2016 Catalog PDF

Stasis™Small Pull-Out Galley (Kitchen) Faucet WATER SYSTEMS 649

• Chrome Recessed Shower
• Ceramic disc valve
• 2 function spray/aerated stream with • 6’ white, retractable, heavy duty, rubber hose
• Heavy duty plastic enclosure cup
lock-on spray mode • Small marine sprayer (with hook)
• Stainless steel hose with retraction • Wall or deck mounting option
• Single hole mount • Stainless steel mounting screws
• Connections: 1/2” NPS-M • Depressing trigger allows for intermittent water flow
• Lifting trigger locks it on for continuous water flow
ORDER NO. PRICE • Single hole mount
AMB 1330112CP $190.00 • Connection: 1/2” NPS

Trinidad™Folding Tap

• Chrome ORDER NO. DESCRIPTION PRICE
• Compression valve AMB 1370000WH White $79.75
• Spout rotates 180º front/back AMB 1370040CW
• Single temperature (cold or hot) Stainless Steel $124.00

water only
• Single hole mount
• Solid brass body and spout
• Connection: 1/2” NPS-M

ORDER NO. PRICE
AMB 1330208CP $56.00

Trinidad™Head/Shower Combo Faucet Trinidad™
Classic Sprayer
Single Hole Head (Lav) Faucet
• Chrome & white
• Ceramic disc valves • Chrome
• Classic sprayer with locking teeth* • Ceramic disc valves
• Solid brass body with locking teeth* • Single hole mount
• 6’ retractable, heavy duty, white, rubber hose • Solid brass body and spout with
• 2 function spray/aerated stream with water conserving
stainless steel supply hoses
“stand-by” button • Connections: 1/2” NPS-M
• Single hole mount
• Connections: 1/2” NPS-M ORDER NO. PRICE
AMB 1330207CP $187.00
*Locking teeth prevent the sprayer from rotating while in the sprayer holder.

ORDER NO. PRICE

AMB 1350204CW $243.00

Bulkhead Sprayer Holder Trinidad™

(for Head/Shower Combo Faucets) 2 Handle Galley (Kitchen/Bar) Faucet

• Chrome • Chrome
• For use with HEAD / SHOWER COMBO FAUCET • Ceramic disc valves
• Single hole mount
SPRAYERS ONLY • High neck swivel spout
• Fits classic or small marine sprayers • Solid brass body and spout with stainless steel

with locking teeth* supply hoses
• ABS plastic • Connections: 1/2” NPS-M
• Stainless steel mounting screws
• Locking teeth

ORDER NO. PRICE ORDER NO. PRICE
AMB 1310212CP $18.75 AMB 1330202CP $183.00

650 WATER SYSTEMS

Recessed Transom Shower Standard Straight Handle Sprayer

Plastic handle with chromed brass head White handle with chromed brass holder and 6’ white
and on/off push button. nylon hose.
Soft cap fits snug and provides water tight On/off trigger or flip up for continuous water flow. Included
seal. Easy installation with a 2-1/4” hole counter top holder leaves the sprayer in a ready-for-action
saw. White with 6’ nylon hose position. Can be connected to any mixing bridge, shower mixer
Water connection: 3/8” BSP-F fitting. 1/2” or cold water control with 3/8” BSP-M hose connection.
NPS Water Connection: 3/8” BSP-F threaded fitting.
1/2” NPT-M
Mounting Hole: 1-1/16”

ORDER NO. DESCRIPTION PRICE
SVK 10055P Transom Shower $85.50
SVK 10252P $16.05
Repl. Cap

ORDER NO. DESCRIPTION PRICE
SVK 10196P Sprayer w/Hose $48.49
SVK 10279P Sprayer Handle (only) $27.78

Elbow Sprayer Handle

Elbow Euro ABS trigger sprayer handle.
Thread Type: 15/1 female metric. White.

ORDER NO. PRICE Recessed Transom Shower
SVK 14000P $45.67
Push-Button recessed shower. Easy to use push button
sprayer handle has built in grab ring for easy deployment.
Mounts vertically or horizontally.

Water connection: 3/8” BSP-F fitting. 1/2” NPS
Material: Plastic and chrome plated brass sprayer with nylon
hose and plastic cup and cap.
Mounting Hole: 2-3/4”

Stainless Steel Angled Washdown

316 Stainless Steel spigot. Mounts easily with 3 #6 screws to
bulkhead. 1/4 turn ceramic valve. Standard 3/4” garden hose
thread for hose attachment. Includes interchangeable FRESH
and RAW pendant.
Water Connection: 1/2” NPT-F Flange Diameter: 2-3/8”

ORDER NO. PRICE ORDER NO. PRICE
SVK 10175P $88.01 SVK 12106P $86.01

Trinidad - Deck Tap Straight Sprayer Handle

• Chrome Straight Euro ABS plastic trigger sprayer handle.
• Ceramic disc valve Thread Type: 1/2” NPS-M. Chrome.
• Single temperature (cold or hot) water only
• Single hole mount
• Solid brass body and spout
• Connection: 1/2” NPS-M

ORDER NO. PRICE ORDER NO. PRICE
AMB 1330211CP $59.26 SVK 14005P $35.79

Fresh Water Inlet WATER SYSTEMS 651

Chrome-Plated Bronze Wash Down Water Outlet

Standard female swivel hose connector. Black plastic Watertight Plug Brass chrome-plated. Allows for garden
and stainless steel bead chain. hose hookup to on board water system for
Pipe size inches 1/2. O.D. Flange inches 2-3/4. use as washdown system. Standard male
hose connector.

ORDER NO. DESCRIPTION PRICE ORDER NO. PRICE
$123.85 SDG 5121201 $22.39
PER 0499DP0CHR Complete Wash Down Faucet
$18.94
PER 0499DP099A Replacement Plug Brass Chrome-Plated

Chrome-Plated Bronze ORDER NO. PRICE

Standard male hose connector. Complete with watertight SDG 5122201 $29.73
black plastic cap and stainless steel bead chain. For use
with on-board washdown systems.

ORDER NO. PIPE SIZE O. D. PRICE Wash Down Faucet
2-3/4” $94.13
PER 0504DP0CHR 1/2” Brass Chrome-Plated/Zinc
Chrome-Plated Handle
Fresh Water Inlet
ORDER NO. PRICE
Brass Chrome Plated SDG 5122101 $24.21
Designed to provide a fresh water hookup to a pressurized water
system while moored. Has standard female swivel hose connector. S.S. Faucet
Complete with black plastic water tight plug when not connected to
on shore water. Pipe size: 1/2” FIPT x 3/4” FGHT. 2-3/16” diameter. 316 Stainless Steel

ORDER NO. PRICE ORDER NO. PRICE
SDG 5121101 $28.00 WHT P2456C $48.39

Fresh Water Inlet Wash Down Fitting

Cast 316 Stainless A bulkhead mounted wash down fitting that is
Designed to provide a fresh water hookup to a pressurized water system inexpensive, functional, easy to install, and rust
while moored. Has standard female swivel hose connector. Complete proof. This injection molded plastic fitting is
with black plastic watertight plug when not 2-1/4” in diameter and mounts in 1-1/4” diameter
connected to onshore water. Pipe size: 1/2” hole with 3 countersunk screws. Barbed hose fitting
FIPT x 3/4” FGHT. connects 3/4” inside diameter tubing. Standard hose
threads with a protective cap which has a retaining
ORDER NO. PRICE strap is standard.
SDG 5131101 $31.49
ORDER NO. DESCRIPTION PRICE
Washdown Water Outlet THM WDV1 Black $32.00
THM WDV1CPDP $32.78
Cast 316 Stainless Chrome
Allows for garden hose hookup to onboard water system for use as
washdown system. Standard male hose connector. Requires separate Washdown Pump Kit
ball or gate valve to regulate water flow.
1/2” FIPT x 3/4” MGHT. The washdown pump provides boaters of small to medium vessels
with a cost conscious and size maximized higher pressure pump. With
ORDER NO. PRICE a sealed pump head and motor, this model provides the same ease of
SDG 5131201 $23.63 installation as all Jabsco water pressure pumps. Each pump includes a
strainer, nozzle, and fittings for most installations.
Wall Mount Pressure Regulated City • Compact 3 chamber design for greater pumping efficiency
Water Entries • Pressures up to 60 PSI
• Corrosion resistant
An exclusive diaphragm design prevents high-pressure damage often • Sealed Motor
caused by city water systems. Leak-tight, stress and crack- • Self priming up to 6 feet
resistant, these high-performance water entries limit • ISO 8846 MARINE
water pressure safely to 65 PSI while meeting or
surpassing all check valve code requirements. (ignition protection)

ORDER NO. DESCRIPTION PRICE ORDER NO. DESCRIPTION PRICE
ITT 329010092 3.0 GPM Kit w/Hose $211.08
SHU 18302914 Chrome $54.55 ITT 329000092 4.0 GPM Pump Kit w/Hose $215.70
ITT 326050092 $188.48
SHU 18302918 White $43.49 4.0 GPM Pump

652 WATER SYSTEMS Stainless Steel Spigot

Flush Mount Stainless Steel Fitting • Polished stainless steel
• Compression valve
Perfect solution to remove that unsightly hose bib deck • Solid cast 316 stainless steel body & handle
fitting and rusty knob. This will enable you to connect your water hose in • Solid 316 stainless steel compression cartridge
seconds. • Single temperature (cold or hot) water only
• Position his 316 Stainless Steel fitting close to your anchor windlass to • Ideal for raw fresh or salt water - No green slime!
• Single hole mount
clean those muddy anchors. Or locate one on each side of your vessel • Connection: 1/2” NPS-M supply and 3/4” NH-M
to make those cleanups much easier.
• Just combine the Quick Release Deck Washdown fitting with hose bid (standard garden hose)
a Hose Coil Washdown hose and a high volume Jabsco
PAR-Max 4 Washdown pump to keep the deck clutter free. ORDER NO. PRICE
• The included hose adapter comes with a pre-installed check
valve that connects your hose with a simple twist to the AMB 1330216CP $123.00
deck fitting.
• Deck fitting 1/2” npt female x 3/4” garden hose
thread male.

ORDER NO. PRICE
ITT 319110000 $122.49

Jabsco/Flojet Pump Fittings

These fittings are manufactured for Jabsco and Flojet pumps with quick
connect ports.

2088 Series Pump Repair Kits ORDER NO. DESCRIPTION PRICE
ITT 306421000 3/4” 90˚ Barb Elbow $5.14
The popular Shurflo Model Series 2088 pumps ITT 306511000 1/2” 90˚ Barb Elbow $5.05
can be repaired in just minutes by merely ITT 306531000 3/4” Barb Straight $5.05
removing the old pump head and sliding the ITT 306541000 1/2” Barb Straight $5.05
new head on.

Pump Model Replacement Kit Pumphead Kit Non-Return Valves
2088-423-344 94-236-03
2088-433-344 94-236-03 ORDER NO. PRICE Simple way to maintain prime in a suction or
SHU 9423603 $98.07 discharge line. Designed to fit in-line. Suitable for
3/4” (19mm) and 1-1/2” (38mm). Suitable for use
with manual or electric pumps.

Switch & Upper Housing ORDER NO. DESCRIPTION PRICE
WHA LV1219 For 3/4” (19mm) $19.24
ORDER NO. SWITCH PRICE WHA LV1215 For 1-1/2” (38mm) $22.24
SHU 9423110 F/2088 Series $95.31

Straight Fitting-Wing Nut Swivel 1/2” FPT Hose Elbows

Clam pack (2) Prevents, hose crimping and strain, and
extends hose life. With Easy Gripper for
ORDER NO. BARB SIZE PRICE easy-on, easy-off. Made of zinc-plated metal
SHU 9418104 1/2” $13.18 for years of trouble-free use.
SHU 9418103 3/4” $14.28
SHU 9418102 5/8” $14.28

Elbow Fitting-Wing Nut Swivel 1/2” FPT

Clam pack (2)

ORDER NO. BARB SIZE PRICE ORDER NO. DESCRIPTION PRICE
SHU 9418112 1/2” $13.18 CMC 22504 90 Degree $8.24
SHU 9418110 5/8” $16.49 CMC 22603 45 Degree $8.24
SHU 9418111 3/4” $14.28

WATER SYSTEMS 653

Heavy-Duty Strainer PNC Series - Check Valve

Full flow design, with long life, easy cleaning and corrosion resistant A check valve is placed inside to prevent back-flow in plumbing systems.
nylon bowl. Designed specifically to work in both fresh and salt water The check valve imposes almost zero flow restriction, and requires less
applications. 3/4” Female NPT ports 20 mesh screen. than 1/2 PSI to open. Colored bands indicate flow direction (green to
red), confirmed by the permanent laminated tag. Sizes 1/2” to 2”. Do not
ORDER NO. PRICE use in diesel fuel or gasoline application
ITT 363001000 $68.93 Opening pressure = .45 psi

ORDER NO. PIPE SIZE PRICE
GRC PNC500 ½” $17.00
GRC PNC750 ¾” $19.00
GRC PNC1000 1” $25.00
GRC PNC1250 $38.00
GRC PNC1500 1-1/4” $44.00
GRC PNC2000 1-1/2” $52.00

2”

Pump Inlet Strainer In-Line Check Valve

• Protect fresh water pumps from supply • Prevents back-surge
tank debris. • Fits 1/2” hose and threaded connectors

• White Nylon strainer head and clear plastic sight glass. Glass unscrews ORDER NO. PRICE
for filter basket removal and cleaning. Non-metallic basket
SHU 340001 $19.04
• Mount brackets are included.
• Use in fresh or saltwater and for continuous duty AC or genset

Sink Drain with Strainer

Straight 2”.

ORDER NO. DESCRIPTION PRICE

SDG 5175251 Drain w/ Stopper $9.27

ORDER NO. SIZE PRICE Check Valve
GRC WSB500P 1/2” $41.00
GRC WSB750P 3/4” $44.00 • Installs easily in a 3/4”
GRC WSB1000P 1” $66.00 plumbing line
GRC WSB1250P 1-1/4” $67.00
• Stops backflow
Pressure Switch Assemblies • Helps maintain pump prime

ORDER NO. SWITCH PRICE ORDER NO. PRICE
FLJ 02090104 F/4405-143 $44.59
FLJ 02090118 F/04305 $44.59 RAR RCV75 $34.73

Guardian™ Raw-Water Strainer

Keeps your bait tank, livewell and washdown
pumps protected from harmful debris. The Raw
Water Strainer features a clear twist off bowl and removable stainless
steel screen, which allows for easy inspection and cleaning. An integral
o-ring creates a tight seal, eliminating possible leaks. Keep your pumps
and components lasting longer by protecting them with the SHURflo
Raw Water Strainer.

Strainers – Inline 40 Mesh Screen

ORDER NO. INLET OUTLET PRICE ORDER NO. DESCRIPTION PRICE
FLJ 01740000A 3/4” Barb 3/4” Barb $22.06 SHU 25312001 1/2” with 50 mesh screen $39.44
FLJ 01740014A 1/2” Male Quest Thread Quad Port 90° $19.86 SHU 25322001 3/4” with 50 mesh screen $44.52
SHU 25332001 1” with 50 mesh screen $64.84
SHU 25340001 1-1/4” with 50 mesh screen $70.25

654 WATER SYSTEMS

Water/Holding Tanks

Todd’s one piece molded Water/Holding Tanks are tough and durable. Each tank fully complies with
FDA regulation CFR 177.1520. All tanks satisfy all United States Coast Guard standards. Polyethylene
tanks will not emit waste odors or change the taste of fresh potable water.
All openings are female NPT (National Pipe Threads) and are located in the same relative position on
one end of the tank. Supplied plugs make water tanks or holding tanks.

ORDER NO. CAPCITY LENGTH WIDTH HEIGHT PRICE
TOD 851667WH 9 Gallon 17” 14” 10” $137.69
TOD 851626WH 13 Gallon 24” 10” 14” $160.89
TOD 851666WH 20 Gallon 30” 16” 10” $193.06
TOD 851532WH 25 Gallon 37” 10” $230.53
TOD 851525WH 35 Gallon 36” 17-1/2” 16” $272.55
15-1/2”

SHURflo In-Line Strainers ORDER NO. DESCRIPTION PRICE
SHU 255313 1/2” Male x 1/2” Female $13.18
The SHURflo In-Line Strainers are recommended on all fresh water SHU 255323 1/2” Barb x 1/2” Female $13.18
pumps to protect your pump from debris. Easy twist off clear bowl SHU 255315 1/2” Male x Swivel Nut $15.38
makes cleaning a snap. Available in both 1/2” threaded and barb.
• Stainless Steel
• 50 Mesh
• Poly Top with Nylon Clear Bowl

“Pumpgard” In-line Strainer Pumpgard Snap-in Strainer

Pumpgard prevents dirt and other Snap-in design fits directly into inlet on PAR-MAX water system
particles from entering pump intake allowing pump pumps for quick, easy installation. Strainer base has sturdy
to run cleaner and longer. Works in any position, just support leg for secure mounting. Includes both 1/2” barbed and
remove one screw for inplace cleaning. Transparent 1/2” threaded inlet ports for most common installations. The
housing for quick inspection. 50 mesh stainless steel snap-in inlet port also accepts any optional PAR-MAX port fitting,
filtering screen. making it a great solution where
space is limited, or when adapting
ORDER NO. DESCRIPTION PRICE 364001000 to different types of hose.
ITT 464000002 1/2” ID hose $25.94 464000002
ITT 464000000 3/4” ID hose $25.94 ORDER NO. PRICE
ITT 464000004 1/2” Thread $25.94 ITT 364009000 $45.23
ITT 364001000 1/2” Thread $27.32
ITT 464000010 $25.94
3/4” ID hose x Plug-in 90°
ITT 464000012 90° 1/2” ID hose x $25.94
Direct Plug-in

Fish Box Evacuation Pump Baitwell Tanks

This 5 GPM self priming pump with 1-1/2” • These space-saving units are
ports is designed for passing typical debris, such as bait constructed of linear polyethylene that’s
residue, particles of ice, fish scales etc. Its dry running seamlessly molded into a one-piece,
capabilities and the 360˚ rotatable head allow this pump to no-fail system
be mounted in almost any position in the boat, allowing for
total flexibility. • Offers a rust-proof, UV-stabilized design
• 360˚ rotating head for flexible installation • Conveniently features a removable
• Capable of extensive dry running
• Compact and simple design cutting board with molded in ruler
• Filter-less design • Blends nicely with fiberglass
• Quiet running • Provides durable, dependable nominal
• Corrosion-resistant parts
• 12 volts/15 amp draw 0.200” wall thickness

ORDER NO. PRICE ORDER NO. SIZE DESCRIPTION PRICE
ITT 509001000 $459.95 MOE 43223 23 gallon 30.25”L x 18.8”W x 14.75”H $148.77
MOE 43124 24 gallon 32”L x 16.13”W x 18.13”H $154.38
MOE 43125 25 gallon 22.88”L x 15”W x 22.13”H $155.47

SANITATION 655

ECO Holding Tank Vent Filter Noz-All™ Pumpout Adapter

Advanced Odor Removal – Easy to Install & Replace The Noz-All heavy-duty glass-filled nylon adapter
The innovative concave shape of the SeaLand ECO vent filter provides an air-tight seal between your boat’s deck waste fitting and the
assures that malodorous gases are completely filtered through pump out station nozzle. The adapter is tapered
activated odor-adsorbing charcoal media. The result is more to seal tightly with pump out nozzle assemblies.
thorough odor elimination Works with both the rubber nozzle type and the
Dimension: 18.125”L x 3.125”W x 3.125”H cam-operated type of suction hose fittings.
Complete kit includes fitting for popular vent hose ID sizes: 5/8 in., 3/4 in.,
1 in., and 1-1/2 in. (16mm, 19mm, 25mm, and 38mm)

ORDER NO. PRICE
SLN 309311001 $115.01

Holding Tank Installation Kits ORDER NO. DESCRIPTION PRICE

Include all fittings needed to attach hoses to SLN 310343502 1-1/2”,11.5 t.p.i. Noz-All Adapter $32.68
a holding tank. The opposite end of the fitting SLN 310343503 1-1/4”,11.5 t.p.i. Noz-All Adapter $32.68
accepts the hose. All kits include Teflon Tape for
easy installation and tight fit. Holding Tank Kits “WASTE” Fittings
feature: (1) 1/2” hose barb, (2) 1-1/2” hose barbs
FOR USE IN EMPTYING HOLDING TANKS
Pressure Cast Bronze - Chromium-Plated With
O-Ring – Airtight – Complete with Key.
Complies with adopted standard on “Fittings” A.B.Y.C. recommended
practices and standards covering sewage holding and/or treatment
devices for marine waste systems.

SIZE SIZE

Straight Pipe Outside
Thread Diam. Plate

1-1/2” 3-5/8”

ORDER NO. PRICE
PER 0524DP0CHR $148.66

ORDER NO. DESCRIPTION PRICE Fireboy-Xintex Fresh Water and
TOD 932220 Straight fittings $23.95 Holding-Tank Monitors
TOD 932221 90 deg. fittings $31.29
Senders are simple, solidly constructed
Water Valve units with no moving parts, thus no
floats to stick. Hookup consists of simply
Fits all Sealand Traveler Toilets. connecting 12 V DC power and the two-
wire senders.
Senders sold separately.

ORDER NO. PRICE ORDER NO. DESCRIPTION PRICE
SLN 385314349 $44.93 FRB LLM1 $97.98
FRB LLM2 Holding tank monitor $117.54
Floor Flange Seal Kit Combo water & holding
FRB PFS11 $116.05
Fits all Sealand Traveler Toilets. tank monitor

11” Sender

Toilet Bowl Seal Kit-w/ Overflow Holes

Replaces worn toilet bowl seals
on VacuFlush, Traveler and other
SeaLand toilets.

ORDER NO. PRICE ORDER NO. PRICE
SLN 385310063 $27.23
SLN 316140 $40.99

656 SANITATION

SANITATION SYSTEMS

Porta Potti 260B Portable Two-Piece Fresh Water Toilet 260P MSD Marine Head with Pumpout

• High-gloss, easy-to-clean finish. • Hooks up easily for dock side discharge.
• Convenient, no-splash pour-out spout. • Adapts to thru-hull fittings for discharge in
• Bellows flush
• Lid latch unrestricted waters.
• Built-in storage compartment for holding • Hold down brackets secure unit to

tank deodorant. deck or floor.
• Fresh water flush. • Easy-to-clean high-gloss finish.
• 2.6-gallon waste holding tank detaches • Level gauge indicator for

for easy emptying. waste holding tank.
• Includes hold down kit • Lid latch.
• 13-9/16” W X 15-1/16”L X 12-1/8”H. • Exclusive no-spill fresh water fill/

ORDER NO. PRICE vent cap.
• 2.6 gallon waste holding tank
THT 92862 $151.68
detaches for easy emptying.
Dimensions:
12-1/8” H x 15-1/16” L x 13-9/16” W

Porta Potti® 135 Bellows ORDER NO. PRICE
Replacement Parts THT 92868 $211.01

ORDER NO. DESCRIPTION PRICE Porta Potti® Curve
THT 07862 Replacement Bellows $25.41
THT 07024 $4.78 • Battery-powered flush
Inlet Tube • Sleek, modern and homelike design
• Comfortable seat height
Porta Potti 550P MSD Portable Marine Toilet • Increased bowl size
• Hidden controls
Designed to Make Dockside Pumpout a Breeze • Improved water tank carrying handle
This durable toilet is sanitary, odorless and leakproof. • Optional hold down kit
Plus, high-gloss finish is easy to clean! • Integrated toilet paper holder
• Piston pump flushes fresh water to • Holding tank level indicator for fresh water

clean bowl. and waste tanks
• Sealed valve keeps odor in holding Color: White
H x W x D:
tank. 17.6” x 13.3” x 17.7”
• Built-in deodorant storage (bottle
ORDER NO. DESCRIPTION PRICE
included). THT 92360 Porta Potti® Curve $251.78
• Piston Pump Flush THT 92415 Optional Hold Down Kit
• Hold down kit secures toilet to deck. $25.90
• Easy-to-read Level Indicator tells when

it’s time to empty.
Dimensions: 16-1/2” H, 16-1/2” D, 15” W

ORDER NO. PRICE
THT 92856 $255.88

Portable Toilet Porta Potti® 260P Sealed, Two-Piece Fresh Water

Portable toilets are compact and lightweight. Holding tanks Flush Marine Head
are detachable for easy emptying. Features a leak-proof
design with locking lid to prevent spills. Sealing slide valve • Easy-to-clean high-gloss finish.
allows easy flushing and locks in odors. • Exclusive Rotating Pour-Out Spout
Sturdy construction with durable parts
and seals. for no-splash emptying.
• 2.6 gallon holding tank is detachable • Piston Pump Flush
• Sealing slide valve locks in odors and • Level gauge indicator for waste

protects against leakage holding tank.
• Side latch secures the tank to the toilet • Lid latch.
• Bellow-type flush and sturdy construction • Exclusive no-spill fresh water fill/
2.6 gal (12.5”H x 16.25”W x 14.5”D)
vent cap.
• 2.6 gallon waste holding tank

detaches for easy emptying.
• Includes hold down kit.
Dimensions: 12-1/16” H,
15-1/16” D, 13-9/16” W.

ORDER NO. PRICE ORDER NO. PRICE

CMC 41531 $99.35 THT 92865 $176.95

SANITATION 657

SaniPottie® MSD’s are Our Most Versatile Heads Elegance

SeaLand’s MSD models can be used as completely self-contained The most advanced toilet in it’s class Featuring Vortex-Vac Technology
portables, or they can be installed for direct overboard discharge where The Marine Elegance toilet features:
legal, for dockside pumpout, or for discharge into remote holding tanks. • Quiet operation
SaniPottie MSD’s have 3.2 gallon fresh water supply, and either 3.0 or • Unmatched rinsing capabilities
5.2 gallon holding tanks. Both made of tough polyethylene that is easy • Low water consumption
to clean. • Built in shredder reduces clogs
• Built in loop design eliminates odors
964MSD 965MSD • Can pump 10ft vertically, and 100ft horizontally
Optional intake pump to utilize raw water for flushing
311196402 311196502
14-1/2”W x 16 1/2”D x 12”H 14-1/2”W x 16-1/2”D x 15-1/2”H Smart Flush Control offers:
• Fully programmable, easy to use
ORDER NO. MODEL COLOR CAPACITY PRICE
control
• Attractive wall mount design
• Flush using no water, little water, or

timed flush
• Optional Lock out feature when

tank is full

14” W x 18-3/8” D x 14” H

ORDER NO. PRICE

RAR 220HF012 $1,044.99

SLN 311196402 964MSD Parchment (Tan) 3.0 gals. $203.05

SLN 311196502 965MSD Parchment (Tan) 5.2 gals. $235.20

* Includes stainless steel hold down brackets

SaniPottie® 970 Series Portable Toilet SaniPottie 962 Portable Toilet

Comfortable and Convenient. Delivers unsurpassed comfort and Bellows-style flush delivers a bowl clearing
rinse every time.
convenience in an attractive, economical package. Available in portable • 2.5-gal. waste tank capacity
• 2.6-gal freshwater tank
and permanently installed models, with 2.8- and 5.0-gallon holding • High-density polyethylene construction

tanks, and in platinum and colors, the 970 series offers a perfect choice withstands demanding conditions
• Easy-to-clean, scratch-resistant finish
anywhere a portable toilet is needed. • Firm-locking side latches

Features: • Adult-size seat with latching lid Color: Parchment
• Powerful flushing • Easy disposal
• Stylish design, robust quality • Two-year limited warranty ORDER NO. DESCRIPTION PRICE
• Tank level indicator SLN 301096202 SaniPottie 962 $146.19
SLN 385310018 Optional Hold Kit
• Splash-free performance $23.37

974 MODELS 975 MODELS Traveler™ 711M28 Marine Sanitation System
14.75”L X 13.25”W X 11.875”H 15.125”L X 13.5”W X 14.75”H
Ideal replacement for recirculating toilets. China bowl is rinsed with fresh
water from onboard demand system. No electrical connections. Integral
anti-syphon vacuum breaker protects potable water supply. Water level
and flushing action controlled by single pedal control. Holding tank
capacity is 9.5 gallons. Discharge
connection is 1-1/2” hose insert. Vent
connection is for 5/8” hose. Water
connection is 1/2” MPT. Includes
stainless steel mounting bracket and
hardware.
18-7/8” W X 19-1/4” D X 20-5/8” H.

ORDER NO. CAPACITY MODEL/TYPE PRICE

SLN 301097402 2.8 Gal. 974/Portable $208.06

SLN 301097502 5.0 Gal. 975/Portable $244.10 ORDER NO. COLOR PRICE
SLN 312371101 White $851.06
SLN 301197402 2.8 Gal. 974MSD/Portable/permanent $237.14 SLN 312371103 Bone $850.09

SLN 301197502 5.0 Gal. 975MSD/Portable/permanent $270.99

658 SANITATION

Manual Head Manual Marine Toilet w/ Twist-N-Lock Handle

With retractable handle! The pump assembly is angled forward to provide a natural smooth
Easy action pump provides strong flushing action to keep bowl clean. stroke action and the convenient top mounted dry bowl selector is easy
High quality materials, vitreous china bowl, base and housing are to operate. If desired, the pump and base can be assembled for left
injection molded white thermoplastic. Easily installed above or below hand installation. The base assembly is fully skirted to eliminate the
the water line. debris traps associated with most other toilets. Should the seal ever
Dimensions: 14-1/2” H, 16-1/2” D,17-1/2” W. need to be replaced, the external seal and rod guide assembly can be
easily removed without disassembling the pump. Dimensions: 13-3/16”
H; 17-3/4” W; 16-3/4” L

ORDER NO. DESCRIPTION PRICE ORDER NO. DESCRIPTION PRICE
RAR PHII Manual-Regular Bowl $620.00 ITT 290903000 Manual Marine Toilet $277.81
RAR PHRKII PH II and PHE II Repair Kit $73.68 ITT 290403000 Hand Pump Assembly $124.10
RAR PHRKIIC Cartridge Seal PH-PHE Repair Kit $80.00 ITT 290450000 Service Kit (up to 1997)
RAR 1238A Replacement Seat & Lid; Std. Bowl $48.42 ITT 290452000 Service Kit (1998-2007) $80.29
ITT 290512000 Pump Cylinder Assy. $78.95
ITT 290411000 Base, Plug & O-Ring Assy. $62.78
ITT 290453000 $54.33
Service Kit 2008- $78.89

SeaEra™ Electric Toilet Crown Head

12V DC Integral pump marine-size toilet with white bowl Deluxe all electric toilet constructed of long life materials: vitreous china
• Quick and easy raw water flush installation bowl, bronze and stainless steel parts. The push of a button activates
• Bowl can be rotated 90° for mounting in confined space powerful flushing action that keeps bowl clean. Automatic maceration
• Heavy-duty marine push button improves the efficiency of most marine sanitation devices. Easy to install.
The Crown Head can be installed either above or below the water.
switch included
• Straight discharge, fits both 1-1/2” and 1” discharge line

with no adapters

ORDER NO. PRICE ORDER NO. DESCRIPTION PRICE
RAR 160MI012 $760.00 RAR C912 Std. Bowl $1,790.00
RAR CHRK
RAR CSRK Standard Crown Head Repair Kit $131.58
RAR 1238A Crown Centrifugal Model Repair Kit $142.10
Replacement Seat & Lid; Std. Bowl
$48.42

Electric Toilet, Deluxe Series SANITATION 659

• Space saving stylish design Quiet Flush Toilet
• Household size seat
• Virtually silent operation for undisturbed sleep This toilet has an extremely quiet flush cycle similar to a quiet
• Choice of “one touch” flush cycles for minimal water usage flush household type toilet.
• Anti-blocking centrifugal flush pump Toilet connects to any pressurized water source with at least 3-1/2
• High gloss vitreous china bowl gallons of water per minute. Operates with salt or fresh water and
• No “dirt traps” for maximum hygiene and easy cleaning includes an anti-siphon breaker valve to prevent contamination of the
• Fully user-serviceable vessels potable water supply. Bowl is easy-to-clean white vitreous china.
12 Volt 10 Amps. Fuse size 25.
Dimensions: 13-3/4” H x 17-5/8” L x 13-7/8” W.

ORDER NO. PRICE ORDER NO. DESCRIPTION PRICE
ITT 580201012 $989.69
ITT 370450092 Quick Flush Toilet $859.93
ITT 441061000 Check Valve Kit $8.38

Electric Head Seaclo Repair Kit

Simply push a button to flush. Self-priming flexible impeller flush pump 1520 For Head-Mate
scours bowl. Efficient macerator and high capacity scavenger pump
grinds up waste and pumps it out. Pure white vitreous china bowl, baked
enamel seat and cover. Corrosion resistant materials throughout. Built-
in backflow preventer in discharge. Can be installed above or below
waterline, base assembly can be rotated for most convenient plumbing
connections. Can be used with holding tank or with flow-through
treatment devices. Includes 1” to 1-1/2” hose adapter for discharge
port. Inlet 3/4” hose, outlet 1” hose,12 Volts DC. 16 Amps, Fuse size 25.
Dimensions: 13-3/4” H x 17-5/8” L x
13-7/8” W.

ORDER NO. DESCRIPTION PRICE

ITT 370100090 Electric Head $681.11
ITT 370400000
ITT 370410010 Service Kit $65.63
ITT 370640000
ITT 441061000 Motor Pump Assembly $297.82

Motor Only $191.18 ORDER NO. PRICE
THT 37057 $94.98
Check Valve Kit $8.38

660 SANITATION

Electric Toilet Conversion Kit

Converting a manual marine toilet to simple pushbutton electric operation is easy with the toilet conversion kit. It can be fitted with
the Raritan P.H. or Compact, Wilcox Crittenden “Head Mate”, Groco HC, PAR or Brydon 59128-Series, and virtually any other marine
toilet using 3-3/4” diameter bolt circle with a 4-hole pattern base.
The self-priming flexible impeller flush pump rinses the bowl while the powerful macerator scavenger pump grinds up and pumps out waste. A
built in backflow preventer is included in discharge. A heavy duty push-button switch and 1” to 1-1/2” hose adapter for the discharge port and all
clamps and fasteners to complete the conversion are included.
Inlet 3/4”, discharge 1”.

ORDER NO. VOLT DC AMPS/FUSE SIZE PRICE

ITT 370100092 12 18/25 $553.29

ORDER NO. DESCRIPTION PRICE
ITT 370400000 Seal and Gasket Service Kit $65.63
ITT 370410010
Replacement Pump $297.82

Electric Flush Pump

Converts Jabsco manual toilets to electric convenience…
The Electric Flush Pump converts all Jabsco manually operated toilets to convenient electric operation. With the
optional adapters it can be installed on almost any manual toilet. Once converted, the toilet is flushed by simply
turning the large control knob on the top of the pump assembly. The self-priming flushing pump rinses the toilet
bowl while the waste pump macerates and evacuates the waste. The operator selects from two operating modes to
either flush the toilet bowl or drain it. The spring-loaded control knob always returns to the off position. Inlet port fits
3/4” hose. Height 10-1/2”, width 4”, depth 7-3/4”.

ORDER NO. VOLT AMP FUSE PRICE

ITT 292000120 12 24 25 $606.84

ORDER NO. DESCRIPTION PRICE

ITT 291010000 Impeller Kit $86.57

Sea Era Conversion Kit

An inexpensive way to replace your electric or manual toilet. Save the toilet bowl and seat and replace the lower base.
Benefits: • Economical electric macerating marine toilet.

• Sea Water models can be run dry without damaging the pump.
• Low power consumption and quieter operation for on-board pressurized freshwater models.
• Heavy-duty marine push button switch is included.

ORDER NO. DESCRIPTION PRICE Options:
RAR 162LF012 Freshwater Version $871.96 • Available in raw water with integral intake pump or on-
RAR 160LI012 Raw water version $689.47
board pressurized freshwater lower base models.

Gulper Toilet Pump Manual Sanitation Pump

For Holding Tanks & Vacuum Systems • Can be mounted in various orientations
• Up to 4.75 US gal per minute • Tough plastic housing keeps in nasty smells
• Virtually unblockable • Easy to clean (no tools required)
• Pumps unmacerated waste • Large virtually unblockable valves
• Rotatable inlet and outlet allows flexibility when • 14.8 US gals per minute
• 1-1/2” inlet/outlet
installing in awkward locations • High quality ABS plastic
• Can be mounted in most convenient part of boat • Lightweight
• Self priming up to 9.8 ft. • Hose size 1-1/2”
• Easy to maintain
• Can run dry without damage ORDER NO. DESCRIPTION PRICE
• Large single diaphragm
• Pumps a mixture of air and waste WHA BP0527 Bulkhead $175.76
• 12 Volt
• Hose size 1-1/2”

ORDER NO. PRICE

WHA BP2552B $310.73

SANITATION 661

Macerator Pump

Grinds waste into small particles for easy discharge.
Fully enclosed with stainless steel shaft. Includes Run Dry Protection with self-priming Flexible Impeller and
Stainless wearplate making this pump the ideal solution for emptying marine holding tanks. The unit is self-
priming to a 5’ lift when wet. The macerator section grinds waste to 1/8” or smaller. Flow rate is 12 GPM.

ORDER NO. VOLT AMPS INLET PRICE
ITT 185902092
ITT 185902094 12 16 1-1/2” NPT $336.17
ITT 185981000
ITT 63030003 24 8 1-1/2” NPT $356.45

Service Kit $70.08

Impeller $26.68

Waste Macerator Pump

155 Series waste macerator pumps makes fast work (17 GPM) of holding tank pump-out. Since waste is macerated
BEFORE it leaves the tank, smaller hose and overboard seacock (3/4”) may be used in the discharge line.
Tank Depth 10 inches
12 volt
Note: New pump installations require GROCO
#MP Hardware (tank hardware kit), ordered separately.
Service Note: 155 Series will fit the same mounting used for discontinued MPT or MPS series
macerator pumps.

Models available to fit any tank depth to 36”

ORDER NO. PRICE

GRC 155611012 $659.00

Lavatory Systems - Viking Power 16 Macerator Pump

Compact shower drain, bilge and waste water pump specifically designed This macerator is designed specifically for the harsh marine
to pump waste water, the Viking Power 16 is a single-chamber self- environment. Capable of 13 gpm, it also features a high quality motor
priming diaphragm pump that can be set up in several different pump/ with seamless shell, splash proof motor design with rear O-ring shaft
motor configurations. Perfect for installation in tight spaces, The Viking seal. In addition the innovative
Power 16 features non-choke valves, which means that no in-line filters blade and housing design
are necessary. The pump can not only be run dry, it can also handle a ensures problem free
mixture of air and water without difficulty. The Viking Power 16 is self- pumping. 12V.
priming up to a height of 3 meters. This pump offers quiet operation.
The Viking Power 16 has been built to last, and engineered for easy
maintenance. CE-approved

ORDER NO. DESCRIPTION PRICE
SHU 3200001 Macerator Pump $219.50
SHU 9457100
Impeller Kit $44.05

Macerator Pump

The Johnson TA3P10-19 Macerator pump takes care of toilet waste. For
optimal efficiency locate pump as close as possible to the holding tank.
The pump can also be mounted directly to the toilet bowl or holding tank.
Features
• Self priming to a 6 ft. lift when wet and a 4 ft. lift when dry.
• Inlet port for 1-1/2” hose or 1-1/2” NPT

and discharge port for 1” hose.
• AMP DRAW: 12V, 12 Motor is ignition

protected and meets ISO8846 Marine
requirements.

ORDER NO. DESCRIPTION PRICE

ORDER NO. PRICE JHN 102445301 12V Macerator $281.75
JHN 101335003 $251.42
JHN 091052S9 Impeller $26.50

662 SANITATION Gulper 320 Multi-Purpose High

Waste Pump Capacity Waste Pump

Passes solids and is particularly effective in emptying Designed for multi-drain grey waste or remote mounting bilge pump
holding tanks. The multi-positional pump head offers a • High flow rate 5.3 GPM ensures fast drainage and less pump on time
variety of installation options. • Built on market leading Gulper non-choke valve technology
• 5 GPM (19 LPM) output • Easy access as a remote mounting bilge pump
• Self-priming up to 10 ft. (3 m) • Easy and secure installation
• Capable of extensive dry running • Wrap around securing strap
• Compact and simple design • Ezi-clamp locking ring- simply twist and
• Quiet running
• Flexible installation screw to lock head in desired position
• Corrosion resistant parts 12 VDC
• Complies with USCG 183.410
Fitting: Connections for 1-1/2” ID hose.
Size: 10.9” long x 6.1” wide x 4.4” high.
12 Volt DC model, fuse 15 amp

ORDER NO. PRICE ORDER NO. PRICE
ITT 508901000 $371.42 WHA BP2052B $237.75

Electro Scan Waste Treatment Viking Power 32 Vacuum Waste Pumps

Electro scan consistently controls the electrodes to reduce power Single diaphragm action, 1-1/2” Discharge, handles your toughest
consumption by up to 36%. LCD Display provides detailed waste handling needs! 12 volt. The Viking Power Vacuum has double
information on system. check-valves and can also be used in vacuum toilet systems. The
• Can be used with both manual and electric toilets. pump can be run dry and also handle a mixture of air and water
• Generates its own natural disinfectant from salt water. without difficulty. The Viking Power Vacuum provides maximum flow of
• Treats each flush as waste is generated. 32 liters per minute and is self-priming up to a height of 2.5 (32) or 3.5
• Discharges with treatment levels that are safe for environmentally (Vacuum) meters. Although powered by an electric motor, this pump
can also be cranked by hand in an
sensitive areas. emergency. With its low pulsation and
• Easy to install. muffled rubber grommets, the Viking
Options: Power Vacuum offers whisper quiet
• 12V DC operation.
• Optional salt feed systems
available when using fresh ORDER NO. PRICE
or brackish water JHN 101337307 $377.42

ORDER NO. PRICE

RAR EST12 $1,880.00

Salt Feed Tank For Electro Scan TW-Series Pump

The Electro Scan MC System Runs Dry Without Harm
requires ocean grade salt water in The SeaLand T-Series Pump solves the most serious problem
order to process properly. If the associated with impeller-type macerator pumps--it can run dry
vessel is operated in brackish, fresh without damage. It’s patented, bellows pump has no impellers to
water, cold water or the toilet burn up, and still handles tough marine waste while drawing just 6
system utilizes on board fresh amps at 12 V DC. With the TW12 pump from SeaLand, discharging
water to operate, there is a need your tank is now easy and reliable.
to increase the amount of salt in
the flushing water to operable levels
that will allow the treatment units
process to occur. The Electro Scan
will not function if the amount of
salt in the treatment unit is lower
than its tolerable operating range.
This is where the salt feed system
becomes a necessary addition to
the installation. 12 volt.

ORDER NO. MODEL NO. VOLTAGE PRICE
SLN 317301200 $486.30
TW12 12
SLN 310076 $30.60
ORDER NO. DESCRIPTION PRICE Replacement Duckbill Valve for “S” & “T”
RAR 323005 4 gallon w/ pump $604.99 Series Pumps (Packed 2 Per Card)

Diverter Valve SANITATION 663

• Allows one pump to draw from two locations “Y” Valve
• Enables flexibility of pump installations
• Smooth lever operation “Y” Valves are molded from glass-reinforced Marelon®. Offering
• Precision machined eliminating seepage and odor problems an improved, stronger handle design. They are easily mounted to
• 2 models for 1” and 1-1/2” hose a bulkhead. The valves are operated by a simple 120° movement.
• Teflon® lubricated non-stick operation Positive stops are provided between positions.
• Complies with US Coast Guard rules for Type 3 waste systems

ORDER NO. DESCRIPTION PRICE ORDER NO. BARB SIZE PRICE
WHA DV5606B For 1-1/2” Hose $76.99 FRS 902000 1-1/2” $69.47
WHA DV5630 $89.50 FRS 902001 1” $69.56
For 1” Hose FRS 902007 3/4” $69.46

Marelon Vented “Y” Valve

Loops/Siphon Valve The Jabsco Y-Valve diverts waste from a toilet to either an onboard
holding tank or directly overboard where legal to do so. The large, easy-
Installing a vented loop will ensure that fluids to-turn handle has an integral locking ring that allows it to be locked
will not siphon from tank to tank. Vented loops or sealed in either position. The 1-1/2” curved discharge ports can be
are commonly used in the marine toilet system rotated through 3600 so the discharge hoses can be routed away in
and engine cooling system. The simple valve parallel, at 900 to each other, in opposite directions or either up or down.
system incorporated in the top of the loop It is supplied with both a 1-1/2” (fitted) and 1” straight inlet port for easy
allows air to enter the line when not in use, yet attachment to toilets with 1” discharge hoses.
effectively seals as water or other fluid passes
through. Molded in Marelon®, neither vent nor
loop will corrode. The duckbill one way valve
is designed to seal properly if particulate is
present in fluids.

ORDER NO. SIZE PRICE ORDER NO. PRICE
FRS 903001 3/4” $32.95 ITT 454901000 $106.87
FRS 903000 1-1/2” $36.96

Vented Loops

HVL series bronze vented loops assure clog-free anti-siphon protection for
sanitation or engine exhaust systems. The oversized vent valve can easily be
removed for inspection or cleaning without tools. Mount Hardware is included.

ORDER NO. SIZE PRICE
GRC HVL750 3/4” $139.00
GRC HVL1500 1-1/2” $157.00

664 SANITATION

Sanitation Hose Non Permeable

Shields Poly X Sanitation Hose Especially recommended for transportation
of biological waste, e.g. in combination with
The ultimate sanitation hose - Lifetime warranty against odor permeation. (marine) toilet installations. Made of SBR
Combines the flexibility of a rubber hose with the ultimate permeation rubber with inlays of woven synthetic fabric
resistance of Polyurethane. Poly X can easily be slipped over most fittings. and steel spiral. Withstands temperatures of
Polyurethane cover is very abrasion resistant. between - 40º C and + 70º C.
Glossy cover for easy clean up. 66 Foot lengths
Tube : smooth, white NEOPRENE, chemicals and detergent resistant
Reinforcement : 2 textile fabric plies with one steel wire ORDER NO. I.D. O.D. MAX BENDING PRICE
Cover : smooth, POLYURETHANE, heat, weather, ozone and abrasion VET SAHOSE38 1-1/2” PRESSURE RADIUS
resistant, glossy cover $594.00
Sold in 50’ Ctn 1.9” 14.5 3.9 $429.00
$363.00
VET SAHOSE25 1” 1.4” 14.5 2.9 $330.00

VET SAHOSE19 3/4” 1.4” 14.5 2.5

VET SAHOSE16 5/8” 1.2” 14.5 2

ORDER NO. I.D. O.D. VAC. RATING PRICE

SLD 1051120 1-1/2” 1-27/32” 28 $1,149.86 OdorSafe® Sanitation Hose

Sanitation Hose Best odor barrier of any marine hose
available. Provides the best odor barrier of
• Premium rubber sanitation hose designed specifically for the most any hose available in the marine industry.
critical toilet and holding tank connections. • Up to sixteen times greater resistance

• Tough wire reinforced construction, gives excellent flexibility and bend to sulfurous malodors than the so-called
radius, but specially compounded to give the maximum resistance to “No-Odor” marine hoses!
odor permeation and toilet chemicals. • Available in 1-1/2” for waste line. Sold in
50’ coils.

ORDER NO. PRICE

SLN 306342871 $556.28

ORDER NO. I.D. O.D. LB. BURST LENGTH PRICE MaxFlex™
PRESSURE
SLD 1011120 1-1/2” 1-55/64” 50’ Coil $802.78 Sanitation Hose
SLD 1011124 1-1/2” 1-55/64” 150 12-1/2’ $204.74
150 Smooth wall extra heavy duty
vinyl hose for all sanitation
system connections and
other critical applications.
Provides excellent odor
resistance.

ORDER NO. DESCRIPTION PRICE

Vac. Extra Heavy Duty/FDA SLN 306341116 1-1/2” x 50’ $260.98

Multi purpose, extra heavy-smooth walled, all vinyl hose for critical SLN 306345650 5/8” x 50’ $120.68
sanitation system connections. (Head intake, head to holding tank, holding
tank discharge and pump out.) Pack: 50’ Length.

ORDER NO. I.D. BEND VAC PRICE
RADIUS RATING

SLD 1480586W 5/8” 3 28 $200.00 Vac H.D. Cuffs

SLD 1480346W 3/4” 3 28 $216.39 Right hand thread.For Vac Cuffs
SLD 1481006W 1” 3 28 $259.72 watertight seal apply with
SLD 1481186W 1-1/8” 4 28 $272.22 PVC cement. Left hand thread.
SLD 1481146W 1-1/4” 4 28 $334.72 ORDER NO. SIZE PRICE
SLD 1471120 1-1/2” $5.00 ORDER NO. SIZE PRICE
SLD 1481126W 1-1/2” 5 28 $356.94 SLD 1421120 1-1/2” $6.61
SLD 1421140 1-1/4” $6.50

Super PVC Sanitation Hose Vac X.H.D. Sanitation Hose

Smooth walled PVC compound specially formulated to offer resistance to Extra heavy-duty sanitation hose of smooth white vinyl. Specially
odor permeation. Reinforced with a rigid vinyl helix to prevent compounded to provide excellent resistance to odor permeation and
collapsing in bends and under vacuum. Smooth cover permits clamping (FDA) potable water fill. Also for critical bilge, drain scuppers, live
without cuffs. Use Shield’s Sanitation hose fittings for easy coupling wells, etc. Hard PVC helix gives good flexibility and bend radius. No
insertion. For head to holding tank and holding tank pump out cuffs required.* Don’t use with alcohols, anti-freeze, petro-chemicals or
applications. Test results show this hose gives up to 4 times the life of solvents. Self draining installations are recommended for longest odor
standard PVC sanitation hose. Std. ctn. 50’. free service. Max. operating temps: +10º to +140º F.
Color: White
ORDER NO. I.D. BEND VAC. RATING PRICE Sold in 50 ft. cartons. Price per roll.
SLD 1441006 $332.78 3 year warranty.
SLD 1441126 $453.61
1” 3 28 ORDER NO. DESCRIPTION PRICE
TRD 1481006 1” $300.00
1-1/2” 5 28 TRD 1481126 $422.22
1-1/2”

SANITATION 665

Aqua-Kem® Holding K.O. Kills Odors

Tank Deodorant K.O. is a holding tank treatment specially formulated for today’s marine
market. Unlike chemical products, K.O.’s bioactive formula breaks down
• The most powerful odor control available and neutralizes odor-causing waste materials instantly.
• Liquefies waste and breaks down tissue • Odor-killing bacteria digests liquids, solid waste and paper
• Does not require adding “tissue digesters” or other “boosters”
fast to prevent clogging
• 100% biodegradable to be effective
• A small amount of K.O. can easily keep a boat odor-free
ORDER NO. SIZE CTN. PRICE
between pump outs
THT 94078 128 Oz. (Gal.) Bottle 4 $40.55 • A safe, non-chemical and nonpolluting product

THT 94079 32 Oz. (Qt.) Bottle 12 $13.70

THT 94080 6-Pack of 8 Oz. Bottles 6 $20.49

THT 94081 3-Pack of 8 Oz. Bottles 12 $11.97 ORDER NO. SIZE PRICE
RAR 1PKO22 22 oz $15.29
THT 94082 *Toss-Ins 6-Pack 12 $15.06 RAR 1PKOGAL Gal $52.00

*Aqua-Kem Toss Ins Heads up Holding Tank Deodorant

The ultimate in convenience! Simply toss ‘em in to the tank. These
water-soluble packets dissolve fast to deliver great deodorizing power
and cleaning action.

Scented Aqua-Kem® • Works instantly to control odors in
black or grey water holding tanks.
Same great performance as traditional blue
Aqua-Kem®! The most powerful odor control available. Lightly • Economical.
scented liquid holding tank deodorant liquifies waste fast in • Long lasting pleasant fragrance.
all temperatures. Breaks down tissue to help prevent clogs. • Detergent additive helps keep
Powerful detergents keep tank clean. 8 oz. per 40 gallon tank.
holding tanks clean.
ORDER NO. DESCRIPTION SIZE PRICE • Helps break down waste and tissue.
• Use in Marine/RV holding tanks,
THT 36568 Powder Fresh 32 oz. $11.33
Recirculating and portable toilets.
Holding Tank Deodorant • Non-toxic.
• Non-formaldehyde formula.
• Works instantly to control odors.
• Long lasting, pleasant fragrance. ORDER NO. SIZE UNITS PRICE
• Detergent additive helps keep holding tanks clean. MKT 4532 Qt. 12 $18.54
• Breaks down waste and tissue.
• Biodegradable - septic tank safe. Eco-Smart™ Holding
Recommended for use in RV/marine holding
tanks, recirculating and portable toilets. Tank Deodorant

ORDER NO. SIZE PRICE • Formaldehyde-Free Formula
• Superior odor control
SLN 379700027 32 oz. $18.52 • Quickly breaks down and liquefies waste

Max Control Advanced Liquid and tissue to prevent messy clogs
• Detergent additive keeps tanks clean
Holding Tank Deodorants • Non-staining green dye washes clean with

Get the most powerful, longest-lasting odor control soap and water
without formaldehyde with this line of “Advanced” • Liquid or Toss-Ins, the ultimate in convenience!
formula products. Longest-lasting waste tank odor
control – even in hot weather. Breaks down waste and ORDER NO. SIZE PRICE
toilet tissue for clog-free effectiveness. THT 32952 Toss-Ins (12-pk) $14.37
Just 4 oz. liquid deodorant treats a 40-gallon holding THT 32949 $17.42
tank. 36 oz. Liquid

ORDER NO. SIZE CASE PRICE TST® Deodorizing Tabs

SLN 379700029 4-pack 8-oz. Bottles 4 (4-packs) $37.89 Deodorize black and grey water tanks with these
compact tablets. One tab treats up to 40 gallons.
SLN 379700027 32-oz. Bottle 4 (32-oz. Bottles) $18.52 Use in portable and marine toilets and grey
water tanks.

Max Control Drop-ins Advanced ORDER NO. PRICE

Holding Tank Treatment CMC 41152 $7.86

Get the most powerful, longest-lasting odor control without Enzyme Action & Deodorant
formaldehyde with this ‘‘Advanced” formula product. Keep the Headzyme Tabs™
entire toilet systems in optimum working condition.
• Longest-lasting waste tank odor control – even in hot weather The latest in toilet treatment combines billions of
• Breaks down waste and toilet tissue for clog-free performance, active microorganisms to break down waste with a
citrus deodorizer. Biodegradable, non-toxic, easy
easy and thorough tank discharge to use. For portable toilets and holding tanks. No
• Compatible with MasterFlush® electric macerator toilets and more spilling or measuring head chemicals - one
tablet is good until head is pumped or drained.
Sealand® gravity-discharge toilets 12-pack, 1.5- Environmentally safe. Contains No Formaldehyde
oz. drop-ins, Max Control Advanced granulated
ORDER NO. SIZE PRICE
ORDER NO. PRICE
SLN 379711001 $15.98 MDR 736 6 tablets/card $7.29

666 SANITATION

Premium Enzyme Marine Premium Enzyme Marine
Toilet Treatments Toilet Treatment –
Singles™
• Digests waste and tissue
• Stops odors up to 7 days • No mixing or measuring
• No harmful formaldehyde • Just 1 bottle treats 40 gallons

• Just 2 oz. treats 40 gallons ORDER NO. SIZE CTN. PRICE
• Septic tank safe $17.36
• 100% biodegradable

CMC 41351 (8) 4 oz. Bottles 4

ORDER NO. SIZE CTN. PRICE
CMC 41354 32 oz. 6 $10.63
CMC 41352 16 oz. 6 $6.25

TST® Marine Head Treatment C.H. Hoses and Tank Cleaner

Formaldehyde Free • Non-staining color Specifically designed to remove uric scale
from black water system from the toilet to the
• Stops odors up to 7 days • Treats holding tanks & grey water tanks tank without having to remove hoses!
• Eliminates clogs which can cause poor flushing
• Light, fresh fragrance • Environmentally safe–
performance
• All weather odor protection 100% biodegradable • Non toxic, biodegradable and safe to use with

32 oz bottle all materials commonly found in black water
Ultra-concentrated formula stops odors, systems
breaks down waste and leaves a fresh scent. • Safe and effective replacement to the
Safe for marine applications. muriatic acid treatments recommended in
Requires just two oz. per 40 gallons. Lectra/San and Electroscan waste
4 oz 8 packs treatment systems
Single-dose treatments require no mixing or
measuring. Each 4-oz. bottle treats 40 gallons. ORDER NO. SIZE PRICE
RAR 1PCHGAL Gal. $112.99

ORDER NO. SIZE PRICE Tissue Digester
CMC 41362 32 oz. $8.95
CMC 41361 (8) 4 oz. bottles • Now with 20% more free!
$14.00 • Prevents tissue build-up and clogging.
• Keeps drain lines clean and free flowing.
• Safe for all waste treatment systems.

ORDER NO. SIZE CTN. PRICE
THT 15844 19 oz. 12 $11.68

Instant Fresh Tiolet Treatment

Available in two pleasant scents —
Lemon and Pine.

Non-Formaldehyde, biodegradable formula Sew Clean® Black Water System Cleaner
allows pump out at any dumping station.
Latest technology lubricants keep drain Eliminates Problematic Clogs and Odors from Black Water Systems
valves from sticking. Breaks down waste Clogs and nasty odors are an unpleasant reality in the marine industry.
quickly and efficiently. Non staining. The best and most proven method of removing
any buildup of uric scale in black water systems.
Formulated to target uric scale and clean sewage
systems form toilet to tank, this proven solution
can dissolve clogs causing plumbing to overflow
and create nasty odors. Foam and bacteria
are significantly reduced while flushing. Like
all of TRAC’s products, Sew Clean is nontoxic,
biodegradable and safe to use on all types of
material commonly found in black water systems.

ORDER NO. SCENT SIZE CTN. PRICE ORDER NO. SIZE CTN. PRICE
TRE 1218MQ Qt. 12 $24.60
SBC 71761 Lemon 8 oz. 6 pk. 6 $31.99 TRE 1218MC Gal. 4 $72.12
SBC 71716 Lemon 16 oz. 12 $14.38
SBC 71718 16 oz. 12 $14.38
Pine

SANITATION 667

C.P. Toilet Cleaner TST RV & Marine Toilet Tissue

C.P. Eliminates the worst raw odors from the intake line Fast-dissolving, clog-resistant toilet tissue is
without brushing. The only toilet bowl cleaner Raritan biodegradable and septic tank safe. Contains
recommends for Raritan toilets. C.P. is the only bowl no dyes or perfumes. 1 or 2 ply.
cleaner that can be combined with K.O.
• The first bowl cleaner to combine a specialized strain ORDER NO. DESCRIPTION PRICE
CMC 40276 TST 1 Ply Toilet Tissue 4-pk $3.43
of bacteria with 100% biodegradable cleaning agents CMC 40274 TST 2 Ply Toilet Tissue 4-pk $5.98
• Specially designed to make the bowl shine like never
AQUA-SOFT Toilet Tissue
before and keep the entire system odor-free
• Leaves toilet bowls, drains and sumps sparkling clean Luxurious 2-ply tissue. Soft, snowy white, and highly
• A safe, non-chemical, nonpolluting product destroys absorbent. 396 sheets per roll, 4 rolls per pack.

odors on contact ORDER NO. PRICE
• Can also be used to clean sinks, showers and basins
THT 03300 $6.63
ORDER NO. SIZE PRICE
RAR 1PCP22 22 oz $15.29 RV/Marine Toilet Tissue

Rapid Dissolving Toilet Tissue Recommended for use in all freshwater RV and
Marine recirculating and portable toilets.
BIODEGRADABLE; MADE FOR MARINE HEADS • 1-ply tissue
SeaLand® 1-ply toilet tissue has the comfort and softness that • 350 sheets per roll – Four rolls per pack.
you’re used to at home, and its rapid disintegration keeps your • Specially-formulated, rapid-dissolving tissue.
entire system clog free. All natural and biodegradable, it contains • Soft and strong.
no dyes or perfumes. SeaLand tissue is perfect for use in your
boat, cabin, or home septic system. ORDER NO. PRICE
THT 20804 $6.43
4 Roll Pack, 12 - 4 packs/case
400 1-ply sheets ea. SANX/TDX Treatment Chemical

Specially formulated to operate in the SanX®

and TDX treatment devices. Four one-gallon

bottles per case.

ORDER NO. PRICE ORDER NO. PRICE
SLN 379441204 $5.07 SLN 373348666 $37.70

Toilet Bowl & Seal Cleaner Toilet Repair Kit

Remove tough grime from toilets in two minutes with the TOILET REPAIR KITS
powerful cleaning action of SeaLand Toilet Bowl & Seal ORDER NO. PRICE
Cleaner. It’s formulated to dissolve mineral deposits that GRC HFMASTER $131.00
can build up over time, especially between the flush ball
and bowl seal on many marine and RV toilets which can
result in slow leaks if not periodically cleaned.
• Thick formula stays under rim; requires 20% less than

other cleaners
• Fresh mint scent
• Non-toxic, biodegradable

ORDER NO. SIZE PRICE
SLN 379721601 26 oz. $9.45

668 HOSE AND TUBING

SHIELDSFLEX II Marine Shields Marine
Exhaust/Water Hose (no wire)
Water/Exhaust Hose
ORDER NO. I.D. O.D. PRICE 12-1/2 ft. lengths
(w/wire)
SLD 2000344 3/4 1-7/64 $131.75 Fuel Fill Hose - Series No. 355
• Engine Intake SLD 2001004 1 1-3/8 $152.29
• Wet Exhaust Connections – Use Where Bends SLD 2001144 1-1/4 1-45/64 $184.17 Shields Fuel Fill Hose resists gasoline/alcohol
SLD 2001124 1-1/2 1-15/16 $202.58 blends and is compounded for low permeation.
Or Long Lengths Required SLD 2001584 1-5/8 2-1/8 $210.38 It is abrasion resistant and it is reinforced
• Bilge Pump Intake/Discharge SLD 2001344 1-3/4 2-1/4 $219.58 with wire helix imbedded between piles of HD
• Scupper Lines SLD 2001784 1-7/8 2-5/16 $221.71 synthetic cord. This imported hose is primarily
• Toilet Intake, Discharge SLD 2002004 2 2-17/32 $228.79 used for fuel fill (gas or diesel) and is for
• Holding Tank Vent, Pump Out SLD 2002384 2-3/8 2-29/32 $323.00 pleasure boats only. It meets SAE J1527 Type
Black synthetic rubber tube and cover. Reinforced SLD 2002124 2-1/2 3-1/16 $357.71 A2 and ISO 7840 Type A2 NMMA/CE Type
with wire helix imbedded between plies of HD SLD 2002584 2-5/8 3-3/16 $350.63 Accepted standards.
synthetic cord. Resistant to: exhaust fumes, SLD 2002784 2-7/8 3-7/16 $352.78
ozone, mild chemicals, antifreeze, salt water. SLD 2003004 3 3-9/16 $381.79
Abrasion resistant. Odor permeation resistant. SLD 2003184 3-1/8 3-45/64 $395.83
Temperature range: SLD 2003124 3-1/2 4-3/32 $447.22
-20° to +200° F continuous, +250° intermittent SLD 2004004 4 4-9/16 $455.28
Meets SAE J2006 SLD 2005004 5 5-5/8 $738.89
Type R2 SLD 2006004 6 6-11/64 $922.22

12-1/2 ft. Lengths

Color coded bright blue stripe with size
and description marked

ORDER NO. I.D. O.D. PRICE

SLD 2500124 1/2 27/32 $140.96
SLD 2500584 5/8 1 $142.38

SLD 2500344 3/4 1-7/64 $144.50
SLD 2500784 7/8 1-7/32 $153.71
SLD 2501004 1 1-11/32 $156.54

SLD 2501184 1-1/8 1-15/32 $165.04 PRICE SHOWN IS PER LENGTH

SLD 2501144 1-1/4 1-5/8 $170.00 2 Ply up to 2-1/4 - Balance 4 Ply
Pack: 12-1/2 length-all sizes
SLD 2501384 1-3/8 1-47/64 $187.71
SLD 2501124 1-1/2 1-55/64 $195.50 ORDER NO. I.D. O.D. LENGTH PRICE
SLD 2501584 1-5/8 2 $206.13 SLD 3551120 1-1/2” 1-57/64” 50’ $838.89
SLD 2501344 1-3/4 2-1/8 $224.54 SLD 3551124 1-1/2” 1-57/64” 12-1/2’ $213.92
SLD 2501784 1-7/8 2-1/4 $228.79

SLD 2502004 2 2-13/32 $241.54

SLD 2502184 2-1/8 2-17/32 $249.33 Shields FIRE-ACOL™ Fuel Fill Hose 350 Series
SLD 2502144 2-1/4 2-11/16 $264.21
SLD 2502124 2-1/2 2-7/8 $318.04 Ethanol fuel can cause issues with today’s competitively priced neoprene cover fuel fill
SLD 2502384 2-3/8 2-3/4 $284.04 hose. It is designed as a fuel transfer hose and not designed to hold volatile ethanol fuels.
SLD 2502584 2-5/8 3-1/16 $329.17 Prolonged exposure can cause cover deterioration of the hose. Today’s EPA regulations for
new boats do not allow fuel to be stored in the fuel fill, however some older boats have fill
SLD 2502784 2-7/8 3-5/16 $367.63 systems that allow fuel to stay in the line after refueling.
SLD 2503004 3 3-7/16 $387.46 Shields Fire-Acol Fuel Fill Series 350 offers a solution to this problem. Fire-Acol uses a
SLD 2503184 3-1/8 3-45/64 $497.96 buna-n-vinyl cover that is very resistant to ethanol fuel. The hose will withstand exposure to
SLD 2503124 3-1/2 4 $538.33 fuel stored in the hose after refueling.
SLD 2504004 4 4-5/8 $587.21 Shields Fire - Acol - Fuel Fill Hose resists gasoline/alcohol blends and is compounded for low
permeation. It is abrasion resistant and it is reinforced with wire helix imbedded between plies
SLD 2505004 5 5-3/4 $718.96 of HD synthetic cord. Special compound resists cover deterioration due to alcohol fuel resting
in hose. This hose is primarily used for fuel fill (gas or diesel) and is for pleasure boats only.
SLD 2506004 6 6-21/32 $1,138.89 The temperature range is -5°F to 180°F. It meets SAE J1527 Type A2 and ISO 7840 Type A2
NMMA/CE Type Accepted standards.
PRICE SHOWN IS PER LENGTH.

NOTE: ALL above are 2 Ply
PACK: 12-1/2’ length-all sizes

50 ft. lengths

ORDER NO. SIZE PRICE ORDER NO. I.D. O.D. LENGTH PRICE

SLD 2500580 5/8” $558.33 SLD 3501120 1-1/2” 1-57/64” 50’ $1,130.55
SLD 2500340 3/4” $566.67 SLD 3501124 1-1/2” 1-57/64” 12-1/2’ $300.00
SLD 2501000 1” $613.89 SLD 3501584 1-5/8” 2-3/64” 12-1/2’ $442.72
SLD 2501140 1 1/4” $666.67 SLD 3501784 1-7/8” 2-9/32” 12-1/2’ $375.21
SLD 2502000 2” $947.22 SLD 3502004 2” 2-31/64” 12-1/2’ $387.42
SLD 3502384 2-3/8” 2-27/32” 12-1/2’ $449.78
PRICE SHOWN IS PER ROLL.

HOSE AND TUBING 669

Premium Marine Fuel Fill Hose Rubber Exhaust Hose

SAE J1527 (1-93) USCG & ISO 7840 Type A2-CE #327 Thick wall with Thanks to increased spiral reinforcement and a
smooth tube and cover, and wire helix between 2 ply more supple type of rubber, VETUS exhaust hoses
reinforcement for excellent flexibility and bend radius. Resists are now even stronger, as well as more flexible.
permeation, fire, heat, cold, ozone and premature aging by all marine VETUS exhaust hoses meet the requirements of
fuels including alcohol blends. Exceeds Newest Type A2 (USCG, SAE, the SAE J2006 R2 standard. They are temperature
ISO, ABYC) Std. NMMA Type Accepted, CE certified. Lloyds Register resistant between -22º and + 212º F, with brief peak
Type Approved. Black temperatures of 239º F.
w/Red Stripe. 11 Foot lengths. (longer lengths available up to 33’)
5 YEAR WARRANTY

ORDER NO. I.D. O.D. MAX BENDING PRICE
PRESSURE RADIUS

VET SLANG40 1-9/16” 1.9” 58 lbs. 2.4” $154.00

ORDER NO. I.D. LENGTH PRICE VET SLANG50 2” 2.3” 58 lbs. 3.3” $176.00
TRD 3271124 1-1/2” 12-1/2 ft. $246.56
TRD 3271126 1-1/2” $986.11 VET SLANG75 3” 3.3” 48 lbs. 4.5” $253.00
50 ft.
VET SLANG100 4” 4.3” 29 lbs. 6.2” $294.25

Flex Marine Wet Exhaust/Water Hose Marine Fuel Hose

(SAE J2006) #100-250 Trident Low Permeation Type B1-15 O/B Marine Fuel Hose Trident Barrier
Lined B1-15 Fuel Hose for both gasoline (petrol) and diesel (including
As a Water Hose these heavy wall, 2 ply rubber hoses circulate ethanol blends up to E85). Exceeds ABYC H-24, SAE J1527, ISO 8469
engine coolant water, and are resistant to kinking, heat, antifreeze, B1, & USCG Type B1-15; CARB and EPA low permeation; and is NMMA
ozone, etc. A premium wet exhaust hose for longer bent connections. Type Accepted & CE certified. Built with best fuel and age resistant
In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & formulation, 2 spiral reinforcement and unique “Barrier Liner” on inside
sanitation uses. Extra heavy tube and cover with helix between 2 ply surface of tube so fuel is not in direct contact with rubber. Provides
reinforcement provides excellent flexibility and bend radius. Resists extraordinary resistance to fuel permeation and aging, as well as heat,
heat, ozone, exhaust, sani chemicals, panting and collapse. Exceeds cold, and ozone. Also good bend-ability.
New (SAE J2006, ABYC and NMMA) Stds. Black High Temp EDPM
Rubber 250°F (121°C).
12-1/2 ft. lengths
5 YEAR WARRANTY

ORDER NO. I.D. PRICE ORDER NO. SIZE PRICE
TRD 1000124 1/2 $154.17 TRD 3050566 5/16” $227.78
TRD 1000584 5/8 $161.11 TRD 3050386 3/8” $241.67
TRD 1000344 3/4 $175.72
TRD 1000784 7/8 $182.67 “Barrier Lined” Type A1-15
TRD 1001004 1 $191.00 Marine Fuel Hose #365
TRD 1001144 1-1/4 $216.67
TRD 2501124 1-1/2 $234.72 Trident Barrier Lined A1-15 Fuel Hose (Distribution, Return, Vent,
TRD 2501584 1-5/8 $254.17 and Transfer) for both gasoline (petrol) and diesel (including alcohol
TRD 2501344 1-3/4 $270.17 blends). Exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, &
TRD 2501784 1-7/8 $278.50 USCG Type A1; and is NMMA Type Accepted & CE certified. It is also
TRD 2502004 2 $307.67 compliant with CARB Regulations. Built with best fuel, fire and age
TRD 2502124 2-1/2 $431.28 resistant formulation, 2 spiral reinforcement and unique “Barrier Liner”
TRD 2503004 3 $525.72 on inside surface of tube so fuel is not in direct contact with rubber.
TRD 2504004 4 $726.39 Provides extraordinary resistance to fuel permeation and aging, as well
TRD 2505004 5 $992.38 as fire, heat, cold, and ozone. Also good Bend-ability.
TRD 2506004 6 $1,351.39 50 ft. lengths

Silicone Marine Wet Exhaust 5 YEAR WARRANTY

100% Silicone ORDER NO. I.D. BURST PRESSURE PRICE
Ultimate quality Silicone Marine Exhaust & Water TRD 3650146 1/4 400 $255.56
hose. #202V Blue Very Hi Temp. (4 ply polyester reinforcement 350˚F) TRD 3650566 5/16 400 $275.00
dramatically exceeds all standards and lasts up to 6 times longer than TRD 3650386 3/8 400 $280.56
black rubber. TRD 3650126 1/2 400 $361.11
Sold in 3 ft lengths TRD 3650586 5/8 200 $402.78
(SAE J2006, ABYC and NMMA). 10 YEAR WARRANTY

ORDER NO. SIZE PRICE

TRD 202V300036 3” $179.72
TRD 202V400036 4” $217.76
TRD 202V500036 5” $292.05
TRD 202V600036 6” $334.61

670 HOSE AND TUBING

Fuel Feed Low Permeation Marine Fuel Hose Shieldsaust-C

Low permeation marine fuel hose has a plastic barrier veneer with an Use for longer connections which require a very substantial
NBR outer layer tube to limit permeation. This polyester reinforced hose bend on marine wet exhaust systems. Meets or exceeds
complies with EPA and CARB very low permeation requirements and is USCG and ABYC requirements for type certified wet exhaust
weather/UV resistant. This hose is primarily used for fuel feed (gasoline service.
up to 85% ethanol blended fuels/diesel/all bio-diesel blends). It meets
USCG Type A1 – 15 requirements for pleasure boats and meets SAE
J1527 Type A1-15, ISO 7840 Type A1, and NMMA/CE type accepted
standards. The temperature ranges from -20°F to 212°F.

ORDER NO. I.D. O.D. PRICE ORDER NO. I.D. O.D. PRICE PRICE SHOWN IS PER LENGTH.
SLD 3680146 1/4” 0.54 $238.89 SLD 2520344 3/4” 1-1/8” $166.46 2 ply pack: 12-1/2 ft. lengths
SLD 3680566 5/16” 0.61 $252.22 SLD 2521004 1” 1-3/4” $179.92
SLD 3680386 3/8” 0.68 $259.17 SLD 2521144 1-1/4” 39/64” $220.29
SLD 3680126 1/2” 0.82 $344.44 SLD 2521124 1-1/2” 1-15/16” $293.25
SLD 2522004 2” 2-7/16” $313.08
SLD 2523004 3” 3-7/16” $456.88
SLD 2524004 4” 4-9/16” $602.79

Shields Nautiflex Corrugated Shields Fire-Acol Fuel Vent Hose

Silicone Exhaust Hose - Blue Shields Fire-Acol Fuel Vent Hose resists gasoline/alcohol blended
fuel and is fire resistant. It has a weather/UV resistant NBR/PVC
• Main Engine Exhaust cover and the temperature ranges from –20°F to 160°F. This hose
• Generator Exhaust is primarily used for fuel vent lines (gasoline up to 85% ethanol
• Engine Coolant Circulation blended fuel, diesel fuel).
• Engine Intake • Meets USCG Type A2 Requirements
• Generator Intake • Meets SAE J1527 Type A2
Blue silicone tube and cover with smooth finish for easy clean • NMMA/CE type accepted
up. Wire reinforced - will not collapse under suction or in a
bend. Corrugated cover - easy to bend for easy installation Two ORDER NO. I.D. O.D. PRICE
ply construction - wire captured between fabric plies. Stable at SLD 3690586 5/8” 0.96” $347.22
elevated temperatures.
Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze,

salt water
Temperature range: -20° to +350° F
Meets SAE J2006 Type R2

ORDER NO. DESCRIPTION O.D. MIN. BURST PRICE Clear White PVC Tubing –
PRESSURE Nylon Reinforced (Blue-Tracer)
$338.30
$373.66 Wash down, fresh water circulation, pressurized water systems (burst
$421.60 pressure 250 lbs.), hot or cold, vent and drain lines and bilge pump
$579.70 discharge. Made of FDA approved compound, non-toxic, tasteless,
$674.90 odorless. Nylon braid reinforcement.
$785.40
SLD 2620344 3/4” 1.187” 350 $965.60
SLD 2621004 $1,405.90
1” 1.421” 280

SLD 2621144 1-1/4” 1.703” 250

SLD 2621124 1-1/2” 2.0” 210

SLD 2622004 2” 2.531” 165 ORDER NO. I.D. O.D. BRAID BURST PRESSURE PRICE

SLD 2622124 2-1/2” 3.046” 110 SLD 1640126 1/2” 11/16” 1 250 lbs. $137.50

SLD 2623004 3” 3.546” 110 SLD 1640586 5/8” 13/16” 1 250 lbs. $152.78

SLD 2624004 4” 4.765” 80 SLD 1640346 3/4” 15/16” 1 250 lbs. $184.45

12-1/2 ft. lengths Pack: 50’ punchout carton. Priced per roll.

HOSE AND TUBING 671

Water Hose, PVC- FDA Silverado 4000 Fuel Line –
Series No. 337
Nylon reinforced. FDA compound PVC for pressurized drinking water
systems, ect. No taste or odor. Max W.P. depending on I.D size @ Silverado 4000 fuel line is constructed with a non-
70ºF (21º C) permeable THV barrier layer, polyester reinforcement, and a
175 PSI Operating temperatures +20º to +150º F CPE weather and UV resistant cover. It meets all current EPA
NOT RECOMMENDED FOR BELOW WATERLINE THRU-HULL and CARB standards. The hose construction is easier to rig,
CONNECTIONS. clamp and maintains its flexibility under a range of extreme
Color: Clear with Blue & Red Tracer environmental conditions.
Sold in 50 ft. cartons. Price per roll. The THV 500 barrier layer is designed for excellent flexibility
2 year warranty. and permeation resistance. The polyester reinforcement adds
strength to the hose. CPE cover is excellent for UV resistance
ORDER NO. DESCRIPTION PRICE and the gray color keeps the hose cooler to help prevent vapor
TRD 1620126 1/2” $102.78 lock.
TRD 1620586 5/8” $155.57 • Extremely low permeation
TRD 1620346 3/4” $186.11 • EPA/CARB certified outboard fuel line
• For use in above deck primer bulb assemblies
Outboard Fuel Hose • Can be used for small diesel feed line
• Resistant to ethanol blend fuels
Premium quality fuel hose, designed for outboard feed • Meets SAE J1527 Type B1-15
and vent lines. Remains flexible at low temperatures and
resists UV sunlight. Silverado 2000 complies with SAE J1527 Type B2 50’ per carton
specifications. Should not be used in applications requiring use of Type
B1 fuel feed line. ORDER NO. I.D. O.D. PRICE
SLD 3370566 5/16” $238.89
SLD 3370386 3/8” $247.22

All Clear PVC Tubing

Nylon Reinforced (Red-Tracer)

ORDER NO. I.D. O.D. LB. BURST PRICE
SLD 3150586 PRESSURE $301.39

5/8” 29/32” 175 lbs. Heavy duty for hot or cold pressurized water systems
(burst pressure 250 lbs.). Vent and drain lines, bilge pump
PRICE SHOWN IS PER ROLL. discharge.
50’ per carton
Heavy walled FDA approved
Shields Heater Hose vinyl compound, non-toxic,
tasteless, odorless. Nylon
braid reinforcement.

ORDER NO. I.D. O.D. BRAID BURST PRICE
PRESSURE
$140.28
SLD 1620126 1/2” 23/32” 1 250 lbs. $158.33
$186.39
SLD 1620586 5/8” 27/32” 1 250 lbs. $265.28

Meets SAE 20R3 CLASS R SLD 1620346 3/4” 31/32” 1 250 lbs.
Sink, icebox, shower, bait box drain Line, engine water, bilge pump and
air conditioner circulation. SLD 1621006 1” 1 5/16 1 250 lbs.
EPDM tube and cover, good body and bend radius, reinforced with
2 spirals of polyester yarn. Resistant to heat, cold, ozone, and saltwater. Pack: 50’ punchout carton. Priced per roll.
Pack: 50’

BURST PVC Tubing — Clear
ORDER NO. I.D. O.D.
PRICE Drain lines, sink, ice boxes, refrigerators, live box, bilge pump
PRESSURE discharge, fresh water lines, water and holding tank vent.
SLD 1300126 1/2 13/16 400 lbs. $148.61 Not recommended for hot water.
SLD 1300586 5/8 28/32 350 lbs. $163.89 Single layer vinyl, non-toxic, made of FDA approved compound.

SLD 1300346 3/4 1-1/32 275 lbs. $220.00

PRICE SHOWN IS PER ROLL

Shields Water Hose ORDER NO. I.D. WALL PRESSURE 70°F PRICE
SLD 1500146 1/4” 078 60 lbs. $65.84
Sink, icebox, shower, bait box drainline, engine water, bilge pump and air SLD 1500566 5/16” 093 55 lbs. $83.06
conditioner circulation. Pack: 50’ SLD 1500386 3/8” 094 55 lbs. $87.78
SLD 1500126 1/2” 110 45 lbs.
ORDER NO. I.D. O.D. WORKING PRICE SLD 1500586 5/8” 110 40 lbs. $122.22
PSI SLD 1500346 3/4” 110 35 lbs. $135.28
$355.55 SLD 1501006 1” 125 20 lbs. $163.61
SLD 1351006B 1 1.4 150 lbs. $187.50 $218.33

SLD 1350586B 5/8 15/16 200 lbs. PRICE SHOWN
IS PER ROLL.
PRICE SHOWN IS PER ROLL Pack: 50’ carton

672 HOSE AND TUBING Bilge Hose

Marine Products Extremely flexible and tough corrugated
Bilgeflex polyethylene hose for bilge intake and discharge.
Cuffed every foot for clamping. Resists oily bilge and sea water.
Discharge for electric bilge pumps, hand pumps, and live well aerators. NOT RECOMMENDED FOR BELOW WATERLINE THRU-HULL
Single layer corrugated polyethylene resists oily bilge acids and sea CONNECTIONS.
water. clamping cuff every foot. Operating temperatures -40º to +200ºF
Color: White
ORDER NO. I.D. COLOR BEND RADIUS PRICE Sold in 50 ft. cartons. Price per roll.
$81.39 1 year warranty.
$81.39
SLD 1200346W 3/4” White 3/4” $97.22 ORDER NO. DESCRIPTION PRICE
SLD 1200346B 3/4” Black 3/4” $97.22
SLD 1201186W 1-1/8” White 1”
SLD 1201186B 1-1/8” Black 1” $121.66
SLD 1201146W 1-1/4” White 1-1/2” $148.05

SLD 1201126W 1-1/2” White 2” TRD 1200346 3/4” $83.33

PRICE SHOWN IS PER ROLL. TRD 1201186 1-1/8” $95.67
Pack: 50’ punchout carton.
TRD 1201126 1-1/2” $161.11

Shields Multiflex Vac HD Bilge & Live Well

Extremely flexible hose with crystal clear vinyl tube. FDA Heavy duty bilge, drain and live well hose.
approved compounds. For potable water fill, sink, bilge pump. Clear see thru vinyl (FDA) corrugated with
shower, icebox and live well drains (above the water line). black hard PVC helix and smooth tube. Provides exceptional
(Not recommended for sanitation use or thru hull drains below the flexibility and bend radius. NOT RECOMMENDED FOR BELOW
water line.) WATER LINE THRU-HULL CONNECTIONS. No cuffs required.
Operating temps: +10º to +140º F
Color: Clear w/ Black
Sold in 50 ft. cartons. Price per roll.
2 year warranty

ORDER NO. I.D. BEND RADIUS PRICE Price shown is per roll. ORDER NO. DESCRIPTION PRICE
SLD 1410346B 3/4” 3/4” $169.45 Pack: 50’ carton TRD 1440346 3/4” $188.89
SLD 1411006B 1” 7/8”
SLD 1411186B 1-1/8” 1” $208.33
SLD 1411126B 1-1/2” 2”
$215.83
$269.45

BILGEFLEX Livewell/Bilge Hose

Poly-Pak Specially made hose designed expressly for critical live well
connections. Smooth-walled, all vinyl hose can be connected below the
A polyester bag containing 6 feet of water line. For live well intake and drain. Also excellent for bilge pump
pre-cut hose. discharge and drain lines. Priced per roll. Packed 50’ per carton.

ORDER NO. I.D. BEND VAC PRICE ORDER NO. I.D. BEND PRICE
SLD 1200341W 3/4” 3/4” 20 $15.56 RADIUS
SLD 1201181W 1-1/8” 1” 20 $16.39 SLD 1490346
SLD 1491186 3/4” 3” $180.56
Vinylvent 400/402
1-1/8” 4” $237.50
Venting of bilge gases and fumes.
PVC hose supported by helical wire. Resistant to ozone, sunlight and Bilgevac
weathering. Will not support a flame.
For live well aerators, bilge pumps, sink and shower
drains. Durable, flexible and abrasion resistant.
PVC hose supported by special flexible vinyl helix for easy clamping.
(Not recommended for potable water, sanitation or thru hull drains.)

Pack: 50’ ctn. POLY-PAC ORDER NO. I.D. BEND RADIUS PRICE PRICE SHOWN IS PER ROLL.
ORDER NO. I.D. O.D. PRICE Polyester Bag Containing 10 Feet of $173.61 Pack: 50’ Carton
SLD 4003000W 3” White 4-1/8” $61.11 SLD 1230346 3/4” 2”
SLD 4004000W 4” White 4-1/8” $66.67 Pre-Cut Vinylvent. $211.12
SLD 4023000 3” Black 3-1/8” $61.11 SLD 1231186 1-1/8” 3”
SLD 4024000 4” Black 4-1/8” $66.67 ORDER NO. SIZE PRICE

SLD 40030031 3” White $25.08

SLD 40230031 3” Black $25.08

SLD 40040031 4” White $24.73

HOSE AND TUBING 673

Trident Silicone & Rubber Wet Exhaust Elbows & Bellows

Silicone & Rubber Elbows & Hump Hose Bellows provide the ultimate flexible connectors for Marine Wet Exhaust Systems. They offer much greater
tolerance to heat, misalignment, engine movement, & vibration, with significant savings in cost, parts, labor and space. Each elbow and hump hose
comes with four stainless steel T-Bolt Clamps.

Molded Black Hi Temp: EPDM Rubber 250˚F Blue Very Hi Temp: Silicone Blend 350˚ F
Elbows Elbows

ORDER NO. ANGLE SIZE PRICE ORDER NO. ANGLE SIZE PRICE
3” $56.22
TRD TRL390SS 90˚ 4” $67.64 TRD 240V3000SS 45˚ 3” $117.27
5” $78.56 TRD 240V5000SS 45˚ 5” $144.89
TRD TRL490SS 90˚ 6” $85.91
3” $55.04
TRD TRL590SS 90˚ 4” $66.44
5” $74.38
TRD TRL690SS 90˚ 6” $75.79

TRD TRL345SS 45˚

TRD TRL445SS 45˚

TRD TRL545SS 45˚

TRD TRL645SS 45˚

Hump Hoses Black in color

ORDER NO. SIZE PRICE

TRD THH3SS 3” $54.44 Hump Hoses Blue in color

TRD THH4SS 4” $57.51

TRD THH5SS 5” $66.64 ORDER NO. SIZE PRICE
TRD 270V4000SS 4” $97.24
TRD THH6SS 6” $72.80 TRD 270V5000SS 5”
TRD 270V6000SS 6” $120.47
Glossy Blue Very Hi Temp: 100% Silicone 350˚F, Glossy Blue Cover, $138.18
4 ply reinforcement higher pressure resistance for coolant, turbocharger,
etc. applications.

Transom Exhaust Connections Hump Hoses SIZE PRICE
With Check Valve (Synthetic) 3” $108.29
For 2” Exhaust Hose ORDER NO. 5” $166.48
TRD 272V3000SS 6” $193.98
The exhaust hose can be fitted directly to TRD 272V5000SS 8” $321.01
this transom connection. TRD 272V6000SS
TRD 272V8000SS
ORDER NO. PRICE

VET TRC50PV $50.50

Exhaust Protector Valves Anti Syphon Airvents with Valve

Specially compounded rubber flapper valves If the point where the cooling water is injected
designed to prevent water from entering the exhaust into the exhaust is less than 6” above the waterline, then when the
system in following seas or when backing down. Made with weather engine is stopped, there is a risk that cooling water will siphon into the
resistant EPDM with U/V stabilizer. exhaust system and subsequently into the engine itself. Such siphoning
may be prevented by fitting a VETUS air vent at least 16” above the
ORDER NO. SIZE REPLACES PRICE waterline.
MERCURY Type ASD
SIE 184456 3” $28.48 Air vent suitable hoses with internal diameters of
SIE 184457 4” 34765A1 $31.27 1⁄2”, 3⁄4”, 1” & 11⁄4”.
SIE 184458 5” & 6” $54.81 Interchangeable with type AIRVENT and has the
12644A1 same fixing hole centres. It has the advantage
N/A that the air bleed connection rotates through 360º.
In addition, the valve can be maintained without
Stainless Transom Exhaust removing the vent from the wall and no tools are
required to do this.
Connection with Check Valve 2”

Transom exhaust connection, with integrated check

valve. High quality stainless steel AISI 316 with high

gloss polished cover to conceal fixings. The exhaust

ORDER NO. PRICE hose can be fitted directly to ORDER NO. PRICE
this transom connection. VET ASDV $79.75
VET TRC50SV $95.50

Fiberglass Marine Exhaust Tube Connectors Type AIRVENT

For joining flexible (rubber and/or silicone) wet exhaust Type V has a reliable antisiphon pressure valve
components. and is self contained. However, it requires periodic
Fire resistant, Marine UL Listed, ABS Type approved. maintenance to prevent clogging with salt crystals.
#260 is 250˚F Max continuous. 5 year warranty Can be connected to hoses with internal diameters of
1⁄2”, 3⁄4”, 1” & 11⁄4”.
ORDER NO. SIZE O.D. LENGTH PRICE
TRD 2603001 3” 4” $13.71 ORDER NO. PRICE
TRD 2604001 4” 6” $22.64 VET AIRVENTV $79.75
TRD 2605001 5” 6” $30.33
TRD 2606001 6” 6” $38.11
TRD 2608001 8” 8” $83.33

674 HOSE AND TUBING

Hose Clamps Exhaust Hose Clamps T-bolt
Band Clamps
All 300 Series Stainless Steel
Clamps are 18-8 stainless steel, with
This super quality 300 series band and housing is matched with a 300 series 1/4” hardware, .025”T x.75” W band. (2)
5/16” deep slotted hex head screw. This I.A.P.M.O. approved clamp is highly Nylon insert lock nut assures safety. Extra
corrosion resistant, well suited for marine applications and is low in magnetic long T-Bolt allows maximum adjustment.
permeability. Pack 10 per box. (Not available at all locations.) Torque to 75” pounds
maximum. T-Bolt clamps are
CLAMP RANGE FITS I.D. designed to fit all Shields
ORDER NO. 3/16” HOSE PRICE mandrel built hose. Series
100, 110, 200, 210,
MIN MAX WALL 250 and 252.

DUP B6HSP 3/8” 7/8” 1/4” 3/8” $2.19

DUP B8HSP 7/16” 1” 5/16” 1/2” $2.36

DUP B10HSP 9/16” 1-1/16” 3/8” 5/8” $2.42

DUP B12HSP 9/16” 1-1/4” 5/8” 3/4” $2.57

DUP B16HSP 11/16” 1-1/2” 3/4” 1” $2.81 ORDER NO. CLAMP RANGE PRICE
BUC 7202000
DUP B20HSP 3/4” 1-3/4” 1” 1-1/4” $2.89 BUC 7202120 2.326”-2.622” $7.33
BUC 7203000
DUP B24HSP 1-1/16” 2” 1-1/4” 1-1/2” $2.96 BUC 7203120 2.886-3.182 $7.49
BUC 7204000
DUP B28HSP 1-5/16” 2-1/4” 1-1/4” 1-3/4” $3.04 BUC 7205000 3.37-3.94 $10.40
BUC 7206000
DUP B32HSP 1-9/16” 2-1/2” 1-1/2” 2” $3.12 BUC 7208000 3.87-4.44 $10.47

DUP B36HSP 1-13/16” 2-3/4” 1-3/4” 2-1/4” $3.20 4.37-4.94 $10.72

DUP B40HSP 2-1/16” 3” 2” 2-1/2” $3.51 5.37-5.94 $10.79

CLAMP RANGE FITS I.D. 6.30-6.87 $13.64
3/16” HOSE PRICE
ORDER NO. 8.30-8.87 $12.03
DUP B44HSP MIN MAX WALL

2-5/16” 3-1/4” 2-1/4” 2-3/4” $3.59

DUP B48HSP 2-9/16” 3-1/2” 2-1/2” 3” $3.74

DUP B52HSP 2-13/16” 3-3/4” 3” 3-1/4” $3.90 Oetiker® Stepless®

DUP B56HSP 3-1/16” 4” 3-1/4” 3-1/2” $4.06 Ear Hose Clamps

DUP B60HSP 3-5/16” 4-1/4” 3-1/2” 3-3/4” $4.06 • Forms a Full 360 Degree Circle
• Tongue and Groove Interlock Design
DUP B64HSP 3-9/16” 4-1/2” 3-1/2” 4” $4.13 • Fast Clamping with Tool
• No Leaks Around Hose
DUP B72HSP 4-1/16” 5” 3-1/2” 4-1/2” $4.52 • Stainless Steel
• 100 ea. per Bag
DUP B80HSP 4-5/8” 5-1/2” 4” 5” $4.84

DUP B88HSP 4-3/32” 6” 4” 5-1/2” $5.77

DUP B96HSP 4-1/2” 6-1/2” 4-1/2” 6” $5.93

DUP B104HSP 5” 7” 5” 6-1/2” $6.55

DUP B116HSP 5-3/4” 7-3/4” $7.88

Micro Seal® – Miniature Hose Clamps

300 series stainless steel

ORDER NO. DESC. SIZE PRICE
THM 16700001 $85.26
THM 16700004 7R 9/32” $85.26
THM 16700006 $85.26
THM 16700007 95R 3/8” $85.86
THM 16700010 $85.86
ORDER NO. CLAMP RANGE FTS I.D. HOSE 3/16” WALL PRICE THM 16700011 105R 13/32” $85.89
DUP M4HSP 7/32”-5/8” 3/16” 5/16” $1.64 THM 16700012 $88.95
DUP M6HSP 5/16”-7/8” 1/4” 3/8” $1.73 Pack 10 per box. THM 16700013 113R 7/16” $88.95
DUP M8S 7/16”-1” 5/16” 1/2” $1.73 THM 16700016 $88.95
DUP M10S 1/2”-1-1/16” 3/8”-5/8” $2.19 THM 16700017 133R 1/2” $88.96
THM 16700020
THM 16700024 138R 35/64” $104.30
THM 16700031 $104.30
THM 16700037 14R 9/16” $109.21
THM 16700040 $109.58
THM 16705000 145R 37/64” $123.30
THM 16705989 $125.77
157R 5/8” $153.36
THM 18500000
17R 11/16” $226.84

185R 3/4”

21R 27/32”

256R 1”

Installation Tools 301R 1-1/8”

316R 1-1/4”

381R 1-1/2”

ORDER NO. DESCRIPTION PRICE 41R 1-5/8”
SIE 189141 Standard Jaw $44.20
SIE 1879823 $71.67 Kit (10 ea. of 15
Side Jaw popular sizes)

HOSE AND TUBING 675

Torro 304 Stainless Steel Clamps Ideal Hose Clamps

TORRO 304 STAINLESS STEEL clamps offer several advantages over traditional “63” Series Marine,
perforated-band worm-gear style clamps: TORRO clamps are crafted entirely of AISI 304 all “300” stainless
Stainless Steel, rather than a composite of lesser alloys; TORRO clamps have rolled-up steel hose clamps.
band edges and solid bands, reducing the possibility of hose damage; the solid band of the Shouldered 5/16” hex
TORRO clamps eliminates cracks starting at perforations, extending the service life of the head slotted screw.
clamps when compared to perforated-band clamps. Pack 10 per box.
• Narrow Solid Band Allows Double Clamping
• Allows Compliance With USCG/ABYC Requirements
• Band width: 9 MM (3/8”)

ORDER NO. SAE MM CLAMP RANGE PRICE ORDER NO. CLAMP RANGE PRICE
SIZE SIZE
AWB NT09012W4 MIN MAX $1.37 IDL 630040006 MIN. MAX. $3.90
AWB NT09016W4 0 8-12 $1.38 IDL 630040008 $3.90
AWB NT09020W4 2 8-16 5/16” 1/2” $1.39 IDL 630040010 3/8” 7/8” $3.90
AWB NT09022W4 5 12-20 $1.40 IDL 630040012 $4.07
AWB NT09025W4 6 12-22 5/16” 5/8” $1.67 IDL 630040016 7/16” 1” $4.07
AWB NT09027W4 8 16-25 $1.73 IDL 630040020 $4.21
AWB NT09032W4 9 16-27 1/2” 13/16 “ $1.75 IDL 630040024 1/2” 1-1/8” $4.21
AWB NT09035W4 12 20-32 $1.77 IDL 630040028 $4.27
AWB NT09040W4 14 23-35 1/2” 7/8” $1.79 IDL 630040032 1/2” 1-1/4” $4.27
AWB NT09045W4 17 25-40 $1.80 IDL 630040036 $4.42
20 30-45 5/8” 1” IDL 630040040 3/4” 1-1/2” $4.75
IDL 630040044 $5.31
5/8” 1-1/16” IDL 630040048 3/4” 1-3/4” $5.31
IDL 630040052 $5.63
13/16” 1-1/4” IDL 630040056 1” 2” $5.63
IDL 630040064 $6.38
7/8” 1-3/8” IDL 630040072 1-5/16” 2-1/4” $6.43
IDL 630040080 $6.79
1” 1-9/16” IDL 630040088 1-9/16” 2-1/2” $7.02
IDL 630040096 $7.66
1-3/16” 1-3/4” IDL 630040104 7/8” 2-3/4” $7.74
IDL 62604 $2.25
IDL 62606 1-1/8” 3” $2.25

1-5/16” 3-1/4”

1-5/8” 3-1/2”

1-7/8” 3-3/4”

Hose Clamps – 316 Stainless Steel 2-1/8” 4”

AWAB Hose Clamps feature a smooth inside 2-5/8” 4-1/2”
band with rolled band edges to eliminate the
risk of damage to the hose while also providing 3-1/8” 5”
superior clamping force. Pack 10 per box.
3-5/8” 5-1/2”

5-1/4” 6”

4-3/4” 6-1/2”

SAE MM CLAMP RANGE 4” 7”
SIZE SIZE
ORDER NO. MIN MAX PRICE 1/4” 5/8”
3 8-14 5/16” 9/16” $4.05
AWB 319014B 5/16” 7/8”
AWB 319017
AWB 319020 4 11-17 7/16” 11/16” $4.11
AWB 316024 6 13-20 1/2” 13/16” $4.37
AWB 316028
AWB 316032 8 15-24 5/8” 15/16” $4.30 Flexible Hose Clamp Driver
AWB 316038
AWB 316044 10 19-28 3/4” 1-1/8” $4.58 Hose Clamp Tail Tips Flexible shaft up to 90 degrees. Extra grip on handle.
AWB 316050 Reversible 1⁄4” and 5⁄16” hex drive socket to fit mini
AWB 316057 12 22-32 7/8” 1-1/4” $4.60 Soft red vinyl tail tips dress and standard size hose clamps.
AWB 316064 your job up, while at the same
AWB 316070 16 26-38 1-1/16” 1-1/2” $4.82 time making those unsightly
AWB 316076 scars just a bad memory.
AWB 316083 20 32-44 1-1/4” 1-3/4” $5.00 They will fit on 1/2” band
AWB 316089 clamps from those other guys
AWB 316095 24 38-50 1-1/2” 2” $5.24 as well. Packed 100 per box.
AWB 316102
AWB 316108 28 32-57 1-1/4” 2-1/4” $5.27 ORDER NO. PRICE
AWB 316114 AWB 125015 $36.50
AWB 316127 32 38-64 1-1/2” 2-1/2” $6.09 ORDER NO. PRICE
AWB 316140
AWB 316152 36 44-70 1-3/4” 2-3/4” $6.17 IDL 9999V $11.59
AWB 316165
AWB 316178 40 51-76 2” 3” $6.57
AWB 316191
44 57-83 2-1/4” 3-1/4” $6.97

48 64-89 2-1/2” 3-1/2” $7.13

52 70-95 2-3/4” 3-3/4” $7.22 Flexible Clamp-Driver

56 76-102 3” 4” $7.45 This clamp-driver with hexagon socket and flexible
shaft, will facilitate the fitting of our hose clamps in
60 83-108 3-1/4” 4-1/4” $7.72 positions as difficult as 90°. 7mm fits Awab clamps.

64 89-114 3-1/2” 4-1/2” $8.55

72 89-127 3-1/2” 5” $8.72
80 102-140 4” 5-1/2” $9.35

88 114-152 4-1/2” 6” $9.52

96 127-165 5” 6-1/2” $10.99

104 140-178 5-1/2” 7” $11.91 ORDER NO. DESCRIPTION PRICE
AWB 125010 7mm – 9/32 $28.60
112 152-191 6” 7-1/2” $12.42

676 HOSE AND TUBING

Hose Adapter Fiberglass Marine Wet Exhaust Tubing

Synthetic hose pillars - ideal for Tough and durable VERNATUBE is made by winding resin-impregnated
securely joining two dissimilar ID fiberglass rovings onto a rotating mandrel in a predetermined pattern. The
hoses. Simply cut to size. result is near-maximum hoop and longitudinal strengths, provided by the
orientation of the glass fibers with respect to the final product’s geometry.
ORDER NO. DIAMETER PRICE Through the use of synergistic fillers and the highest rated fire-retardant
VET HA1338 ½” to 1-½” $20.00 resins available on the market. VERNATUBE’s fire ratings are far better
VET HA3060 1-¼” to 2-¼” $28.50 than the values required for self-extinguishing ratings (ASTM-D-365).
Standard Length 10’.
Wet Marine
U. L. Rating.
Exhaust Elbows MARINE WET
EXHAUST TUBING
When used properly in wet marine exhaust environments, these LISTED 699A.
exhaust elbows will not rust or corrode. They are also easy to install
and allow change of direction in limited spaces where the exhaust
hose might buckle and restrict flow.

ORDER NO. A B PRICE ORDER NO. NOMINAL NOMINAL PRICE PER
CNT 1200200 2.00” 5.75” $55.98 O.D. THICKNESS LENGTH
CNT 1200195 2.50” 6.38” $64.71 CNT 1100512
CNT 1200171 3.00” 7.50” $76.83 CNT 1100501 2.00” .125” $179.03
CNT 1200189 3.50” 9.00” $91.97 CNT 1100502
CNT 1200157 4.00” 9.38” $119.17 CNT 1100504
CNT 1200175 5.00” 12.25” $154.59 CNT 1100506
CNT 1200162 6.00” 14.00” $199.64 CNT 1100507
CNT 1100508
2.50” .128” $182.13

Couplings 3.00” .130” $191.38

ORDER NO. A1 A2 B PRICE 4.00” .138” $225.33
CNT 1200270 2.50” 3.00” 8.50” $40.84
CNT 1200170 3.00” 4.00” 10.00” $52.94 5.00” .144” $287.06

6.00” .148” $370.41

8.00” .154” $638.93

Exhaust “Y” Tyton Fuel Line Clamp Ties

ORDER NO. A B C PRICE The clamp tie has triangular shaped tabs extending beneath the head,
CNT 1200256 3.00” 4.00” 12.00” $212.35 allowing for optimal surface contact and complete circumferential
CNT 1200316 4.00” 4.00” 16.50” $233.52 compression to 360 degrees. The clamps are recommended for soft
rubber hose applications, as well as for fuel, water, and air vacuum
lines. Black.

45˚ Elbows

ORDER NO. SIZE CTN. PRICE
$213.35
ORDER NO. NOM. O.D. B PRICE TYT CTT20ROHSM4 4’’ Blk 1000
CNT 1200192 2.00” 6.75” $43.87 $26.78
CNT 1200109 3.00” 8.50” $55.98 TYT CTT20ROC2 4’’ Blk 100 $290.80
CNT 1200111 3.50” 10.25” $64.13
CNT 1200112 4.00” 10.25” $70.79 TYT CTT60ROHSM4 8’’ Blk 1000 $44.68
CNT 1200113 5.00” 13.63”
CNT 1200114 6.00” 15.38” $101.63 TYT CTT60ROC2 8’’ Blk 100
$144.01

Vernatone™ Muffler MUFFLERS 677

Well-known VERNATONE Muffler is accepted by many of the Waterlock LP50 2” With Rotating Inlet
nation’s foremost boat manufacturers as standard equipment.
As an all-fiberglass marine muffler, it outperforms the best For exhaust hose with internal diameters of 2” I.D. Provided with a plug for
metal muffler available at one-half to two-thirds of the cost. draining during winter time. The inlet connection will revolve through 360º,
Carefully engineered to minimize back pressure, VERNATONE which greatly facilitates the installation of the exhaust assembly. Collects
offers excellent exhaust quieting. VERNATONE Mufflers the cooling water present in the system when
will not rust, corrode or deteriorate from contact with the engine is stopped. In addition, a Vetus
exhaust gases and with fresh or salt water. It is resistant to Waterlock acts as a very efficient muffler with
temperatures encountered in water-cooled exhaust systems, great sound-deadening capabilities. The size
and the all-fiberglass design eliminates electrolysis. Noxious of the water lock is not only determined by the
fumes and odors are also drastically reduced. diameter of the exhaust hose, but also by the
quantity of water that must be collected.
Capacity: 1.05 Gal.

ORDER NO. PRICE
VET WLOCKL50R $175.00

ORDER NO. A B C D PRICE Waterlock Muffler
CNT 1000103 2.50” 5.58” 21.62” 3.00” $208.11
CNT 1000104 3.00” 7.07” 25.84” 3.50” $226.27 Suitable for exhaust hose
CNT 1000106 4.00” 9.06” 33.69” 3.50” $355.10 with inside diameter of 2”
CNT 1000111 6.00” 12.12” 41.50” 5.00” $721.30 The NLP Waterlocks are of dual stage construction, featuring upper and
lower chambers with a horizontal partition plate and a riser tube through the
centre. Compared with single stage Waterlocks using only one chamber,
these NLP Waterlocks offer superior silencing of exhaust noise with
minimal back pressure. Since the top chamber may be rotated through 360º
and both the inlet and the outlet
connectors can rotate through 360º,
installation of the exhaust assembly
even in confined engine spaces is
greatly simplified.
Provided with drain plugs (for winter
storage). Straps to secure the
Waterlock to the boat are supplied
as standard.
Capacity: 1.2 Gal.

ORDER NO. PRICE

VET NLP50 $257.50

Vernalift™ Exhaust Muffler Side In - Top Out

The Vernalift exceeds ABYC specifications.
Vernalift’s strengthened design means it can
withstand internal pressures far higher than
any competitive muffler of non-corrosive
materials. The Vernalift provides the
following features:
• Strength
• Safety
• Reduced exhaust noise
• Suitable for gas or diesel
• Compact
• Suitable for propulsion or generator set

Top In - Top Out ORDER NO. A B C PRICE
Inlet/Outlet Height Base
ORDER NO. A B C PRICE CNT 1500071 8.00” 9.00” sq. $213.55
Inlet/Outlet Height Base CNT 1500020 1.50” 8.00” 9.00” sq. $214.47
CNT 1500060 8.00” 9.00” $207.22 CNT 1500024 1.63” 8.00” 9.00” sq. $217.47
CNT 1500009 1.50” 8.00” 9.00” $213.55 CNT 1500026 1.88” 8.00” 9.00” sq. $220.53
2.00” CNT 1500027 2.00” 10.13” 10.50” sq. $239.27
CNT 1500034 2.00” 10.16” 10.50” sq. $257.70
3.00”

678 Dock HarDware a outside corner (Female) - Has two 1/2” welded
tabs. Use with a male outside corner. Each leg is
Galvanized Structural Steel Dock System Hardware 10” L X 5” H.
Standard - 8 Gauge
commercial - 1/4” B outside corner (Male) - has one 1/2”
welded tab. Use with a female outside corner
to connect docks end to end. Joint requires 3/4” bolt
set (N) or connector pin (O). Each leg is
10” L X 5” H.

c outside corner end - use this corner at ends
of fingers and docks. Ideal for swim floats and ski
jump corners. Each leg is 10”.

D Inside corner - this heavy-duty inside
corner should be used with one of the outside
corners. Each leg has elongated holes for
easy fit-up and is 8-1/4” L X 5” H.

e angle - use this heavy duty angle for all J Pipe Holder - Outside 3” - bolts to outside N connector Pin Set - for quick disconnect.
cross supports. Each leg measures 2-1/2” L X of dock. Carriage bolt set (M) required for Used to connect male and female connectors.
5” H. attaching. Use 2” pipe to hold dock in place. Galvanized 3/4” connector pin and hitch
clip pin.
F Female T connector - has two welded 1/2” k Lag Bolt Set - bolt and flat washer hot
tabs. Bolts to side of dock to attach fingers and dipped galvanized used to attach flotation Tie Down Dock Hardware is designed for
ramps. 5”L X 5” H. drums to dock system. use with 1 1/2” thick lumber (minimum width
3/8” x 3” 6”). All hardware is mounted with 3/8” carriage
G Male T connector - has one welded 1/2” bolts (M). All male and female dock to dock
tab. Use with female T connector to attach L carriage Bolt Set - used to attach A thru K connections are made with either 3/4” bolts
fingers and ramps. Measures 5” L X 5” H. Component parts. 3/8” X 2-1/2” bolt, flat washer with lock nuts (N) or 3/4” connecting pins (o).
3/4” bolt set (N) required for joint. and nut. Hot dipped galvanized. Commercial Tie Downs’ Wood Dock Plan Kit will show you
Grade 1/2” x 3”. the basics on building a lightweight and long
H washer Plate - use two washer plates with lasting floating dock system.
each angle. Measures M 3/4” Hex Head Bolt Set
1-1/2” L X 5” H. Used to connect male and female connectors.
Galvanized 3/4” X 3-1/2”.
I chain retainer - Bolts to side of dock. Use
weights and chains to hold dock in place.
Accommodates 1/4”, 3/8”, & 1/2” chain.
Measures 5” L X 5” H. (Non Stock)

Standard Grade commercial Grade Dock FLoaTS

orDer No. DeScrIPTIoN PrIce orDer No. DeScrIPTIoN PrIce Seamless, UV resistant black polyethylene shell filled with closed-cell
foam. The tough outer shell resists impacts and protects the foam core
TIe 24279 M $50.41 TIe 25491 B $51.08 from saltwater, gasoline, and most chemicals. Thick mounting flange,
with molded in mounting slots.
TIe 24280 J $49.01 TIe 26400 A $64.24

TIe 24284 H $3.72 TIe 26402 C $43.83

TIe 24289 K $13.38 TIe 26417 D $35.61

TIe 26521 A $58.98 TIe 26406 E $12.49

TIe 26522 B $54.56 TIe 26407 F $38.48

TIe 26523 C $29.19 TTIIee 2266440087 GG $$2188..9415
TIe 26409 H $3.84
TIe 26524 D $33.78
TIe 26527 E $9.48 TIe 26411 J $56.36

TIe 26528 F $36.33 TIe 26535 L $27.71

TIe 26534 L $11.24

TIe 26531 N $13.28

TIe 26532 G $28.05

orDer No. SIZe FLoTaTIoN PrIce
(LBS.)
ePT F2412 24” x 48” x 12”H $161.63
ePT F2416 24” x 48” x 16”H 450 $190.53

600

commercial Grade Heavy Duty Piling Hoop Dock HarDware 679

For pilings up to 12” in diameter. The hoop is constructed of 1-1/2” chain Pile Holder
pipe and is hot dip galvanized. It can be bolted directly to the side of the
dock or to the optional Deck Plate For use as a pile holder with 3/8” galvanized
chain and shackles. Can be adjusted for various pile
orDer No. PrIce diameters.
TIe 26412 $123.46 20-1/4” x 4-1/4”x 4-1/4”x 1/4” Steel
Commercial Grade

orDer No. PrIce
TIe 26419 $123.32

14” Hoop roller Pile Holder

20-1/4” x 4-1/4” x 4-1/4” x 1/4” Steel
Commercial Grade

orDer No. PrIce
TIe 26423 $220.23

commercial Grade Piling Hoop & roller assembly Stainless Steel Bollard

Intended for areas with lots of wind, current, or tidal action. Combines This high polish stainless steel bollard with
the Piling Hoop and Roller Assembly to make up and down movement baseplate can be used in fresh or saltwater
easier. For pilings up to 12” in diameter. applications.
• Unique design allows for easy use, and

maximum strength
• Allows rope to wrap or to fix to the cleat bars

orDer No. PrIce
DeI 2906F $169.22

orDer No. PrIce Heavy Duty roller assembly
TIe 26415 $262.40
Bracket and roller bolt directly to the Deck Plate (Model
Heavy Duty roller assy. w/ Bracket 26416) and can be added to aid up-and-down motion of
the dock in areas with tidal action. 6” roller turns on a 5/8” diameter
Used on fingers to keep wood from rubbing thru, also used as ramp shaft. 3/8” bracket is hot-dipped galvanized.
wheels. 6” Solid Rubber Roller with 5/8 Stainless Steel Shaft. 4 Bolt Commercial grade.
holes for mounting to our universal Deck Plate. Hot dip galvanized
like all our brackets. orDer No. PrIce

TIe 26414 $91.72

Piling Hoop

Heavy Duty 1/4” Stainless Steel x 5” high
Commercial Grade 14” Dia.

orDer No. PrIce orDer No. PrIce
TIe 26373 $263.48
ePT ra $52.37

Heavy Duty Universal Deck Plate Galvanized Piling Hoop

Will take 8” to 18” piling hoops and 4 bolt roller Piling hoops secure fingers and docks to pilings.This 1-1/2
assembly, keeps finger docks from breaking off Galvanized pipe can be bolted directly to the dock or finger.
if hit by a boat or storm. Deck Plate 1/4 x 5-1/4 For extra strength bolt to our
x 24 Bolts to front and top of the dock or finger, Universal Deck Plate. Order hoop
allowing for the removal of the bolted piling hoop. at least 2” larger than piling.

orDer No. PrIce orDer No. SIZe PrIce
ePT UDP $98.55 ePT 12H 12” $93.62
ePT 14H 14” $102.38
ePT 16H 16” $114.87
ePT 18H 18” $123.20

680 HarDware Piling rods

See Galvanized Hardware This 1” solid steel rod is used to
on pg 750 moor bow of boat to piling used
with 4”slide ring. To be used in
tidal areas.
5/8” Mounting Holes.

orDer No. SIZe PrIce
$134.88
ePT Pr6 6’ $131.25

ePT Pr5 5’

Drop Forged Swivels Thimble

Drop forged steel – all threaded components are heat Injection Molded Nylon White
treated. All swivels are hot galvanized. Jaws (jaw and eye
type) supplied with flat head pin and cotter. Vertical loads are
based on a safety factor of 5 to 1.

Jaw and eye Swivels

orDer No. SIZe workING PrIce orDer No. roPe SIZe I.D. PrIce
LoaD LBS DIa.
cHH 216050 1/4” $30.15 SDG 173553 3/8” $1.50
cHH 216104 5/16” 860 $32.66 SDG 173554 1/2” 1” $1.65
1260
1”
cHH 216159 3/8” 2200 $36.83

cHH 216203 1/2” 3600 $49.31

eye and eye Swivels

orDer No. SIZe workING PrIce
LoaD LBS
cHH 215152 3/8” Stainless Steel Thimble
cHH 215206 1/2” 2200 $32.66
cHH 215251 5/8”
cHH 215305 3/4” 3600 $40.43

5200 $68.03

7000 $86.06

wire rope Thimbles orDer No. SIZe PrIce
SDG 170003 1/8” $0.85
With galvanized finish. SDG 170005 3/16” $1.35
Recommended for light SDG 170006 1/4” $1.60
duty applications. SDG 170008 5/16” $3.90
SDG 170009 3/8” $4.25
SDG 170012 1/2” $8.87
SDG 170016 5/8” $9.95

orDer No. SIZe PrIce Galvanized wire rope Thimble
cHH 225250 3/8” $1.91
cHH 225359 1/2” $1.98 (Fed. Spec.
cHH 225403 5/8” $5.82 FF-T-276b)
cHH 225458 3/4” $6.63
cHH 225557 1”
$11.95

orDer No. wIre SIZe PrIce
SDG 172005
SDG 172006 3/16” $0.83
SDG 172008
SDG 172010 1/4” $0.66
SDG 172012
SDG 172016 5/16” $0.72
SDG 172019
3/8” $0.86

1/2” $1.25

5/8” $2.18

3/4” $5.01

HarDware 681

Stainless Steel Locking wire Fast eye Blocks

This stainless steel locking wire is available in ten foot coils or Malleable Cast Iron - Heavy Zinc Plating w/Ultraseal
one pound feeder boxes, with two sizes available
orDer No. DeScrIPTIoN PrIce
orDer No. DeScrIPTIoN PrIce PrL 31 3/4” for 3/16” Rope $7.03
wPT 30085 .032” x 10’ $4.13 PrL 33 $8.00
wPT 30086 .041” x 10’ $4.13 PrL 35 1” for 1/4” Rope $8.51
wPT 30087 .032” x 340’ PrL 37 1-3/8” for 5/16” Rope
wPT 30088 .041” x 225’ $19.50 PrL 39 1-1/2” for 3/8” Rope $10.37
$19.50 PrL 311 1-3/4” for 7/16” Rope $13.83
PrL 313 $17.94
PrL 315 2” for 1/2” Rope $26.60
2-1/2” for 5/8” Rope $35.54

3” for 3/4” Rope

Galvanized Screw Thread Shoulder “S” Hook
eye Bolts
Electrogalvanized mild steel

orDer No. THreaD SHaNk eYe PrIce orDer No. SIZe LeNGTH
SIZe LeNGTH oPeNING oVeraLL cTN. PrIce
SDG 1971421 1/4” INcHeS
2” SDG 1971531 5/16”
cHH 089050 1/4” 2-1/4” 1/2” $8.51 SDG 1971641 3/8” 2 10 $2.26
2-1/2”
cHH 089104 5/16” 3-1/4” 5/8” $10.42 2-1/2 10 $2.55

cHH 089159 3/8” 3/4” $10.90 3-1/16 10 $3.72

cHH 089203 1/2” 1” $14.04

Swivel eye Plate with ring eye Nut

Stamped 304 Stainless A ring is added to the swivel Investment Cast 316 Stainless
eye plate to allow more tiedown options. Not to be These threaded Eye Nuts are designed to be screwed onto various lengths
used for overhead lifting. of threaded stock or bolts to accommodate varying transom thickness.

orDer No. THreaD eYe PrIce
SIZe DIa.

orDer No. BaSe SIZe PrIce SDG 0781061 1/4” 5/8” $4.15
SDG 089513 2” x 1-9/16” $13.27
SDG 0781081 5/16” 13/16” $5.25

SDG 0781101 3/8” 1” $7.00

Plate rings SDG 0781121 1/2” 1-3/16” $11.25

Electroplated Shoulder Nut eye Bolts
Galvanized Steel
Galvanized weldless drop forged steel
Standard Package, 10 Pieces with hot dip galvanized threads.

orDer No. SIZe SIZe PrIce
INcHeS

PrL 1451 5/16x2-1/2 1-3/4x1-3/4 $11.94

orDer No. DIaMeTer aND ID SaFe THreaD work
LeNGTH LeNGTH LoaD PrIce
5/8” ToNS
Heavy Steel rings SDG 080822 5/16”x2-5/16” 5/8” 1-1/2”
SDG 080824 5/16”x4-1/4” 3/4” 2-1/2” 1/2 $2.95
Galvanized steel. Dimensions: 1st, diameter stock; SDG 080832 3/8”x2-7/16” 3/4” 1-1/2” 1/2 $3.35
2nd, inside diameter. SDG 080834 3/8”x4-1/2” 1” 2-1/2”
SDG 080843 1/2”x3-1/4” 1” 1-1/2” 3/4 $3.50
orDer No. SIZe PrIce SDG 080846 1/2”x5 7/8”
INcHeS 3” 3/4 $4.60

1 $5.08

1 $6.34

SDG 192415 1/4x1-1/2 $1.27

SDG 192520 5/16x2 $1.45 Galvanized Mild
Steel Quick Links
SDG 192630 3/8x3 $2.35

SDG 192830 1/2x3 $5.35 Std. pack, 10
(Sold each)
SDG 192840 1/2x4 $5.80

LaP LINk orDer No. DIa. STock JawS BreakING PackaGING PrIce
electroplated Galvanized Steel LeNGTH oPeNS

orDer No. SIZe PrIce SDG 158003 1/8” 1-1/4” 3/16” 550 Bulk $0.70
keY 6606 1/4” $0.61 SDG 158006 1/4” 2-1/4” 9/32” 5,000 Bulk $0.99
keY 6608 5/16” $1.28 SDG 158008 5/16” 2-15/16” 3/8” 10,000 Bulk $1.35
keY 6609 3/8” $1.60 SDG 158010 3/8” 3-1/2” 7/16” 15,000 Bulk $2.20

SDG 1580081 5/16” 2-15/16” 3/8” 10,000 Carded $2.87
SDG 1580101 3/8” 3-1/2” 7/16” 15,000 Carded $3.72

682 HarDware

Stainless Steel D Shackles Galvanized Screw
Pin anchor Shackle
(stainless 316)

SEA-DOG PIN BREAKING orDer No. PrIce
NUMBER SIZE STRENGTH SDG 147104 $4.17
147104 3/16” 2,200 SDG 147106 $4.51
147106 1/4” 3,300 SDG 147108 $6.43
147108 5/16” 6,600

Screw Pin anchor Shackle Bulk Skin Packed (1 per card)

Load rated orDer No. SIZe PrIce orDer No. cTN. PrIce
$0.93
Drop forged hot dipped galvanized. $1.08
$1.20
SDG 147804 3/16” $1.96 — ——
$2.57
SDG 147806 1/4” $3.47 SDG 1478061 10 $2.24
$6.34
orDer No. SIZe (ToNS) PrIce SDG 147808 5/16” SDG 1478081 10 $2.39
SDG 147606 1/4” 1/2 $3.06 $10.61
SDG 147608 5/16” 3/4 $3.22 SDG 147810 3/8” SDG 1478101 10 $3.03
SDG 147610 3/8” 1 $3.48
SDG 147611 7/16” 1-1/2 $5.54 SDG 147811 7/16”
SDG 147612 1/2” 2 $7.07
SDG 147616 5/8” 3-1/4 SDG 147812 1/2”
SDG 147619 3/4” 4-3/4 $12.34
$20.76 SDG 147816 5/8”

SDG 147819 3/4”

Above screw pin anchor shackles are forged to Drop Forged Galvanized Screw Pin
comply with Federal Spec. RR-C-271B.
anchor Shackles
Stainless Steel
Long D Forged Shackle Size, working load limit, and trademark are permanently
marked on all shackles. All shackles and pins are heat treated. Loads
are based on a safety factor of 6 to 1. When tested all shackles are
pulled at a uniform rate of speed in a direct tension. Shackles meet
Performance Requirements of Federal Specifications
RR-C-271D Type IVA*

orDer No. SIZe workING
LoaD LIMIT PrIce
cHH 201100 1/4”
cHH 201155 5/16” ToNS
cHH 201209 3/8”
cHH 201254 7/16” 1/2 $8.66
cHH 201308 1/2”
cHH 201353 5/8” 3/4 $10.73
cHH 201407 3/4”
cHH 201452 7/8” 1 $12.35
cHH 201506
SEA-DOG INSIDE INSIDE PIN BREAKING orDer No. PrIce 1” 1-1/2 $14.24
NUMBER WIDTH LENGTH DIA. STRENGTH SDG 1471531 $5.35
147153 3/8” 1-1/4” 5/32” 1,540 SDG 1471541 $5.95 2 $16.62
147154 7/16” 1-1/2” 3/16” 2,200 SDG 1471561 $7.01
147156 1/2” 1-7/8” 1/4” 3,300 SDG 1471581 $10.21 3-1/4 $30.88
147158 5/8” 2-1/4” 5/16” 6,600
4-3/4 $44.79

6-1/2 $62.68

8-1/2 $87.83

Bow Shackle D-Shackle Stamped

Investment cast 316 Stainless steel.
stainless body.

orDer No. PIN INSIDe INSIDe PrIce
DIa wIDTH LeNGTH
INS. PIN Brk
SDG 1470541 3/16” 1/4” 11/16” $3.28 orDer No. wIDTH INS. DIa. STr. PrIce

SDG 1470561 1/4” 7/16” 1” $3.99 SDG 140041 3/8” 5/8” 5/32” 1,100 $2.75

SDG 1470581 5/16” 5/8” 1-7/16” $5.40 SDG 140051 1/2” 11/16” 3/16” 2,640 $3.10

SDG 1470601 3/8” 3/4” 1-3/4” $8.25 SDG 140052 5/8” 15/16” 3/16” 2,640 $4.15

SDG 1470621 1/2” 15/16” 2-1/8” $13.96 SDG 140060 9/16” 15/16” 1/4” 3,080 $4.70

HarDware 683

Stainless Steel Stern eye rope clips For DIaM.
roPe
Malleable Steel orDer No. PrIce

Electrogalvanized SDG 159103 1/8” $0.48
10 per package.
SDG 159105 3/16” $0.66

SDG 159106 1/4” $0.66

orDer No. STock THreaD STUD cTN. PrIce SDG 159108 5/16” $0.81
SPace
SDG 159110 3/8” $1.00

SDG 0801351 3/8” 3-1/2” 1-1/2” 10 $12.35 SDG 159112 1/2” $1.68

SDG 0801551 7/16” 3-1/2” 1-7/8” 5 $20.45

Stainless Steel wire rope clip

Stainless eye & eye Swivel

orDer No. wIre PrIce
SDG 1595041 5/32” $3.26

orDer No. SIZe LeNGTH PrIce eye & eye Swivel
SDG 182106 1/4” 2-9/16” $6.75
SDG 182108 5/16” 3-9/16” $12.95 Forged hot dipped galvanized
SDG 182110 3/8” 4-1/2” $22.95
orDer No. SIZe a DIM. B DIM. workING LoaD PrIce
stainless eye & Jaw Swivel (ToNS)
SDG 181106 1/4” 3-7/16” 11/16” $6.40
orDer No. SIZe LeNGTH PrIce SDG 181108 5/16” 4-1/4” 15/16” 1/2 $6.75
SDG 1822061 1/4” 2 9/16” $9.16 SDG 181110 3/8” 5” 1-1/8” 3/4 $8.40
SDG 1822081 5/16” 3 9/16” $16.96 SDG 181112 1/2” 6-1/2” 1-7/16” 1 $12.35
SDG 1822101 3/8” 4 1/2” $28.95 SDG 181116 5/8” 7-11/16” 1-9/16” 1-1/2 $17.25
SDG 1822121 1/2” 6” $61.45 SDG 181119 3/4” 8-7/8” 1-7/8” 2 $29.00
4-3/4
Jaw and eye Swivel
Jaw & Jaw Swivel
Galvanized drop forged steel.
Investment cast 316 stainless body with
304 stainless pin.

orDer No. SIZe LeNGTH PrIce
SDG 1823081 5/16” 3-11/16” $19.96

orDer No. SIZe PrIce Size Length Safe Working anchor Swivel
SDG 181206 1/4” $7.10 Load (Tons)
SDG 181208 5/16” $8.04 1/4” 3-3/8” AISI 316 stainless.
SDG 181210 3/8” $9.27 5/16” 3-13/16” 1/2
SDG 181212 1/2” $14.52 3/8” 4-9/16” 3/4 orDer No. cHaIN SIZeS BreakING PrIce
SDG 181216 5/8” $19.75 1/2” 1 STreNGTH
SDG 181219 3/4” $29.95 5/8” 6” 1-1/2 SDG 1826081 1/4” - 5/16” $53.00
3/4” 7” 2 SDG 1826121 5/16” - 1/2” 5,500 lbs. $91.97
8” 4-3/4
17,000 lbs.

684 HARDWARE Bow Eye

Stainless Die cast zinc alloy, chromium-plated Forged steel shanks,
Steel Eye Bolt nut and washer. Shanks are one continuous “U” bolt, cast
inside eye.

ORDER NO. SIZE LENGTH PRICE
SDG 0804661 1/4” 2-3/8” $15.92
SDG 0804831 5/16” 1-3/8” $16.14
SDG 0804881 5/16” 3-3/16” $17.50
SDG 0804951 3/8” 2” $26.72

Length Length Diameter Inside

Shank Thread Shank Eye

Inches Inches Inches Inches ORDER NO. PRICE
PER 1235DP0CHR $22.85
Bow Eye 3” 2-3/4 5/16 1

Die cast chrome zinc head –
galvanized shaft

Stainless Steel Bow Eye

ORDER NO. SHANK LENGTH SHANK DIA. INSIDE EYE PRICE

SDG 0791331 3-1/16” 3/8” 15/16” $7.24

SDG 0791351 4-5/8” 3/8” 15/16” $7.41

ORDER NO. DIA THREAD STUD PRICE
LENGTH SPACE

Twin Shank Bow Eye SDG 0800331 3/8” 2-1/2” 1-1/2” $11.03
SDG 0800351 3/8” 3-1/2” 1-1/2” $10.54
Die cast chrome zinc head – chrome
steel shafts on 1 5/8” centers. SDG 0800551 7/16” 3-1/2” 1-7/8” $17.30

SDG 0800851 1/2” 3-7/16” 1-7/8” $21.48

“U” Bolt Bow Eye

ORDER NO. OVERALL SHANK THREAD PRICE
SDG 0792331 LENGTH THREAD LENGTH $11.72

5-1/4” 5/16” 2-15/16”

Stainless Transom 33963 Stainless steel “U” bolt eye. Shank length
Mount Ski Tow from butt plate 2-9/16”, 3/8”-16 thread by 2”. Safe
pull weight 6,000 lbs. Makes ideal ski tow hook.
ORDER NO. STOCK RING STUD PRICE Made of long-lasting stainless steel Inside eye
DIA. LENGTH diameter is 1-1/16”. Made from 3/8” stock.

SDG 3716311 3/8” 2-3/8” 3” $32.24 ORDER NO. PRICE
ATT 33963 $14.56

33923 Stainless steel “U” bow eye. Shank length from butt plate
3-7/16”, 1/2”-13 thread by 2”. Safe pull weight 12,000 lbs. Made from
long-lasting stainless steel and makes an ideal ski tow hook. Eye is
made from 7/16” stock.

ORDER NO. PRICE
ATT 33923 $32.15

HarDware 685

Stainless Steel Snap Hook Stainless Steel Snap Hook

orDer No. SIZe LeNGTH eYe DIa. PrIce orDer No. SIZe LeNGTH eYe DIa. PRICE
SDG 1515601 1/4” 2-3/8” 5/16” $3.20 SDG 1510601 1/4”
SDG 1515801 5/16” 3-1/8” 7/16” $5.75 SDG 1510801 5/16” 2-3/8” 3/8” $14.96
SDG 1516001 3/8” 9/16” $9.75 SDG 1511001 3/8”
SDG 1516201 7/16” 3-15/16” 11/16” SDG 1511201 7/16” 3-1/8” 7/16” $21.36
4-11/16” $12.95
4” 9/16” $33.27

4-3/4” 11/16” $40.53

Snap Hook Stainless Steel asymmetrical Snap
with eye insert
Mild Steel Electrogalvanized.
(German)

orDer No. SIZe LeNGTH eYe DIa. PrIce
SDG 1560601 1/4”
SDG 1560801 5/16” 2-3/8” 5/16” $2.51
SDG 1561001 3/8”
3-3/16” 7/16” $2.52

3-15/16” 9/16” $3.66 orDer No. STock LeNGTH eYe DIa. PrIce
SDG 1501051 3/8” 4” 7/16” $12.45
Stainless Steel Snap Hook SDG 1501251 7/16” 4-3/4” 9/16” $17.45
with eye Insert
Stainless Steel Snap
orDer No. STock DIa. LeNGTH eYe BreakING PrIce Hook with eye Insert
STreNGTH
KEY-LOCK SYSTEM -This snap
SDG 1515651 1/4” 2-3/8” 1/4” 700 $3.72 hook with Eye also provides for
the secure attachment to lines for
SDG 1515851 5/16” 3-1/4” 3/8” 1,400 $6.15 use on safety harnesses, fishing
lines, mooring buoy lines, etc.

SDG 1516051 3/8” 4” 7/16” 2,000 $9.95

Stainless Pelican Hook

orDer No. STock LeNGTH eYe DIa. BreakING cTN. PrIce
DIa. STreNGTH 10 $34.05

SDG 151105 3/8” 4” 7/16” 2,000

orDer No. LeNGTH eYe STD Pack PrIce

SDG 1897851 4” 1/2”x3/8” 10 $14.50

Mild Steel Spring Hook

Electrogalvanized Steel

Spring Gate Snap Hook

Investment Cast 316 Stainless

orDer No. a B c PrIce orDer No. Hook LeNGTH eYe BreakING PrIce
SDG 1542501 2” 7/16” 1/4” $5.94
SDG 1556301 13/16” 4-1/4” 1/2” 1,200 $3.20

686 HARDWARE

Heavy Duty Utility Snap Mooring Snap Hook
Forged Steel Electrogalvanized
Cast steel, nickel plated.

ORDER NO. EYE I.D. SNAP OPENING O.A. LENGTH PRICE ORDER NO. EYE I.D. O.A. LENGTH SNAP OPENING PRICE

SDG 1558321 13/16” 11/16” 4 1/4” $8.04 SDG 1558411 3/4” 3-15/16” 9/16” $5.45

Stainless Steel Snap Hooks (IMPORT)

Std Package of 10

ORDER NO. SIZE EYE I.D. LENGTH PRICE Utility Snap.
OVERALL
Forged Steel Electrogalvanized
KEY 2311SS14 TON 3/4” 4-1/8” $11.92
KEY 2311SS13 TON 1-1/8”
4-3/4” $13.80 ORDER NO. EYE I.D. SNAP OPENING O.A. LENGTH PRICE

Standard Pack 20 SDG 1558221 3/4” 11/16” 3-7/8” $6.68

Fast Eye Malleable Utility Snap
Baby Snap Bronze
Cast malleable steel nickel-plated
ORDER NO. LENGTH EYE CTN. PRICE
SDG 138420 1-7/8” 3/8” 10 $2.60 ORDER NO. EYE I.D. SNAP OPENING O.A. LENGTH PRICE

Swivel Eye SDG 1558121 11/16” 1/2” 3-7/16” $5.15

Snap Shackle Style #2311 b

Investment Cast 316 Stainless Solid Bronze

ORDER NO. PRICE Fast eye snap hook (IMPORT)

SDG 142700 $17.50

Style #249 B ORDER NO. SIZE OF LENGTH SNAP PRICE
EYE OVERALL OPENS
Solid Bronze Fast Eye Snaps
KEY 2311B14 3/4” 4-1/8” 1/2” $8.92
Standard Package 10. (Sold Each). KEY 2311B13 1-1/8” 4-3/4” 5/8” $12.04
(IMPORT) Std Package of 10

ORDER NO. EYE SNAP PRICE
SIZE OPENS

KEY 249B0 3/8” 1/4” $2.28

KEY 249B1 5/8” 3/8” $3.60

KEY 249B2 11/16” 5/8” $5.17 Swivel Eye Bolt Snap

KEY 249B3 3/4” 11/16” $7.81 Sand Cast Brass
Length - 3-5/16”
Swivel Eye Boat Snap Eye - 5/8” ORDER NO. PRICE
Opening - 7/16” SDG 1390161 $5.46
Investment Cast 316 Stainless
Style #251 B
ORDER NO. SIZE EYE SNAP PRICE
SIZE OPENS Solid Bronze Swivel Eye Snap
SDG 1461311 1
SDG 1461321 2 3/4” 7/16” $8.32 Standard Package 10. (Sold Each.)
SDG 1461331 3 (IMPORT)

3/4” 1/2” $10.96 EYE SNAP
SIZE OPENS
7/8” 1/2” $14.21 ORDER NO. PRICE

KEY 251B1 5/8” 3/8” $4.76

Swivel Eye Baby Snap KEY 251B2 3/4” 1/2” $6.19

Die Cast Manganese Bronze KEY 251B3 3/4” 5/8” $8.25
Length – 2-1/16”
Eye – 7/16”
Opening – 1/4”

ORDER NO. PRICE Brass Fast Eye Boat Snap
SDG 1310421 $11.88

Sandcast Brass

Baby Snap ORDER NO. SIZE OVERALL I.D.OF OPENING CTN. PRICE
Cast brass. Swivel Eye LENGTH EYE WIDTH
7/16”
Size of eye, inches 3/8 SDG 1391201 0 2 1/8” 5/8” 1/4” 10 $3.52
Length overall, inches 2-3/16 3/4”
SDG 1391211 1 2 7/8” 5/16” 10 $3.97
ORDER NO. PRICE 3/4’
SDG 1391221 2 3 3/16” 1/2” 10 $6.19
KEY 334B $1.40
SDG 1391231 3 3 13/16” 9’16” 10 $8.75

HARDWARE 687

Swivel Bolt Snap SS

Investment Cast 316 Stainless

Eye Straps Fig. 562-18-8 Stainless Steel ORDER NO. LENGTH EYE PRICE
SDG 1465901 3-9/16” 3/4” $9.79
5 Pcs. per bag
Swivel Bolt Snap Bronze
Length I.D.
Overall Eye ORDER NO. LENGTH EYE PRICE
Inches Inches SDG 136010 2-9/16” 3/8” $4.95
SDG 136012 2-11/16” 1/2” $5.03
1-5/8 1/4 SDG 1360161 3-1/8” 5/8”
1-7/8 5/16 SDG 1360211 3-1/4” 3/4” $10.36
$10.96
ORDER NO. PRICE Fig. 1242-Die Cast Zinc Alloy -
PER 0562DP0STS $13.90 Chromium Plated Trigger Snap
PER 1242DP0CHR $11.92
1 1/8”=0811011 Burnished bronze.

Swivel eye.

Sizes of eye, 3/8” round

Pad Eyes Length overall, 2-3/8”

Ring size snap 3/8” ORDER NO. PRICE
KEY 5013B38 $2.92
Opening, inches

Stamped 304 Stainless 1 3/8”=0811021 Trigger Snap

ORDER NO. HEIGHT INSIDE EYE TO EYE PRICE Die cast manganese bronze.
SDG 0811011 7/16” 7/16” Length – 2-9/16”
SDG 0811021 1/2” 9/16” 1-1/8” $4.84 Eye – 1/2”
Opening – 1/2”
1-3/8” $5.65

ORDER NO. MATERIAL PRICE

SDG 1368001 Die Cast Bronze $10.52
SDG 1398001 Brass $5.20

1 3/8”

Forged 304 Stainless Brass Fast Swivel Eye Boat Snap

ORDER NO. HEIGHT INSIDE EYE TO EYE PRICE Sandcast Brass

SDG 0812001 5/16” 3/8” 1-3/8” $5.23 ORDER NO. SIZE OVERALL I.D.OF OPENING CTN. PRICE
LENGTH EYE WIDTH
5/8” 3/8” 10 $5.88
SDG 1391311 1 3-3/16” 3/4” 1/2” 10 $6.96
10 $10.28
Die Cast Zinc Crome Plated SDG 1391321 2 3-11/16” 3/4” 9/16”

ORDER NO. HEIGHT INSIDE EYE TO EYE PRICE SDG 1391331 3 4-1/2”

SDG 0812421 3/8” 1/2” 1-3/8” $6.01

Forged Bronze w/ Bronze Finish Swivel Eye Boat Snap

ORDER NO. HEIGHT INSIDE EYE TO EYE PRICE Die Cast Zinc Chrome-Plated
ORDER NO. LENGTH EYE SNAP OPENING PRICE
SDG 0812701 5/16” 3/8” 1-3/8” $5.75 SDG 1481311 3-1/4” 11/16” 1/2” $4.34

1 3/8”=0812751

Fast Eye Boat Snap

Investment cast 316 stainless.

ORDER NO. SIZE EYE SNAP PRICE
SIZE OPENS
SDG 1461201 0
Forged Bronze w/ Chrome Finish SDG 1461211 1 3/8” 1/4” $5.99

ORDER NO. HEIGHT INSIDE EYE TO EYE PRICE 1 9/16”=0812761 5/8” 7/16” $6.64
SDG 0812751 5/16” 3/8”
SDG 0812761 3/8” 1/2” 1-3/8” $5.76 SDG 1461221 2 3/4” 1/2” $7.73

1-9/16” $7.35 SDG 1461231 3 3/4” 11/16” $10.51

688 HARDWARE Stainless Steel Straight Chock Stainless Steel Skene Chocks

Stainless Steel Bow Chocks (Sold each) (2 per card)

(2 per card)

ORDER NO. LENGTH PRICE ORDER NO. LENGTH PRICE ORDER NO. LENGTH PRICE
SDG 0600401 4-1/2” $27.65 SDG 0602001 5” $17.25 SDG 0600601 4-1/2” $31.71
SDG 0602101 6” $19.26 SDG 0600651 6” $49.49

Nylon Fairlead Cleats Tie Down Eye Strap

(Sold Each) Forged bronze wire chrome-plated.

Used commonly to hold down batteries, fuel tanks, ice chests,
life rafts, dinghys, etc.

ORDER NO. DESCRIPTION EYE TO EYE PRICE
SDG 0812511 Fits 1” Webbing 2-1/8” $6.72
SDG 0812521 Fits 2” Webbing 3-1/8” $7.66

Stainless Steel Jaw and Jaw Turnbuckle

ORDER NO. EYE FAST PRICE
SDG 082010 3/8” #8 RH $1.24
SDG 082051 1/2” #10 RH $1.83

ORDER NO. SIZE L1 L2 L3 A D BREAKING PRICE
LOAD

Skene Chocks SDG 185105 3/16” 7-1/2” 5-1/8” 3-1/8” 9/32” 9/32” 1980 $39.05

Die cast zinc chrome- SDG 185106 1/4” 8-9/16” 5-13/16” 3-1/2” 3/8” 3/16” 2860 $49.25
plated.
(2 per card) SDG 185108 5/16” 9-3/4” 6-13/16” 4-5/16” 3/8” 5/16” 5500 $68.75

Galvanized Mild Steel Quick Links

ORDER NO. LENGTH HEIGHT OPENING PRICE Std. pack, 10
(Sold each)
SDG 0640301 3-3/8” 3/4” 5/8” $10.95

ORDER NO. DIA. STOCK JAWS BREAKING PRICE
LENGTH OPENS

Clamcleat® Rope Cleats SDG 158003 1/8” 1-1/4” 3/16” 550 $0.70
SDG 1580061 1/4” 2-1/4” 9/32” 5,000 $2.45
Cleats for ropes up to 1/4” SDG 158008 5/16” 2-15/16” 3/8” 10,000 $1.35
002040 – CL204 Mini SDG 158010 3/8” 3-1/2” 7/16” 15,000 $2.20
002030 – CL203 Junior
Streamline Cleats
Cleats for ropes up to 1/2”
002010 – CL201 Vertical Die cast zinc alloy chromium-plated
Std. pack, 10
(Sold each)

CL203

CL204 ORDER NO. LENGTH DIMENSIONS MAX ROPE PIECES PRICE
BASE SIZE PER
ORDER NO. PRICE PER 0566DP2CHR CARD
SDG 002040 $3.95 PER 0566DP3CHR
SDG 0020301 $5.85 PER 0566DP4CHR 2” 2-3/16 x 1-1/8 5/16” 2 $13.66
SDG 0020101 $11.24
CL201 3” 3-1/8 x 1-1/2 3/8” 2 $18.80

4-1/2” 4-7/16 x 1-7/8 1/2” 2 $29.87

HARDWARE 689

CHROMALEX® ReadyCleat® A Portable Instant Cleat

Closed Base Cleats Used as an insert to the rod holder, when a fender is
required for docking and no permanent cleat is available
• Die cast zinc alloy bodies along the beam in the cockpit of a boat. ReadyCleat® is
• Polished chromium-plated inserted into any standard size rod holder, up to 9.5” in
depth, providing an instant fender cleat ready for action.
ORDER NO. LENGTH MAX. ROPE PCS. PER PRICE Made from high-impact lexan GF to withstand the harsh
O. A. marine environment, and a one-piece construction with no
PER 1305DP1CHR SIZE CARD breakable parts.
PER 1305DP2CHR 4-1/2”
3/8” 2 $28.09
6”
1/2” 1 $24.75

ORDER NO. PRICE

6” Folding Aluminum Cleat TAY 1084 $24.81

Ideal for small boats and watercraft. Cleats simply fold- Cleat Chrome-Plated Zinc
down when not in use and flip back up when it comes time
to tie off. Low-profile, fold-down design keeps cleat clear Overall length 6-1/2”, base
of dock traffic. Marine-grade aluminum protected with dimensions 3” x 1-1/8”, max.
corrosion-resistant finish. Easy to install on all dock types rope size 3/4”. Pkg.-5 cds. 2 Pcs.
with (2) standard 3/8-inch carriage bolts per card.
(not included).

ORDER NO. PRICE
ATT 120484 $15.26

ORDER NO. PRICE

PER 1252DP0CHR $49.83

Heavy Duty Black Nylon Cleats

ORDER NO. PACK LENGTH PRICE

SDG 0433401 1 Pr. 4-1/4” $5.00 Tie Down Cleat

SDG 0433601 1 Pr. 6” $7.17 Zinc chrome-plated.
(2 per card)
SDG 0433801 Ea. 8” $7.22
ORDER NO. LENGTH HEIGHT PRICE
SDG 0433901 Ea. 10” $9.00 SDG 6721001 4-7/16” 7/8” $5.10

4-Hole Cleat Fender Cleat

Die cast zinc chrome-plated Brass chrome-plated. (Sold each.)
(Sold each)
ORDER NO. LENGTH HEIGHT PRICE
ORDER NO. LENGTH HEIGHT PRICE SDG 6725501 2-1/8” 7/8” $6.01

SDG 0441041 4-1/2” 1-1/16” $7.22

SDG 0441061 6” 1-3/8” $9.02

Hollow Base Cleats Open Base Cleat

Stainless Steel Die cast zinc chrome-plated. (Sold each)

ORDER NO. LENGTH HEIGHT PRICE

ORDER NO. LENGTH HEIGHT FASTENER PRICE SDG 0446041 4” 1-1/4” $7.77
ATT 66009L6
ATT 660103 6” 1.2” 1/4” $18.91 SDG 0446061 6” 1-9/16” $20.24
ATT 660113
8” 1.4” 1/4” $29.27 SDG 0446081 8” 1-13/16” $24.25

10” 1.8” 5/16” $59.07

Hollow Base Cleats Open Base Cleat

Die cast Zamak with Perma-Plate chrome finish. This cleat offers all the Injection Molded Nylon.
performance advantages of a hollow base cleat. 2 per pack.
6244 – 4-1/2” cleat. for line up to 3/8”, drilled for #8 screw. 2 per card.
ORDER NO. LENGTH PRICE
6245 – 6” cleat, for line up to SDG 0430301 3” $3.51
SDG 0430401 4” $3.91
1/2”, drilled for #10 screw.
2 per card.

ORDER NO. PRICE
ATT 62443 $21.37
ATT 62453 $28.09

690 HARDWARE

Stainless Steel Hollow Base Cleats Stainless Steel Skene Bow Chocks

(Sold each) Length 4-1/2”, line size 1/2”, #10 fastener. Pack 1 pr.

ORDER NO. LENGTH FASTENER PRICE ORDER NO. PRICE
ATT 661133 $41.64

SDG 0416041 4” #10 FH $18.48

SDG 0416061 6” 1/4” FH $17.56

SDG 0416081 8” 1/4” FH $27.90 Galvanized Flat

SDG 0416101 10” 5/16” FH $43.47 Head Open Base Cleats

(Sold each)

ORDER NO. LENGTH FAST PRICE BLISTER PACK PRICE

SDG 040103 3-1/2” #8FH $1.19 — —
SDG 040104 4” #10FH —
Galvanized Hex Head SDG 040105 5” #12FH $1.59 — —
Open Base Cleats SDG 040106 6” 1/4” BOLT $5.80
SDG 040108 8” 5/16” BOLT $2.07 — $7.67
SDG 040110 10” 3/8” BOLT —
ORDER NO. SIZE PRICE SDG 040112 12” 3/8” BOLT $2.67 SDG 0401061* —
SDG 040208 8” $6.87
SDG 040210 10” $9.92 $6.87 SDG 0401081
SDG 040212 12”
$16.46 $9.92 —

$16.46 —

* Package of 2

Straight Stern Chocks Max. Length Width Pkg.-5 Cds Push-Up Cleat
Rope Size Overall
Cast bronze chromium- plated 1 Pc. • These cleats mount flush into your gunwale and push up when needed
ORDER NO. PRICE Inches Inches per card • Non-rattling
3/4 4 • No saw is needed to install
PER 0119DP4CHR $65.04 • Just drill & drop into place
316 Stainless Steel
Die Cast Zinc Alloy
Chromium-Plated Inches ORDER NO. SIZE PRICE
$83.37
7/8
$106.45
WHT 6804CB 4-1/2” $165.23

WHT 6809CB 6” $7.86
$7.86
WHT 6810CB 8” $7.86

BACKING PLATES

WHT 6804BP For 4-1/2”

WHT 6809BP For 6”

WHT 6810BP For 8”

Max. Length Pull-Up Cleat

ORDER NO. PRICE Rope Size Overall Width 1 Pair Investment cast 316 stainless. Includes
PER 1223DP0CHR $14.20 Inches Inches Inches per card backing plate.

1/2 3-1/2 7/8 ORDER NO. SIZE PRICE
SDG 0414241 4-1/2” $61.52
SDG 041426 5-3/4” $66.95

Yacht Cleats Flush Mounted Cleats

Die cast zinc alloy chromium-plated This cleat recesses flush to the deck for a
clean, contemporary look at an affordable
ORDER NO. LENGTH O.A. DIM. BASE PACK PRICE price. Corrosion-resistant 316 stainless steel Countersunk Model
INCHES INCHES construction (patented design). mounted with four screws
Water-resistant cleat recesses into cast
PER 1188DP4CHR 4 2-1/8 X 1-1/2 2 $36.36 body, and is captured with lubricated seals.

PER 1188DP6CHR 6 3 X 1-3/4 1 $24.77

PER 1188DP8CHR 8 4 X 2-1/8 1 $51.57

Design Refinements Stud Mount
• Easy to operate–simply pull up the supplied with 1/4”–20 studs,
lock washers, and nuts
cleat from its body
• Unique stud mount

Open Base Cleats

ORDER NO. LENGTH O. MAX. ROPE PCS. PER PRICE ORDER NO. DESCRIPTION PRICE
A. INCHES
PER 1306DP1CHR SIZE CARD ATT 665107 4-1/2” Cleat Countersunk Model $98.10
PER 1306DP2CHR
4-1/2 3/8” 2 $28.09 ATT 665147 6” Cleat Countersunk Model $109.17

6 1/2” 1 $24.75 ATT 665167 6” Cleat Stud Mount Model $117.07

HARDWARE 691

90 Degree Angle Bracket Butt Hinges

Stamped 304 Stainless Die cast zinc alloy chromium-plated.
(2 per card) Package 5
Sizes 2-3-4 have 4 screw holes –
ORDER NO. DIMENSIONS WIDTH PRICE Sizes 5-6-7 have 6 screw holes.
SDG 2213101 2-3/8” X 2-3/8” 9/16” $6.53 (2 per card)

Heavy Duty Cabinet Hinges ORDER NO. HEIGHT PIN WIDTH PRICE
INCHES INCHES
Die cast zinc alloy chromium-plated with stainless steel pin. PER 1293DP2CHR 1-1/2 $25.23
Surface type. Pkg. 5. PER 1293DP3CHR 2 1-1/2 $25.71
(2 per card) PER 1293DP4CHR 2 1-1/2 $26.31
PER 1293DP5CHR 2-1/2 $27.94
PER 1293DP6CHR 2-1/2 2 $31.05
PER 1293DP9CHR 3 2 $33.91
2-1/2
3

ORDER NO. PRICE Length Width Heavy Duty Cabinet Hinges
PER 0941DP0CHR $25.02 Open Overall
Die cast zinc alloy chromium-plated with
1-1/2” 1-1/2” stainless steel pin – 3/8” Offset Type.
Pkg. 5. (2 per card)

Length Width Offset ORDER NO. PRICE
Open Overall PER 0942DP0CHR $25.00

1-1/2” 1-1/2” 3/8”

Hinge

Die cast zinc alloy chromium-plated with stainless steel pin.
Pkg. 10.
(2 per card)

Heavy Duty Cabinet Hinges

Chrome-plated die cast zinc alloy
Surface type – 18-8 stainless steel pin
5 bags, 1 pr. per card

Length Width ORDER NO. PRICE
Open PER 1213DP1CHR $25.45

2-1/4 1-1/2

Length Extreme For ORDER NO. PRICE
Open Width Screw

No.

3” 1-1/2” 8 PER 0808DP0CHR $32.03

Strap Hinges

Pressure cast bronze – stainless steel pin.
Pkg. 5. (2 per card)

“Semi-Concealed”

Wrought brass – Chromium-plated
For use on doors with 3/8” inset.
Pkg. 5. (2 per card)
Dimensions: 2-3/4” x 2-1/8”

ORDER NO. PRICE ORDER NO. LENGTH WIDTH PRICE
OPEN INCHES
PER 0271DP0CHR $31.20 PER 0120DP1CHR 1-1/8 $95.08
PER 0120DP2CHR 4 1-1/8 $104.20
PER 0120DP3CHR 6 1-3/8 $156.47
8

692 HARDWARE

Flat Hatch Trim Wardrobe or Utility Hook

Stainless Steel, Polished Die Cast Zinc Alloy – Chromium-Plated. Pkg.-
For finishing around edges of hatch. Drilled off center for No. 6 flat head 10 (Sold each)
screws.
ORDER NO. PROJECTION WIDTH PRICE
PER 0610DP0CHR
1-3/8” 1-1/8” $6.63

ORDER NO. WIDTH LENGTH PRICE
PER 0258002STS
PER 0258004STS 1-1/4” 72” $57.39

1-1/2” 72” $61.79

Heavy Duty Cabinet Hinges

Chrome-Plated Die Cast Zinc Alloy

Continuous Hinge 18-8 Stainless Steel

Stainless Steel, Polished Pin 3/8” Offset. Pkg.-5
For use on Hatch Covers, Locker Doors, Windshields, etc.
Countersunk holes are two inches apart, center to center. (2 Per Card) Length Width
Open

ORDER NO. PRICE Inches Inches

PER 1214DP1CHR $25.45 2-1/4 1-1/2

ORDER NO. WIDTH LENGTH PRICE Flush Hinge
TAC H140114P72 1-1/4” 72” $77.53
TAC H140112P72 1-1/2” 72” $81.95 • Semi-Concealed For Overlay Doors
• Chrome-Plated Stamped Brass
Pkg.-10. (2 Per Card)

ORDER NO. DIMENSIONS SCREW PRICE
PER 0272DP0CHR INCHES SIZE

2-3/4” X 2-1/8” 4 $31.19

Turn Latch Cuddy Door Hinges

A simple twist latch for securing walk-thru windshields or other hatch Chrome-Plated Stamped Brass
openings. Black thermoplastic complete with self-tap screws. 2 per pkg.
Standard Pack 6 pkgs.)

ORDER NO. PRICE Length Width Pkg.-10 ORDER NO. PRICE
Open Overall 1 Pair PER 0924DP0CHR $33.39
Inches Inches Per

3 1-1/2 Card

TAY 1162 $5.17

Hatch Latch Flush Security Lock

Stamped 304 Stainless Die Cast Zinc Alloy - Chromium Plated
(Sold Each) A trim and sturdy lock designed to eliminate
bulky padlock type protrusions. Constructed for
ORDER NO. PRICE marine environment, this lock is ideal for lockers,
SDG 3210001 $14.25 compartment doors in consoles, dock boxes and
other applications requiring protection against
theft or vandalism. The design of this unit also
allows for easy installation by drilling a 1-5/8”
diameter hole. Door thickness, 1/2-3/4”,
size 2-1/4” x 2”.

Sliding Window Handle ORDER NO. DESCRIPTION PRICE
PER 0921DP0CHR Locking $61.00
Stainless Steel PER 0922DP0CHR $47.38
Glass thickness 1/4”. Length overall 3”. Non-Locking
Pkg. 5 pcs.
1 Pc. per card

ORDER NO. PRICE
PER 0954DP0STS $11.84

HARDWARE 693

Round Grip Handle Stainless Steel Strap Hinge
Short Side Door Hinge
Die Cast Zinc Alloy – Chromium Plated 316 Stainless
The round grip has no sharp edges and is ample Std. Pack 10 pr. (2 Per Card)
to accommodate a man size hand. Std. Pack 10 pr.
ORDER NO. LENGTH WIDTH PRICE (2 Per Card)
Pack 1 pr. SDG 2015101 2-1/8” 1-1/2” $10.08
SDG 2010201 2” 1-1/2” $10.26
ORDER NO. LENGTH HT. HEIGHT PRICE ORDER NO. LENGTH WIDTH PRICE
INSIDE

PER 1231DP0CHR 6” 3-1/2” 1-5/16” $27.08 SDG 2053901 4” 1” $19.76

Fiberglass Nylon Short Side Stainless Steel Door Hinge Stainless Steel
Strap Hinge
Door Hinge Std. Pack 10 pr. (2 Per Card)

Std. Pack 10 pr.
(2 Per Card)

Std. Pack 10 pr.
(2 Per Card)

ORDER NO. LENGTH WIDTH COLOR PRICE ORDER NO. LENGTH WIDTH PRICE ORDER NO. LENGTH WIDTH PRICE
SDG 2025101 2-1/4” 1-3/8” Black $5.46 SDG 2015301 2-3/4” 1-1/2” $11.15
SDG 2054001 6” 1” $25.26

Fiberglass Nylon Stainless Steel Flush Hinge Stainless Steel
Strap Hinge
Door Hinge (2 Per Card)
Std. Pack 10 pr.
Std. Pack 10 pr. (2 Per Card)
(2 Per Card)
ORDER NO. LENGTH WIDTH PRICE
ORDER NO. LENGTH WIDTH COLOR PRICE ORDER NO. LENGTH WIDTH PRICE SDG 2011341 4” 1-1/8” $8.87
SDG 2025301 3” 1-3/8” Black $5.45 SDG 2015351 3” 1-1/2” $11.18 SDG 2011361 6-1/8” 1-1/8” $11.18
SDG 2025311 3” 1-3/8” White $5.85

Fiberglass Nylon Butt Hinge Stainless Steel Hatch Hinge Stainless Steel Door Hinge

Std. Pack 10 pr. Std. Pack 10 ea. (Sold Each) Std. Pack 10 pr. (2 Per Card)
(2 Per Card)

ORDER NO. LENGTH WIDTH COLOR PRICE ORDER NO. LENGTH WIDTH PRICE
SDG 2025801 1-1/2” 1-3/8” Black $5.75 SDG 2052801 2-3/4” 3” $26.96
SDG 2025811 1-1/2” 1-3/8” White $5.95

Chrome Brass Hatch Hinge Stainless Steel Short

Std. Pack 10 ea. Side Offset Hinge
(Sold Each)
Std. Pack 10 pr.
(2 Per Card)

ORDER NO. LENGTH WIDTH PRICE ORDER NO. LENGTH WIDTH PRICE ORDER NO. LENGTH WIDTH PRICE
SDG 2042801 2-3/4” 3” $26.25 SDG 2015701 2-1/2” 1-1/2” $11.15 SDG 2053101 2-1/4” 1-1/2” $18.65

694 HarDware Investment cast adjustable Hinge

chrome Brass Take-apart Hinge 316 Stainless Steel Butt Hinge For hatches and doors. Corrosion resistant, fully
adjustable. Adjusts to hold doors open without
Std. Pack 10 pr.(1 Pr. Per Card) Std. Pack 10 pr. (1 Pr. Per Card) props, springs or shocks. When
properly adjusted, will not
orDer No. LeNGTH wIDTH SIDe PrIce orDer No. LeNGTH wIDTH PrIce accidentally slam shut.
Available in black
SDG 2042781 4” 2” Lt.Hand $29.31 SDG 2051401 1-5/8” 1-1/2” $15.47 and off-white.

SDG 2042791 4” 2” Rt.Hand $29.31 SDG 2051421 2” 2” $18.65 orDer No. coLor PrIce
TIM 29223 White $33.67
Investment cast 316 Stainless Steel Stamped 304 Stainless Steel TIM 29224 Black $31.58

Take-apart Hinge Butt Hinge Nylon Step Handle

Std. Pack 10 pr. Std. Pack 10 pr.
(1 Pr. Per Card) (1 Pr. Per Card)

orDer No. LeNGTH wIDTH SIDe PrIce orDer No. LeNGTH wIDTH PrIce orDer No. LeNGTH wIDTH PrIce
SDG 2052701 3-3/4” 2” Lt.Hand $29.00 SDG 2272601 6-1/2” 1-5/8” $7.48
SDG 2052751 3-3/4” 2” Rt.Hand $29.00 SDG 2015801 1-3/8” 1-1/2” $10.24
Safety Grab Handle
SDG 2015821 2” 2” $12.74
Molded of high impact plastic, this rugged
Stamped 304 Stainless Steel Stamped 304 handle has a soft leather grained vinyl covering
for a comfortable no slip grip. The Grab Handle
Semi-concealed Hinge Stainless Steel offset Butt Hinge mounts by through bolting with two 1/4” pan or
round head machine screws. Once installed,
Std. Pack 10 pr. Std. Pack 10 pr. (1 Pr. Per Card) decorative caps snap over mount holes so no
(1 Pr. Per Card) fasteners are visible. Handle measures 9 1/4”
long with a 6 3/4” bridge length and 1 5/8”
finger clearance.

orDer No. SIZe INSeT PrIce orDer No. LeNGTH wIDTH PrIce
SDG 2015901 1-1/4” 1-1/2” $10.24
SDG 2019141 2-3/4”x2-1/8” 3/8” $9.72

Stamped 304 Stainless Steel Flush Stamped 304 Stainless Steel orDer No. coLor PrIce
DeT 121132P Black $10.07
Mount concealed Hinge Butt Hinge DeT 121134P White $10.44

Std. Pack 10 pr. Std. Pack 10 pr. Quick Grip Safety Handle
(1 Pr. Per Card) (1 Pr. Per Card)
• Powerful dual locking suction cups can be
orDer No. LeNGTH wIDTH PrIce mounted in any direction

orDer No. SIZe PrIce SDG 2010701 1-1/2” 1-1/4” $8.22 • Easy to install and removes with the flip of a
lever – no tools required
SDG 2019541 2-3/4”x1-7/8” $9.73 SDG 2010721 2” 2” $10.26
• Stainless steel hardware

Investment cast 316 Stainless Steel Lift Handle

Door Hinge Chrome Plated Brass

Std. Pack 10 pr.
(1 Pr. Per Card)

orDer No. LeNGTH wIDTH PrIce orDer No. LeNGTH FaSTeNer cTN. PrIce orDer No. PrIce
SDG 2054101 3” 1-1/2” $22.65 SDG 2223401 4-3/4” #10 FH 10 $9.69
wTr 70080 $14.99

HARDWARE 695

T-Handle Lifts Studded Hand Rails

Chrome plated zinc 9-3/4” overall length
Surface Depth: 1/8” - 3/4” 7-5/16” length stud to stud
Diameter: 3”
Cut Out: 2-1/2” ORDER NO. DESCRIPTION PRICE
WHT S7095P
WHT S7096P Black $12.58

White $12.58

ORDER NO. MATERIAL LOCKING PRICE Door Hinge

WHT S226BC Chrome Plated Zinc Black Nylon Yes $41.51 Stamped 304 Stainless
No $31.17
WHT S230BC Chrome Plated Zinc Black Nylon Yes $41.51
No $31.17
WHT S226WC Chrome Plated Zinc White Nylon Yes $37.09

WHT S230WC Chrome Plated Zinc White Nylon 1.5 mm

WHT S3226BC Black Nylon

ORDER NO. A B C D PRICE
SDG 2010301 2-3/4” 1-3/8” 1-3/8” 1-1/2” $10.75

Windshield Adjusters “T” Handle Surface Mount Latch

Die Cast Zinc Alloy -- 1290 1291 For Smooth and Carpeted Surfaces
Chromium Plated side mount offset mount
Pack 1 Pr. Easily Installs in a 2-1/2 Inch Diameter Hole for Mounting

LENGTH O.A. LENGTH AD- Surfaces 1/8 to 3/4 Inch Thick
INCHES JUSTMENT
ORDER NO. PRICE The T - Handle drops down flush in either the open or closed

PER 1290DP0CHR 12” 9-1/2” $96.73 (180° Rotation) position (except with the offset cam bar positioned
PER 1291DP0CHR
upward). The rubber seal & boot under the T - Handle seals the

12” 9-1/2” $96.73 lock cylinder preventing water intrusion.

• Black, White or Gray Polymer Body

• Chrome Plated Zinc Alloy, Black or

White Polymer “T” Handle

Round Side Hinge • Stainless Steel Stem

Stamped 304 Stainless • Lock with 2 Keys

ORDER NO. LENGTH WIDTH PACK PRICE • Diameter Adjustment Inches: 3” #1091
SDG 2017101 4-1/16” 1-1/2” 1 pr. $12.27
ORDER NO. TYPE CAM BAR INCHES PRICE
Offset, 3/4 to 2-3/8 $55.79
PER 1091DP1BLK Locking- with Two Keys Offset, 3/4 to 2-3/8 $49.81
Straight, 1-1/4 to 1-7/8 $49.82
PER 1092DP1BLK Latch (non locking)

PER 1092DP3BLK Latch (non locking)

Strap Hinge Stainless Hatch Spring

Per. Card 1 pr. 1 Per Card

ORDER NO. SIZE FSTNR. PRICE ORDER NO. ADJ. FASTENER PRICE
ATT 660253 4” x 1” #10 (4) $28.44 LENGTH #6 RH $14.70
ATT 660263 6” x 1-1/8” 1/4” (6) $34.56
SDG 3216501 8-3/4”

Flush Latch Flush Lock & Latch

Non-locking type • Chrome-Plated Zinc and Black Plastic
No. 1 with flush cam bar and Flexible plastic • Locking Latch with 2 Keys
strike plate. No. 1 with flush cam bar and flexible
Pkg.-5. Sold Each. plastic strike plate.
No. 2 with offset adjustable cam bar.
Easily installs in a 2 inch dia. hole.

Door Face Plate Adjustment ORDER NO. DOOR DIMENSIONS ADJUSTMENT PRICE
(INCHES)
Thickness Dimensions Latch Bar 2-1/2” x 2-1/2” $53.54
2-1/2” x 2-1/2” 3/8”-3” $53.54
Inches Inches Inches ORDER NO. PRICE PER 0931DP1BLK 1/4”-1-1/8”
PER 0932DP1BLK $45.54 PER 0931DP2BLK 1/4”-1-1/8” 3/8”-3”
1/4-1-1/8 2-1/2 x 2-1/2 3/8-3

696 HARDWARE Hatch Hold-Down Clamps

Anti-Rattle Door or Hatch Pressure Cast Bronze – Polished Chromium-Plated
An excellent item with many uses, on hatch covers, windshields,
Pressure Cast Bronze – Chromium Plated windows, bait and fish boxes, etc. Pkg. 5. Sold Each.
Has 1/4” hole in lever for padlock. Pkg. 5
Sold Each.

Flat Mounting

Dimensions Clearance Length Width
Base Inches Padlock Inches Inches
Inches
3 1-1/2

2-3/4x1-3/4 1/4 ORDER NO. PRICE
PER 1112DP0CHR $95.85

ORDER NO. PRICE Angle Mounting
PER 1108DP0CHR $97.66

Length Width
Inches Inches

2-1/2 1-1/2

Windshield Keeper or Hatch Fastener ORDER NO. PRICE
PER 1113DP0CHR $95.85
Sold Each.
Chrome Plated Bronze

Length Dimensions Dimensions Hatch Spring

Bolt Bracket Keeper Formed 304 Stainless/Injection Molded Nylon
Big, heavy duty spring that is ideal for larger hatches and dock boxes.
Inches Inches Inches Strong stainless steel spring with internal safety cable that prevents
spring from being overextended during normal use. Heavy duty molded
1-1/2 1-9/16x1 1-7/8x7/8 nylon pads on both ends. Length 11-5/8”.

ORDER NO. PRICE

PER 0967DP0CHR $94.32

Windshield Keeper or Hatch Fastener ORDER NO. PRICE
SDG 3216801 $40.95
Chrome Plated Brass and Zinc, with Black Plastic Handle
Pkg. 5. Sold Each. Hatch Adjuster

Dimensions Formed and Stamped 304.
Base Stainless/Nylon
Inches
1-1/2 x 5/8

ORDER NO. PRICE
PER 0769DP0CHR $65.40

Utility Latch ORDER NO. LENGTH LENGTH CLOSED PRICE
CLOSED INCHES INCHES
Easy to install latch for hatches, windows,
doors and other applications. Rugged
nylon complete with mounting screws.
1 pair per card.

ORDER NO. PRICE SDG 3212911 11-1/8” 17-7/8” $28.96

TAY 551 $24.11 SDG 3212921 14-3/16” 24-3/16” $30.95

Chrome Brass Anti-rattle Fastener HARDWARE 697

Sold Each. Windshield Keeper or Hatch Fastener

FAST STD. Chrome Plated Brass and Zinc
ENER PACK Pkg.10. Sold each.

ORDER NO. LENGTH PRICE

SDG 2221101 2-7/8” #10 FH 10 $15.22

Dimensions Dimensions

Keeper Plate

Windshield Adjusters 1-1/2”x5/8” 1-1/2”x3/4” ORDER NO. PRICE
PER 0697DP0CHR $42.13
Chromium Plated. A powerful non-slip grip keeps this
adjuster in desired position.
1 Per Card.

Length Length O.D ORDER NO. PRICE Sliding Window Lock and
Closed Open Tube PER 1180DP0CHR $124.51
Inches Inches Inches Anti Rattler

12 21 1/2 Pkg. 5. 1 Per Card.

Dimensions

Height Mounting Adjustment
Plate
Sliding Window Lock and ORDER NO. PRICE
1-5/8” 1”x5/8” 1-1/8” PER 0937DP0CHR $18.03
Anti Rattler

Pkg. 5. 1 Per Card.

Height Dimensions Adjustment
Overall Mounting
Plate ORDER NO. PRICE
PER 0934DP0CHR $18.06
1” 2 x 5/8” 1 1/8” Sliding Window and Door Stop

Pkg. 5. 1 Per Card.
Die Cast Zinc Alloy – Chromium-Plated

Dimensions Length

Windshield Adjusters Mounting Stopping

Heavy Pattern – Chromium-Plated Plate Plate ORDER NO. PRICE
Illustration shows swivel PER 0935DP0CHR $19.18
base on left side and 1-7/8”x3/4” 1-1/2”
swinging base on right.
Sold Each.

ORDER NO. LENGTH LENGTH O.D. PRICE Barrel Bolts
CLOSED OPEN
INCHES INCHES 1/2 $121.41 Pressure Cast Chrome Plated Bronze
1/2 $127.04 Pkg. 5. Sold Each.
PER 1179DP1CHR 10 18

PER 1179DP2CHR 12 20

ORDER NO. DIMENSIONS PRICE
INCHES
PER 0947DP1CHR
Heavy Duty Barrel Bolt PER 0947DP2CHR 3-7/16x1-7/16 $49.31
PER 0947DP3CHR
Investment cast 316 stainless. 4-5/16x1-7/16 $53.49

5-1/4x1-7/16 $61.82

ORDER NO. SIZE PRICE Barrel Bolt

SDG 2212551 6-1/2” x 1-3/4” $31.47 Chrome-Plated Extruded Brass.
Sold Each.

Barrel Bolt ORDER NO. LENGTH FASTENER PRICE

Sand Cast Brass Chrome-Plated. SDG 2225011 2” #5-FH $7.98
Sold Each.

ORDER NO. LENGTH PRICE

SDG 2225221 2-7/8” $8.23

698 HARDWARE

Rim Lock Sets Pontoon

Die cast Zinc Alloy Chromium-plated. Five disc tumbler Replacement Latch
type with dead bolt for inside. With round knob and
lever handle, two keys. Pkg. 5 This durable lock set is a complete replacement kit
P918-DP-CHR Regular Bevel With Box Strike. for your pontoon’s gate latch. Universal
P919-DP-CHR Reverse Bevel with Flush Strike. sizing fits square frames of 1, 1-1/8,
and 1-1/4 inch on both left- and right-
hinged gates. Secure closure stabilizes
gate and prevents inward swinging.
Includes mounting hardware for quick
and easy installation.

ORDER NO. DOOR DIMENSIONS DIMENSIONS PRICE ORDER NO. PRICE
THICKNESS CASE
PER 0918DP0CHR
PER 0919DP0CHR INCHES 3-7/8x2 4-3/8x1-1/4 $178.21 ATT 114046 $15.95
3-7/8x2 4-3/8x1-1/4 $178.21
5/8 to 1-3/8

5/8 to 1-3/8

Rim Latch Sets

Die cast zinc alloy chromium-plated. Security Hinged Hasps
With round knob and lever handle,
no keys. Locked by thumb bolt inside. Pkg. 5. Die cast zinc alloy chromium-plated.
P928DP-CHR Regular bevel with box strike. Package 10. Sold each.
P930DPCHR Reverse bevel with flush strike.
ORDER NO. LENGTH WIDTH PADLOCK PRICE
CLOSED INCHES
INCHES

PER 1198DP1CHR 2 1 1/4 $21.52

DOOR DIMENSIONS DIMENSIONS PER 1198DP2CHR 3 1 1/4 $22.55
THICKNESS CASE ESCUTCHEON
ORDER NO. PRICE PER 1198DP3CHR 3-3/4 1 1/4 $22.98
INCHES INCHES

PER 0928DP0CHR 5/8 to 1-3/8 2-1/8x1-3/4 4-3/8x1-1/4 $108.33
PER 0930DP0CHR 5/8 to 1-3/8 2-1/8x1-3/4 4-3/8x1-1/4 $108.33

Hinged Locking Hasp

Die Cast Zinc Alloy Chromium-plated.
Padlock eye swivels to act as a latch. Pkg. 10. Sold Each.

Mortise Lock Sets Length Width Padlock
Closed Clearance
Die cast zinc alloy chromium-plated. Reversible.
Inches Inches Inches
Five disc tumbler type with dead bolt for inside.
3 1 11/32
With round knob and lever handle, two keys.

Backset 1-3/8”. Door
Thickness
Dimensions Dimensions ORDER NO. PRICE
Inches Case Escutcheon PER 1194DP0CHR $27.37

ORDER NO. PRICE Inches Inches Inches

PER 0927DP0CHR $162.29 1 to 1-3/8 2-3/4x2 4-3/8x1-1/4

Cupboard Bolt Cupboard Catches

Die cast zinc alloy chromium-plated. Package 5. Chrome-plated zinc.
Supplied with flush and offset strike – No. 2 Supplied with offset strike.
Dimensions Overall Package 5.
Inches: 2-1/8 x 1-1/2 Sold each.

ORDER NO. DIMENSIONS
OVERALL PRICE
ORDER NO. PRICE INCHES
PER 1101DP0CHR $28.23
PER 1102DP1CHR 1-1/2x1-7/8 $37.01

PER 1102DP2CHR 1-1/2x1-7/8 $37.01

Heavy Duty Cupboard Turns Security Hinged Hasp

Die cast zinc alloy chromium-plated. Pressure cast bronze chromium-plated 18-8
High quality in design and smooth operation. stainless steel pin.
Package 5. Sold each. Package 10. Sold each.

Dimensions Overall ORDER NO. LENGTH WIDTH PADLOCK PRICE
Inches: 2-3/8 x 2-3/8 CLOSED INCHES
INCHES
ORDER NO. PRICE
PER 0998DP2CHR 3 1 9/32 $54.17
PER 0978DP0CHR $47.31