chromium-plated. Black plastic Injection molded nylon.
knob. Eliminates rattling doors. Phosphor bronze coil
spring under knob holds button against the plate. ORDER NO. CTN. PRICE
Overall Inches 1-3/4. Pkg. 5. Sold Each. SDG 2270301 10 $6.98

ORDER NO. PRICE Rope Deck Pipe
PER 1216DP0CHR $14.59
Die cast zinc alloy chromium-plated with
hinged cover.

ORDER NO. MAX. ROPE O.D. PRICE
PER 0757DP0CHR SIZE 3-3/8” $37.80

1”

Rope Deck Pipe Chrome Brass Chain 3220751
Deck Pipe
Hinged, Snap-Down Cover
U.V. stabilized, fiber reinforced high
impact white or black plastic

ORDER NO. DESCRIPTION PRICE

ORDER NO. MAXIMUM COLOR O.D. PRICE SDG 322070 6-3/8” L x 4-1/2” W $46.50
ROPE SIZE FLANGE Line Size to 1”
PER 1057DP0WHT White $22.76
PER 1057DP0BLK 2-7/8” Black 3-3/4” $22.76 SDG 3220751 Replacement Cap $27.95 322070
& Chain
2-7/8” 3-3/4”

Surface Mount Hinged Deck Pipe

Locking Lift Ring Investment Cast 316 Stainless

Stamped 304 stainless/die cast
zinc lock. Every lift ring comes with
two matching keys.

ORDER NO. LENGTH WIDTH DEPTH PRICE ORDER NO. A B C D E F PRICE
SDG 2218311 2-1/8” 1-15/16” 1-1/2” $14.94
SDG 321806 4-1/16” 5-3/8” 2-3/4” 4-1/8” 2-7/16” 3-3/4” $83.93
Hatch Cover Pull
Flush Mount Slam Latch
Stamped 304 stainless.
Injection Molded Nylon
ORDER NO. LENGTH PRICE 2-7/16” diameter
SDG 2218401 2-3/16” $5.45 hole cut out 2”

ORDER NO. DESCRIPTION PRICE
SDG 2281201 White $9.98
SDG 2281251 Black $9.98

702 HARDWARE

Flush Ring Pulls Elbow Catch

Die Cast Zinc Alloy Chromium-Plated. Extruded Brass, Chrome-Plated
Package 10. Sold each. 2 per card.

ORDER NO. DIMENSIONS PRICE
PER 0841DP0CHR 1-3/4 X1-3/8 $17.29

ORDER NO. CTN. PRICE
SDG 2223301 10 $9.12

Ring Pull Twin Roller Door Catch

Die cast brass. White Injection Molded Nylon

ORDER NO. DIMENSIONS FASTENER CTN. PRICE ORDER NO. PRICE
SDG 2224001 1-3/4” x 1-1/2” #6 FH 10 $8.22

SDG 227141 $0.55

Door Catches Flexible Door Catch

White plastic with stainless steel Injection molded nylon/stamped
mounting and keeper screws. 304 stainless
2 pieces per card. 2 per card.

ORDER NO. DIMENSIONS SCREW PRICE ORDER NO. LENGTH LENGTH BALL PRICE
SIZE CATCH HEAD SCREW

PER 0554DP 1-1/4” x 5/8” 3/4” #8 $11.84 SDG 2270231 1-1/4” 3/4” $9.99

Nylon Door Catch Push Button Rim Latch

Set of four. Plastic/plastic housing
chrome button.
ORDER NO. DIMENSIONS CTN. PRICE
SDG 2271351 1/2” x 1-3/16” 10 $7.25 ORDER NO. PRICE
SDG 2243121 $12.95

Improved – Spring Loaded “Polydel” Door Catches-

Flush Pull Black – Delrin ball stud – Polyethylene Catch
Holds door firmly in place against vibration and motion. 2 pieces
Supplied with a black plastic finishing flange die per card.
cast zinc alloy chromium-plated.
This modern styled ring pull solves many ORDER NO. STUD SIZE CATCH SIZE PRICE
installation problems. It can be used vertically for INCHES
doors or drawers and also horizontally for small
hatches, lids or ice boxes, fish boxes, storage PER 0559DP 1-1/8 X 3/8 1-3/8 X 7/8 $7.82
compartments, etc. Mounted vertically can be
used as a concealed coat hangar hook.
Package 5. Sold each.

Heavy Duty

Flush Hatch Lifting Handle

Pressure cast bronze.
Stainless steel pin.

Chrome Plated Bronze

ORDER NO. DIMENSIONS PRICE ORDER NO. DIMENSIONS DIMENSIONS PRICE
PER 1221DP0CHR PLATE INCHES INCHES INSIDE HANDLE
PER 0776DP1CHR $68.97
3/4x3-1/4 $19.18 PER 0776DP2CHR 3 x 2-1/4 INCHES $89.24
3-3/4 x 2-3/4
1-7/8 x 1

2-3/16 x 1-3/16

HARDWARE 703

Door Stop Cabin Door Hooks

Chrome-plated zinc. Pressure Cast Bronze.
Rubber bumper. Package 5. 1 per card.
Package 5. 1 per card.

ORDER NO. LENGTH O.D. PRICE LENGTH
INCHES INCHES INCHES
ORDER NO. PRICE

PER 1177DP0CHR 1 1-1/4 $10.72 PER 0956DP1CHR
PER 0956DP2CHR
PER 0956DP3CHR 1-1/2 $28.79
PER 0956DP4CHR
PER 0956DP5CHR 2 $30.49
PER 0956DP6CHR
2-1/2 $30.87

3 $31.70

Knob Chrome Plated Brass 3-1/2 $34.08

Stainless 4 $45.60
Pacakge 10. 1 per card. Steel Screw

ORDER NO. MAX. PANEL THICKNESS PRICE
PER 0925DP0CHR O.D. INCHES INCHES

1 1-1/8 $18.26 Cabin Door Hooks

Die Cast Zinc Alloy Chromium-plated.
Package 20. 1 per card.

ORDER NO. LENGTH PRICE
INCHES

Pull and Latch Assembly PER 1199DP1CHR 1-3/4 $12.58

Chrome-plated zinc. PER 1199DP2CHR 2-1/4 $13.60
Black plastic insert.
Brass stem. PER 1199DP3CHR 3 $14.00

PER 1199DP4CHR 4 $14.17

ORDER NO. O.D. KNOB MAX. PANEL PRICE
INCHES THICKNESS

INCHES

PER 0938DP0CHR 1-1/2 1-1/8 $28.72

Cabin Door Hooks

Die Cast Zinc Alloy Chromium-plated.
Spare keepers, 1261 DP CHR, 2 per card.
Package 20. 1 per card.

Elbow Catch ORDER NO. LENGTH PRICE
INCHES
Black plastic.
Integral spring. PER 1287DP1CHR 2 $12.54

Package 25 PER 1287DP2CHR 2-1/2 $13.58
2 pieces per card

ORDER NO. DIMENSIONS PRICE PER 1287DP3CHR 3 $14.17
PER 1021DP0BLK INCHES

3/16 x 5/8 $7.15

Chrome Brass Door Stop and Catch

Door Hook Investment cast 316 stainless.

Sold Each. The Sea-Dog Stainless Door Stop holds the door securely against
the rubber stop reducing rattles which are common with
most door hooks. The spring loaded latch allows
for quick and easy release.

ORDER NO. LENGTH FAST STD. PACK PRICE BASE
ENER DIA.
SDG 2221121 2” ORDER NO. HEIGHT PRICE
SDG 2221131 2-3/4” #6 FH 10 $5.99

#6 FH 10 $6.73 SDG 2217101 2” 2-1/2” $32.02

Door Hook Magnetic Door Stop

Machined AISI 304 Stainless 304 Stainless

ORDER NO. LENGTH FASTENER PRICE ORDER NO. SIZE PRICE
SDG 2217501 1-9/16” Tall $97.75
SDG 2212021 2-3/8” #8 FH $9.49 SDG 2217551
3” Tall $104.95
SDG 2212031 3” #8 FH $9.77

704 HarDware

Tee rail and elbows

Sold each.

cast 316 Stainless Steel

orDer No. DeScrIPTIoN TUBe USe cTN. PrIce 2909001
2909011
SDG 2906001 60° Universal Tee 7/8” LT. 10 ea $14.67
SDG 2906011 60° Universal Tee 1” LT. 10 ea. $14.74 2916001
SDG 2909001 7/8” RT. 10 ea. $13.75 2916011
SDG 2909011 90° Tee 1” RT. 10 ea. $15.91 2926001
SDG 2916001 90° Tee 7/8” 10 ea. $13.32 2926011
SDG 2916011 60° Tee 1” 110° 10 ea. $16.93
SDG 2926001 60° Tee 7/8” 10 ea. $13.82 2809001
SDG 2926011 60° Tee 1” 10 ea. $16.93 2809011
SDG 2950901 60° Tee 7/8” 10 ea. $13.98
SDG 2950911 90° Elbow 1” 10 ea. $16.75 2814501
SDG 2951101 90° Elbow 7/8” 5 ea. $32.26 2814511
Bow Form

2951101 2906001
2906011

Base rail Fittings

Sold each.

cast 316 Stainless Steel

orDer No. DeScrIPTIoN TUBe BaSe FaSTeNer PrIce

SDG 2803001 30° Round Base 7/8” 2.7”OD #10 $15.52 2806001
SDG 2803011 30° Round Base 1” 2.8”OD 1/4” $16.98 2806011
SDG 2804501 45° Round Base 7/8” 2.5”OD #10 $15.27
SDG 2804511 45° Round Base 1” 2.8”OD 1/4” $18.26 2813001
SDG 2806001 60° Round Base 7/8” 2.5”OD #10 $16.25 2813011
SDG 2806011 60° Round Base 1” 2.8”OD 1/4” $18.75
SDG 2809001 90° Round Base 7/8” 2.5”OD #10 $15.26
SDG 2809011 90° Round Base 1” 2.8”OD 1/4” $17.27
SDG 2813001 30° Rectangular Base 7/8” 3”X1.7” #10 $14.96
SDG 2813011 30° Rectangular Base 1” 3.5”X1.9” 1/4” $16.01
SDG 2814501 45° Rectangular Base 7/8” 3”X1.7” #10 $15.27
SDG 2814511 45° Rectangular Base 1” 3.5”X1.9” 1/4” $17.27
SDG 2816001 60° Rectangular Base 7/8” 3”X1.7” #10 $14.96
SDG 2816011 60° Rectangular Base 1” 3.2”X1.8” 1/4” $17.27
SDG 2819001 90° Rectangular Base 7/8” 3”X1.7” #10 $14.96
SDG 2819011 90° Rectangular Base 1” 3”X1.8” 1/4” $16.98

STD. PACK 10

2803001 2804501 2816001 2819001
2803011 2804511 2816011 2819011

HarDware 705

Base rail Fittings

Die cast zinc chrome-plated.

orDer No. DeScrIPTIoN TUBe o.D. BaSe PrIce

SDG 2860301 30° Round Base 7/8” 2-5/8” $15.82 2860301 2860601 2860901

SDG 2860601 60° Round Base 7/8” 2-5/8” $8.42

SDG 2860901 90° Round Base 7/8” 2-5/8” $8.99

SDG 2861301 30° Rectangular Base 7/8” 2-5/8” $13.95

SDG 2861451 45° Rectangular Base 7/8” 2-5/8” $13.97

SDG 2861601 60° Rectangular Base 7/8” 2-5/8” $8.74

SDG 2861901 90° Rectangular Base 7/8” 2-5/8” $8.99

2861301 2861601 2861901
2865661

Hand rail Fittings

Die cast zinc chrome-plated.

orDer No. DeScrIPTIoN raIL HeIGHT TUBe o.D. PrIce

SDG 2865601 60° Center 2-1/8” 7/8” $8.51 2865651 2865601
2869551
SDG 2865651 60° End-Left Hand 2-1/8” 7/8” $8.51

SDG 2865661 60° End-Right Hand 2-1/8” 7/8” $8.51

SDG 2869551 5 1/2° Blend Base 7/8” $14.24 2862901

SDG 2862901 Bullet End 7/8” $7.27

rail Tees

Die cast zinc chrome-plated.

orDer No. DeScrIPTIoN TUBe o.D. PrIce 2960901 2962601 2961601
SDG 2960901 90° Tee 7/8” $8.03
SDG 2960951 90° Elbow 7/8” $13.96 2960951 2965101
SDG 2961601 7/8” $14.47
SDG 2962601 60° Tee-Left Hand 7/8” $14.47
SDG 2965101 60° Tee-Right Hand 7/8” $18.99

110° Bow Form

Stainless Steel Stainless Steel Hand rail Fittings
60°round Base
2899001
2899011

orDer No. o.D. DeSc. PrIce 2851601 2851201 2850601
SDG 2850601 7/8” Center $10.77 2851611 2850611
SDG 2850611 1” Center $14.27
orDer No. TUBe oD BaSe FaSTeNer PrIce SDG 2851601 7/8” End 60° $12.72
SDG 2851611 1” End 60° $15.27
aTT 660403 7/8” 2-1/2”OD #10 $21.92 SDG 2899001 7/8” End $36.95
SDG 2899011 1” End $41.52
SDG 2851201 7/8” End 120° $12.73

706 HARDWARE

Aluminum Tubing Set Screw

7/8” OD corrosion resistant 1/4”-28 x 3/16” cone point
marine alloy tubing. Furnished 10 per card
in 12’ lengths to dealers.
ORDER NO. CTN. PRICE
ORDER NO. O.D.SIZE WALL PRICE SDG 2999991 10 $4.25

TAC A237858BLY 7/8” 1/16” $52.10 R

Stainless Steel Tubing Teakwood Step Plates

Stainless steel tubing for new or
replacement rails, ladders, etc.
Furnished in 12’ lengths to dealers.

ORDER NO. O.D.SIZE WALL PRICE

MES 7812 7/8” 3/64” $86.40

MES 0112 1” 3/64” $99.43

Flexible Grab Handle

w/Molded Grip

Length: 9-3/8”
Webbing: Polypropylene
Handle: Molded Polypropylene

ORDER NO. PRICE
WHT S7098P $5.79

LED Stud Mount ORDER NO. DESCRIPTION PRICE
WTR 60502 $23.18
Hand Rail WTR 60504 Deck Step, Large $14.31
WTR 60506 15” x 6” x 1/2” $13.25
Formed 304 Stainless
LED Stud Mount Hand Rails have six blue LED’s in each mounting Deck Step, Medium
base piece and are shipped as three pieces – one handrail and two 11-1/2” x 4-1/2” x 1/2”
bases. 12 volt DC.
Deck Step, Small
ORDER NO. SIZE PRICE 8-3/4” x 3-1/2” x 1/2”
SDG 2545091 9” $57.45
SDG 2545121 12” $60.45
SDG 2545181 18” $65.45

Stainless Stud Mount Hand Rail

304 Stainless Steel

Die Cast Zinc Alloy Frames

Chromium-plated molded black plastic.
Non-skid pads. Pack 1 pr.

ORDER NO. SIZE PRICE
SDG 2541061 6” $20.45
SDG 2541121 12” $27.36
SDG 2541181 18” $33.50
SDG 2541241 24” $39.54

Surface Mount Hand Rail

Stainless Steel 1” Dia.

ORDER NO. OVERALL HOLE HEIGHT O.D. PRICE DIMENSIONS OVERALL
LENGTH CENTER
SDG 2543121 2-3/8” 5/16” $27.49 ORDER NO. INCHES PRICE
SDG 2543181 12-1/4” 11-3/16” 2-3/8” 5/16” $35.50
SDG 2543241 18-1/4” 17-3/16” 2-3/8” 5/16” $43.50 PER 1325DP0CHR 8-3/8x2-1/4 $35.67
24-1/4” 23-3/16”
PER 1325DP1CHR 8-3/4x3-1/4 $45.04

Tunnel Blowers VENTILATION 707

754 Blowers

3” intake, 3” exhaust with remote mounting bracket. Jabsco Flexmount blowers are constructed of a tough reinforced plastic
7-3/4” length, 5” mounted height. CFM 138 housing, one piece Delrin Plastic rotor, and long life, low current motor.
754RC Water resistant Universal Flexmount bracket provides easy installation on any type
surface in any convenient location. Both inlet and outlet ports have
751 slip-on connections for flexible ducts. Mounting bracket may be rotated
to permit mounting the blower with the discharge port facing in any
4” intake, 4” exhaust with remote mounting bracket. direction. 3” and 4” port sizes available D.C. blowers meet applicable
5-1/4” length, 5” mounted height. CFM 223 sections of the U.S. Coast Guard Electrical Regulations (Title 33,
751RC Water resistant Chapter I, Part 183, Subpart 1), and are listed as B.I.A. type accepted.

Detroit Marine Engineering offers a complete line of 12 volt DC tunnel
blowers for galley, head or engine compartment ventilation. The tunnel
design places the motor in the center of the air flow for cooler operation,
which results in a lower amperage draw. Vanes inside the blower housing
direct the air for decreased turbulence and increased efficiency and
output. All models are BIA approved and rated and meet USCG Safety
Standards.

ORDER NO. PRICE

DET 751 $33.00 ORDER NO. CFM CUCM SEC. VOLT IN OUT PRICE

DET 751RC $35.07 ITT 355150010 105 49,600 12 3” 3” $129.97
ITT 367400000 150 70,800 12 3” 3” $184.64
DET 754 $33.00 ITT 354400000 250 118,000 12 4” 4” $237.06

DET 754RC $35.07

Yellowtail™ In-Line Blower

The toughest blower available. Specifically designed to withstand the harsh marine environment,
the Yellowtail In-Line blower comes standard with a fully protected heavy duty encased motor and
tinned wire assembly. SHURflo has developed a unique nylon fan that includes 6 blades to ensure
high performance and efficient ventilation. Installation of the Yellowtail™ Blower is made easy with
extended barbs and slotted mounting bracket. 3 Year Warranty.

ORDER NO. DESCRIPTION PRICE
SHU 2773110 3” Blower $36.31
SHU 2774110 4” Blower $38.55

Turbo Charged Ventilation

-for safe start-ups

turbo in-line blower (1731, 1747)
The most advanced marine ventilation system available today. The Turbo
uses a revolutionary in-line design to provide quick, efficient ventilation of bilge gases.

Turbo 3000-3” I. D. Hose Turbo 4000-4” I. D. Hose

ORDER NO. DESCRIPTION PRICE ORDER NO. DESCRIPTION PRICE

ATT 17314 Standard $36.47 ATT 17474 Standard $43.94

Water-Resistant Turbo 3000
• Provides 145 cubic feet per minute air flow.
Turbo in-line blower (1733, 1749) • For 3” I.D. hose.
Attwood also offers water-resistant Turbo Blower models that feature
a special sealed motor, for installations where heavy moisture may be Turbo 4000
present. Their durability is proven under rigorous moisture tests. • Provides 230 cubic feet per minute air flow.
• For 4” I.D. hose.
Turbo 3000-3” I. D. Hose Turbo 4000-Turbo 4” I. D. Hose • Five-blade design maximizes air flow, exceeding other blowers by

ORDER NO. DESCRIPTION PRICE ORDER NO. DESCRIPTION PRICE up to 25%.
ATT 17334 Water Resistant $41.73 ATT 17494 Water Resistant $47.76

Meets ABYC, U.S. Coast Guard, and ISO standards; NMMA listed.

708 VENTILATION

Clam Shell Ventilator Economy Inline Bilge Blowers

Chrome-Plated Brass • High output
• Low amp draw
ORDER NO. DIMENSIONS HEIGHT WIDTH PRICE • Quiet operation
PER 0339DP0CHR INCHES • Water resistant seals for long life
OPENPIkNgG.-5OPENING • 12 V DC
INCHES INCHES

4x3-3/4 1-5/8 2-1/2 $45.66

Bilge Blower Flange Mount

Mounts directly to the hull or collector box. Inlet
hose twist locks into place, thus eliminating
clamps. Built-in mounting brackets.

ORDER NO. PRICE Capacity: 112 CFM ORDER NO. DESCRIPTION PRICE
JHN 54124 $116.99 Voltage: 12.0 V DC RUL 140 3” Bilge Blower $45.77
Amp Draw: 5.5 amps RUL 240 4” Bilge Blower $49.94
Hose Size:
3”

“Chromalex” Cowl Flanged Ventilator With Collar

Ventilator Zinc alloy, Fig. 870 is all die cast zinc alloy.

Die cast zinc alloy – chromium-plated. chromium-plated.
Black plastic base – for 3 inch duct. Duct threads into size 2 collar.
Designed for fast mounting. No screw heads No clamps necessary.
will show. Has integral sir scoop. No hose
clamps necessary – duct threads into collar.

ORDER NO. MOUTH LENGTH WIDTH HEIGHT PRICE ORDER NO. I.D. MOUTH LENGTH WIDTH PRICE
PER 1312DP0CHR SQUARE 5-3/4” OVERALL OVERALL SQUARE OVERALL OVERALL $44.17

7” 4-3/8” 2-5/8” $36.64 PER 0870DP0CHR 3” 7” 5-1/4” 4”

Extra Heavy Duty Radial Blower

Marine ventilation blowers that are designed for engine compartment ventilation

prior to start up. AirV heavy duty blowers are designed for continuous duty

and can therefore be used for air intake or extraction in bilges, galleys, accommodation and other

compartments.

• Flange Mount design • 3” Hose size

• High-impact anti-shock ABS body • 163 CFM

• Low power consumption • 9 amps

• Double ball bearing motor, designed

for continuous duty

ORDER NO. PRICE
JHN 804741601 $152.63

Flangemount Blowers Vetus UFO Stainless Deck Ventilator

Flangemount blowers conveniently These models are made of stainless steel and they cannot be closed,
mount on any flat mounting surface, so that they will ensure permanent ventilation. These ventilators are rain
attach directly to the surface with and splash proof and the outside is high-gloss polished. They may also
screws through the mounting flange. Reinforced be used in combination with our electric extraction ventilator (FAN12).
plastic housing is tough, corrosion proof, deadens They come complete with a mosquito screen and an interior finishing
sound, and provides smooth efficient high volume air ring as standard.
flow. Rotor is one piece Delrin plastic, dimensionally
stable to stay in balance with no bent blades to rattle or corrode. Reliable
automotive type motor for long life and low current operation. Available in 3”
and 4” sizes. D.C. blowers meet applicable sections of the U.S. Coast Guard
Electrical Regulations (Title 33, Chapter I, Part 183, Subpart I), and are listed
as B.I.A. type accepted.

ORDER NO. AIR FLOW CUCM/SEC. VOLT IN OUT PRICE ORDER NO. PRICE
ITT 351150020 105 49,600 12DC 3” 2-3/4” $107.14
ITT 347390010 150 70,800 12DC 3” 2-3/4” $171.00 VET UFO $79.75
ITT 354000000 250 118,000 12DC 4” 3-5/8” $231.41

VENTILATION 709

SCIROCCO Stainless Shell Ventilator Louvered Vent

The Vetus Scirocco can be screwed directly on Stamped 304 Stainless
to hull or superstructure. A plastic base plate, complete with water guard 1 per card.
and 3” hose connection is standard supply. The whole unit can be installed
both horizontally or vertically. The ideal solution
for ventilation openings to the engine room.
Free flow area: 6 sq. inch.

ORDER NO. PRICE ORDER NO. LENGTH WIDTH PRICE
VET SCIROCCO $45.00 $14.23
SDG 3314101 5” 9”

Louvered Vent – Oval Clam Shell Ventilator

Stamped 304 Stainless Chrome-Plated Brass

ORDER NO. LENGTH WIDTH PRICE

SDG 331405 9-1/8” 4-5/8” $13.95

Package 10. 1 per card.

Cowl Ventilator Surface Mount ORDER NO. DIMENSIONS HEIGHT WIDTH PRICE
OPENING OPENING
Can be used with any standard 3” ventilation hose. Neck extends 1-1/4” PER 0315DP1CHR
below deck. 4-11/16” wide x 6” long x 2-1/8” high. Installation hole diameter; PER 0315DP2CHR 1-5/8” x 1-1/2” 7/16” 7/8” $8.02
3-1/8”. This cowl ventilator comes with flexible hose flange attached. Vent is
die-cast ZAMAK with Perma-Plate chrome finish. 2” x 2” 9/16” 1-1/8” $11.30

ORDER NO. PRICE Deck Drain
ATT 1364A3 $30.36
Injection molded ABS. Black.
Clam Shell Vents Sold each.

• An economical alternative for metal ORDER NO. SIZE PRICE
clam shells SDG 3400201 4-3/16” $4.71
SDG 3400401 5-5/8” $6.01
• Molded plastic vents – UV and
weather resistant

Louver Ventilator

Chrome-Plated Brass

Package 10.
1 per card.

ORDER NO. COLOR SIZE PRICE ORDER NO. DIMENSIONS LENGTH PRICE
INCHES LOUVERS
THM CS1DP Black 9/16” x 1-7/8” $7.66 PER 033506ADP
THM CSS1DP Black 7/16” x 7/8” $7.32 PER 0335006DP INCHES
THM CS2DP White 9/16” x 1-7/8” $7.66
THM CSS2DP White 7/16” x 7/8” $7.32 7-1/2 x 3-1/2 3 $40.21

5-1/2 x 3 2 $35.84

Package 10. Stainless Steel Locker Vent
1 per card.
Midget Vents Stamped 304 Stainless.
Locker Ventilator 1 per card.
1 per card.
Chrome-Plated Brass

ORDER NO. O.D. PRICE ORDER NO. LENGTH WIDTH HEIGHT PRICE ORDER NO. LENGTH WIDTH PRICE
PER 0330DP1CHR 2-1/2” $7.52 SDG 3313601 1-5/8” 1-3/4” 1/2” $2.86 SDG 3316201 6-3/4” 2-3/8” $6.99
PER 0330DP2CHR 3-1/4” $11.29 SDG 3313701 2-1/4” 2-1/8” 5/8” $3.11

710 VENTILATION Plastic Flush Louvered Vent

Louvered Vent Canted louvers deflect rain and spray. Installs flush to hull. Drain
slots to prevent water accumulation. Requires 1341 collector
Measures 14” long, 5-3/4” high and 1” deep with 1/2”, flush height. box for 3” system, or 1342 for 4” system.
Cut out is 12-1/4” by 3-3/4” Dimensions: 2-3/4” H x 17-9/16” L x 1/4” D
Cutout: 15-7/16” x 2”

ORDER NO. COLOR PRICE

DET 721 White $16.29

Low Profile Louvered Vent

Measures 17” long, 3-1/8” high and 1”
deep with 15/16” flush height. Cut out is
15-1/2” by 2-1/4.

Bagged

ORDER NO. COLOR PRICE
$19.15
ATT 14255 White $16.62

ORDER NO. COLOR PRICE ATT 14235 Black

DET 725 White $15.79

ABS Slotted Ventilator-Five Louvered

Louvered Vent Injection molded ABS.

10-1/8” x 4-7/8”1 per card Measures 13-1/4” long, 4-3/4” high and 1-1/16” deep
with 9/16”, flush height. Cut out is 12-1/8” by 3-5/8”.

ORDER NO. DESCRIPTION PRICE
SDG 3374001 Black $7.42
SDG 3374011 White $7.96

Louver Ventilator

Chrome-plated brass

Package 10.
1 per card.

ORDER NO. DIMENSIONS LENGTH PRICE ORDER NO. COLOR PRICE
PER 033606ADP LOUVERS SDG 337290 White $7.75
SDG 337291 Black $7.75
6-3/8” x 4” 3” $44.59

VENTILATION 711

Stainless Steel Louvered Vent Plastic Louvered Vent

4 3/8” wide x 11 3/8” long x 3/4” high (7/8” neck). Installation hole size: Venturi vents feature a contemporary horizontal louver design that
3 1/4” x 10 1/4”. Predrilled with six mounting holes to accommodate adds a clean look to any boat. These patented vents are sized for easy
#8 screws. Louvered vent is made from 304 stainless steel with highly installation, even on highly-contoured decks. ABS plastic construction
polished finish. All-welded construction. will not corrode or discolor. At time of installation, black (1494A) or
Adapts to 3” or 4” ventilation systems. white (1494F) vent can be painted to match boat gelcoat. Paint must be
suitable for ABS plastic. Above-deck dimensions: 2-3/4” wide X 17-9/16”
long X 11/16” high.

ORDER NO. PRICE ORDER NO. COLOR PRICE
ATT 14885 $51.32 ATT 1494F1 White $14.41
ATT 1494A5 Black $23.33

Plastic Louvered Vent Louvered 8 Slot Vent

Made from rugged ABS plastic, will not rust or corrode, discolor or streak. Stamped 316 Stainless
No dangerous sharp edges to scratch or cut hands or feet. Designed for
gunwale mounting to assure high vent mounting so that the boat will meet
and pass the tip test. 3-7/16” wide x 17-7/8” long x 7/8” high (1” neck).
Installation hole size: 2-1/4” x 16-1/8”. Predrilled with six mounting holes
to accommodate #8 screws. Fits 1345 collector box.

ORDER NO. LOUVERS CUTOUT SIZE OVERALL SIZE PRICE
SDG 331200 8 1-7/8”X15-1/2” 2-7/8”x16-1/2” $24.09

Stainless Steel Slotted Ventilators

ORDER NO. COLOR PRICE

ATT 14951 Off White $17.59 ORDER NO. LOUVERS LENGTH WIDTH PRICE

ATT 1495A1 Black $17.76 SDG 331280 10 20” 4-3/8” $59.93

ATT 1495B5 Chrome $42.57 SDG 3312903 5 12-3/4” 4-3/8” $28.09

SDG 331300 3 8-1/4” 4-3/8” $18.99

Collector Boxes

ORDER NO. FOR USE WITH DEPTH INSTAL. HOLE SIZE PRICE Quick Release Deck Plates
ATT 13411 Two 3” I.D. Hoses 3-7/8” 2-1/16” x 15-9/16” $12.06
ATT 13421 One 4” I.D. Hoses 2-1/8” x 15-5/8” $18.91 • Cam latch holds secure
ATT 13451 Two 3” I.D. Hoses 5” 2-7/16” x 16-1/4” $14.01 • Hidden Fasteners in ring
4” • Easy to open and close
• Textured white finish

ORDER NO. DESCRIPTION PRICE

THM DPCAM62DP 6” Diameter $22.70

THM DPCAM82DP 8” Diameter $30.42

712 VENTILATION Screw Out Deck Plate

Screw out Deck plate Polypropylene - White
Molded to the highest standards using top quality UV stabilizers and
ORDER NO. INSIDE COLOR PRICE antioxidants. Installs on hull or deck surface using silicone sealant.
SDG 3371401 4” White $15.21
SDG 3371451 4” Black $14.42 ORDER NO. SIZE PRICE
SDG 3371501 5” White $15.73
SDG 3371551 5” Black $14.63 SDG 3357401 4-1/2” $8.45
SDG 3371601 6” White $20.95
SDG 3371651 6” Black $19.76 SDG 3357601 6-1/2” $13.45

Sure-Seal™ Deck Plates Diamond Pattern Non-Skid

Features a fully overlapping lid and a positive “O” ring seal Screw-Out Deck Plates with O-Rings
insuring a watertight fit. All lids are textured for beauty.
•Watertight - lid overlapping flange Lower torque on close, higher torque to open, so
•Positive O-ring seal deck plates always open with ease. Color - White
•No visible mounting fasteners
•Total UV & chemical stability ORDER NO. ID OD HOLE CUT PRICE
•Requires no tools for opening BEC DP44W 4” 6-1/8” 4-1/2” $16.04
•Polar White BEC DP64W 6” 8-1/8” 6-1/2” $24.09
BEC DP84W 7-5/8”
10” 8-1/2” $34.81

ORDER NO. DIAMETER PRICE Deck Plates with O-Rings

Screw-Out Single start non-jamming
extra strong buttress
THM DPS42DP 4” $9.32 thread design eliminates
THM DPS62DP 6” $13.14 jamming problems of
THM DPS82DP 8” $26.95 multistart or fine thread
deck plates. Screw out plates with watertight O-Ring are recommended
for use where internal pressure (oil canning) may occur.

Pry-Out ORDER NO. SIZE DESCRIPTION PRICE
6”
THM DPP62DP 8” $13.06 BEC DP40W 4” White Deckplate, Screw Out Center $16.04
THM DPP82DP $26.95
BEC DP40WC 4” White Deckplate, Screw Out Clear Center $20.15

BEC DP40B 4” Black Deckplate, Screw Out Center $16.04

Screw Out Deck Plate W/ BEC DP60W 6” White Deckplate, Screw Out Center $22.65

Clear Cover & Internal Collar BEC DP60WC 6” White Deckplate, Screw Out Clear Center $27.17

Injection Molded ABS - White BEC DP62W 6” White Deckplate, Screw Out Non-Skid Center $22.65
Allows visual inspection of watertight compartments, storage
lockers and fuel fittings without removing the lid. Installs BEC DP80W 8” White Deckplate, Screw Out Center $34.81
on hull or deck surface using silicone sealant.
BEC DP80WC 8” White Deckplate, Screw Out Clear Center $39.33

ORDER NO. SIZE PRICE Pry out deck plates have an extra heavy O-Ring design, and
SDG 337163 6-1/2” $20.65 provide a flush surface.

5” Twist-Out Deck Plate ORDER NO. SIZE DESCRIPTION PRICE
BEC DP61W 6” White Deckplate, Pry Out Center $23.81
Designed to conceal its mounting fasteners under the quick BEC DP63W 6” White Deckplate, Pry Out Non Skid Center $23.81
twist cover. The low profile cover is self-centering, and BEC DP81W 8” White Deckplate, Pry Out Center $37.30
quickly locks in place with a 1/8 twist. Three BEC DP83W 8” White Deckplate, Pry Out Non Skid Center $37.30
separate sealing areas assure a watertight
closure. The bayonet threads are non-jamming, BEC DP85W 8” White Deckplate, Pry Out $37.30
self-cleaning and lift the center for easy removal. Diamond Non-Skid Center

ORDER NO. PRICE Screw Down Deck Plate

BEC DP50W $17.81 This screw down deck plate is an inexpensive
alternative to screw out or pop out plates where
quick access is not necessary. Molded of super tough poly to be extra
strong with an attractive matte finish. Mounts easily
with countersunk screws. Off White.

Deck Plates ORDER NO. DIAMETER PRICE
Replacement O-Rings THM SDP1WDP 5-5/8” $8.36

ORDER NO. DESCRIPTION PRICE Drain Cover Low Profile Twist-Out Deck Plates
BEC D4SG Screw out 4” $2.67
BEC D6SG Screw out 6” $3.28 Stamped 304 Stainless • Quick twist-out lid – Fast Access
BEC D8SG Screw out 8” $4.38 • Smooth low-profile lid – Overlaps frame
BEC D5SG Twist out 5” $3.00 ORDER NO. SIZE PRICE • Hidden fasteners provide smooth look
BEC D6PG Pry out 6” $4.48 SDG 3316001 3-1/4” $4.01 • “O” Ring for watertight design
BEC D8PG Pry out 8” $5.00
ORDER NO. SIZE PRICE
THM DPSLP42DP 4” $12.19
THM DPSLP62DP 6” $17.28

Parts for Cast Hatches VENTILATION 713

Parts for Extruded Hatches

ORDER NO. DESCRIPTION PICTURE PRICE ORDER NO. DESCRIPTION PICTURE PRICE
$30.99 POM P2000267 Hi-Profile hatch gasket 7ft. F $37.99
POM P100527 9/16” gasket 7ft. D $63.00 POM P2000257 Lo-Profile hatch gasket 7ft. G $37.99
F $63.00 POM P200027 Mushroom cap for (Q) & (R) N $9.80
POM P10019 Quick action tie down dog for E $13.00 POM P200052 Q $34.00
cast hatches right $13.00 POM P200053 Left extruded hatch dog R $34.00
$13.00 Right extruded hatch dog
POM P10018 Quick action tie down dog for cast hatches left

POM P10006 Male knob (5/16”) H

POM P10008 Female knob (5/16”) J

POM P10007 Female knob (3/8”) K

Low Profile 1000 Series Hatches

• Anodized heavy-duty aluminum frames
• Vent position
• Heavy-duty acrylic top
• Quick acting tie down dogs
• Sun shade available

ORDER NO. HATCH OPENING HOLE CUT-OUT O.D. DECK FLANGE PRICE
POM N100010A 9-5/8” x 9-5/8” 10-3/4” x 10-3/4” 12-3/8” x 12-3/8” $405.07
POM N107010A 16-1/2” x 16-1/2”
15-7/16” x 15-7/16” 18-3/16” x 18-3/16” $529.56

POM N103910A 19-1/8 “ x 19-1/8” 20-1/4” x 20-1/4” 21-7/8” x 21-7/8” $604.93

Trim Rings and Screens Altus Escape Hatch 20” x 20”

**Note: The trim ring is required to use the screen. This hatch features a sturdy aluminum profile which is only 13/16”
high. They are designed for ocean use and can be fitted on deck.
These hatches are provided with carefully designed hatch adjusters,
which are both stylish and easy to operate. They can be opened
from inside or outside the boat. They can also be left locked; either
completely watertight or in a ventilation position. The frame is satin
finished and anodized. The acrylic has a thickness of 10 mm and the
color is “dark smoke”.

ORDER NO. DESCRIPTION FITS HATCH PRICE ORDER NO. PRICE
POM NS2070 Screen N1070-10A $55.00 VET ALTUS5151G $495.00
POM NS2039 Screen N1039-10A $65.00
POM NS2000 Screen N1000-10A $46.00
POM NT2070 N1070-10A $56.00
POM NT2039 Trim Ring N1039-10A $65.00
POM NT2000 Trim Ring N1000-10A $70.00
Trim Ring

714 VENTILATION

Designer Series™Access Hatches

•Cam Style Locks hold Lid Securely
•Positive Lid Seal for Water Tight Fit
•Hidden Fasteners in Frame
•Stainless Steel Hinges allow Full 180 Degree opening
•Structurally Engineered “Walk On” Lids
•Vertical or Horizontal
•Polar White

ORDER NO. OUTSIDE INSIDE CUT-OUT PRICE
THM HDS13242DP 12-7/8” x 23-1/4” 9-5/8” x 20-1/2” 10-1/8” x 21-1/8” $139.53
THM HDS11152DP 7-5/8” x 11-5/8” 8-1/4” x 12-1/8” $110.99
THM HDS13302DP 11” x 15” 9-5/8” x 26-3/8” $189.80
12-7/8” x 29-3/4” 10-1/8” x 27”

Sure Seal™ Hatches Rain Drain™ Opening Ports

• Watertight – lid overlapping frame Inside frame dimension: 5-1/2” x 12-1/2” (Hole
• Two separate seals on frame and lid size) Outside frame dimension: 7-3/4” x
• No visible fasteners 14-5/8”, 2” spigot provided.
• Corrosion free integrated hinge
• Hinges allow 180 degree opening
• Color: polar white

ORDER NO. SIZE PRICE ORDER NO. SIZE DESCRIPTION PRICE
THM HAT11152 11” x 15” $113.78 $197.84
THM HAT13242 13” x 24” $184.69 BEC PO512DWC20 5x12 White body, clear window
THM HAT13302 13” x 30” $211.02

Low Profile Hatch Inside frame dimension: 7-1/2” x 14-3/8”
(Hole size). Outside frame dimension: 9-3/4” x
The curved upper frame profile provides soft fluid styling and adds 16-3/4”, 2” spigot provided.
strength. Improved friction lever performance has resulted in fewer
friction levers being required on larger hatches to hold the lid open, ORDER NO. SIZE DESCRIPTION PRICE
increasing visibility through the hatch. Improved stronger lower frame $231.45
design with higher breakwater. The cut out in the deck is to Lewmar’s BEC PO714DWC20 7 x 14 White body, clear window
standard sizes. All Low Profile Hatches have lids which open to 180% and
are self supporting to around 90%. For applications where additional
support or restricted opening is required, such as on power boats, the Low
Profile Hatch can be supplied with a stay fitted. The stay is also available
as a retro-fit item.

Rectangular Hatches

• Easy to install
• 180° opening
• UV resistant material
• Weather-tight seal
• Mount vertical or horizontal

LEW 39960030 LEW 360918999

LENGTH WIDTH CUT-OUT CUT-OUT BEC HT1424W
22-11/16” 22-11/16” LENGTH WIDTH

19-15/16” 19-15/16”

BEC HT1115W

ORDER NO. DESCRIPTION PRICE ORDER NO. DESCRIPTION PRICE
BEC HT1115W Small O.D. 11” x 15” $124.44
LEW 39960030 20” x 20” Hatch $638.80 BEC HT1424W Large O.D. 14” x 24” $187.36
LEW 360918999 Optional Stay Lift $59.50

1115 and 1323 Slam Hatch VENTILATION 715

The Access Slam Hatch is made from a glass filled polypropylene, for strength Nicro
and durability. Designed for heavy traffic areas, and will withstand people
walking or standing upon them. Features an easy close slam latch that forms 3” White MiniVent 1000
a weather tight seal just by closing the hatch. Access Hatches also utilize a
patented integral hinge assembly that allows for easy lid removal. The beveled The MiniVent 1000 is the smallest and most economical solar vent
and skirted lid covers all fasteners in the Nicro line. Fits a 3 3/4” installation hole.
for a clean look above or • Solar powered exhaust ventilation during daylight – passive
below decks. The perfect
choice for easy dry storage, exhaust at night.
access to bait or fish wells, • No batteries or wiring required.
or electrical and plumbing • Whisper-quiet fan operation.
lines. White. • Durable white ABS construction.
Requires #12 Pan Head self tapping • Shut – off damper to prevent water intrusion in rough seas.
screws. • Mounting hardware included.
• Dimensions: 7” diameter x 2” high.

ORDER NO. MODEL CUTOUT INSIDE OUTSIDE PRICE ORDER NO. PRICE
BMM 44230 1115 8-5/8” x 12-1/2” $60.17 AFI N20020 $167.50
BMM 44430 1323 10-3/4” x 20-3/4” 7-1/4” x 11-1/4” 10-3/4” x 15-1/8”
$102.67
9-3/8” x 19-1/2” 13” x 23-1/4”

Stainless Steel Series Gas Springs Nicro

The pressure tube and rod is super-tough #316 stainless steel alloy. All other exposed Day/Night Plus Vent
components are stainless steel or marine-grade composite. This hardware is the best
choice for saltwater use—and any other application where good looks and quality really Stainless Steel
matter. They’re the best springs you can buy for livewells, line lockers, deck hatches, and
other moisture-prone areas. End fitting type = 10mm socket composite. Product Features:
• Circulates fresh air in boat cabin eliminating
ORDER NO. LENGTH LENGTH OUTPUT LENGTH PRICE
mold, mildew and musty air
EXTENDED COMPRESSED FORCE STROKE • Moves 1,000 cubic feet of air/hour or

8X18 - 8MM ROD X 18MM CYLINDER 24,000 cubic feet of air/day (4” model)
• Rechargeable battery allows for 24-hour
ATT ST31205 7.5” 5.25” 20 LBS. 2.25” $48.96
ATT ST30405 $51.17 continuous operation
ATT ST35405 10” 7” 40 LBS. 3” $55.79 • Whisper quiet fan operation
ATT ST33405 $55.86 • No wiring required
ATT ST34405 12.04” 8.48” 40 LBS. 3.58” $65.04 • High capacity NiMh battery operates
ATT ST34605 $65.04
ATT ST34905 15” 9.5” 40 LBS. 5.5” $65.04 vent for up to 40 hours without sunlight
ATT ST341205 $65.04 on a full charge
ATT ST36605 20” 12” 40 LBS. 8” $62.66 • 2 year limited warranty
• All mounting hardware, interior trim
20” 12” 60 LBS. 8” ring, and insect screen included
• Direct to deck installation
20” 12” 90 LBS. 8” • 3” and 4” models are available to fit any deck
or hatch installation
• All Day/Night PLUS models come
complete with two fan blades, white
plastic interior trim ring, insect screen,
mounting hardware and an
easy-to-understand installation manual.

20” 12” 120 LBS. 8”

17.2” 10.2” 60 LBS. 7”

Bracket Mounting Systems

Stainless steel bracket.
Forward pem ball.

SL40

ORDER NO. DESCRIPTION PRICE SL50 ORDER NO. SIZE PRICE
ATT SL40SSP37 Flat Bracket $8.27 MAR N20703S 3” $259.68
ATT SL50SSP37 90° Bracket $8.47 MAR N20704S 4” $259.68

716 VENTILATION

Nautalift™ Gas Lift Supports and Accessories

• Marine grade gas filled lift supports
• Annealed steel rods, nitride coated for corrosion resistance
• Engineered polymer rod ends
• Multi-lobe internal seal

Exact fit OEM replacement – used by
leading boat builders for over 20 years.

ORDER NO. EXTENDED COMPRESSED RATED PRICE
LENGTH (INCHES) LENGTH (INCHES) (POUNDS)
SIE GS62600 $29.00
SIE GS62640 7.5 5.5 20 $29.00
SIE GS62670 10 7 40 $29.00
SIE GS62690 12 8.5 30 $29.00
SIE GS62700 15 9.5 30 $29.00
SIE GS62740 15 9.5 40 $29.00
SIE GS62750 17 11 40 $29.00
SIE GS62760 17 11 60 $29.00
SIE GS62790 17 11 90 $29.00
SIE GS62800 20 12 40 $29.00
SIE GS62820 20 12 60 $29.00
SIE GS62830 20 12 90 $30.71
20 12 120

Stainless Steel Version

316L Stainless Rod and Cylinder

ORDER NO. EXTENDED LENGTH COMPRESSED LENGTH RATED PRICE
(INCHES) (INCHES) (POUNDS)
SIE GSS62600 $59.85
SIE GSS62630 7.5 5.5 20 $59.85
SIE GSS62680 10 7 20 $59.85
SIE GSS62710 15 9.5 20 $59.85
SIE GSS62800 15 9.5 60 $60.72
SIE GSS62830 20 12 60 $66.71
20 12 120

GS62850 GS62870

Stainless steel flat bracket with Stainless steel 90˚ angle bracket
10mm ball stud. 2.25” wide. with 10mm ball stud. 2” wide,
.65” base.
ORDER NO. PRICE ORDER NO.
SIE GS62870 PRICE
SIE GS62850 $14.72
$18.14

GS62900 GS62920

Stainless steel 90˚ angle Stainless steel 10mm ball
bracket with 10mm ball stud with threaded shaft.
stud. 2” x 1.2” base.

ORDER NO. PRICE ORDER NO. PRICE

SIE GS62900 $19.72 SIE GS62920 $17.00

Hatch Lifts 1200S The Hatch lifts are designed specifically to meet the demands
of the marine environment. They are constructed entirely of
Based on a ball screw design, Lenco’s noncorrosive materials and are completely submersible, ensuring
Hatch Lifts open and close bulky hatches reliable performance. Unlike hydraulic models, Lenco’s lifts install
without slipping. The fast and powerful in line motor easily with a single power cable. An optional non-locking slide
delivers up to 500 pounds (226.79 kg) of thrust while bracket allows easy access to the mounting bracket should any
drawing only 5 amps. To raise or lower a hatch, boaters problem arise preventing operation of the lift.
simply use a rocker switch.

ORDER NO. DESCRIPTION PRICE MODEL NO. RETRACTED APPROX. EXTENDED
LEN 20768001 12” Hatch Lift $426.00 LENGTH STROKE LENGTH
LEN 20774001 16” Hatch Lift $473.00 OVERALL
LEN 20778001 20” Hatch Lift $515.00 OVERALLL
LEN 20782001 24” Hatch Lift $559.00
LEN 70381001 Optional SS. Slide Bracket HL-1200S 25” 12” 37”
LEN 15096001 Single Rocker Switch $59.75 15096001
$60.00 20774-001 27” 16” 43”

HL-2000S 33” 20” 53”

HSLB 20782-001 35” 24” 59”

DRAINS, THRU-HULLS, VALVES 717

Snap-Tite® Bailer Plug Snap Handle Drain Plug

Stamped brass.

ORDER NO. DESCRIPTION PRICE

All brass with neoprene seal SDG 5200701 Plug Diameter 1” $5.42

ORDER NO. PACKAGING SPECIAL FEATURE SIZE PRICE SDG 5200711 Plug Diameter 1” $7.13
(w/safety chain)
MOE 2900010 Skin-Pack Plug Only Fits 1” Drain Tube $8.56

MOE 29000001 Bulk-Pack Plug Only Fits 1” Drain Tube $5.50 SDG 5200705 Display 25 $118.18

MOE 29055001 Bulk-Pack Plug Only Fits 1-1/4” Drain Tube $6.13

MOE 2900050 Bulk-Pack 50 Pc. Display Fits 1” Drain Tube $276.78 T-Handle Drain Plug

All aluminum with neoprene seal Stamped brass.

ORDER NO. PACKAGING SPECIAL SIZE PRICE ORDER NO. DESCRIPTION PRICE
FEATURE
SDG 5200801 Plug Diameter 1” $4.82
MOE 2907010 skin-pack Plug only Fits 1” drain tube $4.87
SDG 5200805 Display 30 $135.21

Turn-Tite® Bailer Plug

All brass with neoprene seal

ORDER NO. PACKAGING SPECIAL SIZE PRICE
FEATURE

MOE 20899001 Bulk Plug Only Fits 1” Drain Tube $4.13

MOE 2089910 Skin-Pack Plug Only Fits 1” Drain Tube $5.79

MOE 20883001 Bulk Plug Only Fits 1-1/4” Drain Tube $5.12

MOE 2089950 Bulk 50 Pc. Display Fits 1” Drain Tube $212.87

All aluminum with neoprene seal

ORDER NO. PACKAGING SPECIAL SIZE PRICE
FEATURE

MOE 20895001 Bulk Plug only Fits 1” drain tube $3.77

Deck and Baitwell Plugs Drain Tubes,
Brass
For livewells or baitwells. Cam-action plug snaps into leak-proof, non-slip
position. Available in various sizes to fit all I.D. openings in through-hull
fittings. Stopper is adjustable, brass cam; stainless steel top & bottom plate;
neoprene body.
1 per skin pack.

ORDER NO. SIZE PRICE Functions as drain for transom,
MOE 5100310 fits 1/2” I.D. $4.95 motorwell, livewell or baitwell.
MOE 5100510 fits 5/8” I.D. $5.20
MOE 5100610 fits 11/16” I.D. $5.13
MOE 5100710 fits 3/4” I.D. $5.12
MOE 5100910 fits 7/8” I.D. $5.49

Flanging Tools

Baitwell Plugs ORDER NO. SIZE PRICE
MOE 2070000 1” $46.71
ORDER NO. SIZE CTN. PRICE MOE 2070400 1-1/4” $46.71
SDG 5200911 3/8” 10 $5.22
SDG 5200921 1/2” 10 $5.52 ORDER NO. PRICE Size & Length Stock #
SDG 5200931 5/8” 10 $5.82 Under Flange
SDG 5200941 3/4” 10 $6.46
SDG 5200951 7/8” 10 $6.26 MOE 21003188 $4.62 1” O.D. x 1-7/8” 21003-188D
MOE 21003300 $6.46
Brass/Neoprene 1” O.D. x 3” 21003-300D
2 per card
MOE 21253300 $8.67 1-1/4” O.D. x 3” 21253-300D

MOE 210031400 $21.79 1” O.D. x 14” 21003-1400

718 DRAINS, THRU-HULLS, VALVES

StaPlug® Automatic Drain Plug

Forespar’s® StaPlug® is an award winning damage control tool. It is • Flapper will automatically allow for water to
a tapered circular cone shaped plug about 9” tall and 4.75” across at drain from the hull when boat is under way
the base made of foam that is a spongy but firm cellular material and
is coated with a flexible sealer adding strength and color. Ridged edge • Water tight seal when boat is at a stop
helps hold plug in place. • Flexible neoprene plug inserts in the transom

StaPlug is used as a temporary or emergency plug in boating drain hole
applications where water would enter a circular, oval, or irregular hole • Fits 1” standard diameter
caused by emergency mechanical failure or hull breach due to impact.
StaPlug will stand up to diesel fuel and engine oil. drains with up to 2-1/4” thick
transoms
• StaPlug® is a compressed by hand and inserted into the hole
stopping or reducing the inward flow of water as the float ORDER NO. PRICE
returns to its original shape. MOE 05101110 $22.93

• StaPlug® can also be cut with a razor knife Transom Drain Plug
and forced into elongated openings using a
putty knife or similar tool. Fits flush to boats transom or exterior, allowing
water to drain when boat is trailered to prevent
• StaPlug® can be inserted into the ends of moisture build-up and rot damage. Celcon pipe
broken pipes by twist compressing before plug has screwdriver slot. Natural color nylon
inserting and will need to be held in place. tube won’t bend, rot, or mildew. Three recessed
holes allow riveting into transom, or can be
ORDER NO. PRICE secured with #8 fasteners. Rubber O-ring makes
FRS 150110 $19.96 the unit water tight.

Motorwell Drain

Injection molded nylon.

Length 2-3/4”
Fits 1-1/8” hole
Plug dia. 1”

ORDER NO. PRICE
SDG 5203251 $5.50

Drain Tube ORDER NO. SPECIAL FEATURE PRICE
MOE 2030310 Tube & Plug with “O” ring $7.93
Injection molded HDPE MOE 2030410 Plug with O-ring 5 per poly bag $8.77

Adjusts 3/4” to 2-1/2”
Fits 1” dia. hole

ORDER NO. PRICE

SDG 5203201 $3.27 Drain Tube

Formed brass.

Motorwell Drain Tube ORDER NO. LENGTH PRICE
SDG 5202101 1” x 1-7/8” $5.01
Durable plastic drain for motorwell, SDG 5202301 1” x 2-7/8” $5.70
livewell or baitwell. Concentric rings
snap-lock in place for tight leak-proof
seal. Won’t rot, bend or mildew. Seals
1” dia. opening 3/4” to 2-1/2” long.

ORDER NO. SIZE PRICE

MOE 2030010 11/16” tube I.D. $4.58 Garboard Drain and Plug

Note: Deck & Baitwell Plug #51006-10 seals opening in Motorwell Tube. Injection Molded nylon/acetel.
2-13/16” in length.

Garboard Drain & Plug ORDER NO. DESCRIPTION PRICE
SDG 5200501 Complete Assembly $5.49
Injected molded nylon. SDG 5200511 Replacement Plug $4.25

ORDER NO. SIZE PRICE
SDG 5200551 2-3/16” $6.52

REPLACEMENT PLUG
SDG 5200511 1/2” $4.25

Garboard Drain Plugs DRAINS, THRU-HULLS, VALVES 719

Pressure cast bronze. Drain Plug
No 2 style spare plug has stainless steel pin.
1/2” Pipe size Designed to fit securely in a 1” hole without
2” OD the use of fasteners. The ridges on the body
of the Drain Plug are designed to keep the
plug in place. Sealant should be applied prior
to installation to make a watertight seal.

ORDER NO. DESCRIPTION PRICE 714 #2 ORDER NO. DESCRIPTION PRICE
PER 0714DP1PLB Assembly $38.90 SDG 5200301 Complete Assembly $4.16
PER 0742DP1 Spare plug $20.78 SDG 5200211 Replacement Plug & Gasket $4.25
PER 0742DP2 $28.54
Spare plug w/ pin

Bronze Garboard Plug Drain Plug

Sold each. This Drain Plug is designed with a molded-in recess
in the base, thus trapping the sealant in place and
providing a more water-tight seal.

ORDER NO. DESCRIPTION FLANGE DIA. CTN. PRICE

SDG 5200401 1/2” Pipe Size 2” 10 $12.19 ORDER NO. DESCRIPTION PRICE
SDG 5200101 Complete Assembly $3.84
SDG 5200411 Replacement Plug N/A 10 $5.95 SDG 5200211 Replacement Plug & Gasket $4.25

SDG 5200415 Replacement Plug (Pk-30) N/A Display $169.32

Garboard Drain & Plug Captive Garboard Drain & Plug

Die cast bronze. Investment Cast 316 Stainless
The Captive Garboard Drain & Plug is a direct replacement for the
traditional style Sea-Dog Line bronze Garboards, part numbers 5200401
and 5200421. Captive plug means no more lost plug.
1/2” Pipe size, 2” Flange Dia.

ORDER NO. DESCRIPTION FLANGE DIA. CTN PRICE ORDER NO. PRICE
SDG 5200421 10 $13.75 SDG 5200601 $21.94
SDG 5200431 1/2” Pipe Size 2” 10
$8.22 Garboard Drain Plug
Replacement Plug — Cast Bronze 1/2” NPT

Plugmate™ Garboard Wrench Provides bilge drainage when hauling out. Nut
removes with wrench or pliers. Machined, tapered
Injection Molded Polypropylene Fiberglass pipe threads ensure watertight plug fit. 3/8” neck
The PlugMate™ garboard wrench will fit most depth. Three countersunk holes for #8 screws.
standard and “T” style garboard plugs.
In addition, the PlugMate has various
deck plate keys and shackle key.

ORDER NO. PRICE ORDER NO. PRICE
SDG 5200451 $13.19 ATT 75553 $14.94

720 DRAINS, THRU-HULLS, VALVES

Bronze Drain Plug - Flange Style Self-Retaining Boat Transom Drain Plug

Complete w/ hex plug - Sold complete This screw-type drain plug is constructed of black
polypropylene and features a chemically inert “O” ring for
Plug Size (N.P.T) 1/2 in positive sealing. This drain plug mounts in a 1” diameter hole.
Hub Length Under Flange 7/8 in Mounting flange is approximately 1-1/2” x 2”.
Flange Diameter 2-5/8 in
Screw Size #8 This drain plug is ideal for boat transoms, fish wells, bait
tanks, water tanks, coolers, ice chests or almost any
application where a positive sealing drain plug is required.
This retained plug will not get lost.

Color: Black

ORDER NO. PRICE

BUC SIGARPLUG5 $47.88

ORDER NO. PRICE

THM DP1DP $7.75

Bronze Drain Plug -

Flange Style with Bronze Plug & Wrench

Complete w/ bronze plug & wrench - Sold complete Replacement Marelon Garboard

Plug Size (N.P.T.) 1 in Drain Flange & Plug

Hub Length Under Flange 7/8 in • Direct Replacement for OEM Bronze Drain Plugs, Size: 2” Round OD

Flange Diameter 3-1/8 in

Screw Size #8

ORDER NO. COLOR PRICE
FRS 906091 Black $8.95
FRS 906092 White $8.95

ORDER NO. PRICE

BUC DP100 $57.33

Bronze Drain Plug - Flange Style Brass Square Head Plug I.P.S.
Complete w/ T-Handle
Use for garboard drain plug.

ORDER NO. I.P.S. PRICE
MDL 28087 1/2” $3.69

Inline Scupper

• Prevents Backwash
• Chemical Resistant Materials
• Thermo-Plastic Flapper

ORDER NO. DESCRIPTION PRICE ORDER NO. HOSE SIZE PRICE
BUC DP105TS Complete Set 3/4” $35.62 THM ILS750DP 3/4” $22.61
BUC DP84T Complete Set 1/2” $41.52 THM ILS1200DP 1-1/8” $22.61
BUC DP105TH Replacement T-Handle plug 3/4” $24.64 THM ILS1500DP 1-1/2” $22.61
BUC DP84TH Replacement T-Handle Plug 1/2” $14.09

DRAINS, THRU-HULLS, VALVES 721

Scupper Thru-Hull Scupper

Mount on the transom, slightly above the boat’s water line. The rubber Molded white plastic soft black flapper valve.
flapper valve opens outward to allow water out of the boat when Fig. 323 Complete with nut and mounting hardware.
necessary, but seals back to prevent water For mounting through the transom.
from entering the boat.
For boats with self bailing ORDER NO. HOSE HULL THICKNESS O.D. PRICE
cockpits.
Diameter: 2-7/8” PER 0323DP 1-1/2” 2-1/8” 2-7/8” $44.69

ORDER NO. PRICE Flapper Scupper
Repair Kit
ATT 38761 $10.92
• Repairs Most Scuppers
Scupper Valve Assembly • Kit Contains: 2 each 1” -1-1/2” & 2” Flappers

Molded white plastic soft black flapper valve. Keepers and Stainless Fasteners

ORDER NO. O.D. PRICE ORDER NO. PRICE
PER 0365DP 2-7/8” $18.11
THM FSRK1DP $14.88

Scupper Valve Flow-Max™ Ball Scupper

Sold each. Tired of scupper leakage? Replace your old worn-
out flapper scupper with this positive sealing ball scupper. Easy twist-off
ORDER NO. OUTSIDE INSIDE FAST STD. PRICE design makes cleaning debris a snap. Simply twist to remove ball cavity,
PACK clean out and twist back on. Stainless steel security pin provided for
added safety. Larger exit hole allows 70% more water drainage than its
nearest competitor. Multiple mounting holes make retrofits quick and
easy—no filling holes or re-drilling. Neutral
buoyancy ball insures ball won’t
float up and break seal. Meets all
ABYC standards.

SDG 5205001 2-3/4” 1-3/4” #6 FH 10 $5.53 ORDER NO. PRICE
THM FMS10DP $17.33

Scupper Valve Large Rectangular Scupper

Injection molded nylon/neoprene • Quickly drains decks
Overall dimensions: • For decks above waterline
6”L x 2-1/4” H x 2-1/8” D • Maximum drainage for larger boats
• Easily clears debris
ORDER NO. CTN. PRICE • Fits 2” x 5-1/2” hole
SDG 5205251 10 $23.96 • White

ORDER NO. PRICE
THM LRS2DP $13.19

“Pumpgard” In-line Strainer Flex Flange
Thru-Hull Drain
Pumpgard prevents dirt and other particles from entering pump intake
allowing pump to run cleaner and longer. Works in any position, just •Unique Flexible Flange
remove one screw for inplace cleaning. Transparent housing for quick •Allows Near Total Drainage
inspection. 50 mesh stainless steel filtering screen. •1-1/2” Hose Barb TH-1502FF Flex Flange Drain – 1-1/2”
•Easily Connects to Scuppers

ORDER NO. PRICE

THM TH1502FFDP $11.88

464000002 364001000 All Purpose Drains/

ORDER NO. DESCRIPTION PRICE Hatch Drains
ITT 464000002 1/2’’ Hose $25.94
ITT 364001000 1/2’’ Threads $27.32 • Low Profile Flat Head for Complete Drainage
• Requires 1-3/8” Hole

ORDER NO. DESCRIPTION PRICE
THM APD2DP Straight $4.04
THM APD290DP $5.89
90 Degree

722 DRAINS, THRU-HULLS, VALVES

Intake Water Strainers ARG Series Strainers

Perko water strainers are designed for easy installation and cleaning. • Improved Sealing.
Features include mounting lugs cast into both sides to assure universal • Improved filter basket.
mounting, four outside tie rods and a 304 stainless steel strainer basket • Improved mount system.
to minimize electrolysis. Hinged lugs for the cast bronze cover permit • Plastic filter basket
easy removal and cleaning of the strainer basket. A drain plug in the • Improved design secures basket.
bottom casting is provided for easily removing sediment and draining for • No tie rods or gaskets.
winterizing. • O-rings seal all mating surfaces.
• Easy service with screw-on cap.
STANDARD PIPE HEIGHT WIDTH DIMENSIONS • Mounting hardware is included.
PKG.-1 PC. SIZE OVERALL OVERALL CYLINDER • Bonding connection.
ORDER NO.
PER 0493004PLB INCHES INCHES INCHES INCHES PRICE ORDER NO. PIPE SIZE HEIGHT WIDTH PRICE
PER 0493005PLB OVERALL OVERALL
PER 0493006PLB 1/2 5-3/4 4-1/2 3-1/2 x 4 $331.25 GRC ARG500P 1/2” $169.00
PER 0493007PLB $358.41 GRC ARG750P 3/4” 6.38” 4.5” $175.00
PER 0493008PLB 3/4 8-3/8 4-1/2 3-1/2 x 6 $501.23 GRC ARG1000P 1” 8.38” 4.5” $246.00
PER 0493009PLB $506.33 GRC ARG1250P 1-1/4” 5.75” $264.00
1 9-1/2 5-1/2 4-1/2 x 5-1/2 $798.16 GRC ARG1500P 1-1/2” 9” 5.75” $406.00
$990.18 GRC ARG2000P 2” 10.63” 7.25” $433.00
1-1/4 10 5-1/2 4-1/2 x 6 11.38” 7.25”

1-1/2 11-1/2 7-1/4 6x8 14”

2 16 7-1/2 2 x 12

Cork Gasket Kit – SA Series Raw
1 cover gasket and 2 cylinder gaskets
Water Strainer
ORDER NO. DESCRIPTION PRICE
PER 0493DP599M 4-5 Gasket Kit $22.05 • Monel filter basket.
PER 0493DP799M 6-7 Gasket Kit $26.58 • Monel inside tie rod.
PER 0493DP999M 8-9 Gasket Kit $38.24 • Easy Service with spin-off wingnut.
• Improved filter basket handle.

To obtain spare part no., insert spare ORDER NO. PIPE SIZE HEIGHT WIDTH PRICE
Part Code listed below in place of the OVERALL OVERALL
“PLB” in the Strainer’s Catalog Number. Example: PER49300799C is a GRC SA750 3/4” $300.00
cylinder for 1-1/4” strainer. GRC SA1000 1” 9.63” 4” $375.00
Transparent cylinder – 99C GRC SA1250 1-1/4” $442.00
Basket strainer – 99D 10.5” 5”
Bronze top cover – 99E
Hinge bolt package – 99L 12.75” 5”
Rubber gasket kit – 99R (for units manufactured after May 1996.)
Sight Glass’ for Strainers

Flushing Strainer ORDER NO. DESCRIPTION PRICE
GRC ARG1003 For ARG-1000 $71.00
Fresh Water Flushes Your Inboard Or Generator GRC ARG1253 For ARG-1250 $83.00
Simply And Easily Construction: GRC ARG503 For ARG-500 $48.00
• Cast Bronze GRC ARG753 For ARG-750 $57.00
• Reliable Perko “Made In U.S.A.” Quality
• Uses Standard Perko Strainer Replacement Filter Baskets for Strainers
Parts (Baskets, Gaskets, Cylinders, Nuts And
Tie Rods) ORDER NO. DESCRIPTION PRICE
• Handle Indicates Flow Direction GRC BS1 For ARG/SA-500 $41.00
• Top Casting Removes Easily For Basket GRC BS2 $43.00
Cleaning GRC BS3 For SA-750 $47.00
• Reversible Bulkhead Mounting Option GRC BS4 For ARG-1000 $47.00
• Smooth Acting, Low Torque Ball Valve GRC BS5 For SA-1000 $50.00
• Can Act As An Emergency Bilge Pump GRC BS6 For ARG/SA-1250 $54.00
• Internal Cam Seals Freshwater Intake During For ARG/SA-1500
Normal (Through Strainer) Operation
GRC BS8 For ARG/SA-2000 $58.00

ORDER NO. PIPE SIZE PRICE Service Kits
PER 0593007PLB 1-1/4” $648.06
ORDER NO. DESCRIPTION PRICE
GRC SA1
GRC SA2 SA500 & 750 $24.00
GRC SA3
Spanner Wrench GRC ARG1 SA-1000 & 1250 $25.00
GRC ARG2
For use with strainers and deck GRC ARG3 SA-1500,2000,2500& 3000 $24.00
plates with holes up to 7” apart. Cast bronze with 1/4”
dia. stainless steel pins on one side and 5/16” pins on ARG-500&750 $13.00
the other. Made in USA.
ARG-1000 & 1250 $14.00

ARG-1500,2000,2500 & 3000 $16.00

ORDER NO. PRICE Plastic Cap DESCRIPTION PRICE
GRC SW2531 $24.00 For ARG-500 & 750 $19.00
ORDER NO.
GRC ARG501PC

DRAINS, THRU-HULLS, VALVES 723

South Bay Strainers Ball Valves

Constructed of cast bronze with a replaceable zinc anode to resist Forespar’s MF850 series of Ball Valves are precision molded in high
galvanic action. Strainers easily mount on hull over existing thru-hull strength glass-reinforced Marelon®. Their great strength, light weight,
fittings, scoop strainers, round strainers or high speed
intake strainers. and complete freedom from corrosion and electrolysis make them

the ideal valve for controlling inlet and outlet water requirements

above and below the waterline. Do not fail to

actuate the handle and lubricate the seals on

a regular schedule.

ORDER NO. MODEL NO. THREAD BODY BODY LENGTH PRICE
DIA. W/HANDLE
FRS 905100 MF850 1/2” 1/2”
FRS 905101 MF850 3/4” 3/4” 1-7/8” 3” 4” $41.94
FRS 905104 MF850 1-1/2” 1-1/2” 1-7/8”
3-1/2” 3” 4” $47.94

5” 7-1/2” $144.96

ORDER NO. INTAKE SIZE OVERALL LENGTH WIDTH PRICE Marelon Flange
BOS SBSM 1/2”-3/4” 6-1/2” 3” $76.00
BOS SBMEDSP 3/4”-1” 10-1/2” $132.50 Mounting Seacocks
BOS SBLG 1”-1-1/4” 12-1/2” 4-1/2” $148.00
BOS SBLGSP 1”-1-1/4” 13-1/4” 5-1/2” $164.00 Molded from high-strength Marelon.
6-1/8” Zero corrosion and light weight.

Rectangular Scoop Strainers ORDER NO. THREAD HEIGHT HEIGHT W/ BASE PRICE
SIZE HANDLE
Perforated FRS 904009 1/2” 3” 4” 3” $57.45
FRS 904010 3” 3” $60.96
Manganese bronze 46% open area for FRS 904011 3/4” 5” 4” 6” $137.46
max. intake with bronze slide out screen.
1-1/2” 8”

ORDER NO. DIMENSION PRICE Scoop Strainer

BUC RSS655P 10-5/16’’ x 4-5/8’’ $154.74 Cast Bronze marine UL
BUC RSS1100P 12-3/4’’ x 5-7/8’’ $216.08
BUC OORSS655PS Screen Only f/ RSS655P ORDER NO. FOR THRU-HULL DIMENSIONS PRICE
$41.35 PER 0066DP3PLB 1-1/4 & 1-1/2 6-1/4 x 4-1/4 $76.10

Rectangular Scoop Strainers-Perforated

Cast bronze with stainless steel screens.

ORDER NO. DIMENSIONS PRICE Intake Strainers
BUC RSS650P 6-1/2” x 4” $117.91
BUC RSS1000P 10 x 5-3/4” $173.76 Cast Bronze – Plain marine UL

Pump Strainer ORDER NO. PIPE HULL DIMENSIONS PRICE
SIZE THICKNESS STRAINER INCHES
Cast bronze PER 0065DP4PLB 1/2” $64.24
PER 0065DP5PLB 3/4” 2-1/4” 2-1/2” x 3-1/2” $81.49
PER 0065DP6PLB 2-3/16” 3 x 4” $100.55
PER 0065DP7PLB 1” 2-1/2” 3 x 4” $117.20

1-1/4” 3” 3-1/4” x 4-1/4”

Hose Length Width ORDER NO. PRICE Round Strainer
Size Overall Overall PER 0709DP0PLB $65.39
5/8” 3-5/8’ 1-3/4” Cast bronze.

ORDER NO. DIAMETER PRICE
BUC SR350 3-1/2” $20.23
BUC SR400 4” $23.61
BUC SR500 5” $31.23
BUC SR600 6” $41.01

724 DRAINS, THRU-HULLS, VALVES

Water Strainer Pumpgard In-line Strainer

This water strainer is made of Marelon® (same material as our valves). It Pumpgard in-line strainers keep debris and particles
features an intregal mounting bracket and clear polycarbonate lid for ready from clogging your bilge pump, helping pump run clearer,
inspection. The stainless steel strainer basket can be easily removed longer and cutting down on repairs. Pumpgard uses clear
for cleaning. Intake and exit ports are 1-1/2” ANP threads standard. The plastic housing for quick inspection, one screw for quick disassembly and
mounting bracket allows the strainer exit port to be easy cleaning of 16 mesh stainless steel screen.
positioned in the proper direction by simply loosening Model 36200-0000 is recommended for use with
the bracket clamp and rotating the entire housing. Jabsco. Bilge Pumps. No mounting required, just
This will allows greater flexibility of installation. cut intake line and insert. 3/4’’ (19mm) slip-on
Diameter: 6.3” Height: 6.1”. hose connections.
The flow rate is 40 GPM with 1-1/2” ports.
ORDER NO. PRICE
ORDER NO. PRICE
ITT 362000000 $29.86
FRS 906066 $162.45

Raw Water Strainer Type Seacock Backing Blocks

Cooling water strainer, provided with a transparent cover – Flanged seacock installation is improved with the use of
allowing for easy inspection of the filter without dismantling. a backing block between the valve flange and the hull.
Cleaning of the filter can be achieved quickly and easily. Due to • Each size fits multiple seacock sizes.
the large active surface however, the filter seldom • Press threaded inserts into the hull side of the backing
needs to be cleaned.
Housing: Polypropylene GF block into the holes that match the seacock flange.
Filter Element: HD Polyethylene • 1/2” thickness is rigid enough for a secure installation but
Cover: Styrol/Acrylnitril SAN
flexible enough to conform to minor hull curvature.
• Will not swell or absorb moisture.

ORDER NO. HOSE SIZE PRICE

GRC BB1 3/4” & 1” $49.00

ORDER NO. HOSE I.D. RECOMMENDED PRICE GRC BB2 1-1/4” & 1-1/2” $56.00
INPUT G.P.M.
GRC BB3 2” & 2-1/2” $66.00

VET FTR33019 3/4” 13 $125.00

VET FTR33025 1” 24 $125.00 Bronze Flanged Adaptors

VET FTR33032 1-1/4” 28 $125.00 Patented IBVF Flanged Adaptors have been
developed to address several age-old problems in the marine industry.
VET FTR33038 1-1/2” 52 $125.00 Here is what they do:
• Eliminate common (and dangerous) thread mis-match when in-line
Strainers
valves are screwed onto thru hulls.
• Stops debris entering suction hose • Accept standard thru-hulls into the base and standard in-line valves or
• Fitted non-return valve prevents drainback
• Removable straining plate for easy cleaning other components on top.
• Available in top entry (for deeper bilges) or side entry (shallower bilges) • Provide a safe and sturdy assembly when in-line valves are used as
• Suitable for 1” and 1-1/2” hose
• Fitted at end of suction hose deep in bilges to allow maximum amount seacocks.
• Prevent valve damage during engine or generator
of water to be pumped from bilges
installation - the valve can be installed later.
• Make future valve replacement a simple job.

ORDER NO. DESCRIPTION PRICE ORDER NO. DESCRIPTION PRICE
WHA SB4222 Side Entry $30.48 GRC IBVF750 3/4” $44.00
WHA SB5865 Top Entry $30.48 GRC IBVF1000 1” $47.00
GRC IBVF1250 1-1/4” $53.00
Sea Flange Valves GRC IBVF1500 1-1/2” $70.02
GRC IBVF2000 2” $84.00
An all bronze ball type valve.

• Underwriters Laboratories Listed Sea Valve PWRR. Full Flow Ball Type Seacocks
• Chromium-plated bronze bal—resists damage from marine growth.
• Easy on-off operation. No thumb Screws To Create Seal. • Full pipe-size flow with all sizes; no restrictions to reduce the flow of
• Compact, Streamlined Efficient Design. water through the valve, as with most other ball valves. Your engines
• The first ball type UL Listed sea valve. and other equipment will get the full flow of water required for optimum
• All bronze wetted metallic components. operating efficiency.
• Glass reinforced TFE seats and seals.
• Manufactured on sophisticated highly accurate machine • Bronze valve body is flanged for a more secure installation.
• Stainless steel ball and stem.
tools to exacting quality control standards. • Long life Teflon seats and seals.
• Stainless steel levers and nuts. • Designed and manufactured with in-field
• No lubrication required.
serviceability in mind.
Bronze thread ends

ORDER NO. SIZE PRICE PLUMBING CONNECTIONS

*CON 7811501F 3/4” $89.20 ORDER NO. BOTTOM TOP PRICE

CON 7811801 1” $126.05 GRC BV750 3/4”NPS 3/4” NPT $200.00

CON 7811901 1-1/4” $135.56 GRC BV1000 1” NPS 1” NPS $242.00
GRC BV1250 1-1/4” NPS 1-1/4” NPT $304.00
*CON 7811601F 1-1/2” $193.85 Marine
U.L. Listed
CON 7812001 2” $348.51 GRC BV1500 1-1/2” NPS 1-1/2” NPT $349.00
GRC BV2000 2” NPS 2” NPT $479.00 Marine UL Listed
*Full Flow Valves Sea Valves

DRAINS, THRU-HULLS, VALVES 725

Full-Flow Flanged Ball Valves Shut Off Valve
w/Zerk Fittings
Chromium plated ball. Reinforced TFE seats and stuffing box ring.
Field reversible handle allows you to select the closed position Blow-out-proof stem design. Meets WW-V-35C Type: II
orientation (clockwise or counter-clockwise) that best suits the installation. Composition: BZ Style: 3. Stainless steel lever & nut.
• Handle has square hole to accept standard ratchet, to help with
ORDER NO. SIZE PRICE
hard-to-reach valves and those that are difficult to operate
• Full Pipe Size Flow CON 7010110 1/4” $26.34
• Triangular Base with bolt pattern to match most CON 7010210 3/8” $26.34
CON 7010310 1/2” $26.34
popular brands makes retrofit easy CON 7010410 3/4” $43.48
• Stainless steel stem, handle and hardware CON 7010510 1” $51.85
• Chrome plated brass ball CON 7010610 1-1/4” $103.30
• Teflon Seats and Seals CON 7010710 1-1/2” $110.02
• Bonding attachment on base CON 7010810 2” $132.23
• Drain Plugs On Both Sides For Convenience Of Winterization

ORDER NO. THREADED SIZE PRICE Full Flow Ball Valves – Stainless Steel
GRC FBV750 3/4” $62.00

GRC FBV1000 1” $86.00 • Handle has square hole to accept standard

GRC FBV1250 1-1/4” $105.00 ratchet (helps you to reach hard-to-reach valves

GRC FBV1500 1-1/2” $142.00 and eases actuation of hard to operate valves).

GRC FBV2000 2” $233.00 • Handle has thumb-release locking mechanism to ensure that the valve

remains in the open or closed position you have selected until you wish

Bronze Threaded Shut Off Valve to change it.

• #304 SS handle and trim • #316 SS body

ORDER NO. THREADED SIZE PRICE 316 stainless steel ball, • Bonding attachment • TFE seats
$37.93 stem, lever and nut.
$68.50 • Stainless steel ball • Full flow
$79.08
CON 7014310 1/2” ORDER NO. THREADED SIZE PRICE
$129.44 GRC IBV500S 1/2” $53.00
CON 7014410 3/4” $171.41 GRC IBV750S 3/4” $57.00
GRC IBV1000S 1” $43.98
CON 7014510 1” GRC IBV1250S 1-1/4” $94.00
GRC IBV1500S 1-1/2”
CON 7014610 1-1/4” GRC IBV2000S 2” $178.72
$157.00
CON 7014710 1-1/2”

Full Flow Ball Valves

w/Zerk Fittings

• Handle has square hole to accept standard ratchet (helps you to reach Bronze Thru Hull Fittings

hard-to-reach valves and eases actuation of hard to operate valves).

• Compact and economical in-line valve offers full flow in all sizes. For those whose boats are too good for plastic
below-the-waterline hardware, our bronze fittings have no equal.
• Bronze body • Drain plug Included

• TFE seats • Chrome-plated ball PIPE LENGTH
SIZE OF NECK
• Bonding attachment • Patented selectable handle ORDER NO. PRICE

• #304 SS handle and trim rotation GRC TH500W 1/2” 2-1/4” $15.50

ORDER NO. THREADED SIZE PRICE GRC TH750W 3/4” 2-1/4” $18.00
$18.00
GRC IBV250 1/4” $18.00 GRC TH1000W 1” 2-3/4” $26.75
$24.50
GRC IBV375 3/8” $31.00 GRC TH1250W 1-1/4” 3-1/4” $47.75
$57.00
GRC IBV500 1/2” $76.00 GRC TH1500W 1-1/2” 3-5/8” $65.75

GRC IBV750 3/4” $107.00 GRC TH2000W 2” 3-7/8” $87.50
$174.00
GRC IBV1000 1”

GRC IBV1250 1-1/4” Stainless Steel

GRC IBV1500 1-1/2” Barb Thru Hull

GRC IBV2000 2” 316 S.S. Thru-Hull. Barb length 1-1/4”

Thru-Hull Connectors ORDER NO. HOSE LENGTH FLANGE PRICE
SIZE DIAMETER
Full Threaded/Mushroom Head WHT 6546 5/8” $28.32
WHT 6547 3/4” 3-3/4” 1-7/8” $33.57
Thru-Hull Connectors are precision molded in high strength WHT 6548 $46.78
glass-reinforced Marelon®. WHT 6549 1” 3-3/4” 1-7/8” $51.35
WHT 6550 1-1/8” $44.10
THREAD WHT 6551 1-1/4” 3-7/8” 2-1/4” $72.15
SIZE 1-1/2”
ORDER NO. MODEL NO. LENGTH PRICE 3-7/8” 2-1/4”

FRS 906010 CF2511/2 1/2” 2” $15.97 4-1/4” 2-3/4”

FRS 906012 CF2513/4 3/4” 2.25” $16.97 4-3/8” 3”

FRS 906014 CF2511 1” 2.375” $19.42 Thru Hull with Scupper

FRS 906016 CF2511-1/4 1-1/4” 3” $22.45 Scupper With Barb - 316 S.S. Stainless

FRS 906018 CF2511-1/2 1-1/2” 3” $28.98 Steel/Nylon

FRS 906020 CF2512 2” 3” $38.46 • Hose Size - 2”

Angled Thru Hull with Scupper • Flange O.D. - 3-1/4” • Overall Length - 5”
• Thread Length - 2-1/4” • Cut Out - 2-1/4”
10 degree angle • Barb Length - 1-3/4” • Max Hull Thickness - 2”

ORDER NO. Barb Length: 1-1/2” ORDER NO. PRICE
WHT 6559 PRICE Cut Out: 2-1/8” WHT 6561 $30.24

$34.14 Hose Size: 1-1/2”

726 DRAINS, THRU-HULLS, VALVES

Thru-Hull Connection Thru Hull Connection, Bronze Fitting
With Nut
Molded White Plastic Narrow Flange

Marine U.L. Listed ORDER NO. SIZE LENGTH PRICE
Package 10, 1 per card
CON 65BN763 1/2” 2.5” $22.10
ORDER NO. MAXIMUM HULL O.D. PRICE CON 65BN750 3/4” 2.46” $25.81
PER 0301DP4 HOSE SIZE THICKNESS CON 65BN751 1” 2.75” $37.96
CON 65BN752 1-1/4” 3.2” $57.76
1/2” 1-1/4” 1 1/4 $6.25 CON 65BN753 1-1/2” 3.6” $74.27
CON 65BN754 2” 3.8” $95.36
SS/Plastic Thru Hull
Stainless Steel
Less then half the price of stainless steel.
Made of a high impact resin with a 316 S.S. flange for a long life. Thru-Hull Connectors

ORDER NO. HOSE SIZE PRICE Flange O.D. 1-7/8” • Cast from certified #316 Stainless Steel alloy for strength and life
WHT S3800C 5/8” $13.01 Thread Length 1-1/2” time corrosion resistance.
WHT S3801C 3/4” $13.01 Cut-Out 1-1/4”
WHT S3802C 1” $14.17 • We polish all visible areas to a mirror finish, then send each part
WHT S3803C 1-1/8” $14.17 through passivation for additional protection.
WHT S3805C 1-1/2” $22.61
• Thick steel sidewalls withstand continual stress and hose flexing

ORDER NO. SIZE PRICE

ATT 665463 5/8” $27.37

Thru-Hull Connections ATT 665473 3/4” $30.14
ATT 665483 1” $35.21
Flange is machined to fit hull and grooved to ATT 665493 1-1/8” $41.99
retain bedding compound. Neck is threaded
to Approximately 3/8 inch from flange. ATT 665503 1-1/4” $52.27
ATT 665513 1-1/2” $61.17

Marine U.L. Listed Plastic Thru-Hull Connectors
Plain Bronze
Molded of tough acetal resin plastic. Will not rust, corrode,
ORDER NO. HOSE MAXIMUM HULL O.D. PRICE discolor or, because they’re nonmetallic, contribute to
THICKNESS electrolysis. Special design reduces hull streaking, also
PER 0350004DPP 5/8 1-1/16” 1-1/2 $39.03 allows counter-sinking wherever a flush fit is required.
PER 0350005DPP 3/4 1-5/8” 1-7/8 $55.89
PER 0350006DPP 1 1-3/4” 2-1/4 $82.49 Hose I.D.: 5/8”. Hose I.D.: 3/4”.
PER 035006ADPP 1-1/8 1-3/4” 2-1/4 $73.63 Stem length: 3-1/4”. Stem length: 3-1/4”.
PER 0350007DPP 1-1/4 1-7/8” 2-3/4 $87.40 Maximum hull thickness: 1-1/2”. Maximum hull thickness: 1-1/2”.
PER 0350008DPP 1-1/2 1-7/8” 3-1/8 $112.34 Flange diameter: 1-1/4”. Flange diameter: 1-1/4”.
Installation hole diameter: 1-1/8”. Installation hole diameter: 1-1/8”.
Chrome Plated Bronze MAXIMUM HULL
THICKNESS ORDER NO. PRICE
ORDER NO. HOSE 1-1/16” O.D. PRICE ATT 38721 $4.98
1-5/8”
PER 0350004DPC 5/8 1-3/4” 1-1/2 $45.87 Hose I.D.: 1-1/2”. ORDER NO. PACKAGING PRICE
PER 0350005DPC 3/4 2 1-7/8 $62.88 Stem length: 3-1/2”. ATT 38733 Skin Pack $5.09
PER 035006ADPC 1-1/8 2-1/4 $82.69 Maximum hull thickness: 1-1/2”. ATT 38731 Bulk $4.98
PER 0350009CHR 2 3-3/4 $179.01 Flange diameter: 3”.
Installation hole diameter: 2”. Hose I.D.: 1-1/8” to 1-1/4”.
Thru-Hull Connections Stem length: 3-1/4”.
ORDER NO. PRICE Maximum hull thickness: 1-3/8”.
Cast Bronze ATT 38751 $8.67 Flange diameter: 2-1/4”.
Installation hole diameter: 1-3/8”.

Flange is machined to fit hull and grooved to retain bedding ORDER NO. PACKAGING PRICE
compound. Neck is threaded to approximately 3/8 Inch from flange.
ATT 38743 Skin Pack $8.21

ATT 38741 Bulk $8.12

Marine U.L. Listed

ORDER NO. PIPE SIZE MAXIMUM HULL O.D. PRICE Thru-Hull Connection
THICKNESS FLANGE
$45.25 Molded White Plastic
1-3/8” 1-1/2” $46.76
PER 0322DP4PLB 1/2” 1-1/2” 1-7/8” $63.85 Marine U.l. Listed Broad Flange
PER 0322DP5PLB 3/4” 1-7/8” 2-3/16” $96.40
PER 0322DP6PLB 1” 2-3/4” $117.24 ORDER NO. HOSE MAXIMUM HULL O.D. PRICE
PER 0322DP7PLB 1-1/4” 2” $154.57 THICKNESS FLANGE
PER 0322DP8PLB 1-1/2” 2-1/4” 3” PER 0328DP4 1/2 1-1/4” $5.67
PER 0322009PLB 2” 2-3/8” 3-5/8” PER 0328DP4A 5/8 1-1/4” 1-1/2” $5.74
Extra Long PER 0328DP5 3/4 1-7/16” 1-1/2” $5.95
PER 0328DP6 1 1-1/2” 1-7/8” $11.93
ORDER NO. PIPE SIZE MAXIMUM HULL O.D. PRICE PER 0328DP6A 1-1/8 1-1/2” 2-1/4” $12.05
THICKNESS FLANGE PER 0328DP8 1-1/2 1-7/8” 2-1/4” $16.06
PER 0348DP5PLB 3/4” $85.85
PER 0348DP6PLB 1” 5” 1-7/8” $91.16 3”
4-7/8” 2-1/4”

DRAINS, THRU-HULLS, VALVES 727

Pipe to Hose Adapters Full Flow Pipe-to-Hose
Bronze Adaptors
Cast Bronze – 90 Degrees
FF Series – Straight full flow
Meets the requirements of U.S.C.G. Safety FFC Series – 90 full flow
Standards. January 31, 1977, for Gasoline
Fuel Systems. MARINE UL ORDER NO. DESCRIPTION HOSE SZ. PRICE
GRC FF500 1/2” Straight 3/4” $8.00
ORDER NO. PIPE SIZE HOSE SIZE LENGTH PRICE GRC FF750 3/4” Straight 1” $10.00
GRC FF1000 1” Straight 1-1/4” $13.00
PER 0063DP5PLB 3/4” 3/4” 4-1/2” $27.34 GRC FF1250 1-1/4” Straight 1-1/2” $21.51
PER 0063DP6PLB 1” 1” 4-3/4” $34.89 GRC FF1500 1-1/2” Straight 1-3/4” $25.00
PER 0063DP7PLB 1-1/4” 1-1/4” 5-1/2” $48.96 GRC FFC500 1/2” 90° 3/4” $13.00
PER 0063DP8PLB 1-1/2” 1-1/2” $61.76 GRC FFC750 3/4” 90° 1” $18.00
PER 0063009PLB 2” 2” 6” $105.73 GRC FFC1000 1” 90° 1-1/4” $26.00
7” GRC FFC1250 1-1/4” 90° 1-1/2” $41.00
GRC FFC1500 1-1/2” 90° 1-3/4” $52.00

Pipe to Hose Adapter Elbows

ORDER NO. HOSE SIZE PRICE Molded from high-strength glass-reinforced Marelon®.

PER 0076DP4PLB 5/8” $15.82 Cast Bronze
PER 0076DP5PLB 3/4” $18.69
PER 0076DP6PLB 1” $23.05
PER 0076DP7PLB 1-1/4” $35.30
PER 0076DP8PLB 1-1/2” $48.68
PER 0076009PLB 2” $60.62

Bronze Tail Pieces

ORDER NO. MODEL NO. A B C D E PRICE

ORDER NO. PIPE HOSE ID PRICE FRS 901000 HECM 8 1/2” 5/8” 7/16” 2” 1-1/2” $3.29

GRC PTH5062 1/2” 1/2” or 5/8” $6.00 FRS 901001 HECM.12 3/4” 3/4” 1/2” 2-1/8” 1-5/8” $3.95

GRC PTH750 3/4” 3/4” $7.00 FRS 901003 HECM 20 1-1/4” 1-1/4” 7/8” 2-3/4” 2-5/16” $6.94

GRC PTH1000 1” 1” $10.00 FRS 901004 HECM 24 1-1/2” 1-1/2” 1-1/16” 3-1/4” 2-3/4” $9.93

GRC PTH1250 1-1/4” 1-1/4” $18.00 FRS 901006 HECF 8 1/2” 5/8” 7/16” 2” 1-5/8” $3.11

GRC PTH1500 1-1/2” 1-1/2” $23.00 FRS 901007 HECF 12 3/4” 3/4” 9/16” 2-3/16” 1-3/4” $3.95

FRS 901008 HECF 16 1” 1” 5/8” 2-1/2” 1-7/8” $5.95

FRS 901009 HECF 20 1-1/4” 1-1/4” 7/8” 2-3/4” 2-1/2” $6.94

Bronze Tail Pieces FRS 901010 HECF 24 1-1/2” 1-1/2” 1-1/8” 3-1/8” 2-3/4” $9.93

Fits Sea-cock or thru-hull size – hose I.D. and thru-hull same.

ORDER NO. SIZE PRICE Female 1/2 & 3/4 Pipe Thread Barbed Fitting
GRC TPC750 3/4” $28.00
GRC TPC1000 1” $28.00 This fitting is made of high strength
GRC TPC1250 1-1/4” $26.00 glass-reinforced Marelon®.
GRC TPC1500 1-1/2” $40.00
GRC TPC2000 2” $66.05 ORDER NO. MODEL # SIZE PRICE

FRS 901014 HCSF-8X8 1/2X1/2 $5.94
FRS 901015 HCSF-12X12 3/4X3/4 $6.93

Bronze Pipe To Hose Bronze 90 Degree Pipe To Hose Bronze Tail
Adapter Pieces
Adapter
ORDER NO. SIZE PRICE
Single-piece construction and cast-in wrench GRC TP750 3/4” $21.00
flats make installation easier. GRC TP1000 1” $33.00
GRC TP1250 1-1/4” $31.00
ORDER NO. HOSE SIZE PRICE ORDER NO. HOSE SIZE PRICE GRC TP1500 1-1/2” $39.00
GRC TP2000 2” $61.00
CON 6500756 1/2” or 5/8” $6.22 CON 6590750 1/2” or 5/8” $15.95
CON 6500751 3/4” $8.45 $14.72
CON 6500752 1” $13.24 CON 6590751 3/4” $23.01
CON 6500753 1-1/4” $18.31 $37.57
CON 6500754 1-1/2” $26.31 CON 6590752 1” $44.71
CON 6500755 2” $39.95 $78.91
CON 6590753 1-1/4”

CON 6590754 1-1/2”

CON 6590755 2”

728 DRAINS, THRU-HULLS, VALVES

Flax Packing Marelon Thru-Hull Connectors 250 Series

Flax packing has been the accepted standard Full Threaded/Flush Head
in the marine community as replacement
packing for the stuffing box. This flax packing ORDER NO. THREAD LENGTH PRICE
is braided to specific tolerances and is then FRS 906000 1/2” 2” $13.94
impregnated with natural lubricants. The FRS 906002 3/4” $15.96
result is a quality shaft packing available at FRS 906004 1” 2-1/4” $15.96
affordable pricing. FRS 906006 1-1/4” 2-3/8” $18.46
FRS 906008 1-1/2” $28.96
3”
3”

ORDER NO. SIZE FEET PER SPOOL PRICE Marelon Thru-Hull Connectors
WPT 10050 1/8” 122 FT $18.75 253 Series Hose Tailpipe/Mushroom Head
WPT 10051 3/16” 55 FT $18.75
WPT 10052 1/4” 32 FT $18.75 ORDER NO. THREAD THREAD BARB PRICE
WPT 10053 5/16” 20 FT $18.75 LENGTH LENGTH
WPT 10054 3/8” 14 FT $18.75 FRS 906022 1/2” $15.96
WPT 10056 1/2’ 8 FT $18.75 FRS 906024 3/4” 1.49” .975 $16.97
WPT 10076 3/4” 17 FT $93.75 FRS 906026 1” $19.42
FRS 906028 1-1/4” 1.67” 1.02 $22.96

1.69” 1.08

1.81” 1.28

Flax Packing FRS 906030 1-1/2” 1.875” 1.28 $28.98
FRS 906032 2” 1.875” 1.35 $35.45
The flax packing is braided to specific tolerances out of quality rovings
that are impregnated with natural lubricants. This traditional packing is
reliability at affordable pricing. 2 feet per package.

ORDER NO. SIZE PRICE Thru Hull Fittings RUL 60
WPT 10001 1/8” $3.94
WPT 10002 3/16” $4.88 High impact plastic will not rust, corrode
WPT 10003 1/4” $5.82 or discolor. Specially designed for Rule
WPT 10004 5/16” $7.13 pumps.
WPT 10005 3/8” $8.82
WPT 10007 1/2” ORDER NO. DESCRIPTION PRICE
$11.62
RUL 60 1-1/8” Straight $11.63

RUL 61 3/4” Right Angle $10.49 RUL 61

Teflon PTFE Flax Packing Tailpipes

PTFE Flax packing is braided from quality flax rovings which are then Our Tailpipes are also made from high-strength
impregnated with Teflon. The result is a quality packing that offers high glass-reinforced Marelon®. Perfect choice for joining hose lines to
performance and extended packing life. 2’ per package.
RC Products Ball Valves and Seacocks.

ORDER NO. SIZE PRICE
WPT 10016 3/16” $6.76
WPT 10017 1/4” $7.68
WPT 10018 5/16”
$10.50

WPT 10019 3/8” $13.88

WPT 10021 1/2” $20.63 ORDER NO. MODEL THREAD TAILPIPE A B C PRICE

Rudder Port FRS 905006 CF2521/2 1/2” 5/8” 1” 1” 2-1/4” $4.10
FRS 905007 CF2523/4 3/4” 3/4” 1” 1-1/32” 2-1/2” $4.10
ORDER NO. SHAFT BARREL FLANGE PRICE FRS 905008 CF2521 1” 1” 1-15/32” 1-1/16” 3” $7.45
LENGTH FRS 905009 CF2521-1/4 1-1/4” 1-1/4” 1-5/8” 1-1/4” 3-1/4” $7.45
FRS 905010 CF2521-1/2 1-1/2” 1-7/16” 1-5/8” 1-1/4” 3-1/4” $7.95

BUC RP100 1” 4” 3-7/8.sq. $190.74 Teflon Flax Packing

BUC RP125 1-1/4” 4” 4-1/4.sq. $265.79 This popular shaft packing is a blend of quality flax rovings that are
braided to a high quality standard. The braid
Packing Extractor Tools is then impregnated with TEFLON (PTFE) to
give it a low surface friction. This combination
ORDER NO. DESCRIPTION PRICE results in a packing that delivers solid
WPT 10159 #0 shaft-length 7” $9.38 performance, season after season.
WPT 10160 #1 shaft-length 7.75” 1 lb. spools
WPT 10161 #2 shaft-length 11.50” $12.56
WPT 10162 #3 shaft-length 15.50” $14.63 ORDER NO. SIZE FEET PER PRICE
$17.82 SPOOL
WPT 10102 1/4” 33’ $47.25
WPT 10103 5/16” $47.25
WPT 10104 3/8” 15’ $47.25

10’

DRAINS, THRU-HULLS, VALVES 729

Dripless Shaft Seals Gen II Packing Box Hose

Lasdrop Shaft-Seals has remained the first name in ORDER NO. FITS PACKING SHAFT HOSE HOSE HOSE PRICE
marine dripless shaft seals. Using the highest quality BOX MODEL SIZE ID OD LENGTH
materials and advanced engineering, our products
keep water where it belongs: outside your vessel. BUC HO150 PB75, PB100x 3/4”–1” 1 1/2” 2 1/4” 4” $14.24
Equally important, it prevents contaminated bilge 2” 2 3/4” 4” $14.43
water from being pumped into our waterways. BUC HO2001 PB100fg, PB113fg, 1”–
PB125fg 1 1/4” 2 1/4” 3” 4 1/2” $15.27

• Now has dual injection ports • Constructed of the highest grade BUC HO225 PB100225, PB113h, 1”– 2 1/2” 3 1/4” 5” $20.35
• Dripless operation materials PB125, PB15225, 1 1/4” 3” 3 3/4” 5 1/2” $32.10
• Keeps bilge dry PB125Lh
• Replaces stuffing box • Little or no maintenance
• No need for repacking • Kit contains everything you need BUC HO250 PB138, PB150, PB175, 1 3/8”–
• Eliminates shaft wear • Three year Warranty
• Reduces saltwater corrosion • Quality products since 1975 PB150Lh 1 3/4”
• Eliminates odors • Designed and manufactured in
BUC HO300 PB175, PB200, 1 3/4”–
USA
PB175Lh, PB200Lh 2”

The Gen II offers exclusive features that make it the premier shaft Packing Box
seal on the market. The culmination of more than a quarter century of
experience in shaft seal design, the Gen II offers a unique ball-bearing Complete assembly: The nut, spud & body
drive system that allows the seal ring to “float” and remain in constant are finely machined cost bronze. Hose is 5 ply
contact with the carbon graphite seal surface. The result is a seal that’s marine exhaust hose. Clamp is all stainless
impenetrable to water. The Gen II uses a 316-marine grade stainless steel up to and incl. 1-1/4” sizes.
steel spring to provide pressure to the seal surfaces. Together, the
spring and seal ring rotate along with the shaft, and remain secured ORDER NO. PART NUMBER SHAFT SIZE PRICE
in the Clamp/Pressure housing. Because there’s virtually no metal-to-
metal contact, you eliminate the risk of electrolysis. BUC PB100 PB-100 1” $112.96
BUC PB125 PB-125 1-1/4” $171.59

ORDER NO. SHAFT SIZE STERN TUBE PRICE Standard Brass Sleeve Bearings
LAS G100134 1” 1-3/4” $377.00
LAS G1142 2” $388.00 All materials meet U.S. Navy
LAS G114214 1-1/4” 2-1/4” $388.00 specifications. MIL-B-17901A CLII.
LAS G114212 1-1/4” 2-1/2” $388.00 Bearings are designed to meet requirements
LAS G114258 1-1/4” 2-5/8” $388.00 of American Bureau of Shipping.
LAS G112212 1-1/4” 2-1/2” $437.99
LAS G1343 1-1/2” 3” $534.00 ORDER NO. CODE SHAFT O.D. LENGTH SHELL PRICE
LAS G200312 1-3/4” 3-1/2” $574.00 SIZE THICK
TRL E00100 $77.42
2” TRL E00200 AB CD $83.55
TRL E00300 $82.67
TRL E00400 ALBACORE 3/4” 1-1/4” 3” 1/8” $93.07
TRL E00500 $79.12
TRL E00600 BLENNY 7/8” 1-1/4” 3-1/2” 1/16” $80.95
TRL E00700 $85.55
TRL E00800 BARRACUDA 7/8” 1-3/8” 3-1/2” 1/8” $89.40
TRL E00900 $88.65
TRL E01000 BASS 7/8” 1-1/2” 3-1/2” 1/8” $107.33
TRL E01100 $106.06
Elite Seal TRL E01200 BETTA 1” 1-1/4” 3” 1/32” $102.60
TRL E01300 $111.57
The Lasdrop Elite Seal is a compact, economical lip seal designed for TRL E01500 BLACKFISH 1” 1-1/4” 4” 1/32” $107.32
quick and easy installation. The lip seal, made specifically for marine TRL E01600 $108.18
use, is in constant low friction contact with the propeller shaft, preventing TRL E01700 BLOATER 1” 1-3/8” 4” 1/16” $113.34
water from passing in your vessel. There is a back-up seal available that TRL E01900 $132.18
can be installed during the original installation changeable in the future TRL E02000 BONITO 1” 1-1/2” 4” 1/8” $137.68
without the need of removing the shaft or unit. TRL E02100 $142.40
TRL E02300 BROADBILL 1” 1-5/8” 4” 1/8” $135.50
• Split-face plate makes it easy to replace inner lip seal with a TRL E02400 $149.46
back-up seal without the need for special installation tools. TRL E02500 BULLHEAD 1” 2” 4” 1/8” $157.95
TRL E02800 $184.16
• Seal housing is constructed of a durable TRL E02900 CAMA 1-1/8” 1-1/2” 4-1/2” 1/16” $188.27
copolymer with built in water lubricated TRL E03200 $209.50
bearing insuring proper alignment to TRL E03600 CARP 1-1/8” 1-5/8” 4-1/2” 1/8” $261.05
the shaft. TRL E03700 $271.97
TRL E04000 CATFISH 1-1/8” 1-3/4” 4-1/2” 1/8” $328.22
• All units have dual water injection TRL E04100 $322.63
ports including necessary hardware. CHOGSET 1-1/4” 1-1/2” 5” 1/32”
For ¾” to 1” seals, dual port available upon CHUB 1-1/4” 1-3/4” 5” 1/8”
request.
COD 1-1/4” 2” 5” 1/8”

DEVILFISH 1-3/8” 1-7/8” 5-1/2” 1/8”

DOGFISH 1-3/8” 2” 5-1/2” 1/8”

DOLPHIN 1-3/8” 2-1/8” 5-1/2” 1/8”

FLAMEN 1-1/2” 2” 4-3/8” 1/8”

ORDER NO. SHAFT SIZE STERN TUBE DIAMETER PRICE FLATFISH 1-1/2” 2” 6” 1/8”
LAS E100134 1” 1-3/4” $215.00
LAS E1002 1” 2” $215.00 FLOUNDER 1-1/2” 2 3/8” 6” 1/8”
LAS E1142 2 $259.00 GROUPER 1 3/4” 2-3/8” 7” 1/8”
LAS E114214 1-1/4” 2-1/4” $259.00
LAS E114212 1-1/4” 2-1/2” $259.00 HADDO 1 3/4” 2-5/8” 7” 1/8”
LAS E112212 1-1/4” 2-1/2” $317.00
LAS E1343 1-1/2” 3” $368.00 HERRING 2” 2-5/8” 8” 1/8”
1-3/4”
MARLIN 2-1/4” 2-15/16” 9” 1/8”

MINNOW 2-1/4” 3-1/8” 9” 1/8”
MUSKY 2-1/2” 3-1/8” 10” 1/8”

PERCH 2-1/2” 3-3/8” 10” 1/8”

730 ZINCS/ANODES Yamaha

Honda

Zinc Anodes

ORDER NO. DESCRIptION pRICE
MtR CM06411ZW1000
MtR CM31640 Large bar for 75-115 HP $45.22
MtR CM826134
Skeg Zinc $14.35

Wedge Zinc $12.18

Volvo Stern Drive Zinc Anodes DESCRIptION pRICE
Skeg Zinc 225-250 HP $21.39
ORDER NO. $20.78
MtR CMY61A4537100 Skeg Zinc $6.59
MtR CMY6884537102 Small Block Zinc $27.92
MtR CMY6E54525100 Handlebar Zinc $18.38
MtR CMY6G54525101 $20.98
MtR CMY6H14525102 Bar Zinc $46.28
MtR CMY6J94537100 Skeg Zinc $29.89
MtR CMY6K14537100 Skeg Zinc $21.74
MtR CMY6E54537101 Skeg Zinc $25.30
MtR CM6K14537102 Trim Tab (Counter Rotation) $20.32
MtR CM69L4537100 Trim Tab
MtR CMY6644537101 Cutdown Skeg

Johnson Evinrude
Bombardier

Zinc Anodes DESCRIptION pRICE Aluminum Anodes
Gimbal Plate SX Drive $33.53
ORDER NO. Transom Plate for SX Drive $43.05
MtR CM3854130 $26.00
MtR CM3855411 Dogbone Zinc $46.94
MtR CM832598 Bar Zinc $41.86
MtR CM852835 $11.73
MtR CM872139 Bar for DP-X Drive $25.63
MtR CM872793 Triangle for 290, DP, SX, DP-X $27.55
MtR CMV18
MtR CM875821 Large Ring
Duo-prop Ring

Volvo Aluminum Anodes ORDER NO. DESCRIptION pRICE
MtR CM5007089A Power T/T Zinc $12.58

ORDER NO. DESCRIptION pRICE Zinc Anodes pRICE
$16.48
MtR CM3883728A Cavitation Plate Anode $15.77 ORDER NO. DESCRIptION $20.08
MtR CM393023 Block Zinc $20.66
MtR CM3841427A Transom Shield Anode $14.29 MtR CM398331 Block Zinc
MtR CM433580
MtR CM872793A Triangle Anode $6.25 Power T/T Zinc

MtR CM873395A Cube Anode f/DPX series $8.97

ZINCS/ANODES 731

MTR CM826134

Mercury Force Mariner Aluminum Anodes
Zinc Anodes
ORDER NO. pRICE

MtR CM818298A $9.31

ORDER NO. DESCRIptION pRICE Magnesium Anodes
MtR CM31640 Standard Skeg Zinc $14.35
MtR CM43396 $26.53 ORDER NO. pRICE
MtR CMA76214 Waffle Bar Zinc $11.61
MtR CM818298 Skeg Circular Plate $18.57
MtR CM826134 $12.18
MtR CM822157 Outboard Bar $13.65
Wedge

Trim Tab 30-50 HP

MtR CM818298M $17.85

Suzuki OMC Stern Drive

Zinc Anodes DESCRIptION pRICE Zinc Anodes
Standard Skeg $12.18
ORDER NO. $7.39 ORDER NO. DESCRIptION pRICE
MtR CMS5512587D00 Small Block $22.38 MtR CM984513 Horseshoe Zinc $34.15
MtR CMS5532095310 Bar Zinc MtR CM393023 $16.48
MtR CM55321Z94900Z Block Zinc

Mercruiser Stern Drive

Zinc Anodes DESCRIptION pRICE Magnesium Anodes for Aluminum Anodes for
Standard Trim Tab $14.35 Mercruiser/Mercury OB Mercruiser/Mercury OB
ORDER NO. $35.64 Freshwater Only
MtR CM31640 Block Plate $13.98 ORDER NO. pRICE
MtR CM43994 Cutdown Trim Tab $4.22 ORDER NO. pRICE MtR CM762145A $8.62
MtR CM46399 $12.44 MtR CM31640M $13.01 MtR CM826134A $5.16
MtR CMC55989 Button Zinc $24.57 MtR CM806190M $10.43 MtR CM818298A $9.31
MtR CM762145 New Generation Flat Tab $28.41 MtR CM762144M MtR CM821631A
MtR CM806105 $3.60 MtR CM762145M $9.79 MtR CM806105A $14.87
MtR CM806188 Bearing Carrier Alpha $8.25 MtR CM806189M $14.71 MtR CM806189A $15.48
MtR CM806189 Bearing Carrier Bravo $22.72 MtR CM821629A
MtR CM806190 $23.95 $9.60 MtR CM806188A $3.81
MtR CM821629 Alpha Trim Ram $32.92 MtR CM806190A $15.75
MtR CM821630 Bravo Trim Ram $12.18 MtR CM821630A $14.98
MtR CM821631 $11.77
MtR CM826134 Gen II Plate $9.37
MtR CM762144 Bravo Plate $13.11
Cavitation Plate Gen II
Wedge Gen II

Trim Tab

732 ZINCS/ANODES

Zinc Rudder Anodes

ORDER NO. DIAMETER CTN. PRICE Zinc Bennett Trim Tab Anodes
MTR CMR1 1-7/8” 200 $4.75
MTR CMR2 50 ORDER NO. PRICE
MTR CMR3 2-13/16” 25 $13.70 MTR BNT1AZ $12.59
MTR CMR4 3-3/4” 10 $18.90
MTR CMR5 5” $34.65 Zinc Streamlined Anodes
5-1/8” 9 $51.10

Aluminum Rudder Anodes ORDER NO. SHAFT SIZE CTN. PRICE
MTR CMX00 1/2” 36 $13.12
ORDER NO. DIAMETER CTN. PRICE MTR CMX1 3/4” 36 $11.48
MTR CMR1AL 1-7/8” 200 $4.60 MTR CMX2 7/8” 36 $11.16
MTR CMR2AL 50 $8.09 MTR CMX3 1” 36 $12.76
MTR CMR3AL 2-13/16” 25 MTR CMX4 1-1/8” 36 $15.25
MTR CMR4AL 3-3/4” 10 $11.11 MTR CMX5 1-1/4” 30 $15.09
5” $22.44 MTR CMX5A 24 $15.93
1-1/4” (heavy
Zinc Hull Anodes MTR CMX6 duty) 24 $19.14
MTR CMX7 1-3/8” 20 $22.15
MTR CMX8 1-1/2” 10 $30.34
MTR CMX9 1-3/4” 10 $36.42
MTR CMX10 2” 4 $69.99
MTR CMX11 2-1/4” 4 $72.73
2-1/2”

CMZD72BM N1 CMZD56 Aluminum Streamlined Anodes

ORDER NO. DIAMETER PRICE

MTR CMX1AL 3/4” $8.35

Zinc Limited Clearance (Donut) Anodes

M25 ZHC2, ZHC3, ZHC5 MZ406 ORDER NO. SHAFT SIZE O.D. DIA. PRICE
T20 MTR CMC1 3/4” 2-1/8” $13.25
Diver Mini MZ404 MTR CMC3 1” 2-1/2” $18.28
MTR CMC4 1-1/8” 2-1/2” $21.97
MTR CMC5 1-1/4” 2-1/2” $18.28
MTR CMC7 1-1/2” 3” $21.99
MTR CMC8 1-3/4” 3-1/2” $31.53
MTR CMC9 2” 3-1/2” $33.42

Zinc Pencil Anodes w/ Brass Plugs

T21 Diver DOKA ORDER NO. PLUG I.P.S. ZINC DIMENSION PRICE
MTR CME00C 1/8” 1/4” x 2” $4.26
ORDER NO. LENGTH WIDTH HOLE CENTER PRICE MTR CME0C 1/4” $5.02
MTR CME1C 3/8” 3/8” x 1-3/4” $9.40
MTR CMT20 3-1/2” 1-3/4” 1-1/4” $6.39 MTR CME2C 1/2” 1/2” x 2”
MTR CMT21 1-5/8” $15.87 MTR CME3C 3/4” 5/8” x 2” $12.76
MTR DIVER 5-1/4” 2” 2” x 9” $123.24 3/4” x 2” $16.37
MTR DIVERMINI 1-1/4” x 4-1/4” $32.06
MTR DOKA 12” 6” 1-13/16”
MTR M25 3-7/8” $8.58
MTR MZ404 6” 4” N/A $46.37
MTR MZ406 $46.33
MTR N1 3-1/4” 1-1/4” 5” $99.51
MTR ZHC2 1/2” $29.76
MTR ZHC3 9-1/4” 3-3/8” 2-7/8” $38.26
MTR ZHC5 3-1/4” $42.44
MTR CMZD72BM 9-1/4” 3-3/8” 4-3/8” $69.01
MTR CMZD56 8-3/4” $142.88
8-5/8” 4-1/4” N/A $28.95 Zincs Only

8-1/2” 3-5/32” ORDER NO. ZINC DIMENSION PRICE
5-3/4” 2-1/2” MTR CME00Z 1/4” x 2” $1.27
MTR CME0Z $1.86
6-1/4” 2-3/4” MTR CME1Z 3/8” x 1-3/4” $2.70
MTR CME2Z 1/2” x 2” $3.28
8” 4” MTR CME3Z 5/8” x 2” $4.14
3/4” x 2”
18” 4”

4” dia.

ZINCS/ANODES 733

Mercury Aluminum
Verado O/B Anode Kits

CM880653A CM892227A

ORDER NO. DESCRIptION pRICE
MtR CMVERADO4KA 4 cylinder kit $46.44
MtR CMVERADO6KA 6 cylinder kit $62.89
MtR CM880653A $15.29
MtR CM892227A Verado Manifold Anode $7.31
Verado Trimwedge Anode

Mercuiser Sterndrive Anode Kits

All Kits include
• Fastening Hardware
• Installation instructions
• All anodes required for 100% protection
• 2004-up Bravo III’s require Bravo3 add on kit

Alpha Gen I Alpha Gen II Bravo 1
Bravo 3 Kit late models
Aluminum Anode Kits

ORDER NO. DESCRIptION pRICE
MtR CMALpHA1KItA Alpha Gen I $35.29
MtR CMALpHAKItA Alpha Gen II $64.48
MtR CMBRAVO1KItA Bravo I $49.72
MtR CMBRAVO23KItA Bravo 2 & 3 $43.71
MtR CMBRAVO3KItA $56.58
Bravo III 2004-present
pRICE
Magnesium (Freshwater Only) Kits $115.10
$105.71
ORDER NO. DESCRIptION $94.48
MtR CMALpHAKItM Alpha Gen II $120.15
MtR CMBRAVO1KItM Bravo I
MtR CMBRAVO23KItM Bravo 2 & 3 pRICE
MtR CMBRAVO3KItM $68.47
Bravo III 2004-present $60.83
$57.32
Zinc Anode Kits $64.58

ORDER NO. DESCRIptION Bravo 2 & 3
MtR CMALpHAKItZ Alpha Gen II
MtR CMBRAVO1KItZ Bravo I
MtR CMBRAVO23KItZ Bravo II & III
MtR CMBRAVO3KItZ
Bravo III 2004-present

734 ZINCS/ANODES Volvo DpH/DpR Kit for
DpH/DpR Volvo Drives
Aluminum Anode Kits
for Yamaha Outboards

ORDER NO. MAtERIAL pRICE
MtR CMDpHKItA Aluminum $33.67
MtR CMDpHKItZ $32.10
Zinc

Volvo SXA Aluminum Kit Fits
Volvo SX-A/DpS Drive

ORDER NO. pRICE
MtR CMSXAKItA $29.39

GROUpER

Clip to grounding strap where possible.
* IMPORTANT* Do not connect to battery

ORDER NO. DESCRIptION pRICE ORDER NO. MAtERIAL pRICE
MtR CMY150KItA Fits Yamaha 150-200HP $36.23 MtR GROUpER Zinc $87.45
MtR CMY150CRKItA Fits Yamaha 150-200HP Counter Rotation $32.00 MtR GROUpERA $49.35
MtR CMY2250KItA Fits Yamaha 200-250HP $37.74 Aluminum
MtR CMY200300KItA Fits Yamaha High Performance 200-30HP $37.59

Add on Aluminum prop Nut Anode Volvo SX Aluminum
Anode Kit
Provides Extra Corrosion protection for Mercruiser Bravo III Drives
2003 and older. Kit includes internal brass nut, anode, and bolt.

ORDER NO. DESCRIptION pRICE ORDER NO. pRICE
MtR NDAF14UNS Prop Nut Kit $69.47 MtR CMSXKItA $60.31
MtR CMpNAD $21.41
Replacement anode

ZINCS/ANODES 735

Zinc Electrolysis ORDER NO. SHaFt Std. PriCe Zinc Electrolysis
Eliminators SiZe BOX Eliminators
CAM X0 1/2”
For Shaft CAM X1 3/4” For rudders
CAM X1A 3/4”
Copper Contact for CAM X2 7/8” 24 $14.41 ORDER NO. DIAMEtER CtN. pRICE
Permanent Ground CAM X3 1”
CAM X4 1-1/8” 24 $10.98 CAM R1 1-7/8” — $4.46
CAM X5 1-1/4”
CAM X5A 1-1/4” 24 $15.96 CAM R2 2-13/16” 25 $12.67
CAM X6 1-3/8”
CAM X7 1-1/2” 24 $10.65 CAM R3 3-3/4” 20 $18.10
CAM X8 1-3/4”
CAM X9 2” 24 $11.97 CAM R4 5” 8 $32.84
CAM X10 2-1/4”
CAM X11 2-1/2” 24 $13.80 CAM R5 5-1/8” 6 $48.23
CAM X12 2-3/4”
CAM X13 3” 24 $14.14 Brass Bushing for Perma- CAM R7 6-1/2” 2 $73.52
nent Ground

12 $23.07

12 $18.27 Donut Collars

12 $18.50 O.D.
DIA.
8 $28.99 ORDER NO. SHaFt 2-1/8” WIDtH CtN. pRICE
2-1/8”
tear Drop – for hull 8 $30.06 CAM C1 3/4” 2-1/2” 1” — $12.67
CAM C2 7/8” 2-1/2” 1” — $12.67
4 $63.76 CAM C3 1” 2-1/2” 1-1/4” — $17.26
CAM C4 1-1/8” 1-1/4” — $17.26
ORDER NO. LENGtH CtN. pRICE 4 $61.83 CAM C5 1-1/4” 3” 1-1/4” — $17.26
CAM C6 1-3/8” 3” 1-1/4” — $20.75
CAM t20 3-1/2” 50 $6.52 4 $86.55 CAM C7 1-1/2” 3-1/2” 1-1/4” — $20.75
CAM C8 1-3/4” 3-1/2” 1-3/8” — $28.74
CAM t21 5-1/4” 25 $15.24 4 $74.22 CAM C9 2” 5” 1-3/8” — $28.74
CAM C12 2-1/2” 1-1/2” 5 $50.04
plate For Hull

Copper Contact for
Permanent Ground

BNt1

A24 A25

trim tab Zinc

Designed to mount on Bennett Trim Tabs where the actuator mounts to
the plane. The bolts holding the actuator to the plane must be removed
and the zinc installed using the same bolt holes and the long bolts
(included). These are priced and used per pair with the bolts included.

A30 A90 ORDER NO. pRICE
CAM BNt1 $22.02

A40 N1

ORDER NO. LENGtH WIDtH tHICKNESS WEIGHt CtN. pRICE

CAM A24 4-3/4” 2” 3/4” 12 oz. 25 $9.32 B-12

CAM A25 9-1/4” 3-3/8” 3/4” 3-1/4 Ib. 10 $44.34 Tapered zinc anode with two cast in 7/16” I.D. bronze bushings.
Nominal weight: 9 Ibs.
CAM A30 6-1/4” 2-3/4” 5/8” 2 Ib. 25 $19.11

CAM A40 7-1/2” 2-3/4” 1/2” 2-1/2 Ib. 10 $19.15

CAM A90 9-1/4” 3-3/8” 53/64” 5 $44.43 ORDER NO. pRICE

CAM N1 8-5/8” 3-3/16” 1/2” 10 $43.87 CAM B12 $108.64

B-6 B-24

Rectangular zinc anode with two • Tapered zinc anode with two
cast-in 7/16” I.D. Bronze bushings. cast-in 7/16” I.D.
Nominal Weight: 6 lbs.
• Bronze bushings.
ORDER NO. pRICE • Nominal weight: 23 lbs.

CAM B6 $65.22 ORDER NO. pRICE
CAM B24 $198.50

736 ZINCS/ANODES

For Mercury Outdrives 806189 ALpHA 815933 821630 BRAVO
& Outboards 821631 42121A2
825271
76214-5 76214-4 (No threads) 34127

A76214 31640

46399 C89949 34762 826134
817373 818298 C55989
ORDER NO. pRICE
43994A 822777 806190 BRAVO CAM 31640 $12.69
CAM 34127 $14.95
806188 BRAVO 806105 ALpHA 822157 823912 823913 CAM 34762
98432 CAM 42121A2 $6.04
Anode Mounting Bolt CAM 43396 $8.80
CAM 43994A $21.75
For 31640, A76214, 46399A1, & CAM 46399 $28.52
822777A1 7/16” x 1-3/4” Allen head CAM C55989 $13.29
cap screw CAM A76214 $3.50
CAM 762144 $10.94
43396 CAM 762145 $10.94
CAM C89949 $10.94
809660 CAM 98432 $40.09
809664 CAM 806105 $15.02
809666 CAM 806188 $16.22
809670 CAM 806189 $14.86
CAM 806190 $3.56
CAM 809660 $6.73
CAM 809664 $9.54
CAM 809666 $19.78
CAM 809670 $22.75
CAM 815933 $27.01
CAM 817373 $16.67
CAM 818298 $16.66
CAM 821630 $13.45
CAM 821631 $17.34
CAM 822157 $28.93
CAM 822777 $11.38
CAM 823912 $16.52
CAM 823913 $3.69
CAM 825271 $3.69
CAM 826134 $7.17
$7.28

ORDER NO. pRICE

SIE 186245 $3.49

ZINCS/ANODES 737

For OMC Outdrive

C980756 987067 367 C393023 ORDER NO. CtN. pRICE
CAM 367 20 $14.54
986158 COBRA 984513 COBRA 38554112 983494 COBRA CAM C393023 20 $15.66
CAM 397768 - $14.39
CAM C980756 20 $25.83
CAM 983494 10 $40.51
CAM 983952 5 $54.87
CAM 984513 5 $31.50
CAM 984547 4 $39.67
CAM 986158 5 $15.91
CAM 987067 - $14.71
CAM 3854130 - $23.78
CAM 38554112 - $35.98

397768 KING COBRA 984547 COBRA 983952 COBRA 3854130

Force Outboard Anodes

*17264 *98432 ORDER NO. H.p. MODEL/YR. pRICE
CAM 17264 60 & 75 H.P. 1995 and Newer $11.99
CAM 98432 20-25 Outboard 1984 and Newer $15.02
CAM 822157 40 to 50 H.P. $11.38
CAM 825271 30 and 50 H.P. 1996 $7.17
CAM 826134 90 to 120 H.P. 1996 and Newer $7.28

*822157 826134 825271

For Johnson & Evinrude Outboards

ORDER NO. H.p. MODEL YEAR StD pRICE
CAM C392123 10 $33.15
CAM C393023 50, 75 1982 to Present 10 $15.66 C173 397768
CAM 392462 1984 to Present 10 $35.91 398331 433580
CAM 395780 275 - $13.92 C392123 392462
CAM 398331 8 Cylinder Outboards - $16.41
CAM 397768 1985 to Present - $14.39
CAM C173 For All Outboards $9.17
CAM 431708 40 H.P. thru V8 - $14.84
CAM 433580 1988-91 $19.86
CAM 434029 25-35 $17.35
-
-

434029 431708 C393023 395780

738 ZINCS/ANODES

yamaha

6H1-45251 6G5-45251 664-45371 61A-45371

688-45371, 6J9-45371 688-45371-02 6K1-45371-02
6E5-45371-01 68845251 Counter Rotation

For Yamaha Outboards

ORDER NO. H.p. CtN. pRICE
$4.86
CAM 6E545251 115-200 - $1.82
-
CAM 68845251 40-90 5 $43.75
5 $19.07
CAM 68845371 90-200 5 $25.55
10 $24.65
CAM 66445371 50-25 10 $18.92
5 $15.68
6K1-45371-00 6E5-45251 CAM 6884537102 70 5 $44.64
Counter Rotation Only 5 $44.64
CAM 6G545251 115-200 5 $16.62
- $25.82
CAM 6J945371 150-200
- $5.64
CAM 6H145251

CAM 6K14537100

CAM 6K14537102

CAM 61A45371 225-250

SIE 186246 CAM 5512587E01 90

trim tab Bolt SIE 186246 Trim tab
Replaces 90105-10M00-00 bolt
5512587E01

For Suzuki Outboards

ORDER NO. H.p. CtN. pRICE
- $8.48
CAM 5532095310 55-140 5 For Nissan &
- $11.54 tohatsu Outboards
CAM 5512587D00 150-200 $9.07
$8.81
CAM 5512594502 115-140 $4.86

CAM 5512594400 90 $25.82 55125-87D00 55125-94400
CAM 4181087D00

CAM 5512587E01 90

CAM 348602170M

41810-87D00 55320-95310 55125-94502 55125-87E01 ORDER NO. H.p. pRICE
CAM 348602170M 8-18 $10.21

For Honda Outboards

ORDER NO. pRICE 06411-ZW1-000
CAM 06411ZV5000 $16.20
CAM 06411ZW1000 $44.14 06411-ZV5-000
CAM 41107ZV5000 $19.10
CAM 41109ZW1B00 $15.38 41109-ZW1B-00

41107-ZV5-000

For Yanmar Marine Engines ZINCS/ANODES 739

Zinc Acorn Nuts Zincs for
Maxi-prop propellers

ORDER NO. pRICE ORDER NO. pRICE
CAM ZpC1 $13.90 CAM C272100 $10.17
CAM ZpC2 $18.69
CAM ZpC3 $30.32

Thread Size Length Width Part No. Sea Strainer Zinc ORDER NO. SHAFt SIZE DESCRIptION pRICE
3/4-10 2-1/8” 1-1/2” ZPC-1 CAM 63M 3/4” – 1-1/8” 2001 and older $7.91
3/4-10 2-15/16” 1-7/8” ZPC-2 CAM 63M2 3/4” – 1-1/8” $7.91
3/4-10 3-1/16” 2-7/32” ZPC-3 CAM 63M3 3/4” – 1-1/8” 2002 only $7.91
CAM 70M 1-1/4” – 1-3/8” 2003 and up
ORDER NO. LENGtH WIDtH CENtER DIStANCE pRICE CAM 70M2 1-1/4” – 1-3/8” 2001 and older $11.37
BEtWEEN HOLES CAM 70M3 1-1/4” – 1-3/8” $11.37
CAM 83M 1-1/2” – 1-3/4” 2002 only $11.37
CAM SZ1 3-7/8” 1-1/2” 1-1/2” $6.65 2003 and up $22.08
CAM DOK 3-3/8” 2003 and older
1-1/4” 1-27/32” $5.54

plates for Hull ORDER NO. pLUG I.p.S. ZINC pRICE
3/4”x3/4” $16.44
Length Width Thickness CAM 6L2016 3/4” 1/2”x1-5/8”
6-1/4” 2-3/4” 3/4” 3/8”x2-1/2” $8.33
CAM 6L2280 3/8” 5/8”x3” $6.18
ORDER NO. pRICE $11.22
CAM ZHC3 $38.71 CAM 6L2283 1/4”

CAM 6L2289 1/2”

Length Width Thickness Length Width Thickness For GM Marine Engines

8” 4” 3/4” 15” 3” 1/2” ORDER NO. pLUG I.p.S. pRICE
CAM 8515850 3/4” $26.46
ORDER NO. pRICE ORDER NO. pRICE CAM 8517479 1/2” $20.80
CAM ZHC5 $63.11 CAM ZHC15 $171.33

Collars for Volvo Outdrive

ORDER NO. MODEL CtN. pRICE

CAM V17 250-270 - $11.00 838929 V18 875821

CAM V18 270T-280 10 $22.53

CAM 832598250 250-270 20 $21.83

CAM 852835 290B 10 $47.26

CAM 875821 Duo Prop 5 $26.81

CAM 838929 $4.57

CAM 823661 Diesel — $6.04

V17 823661 852835 832598250

Zinc Grouper

comes with 10 ft. galvanized wire rope and an
electrical connector with Instruction sheet
enclosed. Nominal weight: 6 Ibs.

Zp-2 Dp-1

Zinc plate 6” x 12” x 1/2” Nominal weight: 9 Ibs.
Nominal weight: 9 Ibs. CAST ZINC CANNOT BE BENT
CAST ZINC CANNOT BE BENT
Length Width Thickness ORDER NO. pRICE ORDER NO. pRICE
ORDER NO. pRICE 11-1/2” 5-1/4” 5/8” CAM Dp1 $111.50 CAM Gp1 $104.18
CAM Zp2 $96.43
(diver’s plate)

740 ZINCS/ANODES

Zinc & plug ORDER NO. pLUG I.p.S. ZINC pRICE Zincs Only ORDER NO. pRICE
INCHES
For Marine Engines $3.65 CAM E00ZINC $0.95
pure Zinc pencils With Bronze plug 1/4x2 $3.31
CAM E00COMp 1/8” 1/4x1/2 $5.62 CAM E00AZINC $0.66
CAM E00ACOMp 1/8” 3/8x1-3/4 $5.62
CAM E0COMp 1/4” 3/8x3/4 $8.20 CAM E0ZINC $1.46
CAM E0BCOMp 1/4” 1/2x2 $8.20
CAM E1COMp 3/8” 1/2x1-3/4 $8.20 CAM E0BZINC $1.46
CAM E1DCOMp 3/8” 1/2x1-1/2 $8.20
CAM E1ECOMp 3/8” 1/2x1-1/4 $8.20 CAM E1ZINC $2.09
CAM E1FCOMp 3/8” 1/2x1 $11.74
CAM E1GCOMp 3/8” 5/8x2 $16.94 CAM E1DZINC $2.09
CAM E2COMp 1/2” 3/4x2 $17.72
CAM E3COMp 3/4” 3/4x3-3/8 $18.18 CAM E1EZINC $2.09
CAM E4COMp 3/4” 3/4x3-5/8
CAM E5COMp 3/4” CAM E1FZINC $2.09

CAM E2ZINC $2.44

CAM E3ZINC $3.24

Aluminum SecureCore Complete Reduced Clearance (donut) AnodesAluminum
pencil Anode with plug
ORDER NO. SHAFt SIZE O.D. DIA WIDtH pRICE
ORDER NO. pLUG Npt ANODE DIAM. ANODE LENGtH pRICE pRF RC0875A 7/8” 2-1/8” 1” $8.94
pRF CE00 1/8” 1/4” 2” $4.61 pRF RC1000A 1” 2-1/2”
pRF CE0 1/4” 3/8” $5.69 pRF RC1125A 1-1/8” 2-1/2” 1-1/4” $12.80
pRF CE1 3/8” 1/2” 1-3/4” $6.99 pRF RC1375A 1-3/8” 3” 1-1/4” $12.52
pRF CE1E 3/8” 1/2” 2” $6.91 pRF RC1500A 1-1/2” 3” 1-1/4” $15.35
pRF CE1F 3/8” 1/2” $6.83 1-1/4” $15.35
pRF CE2 1/2” 5/8” 1-1/2”
1-1/4” $11.78

2”

Aluminum Hull plates Aluminum Rudder/trim tab

1-7/8”, 2-13/16”, 3-3/4”, 5”

With Wear Indicator

ORDER NO. SIZE pRICE
$4.23
pacemaker Hull plate Hull plate Divers plate pRF R1875A 1-7/8” $8.53
9.25” x 3.375” x .75” 8.625” x 4.25” x 1” 12” x 6” x .5”
pRF R2813A 2-13/16” $11.66
ORDER NO. pRICE ORDER NO. pRICE ORDER NO. pRICE pRF R3750A 3-3/4” $23.58

pRF H404A $27.17 pRF H406A $54.95 pRF HDDRA $36.64 pRF R5000A 5”

Aluminum ORDER NO. SIZE pRICE Benett trim tab t20A & t21A Small teardrop Anode
Streamlined Collar pRF C0750A 3/4” $8.43 Aluminum
Anodes pRF C1250A 1-1/4” Anode
pRF C1375A 1-3/8” $10.09
pRF C1500A 1-1/2” $13.10 ORDER NO. LENGtH HOLE CENtERS pRICE
pRF C1750A 1-3/4” $13.10 $7.06
pRF C2000A 2” $22.09 ORDER NO. pRICE pRF t21A 5” 1.6” $6.23
pRF C2250A 2-1/4” $21.10 pRF HBNtA $21.98
pRF C2500A 2-1/2” $47.13
pRF C2750A 2-3/4” $49.61
pRF C3000A 3” $62.01
$57.06

pRF t20A 3.38” 1.3”

Aluminum Hull Anodes(HM24A) Aluminum - Hull plate (HC3A)
Length: 6.25” Width: 2.75”
Aluminum - Hull plate
Length: 4.40” Width: 2.10” ORDER NO. pRICE

ORDER NO. pRICE pRF HC3A $18.62

pRF HM24A $6.22 Boater Dream Anode
High performance
Aluminum - Hull plate (HM25A) Aluminum - Doka Strainer Anode aluminum Power Series
Length: 9.25” Width: 3.37” (HDOKA) Length: 3.25” (83mm) replacement
Width: 1.2” (32mm) for Diver’s Dream.
ORDER NO. pRICE
pRF HM25A $27.05 ORDER NO. pRICE ORDER NO. pRICE

pRF HDOKA $4.37 pRF HYAA $70.85

ZINCS/ANODES 741

Mercury Aluminum Anodes

Performance Metal anodes are manufactured to the highest quality levels to ensure the best possible corrosion protection.
Performance Metal anodes are manufactured to meet the same specifications as original equipment (MIL A 18001 for the Zinc and MIL A24779 for
the Aluminum Indium anodes)

PRF 00046A PRF 00049A PRF 00268A

PRF 00041A PFR 00044A

PRF 00043A PRF 00045A PRF 00093A PRF 00042A
PRF 00047A PRF 00050A
ORDER NO. DESCRIptION pRICE PRF 00048A
$19.21 PRF 00052A PRF 00163A PRF 00051A
pRF 00041A Cavitation Plate Alpha (821629T1) $6.38 PRF 00094A
$18.19
pRF 00042A Drive Trim Cylinder Alpha (806189T 1) $13.52
$17.05
pRF 00043A Bearing Carrier Alpha (806105T 1) $18.86
$10.80
pRF 00044A Trim Tab Anode (31640T 4) $14.77
$14.39
pRF 00045A Gimbal Housing Block (82163 IT 1)
$11.31
pRF 00046A *Cavitation Plate Bravo (821630T 1)
$8.53
pRF 00047A Drive Trim Cylinder Bravo (806190T 1) $13.96
$14.06
pRF 00048A *Bearing Carrier Bravo (806188A 1)
$7.23
pRF 00049A Trim Tab Anode Flat (76214T 5) $12.38
$14.39
pRF 00050A Gimbal Hsg Bolt
(2 per kit) (55989T 9)

pRF 00051A Side Pocket Anode* (826134T)

pRF 00052A Power Trim Anode (818298T 1)

pRF 00093A Manifold Anode (880653)

pRF 00094A Trim Cylinder Verado (893404)

pRF 00163A Prop Anode (865182A 1)

pRF 00268A Trim Tab Flat Recessed (76214 4)

* Does not fit the 2006 Bravos

Aluminum Anode Kits for ORDER NO. pRICE
Mercury Outdrives pRF 10165A $56.47
pRF 10059A $59.05
These are complete anode kits to replace all factory installed pRF 10060A $49.07
anodes found on the transom and drive unit. Available for pRF 10061A $41.27
Alpha Gen I and II, Bravo I, II, and III drives. pRF 10108A $44.97
pRF 10205A $35.27

Bravo III Alpha I Gen II Bravo I Bravo II, III Alpha I Gen I Alpha I Gen I
2004-Present PRF 10059A PRF 10060A PRF 10061A PRF 10108A (w/o power steering)
PRF 10165A
PRF10205A

742 ZINCS/ANODES Mercury Retrofit prop Anode Kit

OMC Cobra Gear Case A retrofit kit for Mercruiser Bravo III 2003 and
Aluminum Anodes below. The brass nut fits on the prop shaft and
the replaceable Navalloy anode provides
Cobra Rear Gear Case additional protection for the drive.
(00201a)
Replaces J/E #s ORDER NO. DESCRIptION pRICE
436745/393023 pRF 10195A Kit $64.50
pRF 00196A $14.79
ORDER NO. pRICE Replacement Anode
pRF 00201A $11.03
Mercury Aluminum
Side Mounted (00141A) Verado 4 Cylinder Kit
Replaces J/E #s
123009/327606/173029 ORDER NO. pRICE
pRF 10202A $44.55
ORDER NO. pRICE
pRF 00141A $10.77 Mercury Aluminum
Verado 6 Cylinder Kit
Aluminum Anodes for Johnson/Evinrude

Johnson/Evinrude 90-225 hp (1991 and later)

ORDER NO. DESCRIptION pRICE ORDER NO. pRICE
pRF 10221A Kit 433580 & 393023 $23.06 pRF 10203A $60.29
pRF 00143A Transom Anode 433580 $16.98

Bow thruster Anodes For BOW60/75/95 For BOW220/285
Supplied with two stainless steel Allen head Fitted to propeller hub centre. Supplied
countersunk set screws. complete with cap head Allen screw.

ORDER NO. pRICE ORDER NO. pRICE
VEt SEt0150 $56.00 VEt SEt0152 $66.75

For BOW35/55 For BOW125/130/160 For BOW23A/50 — All Stern
Supplied with two stainless steel Allen Fitted to propeller hub centre. Supplied Supplied complete with retaining set
head countersunk set complete with cap head Allen screw. bolt. Screws into the stainless drain
screws. plug socket under the lower leg unit.
ORDER NO. pRICE
ORDER NO. pRICE VEt SEt0151 $62.50 ORDER NO. pRICE
VEt SEt0149 $51.75 VEt SEt0153 $47.50

ZINCS/ANODES 743

Volvo aluminum anodes

SX, DpS-A, SX-A & Dp-X Drives

transom plate SX Side Mounted Anode - Gimbal plate - SX Anodic Bar (00118A) Cube Anode (00158A)
(00162A) SX Dp-X (00110A) (00117A) Replaces Volvo Replaces Volvo
Replaces Volvo Replaces Volvo Replaces Volvo part no. 872139 part no. 873395
part no. 3855411 part no. 872793 part no. 3854130
ORDER NO. pRICE
ORDER NO. pRICE ORDER NO. pRICE ORDER NO. pRICE pRF 00118A $23.98 ORDER NO. pRICE
pRF 00162A $34.11 pRF 00117A $27.85 pRF 00158A $14.56
pRF 00110A $8.98
Duo prop 280Dp
& 290Dp transom Anode (00156A) Gearhouse Anode (00157A)
Replaces Volvo Replaces Volvo
part no. 3841427 part no. 3888813

ORDER NO. pRICE ORDER NO. pRICE
pRF 00156A $22.20 pRF 00157A $23.20

290 & 290 Dp 280, 290, Sp Drives 250, 270, 275, 285, 280, 280 Dp Drives

prop Ring - Duo prop (875821) Anodic Bar (00112A) prop Ring - V18 (00161A) Anodic Bar (00111A) prop Ring - V17 (00114A)
Replaces Volvo part no. 875821 Replaces Volvo Replaces Volvo Replaces Volvo Replaces Volvo
part no. 875815 part no. 832598 part no. 875805
part no. 852835
ORDER NO. pRICE ORDER NO. pRICE ORDER NO. pRICE
ORDER NO. pRICE ORDER NO. pRICE pRF 00161A $18.90 pRF 00111A $21.83 pRF 00114A $11.36
pRF 00116A $21.78 pRF 00112A $26.01

Aluminum Anode Kits for ORDER NO. DESC pRICE
Volvo Outdrives pRF 10276A
pRF 10274A 290 Kit $37.83
Volvo Aluminum Anode kits come with pRF 10289A
mounting hardware. These anodes have the pRF 10278A 280 Kit $36.85
patented wear indicator that appears as it pRF 10275A
wears, telling you when it is time to change pRF 10277A DPS/SX-A Kit $37.83
your anodes.
SX Kit $60.39

280 DP Kit $37.60

290 DP Kit $38.28

Volvo 290 Volvo 280 DPS/SX-A Volvo SX Volvo 280DP Volvo 290DP
PRF 10276A PRF 10274A PRF 10289A PRF 10278A PRF 10275A PRF 10277A

744 ZINCS/ANODES

Side Mounted Yamaha Aluminum Anodes trim tab
Counter Rotating
Replaces Yamaha #6E0-45251-11 trim tab
Replaces Yamaha
ORDER NO. pRICE Replaces Yamaha #6K1-45371-00
pRF 00119A $10.77 #664-45371-01
ORDER NO. pRICE
trim tab Counter Rotating ORDER NO. pRICE pRF 00121A $17.69
pRF 00120A $15.57
Replaces Yamaha
#6E5-45371-01 trim tab Block
60–90hp
ORDER NO. pRICE Replaces Yamaha
pRF 00122A $17.69 Replaces Yamaha #6E5-45251-00
#688-45371-02
trim tab 150–175hp ORDER NO. pRICE
ORDER NO. pRICE pRF 00124A $11.17
Replaces Yamaha #6J9-45371-01 pRF 00123A $18.14

transom Anode transom Anode

Replaces Yamaha #6H1-45251-02 Replaces Yamaha #6G5-45251-02

ORDER NO. pRICE ORDER NO. pRICE ORDER NO. pRICE
pRF 00125A $24.64 pRF 00126A $13.89 pRF 00127A $17.84

Block trim tab 200–250hp trim tab 150–175hp
4-Stroke Counter Rotating
Replaces Mercury
#688-45251-01 Replaces Yamaha Replaces Yamaha
#61A-45371-00 #6K1-45371-02
ORDER NO. pRICE
ORDER NO. pRICE ORDER NO. pRICE
pRF 00128A $9.21
pRF 00180A $26.17 pRF 00181A $24.64

Aluminum Anode Kits for Yamaha Outboards. ORDER NO. DESCRIptION pRICE
pRF 10182A 200-250HP 4 stroke $36.77
Comes with mounting hardware. Anodes have wear indicator that pRF 10184A 150-175 counter rotation $36.22
appears as the anode wears. pRF 10183A $34.82
pRF 10186A 150-175HP $37.96
pRF 10187A 200-300HP $27.36
60-90HP 2 stroke

10182A Yamaha 10184A Yamaha 10183A 10186A Yamaha 10187A
200-250HP 150-175HP Yamaha 200-300HP 60-90HP
Four Stroke Counter Rotation 150-175HP Two Stroke

)

Hand-Poured vs. Die Cast

B&S Marine Anodes, formerly Bossier & Sweezey zincs,

has proudly manufactured the highest quality hand-poured zincs for
over 40 years. Hand-pouring ensures that we maintain the mil-spec standard straight
through to the finished product. In hand-poured zinc, size for size, there is a greater area
exposed to corrosion than in die cast anodes. More area means more protection.
Since many of our inboard anodes are heavier than other brands, you’re getting the most
value for your dollar. B&S Zincs wear evenly and last longer, assuring the highest level of
galvanic protection for pleasure and commercial vessels. Hand poured zinc has a higher
degree of porosity due to its molecular make-up than die cast zinc.

RUDDER BUTTON ZINC STREAMLINE ZINC SHAFTS

ORDER NO. STD. CTN. DIMENSION PRICE ORDER NO. STD. CTN. DIMENSION PRICE
BOS R2 25 3" $20.88 BOS X1 24 ¾" $17.61
BOS R3 16 4" $30.82 BOS X3 24 1" $21.74
BOS R4 8 5" $52.84 BOS X5A 24 1¼" $26.94
BOS X6 12 1⅜" $31.10
BOS X7 12 1½" $31.10
BOS X8 8 1¾" $47.78
BOS X9 8 2" $47.78

DIVER’S ZINC PLATE ZINC PLATE

ORDER NO. STD. CTN. DIMENSION PRICE ORDER NO. STD. CTN. DIMENSION PRICE
BOS DP1 5 12" x 6" x 12" $99.07 BOS ZP2 10 12" x 6" x ½" $99.07

WELD-ON ZINC HULL ZINC

ORDER NO. STRAPS DIMENSION PRICE ORDER NO. STD. CTN. DIMENSION PRICE
BOS W12 2 12" x 3" x 1¼" $116.96 BOS B12 4 9" x 4⅜" x 1½" $104.57
BOS A90 5 9¾” x 3⅜" x 5 3/64" $41.83

FASTENERS 747

Bulk Fasteners

Phillips Oval Head Phillips Pan Head Phillips Oval Head Phillips Flat Head
18-8 Stainless Steel 18-8 Stainless Steel 18-8 Stainless Steel Stainless Steel Tapping
Tapping Screws Tapping Screws Machine Screws Screws

100 Per Box 100 Per Box 100 Per Box 100 Per Box

SIZE PRICE ORDER NO. SIZE PRICE
ORDER NO.
$7.00 FAS 656 4x1/2 $4.00
6-32 $8.50 FAS 658 4x3/4 $5.50
$10.50 FAS 659 6x1/2 $5.00
FAS 690 1/2 $10.50 FAS 660 6x3/4 $6.00
$12.00 FAS 660A 6x1 $7.00
FAS 691 3/4 FAS 660B 6x1-1/4 $8.50
$9.50 FAS 660D 6x1-1/2 $10.50
FAS 692 1 $11.50 FAS 660E 6x1-3/4 $16.25
$15.00 FAS 661A 8x5/8 $8.00
ORDER NO. SIZE PRICE ORDER NO. SIZE PRICE FAS 691A 1-1/4 $17.00 FAS 661 8x3/4 $8.75
$22.50 FAS 662 8x1 $10.00
$5.50 4 $4.75 FAS 691B 1-1/2 FAS 662A 8x1 1/4 $12.50
$6.50 $6.00 $13.50
4 $6.00 8-32 $15.00 FAS 663 8x1-1/2 $14.00
$6.00 3/4 $18.00
FAS 631 1/2 $6.25 FAS 601 1/2 $6.50 FAS 692B $20.00 FAS 663A 8x1-3/4 $17.50
$6.50 $6.56 $23.00 FAS 663C 8x2 $17.50
FAS 630A 5/8 $6.25 FAS 601A 3/4 $8.00 FAS 693 1 $27.00
$9.00 FAS 601B 6 $11.00 $31.50 FAS 663B 10x1/2 $11.00
FAS 631A 3/4 $9.50 1/2 $11.50 FAS 693A 1-1/4 FAS 664 10x3/4 $10.00
6 $11.50 $17.50 $18.50
FAS 631B 1/2 FAS 601F 5/8 FAS 694 1-1/2 $22.50 FAS 665 10x1 $14.00
FAS 631C $7.50 $8.00 $28.50 FAS 665A 10X1-1/4 $17.00
5/8 $8.00 FAS 602 3/4 $8.50 FAS 694A 2 $35.00 FAS 666 10X1-1/2 $17.50
$9.50 $10.00 FAS 667 $23.00
FAS 632 3/4 $9.50 FAS 603 1 $12.00 10-24 $25.50 FAS 667A 10X2 $30.00
$11.00 $13.00 $27.50 FAS 668D 10X2-1/2 $15.00
FAS 633 1 $12.50 FAS 603B 1-1/4 $15.00 FAS 694C 3/4 $32.00 FAS 668A 12X3/4 $17.50
$15.00 $20.00 $40.00 FAS 668E $20.00
FAS 633A 1-1/4 $18.50 FAS 603C 1-1/2 $20.50 FAS 695 1 $36.00 FAS 669 12X1 $24.50
$20.50 $47.50 FAS 670 12X1-1/4 $32.50
FAS 633B 1-1/2 $30.50 FAS 603D 1-3/4 $11.00 FAS 695A 1-1/4 $55.00 FAS 670A 12X1-1/2 $46.50
FAS 633C 8 8 $11.00 $65.00 FAS 671 $50.00
3/8 $10.50 FAS 603A 1/2 $12.50 FAS 696 1-1/2 FAS 673 12x2 $30.00
$11.00 FAS 603E 5/8 $16.00 FAS 696A 1-3/4 FAS 674 12x2-1/2 $30.00
FAS 634 1/2 $13.75 $18.00 FAS 678 $37.50
$14.50 $20.50 FAS 697 2 FAS 677 12x3 $42.50
FAS 634B 5/8 $19.50 $28.00 FAS 679 14x1 $65.00
$20.00 FAS 604 3/4 $26.50 FAS 697A 2-1/2 14x1-1/4
FAS 634A 3/4 $25.00 $32.00 10-32 14x1-1/2
$29.00 FAS 605 1 $42.00 14x2
FAS 635 1 $33.00 14x3
$45.50 FAS 606 1-1/4 $17.50 FAS 698B 3/4
FAS 636 1-1/4 $19.50
$21.50 $21.00 FAS 699A 1
FAS 635A 1-1/2 $19.00 FAS 605A 1-1/2 $27.00
$21.50 $29.50
FAS 635B 1-3/4 $27.50 FAS 606A 1-3/4 $37.00 FAS 699B 1-1/2
$33.50 $62.00
FAS 637 2 $50.00 FAS 607 2 FAS 699C 2
FAS 607A 10 $26.00
FAS 637C 2-1/2 $29.00 1/2 $34.50 1/4-20
$32.00 $36.00
10 $37.50 $39.00 FAS 701A 3/4
$46.50 $46.50
FAS 637A 1/2 $76.00 FAS 607B 5/8 $53.00 FAS 702 1
$77.50
FAS 637B 5/8 FAS 608 3/4 FAS 702A 1-1/4

FAS 638 3/4 FAS 609 1 FAS 703A 1-3/4

FAS 639 1 FAS 610 1-1/4 FAS 703 1-1/2

FAS 640 1-1/4 FAS 611 1-1/2 FAS 704 2

FAS 641 1-1/2 FAS 610A 1-3/4 FAS 704A 2-1/2

FAS 640A 1-3/4 FAS 611A 2 FAS 705 3

FAS 641A 2 FAS 611D 2-1/2

FAS 640B 2-1/2 FAS 611B 3
FAS 611E 12
FAS 641B 3 1/2

12 Phillips Flat Head,

FAS 641C 3/4 FAS 611C 3/4 18-8 Stainless Steel Machine Screws

FAS 642 1 FAS 612 1 100 Per Box

FAS 642A 1-1/4 FAS 612A 1-1/4

FAS 643 1-1/2 FAS 613 1-1/2 ORDER NO. SIZE PRICE ORDER NO. SIZE PRICE
FAS 770 6/32x1 $8.75 $1575.500
FAS 644 2 FAS 614 2 FAS 772 8/32x3/4 $9.00 FAS 778A 10/3224x31 $23.50
FAS 773 8/32x1 $30.50
FAS 644A 3 FAS 774 8/32x1-1/2 $10.50 FAS 779 1/4-20x1 $33.50
FAS 774B 8-32x2 $17.50 $40.50
14 FAS 614A 3 FAS 774A 10/24x3/4 $22.00 FAS 779A 1/4-20x1-1/4 $65.00
FAS 615 14 FAS 775 10/24x1 $10.38 $47.50
FAS 646 1 3/4 FAS 776 10/24x1-1/2 $14.00 FAS 780 1/4-20x1-1/2 $63.00
FAS 777 10/24x2 $22.50
FAS 646A 1-1/4 FAS 616 1 FAS 778 10/24x3 $25.50 FAS 780A 1/4-20x1-3/4 $107.50
$57.50
FAS 647 1-1/2 FAS 781A 1/4-20x2-1/2

FAS 648 2 FAS 616A 1-1/4

FAS 649 3 FAS 617 1-1/2 FAS 781 1/4-20x2

FAS 617A 1-3/4 FAS 782 1/4-20x3

FAS 618 2 FAS 784 1/4-20x4

FAS 619 3

748 FASTENERS

18-8 S.S Phillips Pan Head Bulk Fasteners Cap Nuts 18-8
Machine Screw Stainless Steel
Lock Washer

ORDER NO. SIZE QTY. PRICE ORDER NO. SIZE QTY. PRICE ORDER NO. SIZE QTY. PRICE
PER BOX PER BOX PER BOX
$40.00
FAS 750 8/32x 3/4 100 $10.50 FAS 195 #6 100 $3.00 FAS 013 10-24 100 $52.50
FAS 196 #8 100 $4.00
FAS 751 8/32x1 100 $13.50 FAS 197 #10 100 $4.25 FAS 014 1/4-20 100
FAS 751A 8/32x1-1/4 100 $15.50 FAS 198 #1/4 100 $6.50
FAS 199 #5/16 100 $10.50
FAS 752 8/32x1-1/2 100 $19.00 FAS 199A #3/8 100 $17.50
FAS 754 10/24x3/4 100 $14.00 FAS 199B #1/2 50 $17.50

FAS 755 10/24x1 100 $15.50
FAS 755A 10/24x1-1/4 100 $18.00

FAS 756 10/24x1-1/2 100 $20.50 Finish Washer
FAS 757 10/24x2 100 $27.50
FAS 757B 100 $40.00 Fender Washer QTY.
FAS 758 10/24x2-1/2 100 $50.00 PER BOX
FAS 758B 10/24x3 100 $14.00 ORDER NO. SIZE PRICE
FAS 758C 10/32x3/4 100 $17.50
FAS 758G 10/32x1 100 $21.00 ORDER NO. SIZE QTY. PRICE FAS 410 #6 100 $3.80
FAS 758D 100 $35.00 PER BOX FAS 411 #8 100 $4.75
FAS 758E 10/32x1-1/4 100 $40.00 FAS 412 #10 100 $6.25
FAS 758F 10/32x1-1/2 100 $20.00 FAS 425 #10 X 11/16 100 $11.50 FAS 412A #12 100 $8.50
FAS 758H 100 $26.50 FAS 425A 3/16 X 1 100 $17.50 FAS 413 #1/4 100 $10.00
FAS 759B 10/32x2 100 $30.50 FAS 426 100 $32.00
FAS 760B 1/4-20x1/2 100 $38.00 FAS 426A 1/4 X 1-1/4 100 $17.00 Flat Washer
FAS 761B 1/4-20x3/4 100 $49.00 FAS 427 1/4 X 1 100 $37.50
FAS 761C 1/4-20x1 100 $59.50 FAS 428 100 $36.00
FAS 763B 1/4-20x1-1/2 100 $70.00 FAS 427A 5/16 X 1-1/2 50 $43.50
FAS 765 1/4-20x2 100 $87.50 3/8 X 1-1/2
1/4-20x2-1/2
1/4-20x3 1/2 X 2
1/4-20x3-1/2

18-8 S.S. Phillips Round Head ORDER NO. SIZE QTY. PRICE
Machine Screw PER BOX
Hex Nuts $1.75
QTY. 18-8 Stainless Steel FAS 190 #6 100 $3.25
PER BOX FAS 191 #8 100 $4.55
ORDER NO. SIZE PRICE FAS 192 #10 100 $5.00
FAS 192A #12 100 $6.00
FAS 760 1/4-20x1 1/2 100 $40.00 FAS 193 #1/4 100 $9.00
$77.50 FAS 194 #5/16 100 $11.50
FAS 761 1/4-20x2 100 $95.00 QTY. FAS 194A #3/8 100 $13.50
PER BOX FAS 194B #1/2 50 $10.00
FAS 763 1/4-20x3 100 ORDER NO. SIZE PRICE FAS 194C #7/16 50

FAS 314 6-32 100 $6.75 S.S License Plate Bolts
FAS 315 8-32 100 $7.50
FAS 316 10-24 100 $7.50
FAS 316A 10-32 100 $8.25
FAS 317 1/4-20 100 $12.50
FAS 318 5/16-18 100 $20.00
FAS 319 3/8-16 100 $26.00
FAS 319A 3/8-24 100 $47.50
FAS 319B 7/16-14 50 $25.50
FAS 320 1/2-13 50 $32.50
FAS 320A 1/2-20 50 $40.00

ORDER NO. SIZE QTY. PRICE
PER BOX $30.50
FAS 460 1/4-20”x5/8”
100