LED Strips 2020 | Finlight Group Oy

24V 60LED 100 8
16.7 8.33
8
DC24V

24V 120LED
50

24V

Connection diagram:

Power supply + red 12V

- black 1. Connect red wire of LED strip to positive polarity,and connect
black wire to negative polarity;

cutting line

12V

2.The LED strip can be cut according to sissors
mark because of different requirements;

Power supply 12V

3.The cut LED strip can be connected to power supply via
accessories.

Packing instruction:

Packing box Anti-static bag LED strip+accessories

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P3

Installation requirement:

1. The LED strip and accessories can't be squeezed or folded;
2. PCB conductive parts can't be damaged when installation;
3. Installation must conform to electrical safety standard. The LED strip can only be installed by professionals;
4. Ensure power supply transform operating load with transformer;
5. When install on metal or conductor surface, insulation protection need to be provided to the contact area;
6. Observe positive and negative polarity, ensure correct connection to avoid damaging LED strip;
7. When installation, please prevent static electricity;
8. The product need anti-corrosion environment, such as, avoiding damp, water drop or other adverse

elements.

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P4

FL-2216TM-XXD-XX-12&24V

Available colors

5

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 02
[email protected]

Features

2216 Full Spectrum LEDs
CRI95
CE, ROHS, 5 years warranty
The LED strip can be cut to meet requirements of different length.
By complementing the missing parts of spectrum, the high-CRI full spectrum LED light source the product used,
which is eco-friendly, improves spectrum continuity and saturation of color gamut of the light source. Therefore,
color value of the RI~R15 standard sample is greatly improved and blue light hazard and rich bluing of traditional
LED light source is effectively reduced, making the product more applicable to lighting front.
Customized packaging.

Application

Stage lighting
Festival, activities, exhibition lighting, etc
Backlight of signage
Contour lighting
Landscape decoration lighting
Indoor beautification

Technical parameters

Model Color Lumen LED Qty. Rated Wa LED Type Beam angle DC Voltage IP CRI
FL-2216TM-12D-XX (leds/m) (w/m) 20 95
FL-2216TM-24D-XX W 700 9.6 (degree) (V)
FL-2216TM-28D-XX NW 650 120
FL-2216TM-30D-XX WW 580 19.2 2216 120 12/24
240
W 1380 24
NW 1250 280
WW 1120
300
W 1650
NW 1560
WW 1380

W 1750
NW 1660
WW 1450

Dimensions (unit: mm/inch)

FL-2216TM-12D-XX-12V

150/5.91" 25/0.98"
8.33/0.33" 8/0.32"

0.3/0.01" 0.54/0.02" 1.1/0.04"

FL-2216TM-12D-XX-24V

150/5.91" 50/1.97"
8.33/0.33" 8/0.32"

0.3/0.01" 0.54/0.02" 1.1/0.04"

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 03
[email protected]

FL-2216TM-24D-XX-12V

150/5.91" 12.5/0.49"
4.17/0.16" 8/0.32"

0.3/0.1" 0.54/0.02" 1.1/0.04"

FL-2216TM-24D-XX-24V

150/5.91" 25/0.98" 8/0.32"
4.17/0.16"

0.3/0.1" 0.54/0.02" 1.1/0.04"

FL-2216TM-28D-XX-12V

14.29mm/0.563"

150mm/5.906" 3.57mm/0.141" 10.00mm/0.394"

+12VDC +12VDC +12VDC +12VDC +12VDC +12VDC +12VDC +12VDC +12VDC +12VDC
- - - - - -
--- -

0.30mm/0.012" 1.10mm/0.043"

0.54mm/0.021"

FL-2216TM-28D-XX-24V

150mm/5.906" 25.00mm/0.984" 10.00mm/0.394"
3.57mm/0.141"
+24VDC +24VDC +24VDC +24VDC +24VDC
+24VDC - - - -

- -

0.30mm/0.012" 0.54mm/0.021" 1.10mm/0.043"

FL-2216TM-30D-XX-12V

150/5.91" 20/0.79"
3.33/0.13" 10/0.39"

0.3/0.01"0.54/0.02" 1.1/0.04"

FL-2216TM-30D-XX-24V

150/5.91" 20/0.79"
3.33/0.13" 10/0.39"

0.3/0.01"0.54/0.02" 1.1/0.04"

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 04
[email protected]
Wiring diagram

1. Connect red wire of LED strip to posi ve polarity,and connect
black wire to nega ve polarity;

cutting line

2.The LED strip can be cut according to sissors
mark because of different requirements;

3.The cut LED strip can be connected to power supply via
accessories.

Packaging information

Packing box Anti-static bag LED strip+accessories

Installation requirement

The LED strip and accessories can't be squeezed or folded;
PCB conductive parts can't be damaged when installation;
Installation must conform to electrical safety standard. The LED strip can only be installed by professionals;
Ensure power supply transform operating load with transformer;
When install on metal or conductor surface, insulation protection need to be provided to the contact area;
Observe positive and negative polarity, ensure correct connection to avoid damaging LED strip;
When installation, please prevent static electricity;
The product need anti-corrosion environment, such as, avoiding damp, water drop or other adverse elements.

FL- 5050 IP LED strip

FL-5050IP-X
FL-5050IP-X2

5

Features:

1. Double layper pure copper PCB;
2. 3M adhesive tape for easy installation;
3. T or L type connectors for corner connection;
4. Max connection legnth is 10m, 120 degree；
5. Standard 5M on reel
6. 5 years warranty
7. CE, ROHS

Technical parameters:

Model Colour Lumen LED Type LED Qty. Width*Length DC Voltage Rated Watt CRI IP
650 (V) (w/m) >80
640 (leds/m) (mm) 20/64/
600 >80 65/68
White 1400
1380 20/64/
FL-5050IP-X Neutral White 1260 5050 30 10*5000 12/24 7.2 65/68

Warm White

White

FL-5050IP-X2 Neutral White 5050 60 10*5000 12/24 14.4

Warm White

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P1

Model Colour Output LED Type LED Qty. Width*Length DC Voltage Rated Watt CRI IP
R:330-400 (V) (w/m) >80
G:800-1000 5050 (leds/m) (mm) 20/64/
B:330-400 >80 65/68
FL-5050IP-RGB RGB R:330-400 30 10*5000 12/24 7.2
G:800-1000 5050 20/64/
FL-5050IP-RGB2 RGB B:330-400 60 10*5000 12/24 14.4 65/68

FL-5050IPD-X IP64 Slim PU glue potted
FL-5050IPD-X2 IP65 PU glue potted
FL-5050IPP-X IP65 Silicon sleeved
FL-5050IPP-X2 IP68 Silicon extrusion
FL-5050IPS-X
FL-5050IPS-X2
FL-SF-5050IP-X
FL-SF-5050IP-X2

Dimension & Circuit Drawings:

FL-5050IP-X-12V

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P2

FL-5050IP-X2-12V
FL-5050IP-X-24V
FL-5050IP-X2-24V

Connecting&Installation Diagram:

5050IP RGB 24V

1.Connect black wire of LED strip to positive polarity of controller,and other colors match different color
interfaces(the red wire is connected to R interface;the green wire is connected to G interface;the blue
wire is connected to B interface).

2.If such strip is not required, the LED strip can be cut along
scissor mark;

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P3

3.The cut strip can be connected with accessory connectors,then connect to controller;
5050IP single color 12/24V

1.The red wire of LED strip is connected to positive polarity,and the black wire is connected to negative polarity;
2.If such long strip is not required, the LED strip can be cut along scissor mark;

3.The cut strip can be connected with accessory connectors,then connect to power supply.

Packing instruction:

Packing box Anti-static bag LED strip+accessories

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P4

Installation requirement:

1. The LED strip should be installed on the surface of flame retardant,and thickness of wood or material
exceed 2mm;

2. Please read the specification first,to make sure the service environment matches the condition in the
specification before using;

3. The LED strip and accessories can't be squeezed and folded;
4. PCB conductive parts can't be damaged when installation;
5. Installation must conform to electrical safety standard.The LED strip can only be installed by professionals;
6. Pay attention to positive and negative polarities before installation,otherwise the LED strip may be damaged;
7. For security reasons, recommend parallel connection when installation.Ensure power supply transform

operating load with transformer;
8. Cut the LED strip along the logo mark;
9. When install on metal or conductive surface, the contact must adopt insulation protection;
10.Please prevent static electricity when installation.The product need anti-corrosion environment, such as,

avoiding damp , water drop or other adverse elements.

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P5

FL-2216 LED Strip

5

Features:

1. 2216 assembled LEDs;
2. CRI90;
3. cuttable, shortest length is 12.5mm.
4. One bin for production; uniform light
5.High brightness and high density
6.unqiue and strong PCB design
7. 5 years warranty;

Application:

1.Stage lighting;
2.Lighting of festival ,activities,exhibition, etc ;
3.Backlight of signage;
4.Path contour lighting;
5. Light string of LED luminous charcters;
6.Landscape decoration lighting.

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P1

Product electrical parameters：

Model Color Lumen LED Type LED Qty. Beam angle DC Voltage Rated Watt IP CRI
FL-2216IB-XX (w/m) >90
FL-2216IB-XX2 ( leds /m) (degree ) (V)

W 830

WW 720 2216 120 120 12/24 9.6

NW 790 20/64/65/68
W 1630

WW 1400 2216 240 120 12/24 19.2

NW 1530

FL-2216IBD-XX2 FL-2216IBD-XX2 IP64 Slim PU glue potted
FL-2216IBD-XX FL-2216IBD-XX
FL-2216IBS-XX IP65 Silicon sleeved
FL-2216IBP-XX IP65 PU glue potted
FL-SF-2216IB-XX IP68 Silicon extrusion and glued

Accessories Table:

FL-C1-8 FL-C2-8 FL-C3 L-connector T-connector CON-1-8 CON-2-8 CON-3-8

Model

FL-2216IB-XX
Note:If you want order ETL version,the wire could be difference

Dimension:

Unit: mm/inch

FL-2216IB-XX-12V

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P2

FL-2216IB-XX-24V
FL-2216IB-XX2-12V
FL-2216IB-XX2-24V

Connecting & Installation Diagram:

Power

1. Connect red wire of strip to positive polarity of
power supply, and connect black wire to negative
polarity;

2. If don't need so long strip, it can be cut
short according to the scissors mark;

Power

3. The cut strips can be connected via accessories connectors,
and then the strips are connected to power supply.

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P3

Packing instruction:

Packing box Anti-static bag LED strip + accessories

Notice

1. The LED strip and other accessories can be squeezed;
2. Transduction parts of PCB can't be damaged during installation;
3. Installation of LED strip must conform to electrical safety standards, and only
professionals can perform installation;
4. Ensure power supply load employ transformer;
5. When the LED strip is installed on metal or conductor surface, the contact
surface must be processed with insulation;
6. Identify positive polarity and negative polarity before installation to avoid LED
strip damage;
7. During installation, pay attention to preventing electrostatic;
8. The product need anti-corrosion environment, such as: avoid damp water drop
or other adverse factor.

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P4

Flexmond Plus Series

2110 High Density LED Strip

912Leds/M

640Leds/M

400Leds/M

320Leds/M

Available colors

W NW WW

5

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 02
[email protected]

Features

2110 assembled LEDs;
CRI90;
CE, RoHS, 5 years warranty;
No-dot design suitable for all optic covers;
Short cut section for more flexible installation ;
Innovative design on circuit board for rough bending;
Highest intensity up to 2900lm/M;
Fit to various aluminum profiles.

Application

Stage lighting
Festival, activities, exhibition lighting, etc
Backlight of signage
Contour lighting
Landscape decoration lighting

Technical Parameters

Model Color Lumen LED Qty. Rated Wa LED LED Type Beam Angle DC Voltage IP CRI
FL-2110-32D-XX (leds/m) (w/m) CCT Range 2110 20/64/65 90
FL-2110-40D-XX W 1900 (degree) (V)
FL-2110-64D-XX NW 1800 320 19.2 W(5750-6250K)
FL-2110-912-XX WW 1700 NW(3800-4200K) 20/64/65/68
400 20 WW(2600-3100K) 120 12/24
W 2000
NW 1900 640 24 20
WW 1800
912 28.8
W 2650
NW 2450
WW 2350

W 2900
NW 2800
WW 2700

IP IP20 IP64 Silicon potted IP65 Slim silicon extrusion IP68
LED Qty. (No CCT shift)
Non-waterproof Slim silicon potted Silicon sleeved Silicon extrusion
320 Leds/m (NO CCT shift)
1.4mm 2.8mm 4mm
400 Leds/m 0.06" 0.11" FL-2110P-32D-XX 0.16"

640 Leds/m 6mm/0.24" 6mm/0.24" 4.3mm 8mm/0.31" 5mm 6mm
0.17" 0.20" 0.24"
912 Leds/m FL-2110-32D-XX FL-2110D-32D-XX FL-2110S-32D-XX
10mm/0.39" 10mm/0.39" 12mm/0.47"
1.4mm 2.8mm 4mm
0.06" 0.11" FL-2110P-40D-XX 0.16" FL-AT-2110-40D-XX FL-SF-2110-40D-XX

8mm/0.31" 8mm/0.31" 11mm/0.43"

FL-2110-40D-XX FL-2110D-40D-XX FL-2110S-40D-XX

1.4mm
0.06"

10mm/0.39"

FL-2110-64D-XX

1.4mm
0.06"

12mm/0.47"

FL-2110-912-XX

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 03
[email protected]

Color Temperature Deviation

Color IP20 IP65 IP65 IP64 IP65&IP68

WW Non-waterproof Silicon sleeved Silicon po ed Slim silicon po ed Silicon extrusion
NW
W 2700K 2550K 3400K 3450K 2500K
4300K 4150K 6350K 6200K 4050K
6350K 6100K 12750K 12250K 6000K

Dimensions 12.5mm/0.492" RR R

FL-2110-32D-XX R DC 12V 6mm/0.236"

12V DC 12V

DC 12V DC 12V

5m/16.4'

25mm/0.984"

24V DC 24V R DC 24V R

6mm/0.236"

5m/16.4'

FL-2110-40D-XX 10mm/0.398" R RR R
12V
R 8mm/0.315"

DC 12V DC 12V DC 12V DC 12V R

3m/9.84' 8mm/0.315"

24V 20mm/0.787" R

R DC 24V

DC 24V 3m/9.84'

FL-2110-64D-XX

6.3mm/0.248"

12V

R R R R R R R R 10mm/0.394"
12V
12V
12V
12V
12V
12V
12V

24V 12.5mm/0.492" DC 24V 3m/9.84' DC 24V

DC 24V R DC 24V R 10mm/0.394"

R R

3m/9.84'

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 04
[email protected]

FL-2110-912-XX 13.15mm/0.517" DC 12V DC 12V DC 12V
12V
DC 12V R R 12mm/0.472"

R

3m/9.84'

26.3mm/1.035"

DC 24V DC 24V

24V RRR RRR

12mm/0.472"

3m/9.84'

Wiring Diagram

POWER red
black

1. Connect the red wire of LED strip to posi ve polarity,and connect
the black wire to nega ve polarity;

cutting line

2. The LED strip can be cut according to sissors
mark because of different requirements;

POWER 3. The cut LED strip can be connected to power supply via
accessories.
Packaging Information

LED strip Anti-static bag Packing box

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 05
[email protected]

Installation Requirement

The LED strip and accessories can't be squeezed or folded.
PCB conductive parts can't be damaged when installation.
Installation must conform to electrical safety standard. The LED strip can only be installed by professionals.
Ensure power supply transform operating load with transformer.
When install on metal or conductor surface, insulation protection need to be provided to the contact area.
Observe positive and negative polarity, ensure correct connection to avoid damaging LED strip.
When installation, please prevent static electricity.
The product need anti-corrosion environment, such as, avoiding damp, water drop or other adverse elements.
The product should work with aluminum profile.

FL-YID

Hybrid TM

Great advantages

eco friendly
long life span,standard warranty 5 years
complete cut / connection accessories
no need of constant-current power feed
low power consumption
custom packing
white and warm white interlaced arrangement
CCT can be adjusted, wider CCT range
can display several changing patterns with a controller and remote

Dimensions (Unit: mm/inch) RoHS warranty 5 years

COMPLIANT

5000/196.8"
Cutting line
6/.24" 8.33/.33"2.4/.09" +
150/5.9" 50/1.97" 0.25/.01"

+ 10/.39"++++ +++ +

W WW WW WW W DC 12v
WW WW WW WW WW WW
WW WW

ww
w

Applications 1m 242LUX
2m 119LUX
Cove lighting 3m 73LUX
Architectural lights for canopy, corridor, window, archway
Backlight or edge lighting for signage
DIY lights for home use
Path and contour marking
Decorative lights for holiday, event, show, exhibition

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P1

Technical parameters

Model Number Color Length LED LED Type Light Output Beam Angle Voltage Current Max. Power Continuous
FL-YID-W/WW (m) Q’ty (lumen/m) (degrees) (V DC) (Amps/m) Consumption IP Connection
FL-YID-W/WW-24V White 5
& 300 (W/m) (m)
5 300
Warm white 3528 SMD 390 120 12 0.8 9.6 20 10
300 LED 300 120
White 300 390 24 0.4 9.6 20 10
& 3528 SMD 300
LED
Warm white

Linking operation

++

WW

WW WW

+ + ++ +

W W WW W
WW WW WW WW WW

++

WW
WW WW

12

Connection

type 4

3 + +
5 W W
WW WW

+ ++ +

W WW W

WW WW WW WW

++ DC12V
Power
WW
WW WW

+
W
WW

Installation Drawing

Dim on

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P2

Safety Information

- The strip itself and all its components may not be mechanically stressed.
- Assembly must not damage or destroy conducting paths on the circuit board.
- Installation of LED ribbon (with power supplies) needs to be made with regard to all applicable

electrical and safety standards. Only qualified personnel should be allowed to perform installations.
- Correct electrical polarity needs to be observed. Wrong polarity may destroy the strip.
- Parallel connection is highly recommended as safe electrical operation mode.
- Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload

and damage the strip.
- Please ensure that the power supply is of adapters power to operate the total load.
- When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical

isolation points between strip and the mounting surface.
- Pay attention to standard ESD precautions when installing the strip.
- Damaged by corrosion will not be honored as a materials defect claim.

It is the user’s responsibility to provide suitable protection against corrosive agents such as
moisture and condensation and other harmful elements.

Packing information

PART NUMBER BAR CODE
COLOR
QUANTITY
DATE
COLOR BIN:
Supplier information

Label

RoHS LED flexible strip with reel

Anti-static foil bag

Carton box

Connectors

LED flexi strip

Adhesive tape 22 AWG wire

Connector wire

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P3

FL-YID2-W+WW RoHS warranty 5 years

HybridTM COMPLIANT

Great advantages

Connective structure with double colors, can adjust the light freely.
Eco friendly and energy-saving;Low power consumption, low heat.
Long life span, more than 5 years.
Complete cut/connection accessories.
No need of constant current power supply.
Easy installation and maintenance.
Anti-static sealed package.
Attached with 3M tape on the back.

Dimensions (Unit: mm/inch)

150/5.9 150/5.9

Applications

Cove lighting
Architectural lights for canopy, corridor, window, archway
Backlight or edge lighting for signage
DIY lights for home use
Path and contour marking
Decorative lights for holiday, event, show, exhibition

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P1

Technical parameters

Model Number Color Length LED LED Type Light Output Beam Angle Voltage Current Max. Power Continuous
FL-YID2-W+WW (m) Q’ty (lumen/m) (degrees) (V DC) (Amps/m) Consumption IP Connection
FL-YID2-W+WW-24 White
& (W/m) (m)
20 10
Warm white 3528 SMD 420
LED 20 10
White 5 300 120 12 0.8 9.6
& 120
450
Warm white
5 300 3528 SMD 420 24 0.4 9.6
LED 450

Linking operation

++

WW

WW WW

+ + ++ +

W W WW W
WW WW WW WW WW

WW WW ++

12 WW

Connection

type 4

3 + +
5 W W
WW WW

+ ++ +

W WW W

WW WW WW WW

++ WW WW

WW DC12V
Power
+
W
WW

Installation Drawing

Dim on

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P2

Safety Information

- The strip itself and all its components may not be mechanically stressed.
- Assembly must not damage or destroy conducting paths on the circuit board.
- Installation of LED ribbon (with power supplies) needs to be made with regard to all applicable

electrical and safety standards. Only qualified personnel should be allowed to perform installations.
- Correct electrical polarity needs to be observed. Wrong polarity may destroy the strip.
- Parallel connection is highly recommended as safe electrical operation mode.
- Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload

and damage the strip.
- Please ensure that the power supply is of adapters power to operate the total load.
- When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical

isolation points between strip and the mounting surface.
- Pay attention to standard ESD precautions when installing the strip.
- Damaged by corrosion will not be honored as a materials defect claim.

It is the user’s responsibility to provide suitable protection against corrosive agents such as
moisture and condensation and other harmful elements.

Packing information

PART NUMBER BAR CODE
COLOR
QUANTITY
DATE
COLOR BIN:
Supplier information

Label

RoHS LED flexible strip with reel

Anti-static foil bag

Carton box

Connectors

LED flexi strip

Adhesive tape 22 AWG wire

Connector wire

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P3

5225 High bright 2-in-1
Hybird LED strip

FL-YID3-W+WW-12

Features:

1. 5225assembled LED
2. 12V DC, 28.8W/M max
3. 60LED/M, min cut 50mm
4. 6000+3000K
5. IP20
6. Max length: 5m
7. Note: work with aluminum heat sink.
8. CE，ROHS, 5 years warranty

5

Application:

Advertising billboard, backlit decoration, architecture, bar, dance hall, wine cabinet, floor,ceiling,etc.

Technical parameters:

Model Width Max.Length Min.Length LED LED Qty. DC Voltage Max. Power Luminous Flux Color
Type (w/m)
(mm) (m) (mm) (pcs/m) (V) (lm/m)
5225
FL-YID3-W+WW-12 10 5 50 60 12 28.8 1289 W
1366 WW

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P1

Dimension (Unit:mm):

FL-YID3

Installation requirement:

1. Installed on flame-retardant surface, wood and material exceed 2mm thickness
2. Please first read the product specification carefully, make sure the using environment conform to

specification, then it can be used
3. Confirm input voltage and power off before use
4. Series conneciton can't exceed 3m, and the strip must be used with aluminum profile and other radiators
5. Cut the strip according logo on the strip

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P2

FL-4040-RGB

Available colors

5

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 02
[email protected]

Features

4040 assembled LEDs ;
CE, ROHS, 5 years warranty ;
The LED strip can be cut to meet requirements of different length ;
More concentrated lighting effect, better mixed light effect ;
The bracket of LEDs is more reliable. And the light source is arranged more closely, thus there is no light spot in the
light, which makes the LED strip more suitable to be used in smaller space.

Application

Stage lighting;
Festival, activities, exhibition lighting, etc;
Backlight of signage;
Contour lighting;
LED luminous characters;
Landscape decoration lighting.

Technical parameters

Model Color LED Type LED Qty. Beam angle DC Voltage Rated Wa IP CRI
FL-4040-RGB-120D RGB 4040 ( leds /m) (degree ) (V) (w/m) 20//64/65/68 /

120 120 12/24 22

FL-4040RGB-120D FL-4040D-RGB-120D IP64 Slim PU glue po ed
FL-4040P-RGB-120D
FL-4040S-RGB-120D PU glue po ed
FL-SF-4040-RGB-120D IP65

Silicon sleeved

IP68 Silicon extrusion and glued

Dimensions (unit: mm/inch) 5000/196.85"

FL-4040RGB-120LED-12V

25/0.98" 1.5/0.06"
0.3/0.02"
150/5.91" 8.3/0.33"
12/0.47"

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 03
[email protected]
FL-4040RGB-120LED-24V 5000/196.85" + DC24V
B
150/5.91" 50/1.97"1.5/0.06" G
8.3/0.33"0.3/0.02"
+ DC24V R
B 12/0.47"+ DC24V+ DC24V+ DC24V
G
B B B
R G G G

R R R

Wiring diagram

Power RGB
supply controller

1.Connect black wire of LED strip to positive polarity of controller, and other colors match different color
interfaces (the red wire is connected to R interface; the green wire is connected to G interface; the blue wire
is connected to B interface);

scissor mark

2.The LED strip can be cut along scissor mark;

Power RGB
supply controller

3. The cut strip can be connected with accessories and connectors, then connected to power supply.

Packaging information

Packing box Anti-static bag LED strip+accessories

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 04
[email protected]

Installation requirement

The LED strip and accessories can't be squeezed or folded;
PCB conductive parts can't be damaged when installation;
Installation must conform to electrical safety standard. The LED strip can only be installed by professionals;
Ensure power supply transform operating load with transformer;
When install on metal or conductor surface, insulation protection need to be provided to the contact area;
Observe positive and negative polarity, ensure correct connection to avoid damaging LED strip;
When installation, please prevent static electricity;
The product needs anti-corrosion environment, such as, avoiding damp, water drop or other adverse elements.

FL-OID

Great advantages OID2

Eco friendly

Long life span,standard warranty 5 years

Complete cut / connection accessories

No need of constant-current power feed

low power consumption OID3

Custom packing

CCT can be adjusted, wider CCT range

Can display several changing patterns with a controller and remote

Dimensions (Unit: mm) RoHS warranty 5 years

COMPLIANT

+

FL-OID2 L1 R G B L1 R G B
L2 R G B L2 R G B
DC L3 R G B
12V L3 R G B

-

FL-OID3 + L1 R G B
L2 R G B
L1 R G B L3 R G B
L2 R G B L4 R G B
L5 R G B
DC L3 R G B
24V L4 R G B

L5 R G B

-

Applications

Cove lighting
Architectural lights for canopy, corridor, window, archway
Backlight or edge lighting for signage
DIY lights for home use
Path and contour marking
Decorative lights for holiday, event, show, exhibition

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P1

Technical parameters

Model Number Color LED Q’ty LED Type Light Output Beam Angle Voltage Current Max. Power IP Continuous
(pcs/m) (lumen/m) (degrees) (V DC) (Amps/m) Consumption Connection
FL-OID2-W RGB+White
FL-OID2-NW RGB+Natural White 1120 (W/m) (m)
FL-OID2-WW RGB+Warm White 1050
FL-OID3-W 30RGB+30W 5050 SMD LED 120 12/24 1.2/0.6 14.4 20 5
FL-OID3-NW RGB+White 30RGB+30NW 5050 SMD LED 1000
FL-OID3-WW RGB+Natural White
RGB+Warm White 30RGB+30WW 5050 SMD LED 1020

20RGB+40W 5050 SMD LED 950
900
20RGB+40NW 5050 SMD LED 120 12/24 1.2/0.6 14.4 20 5
20RGB+40WW 5050 SMD LED

Linking operation

++

WW

WW WW

+ + ++ +

W W WW W
WW
WW WW WW WW

WW WW ++

12 WW

Connection

3 type 4

+ +
W W
WW WW

+ ++ + 5

W WW W

WW WW WW WW

++ WW WW

WW DC12V
Power
+
W
WW

Installation Drawing

Dim on

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P2

Safety Information

- The strip itself and all its components may not be mechanically stressed.
- Assembly must not damage or destroy conducting paths on the circuit board.
- Installation of LED ribbon (with power supplies) needs to be made with regard to all applicable

electrical and safety standards. Only qualified personnel should be allowed to perform installations.
- Correct electrical polarity needs to be observed. Wrong polarity may destroy the strip.
- Parallel connection is highly recommended as safe electrical operation mode.
- Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload

and damage the strip.
- Please ensure that the power supply is of adapters power to operate the total load.
- When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical

isolation points between strip and the mounting surface.
- Pay attention to standard ESD precautions when installing the strip.
- Damaged by corrosion will not be honored as a materials defect claim.

It is the user’s responsibility to provide suitable protection against corrosive agents such as
moisture and condensation and other harmful elements.

Packing information

PART NUMBER BAR CODE
COLOR
QUANTITY
DATE
COLOR BIN:
Supplier information

Label

RoHS LED flexible strip with reel

Anti-static foil bag

Carton box

Connectors

LED flexi strip

Adhesive tape 22 AWG wire

Connector wire

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P3

FL-DOID RoHS warranty 5 years

Application COMPLIANT

Cove lighting
Architectural lights for canopy,corridor,windoe,archway
Backlight or edge lighting for signage
DIY lights for home use
Path and contour marking
Decorative lights for holiday,event,show,exhibition

Great advantages

eco friendly
long life span,standard warranty 5 years
complete cut / connection accessories
no need of constant-current power feed
low power consumption
custom packing

Technical parameters

Model Number Color Length LED LED Type Light Output Beam Angle Voltage Current Max. Power IP Continuous
FL-DOID2-W (m) Q’ty (lumen/m) (degrees) (V DC) (Amps/m) Consumption Connection
FL-DOID2-NW
(W/m) (m)

White 5 300 1400 120 12 1.2 14.4 65 10

Natural White 5 300 1300 120 12 1.2 14.4 65 10

FL-DOID2-WW Warm white 5 300 1240 120 12 1.2 14.4 65 10

FL-DOID2-R Red 5 300 720 120 12 1.2 14.4 65 10

FL-DOID2-Y White 5 300 720 120 12 1.2 14.4 65 10
FL-DOID2-B Natural White 5 300
360 120 12 1.2 14.4 65 10

FL-DOID2-G Warm white 5 300 1200 120 12 1.2 14.4 65 10
FL-DOID2-W-24V White 5050 1400 120 24 0.6 14.4 65 10
FL-DOID2-NW-24V 5 1300 120 24 0.6 14.4 65 10
Natural White 5 300 Epistar

300

FL-DOID2-WW-24V Warm white 5 300 1240 120 24 0.6 14.4 65 10

FL-DOID2-R-24V Red 5 300 720 120 24 0.6 14.4 65 10

FL-DOID2-Y-24V White 5 300 720 120 24 0.6 14.4 65 10
FL-DOID2-B-24V Natural White 5 300
360 120 24 0.6 14.4 65 10

FL-DOID2-G-24V Warm white 5 300 1200 120 24 0.6 14.4 65 10

5000mm/198.41"

150mm/5.9" 100mm/3.96" 16.7mm/0.66" 150mm/5.9"

12mm/0.476" DC 12V

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P1

Linking operation

100~220V 55001000mmmm 8
100~220V 50mmm

Cutting line

Power

50mm Cutable every

+ (50mm)
B
DC 12V G Cutting line
R
++ ++ +
BB
GG BB B
RR GG G
RR R

Packing information

PART NUMBER BAR CODE
COLOR
QUANTITY
DATE
COLOR BIN:
Supplier information

Label

RoHS LED flexible strip with reel

Anti-static foil bag

Carton box

RGB LED flexi strip

Adhesive tape Vertical connector

Safety Information

- The strip itself and all its components may not be mechanically stressed.
- Assembly must not damage or destroy conducting paths on the circuit board.
- Installation of LED ribbon (with power supplies) needs to be made with regard to all applicable electrical

and safety standards.
Only qualified personnel should be allowed to perform installations.
- Correct electrical polarity needs to be observed. Wrong polarity may destroy the strip.
- Parallel connection is highly recommended as safe electrical operation mode.
- Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload and
damage the strip.
- Please ensure that the power supply is of adapters power to operate the total load.
- When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical isolation
points between strip and the mounting surface.
- Pay attention to standard ESD precautions when installing the strip.
- Damaged by corrosion will not be honored as a materials defect claim.
It is the user’s responsibility to provide suitable protection against corrosive agents such as moisture and
condensation and other harmful elements.

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P2

FL-OID4

DC 12V

Great advantages

Eco friendly DC 24V
Long life span,standard warranty 5 years
Complete cut / connection accessories
No need of constant-current power feed
low power consumption
Custom packing
CCT can be adjusted, wider CCT range
Can display several changing patterns with a controller and remote

Dimensions (Unit: mm) RoHS warranty 5 years

COMPLIANT

DC 12V

DC 24V

Applications

Cove lighting
Architectural lights for canopy, corridor, window, archway
Backlight or edge lighting for signage
DIY lights for home use
Path and contour marking
Decorative lights for holiday, event, show, exhibition

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P1

Technical parameters

Model Number Color Length LED Q’ty LED Type Light Output Beam Angle Voltage Current Max. Power IP Continuous
(m) (pcs/m) (lumen/m) (degrees) (V DC) (Amps/m) Consumption Connection
FL-OID4-W-12 5050 SMD LED
FL-OID4-NW-12 60 5050 SMD LED 900 (W/m) (m)
FL-OID4-WW-12 60 5050 SMD LED 880
FL-OID4-W-24 RGB+White 5 5050 SMD LED 120 12 1.6 19.2 20 10
FL-OID4-NW-24 RGB+Natural White 5 60 5050 SMD LED 850
FL-OID4-WW-24 RGB+Warm White 5 60 5050 SMD LED 900 120 24 0.8 19.2 20 10
5 60 880
RGB+White 5 60 850
RGB+Natural White 5
RGB+Warm White

Installation Drawing

Dim on

Packing information

PART NUMBER BAR CODE
COLOR
QUANTITY
DATE
COLOR BIN:
Supplier information

Label

RoHS LED flexible strip with reel

Anti-static foil bag

Carton box
Connectors

LED flexi strip

Adhesive tape 22 AWG wire

Connector wire

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P2

Safety Information

- The strip itself and all its components may not be mechanically stressed.
- Assembly must not damage or destroy conducting paths on the circuit board.
- Installation of LED ribbon (with power supplies) needs to be made with regard to all applicable

electrical and safety standards. Only qualified personnel should be allowed to perform installations.
- Correct electrical polarity needs to be observed. Wrong polarity may destroy the strip.
- Parallel connection is highly recommended as safe electrical operation mode.
- Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload

and damage the strip.
- Please ensure that the power supply is of adapters power to operate the total load.
- When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical

isolation points between strip and the mounting surface.
- Pay attention to standard ESD precautions when installing the strip.
- Damaged by corrosion will not be honored as a materials defect claim.

It is the user’s responsibility to provide suitable protection against corrosive agents such as
moisture and condensation and other harmful elements.

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P3

FL-OID5-X

5

Features:

1. 5050 assembled LEDs ;
2. CRI 80, 5 colors mixed to reach 65536 colors, and the LED strip is equipped with special controller to

control 52 kinds of variable modes;
3. In order to meet the needs of different lengths by cutting off the connections, the minimum shear length of

the 12V rod is 50mm, and the minimum shear length of 24V is 100mm; The change of the length of the
self-defined shear length can be the integer double of the minimum cut length. 12 V / 24 VDC;
4. CE, RoHS compliant, 5 years warranty.

Application:

1. Stage lighting
2. Festival,activities,exhibition lighting,etc
3. Backlight of signage
4. Contour lighting
5. LED luminous characters
6. Landscape decoration lighting

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P1

Technical parameters：

Model Color Lumen LED Type LED Qty. Beam angle DC Voltage Rated Watt IP CRI
(w/m) 20 80
(leds/m) (degree) (V)

R 78 5050 60 120 12/24V 4.8

G 340 5050 60 120 12/24V 4.8

B 63 5050 60 120 12/24V 4.8

RGB 453 5050 60 120 12/24V 14.4

FL-OID5-12V/24V RGB+
WW+W
1528 5050 60 120 12/24V 28.8

W 721 5050 60 120 12/24V 7.2
WW 528 5050 60 120 12/24V 7.2

The product is equipped with MINI controller of 5-channel
(LC-RGBW-D4-04)

1.Controller description

The controller adopts high performance processor, and control switch, mode change,
brightness, and speed via 2.4G remote controller; the grouping and DIY setting can be realized via
remote controller; exquisite dimming, no flicker, and brightness/speed with memory function.

2.Technical parameters

Input voltage:12V-24V DC Operating temperature: -30°C-45°C
Ingress protection: IP20
Output channel: 5 channels Remote distance: 40m (in open condition)
Output current: 3A for single channel,

and 6A for 5 channels
Output power:72W(12V)-144W(24V)

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P2

brightness speed +/- on/off key
grouping mode
mode switch speed +/-
DIY mode
DIY color brightness+/- DIY mode save
CCT choose

1.Matching of remote controller

(1) Power off;
(2) Power on controller again;
(3) Press any key to be matched in 5 seconds, and match finish.

2.Matching steps of remote controller

(1) Power on the first controller, touch “group 1”on remote controller in 5 seconds, then remote
controller and the first controller are matched the first group; if you want to add more
controllers in the group, just repeat above operation.

(2) Get the second controller, power on, touch “group 2” on remote controller in 5 seconds, then
the remote controller and the second controller are matched the second group; if you want to
add more controllers in the group, just repeat above operation. And so on, the third group, the
fourth group, the fifth group, the sixth group, the seventh group, the eighth group can be
matched.

(3) There are 8 groups of controller, if you want to control the first group, only touch “group 1” ,
then you can perform dimming operation on the first group; if you want to control the second
group, only touch “group 2” , then you can perform dimming operation on the second group;
and so on.

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P3

3.How to realized DIY setting on remote controller

(1) Press any key of DIY1- DIY5 on remote controller;
(2) Press any DIY color, color brightness +/-;
(3) After choose color brightness, press save key on remote controller to save.

Dimension:

Unit:(mm)

100 5000

16.67 + + 24V DC 24V
WW
+ 24V BB
W RR
B GG
R WW WW
G
WW

2.54
2.15

50 3000
16.67
+ + 12V
+ 12V + + 12V WW + + 12V + DC 12V
W WW BB WW W
RR
B BB GG BB B
R RR WW WW RR
G GG GG R
WW WW WW WW WW
G

WW

2.54
2.15

Connection diagram :

power
supply

Remote controller

A remote controller can control 8 LED strips
at the same time.

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P4

Packing instruction:

Packing box Anti-static bag LED strip+controller

Installation requirement:

1. The LED strip and accessories can't be squeezed or folded;
2. PCB conductive parts can't be damaged when installation;
3. Installation must conform to electrical safety standard. The LED strip can only be installed by professionals;
4. Ensure power supply transform operating load with transformer;
5. When install on metal or conductor surface, insulation protection need to be provided to the contact area;
6. Observe positive and negative polarity, ensure correct connection to avoid damaging LED strip;
7. When installation, please prevent static electricity;
8. The product need anti-corrosion environment, such as, avoiding damp, water drop or other adverse

elements.

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P5

FL-SID-3014-XX

5pcs/reel

Features:

1.3014 side view LED
2.CRI80
3. Can be cut to meet requirements of different length Epistar chip
4. Cuttable,bendable for side application
5.12V/24V DC

Features:

1.Side view lighting
2. Stage lighting
3. Festival, activities, exhibition lighting, etc
4. Backlight of signage
5. Contour lighting
6. Landscape decoration lighting

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P1

Technical parameters:

Model Color Lumen LED Type LED Qty. Beam angle DC Voltage Rated Watt IP CRI
FL-SID-3014-X (w/m) 20/65 80
( leds /m) (degree ) (V)

W 720

WW 600 3014 60 120 12/24 4.8

NW 660

FL-SID-3014-X FL-SIDS-3014-X IP65 Silicon sleeved

Dimension:

Unit:(mm)
FL-3014-60LED-12V

FL-3014-60LED-24V-C

Connection diagram:

1. Connect red wire of strip to positive polarity of
power supply, and connect black wire to negative
polarity;

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P2

2. If don't need so long strip, it can be cut
short according to the scissors mark;

3. The cut strips can be connected via accessories connectors,
and then the strips are connected to power supply.

Packing instruction:

Packing box Anti-static bag LED strip + accessories

Notice

1. The LED strip and accessories can't be squeezed or folded;
2. PCB conductive parts can't be damaged when installation;
3. Installation must conform to electrical safety standard. The LED strip can only be installed by
professionals;
4. Ensure power supply transform operating load with transformer;
5. When install on metal or conductor surface, insulation protection need to be provided to the
contact area;
6. Observe positive and negative polarity, ensure correct connection to avoid damaging LED strip;
7. When installation, please prevent static electricity;
8. The product need anti-corrosion environment, such as, avoiding damp, water drop or other
adverse elements.

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P3

FL-SW4-XX-24

Available colors Clamp Shape

5

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 02
[email protected]

Features

IP67
2835 LED
7.6W/M
24V DC
CRI >80
Dot-free illumination
Side View: Bend direction horizontally
Indoor and outdoor application
Dimension:4×11mm
Silica gel

Technical parameters

Model Luminous Flux Max.Length Min.Length DC Voltage LED Qty. Rated Wa
FL-SW4-W-24 (lm/m) (m) (m) (V) (pcs/m) (w/m)

230 5 0.0625 DC24 128 7.6

FL-SW4-NW-24 200

FL-SW4-WW-24 185

Dimensions (unit: mm) 5000 10
4
6 15

7 14
4

11
7 14

11

Installation diagram

1. As figure 1, dig a 11*4mm groove on the wall according to the shape needed;

4
11

2. As figure 2, press the LED strip into groove and finish the installation.