Nessco CFIS Product Catalogue 2014 WEB_reduced pages

HEX SHANK DRILLS

DRILL BITS - GOLD SERIES

Hex Shank Drill 1/4” (6.3MM) HEXAGONAL SHANK

1/4” TCT Countersink - Tungsten Carbide
Hex
CODE DRILL DIA DRILL DIA (IN) OAL (MM) FL (MM) STYLE MATERIAL PACK
(MM) 1/4” Hex Shank HSS QTY
78 30
9QRM024 2.4 3/32 81 33 1
89 38 1
9QRM030 3.0 - 90 38 1
94 46 1
9QRM032 3.2 1/8 95 44 1
109 56 1
9QRM035 3.5 - 104 55 1
116 61 1
9QRM036 3.6 9/64 113 56 1
123 68 1
9QRM040 4.0 5/32 1

9QRM048 4.8 3/16

9QRM050 5.0 -

9QRM056 5.6 7/32

9QRM060 6.0 15/64

9QRM0635 6.35 1/4

Alpha Drill Sets - Gold Series Metric Alpha Drill Sets - Gold Series Imperial

CODE SIZE RANGE (MM) STYLE MATERIAL NO OF BOX STYLE BOX CODE SIZE RANGE (MM) STYLE MATERIAL NO OF BOX STYLE BOX
DRILLS QTY DRILLS QTY
HSS
SM13 1.5 - 6.5 Titanium 13 Metal 30 SI13 1/16 - 1/4 13 Metal 30
SM19 1.0 - 10.0 Nitride SI21 1/16 - 3/8
SM19PB 1.0 - 10.0 19 Metal 20 SI21PB 1/16 - 3/8 21 Metal 20
SM25 1.0 - 13.0 Straight Cobalt SI29 1/16 - 1/2
Shank Plastic 19 Plastic 20 SI29PB Straight Shank 21 Plastic 20
SM25PB 1.0 - 13.0 Straight SI29R 1/16 - 1/2
Shank 25 Metal 8 SI29RPB Straight Shank HSS 29 Metal 8
SM25R 1.0 - 13.0 1/16 - 1/2 Titanium
Reduced Shank Jobber, 25 Plastic 7 SI29CO Reduced Shank Jobber, Nitride 29 Plastic 7
SM25RPB 1.0 - 13.0 135o 1/16 - 1/2 135o
Reduced Shank Split 25 Metal 8 SI21PBOX Reduced Shank Split Cobalt 29 Metal 8
SM25CO 1.0 - 13.0 Straight Point SI29PBOX 1/16 - 1/2 Point Plastic
Shank COBALT Empty 25 Plastic 7 Straight Shank Empty 29 Plastic 7
SM19PBOX 1.0 - 10.0 Empty Box COBALT Box
Box 25 Plastic 7 1/16 - 3/8 Empty 29 Plastic 7
SM25PBOX Box
1.0 - 13.0 Empty -8 1/16 - 1/2 Empty -8
Box Box Plastic
Plastic
-7 -7

PAGE www.nessco.com.au

494

STEP DRILLS

DRILL BITS - GOLD SERIES

Step Drills SELF-STARTING SPLIT POINT THREE FLATS ON SHAFT

Step Drill - Gold Series Supplied in individual sealed plastic tubes

CODE DIA (MM) NO OF STEPS DRILL DIA DRILL DIA MATERIAL PACK QTY
(MM) (IN) 1
9 steps 4-12 1
9STM4-12 4 - 12 9 steps 4-20 - 1
9STM4-20 4 - 20 13 steps 6-30 1
9STM6-30 6 - 30 9 steps - - HSS Titanium Nitride
9STI14-34 1/4 - 3/4 - PACK QTY

1/4 - 3/4 1

Step Drill - Gold Series Set

CODE DRILL DIA (MM) DESCRIPTION
3 Piece Set Supplied in Robust Metal Case
STPSET3 • 4 - 12
• 4 - 20
• 6 - 30

Step Drills - Gold Series Spiral Flute Supplied in individual sealed plastic tubes

CODE DIA (MM) NO OF STEPS DRILL DIA DRILL DIA MATERIAL PACK QTY
(MM) (IN) 1
4 - 12 1
9STMF4-12 4 - 12 9 steps 4 - 20 - 1
9STMF4-20 4 - 20 9 steps 6 - 30 1
9STMF6-30 6 - 30 13 steps 6 - 36 - HSS Titanium Nitride
9STIF14-34 6 - 36 13 steps - PACK QTY

- 1

Step Drills - Gold Series Spiral Flute Set

CODE DRILL DIA (MM) DESCRIPTION

STPSETSF-3 • 4 - 12 3 Piece Set Supplied in Robust Metal Case
• 4 - 20
• 6 - 30

Features SPLIT POINT
EDGE BACKER
Step Drills DEBURRS BACK END
OF HOLE
• The contour of the ROTASTOP tool bit VARIABLE
ensures improved transmission of the SPIRAL FLUTE
torque. LASER EDGED
HOLE Ø
• ROTASTOP practically chucks itself
automatically by means of the rising LASER EDGED
contours. SPEED Ø
ROTASTOP
• The result: no slipping in the chuck and NON-SLIP SHAFT
precise results when machining metals.

• ROTASTOP allows easy tool changing and
longer service life for the tools

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

495

SPEARPOINT & SPOT WELD DRILLS

DRILL BITS - GOLD SERIES

Spearpoint Drill FOR DRILLING GLASS & TILES -
Glass & Tile IDEALLY USED AT LOW SPEED WITH WATER
Spot Weld Drills
Spearpoint Drill Bits - made in Germany Supplied in individual hang pack

CODE DRILL DIA DRILL DIA OAL (MM) DESCRIPTION MATERIAL PACK
(IN) (MM) QTY

9GT030G 1/8 3 65 3mm Glass Tile Drill 1
4mm Glass Tile Drill 1
9GT040G 5/32 4 65 5mm Glass Tile Drill 1
6mm Glass Tile Drill 1
9GT050G 3/16 5 65 6.5mm Glass Tile Drill 1
8mm Glass Tile Drill 1
9GT060G 15/64 6 65 10mm Glass Tile Drill Tungsten Carbide 1
12mm Glass Tile Drill 1
9GT065G 1/4 6.5 65

9GT080G 5/16 8 70

9GT100G 3/8 10 80

9GT120G 1/2 12 80

Spearpoint Drill Bits Supplied in individual hang pack

CODE DRILL DIA DRILL DIA OAL (MM) DESCRIPTION MATERIAL PACK
(IN) (MM) QTY
3
GT030 1/8 4 57 3mm Glass Tile Drill 1
5 1
9GT040 5/32 6 62 4mm Glass Tile Drill 1
6.5 1
9GT050 3/16 8 69 5mm Glass Tile Drill 1
10 1
9GT060 15/64 12 74 6mm Glass Tile Drill Tungsten Carbide 1
1
9GT065 1/4 76 6.5mm Glass Tile Drill

9GT080 5/16 82 8mm Glass Tile Drill

9GT100 3/8 89 10mm Glass Tile Drill

9GT120 1/2 96 12mm Glass Tile Drill

FOR DRILLING OUT SPOT WELDED PANELS

Spot Weld Drill Bits - Cobalt Supplied in plastic hang tubes

CODE DRILL DIA OAL (MM) FL (MM) COATING MATERIAL PACK
(MM) HSS Cobalt QTY
30
9S65 6.5 46 17 30
18 Cobalt 35
9S80 8 46 18

9L80 8 76

Spot Weld Drill Bits - Titanium Nitride Supplied in plastic hang tubes
COATING
CODE DRILL DIA OAL (MM) FL (MM) MATERIAL PACK
(MM) 18 QTY
18 30
9S80T 8 46 Titanium Nitride Coating HSS Cobalt - Titanium
Nitride Coated 35
9L80T 8 76

Spot Weld Drill Bits - Dura Coating Supplied in plastic hang tubes

CODE DRILL DIA OAL (MM) FL (MM) COATING MATERIAL PACK
(MM) QTY
30
9S80DUR 8 46 18 Dura Coating HSS Cobalt & Dura 35
18 Coating
9L80DUR 8 76

PAGE www.nessco.com.au

496

DIAMOND CORE DRILLS
DRILL BITS - GOLD SERIES

Diamond Core FOR DRILLING HARDENED TILES AND NATURAL STONE
Drills I.E. PORCELAIN, MARBLE, HARDENED CERAMIC

Diamond Core Drill

CODE DRILL DIA STYLE DESCRIPTION MATERIAL PACK
(MM) Welded Diamond Grit QTY
Core Drill 5mm Diamond Core Drill w/ Reservoir
9GTD050 5 Core Drill 6mm Diamond Core Drill w/ Reservoir 1
Core Drill 7mm Diamond Core Drill w/ Reservoir 1
9GTD060 6 Core Drill 8mm Diamond Core Drill w/ Reservoir 1
Core Drill 10mm Diamond Core Drill w/ Reservoir 1
9GTD070 7 Core Drill 12mm Diamond Core Drill w/ Reservoir 1
Core Drill 15mm Diamond Core Drill w/ Reservoir 1
9GTD080 8 Core Drill 20mm Diamond Core Drill w/ Reservoir 1
Core Drill 25mm Diamond Core Drill w/ Reservoir 1
9GTD100 10 Core Drill 1
35mm Diamond Core Drill 1
9GTD120 12

9GTD150 15

9GTD200 20

9GTD250 25

9GTD350 35

Diamond Core Drill Sets

CODE DRILL DIA STYLE DESCRIPTION MATERIAL PACK
(MM) Welded Diamond Grit QTY
5 pce Diamond Core Drill Set
SGTD5-10 5 - 10 Core Drill 5 - 10mm w/ Reservoir 1

SGTD10-25 10 - 25 Core Drill 5 pce Diamond Core Drill Set 1
10 - 25mm w/ Reservoir

FOR BEST RESULTS POUR A SMALL
AMOUNT OF WATER ON THE SURFACE
BEFORE DRILLING.
1 2
USE A HIGH SPEED DRILL, 800 - 2000 RPM, Mark the wall and place the drill head
LIGHT PRESSURE. at an angle to the wall as shown. Start the drill and raise the drill as you cut the top
surface to 90º angle to the wall. Drill as normal.

Drill Guide & Water Cooling System

1 2 3 4 5 6

Select the guide hole Fill the reservoir with Wipe the surface of Get ready to drill. Place drill into the guide Move the reservoir
you require. Move the water to the maximum the tiles with damp Move the reservoir to and drill as required. back to the closed
water reservoir to the level on the front . cloth. Line-up the the open position. position. Finished.
closed postion over guide hole with mark
the hole selected. on the wall and stick.

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

497

MASONRY DRILLING
RANGE

ALPHA MASONRY PRO DRILLS 499
ALPHA MASONRY DRILLS 500
ALPHA UNI DRE DRILLS 501
ALPHA SDS DRILLS 502
ALPHA HOLLOW CORE DRILLS 509
ALPHA SDS-MAX CORE CUTTER 510
ALPHA SDS CHISELS & ADAPTOR 511
HITACHI SDS DRILLS 512
HITACHI DEMOLITION BITS 516

498

MASONRY PRO DRILLS

DRILL BITS - MASONRY DRILLING RANGE

Masonry Pro PROFESSIONAL QUALITY, SUITABLE FOR ROTARY &
Drill Bits IMPACT DRILLING

(08) 9333 4999 Masonry Pro Drill Bits Supplied in retail hang pack

CODE DRILL DIA OAL (MM) FL (MM) STYLE MATERIAL PACK
(MM) Straight Shank Masonry QTY
70 40
MA030070G 3 70 40 1
80 45
MA030070G10 3 85 50 10
85 50
MA035080G 3.5 150 90 1
85 50
MA040085G 4 150 90 1
100 60
MA050085G 5 150 90 1
100 60
MA050150G 5 150 90 1
150 90
MA055085G 5.5 120 80 1
200 150
MA055150G 5.5 120 80 1
120 80
MA060100G 6 200 150 1
150 90
MA060150G 6 400 350 1
150 90
MA065100G 6.5 150 90 1
400 350
MA065150G 6.5 160 100 1
400 350
MA070150G 7 160 100 1
160 100
MA080120G 8 Carbide Tip 1

MA080200G 8 1

MA090120G 9 1

MA100120G 10 1

MA100200G 10 1

MA120150G 12 1

MA120400G 12 1

MA130150G 13 1

MA140150G 14 1

MA140400G 14 1

MA160160G 16 1

MA160400G 16 1

MA180160G 18 1

MA200160G 20 1

[email protected] (03) 9706 8400 [email protected] PAGE

499

MASONRY DRILLS

DRILL BITS - MASONRY DRILLING RANGE

Masonry Drill Bits PROFESSIONAL QUALITY, SUITABLE FOR ROTARY &
IMPACT DRILLING

Masonry Drill Bits Supplied in retail hang pack

CODE DRILL DIA OAL (MM) FL (MM) STYLE MATERIAL PACK
(MM) 65 32 Straight Shank Masonry QTY
75 37
MA030065 3 75 37 Carbide Tip 1
MA035075 3.5 65 37 1
MA040075 4 150 100 1
MA045065 4.5 85 45 1
MA045150 4.5 150 90 1
MA050085 5 85 45 1
MA050150 5 150 90 1
MA055085 5.5 100 55 1
MA055150 5.5 150 90 1
MA060100 6 100 55 1
MA060150 6 150 90 1
MA065100 6.5 300 200 1
MA065150 6.5 100 55 1
MA065300 6.5 120 70 1
MA070100 7 150 90 1
MA080120 8 300 200 1
MA080150 8 120 70 1
MA080300 8 150 90 1
MA100120 10 400 267 1
MA100150 10 150 90 1
MA100400 10 150 90 1
MA110150 11 400 267 1
MA120150 12 150 90 1
MA120400 12 210 150 1
MA130150 13 150 90 1
MA140210 14 400 267 1
MA160150 16 1
MA160400 16 1

Masonry Drill Bits IDEAL FOR DRILLING AND COUNTER-SINKING FIBRE CEMENT &
COMPRESSED FIBRE CEMENT SHEETING
1
Masonry Drill Bits - Shallow Cut Supplied carded
MATERIAL
CODE DRILL DIA DEPTH (MM) STYLE Carbide Tip PACK
(MM) Countersunk Depth Gauge QTY
Supplied carded
MADG0509 59 STYLE MATERIAL 1
Countersunk Depth Gauge Carbide Tip 1
MADG0609 69
PACK
Masonry Drill Bits - Deep Cut QTY

CODE DRILL DIA DEPTH (MM) 1
(MM) 1

MADG0518 5 18

MADG0618 6 18

23

PAGE www.nessco.com.au

500

UNI DRE DRILLS

DRILL BITS - MASONRY DRILLING RANGE

Uni Dre Masonry FOR DRILLING WOOD, METAL, PLASTIC, BRICK, TILES, CERAMICS,
PLASTERBOARD & AERATED CONCRETES

Masonry Drill Bit - Straight Shank Supplied in retail hang pack

CODE DRILL DIA OAL (MM) FL (MM) STYLE MATERIAL PACK
(MM) Multi-purpose Straight Shank QTY

UNI030070 3.0 70 40 26

UNI040085 4.0 85 50 26

UNI050085 5.0 85 50 26

UNI060100 6.0 100 60 Sharpened Carbide Tip 26
26
UNI065100 6.5 100 60

UNI080120 8.0 120 80 26

UNI100120 10.0 120 80 26

UNI120150 12.0 150 90 26

Uni Dre Masonry FOR DRILLING WOOD, METAL, PLASTIC, BRICK, TILES, CERAMICS,
Hex Shank PLASTERBOARD AND AERATED CONCRETE, FITS 1/4” BIT HOLDER

Masonry Drill Bit - Hex Shank Supplied in retail hang pack

CODE DRILL DIA OAL (MM) FL (MM) STYLE MATERIAL PACK
(MM) Multi-purpose Hex Shank QTY

UNIHEX30 3.0 95 40 STYLE 26
Multi-purpose Hex Shank
UNIHEX40 4.0 105 50 26

UNIHEX50 5.0 105 50 Sharpened Carbide Tip 26
26
UNIHEX60 6.0 115 60

UNIHEX65 6.5 115 60 26

UNIHEX80 8.0 135 80 26

Masonry Drill Bit - Hex Shank Supplied in retail hang pack

CODE DESCRIPTION MATERIAL PACK
QTY

UNIHEXSET 5 Piece UniDre 1/4 Hex Sharpened Carbide Tip 1
Masonry Drill Set
3, 5, 6, 6.5, 8mm

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

501

SDS DRILLS

DRILL BITS - MASONRY DRILLING RANGE

SDS Plus Drill Bits CENTERING CHISEL HEAD WITH MULTI-FLUTE SPIRAL FOR
MAXIMUM DRILLING CAPACITY

SDS SDS Plus Drill Bits DIA (MM) OAL (MM) FL (MM) Supplied carded BOX QTY
plus CODE 4 110 50 MATERIAL 25
4 160 100 25
Easy centring Dynamic, SP040110G 5 110 50 Carbide Tip 25
spot drilling chisel-shaped SP040160G 5 160 100 25
head design SP050110G 5 210 150 25
SP050160G 5.5 110 50 25
Cross-section of Standard SP050210G 5.5 160 100 25
Alpha SDS Flute competition SP055110G 5.5 210 150 25
cross-section SP055160G 5.5 310 250 20
SP055210G 6 110 50 25
SP055310G 6 160 100 25
SP060110G 6 210 150 25
SP060160G 6 310 250 20
SP060210G 6 460 400 25
SP060310G 6.5 110 50 25
SP060460G 6.5 160 100 25
SP065110G 6.5 210 150 25
SP065160G 6.5 260 200 25
SP065210G 6.5 310 250 25
SP065260G 7 160 100 25
SP065310G 7 250 200 25
SP070160G 7 450 400 20
SP070250G 8 110 50 25
SP070450G 8 160 100 25
SP080110G 8 210 150 25
SP080160G 8 260 200 25
SP080210G
SP080260G

PAGE www.nessco.com.au

502

SDS DRILLS

DRILL BITS - MASONRY DRILLING RANGE

SDS Plus Drill Bits CENTERING CHISEL HEAD WITH MULTI-FLUTE SPIRAL FOR
MAXIMUM DRILLING CAPACITY

SDS SDS Plus Drill Bits DIA (MM) OAL (MM) FL (MM) Supplied carded BOX QTY
plus CODE 8 310 250 MATERIAL 20
8 460 400 20
Easy centring Dynamic, SP080310G 8 600 550 Carbide Tip 20
spot drilling chisel-shaped SP080460G 9 210 150 25
head design SP080600G 10 110 50 25
SP090210G 10 160 100 25
Cross-section of Standard SP100110G 10 210 150 25
Alpha SDS Flute competition SP100160G 10 260 200 25
cross-section SP100210G 10 350 300 25
SP100260G 10 450 400 20
SP100350G 10 600 550 20
SP100450G 10 1000 950 20
SP100600G 11 260 200 20
SP1001000G 12 160 100 20
SP110260G 12 210 150 20
SP120160G 12 260 200 1
SP120210G 12 360 300 1
SP120260G 12 450 400 1
SP120360G 12 600 550 1
SP120450G 12 1000 950 1
SP120600G 13 160 100 1
SP1201000G 13 210 150 1
SP130160G 13 310 250 1
SP130210G 13 450 400 1
SP130310G 14 260 200 1
SP130450G 14 450 400 1
SP140260G 14 600 550 1
SP140450G 14 1000 950 1
SP140600G 15 260 200 1
SP1401000G 15 450 400 1
SP150260G 16 160 100 1
SP150450G 16 210 150 1
SP160160G 16 260 200 1
SP160210G 16 310 250 1
SP160260G 16 450 400 1
SP160310G 16 600 550 1
SP160450G 16 800 750 1
SP160600G 18 200 150 1
SP160800G 18 300 250 1
SP180200G 18 450 400 1
SP180300G 18 600 550 1
SP180450G 20 200 150 1
SP180600G 20 300 250 1
SP200200G 20 450 400 1
SP200300G 20 600 550 1
SP200450G 22 250 200 1
SP200600G 22 450 400 1
SP220250G 22 600 550 1
SP220450G 23 450 400 1
SP220600G 24 250 200 1
SP230450G 24 450 400 1
SP240250G 25 250 200 1
SP240450G 25 450 400 1
SP250250G 25 600 550 1
SP250450G 26 250 200 1
SP250600G 26 450 400 1
SP260250G
SP260450G

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

503

SDS DRILLS

DRILL BITS - MASONRY DRILLING RANGE

SDS Plus Drill Bits CENTERING CHISEL HEAD WITH MULTI-FLUTE SPIRAL FOR
MAXIMUM DRILLING CAPACITY

SDS Plus Drill Bits - Bulk 10 packs

CODE DIA (MM) OAL (MM) FL (MM) MATERIAL PACK QTY
110 50 Carbide Tip 10
SP050110G-10 5 160 100 10
110 50 10
SP050160G-10 5 160 100 10
110 50 10
SP055110G-10 5.5 160 100 10
110 50 10
SP055160G-10 5.5 160 100 10
160 100 10
SP060110G-10 6 160 100 10
210 150 10
SP060160G-10 6 160 100 10
210 150 10
SP065110G-10 6.5 260 200 10
160 100 10
SP065160G-10 6.5

SP080160G-10 8

SP100160G-10 10

SP100210G-10 10

SP120160G-10 12

SP120210G-10 12

SP140260G-10 14

SP160160G-10 16

SDS Plus Drill Bit Sets Supplied in retail hang pack
MATERIAL
CODE DESCRIPTION PACK QTY
1
SPSET5 5 Piece SDS Plus Masonry Drill Set x 160mm
5, 6, 6.5, 8, 10mm

SPSET5-D 5 Piece SDS Plus Masonry Drill Set x 160mm Carbide Tip 1
5, 6.5, 8, 10, 12mm

SPSET7 7 Piece SDS Plus Masonry Drill Set x 160mm 1
5, 5.5, 6, 6.5, 8, 10, 12mm

PAGE www.nessco.com.au

504

SDS DRILLS

DRILL BITS - MASONRY DRILLING RANGE

SDS XR3 Drill Bits CENTERING CHISEL HEAD WITH MULTI-FLUTE SPIRAL FOR
MAXIMUM DRILLING CAPACITY

SDS XR3 Drill Bits

CODE DIA (MM) OAL (MM) FL (MM) MATERIAL BOX QTY
Carbide Tip 25
SR050110G 5 110 50 25
25
SDS SR050160G 5 160 100 25
plus 25
SR055110G 5.5 110 50 25
25
SR055160G 5.5 160 100 25
25
Easy centring Dynamic, SR060110G 6 110 50 25
spot drilling chisel-shaped 25
head design SR060160G 6 160 100 25
25
SR060210G 6 210 150 25
25
SR065110G 6.5 110 50 20
20
SR065160G 6.5 160 100 20
10
SR065210G 6.5 210 150 10
10
Cross-section of Standard SR080110G 8 110 50 10
Alpha SDS Flute competition 10
cross-section SR080160G 8 160 100

SR080210G 8 210 150

SR100160G 10 160 100

SR100210G 10 210 150

SR120160G 12 160 100

SR120210G 12 210 150

SR140260G 14 260 200

SR160310G 16 310 250

SR180310G 18 310 250

SR200310G 20 310 250

SR220450G 22 450 400

SR260450G 26 450 400

Ramset and R3 are trademarks of ITW Corporation and have no connection with Alpha

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

505

SDS DRILLS

DRILL BITS - MASONRY DRILLING RANGE

SDS Plus Zentro DYNAMIC DRILLING ABILITY WITH SECONDARY
4-Cutter Drill Bits CUTTERS PROTECTING THE DRILL BIT IN THE EVENT OF
REINFORCEMENT COLLISION
SDS
plus SDS Plus Zentro 4-Cutter Drill Bits
Dynamic drilling ability with
secondary cutters protecting CODE DIA (MM) OAL (MM) FL (MM) MATERIAL BOX QTY
the drill bit in the event of 50 Carbide Tip x4 25
reinforcement collision SPZ050110 5 110 100 25
50 25
SPZ050160 5 160 100 25
50 25
SPZ055110 5.5 110 100 25
150 25
SPZ055160 5.5 160 100 25
150 25
SPZ060110 6 110 100 25
150 25
SPZ060160 6 160 100 25
150 25
SPZ060210 6 210 100 20
150 20
SPZ065160 6.5 160 250 20
200 20
SPZ065210 6.5 210 200 1
400 1
SPZ080160 8 160 200 1
400 1
SPZ080210 8 210 200 1
400 1
SPZ100160 10 160 200 1
400 1
SPZ100210 10 210 200 1
400 1
SPZ120160 12 160 200 1
400 1
SPZ120210 12 210 200 1
400 1
SPZ120310 12 310 200 1
400 1
SPZ140260 14 260 400 1

SPZ160250 16 250

SPZ160450 16 450

SPZ180250 18 250

SPZ180450 18 450

SPZ200250 20 250

SPZ200450 20 450

SPZ220250 22 250

SPZ220450 22 450

SPZ240250 24 250

SPZ240450 24 450

SPZ250250 25 250

SPZ250450 25 450

SPZ280250 28 250

SPZ280450 28 450

SPZ300250 30 250

SPZ300450 30 450

SPZ320450 32 450

PAGE www.nessco.com.au

506

SDS DRILLS

DRILL BITS - MASONRY DRILLING RANGE

SDS Max Zentro MAXIMUM PERFORMANCE, GERMAN QUALITY AND DESIGN,
4-Cutter Drill Bits SECONDARY CUTTERS PROTECT THE DRILL BIT IN THE EVENT
OF REINFORCEMENT COLLISION, MAXIMUM ENERGY TRANSFER,
EXCELLENT PERFORMANCE AND LONG LIFE SDS MAX.

SDS Max Zentro 4-Cutter Drill Bits

CODE DIA (MM) OAL (MM) FL (MM) MATERIAL BOX QTY
Carbide Tip x4 1
SX12340 *12 340 200 1
1
SDS SX12540 *12 540 400 1
max 1
SX14340 *14 340 200 1
Maximum performance, German quality and design. 1
Secondary cutters protect the drill bit in the event of SX14540 *14 540 400 1
reinforcement collision. Maximum energy transfer, Long 1
Life SDS MAX. SX14920 *14 920 800 1
1
SXZ16340 16 340 200 1
1
SXZ16540 16 540 400 1
1
SXZ16920 16 920 800 1
1
SXZ18340 18 340 200 1
1
SXZ18540 18 540 400 1
1
SXZ18920 18 920 800 1
1
SXZ20320 20 320 200 1
1
SXZ20520 20 520 400 1
1
SXZ20920 20 920 800 1
1
SXZ22320 22 320 200 1
1
SXZ22520 22 520 400 1
1
SXZ22920 22 920 800 1
1
SXZ24320 24 320 200 1
1
SXZ24520 24 520 400 1
1
SXZ25320 25 320 200 1
1
SXZ25520 25 520 400 1

SXZ25920 25 920 800

SXZ26520 26 520 400

SXZ28370 28 370 250

SXZ28570 28 570 450

SXZ28920 28 920 800

SXZ30370 30 370 250

SXZ30570 30 570 450

SXZ32370 32 370 250

SXZ32570 32 570 450

SXZ32920 32 920 800

SXZ35570 35 570 450

SXZ35920 35 920 800

SXZ37570 37 570 450

SXZ38370 38 370 250

SXZ38570 38 570 450

SXZ40370 40 370 250

SXZ40570 40 570 450

SXZ40920 40 920 800

SXZ45570 45 570 450

SXZ50570 50 570 450

SXZ52570 52 570 450

* the 12-14mm diameter drills are manufactured as 2-cutters

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

507

SDS DRILLS

DRILL BITS - MASONRY DRILLING RANGE

SDS Max Hex Shank 13MM HEX SHANK ZENTRO 4-CUTTER
13mm Drill Bits
Hex Shank Drill Bits - 13mm Zentro 4-Cutter
13mm
CODE DIA (MM) OAL (MM) FL (MM) MATERIAL BOX QTY
Features 130 Carbide Tip x4 1
MHZ16280 16 280 130 1
250 1
MHZ18280 18 280 130 1
250 1
MHZ18400 18 400 130 1
250 1
MHZ20280 20 280 250 1

MHZ20400 20 400

MHZ22280 22 280

MHZ22400 22 400

MHZ25400 25 400

The one-piece, solid carbide tip and patented reinforcing Thanks to optimum 4 x 90° symmentry, all four carbide Laterial support and maximum possible area of
chamfering ensures low vibration and optimum drilling cutting edges function evenly and do not seize up on the interface between the carbide and steel body
performance when drilling into reinforcing steel. hitting reinforcing steel. compensate for torsional forces.

Centring tip for straight forward spot drilling with Four symmetrically functioning spiral ridges ensure low, Optimised flute core strength ensures low vibration
pinpoint accuracy. uniform flute wear. drilling performance and exceptional fracture resistance.

The high-volume flute geometry ensures the optimum Four cutter heads prevent seizing when drilling through Penetrates through steel deck plate eg Bondek® and
removal of drilling dust. reinforcing steel. concrete in one easy process.

PAGE www.nessco.com.au

508

HOLLOW CORE DRILLS

DRILL BITS - MASONRY DRILLING RANGE

Hollow Core FOR USE IN CONCRETE, MASONRY AND NATURAL STONE
Drill Bits
Hollow Core Bits
SDS
plus CODE CORE DIA (MM) OAL (MM) DESCRIPTION MATERIAL BOX QTY
58 30mm Hollow Core Bit Carbide Tip 1
SDS HCB30X58 30 58 40mm Hollow Core Bit 1
plus 58 45mm Hollow Core Bit 1
HCB40X58 40 58 50mm Hollow Core Bit 1
SDS 50 65mm Hollow Core Bit 1
plus HCB45X58 45 50 80mm Hollow Core Bit 1
50 90mm Hollow Core Bit 1
HCB50X58 50 50 100mm Hollow Core Bit 1
50 110mm Hollow Core Bit 1
HCB65X50 65

HCB80X50 80

HCB90X50 90

HCB100X50 100

HCB110X50 110

SDS Plus Shank Adaptors

CODE CORE DIA (MM) OAL (MM) DESCRIPTION MATERIAL BOX QTY
105 SDS Plus Shank Adaptor x 105mm Carbide 1
SPADP105 - 220 SDS Plus Shank Adaptor x 220mm 1
370 SDS Plus Shank Adaptor x 370mm 1
SPADP220 -

SPADP370 -

Centering Pilot Drill for Hollow Core Drills

CODE CORE DIA (MM) OAL (MM) DESCRIPTION MATERIAL BOX QTY
Centring Pilot Drill 8mm x 120mm Carbide Tip 1
SPDRILL8120 8 120

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

509

SDS-MAX CORE CUTTER

DRILL BITS - MASONRY DRILLING RANGE

SDS-Max Core FOR USE IN CONCRETE, MASONRY AND NATURAL STONE
Cutter
Concrete Core Cutter - SDS-Max Shank
SDS
plus CODE CORE DIA (MM) OAL (MM) DESCRIPTION MATERIAL BOX QTY
One piece tunnel drill Carbide Tip 1
CCC40X310 40 310 1
1
CCC40X550 40 550 1
1
CCC45X310 45 310 1
1
CCC45X550 45 550 1
1
CCC55X310 55 310 1

CCC55X550 55 550

CCC65X310 65 310

CCC65X550 65 550

CCC80X310 80 310

CCC80X550 80 550

SDS-Max Core Cutter

The Alpha Concrete Core Cutter is the modern tool for professionals. The one
piece core cutter has been specifically developed for the latest generation of
powerful rotary hammers and guarantees efficient drilling and superior life.

Features

UNIQUE HEAD DESIGN 200% BETTER
PRESENTS NUMEROUS PERFORMANCE
ADVANTAGES!
ACCURATE SPOT DRILLING +81%
FAST PENETRATION RATE THANKS TO
CHISEL-SHAPED CARBIDE TEETH +33%
ADDITIONAL RAKER TEETH TO HOLLOW
OUT THE ENTIRE CORE DIAMETER, 100%
NO CHISELLING OUT NECESSARY
HIGH VOLUME FLUTES FOR FAST 0 HAMMER CORE
REMOVAL OF DUST AND DEBRIS ROTARY HAMMER
LONG LIFE EXPECTANCY
LOW WEIGHT, REDUCED VIBRATION DRILL BIT
ONE-PIECE DESIGN TRANSFERS ALPHA CONCRETE
HAMMER ENERGY TO TOOL
WITHOUT DAMPING LOSSES CORE CUTTER
STRAIGHT, CIRCULAR HOLES
WITH FLAT BASE
SIGNIFICANTLY IMPROVED
PERFORMANCE WHEN
DRILLING STEEL
REINFORCEMENT

PAGE www.nessco.com.au

510

SDS CHISELS & ADAPTOR
DRILL BITS - MASONRY DRILLING RANGE

SDS Chisels ALPHA SDS MAX & SDS PLUS FITMENTS ARE AVAILABLE

SDS Chisels SDS WIDTH (MM) LENGTH (MM) DESCRIPTION PACK QTY
CODE PLUS - 250 SDS Plus Pointed Chisel 50
PLUS 20 250 SDS Plus Flat Chisel 50
SPPC250 PLUS 40 250 SDS Plus Spade Chisel 20
SPFC20250 PLUS 22 250 SDS Plus Hollow Chisel 10
SPSC40250 MAX - 280 SDS Max Pointed Chisel 25
SPHOL250 MAX 25 280 SDS Max Flat Chisel 30
SXPC280 MAX 50 400 SDS Max Spade Chisel 15
SXFC25280 MAX 26 300 SDS Max Hollow Chisel 10
SXSC50400
SXHOL300 PACK QTY
1
SDS-Max to GET THE MAXIMUM OUT OF YOUR ROTARY HAMMER
SDS-Plus Adaptor WITH THE ALPHA SDS-MAX TO SDS-PLUS ADAPTER

SDS SDS SDS-Max Adaptor SDS OAL (MM) MATERIAL
max plus CODE Max 400 SDS Max to SDS Plus Adaptor

SX-SPADP

DREConnect MAKE YOUR ROTARY HAMMER MUCH MORE VERSATILE.
Adaptor System NOW THE FULL RANGE OF SDS-MAX ACCESSORIES CAN FIT
ALMOST ANY ROTARY HAMMER ON THE MARKET
Features
DREConnect Adaptor System
(08) 9333 4999
CODE DIA (MM) OAL (MM) MATERIAL PACK QTY
190 DreConnect Adapter 30 x 190mm 1
SXSXCON 30
OAL (MM) MATERIAL PACK QTY
DREConnect Extension 320 SDS Max to SDS MAX Extension 1

CODE SDS

EXSXSX320 -

SDS MAX SDS MAX EXSXSX320
FITS HERE SDS TOP EXSTSX320
SDS PLUS EXSPSX320
EXTENSION SDS SPLINE EXSPSLSX320
BAR FITS HERE 13MM HEX EXH13SX320
19MM HEX EXH19SX320
19MM HEX EXH19WSX320

[email protected] (03) 9706 8400 [email protected] PAGE

511

SDS DRILLS

DRILL BITS - MASONRY DRILLING RANGE

SDS Plus Drill Bits

SDS Plus 2-Cutter Drill Bits

CODE DIA (MM) OAL (MM) FL (MM) MATERIAL
750100 4 110 50 Carbide Tip
751701 4 160 100
110 50
750101 5 140 80
160 100
751702 5 210 150
750102 5 310 250
751703 5 110 50
751704 5 160 100
210 150
750103 5.5 260 200
110 50
750104 5.5 160 100
751705 5.5 210 150
751706 5.5 260 200
750105 6 310 250
460 400
750106 6 110 50
160 100
751707 6 210 150
751708 6 260 200
751709 6 310 250
751710 6 460 400
110 50
750107 6.5 160 100
210 150
750108 6.5 110 50
751711 6.5 160 100
751712 6.5 210 150
751713 6.5 260 200
310 250
751714 6.5 410 350
460 400
750109 7 600 550
750110 7 1000 950
751715 7 160 100
750111 8 160 100
210 150
750112 8 160 100
110 50
750113 8 160 100
750114 8 210 150
750115 8 260 200
751716 8 310 250
350 300
750161 8 450 400
600 550
751717 8 800 750
750177 8 1000 950
750116 8.5 160 100
210 150
750160 9 260 200
310 250
750117 9 160 100
210 150
751718 9.5 260 200
750118 10
750119 10

750120 10

750121 10

750122 10
751719 10
750123 10

750168 10

751720 10

750169 10
750124 11
751721 11

750125 11

751722 11

750126 12
750127 12
750128 12

PAGE www.nessco.com.au

512

SDS DRILLS

DRILL BITS - MASONRY DRILLING RANGE

SDS Plus Drill Bits

SDS Plus 2-Cutter Drill Bits

CODE DIA (MM) OAL (MM) FL (MM) MATERIAL
310 250 Carbide Tip
750129 12 360 300
751723 12 450 400
750130 12 600 550
1000 950
750162 12 160 100
210 150
750170 12 260 200
310 250
750131 13 160 100
751724 13 210 150
750132 13 260 200
310 250
751725 13 450 400
600 550
750133 14 1000 950
160 100
750134 14 210 150
751726 14 260 200
750135 14 450 400
160 100
750136 14 210 150
310 260
750163 14 450 400
600 550
750171 14 800 750
750137 15 1000 950
751727 15 210 150
200 150
750138 15 250 200
300 250
751728 15 450 400
600 550
750139 16 200 150
750140 16 300 250
750141 16 450 400
200 150
750142 16 250 200
300 250
750164 16 450 400
600 550
751729 16 250 200
750172 16 300 250
751730 17 450 400
600 550
751765 18 250 200
450 400
751766 18 250 200
300 250
751767 18 450 400
751768 18 250 200
751769 18 450 400
250 200
751771 19 450 400

751772 19
751773 19
751774 20
751775 20

751776 20

751777 20
751778 20
751780 22
751781 22

751782 22

751783 22
751785 23
751786 23
751787 24

751788 24

751789 24
751790 25
751792 25
751795 26

751796 26

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

513

SDS DRILLS

DRILL BITS - MASONRY DRILLING RANGE

SDS Plus Drill Bits

SDS Plus 4-Cutter Drill Bits

CODE DIA (MM) OAL (MM) FL (MM) MATERIAL
250 200 Three-Piece Carbide Tip
752218 18 450 400
752219 18 250 200
752220 20 450 400
250 200
752221 20 450 400
250 200
752222 22 450 400
250 200
752223 22 450 400
752224 24 250 200
752225 24 450 400
250 200
752226 25 450 400
450 400
752227 25

752228 28
752229 28
752230 30

752231 30

752232 32

SDS Max Drill Bits

SDS Max 2-Cutter Drill Bits

CODE DIA (MM) OAL (MM) FL (MM) MATERIAL
340 200 Three-Piece Carbide Tip
750910 12 540 400
750911 12 690 550
920 800
750912 12 340 200
540 400
750913 12 920 800
340 200
750914 14 540 400
750915 14

750916 14

750917 15
750918 15

PAGE www.nessco.com.au

514

SDS DRILLS

DRILL BITS - MASONRY DRILLING RANGE

SDS Max Drill Bits

SDS Max 4-Cutter Drill Bits

CODE DIA (MM) OAL (MM) FL (MM) MATERIAL
340 200 Three-Piece Carbide Tip
754301 16 540 400
754302 16 740 600
754353 16 920 800
1320 1200
754303 16 340 200
540 400
754304 16 740 600
920 800
754305 18 1320 1200
754306 18 320 200
754354 18 520 400
720 600
754307 18 920 800
1320 1200
754308 18 320 200
520 400
754309 20 720 600
754310 20 920 800
754355 20 1320 1200
320 200
754311 20 520 400
320 200
754312 20 520 400
720 600
754313 22 920 800
754314 22 1320 1200
754356 22 520 400
370 250
754315 22 570 450
670 550
754316 22 920 800
1320 1200
754317 24 370 250
754318 24 570 450
754319 25 720 600
920 800
754320 25 370 250
570 450
754357 25 720 600
920 800
754321 25 1320 1200
754322 25 370 250
754323 26 570 450
670 550
754324 28 920 800
1320 1200
754325 28 370 250
570 450
754326 28 920 800
754327 28 370 250
754328 28 570 450
720 600
754329 30 370 250
570 450
754330 30
754358 30
754331 30
754332 32

754333 32

754359 32
754334 32
754335 32
754336 35

754337 35

754338 35
754339 35
754360 35
754340 37

754341 37

754342 37
754343 38
754344 38
754361 38

754345 40

754346 40

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

515

SDS DRILLS | DEMOLITION BITS

DRILL BITS - MASONRY DRILLING RANGE

SDS Max Drill Bits

SDS Max 4-Cutter Drill Bits

CODE DIA (MM) OAL (MM) FL (MM) MATERIAL
720 600 Three-Piece Carbide Tip
754362 40 920 800
1320 1200
754347 40 570 450
920 800
754348 40 570 450
570 450
754349 45

754350 45

754351 50

754352 52

SDS Plus Demolition Bits

SDS Plus Demolition Bits

CODE DESCRIPTION DIMENSIONS (MM)
250
751590 Bull point
20 x 250
751591 Cold chisel 20 x 250
751596 Cold chisel 40 x 250
751592 Wide chisel 40 x 250
60 x 250
751597 Wide chisel self sharpening 40 x 250
40 x 260
751598 Wide chisel self sharpening 22 x 250
32 x 150
751595 Tile chisel 32 x 300
751599 Tile chisel innovation
751594 Chasing gouge 250

751121 Mortar chisel TC tipped patented

751122 Mortar chisel TC tipped patented

751589 Chisel set 3 Pcs (bull point, cold chisel and cutter)

PAGE www.nessco.com.au

516

DEMOLITION BITS

DRILL BITS - MASONRY DRILLING RANGE

SDS Max Demolition Bits

SDS Max Demolition Bits

CODE DESCRIPTION DIMENSIONS (MM)
280
750990 Bull point 400
600
750991 Bull point 400

750992 Bull point 26 x 280
26 x 400
751032 Bull point self sharpening 26 x 600
26 x 400
750993 Cold chisel 50 x 300
50 x 400
750994 Cold chisel 80 x 300
115 x 350
750995 Cold chisel 50 x 350
50 x 300
751033 Cold chisel self sharpening 80 x 300
50 x 350
751028 Wide chisel 26 x 300
32 x 300
750997 Wide chisel 32 x 300
35 x 380
751034 Wide chisel 8 x 300
38 x 300
750999 Wide chisel 38 x 300
38 x 200
751038 Wide chisel self sharpening 38 x 270
75-110 x 400
751005 Tile chisel 20° angled 110 x 400
13 x 260
751037 Tile chisel 20° angled 16.5 x 260

751039 Long tile chisel 20° angled 400

750996 Chasing gouge

751036 Chasing gouge

751000 Chasing gouge for brick

751003 Chasing gouge with glides

751048 Brick raking chisel

751001 Mortar toothed chisel

751004 Mortar chisel tungsten tipped

751123 Mortar chisel TC tipped patented

751124 Mortar chisel TC tipped patented

751009 Asphalt cutter

751008 Scoop

751011 Ground rod driver

751010 Ground rod driver

751035 Chisel set 3-Pcs (bull point, cold chisel and cutter)

Hex Demolition Bits

30mm Hexagon with Collar Demolition Bits

CODE DESCRIPTION DIMENSIONS (MM)
410
751543 Bull point 400
751548 Bull point self sharpening
35 x 410
751544 Cold chisel 75 x 450
135 x 550
751545 Wide chisel
400
401921 Scoop 60 x 60
60 x 60
The following accessories have a connection of cone 22 to 26 mm 120 x 120
150 x 150
751546 Shank for tamping pad
400
751013 Bushing head 5 x 5 180
51mm ID diameter
751014 Bushing head 7 x 7 16mm
751015 Tamping pad
751016 Tamping pad

The following accessories have a connection of cone 39 to 44 mm

751547 Shank for tamping pad

751530 Tamping pad
797012 Star Post Socket
797136 Earth Rod Adapter

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

517

WOOD DRILLING RANGE

AUGER BITS 519
SPADE BITS 520
WOOD AUGER BITS 521
HOLESAWS 523

518

AUGER BITS

DRILL BITS - WOOD DRILLING RANGE

TurboMax Auger 4 CUTTER AUGER BIT WITH SCREW TIP FOR EFFORTLESS FEED
Bits & SPURS FOR CLEANER FASTER CUTTING

1/4” TurboMax Auger Bits Supplied in retail hang cards
Hex STYLE
CODE DRILL DIA OAL FL SHANK MATERIAL PACK
Features (MM) (MM) (MM) DIA (IN) QTY
165 55 10
SCREW TIP TS4C-10 10 165 55 1/4 10
FOR EFFORTLESS 165 70 10
FEED TS4C-13 13 165 70 1/4 10
CUTTING SPUR 165 80 10
FOR SMOOTHER TS4C-16 16 165 90 1/4 10
CLEAN HOLES 165 90 Auger 1/4” Hex 10
DESIGN FOR TS4C-19 19 HSS 4 Cutter
FASTER CHIP 1/4 PACK
EJECTION QTY
4X FASTER TS4C-22 22 1/4
THAN STANDARD 1
SPADE BITS TS4C-25 25 1/4
1
TS4C-32 32 7/16 Auger 7/16” Hex

TurboMax Auger Bits Sets

CODE DRILL DIA DESCRIPTION STYLE MATERIAL
(MM) Auger 1/4” Hex HSS 4 Cutter
Auger 1/4” Hex
TS4C-SET3 16 - 25 3 pce Turbomax Auger Bit Auger 7/16” Hex
Set 16, 19, 25mm

TS4C-SET5 16 - 32 5 pce Turbomax Auger Bit
Set 16, 19, 22, 25, 32mm

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

519

SPADE BITS

DRILL BITS - WOOD DRILLING RANGE

Turbo-Bore Spade Bits DOUBLE OUTSIDE SPURS PROVIDE A CLEANER HOLE AND
REDUCE VIBRATION. THE UNIQUE TWIST DESIGN CUTS FASTER
THAN STANDARD SPADE BITS

Turbo-Bore Spade Bits Supplied in individual hang packs

CODE DRILL DIA (MM) DRILL DIA (IN) STYLE MATERIAL PACK
1/4 QTY
TS08-06 6 50

1/4” TS08-08 8 5/16 50
Hex TS08-10 10 3/8 50
TS08-11 11 7/16 50

TS08-12 12 1/2 50

TS08-13 13 33/64 50

TS08-14 14 9/16 50

TS08-15 15 9/32 50

TS08-16 16 5/8 50

TS08-18 18 11/16 50

TS08-19 19 3/4 Spade Bit 1/4” Hex HSS Twist Groove 50

TS08-20 20 13/16 50

TS08-22 22 7/8 50

TS08-24 24 15/16 50

TS08-25 25 1 50

TS08-28 28 1-1/8 50

TS08-30 30 1-3/16 40

TS08-32 32 1-1/4 40

TS08-35 35 1-3/8 25

TS08-38 38 1-1/2 25

TS08-40 40 1-9/16 25

Spade Bit Extensions Supplied in carded hang packs

CODE OAL DESCRIPTION STYLE MATERIAL PACK
(MM) QTY
40
CMBHQR65 65 65mm Extension - Quick Release 30

CMBHQR150 150 150mm Extension - Quick Release 1

TS08-EXT150 150 150mm Extension Bar with Grub Spade Bit 1/4” Hex HSS Twist Groove 1
TS08-EXT300 Screw - supplied with Allen Key

300 300mm Extension Bar with Grub
Screw - supplied with Allen Key

Spade Bit Set Available in counter display box of 10

CODE DESCRIPTION STYLE MATERIAL PACK
QTY
TS08-SET8 8 pce Spade Bit Set with 150mm Extension Spade Bit 1/4” Hex HSS Twist Groove 10
Bar + Allen Key
Sizes: 10, 12, 16, 20, 22, 25, 32mm

PAGE www.nessco.com.au

520

WOOD AUGER BITS

DRILL BITS - WOOD DRILLING RANGE

Wood Auger Drill Bits HEX SHANK / SUITABLE FOR ALL TIMBERS / SHIPPER TYPE
TWIST WITH DUAL CUTTING SPUR

Wood Auger Drill Bits Supplied in plastic tube
STYLE
CODE DRILL DIA DRILL DIA OAL (MM) FL (MM) MATERIAL PACK
(MM) (IN) 100 HSS Dual Spur QTY

WA060200 6 1/4 200 1
1
WA060450 6 1/4 450 360 1
1
WA080200 8 5/16 200 100 1
1
WA080450 8 5/16 450 360 1
1
WA080600 8 5/16 600 360 1
1
WA100200 10 3/8 200 100 1
1
WA100450 10 3/8 450 360 1
1
WA100600 10 3/8 600 360 1
1
WA120200 12 1/2 200 100 1
1
WA120450 12 1/2 450 360 1
1
WA120600 12 1/2 600 360 1
1
WA140200 14 9/16 200 100 1
1
WA140450 14 9/16 450 360 1
1
WA140600 14 9/16 600 360 1
1
WA150200 15 - 200 100 1
1
WA160200 16 5/8 200 100 1
1
WA160450 16 5/8 450 360 1
1
WA160600 16 5/8 600 360 1
1
WA180200 18 23/32 200 100 1
1
WA180450 18 23/32 450 360 1
1
WA180600 18 23/32 600 360 Shipper Auger 1

WA200200 20 25/32 200 100

WA200450 20 25/32 450 360

WA200600 20 25/32 600 360

WA220200 22 7/8 200 100

WA220450 22 7/8 450 360

WA220600 22 7/8 600 360

WA240200 24 15/16 200 100

WA240600 24 15/16 600 360

WA250200 25 1 200 100

WA250450 25 1 450 360

WA260600 26 - 600 360

WA280200 28 1-1/8 200 100

WA280600 28 1-1/8 600 360

WA300200 30 1-3/16 200 100

WA300450 30 1-3/16 450 360

WA300600 30 1-3/16 600 360

WA320200 32 1-1/4 200 100

WA320600 32 1-1/4 600 360

WA340600 34 - 600 360

WA360600 36 - 600 360

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

521

WOOD AUGER BITS

DRILL BITS - WOOD DRILLING RANGE

Wood Auger Drill Bits FOR DRILLING HARDWOOD TIMBER / MATHIESON TYPE TWIST
FOR DRILLING IN HARDWOODS

Wood Auger Drill Bits Supplied in plastic tube
STYLE
CODE DRILL DIA DRILL DIA (IN) OAL (MM) MATERIAL PACK
(MM) Scotch Pattern Auger HSS Twin Cutting Edges QTY

WAS060230 6 1/4 230 1
5/16 230 1
WAS080230 8 3/8 220 1
3/8 330 1
WAS100220 10 7/16 330 1
7/16 440 1
WAS100330 10 1/2 220 1
1/2 330 1
WAS110330 11 1/2 230 1
9/16 230 1
WAS110440 11 9/16 330 1
5/8 220 1
WAS120220 12 5/8 330 1
23/32 230 1
WAS120330 12 3/4 220 1
3/4 330 1
WAS127230 12.7 25/32 220 1
25/32 330 1
WAS140230 14 13/16 220 1
13/16 330 1
WAS140330 14 7/8 220 1
7/8 330 1
WAS160220 16 7/8 440 1
15/16 330 1
WAS160330 16 220 1
1 330 1
WAS180230 18 1 440 1
1 330 1
WAS190220 19 1-3/16 440 1
1-1/4
WAS190330 19

WAS200220 20

WAS200330 20

WAS210220 21

WAS210330 21

WAS220220 22

WAS220330 22

WAS220440 22

WAS240330 24

WAS250220 25

WAS250330 25

WAS250440 25

WAS300330 30

WAS320440 32

PAGE www.nessco.com.au

522

HOLESAWS

DRILL BITS - WOOD DRILLING RANGE

Holesaws Bi-Metal 4/6 VARIABLE TOOTH / 35MM (1⅜”) CUTTING DEPTH

Holesaws - Bi-Metal Gold Series Supplied in carded hang pack
MATERIAL
CODE DIA (MM) DIA (IN) PACK QTY
9/16 M42 Cobalt Bi-Metal 12
HSV14 14 5/8 12
11/16 12
HSV16 16 3/4 12
12
HSV17 17 - 12
13/16 12
HSV19 19 12
7/8 12
HSV20 20 15/16 6
6
HSV21 21 1 6
1-1/16 6
HSV22 22 1-1/8 6
1-3/16 6
HSV24 24 1-1/4 6
1-5/16 6
HSV25 25 1-3/8 6
1-7/16 6
HSV27 27 1-1/2 6
1-9/16 6
HSV29 29 1-5/8 6
1-11/16 6
HSV30 30 1-3/4 6
1-25/32 6
HSV32 32 1-13/16 6
1-7/8 6
HSV33 33 1-31/32 6
6
HSV35 35 2 6
2-1/16 6
HSV37 37 2-1/8 6
2-5/32 6
HSV38 38 2-1/4 6
2-5/16 6
HSV40 40 2-3/8 6
2-1/2 6
HSV41 41 2-9/16 6
2-5/8 6
HSV43 43 2-21/32 6
2-3/4 6
HSV44 44 2-7/8 6
2-15/16 6
HSV45 45 6
3 6
HSV46 46 3-1/8 6
3-1/4 6
HSV48 48 3-3/8 6
3-1/2 6
HSV50 50 3-5/8 6
3-3/4 6
HSV51 51 3-7/8 6
3-15/16 6
HSV52 52 6
4 6
HSV54 54 4-1/8 6
4-1/4 6
HSV55 55 4-3/8 6
4-1/2
HSV57 57 4-3/4

HSV59 59 5
5-1/2
HSV60 60 5-3/4

HSV64 64 6

HSV65 65

HSV67 67

HSV68 68

HSV70 70

HSV73 73

HSV75 75

HSV76 76

HSV79 79

HSV83 83

HSV86 86

HSV89 89

HSV92 92

HSV95 95

HSV98 98

HSV100 100

HSV102 102

HSV105 105

HSV108 108

HSV111 111

HSV114 114

HSV121 121

HSV127 127

HSV140 140

HSV146 146

HSV152 152

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

523

HOLESAWS

DRILL BITS - WOOD DRILLING RANGE

Holesaws Bi-Metal 4/6 VARIABLE TOOTH / 35MM (1⅜”) CUTTING DEPTH
Arbors
Holesaw Sets - Bi-Metal Gold Series

CODE DESCRIPTION MATERIAL PACK QTY
M42 Cobalt Bi-Metal 10
HSKTR12 12 Piece Tradesman Holesaw Kit 10
16,19,22,29,35,38,44,51,54,64mm, Adaptor, 10
Small & Large Quick Release Arbors 10

HSKEL9 9 Piece Electrician Holesaw Kit
20,22,25,32,40,51,70mm, Adaptor, Small &
Large Quick Release Arbors

HSKPL9 9 Piece Plumber Holesaw Kit
19,22,29,38,44,51,57mm, Adaptor, Small &
Large Quick Release Arbors

HSKLO8 8 Piece Locksmith Holesaw Kit
15,16,20,25,35,54mm, Adaptor, Small & Large
Quick Release Arbors

FOR 14 - 30MM & 32 - 198MM HOLESAWS

Arbors, Pilot Drills & Adaptors Supplied carded for retail

CODE HOLESAW SHANK DESCRIPTION MATERIAL PACK QTY
SIZE (MM) HSS
6
ARB-1 14-30 11/32” Small Hex Shank to suit 10mm 3/8” chucks 6

ARBSP-1 14-30 SDS Plus Small Arbor - SDS Shank 1

DD1 14-30 8mm Profit Drill & Drop Arbor Complete for Bi-Metal 6
HSS Holesaws 14-30mm 6
6
ARB-2 32-198 7/16” Large Hex Shank to suit 12mm 1/2” chucks
1
ARB-3 32-198 11/32” Large Arbor - Quick Release Hex Shank
20
ARBSP-2 32-198 SDS Plus Large Arbor - SDS Shank
20
DD2 32-198 10mm Profit Drill & Drop Arbor Complete for Bi-Metal
HSS Holesaws 32-152mm 1

PLD-1 1/4” - 3-1/4” Pilot Hole Drill - Fits All Size Arbors

PLD-2 1/4” - 4-1/4” Pilot Hole Drill - Straight through style
arbors

ARB-ADP - - Adaptor to convert small to large arbors

PAGE www.nessco.com.au

524

HOLESAWS

DRILL BITS - WOOD DRILLING RANGE

Pro-Fit Multi-purpose FOR WOOD APPLICATIONS UP TO FIVE TIMES FASTER THAN
TCT Holesaws STANDARD HOLESAWS

Multi-purpose TCT Holesaws Supplied with hang tab
MATERIAL
CODE DIA (MM) DIA (IN) PACK QTY
5/8 Tungsten Carbide Tip 1
HSTCT-16 16 - 1
7/8 1
HSTCT-20 20 1 1
1
HSTCT-22 22 1 - 1/16 1
1 - 3/16 1
HSTCT-25 25 1 - 1/4 1
1 - 3/8 1
HSTCT-27 27 1 - 1/2 1
1 - 9/16 1
HSTCT-30 30 1 - 3/4 1
1 - 31/32 1
HSTCT-32 32 1
2 1
HSTCT-35 35 2 - 1/8 1
2 - 1/4 1
HSTCT-38 38 2 - 3/8 1
2 - 1/2 1
HSTCT-40 40 2 - 21/32 1
2 - 3/4 1
HSTCT-44 44 1
3 1
HSTCT-50 50 3 - 1/8 1
3 - 3/8 1
HSTCT-51 51 3 - 1/2 1
3 - 5/8 1
HSTCT-54 54
4
HSTCT-57 57 4- -1/2

HSTCT-60 60 5

HSTCT-64 64

HSTCT-68 68

HSTCT-70 70

HSTCT-76 76

HSTCT-80 80

HSTCT-86 86

HSTCT-89 89

HSTCT-92 92

HSTCT-102 102

HSTCT-114 114

HSTCT-125 125

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

525

HOLESAWS

DRILL BITS - WOOD DRILLING RANGE

Pro-Fit Multi-purpose FOR WOOD APPLICATIONS UP TO FIVE TIMES FASTER THAN
TCT Holesaws STANDARD HOLESAWS

Multi-purpose TCT Holesaw Kits CONTENTS PACK QTY
CODE 1

HSTCTKEL12 • 12 Piece Electricians TCT Holesaw Kit
• 20, 22, 25, 32, 40, 51, 70, 92mm
• + Small & Large Arbor
• + 2 Adaptor

HSTCTKPL12 • 12 Piece Plumbers TCT Holesaw Kit 1
• 20, 22, 25, 29, 38, 44, 51, 57mm
• + Small & Large Arbor
• + 2 Adaptor

HSTCTKTR16 • 16 Piece Tradesmans TCT Holesaw Kit 1
• 16, 20, 22, 25, 30, 35, 38, 44, 51, 57, 64, 76mm
• Adapter, Small, Large Quick Release Arbors
• + 2 Adaptor

Whole Saw In One!

The PRO-FIT Multi-Purpose Holesaw can cut a hole 5 times faster in wood, particle-board, pressed wood products,
ceramic materials like wall tiles, plastic and soft-stone material. Save time and money!
Save time and frustration with the new Drill & Drop system. A unique plug ejection system for easy removal of the drilled out
plug. Quickly change holesaw size with one push of a button.

Features

2
13

1 Cut a hole 4
2 Push the button
3 Pull the holesaw backwards
4 Release the plug

PAGE www.nessco.com.au

526

HOLESAWS

DRILL BITS - WOOD DRILLING RANGE

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

527

BROACH DRILLING RANGE

BROACH DRILLS 529
EJECTION PINS 530
BROACH STEP DRILLS 531
BROACH DRILLING MACHINES 531

528

BROACH DRILLS

DRILL BITS - BROACH DRILLING RANGE

Broach Drills ALTERNATE TEETH GEOMETRY FOR SUPERIOR CUTTING. FOR
USE IN MAGNETIC DRILLING MACHINES. SUITS WELDON STYLE
MACHINES EG. ROTAQUICK®, HOUGEN®, SLUGGER® & NITTO®
ONE-TOUCH™ MACHINES

Broach Drills - 25mm

CODE DRILL DIA (MM) DEPTH (MM) MATERIAL PACK QTY
High Quality HSS Cutters 1
CHSS1225* 12 25 1
1
CHSS1325 13 25 1
1
CHSS1425 14 25 1
1
CHSS1525 15 25 1
1
CHSS1625 16 25 1
1
CHSS1725 17 25 1
1
CHSS1825 18 25 1
1
CHSS1925 19 25 1
1
CHSS2025 20 25 1
1
CHSS2125 21 25 1
1
CHSS2225 22 25 1
1
CHSS2325 23 25 1
1
CHSS2425 24 25 1
1
CHSS2525 25 25 1
1
CHSS2625 26 25 1
1
CHSS2725 27 25 1
1
CHSS2825 28 25 1
1
CHSS2925 29 25 1
1
CHSS3025 30 25 1

CHSS3125 31 25

CHSS3225 32 25

CHSS3325 33 25

CHSS3425 34 25

CHSS3525 35 25

CHSS3625 36 25

CHSS3825 38 25

CHSS4025 40 25

CHSS4125 41 25

CHSS4225 42 25

CHSS4325 43 25

CHSS4425 44 25

CHSS4525 45 25

CHSS4625 46 25

CHSS4825 48 25

CHSS5025 50 25

CHSS5225 52 25

CHSS6325 63 25

CHSS6525 65 25

* 12mm Cutter takes reduced size pin # EJPIN82-RE

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

529

BROACH DRILLS

DRILL BITS - BROACH DRILLING RANGE

Broach Drills ALTERNATE TEETH GEOMETRY FOR SUPERIOR CUTTING. FOR
Ejection Pins USE IN MAGNETIC DRILLING MACHINES. SUITS WELDON STYLE
MACHINES EG. ROTAQUICK®, HOUGEN®, SLUGGER® & NITTO®
ONE-TOUCH™ MACHINES

Broach Drills - 50mm

CODE DRILL DIA (MM) DEPTH (MM) MATERIAL PACK QTY
50 High Quality HSS Cutters 1
CHSS1250* 12 1
1
CHSS1350 13 50 1
1
CHSS1450 14 50 1
1
CHSS1550 15 50 1
1
CHSS1650 16 50 1
1
CHSS1750 17 50 1
1
CHSS1850 18 50 1
1
CHSS1950 19 50 1
1
CHSS2050 20 50 1
1
CHSS2150 21 50 1
1
CHSS2250 22 50 1

CHSS2350 23 50

CHSS2450 24 50

CHSS2550 25 50

CHSS2650 26 50

CHSS2750 27 50

CHSS2850 28 50

CHSS2950 29 50

CHSS3050 30 50

CHSS3150 31 50

CHSS3250 32 50

CHSS4050 40 50

* 12mm Cutter takes reduced size pin # EJPIN82-RE

Ejection Pins to suit Broach Drills

CODE DESCRIPTION MATERIAL PACK QTY
1
EJPIN77 77mm Length x 6.35mm Diameter

EJPIN82-RE 82mm Length x 4.80mm Diameter - to suit 12mm Cutter High Quality HSS Cutters 1
1
EJPIN102 102mm Length x 6.35mm Diameter

EJPIN102-RE 102mm Length x 4.80mm Diameter - to suit 12mm Cutter 1

PAGE www.nessco.com.au

530

BROACH DRILLS & MACHINES
DRILL BITS - BROACH DRILLING RANGE

Broach Step Drills ONE STEP DRILL = UP TO 5 DRILLS
Broach Drilling
Machines Broach Step Drills

CODE SHANK DIA MAX MATERIAL DESCRIPTION MATERIAL PACK
(MM) THICKNESS (MM) High Quality HSS QTY
8 - 16mm Self Starter Broach Step Drill 8,
MPSD0816 6 12 10, 12, 14, 16mm 1
12 10 - 18mm Self Starter Broach Step Drill 1
MPSD1018 8 12 10, 12, 14, 16, 18mm 1
12 20 - 28mm Self Starter Broach Step Drill 1
MPSD2028 10 12 20, 22, 24, 26, 28mm 1
30 - 38mm Follow On Broach Step Drill
MPSD3038 11 30, 32, 34, 36, 38mm
40 - 48mm Follow On Broach Step Drill
MPSD4048 12 40, 42, 44, 46, 48mm

FULL RANGE OF BROACH DRILLING MACHINES AVAILABLE TO
SUIT ALL APPLICATIONS

Maxbor Revolution Low Profile Drill

CODE MBREVOLP CUTTER CAPACITY 12mm to 35mm x 25mm depth
SPINDLE STROKE 38mm (travel)
POWER 1100 watt SIZE H 200mm x W 110mm x D 285mm

MAGNETIC ADHESION 1500kgs WEIGHT 10kgs

SPEED 690 / 390 rpm (no load
/ load)

STROKE 26mm

Maxbor Revolution 35mm Electromagnetic Drill

CODE MBREVOLP CUTTER CAPACITY 12mm to 35mm x 50mm depth
110 –200mm (adjustable slide)
POWER 1100 watt SPINDLE STROKE H 305mm x W 115mm x D 270mm

MAGNETIC ADHESION 1700kgs SIZE 14kgs

SPEED 450 / 270rpm (no load WEIGHT
/ load)

Maxbor 70mm Electromagnetic Drill

CODE MB70-C CUTTER CAPACITY 12mm to 32mm x 50mm depth
TAPPING CAPACITY M5 to M12
POWER 770 watt SIZE H 300mm x W 90mm x D 240mm
WEIGHT 12.5kgs
MAGNETIC ADHESION 1000kgs

SPEED 25 - 550rpm (no load)

DRILLING CAPACITY 3mm to 18mm

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

531

CARBIDE BURRS

CYLINDRICAL BURRS 533
BALL BURRS 535
TREE RADIUS | DOUBLE ENDED BURRS 536
TREE POINTED NOSE | FLAME BURRS 537
INCLUDED ANGLE | POINTED CONE BURRS 538
OVAL | INVERTED TAPER BURRS 539
COUNTERSINKS 540
HEX SHANK DRILLS 541

532

CYLINDRICAL BURRS
DRILL BITS - CARBIDE BURRS

Cylindrical Burrs WITH SMOOTH END

Cylindrical Burrs - Smooth End 1/8”

CODE HEAD DIA OAL (IN) FL (IN) SHANK STYLE TYPE MATERIAL PACK
(IN) DIA (IN) SA-41 Double Cut Tungsten Carbide QTY
SA-42
SA-41DC 1/16 1-1/2 1/4 1/8 SA-43 TYPE MATERIAL 1
SA-42DC 3/32 1-1/2 7/16 1/8 SA-52 1
SA-43DC 1/8 1-1/2 9/16 1/8 SA-53 Double Cut Tungsten Carbide 1
SA-52DC 5/32 1-1/2 1/2 1/8 SA-51 1
SA-53DC 3/16 1-1/2 1/2 1/8 TYPE MATERIAL 1
SA-51DC 1/4 1/2 1/8 Double Cut Tungsten Carbide 1
2
TYPE MATERIAL PACK
Cylindrical Burrs - Smooth End 1/4” Double Cut Tungsten Carbide QTY

CODE HEAD DIA OAL (IN) FL (IN) SHANK STYLE 1
(IN) DIA (IN) SA-11 1
SA-14 1
SA-11DC 1/8 2 1/2 1/4 SA-1 1
SA-14DC 3/16 2 5/8 1/4 SA-2 1
SA-1DC 1/4 2 1/4 1/4 SA-3 1
SA-2DC 5/16 2-3/4 3/4 1/4 SA-4 1
SA-3DC 3/8 2-3/4 3/4 1/4 SA-5 1
SA-4DC 7/16 3 1 1/4 SA-6 1
SA-5DC 1/2 3 1 1/4 SA-7 1
SA-6DC 5/8 3 1 1/4 SA-9
SA-7DC 3/4 3 1 1/4 PACK
SA-9DC 3 1 1/4 QTY
1
1
Long Series 6” Cylindrical Burrs - Smooth End 1/4” 1
1
CODE HEAD DIA OAL (IN) FL (IN) SHANK STYLE
(IN) DIA (IN) PACK
QTY
SA-1L6 1/4 6-1/2 1/2 1/4 SA-1
SA-3L6 3/8 6-3/4 3/4 1/4 SA-3 1
SA-5L6 1/2 7 1 1/4 SA-5 1
1
Aluminium Cut Cylindrical Burrs - Smooth End 1/4” 1
1
CODE HEAD DIA OAL (IN) FL (IN) SHANK STYLE
(IN) DIA (IN)

SA-1AL 1/4 2 1/4 1/4 SA-1
SA-3AL 3/8 2-3/4 3/4 1/4 SA-3
SA-5AL 1/2 3 1 1/4 SA-5
SA-6AL 5/8 3 1 1/4 SA-6
SA-7AL 3/4 3 1 1/4 SA-7

Cylindrical Burrs WITH END CUT

Cylindrical Burrs - End Cut 1/8”

CODE HEAD DIA OAL (IN) FL (IN) SHANK STYLE TYPE MATERIAL PACK
(IN) 1/2 DIA (IN) SB-51 Double Cut Tungsten Carbide QTY

SB-51DC 1/4 2 1/8 STYLE TYPE MATERIAL 1
SB-11
Cylindrical Burrs - End Cut 1/4” SHANK SB-14 Double Cut Tungsten Carbide PACK
DIA (IN) SB-1 QTY
CODE HEAD DIA OAL (IN) FL (IN) SB-2
(IN) 1/2 1/4 SB-3 1
5/8 1/4 SB-4 1
SB-11DC 1/8 2 1/4 1/4 SB-5 1
SB-14DC 3/16 2 3/4 1/4 SB-6 1
SB-1DC 1/4 2 3/4 1/4 SB-7 1
SB-2DC 5/16 2-3/4 1 1/4 1
SB-3DC 3/8 2-3/4 1 1/4 1
SB-4DC 7/16 3 1 1/4 1
SB-5DC 1/2 3 1 1/4 1
SB-6DC 5/8 3
SB-7DC 3/4 3

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

533

CYLINDRICAL BURRS

DRILL BITS - CARBIDE BURRS

Cylindrical Burrs BALL NOSE

Cylindrical Burrs - Ball Nose 1/8”

CODE HEAD DIA OAL (IN) FL (IN) SHANK STYLE TYPE MATERIAL PACK
(IN) DIA (IN) SC-41 Double Cut Tungsten Carbide QTY
SC-42
SC-41DC 3/32 1-1/2 7/16 1/8 SC-52 1
SC-53 1
SC-42DC 1/8 1-1/2 9/16 1/8 SC-51 1
1
SC-52DC 5/32 1-1/2 1/2 1/8 1

SC-53DC 3/16 1-1/2 1/2 1/8

SC-51DC 1/4 2 3/16 1/8

Cylindrical Burrs - Ball Nose 1/4”

CODE HEAD DIA OAL (IN) FL (IN) SHANK STYLE TYPE MATERIAL PACK
(IN) DIA (IN) SC-11 Double Cut Tungsten Carbide QTY
SC-14
SC-11DC 1/8 2 1/2 1/4 SC-1 1
SC-2 1
SC-14DC 3/16 2 5/8 1/4 SC-3 1
SC-4 1
SC-1DC 1/4 2 1/4 1/4 SC-5 1
SC-6 1
SC-2DC 5/16 2-3/4 3/4 1/4 SC-7 1
1
SC-3DC 3/8 2-3/4 3/4 1/4 1

SC-4DC 7/16 3 1 1/4

SC-5DC 1/2 3 1 1/4

SC-6DC 5/8 3 1 1/4

SC-7DC 3/4 3 1 1/4

Long Series 6” Cylindrical Burrs - Ball Nose 1/4”

CODE HEAD DIA OAL (IN) FL (IN) SHANK STYLE TYPE MATERIAL PACK
(IN) DIA (IN) SC-1 Double Cut Tungsten Carbide QTY

SC-1L6 1/4 6-1/2 1/2 1/4 1
1
SC-3L6 3/8 6-3/4 3/4 1/4 SC-3 1

SC-5L6 1/2 7 1 1/4 SC-5

Aluminium Cut Cylindrical Burrs - Ball Nose 1/4”

CODE HEAD DIA OAL (IN) FL (IN) SHANK STYLE TYPE MATERIAL PACK
(IN) DIA (IN) SC-1 Double Cut Tungsten Carbide QTY

SC-1AL 1/4 2 1/4 1/4 1
1
SC-3AL 3/8 2-3/4 3/4 1/4 SC-3 1
1
SC-5AL 1/2 3 1 1/4 SC-5 1

SC-6AL 5/8 3 1 1/4 SC-6

SC-7AL 3/4 3 1 1/4 SC-7

PAGE www.nessco.com.au

534

BALL BURRS

DRILL BITS - CARBIDE BURRS

Ball Burrs BALL HEAD

Ball Burrs 1/8”

CODE HEAD DIA OAL (IN) FL (IN) SHANK STYLE TYPE MATERIAL PACK
(IN) 7/16 DIA (IN) SD-41 Double Cut Tungsten Carbide QTY

SD-41DC 3/32 1-1/2 1/8 1
1
SD-42DC 1/8 1-1/2 9/16 1/8 SD-42 1
1
SD-53DC 3/16 1-1/2 1/2 1/8 SD-53

SD-51DC 1/4 1-1/2 1/2 1/8 SD-51

Ball Burrs 1/4”

CODE HEAD DIA OAL (IN) FL (IN) SHANK STYLE TYPE MATERIAL PACK
(IN) 3/32 DIA (IN) SD-11 Double Cut Tungsten Carbide QTY

SD-11DC 1/8 2 1/4 1
1
SD-14DC 3/16 2 5/32 1/4 SD-14 1
1
SD-1DC 1/4 2 7/32 1/4 SD-1 1
1
SD-2DC 5/16 2-1/4 1/4 1/4 SD-2 1
1
SD-3DC 3/8 2-5/16 5/16 1/4 SD-3 1
1
SD-4DC 7/16 2-3/8 3/8 1/4 SD-4

SD-5DC 1/2 2-7/16 7/16 1/4 SD-5

SD-6DC 5/8 2-9/16 9/16 1/4 SD-6

SD-7DC 3/4 2-11/16 11/16 1/4 SD-7

SD-9DC 1 2-15/16 15/16 1/4 SD-9

Long Series 6” Ball Burrs 1/4”

CODE HEAD DIA OAL (IN) FL (IN) SHANK STYLE TYPE MATERIAL PACK
(IN) 7/32 DIA (IN) SD-1 Double Cut Tungsten Carbide QTY

SD-1L6 1/4 6-1/8 1/4 1
1
SD-3L6 3/8 6-1/4 5/16 1/4 SD-3 1

SD-5L6 1/2 6-3/8 7/16 1/4 SD-5

Aluminium Cut Ball Burrs 1/4”

CODE HEAD DIA OAL (IN) FL (IN) SHANK STYLE TYPE MATERIAL PACK
(IN) 7/32 DIA (IN) SD-1 Double Cut Tungsten Carbide QTY

SD-1AL 1/4 2 1/4 1
1
SD-3AL 3/8 2-5/16 5/16 1/4 SD-3 1
1
SD-5AL 1/2 2-7/16 7/16 1/4 SD-5

SD-6AL 5/8 2-9/16 9/16 1/4 SD-6

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

535

TREE RADIUS | DOUBLE ENDED BURRS

DRILL BITS - CARBIDE BURRS

Tree Radius Nose TREE RADIUS NOSE HEAD
Burrs

Tree Radius Nose Burrs 1/8”

CODE HEAD DIA OAL (IN) FL (IN) SHANK STYLE TYPE MATERIAL PACK
(IN) DIA (IN) Double Cut Tungsten Carbide QTY
1/4 SF-41
SF-41DC 1/8 1-1/2 1/2 1/8 SF-42 1
1/2 1/8 SF-53 1
SF-42DC 1/8 1-1/2 1/2 1/8 SF-51 1
1/8 1
SF-53DC 3/16 1-1/2

SF-51DC 1/4 2

Tree Radius Nose Burrs 1/4”

CODE HEAD DIA OAL (IN) FL (IN) SHANK STYLE TYPE MATERIAL PACK
(IN) DIA (IN) Double Cut Tungsten Carbide QTY
3/4 SF-1
SF-1DC 1/4 2 3/4 1/4 SF-3 1
1 1/4 SF-4 1
SF-3DC 3/8 2-3/4 1 1/4 SF-5 1
3/4 1/4 SF-13 1
SF-4DC 7/16 3 1 1/4 SF-6 1
1-1/4 1/4 SF-14 1
SF-5DC 1/2 3 1 1/4 SF-7 1
1-1/2 1/4 SF-15 1
SF-13DC 1/2 2-3/4 1/4 1

SF-6DC 5/8 3

SF-14DC 3/4 3-1/4

SF-7DC 3/4 3

SF-15DC 3/4 3-1/2

Long Series 6” Tree Radius Nose Burrs 1/4”

CODE HEAD DIA OAL (IN) FL (IN) SHANK STYLE TYPE MATERIAL PACK
(IN) DIA (IN) Double Cut Tungsten Carbide QTY
SF-1
SF-1L6 1/4 6-1/2 1/2 1/4 SF-3 1
SF-5 1
SF-3L6 3/8 6-3/4 3/4 1/4 1

SF-5L6 1/2 7 1 1/4

Aluminium Cut Tree Radius Nose Burrs 1/4”

CODE HEAD DIA OAL (IN) FL (IN) SHANK STYLE TYPE MATERIAL PACK
(IN) DIA (IN) Double Cut Tungsten Carbide QTY
SF-1
SF-1AL 1/4 2 1/4 1/4 SF-3 1
SF-5 1
SF-3AL 3/8 2-3/4 3/4 1/4 SF-6 1
1
SF-5AL 1/2 3 1 1/4

SF-6AL 5/8 3 1 1/4

90o Cone Shape 90O CONE SHAPE HEAD
Double Ended Burrs

90o Cone Shape Double Ended Burr 1/4”

CODE HEAD DIA OAL FL SHANK STYLE ANGLE TYPE MATERIAL PACK
(IN) (IN) (IN) DIA (IN) SK-1 90° Double Cut Tungsten Carbide QTY

SK-1SC 1/4 2 1/8 1/4 1

PAGE www.nessco.com.au

536

TREE POINTED NOSE | FLAME BURRS
DRILL BITS - CARBIDE BURRS

Tree Pointed Nose TREE POINTED NOSE HEAD
Burrs

Tree Pointed Nose Burrs 1/8”

CODE HEAD DIA OAL (IN) FL (IN) SHANK STYLE TYPE MATERIAL PACK
(IN) DIA (IN) Double Cut Tungsten Carbide QTY
1/4 SG-41
SG-41DC 1/8 1-1/2 5/16 1/8 SG-42 1
3/8 1/8 SG-43 1
SG-42DC 1/8 1-1/2 1/2 1/8 SG-44 1
1/2 1/8 SG-53 1
SG-43DC 1/8 1-1/2 1/2 1/8 SG-51 1
1/8 1
SG-44DC 1/8 1-1/2

SG-53DC 3/16 1-1/2

SG-51DC 1/4 2

Tree Radius Nose Burrs 1/4”

CODE HEAD DIA OAL (IN) FL (IN) SHANK STYLE TYPE MATERIAL PACK
(IN) DIA (IN) Double Cut Tungsten Carbide QTY
3/4 SG-1
SG-1DC 1/4 2 3/4 1/4 SG-2 1
3/4 1/4 SG-3 1
SG-2DC 5/16 2-3/4 3/4 1/4 SG-13 1
1 1/4 SG-5 1
SG-3DC 3/8 2-3/4 1 1/4 SG-6 1
1 1/4 SG-7 1
SG-13DC 1/2 2-3/4 1/4 1

SG-5DC 1/2 3

SG-6DC 5/8 3

SG-7DC 3/4 3

Flame Burrs FLAME HEAD

Flame Head Burrs 1/8”

CODE HEAD DIA OAL (IN) FL (IN) SHANK STYLE TYPE MATERIAL PACK
(IN) 1/4 DIA (IN) SH-41 Double Cut Tungsten Carbide QTY
5/16 SH-53
SH-41DC 1/8 1-1/2 1/8 1
1/8 1
SH-53DC 3/16 1-1/2

Flame Head Burrs 1/4”

CODE HEAD DIA OAL (IN) FL (IN) SHANK STYLE TYPE MATERIAL PACK
(IN) DIA (IN) Double Cut Tungsten Carbide QTY
3/4 SH-2
SH-2DC 5/16 2-3/4 1-1/4 1/4 SH-5 1
1-7/16 1/4 SH-6 1
SH-5DC 1/2 3-1/4 1-5/8 1/4 SH-7 1
1/4 1
SH-6DC 5/8 3-7/16

SH-7DC 3/4 3-5/8

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

537

INCLUDED ANGLE | POINTED CONE BURRS

DRILL BITS - CARBIDE BURRS

Included Angle INCLUDED ANGLE HEAD
Burrs

Included Angle Head Burrs 1/8”

CODE HEAD DIA OAL FL SHANK STYLE ANGLE TYPE MATERIAL PACK
(IN) (IN) (IN) DIA (IN) 10° Double Cut Tungsten Carbide QTY
SL-41 8°
SL-41DC 1/8 1-1/2 3/8 1/8 SL-42 14° TYPE MATERIAL 1
1/8 SL-53 Double Cut Tungsten Carbide 1
SL-42DC 1/8 1-1/2 1/2 1/8 ANGLE 1
14° TYPE MATERIAL
SL-53DC 3/16 1-1/2 1/2 14° Double Cut Tungsten Carbide PACK
14° QTY
Included Angle Head Burrs 1/4” 14° TYPE MATERIAL
14° Double Cut Tungsten Carbide 1
CODE HEAD DIA OAL FL SHANK STYLE 14° 1
(IN) (IN) (IN) DIA (IN) 1
SL-1 ANGLE 1
SL-1DC 1/4 2 5/8 1/4 SL-2 14° 1
1/4 SL-3 14° 1
SL-2DC 5/16 2-7/8 7/8 1/4 SL-4 14°
1/4 SL-6 PACK
SL-3DC 3/8 3-1/16 1-1/16 1/4 SL-7 ANGLE QTY
1/4 14°
SL-4DC 1/2 3-1/8 1-1/8 14° 1
14° 1
SL-6DC 5/8 3-5/16 1-5/16 1

SL-7DC 3/4 3-1/2 1-1/2 PACK
QTY
6” Long Series Included Angle Head Burrs 1/4”
1
CODE HEAD DIA OAL FL SHANK STYLE 1
(IN) (IN) (IN) DIA (IN) 1

SL-1L6 1/4 6-5/8 5/8 1/4 SL-1

SL-3L6 3/8 7 1-1/16 1/4 SL-3

SL-4L6 1/2 7-1/8 1-1/8 1/4 SL-4

Aluminium Cut Included Angle Head Burrs 1/4”

CODE HEAD DIA OAL FL SHANK STYLE
(IN) (IN) (IN) DIA (IN)

SL-3AL 3/8 3-1/16 1-1/16 1/4 SL-3

SL-4AL 1/2 3-1/8 1-1/8 1/4 SL-4

SL-6AL 5/8 3-5/16 1-5/16 1/4 SL-6

Pointed Cone Burrs POINTED CONE HEAD

Pointed Cone Head Burrs 1/8”

CODE HEAD DIA OAL FL SHANK STYLE ANGLE TYPE MATERIAL PACK
(IN) (IN) (IN) DIA (IN) Double Cut Tungsten Carbide QTY
SM-41 12°
SM-41DC 1/8 1-1/2 3/8 1/8 SM-42 14° MATERIAL 1
1/8 SM-43 7° Tungsten Carbide 1
SM-42DC 1/8 1-1/2 7/16 1/8 SM-53 16° 1
1/8 SM-51 22° 1
SM-43DC 1/8 1-1/2 5/8 1/8 1

SM-53DC 3/16 1-1/2 1/2 PACK
QTY
SM-51DC 1/4 2 1/2
1
Pointed Cone Head Burrs 1/4” 1
1
CODE HEAD DIA OAL FL SHANK STYLE ANGLE TYPE 1
(IN) (IN) (IN) DIA (IN) Double Cut 1
SM-1 22° 1
SM-1DC 1/4 2 1/2 1/4 SM-2 14°
1/4 SM-3 10°
SM-2DC 1/4 2 3/4 1/4 SM-4 28°
1/4 SM-5 28°
SM-3DC 1/4 2 1 1/4 SM-6 31°
1/4
SM-4DC 3/8 2-5/8 5/8

SM-5DC 1/2 2-7/8 7/8

SM-6DC 5/8 3 1

PAGE www.nessco.com.au

538

OVAL | INVERTED TAPER BURRS
DRILL BITS - CARBIDE BURRS

Oval Burrs OVAL HEAD

Oval Burrs 1/8”

CODE HEAD DIA OAL (IN) FL (IN) SHANK STYLE TYPE MATERIAL PACK
(IN) 7/32 DIA (IN) SE-41 Double Cut Tungsten Carbide QTY
1-1/2 9/32 SE-53
SE-41DC 1/8 1-1/2 3/8 1/8 SE-51 TYPE MATERIAL 1
1-7/8 1/8 Double Cut Tungsten Carbide 1
SE-53DC 3/16 FL (IN) 1/8 STYLE 1
3/8 SE-1 TYPE MATERIAL
SE-51DC 1/4 5/8 SHANK SE-3 Double Cut Tungsten Carbide PACK
7/8 DIA (IN) SE-5 QTY
Oval Burrs 1/4” 1 SE-6 TYPE MATERIAL
1 1/4 SE-7 Double Cut Tungsten Carbide 1
CODE HEAD DIA OAL (IN) 1/4 1
(IN) FL (IN) 1/4 STYLE 1
2 5/8 1/4 SE-3 1
SE-1DC 1/4 2-5/8 7/8 1/4 SE-5 1
2-7/8
SE-3DC 3/8 FL (IN) SHANK STYLE PACK
3 5/8 DIA (IN) SE-3 QTY
SE-5DC 1/2 3 7/8 SE-5
1 1/4 SE-6 1
SE-6DC 5/8 1/4 1

SE-7DC 3/4 SHANK PACK
DIA (IN) QTY
Long Series 6” Oval Burrs 1/4”
1/4 1
CODE HEAD DIA OAL (IN) 1/4 1
(IN) 1/4 1

SE-3L6 3/8 6-5/8

SE-5L6 1/2 6-7/8

Aluminium Cut Oval Burrs 1/4”

CODE HEAD DIA OAL (IN)
(IN)

SE-3AL 3/8 2-5/8

SE-5AL 1/2 2-7/8

SE-6AL 5/8 3

Inverted Taper Burrs INVERTED TAPER HEAD

Inverted Taper Head Burrs 1/8”

CODE HEAD DIA OAL FL SHANK STYLE ANGLE TYPE MATERIAL PACK
(IN) (IN) (IN) DIA (IN) Double Cut Tungsten Carbide QTY
SN-42 10°
SN-42DC 1/8 1-1/2 3/16 1/8 SN-53 10° MATERIAL 1
1/8 SN-51 10° Tungsten Carbide 1
SN-53DC 3/16 1-1/2 1/4 1/8 1

SN-51DC 1/4 1-3/4 1/4 PACK
QTY
Inverted Taper Head Burrs 1/4”
1
CODE HEAD DIA OAL FL SHANK STYLE ANGLE TYPE 1
(IN) (IN) (IN) DIA (IN) Double Cut 1
SN-1 10° 1
SN-1DC 1/4 2 5/16 1/4 SN-2 13° 1
1/4 SN-3 16° 1
SN-2DC 3/8 2-3/8 3/8 1/4 SN-4 28°
1/4 SN-5 19°
SN-3DC 1/2 2-1/2 1/2 1/4 SN-6 18°
1/4
SN-4DC 1/2 2-1/2 1/2

SN-5DC 5/8 2-5/8 5/8

SN-6DC 5/8 2-3/4 3/4

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

539

COUNTERSINKS

DRILL BITS - CARBIDE BURRS

Countersink 90O ANGLE

Countersink - 1 Flute

CODE HEAD DIA HEAD DIA (IN) OAL (MM) SHANK DIA SHANK LENGTH MATERIAL PACK
(MM) (MM) (MM) HSS Cobalt QTY
MATERIAL
CS1-10 10 5/16 46 6 - 1
HSS Cobalt 1
CS1-16 16 5/8 46.5 8 - 1
MATERIAL 1
CS1-20 20 3/4 47 10 - HSS Cobalt 1
MATERIAL
CS1-25 25 1 51 10 - HSS Cobalt PACK
QTY
CS1-30 30 1-3/16 71 12 - MATERIAL
HSS Cobalt 1
Countersink - 3 Flute 1
1
CODE HEAD DIA HEAD DIA (IN) OAL (MM) SHANK DIA CAPACITY MIN- 1
(MM) (MM) MAX 1
1
CS3-6.3 6.3 1/4 46 5 1 - 6.3 1
1
CS3-8.3 8.3 21/64 46 6 1 - 8.3 1
1
CS3-10.4 10.4 13/32 54 6 1 - 10.4 1

CS3-12.4 12.4 1/2 54 8 2 - 12.4 PACK
QTY
CS3-14.4 14.4 9/16 56 8 2 - 14.4
1
CS3-16.5 16.5 21/32 60 10 2 - 16.5 1
1
CS3-20.5 20.5 13/16 63 10 2 - 20.5 1

CS3-25 25 1 51 10 3 - 25 PACK
QTY
CS3-30 30 1-3/16 71 12 3 - 30
1
CS3-40 40 1-9/16 80 12 3 - 40 1
1
CS3-SET6 6 pce 3 Flute Countersink set in metal case 6.3, 8, 10, 12, 16, 20mm 1
1
Countersink - 5 Flute 1
1
CODE HEAD DIA HEAD DIA (IN) OAL (MM) SHANK DIA SHANK LENGTH
(MM) (MM) (MM) PACK
QTY
CS5-8 8 5/16 35 5 20.5
1
CS5-12 12 1/2 39 6.35 20.5
1
CS5-16 16 5/8 52 8 32

CS5-20 20 3/4 58 10 35

Suitable for countersinking ferrous metals, hard plastic and wood.

Countersink - Cross Hole

CODE HEAD DIA HEAD DIA (IN) OAL (MM) SHANK DIA CAPACITY MIN-
(MM) (MM) MAX

CSCH-10 6.3 - 46 6 4-9

CSCH-14 8.3 - 46 8 6 - 13

CSCH-21 10.4 - 64.5 10 8 - 19

CSCH-28 12.4 - 80 12 10 - 24

CSCH-35 14.4 - 97 15 12 - 32

CSCH-44 16.5 - 115 15 16 - 40

CSCH-SET3 3 pce Cross Hole Countersink set in plastic case 10, 14, 21.5mm

Countersink Sets - 3 Flute & Crosshole

CODE DIA (MM) DESCRIPTION

CS3-SET6 6.3 - 30 6 pce 3 Flute Countersink in metal case
CSCH-SET3 10 - 21.5 6.3, 8, 10, 12, 16, 20mm
Cross Hole Countersink Set 10, 14, 21.5mm

PAGE www.nessco.com.au

540

HEX SHANK DRILLS
DRILL BITS - CARBIDE BURRS

Drill & Countersink 1/4” (6.3MM) HEXAGONAL SHANK WITH GRUB SCREW
Mini Chuck FOR REPLACING DRILL

1/4” TCT Drill & Countersinks - Tungsten Carbide
Hex
CODE DRILL DIA DRILL DIA COUNTERSINK COUNTERSINK STYLE MATERIAL PACK
1/4” (MM) (IN) DIA (MM) DIA (IN) 1/4” Hex Shank Tungsten QTY
Hex 3/8 Carbide
1/4” AS02004 2.0 5/64 9.5 3/8 1
Hex 3/8 1
AS02404 2.4 3/32 9.5 3/8 1
3/8 1
AS02504 2.5 - 9.5 3/8 1
3/8 1
AS02804 2.8 7/64 9.5 3/8 1
1/2 1
AS03004 3.0 - 9.5 1/2 1
1/2 1
AS03204 3.2 1/8 9.5 1/2 1
1
AS03504 3.5 - 9.5

AS03604 3.6 9/64 9.5

AS04004 4.0 5/32 12.7

AS04804 4.8 3/16 12.7

AS05004 5.0 - 12.7

AS06004 6.0 - 12.7

TCT Drill & Countersinks - HSS

CODE DRILL DIA DRILL DIA COUNTERSINK COUNTERSINK STYLE MATERIAL PACK
(MM) (IN) DIA (MM) DIA (IN) 1/4” Hex Shank HSS QTY
9.5 3/8
HS02404 2.4 3/32 9.5 3/8 1
9.5 3/8 1
HS02504 2.5 - 9.5 3/8 1
9.5 3/8 1
HS02804 2.8 7/64 9.5 3/8 1
12.7 1/2 1
HS03004 3.0 - 12.7 1/2 1
1
HS03204 3.2 1/8

HS03504 3.5 -

HS03604 3.6 9/64

HS04004 4.0 5/32

1/4” Quick Change Hex Drill Adaptor with HSS Drill Bit

CODE DRILL DIA DRILL DIA COUNTERSINK COUNTERSINK STYLE MATERIAL PACK
(MM) (IN) DIA (MM) DIA (IN) 1/4” Hex Shank HSS QTY

TDS0200 2.0 5/64 - - 1
1
TDS0240 2.4 3/32 - - 1
1
TDS0280 2.8 - - - 1
1
TDS0300 3.0 7/64 - - 1
1
TDS0320 3.2 - - - 1
1
TDS0350 3.5 1/8 - - 1
1
TDS0360 3.6 - - - 1
1
TDS0400 4.0 9/64 - -

TDS0440 4.4 5/32 - -

TDS0480 4.76 3/16 - -

TDS0500 5.0 - - -

TDS0560 5.6 7/32 - -

TDS0600 6.0 15/64 - -

TDS0630 6.35 1/4 - -

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

541

DEBURRING 543
ACCESSORIES 544
545
DEBURRING TOOLS
DEBURRING BLADES
DEBURRING SETS

542

DEBURRING TOOLS

DRILL BITS - DEBURRING ACCESSORIES

Comfort Grip Deburrer - C-Type Comfort Grip Multi-Deburrer

CODE DESCRIPTION PACK QTY CODE DESCRIPTION PACK QTY
12 1
DT-MK • New composite acetal & rubber body provides ergonomic DT-5C-MK • New composite T-SD-MK acetal & rubber body
comfort grip • Telescopic holder takes C type blades
• Unique push-chuck holding system for easy adjustment &
• Secure quick-release blade holding system
• Blade storage in rear replacement
• Supplied with C-10, C-20 & C-30 blades • Comfort grip rubber nose area
• Supplied with C-10, C-20, C-30, C-15 & C-35 blades

Comfort Grip Scraper Comfort Grip Sheet/Rib Deburrer

CODE DESCRIPTION PACK QTY CODE DESCRIPTION PACK QTY
12 12
V-2-MK • Double ended V-2 blade for scraping - double edge up to VDT-MK • Sheet/rib deburrer for deburring both sides of sheet or
4mm or single edge up to 6.5mm narrow material

• New composite T-SD-MK acetal & rubber body • Supplied with replaceable V-4 blade & telescopic handle.
• Unique push-chuck holding system for easy adjustment & • New composite T-SD-MK Acetal & Rubber body
• Unique push-chuck holding system for easy adjustment &
replacement
• Takes replaceable V2 blades. replacement

Double Ended Bit

Comfort Grip Combo Scraper Multi-Fit Deburring Tool

CODE DESCRIPTION PACK QTY CODE DESCRIPTION PACK QTY
1 1
SCR-6-MK • Double ended scraper blade - triangular & Internal CT-MK • Ceramic blade provides safe deburring on plastics, metals
• New composite T-SD-MK acetal & rubber body & hardened materials
• Unique push-chuck holding system for easy adjustment &
• Supplied with C-1 replaceable Ceramic Blade.
replacement • New composite T-SD-MK acetal & rubber body
• Takes replacement SCR-6 blade. • Unique push-chuck holding system for easy adjustment &

replacement

Sheet Deburrer Set Comfort Grip Handle
CODE
DESCRIPTION PACK QTY CODE DESCRIPTION PACK QTY
1 1
SDT-SET • Excellent for deburring one or both edges of sheets / ribs T-SD-MK • Takes all telescopic holders, scrapers & ceramic blade.
• Width range of 0-12mm • New Composite T-SD-MK Acetal & Rubber body
• Sturdy ABS handle with hand protector • Unique push-chuck holding system for easy adjustment &
• Takes S-12 blades.
replacement
• Ball end screw lock provides comfort, control and security.
• Used with correct telescopic holder. Will take all ‘P’ and ‘C’

type blades

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

543