Nessco CFIS Product Catalogue 2014 WEB_reduced pages

SMART-BIT®

FASTENERS - CONSTRUCTION SCREWS

Powers SMART-BIT® - Countersinking Made Easy

POWERS SMART-BIT® is the easiest way to drill and countersink your timber in one easy process.

The Powers SMART-BIT® has a bearing-stop collar which eliminates countersinking too deep into the
timber. This gives every countersink the same depth providing a professional finish every time.
The Powers SMART-BIT® works extremely well in all hardwoods and softwoods.

Advantages Features

33 Installing the perfect countersunk FREE-SPINNING SET-SCREW
screw into decking and woodwork STOP-COLLAR ACCESS
just got smarter!

33 It’s a purpose designed pre-drilling
and countersinking tool all in one.

Installation Process ANTI-CLOG
DEBRIS
CAVITY

PRE-SET NO-MARK
COUNTERSINK RUBBER RING

POWERBOLIC®
HIGH-SPEED
STEEL DRILL BIT

Powers SMART-BIT®

PRE-DRILLING AND COUNTERSINKING ALL IN ONE

SMART-BIT® Pre-Drilling & Countersinking Tool

CODE GAUGE DRILL DIA DRILL DESCRIPTION PACK BOX
LENGTH QTY QTY

SMARTBIT-07 7 3mm #7 Gauge SMART-BIT® Tool incl 2 replacement bits 1 6
1 6
SMARTBIT-08 8 3.2mm #8 Gauge SMART-BIT® Tool incl 2 replacement bits 1 6
1 6
SMARTBIT-10 10 3.6mm 40mm #10 Gauge SMART-BIT® Tool incl 2 replacement bits 1 6

SMARTBIT-12 12 4mm #12 Gauge SMART-BIT® Tool incl 2 replacement bits

SMARTBIT-14 14 4.8mm #14 Gauge SMART-BIT® Tool incl 2 replacement bits

SMART-BIT® Replacement Bits

CODE GAUGE DRILL DIA DRILL DESCRIPTION PACK BOX
LENGTH QTY QTY
SMARTSPARE07 7 3mm 40mm Replacement Drill Bits for SMART-DRIVE® #7 Pack of 5
SMARTSPARE08 8 3.2mm 75mm Replacement Drill Bits for SMART-DRIVE® #8 Pack of 5 1 4
SMARTSPARE10 10 3.6mm Replacement Drill Bits for SMART-DRIVE® #10 Pack of 5 1 4
SMARTSPARE12 12 4mm Replacement Drill Bits for SMART-DRIVE®#12 Pack of 5 1 4
SMARTSPARE14 14 4.8mm Replacement Drill Bits for SMART-DRIVE® #14 Pack of 5 1 4
SMARTSPARE14-75 14 4.8mm Replacement Drill Bits for SMART-DRIVE® #14 Pack of 5 1 4
1 4

PAGE www.nessco.com.au

278

SMART-BIT® PRO PLUG™ SYSTEM
FASTENERS - CONSTRUCTION SCREWS

Pro Plug™ System - Drilled, Glued and Filled in 20 Seconds

Introducing the SMART-BIT® PRO PLUG™ system for wood. Never before have all the steps in
plugging been put together in a single system that delivers a perfect result, plug after plug.

This is possible with the PRO PLUG™ tool due to the fasteners, plugs and Powers’ unique PRO PLUG™
glue nozzle. All parts have been specially designed and engineered to work together for the perfect result.
The beauty of the system shines through in much faster plugging times, with half as much time spent,
if not less. If you’ve always valued the strength of top-down fastening and the finished look of plugs but
couldn’t invest the time & labour, put the SMART-BIT® PRO PLUG™ system to work today.

How many screws do I need? Features

It is sometimes difficult to work out the exact number EVEN
of screws needed per square metre. The following is a WEATHERING
rough guide with the most common boards:
33 70mm boards use approximately 70 screws/m2 The plugs weather along with
33 90mm boards use approximately 55 screws/m2 the deck, leaving a uniform
33 140mm boards use approximately 40 screws/m2 look right across the board.
These calculations are estimated on 2 screws per board
with joist spacing of 450mm. SAFE ON FEET

Installation Process There is little chance of
physical injury caused by the
installed fastener. Perfect for

high foot-traffic areas.

QUALITY FINISH

The craftsman-like finished
product makes this an exciting

wood fastening option for a
smooth, architectural appearance.

Getting ‘the look’, made simple!

Powers SMART-BIT® - Pro Plug™ System

FOR TIMBER

SMART-BIT® - PRO PLUG™ System

CODE CONTENTS PACK QTY
1
SMARTPP • 350x Merbau Plugs 1
• 100x 8Gx65mm Stainless Steel Screws
• 1x Glue Nozzle
• 1x #2 Square Drive Bit

SMARTPPDRILL SMART-BIT® PRO-PLUG™ Drill & Countersink

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

279

SCREWS 281
281
CHIPBOARD SCREWS 282
SUPER CHIPBOARD SCREWS 282
TYPE 17 SECURITY SCREWS 282
DIRECTOR SCREWS 282
EURO SCREWS 282
CEMENT SHEET SCREWS 282
HANGER BOLT LAG SCREW 283
TEE NUTS 283
PARTICLE BOARD SCREWS 284
STITCHING SCREWS 286
SELF TAPPING SCREWS
DRYWALL SCREWS

280

CHIPBOARD | SUPER CHIPBOARD
FASTENERS - SCREWS

Chipboard Screws - Self Embedding Head

CODE GAUGE TPI LENGTH DESCRIPTION COATING UNIT
Chipboard Screws Zinc Yellow 1,000
8GX20 20mm Self embedding head 1,000
COATING 1,000
8GX25 25mm Phillips drive Zinc Plated 1,000
COATING 1,000
Drive : Phillips 8GX28 28mm Galvanised 1,000
Head : Countersunk 1,000
Tip : Needle Point 8GX32 32mm COATING 1,000
Coating : Zinc Yellow Zinc Plated 1,000
8GX35 8 10 35mm 1,000
Drive : Pozi 1,000
Head : Countersunk 8GX41 41mm 1,000
Tip : Needle Point
Coating : Zinc Plated 8GX45 45mm UNIT
1,000
Drive : Phillips 8GX50 50mm 1,000
Head : Countersunk 1,000
Tip : Needle Point 8GX57 57mm 1,000
Coating : Class 3 Mechanically 1,000
10GX65 65mm 1,000
Galvanised 1,000
10GX75 10 10 75mm 1,000
Drive : Pozi 1,000
Head : Countersunk 10GX100 100mm 1,000
Tip : Needle Point 1,000
Coating : Zinc Plated Chipboard Screws - Self Embedding Head - Pozi Drive
UNIT
CODE GAUGE TPI LENGTH DESCRIPTION 1,000
Chipboard Screws 1,000
8GX20PZ 20mm Self embedding head 1,000
1,000
8GX25PZ 25mm Pozi drive 1,000
1,000
8GX28PZ 28mm 1,000
1,000
8GX32PZ 32mm 1,000
1,000
8GX35PZ 8 10 35mm 1,000
1,000
8GX41PZ 41mm
UNIT
8GX45PZ 45mm 1,000
1,000
8GX50PZ 50mm 1,000
1,000
8GX57PZ 57mm 1,000
1,000
10GX65PZ 10 10 65mm 1,000
10GX75PZ 75mm 1,000
1,000
Chipboard Screws - Self Embedding Head - Galvanised 1,000

CODE GAUGE TPI LENGTH DESCRIPTION
Chipboard Screws
8GX20GAL 20mm Self embedding head

8GX25GAL 25mm Phillips drive

8GX28GAL 28mm

8GX32GAL 32mm

8GX35GAL 8 10 35mm

8GX40GAL 40mm

8GX45GAL 45mm

8GX50GAL 50mm

8GX57GAL 57mm

10GX65GAL 65mm

10GX75GAL 10 10 75mm

10GX100GAL 100mm

Super Chipboard Screws - Drilled Head for Stem Cap

CODE GAUGE TPI LENGTH DESCRIPTION
Chipboard Screws
4.5X20SC 20mm Drilled head for stem cap

4.5X25SC 25mm

4.5X28SC 28mm

4.5X30SC 30mm

4.5X35SC 9 10 35mm
4.5X40SC 40mm

4.5X45SC 45mm

4.5X50SC 50mm

4.5X60SC 60mm

4.5X70SC 70mm

Recommended Compatible Accessories

CODE DESCRIPTION COLOUR UNIT
White 1,000
CAPWHITE White Stem Cap

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

281

T17 SECURITY | DIRECTOR | EURO | CEMENT SHEET | LAG | TEE NUTS

FASTENERS - SCREWS

Drive : Trilobular T17 Security Screws GAUGE TPI LENGTH DESCRIPTION COATING UNIT
Head : Pan CODE 10 20mm Security Screws Zinc Yellow 1,000
Tip : Self Embedding 25mm 1,000
Coating : Zinc Yellow 10GX20SEC 40mm T17 1,000
10GX25SEC
10GX40SEC

Recommended Compatible Accessories

CODE DESCRIPTION COATING UNIT
Electro-Plated 1
FZTRILOBE Trilobular Bit to suit Type 17 Security Screws

Director Screws GAUGE TPI LENGTH DESCRIPTION COATING UNIT
CODE 5 50mm Director Screws Zinc Plated 1,000
6 50mm 1,000
Drive : Phillips 5.0X50DS
Head : Drilled Recess for 6.3X50DS

Stem Cap
Tip : Confirmat Style
Coating : Zinc Plated

Euro Screws MM TPI LENGTH DESCRIPTION COATING UNIT
CODE 7mm 10mm Euro Screws Nickel Plated 1,000
7.8mm 10mm 1,000
EURO7MM
EURO7.8MM

Drive : Pozi
Head : Euro
Tip : -
Coating : Nickel Plated

Cement Sheet Screws - Self Piercing

CODE GAUGE TPI LENGTH DESCRIPTION COATING UNIT
20mm Cement Screws Self Piercing Zinc Yellow 1,000
8GX20CSSP 8 18 30mm 1,000
8GX30CSSP 18
Drive : Phillips
Head : Countersunk
Tip : Self Piercing
Coating : Zinc Yellow

Hanger Bolt Lag Screw

CODE GAUGE TPI LENGTH DESCRIPTION COATING UNIT
75mm Lag Screws Zinc Plated 1,000
LAGSCREW5/16X3 5/16”

Tee Nuts for Wood - 4 prongs

CODE DIA INNER DIA LENGTH DESCRIPTION COATING UNIT
8mm Tee Nuts for Wood Zinc Plated 1,000
BNT0316U 3/16” 8mm 1,000
1,000
BNT0608U 1/4” 16mm 1,000
10mm 1,000
BNT0516U 5/16” 1,000
7mm 1,000
BNT1011U 3/8” 16mm 8mm 1,000
BNT04MMU M4 8mm
9mm
BNT05MMU M5

BNT06MMU M6

BNT08MMU M8

PAGE www.nessco.com.au

282

PARTICLE BOARD | STITCHING
FASTENERS - SCREWS

Particle Board Screws

CODE GAUGE TPI LENGTH DESCRIPTION COATING UNIT
16mm Zinc Plated 1,000
3.0X16PB 20mm Particle Board Screws 1,000
25mm Phillips Drive 1,000
3.0X20PB 4 12mm 1,000
16mm DESCRIPTION 1,000
Drive : Phillips 3.0X25PB 20mm 1,000
Head : Countersunk 25mm Particle Board Screws 1,000
Tip : Needle Point 3.5X12PB 32mm Pozi Drive 1,000
Coating : Zinc Plated 38mm 1,000
3.5X16PB 16mm DESCRIPTION 1,000
Drive : Pozi 20mm Stitching Screws 1,000
Head : Countersunk 3.5X20PB 6 25mm 1,000
Tip : Needle Point 3.5X25PB 28mm Pan Head 1,000
Coating : Zinc Plated 32mm DESCRIPTION 1,000
3.5X32PB 35mm Stitching Screws 1,000
Drive : Phillips 40mm Button Head 1,000
Head : Pan 3.5X38PB 45mm 1,000
Tip : Needle Point 50mm 1,000
Coating : Zinc Yellow 4.0X16PB 65mm 1,000

Drive : Phillips 4.0X20PB
Head : Button
Tip : Needle Point 4.0X25PB
Coating : Zinc Yellow
4.0X28PB

4.0X32PB 8

4.0X35PB

4.0X40PB

4.0X45PB

4.0X50PB

5.0X65PB 10

Particle Board Screws - Pozi Drive

CODE GAUGE TPI LENGTH COATING UNIT
16mm Zinc Plated 1,000
3.0X16PBPZ 20mm 1,000
25mm 1,000
3.0X20PBPZ 4 12mm 1,000
16mm 1,000
3.0X25PBPZ 20mm 1,000
25mm 1,000
3.5X12PBPZ 32mm 1,000
38mm 1,000
3.5X16PBPZ 16mm 1,000
20mm 1,000
3.5X20PBPZ 6 25mm 1,000
3.5X25PBPZ 28mm 1,000
32mm 1,000
3.5X32PBPZ 35mm 1,000
40mm 1,000
3.5X38PBPZ 45mm 1,000
50mm 1,000
4.0X16PBPZ 65mm 1,000

4.0X20PBPZ

4.0X25PBPZ

4.0X28PBPZ

4.0X32PBPZ 8

4.0X35PBPZ

4.0X40PBPZ

4.0X45PBPZ

4.0X50PBPZ

5.0X65PBPZ 10

Stitching Screws - Pan Head

CODE GAUGE TPI LENGTH COATING UNIT
Zinc Yellow 1,000
7GX12PHST 12mm 1,000
1,000
7GX20PHST 20mm 1,000
1,000
7GX25PHST 7 16 25mm 1,000
7GX30PHST 30mm

7GX40PHST 40mm

7GX50PHST 50mm

Stitching Screws - Button Head

CODE GAUGE TPI LENGTH COATING UNIT
15 12mm Zinc Yellow 1,000
8GX12BH 15mm 1,000
20mm 1,000
8GX15BH 25mm 1,000
32mm 1,000
8GX20BH 8

8GX25BH

8GX32BH

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

283

SELF TAPPING

FASTENERS - SCREWS

Self Tapping Screws - Pan Head

CODE GAUGE TPI LENGTH DESCRIPTION COATING UNIT
6mm Self Tapping Screws Zinc Plated 1,000
4GX6PH 10mm 1,000
12mm Pan Head 1,000
4GX10PH 16mm 1,000
20mm 1,000
Drive : Phillips 4GX12PH 4 25mm 1,000
Head : Pan 4GX16PH 6mm 1,000
Tip : Needle Point 10mm 1,000
Coating : Zinc Plated 4GX20PH 12mm 1,000
16mm 1,000
Drive : Phillips 4GX25PH 20mm 1,000
Head : Pan 25mm 1,000
Tip : Needle Point 6GX6PH 32mm 1,000
Coating : Class 3 38mm 1,000
6GX10PH 50mm 1,000
6mm 1,000
6GX12PH 10mm 1,000
12mm 1,000
6GX16PH 16mm 1,000
20mm 1,000
6GX20PH 6 25mm 1,000
32mm 1,000
6GX25PH 38mm 1,000
45mm 1,000
6GX32PH 50mm 1,000
10mm 1,000
6GX38PH 12mm 1,000
16mm 1,000
6GX50PH 20mm 1,000
25mm 1,000
8GX6PH 32mm 1,000
38mm 1,000
8GX10PH 45mm 1,000
50mm 1,000
8GX12PH 12mm 1,000
16mm 1,000
8GX16PH 20mm 1,000
25mm 1,000
8GX20PH 8 32mm 1,000
8GX25PH 38mm 1,000
50mm 1,000
8GX32PH

8GX38PH

8GX45PH

8GX50PH

10GX10PH

10GX12PH

10GX16PH

10GX20PH

10GX25PH 10

10GX32PH

10GX38PH

10GX45PH

10GX50PH

12GX12PH

12GX16PH

12GX20PH

12GX25PH 12

12GX32PH

12GX38PH

12GX50PH

Self Tapping Screws - Pan Head - Class 3

CODE GAUGE TPI LENGTH DESCRIPTION COATING UNIT
20mm Self Tapping Screws Class 3 Galvanised 1,000
6GX20PHC3 25mm 1,000
Pan Head
6GX25PHC3 Self Tapping Screws 1,000

6GX25PHC3(BLACK) 6 25mm Pan Head Black 1,000
Self Tapping Screws
6GX25PHC3(PG) 8 25mm Pan Head Polished Grey 1,000
10 1,000
8GX12PHC3 12mm Self Tapping Screws 1,000
8GX25PHC3 25mm Pan Head
10GX25PHC3 25mm

PAGE www.nessco.com.au

284

SELF TAPPING
FASTENERS - SCREWS

Self Tapping Screws - Pan Head - Stainless Steel

CODE GAUGE TPI LENGTH DESCRIPTION MATERIAL UNIT
Self Tapping Screws Stainless Steel 1,000
4GX10PHSS 10mm 1,000
Pan Head 1,000
4GX12PHSS 12mm 1,000
1,000
Drive : Phillips 4GX16PHSS 4 16mm 1,000
Head : Pan 4GX20PHSS 20mm 1,000
Tip : Needle Point 1,000
Coating : Stainless Steel 4GX25PHSS 25mm 1,000
1,000
Drive : Phillips 6GX10PHSS 10mm 1,000
Head : Countersunk 1,000
Tip : Needle Point 6GX12PHSS 12mm 1,000
Coating : Stainless Steel 1,000
6GX16PHSS 16mm 1,000
1,000
6GX20PHSS 20mm 1,000
1,000
6GX25PHSS 25mm 1,000
1,000
6GX32PHSS 6 32mm 1,000
1,000
6GX38PHSS 38mm 1,000
1,000
8GX10PHSS 10mm 1,000
1,000
8GX12PHSS 12mm 1,000
1,000
8GX16PHSS 16mm

8GX20PHSS 20mm

8GX25PHSS 25mm

8GX32PHSS 8 32mm
8GX38PHSS 38mm

8GX45PHSS 45mm

8GX50PHSS 50mm

10GX12PHSS 12mm

10GX16PHSS 16mm

10GX20PHSS 20mm

10GX25PHSS 10 25mm

10GX32PHSS 32mm

10GX38PHSS 38mm

10GX50PHSS 50mm

Self Tapping Screws - Countersunk Head - Stainless Steel

CODE GAUGE TPI LENGTH DESCRIPTION MATERIAL UNIT
Stainless Steel 1,000
4GX10CNSS 10mm 1,000
1,000
4GX12CNSS 12mm 1,000
1,000
4GX16CNSS 4 16mm 1,000
1,000
4GX20CNSS 20mm 1,000
1,000
4GX25CNSS 25mm 1,000
1,000
6GX12CNSS 12mm 1,000
1,000
6GX16CNSS 16mm 1,000
1,000
6GX20CNSS 6 20mm 1,000
6GX25CNSS 25mm 1,000
1,000
6GX32CNSS 32mm 1,000
1,000
6GX38CNSS 38mm 1,000
1,000
8GX10CNSS 10mm 1,000
1,000
8GX12CNSS 12mm Self Tapping Screws 1,000
8GX16CNSS 16mm Countersunk Head 1,000
8GX20CNSS 20mm 1,000

8GX25CNSS 8 25mm

8GX32CNSS 32mm

8GX38CNSS 38mm

8GX45CNSS 45mm

8GX50CNSS 50mm

10GX12CNSS 12mm

10GX16CNSS 16mm

10GX20CNSS 20mm

10GX25CNSS 10 25mm

10GX32CNSS 32mm

10GX38CNSS 38mm

10GX50CNSS 50mm

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

285

SELF TAPPING | DRYWALL

FASTENERS - SCREWS

Self Tapping Screws - Countersunk Head

CODE GAUGE TPI LENGTH DESCRIPTION COATING UNIT
Self Tapping Screws 1,000
4GX10CN 10mm Countersunk Head Zinc Plated 1,000
12mm 1,000
4GX12CN 16mm COATING 1,000
20mm Zinc Yellow 1,000
Drive : Phillips 4GX16CN 4 25mm COATING 1,000
Head : Countersunk 10mm Zinc Yellow 1,000
Tip : Needle Point 4GX20CN 12mm 1,000
Coating : Zinc Plated 16mm 1,000
4GX25CN 20mm 1,000
Drive : Phillips 25mm 1,000
Head : Bugle 6GX10CN 32mm 1,000
Tip : Needle Point 38mm 1,000
Coating : Zinc Yellow 6GX12CN 50mm 1,000
10mm 1,000
Drive : Phillips 6GX16CN 12mm 1,000
Head : Bugle 16mm 1,000
Tip : Needle Point 6GX20CN 6 20mm 1,000
Coating : Zinc Yellow 6GX25CN 25mm 1,000
32mm 1,000
6GX32CN 38mm 1,000
45mm 1,000
6GX38CN 50mm 1,000
12mm 1,000
6GX50CN 16mm 1,000
20mm 1,000
8GX10CN 25mm 1,000
32mm 1,000
8GX12CN 38mm 1,000
45mm 1,000
8GX16CN 50mm 1,000
16mm 1,000
8GX20CN 20mm 1,000
25mm
8GX25CN 8 UNIT
1,000
8GX32CN 1,000
1,000
8GX38CN 1,000
1,000
8GX45CN 1,000
1,000
8GX50CN 1,000
1,000
10GX12CN 1,000
1,000
10GX16CN
UNIT
10GX20CN 1,000
1,000
10GX25CN 10 1,000
10GX32CN 1,000
1,000
10GX38CN

10GX45CN

10GX50CN

12GX16CN

12GX20CN 12

12GX25CN

Fine Drywall Screws - Bugle Head / Plaster Screws

CODE GAUGE TPI LENGTH DESCRIPTION
Fine Drywall Screws
6GX20DWF 20mm Bugle Head / Plaster Screws

6GX25DWF 6 25mm
6GX32DWF 32mm

6GX41DWF 41mm

7GX25DWF 25mm

7GX30DWF 7 30mm

7GX40DWF 40mm

8GX45DWF 45mm

8GX63DWF 8 63mm

8GX75DWF 75mm

10GX100DWF 10 100mm

Coarse Drywall Screws - Bugle Head / Plaster Screws

CODE GAUGE TPI LENGTH DESCRIPTION

6GX20DWC 6 20mm Coarse Drywall Screws
6GX25DWC 7 25mm Bugle Head / Plaster Screws
7GX25DWC 25mm
7GX30DWC 30mm

7GX40DWC 40mm

PAGE www.nessco.com.au

286

COLLATED SCREW
SYSTEMS

ABOUT MURO COLLATED SCREW SYSTEMS 289
STRIP SCREWS 290
COIL SCREWS 292
FLAT TOP SCREWS 294
BUGLE SCREWS 295

288

ABOUT MURO COLLATED SCREW SYSTEMS
FASTENERS - COLLATED SCREW SYSTEMS

MURO Collated Screws

Nessco offers the full range of MURO collated fastening systems, suitable for
many steel and timber applications. MURO provides you with with a range of
individual systems that produce quality work at an enhanced rate. Contact your
Nessco sales representative for further information and competitive pricing.

Applications

FLOOR & DECK SCREW HORIZONTAL &
FASTENING TOOL VERTICAL SCREW
FASTENING TOOL
COIL AUTO FEED
TIMBER TO METAL

FLOORING & DECKING
COIL AUTO FEED SYSTEM

Fasteners to suit all MURO systems

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

289

STRIP SCREWS

FASTENERS - COLLATED SCREW SYSTEMS

Chipboard Wood Strip Screws

CODE GAUGE LENGTH DESCRIPTION COATING UNIT
Chipboard Wood Zinc Yellow
8GX38ZYMUROST 38mm 1,000
45mm Strip Screws Class 3 1,000
Drive : Square 8GX45ZYMUROST 50mm 1,000
Head : Countersunk 65mm 1,000
Tip : Self Embedding 8GX50ZYMUROST 8 75mm 1,000
Coating : Zinc Yellow, Class 3 8GX65ZYMUROST 50mm 1,000

8GX75ZYMUROST

8GX50C3MUROST

Self Drilling Wing Fibre Cement & Flooring Strip Screws

CODE GAUGE LENGTH DESCRIPTION COATING UNIT
Class 3 1,000
8GX42WTGMUROST 8 42mm Self Drilling Class 3
Strip Screws
Drive : Square
Head : Countersunk Type 17 to Timber Strip Screws (incl Treated Pine)
Tip : Self Embedding
Coating : Class 3 CODE GAUGE LENGTH DESCRIPTION COATING UNIT
T17 Treated Pine Deck Ceramic Grey 1,000
Drive : Square 8GX50CMUROST 8 50mm 1,000
Head : Countersunk 8GX65CMUROST 65mm Strip Screws
Tip : Self Embedding
Coating : Ceramic Grey Type 17 to Timber Strip Screws (for light density compressed sheet)

Drive : Square CODE GAUGE LENGTH DESCRIPTION COATING UNIT
Head : Countersunk Ceramic Green 1,000
Tip : Self Embedding 8GX45MUROCGST 8 45mm T17 For Compressed Sheet Strip Screws
Coating : Ceramic Green
Ejector Strip Screws GAUGE LENGTH DESCRIPTION COATING UNIT
Drive : Square CODE 10 50mm Ejector Decking Class 3 1,000
Head : Countersunk 50mm 1,000
Tip : Self Embedding 10GX50C3EJMUROST 65mm Strip Screws Stainless Steel 1,000
Coating : Class 3, 10GX50SSMUROST
10GX65SSMUROST
Stainless Steel
Applications
MUROCH7390B
Collated Driver 33 SUB FLOOR
33 COMMERCIAL
33 DECKING & DOCKS
33 TRUCK & TRAILER
33 CARAVANS

*Drill and MUROCH7390C Complete Kit MURO-DECKATT
adapter not (includes MUROCH7390B, Adjustable Deck
included. handle, carry bag and pouch) Attachment
Available on MUROBIT-ST
request Square Driver Bit #2

Recommended Compatible Tools See Collated
Driver page 247
CODE DESCRIPTION UNIT
SCREW RANGE 1
MUROCH7390 Complete Kit (excludes drill) 38 - 75mm 1
38 - 75mm 1
MUROCH7390B Collated Driver only N/A 1
N/A 1
MUROHANDLE Adjustable Extension Handle N/A 1
N/A 1
MURO-DECKATT Adjustable Deck Attachment N/A

MUROBIT-ST Square Driver Bit #2 - Double Ended

MAKDRILL Makita Drill

MAKADAPT Makita Adapter

PAGE www.nessco.com.au

290

STRIP SCREWS

FASTENERS - COLLATED SCREW SYSTEMS

Chipboard Wood Strip Screws

CODE GAUGE LENGTH DESCRIPTION COATING UNIT
38mm Chipboard Wood Zinc Yellow 1,000
8GX38ZYMUROST 45mm 1,000
50mm Strip Screws Class 3 1,000
Drive : Square 8GX45ZYMUROST 8 50mm 1,000
Head : Countersunk 8GX50ZYMUROST
Tip : Self Embedding
Coating : Zinc Yellow, Class 3 8GX50C3MUROST

Self Drilling Wing Fibre Cement & Flooring Strip Screws

CODE GAUGE LENGTH DESCRIPTION COATING UNIT
Class 3 1,000
Drive : Square 8GX32WTGMUROST 8 32mm Self Drilling Class 3 1,000
Head : Countersunk 8GX42WTGMUROST 42mm Strip Screws 1,000
Tip : Self Embedding 10GX42WTGMUROST
Coating : Class 3 10 42mm

Drive : Square Type 17 to Timber Strip Screws (incl Treated Pine)
Head : Countersunk
Tip : Self Embedding CODE GAUGE LENGTH DESCRIPTION COATING UNIT
Coating : Ceramic Grey T17 Treated Pine Deck Ceramic Grey 1,000
8GX50CMUROST 8 50mm
Drive : Square Strip Screws
Head : Countersunk
Tip : Self Embedding Type 17 to Timber Strip Screws (for light density compressed sheet)
Coating : Ceramic Green
CODE GAUGE LENGTH DESCRIPTION COATING UNIT
Drive : Square Ceramic Green 1,000
Head : Countersunk 8GX45MUROCGST 8 45mm T17 For Compressed Sheet
Tip : Self Embedding Strip Screws
Coating : Class 3,
Ejector Strip Screws GAUGE LENGTH DESCRIPTION COATING UNIT
Stainless Steel CODE 10 50mm Ejector Decking Class 3 1,000
50mm 1,000
10GX50C3EJMUROST 65mm Strip Screws Stainless Steel 1,000
10GX50SSMUROST
10GX65SSMUROST MUROCH7392SF
Collated Driver
Applications
*Drill and adapter not
included. Available on request 33 SUB FLOOR
33 COMMERCIAL
33 TRUCK & TRAILER
33 CARAVANS

MUROHANDLE MUROBIT-ST
Adjustable Square Driver Bit #2
Extension Handle
See Collated
Recommended Compatible Tools Driver page 248

CODE DESCRIPTION SCREW RANGE UNIT
38 - 65mm 1
MUROCH7392SFKIT Muro 7392SF Complete Kit 38 - 65mm 1
N/A 1
MUROCH7392SF Collated Driver N/A 1
N/A 1
MUROHANDLE Adjustable Extension Handle N/A 1

MUROBIT-ST Square Driver Bit #2 - Double Ended

MAKDRILL Makita Drill

MAKADAPT Makita Adapter

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

291

COIL SCREWS

FASTENERS - COLLATED SCREW SYSTEMS

Chipboard Wood Coil Screws - Twin Thread

CODE GAUGE LENGTH DESCRIPTION COATING UNIT
Chipboard Wood Coil Screws Zinc Yellow 1,000
8GX38ZYMURO 38mm 1,000
Class 3 1,000
Drive : Square 8GX45ZYMURO 45mm 1,000
Head : Countersunk 1,000
Tip : Self Embedding 8GX50ZYMURO 8 50mm
Coating : Zinc Yellow, Class 3
8GX65ZYMURO 65mm
Drive : Square
Head : Countersunk 8GX50C3MURO 50mm
Tip : Self Drilling
Coating : Class 3 Self Drilling Wing Fibre Cement & Flooring Coil Screws

Drive : Square CODE GAUGE LENGTH DESCRIPTION COATING UNIT
Head : Countersunk Class 3 1,000
Tip : Self Embedding 8GX32WTGMURO 8 32mm 1,000
Coating : Ceramic Grey 8GX42WTGMURO 42mm 1,000
10GX42WTGMURO Self Drilling Class 3 Coil Screws 1,000
Drive : Square 10GX55WTGMURO 42mm
Head : Countersunk 10 55mm
Tip : Self Embedding
Coating : Ceramic Green Type 17 to Timber Coil Screws (incl Treated Pine)

Drive : Square CODE GAUGE LENGTH DESCRIPTION COATING UNIT
Head : Countersunk T17 Treated Pine Deck Ceramic Grey 1,000
Tip : Self Embedding 8GX50CMURO 50mm Ceramic Green 1,000
Coating : Class 3, Coil Screws Ceramic Grey 1,000
8GX50MUROCG 8 50mm
Stainless Steel
8GX65CMURO 65mm

Type 17 to Timber Coil Screws (for Light Density Compressed Sheet)

CODE GAUGE LENGTH DESCRIPTION COATING UNIT
Ceramic Green 1,000
8GX45MUROCG 8 45mm T17 For Compressed Sheet
Coil Screws

Ejector Coil Screws GAUGE LENGTH DESCRIPTION COATING UNIT
CODE 10 50mm Ejector Decking Screws Class 3 1,000
50mm 1,000
10GX50C3EJMURO 65mm Coil Screws Stainless Steel 1,000
10GX50SSEJMURO
10GX65SSEJMURO

Applications

MUROFDVL41 33 SUB FLOOR
Coil Driver Tool with Handle 33 COMMERCIAL
33 DECKING & DOCKS
33 TRUCK & TRAILER
33 CARAVANS

MUROBIT2
Square Driver Bit #2

Recommended Compatible Tools See Collated
Driver page 249
CODE DESCRIPTION UNIT
SCREW RANGE 1
MUROFDVL41 Coil Driver Tool with Handle 38 - 65mm 1
N/A 1
MUROBIT2 Square Driver Bit #2 - Double Ended N/A 1
N/A
MURO-DECKATTC Muro Coil Deck Attachment

MUROHANDLE2 Extension Handle for FL and FD Coil Tools

PAGE www.nessco.com.au

292

COIL SCREWS

FASTENERS - COLLATED SCREW SYSTEMS

Ejector Decking Coil Screws

CODE GAUGE LENGTH DESCRIPTION COATING UNIT
50mm Ejector Decking Coil Screws Ruspert 1,000
14GX50RMURO 75mm 1,000
100mm 1,000
Drive : Square 14GX75RMURO 14
Head : Countersunk
Tip : Self Embedding 14GX100RMURO
Coating : Ruspert
Ejector Decking Coil Screws (incl Treated Pine)
Drive : Square
Head : Countersunk CODE GAUGE LENGTH DESCRIPTION COATING UNIT
Tip : Self Embedding Ejector Decking Coil Screws Stainless Steel 1,000
Coating : Stainless Steel 14GX75SSMURO 14 75mm 1,000
14GX100SSMURO 100mm
Drive : Square
Head : Countersunk Self Drilling Coil Screws
Tip : Self Drilling
Coating : Class 3 CODE GAUGE LENGTH DESCRIPTION COATING UNIT
55mm Self Drilling Coil Screws Class 3 1,000
14GX55WTGMURO 14 75mm 1,000
14GX75WTGMURO

MURO FLVL41 Applications
Coil Driver Tool with Handle
33 SUB FLOOR
33 COMMERCIAL
33 DECKING & DOCKS
33 TRUCK & TRAILER
33 CARAVANS

MUROBIT3
Square Driver Bit #3

Recommended Compatible Tools See Collated
Driver page 250
CODE DESCRIPTION UNIT
SCREW RANGE 1
MUROFLVL41 Coil Driver Tool with Handle 50 - 100mm 1
N/A 1
MUROBIT-3 Square Driver Bit #3 - Double Ended N/A

MUROHANDLE2 Extension Handle for FL and FD Coil Tools

Nessco have on-road
sales representatives
and offer regional
deliveries throughout
Western Australia

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

293

FLAT TOP SCREWS

FASTENERS - COLLATED SCREW SYSTEMS

Flat Top Screws GAUGE LENGTH DESCRIPTION COATING UNIT
CODE 10 19mm Self Drilling Flat Top Screw Class 3 1,000

10GX19FTC3MURO MAKDRILL
Makita Drill
Drive : Square Applications
Head : Countersunk
Tip : Self Embedding 33 STEEL FRAME
Coating : Class 3 Galvanised 33 COMMERCIAL
33 DECKING & DOCKS
33 TRUCK & TRAILER
33 CARAVANS

MUROCH7219U-VG MUROBIT4
Steel Frame Screw Feeder Phillips Driver Bit #2

Recommended Compatible Tools See Screw
Feeder page 251
CODE DESCRIPTION UNIT
SCREW RANGE 1
MUROCH7219U-VG Muro Steel Frame Screw Feeder 19mm 1
- 1
MUROBIT4 Phillips # 2 Driver Bit - 1
-
MAKDRILL Makita Drill

MAKADAPT Makita Adapter

Screw fastening tool for
lightweight steel framing!

Powers Fasteners Australasia specialises in
a wide range of unique, innovative fastening
solutions.

• Simply load a strip of screws into the MURO Steel
Frame Screw Feeder and you are ready to start
the job.

• Save on material and labour costs with every job.
• No more dropped or lost screws.
• Adjustable depth control for repeatable

countersinking.
• Lightweight and reversible.
• Durable housing made from glass-filled

reinforced nylon.
• Nickel-plated screw guides for extended wear.
• 30 screws per strip.

PAGE www.nessco.com.au

294

BUGLE SCREWS

FASTENERS - COLLATED SCREW SYSTEMS

Collated Bugle Screws

FOR TIMBER

Collated Bugle Screws - Self Drilling

CODE GAUGE TPI LENGTH DESCRIPTION COATING DRIVE DRILL RANGE UNIT
Self Drilling Bugle Collated Screw Zinc Yellow Phillips #2 0.8 - 2.3 1,000
SDBC062025ZY 25mm 1,000
1,000
SDBC062032ZY 6 20 32mm

SDBC062041ZY 41mm

Drive : Hex
Head : Countersunk
Tip : Self Drilling
Coating : Zinc Yellow

Collated Bugle Screws - Needle Point

CODE GAUGE TPI LENGTH DESCRIPTION COATING DRIVE MINIMUM UNIT
Needle Point Bugle Collated Screw Zinc Yellow Phillips #2 EMBEDMENT
6GX25DWCOL 25mm 1,000
6GX32DWCOL 6 20 32mm 18mm 1,000
6GX41DWCOL 1,000
41mm

Drive : Hex
Head : Countersunk
Tip : Needle Point
Coating : Zinc Yellow

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

295

BOLTS & WASHERS

NESSCO BOLT & WASHER SOLUTIONS 297
BLUE-TIP SCREW-BOLT™ ANCHORS 298
TRDAC SCREW-BOLT™ ANCHORS 300
HEX HEAD BOLTS & NUTS 301
CUP HEAD BOLTS & NUTS 306
STRUCTURAL ASSEMBLIES 309
PURLIN BOLTS & NUTS 311
THREADED ROD 312
FLAT ROUND WASHERS 313
SQUARE WASHERS 313
MUNGO DECKING BOLTS 314
MASONRY SLEEVE ANCHORS 315
COMBINATION ROOF BOLTS & NUTS 316
NYLON ANCHORS 316
WALLMATES 316
WALL PLUGS 316
SPIKES 317

296

NESSCO BOLT & WASHER SOLUTIONS
FASTENERS - BOLTS & WASHERS

Nessco Fasteners’ Bolt & Washer Solutions

At Nessco we have a wide range of bolts, nuts and washers available to suit your fastener needs. Some of the products we
offer include:

• Blue Tip SCREW-BOLT™ Anchors • Cup Head Bolts • Chemical Anchors
• Structural Assemblies • High Tensile Bolts & Nuts • Sleeve Anchors
• Hex Head Bolts & Nuts • Threaded Rod • Wall Plugs
• Purlin Bolts & Nuts • Washers • Metal Pin Anchors.

For more information, contact your Nessco Sales representative.
Call our Western Australian sales office on (08) 9333 4999 or our Victorian sales office on (03) 9706 8400.

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

297

BLUE-TIP SCREW-BOLT™

FASTENERS - BOLTS & WASHERS

Blue-Tip SCREW-BOLT™ Anchor

Blue -Tip SCREW-BOLT™ anchors have many unique features and benefits that make this
innovative anchor well suited for a broad range of applications. Optimum performance is obtained
using a combination of patented design concepts.
Blue -Tip SCREW-BOLT™ anchors are one-piece fasteners featuring a finished hex head formed with an integral washer, a
patented dual-lead thread and a chamfered tip. Since there are no expansion forces, the Blue -Tip SCREW-BOLT™ anchor can
be installed closer to the edge than traditional mechanical anchors without damaging the base material.

Features

CHAMFERED TIP RATCHET TEETH
For easy centering For locking to fixture

REVERSE RELIEF GROOVES 30° HELIX ANGLE FINISHED
PARABOLIC For low installation torque, For fast installation HEX HEAD
THREADS also provides dust relief
Provide high
load capacity

Advantages

Concrete, Block, Brick Full Grip vs. Small Grip Close To Edge Installs One-Piece Design RELIEF THREAD – Low
The Blue-Tip SCREW-BOLT™ Blue-Tip SCREW-BOLT™ The Blue-Tip SCREW-BOLT™ The Blue-Tip SCREW-BOLT™ Installation Torque
anchor is versatile & can be anchors have specially anchor can be installed anchor one-piece design Allows easy tightening at a
used in a variety of base designed dual threads that closer to the edge than eliminates the possibility reduced torque level and
materials. engage the base material traditional mechanical of lost anchor parts or provides dust relief to help
immediately upon installation. anchors without damaging improper assembly. reduce jamming of the
the base material. anchor.

Removable & Reusable Vibration Resistant TIGHT-FIT – Matches Immediate High Shallow Embedment
The Blue-Tip SCREW-BOLT™ The double lead threads Standard Fixture Holes Strength loading Depth
anchor is easy to remove, grip a large portion of the The Blue-Tip SCREW-BOLT™ The Blue-Tip SCREW-BOLT™ The Blue-Tip SCREW-BOLT™
leaving a neat clean hole. embedment length and there anchor is designed to match anchor can be loaded anchor can be installed at
It can be reused in the same are no expansion forces to standard fixture clearance immediately. shallower embedment
hole after rectification or pulverize the concrete. holes that are 2mm to 3mm depths than traditional
adjustment of the fixing over nominal to provide wedge or sleeve anchors
application. a secure fit to the base reducing the chance of
material. striking reinforcing bars or
embedded cables.

PAGE www.nessco.com.au

298

BLUE-TIP SCREW-BOLT™
FASTENERS - BOLTS & WASHERS

Blue-Tip SCREW-BOLT™ Hex Head - Zinc Yellow

CODE DIA LENGTH DESCRIPTION COATING DRIVE UNIT
Zinc Yellow Hex 7mm 100
BT550 5mm 50mm Blue-Tip SCREW-BOLT™ 5mm Hex 10mm 100
100
BT6530 30mm Hex 13mm 100
100
Drive : Hex BT6550 6.5mm 50mm Blue-Tip SCREW-BOLT™ 6.5mm Hex 17mm 100
Head : Hex External BT6575 75mm 100
Coating : Zinc Yellow Hex 19mm 100
BT65100 100mm Hex 24mm 100
Drive : Hex 100
Head : Hex External BT850 50mm 100
Coating : Mechanically 100
BT860 8mm 60mm Blue-Tip SCREW-BOLT™ 8mm 100
Galvanised BT875 75mm 100
100
Drive : Hex Internal BT8100 100mm 100
Head : Countersunk 100
Coating : Zinc Yellow BT1060 60mm 100

Drive : N/A BT1075 10mm 75mm Blue-Tip SCREW-BOLT™ 10mm
Head : Eyebolt BT10100 100mm
Coating : Zinc Yellow
BT10120 120mm
(08) 9333 4999
BT1275 75mm

BT12100 12mm 100mm Blue-Tip SCREW-BOLT™ 12mm

BT12150 150mm

BT16100 16mm 100mm Blue-Tip SCREW-BOLT™ 16mm
BT16150 150mm

Blue-Tip SCREW-BOLT™ Hex Head - Mechanically Galvanised

CODE DIA LENGTH DESCRIPTION COATING DRIVE UNIT
Mechanically Hex 7mm 100
BT550G 5mm 50mm Blue-Tip SCREW-BOLT™ 5mm Galvanised Hex 10mm 100
100
BT6530G 30mm Hex 13mm 100
100
BT6550G 6.5mm 50mm Blue-Tip SCREW-BOLT™ 6.5mm Hex 17mm 100
BT6575G 75mm 100
Hex 19mm 100
BT65100G 100mm Hex 24mm 100
100
BT850G 50mm 100
100
BT860G 8mm 60mm Blue-Tip SCREW-BOLT™ 8mm 100
BT875G 75mm 100
100
BT8100G 100mm 100
100
BT1060G 60mm 100

BT1075G 10mm 75mm Blue-Tip SCREW-BOLT™ 10mm
BT10100G 100mm

BT10120G 120mm

BT1275G 75mm

BT12100G 12mm 100mm Blue-Tip SCREW-BOLT™ 12mm

BT12150G 150mm

BT16100G 16mm 100mm Blue-Tip SCREW-BOLT™ 16mm
BT16150G 150mm

Blue-Tip SCREW-BOLT™ Countersunk Head - Zinc Yellow

CODE DIA LENGTH HEAD DIA DESCRIPTION COATING DRIVE UNIT
Zinc Yellow Hex 5mm 100
BTCSK06550 6.5mm 50mm 16mm Blue-Tip SCREW-BOLT™ Hex 6mm 100
BTCSK06575 75mm Countersunk Head 6mm 100
Hex 8mm 100
BTCSK08050 8mm 50mm 20mm Blue-Tip SCREW-BOLT™ 100
BTCSK08060 60mm Countersunk Head 8mm Hex 10mm 100
BTCSK08075 75mm 100
100
BTCSK10060 10mm 60mm 24.5mm Blue-Tip SCREW-BOLT™ 100
BTCSK10075 75mm Countersunk Head 10mm 100
BTCSK10100 100mm 100

BTCSK12075 12mm 75mm 27.5mm Blue-Tip SCREW-BOLT™
BTCSK12100 100mm Countersunk Head 12mm
BTCSK12150 150mm

Blue-Tip SCREW-BOLT™ Eyebolt - Zinc Yellow

CODE DIA LENGTH INT DIA DESCRIPTION COATING DRIVE UNIT
Blue-Tip SCREW-BOLT Zinc Yellow N/A 100
BTCSK06550 6.5mm 50mm 12.7mm 100
Eyebolt 6mm 100
BTCSK08055 8mm 55mm 15.2mm Blue-Tip SCREW-BOLT™ 100

BTCSK10065 10mm 65mm 17mm Eyebolt 8mm
Blue-Tip SCREW-BOLT
BTCSK12075 12mm 75mm 21.6mm
Eyebolt 10mm
Blue-Tip SCREW-BOLT

Eyebolt 12mm

[email protected] (03) 9706 8400 [email protected] PAGE

299

TRDAC SCREW-BOLT™

FASTENERS - BOLTS & WASHERS

TRDAC SCREW-BOLT™ Anchor

The TRDAC SCREW-BOLT™ is a quick and simple system for providing timber frame top plate
tie-down to slabs for residential timber frame construction without the costly time consuming
requirements of chemical anchoring systems. Its unique thread design provides an undercutting
effect in the concrete ensuring optimum performance in residential slabs at minimal edge
distance (e.g.35mm).

TRDAC SCREW-BOLT™ Hex Head - Zinc Yellow

CODE DIA LENGTH DESCRIPTION COATING DRIVE UNIT
Zinc Yellow Hex 19mm 100
TRDAC12100 12mm 100mm TRDAC SCREW-BOLT™ 12mm 100
TRDAC12150 150mm

Drive : Hex
Head : Hex External
Coating : Zinc Yellow

Installation Procedures

Using the proper diameter bit, drill a Blow the hole clean of dust and other Insert the anchor through the fixture Installation tips:
hole into the base material to a depth material. into the anchor hole. Begin tightening Use quality hexagonal socket with a
of at least one to two anchor diameters the anchor by applying forward pressure ratchet spanner. Where substrate allows,
deeper than the embedment required. when engaging the first thread. Additional a torque controlled impact wrench can be
initial forward pressure may be required used. During installation debris or dust
for installation in high strength, dense created by the thread cutting action
base material. Continue tightening may cause some resistance to be
the anchor until the head is seated experienced. This is easily overcome by
against the fixture. In extremely dense unscrewing the TRDAC SCREW-BOLT™ for
materials, use of an impact wrench is one turn or more before continuing to fix
recommended. The installation is now to the full embedment.
complete.

PAGE www.nessco.com.au

300

HEX HEAD BOLTS & NUTS
FASTENERS - BOLTS & WASHERS

Hex Head Bolts & Nuts - Zinc Plated

CODE DIA LENGTH DESCRIPTION COATING UNIT
Hex Head Bolts & Nuts M6 Zinc Plated Zinc Plated
BH6X20 20mm 100
Hex Head Bolts & Nuts M8 Zinc Plated Zinc Plated
Head : Hex External BH6X25 25mm 100
Nut : Hex Hex Head Bolts & Nuts M10 Zinc Plated Zinc Plated
Coating : Zinc Plated BH6X30 30mm 100

BH6X35 35mm 100

BH6X40 40mm 100

BH6X45 45mm 100

BH6X50 M6 50mm 100
BH6X60 60mm
100
BH6X65 65mm
100
BH6X70 70mm
100
BH6X75 75mm
100
BH6X80 80mm
100
BH6X90 90mm
100
BH6X100 100mm
100
BH8X20 20mm
100
BH8X25 25mm
100
BH8X30 30mm
100
BH8X35 35mm
100
BH8X40 40mm
100
BH8X45 45mm
100
BH8X50 50mm
100
BH8X55 55mm
100
BH8X60 M8 60mm
BH8X65 65mm 100

BH8X70 70mm 100

BH8X75 75mm 100

BH8X80 80mm 100

BH8X90 90mm 100

BH8X100 100mm 100

BH8X120 120mm 100

BH8X130 130mm 100

BH8X150 150mm 100

BH10X20 20mm 100
BH10X25 100
BH10X30 25mm 100
BH10X35 100
BH10X40 30mm 100
BH10X50 100
BH10X60 35mm 100
BH10X70 100
BH10X80 40mm 100
BH10X90 100
BH10X100 50mm 100
BH10X110 100
BH10X120 60mm 100
BH10X130 100
BH10X140 M10 70mm 100
BH10X150 80mm 100
100
90mm

100mm

110mm

120mm

130mm

140mm

150mm

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

301

HEX HEAD BOLTS & NUTS

FASTENERS - BOLTS & WASHERS

Hex Head Bolts & Nuts - Zinc Plated

CODE DIA LENGTH DESCRIPTION COATING UNIT
Hex Head Bolts & Nuts M12 Zinc Plated Zinc Plated 100
BH12X25 25mm 100
Hex Head Bolts & Nuts M16 Zinc Plated Zinc Plated 100
Head : Hex External BH12X30 30mm Hex Head Bolts & Nuts M20 Zinc Plated Zinc Plated 100
Nut : Hex 100
Coating : Zinc Plated BH12X35 35mm 100
100
BH12X40 40mm 100
100
BH12X45 45mm 100
100
BH12X50 50mm 100
100
BH12X55 55mm 100
100
BH12X60 60mm 100
100
BH12X65 65mm 100
100
BH12X70 M12 70mm 100
100
BH12X75 75mm 100
100
BH12X80 80mm 100
100
BH12X90 90mm 100
100
BH12X100 100mm 100
100
BH12X110 110mm 100
100
BH12X120 120mm 100
100
BH12X130 130mm 100
100
BH12X140 140mm 100
100
BH12X150 150mm 100
100
BH16X25 25mm 100
100
BH16X30 30mm 100
100
BH16X35 35mm 100
100
BH16X40 40mm 100
100
BH16X45 45mm 100
100
BH16X50 50mm 100
100
BH16X55 55mm 100
100
BH16X60 60mm

BH16X65 65mm

BH16X70 M16 70mm

BH16X75 75mm

BH16X80 80mm

BH16X90 90mm

BH16X100 100mm

BH16X110 110mm

BH16X120 120mm

BH16X130 130mm

BH16X140 140mm

BH16X150 150mm

BH20X40 40mm

BH20X45 45mm

BH20X50 50mm

BH20X55 55mm

BH20X60 60mm

BH20X65 65mm

BH20X70 70mm

BH20X75 M20 75mm

BH20X80 80mm

BH20X90 90mm

BH20X100 100mm

BH20X110 110mm

BH20X120 120mm

BH20X130 130mm

BH20X150 150mm

PAGE www.nessco.com.au

302

HEX HEAD BOLTS & NUTS
FASTENERS - BOLTS & WASHERS

Hex Head Bolts & Nuts - Galvanised

CODE DIA LENGTH DESCRIPTION COATING UNIT
Hex Head Bolts & Nuts M6 Galvanised Galvanised 100
Head : Hex External BH6X20G M6 20mm Hex Head Bolts & Nuts M8 Galvanised Galvanised 100
Nut : Hex BH6X25G M8 25mm 100
Coating : Galvanised BH6X30G M10 30mm Hex Head Bolts & Nuts M10 Galvanised Galvanised 100
BH6X40G 40mm 100
BH6X50G M12 50mm Hex Head Bolts & Nuts M12 Galvanised Galvanised 100
BH6X65G M12 65mm 100
BH6X75G 75mm Hex Head Bolts & Nuts M12 Galvanised Galvanised 100
BH8X20G 20mm 100
BH8X25G 25mm 100
BH8X30G 30mm 100
BH8X35G 35mm 100
BH8X40G 40mm 100
BH8X50G 50mm 100
BH8X65G 65mm 100
BH8X75G 75mm 100
BH8X80G 80mm 100
BH8X90G 90mm 100
BH8X100G 100mm 100
BH8X120G 120mm 100
BH8X130G 130mm 100
BH8X150G 150mm 100
BH10X20G 20mm 100
BH10X25G 25mm 100
BH10X30G 30mm 100
BH10X35G 35mm 100
BH10X40G 40mm 100
BH10X50G 50mm 100
BH10X60G 60mm 100
BH10X70G 70mm 100
BH10X80G 80mm 100
BH10X90G 90mm 100
BH10X100G 100mm 100
BH10X110G 110mm 100
BH10X120G 120mm 100
BH10X130G 130mm 100
BH10X140G 140mm 100
BH10X150G 150mm 100
BH10X170G 170mm 100
BH10X180G 180mm 100
BH10X200G 200mm 100
BH10X220G 220mm 100
BH10X240G 240mm 100
BH10X260G 260mm 100
BH10X300G 300mm 100
BH12X25G 25mm 100
BH12X30G 30mm 100
BH12X35G 35mm 100
BH12X40G 40mm 100
BH12X45G 45mm 100
BH12X50G 50mm 100
BH12X55G 55mm 100
BH12X60G 60mm 100
BH12X65G 65mm 100
BH12X70G 70mm 100
BH12X75G 75mm 100
BH12X80G 80mm 100
BH12X90G 90mm 100
BH12X100G 100mm 100
BH12X110G 110mm 100
BH12X120G 120mm 100
BH12X130G 130mm 100
BH12X140G 140mm 100
BH12X150G 150mm 100
BH12X160G 160mm 100
BH12X170G 170mm 100
BH12X180G 180mm 100
BH12X200G 200mm 100
BH12X220G 220mm 100
BH12X240G 240mm 100
BH12X260G 260mm 100
BH12X280G 280mm 100
BH12X300G 300mm 100
BH12X325G 325mm 100
BH12X350G 350mm 100
BH12X400G 400mm

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

303

HEX HEAD BOLTS & NUTS

FASTENERS - BOLTS & WASHERS

Hex Head Bolts & Nuts - Galvanised

CODE DIA LENGTH DESCRIPTION COATING UNIT
Hex Head Bolts & Nuts M16 Galvanised Galvanised 100
Head : Hex External BH16X25G 25mm 100
Nut : Hex BH16X30G 30mm Hex Head Bolts & Nuts M20 Galvanised Galvanised 100
Coating : Galvanised BH16X35G 35mm Hex Head Bolts & Nuts M20 Galvanised Galvanised 100
BH16X40G 40mm 100
BH16X45G M16 45mm 100
BH16X50G M20 50mm 100
BH16X55G M20 55mm 100
BH16X60G 60mm 100
BH16X65G 65mm 100
BH16X70G 70mm 100
BH16X75G 75mm 100
BH16X80G 80mm 100
BH16X90G 90mm 100
BH16X100G 100mm 100
BH16X110G 110mm 100
BH16X120G 120mm 100
BH16X130G 130mm 100
BH16X140G 140mm 100
BH16X150G 150mm 100
BH16X160G 160mm 100
BH16X170G 170mm 100
BH16X180G 180mm 100
BH16X200G 200mm 100
BH16X220G 220mm 100
BH16X240G 240mm 100
BH16X260G 260mm 100
BH16X280G 280mm 100
BH16X300G 300mm 100
BH16X325G 325mm 100
BH16X350G 350mm 100
BH16X375G 375mm 100
BH16X400G 400mm 100
BH16X425G 425mm 100
BH16X450G 450mm 100
BH16X475G 475mm 100
BH16X500G 500mm 100
BH16X550G 550mm 100
BH16X600G 600mm 100
BH20X40G 40mm 100
BH20X45G 45mm 100
BH20X50G 50mm 100
BH20X55G 55mm 100
BH20X60G 60mm 100
BH20X65G 65mm 100
BH20X70G 70mm 100
BH20X75G 75mm 100
BH20X80G 80mm 100
BH20X85G 85mm 100
BH20X90G 90mm 100
BH20X100G 100mm 100
BH20X110G 110mm 100
BH20X120G 120mm 100
BH20X130G 130mm 100
BH20X140G 140mm 100
BH20X150G 150mm 100
BH20X160G 160mm 100
BH20X170G 170mm 100
BH20X180G 180mm 100
BH20X200G 200mm 100
BH20X220G 220mm 100
BH20X240G 240mm 100
BH20X260G 260mm 100
BH20X280G 280mm 100
BH20X300G 300mm 100
BH20X325G 325mm 100
BH20X350G 350mm 100
BH20X375G 375mm 100
BH20X400G 400mm 100
BH20X425G 425mm 100
BH20X450G 450mm 100
BH20X500G 500mm 100
BH20X550G 550mm 100
BH20X600G 600mm 100
BH20X650G 650mm 100
BH20X700G 700mm 100
BH20X750G 750mm 100
BH20X800G 800mm

PAGE www.nessco.com.au

304

HEX HEAD BOLTS & NUTS
FASTENERS - BOLTS & WASHERS

Hex Head Bolts & Nuts - Galvanised

CODE DIA LENGTH DESCRIPTION COATING UNIT
Hex Head Bolts & Nuts M24 Galvanised Galvanised 100
BH24X50G 50mm Hex Head Bolts & Nuts M36 Galvanised Galvanised 100
BH24X60G 60mm 100
BH24X65G 65mm 100
Head : Hex External BH24X70G 70mm 100
Nut : Hex BH24X75G 75mm 100
Coating : Galvanised BH24X80G 80mm 100
BH24X85G 100
BH24X90G 85mm 100
BH24X100G 90mm 100
BH24X110G 100mm 100
BH24X120G 110mm 100
BH24X130G 120mm 100
BH24X140G 130mm 100
BH24X150G 140mm 100
BH24X160G 150mm 100
BH24X170G 160mm 100
BH24X180G 170mm 100
BH24X200G 180mm 100
BH24X220G 200mm 100
BH24X240G M24 220mm 100
BH24X260G 100
BH24X280G 240mm 100
BH24X300G 260mm 100
BH24X325G 280mm 100
BH24X350G 300mm 100
BH24X375G 325mm 100
BH24X400G 350mm 100
BH24X425G 375mm 100
BH24X450G 400mm 100
BH24X500G 425mm 100
BH24X550G 450mm 100
BH24X600G 500mm 100
BH24X650G 550mm 100
BH24X700G 600mm 100
BH24X750G 650mm 100
BH24X800G 700mm 100
750mm 100
800mm 100
100
BH36X100G 100mm 100
100
BH36X130G 130mm 100
100
BH36X150G 150mm 100
100
BH36X170G 170mm 100

BH36X200G 200mm 100

BH36X220G M36 220mm
BH36X300G 300mm

BH36X400G 400mm

BH36X500G 500mm

BH36X600G 600mm

BH36X700G 700mm

BH36X800G 800mm

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

305

CUP HEAD BOLTS & NUTS

FASTENERS - BOLTS & WASHERS

Cup Head Bolts & Nuts - Zinc Plated

CODE DIA LENGTH TPI DESCRIPTION COATING UNIT
Zinc Plated 100
BC6X20 20mm 20 Zinc Plated 100
100
Head : Cup BC6X25 25mm 25 Zinc Plated 100
Nut : Hex 100
Coating : Zinc Plated BC6X30 30mm 30 Zinc Plated 100
100
BC6X40 40mm 30 100
100
BC6X50 50mm 40 100
100
BC6X60 M6 60mm 40 Cup Head Bolts & Nuts M6 Zinc Plated 100
100
BC6X65 65mm 50 100
100
BC6X75 75mm 60 100
100
BC6X80 80mm 60 100
100
BC6X90 90mm 60 100
100
BC6X100 100mm 60 100
100
BC8X20 20mm 20 100
100
BC8X25 25mm 25 100
100
BC8X30 30mm 30 100
100
BC8X40 40mm 30 100
100
BC8X45 45mm 30 100
100
BC6X50 M8 50mm 40 Cup Head Bolts & Nuts M8 Zinc Plated 100
100
BC8X65 65mm 50 100
100
BC8X75 75mm 60 100
100
BC8X80 80mm 60 100
100
BC8X90 90mm 60 100
100
BC8X100 100mm 60 100
100
BC10X20 20mm 20 100
100
BC10X25 25mm 25 100
100
BC10X30 30mm 30 100
100
BC10X40 40mm 30

BC10X50 50mm 30

BC10X60 60mm 40

BC10X65 65mm 40

BC10X70 70mm 50

BC10X75 M10 75mm 60 Cup Head Bolts & Nuts M10 Zinc Plated

BC10X90 90mm 60

BC10X100 100mm 60

BC10X110 110mm 60

BC10X120 120mm 80

BC10X130 130mm 80

BC10X140 140mm 80

BC10X150 150mm 100

BC10X160 160mm 100

BC12X40 40mm 30

BC12X50 50mm 30

BC12X65 65mm 40

BC12X70 70mm 50

BC12X75 75mm 60

BC12X90 M12 90mm 60 Cup Head Bolts & Nuts M12 Zinc Plated
BC12X100 100mm 60

BC12X120 120mm 80

BC12X130 130mm 80

BC12X150 150mm 100

BC12X180 180mm 100

BC12X200 200mm 100

PAGE www.nessco.com.au

306

CUP HEAD BOLTS & NUTS
FASTENERS - BOLTS & WASHERS

Cup Head Bolts & Nuts - Galvanised

CODE DIA LENGTH TPI DESCRIPTION COATING UNIT
Galvanised 100
BC6X20G 20mm 20 Galvanised 100
BC6X25G 25mm 25 100
BC6X30G 30mm 30 Galvanised 100
Head : Cup BC6X40G 40mm 30 100
Nut : Hex BC6X45G 45mm 30 Galvanised 100
Coating : Galvanised BC6X50G 50mm 40 100
BC6X60G M6 60mm 40 Cup Head Bolts & Nuts M6 Galvanised 100
(08) 9333 4999 BC6X65G M8 65mm 50 100
BC6X75G M10 75mm 60 100
BC6X90G 90mm 60 100
BC6X100G M12 100mm 60 100
BC6X130G 130mm 80 100
BC6X150G 150mm 80 100
BC8X20G 20mm 20 100
BC8X25G 25mm 25 100
BC8X30G 30mm 30 100
BC8X40G 40mm 30 100
BC8X45G 45mm 30 100
BC6X50G 50mm 40 100
BC8X60G 60mm 40 100
BC8X65G 65mm 50 100
BC8X75G 75mm 60 Cup Head Bolts & Nuts M8 Galvanised 100
BC8X80G 80mm 100
BC8X90G 90mm 60 100
BC8X100G 100mm 60 100
BC8X120G 120mm 60 100
BC8X130G 130mm 80 100
BC8X150G 150mm 80 100
BC8X180G 180mm 80 100
BC10X20G 20mm 100 100
BC10X25G 25mm 20 100
BC10X30G 30mm 25 100
BC10X40G 40mm 30 100
BC10X50G 50mm 30 100
BC10X60G 60mm 30 100
BC10X65G 65mm 40 100
BC10X70G 70mm 40 100
BC10X75G 75mm 50 100
BC10X90G 90mm 60 100
BC10X100G 100mm 60 100
BC10X110G 110mm 60 100
BC10X120G 120mm 60 100
BC10X130G 130mm 80 100
BC10X140G 140mm 80 Cup Head Bolts & Nuts M10 Galvanised 100
BC10X150G 150mm 100
BC10X160G 160mm 80 100
BC10X170G 170mm 100 100
BC10X180G 180mm 100 100
BC10X190G 190mm 100 100
BC10X200G 200mm 100 100
BC10X220G 220mm 100 100
BC10X240G 240mm 100 100
BC10X260G 260mm 130 100
BC10X280G 280mm 130 100
BC10X300G 300mm 130 100
BC12X30G 30mm 130 100
BC12X40G 40mm 150 100
BC12X45G 45mm 30 100
BC12X50G 50mm 30 100
BC12X65G 65mm 30 100
BC12X70G 70mm 30 100
BC12X75G 75mm 40 100
BC12X90G 90mm 50 100
BC12X100G 100mm 60 100
BC12X110G 110mm 60 100
BC12X120G 120mm 60 100
BC12X130G 130mm 60 100
BC12X140G 140mm 80 100
BC12X150G 150mm 80 Cup Head Bolts & Nuts M12 Galvanised 100
BC12X160G 160mm 80 100
BC12X170G 170mm 100 100
BC12X180G 180mm 100 100
BC12X190G 190mm 100 100
BC12X200G 200mm 100 100
BC12X220G 220mm 100 100
BC12X240G 240mm 100 100
BC12X260G 260mm 130 100
130
130

BC12X280G 280mm 130

[email protected] (03) 9706 8400 [email protected] PAGE

307

CUP HEAD BOLTS & NUTS

FASTENERS - BOLTS & WASHERS

Cup Head Bolts & Nuts - Galvanised

CODE DIA LENGTH TPI DESCRIPTION COATING UNIT
Galvanised 100
BC12X300G 300mm 150 Galvanised 100
100
Head : Cup BC12X325G 325mm 150 100
Nut : Hex 100
Coating : Galvanised BC12X350G 350mm 150 100
100
BC12X375G 375mm 150 100
100
BC12X400G 400mm 150 100
100
BC16X50G 50mm 30 100
100
BC16X65G 65mm 40 100
100
BC16X75G 75mm 60 100
100
BC16X100G 100mm 60 100
100
BC16X120G 120mm 80 100
100
BC16X130G 130mm 80 100
100
BC16X140G 140mm 80 100
100
BC16X150G 150mm 100 100
100
BC16X170G M16 170mm 100 Cup Head Bolts & Nuts M16 Galvanised 100
BC16X180G 180mm 100 100
100
BC16X200G 200mm 100 100
100
BC16X220G 220mm 130 100
100
BC16X240G 240mm 130 100
100
BC16X260G 260mm 130 100
100
BC16X280G 280mm 130 100
100
BC16X300G 300mm 150 100
100
BC16X350G 350mm 150

BC16X400G 400mm 150

BC20X65G 65mm 40

BC20X75G 75mm 60

BC20X90G 90mm 60

BC20X100G 100mm 60

BC20X120G 120mm 80

BC20X130G 130mm 80

BC20X140G 140mm 80

BC20X150G 150mm 100

BC20X180G 180mm 100

BC20X200G M20 200mm 100 Cup Head Bolts & Nuts M20 Galvanised

BC20X220G 220mm 130

BC20X240G 240mm 130

BC20X260G 260mm 130

BC20X280G 280mm 130

BC20X300G 300mm 150

BC20X350G 350mm 150

BC20X400G 400mm 150

BC20X500G 500mm 150

BC20X550G 550mm 150

PAGE www.nessco.com.au

308

STRUCTURAL ASSEMBLIES
FASTENERS - BOLTS & WASHERS

Structural Assemblies - Galvanised Australian Standards
DESCRIPTION
CODE DIA LENGTH COATING UNIT
Structural Assemblies M12 Galvanised Galvanised 100
Head : Hex External BH12X30G ST8.8 M12 30mm Galvanised 100
Nut : Hex BH12X35GST8.8 M16 35mm Structural Assemblies M16 Galvanised 100
Coating : Galvanised BH12X40GST8.8 M20 40mm Galvanised 100
BH12X45GST8.8 45mm Structural Assemblies M20 Galvanised 100
(08) 9333 4999 BH12X50GST8.8 50mm 100
BH12X60GST8.8 60mm 100
BH12X65GST8.8 65mm 100
BH12X70GST8.8 70mm 100
BH12X75GST8.8 75mm 100
BH12X80GST8.8 80mm 100
BH12X90GST8.8 90mm 100
BH12X100GST8.8 100mm 100
BH12X120GST8.8 120mm 100
BH12X150GST8.8 150mm 100
BH12X180GST8.8 180mm 100
BH12X200GST8.8 200mm 100
BH16X40GST8.8 40mm 100
BH16X45GST8.8 45mm 100
BH16X50GST8.8 50mm 100
BH16X55GST8.8 55mm 100
BH16X60GST8.8 60mm 100
BH16X65GST8.8 65mm 100
BH16X70GST8.8 70mm 100
BH16X75GST8.8 75mm 100
BH16X80GST8.8 80mm 100
BH16X90GST8.8 90mm 100
BH16X100GST8.8 100mm 100
BH16X110GST8.8 110mm 100
BH16X120GST8.8 120mm 100
BH16X130GST8.8 130mm 100
BH16X140GST8.8 140mm 100
BH16X150GST8.8 150mm 100
BH16X160GST8.8 160mm 100
BH16X170GST8.8 170mm 100
BH16X180GST8.8 180mm 100
BH16X190GST8.8 190mm 100
BH16X200GST8.8 200mm 100
BH16X220GST8.8 220mm 100
BH16X240GST8.8 240mm 100
BH16X250GST8.8 250mm 100
BH16X270GST8.8 270mm 100
BH16X300GST8.8 300mm 100
BH16X350GST8.8 350mm 100
BH16X400GST8.8 400mm 100
BH16X450GST8.8 450mm 100
BH16X500GST8.8 500mm 100
BH16X550GST8.8 550mm 100
BH16X600GST8.8 600mm 100
BH16X650GST8.8 650mm 100
BH16X700GST8.8 700mm 100
BH20X40GST8.8 40mm 100
BH20X45GST8.8 45mm 100
BH20X50GST8.8 50mm 100
BH20X55GST8.8 55mm 100
BH20X60GST8.8 60mm 100
BH20X65GST8.8 65mm 100
BH20X70GST8.8 70mm 100
BH20X75GST8.8 75mm 100
BH20X80GST8.8 80mm 100
BH20X90GST8.8 90mm 100
BH20X100GST8.8 100mm 100
BH20X110GST8.8 110mm 100
BH20X120GST8.8 120mm 100
BH20X130GST8.8 130mm 100
BH20X140GST8.8 140mm 100
BH20X150GST8.8 150mm 100
BH20X160GST8.8 160mm 100
BH20X170GST8.8 170mm 100
BH20X180GST8.8 180mm 100
BH20X190GST8.8 190mm 100
BH20X200GST8.8 200mm 100
BH20X220GST8.8 220mm 100
BH20X240GST8.8 240mm 100
BH20X250GST8.8 250mm 100
BH20X270GST8.8 270mm 100
BH20X300GST8.8 300mm 100
BH20X350GST8.8 350mm 100
BH20X400GST8.8 400mm 100
BH20X450GST8.8 450mm 100
BH20X500GST8.8 500mm

[email protected] (03) 9706 8400 [email protected] PAGE

309

STRUCTURAL ASSEMBLIES

FASTENERS - BOLTS & WASHERS

Structural Assemblies - Galvanised Australian Standards
DESCRIPTION
Head : Hex External CODE DIA LENGTH COATING UNIT
Nut : Hex BH20X550GST8.8 M20 550mm Structural Assemblies M20 Galvanised Galvanised 100
Coating : Galvanised BH20X600GST8.8 M24 600mm Structural Assemblies M24 Galvanised Galvanised 100
BH20X650GST8.8 650mm 100
BH20X700GST8.8 M24 700mm Structural Assemblies M24 Galvanised Galvanised 100
BH24X50GST8.8 100
BH24X55GST8.8 M36 50mm Structural Assemblies M36 Galvanised Galvanised 100
BH24X60GST8.8 55mm 100
BH24X65GST8.8 60mm 100
BH24X70GST8.8 65mm 100
BH24X75GST8.8 70mm 100
BH24X80GST8.8 75mm 100
BH24X90GST8.8 80mm 100
BH24X100GST8.8 90mm 100
BH24X110GST8.8 100mm 100
BH24X120GST8.8 110mm 100
BH24X130GST8.8 120mm 100
BH24X140GST8.8 130mm 100
BH24X150GST8.8 140mm 100
BH24X160GST8.8 150mm 100
BH24X170GST8.8 160mm 100
BH24X180GST8.8 170mm 100
BH24X190GST8.8 180mm 100
BH24X200GST8.8 190mm 100
BH24X220GST8.8 200mm 100
BH24X240GST8.8 220mm 100
BH24X250GST8.8 240mm 100
BH24X270GST8.8 250mm 100
BH24X300GST8.8 270mm 100
BH24X350GST8.8 300mm 100
BH24X400GST8.8 350mm 100
BH24X450GST8.8 400mm 100
BH24X500GST8.8 450mm 100
BH24X550GST8.8 500mm 100
BH24X600GST8.8 550mm 100
BH24X650GST8.8 600mm 100
BH24X700GST8.8 650mm 100
BH24X750GST8.8 700mm 100
BH36X90GST8.8 750mm 100
BH36X100GST8.8 90mm 100
BH36X110GST8.8 100mm 100
BH36X120GST8.8 110mm 100
BH36X130GST8.8 120mm 100
BH36X140GST8.8 130mm 100
BH36X150GST8.8 140mm 100
BH36X160GST8.8 150mm 100
BH36X170GST8.8 160mm 100
BH36X180GST8.8 170mm 100
BH36X190GST8.8 180mm 100
BH36X200GST8.8 190mm 100
BH36X220GST8.8 200mm 100
BH36X240GST8.8 220mm 100
BH36X260GST8.8 240mm 100
BH36X280GST8.8 260mm 100
BH36X300GST8.8 280mm 100
BH36X375GST8.8 300mm 100
BH36X400GST8.8 375mm 100
BH36X450GST8.8 400mm 100
BH36X500GST8.8 450mm 100
BH36X550GST8.8 500mm 100
BH36X600GST8.8 550mm 100
600mm

PAGE www.nessco.com.au

310

PURLIN BOLTS

FASTENERS - BOLTS & WASHERS

Flanged Purlin Bolts & Nuts

CODE DIA LENGTH DESCRIPTION COATING UNIT
30mm Purlin Hex Head Bolts & Nuts - Flange Galvanised 100
BP12X30 M12

Head : Hex External Purlin Bolts & Nuts - 2 Washers
Nut : Hex
Coating : Galvanised CODE DIA LENGTH DESCRIPTION COATING UNIT
30mm Purlin Hex Head Bolts & Nuts - 2 Washers Galvanised 100
Head : Hex External BP12X302 M12
Nut : Hex
Coating : Galvanised Purlin Bolts & Nuts - Fascia

Head : Hex External CODE DIA LENGTH DESCRIPTION COATING UNIT
Nut : Hex 30mm Purlin Hex Head Bolts & Nuts - Fascia Galvanised 100
Coating : Galvanised BP12X30F M12

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

311

THREADED ROD

FASTENERS - BOLTS & WASHERS

Threaded Rod - Zinc Plated

CODE DIA LENGTH DESCRIPTION COATING UNIT
1m Threaded Rod 1m Zinc Plated Zinc Plated 1
TROD3X1M M3 1
3m Threaded Rod 3m Zinc Plated Zinc Plated 1
TROD4X1M M4 DESCRIPTION 1
1
TROD5X1M M5 Threaded Rod 1m Galvanised 1
1
TROD6X1M M6 Threaded Rod 3m Galvanised 1
1
TROD8X1M M8 1
1
TROD10X1M M10 1
1
TROD12X1M M12 1
1
TROD16X1M M16 1
1
TROD20X1M M20 1
1
TROD24X1M M24 1
1
TROD30X1M M30 1
1
TROD36X1M M36 1

TROD42X1M M42

TROD48X1M M48

TROD56X1M M56

TROD6X3M M6

TROD8X3M M8

TROD10X3M M10

TROD12X3M M12

TROD16X3M M16

TROD20X3M M20

TROD24X3M M24

TROD30X3M M30

TROD36X3M M36

Threaded Rod - Galvanised

CODE DIA LENGTH COATING UNIT
1m Galvanised 1
TROD8X1MG M8 1
3m Galvanised 1
TROD10X1MG M10 1
1
TROD12X1MG M12 1
1
TROD16X1MG M16 1
1
TROD20X1MG M20 1
1
TROD24X1MG M24 1
1
TROD27X1MG M27 1
1
TROD30X1MG M30 1
1
TROD33X1MG M33 1
1
TROD36X1MG M36 1
1
TROD39X1MG M39 1
1
TROD42X1MG M42 1
1
TROD48X1MG M48

TROD56X1MG M56

TROD64X1MG M64

TROD8X3MG M8

TROD10X3MG M10

TROD12X3MG M12

TROD16X3MG M16

TROD20X3MG M20

TROD24X3MG M24

TROD30X3MG M30

TROD36X3MG M36

TROD42X3MG M42

TROD48X3MG M48

PAGE www.nessco.com.au

312

WASHERS

FASTENERS - BOLTS & WASHERS

Round Washers SIZE DESCRIPTION COATING UNIT
CODE M6 Round Washer M6 Galvanised 100
M8 Round Washer M8 Zinc Plated 100
BW6MMG M10 Round Washer M10 100
BW8MMG M12 Round Washer M12 100
BW10MMG M16 Round Washer M16 100
BW12MMG M20 Round Washer M20 100
BW16MMG M22 Round Washer M22 100
BW20MMG M24 Round Washer M24 100
BW22MMG M27 Round Washer M27 100
BW24MMG M30 Round Washer M30 100
BW27MMG M36 Round Washer M36 100
BW30MMG M42 Round Washer M42 100
BW36MMG M48 Round Washer M48 100
BW42MMG M56 Round Washer M56 100
BW48MMG M64 Round Washer M64 100
BW56MMG M6 Round Washer M6 100
BW64MMG M8 Round Washer M8 100
BW6MM M10 Round Washer M10 100
BW8MM M12 Round Washer M12 100
BW10MM M16 Round Washer M16 100
BW12MM M20 Round Washer M20 100
BW16MM M24 Round Washer M24 100
BW20MM M30 Round Washer M30 100
BW24MM
BW30MM

Square Washers SIZE INNER DIA LENGTH THICKNESS DESCRIPTION COATING UNIT
CODE M10 11mm 38mm Square Washer M10 Galvanised 100
3mm 100
BWSQ10X38X3G M12 13mm 50mm Square Washer M12 100
BWSQ10X50X3G 5mm 100
BWSQ10X50X5G M14 14mm 38mm 6mm Square Washer M14 100
BWSQ10X50X6G M16 17mm Square Washer M16 100
BWSQ12X38X3G M20 21mm 50mm 3mm Square Washer M20
BWSQ12X50X3G M24 25mm Square Washer M24 100
BWSQ12X50X5G 65mm 5mm
BWSQ12X50X6G 6mm 100
BWSQ12X65X5G 75mm 5mm 100
BWSQ12X65X6G 50mm 6mm 100
BWSQ12X75X5G 50mm 5mm 100
BWSQ12X75X6G 65mm 6mm 100
BWSQ14X50X3G 65mm 3mm 100
BWSQ16X50X5G 75mm 100
BWSQ16X65X5G 75mm 5mm 100
BWSQ20X65X5G 100
BWSQ20X75X6G 6mm 100
BWSQ24X75X6G 100

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

313

MUNGO BOLTS

FASTENERS - BOLTS & WASHERS

MUNGO Bolts - Zinc Hex Drive Nylon Frame Plug

CODE SIZE LENGTH DESCRIPTION TYPE COATING UNIT
Hex Zinc Plated 100
MUNGO10X60 60mm Mungo Bolts 10 x 60mm 100
100
Drive : Hex MUNGO10X80 80mm Mungo Bolts 10 x 80mm 100
Head : Hex External 100
Plug : Nylon Frame MUNGO10X100 100mm Mungo Bolts 10 x 100mm 100
Coating : Zinc Plated 100
MUNGO10X120 120mm Mungo Bolts 10 x 120mm 100
100
MUNGO10X140 10mm 140mm Mungo Bolts 10 x 140mm 100
MUNGO10X160 160mm Mungo Bolts 10 x 160mm

MUNGO10X200 200mm Mungo Bolts 10 x 200mm

MUNGO10X240 240mm Mungo Bolts 10 x 240mm

MUNGO10X280 280mm Mungo Bolts 10 x 280mm

MUNGO10X300 300mm Mungo Bolts 10 x 300mm

MUNGO Bolts - Galvanised Hex Drive Nylon Frame Plug

CODE SIZE LENGTH DESCRIPTION TYPE COATING UNIT
Hex Galvanised 100
MUNGO10X60GAL 60mm Mungo Galvanised 10 x 60mm 100
100
Drive : Hex MUNGO10X80GAL 80mm Mungo Galvanised 10 x 80mm 100
Head : Hex External 100
Plug : Nylon Frame MUNGO10X100GAL 10mm 100mm Mungo Galvanised 10 x 100mm 100
Coating : Galvanised MUNGO10X120GAL 120mm Mungo Galvanised 10 x 120mm

MUNGO10X140GAL 140mm Mungo Galvanised 10 x 140mm

MUNGO10X160GAL 160mm Mungo Galvanised 10 x 160mm

MUNGO Bolts - Zinc PZ-3 Drive Nylon Frame Plug

CODE SIZE LENGTH DESCRIPTION TYPE COATING UNIT
CSK Zinc Plated 100
MUNGO10X60CN 60mm Mungo Countersunk 10 x 60mm 100
100
MUNGO10X80CN 80mm Mungo Countersunk 10 x 80mm 100
100
Drive : PZ-3 MUNGO10X100CN 100mm Mungo Countersunk 10 x 100mm 100
Head : Countersunk 100
Plug : Nylon Frame MUNGO10X120CN 10mm 120mm Mungo Countersunk 10 x 120mm
Coating : Zinc Plated
MUNGO10X140CN 140mm Mungo Countersunk 10 x 140mm

MUNGO10X160CN 160mm Mungo Countersunk 10 x 160mm

MUNGO10X200CN 200mm Mungo Countersunk 10 x 200mm

MUNGO Bolts - Zinc T40 Torx Drive Nylon Frame Plug

CODE SIZE LENGTH DESCRIPTION TYPE COATING UNIT
CSK Zinc Plated 100
MUNGO10X80TD 80mm Mungo Torx Drive 10 x 80mm 100
N/A 100
Drive : T40 Torx MUNGO10X100TD 100mm Mungo Torx Drive 10 x 100mm 100
Head : Countersunk 100
Plug : Nylon Frame MUNGO10X120TD 10mm 120mm Mungo Torx Drive 10 x 120mm
Coating : Zinc Plated MUNGO10X140TD 140mm Mungo Torx Drive 10 x 140mm 1

MUNGO10X160TD 160mm Mungo Torx Drive 10 x 160mm

MUNGOTDDB 40mm Mungo Torx Drive Driver Bit

PAGE www.nessco.com.au

314

MASONRY ANCHORS
FASTENERS - BOLTS & WASHERS

Drive : Hex Dyna Bolts - Zinc Plated DIA LENGTH DESCRIPTION COATING UNIT
Head : Hex External CODE 6.5mm 20mm Sleeve Anchors 6.5mm Zinc Zinc Plated 100
Nut : Hex 8mm 25mm Sleeve Anchors 8mm Zinc 100
Coating : Zinc Plated DP6.5X20 35mm 100
DP6.5X25 10mm 55mm Sleeve Anchors 10mm Zinc 100
Drive : Hex DP6.5X35 75mm 100
Head : Hex External DP6.5X55 12mm 40mm Sleeve Anchors 12mm Zinc 100
Nut : Hex DP6.5X75 16mm 65mm Sleeve Anchors 16mm Zinc 100
Coating : Galvanised DP8X40 20mm 85mm Sleeve Anchors 20mm Zinc 100
DP8X65 40mm 100
Drive : Hex DP8X85 50mm DESCRIPTION 100
Head : Hex External DP10X40 60mm Sleeve Anchors 8mm Galvanised 100
Nut : Hex DP10X50 65mm Sleeve Anchors 10mm Galvanised 100
Coating : Stainless Steel DP10X60 75mm 100
DP10X75 100mm Sleeve Anchors 12mm Galvanised 100
Grade 316 DP10X95 60mm Sleeve Anchors 16mm Galvanised 100
DP10X120 75mm 100
DP12X60 100mm 100
DP12X75 130mm 100
DP12X100 65mm 100
DP12X130 110mm 100
DP16X65 145mm 100
DP16X110 75mm 100
DP16X145 105mm 100
DP20X75 150mm 100
DP20X105
DP20X150

Dyna Bolts - Galvanised DIA LENGTH COATING UNIT
CODE 8mm 40mm Galvanised 100
65mm 100
DP8X40GAL 10mm 85mm 100
DP8X65GAL 40mm 100
DP8X85GAL 12mm 50mm 100
DP10X40GAL 16mm 60mm 100
DP10X50GAL 75mm 100
DP10X60GAL 95mm 100
DP10X75GAL 60mm 100
DP10X95GAL 75mm 100
DP12X60GAL 100mm 100
DP12X75GAL 130mm 100
DP12X100GAL 65mm 100
DP12X130GAL
DP16X65GAL

Dyna Bolts - Stainless Steel

CODE DIA LENGTH DESCRIPTION COATING UNIT
35mm Sleeve Anchors 6.5mm Stainless Steel Stainless Steel 100
DP6.5X35SS 55mm Sleeve Anchors 8mm Stainless Steel 100
75mm 100
DP6.5X55SS 6.5mm 40mm Sleeve Anchors 10mm Stainless Steel 100
65mm 100
DP6.5X75SS 85mm Sleeve Anchors 12mm Stainless Steel 100
40mm 100
DP8X40SS 50mm 100
60mm 100
DP8X65SS 8mm 75mm 100
95mm 100
DP8X85SS 60mm 100
75mm 100
DP10X40SS 100mm 100

DP10X50SS

DP10X60SS 10mm

DP10X75SS

DP10X95SS

DP12X60SS

DP12X75SS 12mm

DP12X100SS

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

315

ROOF BOLTS | WALL ANCHORS | WALL PLUGS

FASTENERS - BOLTS & WASHERS

Combination Roof Bolts & Nuts

CODE DIA LENGTH DESCRIPTION COATING UNIT
¼” Roof Bolts ¼” Combination Zinc Plated 100
BR1/4X1/4 3/8” Roof Bolts 5/16” Combination Zinc Plated 100
½” 100
BR1/4X3/8 5/8” 100
¾” 100
Head : Cup BR1/4X1/2 1” 100
Nut : Hex 1¼” 100
Coating : Zinc Plated BR1/4X5/8 1½” 100
1¾” 100
BR1/4X3/4 2” 100
2½” 100
BR1/4X1 ¼” 3” 100
BR1/4X11/4 ½” 100
¾” 100
BR1/4X11/2 1¼” 100
1½” 100
BR1/4X13/4 2” 100

BR1/4X2

BR1/4X21/2

BR1/4X3

BR5/16X1/2

BR5/16X3/4

BR5/16X11/4 5/16”

BR5/16X11/2

BR5/16X2

Anchors - Nylon Nail-In Round Head

CODE DIA LENGTH DESCRIPTION COATING UNIT
Anchor Nylon Nail-In Round Head Zinc Plated 100
RN6538 6.5mm 38mm 100
RN6550 50mm Stainless Steel 100
100
RN0525SS 5mm 25mm 100

Head : Round RN6525SS 6.5mm 25mm
Coating : Zinc Plated, RN6538SS 38mm

Stainless Steel Anchors - Nylon Nail-In Mushroom Head

Head : Mushroom CODE DIA LENGTH DESCRIPTION COATING UNIT
Coating : Zinc Plated, Anchor Nylon Nail-In Mushroom Head Zinc Plated 100
MN6550 6.5mm 50mm Stainless Steel 100
Stainless Steel MN6575 75mm 100

MN6525SS 5mm 25mm

Anchors - Metal Pin DIA LENGTH DESCRIPTION COATING UNIT
CODE 6.5mm 25mm Anchor Metal Pin Zinc Plated 100
32mm 100
MPA6525
MPA6532

WallMates - Self Drilling Plasterboard Fixing

CODE DIA DESCRIPTION MATERIAL UNIT
Metal 100
WMZL 33mm Self-drilling Plasterboard Fixing 33mm 100
Nylon 100
WMZ 50mm Self-drilling Plasterboard Fixing 50mm 100

WMNY 33mm Self-drilling Plasterboard Fixing - Drill Point 33mm

WMNYSD 50mm Self-drilling Plasterboard Fixing - Drill Point 50mm

PVC Wall Plug - Framed LENGTH DESCRIPTION COLOUR QTY UNIT
CODE 38mm Wall Plug 38mm Red 25 frames x 40 1,000
50mm Wall Plug 50mm 1,000
AWPR38F 38mm Wall Plug 38mm Green plugs 1,000
AWPR50F 50mm Wall Plug 50mm 1,000
AWPG38F
AWPG50F

PAGE www.nessco.com.au

316

SPIKES

FASTENERS - BOLTS & WASHERS

Spike - Mushroom Head SIZE LENGTH DESCRIPTION COATING UNIT
CODE 5mm 38mm Spike Mushroom Head 5 x 38mm Zinc Plated 100
50mm Spike Mushroom Head 5 x 50mm 100
RD05040 COATING
RD05050 DESCRIPTION Zinc Plated UNIT
Spike Countersunk Head 6.5 x 38mm 100
Spike - Countersunk Head Spike Countersunk Head 6.5 x 50mm 100
Spike Countersunk Head 6.5 x 65mm 100
CODE SIZE LENGTH
38mm
RD065040CN 50mm
65mm
RD065050CN 6.5mm

RD065065CN

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

317

CHEMICAL ANCHORING
SYSTEMS

CHEM-STUD CAPSULES 319
CHISEL POINT STUDS 319
FLAT CUT STUDS 320
SIEVES 321
ADHESIVES 322

318

CHEM-STUD CAPSULE | CHISEL POINT STUDS
FASTENERS - CHEMICAL ANCHOR SYSTEMS

CHEM-STUD Anchor Capsule

CODE DIA DRILL DIA EMBEDMENT DESCRIPTION UNIT
80mm 8mm Glass Capsule for M8 Stud 100
M8CHEM 8mm 10mm 90mm 10mm Glass Capsule for M10 Stud 100
110mm 12mm Glass Capsule for M12 Stud 100
M10CHEM 10mm 12mm 125mm 16mm Glass Capsule for M16 Stud 100
170mm 20mm Glass Capsule for M20 Stud 100
M12CHEM 12mm 14mm 210mm 24mm Glass Capsule for M24 Stud 100

M16CHEM 16mm 18mm

M20CHEM 20mm 24/25mm

M24CHEM 24mm 28mm

STM Chisel Point Stud - Class 5.8 Zinc Yellow

CODE DIA DRILL DIA LENGTH DESCRIPTION COATING UNIT
8 x 110 with Nut & Washer Zinc Yellow 100
M8STUD 8mm 10mm 110mm 10 x 130 with Nut & Washer 100
12 x 160 with Nut & Washer 100
M10STUD 10mm 12mm 130mm 16 x 190 with Nut & Washer 100
20 x 260 with Nut & Washer 100
M12STUD 12mm 14mm 160mm 24 x 300 with Nut & Washer 100

M16STUD 16mm 18mm 190mm DESCRIPTION
8 x 110 with Nut & Washer
M20STUD 20mm 24mm 260mm 10 x 130 with Nut & Washer
12 x 160 with Nut & Washer
M24STUD 24mm 28mm 300mm 16 x 190 with Nut & Washer
20 x 260 with Nut & Washer
STM Chisel Point Stud - Galvanised 24 x 300 with Nut & Washer

CODE DIA DRILL DIA LENGTH DESCRIPTION COATING UNIT
110mm 8 x 110 with Nut & Washer Galvanised 100
M8STUDG 8mm 10mm 130mm 10 x 130 with Nut & Washer 100
160mm 12 x 160 with Nut & Washer 100
M10STUDG 10mm 12mm 190mm 16 x 190 with Nut & Washer 100
260mm 20 x 260 with Nut & Washer 100
M12STUDG 12mm 14mm 300mm 24 x 300 with Nut & Washer 100

M16STUDG 16mm 18mm

M20STUDG 20mm 24mm

M24STUDG 24mm 28mm

STM Chisel Point Stud - Stainless Steel

CODE DIA DRILL DIA LENGTH COATING UNIT
Stainless Steel 100
M8STUDSS 8mm 10mm 110mm 100
100
M10STUDSS 10mm 12mm 130mm 100
100
M12STUDSS 12mm 14mm 160mm 100

M16STUDSS 16mm 18mm 190mm

M20STUDSS 20mm 24mm 260mm

M24STUDSS 24mm 28mm 300mm

Chisel Point Stud - Capsule Procedures
THREADED ROD & REINFORCING BARS IN SOLID BASE MATERIAL.

Drill a hole to the size & Blow the hole clean with Be sure to properly balance Push the threaded rod into the Allow the adhesive to
embedment required. compressed air, brush (achieve consistent mix and hole while turning slightly to cure for the specified time
the hole & blow it clean colour) the mixing nozzle prior ensure positive distribution of prior to applying any load.
again. Holes should be to dispensing and when the adhesive. Be sure the rod is Do not disturb or load
clean and sound. They changing cartridges. Fill the fully seated at the bottom of the the anchor until it is fully
may be dry or damp, but hole approximately half way with hole and that some adhesive cured.
be free of standing water adhesive starting from the rear has flowed from the top of
or frost. of the hole. Slowly withdraw the the hole. The threaded rod or
static mixing nozzle as the hole reinforcing bar used should be
fills to avoid creating air pockets free of dirt, grease, oil, or other
within the hole. foreign material.

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

319

FLAT CUT STUDS

FASTENERS - CHEMICAL ANCHOR SYSTEMS

FCS Flat Cut Stud - Class 5.8 Zinc Yellow

CODE DIA DRILL DIA LENGTH DESCRIPTION COATING UNIT
110mm 8 x 110 Flat Cut Studs Zinc Yellow 100
M8STUDF 8mm 10mm 130mm 10 x 130 Flat Cut Studs 100
160mm 12 x 160 Flat Cut Studs 100
M10STUDF 10mm 12mm 190mm 16 x 190 Flat Cut Studs 100
260mm 20 x 260 Flat Cut Studs 100
M12STUDF 12mm 14mm 300mm 24 x 300 Flat Cut Studs 100

M16STUDF 16mm 18mm

M20STUDF 20mm 24mm

M24STUDF 24mm 28mm

FCS Flat Cut Stud - Galvanised

CODE DIA DRILL DIA LENGTH DESCRIPTION COATING UNIT
110mm 8 x 110 Flat Cut Studs Galvanised 100
M8STUDFG 8mm 10mm 130mm 10 x 130 Flat Cut Studs 100
160mm 12 x 160 Flat Cut Studs 100
M10STUDFG 10mm 12mm 190mm 16 x 190 Flat Cut Studs 100
260mm 20 x 260 Flat Cut Studs 100
M12STUDFG 12mm 14mm 300mm 24 x 300 Flat Cut Studs 100

M16STUDFG 16mm 18mm

M20STUDFG 20mm 24mm

M24STUDFG 24mm 28mm

STMRE Studs for Hollow Brick Applications - Class 5.8 Zinc Yellow

CODE DIA DRILL DIA LENGTH DESCRIPTION COATING UNIT
Zinc Yellow 100
M10110HBZY 10mm 15mm 110mm 10 x 110 Flat Cut Studs 100
100
M12110HBZY 12mm 15mm 110mm 12 x 110 Flat Cut Studs

M16125HBZY 16mm 20mm 125mm 16 x 125 Flat Cut Studs

Use with Plastic sieve or Mesh Sieve

STMRE Studs for Hollow Brick Applications - Galvanised

CODE DIA DRILL DIA LENGTH DESCRIPTION COATING UNIT
10 x 110 Flat Cut Studs Galvanised 100
M10110HBG 10mm 15mm 110mm 12 x 110 Flat Cut Studs 100
16 x 125 Flat Cut Studs 100
M12110HBG 12mm 15mm 110mm

M16STUDGSHORT 16mm 20mm 125mm

Use with Plastic sieve or Mesh Sieve

Flat Cut Stud - Installation Procedures
THREADED ROD IN HOLLOW BASE MATERIAL.

Drill a hole to the size Properly balance the Insert the filled screen Push the threaded rod Allow the adhesive to cure
and embedment for the mixing nozzle prior to tube into the anchor hole into the screen while for the specified time
required screen size. dispensing and when until it is fully seated at turning slightly to ensure prior to applying any load.
Blow the hole clean with changing cartridges. the required embedment. positive dispersement Do not disturb or load
compressed air, brush the Fill the screen tube with of the adhesive. Be sure the anchor until it is fully
hole, and blow it clean adhesive starting from the rod is fully inserted cured.
again. the rear of the screen. to the end of the screen
The screen tube should tube. The threaded rod
be filled completely prior or reinforcing bar used
to inserting it in the hole. should be free of dirt,
grease, oil, or other
foreign material.

PAGE www.nessco.com.au

320

SIEVES

FASTENERS - CHEMICAL ANCHOR SYSTEMS

Plastic Sieve

CODE DRILL DIA LENGTH SUIT DIAMETER DESCRIPTION UNIT

M8SLEEVE 12mm 50mm 8mm Plastic Sieve 8mm stud, 50mm 100

M12SLEEVE 15mm 85mm 10 / 12mm Plastic Sieve 10 or 12mm stud, 85mm 100

M12SLEEVEL 15mm 130mm 10 / 12mm Plastic Sieve 10 or 12mm stud, 130mm 100

A range of sieves designed to support adhesive during the curing process, preventing costly waste due to loss of adhesive in base
material cavities. For applications in hollow base materials such as brick, block and hollow core concrete. The Powers range of plastic
sieves provide easy anchoring in any type of hollow base material. Mesh sieves only may be cut and crimped to suit base material
configuration.

Mesh Sieve

CODE DRILL DIA LENGTH SUIT DIAMETER DESCRIPTION UNIT

MS885 12mm - 8mm Mesh Sieve 11 x 85mm 100

MS1095 16mm - 10mm Mesh Sieve 15 x 95mm 100

MS10200 16mm - 10mm Mesh Sieve 15 x 200mm 100

MS1295 18mm - 12mm Mesh Sieve 17 x 95mm 100

MS12200 18mm - 12mm Mesh Sieve 17 x 200mm 100

MS16200 22mm - 16mm Mesh Sieve 21 x 200mm 100

A range of sieves designed to support adhesive during the curing process, preventing costly waste due to loss of adhesive in base
material cavities. For applications in hollow base materials such as brick, block and hollow core concrete. The Powers range of plastic
and mesh sieves provide easy anchoring in any type of hollow base material. Only mesh sieves may be cut and crimped to suit base
material configuration. Use good quality plyers to cut and crimp mesh sieves. Fully fill with adhesive before installing sieves into
position.

One Metre Mesh Sieve

CODE DRILL DIA LENGTH SUIT DIAMETER DESCRIPTION UNIT
100
MS121000 12mm - 8mm Mesh Sieve 11 x 1,000mm 100
100
MS161000 16mm - 10 - 12mm Mesh Sieve 15 x 1,000mm

MS201000 22mm - 16mm Mesh Sieve 21 x 1,000mm

Use good quality plyers to cut and crimp mesh sieves. Fully fill with adhesive before installing sieves into position.

Retaining Cap DRILL DIA LENGTH SUIT DIAMETER DESCRIPTION UNIT
CODE 8mm - 10mm Retaining Cap 8mm 100
10mm - 12mm Retaining Cap 10mm 100
RC8 12mm - 14mm Retaining Cap 12mm 100
RC10 16mm - 18mm Retaining Cap 16mm 100
RC12 20mm - 24mm Retaining Cap 20mm 100
RC16
RC20

Flat Cut Stud - Installation Procedures
THREADED ROD & REINFORCING BARS IN SOLID BASE MATERIAL.

Drill a hole to the size and Blow the hole clean with Be sure to properly balance Thread correct retaining Push the threaded rod Allow the adhesive to
embedment required. compressed air, brush the the mixing nozzle prior cap onto stud to desired into the hole while turning cure for the specified
hole, and blow it clean to dispensing and when level, ensuring correct slightly to ensure positive time prior to applying
again. Holes should be changing cartridges. Fill the rod embedment depth. distrubution of adhesive. any load. Do not disturb
clean and sound. They hole approximately half way Be sure the rod is fully or load the anchor until
may be dry or damp, but with adhesive starting from seated at the bottom of it is fully cured.
be free of standing water the rear of the hole. Slowly the hole and that some
or frost. withdraw the static mixing adhesive has flowed from
nozzle as the hole fills to the top of the hole. The
avoid creating air pockets threaded rod or reinforcing
within the hole. bar used should be free
of dirt, grease, oil, or other
foreign material.

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

321

ADHESIVES

FASTENERS - CHEMICAL ANCHOR SYSTEMS

Powers KF2 Polyester Injection System

CODE SIZE ACCESSORIES DESCRIPTION UNIT
Polyester injection system 1
KF2 420ml 2 Nozzles
UNIT
KF2GUN CGPRO 1
Dispensing Tool 4-in-1 Multi-PRO 1

Recommended Compatible Accessories UNIT
1
CODE DESCRIPTION
UNIT
KF2GUN Dispensing Tool for KF2 & V12 1
1
CGPRO 4-in-1 Multi-PRO Delivery System
UNIT
Powers V12 All Terrain Adhesive 1

CODE SIZE TYPE DESCRIPTION UNIT
All terrain adhesive 1
V12 420ml Vynil ester Styrene-Free • High Load 1
• Less Waste
BENEFITS • Rod & Rebar • Concrete & Masonry
• Wet/Water filled holes • High chemical resistance
• Fire rated • International approvals
• Potable • Easy Open & Reseal Cap
• Fast Cure
• Low VOC

KF2GUN CGPRO
Dispensing Tool 4-in-1 Multi-PRO

Recommended Compatible Accessories

CODE DESCRIPTION

KF2GUN Dispensing Tool for KF2 & V12

CGPRO 4-in-1 Multi-PRO Delivery System

Powers Pure150Pro Epoxy

CODE SIZE ACCESSORIES DESCRIPTION
2 Mixer Nozzle extension Polyester injection system
PFPRO-385 385ml

CG585 CGPRO
Dispensing Tool 4-in-1 Multi-PRO

Recommended Compatible Accessories

CODE DESCRIPTION

CG585 Dispensing Tool for PFPRO-385

CGPRO 4-in-1 Multi-PRO Delivery System

PAGE www.nessco.com.au

322

RIVETS 325
328
ABOUT BLIND RIVETS 330
KINGSET™ AUTO-FEED RIVETING SYSTEM 330
TRUSS HEAD RIVETS 332
TRUSS HEAD RIVETS - PAINTED 334
TRUSS HEAD DOME RIVETS 335
TRUSS HEAD SEALED RIVETS 336
COUNTERSUNK HEAD RIVETS 336
TRUSS HEAD LARGE FLANGE RIVETS
TRUSS HEAD MULTIGRIP RIVETS

324

ABOUT BLIND RIVETS
FASTENERS - RIVETS

Benefits of Blind Rivets How Do Blind Rivets Work?

1. ECONOMY MANDREL/
STEM
From an in-place cost point of view, blind rivets are hard to
beat. Up to fifteen rivets per minute can be set without special The illustrations BODY/SHELL
fixturing or the use of high cost skilled labour. This makes blind on the right Jaws
rivets an inexpensive fixing solution. demonstrate the
setting stages of Nose Piece
2. VERSATILITY a common break-
mandrel type
Quick and easy to use with hand or power riveters, Nessco blind rivet.
Fasteners’ Blind Rivets have endless fastening applications
in manufacturing, maintenance and repair. Blind Rivets are Mandrel breaks
available in many different types, sizes, materials and colours.

3. QUALITY

Nessco Fasteners has an extensive quality assurance
program, including testing facilities in our Perth warehouse.
This ensures you receive a quality product you can rely on.

Identification Code System* Rivet Head Type Legends

Nessco Fasteners blind rivets are available in a number of STANDARD TYPES SPECIALISED TYPES
standard and specialised styles.
Truss head Multigrip
A S 4 - 3 CN SM no code head
MG
Colour code (if applicable)
Head code (if applicable) Large Flange Peel head
Grip code head PR
Diameter code LF Sealed head
Rivet mandrel material Countersunk S
Rivet body material head
CN

*Some specialist rivets may vary from the above code system. Please ask your Nessco sales representative for any required information.

Blind Rivet Materials

To avoid galvanic corrosion, you must select a rivet body made of a metal that is compatible with the materials being joined.
Also consider the environment that the finished product will be subjected to. Assemblies that are subjected to elevated
temperatures or corrosive atmospheric conditions demand a higher degree of fastener material compatability. As a general
rule, the rivet material should be the same as the material directly under the head of the rivet.

Material types from weakest on the left to strongest on the right, based on tensile & shear:

ALUMINIUM > STEEL > NICKEL COPPER ALLOY > STAINLESS STEEL

Rivet Body Material Coding Rivet Mandrel Material Coding

CODE MATERIAL CODE MATERIAL

A Aluminium A Aluminium

S Steel (Zinc Plated) S Steel (Zinc Plated)

M Nickel Copper Alloy (Monel) ST Stainless Steel

ST Stainless Steel

T Aluminium or Stainless Steel (Sealed)

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

325

ABOUT BLIND RIVETS

FASTENERS - RIVETS

Blind Rivet Diameters & Blind Rivets Grip Range
Recommended Hole Sizes
Refers to the total thickness of the
Most Blind Rivets are available in five diameters as listed in the intended joint. A complete list of grip range
table below. To assure proper performance, the rivet selected codes is listed below.
should be installed in the recommended hole size shown below
for the selected rivet diameter. GRIP GRIP RANGE GRIP RANGE
CODE METRIC IMPERIAL
DIAMETER BODY RECOMMENDED
CODE DIAMETER HOLE DIAMETER 1 0.5mm - 1.6mm Up to 1/16”
2 1.6mm - 3.2mm 1/16” - 1/8”
3 2.4mm (3/32”) 2.5mm 3 3.2mm - 4.8mm 1/8” - 3/16”
4 3.2mm (1/8”) 3.3mm 4 4.8mm - 6.4mm 3/16” - 1/4”
5 4.0mm (5/32”) 4.1mm 5 6.4mm - 7.9mm 1/4” - 5/16”
6 4.8mm (3/16”) 4.9mm 6 7.9mm - 9.5mm 5/16” - 3/8”
8 6.4mm (1/4”) 6.5mm 8 9.5mm - 12.7mm 3/8” - 1/2”
10 12.7mm - 15.9mm 1/2” - 5/8”
Material Compatibility* 12 15.9mm - 19.1mm 5/8” - 3/4”
14 19.1mm - 22.2mm 3/4” - 7/8”
MATERIAL  Compatible 16 22.2mm - 25.4mm
ZINC  Incompatible, 20 25.4mm - 31.8mm 7/8” - 1”
COATED ST STEEL COPPER 1” - 1-1/4”
STEEL must not be in contact
RIVET TYPE ALU- AL/AZ BRASS
MINIUM COATED ■ ■ Compatible in rural &
STEEL   
 mild environments
ALUMINIUM     (Some corrosion may
■   occur in marine/industrial
STEEL ZINC   environments. Painting both
PLATED metals will reduce reaction)

NICKEL

 COPPER

STAINLESS ■ ■
STEEL

*Above table is a guide only.

PAGE www.nessco.com.au

326

KINGSET™ AUTO-FEED RIVETING SYSTEM

FASTENERS - RIVETS

Introducing the KINGSET™ Auto-Feed Riveting System.
A REVOLUTIONARY rivet delivery system exclusive to Nessco!

Benefits COLLATED RIVETS TECHNOLOGY

33AUTO-FEED
Pre-loaded rivets on tape.

33FAST OPERATION
Reload time: 8-10 seconds. Cycle time: 2 seconds.

33EASY TO USE
One-touch cycle with adjustable vacuum.
Built-in Mandrel Collection System (MCS).

33PORTABLE
Ergonomically weight balanced to free-up one hand.

33RELIABLE
Three jaw system. Longer maintenance interval.

BUILT-IN MCS ADJUSTABLE THREE JAW AUTO-FEED
VACUUM SYSTEM

PAGE www.nessco.com.au

328

KINGSET™ AUTO-FEED RIVETING SYSTEM
FASTENERS - RIVETS

KINGSET™ by Rivet King® KINGSET™ ™ Auto-Feed Riveting Tool

KINGSET™ ™ IS A SOPHISTICATED HANDHELD CODE RK-4500K55 RK-4500K56
RIVETING SYSTEM OFFERING USERS A TRULY 28mm
UNPRECEDENTED LEVEL OF FUNCTIONALITY. WEIGHT 2.5kg

With auto-feed capabilities, KINGSET™ can literally be used to RIVETS RANGE 1/8”, 1/32”, 3/16”
set 1/8”, 5/32” and 3/16” breakstem blind rivets pre-loaded
on plastic coils. The KINGSET™ has been engineered and NOSE LENGTH 34mm
designed for different application ranges and can easily adapt
to a variety of manufacturing environments. AIR PRESSURE 85 - 100psi
The incredible flexibility of our best-in-class rivet delivery system
also provides a fast setting operation that includes rapid
reload and cycle times. The result is an immediate increase
in productivity and significant cost savings with the reduction
of in-place installation times. For even greater efficiency, an
adjustable vacuum system minimizes air consumption based
specifically on the size of the rivet being set.
The KINGSET™ is a fully portable, ergonomically balanced
tool that can be suspended either horizontally or vertically.
This combined with a highly engineered, one-touch operation
allows users to set rivets automatically while leaving one
hand free to hold work pieces in place. Additionally, a built-in
Mandrel Collection System (MCS) helps ensure work place
safety and cleanliness.
Perfect for mid-range to high volume applications, the
KINGSET™ provides a strong, reliable joint while streamlining
the assembly process of jobs including steel wall frames,
automotive products, electronic chassis, HVAC and other sheet
metal fabrications.

VISIT NESSCO.COM.AU TO SEE THE KINGSET™
IN ACTION!

Technical Diagrams

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

329

TRUSS HEAD RIVETS - PLAIN & PAINTED

FASTENERS - RIVETS

Truss Head Rivets

ALUMINIUM / STEEL

CODE BODY MANDREL BODY GRIP RECC. BODY CLEAR- HEAD UNIT
Aluminium Steel DIA RANGE HOLE DIA LENGTH ANCE DIA
AS3-2 2.5mm 1,000
AS3-4 2.4mm 1.6 - 3.2mm 3.3mm 6.15mm 8.15mm 5.0mm 1,000
AS4-1 (3/32”) 4.8 - 6.4mm 9.45mm 11.45mm 6.2mm 1,000
AS4-2 3.2mm Up to 1.6mm 4.1mm 5.15mm 1,000
AS4-3 (1/8”) 1.6 - 3.2mm 6.85mm 7.40mm 8.2mm 1,000
AS4-4 3.2 - 4.8mm 4.9mm 8.35mm 9.10mm 1,000
AS4-5 4.0mm 4.8 - 6.4mm 9.95mm 10.60mm 9.4mm 1,000
AS4-6 (5/32”) 6.4 - 7.9mm 11.55mm 12.20mm 1,000
AS4-8 7.9 - 9.5mm 13.45mm 13.80mm 1,000
AS4-10 4.8mm 9.5 - 12.7mm 16.85mm 15.70mm 1,000
AS4-12 (3/16”) 12.7 - 15.9mm 20.25mm 19.10mm 500
AS5-2 15.9 - 19mm 23.30mm 22.50mm 1,000
AS5-3 1.6 - 3.2mm 7.45mm 25.55mm 1,000
AS5-4 3.2 - 4.8mm 9.05mm 10.20mm 1,000
AS5-5 4.8 - 6.4mm 10.55mm 11.80mm 500
AS5-6 6.4 - 7.9mm 12.02mm 13.30mm 500
AS5-8 7.9 - 9.5mm 13.75mm 14.80mm 500
AS5-10 9.5 - 12.7mm 17.45mm 16.50mm 500
AS6-2 12.7 - 15.9mm 20.65mm 20.20mm 500
AS6-3 1.6 - 3.2mm 8.05mm 23.40mm 500
AS6-4 3.2 - 4.8mm 9.65mm 11.05mm 500
AS6-5 4.8 - 6.4mm 11.25mm 12.65mm 500
AS6-6 6.4 - 7.9mm 12.85mm 14.25mm 500
AS6-8 7.9 - 9.5mm 14.45mm 15.85mm 500
AS6-10 9.5 - 12.7mm 17.55mm 17.45mm 500
AS6-12 12.7 - 15.9mm 21.45mm 20.55mm 250
AS6-14 15.9 - 19mm 24.65mm 24.45mm 250
AS6-16 19 - 22.2mm 27.95mm 27.65mm 250
22.2 - 25.4mm 31.25mm 30.95mm
34.25mm

Truss Head Rivets - Painted

ALUMINIUM / STEEL 4-3

CODE BODY MANDREL BODY GRIP RECC. BODY CLEAR- HEAD COLOUR UNIT
Aluminium Steel DIA RANGE HOLE DIA LENGTH ANCE DIA
AS4-3BR 3.3mm 8.35mm Blue Ridge 1,000
AS4-3BU 3.2mm 3.2 - 4.8mm 10.6mm 6.2mm Bushland 1,000
AS4-3CC (1/8”) Classic Cream 1,000
AS4-3CG Cottage Green 1,000
AS4-3DO Deep Ocean 1,000
AS4-3DU 1,000
AS4-3EH Dune 1,000
AS4-3HE Evening Haze 1,000
AS4-3IS 1,000
AS4-3JA Headland 1,000
AS4-3LO Ironstone 1,000
AS4-3MO 1,000
AS4-3MR Jasper 1,000
AS4-3NS Loft 1,000
AS4-3PA 1,000
AS4-3PE Monument 1,000
AS4-3PL Manor Red 1,000
AS4-3PR Night Sky 1,000
AS4-3SA Paperbark 1,000
AS4-3SG Pale Eucalypt 1,000
AS4-3SM Plantation 1,000
AS4-3ST Primrose 1,000
AS4-3WG Sandbank 1,000
AS4-3WH Shale Grey 1,000
AS4-3WHT 1,000
AS4-3WI Surfmist 1,000
AS4-3WS Stone 1,000

Woodland Grey
Wheat
White

Wilderness
Windspray

PAGE www.nessco.com.au

330