Warranty Manual (Complete)

Transmittal - (Page 3 of 3)

Project: 506043-FWPS North Wing Ren. & Add.

E•tabli•hed 1911 Architect's 2005.18.00
Project No.:

Transmittal No.: 269

Date Sent: 03/26/10

Notes: Mr. Jones,

For your use, please find enclosed subcontractor and manufacturer warranties (in duplicate) that were not
previously included in the Warranty Manuals for the North Wing project. For your convenience, I have also
enclosed two (2) copies of a revised Table of Contents for each of your manuals, along with a quantity of
sheet protectors.

A copy of each warranty will also be submitted to Mr. Dirk Danker at Nagle Hartray for reference.

If you have any questions or concerns, please feel free to contact me at the number as listed on page 1 of
this transmittal.

Thank you.

_...,,,,..215~ ~--- Merrell Jones - Administrative Assistant 03/26/10
----.-~-------- ~----- Printed Name - Title Date
From Signatw

II II

NagleHartrayDankerKaganMcKayPenney

312.425.1000
312. 425.1001
w.w1.nhdkmp.com

' 30 West Monroe Street
Chicago, Illinois 60603
~, Ntemorc:tndum / / ,/ ~ - , , ~

Date: 13 July 2009

Re: Francis W. Parker School - North Wing Renovations & Additions
Project Close-out documentation: Warranties
NHDKMP No. 2005.18.00

To:
Damian Jones, Bob Haugh, Chad Matesi, Roger McCarron, Larry Wiley

Via: email

From: CC:
Andrew Gale Dirk Danker

Comments:

NHDKMP has reviewed the warranties submitted by Berglund Construction Company in partial fulfillment of the close out
procedures for the above listed project. We note the following deviations from the contract documents:

07141: 2 year installer warranty specified. 1-year submitted
07142: 2 year installer warranty specified. 1-year submitted
07811: 2 year manufacturer's warranty specified, to be signed by the installer. 1-year submitted
07550: No warranty documentation submitted
08211: Life of Installation warranty specified. 1-year submitted
08411: No warranty documentation submitted
08520: No warranty documentation submitted
08911: No warranty documentation submitted 10101: 50 year warranty specified. 1-year submitted
11000: Incorrect date noted for start of warranty
11132: No warranty documentation submitted
12660: 10 year warranty specified. 1-year submitted
14240: No warranty documentation submitted
15000: 1-year guarantee specified to commence from the date of acceptance of work. Submitted guarantee commences from the
subcontractor's presumed date of completion for the various equipment and systems.
15975: No warranty documentation submitted
16000: No warranty documentation submitted

Thank you,
Andrew Gale

Merrell Jones Merrell Jones
Monday, March 29, 2010 5:51 PM
From: 'Chad Matesi (PMA)'
Sent: Dirk Danker (Nagle Hartray); [email protected]; Larry Wiley
To: Francis Parker North Wing Warranties Submitted to Owner
Cc: Warranties Submitted per Architect's Comments.pdf
Subject:
Attachments:

Chad,

Per NHDKMP's memo dated 7/13/09, we have submitted to the Owner all of the outstanding warranties with the
exception of 08411, 08520, 08911, which will be submitted at a later date. We have also sent a copy of those warranties
to Mr. Dirk Danker at Nagle Hartray for record.

Please feel free to contact me if you have any questions or concerns.

Thank
you.

BERGLUND CONSTRUCTION

Tracking:

1

Recipient Delivery
'Chad Matesi (PMA)' Delivered: 3/29/2010 5:51 PM
Dirk Danker (Nagle Hartray)
[email protected]
Larry Wiley

2

~ ~ INC.

PALATINE
BUILD •RS SUPP

•HOLLOW META L DOORS A N D FRAMES
•WOOD DOORS • FINISH HARDWA RE

2251 NICHOLAS BOULEVARD • ELK GROVE VILLAGE, IL 60007-5927
(847) 952-1400 FAX (847) 952-1775

PROJECT: Job# 506046-
Francis W. Parker School North Wing Addition

TIME: P:ERlOD OF GUARANTEE ONE YEAR STARTING: February 24, 2009

GUARANTEE: If, within one year after the Date of Substantial Completion of the Work or
designated portion thereof or within one year after acceptance by the Owner of
designated equipment or within such longer period of time as may be prescribed
by law or by the terms of any applicable special warranty required by the
Contract Documents, any of the Materials are found to be defective or not in
accordance with the Contract Documents, the Contractor shall correct it
promptly after receipt of a written notice from the owner to do so unless the
Owner has previously given the Contractor a written acceptance of such
condition. This obligation shall survive termination of the Contract. The Owner
shall give notice promptly after discovery of the condition.

The warranty shall cover any repairs and or replacement to any part of the Work
related to the basis defect.

CONTRACTOR: Inc.

BY: Vice President of Sales Tom Williford

(Title) (Printed)

Eggers

Eggers Door Warranty

DURATION OF WARRANTIES

j"' ~~ 4• ........ .....,.,.....,
"k'
Particle Life of original installation Not warranted

SCL Life of original installation Two years from date of original installation

Stave Life of original installation Not warranted

Plastic Life of original installation Not warranted

Mineral Core Life of original installation Not warranted

Acoustical Life of original installation Not warranted

Acoustical Airport - Flush Life of original installation Five years from date of original installation

Acoustical Airport - Stile and Rail Life of original installation Two years from date of original installation

Lead Shielded Life of original installation Not warranted

Stile & Rail - Non-Rated Life of original installation One year from date of original installation*

Stile & Rail - 20 Minute Life of original installation Not warranted

Stile & Rail - 45, 60, 90 Minute Five years from date of original installation Not warranted

Full Lite Construction Life of original installation Not warranted

Bullet Resistant Life of original installation Two years from date of original installation

Core One year from date of original installation Not warranted

* m warranty coverage of up to twenty-five doors per project unless written exclusion is obtained from Eggers Industries at time of quoting.

All doors manufactured by EGGERS INDUSTRIES of Neenah, Wisconsin and been determined. In the event the defect for which the doors are being
EGGERS INDUSTRIES of Two Rivers, Wisconsin (hereinafter referred to as rejected was apparent prior to hanging, Eggers is not obligated to pay
Eggers) are warranted to be free from defects in material and workmanship removal and rehanging charges.
which would render them unserviceable or unfit for the ordinary, recommended
use for the time periods as set forth below. This warranty automatically NOTICE REQUIREMENT
applies to purchasers of doors from Eggers and extends on resale of the Since Eggers cannot control the handling or exposure of doors after shipment,
product. Claims should be processed through the intermediate suppliers. a specific duty of inspection is imposed upon the purchaser as a condition
precedent to any claim under this warranty. Such inspection must be made
LIMITATIONS OF LIABILITY upon receipt of the goods and written notice of any claim must be received by
Eggers shall not be liable for incidental, indirect or consequential Eggers within 30 days of receipt of the goods, or discovery of the defect. NO
damages arising from the manufacture, use or sale of these goods. (This CLAIM UNDER THIS WARRANTY SHALL BE ACTIONABLE UNLESS THE
warranty gives you specific legal rights, and you may also have other FOREGOING NOTICE IS GIVEN AS SET FORTH HEREIN.
rights that vary from state to state.) Eggers' liability is expressly limited
to the repair or replacement of non-conforming goods or the refund of It shall not be the policy of Eggers Industries to inspect finished installations for
the purchase price, at the option of Eggers the sole purpose of certifying that the installation is within warranty.

If any door becomes defective after installation, Eggers agrees to bear the MATIERS EXCLUDED FROM THIS WARRANTY
reasonable expense of repairs, rework, machining, finishing, removing and Since methods and conditions or installation and use are beyond the
rehanging, such repairs, rework, removal and rehanging shall be performed control of Eggers, this warranty is not effective unless the doors are
only after approval is obtained from Eggers and the cost of such work has stored, handled, finished, used and installed in strict accordance with
the provisions set in the following guidelines of this warranty.

Purchaser: PALATINE BUILDERS SUPPLY, INC. Installation: FRANCIS PARKER NORTH WING RENOVATION

Address: 2251 NICHOLAS BLVD. Date: 01/11/10

City: ELK GROVE VILLAGE State: IL___ Zip: 60007

S' .,~d: ~~~
V.P. Sales & M a r k e t i n g - - - - - - - - - - - - - - - - - - - - - - - - - -
\ ...../

Eggers #(s}:26979 19820 & 28181

Customer Purchase Order: 0063401 0061967 & 0063638 T7080

Eggers Door Warranty
(Tolerances, Exclusions and Instructions)

I TOLERANCES I 12. Constructions, other than flush SCL, involving appliques (excluding applied moulding)
that are applied to only one face of the door.
1. Stile, rail and core show-through (telegraphing) shall not be considered adefect unless
13. Doors .that are not stored as outlined in the Handling, Finishing and Installation
the face of the door varies from atrue plane in excess of 1/1oo• (.01O") in any 3• span. Instructions.

2. Warp shall not be considered adefect unless it exceeds 1/4" in the plane of the door 14. Doors that are stored longer than six months.
15. OEM's warranty applies to all accessories supplied by Eggers.
itself. For doors 1-3/4" or thicker, warp shall not exceed 1/4" in doors 3'6" x 7'0" or 16, Doors that have any form of face grooving which penetrate the crossbanding in excess of

smaller, nor shall it exceed 1/4" in any 3'6" x 7'0" section of larger doors. For doors less limitations set by the factory.
17. Doors altered by others for size by re-railing or re-stiling or refacing.
than 1-3/4" thick, warp shall not exceed 1/4" in doors 3'0" x 7'0" or smaller. Warp is any 18. Stylus moulding on one side of the door. Applied moulding on one side of door if moulding

distortion in the door itself and does not refer to the relationship of the door to the frame, is over 1-3/4" wide, 3/4" high or over 24 lineal feet. Miter joints and flatness on mouldings
over 3" in width.
jamb, or adjacent doors. Warp is measured by placing a straight edge on the concave 19. Doors up to 7'6" in height with less than three hinges and doors with less than one
additional hinge for each incremental 30" of height over 7'6". This exclusion is waived on
face and determining the maximum distance from straight edge to door face. non-rated particle, agrifiber, or stave core up to 8'0", stile &rail doors up to 8'0" and SCL
core doors up to 9'0".
3. Tolerances for all applied moulding locations are ± 1/8" reference to all margins. 20. Doors machined for comer mortised flush bolts unless installed with metal edges or flush
bolt cap.
I HANDLING, FINISHING AND INSTALLATION INSTRUCTIONS I 21. Doors machined for specified concealed vertical rods unless installed with metal CVR
cap. Consult factory for applicable CVR devices.
1. Store doors flat on a level surface in a dry, well-ventilated building. Protect doors 22. Lites not glazed by Eggers, including glass breakage and damage to the door.

with an opaque covering that does not permit light to penetrate to keep the doors clean NOTE: Action on any claim for warp or telegraphing defects may be deferred at
the option of the manufacturer for a period not to exceed 12 months to permit
and avoid discoloration. Covering must allow air circulation. If doors are to be stored more conditioning of the doors to temperature and humidity conditions.

than aweek, all edges should be sealed. Deliver doors or frames to building site after

HVAC system is operating and balanced and plaster or cement is dry.

2. Doors should not be subjected to extreme heat and/or humidity. Relative humidity should

not be less than 25% or greater than 55% and temperatures should not be less than 50

degrees F. or greater than 90 degrees F.

3. Handle with clean gloves and do not drag doors across one another or across other

surfaces.

4. The utility or structural strength of the doors must not be impaired in the fitting of the door,

the application of hardware or cutting and altering for lites, louvers, panels or any other

special details. I EXTERIOR FLUSH AND STILE AND RAIL DOOR GUIDELINES I

5. Use three hinges for doors 7'6" in height or less, and one additional hinge for each

incremental 30" of height over 7'6". An exterior door is defined as one that cannot be controlled on both sides for temperature and

6. Allow afitting clearance of 1/16" to 1/8" at each side and at the top. humidity.

7. Seal all edges immediately after field fitting.

8. Prior to field applied finishes doors must be sanded. The finisher should thoroughly sand When exterior doors are machined for hardware or a lite opening opportunity exists for
moisture penetration into the door which will eventually cause deterioration. Therefore, the
the doors with 150-grit sandpaper going with the grain direction of the veneer. Ahand existence of the following conditions will void the warranty for exterior installations:
1. Doors installed outside the continental 48 states.
block should be used to remove all scuffs, handling marks, scratches, raised grain, 2. Machining for pivots and magnetic switches in the top rail of the door.
3. Failure to double seal all machined surfaces including openings and hardware
burnishes and effects of exposure to moisture that may occur during handling, unloading
exterior sealer.
and storage. 4. Failure to properly protect lite cutouts in exterior doors to prevent moisture from seeping

9. Some woods, particularly Oak, contain chemicals which react with iron. Do not use steel into the core. Lip mouldings and exterior caulk are required. The top of an exterior door
must be properly protected by flashing (except STC doors for airport housing).
wool on Oak doors. 5. Failure to provide adequate overhead protection. Adequate overhead protection includes a
maximum of 4ft. between the top of the door and the bottom of the overhead, a minimum
10. Doors prefinished at the factory should be checked against approved finish sample prior overhead protection of 4 ft. out from the face of the door and a minimum protection
extension of 4 ft. out from each side of the door.
to hanging. (Installation of prefinished doors shall constitute acceptance.) 6. Failure to provide the entire door including top and bottom edges with two coats of a good
quality paint, varnish or lacquer.
11. Stile and rail doors not prefinished at the factory must be stained and sealed, or painted, 7. This warranty does not cover telegraphing and checking of exterior doors.

within 10 working days after the doors arrive from Eggers. Stile and rail doors supplied to

Hawaii or Alaska must be factory finished.

12. Pilot holes must be qrilled for all screws that act as hardware attachments. Self-tapping

or combination wood/metal screws are not warranted for use on wood doors.
I EXCLUSIONS I

This warranty does not cover:

1. The appearance of field finished doors.

2. Natural variations in the color, texture, character, or cut of the wood. Additional Exterior Guidelines
1. Eggers will not quote the Stylus door for an exterior application.
3. Doors with cutouts closer than 5" to the door edge or doors with adjacent cutouts such as 2. Eggers will not quote exterior doors with concealed hardware (vertical rods, flush bolts and

hardware, lites, louvers, etc. closer than stated minimums. closers/holders/stops).
3. Eggers will not quote exterior doors with louvers.
4. Doors which have cutout areas exceeding 40% of the door area or 54" in door height. 4. The 20-minute door will be quoted for exterior applications, but no lite cutouts will be

However, waivers in writing from the factory are available on a per job basis. This allowed.
5. Eggers will not quote 45, 60 and 90-minute flush doors for exterior application.
exclusion is waived on special full lite construction warranted for life of original installation 6. Eggers will not quote doors for applications with applied moulding and reveals.

for interior use.

5. Doors that are improperly hung and door frames that are not plumb, square and level and

do not allow the door to swing freely.

6. Warpage of doors less than 1-3/4" thick which are wider than 3'0" or higher than 7'0".

7. Normal wear and tear including wear-through of finish. Exterior finishes should be used on the exterior faces and all edges of exterior doors. A
complete and continuous finish must be maintained on all surfaces of the door and must be
8. Doors supplied outside the United States for telegraphing or warpage unless approved by refinished annually.

the factory. I Airport Housing Projects

9. Cracking of plastic laminated surfaced doors with openings cut by other than Eggers or its STC doors have been approved for residences around airports in Southern California and the
Southwest with afive-year warranty. Contact the factory regarding exterior STC door
authorized representative. Radius of 1/4" at comers of openings must be maintained. requirements for airport housing projects in other locations. Top flashing not required on STC
doors.
10. Incompatibility of hardware with a particular door construction. This includes mortises

such as concealed closers, magnetic holders, etc. deeper than 2" or wider than 1-1/4"

and concealed vertical rod devices, unless special reinforced construction is ordered.

11. Constructions involving different species, face materials, or veneer grain configurations

on opposite sides of the door. This includes doors with different plastic colors or patterns

on each face. This may create an unbalanced condition not warranted against warpage,

cracking, delaminations, etc. Exclusion may be waived for SCL core flush doors or stile It should be noted that both the WDMA and AWi Standards indicate that wood do!Y -~e

and rail doors with proper approval in the form of a letter from manufacturing. not recommended for exterior use. I)

~·Eggers Industries P.O. Box 88 •Two Rivers, WI 54241-0088 P.O. Box 1050 •Neenah, WI 54957-1050
(920) 793-1351 •Fax (920) 793-2958
e-mail: [email protected] (920) 722-6444 • Fax (920) 722-0357
website: www.eggersindustries.com

Form No. 278 (12/09)

J;;:•====i BERGLUND Transmittal

! F J CONSTRUCTION Project: 506043-FWPS North Wing Ren . & Add.

Established 1911 Architect's 2005.18.00
Project No.:
Berglund Construction Company
111 E. Wacker Drive, Suite 2450 Transmittal No.: 271
Chicago, IL 60601
Phone: 312.726.6624 Date Sent: 05/14/10
Fax: 312.726.6629
From: Merrell Jones
Berglund Construction Company
Phone: (312) 726-6624, Ext. 3359
Fax : (312) 726-6629
E- mail: [email protected]

To: Damian Jones Items listed are being sent
Francis W. Parker School
330 West Webster Avenue 0 Enclosed
Chicago, IL 60614
Phone: (773) 797-5103 D Under Separate Cover
Fa x : (773) 549-4669
E-mail: [email protected] Via: FedEx Ground
(Tracking No. 871896410022134)

cc: Dirk Danker - Nagle Hartray Danker Kagan
McKay Penney Architects Ltd .
Chad Matesi - Project Management Advisors,
Inc. (TRAN SM ITTAL ONLY)
BCC File

Subject: Closeout Documents: Warranties

We are transmitting the following to you:

D Architectural Drawings D 0 & M Manuals D Addenda 0 Other: Closeout
D Engineering Drawings 0 MSDS/Reports D Change Orders
D Shop Drawings D Product Data D Contract Warranties
D Plans D Samples D Letters
D Prints D Specifications D Payment Application

Specification Architect's Comments (7/13/09) Comments Number of
Copies
08411: No warranty documentation submitted EFCO Limited 10-year Warranty submitted 2
by Frontrunner S:ystems1 Inc. Please
08520: No warranty documentation submitted insert behind tab 19 (Aluminum Windows
08911: No warranty documentation submitted and Glazing) in the Wananty Manual

Same As Above
Same As Above

= i ....,=. Transmittal - (Page 2 of 2)

=i ;=== i~ Project: 506043-FWPS North Wing Ren . & Add .

Established 1911 Architect's 2005 .18.00
Project No.:

Transmittal No.: 271

Date Sent: 03/26/10

Notes: Mr. Jones,

With the submission of the enclosed EFCO manufacturer warranties, we have completed the closeout
documentation for the North Wing project. These are the last of the warranties not previously included in
your Warranty Manuals for the North Wing project. For your convenience, I have attached detailed
instructions as to where these documents should be inserted into your manuals and have also enclosed two
(2) updated copies of the Table of Contents.

A copy of each warranty will also be submitted to Mr. Dirk Danker at Nagle Hartray and to Mr. Chad Matesi at
Project Management Advisors for reference.

If you have any questions or concerns, please feel free to contact me at the number as listed above.

Thank you.

_:::Jvf~U~ Merrell Jones - Administrative Assistant 05/14/10
--Crom Signaf1"(.:£'"
Printed Name - Title Date

Ft FRONTRUNNER GLASS & METAL, INC.

LETTER OF TRANSMITTAL

TO: Berglund Construction Co. DATE: May 6, 2010
111 E. Wacker Drive - Suite 245( FGM -# 4892
Chicago,IL 60601
RE: F.W.Parker N. Wing Add .
ATTENTION: Larry Wiley/Merrell Jones 330 W. Webster Ave.
Chicago, II.
Closeout Submittal

WE ARE SENDING YOU THE FOLLOWING

x Herewith Shop Drawings Schedules

Copy of Letter Specifications Plans

Under Separate Cover Sample x Other (see below)

COPIES DATE NUMBER DESCRIPTION

3 5/6/2010 EFCO Storefront 10 Year & Curtainwall 10 Year Warranty

For Approval Approved as Submitted Revise/ Resubmit
As Requested
REMARKS: Approved as Noted XX For Your Use

0 COPY TO: file SIGN~'
Flor Villasenor

470 W .North Frontage Rd .-Suite A- Bolingbrook, IL 60440 PH 630-633-2900 FAX 630-633-2950

I I a Pella Company

1000 County Road· Monett, MO 65708 • 800 .221 .4169 ·Fa x: 417 .235 .7313

n

EFCO CORPORATION

LIMITED WARRANTY

EFCO CORPORATION warrants to the first retail purchaser only, that all
articles, materials and work will be free from material defects in
manufacture. EFCO CORPORATION's liability extends only to its buyer and
is limited by the Terms and Conditions stated on the reverse side of this form.

EFCO CORPORATION's warranty on the product(s) shall extend from the
issue date as follows:

Glass Not Applicable
Window Not Applicable
Storefront 10 year(s)
Curtainwall 10 year(s)
Finish Not Applicable

EFCO CORPORATION excludes any implied warranties of
merchantability and fitness for a particular purpose.

EFCO's liability will not extend beyond repair or replacement of the defective
material. EFCO will not be responsible for any consequential damages
caused by its products.

There are no warranties which extend beyond the description on the face
hereof

Job Name: FW PARKER SCHOOL NORTH WING Rep : 1205
EFCO Job No.: 7269703
Customer Name: FRONTRUNNER SYSTEMS

Issue Date: 2007-07-25

u Architectural Window, Curtain Wall
Storefront Systems

See reverse side for additional terms and conditions.

·-------------···----·

Where windows are just the beginning.

WARRANTY

The limited warranty for INSULATED GLASS UNITS warrants the units will be free from obstruction of vision as a result of dust or

film formation on the internal surfaces caused failure of the h!.:'nnetic seal due to defects in material or workmanship.

The limited warranty for BAKED-ON FLUROPOLYMER PAINT COATINGS warrants that paint finishes will not chip, crack, blister, or

EFCO docs not warrant any finishes for filoform corrosion in Coastal environment.

Corrosion of <my or component caused exposure to salt atmosphere, acid rain, alkaline, or other extreme conditions is not covered.
EFCO disclaims all
for and with respect to any material which has been to abll'>e, alteration, modification, neglect, misuse,

war, flood. or acts of God.

This aluminum surfaces against chalking, and change of

color. per or 61 l in force at the time warranty applies only when the

finish types recommended for the environment of the prc~ject site are used. EFCO reserves the right to refinish defective

components in the field or at its sole discretion.

EFCO

If any material shall be found to be defective EFCO in material or such material shall be or at the

of EFCO, after a n'.nr""''n of EFCO, and with the consent of EFCO, without

EFCO, it is determined the became defective under lhe conditions of this warranty, EFCO agrees to

material as EFCO.

for defects caused accidents, modifications to abuse. failure to perform

reasonable and ne<cesrsair·v cvccm1cvv1, failure to follow instructions. to salt fire. and other
acts of nature. All manufactured parts will be limited to the from the
warranty and arc "''nrrc·~"1v
EFCO limited warranty.

EFCO shall not be liable for material ll1 or installation: or not installed in accordance with the EFCO Installation Manual
Guidelines.

for failure of insulated installation. construction. or or

moisture environments such as enclosures and nr<>N1hn1 EFCO does not assume

caused stresses from temperature differentials over the

The EFCO limited warranty excludes any caused to the material or finish due to

The EFCO limited \varranty excludes any for environmental hazards but not limited to mold.

limited warranty extends to EFCO manufactured as outlined in 502-90. test method A. Perimeter
EFCO limited warranty is based upon the
conditions. sealants, etc. are excluded from the EFCO limited warranty.

system itse!C it does not warrant the installation of the system.

EFCO will not be

EFCO

EFCO will not be or liable for any incidental, anyone as a

result of the use, or sale of defective or material.

warranty or usage of trade is disclaimed.

EFCO shall not be liable for back nor any work or materials anyone other than EFCO in connection with the
of an officer of EFCO
installed covered this warranty, except when authorized lhe

Materials will not be or until for in full.

The warranty sets forth all the ofEFCO EFCO will not be for any costs or

from remO\al. installation or reinsta!lation of any <>nl•_k,""''"" of defective parts at the EFCO

is the exclusive There are no other express or

19.l . 2 l 0/29/2007

I I a Pella Company

1000 County Road· Monett , MO 65708 • 800 .221.4169 ·Fa x: 417 .235.7313

EFCO CORPORATION

LIMITED WARRANTY

EFCO CORPORATION warrants to the first retail purchaser only, that all
articles, materials and work will be free from material defects in
manufacture. EFCO CORPORATION's liability extends only to its buyer and
is limited by the Terms and Conditions stated on the reverse side ofthis form.

EFCO CORPORATION's warranty on the product(s) shall extend from the
issue date as follows :

Glass Not Applicable
Window Not Applicable
Storefront 10 year(s)
Curtainwall 10 year(s)
Finish Not Applicable

EFCO CORPORATION excludes any implied warranties of
merchantability and fitness for a particular purpose.

EFCO's liability will not extend beyond repair or replacement of the defective
material. EFCO will not be responsible for any consequential damages
caused by its products.

There are no warranties which extend beyond the description on the face
hereof.

Job Name: FW PARKER SCHOOL NORTH WING Rep : 1205
EFCO Job No.: 7269702
Customer Name: FRONTRUNNER SYSTEMS

Issue Date: 2007-04-25

Architectural Window, Curtain Wall
Storefront Systems

See reverse side for additional terms and conditions.

____...., .,. ------···--·---. ---------------------
____________________ _________·-.._

Where windows are just the beginning.

PRODUCTS LIMITED WARRANTY

The limited warranty for INSULATED GLASS UNITS warrants the units will be free from obstruction of vision as a result of dust or

film formation on the internal surfaces caused failure of the hermetic seal due to defects in material or workmanship.

The limited warranty for BAKED-ON FLUROPOLYMER PAINT COATINGS warrants that paint finishes will not chip, crack, blister, or

EFCO does not warrant any paint finishes for filoform corrosion in Coastal environment.

Corrosion of any or component caused by exposure to salt atmosphere, acid rain, alkaline, or other extreme conditions is not covered.
EFCO disclaims all
for and with respect to any material which has been subject to abme, alteration, modification, neglect, misuse,

war, flood, or acts of God.

This aluminum surfaces peeling. checking, cracking, chalking, and change of

color, per or 61 l in force at the time of bidding. This limited warranty applies only when the

finish types recommended for the environment of the site are used. EFCO reserves the right to refinish defective

components in the field or at its sole discretion.

lf any material shall be found to be defective EFCO in material or such material shall be replaced or at the

of EFC:C), after a ""'~"""'»•nt of EFCO, and with the consent of EFCO, without

If after EFCO, it is determined the became defective under the conditions of this warranty, EFCO agrees to

material as EFCO.

for defects caused accidents, modifications to

reasonable and uc:•~c~~"' failure to follow instructions, and other
acts of na!ure. All ~"~'"''"~"from the
manufactured parts will be limited to the warranty and are
EFCO limited warranty.

EFCO shall not be liable for material rn or installation; or not installed in accordance with the EFCO Installation Manual
Guidelines.

for failure of insulated installation,

moisture environments such as enclosures and

caused stresses from temperature differentials over the

The EFCO limited warranty excludes any caused to the material or finish due to

The EFCO limited warranty excludes any for environmental hazards but not limited to mold.

The EFCO limited warranty extends to EFCO manufactured as outlined in 502-90. test method A. Perimeter

conditions, sealants, etc. are excluded from the EFCO limited warranty. The EFCO limited wammty is based upon the

system itself, it docs not warrant the installation of the system.

EFCO will not be

WHAT

or liable for any incidental, H""0'..c'''~" or collateral or for any expense incurred imyone as a

result of the use. or sale of defective or material.

from course of or usage of trade is excludi:d disclaimed.

EFCO shall not be liable for back nor any work or materials anyone other than EFCO in connecrion with the
of an officer of EFCO
installed coYered this warranty, except when authorized the

Materials will not be or until for in full.

ofEFCO EFCO will not be for any costs or

from removal, installation or reinstallation of any of defective parts at the EFCO

is the exclusive There are no other express or

l9. l 2 I0/29/2007

I I a Pella Company

1000 County Road • Monett, MO 65708 • 800.221 .4169 • Fax: 417.235.731 3

0

EFCO CORPORATION

LIMITED WARRANTY

EFCO CORPORATION warrants to the first retail purchaser only, that all
articles, materials and work will be free from material defects in
manufacture. EFCO CORPORATION's liability extends only to its buyer and
is limited by the Terms and Conditions stated on the reverse side of this form.

EFCO CORPORATION's warranty on the product(s) shall extend from the
issue date as follows:

Glass Not Applicable
Window Not Applicable
Storefront 10 year(s)
Curtainwall 10 year(s)
Finish Not Applicable

EFCO CORPORATION excludes any implied warranties of
merchantability and fitness for a particular purpose.

EFCO's liability will not extend beyond repair or replacement of the defective
material. EFCO will not be responsible for any consequential damages
caused by its products.

There are no warranties which extend beyond the description on the face
hereof.

Job Name: FW PARKER SCHOOL NORTH WING Rep: 1205
EFCO Job No.: 7269702
Customer Name: FRONTRUNNER SYSTEMS

Issue Date: 2007-04-25

u Architectural Window, Curtain Wall
Storefront Systems

See reverse side for additional terms and conditions.

-------------
Where windows are just the beginning.

PRODUCTS WARRANTY

The limited warranty for INSULATED GLASS UNITS warrants the glass units will be free from obstruction of vision as a result of dust or

film formation on the internal surfaces caused failure of the hermetic seal due to defects in material or workmanship.

The limited warranty for BAKED-ON FLUROPOLYMER PAINT COATINGS \Varrants that paint finishes will not chip, crack, blister, or

EFCO does not warrant any paint finishes for filoforn1 corrosion in Coastal environment.

Corrosion of any product or component caused exposure to salt atmosphere, acid rain, alkaline, or other extreme conditions is not covered.

EFCO disclaims all for and >vith respect to any material which has been subject to ablt'>e, alteration, modification, neglect, misuse,

war, flood. or acts of God.

This warranty covers aluminum surfaces against peeling, cracking, chalking, and

color, per applicable or 611 in force at the time of bidding. warranty applies

finish types recommended for the environment of the site are used. EFCO reserves the to refinish defective

components in the field or at its sole discretion.

WHATEFCO

If any material shall be found to be defcctiYe EFCO in material or such material shall be or at the option

of EFCO, after a n"ir".'"'" of EFCO, and with the consent of EFCO, without

If after EFCO, it is determined the became defective under the conditions of this warranty. EFCO agrees to

material as EFCO.

abuse.

reasonable and ne•:es:sairv
acts of nature. All

EFCO limited warranty.

EFCO shall not be liable for material u'°"">"'"'u rn or installation: or not installed in accordance with the EFCO Installation .rvlanual
Guidelines.

for failure of insulated units due to installation, construction, or or

mois1llre environments such as pool enclosures and n,.,,.,_,nhrn EFCO docs not assume

caused stresses from temperature differentials over the

The EFCO limited wammty excludes any caused to the material or finish due to

The EFCO limited warranty excludes any for environmental hazards but not limited to mold.

The EFCO limited warranty extends to EFCO manufactured as outlined in 502-90. test method A. Perimeter

conditions, are excluded from the EFCO limited warranty. The EFCO limited warranty is based upon the

system itself, it does not warrant the installation of the system.

for EFCO will not be

anyone as a

or usage of trade is excluded disclaimed.

EFCO shall not be liable for back nor any work or materials anyone other than EFCO in connection with the
of an officer of EFCO
installed covered this warranty, except when authorized the

Materials will not be or until for in full.

The warranty sets forth all the of EFCO will not be for any costs or

from removal, installation or reinstallalion of any of defective parts at the EFCO

is the exclusive There are no other express or

l9.l6 . 2 l0/29/2007

I I a Pella Company ---------------

1000 County Road· Monett, MO 65708 • 800 .221.4169 ·Fa x: 417 .235.7313

EFCO CORPORATION

LIMITED WARRANTY

EFCO CORPORATION warrants to the first retail purchaser only, that all
articles, materials and work will be free from material defects in
manufacture. EFCO CORPORATION's liability extends only to its buyer and
is limited by the Terms and Conditions stated on the reverse side of this form.

EFCO CORPORATION's warranty on the product(s) shall extend from the
issue date as follows:

Glass Not Applicable
Window Not Applicable
Storefront 10 year(s)
Curtainwall 10 year(s)
Finish Not Applicable

EFCO CORPORATION excludes any implied warranties of
merchantability and fitness for a particular purpose.

EFCO's liability will not extend beyond repair or replacement of the defective
material. EFCO will not be responsible for any consequential damages
caused by its products.

There are no warranties which extend beyond the description on the face
hereof.

Job Name : FW PARKER SCHOOL NORTH WING Rep: 1205
EFCO Job No. : 7269702
Customer Name: FRONTRUNNER SYSTEMS

Issue Date: 2007-04-25

Architectural Window, Curtain Wall
Storefront Systems

See reverse side for additional terms and conditions.

Where windows are just the beginning.

PRODUCTS WARRANTY

The limited warranty for INSULATED GLASS UNITS warrants the glass units will be free from obstruction of vision as a result of dust or

film formation on the internal glass surfaces caused failure of the hermetic seal due to defects in material or \vorkrnanship.

The limited warranty for BAKED-ON FLUROPOLYMER PAINT COATINGS warrants that paint finishes will not chip, crack, blister, or

EFCO does not warrant any paint finishes for filoform corrosion in Coastal environment.

Corrosion of any product or component caused by exposure to salt atmosphere, acid rain, alkaline. or other extreme conditions is not covered.

EFCO disclaims all liability for and with respect to any material which has been subject to abLLse, alteration, modification, neglect. misuse,

abnormal use, accident, fire, war, flood. or acts of God.

This warranty covers aluminum surfaces against cracking, chalking, and change of

color, per or 61 l in force at the time warranty applies wheu the

finish types recommended for the environment of the site are used. EFCO reserves the right to refinish defective

components in the field or at its sole discretion.

If any material shall be found to be defective EFCO in material or such material shall be or repaired at the

ofEFCO. after a of EFCO, and with the consent of EFCO. without

If after EFCO. it is determined the became defective under the conditions of this warranty, EFCO agrees to

material as EFCO.

reasonable and ""'·"J""' maintenance), fail me to follow

acts of nature. All manufactured parts will be limited to the warranty and are

EFCO limited warranty.

EFCO shall not be liable for material in or installation; or not installed in accordance with the EFCO Installation 1'v1anual
Guidelines.

for failure of insulated installation.

moisture environments such as enclosures and

caused stresses from temperature differentials over the

The EFCO limited warranty excludes any caused to the material or finish due lo

The EFCO limited warranty excludes any for environmental hazards but not limited to mold.

The EFCO limited warranty extends to EFCO manufactured outlined in 502-90. test method A. Perimeter
EFCO limited warranty is based upon the
conditions. sealants, etc. arc excluded from the El~co limited warranty.

system itself, it docs not warrant the installation of the system.

a EFCO will not be

or collateral or for any expense incurred anyone as a
excluded disclaimed.
result of the use, or sale of defective or

from course of

EFCO shall not be liable for hack nor any work or materials

installed covered this warranty, except when authorized the

Materials will not be or until for in full.

of EFCO EFCO will not he for any costs or

from removal, installation or reinstallation of any of defective parts at the EFCO

is the exclusive There are no other express or

19. l Rev. 2 l 0/29/2007

TI E I E'I •

936 larch Ave. I Elmhurst, IL 60126 Phone: 630.782.0180 I Fax: 630.782.0188

March 9, 2009

Berglund Construction Co.
111 East Wacker Drive
Suite 2450
Chicago IL 60601

RE: Subcontractor Guarantee I Warranty
506043-Francis W. Parker School North Wing Renovation
Scope of Work: Drywall

Gentlemen:

R.G. Construction Services, Inc. herewith guarantees that they and their subcontractors
and suppliers will repair or replace any and all defects in their material and workmanship
that may develop within one year from the date of 2/24/09 except where a longer period
of guarantee is called for in the specifications, with the exception of such defects as are
caused by abuse by the owner. R.G. Construction Services, Inc. will repair any work of
other trades which may be disturbed and damaged in making repairs to their work. R.G.
Construction Services, Inc. will also repair or restore to the satisfaction of the owner, any
part of the building, decoration or contents that may be damaged within the above
mentioned time by defects in the work. In addition, R.G. Construction Services, Inc. will
do any and all repairing or restoring that may be required as above described, promptly
upo11 receipt of ~w1ittc1111otice, ,"·vithout c·c;st, and' to the satisfaction of BERGLlJ1'~1D
CONSTRUCTION COMPANY.

Very truly yours,
R.G. Construction Services, Inc.

Robert Garcea Jr.
Secretary I Treasurer

Drywall Plastering Acoustical Carpentry

www.rgconstruction.com

() .:...:....:...:.:...:.....:..:....:.:..:..:.......:..:..:.:...:..:.....:...:...:..:..:...:......:..:...:.:...:..:.. CERAM IC
MOSAIC
LOWERY TILE COMPANY QUARRY

12335 S. KEELER AVE. • ALSIP, IL 60803 • PHON E: (708) 389-9200 • FAX: (708) 389-9209

Subcontractor Guarantee/Warranty

For

506043 - Francis W. Parker School North Wing Renovation

Subcontractor: Lowery Tile Company
12335 S. Keeler Ave.
Alsip, IL 60803

Scope of Work: Ceramic Tile
Date of Substantial Completion: February 24, 2009

We, the undersigned, herewith guarantee/warranty the Ceramic Tile Work against defects in
materials or workmanship or any nonconformity with the requirements of the contract
documents for a period of ONE (1) YEAR from the date of Substantial Completion.
If during the guarantee/warranty period, any faulty materials or defects in materials or
workmanship are found, we agree to promptly replace and repair them, together with any
damage to finish, fixtures, equipment, or furnishings due to our defective work upon
notification by the Architect or Owner at no additional expense to the Owner.

Printed Name: 1{(:{~,--~ ,

Title: ~/Z~~t~~_Z_M"' _~---

u

www.lowerytile .com

METROPOLITAN TERRAZZO, LLC

645 Lunt Avenue
Elk Grove Village, Illinois 60007
Tel: 847 434-0700 - Fax: 847 434-0704

Email: [email protected]

SUBCONTRACTOR GUARANTEE I WARRANTY

for
506043 - Francis W. Parker School North Wing Renovation

Subcontractor: Metropolitan Terrazzo, LLC
645 Lunt Ave.
Elk Grove Village, IL 60007-5014

Scope of Work: Terrazzo Flooring

Date of Substantial Completion: February 24, 2009

We, the undersigned, herewith guarantee I warranty the Terrazzo Flooring work against
defects in material or workmanship or any nonconformity with the requirements of the
contract documents for a period of ONE (1) YEAR from the date of Substantial
Completion.

If during the guarantee I warranty period, any faulty materials for defects in materials or
workmanship are found, we agree to promptly replace and repair them, together with
any damage to finish, fixtures, equipment, or furnishings due to our defective work upon
notification by the Architect or Owner at no additional expense to the Owner.

Signature:

Printed Name: Philip J. Phillips

Title: Vice President

Date: 3/3/2009

170 S. Gary Avenue • Carol Stream, IL 60188 • (630) 653-8111 • 1(800) 5-ARTLOW • Fax (630) 653-8171

April 6, 2009
Francis W. Parker North Wing Project

SUBCONTRACTOR GUARANTEE/WARRANTY

SUBCONTRACTOR: Artlow Systems, Inc.
170 S. Gary Avenue
SCOPE OF WORK: Carol Stream, IL 60188
DATE OF 61" FLOOR
SUBSTANTIAL COMPLETION: Flake System by Sika Flooring

FEBRUARY 24, 2008

We, the undersigned, herewith guarantee/wainnty the Resinous Flooring work against
defects in material or workmanship or any nonconformity with the requirements of the
Contract Documents for a period of one (1) year from the date of Substantial Completion.

If, during the guarantee/warranty period, any faulty materials or defects in materials or
workmanship are found, we agree to promptly replace and repair them, together with any
damage to finish, fixtures , equipment or furnishings due to our defective work upon
notification by the Architect or Owner at no additional expense to the Owner.

By: Randall S. Richter
Title: President
Signature:

u

"The Concrete Protectors"... Serving The Nation Since 1963

170 S. Gary Avenue • Carol Stream, IL 60188 • (630) 653-8111 • 1(800) 5-ARTLOW • Fax (630) 653-8171

April 6, 2009
Francis W. Parker North Wing Project

SUBCONTRACTOR GUARANTEE/WARRANTY

SUBCONTRACTOR: Artlow Systems, Inc.
170 S. Gary Avenue
SCOPE OF WORK: Carol Stream, IL 60188
DATE OF 6111 FLOOR
SUBSTANTIAL COMPLETION: Flake System by Sika Flooring

FEBRUARY 24, 2008

We, the undersigned, herewith guarantee/warranty the Resinous Flooring work against
defects in material or workmanship or any nonconformity with the requirements of the
Contract Documents for a period of one (1) year from the date of Substantial Completion.

If, during the guarantee/wainnty period, any faulty materials or defects in materials or
workmanship are found, we agree to promptly replace and repair them, together with any
damage to finish, fixtures , equipment or furnishings due to our defective work upon
notification by the Architect or Owner at no additional expense to the Owner.

By: Randall S. Richter
Title :
Signature: President

-2---.-1. 1'L.. -

(J

"The Concrete Protectors"...Serving The Nation Since 1963

- SINCE 1945 - MANUFACTURERS AND INSTALLERS OF ...

';~~~,'71ee1 Jif-Set, Elastex, Vinyl-Crete, Mag-Roe, Leinweber's
Liquid Latex, Rubberized Concrete and Floorsonic
( 'UNDERLAYMENT & FLOOR PREP CONTRACTORS

9812 S. Cicero Ave. • Oak Lawn, IL 60453 • (708) 424-7000 • FAX: 708/424-9914
Plant: 346 West 107th Place• Chicago, Illinois 60628 • (773) 568-7722

MEMBERS (ASTM) AMERICAN SOCIETY FOR TESTING MATERIALS

March 26, 2009

SUBCONTRACTOR GUARANTEE I WARRANTY

for

506043 - Francis W. Parker School North Wing Renovation

Subcontractor: F. H. LEINWEBER CO., INC.
9812 S. Cicero Avenue - Oak Lawn, IL 60453

Scope of Work: FLOOR PREPARATION

Date of Substantial Completion: February 24, 2009

We, the undersigned, herewith guarantee I warranty the FLOOR PREPARATION work
against defects in material or workmanship or any nonconformity with the requirements
of the contract documents for a period of ONE (1) YEAR from the date of Substantial
Completion.

If during the guarantee I warranty period, any faulty materials or defects in materials or
workmanship are found , we agree to promptly replace and repair them, together with
any damage to finish, fixtures, equipment, or furnishings due to our defective work upon
notification by the Architect or Owner at no additional expense to the Owner.

~'A"'' E. 8 E'J\> ,..

~ '-O

I -:

I u:::i: (,,0RPOR41'~A

Si nature: Lt1Alwe8c& - rALL()/J

Printed Name:

u Title:

Date:

"SERVING THE CONCRETE and FLOOR COVERING CONTRACTOR "

- SINCE 1945 - MANUFACTURERS AND INSTALLERS OF ..

'?. ~ ~ ~, '71ee, Jif-Set, Elastex, Vinyl-Crete, Mag-Roe, Leinweber's
Liquid Latex, Rubberized Concrete and Floorsonic
{)UNDERLAYMENT & FLOOR PREP CONTRACTORS

9812 S. Cicero Ave.• Oak Lawn, IL 60453 • (708) 424-7000 •FAX: 708/424-9914
Plant: 346 West 107th Place• Chicago, Illinois 60628 • (773) 568-7722

MEMBERS (ASTM) AMERICAN SOCIETY FOR TESTING MATERIALS

March 26, 2009

SUBCONTRACTOR GUARANTEE/WARRANTY

for

506043 - Francis W. Parker School North Wing Renovation

Subcontractor: F. H. LEINWEBER CO., INC.
9812 S. Cicero Avenue - Oak Lawn, IL 60453

Scope of Work: FLOOR PREPARATION
Date of Substantial Completion: February 24, 2009

We, the undersigned, herewith guarantee I warranty the FLOOR PREPARATION work
against defects in material or workmanship or any nonconformity with the requirements
of the contract documents for a period of ONE (1) YEAR from the date of Substantial
Completion_

If during the guarantee I warranty period, any faulty materials or defects in materials or
workmanship are found , we agree to promptly replace and repair them, together with
any damage to finish, fixtures, equipment, or furnishings due to our defective work upon
notification by the Architect or Owner at no additional expense to the Owner_

Si nature:
Printed Name:

u Title:

Date:

" SERVING THE CONCRETE and FLOOR COVERING CONTRACTOR "

Just Rite Acoustics, Inc.

1501 Estes Avenue• Elk Grove Village, IL 60007 •Phone: 847-357-8200 •Fax: 847-357-8280

Francis W. Parker School North Wing Renovation Closeout Documents
506043 March 2, 2009

Francis W. Parker School North Wing Renovation
BCC PROJECT #506043

SUBCONTRACTOR GUARANTEE I WARRANTY

Subcontractor: Dave Martin
Just Rite Acoustics, Inc
1501 Estes Avenue
Elk Grove Village, IL

Scope of Work: February 24, 2009
Date of Substantial Completion:

We, the undersigned, herewith guarantee/warranty the Acoustical Ceiling work against
defects in material or workmanship or any non conformity with the requirements of the
contract documents for a period of one year from the date of Substantial Completion.

If during the guarantee/warranty period, any faulty materials or defects in materials or
workmanship are found, we agree to promptly replace and repair them, together with any
damage to finish, fixtures, equipment, or furnishings due to our defective work upon
notification by the Architect or Owner at no additional expense to the Owner.

By: Dave Martin

Title: Project Manager

Signature:

0

Just caustics, Inc.

1501 Estes Avenue" Elk Grove Village, IL 60007" Phone: 847-357-8200" Fax: 847-357-8280

FrancisW. Parker School North Wing Renovation Closeout Documents
506043 March 2, 2009

Francis W. Parker School North Wing Renovation

BCC PROJECT #506043

SUBCONTRACTOR GUARANTEE/WARRANTY

Subcontractor: Dave Martin
Just Rite Acoustics, Inc
1501 Estes Avenue
Elk Grove Village, IL

Scope of Work: February 24, 2009
Date of Substantial Completion:

We, the undersigned, herewith guarantee/warranty the Acoustical Wall Panels work
against defects in material or workmanship or any non conformity with the requirements
of the contract documents for a period of one year from the date of Substantial
Completion.

If during the guarantee/warranty period, any faulty materials or defects in materials or
workmanship are found, we agree to promptly replace and repair them, together with any
damage to finish, fixtures, equipment, or furnishings due to our defective work upon
notification by the Architect or Owner at no additional expense to the Owner.

By: Dave Martin

Title: Project Manager

Signature:

INTRODUCTION REMEDY

Thank you for your recent purchase of CONWED Should the Wall or Ceiling Panels be other than as warranted
Designscape Wall or Ceiling panels.We believe we during the applicable warranty period, CONWED, at its sole
manufacture the highest quality wall and ceiling panels, and option, will repair or replace the defective components of
that is why we stand behind them with this warranty.Terms the Wall 01- Ceiling Panel as well as any other component
contained herein are subject to change without notice. which must also be repaired or replaced in order to properly
repair or replace the defective components. CONWED's
WHO IS COVERED obligation to pay, however; shall be subject to these limits:

The original consumer purchaser (i.e. the building owner. not I. Maximum repair or replacement cost to CONWED shall
the installer- or contractor) or the first transferee from the be the replacement cost of the defective component and
original put-chaser is entitled to the benefits of this warranty. will not include any labor charges.

TRANSFERABILITY OF THIS WARRANTY 2. The settlement, described above, or at the option of
CONWED its monetary equivalent, will be the only
You can transfer,this warranty one time, anytime during the remedy available to the Owner for defective components
life of the wa~ranty. For this warranty to be transferred the of the Panels.

Owner must cdmplete and return the Warranty Transfer NOTIFICATION OF CLAIMS

within sixty,(60);pays after the date of the real estate transfer Claims pursuant to this Warranty must be submitted in
to obtain tQE:.~henefits of this warranty. AFTER YOU HAVE writing together with proof of purchase, installation date
TRANSFER.~.ED THIS WARRANTY TO THE PURCHASER and defect, to CONWED Designscape 800 Gustafson Road,
OFYOURPROPERTY, IT MAY NOT BETRANSFERRED Ladysmith, WI, 54848, within 30 days after discovery of the
alleged defect. Within 30 days after receipt of the written
AGAlf'J.'"f:HAT IS.THE PURCHASER OFYOUR PROPERTY claim, a CONWED representative will contact the Owner
to investigate the claim. Call 1-800-932-2383 for more
MAY ~@TTRANSFER THIS WARRANTY TO ANY information regarding the CONWED Wall Panel warranty
administration.
SUBSEQLJENT PURCHASERS.
LIMITATIONS
HOW/LONG YOU ARE COVERED
ANY IMPLIED WARRANTY, INCLUDING WARRANTY
C~,0WED Wall and Ceiling Panels are covered by aTHREE OF FITNESS FORA PARTICULAR USE OR PURPOSE,
AND WARRANTY OF MERCHANTABILITY, IS LIMITED IN
rn~year limited warranty. Diffusers will also be covered by a DURATIONTOTHE EXPRESS WARRANTY PROVIDED
Tl?JREE (3) year limited warranty. HEREIN UNLESS A SHORTER PERIOD IS PERMITIED
BY LAW, CONWED SHALL NOT BE LIABLE FOR
WHAT IS COVERED INCIDENTAL OR CONSEQUENTIAL DAMAGES OR
FOR DAMAGE TO THE BUILDING, ITS CONTENTS
We warrant that your CONWED Wall or Ceiling panels OR ITS OCCUPANTS.THIS WARRANTY CONTAINS
are free from any manufacturing defects in material or- ALL OF THE PROVISIONS OF YOUR REMEDIES FROM
workmanship. CONWED. LIABILITY IS LIMITED TO THE PROVISION OF
THISWARRANTY,WHETHERANY CLAIM AGAINST IT IS
WHAT IS NOT COVERED BASED UPON STRICT LIABILITY, NEGLIGENCE, BREACH
OFWARRANTY OR ANY OTHER THEORY OR CAUSE
This wan-anty does not cover any problems with non- OF ACTION.
defective panels caused by conditions or handling beyond
our control. Some examples of conditions not covered by Some states do not allow limitations of how long an implied
this warranty include: warranty lasts or the exclusion of incidental or consequential
damages, so the above limitations or exclusions may not apply to
I. Acts of God, fire, flood, exposure to chemicals, physical you.This warranty gives you specific legal rights and you may also
abuse or misuse, improper installation. have other rights which vary from state to state.

2. Failure to store panels in a clean, dry area, enclosed and

protected from the elements such as raih,snow and

· direct sunlight. ...

3. Panels being installed or stored in areas ha'1ing extreme
temperature or humidity (above 80% humidity or
I00 degrees F).

4. Normal wear and tear or from exposure Jo smoke,

fumes, leaks or abuse. ·

5. Alterations made after completion of the i11stallation,
including but not limited to, painting or application of
cleaning solutions, coatings or other modifications.

6. Any Labor Charges. CDC CORPORATION, LLC
800 Gustafson Road
7. Any costs that you incur that are not authorized in Ladysmith, Wisconsin 54848

advance by CONWED. · 1-800-932-2383
www.conweddesignscape.com
INNOVATIONS FOR LIVING"

Pub. No. 57861-8. Printed in U.S.A. October2007. ©2007 Owens Corning.

}NSrranty, Installation and @mstrong
Maintenance Information

( LIMITED WARRANTY Prior to installation, the ceiling product must be red rust as defined by ASTM 8117 test
Please read the following terms carefully, kept clean and dry and below 120° F (49°C). procedures, for fifteen (15) years from the date
as they are affected by the Installation of installation (except for obvious defects In
You must notify Armstrong of any product
conditions. Armstrong does not assume nor failure covered by this warranty within 30 materials or factory workmanship, of which ·
does it authorize any person to assume or days of first observation of failure by writing
extend on its behalfany other warranty to the following address: Armstrong World Armstrong must be notified within 30 days of
obligation or liability. Industries, Inc. Post Office Box 3001, ·
the date of installation). This limited warranty is
subject to further conditions outlined below.

Prior to installation, the ceiling product must be Lancaster, Pennsylvania 17604, or call us at All ceiling products shall be installed In
kept clean and dry and below 120° F (49°C)
and not subject to any of the Abnormal 1 877 ARMSTRONG. Subject to confirmation accordance with Armstrong specifications in · .
Conditions set out above.
by Armstrong of such product failure, effect at the.time of Installation for HumiGuard
This exoress warranty constitutes the entire Plus ceilings and PRELUDE XL, PRELUDE ML,
Armstrong will deliver, at Armstrong's expense, PRELUDE XL Fire Guard, SUPRAFINE XL,
obligation of Annstrong World Industries. Inc.. SUPRAFINE ML, SUPRAFINE XL Fire Guar.d,
F.O.B., to the place of installation, new ceiling
and there are no other warranties expressed PRELUDE PLUS XL Fire Guard, PRELUDE XL
or Implied, includjng any warranty of panels and/or an installation system, of the

same or similar type and grade, In an amount

merchantabilltv or fitness for any purpose equal to that which is determined to be 360 Painted, SILHOUEITE XL 1/4" and 1/8"
defective. reveal, AXIOM™, AXIOM-PROFILED,
whatsoever. Liabiljty Is limited to the above.
FINE FISSURED Ceramaguard PRELUDE Concealed, CONCEALED Z-bar,
Extruded Aluminum CLEAN ROOM,
and Armstrong Worfd Industries. Inc.. shall
in no event be liable for incidental or HumiGuard Max Ceilings Ten (10) Years Hot-Dipped Galvanized CLEAN ROOM,
INTERLUDE™, SONATA™, SERPENTINA™,
consequential damages.
Armstrong Commercial Ceiling products with TRIMLOK~, and DRYWALL grid system

Please Note: Some jurisdictions do not HumiGuard Max performance are warranted to components that are supplied with a hot-
allow exclusion or limitation of incidental or be free from defects in materials or factory dipped galvanized coating or aluminum
workmanship, or saggin9 and warping as a base material. This warranty also covers
consequential damages or llmjtations on how result thereof, for ten (10) years from the date AL PRELUDE PLUS and SS PRELUDE PLUS
long an implied warranty lasts. so the above of installation (except for obvious defects in suspension systems.
limitation or exclusion may not apply to you. materials or factory workmanship, of which
Armstrong must be notified within 30 days of installation of the products shall be carried
Reference to Armstrong In this section shall the date of installation). This limited warranty is
mean, for the United States: Armstrong World subject to further conditions outlined below. out where the temperature does not exceed
Industries Inc., Armstrong Building Products,
P.O. Box 3001, Lancaster, PA 17604; and All ceiling products shall be installed in 120° F (49°C). It Is not necessary for the area
shall mean, for Canada: Armstrong Worfd accordance with Armstrong specifications in
Industries Canada Ltd., Armstrong Building effect at the time of installation. to be enclosed or for HVAG systems to be
Products, 6911 Decarie Blvd., Montreal,
Quebec H3W 3E5. Installation of the products shall be carried functioning. Such installations shall not be
out where the temperature does not exceed
LIMITED WARRANTY TERMS 120° F (49°C). It is not necessary for the area exposed to Abnormal Conditions, namely:
to be enclosed or for HVAG systems'to be ·
HumlGuard Max Ceilings and Armstrong chemical fumes, vibrations, presence of
functioning. HumlGuard Max's sag performance
standing water, or moisture coming into

direct contact with the ceiling, such as could

result from building leaks or condensation.

These products car.mot be used in exterior

applications. ·

Suspension Systems Fifteen (15) Years warranty includes _installations of the pi-oduct Armstrong treats these mineral fiber

Armstrong Commercial Suspension Systems where the celling product is exposed to acoustical celling products with a mold-
(listed below) and Commercial Ceiling products chemical fumes, extreme temperatures up to inhibiting or retarding agent. However, if the
with HumiGuard Max performance, when 120° F (49°C) Qncluding steam up to 275° F product is Installed In, or subsequent to
installed together, are warranted to be free (135°C)) and relative humidity of 100%, installation is exposed to, Abnormal Conditions
from defects in materials or factory work- including swimming pools and other standing (as referred to above), continued mold-
manship, or sagging and warping as a result water applications so long as the product is inhibiting performance cannot be assured.
thereof, and against the occurrence of 50% installed with either SS PRELUDE PLUS, AL The growth of mold is not covered by this
red rust as defined by ASTM 8117 test PRELUDE PLUS or PRELUDE PLUS XL Fire warranty nor is it the responsibility of
procedures, for fifteen (15) years from the date Guard suspension systems. Note: fQr_ Armstrong.
of installation (except for obvious defects in swimming pools, install only with AL PRELUDE
materials or factory workmanship, of which PLUS Suspension systems. Damage that may If subject to Abnormal Conditions, the products
Armstrong must be notified within 30 days of occur from vibrations is not covered by this should be removed and replaced once the
the date of installation). This limited warranty is warranty. conditions of the Installation are normal.
subject t"further conditions outlined below.
The ceiling product must not be used to The ceiling product must not be used to
Alf ceiling products shall be installed in support any other material except fiberglass
accordance with Armstrong specifications in thermal/sound control insulation installed In the support any other material except fiberglass
effect at the time of installation for HumiGuard thickness, density and manner according to
Max ceilings and PRELUDE® XL, PRELUDE Armstrong Sflecifications. thermal/sound control insulation installed in the
ML, PRELUDE XL Fire Guard, PRELUDE
PLUS XL Fire Guard, AL PRELUDE PLUS and Prior to installation, the ceiling product must be thickness, density and manner according to
SS PRELUDE PLUS. kept clean and dry and below 120° F (49°C).
Armstrong specifications. .
You must notify Armstrong of any product
Prior to installation, the ceiling product must be
kept clean and dry and below 1200 F (49°C)
and not subject to any of the Abnormal
Conditions set out above.

Installation of the products shall be carried failure covered by this warranty within 30 days You must notify Armstrong of any product
of first observation of failure by writing to the failure covered by this warranty within _30 days
out where the temperature does not exceed following address: Armstrong World Industries, of first observation of failure by writing to the
Inc. Post Office Box 3001, Lancaster, following address: Armstrong World Industries,
120° F (49°C). It is not necessary for the area Pennsylvania 17604, or call us at Inc. Post Office Box 3001, Lancaster,
1 877 ARMSTRONG. Subject to confirmation Pennsylvania 17604, or call us at
to be enclosed or for HVAC systems to be by Armstrong of such product failure, 1 877 ARMSTRONG. Subject to confirmation
Armstrong will deliver, at Armstrong's by Armstrong of such product failure, .
functioning. HumiGuard Max's sag performance expense, F.O.B., to the place of installation, Armstrong wlll deliver, at Armstrong's
new ceiling panels, of the satne or similar type expense, F.O.B., to the place of installation,
warranty includes installations of the product and grade, in an amount equal to that which new ceiling panels and/or an installation
is determined to be defective. system, of the same or similar type and
where the ceiling product is exposed to grade, in an· amount equal to that which is
FINE FISSURED Ceramaguard determined tci be defective.
chemical fumes, extreme temperatures up to
HumiGuard Plus Ceilings and Armstrong ARMATUFF, CLEAN ROOM MYLAR,.CLEAN
120° F (49°C) Oncluding steam up to 275° F Suspension Systems Fifteen {15) Years ROOM VL/VL, CROSSGATE, DUNE, DUNE
Second Look, *FINE FISSURED, FINE
(135°C)) and relative humidity of 100%, ~strong Commercial Suspension· Systems FISSURED Fine Look, *FINE FISSURED
Q1sted below) and Commercial Ceiling products Open Plan, FINE FISSURED Second Look,
including swimming pools and ·other standing with HumiGuard Plus performance, when *GEORGIAN, School Zone FINE FISSURED,
installed together, are warranted to be free
water applications so long as the product is from defects in materials or factory work- TUNDRA, ULTIMA, ULTIMA Vector, *As
manship, or sagging and warping as a result
installed with either SS PRELUDE PLUS, AL thereof, and against the occurrence of 50% designated In the Product Catalogue;

PRELUDE PLUS or PRELUDE PLUS XL Fire
Guard suspension systems. Note: fQr.

swimming pools. install only with AL PRELUDE

PLUS Sus1;>ension systems. Damage that

may occur from vibrations is not covered by

this warranty. .

The ceiling product must not be used to
support any other material except fiberglass
thermal/sound control insulation installed in the
thickness, density and manner according to
Armstrong specifications.

,,

Warranty, Installation and Maintenance lnformati6n

Fiberglass Ceilings with HumiGuard Plus OPTIMA Open Plan, OPTIMA Plank, years from the date of installation (except for (
Perfonnance and Armstrong Suspension OPTIMA Vector, PAINTED NUBBY Open obvious defects in materials or factory
Systems Fifteen (15) Years Plan, PEBBLE, RANDOM FISSURED, workmanship, of which Armstrong must be
SHASTA, STONEBROOKE notified within 30 days of the date of
Armstrong Commercial Suspension Systems installation). This limited warranty is subject
(listed below) and Commercial Ceiling products HumiGuard Plus Ceilings Ten (10) Years to further conditions outlined below.
with HumiGuard Plus performance, when
installed together, are warranted to be free Armstrong Commercial Ceiling products with All ceiling products shall be installed in
from defects In materials or factory. work- accordance with Armstrong specifications in
HumiGuard Plus performance are warranted to effec~ at the time of installation.
manship, or sagging and warping as ·a result be free from defects in materjals or factory
Installation of the products shall be carried
thereof, and against the occurrence of 50% workmanship, or saggin9 and warping as a out where the temperature does not exceed
result thereof, for ten (10) years from the date 120° F (49°C). It is not necessary for the area
red rµst as defined by ASTM B117 test of installation (except for obvious defects in to be enclosed or for HVAC systems to be
materials or factory workmanstiip, of which functioning. Such installations shall not be
procedures, for fifteen· (15) years fr~m the date Armstrong must be notified w~in 30 days of exposed to Abnormal Conditions, namely;
of installation (except for obvious defects in the date of installation). This limited warranty is chemical fumes, vibrations, presence of
materials or factory workmanship, of which subject to further conditions outlined below. standing water, or moisture coming into direct
Armstrong must be notified within 30 days of contact with the ceiling, such as could result
the date of installation). This limited warranty is All ceiling products shall be installed in from building leaks or condensation. These
subject to further conditions outlined below. accordance with Armstrong specifications in products cannot be used in exterior
effect at the time of installation. applications.
All ceiling products shall be installed in
accordance with Armstrong specifications in Installation of the products shall be carried If the product is installed in, or subsequent to
effect at the time of installation for HumiGuard out where the temperature does not exceed installation is exposed to, Abnonnal Conditions
Plus ceilings and PRELUDE XL, PRELUDE ML, 120° F (49°C). It is not necessary for the area (as referred to above), then It may support the
to be enclosed or for HVAC systems to be growth of mold and mildew. The growth of
PRELUDE XL Fire Guard, SUPRAFiNE XL, functioning. Such installations shall not be mold is not covered by this warranty nor is it
exposed to Abnormal Conditions, namely: the responsibility of Armstrong.
SUPRAFINE ML, SUPRARNE XL Fire Guard, chemical fumes, vibrations, presence of
PRELUDE PLUS XL Fire Guard, PRELUDE XL standing water, or moisture coming into direct If subject to Abnormal Conditions, the products
360 Painted, SILHOUEITE XL 1/4" and contact with the ceiling, such as could result should be remov~ immediately and replaced
1/8" reveal, AXIOM™, AXIOM-PROFILED, from building leaks or condensation. These once the conditions of the installation are normal.
PRELUDE Concealed, CONCEALED Z-bar, products cannot be used in exterior
Extruded Aluminum CLEAN ROOM, Hot- applications. The ceiling product must not be used to
Dipped Galvanized CLEAN ROOM, support any·other material except fiberglass
INTERLUDE™, SONATA™, SERPENTINA™, Armstrong treats .these mineral fiber thermal/sound control insulation Installed in the
TRIMLOK(!I, and DRYWALL grid system thickness, density and manner according to
components that are supplied with a hot- aco!Jsticat ceiling Products ~:~!i\ mold , Armstrong specijjcations. Mineral Fiber ceilings
dipped galvanized coating·or aluminum products cari be placed directly on top of
base material. This warranty· also covers· · inhib~ing.or~jng.agent•.Howeyer, if the Optima OpenPlan ceilings where approved by
AL PRELUDE PLUS and SS PRELUDE PLUS Prod1Jqt is)nstaJI~ .!n, or: subsequeyntto . , Armstrong;(to achieve acoustical performance).
- ~uspension systems. installation,is\~pgsed .to, :Abn9J:rnal: Conditions
.(EIS ~~q1tp,a,l:lq;v.e); .continued mold- . Prior to installation, the ceiling product must be
Installation of the products shall be carried inhib~ng, performance. cannot be .assured. kept clean and dry and below 1200 F (49°C)
·out where the temperature does not exceed · The growth of.mold is not covered by this
· ·120° F (49°C). ltis not necessary for thE! area warranty nor is it the responsibility of · and not subject to any of the Abnormal
to be enclosed or for HVAC systems to be Armstrong.
functioning. Such installations shall not be Conditions set out above.
exposed to Abnormal Conditions, namely; If subject to Abnormal Conditions, the products
chemical fumes, vibrations, presence of should be removed immediately and replaced You must notify Armstrong or any product
·standing water, or moisture coming Into direct once the conditions of the installation are normal. failure covered by this warranty within 30 days
contact with the ceiling, such as could result of first observation of failure by writing to the
. from building leaks or condensation. These The ceiling product must not be used to following address: Armstrong World Industries,
products cannot be used in exterior support any other material except fiberglass Inc. Post Office Box 3001, Lancaster;
applications. thermal/sound control insulation installed in the Pennsylvania 17604, or call us at
thickness, density and manner according to 1 877 ARMSTRONG. Subject to cor:ifirmation
If the product is installed in, or subsequent to Armstrong specttications. by Armstrong of such product failure,
installation is exposed to, Abnormal Conditions Armstrong will deliver; at Armstrong's
(as referred to above), then It may support the Prior to installation, the ceiling product must be expense, F.O.B., to the place of installation,
growth of mold. The growth of mold is not kept clean and dry and below 120° F (49°C) new ceiling panels~ of the same or similar
covered by this warranty nor is it the and not subject to any of the Abnormal · type and grade, in an amount equal to that
responsibllity of Armstrong. Conditions set out above. which is determined to be defective.

If subject to Abnormal Conditions, the products You must notify Armstrong of any product OPTIMA Open Plan, OPTIMA Plank,
should be removed immediately and replaced failure covered by this warranty within $0 days OPTIMA Vector, PAINTED NUBBY Open
once the conditions of the installation are normal. of first observation of failure by writing to the Plan, PEBBLE, RANDOM FISSURED,
following address: Armstrong World Industries, SHASTA, STONEBROOKE
The ceiling product must not be used to Inc. Post Office Box 3001, Lancaster,
support any other material except fiberglass Pennsylvania 17604, or call us at CIRRUS™ HumiGuard Plus Ceilings
thermal/sound control insulation Installed in the 1 877 ARMSTRONG. Subject to confirmation Ten (10) Years
thickness, density and manner according to . by Armstrong of such product failure,
Armstrong specifications. Mineral Fiber callings Armstrong will deliver; at Armstrong's Armstrong CIRRUS Commercial Ceiling
products can be placed directly on top of expense, F.O.B., to the place of installation, products with HumiGuard Plus performance
Optima Open Plan ceilings where approved by new ceiling panels, of the same or similar are warranted to be free from defects in
Armstrong (to achieve acoustical performance). type and grade, in an amount equal to that materials or factory workmanship, or sagging
which is determined to be defective. and warping as a result thereof, for ten (1 O)
Prior to installation, the ceiling product must be years from the date of Installation (except for
kept clean and dry and below 120° F (49°C) ARMATUFF, CLEAN ROOM MYLAR, CLEAN obvious defects in materials or factory
and not subject to any of the Abnormal ROOM VLJVL, CROSSGATE, DUNE, DUNE workmanship, of which Armstrong must be
Conditions set out above. Second Look, *FINE FISSURED, FINE notified within 30 days of the date of.
FISSURED Fine Look, *FINE FISSURED installation). This limited warranty is subject
You must notify Armstrong of any product Open Plan, FINE. FISSURED Second Look, to further conditions outlined below.
failure covered by this warranty within 30 days *GEORGIAN, School Zone FINE FISSURED,
of first observation of failure by writing to the TUNDRA, ULTJMA, ULTIMA Vector, *As All ceiling products shall be installed in
following address: Armstrong World Industries, designated in the Product Catalogue accordance with Armstrong specifications in
Inc. Post Office Box 3001, Lancaster; effect at the time of Installation.
Pennsylvania 17604, or call us at Fiberglass Ceiling with HumiGuard Plus
1 877 ARMSTRONG. Subject to confirmation Performance Ten (10) Years lnstEillation of the products shall be carried
by Armstrong of such product failure, out where the temperature does not exceed
Armstrong will deliver; at Armstrong's Armstrong Commercial Fiberglass Ceiling 120° F (49°C). It is not necessary for the area
expense, F.O.B., to the place of installation, products with HumiGuard Plus performance to be enclosed or for HVAC systems to be
new ceiling panels and/or an installation are warranted to be free from defects in functioning. Such installations shall not be
system, of the same or similar type and materials or factory workmanship, or sagging exposed to Abnormal Conditions, namely:
grade, in an amount equal to that which is and warping as a result thereof, for ten (10)
determined to be defective.

@mstrong

·'·

~ ··-. chemical fumes, vibrations, presence of CIRRUS standard ceilings that are not treated performance cannot be assured. The growth of
standing water, or moisture coming into direct with a mold-inhibiting coating and installed in, mold·is not coverE)d by this warranty nor is it
( contact with the ceiling, such as could result or subsequent to installation are exposed to, the responsibilitY of Armstrong.
from building leaks or condensation. These
I -. products cannot be used in exterior abnormal conditions (as referred to above) may Mineral fiber acoustical products that are not
applications. treated with a mold-inhibiting coating and
support the growth of mold. The growth of installed in, or subsequent to installation are
Armstrong treats thes.e mineral fiber products mold is not covered by this warranty nor is it exposed to, abnormal conditions (as referred
with a mold inhibiting or retarding ·agent. the responsibilitY of Armstrong. to above) may support the growth of mold and
However, if the product is installed in, or mildew. The growth of mold is not covered by
subsequent to installation is exposed to, If subject to Abnormal COnditions, the products this warranty nor is it the responsibility of
abnormal conditions as referred above, should be removed immediately and replaced Armstrong.
continued mold-Inhibiting performance cannot once the conditions of the installation are normal.
be assured. The growth of mold is not covered The warranty is void if the ceiling product is
by this warranty nor is it the responsibility The ceiling product must not be used to installed on furring strips or installed by nailing
of Armstrong. support any other material except fiberglass or stapling or if any adhesive is used in the
thermal/sound control insulation installed in the installation process. This warranty does not
If subject to Abnormal Conditions, the products thickness, density and manner according to extend to any component of the suspension
should be removed immediately and replaced Armstrong specifications. system such as, but not limited to, the metal
once the conditions of the installation are normal. grid or any other accessory used in the
Prior to installation, the ceiling product must be installation of the ceiling product.
The ceiling product must not be used to kept clean and dry in an environment that is
support any other material except fiberglass between 32° F (0°C) and 86° F (300C) and not The ceiling product must not be used to
thermal/sound control insulation installed in the subject to any of the Abnormal Conditions set support any other material except fiberglass
out above. thermal/sound control insulation installed in the
tt-iic-kne..."S, density and manner according to thickness, densjty and manner according to
You must notify Armstrong of any product Armstrong specifications.
Armstrong specifications. failure covered by this wai-ranty within 30 days
of first observation of failure by writing to the Prior to installation, the ceiling product must be
Prior to installation, the ceiling product must be following address: Armstrong World Industries, kept clean and dry in an environment that is
kept clean and dry and below 120" F (49°C} Inc. Post Office Box 3001, Lancaster, between 32° F (OOC) and 86° F {30°C) and not
and not subject to any of the Abnormal Pennsylvania 17604, or call us at subject to any of the Abnormal Conditions set
Conditions set out above. 1 877 ARMSTRONG. Subject to confirmation out above.
by Armstrong of such product failure,
You must notify Armstrong of any product Armstrong will deliver, at Armstrong's You must notify Armstrong of any product
failure covered by this warranty within 30 days expense, F.O.B., to the place of installation, failure covered by this warranty within 30 days
of first observation of failure by writing to the new ceiling panels, of the same or similar offirst observation of fallure by writing to the
following address: Armstrong World Industries, type and grade, in an amount equal to that following address: Armstrong World Industries,
Inc. Post Office Box 3001, Lancaster, which is determined to be defective. Inc. Post Office Box 3001, Lancaster,
Pennsylv~Ja 17604, or call us at Pennsylvania 17604, or call us at
1 877 ARM$TRONG. Subject to confirmation *CIRRUS, CIRRUS Borders, CIRRUS Classic 1 877 ARMSTRONG. Subject to confirmation
by Armstr.QQg of such product failure, Motifs, *CIRRUS Open Plan, *CIRRUS by Armstrong of such product failure,
Armstrongfwlll deliver, at Armstrong's - Profiles, CIRRUS Second Look, CIRRUS Armstrong will deliver, at Armstrong's
expense; EO.B., to the place of installation, Themes, *As designated In the Product expense, F.O.B., to the place of installation,
new ceilintlii:ianels, of the same or similar Catalogue new ceiling panels, of the same or similar
type and:grade, in an amount equal to that type and grade, in an amount equal to that
which is d~~ermined to be defective. Mineral Fiber Ceilings One {1) Year which Is determined to be defective.

*CIRRUS,:"CIRRUS Open Plan, *CIRRUS Armstrong Commercial Mineral Flber CORTEGA, CORTEGA Second Look,
Profiles, *A$ designated in the Product Acoustical Ceiling products with "standard" DESIGNER, DESIGNER Second Look,
sag resistance are warranted to be free from *FINE FISSURED, *FINE FISSURED Open
CataloguEt., '. defects in materials or factory workmanship, Plan, FISSURED, *GEORGIAN, GRAPHIS,
or sagging and warping as a result thereof, for LAmUDES, LEDGES, NATURAL FISSURED,
CIRRUSn:{Standard Ceilings Ten (10) Years one {1) year from the date of in§rtallatlon SANSERRA, TERRAIN, TRACES, SOFr
(except for obvious defects in materials or LOOK, STRATUS, TINCRAFT, *As
Armstrong CIRRUS Commercial Ceiling factory workmanship, of which Armstrong designated in the Product Catalogue
products with "standard" sag resistance are must be notified within 30 days of the date of
warranted to be free from defects in materials installation). This limited warranty is subject to I-ceilings Antenna Panels Five {5) Years
or factory workmanship, or sagging and further conditions outlined below.
warping as a result thereof, for ten {10} years Armstrong's I-ceilings Antenna Panels are
from the date of installation (except for obvious All ceiling products shall be installed in warranted to be free from defects in materials
defects in materials or factory workmanship, accordance with Armstrong specifications in or factory workmanship for a period of five (5)
of which Armstrong must be notified within effect at the time of installation. years from the date of shipment to the cus-
30 days of the date of installation). This limited tomer {except for obvious defects in.materials
Installation of the products shall be carried or factory workmanship, of which Armstrong
warranty is subject to further conditions out where the temperature is between 32° F must be notified within 30 days of the date of
(0°C) and 86° F {30°C). These temperature shipment to the customel). This limited warranty
outlined below. conditions must be met throughout the lifetime is subject to further conditions outlined below.
of the warranty. It is necessary for the area to
All ceiling products shall be installed in be enclosed and for the HVAC systems to be All i-ceiling Antenna Panels shall be installed
accordance with Armstrong specifications in functioning and in continuous operation. and used in accordance with Armstrong
effect at the time of installation. Such installations shall not be exposed to specifications In effect at the time of
Abnormal Conditions, namely: chemical fumes, installation.
Installation of the products shall be carried vibrations, presence of standing water, or
out where the temperature is between 32° F moisture coming into direct contact with the Installation of the i-ceilings Antenna Panels
(0°C) and 86° F (30°C). These temperature ceiling, such as could result from building leaks shall0 be carried out \I/here the temperature is
conditions must be met throughout the lifetime or condensation. These products cannot be between 32° F (0°C} and 86° F (30"C}. These
of the warranty. It is necessary for the area to used in exterior applications. temperature conditions must be met through-
be enclosed and for the HVAC systems to be out the lifetime of the warranty. It is necessary
functioning and in continuous operation. If the product is installed in, or subsequent to for the area to be enclosed and for the HVAC
installation is exposed to, Abnormal Conditions systems to be functioning and in continuous
Such installations shall not be exposed to (as referred to above), then it may support the operation. Such installations shall not be
growth of mold. The growth of mold is not exposed to Abnormal Conditions, namely:
Abnormal Conditions, namely: chemical fumes, covered by this warranty nor is it the chemical fumes, vibrations, presence of
vibrations, presence of standing water, or .responsibility of Armstrong. standing water, o~ moisture coming into direct
moisture coming into direct contact with the contact with the ceiling, such as could result
ceiling, such as could result from building leaks If subject to Abnormal Conditions, the products from building leal<s 6r ·condensation. i-cefiings
or condensation. These products cannot be should be removed immediately and r(:lplaced Antenna Panels cannot be used in exterior
used in exterior applications. once the conditions of the installation are.normal. applications.

Armstrong treats some of these mineral fiber Armstrong treats some of these mineral fiber Armstrong will not be responsible for defects
acoustical ceiling products {as designated in products (as designated in the catalog) with a caused by improper or unreasonable use,
the catalog) with a mold inhibiting or retarding mold inhibiting or retarding agent. However, if misuse of the antenna module and/or the
agent. However, if the product is installed in, or the product is installed in, or subsequent to
subsequent to installation is exposed to, installation is exposed to, abnormal conditions
abnormal conditions as referred above, as referred above, continued mold-inhibiting
continued mold-inhibiting performance cannot
be assured. The growth of mold is not covered
by this warranty nor is it the responsibility of
Armstrong.

Warranty, Installation and Maintenance Information

mounting assembly, water Intrusions, lightning, If an i-ceilings Speaker Panel is installed in, or Electronic units returned and found to be (
or malfunctions when panels have been subsequent to Installation is exposed to, defective, in Armstrong's sole judgment, will
modified or operated in excess of their rated Abnormal Conditions (as referred to above), either be replaced (replacement products may
capacities, altered, serviced, or Installed in an then it may support the growth of mold. The be remanufactured or reconditioned devlces)
other than workman-like manner. growth of mold is not covered by this warranty or repaired without charge. The replaced or
nor is it the responsibility of Armstrong. repaired electronic unit is warranted for the
If an i-ceilings Antenna Panel Is installed In, or remainder of the original warranty period.
subsequent to installation Is exposed to, If subject to Abnormal Conditions, the
Abnormal Conditions (as referred to above), I-ceilings Speaker Panel should be removed INFUSIONS Accent Canopies
then it may support the growth of mold. The immediately and replaced once the conditions
growth of mold is not covered by this warranty of the installation are normal. Armstrong Infusions Canopies are warranted to
no~ _is it the responsibility of Armstrong. be free from defects In materials or factory
The Speaker Panel must not be used to workmanship for one year from the date of
Exposure 'to Abnormal Conditions leads support any other material except for a installation (except for obvious defects in
to degradation failure modes, caused by TRI-PAK TS-11 Oelectronics unit installed in the materials or workmanship, of which Armstrong
corrosion of the element or the solder joint manner according to Armstrong specifications must be notified within 30 days of the date of
rendering the antenna non-functional. or for mineral fiber installed for fire resistive Installation). This limited warranty is subject to
assembly purposes in the thickness, density further conditions outlined below.
If subject to Abnormal Conditions, the and manner according to Armstrong
I-ceilings Antenna Panel should be removed specifications. The plastic panels, translucents and polygal
immediately and replaced once the conditions can be damaged by exposure to high
of the installation are normal. This warranty Is void if the label bearing the temperatures. Panel temperature should not be
Speaker Panel's date of manufacture is permitted to exceed 100° F after the tensioning
The Antenna Panel must not be used to removed or defaced. cables have been installed. infusions panels
are not approved for exterior application.
support a11y otl'ier material except fiberglass You must notify Armstrong of any I-ceilings Installation must be completed in accordance
Speaker Panel failure covered by this warranty with the Installation instructions provided by
thermaVsound control insulation installed in the within 30 days of first observation of failure by Armstrong. (Contact 1-877-276-7876 for an
thickness, density and manner according to writing to the following address: Armstrong additional copy or visit the commercial
Armstrong specifications. World Industries, Inc. Post Office Box 3001, ceilings website at arrnstrong.com) The
Lancaster, Pennsylvania 17604, or call us at Infusions canopy cable hanging system Is
The warranty also excludes damage to 1 877 ARMSTRONG. After an inspection has not permitted to hang from Armstrong's
connectors, caused by abnormal use such as been conducted by Armstrong, a written commercial suspension system.
subjecting the cables to a high number of authorization to return must be issued by
mate/unmate cycles, or incorrectly attaching Armstrong prior to any return. The canopy product must not be used to
the cables. support any other material.
I-ceilings Speaker Panels returned and found
You must notify Armstrong of any I-ceilings to be defective, in Armstrong's sole judgment, MetalWorks Vector Exterior Ceiling Panels
Antenna Panel failure covered by this warranty will either be replaced (replacement products and Suspension System Fifteen (15) Years
within 30 days of first observation of failure by may be remanufactured or reconditioned
writing to the following address: Armstrong devices) or repaired without charge. The Armstrong's MetalWorks Vector Exterior Ceiling
World Industries, Inc. Post Office Box 3001, replaced or repaired I-ceilings Speaker Panel Panels and Exterior Applications Suspension
Lancaster, Pennsylvania 17604, or call us at is warranted for the remainder of the original Systems components 7301 G90, XL7321 G90
1 877 ARMSTRONG. After an Inspection has warranty period. and BACG90, Qncluding BAC clips) are
· been conducted by Armstrong, a written warranted to be free from defects in materials
authorization to return must be issued by I-ceilings Electronic Units: Models A2001
Armstrong prior.to any return. and 02001 Processors, Model 04100 or factory workmanship and are also warranted
Amplifier, and Models TR-230 and TS-110
I-ceilings Antenna Panels returned and found TRl~PAK Units Three (3) Years against the occurrance of 50% red rust as
to be defective, in Armstrong's sole judgment, designated by ASTM B117 test procedures for
will either be replaced (replacement products Armstrong i-ceilings sound systems a period of fifteen (15) years from the date of
may be remanufactured or reconditioned electronic units - Model A2001 and 0200.1 installation (except for obvious defects in
devices) or repaired without charge. The Processors, Model 04100 Amplifier; and mate.rials or factory workmanship, of which
replaced or repaired I-ceilings Antenna Panel Models TR-230 and TS-110 TRI-PAK units Armstrong must be notified within 30 days of
is warranted for the remainder of the original the date of shipment to the customer). This
warranty period. ("electronic units" ) are warranted to be free limited warranty ls subject to further conditions
listed below.
I-ceilings Speaker Panels Three (3) Years from defects in materials or factory work-
manship so that electronic units shall All Armstrong MetalWorks Vector Exterior
Armstrong I-ceilings Speaker Panels are substantially conform to the Armstrong Ceiling Panels, Suspension members and BAC
specifications for a period of three (3) years clip materials shall be Installed in accordance
warranted to be free from defects In materials from the date of shipment to the customer with Armstrong specifications in effect at the
(except for obvlous defects in materials or time of installation.
or factory workmanship for a period of three factory workmanship, of which Armstrong must
be notified within 30 days of the date of ship- Such Installations shall not be exposed to
(3) years from the date of shipment to the .ment to the customer). This limited warranty is Abnormal Conditions, namely: chemical fumes,
subject to further conditions outlined below. vibrations, or highly acidic environments as
customer (except for obvious defects In determined by the Kesternich Test.
All electronic units shall be installed and used
materials or factory workmanship, of which in accordance with Armstrong specificati~ns in If the panels and/or suspension system are
effect at the time of installation. installed In, or subsequent to installation are
Armstrong must be notified within 30 days of exposed to, Abnormal Conditions (as referred
Armstrong will not be responsible for defects to above), then the panels and/or suspension
the date of shipment to the customer). This caused by improper or unreasonable use, system may be damaged. Such damage is
water intrusions, lightning, or malfunctions not covered by this warranty nor ls it the
limited warranty is subject to further conditions when electronic units have been modified or responsibility of Armstrong.
operated in excess of their rated capacities,
outlined below. · altered, serviced, or Installed in an other than If subject to Abnormal Conditions, the panels
workman-like manner. and/or the suspension system should be
All I-ceiling Speaker Panels shall be installed removed and replaced once the conditions of
and used in accordance with Armstrong This limited warranty is void if the label bearing
the electronic unit's date of manufacture is the installation are normal.
specifications in effect at the time of installation. removed or defaced.
This warranty ls void if Armstrong MetalWorks·
Installation of the I-ceilings Speaker Panels You must notify Armstrong of any electronic Exterior Ceiling panels and Suspension
shall be carried out where the temperature unit failure covered by this warranty within 30 Systems Oncluding BAC clips) have not been
days of first observation of failure by writing to installed together as a ·system, or if the ceiling
does not exceed 120° F (49°C). It is not the following address: Armstrong World system ls installed in a non-recommended
necessary for the area to be enclosed or for Industries, Inc. Post Office Box 3001, application.
Lancaster, Pennsylvania 17604, or call us at
HVAC systems to be functioning. Such 1 877 ARMSTRONG. After an inspection has The Ceiling Panels and Suspension System
Installations shall not be exposed to Abnormal been conducted by Armstrong, a written shall not be used to support any other material.
Conditions, namely: chemical fumes, authorization to return must be issued by
Armstrong prior to any return. Prior to installation, the panels and/or
vibrations, presence of standing water, or suspension system must be kept clean and
moisture coming into direct contact with the dry and not subject to any of the Abnormal
ceiling, such as could result from building leaks Conditions set out above.
or condensation. I-ceilings Speaker Panels
cannot be used in exterior applications.

Armstrong will not be responsible for defects
caused by improper Cir unreasonable use,
water intrusions, lightning, or malfunctions
when panels have been modified or operated
in excess of their rated capacities, altered,
serviced, or installed in an other than

workman-like manner.

@mstrong

(_,,,-+~;>

L-~~~~~~~~~~~~~~~~~~~~~---:---:---:--:---:--~-:-~~

You must notify Armstrong of any product must be placed in an environmentally stable Ceiling Suspension System Components
failure covered by this warranty within 30 days
of first observation of failure by writing to the building location for a minimum of 72 hours. Armstrong ceiling suspension system
Remove plastic wrap to allow panels to components are manufactured to meet or
following address: Armstrong World Industries, acclimatize.
Inc. Post Office Box 3001, Lancaster, Prior to installation, material must be kept exceed ASTM C 635 standards, conform to
Pennsylvania 17604, or call us at clean and dry in an environment that is ·
1 877 ARMSTRONG. Subject to confirmation between 32°F(O"C} and 86°F(30°C}, and having direct hung structural classifications of light,
relative humidity levels maintained between of intermediate, or heavy-duty, and are warranted
by Armstrong of such product failure, 25% RH and 70% RH and not subject to any to be free from red rust, bow, or camber as a
Armstrong will dellver, at Armstr?ng's . of the Abnormal Conditions set out above. direct result of defects in materials or factory
expense, F.O.B., to the place of mst~l~.t1on, workmanship for one (1} year from date of
new ceiling panels, of the same or s1m1lar You must notify Armstrong of any product installation {except for obvious defects in
type and grade, in an amount eq~al to that
which is determined to be defective. failure covered by this warranty within 30 days materials or factory workmanship, of which
of first observation of failure by writing to the Armstrong must be notified within 30 days of
following address: Armstrong World Industries, the date of installation}. This lrimtieteddbwaI rranty Is
d"ti
Inc. Post Office Box 3001, Lancaster, subject to further con 1 ens is e ow.
Armstrong WoodWorks Tegular and Pennsylvania 17604, or call us at
Vector Ceiling Panels One (1) Year 1 877 ARMSTRONG. Subject to confirmation The suspension system shall be Installed in
accordance with ASTM C636 and Armstrong
Woodworks Tegular and Vector ceiling panels by Armstrong of such product failure, specifications in effect at time of installation.
are warranted to be free from sagging and Armstrong will deliver, at Armstrong's
warping as a result of defects in materials or expense, F.O.B., to the place of installation, . If the suspension system is installed in, or
factory workmanship for one (1) year from the new ceiling panels, of the same or similar subsequent to installation is exposed to,
date of installation (except for obvious defects type and grade, in an amount equal to that Abnormal Conditions (as referred to .above},
in materials or factory workmanship, of which which is determined to be defective.
Armstrong must be notified within 30 days of then the suspension system may be damaged.
the date of Installation}. This limited warranty is Such damage is not covered by this warranty
subject to further conditions outlined below. nor is it the responsibility of Armstrong.

Armstrong WoodWorks Tegular and Vector Commercial Suspension Systems If subject to Abnormal Conditions, the
Ten (10) Years suspension system should be removed and
Ceiling Panels shall be installed In accordance replaced once the conditions of the installation
with Armstrong specifications in effect at the Armstrong Commercial Suspension Systems
time of the installation and in accordance with Oisted below} are warranted to be free from are normal.
customary Ceilings and Interior Systems defects in materials or factory workmanship
Contractors Association (CISCA) practices. and are also warranted against the occurrance Prior to installation, the suspension system
Armstrong shall not have any responsibility of 50% red rust as designated by ASTM 8117 must be kept clean and dry and not subject to
for defective processing or alteration to the test procedures for a period· of ten (1 O} years any of the Abnormal Conditions set out above.
..,.. products by others after shipment. Any from the date of installation (except for obvious
additional mounting parts such as lighting defects in materials or factory workmanship, of You must notify Armstrong of any product
or ventilation facilities, shall be suspended which Armstrong must be notified within 30
separately, or supported securely by the days of the date of shipment to the customer). failure covered by this warranty within 30 days
substructure, In accordance with Armstrong This limited warranty is subject to further
. instalfation Instructions. conditions listed. below. of first observation of failure by writing to the

following address: Armstrong World Industries,

Inc. Post Office Box 3001, Lancaster,

Pennsylvania 17604, or calfos at ... ·

1 877 ARMSTRONG. Subject to confirmation

All material shall be installed in accordance by Armstrong of such product failure, ·.

installation.of the products shall be carried with Armstrong specifications in effect at the Armstrong will deliver, at Armstrong's expense,
(-·----·· out where the temperature is between
time of Installation for PRELUDE XL, PRELUDE F.0.8., to the place of Installation, new ceiling
ML, PRELUDE XL Fire Guard, SUPRAFINE XL,
; :,. , 32°F(0°C} and 86°F(30"C}, and relative humidity SUPRAFINE ML, SUPRAFINE XL Fire Guard, panels, of the same or similar type and grade,
PRELUDE PLUS XL Fire Guard, PRELUDE XL
. '· : , l7e0v%elsRmHa. iTntta)einseedtebmeptwereaetnuroefa2n5d%hRumHiadn~d 360 Painted, SILHOUETTE XL 1/4n and in an amount equal to that which is determined
·· '.
. 1/8" reveal, AXIOM™, AXIOM-PROFILED, to be defective.
PRELUDE Concealed, CONCEALED Z-bar,
·. conditions must be met throughout the hfebme
Extruded Aluminum CLEAN ROOM,
of the warranty. It is necessary for the area to Hot-Dipped Galvanized CLEAN ROOM, Acoustical Walls One (1) Year

be enclosed and for the HVAC systems to be INTERLUDE™, SONATA™, SERPENTINA™, Armstrong acoustical walls are warranted to be
TRIMLOK~, and DRYWALL grid system free from warping and delaminatlon as a result
functioning and in continuous operation. of defects in material or factory workmanship
components that are supplied with a hot- for one (1} year from the date of instailation
Such installations shall not be exposed to dipped galvanized coating or aluminum
base material. This warranty also covers (except for obvious defects in materials or
Abnormal Conditions, namely: chemical fumes, AL PRELUDE PLUS and SS PRELUDE PLUS
suspension systems. factory workmanship, of which Armstrong must
vibrations, presence of standing water, or be notified within 30 days of the date of

moisture coming into direct contact with the instailation}. This limited warranty is subject to
further conditions outiined below.
ceiling, such as could result from building leaks

or condensation. These products cannot be

used in exterior applications.

If the product Is installed in, or subsequent to If the suspension system is installed in, or All acoustical walls shall be installed in
installation Is exposed to, Abnormal Conditions subsequent to installation is exposed to, accordance with Armstrong specifications in
(as referred to above}. then it may support the effect at the time of installation.
growth of mold. The growth of mold is not Abnormal Conditions (as referred to above},
covered by this warranty nor Is it the then the suspension system may be damaged. Installation of the products shall be carried
responsibility of Armstrong. Save in respect of AL PRELUDE PLUS, SS
PRELUDE PLUS, and PRELUDE PLUS XL Fire out where the temperature is between 32° F

If subject to Abnormal Conditions, the products Guard suspension systems, such damage is (0°C) and 86° F (30°C}. These temperature
should be removed immediately and replaced not covered by this warranty nor is it the
once the conditions of the Installation are normal. responsibility of Armstrong. conditions must be met throughout the lifetime

of the warranty. It is necessary for the area to

This warranty does not extend to variations in be enclosed and for the HVAC systems to be

color or grain, which are either due to natural If subject to Abnormal Conditions, the functioning and In continuous operation.
suspension system should be removed
variation in characteristics of the wood or immediately and replaced once the conditions Such installations shall not be exposed to
fvreonmeedrisr·~ccthaenxpgoessuIrnectoolosruonrligfahdtiongr ,parertsiaullting of the installation are normal.
exposure to a light source; any failure or defect Abnormal Conditions, namely: chemical fumes,
caused by the material becoming either overly
dry or moist, such as may result by placement vibrations; presence of standing water, or

of panels directly facing air vents or radiant moisture coming Into direct contact with the
heat source; or failure to seal full cut edges In
accordance with Armstrong's Installation Prior to installation, the suspension system ceiling, such as could result from building leaks
must be kept clean and dry and not subject to
instructions. any of the Abnormal Conditions set out above. or condensation. These products cannot be

used,in·exterior applications. ·

You must notify Armstrong of ~y product If the product is installed in, or subsequent tO

failure covered by this warranty within 30 days installation is exposed to, Abnormal Conditions
(as referred t6 above), then it may support the
of first observation of failure by writing to the growth of mold. The growth of mold is not

The ceiling panels must not be used to following address: Armstrong World Industries, covered by this warranty nor is it the
support any other material except fiberglass responsibility of Armstrong.
thermal/sound control insulation, or mineral Inc. Post Office Box 3001, Lancaster, ·

fiber panels, installed in the thickness, density, Pennsylvania 17604, or call us at ··
and manner specified by Armstrong.
1 877 ARMSTRONG. Subject to confirmation ' If subject to Abnormal Conditions, the products
should be removed immediately and replaced
by Armstrong of such product failure, once the conditions of the installation·are normal.

Armstrong will deliver, at Armstrong's

To ensure that the ceiling panels have expense, F.0.8., to the place of installation, The warranty ·does not extend to any failure or
·stabilized to the current building conditions, defect of any adhesive or other component of
new ceiling panels, of the same or similar
prior to their installation, the ceiling panels
type and grade, in an amount equal to that

which is determined to be defective.

--. . . .-~~+..---- 1--;1;,....,_..'""' 0"':l:k

J·

Warranty, l~stallation and Maintenance lnformatior-'l..

I)

any attachment system or accessory used in Concealed Tile For Glue-Up (Adhesive) Maintenance (_
the installation of the product. Installation
Armstrong Ceiling Systems require no more
The acoustical material shall not support any The temperature of the tile adhesive and the maintenance than painted DRYWALL ceilings.
other material. surface to which the ceiling tile is adhered may However, when maintenance is necessary,
cause failure. Do not install acoustical tile when certain procedures should be followed to
Prior to installation, the ceiling product must be the room temperature exceeds 100°F (38°C) or ensure continued high performance and
kept clean and dry in an environment that is when the room or adhesive temperature is attractive appearance. Dust and loose dirt
between 32° F (0°C) and 86° F (3D°C) and not below 50°F (10°C). Application to damp may easily be removed by brushing or with a
subject to any of the Abnormal Conditions set plaster, or in a damp room, may cause vacuum cleanei. Vacuum cleaner brush attach-
out above. dimensional changes In the tile and failure in ments such as those designed for cleaning
the adhesive. Tile adhered to a painted surface upholstery or walls do the best job. Be certain
You must notify Armstrong of any product will fail if the paint is loose or peeling. Do not to clean in one direction only. This will prevent
failure covered by this warranty within 30 days apply adhesive to wood or metal. Armstrong rubbing dust into the surface of the ceiling.
of first observation of failure by writing to the recommends using an acoustical ceiling After loose dust has been removed, pencil·
following address: Armstrong World Industries, adhesive and to follow the manufacturer's marks, smudges, or clinging dirt may easily
Inc. Post Office Box 3001, Lancaster, instructions. be erased with an ·ordinary art gum eraser.
Pennsylvania 17604, or call us at However, a good grade wall cleaner may be
1 877 ARMSTRONG. Subject to confirmation Thermal Insulation preferred•.Be certain to use fresh cleaner.
by Armstrong of such product failure, Most Armstrong mineral fiber ceilings may
Armstrong will deliver, at Armstrong's Mineral Ceilings be cleaned with a moist cloth or a sponge
expense, F.O.B., to the place of installation, dampened in water containing mild soap. (This
new ceiling panels, of the same or similar The use of overlaid insulation placed on, and does not apply to cloth-faced ceiling pane!s.)
type and grade, in an mnount equal to that supported by, mineral ceiling panels is not The cloth or sponge should contain as little
which is determined to be defective. recommended. The additional weight supported soapy water solution as possible. After
by the panel could result in panel sag in high washing panel face, any moisture remaining
OPTIMA Acoustical Wall Panels, Painted humidity conditions. If job requirements should be wiped off with a dry cloth. FINE
Nubby Acoustical Wall Panels are such that insulation is necessary at FISSURED Ceramaguard ceilings, VINYL-
recommended occupancy conditions, limit FACED FIBERGLASS ceilings and Mylar-faced
Installation such insulation to a maximum of .26 lb/ft' ceilings are less affected by moisture and will
(R-19 Fiberglass). Only roll insulation is withstand repeated washings with mild
Acoustical ceilings that are unsatisfactory in recommended and must be applied detergents or germicidal cleaners.
appearance are often the result of poor perpendicularly to the cross tees with the grid
application or disregard of the manufacturer's supporting the weight of the insulation. For roll Painting .Recommendation
type insulation that either has a foil or kraft Precaution
instructions. An additional source for proper paper vapor barrier on one side, always install
the vapor barrier in the down position facing Armstrong recognizes that ceilings may be
installation is the CISCA Handbook. Here are the back of the ceiling panel. If the use of batt repainted and will make recommendations for
a few recommendations to consider when the type of paint that may be used. However,
designing with and specifying an Armstrong insulation is required, limit use to 24" x 24" Armstrong cannot be responsible for the
ceiling system. finished ap·pearance.or performance for the
panels (use only nonfaced batts maximum field-paif)ted acoustical material. Armstrong
Jobslte Conditions R-19). Thermal insulation should not be cannot guarantee that the published surface
installed on the back of Fire Guard panels in burning characteristics, fire resistance ratings,
Before Armstrong ceiling materials are a fire resistive ceiling membrane unless so acoustical performance, dimensional stability
installed, the .units (ceiling panels or tile) should designated in the specific UL roof/ceiling or (sag). or light reflectance will remain the same
be permitted to r.each .room temperature and floor/ceiling design assembly assigned to the after repalnting. Repainting will render
have a stabilized moisture content. They structure; I.e., P265 or P250. infeffective any mold-Inhibiting or retarding
should not, however, be installed in spaces treatment. All warranties will be voided
where the temperature or humidity conditions Fiberglass Ceilings by field painting. When painting acoustical
vary greatly from the temperatures and materials, the painter should be very careful
conditions that will be normal in the occupied Armstrong fiberglass ceiling panels are that he/she does not close up the perforations
space (exception: ceilings with HumiGuard recommended for use when additional or fissures In the material. It is thr.ough these
Plus or HumiGuard Max performance). Some thermal insulation is required to be overlaid openings In the surface that sound waves
Armstrong ceiling materials are more abuse- on the back of the ceiling panels. Specific enter the body of the acoustical material and
resistant than others. It is not good practice to limitations apply. RANDOM FISSURED, are absorbed.
locate acoustical ceiling tile or panels on low STONEBROOKE~. and SHASTA® fiberglass
wall or ceiling surfaces where they might be ceiling panels may not be backloaded with Care should be taken that these perforations
damaged. Instead, the use of impact-resistant additive Insulation. Please contact TechLine are not clogged. Spray painting will result in
products such as Armstrong ARMATUFF" for specific fiberglass backloading a more uniform coating on embossed or
should be considered. (See Ceilings Sy$,ms recommendations. irregular surfaces. For best results, panels
should be removed from grid suspension
Selector, pages 12 & 13.) Dirty air can soil EiflY Selecting Lighting system, laid flat for painting, and allowed
ceiling, although ULTIMA™ and OPTIMA have to dry thoroughly while still flat before
When selecting any type of lighting, it is reinstallation. This method eliminates the .
superior resistance to soiling. Proper design for important to evaluate the fixtures Qighting costly operation of masking walls and covering
both supply air and return air, and maintenance system) and ceiling panels or tile as furniture. It also provides for easier cleaning
of the HVAC filters and building interior space components that work together in an and/or repalnting of the grid while the panels
are essential to minimize soiling. Before integrated system. Important considerations are being repainted. Field painting of vinyl-
starting the HVAC system, make sure supply include both initial and long-term costs, faced products is not recommended.
air is properly filtered and the building interior energy consumption and perhaps even the
is free of construction dust. lighting system's potential impact on worker ·The variations which are possible In field-
effectiveness within the space. (See High Light painted applications could affect fire
Temperatures and Humidities Reflectance Solutions on pages 22-23 for performance.
During Installation further information.) It is also always advisable
to consider the effect it will have on the Painting Method
Acoustical materials are interior finish products . appearance of an acoustical ceiling. Typically,
and are designed for installation to be carried grazing light and indirect lighting should be First remove loose dust from the material with
out in temperature conditions up to 86°F (30°C) avoided with 12" x 12" concealed grid tile a brush or vacuum cleaner attachment. Thin
in spaces where the building is enclosed and installations. Unfavorable ceiling appearance the paint only as much as necessary. If it is too
HVAC systems are functioning and will be in may be produced by light striking the ceiling thick for proper spraying, care should be taken
continuous operation. (The sole exception shall surface at small angles. This condition most that it is thinned only as recommended by the
be if the suspension system ls Armstrong frequently occurs with ceiling edge lighting paint manufacturer. When spray painting, apply
PRELUDE PLUS, in which case the temp- from fixtures, cove lighting and/or high the paint with a stream directed perpendicularly
erature and humidity conditions shall be windows. This will accentuate minor surface to the surface of the material, moving the gun
waived.) There shall be proper ventilation of variations that are beyond the control of back and forth to get a uniform coating.
the plenum in high moisture areas. All manufacturing standards for mineral fiber. Under normal conditions, one coat should
plastering, concrete, terrazzo or any other wet Further, minor differences in paint gloss often be sufficient.
work should be complete and dry. All windows are magnified by these conditions. Mitigating
and doors should be in place. The heating, the problem is best handled at the lighting
ventilating and air-conditioning systems should source with proper shading, diffusing and/or
be installed and operable, where necessary, to light redirecting devices.
maintain proper temperatures before, during
and after installation of the acoustical material.
Note: The preceding restrictions do not apply
to ceilings with HumiGuard Plus or HumiGuard
Max performance.

CEILING SYSTEMS Effective January 2007

[ Between us, ideas become reality. ]""

Woodworks® Ceiling Panels One (1) Year Limited Warranty

Please read the following terms carefully, as they are affected by the installation conditions. Armstrong does not assume nor does it authorize any person
to assume or extend on its behalf any other warranty obligation or liability. This express warranty constitutes the entire obligation of Armstrong World
Industries, Inc. and there are no other warranties expressed or implied, including any warranty of merchantability or fitness for any purpose whatsoever.

Armstrong Woodworks ceiling panels and WoodWorks custom suspension systems are warranted to be free from defects in materials or factory
workmanship for one year from the date of installation {except for obvious defects in materials or factory workmanship, of which Armstrong must be
notified within 30 days of the date of shipment to the customer). {For WoodWorks ceiling panels installed on standard suspension systems, refer to the
relevant grid warranty for Commercial Suspension Systems.)

This limited warranty is subject to further conditions listed below.

All Armstrong limited warranties are subject to use under normal conditions. Abnormal Conditions include exposure to chemical fumes, vibrations,
presence of standing water, moisture coming into direct contact with the ceiling, such as could result from building leaks or condensation, excessive
humidity, excessive dust or dirt buildup.

What will Armstrong do?

Subject to confirmation by Armstrong of such product failure, Armstrong will deliver, at Armstrong's expense, F.O.B., to the place of installation, new
product, of the same or similar type and grade, in an amount equal to that which is determined to be defective.

What does this warranty not cover?

Damage which may occur from vibrations, fire, water, chemical fumes, freezing temperature, accident or any form of abuse, or exposure to Abnormal
Conditions is not covered by this warranty. If subject to Abnormal Conditions, the product should be removed immediately and replaced once the
conditions of installation are normal. The growth of mold is not covered by this warranty nor is it the responsibility of Armstrong. All products should be
maintained to avoid excessive dirt or dust buildup or the presence of excessive moisture that would provide a medium for microbial growth.

This warranty does not extend to sagging or warping or to variations in color, texture, or grain, which are due to natural variation in the characteristics of
the wood or veneers; or changes in color or fading resulting from direct exposure to sunlight or partial exposure to a light source; any failure or defect
caused by the material becoming either overly dry or moist, such as may result by placement of panels directly facing air vents or radiant heat source,
or failure to seal full cut edges in accordance with Armstrong's installation instructions.

THIS EXPRESS WARRANTY CONSTITUTES THE ENTIRE OBLIGATION OF ARMSTRONG AND THERE ARE NO OTHER WARRANTIES EXPRESS OR
IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE WHATSOEVER. LIABILITY IS LIMITED TO THAT
SET FORTH BELOW AND ARMSTRONG SHALL IN NO EVENT BE LIABLE FOR ANY INSTALLATION OR REMOVAL COST OR FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR PERSONAL INJURY.

Warranty Conditions

Prior to installation, the panels and/or suspension system must be kept clean and dry in an environment that is continuously between the temperature
and relative humidity levels set out below and not subject to any Abnormal Conditions. To ensure that the ceiling panels have stabilized to the current
building conditions prior to their installation, the ceiling panels must be placed in an environmentally stable building location for a minimum of 72 hours.
Remove plastic wrap to allow panels to acclimatize.

Installation of the products shall be carried out where the temperature is between 50°F (10°C) and 86°F {30°C), and relative humidity levels maintained
between 25% RH and 55% RH. These temperature and humidity conditions must be met throughout the lifetime of the warranty. It is necessary for the
area to be enclosed and for the HVAC systems to be functioning and in continuous operation. All wet work (plastering, concrete, etc.) must be complete
and dry. These products cannot be used in exterior applications.

All Armstrong products shall be installed in accordance with written Armstrong WoodWorks installation instructions and/or approved shop drawings in
effect at the time of installation, as well as customary Ceilings and Interior Systems Contractors Association {CISCA) practices. Armstrong shall have no
responsibility for defective processing or alteration to the products by others after shipment. Any additional mounting parts such as lighting or
ventilation facilities shall be suspended separately pr supported securely by the substructure in accordance with Armstrong installation instructions.

How do you get service?

You must notify Armstrong of any product failure covered by this warranty within 30 days of first observation of failure by writing to the following
address: Armstrong World Industries, Inc., P.O. Box 3001, Lancaster, PA 17604, or call us at 1 877 ARMSTRONG. Reference to Armstrong in this
section shall mean, for the United States, Armstrong World Industries, Inc., P.O. Box 3001, Lancaster, PA 17604; and shall mean, for Canada:
Armstrong World Industries, Canada, Ltd., 6911 Decarie Blvd., Montreal, Quebec H3W 3E5.

How does state law apply?
This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Some jurisdictions do not allow
exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the limitation or exclusion
herein may not apply to you.

@mstrong·

Armstrong WOODWORKS Tegular and Vector Commercial Suspension Systems If subject to Abnormal Conditions, the 'i
ceiling panels shall be installed in accordance suspension system accessories should be
with Armstrong specifications in effect at the Ten (10) Years removed and replaced once the conditions of
time Of the installation and in accordance With the installation are normal. The growth of mola
customary Ceilings and Interior Systems Armstrong Commercial Suspension Systems is not covered by this warranty, nor is it the
Contractors Association (CISCA) practices. (listed below) are warranted to be free fron:i responsibility of Armstrong.
Armstrong shall not have any responsibility defects in materials or factory workmanship
for defective processing or alteration to the and are also warranted against the occurrence Prior to installation, the suspension system
products by others after shipment. Any of 50% red rust as designated by ASTM B117 accessories must be kept clean and dry and
additional mounting parts such as lighting test procedures for a period of ten (10) years not subject to any Abnormal Conditions.
or ventilation facilities, shall be suspended from the date of installation (except for obvious
separately, or supported securely by the defects in materials or factory workmanship, Acoustical Walls One (1) Year
substructure in accordance with Armstrong of which Armstrong must be notified within 30
Installation Instructions. days of the date of shipment to the customer). SOUNDSOAK, OPTIMA and
This limited warranty is subject to further PAINTED NUBBY Acoustical Wall Panels
Installation of the products shall be carried out conditions listed below.
where the temperature is between 50°F (10°C) Armstrong Acoustical Walls are warranted to
and 86°F (30°C), and relative humidity levels All material shall be installed in accordance be free from warping and delamination as a
maintained between 25% RH and 55% RH. with Armstrong specifications in effect at the result of defects in material or factory work-
These temperature and humidity conditions time of installation for PRELUDE XL, PRELUDE manship for one (1) year from the date of
must be met throughout the lifetime of the ML PRELUDE XL Fire Guard, SUPRAFINE XL, installation (except for obvious defects in
warranty. It is necessary for the area to be SUPRAFINE ML, SUPRAFINE XL Fire Guard, materials or factory workmanship, of which
enclosed and for the HVAC systems to PRELUDE PLUS XL Fire Guard, PRELUDE XL Armstrong must be notified within 30 days of
be functioning and in continuous operation. For Exterior Applications, 360° Painted, the date of installation). This limited warranty is
All wet work (plastering, concrete;etc.) must SILHOUETTE XL 1/4" and 1/8" reveal, subject to further conditions outiined below.
be complete and dry. Such installations shall AXIOM®, (all famiiies), PRELUDE Cc:ncealed,
not be. exposed to Abnormal Conditions, CONCEALED Z, Co-extruded Aluminum All SOUNDSOAK Fiberglass, OPTIMA, and
namely: chemical fumes, vibrations, presence CLEAN ROOM, INTERLUDE™, SONATA™, PAINTED NUBBY acoustical walls shall be
of standing water, or moisture coming in direct SERPENTINA™, TRIMLOK®, DRYWALL and installed in accordance with Armstrong
contact with the ceiling, such as could result SHORTSPAN™ grid system components that specifications in effect at the time of
from building leaks or condensation. are supplied with a hot-dipped galvanized installation. Installation of the products shall be
These products cannot be used in exterior coating or aluminum base material. This carried out where the temperature is between
applications. warranty also covers AL PRELUDE PLUS and 40° F (4° C) and 120° F (49° C). All wet work
SS PRELUDE PLUS suspension systems. (plastering, concrete, etc.) must be complete
If the product is installed in, or subsequent to and dry. These temperature conditions must be
installation is exposed to, Abnormal Conditions Damage which may occur from chemical met throughout the lifetime of the warranty.
(as referred to above), then it may support the fumes, freezing temperature, vibration and Such installations shall not be exposed to
growth of mold and mildew. The growth of abuse is not covered by this warranty. The Abnormal Conditions, namely: chemical fumes,
mold under these conditions is not covered by growth of mold is not covered by this warranty, vibrations, presence of standing water, or
this warranty nor is it the responsibility of nor is it the responsibility of Armstrong. moisture coming into direct contact with the
Armstrong. wall, such as could result from building leaks
Installation may be carried out in temperature or condensation. These products cannot be
If subject to Abnormal Conditions, the conditions up to i 20° F (49° C) and in spaces used in exterior applications.
products should be removed immediately and before the building is enclosed, where HVAC
replaced once the conditions of the installation systems are cycled or not operating. All SOUNDSOAK Mineral Fiber acoustical
are normal. (These systems cannot be used in exterior walls shall be installed in accordance with
applications, where standing water is present, Armstrong specifications in effect at the time
This warranty does not extend to sagging or or where moisture will come indirect contact of installation. Installation of the products shall
warping or to variations in color, texture, or with the ceiling.) be carried out where the temperature is
grain, which are either due to natural variation between 32° F (0° C) and 86° F (30° C). These
in characteristics of the wood or veneers; Performance issues which may result from the temperature conditions must be met through-
changes in color or fading, resulting from direct presence of standing water, or where moisture out the lifetime of the warranty. It is necessary
exposure to sunlight or partial exposure to a is in direct contact with the system such as for the area to be enclosed and for the HVAC
light source; any failure or defect caused by those resulting from conditions such as systems to be functioning and in continuous
the material becoming either overly dry or building leaks or condensation, are not operation. Such installations shall not be
moist, such as may result by placement of covered by this warranty nor are they the exposed to Abnormal Conditions, namely:
panels directly facing air vents or radiant heat responsibility of Armstrong, with the exception chemical fumes, vibrations, presence of
source; or failure to seal full cut edges in of AL PRELUDE PLUS, SS PRELUDE PLUS standing water; or moisture coming into direct
accordance with Armstrong's installation and PRELUDE XL for Exterior Applications and contact with the wall, such as could result from
instructions. DRYWALL Grid Systems with G90 coating. building leaks or condensation. These products
cannot be used in exterior applications.
The ceiling panels must not be used to support Prior to installation the suspension system
any other material except fiberglass thermal/ must be kept clean and dry and between If the product is installed in, or subsequen~ .to
sound control insulation, installed in the 32°F (0°C) and 120°F (49°C) and not subject to installation is exposed to, Abnormal Cond1t1ons
thickness, density, and manner specified any of the Abnormal Conditions set out above. (as referred to above), then it may support the
by Armstrong. growth of mold. The growth of mold is not
Ceiling Suspension System Accessories covered by this warranty nor is it the
Prior to installation, materials must be responsibility of Armstrong. If subject to
kept clean and dry in an environment that Armstrong ceiling suspension system . Abnormal Conditions, the products should be
is continuously between the temperature and accessories are manufactured to the highest removed immediately and replaced once the
relative humidity levels set out above and not quality standards, and are warranted to be free conditions of the installation are normal.
subject to any of the Abnormal Conditions from red rust as a direct result of defects in
set out above. materials or factory workmanship for one (i) Prior to installation, the wall product must be
year from date of installation (exqept for kept clean and dry in an environment that ls
To ensure that the ceiling panels have stabilized obvious defects in materials or factory temperature controlled between the upper and
to the current building conditions, prior to their workmanship, of which Armstrong must be lower limits cited above for fiberglass and
installation, the ceiling panels must be placed notified within 30 days of the date of mineral fiber products and not subject to any
in an environmentally stable bullding location installation). This limited warranty is subject of the Abnormal Conditions set out above.
for a minimum of 72 hours. Remove plastic to further conditions listed below.
wrap to allow panels to acclimatize.
If the suspension system accessories are
installed in, or subsequent to installation is
exposed to, Abnormal Conditions, then the
suspension system accessories may be
damaged. Such damage is not covered by
this warranty nor is it the responsibility of
Armstrong.

rArmc:trnnn• 0AO

About Armstrong Contact Us

>Corporate Fact Sheet Armstrong World Industries Commercial
>Corporate Governance 2500 Columbia Ave. (17603)
>History P.O. Box 3001 An:nstr.ong Flo
>Management Team Lancaster, PA 17604
>Media Contacts (717)397-0611 f?rncS?_ H.cirow.o·
> Press Releases
>Chapter 11 Information D Hi'lrt<:o H9r<;fwJ
>Awards & Recognition
Employment Office
Diversity
>Commitment ~
>Councils
>Recruiting Investor Relations
>Suppliers
~
Corporate Giving
>Armstrong Foundation Floors
>Community Involvment
Ceilings
Press Room
>Corporate ~
>Commercial Ceilings
>Commercial Flooring Ceramic

~

Cabinets

Armstrong Home I For the Home I Para el Hagar I Commercial Floors I Commercial Ceilings I Careers I Site
About Armstrong I International Sites I Contact Armstrong I Terms & Conditions I Privacy Policy

Your Ideas Become Reality® with Armstrong.com®

© 2000-2006 AWI Licensing Company. All rights reserved.

li1J Chicago Metallic"
~airanIB ~=::t~==tially
to Purchaser conform ill quantify and I

quality to Purchaser's order, as accepted by Seller, provided, however, that (1) Products

are inspected by Purchaser upon arrival at place of destination and any and all

nonconformities are noted on the bill of lading and all other delivery documents and

are attested to in writing by carrier's representative (2) Purchaser furnishes Seller with

written notice of such nonconformities within fifteen (15) days following arrival of

nonconfonning Products at the place ofdestination, (3) Purchaserholds nonconforming

Products for Seller's inspection (4) nonconformities occurred prior to delivery by

Seller of Products F.O.B. place of shipment, and (5) Purchaser does not alter, repair,

use or attempt to alter or repair any nonconfonning Products. This limited wananty

is Seller's only and exclusive express warranty to Purchaser. Seller disclaims any and

all implied warranties including without limitation any implied warranty of merchant-

ability or fitness for a particular purpose.

Purchaser's sole and exclusive remedy against Seller shall be the replacement F.O.B.
its plant or site, at Seller's option, of any Products which do not conform to Seller's
limited warranty hereunder. No other remedy (including, without limitation, inciden-
tal or consequential damages for lost profits, lost sales, injury to persons or property
or any other incidental or consequential loss) shall be available to Purchaser.

Purchaser agrees to include in all contracts between Purchaser and subsequent owners
or users of Products, and to bring to the attention of all Purchaser's customers of
Products, the following warranty disclaimer: Chicago Metallic Corporation disclaims
any and all warranties expressed or implied, including, without limitation, any implied
·warranty of·merchantability or iitness-fora·particular ·purpose·:-·Purchaser shall-be
excluded on behalf of Seller all remedies for damage or injury to Products persons or
property. In the event that Purchaser fails to comply with the foregoing obligations,
Purchaser shall indemnify Seller for any liability resulting from such non-compliance
and shall otherwise hold Seller harmless.

© 2002 Chicago Melallic Corporation Chicago Melallic and its logo are Registered Trademarks of Chicago Metallic Corporation. C·LIABILITY-902
All Rights Reserved Prtnled in USA

. ..

CORPtlRATE . ..
.
iHIE~DQ :UARTEiRS
-~

CHICAGO METALUC CORPORATION
4849 South Austin Avenue
Chicago, Illinois 60638
Manufacturing Location
and Sales Office
T 800.323.7164 / F 800.222.3744

[email protected]

For Website Concerns:
[email protected].

1341 cobblestone wav • P.O. Box 700 •Woodstock, IL 60098 • Phone: <815> 338-6566 • Fax: <815> 338-6679

WARRANTY

The undersigned contractor hereby warrants the installation of the wood
flooring installed at the Francis Parker School, Chicago, Illinois for a period
of three years beginning on date of substantial completion (February 24,
2009).

This warranty does not cover damage caused in whole or in part by casualty,
ordinary wear and tear, abuse, use for which the material is not designed, faulty
construction of the building, settlement of the building walls, failure of the
substrate, whether concrete, asphalt, or other material for whatever reason,
including but not limited to failure of others to adhere to specifications,
separation, migration, or water vapor transmission out of or through the slab, and
failure of the coatings because of neglect or failure to follow recommended
maintenance procedures. This warranty specifically excludes damage caused
by exposure to moisture or water from any source.

This warranty is in lieu of all other warranties, express or implied,
including, but not limited to any warranty ofmerchantability or fitness for a
particular purpose and of any other obligation on the part of the
undersigned.

This warranty constitutes the only warranty made by the undersigned and is a
complete and exclusive statement of the obligations of the undersigned. The
undersigned makes no representations, express or impiied, not specified herein.
Any and all representations, promises, warranties or statements by the
undersigned that differ in any manner from the terms of the written warranty shall
be of no force or effect.

In the event of breach of warranty, the liability of the undersigned shall be limited
to repairing or replacing the material and system components proven to be
improperly installed and shall not include any other damages, either direct or
consequential.

FLOORS, INCORPORATED

@ Printed on Recycled Paper

GUA

Floor Systems, "

Action Floor S~stems, LLC warrants that the material it shipped to
J.i'ra.nc:i.s Parker School

will be free from defects in materials and workmanship for a period of

three v e. a rs beginning 2I 24. / 0 9 . The flooring installer warrants

that the installation of the flooring will be free from defects in materials and
workmanship for a period of three vears from beginning 2/24/09
The exclusive remedy under this warranty shall be replacement of defective material
by Action Floor Systems, LLC., or correction of defective installation by the flooring
installer. All implied warranties of merchantability or fitness for intended use are
limited to the period of this warranty. This warranty excludes consequential damages.

This warranty does not cover damage caused by fire, winds, floods,
chemicals, or other abuse, or by failure of other contractors to adhere to
specifications, or neglect of reasonable precautions to provide adequate ventilation
during hot or humid weather. This warranty also excludes damage due to excessive
dryness or excessive moisture from humidity, spillage, migration through the slab
or wall, or from any other source. This warranty also excludes damage to floors
due to ordinary wear and tear, faulty construction of the building (other than the
flooring installation), separation of concrete slab underlying the floor, settlement
of walls, or use of water on the floors. During the warranty period, the floor cannot
be coated without the approval of the flooring contractor.

Floors, Ircorporated

Licensed Contractor

PO l1ox 700

Wh-itP - rw::tnTYIPr rnnv • YPllnVJ- rnntr;qrtnr lnnv 0 Pink - M;i:n11farh1rPr C'nnv

1341 Cobblestone wav • P.O. Box 700 •Woodstock, IL 60098 •Phone: (815> 338-6566 • Fax: (815> 338-6679

TRANSMITTAL

\'Y\ure_ \l Jone,s 0 - L'B-ot:J
TO: ~ luAV\ (,o".>+tvolwvi DATE:
ffcvx Is R:l ;kif S~l
\ l \ f. I w~0Lt£.r ~r, S·-1-e I d-LlSU RE: \/\Joo J fcoo r~

UAlltt')o \l- G2o(po I

±PLEASE FIND ENCLOSED:
gg~:~~ g~ ~~i~r~G~:;e0z
COPIES OF
COPIES OF
COPIES OF

SUBMITTED FOR:

I

INFORMATION

APPROVAL---~--

FILES

PAYMENT---~--

OTHER- - - - - -

PLEASE NOTE:

VERY TRULY YOURS,

FLOORS, INCORPORATED

BY: 5-kkLfiV\,-hJ~Jrt,

RTE

COMMERCIAL FLOORING

Date: February 24, 2009

Contractor: Berglund Companies
Project: 111 E Wacker Dr. Ste. 2450
Chicago, IL 60601

Francis W. Parker - North Wing
330 W. Webster - Floors 1-4
Chicago, IL 60614

CERTIFICATE OF WARRANlY - CARPET

"We the undersigned, herewith guarantee the work associated with the Contract Documents against
defects in materials or workmanship or any nonconformity with the requirements of the Contract
Documents for a period of (1) one year from the effective date of February 24, 2009 for this guarantee.
Vortex Enterprises, Inc. agrees to promptly correct any such defects or nonconformity occurring within such
period at no cost or expense to the owner."

If carpet is to be replaced... All areas in which carpet is to be replaced under the terms of this warranty
must be cleaned at the customer's expense of all equipment, furnishings, partitions, and similar materials
that may have been installed or placed over the carpet subsequent to completion the original installation.
In the event replacement is to be made for carpet, which is no longer a current product manufactured by
the manufacturer, replacement will be made with a comparable style from the manufacturer's current line.

Limitations... Vortex shall not be responsible for moving expenses, lost profits or any other loss or expense
of any kind whether arising from delay, breach of warranty or any other cause. Our warranty is assigned to
the original end user for carpet installed in its original location, and it is not transferable.

Exclusions... This warranty does not cover any disfigurement or damage caused by the following factors or
equipment:
1. Dragging furniture or equipment across seams.
2. Abnormal or improper use or use otl1er than a floor covering.
3. Failure to maintain adequate ambient temperatures and ventilation during extreme changes in

outside weather (i.e. use of air conditioning during summer or heating during winter.)
4. Placing excessively heavy equipment on carpet.
5. A tear, burns, pulls, and cuts.
6. Failure to use chair pads under desks or chairs with rolling casters over seams.
7. Failure to use manufacturers recommended cleaning methods, frequency, and trained personnel

to maintain carpet. (DuPont Fiber requires DuPont Cleaning Methods.)
8. Athletic equipment such as roller blades, ski boots, and spike athletic shoes.
9. Accidental flooding and acts of God.

~~:;;,:~': ~ (l~h__ Date:_ _ _~Fe=b~r=ua=ry.;_=2~4~.2=0~0~9~--

Title: Senior Pa1tner

QJ i 0 0 "'I !4 2s West Official Road Addison, Illinois 60i 01
""'i s3o.4sa.asoo s3o.45a.aso1 @ -c w1·1w.vortexchicago.corn

Date: February 24, 2009

Contractor: Berglund Companies
Project: 111 E Wacker Dr. Ste. 2450
Chicago, IL 60601

Francis W. Parker - North Wing
330 W. Webster - Floors 1-4
Chicago, IL 60614

CERTIFICATE OF WARRANTY - RESILIENT FLOORING

"We the undersigned, herewitl1 guarantee the work associated with the Contract Documents against
defects in materials or workmanship or any nonconformity with the requirements of the Contract
Documents for a period of (1) one year from the effective date of February 24, 2009 for this guarantee.
Vortex Enterprises, Inc. agrees to promptly correct any such defects or nonconformity occurring within such
period at no cost or expense to the owner."

If Resilient Flooring is to be replaced... All areas in which resilient flooring is to be replaced under the
terms of this warranty must be cleaned at the customer's expense of all equipment, furnishings, partitions,
and similar materials that may have been installed or placed over the resilient flooring subsequent to
completion the original installation. In the event replacement is to be made for resilient flooring, which is
no longer a current product manufactured by the manufacturer, replacement will be made with a
comparable style from the manufacturer's current line.

Limitations... Vortex shall not be responsible for moving expenses, lost profits or any other loss or expense
of any kind whether arising from delay, breach of warranty, or any other cause. Our warranty is assigned to
the original end user for resilient flooring installed in its original location, and it is not transferable.

Exclusions... This warranty does not cover any disfigurement or damage caused by the following factors or
equipment:
1. Abnormal or improper use or use other than a floor covering.
2. Failure to maintain adequate ambient temperatures and ventilation during extreme changes in

outside weather (i.e. use of air conditioning during summer or heating during winter.)
3. Failure to use manufacturers recommended cleaning methods, frequency, and trained personnel to

maintain resilient flooring.
4. Athletic equipment such as roller blades, ski boots, and spike athletic shoes.

5. Accidental flooding and acts of God.

signed:--!~~CO._,_,A~d~L=i'--',x_··-t-~~,J,__--··_L_ _ Date:_ _ _~Fe~b~r=ua=ry.J-=2~4~.2=0~0~9~--

Printed:_ _ __,R~a~n=d,_,_y_,_Rfi"'"'1c""~"----"-------

Title:____-'S=e~n=io=r~P__,,?',_,_Ft~n=e~r_ _ _ _ _ __

62) 0 0 © -<I-ct 125 West Official Road Addison, Illinois 60101
-< / 630.458.8600 <41630.458.8601 www.vortexchicago.com

Date: February 24, 2009

Contractor: Berglund Companies
Project: 111 E Wacker Dr. Ste. 2450
Chicago, IL 60601

Francis W. Parker - North Wing
330 W. Webster - Floors 1-4
Chicago, IL 60614

CERTIFICATE OF WARRANTY - VINYL COMPOSITION TILE (VCT)

"We the undersigned, herewith guarantee the work associated with the Contract Documents against
defects in materials or workmanship or any nonconformity with the requirements of the Contract
Documents for a period of (1) one year from the effective date of February 24, 2009 for this guarantee.
Vortex Enterprises, Inc. agrees to promptly correct any such defects or nonconformity occurring within such
period at no cost or expense to the owner."

If Vinyl Composition Tile (VCT) is to be replaced... All areas in which Vinyl Composition Tile (VCT) is to be
replaced under the terms of this warranty must be cleaned at the customer's expense of all equipment,
furnishings, partitions, and similar materials that may have been installed or placed over the Vinyl
Composition Tile (VCT) subsequent to completion the original installation. In the event replacement is to
be made for Vinyl Composition Tile (VCT), which is no longer a current product manufactured by the
manufacturer, replacement will be made with a comparable style from the manufacturer's current line.

Limitations.•. Vortex shall not be responsible for moving expenses, lost profits or any other loss or expense
of any kind whether arising from delay, breach of warranty, or any other cause. Our warranty is assigned to
tl1e original end user for Vinyl Composition Tile (VCT) installed in its original location, and it is not
transferable.

Exclusions... This warranty does not cover any disfigurement or damage caused by the following factors or
equipment:
1. Abnormal or improper use or use other than a floor covering.
2. Failure to maintain adequate ambient temperatures and ventilation during extreme changes in

outside weather (i.e. use of air conditioning during summer or heating during winter.)
3. Failure to use manufacturers recommended cleaning methods, frequency, and trained personnel to

maintain Vinyl Composition Tile (VCT).
4. Athletic equipment such as roller blades, ski boots, and spike athletic shoes.
5. Accidental flooding and acts of God.

\

~ f~t:~: = ~ :~= R:a'" "'n~d:{=~ :~:i'°"-c=':, ,- = ~/k='~C_:J_t_-,_~_--:==== Date:______,_F=e=br~u=a"-rv~2=4~·~2=0~0=9~--

Title:_ _ _ _~S~e~n~io~r~P~a~rt=n=e~r_ _ _ _ _ __

62J i 0 "' 0 0 I~ 2s West Official Road Addison, Illinois 60101
1630.458.BSOO ~ J 630.458.8601 ~ www.vortexchicago.com

Date: February 24, 2009

Contractor: Berglund Companies
Project: 111 E Wacker Dr. Ste. 2450
Chicago, IL 60601

Francis W. Parker - North Wing
330 W. Webster - Floors 1-4
Chicago, IL 60614

CERTIFICATE OF WARRANTY - RESILIENT WALL BASE

"We the undersigned, herewitl1 guarantee the work associated with the Contract Documents against
defects in materials or workmanship or any nonconformity with the requirements of the Contract
Documents for a period of (1) one year from the effective date of February 24, 2009 for this guarantee.
Vortex Enterprises, Inc. agrees to promptly correct any such defects or nonconformity occurring within such
period at no cost or expense to the owner."

If Resilient Wall Base is to be replaced... All areas in which Resilient Wall Base is to be replaced under the
terms of this warranty must be cleaned at the customer's expense of all equipment, furnishings, partitions,
and similar materials that may have been installed or placed over the Resilient Wall Base subsequent to
completion the original installation. In the event replacement is to be made for Resilient Wall Base which
is no longer a current product manufactured by the manufacturer, replacement will be made with a
comparable style from the manufacturer's current line.

Limitations... Vortex shall not be responsible for moving expenses, lost profits or any other loss or expense
of any kind wl1ether arising from delay, breach of warranty or any other cause. Our warranty is assigned to
the original end user for Resilient Wall Base installed in its original location, and it is not transferable.

Exclusions... This warranty does not cover any disfigurement or damage caused by the following factors or
equipment:
1. Abnormal or improper use or use other than a floor covering.
2. Failure to maintain adequate ambient temperatures and ventilation during extreme changes in

outside weather (i.e. use of air conditioning during summer or heating during winter.)
3. Failure to use manufacturers recommended cleaning methods, frequency, and trained personnel to

maintain Resilient Wall Base.
4. · Athletic equipment such as roller blades, ski boots, and spike athletic shoes.

5. Accidental flooding and acts of God.

SPirginnteedd::.__-'_--=_~'~-R"=-a'~~n"=-d"_-,M_f,l_~V_i,Rt,AJ'/~R_=i,',C_~hU?Zrth~~(v~--~--=----- Date:_ _ ___,_F=e=br~u=a"-'iy'--'2=-4.,.,._,,2=0,..,0=9'----

Title:_ _ _ _~S=e~n=io=r~P~a~rt~n=e~r_ _ _ _ _ __

Gj 0) 0 @ -<I<4125 West Official Road Addison, Illinois 60101 www.vortexchicago.com
"'1630.458.8600 -41630.458.8601

squared®

11 ITEGR?.TED CUSHIOii

THERMOBOND

Backing Systems Lifetime Warranty

Lees Squared offers a lifetime warranty on all INTEGRATED CUSHION THERMOBOND"" (ICT) and AirTrek carpet modules
covering face yarn, wear, backing material and performance. This lifetime warranty covers modular carpet made by Lees.
This product is warranted against wear, failure of static protection, delamination of secondary backing, edge ravel, and tuft
bind loss. This product is warranted not to cup, dome or dish. It is warranted to be dimensionally stable and to remain so
through the lifetime of the carpet.

Features Warranted:

Edge Ravel/Tuft Bind
Lees warrants that under normal use ICT and AirTrek carpet modules will not edge ravel along seams or lose tuft bind
integrity for the lifetime of the carpet.

Dimensionally Stable
Lees warrants that its ICT and AirTrek modules are dimensionally stable and will not shrink or grow under
normal use conditions.

Cup, Dome, Dish
Lees warrants that its ICT and AirTrek modules will not cup, dome or dish.

Backing Lamination
Lees warrants that the secondary backing of ICT and AirTrek carpet modules will not delaminate during the
lifetime of the carpet. Chair pads are not required.

Wear
Lees warrants that ICT and AirTrek carpet modules will lose no more than 10% by weight of pile face fiber
during the lifetime of the carpet from time of purchase, when installed and maintained in accordance with Lees'
published procedures, a copy of which will be made available to the prospective purchaser at the point of sale.

Static Protection
Lees warrants that ICT and AirTrek carpet modules will give protection from static discharges in excess of
3.0 KV when tested under the Standard Shuffle Test method at 70°F and 20% R.H.

Adhesives
Lees warrants that Lees Squared Pressure Sensitive adhesives will bond carpet to and release carpet from the properly
prepared substrate for the life of the carpet. Substrate must meet Lees recommended floor preparation procedures and glued
floor must remain free of dust, debris or other contaminates. Should Lees' adhesive not be used, Lifetime Adhesive Warranty
becomes null and void.

Smoke Density
Lees warrants that every shipment of ICT and AirTrek carpet modules will generate less than the generally
accepted requirement of 450 Corrected Maximum Specific Optical Density (flaming mode) for smoke developed
when tested in accordance with ASTM Test Procedure E662 (NFPA 258).

Limited Warranty

This carpet is warranted to be merchantable and fit for ordinary purposes for which carpet is used. Any portion not
performing as stated wil l be repaired to conform to this warranty. Ho wever, if repair is not commercially practical, Lee s may
elect to replace the carpet or to refund the purchase price. Lees wil l pay the costs of the carpet, freight an d labor.
Replacement will be made with a product from the then current Lees running line comparable to the carpet warranted.

No charge will be made forthe actual installation of the replacement carpet. However, all areas in which carpet is to be replaced
under the terms of this warranty must be cleared at the consumer's expense of all equipment, furnishings, partitions and the
li ke, that may have been installed over or placed on the carpet subsequent to the original installation. This warranty is made
to the original purchaser for carpet installed in its original location; it is not transferable.

Notification of Warranty Claims

All claims asserted under this warranty should be submitted to the warrantor, in writing, as follows:
Lees Carpets• 706 Green Valley Rd, Suite 300 •Greensboro, NC 27408 •Attn: Customer Service• Telephone: 800 523-5647

Obligations of Warrantor

Lees will, within ten (10) business days of receipt of such written notice, designate a representative to promptly inspect the
carpet and evaluate the warranty claim.

Exclusions and Limitations on Warranty

This warranty does not cover disfigurement or damage caused by abnormal use or by use of chlorinated or any other solvent-based
cleaning agents; or use of any adhesive or cleaning chemicals other than Lees' adhesive or Lees' DURASAFE®cleaning products or
products approved, in writing, by LeesTechnica l Service; damage that does not arise out of a manufacturing defect; damage caused
by stains, sharp objects and the like; damage caused by the installer or the workmanship of the insta ller (if not installed by Lees);
or the condition of the sub-floor (e.g. undue moisture). Shading, pile crush, dyelot differences or soiling are not manufacturing
defects, and are not covered by the warranty. Incidental or consequential damages are excluded.

Lees shall have no liability or responsibility with respect to any pre-existing hazardous materials on premises where carpet is
installed; or use of adhesive not recommended by Lees. Lees is not responsible for any change or modification to the carpet which
might occur after it leaves Lees' premises, including, but not limited to the presence of chemicals or materials which we re not
specified as components of the carpet.

Project Name :

I/I '-

Yardage: f{PP'i 3)000 $;{.

Purchaser: fMNt/ <;. rv'.---\PA1ZJt_RL
!,. //
Lees Representat.1ve s·1gnature: ( ; 1. /' --. -f-,-/-~f/1J-J;I'f ./',&/:=; /-c_~./.c;:, :._ _ _ _ _
/
/'', ·l..' ,_,.,. ~ ~

. /' 1/ ' /

Customer Signature:

LIMITED WEAR WARRANTY

~~freudenberg Building Systems, Inc. ("FBS"), warrants its nora®, norament®, and noraplan® Rubber Flooring, norament®
\ };bber Stairtreads, (except for the safety grit strip), accessories and adhesives, ("Products") to be free of defects in material or

..jworkmanship, for one year from the date of purchase from FBS. In addition, FBS warrants against excessive wear of the listed
Products as set forth below, and FBS warrants the conductivity of its Electro Static Disspative, ("ESD") Flooring System (flooring and
adhesive) as set forth below.

EXCEPT FOR THE LIMITED WARRANTIES SET FORTH HEREIN, FBS EXTENDS NO OTHER WARRANTIES OR
GUARANTEES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, OR EXACT MATCHING OF SHADE, COLOR OR MOTTLING. FBS HEREBY
DISCLAIMS ANY OTHER WARRANTY OR GUARANTEE UNLESS EXPRESSLY AUTHORIZED AND ENDORSED IN
WRITING AS SET FORTH BELOW.

No agent, employee or representative of FBS is authorized to make any warranty or guarantee concerning the Products. Any
alteration, amendment or waiver of this Limited Warranty must be in writing and signed by an officer of FBS.

NOTICE OF CLAIMS: To make a claim under any warranty the buyer or end user must provide written notice to FBS at 94 Glenn
Street, Lawrence, MA, 01843, within thirty (30) days of discovery of any alleged defect of the Product. FBS must be given the
opportunity to inspect and examine the Product.

LIMITATION OF LIABILITY: FBS shall not be directly or indirectly liable for any losses, claims or damages regarding any
Products that have not been installed and maintained according to FBS's installation and maintenance instructions, that was
damaged by a third party, that was installed over an improper subsurface or improperly prepared subfloor, that was improperly
repaired, or that was affected by any other mechanical influences. Office chairs/furniture wheels shall be type W according to EN
12529. FBS shall not be liable for any losses, claims, or damages in excess of the cost of the Products invoiced by FBS. FBS shall
not be liable for any incidental, consequential, enhanced or punitive damages. FBS reserves the right to replace at no cost that
portion of the Products that are alleged to be defective but excluding all costs of transportation and installation. FBS's maximum
liability whether in tort, contract, or otherwise shall be the cost of the Products invoiced by FBS.

This Limited Warranty, installation instructions and maintenance instructions are subject to change. Please contact FBS for latest
versions. For additional information regarding usage in recommended applications, please refer to our current Product Catalog or
call 1-800-332-NORA. Warranty periods commence on the date of purchase of the Product by the buyer or end user
whichever is first.

/"'~s.,~XCESSIVE WEAR WARRANTY: FBS warrants the following Products will not wear in excess of the following measurements

\. )hich shall be prorated from the date of purchase:

J2 1 i o r a m e n t ® 925, 986, 920, 926 xi, 928, 992 <.0025" wear per year.

"'"

norament® 825 <.0030" wear per year.

noraplan® products <.0035" wear per year.

norament® stairtreads <.0025" wear per year.

CONDUCTIVITY WARRANTY: FBS warrants the following ESD Flooring System Products, installed with FBS's conductive

adhesive (acrylic or PU), when tested according to the test procedures of ESD S7. l -94 and ASTM-F-150 under >30%

relative humidity at room temperature will measure between:

noraplan® duo el, duo el plus <1 x 106 OHMS
norament® 928 al grano, 928 al Iago <109 0HMS
noraplan® stone al, mega al, plus al 106 <109 0HMS
106

Warranty for other conditions on request

Excessive Weer Condudivify
Worronlv Worronlv
10 years
5 years 10 years
x
norament® 825/1902/191 O Commercial Traffic x x
norament® 925/354/1880/1912/1870 Extra Heavy Traffic
norament® 986/256/3003/3008 Extra Heavy Traffic x
norament® 920/354 Special Application
norament® 926 xi/354/379 Special Application x
norament® 992/1955/1956 Special Application
norament® 928 al/1912/1880 Special Application x
noraplan® uni/stone/classic/mega/environcare/
eco/logic/stone acoustic/mega acoustic/environcare Commercial Traffic x
acoustic x
noraplan® duo el/duo el plus/stone al/mega al/ Commercial Traffic
environcare al x
nora® sportsfloor 1333/1334 Special Application
.•norament® 920/926 xi stairtread Special Application x nora0 Rubber Flooring
l t:>rament® stairtread Heavy Traffic
\ x Freudenberg
Building Systems, Inc.
.._,,~"''"' x
x 94 Glenn Street
Revised 06/07 x Lawrence, f.M 01843
Toil-free: 800-332-NORA

Phone: (978) 689-0530
Fax: (978) 975-01l0

E-mail: [email protected]

www.norarubber.com

Limited 5-Year Commercial Warranty If the floor should wear through and it is damage caused by other abuse or IMPORTANT NOTICE: All warranties
for Manufacturing Defects and Wear reported in the second year from the accident. apply to the original user and are not
The following warranty applies to all first original purchase date, Mannington will transferable under any conditions. If a
quality Mannington Commercial Vinyl authorize repair or replacement and will • Problems caused by uses contrary Mannington Commercial VCT floor is
Composition Tile (VCT) products when pay 50% of reasonable labor costs. to Mannington recommendations. replaced under warranty the
installed in accordance with Mannington replacement floor will be an equivalent
Professional Installation Guide. If the floor should wear through and it is • Variations in color, shade or Mannington Commercial VCT product
reported in the third, fourth or fifth year decoration from printed illustrations and will be warranted under the terms of
The Mannington Commercial Vinyl from the original purchase date, or samples. this warranty for the balance of the five-
Composition Tile floor you purchase is Mannington will authorize repair or year life of the original warranty.
guaranteed free from defects resulting replacement of the defective material • Labor on material installed with
from the manufacturing process for a but will not cover labor costs. obvious defects. This warranty is in lieu of all other
period of five years from the original express warranties. This warranty gives
purchase date. Mannington's obligations under this • Mannington warranties do not cover you specific legal rights and you may
warranty are subject to the exclusions labor costs on repair or also have other rights which vary from
If there is a manufacturing defect in the stated below. replacement of material which was state to state. Mannington will not be
floor and it is reported within the first not originally professionally liable for indirect, special, incidental,
year from original purchase date, There are no implied warranties, installed. consequential, or other damages of any
Mannington will authorize repair or including merchantability and fitness for kind, no matter what the cause. Some
replacement at no charge and will pay a particular purpose and fitness for a • Loss of gloss, or film build-up due states do not allow the exclusion of
for reasonable labor costs. particular purpose, extending beyond to improper maintenance. incidental or consequential damages, so
the term of this written warranty. Some the exclusion in the preceding sentence
If there is a manufacturing defect in the states do not allow limitations on how • Any bond failure of Mannington may not apply to you.
floor and it is reported in the third, fourth long an implied warranty lasts, so the Commercial VCT resulting from
or fifth year from the original date, preceding sentence may not apply to improper adhesive selection or For more information please call
Mannington will authorize repair or you. application. 1-800-241-2262, or Mannington
replacement of the defective material, Commercial Facts On Demand at 1-
but will not cover labor costs. Excluded from Limited 5-Year • Damage from narrow tipped heels. 800-FLOOR-85, or write to Mannington
Commercial Warranty • Problems due to moisture, mildew, Resilient Floors, P.O. Box 30, Salem,
The Mannington Commercial Vinyl • Dissatisfaction due to non- NJ 08079
Composition Tile floor you purchase is alkaline substances, or hydrostatic
guaranteed not to wear through within recommended installation pressure in the underfloor. In Canada, write to P.O. Box 67021,
five years of the original purchase date. practices. Mannington installation 3200 Erin Mills Pkwy., Mississauga,
instructions are available from your Warranty Claims Ontario L5L 5W9 Canada
Because Essentials and Inspirations are dealer or from Mannington. If there is a claim under this warranty,
through-pattern tile, wear is defined as • Any damage such as burns, stains you must immediately provide written S- J! Ml.M\NINGTON
wear through the complete product (including those caused by rubber notice, together with proof of purchase,
down to the underlayment or underfloor. backed mats), cuts scratches, COMMERCIAL
scuffs, gouges, indentations, to the flooring contractor from whom the
If the floor should wear through and it is including lack of or improper floor
reported within the first year of the protection or furniture rests, floor was purchased. This notice must
original purchase date, Mannington will staining caused by tracked-in dyes be received by the flooring contractor
authorize repair or replacement at no from carpet, fertilizers, tar or within five years from the date of
charge and will pay for reasonable labor asphalt driveway sealers or oil purchase.
costs. drippings, fading and discoloration
frorn prolonged, excessive The flooring contractor will notify
exposure to sunlight or heat, and Mannington's distributor who will
arrange inspection of the floor or to
review the complaint with the flooring
contractor. Should this inspection or
review indicate an obligation the part of
Mannington, such obligation will be
satisfied through your flooring
contractor.

Limited Five-Year Commercial Warranty