2016 Catalog PDF

TRAILER ACCESSORIES 199

546 Submersible Trailer Light Kit Tail Light Bracket - Galvanized

Kit provides all legal lighting and reflective equipment for any trailer less Use this taillight bracket for mounting standard DOT trailer
than 80” wide. Includes two 441 submersible stop and tail lights, two lights to your trailer.
108A side marker lights, 20’ harness kit, license bracket, all mounting
hardware and installation instructions. 4 per carton. Hot Dip Galvanized

ORDER NO. PRICE

CES 26057G $3.52

ORDER NO. DESCRIPTION PRICE Tail Light Protector

AND E546 Black $42.01 Added protection for fragile trailer tail lights. Mounts between the
existing tail light mounting brackets and the lamp using the two lamp
mounting studs. Mounting holes fit standard DOT brake/tail lamps. No
hardware required for installation.
• Aluminum tread
• Dimensions: 5-1/2” x 5-5/8” x .125”
Sold individually

ORDER NO. PRICE

CES 26051A $29.92

15” SlimLine LED - Stop, Tail,

540 Trailer Light Kit and Turn

Kit provides all legal lighting and reflective equipment for any trailer less • 11 LED Configuration • Impact Resistant
than 80” wide. Includes 2 multifunction stop and tail lights, 2 side marker
lights, 20’ wire harness, 48” trunk connector, license bracket, frame • 100,000 Hours of Service Life • Red
mounting clips, and complete mounting instructions. 4 per. ctn.
• Sealed Polycarbonate Light Bar • Dimensions:

• Energy Draw 250 Milliamps 15.50” L x 1.60” W x .80” D

• Mounted Vertical, Horizontal, or

45 Degrees

• Space / Channel Saver Design

ORDER NO. PRICE
INN 25044007 $29.11

Hylite LED Identification Light Bar

ORDER NO. DESCRIPTION PRICE • Rated @ 100,000 Hours of • Required for Trailers, Campers
Service Life and Trucks Over 80” in Overall
AND V540 Light Kit $42.71 Width
• 3 LED Configuration
• Shock and Vibration Proof • Dimensions:
• No Corrosion 13.56” L x 1.63” W x .75” D
• Impact Resistant
LED Rear Trailer Light Kit • Energy Draw 70 Milliamps
• 8.50” Mounting Centers
Super bright LED optics. 100,000 hour rated life. Submersible no bulb • Interchangeability with Most
breakage. Low AMP draw. Kit contains two multi-function LED stop,
turn and tail lights, license bracket, mounting and wiring hardware, and Manufacturers
complete mounting instructions. Rear legal lighting equipment for any
trailer less than 80” (2M) wide. Meets D.O.T. requirements. Roadside ORDER NO. DESCRIPTION PRICE
light contains auxiliary license light.
INN 22144007 Red LED w/Red Lens $30.21

15” 3 - LED Identification Light Bar

• Rated @ 100,000 Hours of • Interchangeability with Most

Service Life Manufacturers

• 3 Sonically Sealed Marker Lights • Required for Trailers, Campers

• 6 LEDs Total and Trucks Over 80” in Overall

• ABS Housing Width

• Shock and Vibration Proof • Dimensions:

• No Corrosion 15.00” L x 1.40” W x 1.19” D

• Impact Resistant

• Energy Draw 150 Milliamps

ORDER NO. PRICE ORDER NO. DESCRIPTION PRICE
AND V941 $77.50
INN 22044007 Red LED w/Red Lens $45.78

200 TRAILER ACCESSORIES

Sealed 3-Piece LED Identification Light Bar Waterproof LED ID Light Bar

Sealed stainless ID light bar for over 80” applications. Features sonically Light bar with three waterproof red lights. Stainless base with stud
sealed, waterproof light capsules. Single wire design grounds through mounting. 14-1/4” x 1-3/16” x 1-1/16”
mounting hardware. “Plug-n-go” ensures an easy, watertight connection to
the electrical harness. Red only.

ORDER NO. PRICE
OPT MCL97RK $37.17

Waterproof Identification Light Bars ORDER NO. PRICE
WSB 401567 $39.04
The best light bar available for boat trailers 80” or more in overall width.
Three fully submersible clearance lamps are fastened on 6” centers to this
stainless steel bar. 14-1/4” X 1-1/8” X 1”.

Waterproof LED Clearance/Side Marker Lights

Waterproof mini LED clearance/side marker light with single wire.
Self-grounding stud mounting with 1/4” required hole.
2-1/8” x 1-1/8” x 1-1/16”

ORDER NO. PRICE ORDER NO. DESCRIPTION PRICE
WSB 3315 $17.64 WSB 401566 Red $13.06
WSB 401565 $13.06
Amber

Bullet Sidemarker Light Submersible Light Bar

• 1” Round Light • Submersible identification bar light for over-80” applications
• Requires a 11/16” hole • Stainless steel bar is corrosion-resistant with three sealed lights
• P2 Rated • Pre-wired with 60” lead wire; grounds through mounting hardware
• Operates 9-16 Volts • Mounts on 8-1/2” centers. Available in red.
• Waterproof
• Shock Resistant
• Manufactured with SAE

approved polymers

ORDER NO. DESCRIPTION PRICE
INN 21611007 Amber / Amber Lens $11.68
INN 21644007 $11.68
Red / Red Lens

ORDER NO. PRICE
AND E1513RL $14.30

LED Mini-Sidemarker / Clearance Lights Submersible Identification Light Bar

• Single LED Configuration For Vehicles Over 80” Wide
• 100,000 Hours of Service Life
• Sealed Polycarbonate Lens and Housing Identification bar features three sealed lights on a black ABS plastic
• Shock and Vibration Proof bar. Complete wire harness included. Available in red only. Overall
• Energy Draw 50 Milliamps dimensions are 16” long x 1” wide.

Dimensions:
1.38” L x 2.50” W x .88” D

ORDER NO. DESCRIPTION PRICE

INN 20411827 Amber Lens w/ Chrome Trim Ring $15.93

INN 20444827 Red Lens w/ Chrome Trim Ring $15.93 ORDER NO. PRICE
AND E1503 $10.99
INN 20399021 2 Pin Male Plug Connector $1.98

TRAILER ACCESSORIES 201

Sealed Clearance and Side Marker Light LED Sidemarker / Clearance Light w/ Reflectivity

LEXAN® lens and housing are sonic welded • Single LED Configuration
into a single unit for maximum service. • 100,000 Hours of Service Life
Complete with mounting brackets • Snap-On/Off Polycarbonate Lens
and electrical connections. • Shock and Vibration Proof
• 6” Wire Leads

ORDER NO. DESCRIPTION PRICE Dimensions:
$6.58 2.63” L x 2.00” W x .75” D
AND E150KA Amber w/ Chrome Bracket $6.58
$5.81
AND E150KR Red w/ Chrome Bracket $5.81 ORDER NO. DESCRIPTION PRICE
INN 20211007 Amber $11.70
AND E150BKA Amber w/ Black Bracket

AND E150BKR Red w/ Black Bracket

Sealed Clearance and Side Marker Light Side Marker Lights

LEXAN® lens and housing sonically welded into a single unit for Features quick connect/disconnect
wiring method.
maximum service. A mounting bracket and electrical connection are

required to complete installation.

ORDER NO. DESCRIPTION PRICE ORDER NO. MOUNT COLOR PRICE
AND E150A Amber $3.93 WSB 3111
AND E150R Red $3.95 WSB 3113 Stud Amber $9.98
WSB 3131
WSB 3133 Stud Red $9.64
WSB 2423287
AND 150092 Surface Mount Kit $5.10 Ear Amber $7.61

Ear Red $7.61

Stud Mount Combination Clearance Reflector Light Lens Repl. Red $0.45

Side Marker Light

Single stud, 2-3/4” x 2-1/8” x 1” combination side marker light and
reflector. Available with red or amber lens with black housing.

ORDER NO. DESCRIPTION PRICE 170 Piranha® LED

AND E114R Red lens $3.85 LED Clearance/Side Marker Light

AND E114A Amber lens $3.85 with Reflex
• 2-diode LED light that functions as
151 Clearance/Side Market Light
clearance or side marker light.
• LED Alternative to traditional incandescent 114-Series light.
• Two mounting options: use center stud or two mounting screws.

ORDER NO. DESCRIPTION PRICE ORDER NO. DESCRIPTION PRICE
AND E151A Amber $6.82 AND V170A
AND E151R Red $6.82 AND V170R Amber $7.66

Red $7.66

Piranha® LED Oval Clearance/Side Marker LED Clearance/Side Marker Light

Light w/Reflector • 2 diode LED clearance/side marker light.
• Lens is welded to housing to form a single
• 6-diode, oval LED light perfect for light & medium duty applications.
• Functions as a clearance or side maker light with built-in reflector rugged unit.
• Include 153 LED light, 150-095 mounting bracket
optics. Eliminating the need for separate reflector.
• Meets DOT lighting requirements. and plug.
• Mounts on industry standard 3” centers. • See mounting accessories section for
• Includes both lead & ground wire for mounting
additional mounting options.
to all surfaces. • DOT legal when mounted horizontally with up

to 32 degree tilt back.

ORDER NO. DESCRIPTION PRICE ORDER NO. DESCRIPTION PRICE
AND V180A Amber $8.97
AND V180R Red $8.97 AND V153KA Amber $8.69
AND V153KR Red $8.69

Submersible Combination Reflector and Clearance Piranha® LED Clearance/Side Marker Light

(over 80” wide) or Side Marker Light • Bright Piranha® 1-diode LED.
• Black rubber grommet included standard.
On trailers over 80” wide, this unit can be used as a combination • Grommet fits 3/4” hole.
side marker, clearance light and reflector when mounted vertically. • Hard wired design prevents lamp-plug failures and cannot corrode.
Functions as a regular side marker or • Meets Federal requirements for clearance, side
clearance light when mounted in either
the horizontal or vertical position. Available marker and ID lights.
in stud mount. • 8-16 volt operating range.

ORDER NO. DESCRIPTION PRICE ORDER NO. DESCRIPTION PRICE
AND V171A Amber $9.33
AND E147A Amber $7.39 AND V171R Red $8.25

AND E147R Red $7.39

202 TRAILER ACCESSORIES

Submersible Combination Side Marker and Clearance 108 Clearance/Side Market Light

Lights Acrylic lens features built-in reflector and precision optics for brilliant
signal, and eliminates the need for separate reflector. Includes durable,
Complete your submersible lighting package with these fully sealed molded base with single-bulb socket. Includes single lead wire and
submersible side marker and clearance lights. Constructed of extra- grounds through mounting screw.
tough polycarbonate to resist breakage. The light bulb is contained in a
watertight compartment and comes with a pre-installed 15” lead wire. ORDER NO. PRICE
AND V108WA $4.08

ORDER NO. DESCRIPTION PRICE 169 Piranha® LED
WSB 3233 Amber Light, Stud Mount $7.22
WSB 3234 Red Light, Stud Mount $7.78 Clearance/Side
WSB 3285 Amber Light, Ear Mount $9.18
WSB 3286 $8.44 Marker Light
Red Light, Ear Mount
Sealed 2-diode LED light functions as a clearance, side marker,
Waterproof Snap-Lock Combination or ID light. Hard-wired design eliminates lamp-plug failure point.
Mounts on 3” centers.
Side Marker & Clearance Lights
ORDER NO. DESCRIPTION PRICE
Sonically sealed, polycarbonate lens and housing. Waterproof side AND V169KA
marker and clearance light, which can be snapped into a blade or AND V169KR Amber $7.88
decorative chrome base. Kit with module, mounting base, screws,
gasket, and wiring pigtail. Red $7.88

Replacement Lens Kit

For 440 and 441 Series.

ORDER NO. DESCRIPTION PRICE ORDER NO. PRICE
AND E44015 $3.83

WSB 3294 Amber Combo Light w/Chrome Base (15508Y) $5.91

WSB 3295 Red Combo Light w/Chrome Base (15508R) $6.30

Replacement Lens Reflectors DESCRIPTION PRICE
Amber $1.82
For 403010, 403060, 3023, 3073, ORDER NO. Red $1.69
3024, 3074. WSB 3357
WSB 3358
ORDER NO. PRICE
WSB 2423286 $2.97 License Plate Bracket

For use with most stud-mounted tail lights.
Zinc plated steel corrosion-free.

License Plate Bracket ORDER NO. PRICE

Plastic license plate bracket-black AND V42809 $3.68

ORDER NO. PRICE Aluminum Tread License Plate Bracket

WSB 3211 $1.90 Upgrade the appearance of your trailer with an aluminum tread
plate license plate bracket. Fits standard left side DOT brake/
License Plate Bracket tail lamps. No mounting hardware required. Installs between
existing tail-light mounting bracket and the left side tail light via
Flexible, plastic material allows bracket and license the lamps two mounting studs.
plate to swing away on impact — returns to original
position, saving both the bracket and the license plate.

ORDER NO. PRICE ORDER NO. PRICE
AND V44009 $2.21 CES 26053A $12.34

TRAILER ACCESSORIES 203

#7103 “Wishbone” Trailer Wiring Kit Trailer Connector

Contains: 25’ Wishbone trailer Four pole, flat plug trailer connector repair end with four 12” wires.
harness; 4’ trunk connector;
2 blue wire taps; and ORDER NO. PRICE
8 metal wire clips. AND V5400A $5.21

ORDER NO. PRICE Trunk Connector
WSB 7103 $26.01
Four pole, flat plug trunk connector replacement with three 48 inch
7 to 5-Way Harness Adapter wires, one 12 inch ground wire.

• 7-Way Round blade connector to 5-Way Flat pin connector. ORDER NO. PRICE
• Easily adapts tow vehicle connector to trailer connector. AND V5400B $7.23
• Simply plug adapter into tow vehicle

connector and plug in trailer connector.
• Full length plug shell ensures positive latching.
• Features non-corrosive nylon shell.

ORDER NO. PRICE Trailer/Trunk Extension Harness

AND E5415 $11.42 • 30” harness extension.
• Available in both 4-way and 5-way flat configurations.
• Each configuration has trailer connector on one

end and trunk connector on other.
• Perfect for those times when an extension is

needed between the tow vehicle and trailer.

5400 Series Split Harness ORDER NO. DESCRIPTION PRICE
AND E5401 4-Way $12.00
Split or “wishbone” type four conductor harness designed to split at trailer AND E5402 5-Way $13.79
tongue and run down each side of trailer. Provides for easier installation
of side marker lights as well as eliminating need for cross-over wire
at rear lights. Polarized flat plugs with BIA standard color-coded wires
meeting SAE J558a specification.

5-Way Connectors

ORDER NO. DESCRIPTION PRICE ORDER NO. DESCRIPTION PRICE
AND V5425Y 25’ $19.14 WSB 7273 6’ Trunk Connector $8.99
WSB 7283 48” Trailer Connector $9.66
4-Way Flat Tester
Adapters
This 4-way flat tester has 3 LED lights
that identify the faulty wire in a defective 707281 Adapter, 6-Way to 4-Way
wire harness. Converts 6-way connectors with round terminals to standard 4-way
flat connector.
ORDER NO. PRICE 707282 Adapter, 7-Way to 4-Way
AND V5411 $4.54 Converts 7-way connector with blade type
terminals to standard 4-way flat connector.

7-Way Adapter

Adapter mates 7-way vehicle to 5-way trailer.

ORDER NO. PRICE ORDER NO. DESCRIPTION PRICE
WSB 707250 $20.97 WSB 707281 6-Way to 4-Way $12.66
WSB 707282 7-Way to 4-Way $15.09

204 TRAILER ACCESSORIES

Trunk Connector Frame Clips

4 ft. leads – 18 inch ground wire 4 flat. Secure your drooping trailer wiring.
• 10 per pack.
ORDER NO. PRICE • Zinc plated steel clips 3/8” wide.
WSB 7275 $6.10 • Grips edges up to 5/32” thick.

Wishbone Trailer Harness ORDER NO. PRICE
CES 16867A $5.37
Length 25 ft.

ORDER NO. PRICE
WSB 7261 $19.78

Trailer Connector

18 inch leads – standard 4 flat.

4-Pole Flat Connector

12” long wires on male and female sides. Molded
water-proof bodies. Color coded wires. Polarized for
proper mating of circuits.

ORDER NO. DESCRIPTION PRICE

WSB 7285 Wunside $5.06

WSB 7286 Wishbone $5.81

Trailer Extension Harness ORDER NO. PRICE
SIE TC43654 $11.40
2 feet in length
Molded Connectors
ORDER NO. DESCRIPTION PRICE
WSB 707254 4 Wire Design $7.63 4-pole flat female shrouded connector with
WSB 707255 5 Wire Design $9.25 48” color coded wire leads.
(Tow vehicle side)
Two-Pole Connector
ORDER NO. PRICE
Connectors are polarized (and cannot be reversed) so that damage to SIE TC44224 $10.18
your equipment is avoided. Molded insulator bodies, precision machined
brass contacts. Removable snap-on rubber caps protect the connectors.

ORDER NO. PACK PRICE

COL M121 Bulk $15.46

COL M121BP Bubble $16.35

2-Pole Flat Connector Molded Connectors
Polarized 2 Contact Connector
12” long wires on male and female sides. Molded water-proof bodies.
Color coded wires. Polarized for proper mating of circuits. For boats and tractor for automotive, marine, trucks for 6, 12, and 24
10 per carton. volt trailers. Molded ABS interiors. Protected by PVC caps.

ORDER NO. PRICE

SIE TC43634 $10.05

Polarized 4 Contact Connector ORDER NO. PRICE

Molded ABS interiors. Protected by sealing caps. SIE TC43604 $9.49

ORDER NO. PRICE
SIE TC43624 $10.06

TRAILER ACCESSORIES 205

Dust Caps

Set of two weatherproof and dustproof caps to protect your 4-pole flat trailer connector from the elements
when NOT towing your trailer. Tight fitting caps seal out contaminants. Built in “keepers” clip to your harness to
prevent loss. Use with General Connector Nos., 4365, 4367, 4372, 4374, 4375, 4384, 4385 and all other brands
of 4-pole flat connectors.

ORDER NO. PRICE

SIE TC42984 $7.88

4-Pole Flat Male Shrouded Male 4-Pole Flat Connector Female 4-Pole Flat Connector

Connector With 12” color coded wires. Female (tow vehicle side) half of
(Trailer side). General #4367
With 12” color coded wire leads. (Trailer side).

ORDER NO. PRICE ORDER NO. PRICE ORDER NO. PRICE
SIE TC44254 $10.85 SIE TC44054 $9.49 SIE TC44094 $10.29

Adapter – 7 TO 5 & 4 Endurance™ Flex-Coil

Adapts a 7 RV blade to BOTH a 5-wire flat AND a • Keeps wires from dangling on the ground preventing damages
4-wire flat
and shorts

• Stretches to 3 feet

• Easy-grip, heavy-duty connectors

with heavy-duty cable

ORDER NO. PRICE ORDER NO. DESCRIPTION PRICE
HOP 47065 7 round to 4 flat $43.42
HOP 47385 $23.98 HOP 47075 7 round to 5 flat $53.03

Flat Flexcoil Adapters with Nite-Glow™ Endurance™ Flex Adapter

Nite-Glow function lights up on taillights. • Provides for flexible reach
Provides additional length and durability. • Includes function testing LED’s
Increased weather-proofing. • Easy-pull grip design
• Dust cover and protected wire for added durability

ORDER NO. DESCRIPTION PRICE ORDER NO. DESCRIPTION PRICE
HOP 47025 7 round to 5 flat $56.62 HOP 47340 7 round to 4 flat $24.02
HOP 47390 7 round to 5 flat $25.93

206 TRAILER ACCESSORIES

Endurance 40975 7 to 5 Flat Adapter

Multi-Tow® Connector Multi-Tow® Ford / Chevy / GMC 7:4 18” extension harness

• Endurance Multi-Tow®- Vehicle Side 7 RV Blade, (OE Replacement)
5 & 4-Wire Flat Connector
• Multi-Tow® provides 7 RV Blade and 4 Wire
• Patented Multi-Tow®; provides multiple towing Flat towing options from one connector
options from a single connector- 3 in 1
• Plug-In Simple®: No cutting, No splicing–
• Maximum Durability and Industry’s Best: 3-Year Saves time
Warranty
• Utilizes OEM connectors- enhanced fit and
• Long-life hinges opens 180 degrees weatherproofing
• Reinforced easy-grip lids
• Ultimate weatherproofing and corrosion resistance • Applies to over 30 different vehicle applications
• Complete with powder equipped with a factory
tow package
coated mounting bracket,
hardware, and terminal • Impact and corrosion
grease packet resistant

• 2-Door connector
protection

ORDER NO. PRICE ORDER NO. PRICE ORDER NO. PRICE
HOP 40975B $35.65 SIE TC50000 $20.57
HOP 48470 $33.88

7 RV Round Blade to 5-Wire Adapter - Multi-TowTM 7:4 7-Way RV Blade to 4-Wire Flat
“Glow” Adapter
Flat Adapter • Adapts a 4-wire flat to BOTH a 4-wire flat
and a 7 RV blade • Lights up on taillight function
Designed to adapt a vehicle equipped with a 7 • Find your connection in the dark!
RV round blade type • Patented design
connector to a 5-wire • Weatherproof ORDER NO. PRICE
flat trailer plug. HOP 47335 $14.26

ORDER NO. DESCRIPTION PRICE 47315

HOP 47375 Blister Pack $14.10 ORDER NO. PRICE Converts 6-way round pin type plug to
HOP 47185 $42.37 4-way flat adaptor.
HOP 47375B Bulk $12.84
6 to 4 way
Lite Mate System Trailer Connectors
47465
Modular Vehicle-to-
4-way round to 4-wire flat adapter (flexible).
Trailer Wiring Adaptors
4 to 4 flat
ADAPTORS converts from one
type of trailer plug to one of
another design.

47355 ORDER NO. PRICE ORDER NO. PRICE
HOP 47465 $12.90 HOP 47315 $17.75
7-way RV blade to 4-wire flat adapter.
47365 47105

Converts 7-way blade type plug to 4-way 4-wire flat trailer connector. For use with
flat adaptor. (Flexible) LiteMate® vehicle connector and trailers with
standard 4-wire flat connector
(3’ long).

47115

4-wire flat extension, 4 feet.
Passes through vehicle ground.
Color coded bonded wire.

7 to 4 way

7 to 4 way

ORDER NO. DESCRIPTION PRICE ORDER NO. PRICE
HOP 47105 $10.23
HOP 47355 Blister Pack $10.37 ORDER NO. PRICE HOP 47115 $10.29
HOP 47365 $17.75
HOP 47355B Bulk $8.52

TRAILER ACCESSORIES 207

Super Rollers Rocker Roller 3” Bow Stop Roller

The Original Polyurethane Rollers 4” x 3” hole size 1/2”
• Will outlast ordinary rubber rollers many times Fits 1-1/16” to 1-1/8” shaft.
• Will not mark your boat ORDER NO. PRICE
• Shock absorbing ORDER NO. PRICE STZ RP33 $11.30
• Extremely cut resistant
• Time-tested, do not be fooled by imitations STZ RP36A $14.06
• Made in the USA

Bow Stop Roller 4” Keel Roller

hole size 1/2” hole size 5/8”

ORDER NO. PRICE 4”Keel Roller
STZ RP444 $12.42
hole Size 1/2”
5” Keel Roller hole size 5/8” Ribbed Rocker Roller
5” Keel Roller hole size 1/2” 4” x 3” ORDER NO. DESC. PRICE
STZ RP4 5/8” Hole $13.54
ORDER NO. DESC. PRICE Fits 1” and 1-1/16” shaft. STZ RP45 1/2” Hole $13.64
STZ RP5 5/8” Hole $15.26
STZ RP55 1/2” Hole $15.26 ORDER NO. PRICE
STZ RP36 $15.91
8” Keel Roller
5-1/4” Keel Roller
hole size 5/8”
hole size 5/8”
ORDER NO. PRICE ORDER NO. PRICE
STZ RP504 $17.21
7” Keel Roller STZ RP8 $30.98

hole size 5/8”

ORDER NO. PRICE

STZ RP7 $27.89

“V” Bow Stop 10” Keel Roller 12” Keel Roller

ORDER NO. DESCRIPTION PRICE hole size 5/8” hole size 5/8”
STZ RP3 3” “V” Bowstop $12.29
STZ RP404 4” “V” Bowstop $17.55 ORDER NO. PRICE ORDER NO. PRICE
STZ RP10 $35.63 STZ RP12 $39.45

The Ultimate Bow Stop Self-Centering Keel Roller 8” Wheel

ULT-3 & ULT-4 are complete sets Fits 12” wide bracket. 5/8” hole. Used in pairs on winch stand
with bolt, nut, and washers. for Carolina Skiff (sold each)
ULT-3 fits 3” bracket Length: 8-1/2”
ULT-4 fits 4” bracket Width: 3/8”
Hole size: 5/8”

ORDER NO. PRICE ORDER NO. PRICE ORDER NO. PRICE
STZ ULT3 $46.30 STZ RPSC12 $30.98
STZ ULT4 $46.30 STZ RP82 $39.99

208 TRAILER ACCESSORIES

Rollers

Rollers are replacements for the original equipment of many trailers. Fit standard shaft sizes. Black rubber.

ORDER NO. DIAMETER LENGTH SHAFT SIZE PRICE ORDER NO. DIAMETER LENGTH SHAFT SIZE PRICE
CES 29540 E. BOW ROLLER
CES 29500 A. DEEP V KEEL ROLLER 3” 3” 1/2” $7.93
CES 29501
CES 29502 3-1/2” 12” 5/8” $32.92

3-1/2” 10” 5/8” $29.92

3-1/2” 8” 5/8” $21.71 ORDER NO. DIAMETER LENGTH SHAFT SIZE PRICE

CES 29550 F. Y-STOP
CES 29551
ORDER NO. DIAMETER LENGTH SHAFT SIZE PRICE CES 29552 Span 7” 4” x 4” 1/2” $26.61
B. SPOOL ROLLER
CES 29520 3” 8” 5/8” $14.71 Span 6” 3” x 3” 1/2” $20.39
CES 29522 3” 5” 5/8” $10.44
CES 29523 3” 5” 1/2” $11.57 Span 4” 2” x 2” 3/8” $7.52
CES 29524 3” 4” 5/8” $10.61
CES 29525 3” 4” 1/2” $9.37 ORDER NO. DIAMETER LENGTH SHAFT SIZE PRICE
CES 29561
G. SIDE-GUIDE

2-1/2” 12” 5/8” $26.31

ORDER NO. DIAMETER LENGTH SHAFT SIZE PRICE

ORDER NO. DIAMETER LENGTH SHAFT SIZE PRICE CES 29570 H. END CAP
CES 29532 CES 29600
C. WOBBLE ROLLER 2-1/2” 1-1/4” 1/2” $5.01

4-3/8” 4-3/8” 3/4” $22.34 3-1/2” 1-1/4” 5/8” $6.06

ORDER NO. DIAMETER LENGTH SHAFT SIZE PRICE Hull Sav’r PVC Product Line
CES 29530
D. RIBBED WOBBLE ROLLER Poly vinyl rollers are long lasting, will absorb shock, are cut resistant
and will not mark or mar your boat. Tie Down’s enhanced formula for
4-3/8” 3” 3/4” $15.12 PVC far outperforms traditional polyurethane products.

CES 29537 5” 3” 1-1/8” $20.85

Roller Display

BLACK PVC ROLLERS

This display includes the following Black PVC rollers ORDER NO. DESCRIPTION PHOTO SHAFT SIZE PRICE
• (3) 86421 “V” stops 4” TIE 86406 Keel Roller 4” Spool Type C 5/8” $6.53
• (3) 86408 5” keel rollers (spool type) TIE 86402 E 1/2” $4.52
• (2) 86409 8” keel rollers TIE 86408 Bow Roller 3” F 5/8” $7.53
• (2) 86407 5” keel roller (center guided) TIE 86407 Keel Roller 5” Spool Type G 5/8”
• (2) 86406 4” keel roller (spool type) TIE 86409 Keel Roller 5” Center guided H 5/8” $11.07
• (2) 86420 “V” stop 2” TIE 86410 H 5/8” $15.81
• (2) 86413 “V” stop 3” TIE 86411 Keel Roller 8” H 5/8” $18.36
• (2) 86400 bow roller 4” TIE 86421 Keel Roller 10” O 1/2” $20.53
• (2) 86402 bow roller 3” TIE 86413 Keel Roller 12” O 1/2”
TIE 86420 V Bow Stop 4” O 1/2” $9.91
V Bow Stop 3” $9.83
TIE 86419 V Bow Stop 2” P $5.81

ORDER NO. PRICE TIE 86400 5” Wobble Roller Kit (4) B 1/2” $56.37
TIE 86435 $235.00 TIE 86428 comes with 7/8 & 1.15 bushings, R 3/4”
$6.07
Hog Rings & Washers $10.87

Bow Roller 4”
Wobble Roller 4” Smooth

TRAILER ACCESSORIES 209

Hull Sav’r PVC Product Line

Poly vinyl rollers are long lasting, will absorb shock, are
cut resistant and will not mark or mar your boat. Tie Down’s
enhanced formula for PVC far outperforms traditional
polyurethane products. Now available in amber or black.

AMBER PVC ROLLERS

ORDER NO. DESCRIPTION PHOTO SHAFT SIZE PRICE

TIE 86199 Keel Roller 12” A 5/8” $39.18

TIE 86287 Bow Roller 4” B 1/2” $8.01

TIE 86142 4” Bow Roller Assembly w/End Bells B&N 1/2” $22.31

TIE 86284 Keel Roller 4” Spool Type C 5/8” $9.61

TIE 86169 Keel Roller 10” D 5/8” $35.36

TIE 86289 Bow Roller 3” E 1/2” $5.84

TIE 86143 3” Bow Roller Assembly w/End Bells E&K 1/2” $16.77

TIE 86283 Keel Roller 5” Spool Type F 5/8” $7.72

TIE 86158 Keel Roller 5” Center guided G 5/8” $14.62

TIE 86159 Keel Roller 8” H 5/8” $30.76

TIE 86198 3-1/2” End Caps for Keel Rollers I 5/8” $14.37

TIE 86290 End Bell for 3” K 1/2” $4.98

TIE 86291 Keel Pad L $8.65

TIE 86288 End Bell for 4” N 1/2” $6.51

TIE 86144 5” Wobble Roller Kit (4) P $55.69
comes with 7/8 & 1.15 bushings,
Hog Rings & Washers – Yellow

TIE 86439 5” Wobble Roller Kit (4) P $58.53
comes with 7/8 & 1.15 bushings,
Hog Rings & Washers – Blue

TIE 86293 4” Smooth Wobble Roller Kit (4) Q $55.36
comes with 7/8 bushings

TIE 86285 V Bow Stop 3” O 1/2” $12.23

Wobble Roller Retainer Rings Roller Shafts

Replacement washers and clip rings for “wobble” roller bunk Steel shafts are available to fit any roller size, with or without end caps. Shaft
wheels. Skin pack set for one roller. MASTER PACK: 12 cards P/N supports roller to turn freely. Two Pal Nuts included with each shaft.
86252 “Hog Rings”
P/N 86258 sold each.

ORDER NO. DESCRIPTION CTN. PRICE
TIE 86252 1 Set $12.47
TIE 86258 Washers & Hog 100 $0.74
Rings

Hog Ring Only

Pal Nuts ORDER NO. LENGTH O.D. FINISH PRICE
TIE 86183 5-1/4” 1/2” Galvanized $5.89
Attach to end of shaft to retain roller within bracket. Cold TIE 86184 6-1/4” 1/2” Galvanized $6.06
rolled steel, zinc-plated. TIE 86185 5-1/4” 5/8” Galvanized $6.90
TIE 86186 6-1/4” 5/8” Galvanized $7.13
ORDER NO. SIZE PACKAGING PRICE TIE 86187 9-1/4” 5/8” Galvanized $8.36
TIE 86188 11-1/4” 5/8” Galvanized $9.15
TIE 86300 For 1/2” shaft 50 per box $33.23 TIE 86189 13-1/4” 5/8” Galvanized $9.85
TIE 86032 15-1/4” 5/8” Zinc Plated $8.81
TIE 86305 For 1/2” shaft 4 ea. skin pack $4.28 TIE 86033 19-1/4” 5/8” Zinc Plated
$10.45
TIE 86301 For 5/8” shaft 50 per box $36.35

TIE 86310 For 5/8” shaft 4 ea. skin pack $4.88

210 TRAILER ACCESSORIES

Roller Bracket Assemblies Scuffbuster
Stainless Steel Bow Guard
• Pre-assembled for easy installation
• Strong hot-dipped galvanized brackets hold shock Protects your boat from scuffs and
abrasion caused by trailer rollers.
absorbing rollers to give proper keel support Measures: 5.75” x 4.5”.
• 17/32” x 5” slot for vertical adjustment
• Attach with 1/2” or 7/16” bolt ORDER NO. PRICE
KLG 02638 $19.95
ORDER NO. DESCRIPTION SIZE PRICE

CES 10400G Black Roller 4” $35.51

CES 10401G Black Roller 5” $40.17 CES 10400G
CES 10451G
CES 10403G Black Roller 8” $58.93

CES 10404G Black Roller 10” $67.44

CES 10405G Black Roller 12” $79.50
$47.74
CES 10451G Yellow Thermal Plastic Roller 5”

CES 10453G Yellow Thermal Plastic Roller 8” $72.59

CES 10455G Yellow Thermal Plastic Roller 12” $87.03

Panel Brackets Panel Brackets

Sold in pairs (right & left) to accommodate any size roller Brackets are one piece, heavy duty hot dipped galvanized 11-gauge
length. Slot allows vertical adjustment for stabilizing boat on steel, specifically designed to support keel rollers. Slots accept 7/16” or
trailer. Slots accept 7/16” or 1/2” bolts. Use 1/2” or 5/8” roller 1/2” diameter bolts and provide vertical roller adjustment. Roller shaft
shaft. Pack 12 pair. diameter can be 1/2” or 5/8”. Pack 12.

ORDER NO. PRICE WIDTH
TIE 81235 $16.55 ORDER NO. ROLLER SIZE BETWEEN PRICE

SLOTS

TIE 86150 4” 2” $10.61

TIE 86151 5” 3” $11.19

TIE 86152 8” 6” $14.91

TIE 86155 10” 8” $16.90

TIE 86153 12” 10” $19.34

Keel Roller Bracket & Assembly Roller Bunks with Hull Savr PVC Rollers

Adjustable offset brackets mount on tongue for Heavy duty galvanized steel frame provides full hull support. Roller
keel support. Assembled version comes bunks can be adjusted vertically with optional bolster support swivel
complete with 4” rubber roller (for 2” wide brackets. Bunk kits do not include mounting hardware.
tongue) and hardware.

ORDER NO. DESCRIPTION PRICE ORDER NO. LENGTH PRICE
TIE 86121 $36.74 TIE 86145 5’ $229.28
TIE 86122 Keel Roller $12.12
Assembly
Keel Roller
Brackets pair

Roller Bunks

D-L roller bunks provide a quick, easy,
and inexpensive way to upgrade bunk style trailers to rollers.
The universal mount attaches directly to either vertical or
horizontal positioned bunk boards. It can also be installed with
optional bracket No. 6389. Constructed of heavy (12 Gauge)
pre-galvanized steel. Features 3 rollers per set. Sold in pairs.

ORDER NO. LENGTH BOAT PRICE Optional Bracket
CAP.
DUT 6387 4’ 10 Sets of 3 $160.54 Bracket fits 6387 and 6388 roller bunks.
DUT 6388 5’ 12 Sets of 3 2,500 lb. $177.99
3,000 lb. ORDER NO. PRICE
DUT 6389 $15.39

TRAILER ACCESSORIES 211

Bunk Carpeting, Black Bunk Board Carpet

11” wide covers a 2x4 or a 2x6 board All weather carpet is designed to replace worn and frayed bunks on your
18” wide covers a 3x8 or a 4x 8 board trailer. The marine grade carpet will not rot
• Weather resistant Marine grade carpet or mildew. Each roll measures 11”
• High quality 100% PET polyester x 12’. Color: Black
• Durable backing
• Minimal water retention

ORDER NO. SIZE PRICE
$34.52
CES 11330 11”x12’ $71.07 ORDER NO. PRICE
TIE 86137 $26.72
CES 11349 18”x18’ $261.71
$426.39
BULK ROLLS

CES 113302 11”x150’

CES 113492 18”x150’

Bunk Carpeting

Easily cut to length and install.
Neutral, charcoal color.

Bunk Glide On’s ORDER NO. SIZE PRICE
FUL 8008 8”x12’ $21.00
Self-centering bunk glide-on’s with interlocking modular sections. FUL 8012 12”x12’ $27.70
Slide on or off with less effort. Easy to install. Fits various bunk board
lengths. Ideal for all boats. Fits 2’x6’x8’ Keelguard
standard bunk boards. Kit includes 8 ea.
2’ sections and mounting hardware. Protect against abrasive sand, rocks, concrete ramps and oyster beds
• Eliminate costly repairs
ORDER NO. PRICE • Enjoy the highest quality and superior engineering
TIE 86295 $85.72 • Increase the value of your boat
• Easy do it yourself kit
2”x4” Bunk Boards Wear and damage to your
boat’s keel can break down its
Heavy duty replacement bunk boards come in three sizes, protective gelcoat finish, allowing
3 ft., 4 ft., and 5 ft. lengths. Black marine grade carpet water to reach and destroy the
provides a smooth surface for your boat to easily slide on or off. fiberglass laminates.
Sold in pairs.
ORDER NO. LENGTH COLOR PRICE
ORDER NO. SIZE PRICE KLG 20106 6 ft. White $160.95
TIE 86127 3 ft. $39.58 KLG 20108 8 ft. White $194.95
TIE 86128 4 ft. $42.74 KLG 20110 10 ft. White $228.95
TIE 86129 5 ft. $50.66 KLG 20206 6 ft. Black $160.95
KLG 20208 8 ft. Black $194.95

Bunk Slicks Liquid Rollers™

Black bunk slicks bolt directly onto Trailer Bunk Board Lubricant
carpeted bunk boards. Fits 2 x 6 or 2 x • Make the loading and unloading of boats easy!
4 standard bunk boards. Slide on or off • Bunk boards will be as slick as rollers
with less effort. Easy to Install. • Long lasting, non-greasy, non-staining formula
8 pieces per package. • Dramatically reduces friction
• Repels road dirt and grime
ORDER NO. SIZE # OF PIECES PRICE
ORDER NO. SIZE CTN. PRICE
TIE 86170 1-3/4” X 17” 8 $34.96 MKT 6810 10 oz. 12 $13.75

TIE 86164 3” X 16” 10 $90.07

212 TRAILER ACCESSORIES

Bunk Brackets Swivel Bolster Bracket Assemblies

Heavy 11-gauge hot dipped galvanized steel brackets mount These adjustable brackets are designed to support roller bunks. Hot dip
2” bunks on edge. Slotted for vertical adjustment to standard or galvanizing for years of use in the harsh marine environment.
deep-V hulls. Skin packed in pairs. Master pack 12 pair. • Bolster brackets: 8” or 10” long and 2-1/2” wide with 1/2” wide slots
• Swivel bracket: 11 gauge material, bunk flange 1-3/8” x 3-1/2”, bunk

flange holes 3/8” dia., swivel flange 2” tall x 3-1/2”, swivel flange hole
1/2” dia., hole centers 2-1/2”

ORDER NO. BRACKET SLOT PRICE
6” $17.80
TIE 81225 9-1/2” $19.96 ORDER NO. OVERALL SLOT PRICE
9-1/8” LENGTH LENGTH
TIE 81230 12-5/8” $13.06
$15.59
CES 10000G 9” 2-3/4”

CES 10001G 11” 3-3/4”

Bolster Galvanized 90° Heavy Duty Vertical Bunk Brackets

Brackets Strong brackets to mount large bunk boards to carry larger boats.
• 6” tall.
Bolster brackets are designed to • 1/4” thick
support bolster or bunk boards. Slotted • 5” wide
for vertical adjustment and feature non- • Hot dip galvanized
slip dimples to avoid movement and Sold individually.
increase load capacity. Bolster brackets
and swivel brackets skin packed in
pairs, with bolts and nyloc nuts.

ORDER NO. SIZE SLOT PRICE
2-3/4” $15.05
TIE 81210 8” 3-3/4” $18.39 ORDER NO. HEIGHT PRICE
TIE 81215 10” 4-3/4” $21.73 CES 10160GA 6” $22.01
CES 10161GA 8” $25.04
TIE 81220 12” CES 10162GA 10” $27.69

Swivel Bracket Swivel Bracket

Use with adjustable bolster brackets for proper • Bunk flange holes 3/8” dia.
angle of bunk or bolster boards. Packed in pairs • Bunk flange 1-3/8” x 3-1/2”
with 1/2” x 1” bolts and 1/2” Nyloc nuts. • Swivel flange hole 1/2” dia.
• Swivel flange 2” tall x 3-1/2”
ORDER NO. PRICE • Bunk flange hole centers 2-1/2” plus one hole centered
• 7 gauge material
TIE 86160 $5.54 Sold individually

V-Wing Bracket for Pontoon Bunks Laterally Adjustable ORDER NO. PRICE
CES 10206GA $5.84
• Hot Dip Galvanized.
• Supports 2x6 or 2x8 Bunks
• 7” Lateral adjustment slot for

perfect pontoon to trailer
alignment

ORDER NO. PRICE
CES 26244GA $23.17

TRAILER ACCESSORIES 213

Post Style Boat Guide-On PontoonRoller Guide-On

• Makes it easy to see the end of the trailer while on the road or when Ideal for bunk style pontoon boat trailer with box, channel, or I-beam
loading or unloading frames up to 3” wide x 4-1/4” tall. Minimum friction rolling action easily
guides pontoon boat onto trailer. Height is 25” above trailer frame. Mount
• Galvanized posts extend more than half-way into each non marring with roller bunks 2-3” from pontoons on a trailer frame cross member.
heavy duty 2” PVC tube for extra stability • Fits frames up to 3” wide x 4-1/4” tall
• U-bolt mounting brackets
• Can be mounted on top of frame for extra height • Includes two rubber roller bunks
• Complete to fit frame up to 3” wide x 4-1/4” high • Galvanized steel construction
• 60” total height. Post inserted 36” into PVC • Zinc plated hardware

tube. Can be extended out to 19” from
each side of trailer.

ORDER NO. PRICE
CES 27672 $143.64

ORDER NO. PRICE PontoonBunk Board Guide-On
CES 27640 $157.08
Ideal for bunk style pontoon boat trailer with box,
Pontoon Boat Post Guide-On channel, or I-beam frames up to 3” wide x 4-1/4” tall.
Pontoon glides easily past the carpeted bunk boards
Guide posts go inside pontoons to center boat on trailer. Metal guiding the pontoon boat onto the trailer. Height is
arm extends fully into PVC tube for strength. Height of 22”. adjustable and is set during install between 24” and 36”
Made of 1-1/2” square 16 guage pre-galvanized steel tubing aboice trailer frame. Mount with bunks 2-3” from pontoons
covered by 2” PVC tube. Mount on top of trailer frame. Comes on a trailer frame
complete with hardware for trailer frames up to cross member.
3” wide by 4-1/4” high. • Fits frames up to 3” wide x 4-1/4”

tall
• U-bolt mounting brackets
• Includes two 24” carpeted bunk

boards
• Galvanized steel construction
• Zinc plated hardware

ORDER NO. PRICE
CES 27670 $89.67

I-Beam Frame Guide-On Mounting Bracket Kit ORDER NO. PRICE
CES 27671 $119.61
Allows any Smith guide-on with 1-1/2” square
uprights to be mounted on any steel or aluminum Post Guide-On Covers 48” Black
I-beam frame. This design is simple to install and
can be fitted to the top or bottom of an I-beam. Can Post Guide-On Covers protects the boat finish from
also be used as a tie down point. scuffs. They are sized for a close fit on standard 2”
Fits I-Beams up to 4” wide. schedule 40 PVC posts (2-3/8” actual outer diameter).
Kit Includes: Covers are made from strong polyurethane coated
4 galvanized brackets 600D nylon fabric with nylon closures on each end.
2 short 3/8” bolts & 2 long 3/8” bolts (Select the Open bottom and top to allow for LED guide on lamps.
length needed for your I-beam) Sold in pairs.
All the nuts & washers needed

ORDER NO. PRICE ORDER NO. PRICE
CES 27682A $45.32
CES 27901 $54.27

214 TRAILER ACCESSORIES

LED Lighted Post Style Boat Guides Post Boat Guide

• LED Lighted top for great visibility Adapts to all tube and channel trailer frames.
• 40” or 60” total height Galvanized for long lasting protection. Heavy
Combination amber and red light provides added duty steel component parts. Bright orange end
safety lighting for improved visibility when trailering caps on these PVC guides give you a brighter
on the road. Light clearly marks where the trailer target when loading your boat. 16” of side
is behind tow vehicle when backing down a ramp adjustment. All hardware included.
in the dark. Red light faces backward. Amber light
faces forward. ORDER NO. PRICE
2” PVC tube is notched to prevent twisting. TIE 86105 $87.44
Includes wire and wire connectors and all mounting
hardware for frames up to 3” wide x 4-1/4” height.
Does not replace mandated trailer lights.

Top LED Light Kit for Post Guides Heavy Duty Guide On Post

Add a pair of these amber and red lamps on top of 48” high PVC pipe guides your boat on
your existing post guide-ons and see your trailer’s safely and gives you visual aid when
position clearly as you back. Also serves as an backing an empty trailer. The non-mar PVC
added safety light to improve the visibility of your pipe is braced inside with metal tubing
trailer on the road. Kit includes two lamps each with going 20” up into the tube, adding strength
8 ft. of wire, all necessary electrical connectors, and impact resistance. All hardware is
and post locking bolts. included, and is hot dip galvanized for
• Does not replace mandated trailer lights corrosion protection.

ORDER NO. PRICE

TIE 86103 $87.44

ORDER NO. DESCRIPTION PRICE
CES 27740 40” Height $137.01
CES 27760 60” Height $170.37
CES 27656A
LED Light Kit $40.66

Light Bracket For Post Style Boat Guides Fixed Angle
Roller Guides
Includes:
Mount these 13” rubber rollers on top or
• 2 pieces of color coded 3-wire bonded wire, 8 ft. length each beneath the frame for added adjustment.
• 2 galvanized brackets The hot dip galvanized mounts adjust
• 4 terminals and 4 butt connectors for width, up to 13” on each side and
• All hardware required to mount to post style boat guide fit frames up to 4”. Sold in pairs with
• Complete assembly intructions hardware included.
• Mounts lights out from PVC post approx.
ORDER NO. PRICE
7-1/2” (Check with your local DOT for TIE 86102 $128.81
maximum trailering width restrictions)
• Lights are not included Bunk Board Guide On

ORDER NO. PRICE Guide on your boat safely in high winds or strong currents. The marine
CES 27650A $46.94 grade carpet cradles your boat protecting it from scratches and dings. All
hardware is hot dip galvanized for corrosion protection,
and fits frames up to 4-1/4” in size. The bunk boards
mount 21” above your trailer frame and have 13” of
side movement on each side.
Sold in pairs with all hardware included.

ORDER NO. SIZE PRICE
TIE 86123 2’ $139.90
TIE 86124 5’ $205.40

TRAILER ACCESSORIES 215

Spare Tire & Hub Carrier Low Rider Guide On’s

(includes 5 stud pre-greased hub with bearings) Ideal for Jon Boats, Bass Boats and Personal Watercraft.
• Heavy duty steel carrier mounts both The guide posts are hot dip galvanized for long life with
covers made from high impact non-marking molded
spare hub and spare tire PVC. Mounts to trailer cross members 2” by 2”
• Designed for UHI 1750# hub with 1-1/16” and and 2’ x 3’ frames.
Hardware included.
1-3/8” bearings
• Fits all trailer frames up to 3” and 4” high ORDER NO. PRICE
• Security holes for optional cable and lock
TIE 86466 $89.41
ORDER NO. PRICE
TIE 86079 $114.95 Roller Guides

Side Mount Tire Carrier • One piece adjustable clamp with U-bolt
• Fits all channel and tube frames up to 5”
• Adjustable bolt circle fits both 4 lug and 5 lug wheels • Heavy duty 2” roller with end caps
• Offset height raises tire and provides additional ground clearance • Roller angle adjusts to angle of hull
• Security holes provide for optional cable and lock (not included) • 16” of adjustment (8” each side)
• Hot dip galvanized for lasting protection • Hot dip galvanized steel
• Fits all trailer tongues up to 3” wide by 4” high • Full color display box
• Extra heavy duty welded steel construction • Easy mounting!

ORDER NO. PRICE

TIE 86106 $117.74

High Mount Tire Carrier

• Accommodates 4, 5, and 6 lug wheels
• Hot dip galvanized for lasting protection
• Fits all trailer frames up to 3” wide by 4” high
• Heavy duty steel tubing

ORDER NO. PRICE
TIE 86101 $48.38

Spare Tire Carrier

Adjustable bolt circle fits both 4 lug and 5 lug wheels.
Fits all trailer frames up to 6” high. Heavy duty welded
steel construction.

ORDER NO. PRICE ORDER NO. PRICE
TIE 86098 $35.78
TIE 86069 $72.24

U-Bolt Style Tire Carrier
without Padlock

Mounts tire in any position on tongue or trailer frame. The frame must be
between 2” x 2” square to 3-1/2” x 4” rectangular in size. Fits 4 or 5 lug
hole rims. Extra long 8-1/2” shaft. Fits 8” to 15” tires. Solid zinc plated
steel, square bend U-bolt with bracket.

ORDER NO. PRICE
ATT 110903 $11.28

216 TRAILER ACCESSORIES Autoguard Quick Flat Fix w/ Hose

Heavy Duty A non-flammable tire sealer and inflator which seals and
Spare Tire Carrier inflates most common punctures instantly and effectively,
while the tire is still on the vehicle. Seals most punctures up
Hot Dipped galvanized spare tire carrier mounts securely on frame or to 3/16”. It is a safe temporary repair for use on passenger
tongue. Strong 7ga steel construction for extra strength. Holds 4 or 5 car and light truck tires, tube and tubeless.
lug wheels and adjusts for frames up to 3” wide by 4” high. Side offset Not recommended for tires larger than 15 inches.
is 4-1/2” from frame with 5” rise for ground clearance. All mounting
hardware is included.

ORDER NO. PRICE ORDER NO. SIZE CTN. PRICE
CES 27310G $44.16
COA 7011415 13 oz. 12 $9.34
Spare Tire Carrier with Lock
Spare Tire Carrier
• Heavy 7/16” U-bolt secures tire on tongue or frame up to 3” wide
• Holds 4 or 5 lug wheels This bracket extends the spare tire up and away from trailer and boat.
• Will fit 8” thru 14” and most 15” wheels
• Adjustable threaded brackets will hold padlock for security Heavy-duty steel construction. Zinc-plated with TUFFPLATE® finish. Fits
• Overall length 8-3/4”, thread length 3”, zinc-plated
either 4 or 5 hole rim and trailer tongues up to 3” x 5”. Maximum tire and
wheel size 14”. Complete with mounting hardware.
1 per carton.

ORDER NO. PRICE ORDER NO. DESCRIPTION PRICE
CES 27202 $27.44 DUT 6121U Zinc-Plated $54.86

Spare Tire Carrier Extra Offset Spare Tire Bracket

• Fits 8”, 9”, 13”, 14”, 15” wheels with 4 or 5 lug rims This heavy duty bracket extends the spare tire at an angle to avoid
• Easy to install damage or marring of boat finish. Zinc-plated TUFFPLATE® finish. Fits
• Includes lug nuts to secure wheel to frame. trailer tongues 2” or 3” wide. Up to 5” high. Fits wheel sizes
• Heavy-duty 1/2” diameter construction from 13” to 15”.
• Zinc-plated to resist corrosion
ORDER NO. PRICE
ORDER NO. PRICE DUT 6126 $148.34
FUL ETC0101 $11.84

Spare Tire Carrier

Extra length allows the handling of wide
tires or spans the wider tongues of
custom-built trailers. Will fit either 4 or 5
hole rims. Packaged 6 to a carton.

ORDER NO. DESCRIPTION PRICE

DUT 6220 Zinc-Plated $14.46

TRAILER ACCESSORIES 217

Wheels

Hub Kits

• Factory pregreased
• Replacement wheel hub kit
• Bearings and hub cavity 100% pregreased
• Grease seal and bearings are preassembled
• Sold each

ORDER NO. DESCRIPTION PRICE

PAINTED HUB KITS $59.57
$61.64
TIE 81060 4 Stud Hub Kit (1250#) 1” w/ lug nuts $61.64
$72.04
Galvanized TIE 81080 5 Stud Hub Kit (1250#) 1” w/ lug nuts
$92.94
ORDER NO. TIE 81085 5 Stud Hub Kit (1350#) 1-1/16” w/ lug nuts $86.94
AMW 20234
AMW 20354 DESCRIPTION PRICE TIE 81090 5 Stud UHI Hub Kit (1750#)
13” Spoke Wheel 5 Lug $48.20 1-1/16” & 1-3/8” w/ lug nuts
14” Spoke Wheel 5 Lug $59.00
GALV X HUB KITS

TIE 81091 6 Stud Hub Kit (3000#)
1-3/4” & 1-1/4” w/ lug nuts

TIE 81093 5 Stud UHI Hub Kit (1750#)
1-1/16” & 1-3/8” w/ lug nuts

Spare Tire Covers Vortex Hub Kits

Protect your trailer tires from weather and UV High Performance Lubrication System
damage. The spare tire covers are constructed Hubs are filled with lithium complex grease fortified with rust and oxidation
from a strong black vinyl with a corded edge and inhibitors. While designed not to be touched, there could be a time where
elastic closure for snug fit. Black. it will be necessary to change or add new grease. The bearings can be
lubricated without removing the hubs from the axle. The advantage to this
ORDER NO. DESCRIPTION PRICE system is that new grease saturates the inner outer bearings while pushing
CES 27410 12” $19.01 out the existing grease, unlike systems that just
CES 27420 13” $24.05 push new grease on top of old grease. This insures
CES 27430 14” $25.18 that the hub cavity is completely filled with new
CES 27440 15” $25.73 grease, if ever required.
• “No Touch” lubrication system
• Reusable dust cap is threaded for easy

removal should the need occur.
• 100,000 mile or 6 year limited warranty*
* 6 year full replacement on hub and bearings

Hubs with Bearings ORDER NO. FINISH DESCRIPTION PRICE
TIE 81016 Painted 5 Stud, 1250#, 1” Bearings $90.84
TIE 81017 Painted 5 Stud, 1350#, 1-1/16” Bearings $90.89
TIE 81022 Painted 5 Stud UHI, 1750#, 1-1/16” x 1-3/8” Bearings
TIE 81012 GalvX 5 Stud, 1350#, 1-1/16” Bearings $114.34
TIE 81013 GalvX 5 Stud UHI, 1750#, 1-1/16” x 1-3/8” Bearings $101.48
$126.21

SUPER LUBE Hub Kits

All kits include: bearings, seals, dust
cap, cotter key, and lug nuts or bolts.
SUPER LUBE Kits are Factory pregreased.
Comes with Super Lube dust cap. Also
available in galvanized.
Sold each.

ORDER NO. DESCRIPTION PRICE

AMW 37023 4 Bolt, 1” Hub Complete $39.44

AMW 37024 5 Bolt, 1” Hub Complete $39.44 ORDER NO. DESCRIPTION MATERIAL PRICE
TIE 81045 5 Stud (1750) 1-1/16” & 1-3/8” tapered kit Painted $88.33
TIE 81092 5 Bolt, 1-3/8” x 1-1/16” Hub $48.55 TIE 81049 5 Stud (1750) 1-1/16” & 1-3/8” tapered kit $95.04
Complete Galvanized

218 TRAILER ACCESSORIES

Tire and Wheel
Assemblies

8” Bias Tire and Wheel Assemblies

ORDER NO. TIRE SIZE TREAD LOAD LUGS WHEEL TYPE CAPACITY PRICE AMW 30000
TYPE RANGE LBS
AMW 30010 480-8 K 371 4 Solid Galvanized 590 $50.64 AMW 30010
AMW 30000 480-8 K 371 B 4 Solid Painted 590 $47.20
AMW 30030 480-8 K 371 B 5 590 $50.64
AMW 30020 480-8 K 371 B 5 Solid Galvanized 590 $47.20
AMW 30090 570-8 K 353 B 4 Solid Painted 715 $69.10
AMW 30080 570-8 K 353 B 4 715 $62.07
AMW 30110 570-8 K 353 B 5 Solid Galvanized 715 $69.10
AMW 30100 570-8 K 353 B 5 Solid Painted 715 $62.07
B
Solid Galvanized
Solid Painted

10” Wide Profile Bias Tire and Wheel Assemblies

ORDER NO. TIRE SIZE TREAD LOAD LUGS WHEEL TYPE CAPACITY PRICE AMW 3H390
TYPE RANGE LBS
AMW 3H390 205/65-10 K399 5 Solid Painted 1100 $134.62
AMW 3H440 205/65-10 K399 C 5 Solid Galvanized 1320 $155.62
AMW 30430 205/65-10 K399 D 5 1320 $147.76
D Solid Painted

AMW 3H440

12” Tire and Wheel Assemblies

ORDER NO. TIRE SIZE TREAD LOAD LUGS WHEEL TYPE CAPACITY PRICE
TYPE RANGE LBS
4 Spoke Galvanized 785 $84.17
AMW 30550 480-12 K 353 B 4 Spoke Painted 785 $83.18
B 4 Solid Painted 785 $83.18
AMW 30540 480-12 K 353 B 5 785 $84.17
B 5 Spoke Galvanized 785 $83.18
AMW 30520 480-12 K 353 B 5 Spoke Painted 785 $83.18
B 5 Solid Painted 990 $80.72
AMW 30590 480-12 K 353 C 4 840 $91.92
B 4 Modular Galvanized 840 $93.46
AMW 30580 480-12 K 353 B 4 Spoke Galvanized 1045 $99.33 AMW 30580
C 5 840 $91.92
AMW 30560 480-12 K 353 B 5 Spoke Painted 840 $93.46
B 5 Solid Painted 1045 $99.33
AMW 30672 480-12 K 353 C 5 Spoke Galvanized 1250 $115.66
D Spoke Painted
AMW 30710 530-12 K 353 Solid Painted $125.89
E Spoke Galvanized
AMW 30700 530-12 K 353 AMW 30672

AMW 30760 530-12 K 353

AMW 30750 530-12 K 353

AMW 30740 530-12 K 353

AMW 30800 530-12 K 353

AMW 30861 530-12 K 353

AMW 31218HD ST145/R-12 KR25 5 Modular Galvanized 1520
Radial

AMW 31218HD

TRAILER ACCESSORIES 219

Tire and Wheel
Assemblies

13” Tire and Wheel Assemblies

ORDER NO. TIRE SIZE TREAD LOAD LUGS WHEEL TYPE CAPACITY PRICE AMW 3S160
TYPE RANGE LBS
AMW 3S040 ST175/80D13 K 550 4 Spoke Galvanized 1100 $133.39
AMW 3S060 ST175/80D13 K 550 B 5 Spoke Galvanized 1100 $133.39
AMW 3S050 ST175/80D13 K 550 B 5 1100 $131.88
AMW 3S160 ST175/80D13 K 550 B 5 Spoke Painted 1480 $137.98
AMW 3S140 ST175/80D13 K 550 C 5 Spoke Galvanized 1480 $134.27
AMW 3S302 ST185/80D13 K 550 C 5 1480 $152.81
C Spoke Painted
Spoke Galvanized

AMW 3S140

14” Tire and Wheel Assemblies

ORDER NO. TIRE SIZE TREAD LOAD LUGS WHEEL TYPE CAPACITY PRICE AMW 3S430
TYPE RANGE LBS
AMW 3S430 ST205/75D14 K550 5 Modular Galvanized 1760 $167.30
KR03 C
AMW 32148 ST205/75R14 Radial 5 Modular Galvanized 1760 $189.59
K550 C
AMW 3S450 ST205/75D14 K550 5 Spoked Galvanized 1760 $162.33
AMW 3S560 ST215/75D14 K550 C 5 Spoked Galvanized 1870 $188.41
AMW 3S570 ST215/75D14 KR03 C 5 Modular Galvanized 1870 $180.18
Radial C
AMW 32188 ST215/75R14 5 Modular Galvanized 1870 $209.61
C

AMW 3S560

15” Tire and Wheel Assemblies

ORDER NO. TIRE SIZE TREAD LOAD LUGS WHEEL TYPE CAPACITY PRICE AMW 3S663
TYPE RANGE LBS
AMW 3S650 ST205/75D15 K550 5 Spoke Galvanized 1820 $171.19 AMW 3S650
AMW 3S663 ST205/75D15 K550 C 5 Modular Galvanized 1820 $178.89
KR03 C
AMW 34535 ST205/75R15 Radial 5 Modular Galvanized 1820 $205.83
K550 C
AMW 3S880 ST225/75D15 K550 6 Spoke Galvanized 2540 $229.27
AMW 3S885 ST225/75D15 KR03 D 6 Modular Galvanized 2540 $218.09
Radial D
AMW 32647 ST225/75R15 6 Modular Galvanized 2540 $227.72
D

Golf Cart Tire and Wheel Assemblies

ORDER NO. TIRE SIZE LUGS WHEEL PRICE
TYPE
AMW 90002 18 X8.5-8 $69.27
AMW 40537 18 X8.5-8 4 Solid White $52.78

Replacement Tire only

AMW 90002

220 TRAILER ACCESSORIES

Drum Hubs Hydraulic Drum Brakes

• Drum hubs are pre-greased and pre-assembled The Galv-X system is composed of inorganic polymers which bonds metallic
for clean, quick and easy installation zinc flakes to the metal surface. Black E-coat finish also available.
• Aluminum wheel cylinder
• High pressure grease-packed hub cavity • Stainless steel springs
ensures for 100% bearing lubrication • Brake pads are bonded and riveted with bronze rivets to backing plate
• Superior saltwater performance over standard drum brakes
• E-coated for greater corrosion resistance • Free backing
• Cup, cone, seal and dust cover included

ORDER NO. DESCRIPTION PRICE
TIE 81001 10” (5 Lug) $124.69
TIE 81002 12” (6 Lug) $146.59

ORDER NO. DESCRIPTION PRICE

GALV-X 12” $244.15

TIE 81098 Left & Right Assembly (boxed) $211.40
$83.97
Drum Hubs GALV-X 10” $83.98

Painted brake drum hubs for greater corrosion TIE 81097 Left & Right Assembly (boxed)
resistance. Drum hub only, with cups and studs
TIE 11003 Left Only (bulk)

TIE 11004 Right Only (bulk)

ORDER NO. DESCRIPTION PRICE Lug Nuts & Lug Bolts
TIE 81004 10” Drum Assembly 5 Lug $106.57
TIE 81003 12” Drum Assembly 6 Lug $121.14 Lug nuts and lug bolts are skin
packed 5 to a card.

ORDER NO. DESCRIPTION PRICE
TIE 81172 Lug Nuts, 5 ea. 1/2” $5.83
TIE 81170 Lug Bolts, 5 ea. 1/2” $6.36

Drum Wheel Cylinder Kit Heavy Duty Brake Fluid

Aluminum wheel cylinder for 10” and 12” brakes. Coastal Super Heavy Duty Brake Fluid is a balanced blend
2 each in kit. of premium grade glycol ethers with lubricants and inhibitors
designed for corrosion protection and controlled rubber
swell. Meets or exceeds federal standard FMVSS 116,
DOT 3, and SAE J1703. Super Heavy Duty Brake Fluid
is not compatible with any type of oil. Modern automotive
hydraulic brake systems designed for DOT 3 brake fluid will
suffer damage when filled with oil. 12 oz

ORDER NO. PRICE ORDER NO. CTN. PRICE

TIE 80994 $78.83 COA 890436 12 $3.74

TRAILER ACCESSORIES 221

Stainless Steel Disc Brakes - “G5” Design Eliminator Disc Brakes

Single piston aluminum caliper, patented bi-metal aluminum/stainless “Integral” one piece style vented rotor and aluminum caliper with
piston, oil impregnated bronze bushings, ceramic pads with stainless automotive quality brake pads.
steel backing plates, stainless steel slider pins, GalvX coated hub and • Distinctive 380 aluminum caliper with E-coat finish
galvanized mounting bracket. • Vented rotor with GalvX finish
• Factory pre-installed stainless steel slider pins • Galvanized heavy duty mounting bracket included
• Each kit is for one wheel, includes mounting • Dual brass bleeder valves
• Stainless Steel guide pins
bracket Eliminator Disc Brakes “Integral” one • Bi-metal piston with Stainless Steel piston cup
piece style vented rotor and aluminum caliper • Aluminum caliper with raised ribs dissipates heat up to 5 times faster
with automotive quality brake pads.
than cast iron calipers
ORDER NO. DESCRIPTION PRICE • 2 kits required per axle
TIE 82091 10” Disc Brake Assembly $241.53 • 10” brake bearing size 1-3/8” x 1-1/16”
TIE 82092 12” Disc Brake Assembly $308.49 • 12” brake bearing size 1- 3/4” x 1-1/4”
TIE 81103
Free Backing Solenoid $83.57 ORDER NO. DESCRIPTION PRICE
TIE 82113 10” $184.77
TIE 82100 12” $213.45
TIE 82084
Brake Pads (2) $51.69

Trailer Axle Spindles

Includes: nut, washer and cotter pin.

ORDER NO. DESCRIPTION BEARING SURFACE PRICE

TIE 80060 1-1/4”x7” 1-1/16” $19.37 Safety Chains

TIE 80235 1-3/4”x8-1/4” 1-1/16”x1-3/8” $24.50 Zinc-plated trailer safety chains
are packed in pairs, with S-hook,
Axle Spindles except no. 81205 which is a
single chain.
Replacement Removable spindles for
Tiedown Engineering® Eliminator® torsion

axles. Includes: nut, washer and cotter pin.

ORDER NO. DESCRIPTION LENGTH PRICE

ORDER NO. DESCRIPTION PRICE TIE 81202 Class 2, 3/16” x 28 links 31” $17.25
TIE 80324 Fits 1750 lb. axle $60.17
TIE 81203 Class 3, 1/4” x 26 links 31” $22.96

Eliminator Vented Cap Style TIE 81204 Class 4, 5/16” x 26 links 40-3/4” $42.28
TIE 81205 36” $15.44
Disc Brakes with Vortex Class 2, 3/16” x 36” – single
chain: S-Hooks both ends
High Performance Hubs 10”
Coiled Safety Cable Sets
Now you can get the best of both worlds, cap
style vented disc rotor and cast aluminum 5/16” vinyl coated cables with safety hooks. For use on trailers up to
caliper combined with the maintenance free/ 6500 Ibs. Coil tension eliminates dragging and rattles. Cables extend
extended warranty Vortex hub. This package to 40”. Meets SAE and V-5 standards. Sold in pairs.
will provide cooler running brakes and worry
free performance hubs. GalvX coating for added ORDER NO. PRICE
corrosion protection. Brake assembly includes:
• Ceramic pads and stainless steel backing

plates with a limited lifetime warranty
• Package contains all mounting hardware

including the caliper mounting bracket

ORDER NO. PRICE DUT 6000 $43.17

TIE 82061 $268.58

Safety Chain Trailer Safety Cables (Pack of 2)

• 66” long with “S” hooks on each end. • 40” long, self-coupling steel cables reduce the
• Durable zinc finish. chance of dragging
• Required by law when towing.
• Class III rated up to 5,000 lbs. • Clear vinyl coating protects the cable
• Clam Packed from corrosion and protects the finish
of items being towed

• 5,000 lb. pull strength
• Perform to SAE J684 towing specs

for Class III towing applications

ORDER NO. PRICE ORDER NO. PRICE
MAS 2829DAT $20.95
ACM 40201 $23.57

222 TRAILER ACCESSORIES

Flexible Brake Line Kit Trailer Brake Flush Kit

Designed to be used on trailers using either surge brake Stop saltwater corrosion of drum brake
actuators or power brake actuators (vacuum/hydraulic, air/ components. Easy to install and easy to use.
hydraulic, electric/hydraulic). Adapts to all trailers.
• Brake lines provided are DOT/Flexible hoses approved for use on all
trailer brakes including disc brakes with floating calipers. ORDER NO. PRICE
• All fittings are brass for the ultimate in corrosion resistance.
This brake line kit is designed to be used to replace existing brake lines TIE 81107 $67.14
or installed on a trailer that has not had brakes before.
Kit includes: Complete Drum
2- 18” DOT flex hose, 1- 76”
DOT flex hose, 1 - 240” PSI hose, Brake Installation Kit
5-cable ties, 2-Union “T”
connectors, 2 “T” clamps, Kit comes with everything
8-self taping screws & needed to replace
4 cable clamps. trailer’s drum or disc brakes for faster
stopping power. Drum brake actuator
ORDER NO. PRICE features cast ball clamp, oversized
master cylinder. Includes pair of
TIE 80326 $91.82 GalvX coated drum brakes and drum
hubs, drum brake actuator & brake
Tandem Axle Brake Line Kit line kit. Fits 13”, 14” and 15” wheels.
DOT 3 brake fluid not included.
All in one kit includes hardware for tandem axle trailers.
Kit combines brake line kits #80326 & #80327. ORDER NO. DESCRIPTION PRICE
Kit includes: TIE 82407 10” Drum Brake Kit $560.87
4- 24” DOT flex hose, 2- 76” DOT flex hose, TIE 82408 12” Drum Brake Kit $717.11
1- 240” DOT flex hose, 1- 38” DOT flex Hose,
9- cable ties, 4- Union “T” connectors,
4- “T” clamps, 14- self taping screws,
6- cable clamps

ORDER NO. PRICE

TIE 80328 $153.43

Nut/Washer/Cotter Pin “Add On” Tandem Axle Brake Line Kit

ORDER NO. PRICE This brake line kit is designed to be used with the Tie Down Engineering
Brake Line Kit # 80326.
TIE 81169 $5.16 Kit includes:
2- 24” DOT flex hose, 1- 76” DOT flex hose,
Flexible Brake Line Kit 1 - 38” DOT flex hose, 4-cable ties,
2-Union “T” connectors, 2 “T” clamps,
Two 1/8” x 24” flexible 3000 psi. brake lines are ideal for disc 8-self taping screws & 2 cable clamps
brake installation requirements. Connects from brake caliper
to female end of brake line or can be connected to existing ORDER NO. PRICE
steel lines with adapters included in the kit. Flexible line
connection required TIE 80327 $62.73
on G4 disc brakes.
Self-Coiling
ORDER NO. PRICE
Hitch Cables
TIE 81099 $48.54
Hitch cables exceed SAE J684 standards
Complete Disc Brake Installation Kits
for trailer coupling and automotive type
Kit comes with everything needed to replace trailer’s drum
or disc brakes for faster stopping power. GalvX coated rotors hitches. Plus, they are NMMA Certified!
for corrosion resistance. Marine grade aluminum calipers
with stainless steel pistons and slider pins. Disc brake actuator features Each pair are 36” in length. Class 2, 3500# Trailer
cast ball clamp, oversized master cylinder, with back flow style solenoid
installed. Includes pair of GalvX coated vented rotor disc brakes, disc Black vinyl jacketed 59537
brake actuator, brake line kit ORDER NO. DESCRIPTION PRICE Class 3, 5000# Trailer
and free backing solenoid.
Also includes brake TIE 59537 Class II 3,500lb $25.54 Black vinyl jacketed 59541
hoses, brass fittings and TIE 59541 Class III 5,000lb $33.12 Class 4, 7000# Trailer
attachment hardware. Fits TIE 59548 Class IV 7,000lb $34.19
13”, 14” and 15” wheels. Black vinyl jacketed 59548
DOT 3 brake fluid
not included. with safety latch hook

ORDER NO. DESCRIPTION PRICE Brake Pad Sets
TIE 82405 10” Disc Brake Kit $674.45
TIE 82406 12” Disc Brake Kit $779.70 Replacement pads for 10” & 12”
disc brakes. (Full axle replacement,
four pads.)

ORDER NO. PRICE

TIE 81100 $52.78

TRAILER ACCESSORIES 223

Reverse Lock Out Solenoid “Raptor” Model Actuators
16,500 lbs. Capacity
If your actuator does not have a reverse lock out lever or switch, a
reverse lockout solenoid should be installed at the actuator before Accepts 2-5/16” trailer hitch balls with
installation of disc brakes. Can be used on drum brakes as well. a 16,500lbs. capacity only.

ORDER NO. DESCRIPTION PRICE
$525.56
ORDER NO. PRICE TIE 70425 Disc Brake Ready w/ Reverse Lock-Out Solenoid

TIE 81103 $83.57

Disc and Drum Brake Actuators Prevents Trailer Wheel Bearing Failure

(6600 lb. and 8000 lb. capacities) Millions of bearings owe their lives to it!
• Keeps water and dirt out of hubs
The unique all aluminum master cylinder incorporates the shock absorber • Makes boat trailer wheels safely submersible
• Ends the mess of repacking bearings
into the master cylinder assembly. This exclusive product feature was • Pressure relief feature protects hub seals,

designed into our master cylinder to provide the tow vehicle operator with prevents overfilling
• Quick, positive lubricant level check
a warning signal when the brake fluid is at a low level. • Made of steel and 100% inspected for long

• Cast ball clamp • Extended latch lever • 2” Ball term tight hub fit
• Heavy chrome plated barrel
• Exterior emergency safety cable lock and release • Stainless steel internal parts

• Vinyl-coated coiled emergency stop cable

• Safety lock pin with back up position ORDER NO. SIZE BEARING PRICE
BBD 42102 1.98 L44643, L44649, L44640 $27.23
• Emergency safety cable ball stop BBD 41202 1.781 $24.64
BBD 43102 2.328 LM11949 $30.02
BBD 42440 2.441 LM67048 Hub not Counterboard $39.83
BBD 42710 2.717 LM60748 Hub Counterboard, 15123 and others $45.47

14124, 14125A

ORDER NO. DESCRIPTION PRICE Bearing Buddy II
TIE 82400 6600 lb. Disc Brake Actuator $259.45
TIE 82402 8000 lb. Disc Brake Actuator $386.87 With Auto Check. Quick, positive visual check for
TIE 81103 lubricant level and internal hub pressure. Fits hubs with 1.98” opening.
TIE 82401 Free Backing Solenoid $83.57
TIE 82403 6600 lb. Drum Brake Actuator $228.90 ORDER NO. PRICE
8000 lb. Drum Brake Actuator $355.97 BBD 42202 $27.86

SuperLube Dust Cap Bra

1 pair of 1.980” diameter SuperLube dust The Bearing Buddy* automatic pressure relief feature will allow the
caps with rubber center plugs. excess grease to escape. While trailering, this grease can be thrown
onto wheels. Bearing Buddy Bra fits over the Bearing Buddy to
eliminate this condition.

ORDER NO. DESCRIPTION PRICE ORDER NO. DESCRIPTION PRICE
BBD 70017 Fits 1781 & 1810 $3.91
BBD 70019 Fits 1980, 1980T,1938 & 1968 $3.91
BBD 70023 Fits 2328, 2441, 2717 & 2562 $3.91

TIE 81168 Dust Cap assembly $11.79

TIE 81174 Rubber Grommets F/caps $4.18

Dust Caps Stainless Steel Wheel Bearing Protector

Dust cap, 1.98”. The Stainless Steel Bearing Protector keeps water
and dirt from all trailer bearings, period. The protector
ORDER NO. PRICE is a stainless steel barrel that is pressed in the trailer
wheel hub in place of the dust cap.
TIE 81167 $4.07
ORDER NO. SIZE BEARING PRICE
BBD 42104 1.98 L44643 $36.22

224 TRAILER ACCESSORIES

Bearing Races and Seals Bearing Sets

One set includes 2 bearings with
races, 1 grease seal and 1 dust
cap and cotter pin. Six to a carton.
Packaged 1 set per card.

ORDER NO. HUB DESCRIPTION PRICE ORDER NO. SIZE OUTER HUB I.D. PRICE
DUT 6202 1” Bearing 1.980 $23.71
DUT 6435 1” Race 1” (L44610) $5.47 DUT 6203 1-1/16” Bearing 1.980 $24.22
DUT 6420 1” Seal 1”-1-1/16 $1.98 DUT 6204 1-1/4” Bearing 2.328 $27.91
DUT 6426 — $10.29 DUT 6205 1-1/16”x3/4” Bearing 1.781 $26.34
DUT 6428 — Brg 1-1/16(L44649) $8.99 DUT 6206 1-1/4”x3/4” Bearing 1.781 $26.91
DUT 6437 — Brg1-3/8(L68149) $5.31 DUT 6207 1-3/8” x1-1/16” Bearing 1.980 $24.22
DUT 6422 — Race 1-3/8(L68111) $2.26

Seal 1-3/8”

Grease Caps Spindo® Seal

Made from Hot Dipped, Pre-Galvanized Steel A high quality seal system
designed to end grease
A = Flange diameter (O.D.) leakage. Seals will last
C = Flange length many years because they
D = Overall height ride on a permanently
S = Spindle size smooth surface, constantly
greased by the action of
ORDER NO. A CD S PRICE the Bearing Buddy.

FUL 1925 1.986 .37 1.16 1” $3.59 ORDER NO. USE WITH BEARING BUDDY PRICE
INNER BEARING
FUL 1926 2.330 .28 .95 1-1/4” $4.20

FUL 1927 2.448 .31 1.34 1-1/2” $4.38 BBD 60001 L446U4S3E WITH 1980 $18.56

BBD 60002 LM48O54U8T,ELR68B1E49ARI1N9G80, 1968, 2562 $18.56

FUL 1928 1.785 .28 1.16 3/4” $3.59 BBD 60005 L44649 1980 $18.56

Vortex Replacement Replacement Trailer Springs

Bearing & Grease Kits Heavy duty spring steel. Includes 9/16” ID nylon bushings. Sold in pairs.
Capacity ratings are per spring.
Kit includes: bearings, cup,
seal, Super Lube dust cap and Slipper Springs – Slipper Springs –
3 oz. tube of Lucas Marine
grease. Radius End Flat End

ORDER NO. DESCRIPTION PRICE 24-5/8” L (A) x 4” H (C), 30” L (A) x 4-7/8” H (C),
TIE 81132 1” Bearing $30.40 Arch length 23-1/2” L(B) Arch length 28” L(B)
TIE 81133 $30.23 500 lb. capacity 1,000 lb. capacity
TIE 81134 1-1/16” Bearing $31.93 (per spring) (per spring)
1-3/8” Bearing • 2 leaves – P/N 81194 • 2 leaves – P/N 81197
1,000 lb. capacity 1,850 lb. capacity
(per spring) (per spring)
• 4 leaves – P/N 81196 • 4 leaves – P/N 81198

Precision Tapered ORDER NO. PRICE ORDER NO. PRICE
TIE 81194 $62.47 TIE 81197 $93.63
Roller Bearing Kits TIE 81196 $88.86 TIE 81198
$149.46
Each kit includes: 2 cones,
2 cups, seal,
cotter pin and dust cap.

ORDER NO. DESCRIPTION PRICE Double Eye Springs

TIE 81111 1” Bearings w/ Dust Cap $19.15 25-1/4” L (A) x 3” H (C)
2,500 lb. capacity
TIE 81116 1-1/16” Bearings w/ Dust Cap $19.15 (per spring)
• 4 leaves – P/N 81199

TIE 81126 1-1/4” Bearings w/ Dust Cap $23.03 ORDER NO. PRICE

TIE 81141 1-3/8” x 1-1/16” Tapered Bear- $20.01 TIE 81199 $122.26
ings w/ Dust Cap

TRAILER ACCESSORIES 225

Shackle Links Rear Spring Hangers Front Spring Hangers

Steel shackle links are used to mount double Solid steel hangers can be used on rear Solid steel stock hangers for use on slipper
eye springs. Suitable for medium duty axles, slipper springs 1-3/4” to 2” wide. 5,200 – and double eye springs that are mounted on
1,000 – 3,500 lbs. capacity. Pre-drilled for 8,000 LB. capacity for medium duty axles. 1,000 – 3,500 lb capacity, medium duty axles.
9/16” bolt 1/4” stock. Master pack: 12 cards. Pre-drilled for 9/16” bolt. Master pack: 12 cards.
Master pack: 12 cards.

ORDER NO. PRICE ORDER NO. PRICE ORDER NO. PRICE

TIE 86276 $3.55 TIE 86275 $4.22 TIE 86274 $5.00

Square U-Bolts, Square and Round Hot Dip
Galvanized U-Bolts
Zinc-Plated
Hot dip galvanized to prevent rusting.
Used for mounting brackets to trailer frame. Includes lock washers and nuts. packed/
Zinc-plated to help prevent rusting. Includes each. Master pack: 12 cards
flat washers and nyloc nuts.

ORDER NO. DESCRIPTION PRICE ORDER NO. DIA. X WIDTH X LGTH. PRICE
PAIR SQUARE
TIE 86204 $10.14 TIE 86220 $6.80
TIE 86205 1/2” X 2-1/8” x 4” $10.39 TIE 86221 7/16” x 1-9/16” x 3-9/16” sq. $7.89
TIE 86206 1/2” x 3-1/8” x 3” $10.80 TIE 86222 1/2” x 1-9/16” x 4-9/16” sq. $7.80
TIE 86207 1/2” x 3-1/8” x 4” $11.01 TIE 86223 1/2” x 3-1/16” x 3-13/16” sq. $8.34
TIE 86208 1/2” x 4-1/8” x 3” $11.24 TIE 86227 1/2” x 2-1/16” x 4-13/16” sq. $5.79
TIE 86209 3/8” x 2-1/8” x 4” $10.08 3/8” x 1-5/8” x 3-9/16” sq.
TIE 86210 3/8” x 3-1/8” x 3” $10.39 TIE 86224 $5.96
TIE 86211 3/8” x 3-1/8” x 4” $10.58 TIE 86225 ROUND $8.63
3/8” x 4-1/8” x 3” TIE 86226 3/8” x 1-3/4” x 4-13/16” rd. $10.29
TIE 86214 $6.70
TIE 86215 EACH $7.15 1/2” x 2-3/8” x 5-3/8” rd.
TIE 86229 1/2” X 3-1/16” x 3-13/16” $5.75 1/2” x 3-1/16” x 6-11/16” rd.
TIE 86230 1/2” X 2-1/16” x 4-13/16” $5.75
TIE 86231 7/16” X 2-1/16” x 4-5/16” $5.51 Axle Tie Plate Kits
7/16” X 3-1/16” x 3-5/16”
7/16” X 3-1/16” x 4-5/16” Each kit contains:
• 4 U-bolts
• 2 five hole tie plates
• 8 lock nuts

ORDER NO. DESCRIPTION PRICE

TIE 81175 Fits 1.90” round axles $26.59

Universal Axle Tie Plate TIE 81180 Fits 2-3/8” round axles $33.11

Universal tie plate fits 1.90”, 2” and 2-3/8” TIE 81185 Fits 2” square axles $40.19
axle/U-bolt patterns. One part no. covers most
of your needs. Master pack 12 pair; 2 per card.

ORDER NO. PRICE

TIE 81186 $9.30 Large Frame U-Bolt Kit

Fluted Shackle Bolts U-bolts for mounting to frames up to 3” wide x 5-1/4” high. Leg length
is 6” with a thread length of 2”. 4 U-Bolts per kit.(nuts and washers
For use with spring hanger brackets. Fluting prevents the bolt not included).For use with our Roller Guide-On, Post Guide-On and
from turning, which can wear hanger brackets. Grade 5 steel. Bunkboard Guide-On. Genuine replacement part for C.E. Smith Part
9/16” x 3” bolts with nuts. Skin pack two. Numbers 27600, 27610, 27620, 27625,
Master pack: 12 cards 27640, 27645, 27660.
5’ Bunk board style guide-ons
(P/N 27600) require (2) kits,
all other guide-ons require (1) kit.

ORDER NO. PRICE ORDER NO. PRICE

TIE 86250 $9.15 CES 11416 $29.09

226 TRAILER ACCESSORIES

HDPE Plastic Fenders Tread Brite Aluminum

High density polyethylene (HDPE) is corrosion proof with molded-in color Fenders
and is mar resistant. Integral step pads are slip resistant and capable of
supporting heavy weights to 300 lbs. A built-in skirt on each fender helps Heavy duty stamped fenders are made
shield boats, automobiles, PWC’s and other valuable cargo from most dirt from 12 gauge/ .08” aluminum. Fenders can be
and debris which may cause damage to fiberglass and other finishes. All drilled to fit a variety of mounting options.
fenders can be adapted to a variety of mounting methods. Fenders with Mounting brackets not included.
step pads can also be adapted to accept a variety of side markers or
clearance lights. Fenders are molded in standard white.

ORDER NO. WHEEL SIZE DIMENSIONS (W X L X H) PRICE
8”x 31.5” x 13.125” $41.35
TIE 44837 13”-15” 9”x 33.75” x 14.875” $44.88

TIE 44836 13”-15”

Style D Fender

ORDER NO. TIRE SIZE PRICE Tread Brite Aluminum Fender

FUL 508572 12” $27.58 Dress up your trailer with a Tread-brite Aluminum fender.
9” Wide, 32” long and 16” tall, is
FUL 508573 13” $64.33 a direct replacement for many OEM trailers.
Made from 16-gauge aluminum with a raised
FUL 508574 14” $50.51 tread pattern. Both sides of the fender are
rolled (curved). Made in the USA

Plastic Fender ORDER NO. PRICE

Upgrade your trailer with TIE 44492 $34.12
these high impact white
polyethylene fenders. Designed for Galvanized Metal Fenders
normal and low profile tires. TIE 17026
fits 8” to 12” wheels. TIE 44332 fits 13”, Heavy duty stamped fenders are made from
14” and 15” wheels on single or multiple 16 gauge galvanized steel. Fenders can be
axle setups. drilled to fit a variety of mounting options.
Master pack 4:
ORDER NO. SIZE DIMENSIONS PRICE
7-3/4” W x 21” L x 5” H $14.98
TIE 17026 Small, for 8” to 12” wheels 11-3/8” W x 45” L x 11” H $51.90

TIE 44332 Large, for 13” to 15” wheels

ORDER NO. WHEEL SIZE DIMENSIONS PRICE
W-7”, L - 20.0”, H- 6” $18.56
Hex Head Bolts TIE 86264 8” W- 7”, L - 23.5”, H - 6.5” $20.41
W - 8”, L - 27.5”, H - 11” $28.35
Use for mounting brackets, couplers, TIE 86265 12” W - 9”, L- 31.5”, H-13” $34.05
and winch stands. Grade 5, zinc-
plated steel. Skin pack contains four bolts, TIE 86266 13”
washers and nyloc nuts.
TIE 86267 14 - 15”

ORDER NO. DESCRIPTION PRICE High Lift, Fixed Mount
TIE 86256 7/16” x 1” $7.09
TIE 86257 Jack with Footplate
1/2” x 3-1/2” $11.77
This zinc plated, high strength, steel square
Fender Brackets tube, drop foot trailer jack will meet your
toughest needs. The adjustable drop leg
Galvanized steel brackets for mounting metal has a 5/8” pin and allows for quick height
or plastic fenders. adjustment, minimal cranking effort and
Brackets for 8” and 12” metal fenders are available in flush maximum lift. The 4” x 6” foot plate provides
mount and offset, one bracket used per fender. The brackets for small load stability, while a zerk fitting allows ease
8” and 12” plastic fenders mount flush, two required for each fender. of gear train lubrication. Provides up to
Step brackets for large plastic fenders are sold each. 28 inches of total travel (15” screw travel,
13” drop leg adjustment). All necessary
TIE 86260 hardware is included for quick installation
with common hand tools. Fits on trailer
tongues up to 3” x 5”.

TIE 81231 TIE 44141

ORDER NO. DESCRIPTION PRICE
TIE 86260 $24.03
TIE 86262 Offset Brackets (2) for 8” & 12” metal fenders $22.66 OVERALL LENGTH
TIE 81231 $17.37
TIE 44141 Flush Brackets (2) for 8” & 12” metal fenders $12.58 ORDER NO. CAPACITY RETRACTED EXTENDED PRICE

Flush Brackets (2) for small plastic fenders FUL HD25000101 2500 lbs. 23.50” 37.25” $137.58
FUL HD50000101 5000 lbs. $239.65
Step Bracket,(1) for large plastic fenders 22” 37.25”

1000 lb. Swivel Jack with 8” Wheel TRAILER ACCESSORIES 227

Features heavy duty 8” slotted wheel to maneuver over 6400 Pivoting Tongue Jack
rough terrain when moving trailer manually. Reinforced
wheel bracket also adds strength. Pivoting, screw type tongue jack has an 1000 lb. tongue
1/2” swivel pin weight capacity. Jack operates on a precision rolled
Zinc TUFFPLATE® finish Acme thread which is an extra heavy duty screw type
Fits tongues up to 3” x 5” drive. Comes complete with all necessary hardware for
mounting. Zinc-plated with TUFFPLATE® finish. Fits
ORDER NO. PRICE square tongues up to 3” x 5”.
DUT 6430 $99.75
ORDER NO. PRICE
DUT 6400A $77.75

Swivel Tongue Jack Pivoting Tongue Jack

• Screw type, swivel side mount Pivoting screw-type tongue jacks are easily rotated to a vertical use position
• 1200 lb. capacity and reduce cranking to a minimum. The jack can be rotated to a towing
• 11” travel position by operating the spring-loaded locking mechanism.
• 24” max. tongue height • Totally enclosed outer tube retards sand and dirt from coming in contact
• 3” x 5” max. tongue size
with miter gears and heavy duty Acme screw
ORDER NO. PRICE • All necessary mounting hardware included. Fits square
DUT 3400 $63.47
tongues up to 3” x 5”. Can be adapted for round tongue
Pivoting Screw-type mounting.
• Floating miter gears allow for proper clearance
Tongue Jack resulting in easier operation
• Extra lift for high mounted bumper applications.
Easily rotated to a vertical use position and reduce • All bright zinc plated TUFFPLATE® finish for
cranking to a minimum. The jack can be rotated to longer life
a towing position by operating the spring-loaded • Maximum maneuverability from offset swivel caster
locking mechanism. Standard pack is four-bolt assembly
mounting system unassembled. 1500 pound tongue • 1000 lb. capacity, 12” travel
weight capacity, zinc-plated TUFFPLATE® finish • Made in U.S.A.
and tough polypropylene wheel. Maximum tongue
height 28-1/2”. Maximum tongue size 3” x 5”. ORDER NO. PRICE

ORDER NO. DESCRIPTION PRICE DUT 6709 $106.68
DUT 6800A 12” Travel $151.79
F2 Trailer Jacks
Retaining Ring Swivel Marine Jacks 1,600 lbs. Lift Capacity

Zinc, with 1000 lbs. lift capacity and a 6” diameter caster. Precision extruded aluminum alloy inner & outer tubes, combined with twin
Designed for use with marine and utility trailers. Includes alignment bushings, ensure a precision alignment. The anodized finish keep
all necessary mounting hardware. Fits up to a 3” x 5” the tubes virtually corrosion free. Revolutionary adjustable mount & swivel
trailer frame. system. Engineered to be the strongest swivel mechanism in the industry, it
Overall Length: Retracted 12.8” is also the first mounting system that can be adjusted to any desired height.
Integrated pull pin with ergonomic grip makes it easy to
Extended 22.8” swivel into position for lifting or transport. Smooth wheel
performance. Twin track 7” diameter wheels are designed
ORDER NO. DESCRIPTION PRICE to roll independently to make changing direction smooth
FUL EJ10000101 Boxed $53.00 and effortless.
FUL EJ10000301 Bulk $45.77 • 8” of mount travel
• 10” of screw travel Total 18” of overall travel
• Fits bolt on 3” and 4” tongues
• Fits weld on 3” and up

ORDER NO. DESCRIPTION PRICE
FUL 1413020134 Twin track 7” wide $277.73

XLT 1,500 lbs. Trailer Jack F2 Trailer Jack w/Footplate
2000 lbs. Lift Capacity
•TruTurn 360 Castering System
•Travel Distance Length: 12 inch • Heavy Duty Articulating Footplate - 7” diameter cast
•1500# Capacity footplate provides superior stability
•8” Wheel Diameter
•5 Pitch Acme Screw - 35% Faster • Unique ball and socket connection between jack and
•XLT Premium Sharkskin finish for protection from salt footplate allows for whatever articulation is required to
water and salt spray elements accommodate uneven surfaces.
•Swing Away, Bolt-On (Mounting Hardware Included)
•Grease Fittings • 13” of swivel mount height adjustment
•5 Year Warranty • LIMITED LIFETIME WARRANTY

ORDER NO. PRICE ORDER NO. PRICE
FUL 141133 $172.51
FUL 1413230134 $294.78

228 TRAILER ACCESSORIES

Bolt-Thru Swivel Jacks Non Skid Pads

This patented mount uses 3-D formed heavy gauge steel stampings and a The Attwood Non Skid pads are great on trailers, boats and
proprietary bushing material for a mount with minimal deflection and docking. Applied correctly, the proven adhesive system is
maximum support. Will accommodate up to 3” X 5” trailer frames. long lasting and offers one of the best slip resistant surfaces
available. These easy to install pads are ideal in almost any
application. Contains 2 pads 6” x 12”

ORDER NO. PRICE
ATT 62604 $10.79

XP100101 XP150101 XPD15L0101

ORDER NO. MAX. OVERALL LENGTH WHEEL PRICE
DIAMETER
CAPACITY RETRACTED EXTENDED $118.55 Trailer Boarding Plank
6” $138.51
FUL XP100101 1200 lbs. 12.75” 22.75” 8” $176.07 • Strong and durable polyethylene construction
Dual 6” • Mounts easily to trailer
FUL XP150101 1500 lbs. 12.75” 22.75” • All hardware included
• Anti-skid pads for sure footing
FUL XPD15L0101 1500 lbs. 12.75” 24.75” • Never rusts or corrodes

6” Trailer Jack Wheel Length: 30” Width: 9.5” Depth: 1”

Standard replacement wheel for most trailer
jacks. Grooved tread and steel hub bushing
for easy rolling under load.

ORDER NO. PRICE

DUT 6806 $14.82 ORDER NO. PRICE

WSS 101 $51.76

Trailer Jack Wheel Dock Heavy Duty Trailer Dolly

Prevent your trailer tongue wheel from rolling on • Includes 1-7/8” trailer ball and handles up to
the pavement or sinking into the grass or soft 700 lbs. tongue weight
ground. Heavy duty, durable dock is easy to store
and transport. • Hand dolly with 4.10/3.50 x 6 pneumatic tires with
12” overall diameter makes moving boat, camper or
ORDER NO. PRICE any trailer a breeze even on grass or sand

CMC 44632 $21.50 • Smooth, durable, powder-coat painted finish
• Long handle with grips for leverage, heavy bracing

Wheel Chocks

Stop unwanted movement – keep your vehicle
and trailer from rolling away with sturdy CAMCO
WHEEL CHOCKS. They keep your trailer in
place so you can re-hitch with confidence. Solidly
constructed of durable hard plastic with
UV inhibitors. USA

ORDER NO. PRICE

CES 27550 $397.25

ORDER NO. DESCRIPTION PRICE
CMC 44472 With Rope $5.21
CMC 44412 $4.76
Without Rope

TRAILER ACCESSORIES 229

Aluminum Removable Ball Mount Heavy Duty 5/8” Hitch Pin & Lock

For use with most square receivers. • Easy to use key-lock design helps prevent theft.
Gross Trailer Weight = 8,000 lbs. • Zinc plated steel pin.
Tongue Weight = 800 lbs. • Vinyl cover protects key hole.
Receiver Tube Size = 2” x 2” • May be used in place of hitch pins.
Shank Hole Size = 1” • Two keys included.
• For 2” or 2-1/2” receivers

ORDER NO. PRICE

ORDER NO. LENGTH RISE DROP PRICE ACM 88034 $14.70

FUL 21381 9.88” 1” 2” $92.99

Hitch Pins & Clips Hitch Adapter 2-1/2” to 2”

51021 - Class II, 1/2” dia. pin & clip, • Converts a 2 1/2” receiver hole to a 2” receiver hole
fits 1 1/4” receiver. • Adapts 2” ball mount and accessories to a
51031 - Class III, 5/8” dia. pin & clip,
fits 2” receiver. 2 1/2” receiver tube

ORDER NO. PRICE ORDER NO. PRICE
ACM 51021 $6.89 ACM 954258 $26.34
ACM 51031 $6.89
Step Bumper Hitch
Receiver Pin & Lock
88303 – Engineered to bolt to any
51032 5/8” dia. pin fits 2” receiver. step bumper. Receiver opening is 2”.
Locks ball mount in hitch. The hitch is powder coated black.
Maximum capacity is 500 lbs. tongue
weight and 5000 lbs. GTW.

ORDER NO. PRICE ORDER NO. PRICE
ACM 51032 $14.67 ACM 88303 $69.49

Ball Mounts

ORDER NO. FINISH DROP RISE SHANK LENGTH HOLE SIZE RECEIVER OPENING PRICE

ACM 88212 CLASS II RATED TO 6,000 LBS. GTW 1-1/4” $43.44
ACM 88214 1-1/4” $54.34
ACM 88216 Black 1-1/4” 5/8” 6-1/2” 3/4” 1-1/4” $56.28
Black 4”
ACM 883228 Black 6” 2-7/8” 8” 3/4” 2” $25.25
ACM 883248 2” $26.14
ACM 883268 4-3/8” 8” 3/4” 2” $34.25

ACM 773228 CLASS III RATED TO 5,000 LBS. GTW 2” $26.53
ACM 773248 2” $28.42
ACM 773268 Black 2” 3/4” 6-3/4” 1” 2” $39.82
ACM 783268 Black 4” 2” $58.31
Black 6” 2-1/4” 8” 1”
ACM 763248 2” $81.25
4-1/4” 8” 1”

CLASS III RATED TO 6,000 LBS. GTW

Black 2” 3/4” 9-3/16” 1”
Black 4”
Black 6” 3-1/4” 10” 1”
Chrome 6”
4-1/4” 11-1/8” 1”

4-1/4” 11-1/8” 1”

CLASS IV RATED TO 12,000 LBS. GTW

Black 4” 3” 9-1/4” 1-1/4”

230 TRAILER ACCESSORIES

Drop N Go Auto Latch Coupler 34” Fold-Away Hinge Kits

This coupler features technology that allows the coupler, when set Allows 34” of the trailer tongue to fold-away, letting a boat trailer fit
in the closed (tow) latch position, to auto-latch onto the hitch ball inside most smaller garages. Installs easily on an existing trailer beam.
when set on top of the ball with minimal weight. Incorrect latching Unique patented offset design for superior on road performance.
and/or forgetting to properly close the latch mechanism is the #1 Provides a professional look with a design that hides manually cut
reason for trailer separation from the tow vehicle. surfaces. Excellent corrosion protection with Z-Max 600-hour clear zinc
Uses a 2” ball and fits on a 3” channel tube. finish. Includes fold-away hinge, mounting hardware, pivot bolt and
pivot pin/clip.

ORDER NO. PRICE
TIE 82420 $57.92

Quick-Lock Class 1 Coupler ORDER NO. DESCRIPTION PRICE
FUL HDPB330101 For 3x3 Tongue 3500 lbs. $119.73
Non-passenger carrying trailers with a gross weight FUL HDPB340101 For 3x4 Tongue 5000 lbs. $138.82
not to exceed 2000 lbs.;
No. 13428 – Housing width 2” I.D. for 1-7/8” ball. Fas-Lok™ Couplers
No.13628 – Housing width 2-1/2” I.D.; 2-13/16”
O.D. For 1-7/8” ball. These zinc-plated replacement
No. 13728 – Housing width 3” I.D. for 1-7/8” ball. couplers for 2, 2-1/2, and 3 inch trailer
ORDER NO. PRICE tongues come with the Fulton FAS-
DUT 13428 $23.70 LOK locking lever featuring a heavy
DUT 13628 $23.70 duty safety latch, padlock hole, and
DUT 13728 $24.27 serviceable ball clamp assembly.

Quick-Lock Class 2 Coupler ORDER NO. BALL SIZE SAE CLASS G.V.W. TONGUE PRICE
FUL 112500101 1-7/8” I 2000 2-1/2” Wide $30.02
(Non-passenger carrying trailers with a gross FUL 223000101 2” II 3500
weight not to exceed 3500 lbs.) 3” Wide $32.08
No. 13885 – Housing width 3” I.D. for 2” ball.
No. 13889 – Housing width 2” I.D. for 2” ball. Coupler Grip No. 6295

ORDER NO. PRICE Bolts onto coupler with universal mounting holes. Fits 1-7/8” and 2”
DUT 13885 $31.59 couplers. The coupler grip provides a convenient and safer way to guide
DUT 13889 $31.59 trailer tongue to and from the coupler ball. Ideal for personal watercraft
and other light tongue weight trailers. Zinc-plated, non-corrosive finish
Quick-Lock Class 3 Coupler with large comfortable grip. 6 per carton.

(All types of non-passenger carrying trailers ORDER NO. PRICE
with a gross weight not to exceed 5,000 lbs.) DUT 6295 $11.89
No. 13897 – Housing width 3” I.D. for 2” ball.
ORDER NO. PRICE
DUT 13897 $33.15

Coupler Repair Kit

For D-L® quick-lock couplers only. These kits cannot
be interchanged with component parts of any other
D-L® models or other manufacturers’ couplers.
For class 1 couplers, 1-7/8” ball size. DUT 62561
For class 2 and 3 couplers, 2” ball size. DUT 62572

ORDER NO. PRICE
DUT 62561 $20.04
DUT 62572 $27.31

TRAILER ACCESSORIES 231

Combo Ball Mount Kits HEAVY-Duty Trailer Ball

Comes with 2” ball. Max trailer weight 2-5/16” x 1-1/4” x 2-1/8” shank
6000 lbs. Max tongue weight 600 lbs. • For use with heavy-duty ball mounts
Comes with 5/8” hitch pin and clip. • Rated to 12,000 lbs.
Fits Class III hitch. • 1-1/4” Diameter shank
• Solid shank design
• Bright chrome finish

ORDER NO. BALL SIZE DROP FINISH CAPACITY PRICE ORDER NO. PRICE
ACM 78221 2” 2” Chrome 6000 lbs. $51.74
ACM 77221 2” 2” 6000 lbs. $35.11 ACM 7017 $26.69
ACM 77421 2” 4” Black 6000 lbs. $40.82
Black

Solid Steel Shank Chrome Finish Pro Series™ Adjustable Tri-Ball Mount w/Step
Trailer Balls
• Adjustable height - Perfect for towing multiple trailers of varying heights
and couplers

• Height adjusts up to 10.5”
• Rated to 14k GTW
• 1-7/8” (2,000 lbs rating), 2” (10,000 lbs. GTW), and 2-5/16” (14,000 lbs.

GTW) Hitch balls
• Fits 2” receivers and rated up to 14K GTW
• Cast 2” Square shank, variable height capability
• Integrated hitch step with grip pattern
• Knurled bolt pins with secure lanyard
• Black powder coat finish

ORDER NO. FINISH TOWING BALL SHANK SHANK PRICE
CAPACITY DIA. DIA. LENGTH
ACM 7507 Chrome $14.12 ORDER NO. PRICE
ACM 7508 Chrome 5,000 lbs. 1-7/8” 1” 2-1/8” $13.88 FUL 63070 $289.29
ACM 7526 Chrome 5,000 lbs. 2” 1” 2-1/8” $13.14
ACM 7527 Chrome 2,000 lbs. 3/4” 1-5/8” $13.33
ACM 7528 Chrome 3,500 lbs. 1-7/8” 3/4” 1-5/8” $20.32
ACM 7529 Chrome 6,000 lbs. 2” 1” $21.77
ACM 7536 Chrome 10,000 lbs. 1-1/4” 2” $14.27
ACM 7537 Chrome 2,000 lbs. 2-5/16” 3/4” 2” $14.16
3,500 lbs. 2-5/16” 3/4” 2-5/16”
1-7/8” 2-5/16”

2”

Multi-Ball Mount

• Welded steel trailer balls
• Black powder coat finish
• Fit 2” x 2” receiver openings
• 5/8” hitch pin hole size

ORDER NO. BALL SIZE RATING G.V.W. PRICE 963008 962008
ACM 963008 1-7/8”, 2” & 2-5/16” 2,000/5,000/10,000 $94.48
ACM 962008 $56.32
1-7/8” x 2” 6,000/10,000

Solid Steel Shank Chrome Finish Coupler Locking Pins
Trailer Balls (bulk) Electrogalvanized Steel

ORDER NO. TOWING BALL SHANK SHANK PRICE ORDER NO. PIN DIAMETER PRICE
CAPACITY DIA. DIA. LENGTH SDG 7510101
SDG 7510111 1/4” $3.52

ACM 7008 5000 lbs 2” 1” 2-1/8” $12.58 5/16” $3.72

232 TRAILER ACCESSORIES

Pivot Lock Hitch Pin

• Sleeve on: 5/8” diameter shackle sleeve fits 2” Coupler Latch Lock

receiver tubes, Class III/IV Stainless Steel, Adjustable Coupler
Latch Lock. Precision pin tumbler
• Sleeve off: 1/2” diameter shackle fits 1-1/4” mechanism resists lock picking.
Adjustable to 5/8”, 1”, and 2”
receiver tubes, Class II
ORDER NO. PRICE
• One piece design eliminates lost clips MAS 2847DAT $8.82

• Hade rotates and locks in both directions

• Blade can be locked with a small padlock

• Pivoting stainless steel blade ORDER NO. DESCRIPTION PRICE

MAS 1414DAT Chrome-Plated Steel $5.30

Gorilla Guard Keyed Alike Trailer Lock Set 2-5/16” Coupler Lock

Coupler Locks This set includes, a coupler lock for This coupler lock has a solid aluminum
• Easy to use, push-button lock unattended trailers, a coupler latch lock to die-cast body with powder paint, a front
• Heavy-duty cast construction secure coupler on to ball while attached loading keyway makes it easy to install and
• Fits most couplers to vehicle, and a universal receiver lock remove. Fit’s most 2-5/16” couplers.
• Die-cast steel barrel keys to secure the ball mount in receiver. They
are keyed alike for convenience. Includes:
379DAT, 2847DAT, 2866DAT (one each).

ORDER NO. PRICE
MAS 378XDAT $51.19

ORDER NO. DESCRIPTION PRICE ORDER NO. PRICE Universal Trailer Coupler Lock
FUL 63228 For 2” couplers $31.83 MAS 3794DAT $61.53
FUL 63227 For 2-5/16” couplers $32.52 • Fits 1-7/8”, 2”, and 2-5/16” couplers
manufactured by Reese®, Fulton, Valley,
Swivel Head™ 5/8” & 1/2” Universal Coupler Lock Atwood®, Shelby, Putnam, Hammerblow,
Dutton Lainson, and UFP.
Receiver Lock This product has a nickel-plated, zinc
die-cast body with a front access key-way for • Advanced locking mechanism resists
• Fits both 1/2” & 5/8” receivers ease of accessibility. The ratcheting shaft picking and prying.
• Push to Lock™ locking mechanism- push lock allows it to fit most
1-7/8” and 2” couplers.
body onto pin firmly and remove key
• 1/2” Pin is Rated for Class I/II and 5/8” Pin is Rated

for Class III/IV
• Weather Tough® seal and water tight cap protects

lock from moisture and dirt

ORDER NO. PRICE ORDER NO. PRICE ORDER NO. PRICE
MAS 2866DAT $15.71 MAS 377DAT $38.34 MAS 379DAT $29.31

Solid Rectangular Brass Trailer Coupler Lock-Two Piece Universal Coupler Lock

Coupler Lock Zinc brass-plated • Durable cast body
• Fits all 1-7/8”, 2” and 2-5/16” couplers
2” (56mm) solid brass coupler lock with anti-
sawing pin for maximum protection. Case-
hardened steel shackle resists cutting and
sawing. Solid brass case resists corrosion.
Precision pin tumbler mechanism for superior pick
resistance.

ORDER NO. PRICE ORDER NO. PRICE ORDER NO. PRICE
MAS 605DAT $10.43 SDG 7510301 $11.05 FUL 63226 $22.58

Receiver Locks TRAILER ACCESSORIES 233

1480DAT Coupler Latch Locks
300 series stainless steel shackle and
barbell ends offer the ultimate in corrosion 1471DAT fits surge brake and UFP brand coupler latches. 1475DAT fits
resistance. With its rotating, removable most standard coupler latches.
stainless steel shackle sleeve, it fits 5/8”
diameter receiver holes. ORDER NO. SHACKLE PRICE
MAS 1471DAT 9/32” x 3-1/2” Long $16.40
2-1/2” long shackle MAS 1475DAT 9/32” x 7/8” Long $16.40

ORDER NO. PRICE High Security Armorlock

MAS 1480DAT $22.70 Defy theives. Master Lock’s high-powered answer to thieves equipped
with bolt cutters and hacksaws. For guarding trailers on or off vehicles…
5/8 in. (16mm) Stainless Steel Barbell™ or combine Armorlock with a sturdy Master Crime fighter cable, chain or
Extended Length Receiver Lock hasp to get extra protection when locking up boats, bikes, sheds, etc.
Heavy shackle armor is so thick it won’t fit the jaws of most bolt cutters.
• Extended length shaft fits Toyota Tundra, Ford F-150/F-250/F-350, Roller-bearing case-hardened shackle guard frustrates sawing attempts
GMC/Chevy 2500/3500 and Dodge trucks with heavy duty tow – blade slips without cutting. Fits openings 1/2” dia. or large; roller is
packages removable to accommodate trailer hitch openings to 1/4” dia. (hitch
blocks hacksaw and bolt-cutter access). 1-1/2” wide laminated case. 4
• Usable length of receiver pin is 3-1/2in (89mm) pin tumbler lock. Exclusive dual steel levers lock
• Stainless Steel Barbell™ lock, fits 5/8in (16mm) receiver openings both legs of case-hardened shackle. Clearances:
• Push to Lock™ locking mechanism - push lock body onto pin firmly vertical 15/16”, horizontal 7/16” 2 brass keys.
Packed 6 in a carton.
and remove key
• Class III/IV; 10,000lb. Load rating
• Swivel Head™ design for easy access
• Weather Tough® seal protects lock mechanism

ORDER NO. PRICE ORDER NO. DESCRIPTION PRICE
MAS 1469DAT $24.50 MAS 37D Keyed Differently $15.24
MAS 37KA
Keyed Alike $16.60

Receiver Lock Replacement Handles 6319

The Receiver lock has a plated 5/8” 6307
steel pin for 2” x 2” receivers and a
heavy-duty cast lock body. Includes
protective cover.

ORDER NO. DESCRIPTION PRICE 6318 6322
FUL 63223 Receiver Lock Only $13.86

Ratchet Repair Kits DL6307 Standard 7” steel handle. For DL500-1302 and WG Series
including “A” models. Interchangeable with 6318.
For D-L hand winches. DL6318 Standard 9-1/2” steel handle. For DL1400 and 1402
including “A” models. Interchangeable with 6307.
DL6319 Standard 9-1/2” steel handle. For DL1602 and 1802
including “A” models.
DL6322 Quick attach 9-1/2” handle Easy to remove and attach.
For DL1620DD and 1700-3500B including “A” models.

ORDER NO. DESCRIPTION PRICE
DUT 6290
DUT 6291 Fits DL500, 600, 800, 900, 1000, 1100,1300 $8.05 ORDER NO. PRICE
DUT 6292 DUT 6307 $14.38
DUT 6293 Fits DL1200, 1400, 1302, 1402 $12.07 DUT 6318 $16.09
DUT 6294A DUT 6319 $18.32
Fits DL1602, 1602DD $12.07 DUT 6322 $19.44

Fits DL1802, 1700, 1800, 2000, 2500, 3000 $12.71

Fits DL1800A, 2000A, 2500A, 3200A. $12.71

234 TRAILER ACCESSORIES

Hand Winches
Zinc-Plated with TUFFPLATE®

DL600A DL900A

Standard Equipment: 7” milled-edge steel handle; one-way ratchet Standard Equipment: 7” milled-edge steel handle with corrugated
with off position. grip; one-way ratchet with off position.
Specifications: 600 lbs. rated capacity; 3.2:1 gear ratio; 5/8” drum Specifications: 900 lbs. rated capacity; 3.2:1 gear ratio, 5/8” drum
hub diameter. Drum Capacity Maximum Cable Size 5/32” x 61’. hub diameter. Drum Capacity Maximum Cable Size 3/16” x 40’.
Cable not included. Cable not included.

ORDER NO. PRICE ORDER NO. PRICE
DUT 600A $47.48 DUT 900A $50.92

DL1100A DL1300A

Standard Equipment: 7” milled-edge steel handle with corrugated grip; Standard Equipment: 7” milled-edge steel handle with corrugated grip;
one-way ratchet with off position. one-way ratchet with off position.
Specifications: 1100 lbs. rated capacity; 3.7:1 gear ratio; 7/8” drum hub Specifications: 1300 lbs. rated capacity; 4.4:1 gear ratio; 7/8” drum hub
diameter. Drum Capacity Maximum Cable Size 3/16” x 79’. Cable not diameter. Drum Capacity Maximum Cable Size 7/32” x 56’. Cable not
included. included.

ORDER NO. PRICE ORDER NO. PRICE
DUT 1100A $62.03 DUT 1300A $65.96

DL1402A DL1602A

Standard Equipment: 9-1/2” milled-edge steel handle with corrugated Standard Equipment: 9-1/2” milled-edge steel handle with corrugated
grip; reversible ratchet. Specifications: 1400 lbs. rated capacity; 4.4:1 grip; reversible ratchet.
gear ratio; 7/8” drum hub diameter. Drum Capacity Maximum Cable Specifications: 1600 lbs. rated capacity; 5.4:1 gear ratio, 1-1/8” drum
Size 1/4” x 40’. Cable not included. hub diameter. Drum Capacity Maximum Cable Size 1/4” x 58’. Cable
not included.

ORDER NO. PRICE ORDER NO. PRICE
DUT 1402A $77.10 DUT 1602A $93.16

D-L® ratchet winches are not recommended for lifting applications. For lifting, use a self locking winch. D-L® winches are not to be used as hoists for
lifting, supporting or transporting people or for loads over areas where people could be present.

TRAILER ACCESSORIES 235

DL1802A Hand Winches
Zinc-Plated with TUFFPLATE®
Standard Equipment: 9-1/2” milled-
edge steel handle with corrugated grip; DL1800A
reversible ratchet.
Specifications: 1800 lbs. rated capacity; Heavy Duty 1800 lbs. capacity Two Speed Operation With
5.4:1 gear ratio; 1-1/8” drum hub Quick-Attach Handle, 10.3 :1/5.4:1 gear ratio, 1-1/8” drum
diameter. Drum Capacity Maximum hub diameter. Drum Capacity Maximum Cable size 9/32” x
Cable Size 9/32” x 58’. 58’. Cable not included.
Cable not included.

ORDER NO. PRICE ORDER NO. PRICE

DUT 1802A $112.79 DUT 1800A $149.77

DL2500A DL2000A

Standard Equipment: Quick attach handle with corrugated grip; Standard Equipment: Quick attach handle with
reversible ratchet. corrugated grip; reversible ratchet.
Specifications: 2500 lbs. rated capacity; Specifications: 2000 lbs. rated capacity; 12.4:1
17.3:1 and 5.4:1 gear ratios; 1-1/8” drum hub and 5.4:1 gear ratios: 1-1/8” drum hub diameter;
diameter; two-speed double reduction gear two-speed double reduction gear system. Drum
system. Drum Capacity Maximum Capacity Maximum Cable Size 9/32” x 58’. Cable
Cable Size 5/16” x 47’. Can be ordered not included.
with hand brake. When ordering add suffix B.
Cable not included.

ORDER NO. PRICE ORDER NO. PRICE
DUT 2500A $191.93 DUT 2000A $180.81
DUT 2500AB $209.55
DL400 Ratchet Winch
DL® Ratchet winches are not recommended for lifting applications. For
lifting, use a self-locking winch. DL® winches are not to be used as Standard equipment: ratchet lever drive, standard
hoists for lifting, supporting, or transporting people finish is zinc TUFFPLATE® plated.
or for loads over areas where people could be present.
Specifications: 1:1 direct drive, rated capacity 400 lbs.
Maximum mechanical advantage 18.

ORDER NO. PRICE

DUT 400 $49.70

DLB Series Brake Winch DLX Winches

D-L Brake Winches are suitable for man lifting and lowering applications • Streamlined base design
such as raising boats on davits or raising and lowering sailboat keels. • Gear covers on both sides of base provide a more
• Laminated high carbon steel gears are heat-treated for longer life.
• Handle is integral part of braking mechanism. finished look
• MADE IN THE U.S.A. • Base in charcoal gray textured powder coating,
• Ratcheting handle for limited cranking space is available.
• Cable clamp standard. Cable not included. over TUFFPLATE® plating
• Zinc-plated TUFFPLATE finish • Deluxe handle grip is softer and more comfortable
• All models are one speed, and utilize
Specifications:
• Capacity: 1200 lbs. the patented reversible ratchet pawl
• Drum Hub Diameter: 2-1/2” • 9-1/2” winch handle
• Gear Ratio: 5.4:1 • Winch strap included
• Max. Cable Size: 7/32” x 69’ • 5 year limited warranty
• Strap Size: 35’ • Made in USA

(Cable and Strap not included.) ORDER NO. RATED DRUM GEAR PRICE
DUT DLX1500 1500 lb 7/8” 4.4:1 $128.57
ORDER NO. PRICE DUT DLX2300 2300 lb 1-1/8” 7.2:1 $240.67
DUT DLB1200A $194.40

236 TRAILER ACCESSORIES

Single Speed Winches Winch Handles

These winches feature efficient gear ratios, full-length drum bearings, oil impregnated shaft bushings and
patented “Comfort Grip” handle for ease of cranking. All gears are high carbon steel for superb strength a
and long term durability. Stamped carbon steel frames provide rigidity for gear alignment and longer cycle
life. Zinc finishes provide excellent corrosion resistance in all environments. All models are designed for use
with rope or strap.

ORDER NO. CAPACITY RATCHET DRUM STORAGE PRICE
TYPE
FUL T6000101 600 lbs. ROPE STRAP $47.41
FUL T9000101 900 lbs. One Way $48.15
FUL T11000101 1100 lbs. One Way 36’ x 1/4” 15’ x 2” $55.28
FUL T13000101 1300 lbs. One Way 36’ x 1/4” 15’ x 2” $57.17
FUL T15000101 1500 lbs. Two Way $57.52
FUL T18010101 1800 lbs. Two Way 30’ x 5/16” 20’ x 2” $114.84
Two Way
30’ x 5/16” 20’ x 2”

20’ x 5/16” 20’ x 2”

20’ x 7/16” 20’ x 2”

T6000101 T15000101 T18010101 ORDER NO. FOR WINCHES PRICE
FUL 586801 $15.97
FUL 630201 T600 $18.23

FUL 681701 T1300, T1500 $18.82

T1801, T2005,
T2605, T3205

T20050101 T26050101

Two Speed Winches F2 2000 Lb Capacity Trailer Winch

Make light work of heavy loads with Fulton two-speed winches. One fast speed for quick Soft grip ergonomic handle adjusts from 6”-9,”
pull in, a second low speed for increased mechanical advantage. Shift lock design allows balances torque, speed, and clearance. Switches from
changing gears without moving the crank handle from shaft to shaft. Just lift the shift lock left- to right-handed drive configuration with ease.
and slide the shaft in the desired gear position. Shift lock holds the shaft in gear. Neutral, Installs quickly by allowing user to drop in carriage bolts
free-wheel position, allows quick line pay out without spinning the handle. Ratchet pawl from outside the unit and apply lock ring. Bolts can be
also has a convenient neutral position. Strap/Cable must be ordered separately. adjusted to fit winch stand, and nuts can be tightened
• Stamped carbon steel frames from underneath. Fits industry standard mounting
• Zinc-coated finishes pattern. User-friendly pull and turn knob engages pawl
• Full length drum bearings easily and eliminates exposed spring.
• Completely enclosed design
ORDER NO. CAPACITY RATCHET TYPE DRUM STORAGE PRICE
provides sleek and stylish look
STRAP CABLE $154.01 • Dual gear drum operates smoothly
$185.60 • Handle switches from left-to-right
FUL T20050101 2000 lbs. Two Way w/ Neutral 20’ x 2” N/A $242.38
FUL T26050101 2600 lbs. Two Way w/ Neutral handed drive configuration
FUL T32050101 3200 lbs. Two Way w/ Neutral 20’ x 2” N/A • Includes all mounting hardware

N/A 100’ x 7/32” ORDER NO. PRICE

FUL FW20000101 $190.35

TRAILER ACCESSORIES 237

2-Year Factory Warranty

Model 912

Designed for 4,000 lbs. single line pull or 7,500 lbs. double line, this dependable model will handle
fully loaded boats up to 11,500 lbs. – usually boats ranging from 23’ to 30’ long. Its many quality
features include patented Tri-Matic Control, smoother pulling action, power-in and free-wheeling out,
an exclusive level wind system that won’t snarl and much more. Supplied complete with 12 volt wiring
harness for easy hook-up to car battery, 60 amp, circuit breaker, hand crank, pulley block and 40’
of 7/32” cable with safety hook. Attractively styled housing is a striking grey Super Tuf ABS plastic
casing that’s weather resistant.

ORDER NO. PRICE

PWR 77912 $606.44

2-Year Factory Warranty POWER-IN * POWER-OUT

Model 315 2-Year Factory Warranty

The Model 315 has a single line pull Model 915
of 1,650 lbs. which is plenty to haul
fully loaded boats weighing up to Powerwinch now offers you the control you need to launch your boat into
4,000 lbs.-usually boats ranging from a still current or from a steep incline with its Power-Out feature on the
14’ to 17’ long. Super Tuf ABS plastic Model 915. With the flick of a switch on the hand-held remote
casing that’s weather resistant, the control, the 915 smoothly powers-
315 features patented Tri-Matic Roll- in or powers-out boats up to 9,500
n-Gage Control, ultra smooth pulling lbs. The 915 comes complete with
action, power-in and free-wheeling out, positive locking when not winding manual hand crank, pulley block,
plus a level wind system that prevents snarls. Supplied complete with 12 40’ of 7/32” cable with safety hook,
volt wiring kit for easy hook-up to car battery, and 20’ of 7/32” cable with a wiring harness and is backed by the
safety hook. Powerwinch 2-Year Factory Warranty.

ORDER NO. PRICE ORDER NO. PRICE
PWR 77915 $946.92
PWR 77315 $288.94

2-Year Factory Warranty

Model 712-A

Designed for a 2,400 lbs. single line pull or 4,300 lbs. double line pull, this quality Powerwinch
model is ideal for hauling fully loaded boats weighing up to 7,500 lbs.-usually boats ranging from
17’ to 23’ long. Exclusive TriMatic Roll-n-Gage Control, ultra smooth pulling action,
power-in and free-wheeling out, positive locking when not winding, a no-snarl level wind system
and much more. Super Tuf ABS plastic casing that’s weather-proof. Supplied with a 12-volt
wiring harness for easy hook-up to car battery, 60 amp, circuit breaker, hand crank, 40’ of 7/32”
cable fitted with a safety hook and pulley.

ORDER NO. PRICE
PWR 77712 $549.44

Choosing the Right Powerwinch 20’ Cable with Hook ORDER NO. PRICE
PWR 71885 $47.81
LBS. AND FT. PWR71885 – 7/32” Diameter PWR 71872 $48.64
PWR 71887 $54.76
Model Single Line Pull Double Line Pull Max. Boat Gross Wt.* Approx. Hull Length 25’ Cable with Hook PWR 71888 $58.56
PWR 71854 $65.87
315 1,650 N/A 4,000 14’ to 17’ PWR71872 – 7/32” Diameter

712A 2,400 4,300 7,500 17’ to 23’ 30’ Cable with Hook

912 4,000 7,500 11,500 23’ to 30’ PWR71887 – 7/32” Diameter

915 3,200 5,900 9,500 22’ to 29’ 40’ Cable with Hook

PWR71888 – 7/32” Diameter

50’ Cable with Hook

PWR71854 – 7/32” Diameter

* Maximum boat weight may depend on the condition of the trailer. Not to be used as a hoist.

238 TRAILER ACCESSORIES

Electric Trailer Winches Wireless Remote Control Trailer Winches

• 3-step corrosion protection The RC 30 and RC 23 are remote operated. Say goodbye to sore muscles from
• White Housing and paint
• 316 SS Hardware & Cable cranking and pulling your boat onto the trailer with Powerwinch’s RC 30 and RC 23,
• Added UV inhibitors
• Sealed wiring connections stand back and simply push the REMOTE and watch the boat glide on to the trailer.
• Marine-grade Tinned Wire
• Key Fob Wireless Remote Get the latest in technology and strength with the Powerwinch RC 30 and RC 23

Control Included state of the art trailer winches. The RC 30 and RC 23 have a built-in light so you can
• Line speed—6’ per minute
use your boat at night!
under load
• Remote operated

• Added convenience of a light enclosed in the trailer

winch casing to assist you

Lite Cruiser Day Runner • Emergency crank conveniently stores in casing
Capacity—3,500 lbs. Capacity—2,500 lbs.
Max Boat Weight—10,000 lbs. Max Boat Weight—7,000 lbs. • Remote power in/freewheel out operation
Boat Length—Up to 26 ft. Boat Length—Up to 22 ft.
• Redesigned stronger housing

• Pulley block provides for double line applications

• 60 amp standard wiring harness included

ORDER NO. PRICE ORDER NO. PRICE • Cable size 7/32” x 40” P55750
TOP T10130 $103.33 TOP T10125 $279.95 • 12 volt

• Two year limited warranty *Not to be used as a hoist.

Vehicle Wiring Kit ORDER NO. MODEL SINGLE DOUBLE MAX. BOAT APPROX. PRICE
LINE LINE WEIGHT* HULL
Everything you need to wire your vehicle for PWR P55750 RC23 PULL $606.92
high-current (60 amp) 12v power. PWR P55950 RC30 CAPACITY LENGTH $664.48
Kit includes: 2400 Ibs
• TRAC’s 12v high-current quick-connect system: 4300 Ibs 7500 Ibs 17’-23’
• 12v connector for rear of vehicle 4000 Ibs 7500 Ibs 11,500 Ibs 23’-30’
• Adaptor for optional receptacle installation in 1.5” round hole
• “U” bracket for optional receptacle installation on flat surface TW9000 StrongArm® Electric Trailer Winch
• 12v connector for trailer winch or any other 12v device
• 25’ of heavy 8-gauge “tinned” positive battery wire • Features heat-treated sintered iron gears and precision needle bearings
• 5’ of heavy 8-gauge “tinned” negative battery wire • Brushed stainless steel front plate and high impact polyethylene case
• Dacromet coated self-tapping grounding bolt • Power-in, Power-Out freewheeling
• 35 amp auto-resetting circuit breaker • Clutch control engages the gears or releases the
• 10 tie-wraps to secure load or can be locked in the freewheeling position
• 3,000 lbs. dead weight capacity
battery wires to vehicle • For boats up to 9,000 lbs.
• Installation instructions • Complete with 2” x 20’ (6251) heavy-duty strap
and hook, wiring harness and emergency
ORDER NO. PRICE crank handle
• 12 Volt and 70 Amps
TOP T10135 $97.95
ORDER NO. PRICE

DUT TW9000 $652.69 Not for movement of human beings.

Portable Winch Wireless Electric Trailer Winches

2,000 lb. 12 volt DC electric winch • Universal spool accepts wire rope, strap or synthetic rope.
• Powerful rack and pinion gear design • Winch includes 20’ cable (wire rope).
• Can be temporarily mounted to a ball mount or • Quick change from locked to free-spool, using the new cam-action free spool lever. It is easier and

attached to a flat surface with mounting plate faster than ever. Just loosen the nut a few turns and move the lever to the other side. The hook
• Power Battery cables, remote control, back-up is ready to easily pull out and hook to boat. After a quick flip of the lever back to the load position,
the winch is ready to power-in with the push of a button on the wireless controller.
hand crank and hook with safety latch included • The winch can be installed with standard trailer winch mounting holes matching both 2-bolt and
• Convenient carrying handle built-into winch 3-bolt placement for more options/ flexible mounting. (high-strength bolts included).
• Larger spool opening allows this winch to be installed on any trailer
housing winchstand from horizontal to vertical.
• Max. boat weight: 5000 lbs • Fits a wide variety of trailers with angled winch stands – no other
• Max boat size: 18 ft. electric trailer winch has this feature.
• Cable Length: 30 ft. • Six high brightness LEDs are positioned to flood the landing path
• Net weight: 27 lbs with 180 degrees of arcing illumination.
• Saltwater model features hot dip galvanized
frame and stainless hardware.
• Wireless remote control included.
• Long hand crank for easier manual winching.
• 2 year warranty.

ORDER NO. PRICE ORDER NO. CAPACITY WATER TYPE PRICE
MAS 2953AT $110.40 TOP T10180 2500 lbs. Freshwater $325.95
TOP T10182SW 3500 lbs. Saltwater $395.95

TRAILER ACCESSORIES 239

30 Amp Breaker 60 Amp Wiring Harness Replacement Thrust

For use with Powerwinch Part No. P7830200AJ Bearing, Washers and Spring
315 winch. For use with Powerwinch 712, 912
and 915 winches. For the following Powerwinch Models:
ORDER NO. PRICE 712A, 912, T2400, T4000, AP3500,
PWR 78372 $13.60 ST712, VS190 and BH12.

60 Amp Breaker ORDER NO. PRICE
PWR 78302 $74.39
For use with Powerwinch 712,
912 and 915 winches. Trimatic Control Knob

For use with Powerwinch 712 and 912 winches.

ORDER NO. PRICE ORDER NO. PRICE ORDER NO. PRICE
PWR 78373 $19.39 PWR P5591000AJ $12.25 PWR P7160901AJ $13.73

Emergency Manual Hand Crank Pulley Block with Hook 30 Amp Wiring Harness

Part No. P7704100AJ Part No. P7904300AJ Part No. P7833900AJ
For use with Powerwinch winches except For use with all Powerwinch winches. For use with Powerwinch models
models 1112, 1212. 215 & 315.

ORDER NO. PRICE ORDER NO. PRICE ORDER NO. PRICE
PWR P5594700AJ $27.30 PWR 79043 $48.34 PWR 78339 $57.82

Winch Parts & Accessories Spring-Loaded Switch Plastic Plug and Plastic Winch Plug
Socket Kit
Plastic Winch Socket Part No. P7811700AJ Part No. P7810500AJ
• For use with Powerwinch Part No. P7702200AJ • For use with Powerwinch
Part No. P7810300AJ • For use with
• For use with all 712, 912 and 712, 912 and 915
915 winches. Powerwinch winches.
Powerwinch 712, 912
winches. and 915 ORDER NO. PRICE
winches. PWR 78105 $14.30
ORDER NO. PRICE ORDER NO. PRICE
PWR 78103 $14.31 PWR 78117 $49.57 ORDER NO. PRICE

PWR 77022 $25.75

240 TRAILER ACCESSORIES

Kwik-Lok Gunwale Tie-Down Trailer Tie Down G2 Retractable Transom Tie-Down
(Standard)
Bracket • Self-retracting 2” polyester web strap, 14” - 43” length
• Rugged adjustable buckle • Sleek, contoured styling
• J-Hooks turned at right angle with Add tie down points to your • Permanently mounts to trailer
trailer. Round-edge hot-dip • Stronger – 5,000 lb. rated capacity/pair
Keeper galvanized steel bracket • Simple, one-hand operation
• 2” wide webbing measures : 2” x 4” with a • Adapts to virtually any mounting angle
• Rated strength – 400 lbs. – 9/16” Mounting hole and a • Stainless steel power spring
7/8” strap hook hole. • Sold in pairs
loop load
• Rating is 1/3rd actual breaking ORDER NO. PRICE

strength when new IMM F08893 $95.98
• Do not exceed rated
ORDER NO. PRICE
strength in actual use CES 26214GA $7.03

ORDER NO. LGTH PRICE

IMM F13113 10’ $16.25

IMM F13114 13’ $18.63

IMM F13115 16’ $19.76

IMM F13116 20’ $21.94

Heavy-Duty Pro Series Gunwale Gunwale Tie-Downs Heavy Ratchet
Tie-Down
Ratchet Transom Tie-Downs Tie-Downs These 1” ratchet tie-downs
feature durable nylon • Heavy duty double J-hooks
When you need maximum torque Features SUR-Grip Kwik- webbing with double designed for quick and easy
and strength, look to these industrial Lok buckle for maximum J-hooks and keeper. adjustment
strength ratchet transom tie-downs. comfort. Built-in closure Rated capacity: 1000 lbs.
This 2” Tie-Down stores excess web while • Strong 2” nylon webbing
feature 5,500 lb./pr. trailering. Vinyl-coated ORDER NO. LGTH PRICE • Length adjustment range: 4’
polyester webbing, a S-hooks with keeper and IMM F05845 12’ $20.09
protective web pad, and 5,500 lb polyester webbing to 20’ Rated strength: 2,200
vinyl-coated adds to the list of features lbs lbs. – loop load
transom and trailer that makes the Pro Series Rating is 1/3rd actual
hooks. Sold in pairs. truly your best choice. breaking strength when new
Do not exceed rated
ORDER NO. DESCRIPTION PRICE ORDER NO. LGTH PRICE strength in actual use
IMM F14207 2” x 4’ $38.27 IMM F17634 10’ $25.04
IMM F14208 2” x 6’ $38.63 IMM F17635 13’ $26.80 ORDER NO. PRICE
IMM F17636 16’ $28.65 IMM F14069 $41.34
IMM F17637 20’ $30.49

Pro Series Kwik-Lok Stainless Steel 2” Kwik-Lok® PWC Tri-Down™
Transom Tie-Downs Transom Tie-Downs
• Three heavy vinyl hooks to protect your big
Features our SUR-Grip Kwik-Lok buckle for • Non-corrosive stainless steel investment
maximum comfort. For added safety and • Kwik-Lok® Fastener closes to
security, they also come standard with Hi-Vis • Easy to use cam buckle
protective PVC pads and our Night Eyes locked position • Long enough to fit any P.W.C.
reflective closure patch for increased visibility • Rated strength 2000 lbs. • Convenient web keeper to keep excess web
in low light conditions. Zinc-coated steel trailer
hooks and vinyl coated top straight pull from flapping in the breeze
hook. Sold in pairs. • Protective web pads • 1,200 lb. capacity
• Sold in pairs

ORDER NO. LGTH PRICE ORDER NO. LENGTH PRICE ORDER NO. LENGTH PRICE
IMM F17631 2’ $32.32 IMM F12066 4’ $49.70 IMM F10972BK 6’ $16.70
IMM F17632 4’ $35.90 IMM F12067 6’ $49.35
IMM F17633 6’ $38.52

Winch Straps TRAILER ACCESSORIES 241

Straps are 2” wide and have an overall tensile Universal Premium Replacement
strength of 5000 lbs. Each strap comes with a Stainless Steel Cable
heavy duty forged latch hook. 1 per package.
• For all electric and hand winches
ORDER NO. SIZE PRICE • Stainless steel will provide more seasons
$13.89
TIE 50465 15’ $16.58 of carefree winching than with the use of
$17.95 galvanized cable

TIE 50470 20’

TIE 50475 25’

Winch Strap with Loop End ORDER NO. DESCRIPTION PRICE
PWR P1088100AJ 7/32” x 25’ $94.28
2” x 20’ Strap. Steel forged snap hook with PWR P1096600AJ 7/32” x 50’ $204.74
stainless steel spring, with
replacement bolt and nut.
Rated Strength: 4,000 lbs. – straight pull.

ORDER NO. PRICE
IMM 5848 $15.10

Cable Clamp

For all D-L ratchet and brake winches.

ORDER NO. PRICE

DUT 6285 $4.23 Winch Strap and Hook

Nylon web winch strap with hook,
2” x 20’, 2,600 lb. maximum working load.

Winch Strap and Hook ORDER NO. DESCRIPTION PRICE
FUL WS200700 2” x 20’ Winch Strap $18.10
Durable polyester strap makes winching your boat even easier. 2” width
fits winches up to DL2500, and winds on smooth and even, Safer and
more attractive than cable or rope. Breaking strength 4000 lbs. Forged
steel hook with tensile strength of 7500 lbs. Individually packaged on
display card, including two mounting bolts – one to fit smaller winches and
one for larger sizes.

ORDER NO. DESCRIPTION PRICE Winch Accessories
DUT 6248 15’ winch strap with hook. $22.10
DUT 6249 20’ winch strap with hook. $24.25 Personal Watercraft Winch Strap with
DUT 6250 25’ winch strap with hook. $26.47 Hook and Loop
Includes loop Nylon web winch strap with hook, 2”
PWC Standard Duty Winch Strap and Hook x 12’, 1,800 lb. maximum working load

2” wide polyester strap for use with hand winches up through 1700 lbs. Heavy Duty Winch Strap and Hook
capacity. Breaking strength 2600 lbs. Forged steel hook with tensile 2” x 20’, 10,000 lb. minimum breaking strength,
strength of 3750 lbs. 12’ strap w/hook, strap 4,000 lb. maximum working load – Fulton® High
includes 1” x 18” loop. Designed for Performance
PWC trailer application.

ORDER NO. PRICE
DUT 6147 $22.45

Winch Cables Winch Cable and Hook
3/16” x 25’ galvanized cable, 4,200 lb. breaking
Galvanized steel aircraft cable is made to strength – Fulton® High Performance
handle the heavy loads. Each cable is fitted with a heavy duty
galvanized latch hook, pull proof loop and a fastener end for
replacement use on power electric winches. Great for hand
crank winches also.

ORDER NO. SIZE STRENGTH PRICE ORDER NO. DESCRIPTION PRICE
FUL WSP120100 Personal Watercraft Winch Strap $17.49
TIE 59385 3/16” x 25’ 4200 lbs. $32.29 FUL WS20HD0600 Heavy Duty Winch Strap and Hook $26.30
FUL WC3250100 $25.71
TIE 59395 7/32” x 25’ 5600 lbs. $34.32 Winch Cable and Hook

TIE 59400 7/32” x 50’ 5600 lbs. $47.91

242 TRAILER ACCESSORIES

Guardian Motor Support Combo

Protect your transom, outboard and motor components with a Guardian.
Made of high strength aluminum shaft and aluminum cast or composite
pivoting heads plus included, over the roller and bolt on adapters for the
trailer installation.

Trailering Clips

I/O Motor Support

These trailering clips provide an inexpensive way to protect stern drive
units while trailering or storing. They relieve the stress on the tilt and trim
system by transferring the stern drive weight from the hydraulic cylinders
to the transom bracket. These clips will prevent damage from weight
surges during trailering. Fits all Mercruiser Alpha 1, Alpha 1 Generation
II, Bravo 1, Bravo II, Bravo III, and Blackhawk Stern Drives. Units may
be trimmed to for shorter rams.

ORDER NO. PRICE

THM TC1DP $32.08

ORDER NO. DESCRIPTION ADJUSTS TO PRICE
SPM 1780240 Deluxe with aluminum heads 32”-46” $80.39
SPM 1780242 Economy with composite heads 27”-40” $67.13

Angled Adjustable Reach Transom Support

Transom Saver Adjustable from 25” to 36”
• Constructed with high-strength aluminum
• Adjustment from 30” - 60” • Includes bolt-on
• Unique angle adjustment from 0 degrees to 36
and over-the-roller
degrees with 12 degree increments brackets
• Our innovative design will fit any trailer
• Heavy-duty rubber extrusions to ORDER NO. PRICE

prevent scratching on the lower unit JIF FXK $58.50
• Black powder coated steel

Large Motor Support Bracket

34” - 46” adjustable universal mount
• Anodized aluminum tubing
• Protect your transom, motor and

steering components from road shock
& vibration when trailering
• Built-in rubber shock absorbers
• 24” rubber strap with hooks
• Cast aluminum head and mounts
• Lightweight, durable and corrosion resistant

ORDER NO. PRICE ORDER NO. PRICE
ATT 460ADJ $145.25 JIF DNB $57.00

Lock’N-Stow

Does not “tie” the boat’s outboard to the trailer, which in some
cases can cause “trailer shock” when the boat and trailer get
out-of-sync. This is a small compact unit that totally locks the
outboard in the forward position without tying it to the trailer. And
its small size makes it easy to store in your boot when not in use.
Black powder coated finish.

ORDER NO. DESCRIPTION PRICE
ATT 10108 $137.21
Fits Mercury engines 75hp-200hp EFI, 135 OptiMax,
150 OptiMax, 175 OptiMax

LOCKS 243

Mariner Padlock Aluminum Resettable

• Patented “Z-Bar” for 2 in 1 function: Quickly converts key Combination Luggage Lock
retaining to non-key retaining and vice versa without tools
1-3/16” (30mm) wide solid aluminum lock
• Rekeyable within seconds body. Three-dial resettable combination.
• Pearl nickel plated brass body 3/16” (5mm) diameter bronze plated steel
• High precision pin tumbler cylinder with patented pinning window shackle. Clearances: vertical 1” (25mm),
• Can be keyed into many popular security keyways horizontal 9/16” (14mm). 1,000 possible
• Patented easy shackle change within seconds combinations.
• Stainless steel 5/16” shackle
• Clearances: vertical 1”, horizontal 1” ORDER NO. PRICE

MAS 630D $7.36

ORDER NO. PRICE Set Your Own Combination Lock
ABU 83MAR45 $32.00
• Corrosion resistant brass plated steel shackle
Combination Padlocks-180 Series Resettable • Windows make viewing combination quick and

• Solid brass body accurate
• Internal brass components • Black zinc alloy body compliments lockables
• 5/16” Stainless steel shackle • Combination can be easily changed
• 10,000 possible combinations • Ideal for luggage, briefcases, sportsbags,
• Restting tool included
backpacks, tool boxes, cabinets
• Lifetime guarantee

ORDER NO. SIZE PRICE
MAS 647D 1-1/4” $6.14

Resettable Combination Padlocks

Instantly resettable to open at any personally programmed 4-digit
combination. Features corrosion-resistant solid brass case and
5/16” thick nickel plated case hardened steel shackle. Independent
double locking shackle legs. Std. Ctn 6.

ORDER NO. ShACKLE CTN PRICE ORDER NO. DESCRIPTION PRICE
ABU 15812 1” 6 $32.00 MAS 175D
ABU 15813 6 $36.00 MAS 175DLh 1" Shackle $22.34
2-1/4”
With 2-1/4” Vertical Shackle $25.33

244 LOCKS

Economy Solid

Brass-55 Series Padlocks

• Hardened steel chrome plated shackles available
• Rust-free internal mechanism
• Heel and toe bolting for added strength
• Shackle locks on both sides for security

ORDER NO. DESCRIPTION KEY OPTION CTN PRICE 56411 56611 56811
ABU 56411 55/30 1-1/4” Wide Keyed Differently 6 $8.40
ABU 56413 55/30 1-1/4” Wide Keyed Alike (3-Pk) 4
ABU 56611 55/40 1-1/2” Wide Keyed Differently 6 $24.10
ABU 56613 55/40 1-1/2” Wide Keyed Alike (3-Pk) 4 $10.50
ABU 56811 Keyed Differently 6 $30.00
ABU 55896 55/50 2” Wide 12 $15.30
55/50 2” Wide Keyed Alike $16.25

Master Warded Type Padlocks

Laminated Padlock 1-3/16” wide corrosion-resistant solid brass case. Brass 4 pin tumbler
1-3/4” wide laminated steel case. Warded locking locking mechanism. Rugged locking lever. Special
mechanism. Patented crowned locking lever. limited-use keyway design for added security. Case-
Cadmium rust-proofing. Adjustable and removable 3” hardened steel shackle, diameter 3/16”.
shackle, cadmium-plated, diameter 9/32” Clearances: Clearances: vertical 5/8”, horizontal 9/16”. Two
vertical 5/8” to 2”, horizontal 13/16” Two nickel-plated nickel-plated brass keys. Packed 6 in a carton.
steel keys, 6 in a carton.
ORDER NO. DESCRIPTION PRICE
ORDER NO. DESCRIPTION PRICE
MAS 510D Keyed Differently $7.31 MAS 130D Keyed Differently $5.01

high Security Armorlock 1-9/16” wide corrosion-resistant solid brass
case. Brass 4 pin tumbler locking mechanism. Rugged locking
Defy theives. Master Lock’s high-powered answer to thieves equipped lever. Special limited-use keyway design for added security. Case-
with bolt cutters and hacksaws. For guarding trailers on or off vehicles… hardened steel shackle, diameter 1/4”. Clearances:
or combine Armorlock with a sturdy Master Crime fighter cable, chain or vertical 7/8”, horizontal 13/16”. Two nickel-plated
hasp to get extra protection when locking up boats, bikes, sheds, etc. brass keys. Packed 6 in a carton
Heavy shackle armor is so thick it won’t fit the jaws of most bolt cutters.
Roller-bearing case-hardened shackle guard frustrates sawing attempts ORDER NO. DESCRIPTION PRICE
– blade slips without cutting. Fits openings 1/2” dia. MAS 140D Keyed Differently $6.56
or large; roller is removable to accommodate trailer MAS 140KAD
hitch openings to 1/4” dia. (hitch blocks hacksaw Keyed Alike $7.39
and bolt-cutter access). 1-1/2” wide laminated case.
4 pin tumbler lock. Exclusive dual steel levers lock
both legs of case-hardened shackle. Clearances:
vertical 15/16”, horizontal 7/16” 2 brass keys.
Packed 6 in a carton.

ORDER NO. DESCRIPTION PRICE
MAS 37D Keyed Differently $15.24
MAS 37KA
Keyed Alike $16.60

Padlock 2” wide corrosion-resistant solid brass case. Brass
5 pin tumbler locking mechanism. Rugged locking
2-3/8” wide corrosion-resistant solid brass case. lever. Special limited-use keyway design for added
Brass 4 pin tumbler locking mechanism. Rugged security. Case-hardened steel shackle, diameter
locking lever. Special limited-use keyway design 9/32”. Clearances: vertical 1” horizontal 1”. Two
for added security. Case-hardened steel shackle, nickel-plated brass keys. Packed 6 in a carton.
diameter 11/32”. Clearances: vertical 1-1/8”,
horizontal 1-1/4”. Two nickel-plated brass keys. ORDER NO. DESCRIPTION PRICE
Packed 6 in a carton.
MAS 150D Keyed Differently $10.63
ORDER NO. DESCRIPTION PRICE

MAS 160D Keyed Differently $13.38

LOCKS 245

Stern Drive Lock Outboard MotorLocks

Theft protection for Mercruiser and Cobra Stern Drives. McGard Stern
Drive Locks are fully machined from high quality stainless steel and
through hardened. This Stern Drive Lock features a free-spinning collar
that will turn if attacked by gripping tools without loosening the lock.
To install, simply replace one of the nuts holding the stern drive with a
McGard lock. Then tighten the lock with the special key tool provided in
each set. The easy to use key tool comes in many different patterns for
maximum security.

ORDER NO. DESCRIPTION ThREAD SIZE PRICE ORDER NO. ENGINE SIZE MFG. ThREAD SIZE PRICE
MCG 74036 40 HP and larger
MCG 74018 Single Stern Drive 7/16” $31.06 40 HP and larger Mercury/Mariner 1/2” x 20 $38.93
MCG 74037 50 HP and larger
MCG 74019 Twin Stern Drive 7/16” $48.38 Honda
Yamaha
M12 x 1.25 $38.93

APPLICATION: Mercruiser Alpha & Bravo and all OMC
Cobra & King Cobra Stern Drives, Volvo SX, DP-S

Propeller Locks Cam Lock

Secure lockers, hatches, compartments and
drawers. 1-1/8” depth

ORDER NO. STERN DRIVE UNIT OUTBOARD MOTOR ThREAD PRICE

Mercury, Mariner: 70HP

MCG 74039 MerCruiser®: Alpha I, & larger (2 stroke). 3/4” x 16” $75.27
Bravo I (Incl. X & XR), Mercury 50 HP and larger
TRS OMC Cobra and (4 stroke) (ex. 225 HP 4

King Cobra stroke before 2005)
Johnson/Evinrude 150 HP

and larger (2 stroke)

Honda 75 HP and larger

Suzuki 40 HP and larger ORDER NO. DESCRIPTION PRICE
SIE CL49330 1-1/8” depth $13.97
MCG 74040 All Yamaha Yamaha 115 HP M18 x 1.5 $75.27 SIE CL49330KA $13.97
and larger SIE CL49310 1-1/8” keyed alike $13.69
5/8” depth
Johnson/Evinrude 150 HP

and larger (4 stroke)

246 LOCKS

Flush Security Lock Floating Safety Keychain

Die Cast Zinc Alloy - Chromium Plated The Orion Safety Keychain is great for all boaters,
A trim and sturdy lock designed to eliminate bulky padlock type PWC Owners, and fishermen.
protrusions. Constructed for marine environment, this lock is • Waterproof
ideal for lockers, compartment doors in consoles, dock boxes • Floats
and other applications requiring protection against theft or • High Visibility Orange
vandalism. The design of this unit also allows for easy • Non-corrosive chain
installation by drilling a 1-5/8” diameter hole. Door • Holds License or Registration
thickness, 1/2-3/4”, size 2-1/4” x 2”. • 24 per counter display

ORDER NO. PRICE Price shown is per display
PER 0921DP0CHR $61.00

Outboard Motor Lock ORDER NO. PRICE
ORN KEYC $107.99
One model fits the majority of motors secured to transom by means of
clamp-screws (except certain Chrysler outboards). Packed 6 in a case. Floating Container
Complete with weatherproof marine brass padlock.
• Waterproof
• Perfect for beach
• Break-away neck rope
• White with

HomePort® Logo

ORDER NO. DESCRIPTION PRICE ORDER NO. PRICE
MAS 430DSPT Keyed Differently $29.39 HPT KEYFOB $2.99

Adjustable Locking Cable Key Buoy

• Patented locking mechanism holds the cable tight at any position from The ultimate key fob for boaters! When keys fall in the water,
1’ to 6’ for ultimate flexibility Key Buoy self-inflating key ring opens up, releasing an air tube
which inflates automatically. Within 30 seconds, your keys rise to
• Convenient, rekeyable cylinder the surface, and the 14” inflated tube extends above the water,
• 6’ long and 3/8” Outside Diameter 100% steel braided cable allowing you to reach over and pick them up.
• Weather tough and rust resistant lock body and cable Strong enough for items weighing up to 4.2 ounces such as keys,
• Vinyl sleeve prevents scratching small tools, deck plate keys. Suitable for single use only, so keep
• Compact storage with velcro strap to hold excess cable a spare on hand!

ORDER NO. PRICE
MAS 8413XDPF $28.69

Cable with Loops ORDER NO. PRICE

3/8” diameter, 6’ long, braided steel DAV 530 $6.98
cable with loops. Steel wires for strength
and flexibility. Galvanized steel cable
and protective sleeves for superior rust
resistance. Vinyl coating to help prevent
scratching.

ORDER NO. PRICE
MAS 78DPF $10.18

ENGINE PARTS AND ACCESSORIES 247

Outboard Starters

3429 3431 3447

(New)FITS: YAMAHA (New)FITS: YAMAHA (New)FITS: HONDA
1998-UP V200; 1994-UP 225 HP 2000-Up LZ 150-175 HP 2002 – UP 115 & 130 HP
1990-UP 250 HP 2000-Up VZ 150-175 HP Replaces: Honda: 31200-ZW5-003; Mitsubishi
Replaces: Hitachi S114-559B 2000-Up Z 150-175 HP MOT 60381
9-tooth drive gear 2000-Up LZ 200-Z200 HP 13-tooth drive gear
Replaces: Hitachi S114-836A
ORDER NO. PRICE 13-tooth drive gear
ARC 3429 $569.95
ORDER NO. PRICE ORDER NO. PRICE
5370 ARC 3431 $464.95 ARC 3447 $345.95

(New) O.M.C. 55-75 HP 3 cyl. 5371 5372
9 tooth drive gear
(New) O.M.C. 50-60 HP 2 cyl. (New) O.M.C.85-140 HP Late Model V4.
9 tooth drive gear Small 10 tooth drive gear.

ORDER NO. PRICE ORDER NO. PRICE ORDER NO. PRICE
ARC 5370 $191.95 ARC 5371 $191.95 ARC 5372 $175.95

8 Toothdrive Gear 5373 5375 5376

(New) O.M.C. 150-235 HP V6 Replaces (New) Mercury, Mariner 50-90 HP (New) O.M.C. 18-40 HP Replaces OMC
O.M.C. No. 387094, 395207, 585062, Replaces Mercury No. 50-66015, 386591, 392133, 585061, 586278
586288 50-66015-2, 10 tooth drive gear

ORDER NO. PRICE ORDER NO. PRICE ORDER NO. PRICE
ARC 5373 $198.95 ARC 5375 $199.95 ARC 5376 $161.95

5386 5387 5392

(New) O.M.C. 120 - 140 HP V4, 1985 And Up. (New) Fits OMC V6, V8 looper. 10 tooth (New)FITS: MERCURY/MARINER
10 Tooth Drive Gear O.M.C. drive gear. Replaces OMC 100-125 HP Inline 4-cyl;
No. 393570, No’s 391511, 80 HP Jet
585060, 586285 396235, 397023, 8-tooth drive gear
584799, 586289

ORDER NO. PRICE ORDER NO. PRICE ORDER NO. PRICE
ARC 5386 $197.95 ARC 5387 $225.95
ARC 5392 $207.95
5393
5394
(New) Fits Chrysler/Force 70-150 HP. 9 Tooth
Drive Gear Force No’s. 50-819085, 480955, (New)
490955, 61-6955 Fits Force 40-50 HP – 1996-99
Replaces: Force 50-820193T1
ORDER NO. PRICE 13-tooth drive gear.
ARC 5393 $192.95
ORDER NO. PRICE
ARC 5394 $188.95

248 ENGINE PARTS AND ACCESSORIES

Outboard Starters

3426 3428

(New) Replaces: Hitachi S114-323, OEM (New) Replaces: Hitachi S114-660,Yamaha 6K7-
Yamaha 6E5-81800-10, 6E5-81800- 81800-10, 6N7-81800-00, 6N7-81800-01, 6N7-81800-10,
11,6E5-81800-12, Yamaha 115-200 HP, 2 Stroke. Yamaha 115-225 HP, 2 Stroke
1984-1996

ORDER NO. PRICE ORDER NO. PRICE
ARC 3426 $441.95 ARC 3428 $525.95

3430 3432

(New) OEM Fits Yamaha (New) OEM
1999-Up—80 HP, 4 Stroke Fits Yamaha
1999-Up—100 HP, 4 Stroke 2000-Up—F115, 4 Stroke
Mercury/Mariner—90 HP, 4 Stroke 2000-Up—LF115, 4 Stroke
Replaces: Hitachi S1 14-828B Replaces: Hitachi S114-838A
13-tooth drive gear. 13-tooth drive gear.

ORDER NO. PRICE ORDER NO. PRICE
ARC 3432 $428.95
ARC 3430 $454.95
5377
3433
(New)Mercury, Mariner 90-175 HP, Inline and
(New) 150HP V6, Replaces
Fits: Yamaha 2004-Up 150 HP, 4 Stroke 50-57465A1 & 50-72467
2005-Up 250 HP, 4 Stroke
2006-Up 225 HP, 4 Stroke
Replaces: Hitachi
S114-867
13-tooth drive gear

ORDER NO. PRICE ORDER NO. PRICE
ARC 3433 $535.95 ARC 5377 $207.95

5379 5380

(New) Mercury, Mariner 40-50 HP Replaces (New)
Mercury No. 50-73521. Mercury, Mariner
10 tooth drive gear 135-200 HP Replaces Mercury
No. 50-79472. 8 tooth drive gear.

ORDER NO. PRICE ORDER NO. PRICE
ARC 5379 $194.95 ARC 5380 $207.95

5381 5400

(New) Fits: Mercury 1999–Up 2.5 DFI, (New) Fits: Mercury 2001-UP
1996–1999 200HP V6 DFI, 1998–Up 225 HP 135-250 HP 200-250 Sport Jet
V6 DFI, 1999–Up 3.0L V6 9-tooth 2005-UP Verado 4 Stroke
drive gear. 200-275 HP
14-tooth drive gear
ORDER NO. PRICE
ARC 5381 $214.95 ORDER NO. PRICE
ARC 5400 $289.95