LED Strips 2020 | Finlight Group Oy

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 03
[email protected]

Installation Diagram of Clamp Shape

As shown in diagram 1, put the LED strip into the clamp.

1

As shown in diagram 2, bend the LED strip into the shape needed, then bend the screw hole so as to

1:3 1:3
2

Installation Precautions Minimum bend diameter
20mm
Do not twist like this.
Luminous surface of LED
Can't be installed like this strip
Can't be installed like this
Can't be installed like this
Can't be installed like this
Can be installed like this

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 04
[email protected]
Wrong bend luminous surface correct bend
luminous surface
Wrong bend luminous surface correct bend

Packaging information

Packing box Anti-static bag LED strip+accessories

Installation requirement

Install the LED strip on flame-retardant surface, thickness of wood and material exceed 2mm;
Please read the specification first, to make sure the service environment matches the conditions in the specification
before using;
The LED strip and other accessories cann’t be extruded and folded;
The conducting components of PCB can’t be damaged;
Installation of LED strip must comply with electrical safety standard.Only professionals can install the LED strip;
Install the strip according to correct positive and negative polarity, otherwise the strip will be damaged;
For safety, recommend parallel connection;ensure power supply operate load with transformer;
Cut LED stip according to Logo on the LED strip;
When install on the metalic surface or conductive surface,deal the touch area with insulation;
Please pay attention to preventing electrostatic during installation. The product can only be used in corrosion-proof
environment, which avoid damp, water drop or other disadvantage elements.
Serial connection can't exceed the max. length, and IE3 must be used with aluminum profile and other radiators;
Cut LED strip according to the mark logo.

FL-SSE-XX-24V

Available colors

5

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 02
[email protected]

Features

IP67
3014 LED
8.5W/M
24V DC
CRI >80
Dot-free illumination
Side View: Bend direction horizontally
Indoor and outdoor application
Dimension:8×12mm
Silica gel

Technical parameters

Model Luminous Flux Max.Length Min.Length DC Voltage LED Qty. Rated Wa Rated Current
FL-SSE-W-24V (lm/m) (m) (mm) (V) (pcs/m) (w/m) (A/M)

304.8 55.5 DC24 126

FL-SSE-NW-24V 339.8 5 8.5 0.35

FL-SSE-WW-24V 259.4

Dimensions (unit: mm) 5000 15
8.5
27

11.5 15 11.5
8.5 12

12 15

15
12

Installation diagram Base line which will be used in installing
lamp
1. Pull a parallel string on which the LED strip will be installed, as figure 1

surface which strip will be installed on
(inverse,vertical,horizontal or 90° vertically)

2. Fix the clip on the base line, and the distance depends on practical situation, as figure 2

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 03
[email protected]

3. After the clip is fixed, insert the LED strip into the slot with luminous surface closing to the thumb, as figure 3

4. Connect power wire and finish the installation, as figure 4

the cabinet can hold one or mutiple control Special control cabinet of LED lamp power
power supply supply

HigDhaVnogletra!ge!

Installation Precautions Minimum bend diameter
100mm/3.94''
Do not twist like this.
Luminous surface of LED
Can't be installed like this strip
Can't be installed like this
Can't be installed like this
Can't be installed like this
Can be installed like this

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 04
[email protected]
Wrong bend luminous surface correct bend
luminous surface
Wrong bend luminous surface correct bend

Packaging information

Packing box Anti-static bag LED strip+accessories

Installation requirement

Install the LED strip on flame-retardant surface, thickness of wood and material exceed 2mm;
Please read the specification first, to make sure the service environment matches the conditions in the specification
before using;
The LED strip and other accessories cann’t be extruded and folded;
The conducting components of PCB can’t be damaged;
Installation of LED strip must comply with electrical safety standard.Only professionals can install the LED strip;
Install the strip according to correct positive and negative polarity, otherwise the strip will be damaged;
For safety, recommend parallel connection;ensure power supply operate load with transformer;
Cut LED stip according to Logo on the LED strip;
When install on the metalic surface or conductive surface,deal the touch area with insulation;
Please pay attention to preventing electrostatic during installation. The product can only be used in corrosion-proof
environment, which avoid damp, water drop or other disadvantage elements.
Serial connection can't exceed the max. length, and IE3 must be used with aluminum profile and other radiators;
Cut LED strip according to the mark logo.

FL-TSE-XX-24V

Available colors

5

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 02
[email protected]

Features

IP67
3014 LED
8.5W/M
24V DC
CRI >80
Dot-free illumination
Top View: Bend direction vertically
Indoor and outdoor application
Dimension:12×8mm
Silica gel

Technical parameters

Model Luminous Flux Max.Length Min.Length DC Voltage LED Qty. Rated Wa Rated Current
FL-TSE-W-24V (lm/m) (m) (mm) (V) (pcs/m) (w/m) (A/M)

623.8 55.5 DC24 126

FLL-TSE-NW-24V 604.0 5 8.5 0.35

FL-TSE-WW-24V 547.4

Dimensions (unit: mm) 5000 10

50 24

15 12 11 15
8
11 12
8

Installation diagram Base line which will be used in installing
lamp
1. Pull a parallel string on which the LED strip will be installed, as figure 1

surface which strip will be installed on
(inverse,vertical,horizontal or 90° vertically)

2. Fix the clip on the base line, and the distance depends on practical situation, as figure 2

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 03
[email protected]

3. After the clip is fixed, insert the LED strip into the slot with luminous surface closing to the thumb, as figure 3

4. Connect power wire and finish the installation, as figure 4

the cabinet can hold one or mutiple control Special control cabinet of LED lamp power
power supply supply

HigDhaVnogletra!ge!

Installation Precautions Minimum bend diameter
100mm/3.94''
Do not twist like this.
Luminous surface of LED
Can't be installed like this strip
Can't be installed like this
Can't be installed like this
Can't be installed like this
Can be installed like this

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 04
[email protected]
correct bend luminous surface Wrong bend
luminous surface
correct bend luminous surface Wrong bend

Packaging information

Packing box Anti-static bag LED strip+accessories

Installation requirement

Install the LED strip on flame-retardant surface, thickness of wood and material exceed 2mm;
Please read the specification first, to make sure the service environment matches the conditions in the specification
before using;
The LED strip and other accessories cann’t be extruded and folded;
The conducting components of PCB can’t be damaged;
Installation of LED strip must comply with electrical safety standard.Only professionals can install the LED strip;
Install the strip according to correct positive and negative polarity, otherwise the strip will be damaged;
For safety, recommend parallel connection;ensure power supply operate load with transformer;
Cut LED stip according to Logo on the LED strip;
When install on the metalic surface or conductive surface,deal the touch area with insulation;
Please pay attention to preventing electrostatic during installation. The product can only be used in corrosion-proof
environment, which avoid damp, water drop or other disadvantage elements.
Serial connection can't exceed the max. length, and IE3 must be used with aluminum profile and other radiators;
Cut LED strip according to the mark logo.

FL-IG2835 LED strip

FL-IG1-X
FL-IG2-X
FL-IG3-X

3pcs/reel 5

Features:

1. High efficiency and luminous strip;
2. Double layper pure copper 2oz PCB;
3. 3M VHB adhesive tape for easy installation (IG3 with 3M 300LSE tape);
4. high brightness 2835 type LED; 120 degree;
5. Standard 5M on reel for IG and IG2, 3M on reel for IG3;
6. IG3 series should work with aluminium profile.

Technical parameters:

Model Colour Lumen LED Type LED Qty. Width*Length DC Voltage Rated Watt CRI IP
FL-IG1-X White 710 (leds/m) (w/m) 20/64/
FL-IG2-X Neutral White 660 (mm) (V) 65/68
FL-IG3-X Warm White 620
White 1380 2835 30 8*5000 12/24 7.2 >80 20/64/
Neutral White 1250 65/68
Warm White 1230 2835 60 10*5000 12/24 14.4 >80
White 2760 20/64
Neutral White 2710 2835 120 10*3000 12/24 28.8 >80
Warm White 2390

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P1

FL-IG1D-X IP64 Slim PU glue potted
FL-IG2D-X
FL-IG3D-X IP65 Silicon sleeved
FL-IG1S-X
FL-IG2S-X IP65 PU glue potted
FL-IG1P-X
FL-IG2P-X IP68 Silicon extrusion and glued
FL-SF-IG1-X
FL-SF-IG2-X

Accessories Table odel

FL-C1-8/10 FL-C2-8/10 FL-C3/10 L-connector T-connector CON-1-8/10 CON-2-8/10 CON-3-8/10

M
FL-IG1-X
FL-IG2-X
FL-IG3-X

Note: If you want order UL version, the wire could be difference

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P2

Dimension & Circuit Drawings:
FL-IG1-X-12V

FL-IG1-X-24V
FL-IG2-X-12V
FL-IG2-X-24V
FL-IG3-X-12V
FL-IG3-X-24V

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P3

Connecting&Installation Diagram:

1.Connect red wire of LED strip to positive polarity of power supply,
and connect black wire to negative polarity;
2.If such strip is not required, the LED strip can be cut along scissor mark;

3.The cut strip can be connected with accessory connectors,
then connect to controller;

Packing instruction:

Packing box Anti-static bag LED strip+accessories

Installation requirement:16-12-30

1. The LED strip should be installed on the surface of flame retardant,and thickness of wood or material
exceed 2mm;

2. Please read the specification first,to make sure the service environment matches the condition in the
specification before using;

3. The LED strip and accessories can't be squeezed and folded;
4. PCB conductive parts can't be damaged when installation;
5. Installation must conform to electrical safety standard.The LED strip can only be installed by professionals;
6. Pay at tention to positive and negative polarities before installation,otherwise the LED strip may be damaged;
7. For security reasons, recommend parallel connection when installation.Ensure power supply transform

operating load with transformer;
8. Cut the LED strip along the logo mark;
9. IG3 series should work with aluminium profile;
10.Please prevent static electricity when installation.The product need anti-corrosion environment, such as,

avoiding damp , water drop or other adverse elements.

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P4

2835 Single Color High CRI LED Strip

FL-EP2835-X-12/24
FL-EP2835-X-95-12/24

5pcs/reel 5

Features:

1. 2835 assembled LEDs
2. CRI90/ CRI95
3. Can be cut short, to meet different length requirement
4. CE,RoHS,5 years warranty
5. Waterproof grade:IP20
6. Customized packing

Technical parameters:

Model Colour Lumen LED Type LED Qty. Beam angle DC Voltage Rated Watt CRI
FL-EP2835-X-12 W/WW/NW (w/m) >90/95
FL-EP2835-X-95-12 W/WW/NW (leds/m) (degree) (V) 7.2 >90/95
FL-EP2835-X-24 W/WW/NW 7.2 >90/95
FL-EP2835-X-95-24 W/WW/NW 518-595 2835 30 120 12 14.4 >90/95
FL-EP2835-X2-12 W/WW/NW 538-652 14.4 >90/95
FL-EP2835-X2-95-12 W/WW/NW 28.8 >90/95
FL-EP2835-X2-24 W/WW/NW 518-595 2835 30 120 24 28.8
FL-EP2835-X2-95-24 W/WW/NW 538-652
FL-EP2835-X3-12 W/WW/NW
FL-EP2835-X3-95-12 W/WW/NW 1036-1190 2835 60 120 12
FL-EP2835-X3-24 W/WW/NW 1076-1304 60 120 24
FL-EP2835-X3-95-24 W/WW/NW
1036-1154 2835
1076-1304

2072-2380 2835 120 120 12
2152-2608 120 120 24

2072-2380 2835
2152-2608

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P1

Dimension & Circuit Drawings:

12V 30LED 100 8

33.33

12V

12V 60LED 10

50
16.67

12V

24V 30LED 166.7 8
8
33.33

24V

24V 60LED 100 10

16.67

24V

12V 120LED 8.3 10

25

12V

24V 120LED 8.33 10

50

24V

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P2

Connecting&Installation Diagram:

Power + red 12V
- black

1. Connect red wire of strip to positive polarity of power supply,and connect black wire to negative polarity;
Cutting line

12V

2. If don't need that long strip,it can be cut short according to the scissors mark;

Power 12V

3. The cut strips can be connected via accessories connectors, then the strips are connected to power supply.

Packing instruction:

Packing box Anti-static bag LED strip+accessories

Installation requirement:

1. The LED strip and other accessories can be squeezed;
2. Transduction parts of PCB can't be damaged during installation;
3. Installation of LED strip must conform to electrical safety standards, and only professionals can

perform installation;
4. Ensure power supply load employ transformer;
5. When the LED strip is intalled on metal or conductor surface, the contact surface must be processed

with insulation;
6. Identify positive polarity and negative polarity before installation to avoid LED strip damage;
7. During installation,pay attention to preventing electrostatic;
8. The product need anti-corrosion environment, such as: avoid damp water drop or other adverse factor.

2017-5-4

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P3

FL-EP3528 LED Strip

FL-EP3528-X-12/24
FL-EP3528-X-95-12/24

5pcs/reel 5

Features:

1. 3528 assembled LEDs
2. CRI90/ CRI95
3. Can be cut short, to meet different length requirement
4. CE,RoHS,5 years warranty
5. Waterproof grade:IP20
6. Customized packing

Technical parameters:

Model Colour Lumen LED Type LED Qty. Beam angle DC Voltage Rated Watt CRI
FL-EP3528-X-12 W/WW/NW (w/m)
FL-EP3528-X-95-12 W/WW/NW (leds/m) (degree) (V)
FL-EP3528-X-24 W/WW/NW
FL-EP3528-X-95-24 W/WW/NW 454-511 3528 60 120 12 4.8 >90/95
FL-EP3528-X2-12 W/WW/NW 403-434
FL-EP3528-X2-95-12 W/WW/NW
FL-EP3528-X2-24 W/WW/NW 454-511 3528 60 120 24 4.8 >90/95
FL-EP3528-X2-95-24 W/WW/NW 403-434

908-1022 3528 120 120 12 9.6 >90/95
806-868

908-1022 3528 120 120 24 9.6 >90/95
806-868

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P1

Dimension & Circuit Drawings:
FL-EP3528-X-12

FL-EP3528-X-24
FL-EP3528-X2-12
FL-EP3528-X2-24

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P2

Connecting&Installation Diagram:

Power + red 12V
- black

1. Connect red wire of strip to positive polarity of power supply,and connect black wire to negative polarity;
Cutting line

12V

2. If don't need that long strip,it can be cut short according to the scissors mark;

Power 12V

3. The cut strips can be connected via accessories connectors, then the strips are connected to power supply.

Packing instruction:

Packing box Anti-static bag LED strip+accessories

Installation requirement:

1. The LED strip and other accessories can be squeezed;
2. Transduction parts of PCB can't be damaged during installation;
3. Installation of LED strip must conform to electrical safety standards, and only professionals can

perform installation;
4. Ensure power supply load employ transformer;
5. When the LED strip is intalled on metal or conductor surface, the contact surface must be processed

with insulation;
6. Identify positive polarity and negative polarity before installation to avoid LED strip damage;
7. During installation,pay attention to preventing electrostatic;
8. The product need anti-corrosion environment, such as: avoid damp water drop or other adverse factor.

2017-5-4

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P3

FL-EP5050 LED Strip

FL-EP5050-X-12/24
FL-EP5050-X-95-12/24

10pcs/reel 5

Features:

1. 5050 assembled LEDs
2. CRI90/ CRI95
3. Can be cut short, to meet different length requirement
4. CE,RoHS,5 years warranty
5. Waterproof grade:IP20
6. Customized packing
7. LEDs employ Epistar chip

Technical parameters:

Model Colour Lumen LED Type LED Qty. Beam angle DC Voltage Rated Watt CRI
FL-EP5050-X-12 W/WW/NW (w/m) >90/95
FL-EP5050-X-95-12 W/WW/NW (leds/m) (degree) (V) 7.2 >90/95
FL-EP5050-X-24 W/WW/NW 7.2 >90/95
FL-EP5050-X-95-24 W/WW/NW 610-636 5050 30 120 12 14.4 >90/95
FL-EP5050-X2-12 W/WW/NW 572-612 14.4
FL-EP5050-X2-95-12 W/WW/NW
FL-EP5050-X2-24 W/WW/NW 610-636 5050 30 120 24
FL-EP5050-X2-95-24 W/WW/NW 572-612

1220-1272 5050 60 120 12
1144-1224

1220-1272 5050 60 120 24
1144-1224

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P1

Dimension & Circuit Drawings:
FL-EP5050-X-12
FL-EP5050-X2-12
FL-EP5050-X-24
FL-EP5050-X2-24

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P2

Connecting&Installation Diagram:

Power + red 12V
- black

1. Connect red wire of strip to positive polarity of power supply,and connect black wire to negative polarity;
Cutting line

12V

2. If don't need that long strip,it can be cut short according to the scissors mark;

Power 12V

3. The cut strips can be connected via accessories connectors, then the strips are connected to power supply.

Packing instruction:

Packing box Anti-static bag LED strip+accessories

Installation requirement:

1. The LED strip and other accessories can be squeezed;
2. Transduction parts of PCB can't be damaged during installation;
3. Installation of LED strip must conform to electrical safety standards, and only professionals can

perform installation;
4. Ensure power supply load employ transformer;
5. When the LED strip is intalled on metal or conductor surface, the contact surface must be processed

with insulation;
6. Identify positive polarity and negative polarity before installation to avoid LED strip damage;
7. During installation,pay attention to preventing electrostatic;
8. The product need anti-corrosion environment, such as: avoid damp water drop or other adverse factor.

2017-5-4

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P3

Flexible chip-on-FPC strip

FL-SFL-512-24V

Available colors

2200K 2700K 3000K 4000K 5000K

5

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 02
[email protected]

Features

Hidden resistor, 512 flexible chips per meter, the longest length is up to 5 meters, neat appearance;
constant Voltage design, cuttable, can be cut every 62.5mm @24V DC.

R Hidden resistor

CHIP-ON-FPC x 512Pcs

24V 24V

1000mm

24V 24V 24V 24V 24V

62.5 mm/2.46" 62.5 mm/2.46"

Max. 5000 mm/196.85"

No dots light, high consistancy for light, efficient heat transfer;

No dots light

3M 3M 3M 3M 3M 3M 3M 3M 3M Glue

PCB
3M adhesive tape

One chip died, the section still working.

No bracket, no golder wire, better bendable,

24V 24V

Seamless butting of
two welding points

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 03
[email protected]

CRI>92, up to 100lm/W. FL-SFL-512-XX, CRI>92
Ordinary LED Strip, CRI=80

Technical Parameters

IP20 Data info (per meter) Note: Tolorance for date +- 10%

Model LED Type LED Qty. Rated Watt CRI PCB width Voltage Mini. cut Standard
(leds/m) (w/m) CCT Range Lumen packing

2200K 710lm

2700K 780lm

FL-SFL-512-XX COB 512 10w/m 3000K 910lm 92 8mm 24V 62.5mm 5m/Reel

4000K 989lm

5000K 1083lm

Dimensions (unit: mm/inch) 24V 24V 1.5mm/0.059"

FL-SFL-512-24V 8 mm/0.315"

62.5 mm/2.46"

24V 24V

5000 mm/196.85"

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 04
[email protected]
Wiring Diagram
Power

1. Connect the red wire of LED strip to posi ve polarity,and connect the black
wire to nega ve polarity;

Cutting line

2. The LED strip can be cut according to sissors
mark because of different requirements;

Power

3. weld the wires with iron to the cut-off strip and then connect power supply.

Packaging Information

LED strip Anti-static bag Packing box

Installation Requirement

The LED strip and accessories can't be squeezed or folded.
PCB conductive parts can't be damaged when installation.
Installation must conform to electrical safety standard. The LED strip can only be installed by professionals.
Ensure power supply transform operating load with transformer.
When install on metal or conductor surface, insulation protection need to be provided to the contact area.
Observe positive and negative polarity, ensure correct connection to avoid damaging LED strip.
When installation, please prevent static electricity.
The product need anti-corrosion environment, such as, avoiding damp, water drop or other adverse elements.
The product should work with aluminum profile.

2110 Hybrid Strip
FL-2110-YID2-12&24V

Available colors

W WW W+WW

5

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 02
[email protected]

Features

2110 assembled LEDs;
CRI90;
CE, RoHS, 5 years warranty;
Multiple color temperatures: pure white, warm white and natural white;
Delicate, high bright, highly reliable, rich in color, etc.;
The LED strip can be cut to meet requirements of different length;
Equipped with many LEDs which are placed densely, concentrated lighting effect and higher power. And effect will
be better if using together with aluminum bar.

Application

Stage lighting;
Festival, activities, exhibition lighting, etc;
Backlight of signage;
Contour lighting;
Landscape decoration lighting.

Technical Parameters

Model Color Lumen Color LED Type LED Qty. Beam angle Rated Wa DC Voltage IP CRI
FL-2110-YID2-12&24V 2110 (V) 20/64/65 90
(lm/m) temperature (leds/m) (degree) (w/m)
12/24
W 940 4750-6250K

WW 820 2600-3100K 336 120 23

W+WW 1700 3800-4500K

IP20 IP64 IP65

Non-waterproof Slim silicon potted Silicon sleeved Silicon po ed
FL-2110-YID2-XX FL-2110D-YID2-XX FL-2110S-YID2-XX FL-2110P-YID2-XX

336 Leds/m 1.4mm 2.8mm 4mm 4.3mm
0.06" 0.11" 0.16" 0.17"

8mm/0.31" 8mm/0.31" 11mm/0.43" 10mm/0.39"

Dimensions

FL-2110-YID2

17.9mm/0.705"

12V DC 12V DC 12V DC 12V DC 12V

WR R WR R WR R WR R 8mm/0.31"
WW WW WW WW

5m/16.4'

41.67mm/1.641"

24V DC 24V DC 24V

WR R WR R WR R WR R 8mm/0.31"
WW WW WW WW

5m/16.4'

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 03
[email protected]

Wiring Diagram

+24 VDC R1 R2 +24VDC R1 R2 +24 VDC R1 R2 +24 VDC R1

W W W W
L1 L2 L1 L2 L1 L2 L1 L2

WW WW WW WW

1. Connect red wire of LED strip to positive polarity,and connect
black wire to negative polarity;

Cutting line

+24 VDC R1 R2 +24VDC R1 R2 +24 VDC R1 R2 +24 VDC R1

W W W W
L1 L2 L1 L2 L1 L2 L1 L2

WW WW WW WW

2.The LED strip can be cut according to sissors
mark because of different requirements;

+24 VDC R1 R2 +24VDC R1 R2 +24 VDC R1 R2 +24 VDC R1

W W W W
L1 L2 L1 L2 L1 L2 L1 L2

WW WW WW WW

3.The cut LED strip can be connected to power supply via
accessories.

Packaging Information

LED strip+accessories Anti-static bag Packing box

Installation Requirement

The LED strip and accessories can't be squeezed or folded;
PCB conductive parts can't be damaged when installation;
Installation must conform to electrical safety standard. The LED strip can only be installed by professionals;
Ensure power supply transform operating load with transformer;
When install on metal or conductor surface, insulation protection need to be provided to the contact area;
Observe positive and negative polarity, ensure correct connection to avoid damaging LED strip;
When installation, please prevent static electricity;
The product needs anti-corrosion environment, such as, avoiding damp, water drop or other adverse elements.

FLEXEVER LED STRIP LIGHT

25 Meter No Voltage Drop Strip

Available colors

W NW WW SWW

5

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 02
[email protected]

Features

2835 assembled LEDs.
Built-in IC, constant current design. Standard constant voltage driver.
Maximum connection length is 25m.
The LED strip can be cut to meet requirements of different length.
CE, RoHS, 5 years warranty.
Different IP grades can meet the requirements in different environments.
No resistor, fancy apperance.

Application

Stage lighting;
Festival, activities, exhibition lighting, etc;
Backlight of signage;
Contour lighting;
LED luminous characters;
Landscape decoration lighting.

Technical parameters

Model Color Lumen LED LED Type LED Qty. Beam angle DC Voltage Rated Wa IP CRI
FL-2835CC-XX (lm/m) CCT Range ( leds /m) (degree ) (V) (w/m) 20/65/68 80
W
NW 390 W(6000-6500K) 2835 60 120 24 3.6
WW 380 NW(3800-4200K)
SWW 370 WW(2900-3100K)
360 SWW(2300-2500K)

FL-AT8-2835CC-XX IP65 all-covered single-sided 5mm
FL-SF-2835CC-XX silicon extrusion 0.2"

10mm/0.39"

FL-2835CC-XX

6mm
IP68 Silicon extrusion and glued 0.24"

12mm/0.47"

Dimensions 100mm/3.937"
25m/82'
FL-2835CC-XX-24V

DC 24V

8mm
0.315"

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 03
[email protected]
Wiring diagram

P ower

1. Connect red wire of LED strip to posi ve polarity,and connect
black wire to nega ve polarity;

cutting line

P ower 2.The LED strip can be cut according to sissors
mark because of different requirements;
Packaging information
3.The cut LED strip can be connected to power supply via
accessories.

LED strip+accessories Anti-static bag Packing box

Installation requirement

The LED strip and accessories can't be squeezed or folded.
PCB conductive parts can't be damaged when installation.
Installation must conform to electrical safety standard. The LED strip can only be installed by professionals.
Ensure power supply transform operating load with transformer.
When install on metal or conductor surface, insulation protection need to be provided to the contact area.
Observe positive and negative polarity, ensure correct connection to avoid damaging LED strip.
When installation, please prevent static electricity.
The product need anti-corrosion environment, such as, avoiding damp, water drop or other adverse elements.

3.5mm Ultra-slim High Bright 5
Flexible Strip

FL-ID35/IE35

Features:

1. 3020,3014 high bright LEDs;
2. 3.5mm ultra-narrow, suitable for different installtion;
3. Three options: 78 LEDs/m(3020 LED),

90 LEDs/m, 120 LEDs/m(3014LED);
4. Different single color, 12V DC, 3m/reel, IP20;
5. Each section can be cut;
6. TUV,CE,RoHS compliant.

Application:

Suitable for advertising display, backlight,
architecture decoration, indoor bar,
dance hall, wine cabinet,
floor, ceiling ,etc.

Technical parameters:

Model Width Max.Length Min.Length LED LED Qty. DC Voltage Max. Power Luminous Flux
FL-ID35-W (mm) (m) (mm) Type (w/m) (lm/m)
FL-ID35-NW 3020 (pcs/m) (V)
FL-ID35-WW 990
FL-IE35-90-W 3014
FL-IE35-90-NW 3.5 3 12.8 78 12 12.4 980
FL-IE35-90-WW 3014
FL-IE35-120-W 940
FL-IE35-120-NW
FL-IE35-120-WW 950

3.5 3 11.11 90 12 11.0 940

900

1200

3.5 3 8.3 120 12 14.4 1150

1100

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 [email protected] P1

Dimension (Unit:mm):

FL-ID35

FL-IE35-90

FL-IE35-120

Notice:

1.Install on flame-retardant surface with thickness >2mm;
2.Please read the specification carefully, make sure using environment conform to conditions in specification;
3.Please confirm input voltage before use, and disconnect power;
4.The serial connection length can't exceed 3 m;
5.Cut the strip according logo.

Finlight Group Oy Valtatie 10, 37800 Akaa +358 40 668 5048 2015-07-30

[email protected] P2