Nessco CFIS Product Catalogue 2014 WEB_reduced pages

GRINDERS

AIRTOOLS - TRAX KAWASAKI

Kawasaki Mini Die Grinder (Japan) Kawasaki Mini Die Grinder Kit (Japan)

CODE KPT-22DG LENGTH 75mm CODE KPT-22DGK
EXHAUST Front
FREE SPEED 21000rpm 1 x KPT-22DG, 4 x 1/4” Shaft mounted points (stones)
4 x 1/8” Mounted points (stones)
COLLET 1/4” Standard CONTENTS 1 x 1/8” and 1/4” collets supplied (3mm & 6mm available)
(1/8”, 3mm and 6mm 1 x Set chuck spanners,
also available) 1 x Foam locating inserts

INLET 1/4”

WEIGHT 0.68kg

TRAX 900 Die Grinder TRAX Gasket Removal Re-finishing Kit

CODE ARX-114AN LENGTH 157mm CODE ARX-114HRK
EXHAUST Front
FREE SPEED 25000rpm 1 x ARX-114AN with 1/4” collet
1 x ARX-2SPR 2” Rubber backing pad (rollok type)
COLLET 1/4” Standard CONTENTS 7 x ARX-2SCDR#80 2” #80 Grit conditioning Pads
(1/8”, 3mm and 6mm 2 x ARX-2SCDR#120 2” #120 Grit conditioning Pads
also available)
Tool specifications same as the ARX-114AN above. Neatly presented in a yellow plastic
INLET 1/4” case and foam insert. Designed by TRAX Tools to finalise and prepare for gasket
replacement.
WEIGHT 0.51kg

TRAX 1200 Angle Head Die Grinder TRAX 1200 Angle Head Die Grinder Kit

CODE ARX-1120AH LENGTH 90mm CODE ARX-1120AHK
EXHAUST Rear
FREE SPEED 25000rpm 1 x ARX-1120AH Tool 1 x 3” Conditioning Disc
HEAD OFFSET 75mm 1 x 2” Backing Pad 1 x 2” Sanding Disc
1/4” Standard CONTENTS 1 x 3” Backing Pad 1 x 3” Sanding Disc
COLLET (1/8”, 3mm and 6mm 1 x 2” Conditioning Disc 1 x 1/8” Collet
also available)
1 x Metal Case 1 x Foam Locating Insert
INLET 1/4”
Tool specifications same as the ARX-1120AH. This kit has been compiled by TRAX-
WEIGHT 0.5kg Kawasaki tools to fill a void in the die grinder kit supply.

PAGE www.nessco.com.au

136

GRINDERS

AIRTOOLS - TRAX KAWASAKI

TRAX Extended Die Grinder TRAX Extended Die Grinder Kit

CODE ARX-132NE LENGTH 265mm CODE ARX-132NEK

FREE SPEED 25000rpm 1/8” and 1/4” collets,
9 x mounted points (Stones)
COLLET 1/4” Standard CONTENTS Spanner set,
(1/8”, 3mm and 6mm Location insert
also available) Metal case

INLET 1/4” Tool Specs same as ARX-132NE. Unique to TRAX~Kawasaki.

WEIGHT 0.65kg

Kawasaki Micro Die Grinder (Japan) TRAX Sanding Drum Kit

CODE KPT-PG3 LENGTH 135mm CODE ARX-111SDK
Front
FREE SPEED 55000rpm EXHAUST 1 x ARX-111, 1/8” and 1/4” collets,
1 each expanding arbors 1/2”, 3/4”, 1” and 1 ½”
COLLET 3mm Standard CONTENTS 4 each abrasive drums 1/2”, 3/4”, 1” and 1 ½”
1 set of chuck spanners
INLET 1/4”

WEIGHT 0.11kg All replacement abrasive pads available. Unique to TRAX-Kawasaki.

TRAX Micro Die Grinder Kit Kawasaki Industrial Die Grinder

CODE ARX-110K LENGTH 155mm CODE KPT-NG65A-CS LENGTH 160mm
THROTTLE Safety lever type
FREE SPEED 56000rpm FREE SPEED 20000rpm

COLLET 1/8” Standard COLLET 6mm

INLET 1/4” INLET 3/8”

WEIGHT 0.68kg WEIGHT 0.80kg

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

137

GRINDERS

AIRTOOLS - TRAX KAWASAKI

Kawasaki Industrial Die Grinder Kawasaki Industrial Die Grinder (Japan)

CODE KPT-NG65A-CR LENGTH 305mm CODE KPT-NG75A-CR LENGTH 330mm
THROTTLE Roll type Roll type
FREE SPEED 16000rpm FREE SPEED 15000rpm THROTTLE

COLLET 6mm COLLET 6mm

INLET 3/8” INLET 3/8”

WEIGHT 1.2kg WEIGHT 1.5kg

Kawasaki Industrial Die Grinder (Japan) Kawasaki Industrial Die Grinder

CODE KPT-NG75A-CS LENGTH 370mm CODE KPT-NG65L-CR LENGTH 370mm
Safety lever type THROTTLE Roll type
FREE SPEED 15000rpm THROTTLE FREE SPEED 15000rpm

COLLET 6mm COLLET 6mm

INLET 3/8” INLET 3/8”

WEIGHT 1.3kg WEIGHT 0.80kg

Kawasaki Industrial Die Grinder

CODE KPT-NG75L-CS LENGTH 515mm
THROTTLE Safety lever type
FREE SPEED 15000rpm

COLLET 6mm

INLET 3/8”

WEIGHT 0.80kg

PAGE www.nessco.com.au

138

GRINDERS

AIRTOOLS - TRAX KAWASAKI

Kawasaki Industrial Die Grinder TRAX 3" Disc Grinder

CODE KPT-NG75L-CR LENGTH 515mm CODE ARX-135 LENGTH 160mm
THROTTLE Roll type THROTTLE Safety lever type
FREE SPEED 15000rpm FREE SPEED 20000rpm

COLLET 6mm COLLET 3/8”

INLET 3/8” INLET 3/8”

WEIGHT 0.80kg WEIGHT 0.8kg

Kawasaki 3" Industrial Barrel Grinder Kawasaki 3" Industrial Barrel Grinder

CODE KPT-NG75A-DS LENGTH 295mm CODE KPT-NG75A-DR LENGTH 295mm
Safety lever type Roll type
FREE SPEED 16000rpm THROTTLE FREE SPEED 15000rpm THROTTLE

COLLET 3/8” x 16TPI COLLET 3/8” x 16TPI

INLET 3/8” INLET 3/8”

WEIGHT 1.6kg WEIGHT 1.6kg

Kawasaki 5" Industrial Barrel Grinder Kawasaki 5" Industrial Barrel Grinder (with Governor)

CODE KPT-NG125A-DS LENGTH 390mm CODE KPT-NG125A-DSG LENGTH 390mm
Safety lever type
FREE SPEED 13000rpm THROTTLE FREE SPEED 7200rpm THROTTLE Safety lever type

COLLET 1/2” x 12TPI COLLET 1/2” x 12TPI

INLET 1/2” INLET 1/2”

WEIGHT 3kg WEIGHT 3kg

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

139

GRINDERS

AIRTOOLS - TRAX KAWASAKI

Kawasaki 3" Industrial Grinder (Japan) Kawasaki 5" Industrial Grinder (with Governor)

CODE KPT-NG65A-DR LENGTH 390mm CODE KPT-NG125A-DRG LENGTH 390mm
Roll type Roll type
FREE SPEED 13000rpm THROTTLE FREE SPEED 7200rpm THROTTLE

COLLET 1/2” x 12TPI COLLET 12” x 12 TPI

INLET 1/2” INLET 3/8”

WEIGHT 3kg WEIGHT 3kg

Kawasaki 6" Industrial Grinder Kawasaki 6" Industrial Grinder (with Governor)

CODE KPT-NG150A-DS LENGTH 445mm CODE KPT-NG150A-DSG LENGTH 445mm
THROTTLE Safety lever type Safety lever type
FREE SPEED 10000rpm FREE SPEED 6000rpm THROTTLE

COLLET 5/8” x 11 TPI COLLET 5/8” x 11 TPI

INLET 1/2” INLET 1/2”

WEIGHT 4.7kg WEIGHT 4.7kg

Kawasaki 6" Industrial Grinder TRAX 3" Cut-Off Tool

CODE KPT-NG150A-DR LENGTH 160mm CODE ARX-135 WEIGHT 0.75kg
THROTTLE Roll type LENGTH 190mm
FREE SPEED 20000rpm FREE SPEED 18000rpm PRESSURE 90psi

COLLET 5/8” x 12 TPI PAD DIA -

INLET 3/8” SPINDLE -

WEIGHT 0.8kg INLET 1/4”

PAGE www.nessco.com.au

140

GRINDERS

AIRTOOLS - TRAX KAWASAKI

TRAX 2" Mini Angle Grinder TRAX 4" Angle Grinder

CODE ARX-368AG WEIGHT 0.57kg CODE ARX-832L WEIGHT 1.7kg
LENGTH 175mm LENGTH 250mm (incl disc)
FREE SPEED 15000rpm PRESSURE 90psi FREE SPEED 10000rpm AIR CONS 10 l/s

PAD DIA 2” PAD DIA 4” 100mm

SPINDLE 1/4” x 20TPI SPINDLE 3/8” x 24TPI

INLET 1/4” INLET 1/4”

Kawasaki 4" Angle Grinder TRAX 4" Angle Grinder (with Rear Roll Throttle Control)

CODE KPT-100A WEIGHT 1.7kg CODE ARX-832R WEIGHT 1.7kg
LENGTH 250mm (incl disc)
FREE SPEED 12000rpm AIR CONS 10 l/s FREE SPEED 10000rpm LENGTH 250mm (incl disc)

PAD DIA 4” 100mm PAD DIA 4” 100mm AIR CONS 10 l/s

SPINDLE 3/8” x 24TPI SPINDLE 3/8” x 24TPI

INLET 1/4” INLET 1/4”

TRAX 5" Angle Grinder TRAX 7" Angle Grinder

CODE ARX-835L WEIGHT 1.82kg CODE ARX-831L WEIGHT 3.25kg
LENGTH 300mm LENGTH 390mm (incl disc)
FREE SPEED 7000rpm COMPRESSOR 22 cfm FREE SPEED 7000rpm COMPRESSOR 22 cfm
CONSUMPTION 11 l/s CONSUMPTION 11 l/s
DISC DIA 5” | 125mm HOSE 10mm (min) DISC DIA 7” | 180mm HOSE 13mm (min)

SPINDLE 14mm SPINDLE 5/8” x 11TPI

INLET 1/4” INLET 3/8”

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

141

GRINDERS

AIRTOOLS - TRAX KAWASAKI

Kawasaki 5" Angle Grinder (Japan) Kawasaki 7" Angle Grinder (Japan)

CODE KPT-125A WEIGHT 1.7kg CODE KPT-184 WEIGHT 3.5kg
LENGTH 229mm LENGTH 320mm
FREE SPEED 11000rpm AIR CONS 11 l/s FREE SPEED 7500rpm

DISC DIA 5” | 125mm DISC DIA 7” | 180mm

SPINDLE 22mm 7/8” SPINDLE 22mm 7/8”

INLET 1/4” INLET 3/8”

PAGE www.nessco.com.au

142

SANDERS

AIRTOOLS - TRAX KAWASAKI

TRAX 10mm Belt Sander/Linisher TRAX 20mm Belt Sander/Linisher

CODE ARX-123H LENGTH 280mm CODE ARX-125H LENGTH 345mm

FREE SPEED 16000rpm FREE SPEED 12000rpm

BELT 10 x 300mm BELT 20 x 520mm

BELT GRIT Supplied with 80 Grit BELT GRIT Supplied with 80 Grit
(#120 available) (#120 available)

WEIGHT 0.8kg WEIGHT 1.18kg

Kawasaki Professional 20mm Belt Sander/Linisher (Japan) Kawasaki 7” Disc Sander (Japan)

CODE KPT-520 LENGTH 380mm CODE ARX-829 COMPRESSOR 17 cfm

FREE SPEED 11500rpm FREE SPEED 4800rpm

BELT 20 x 520mm PAD DIA 7” 175mm

BELT GRIT Supplied with 80 Grit SPINDLE 5/8” 11TPI INC
(#120 available)
INLET 1/4”
WEIGHT 1.4kg

TRAX Jitter Bug Sander Kawasaki Jitter Bug Sander (Japan)

CODE ARX-467 WEIGHT 2.6kg CODE KPT-45S WEIGHT 2.1kg
LENGTH 180mm 190mm
FREE SPEED 8500rpm PRESSURE 95 psi FREE SPEED 11000rpm LENGTH 90-100 psi

PAD DIA 90 x 170mm PAD DIA 90 x 170mm PRESSURE

ORBIT 4.5mm SPINDLE 5.5mm

INLET 1/4” INLET 1/4”

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

143

SANDERS

AIRTOOLS - TRAX KAWASAKI

Kawasaki 3mm Wet Finishing Sander (Japan) TRAX Pro & Ergonomic 50mm Angle Sander

CODE KPT-178 WEIGHT 0.95kg CODE ARX-AS368 WEIGHT 0.57kg
180mm 175mm
FREE SPEED 11000rpm LENGTH 95-105 psi FREE SPEED 15000opm LENGTH 90-100 psi

PAD SIZE 73 x 140mm PRESSURE PAD SIZE 2” PRESSURE

ORBIT 3mm ORBIT -

INLET 1/4” INLET -

TRAX Gasket Removal Re-finishing Kit TRAX Sanding Conditioning Kit

CODE ARX-114HRK CODE ARX-608K

CONTENT 1 x ARX-114AN with 1/4” Collet, 1 x ARX-608 Hi-speed sanding
1 x ARX-2SPR 2” Rubber backing pad (Rollok type) 1 x ARX-2SPR 2” Backing pad
7 x ARX-2SCDR#80 2” #80 Grit conditioning Pads CONTENT 1 x ARX-3SPR 3” Rubber backing pad
2 x ARX-2SCDR#120 2” #120 Grit conditioning Pads 3 x 2” (50 mm) Conditioning abrasive pads
3 x 2” (50 mm) Sanding pads
3 x 3” (75 mm) Conditioning abrasive pads
3 x 3” (75 mm) Sanding pads

TRAX Hi-Speed Sander/Polisher TRAX Sanding Drum Kit

CODE ARX-608-1 WEIGHT 0.85kg CODE ARX-111SDK
LENGTH 110mm
FREE SPEED 15000rpm 1 x ARX-111
1/8” and 1/4” collet
SPINDLE 3/8” 24 TPI CONTENT 1 each expanding arbors 1/2”, 3/4”, 1” and 1 1/2”
4 each abrasive drums 1/2”, 3/4”, 1” and 1 1/2”
ORBIT - 1 set of chuck spanners

INLET -

PAGE www.nessco.com.au

144

SANDERS

AIRTOOLS - TRAX KAWASAKI

TRAX 6" - 150mm Rotary Orbital Sander Kawasaki 6" - 150mm Rotary Orbital Sander

CODE ARX-466N WEIGHT 2.05kg CODE KPT-43L WEIGHT 2kg
230mm 230mm
FREE SPEED 9500rpm LENGTH 95+ psi FREE SPEED 10000rpm LENGTH 90-100 psi

PAD SIZE 6” - 150mm PRESSURE PAD SIZE 6” - 150mm PRESSURE

ORBIT 5mm ORBIT 5.5mm

INLET 1/4” INLET 1/4”

Kawasaki 6" - 150mm Rotary Orbital Sander Kawasaki Professional 6" - 150mm Sander

CODE ARX-301 WEIGHT 1.2kg CODE KPT-166DA-6MP WEIGHT 0.98kg
ARX-301D (DUST FREE) 158mm
155mm FREE SPEED 9200rpm LENGTH 95-110 psi
FREE SPEED 9200rpm LENGTH 95-110 psi
PAD SIZE 6” - 150mm PRESSURE
PAD SIZE 6” - 150mm PRESSURE
OSCILLATION 5mm
OSCILLATION 5.1mm
INLET -
INLET -

TRAX Hi-Speed Orbital Finishing Sander TRAX Speed File Double Piston Type Sander

CODE ARX-430 WEIGHT 0.95kg CODE ARX-468 WEIGHT 2.67kg
130mm 420mm
FREE SPEED 20000rpm LENGTH Double spring clips STROKE 26mm LENGTH 90-100 psi

PAD SIZE 100 x 100mm PAPER FIXING PAD SIZE 65 x 400mm PRESSURE

ORBIT 0.5mm FIXING Double Clip

INLET - INLET 1/4”

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

145

SANDERS

AIRTOOLS - TRAX KAWASAKI

Kawasaki 1/3 Sheet Dust Free Sander

CODE KPT-97 WEIGHT 2.3kg
295mm
ORBIT 5mm LENGTH 90-100 psi

PAD SIZE 112 x 220mm PRESSURE

FIXING Double Clp

INLET 1/4”

PAGE www.nessco.com.au

146

SAND RAMMERS
AIRTOOLS - TRAX KAWASAKI

Kawasaki Sand Rammer 18mm Kawasaki Sand Rammer 18mm Kit

CODE KPT-1 LENGTH 340mm CODE KPT-1L LENGTH 990mm
PAD DIA 42mm 42mm
STROKE 50mm STROKE 50mm PAD DIA

PISTON DIA 18mm PISTON DIA 18mm

BLOWS 1800 per min BLOWS 1800 per min

WEIGHT 2kg WEIGHT 3kg

Kawasaki Sand Rammer 22mm Kawasaki Sand Rammer 22mm Kit

CODE KPT-2 LENGTH 460mm CODE KPT-2L LENGTH 990mm
PAD DIA 50mm 50mm
STROKE 65mm STROKE 65mm PAD DIA

PISTON DIA 22mm PISTON DIA 22mm

BLOWS 1000 per min BLOWS 1800 per min

WEIGHT 3kg WEIGHT 4kg

Kawasaki Sand Rammer 1" Kawasaki Sand Rammer 1"

CODE KPT-3 LENGTH 620mm CODE KPT-4 LENGTH 1165mm
PAD DIA 65mm PAD DIA 65mm
STROKE 100mm STROKE 100mm

PISTON DIA 25.4mm PISTON DIA 25.4mm

BLOWS 800 per min BLOWS 800 per min

WEIGHT 6kg WEIGHT 8kg

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

147

CHISELS & SCALERS

AIRTOOLS - TRAX KAWASAKI

TRAX Light Duty Air Chisel TRAX Light Duty Air Chisel Kit

CODE ARX-275 LENGTH 165mm CODE ARX-275K
PRESSURE 95-110 psi
CHISEL SHK Round 5 x Chisel bits
1 x ARX-275
SHANK DIA 10mm CONTENTS 1 x Retainer spring
1 x Quick release chuck
BLOW/MIN 2950 Blow moulded carry case

WEIGHT 1.45kg

TRAX Medium Duty Short Hex Air Chisel TRAX Medium Duty Short Round Air Chisel

CODE ARX-715H LENGTH 158mm CODE ARX-715R LENGTH 158mm
95-110 psi 95-110 psi
CHISEL SHK Hex PRESSURE CHISEL SHK Round PRESSURE

SHANK DIA 10mm SHANK DIA 10mm

BLOW/MIN 2950 - 3100 BLOW/MIN 2950 - 3100

WEIGHT 1.65kg WEIGHT 1.65kg

TRAX Light Duty Air Chisel Kit Kawasaki Medium Duty Short Air Chisel

CODE ARX-711K CODE KPT-52H LENGTH 216mm
95-110 psi
• 4 x Chisel bits (round) CHISEL SHK Hex PRESSURE
• 1 x ARX-711 tool
CONTENTS • 1 x Retainer spring, SHANK DIA 10mm
• Blow-mould carry case
BLOW/MIN 3100

WEIGHT 2.4kg

PAGE www.nessco.com.au

148

CHISELS & SCALERS
AIRTOOLS - TRAX KAWASAKI

TRAX Air Chisel Bits TRAX Light Duty Air Chisel Kit

CODE DESCRIPTIONS CODE ARX-K5HXK

CB-91550 Rivet buster: Shearing the heads off most rivets to 9 mm dia. • 5 x Chisel bits (hex)
• 1 x ARX-K5HXK tool
CB-91150 Wide chisel with a 30 mm face used for scraping and cleaning. CONTENTS • 2 x Retainer spring,
• Metal carry case with insert
CB-91225 Standard chisel bit: Face width 12 mm.

CB-91250 Claw: For cutting of metal sheet, flat or curved.

CB-91200 Close claw: For cutting the ID of tube. Ideal for bush removal in tight
areas and other such applications.

CB-91450 Spike: For making holes, spreading and many universal apps.

ARX-275S ARX-275QR

TRAX Scaler TRAX Chisel Head Part {DIY}
CODE
ARX-252ATT CODE ARX-275S
CONTENTS CONTENTS ARX-275QR
•••••• ATdDFShiecetcsir--hssesmcewcisaaasolpalesionrtwDngfaaItoYaoiyrrtitcltttihaoeghecmhiosht2bemau7tlsanse5iednn,.t7sa1hvo1eu,rl7yd1eb5ce,oKtnr5oemHatXiecdaanladasntshdueucKhse.PfTu-l52 ••• PTNoleeovalessreMfinrUeoSttTeh:eaRlwteoatoaylisnwebitrehsooauprteelrooaantedlydatwosirtthehtisaloiwnaidltlhocenabutihsteeinbbtrihte.eaktoaogle. of the
• Nreotawinaerrraanntdy may void warranty cover on the tool.
No warranty cover on this item. cover on retainers.

Kawasaki Scaler & Chipper (Japan) Kawasaki Pistol Grip De-Scaler (Japan)

CODE KPT-F6 LENGTH 410mm CODE KPT-F4 LENGTH 395mm
95-105 psi 95-105 psi
PISTON STRK 22mm PRESSURE ARX-268RNS PISTON STRK 20mm PRESSURE ARX-268RNS

PISTON DIA 24mm NEEDLE KIT PISTON DIA 20mm NEEDLE KIT

BLOW/MIN 4000 BLOW/MIN 4000

WEIGHT 2.6kg WEIGHT 2.6kg

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

149

CHISELS & SCALERS

AIRTOOLS - TRAX KAWASAKI

Kawasaki Scaler & Chipper (Japan) Kawasaki Pistol Grip De-Scaler (Japan)

CODE ARX-268 LENGTH 425mm CODE ARX-288 PRESSURE 95-105 psi
95-105 psi
PISTON STRK 28 PRESSURE PISTON STRK 16

PISTON DIA 25mm BLOW/MIN 4000

BLOW/MIN 4600 WEIGHT 1.2kg

WEIGHT 2.85kg LENGTH 290mm

TRAX Pistol Grip De-Scaler

CODE ARX-1110 LENGTH 255mm
PRESSURE 95-105 psi
PISTON STRK 26mm NEEDLE KIT ARX-268RNS

NEEDLE DIA 3mm

BLOW/MIN 4000

WEIGHT 2.55kg

PAGE www.nessco.com.au

150

CHIPPING HAMMERS
AIRTOOLS - TRAX KAWASAKI

TRAX Chipping Hammer Kawasaki Chipping Hammer (Japan)

CODE ARX-JI.0SH WEIGHT 1.65kg (without bit) CODE KPT-NC-0SH WEIGHT 2.6kg (without bit)
LENGTH 275mm (without bit) 275mm (without bit)
PISTON STRK 51mm PISTON STRK 45mm LENGTH

PISTON DIA 20mm PISTON DIA 20mm

BLOW/MIN 3000 BLOW/MIN 3000

INLET 1/4” INLET 3/8”

Kawasaki Chipping Hammer (Japan) Kawasaki Chipping Hammer (Japan)

CODE KPT-NC1-H WEIGHT 5.5kg (without bit) CODE KPT-NC2-H WEIGHT 5.7kg (without bit)
340mm (without bit) 315mm (without bit)
PISTON STRK 24mm LENGTH PISTON STRK 24mm LENGTH

PISTON DIA 28.55mm PISTON DIA 28.55mm

BLOW/MIN 2800 BLOW/MIN 2800

INLET 3/8” INLET 3/8”

TRAX Mini Jack Chipping Hammer

CODE ARX-JI.3SH WEIGHT 8kg (without bit)
LENGTH 455mm (without bit)
PISTON STRK 76mm

PISTON DIA 28.55mm

BLOW/MIN 1800

INLET 3/8”

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

151

RIVETERS

AIRTOOLS - TRAX KAWASAKI

TRAX General Purpose 3/16" Riveter TRAX General Purpose 1/4" Riveter

CODE ARX-200N AIR INLET 1/4” CODE ARX-614 AIR INLET 1/4”
1.78kg 3.92kg
CAPACITY 3/32” - 3/16” WEIGHT 275mm CAPACITY 3/16" - 1/4" WEIGHT 275mm

TIPS PROVIDED 3/32”, 1/8”, 5/32” & HEIGHT 85psi TIPS PROVIDED 3/16", 7/32" & 1/4" HEIGHT 85psi
3/16”

TRACTION PWR 1450 Ft.lbs (manufacturer PRESSURE TRACTION PWR 2600 Ft.lbs (manufacturer PRESSURE
test specs) test specs)

OPERATION Air over hydraulic OPERATION Air over hydraulic

TRAX 3/16" Air Riveter Kit TRAX Industrial 1/4" Riveter

CODE ARX-200NK CODE KPT-416H HEIGHT 320mm
85psi
• 1x ARX-200N Tool CAPACITY 2.4, 3.2, 4.0, 4.8, 6.4mm PRESSURE
• 4x Nose tips
CONTENTS • 1x Service kit HOSE 8mm

OPERATION Air over hydraulic

WEIGHT 2kg

PAGE www.nessco.com.au

152

OVERHEAD TOOL BALANCERS
AIRTOOLS - TRAX KAWASAKI

TRAX Balancer (1.5K) TRAX Balancer (2.0K)

CODE ARX-SB1200 CODE ARX-HSB2

WEIGHT RANGE 0.6 - 1.5kg WEIGHT RANGE 0.8 - 2.0KG

CORD LENGTH 140cm MAX (Steel Cord) CORD LENGTH 175cm MAX (Steel Cord)

TRAX Balancer (3.0K) TRAX Balancer (7.0K)

CODE ARX-SB3000 CODE ARX-SB7K

WEIGHT RANGE 1.5 - 3.0kg WEIGHT RANGE 5.0 - 7.0kg

CORD LENGTH 140cm MAX (Steel Cord) CORD LENGTH 148cm MAX (Steel Cord)

Visit our website at
www.nessco.com.au to view
our product range & latest
Specials Catalogue

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

153

AIR ACCESSORIES

AIRTOOLS - TRAX KAWASAKI

TRAX Suction/Blow Gun Kit TRAX Air Duster

CODE ARX-2007K CODE ARX-ADG64B ARX-AD20B
20” (500mm) Duster for the hard
DESCRIPTION Hi-pressure blow gun or powerful air-operated DESCRIPTION 4” (100mm) Duster for general to reach places (agricultural).
vacuum cleaner complete with hose and catch bag: cleaning work.
To many uses to list! A very popular tool.

AIR INLET 1/4”

TRAX Palm Hammer TRAX Palm Nailer

CODE ARX-515 CODE ARX-516

DESCRIPTION For the fitment of “T” edge moldings and many other applications. DESCRIPTION Driving of odd size nails up to 110mm x 6mm diameter.

PAGE www.nessco.com.au

154

AIR SPRAY GUNS & ACCESSORIES
AIRTOOLS - TRAX KAWASAKI

TRAX Touch-Up Spray Gun TRAX Touch-Up Spray Gun

CODE ARX-FR100 PRESSURE 50 - 60psi CODE ARX-FR200 REGULATOR Built in regulator
adjustment
FEED TYPE Suction feed FEED TYPE Gravity feed

POT CAPACITY 0.25 litre POT CAPACITY 0.25 litre

SPARE POT FR100P SPARE POT FR200P

FLUID TIP SIZE 1.6mm FLUID TIP SIZE 0.08mm

TRAX General Purpose Spray Gun TRAX Professional Spray Gun

CODE ARX-FR102 PRESSURE 80psi CODE ARX-FR77 OP PRESSURE 35 - 75psi

FEED TYPE Suction feed FEED TYPE Suction feed

POT CAPACITY 1 litre POT CAPACITY 1 litre

SPARE POT FR102P SPARE POT FR77P

FLUID TIP SIZE 1.6mm FLUID TIP SIZE 2mm

TRAX Gravity Spray Gun TRAX Light Duty Cleaning Gun

CODE ARX-FR107 PRESSURE 80psi CODE ARX-HY191

FEED TYPE Gravity feed • Economy kerosene cleaning gun
• Lightweight
POT CAPACITY 0.6 litre DESCRIPTION • A good general purpose pressure cleaner for use around a farm

SPARE POT FR107P or workshop
• A good value tool
FLUID TIP SIZE 2mm

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

155

AIR SPRAY GUNS & ACCESSORIES

AIRTOOLS - TRAX KAWASAKI

TRAX Air Brush / Air Brush Kit

CODE ARX-AB119 ARX-AB119K
AIR BRUSH KIT for hobbies, artists, pin stripping,
DESCRIPTION Airbrush only models, spray painters, decorators, murals etc.

PAGE www.nessco.com.au

156

METAL WORKING TOOLS
AIRTOOLS - TRAX KAWASAKI

TRAX Air Saw Kawasaki Air Saw (Japan)

CODE ARX-604 CODE KPT-720

SPARE SAW ARX-604B SPARE SAW KPT-720B

MAX CUT 5mm (mild steel) MAX CUT 20mm (bar)
5mm (metal sheet)
LENGTH 180mm
LENGTH 275mm (without saw)
WEIGHT 0.6kg
WEIGHT 0.9kg

TRAX Air Metal Scissor TRAX Air Metal Scissor

CODE ARX-872 CODE ARX-871

AIR INLET 1/4” AIR INLET 1/4”

WEIGHT 1.16kg WEIGHT 1kg

LENGTH 290mm LENGTH 260mm

PRESSURE 90 - 100psi PRESSURE 90 - 100psi

TRAX Saw Blades TRAX Air Nibbler

CODE ARX-604B.24 CODE ARX-605 WEIGHT 0.95kg

SPARE DIE ARX-605D

SPARE ARX-605P
CUTTER PIN

MAX CUT 1.6mm (mild steel)

LENGTH 180mm

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

157

METAL WORKING TOOLS

AIRTOOLS - TRAX KAWASAKI

Kawasaki Nibbler Die TRAX Nibbler Die

CODE KPT-80D KPT-80P CODE ARX-605D ARX-605P

TRAX Pot Type Sand Blaster (DIY Tool) TRAX Syphon Sand Blaster (DIY Tool)

CODE ARX-2001/2 CODE ARX-2001/1

ABRASIVE TIP 1 litre ABRASIVE TIP Replaceable Ceramic

AIR INLET 1/4” AIR INLET 1/4”

Handyman ~ Hobbyist Sand Blaster. Suitable for light duty jobs where minor blasting is Handyman ~ Hobbyist Sand Blaster. Suitable for light duty jobs where minor blasting is
required. This tool is a pot type tool. required. This tool is a SYPHON type that requires the pick-up feed hose to be placed in a
container of sand.

PAGE www.nessco.com.au

158

GESIPA

GESIPA AIR TOOLS 161
RIVETERS 162

160

GESIPA AIR TOOLS
AIRTOOLS - GESIPA

Gesipa Air Tools

“GESIPA was established in Germany in 1955 as a company committed to developing better blind riveting
technologies. Today, GESIPA has manufacturing facilities around the world including the United States, Germany,
England, and Poland. The driving force behind GESIPA's international success has been the on-going development
of innovative products that enhance productivity through superior engineering and quality workmanship.
In 1975, GESIPA revolutionised blind riveting with the introduction of the GAV Automatic-Feed Blind Riveting System.
GAV systems have set the standard for blind riveting efficiency. GESIPA installation tools are known for their high
quality, durability and functional design. From the Flipper, a low effort manual-riveting tool, to the revolutionary
AccuBird, PowerBird and FireBird battery powered portable tools, GESIPA’s innovation stands clear. Over the years,
GESIPA has made strategic acquisitions to expand the range of blind rivet products offered.
Through it all, GESIPA has been committed to maintaining a leadership role in providing industry with cost-effective
fastening solutions.” GESIPA

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

161

RIVETERS

AIRTOOLS - GESIPA

Gesipa Firefox Pneumatic Rivet Nut Tool Gesipa PH1 - 5/32” Capacity Rivet Tool

CODE FIREFOX CODE PH1 SIZE 3/32, 3mm, 1/8, 5/32
2.4mm - 4mm all types
PRESSURE 100psi CAPACITY M3 - M12 All materials PRESSURE 100psi CAPACITY
WEIGHT 2.3kg
WEIGHT 1.2kg

TRACTION 15700N TRACTION 6850N

AIR CONS 8 litres STROKE 15mm

Gesipa PH2 - 3/16” Capacity Rivet Tool Gesipa PH Axial - 3/16” Capacity Vertical Rivet Tool w/ Vacuum

CODE PH2 SIZE 1/8, 5/32, 3/16, 5mm CODE PHAXIAL SIZE 1/8, 5/32, 3/16, 5mm
3/16" in steel/steel
PRESSURE 100psi CAPACITY standard rivets PRESSURE 100psi CAPACITY 3/16" in steel/steel
WEIGHT 1.3kg WEIGHT 1.8kg standard rivets

TRACTION 8807N TRACTION 8807N

STROKE 15mm STROKE 15mm

Gesipa PH2000 - 1/4” Capacity Rivet Tool Gesipa Taurus 1 - 5/32” Capacity w/ Vacuum Rivet Tool

CODE PH2000 SIZE 25/32, 3/16, 5mm, CODE TAURUS1 SIZE 3/16, 5mm, 6mm, 1/4
PRESSURE 100psi 6mm, 1/4
1/4" in all materials PRESSURE 100psi CAPACITY 1/8" in all materials
WEIGHT 1.9kg CAPACITY WEIGHT 1.3kg 5/32" in aluminum/steel

TRACTION 12000N, 73psi TRACTION 5115N, 73psi

STROKE 22mm STROKE 22mm

PAGE www.nessco.com.au

162

RIVETERS

AIRTOOLS - GESIPA

Gesipa Taurus 2 - 3/16” Capacity w/ Vacuum Rivet Tool Gesipa Taurus 3 - 1/4” Capacity w/ Vacuum Rivet Tool

CODE TAURUS2 SIZE 5/32, 3/16, 5mm, 6mm CODE TAURUS3 SIZE 3/16, 5mm, 6mm, 1/4
PRESSURE 100psi
PRESSURE 100psi CAPACITY 1/4" in all materials

WEIGHT 1.7kg CAPACITY 3/16" in all materials WEIGHT 1.9kg

TRACTION 11120N TRACTION 17000N

STROKE 18mm STROKE 25mm

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

163

LOBSTER

LOBSTER AIR TOOLS 165
RIVETERS 166

164

LOBSTER AIR TOOLS
AIRTOOLS - LOBSTER

Lobster Tools

“For over 100 years Lobtex Co. Ltd. (Lobster Tool Company) has
established a tradition of uncompromising excellence in rivet gun
performance, engineering and value for money. No other rivet gun
manufacturer in the world matches the design innovation, product
versatility and craftsmanship you'll find with Lobster Tools.
Lobster's innovative rivet guns are engineered to satisfy the ergonomic
challenges, mechanical precision, durability and increased productivity
that today's industry demands. Lobster Tools are also certified to ISO
9001:2000, ensuring that the entire engineering and production process
meets the highest international standards.” LOBSTER

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

165

RIVETERS

AIRTOOLS - LOBSTER

Lobster AR011M Riveter Lobster AR011P Riveter

CODE AR011M PRESSURE 71 - 85 psi CODE AR011P PRESSURE 71 - 85 psi

CAPACITY 2.4mm, 3.2mm, 4.0mm, CAPACITY 2.4mm, 3.2mm, 4.0mm,
4.8mm 4.8mm

WEIGHT 1.4kg WEIGHT 1.5kg

TRACTION 7845N TRACTION 7845N

STROKE 14mm STROKE 13mm

Lobster AR011S Riveter Lobster AR021EX Riveter

CODE AR011S PRESSURE 71 - 85 psi CODE AR021EX TRACTION 14220N
STROKE 26mm
CAPACITY 2.4mm, 3.2mm 3/16 (4.8mm) & 1/4 PRESSURE 85 - 92psi
(6.4mm) Standard &
WEIGHT 1kg CAPACITY Monobolt Rivets

TRACTION 2942N

STROKE 14mm WEIGHT 2.9kg

Lobster AR021EXH Riveter Lobster AR021HRJ Riveter

CODE AR021EXH PRESSURE 85 - 92psi CODE AR021HRJ TRACTION 13730N
STROKE 16.5mm
CAPACITY 6.4mm Structural Rivets 2.4mm, 3.2mm, 4.0mm, PRESSURE 85 - 92psi
4.8mm, 6.4mm
WEIGHT 2.9kg CAPACITY All Materials

TRACTION 16637N

STROKE 22mm WEIGHT 2.1kg

PAGE www.nessco.com.au

166

RIVETERS

AIRTOOLS - LOBSTER

Lobster AR021MSJ Riveter Lobster AR021MRJ Riveter

CODE AR021MSJ PRESSURE 71 - 85 psi CODE AR021MRJ PRESSURE 71 - 85 psi

CAPACITY 2.4mm, 3.2mm, 4.0mm, CAPACITY 2.4mm, 3.2mm, 4.0mm,
4.8mm 4.8mm

WEIGHT 1.5kg WEIGHT 1.5kg

TRACTION 8336N TRACTION 8336N

STROKE 14mm STROKE 14mm

Visit our showrooms to view
a large range of air tool products
as well as a large selection of
industrial supplies

Lobster AR1-A1 Riveter

CODE AR1-A1 PRESSURE 71 - 85 psi

CAPACITY 2.4mm, 3.2mm, 4.0mm,
4.8mm All Materials

WEIGHT 1.09kg

TRACTION 10000N

STROKE 19mm

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

167



POWER TOOLS

169

HITACHI

HITACHI POWER TOOLS 171
CORDLESS DRILLS 172
CORDLESS HAMMERS 178
CORDLESS FASTENING TOOLS 179
CORDLESS GRINDERS 180
CORDLESS SCREW DRIVER 180
CORDLESS PLANER 180
CORDLESS TRIMMERS 180
CORDLESS SAWS 181
CORDLESS COMBINATION PACKS 182
CORDLESS BLOWER 183
CORDLESS TOOL ACCESSORIES 183
DRILLS 186
CHUCKS 188
HAMMERS 189
FASTENING TOOLS 191
GRINDERS 192
CUTTERS 195
POLISHERS & SANDERS 196
SAWS 198
PLANERS / ROUTERS 202
BLOWER / VACUUM 203
HEAT GUNS 203

170

HITACHI POWER TOOLS
POWER TOOLS - HITACHI

Hitachi Power Tools

“Hitachi Koki Co. Ltd. has been an independent member of the broadly diversified Hitachi group since 1948.
It's position as a specialist power tool company within a large industrial group brings important benefits to
customers who receive immediate access to the latest advancements in metallurgy, motor design and electronics.
All products are manufactured with high standards of quality in design, material and workmanship, and through
constant innovation Hitachi enables jobs to be completed safer, easier and with less fatigue. Hitachi power tools
consistently offer high levels of quality, durability, operability and performance for all users.
Under a stringent quality control program, Hitachi power tools are without exception subjected to rigid inspections
and tests at each stage of processing. Each part is meticulously scrutinised for flaws by expert inspectors. Designed
and manufactured with the accent on safety and usability, Hitachi power tools are provided with various safety features
such as brakes, safety covers, and clutches.” HITACHI

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

171

CORDLESS DRILLS

POWER TOOLS - HITACHI

18V Slide Cordless, from Strength to Strength

“Packed with power, performance and features, these batteries are fully
compatible with all 18 volt slide battery products past and present. Tools are
available in either kit form or “naked” (without batteries and charger) for extra
value and add-on convenience.” HITACHI

VERSATILE CHUCK 22 STAGE CLUTCH
HEAVY-DUTY METAL SINGLE SLEEVE MULTIPLE CLUTCH SETTINGS
CHUCK WITH AUTO SPINDLE AND FOR OPTIMAL PERFORMANCE
RATCHET LOCK

HIGHLY GEARED EXTERNAL BRUSH
METAL GEAR ACCESS
TRANSMISSION WITH EASY TO REPLACE
HEAVY-DUTY GEARBOX FROM THE OUTSIDE
LED LIGHT SOFT GRIP HANDLE
ULTRA-BRIGHT WHITE ERGONOMIC SOFT GRIP
LED LIGHT FOR LIGHTING HANDLE FOR COMFORTABLE
WORK AREA EXTENDED USE

SLIDE LI-ION BATTERIES ARE LIGHT & EASY
40% LIGHTER THAN NI-CD AND NI-MH BATTERIES.
TOTALLY COMPATIBLE WITH MANY 18V HITACHI
SLIDE TOOLS FROM THE PAST AND IS FITTED WITH A
MULTIPLE PROTECTION CIRCUIT

PAGE www.nessco.com.au

172

CORDLESS DRILLS
POWER TOOLS - HITACHI

3.6V Pencil Driver Drill

CODE DB3DL2(HL) LENGTH 268mm (210mm angled)
WEIGHT 0.4kg
BATTERY 3.6 Volt 2 x 1.5Ah Li-ion
ACCESSORIES batteries, charger,
MAX TORQUE 5Nm driver bit & carry case

DRIVE 6.35mm

LOAD SPEED 600rpm

18V Driver Drill with Brushless Motor 18V Driver Drill with Brushless Motor - Naked

CODE DS18DBL(HJ) CHUCK 13mm keyless CODE DS18DBL(H4) CHUCK 13mm keyless
206mm 206mm
BATTERY 18 Volt Slide LENGTH 2kg BATTERY 18 Volt Slide LENGTH 2kg

MAX TORQUE 8Nm WEIGHT 2 x 5.0Ah Li-ion batteries, MAX TORQUE 8Nm WEIGHT
cooling charger,
DRILL RANGE 13mm (steel) ACCESSORIES driver bit & carry case DRILL RANGE 13mm (steel)
LOAD SPEED 65mm (wood) 65mm (wood)
1800rpm
LOAD SPEED 1800rpm

18V Driver Drill 18V Driver Drill - Naked

CODE DS18DSDL(HJ) CHUCK 13mm keyless CODE DS18DSDL(H4) CHUCK 13mm keyless
LENGTH 288mm LENGTH 288mm
BATTERY 18 Volt Slide WEIGHT 2.1kg BATTERY 18 Volt Slide WEIGHT 2.1kg

MAX TORQUE 46Nm (95Nm hard) ACCESSORIES 2 x 5.0Ah Li-ion batteries, MAX TORQUE 46Nm (95Nm hard)
cooling charger,
DRILL RANGE 13mm (mild steel) driver bit & carry case DRILL RANGE 13mm (mild steel)
65mm (soft wood) 65mm (soft wood)

LOAD SPEED 1600bpm LOAD SPEED 1600bpm

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

173

CORDLESS DRILLS

POWER TOOLS - HITACHI

18V Driver Drill 18V Driver Drill - Naked

CODE DS18DSFL(HF) CHUCK 13mm keyless CODE DS18DSFL(H4) CHUCK 13mm keyless
LENGTH 228mm LENGTH 228mm
BATTERY 18 Volt Slide WEIGHT 1.7kg BATTERY 18 Volt Slide WEIGHT 1.7kg

MAX TORQUE 41Nm (50Nm hard) ACCESSORIES 2 x 2.5Ah Li-ion MAX TORQUE 41Nm (50Nm hard)
batteries, charger,
DRILL RANGE 13mm (mild steel) driver bit & carry case DRILL RANGE 13mm (mild steel)
38mm (soft wood) 38mm (soft wood)

NO LOAD SPEED 1250rpm NO LOAD SPEED 1250rpm

18V Impact (Hammer) Driver Drill 18V Impact (Hammer) Driver Drill - Naked

CODE DV18DSFL(HF) NO LOAD SPEED 1500rpm CODE DV18DSFL(H4) NO LOAD SPEED 1500rpm

BATTERY 18 Volt Cassette CHUCK 13mm keyless BATTERY 18 Volt Cassette CHUCK 13mm keyless

MAX TORQUE 45Nm (55Nm Hard) WEIGHT 1.7kg MAX TORQUE 45Nm (55Nm Hard) WEIGHT 1.7kg with battery

DRILL RANGE 13mm (brick, mild steel) ACCESSORIES 2 x 2.5Ah Li-ion batteries, DRILL RANGE 13mm (brick, mild steel)
IMPACT RATE 38mm (soft wood) charger & carry case 38mm (soft wood)
21000bpm
IMPACT RATE 21000bpm

18V Brushless Impact (Hammer) Driver Drill 18V Brushless Impact (Hammer) Driver Drill - Naked

CODE DV18DBL(HJ) LOAD SPEED 1800rpm CODE DV18DBL(H4) LOAD SPEED 1800rpm
13mm keyless
BATTERY 18 Volt Slide CHUCK 2.1kg BATTERY 18 Volt Slide CHUCK 13mm keyless
2 x 5.0Ah Li-ion batteries,
MAX TORQUE 64Nm (86Nm hard) WEIGHT cooling charger, MAX TORQUE 64Nm (86Nm hard) WEIGHT 2.1kg
driver bit & carry case
DRILL RANGE 13mm (brick) ACCESSORIES DRILL RANGE 13mm (brick)
16mm (mild steel) 16mm (mild steel)
38mm (soft wood) 38mm (soft wood)

IMPACT RATE 21600bm IMPACT RATE 21600bpm

PAGE www.nessco.com.au

174

CORDLESS DRILLS
POWER TOOLS - HITACHI

Feel the Power of the New 18V Cordless Slide

“Packing a real punch, new technology drives the 18V Cordless Slide
into new territory. Selected models feature brushless motors, electronic
switches, battery level indicators and ergonomic moulded handles. Highly
efficient, economical and delivering outstanding performance, it's all here in
one dynamic package (also available 'Naked').” HITACHI

Features

MAXIMUM PERFORMANCE
EQUIPPED WITH BRUSHLESS MOTOR
WHICH PROVIDES GREATER POWER,
HIGHER SPEEDS AND LONGER
WORK TIME BETWEEN CHARGES

BRUSHLESS EFFICIENCY
THIS MOTOR TURNS WITH LESS
ELECTRONIC LOSS AND FRICTION
RESISTANCE. 30% MORE
EFFICIENT THAN CONVENTIONAL
CARBON BRUSH MOTOR

TOTAL CONTROL FORCE FACTOR
CONTROL PANEL PROVIDES ELECTRONIC SWITCH
ROTATIONAL SPEED TRIGGER THAT REQUIRES
SELECTOR AND INDICATOR. 50% LESS OF THE
POWERFUL LED LIGHT AND PULL FORCE OF THE
SWITCH WITH BATTERY CONVENTIONAL TRIGGER
LEVEL INDICATOR

OPTIONAL HOOK
ADJUSTABLE ON BOTH
SIDES AND REMOVABLE

SLIDE SHOWS A LIGHTER SIDE
THE LI-ION BATTERY HAS ALL THE FEATURES AND
BUILT-IN TECHNOLOGY OF THE CASSETTE. TOTALLY
COMPATIBLE WITH MANY 18V HITACHI SLIDE TOOLS
AND FITTED WITH A MULTIPLE PROTECTION CIRCUIT

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

175

CORDLESS DRILLS

POWER TOOLS - HITACHI

18V Impact Driver Drill 18V Impact Driver Drill - Naked

CODE DV18DSDL(HJ) LOAD SPEED 1400rpm CODE DV18DSDL(H4) LOAD SPEED 1400rpm
CHUCK 13mm keyless CHUCK 13mm keyless
BATTERY 18 Volt Slide WEIGHT 2.2kg BATTERY 18 Volt Slide WEIGHT 2.2kg with battery

MAX TORQUE 45Nm (92Nm hard) ACCESSORIES 2 x 5.0Ah Li-ion batteries, MAX TORQUE 45Nm (92Nm hard)
cooling charger,
DRILL RANGE 13mm (concrete) driver bit & carry case DRILL RANGE 13mm (concrete)
13mm (steel) 13mm (steel)
36mm (wood) 36mm (wood)

IMPACT RATE 27000bm IMPACT RATE 27000bm

18V Impact Driver 18V Impact Driver - Naked

CODE WH18DSDL(HJ) LENGTH 162mm CODE WH18DSDL(H4) LENGTH 162mm
WEIGHT 1.7kg WEIGHT 1.7kg with battery
BATTERY 18 Volt Slide BATTERY 18 Volt Slide
ACCESSORIES 2 x 5.0Ah Li-ion batteries,
MAX TORQUE 176Nm cooling charger, MAX TORQUE 176Nm
driver bit & carry case
DRIVE 6.35mm Hex DRIVE 6.35mm Hex

NO LOAD SPEED 2600rpm NO LOAD SPEED 2600rpm

18V IP56 Brushless Impact Driver 18V IP56 Brushless Impact Driver - Naked

CODE WH18DDL(HJ) LENGTH 162mm CODE WH18DDL(H4) LENGTH 162mm
WEIGHT 1.5kg 1.5kg with battery
BATTERY 18 Volt Slide ACCESSORIES 2 x 5.0Ah Li-ion batteries, BATTERY 18 Volt Slide WEIGHT
cooling charger, Water & dust proofing to
MAX TORQUE 172Nm FEATURES driver bit & carry case MAX TORQUE 172Nm international standard IP56

DRIVE 6.35mm Hex Water & dust proofing to DRIVE 6.35mm Hex FEATURES
international standard IP56
NO LOAD SPEED 3100rpm NO LOAD SPEED 3100rpm

PAGE www.nessco.com.au

176

CORDLESS DRILLS
POWER TOOLS - HITACHI

18V Electronic Pulse Driver 18V Electronic Pulse Driver - Naked

CODE WM18DBL(HJ) LENGTH 162mm CODE WM18DBL(H4) LENGTH 162mm

BATTERY 18 Volt Slide WEIGHT 1.7kg BATTERY 18 Volt Slide WEIGHT 1.7kg

DRIVE 6.35mm Hex DRIVE 6.35mm Hex
TORQUE
33Nm (Bolt mode) ACCESSORIES 2 x 5.0Ah Li-ion batteries, 33Nm (Bolt mode)
11Nm (Drill mode) cooling charger, 11Nm (Drill mode)
5-point Clutch 2.3-5.3Nm driver bit & carry case TORQUE 5-point Clutch 2.3-5.3Nm
(Electronic Pulse Mode)
(Electronic Pulse Mode)

CAPACITY CAPACITY

ELECTRONIC BOLT MODE SELF DRILLING DRILL MODE ELECTRONIC ELECTRONIC BOLT MODE SELF DRILLING DRILL MODE ELECTRONIC
PULSE MODE SCREW MODE CLUTCH MODE PULSE MODE SCREW MODE CLUTCH MODE

Wood Screw Ordinary Bolt Self Drilling Woodwork Small Screw M6 Wood Screw Ordinary Bolt Self Drilling Woodwork Small Screw M6
Ø 4.2 x 75mm M4 - M10 Screw Ø 6mm Drilling Ø 21mm Ø 4.2 x 75mm M4 - M10 Screw Ø 6mm Drilling Ø 21mm

High Tension Steel Drilling High Tension Steel Drilling
Bolt M4 - M6 Ø 10mm Bolt M4 - M6 Ø 10mm

Mortar Drilling Mortar Drilling
Ø 6mm Ø 6mm

LOAD SPEED LOAD SPEED

1100rpm 640rpm 1100rpm 1100rpm 450rpm 1100rpm 640rpm 1100rpm 1100rpm 450rpm

Multiple Protection Circuit Lightweight Battery

Hitachi Li-ion batteries have a multiple protection Thanks to advances in battery technology, Lithium-
circuit fitted that monitors every cell in the battery. Ion batteries weigh up to 40% less than their Ni-Cd
This protects the battery and tool by providing overload and Ni-MH equivalent.
protection which stops the tool instantly in the event of a
jam or overload. It gives over-charge and over-discharge Each Lithium-Ion cell can store considerably more
protection which ensures the battery life is extended. energy than older style battery technology. Lightweight
batteries mean lightweight tools! This results in reduced
HEAT user fatigue during extended work periods.
SENSOR

AIR VENTS MULTIPLE
FOR COOLING CIRCUIT
BETWEEN CELLS PROTECTION

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

177

CORDLESS HAMMERS

POWER TOOLS - HITACHI

18V Rotary Hammer 2-mode 18V Rotary Hammer 2-mode - Naked

CODE DH18DSL(HJ) LOAD SPEED 1500rpm CODE DH18DSL(H4) LOAD SPEED 1500rpm
LENGTH 251mm 251mm
BATTERY 18 Volt Slide WEIGHT 2.3kg BATTERY 18 Volt Slide LENGTH 2.3kg

DRIVE SDS Plus ACCESSORIES 2 x 5.0Ah Li-ion batteries, DRIVE SDS Plus WEIGHT
cooling charger, carry
DRILL RANGE 16mm (concrete) case, side handle & depth DRILL RANGE 16mm (concrete)
13mm (mild steel) gauge. Drill bit not included 13mm (mild steel)
18mm (wood) 18mm (wood)

IMPACT RATE 6200bpm IMPACT RATE 6200bpm

36V Rotary Hammer 36V Rotary Hammer - Naked

CODE DH36DAL(HL) DRIVE SDS Plus CODE DH36DAL(H4) DRIVE SDS Plus
LENGTH 322mm LENGTH 322mm
BATTERY 36 Volt BATTERY 36 Volt
WEIGHT 4kg
DRILL RANGE 26mm (concrete) WEIGHT 4kg DRILL RANGE 26mm (concrete)
13mm (mild steel) 13mm (mild steel)
30mm (wood) 30mm (wood)

IMPACT RATE 4500bpm ACCESSORIES 2 x 2.6Ah Li-ion batteries, IMPACT RATE 4500bpm
cooling charger, carry case,
LOAD SPEED 1100rpm side handle & depth stopper LOAD SPEED 1100rpm

PAGE www.nessco.com.au

178

CORDLESS FASTENING TOOLS
POWER TOOLS - HITACHI

18V Impact Wrench 18V Impact Wrench - Naked

CODE WR18DSDL(HJ) DRIVE 12.7mm Square CODE WR18DSDL(H4) DRIVE 12.7mm Square
LENGTH 173mm LENGTH 173mm
BATTERY 18 Volt Slide WEIGHT 1.7kg BATTERY 18 Volt Slide WEIGHT 1.7kg with battery
2 x 5.0Ah Li-Ion batteries,
MAX TORQUE 271Nm ACCESSORIES cooling charger & carry MAX TORQUE 271Nm
case. Socket not included
IMPACT RATE 3200bpm IMPACT RATE 3200bpm

NO LOAD SPEED 2600rpm NO LOAD SPEED 2600rpm

18V Brushless Impact Wrench 18V Brushless Impact Wrench - Naked

CODE WR18DBDL(HJ) DRIVE 12.7mm Square CODE WR18DBDL(H4) DRIVE 12.7mm Square
LENGTH 162mm 162mm
BATTERY 18 Volt Slide WEIGHT 1.7kg BATTERY 18 Volt Slide LENGTH 1.7kg
2 x 5.0Ah Li-ion batteries,
MAX TORQUE 160Nm ACCESSORIES cooling charger & carry MAX TORQUE 160Nm WEIGHT
case. Socket not included
IMPACT RATE 3200bpm IMPACT RATE 3200bpm

LOAD SPEED 2600rpm LOAD SPEED 2600rpm

18V High Torque Impact Wrench 18V High Torque Impact Wrench - Naked

CODE WR18DSHL(HJ) DRIVE 12.7mm Square CODE WR18DSHL(H4) DRIVE 12.7mm Square
LENGTH 264mm 264mm
BATTERY 18 Volt Slide WEIGHT 3.4kg BATTERY 18 Volt Slide LENGTH 3.4kg with battery
2 x 5.0Ah Li-ion batteries,
MAX TORQUE 480Nm ACCESSORIES cooling charger & carry MAX TORQUE 480Nm WEIGHT
case. Socket not included
IMPACT RATE 2000bpm IMPACT RATE 2000bpm

NO LOAD SPEED 1500rpm NO LOAD SPEED 1500rpm

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

179

CORDLESS ASSORTED TOOLS

POWER TOOLS - HITACHI

18V 125mm Angle Grinder 18V 125mm Angle Grinder - Naked

CODE G18DSL(HJ) NO LOAD SPEED 9100rpm CODE G18DSL(H5) NO LOAD SPEED 9100rpm

BATTERY 18 Volt Slide LENGTH 293mm BATTERY 18 Volt Slide LENGTH 293mm

WHEEL DIA 125mm WEIGHT 1.8kg WHEEL DIA 125mm WEIGHT 1.8kg with battery

HOLE DIA 22mm 2 x 5.0Ah Li-ion batteries, HOLE DIA 22mm
cooling charger, carry
SPINDLE M14 x 2 ACCESSORIES case, grinding disc, SPINDLE M14 x 2
wrench & side handle

18V Slide Automatic Screw Driver 18V Slide 82mm Planer

CODE WF18DSL(HJ) FEATURES Multiple plate friction type CODE P18DSL(HJ) FEATURES Heavy duty aluminium
ACCESSORIES silent clutch CAPABILITY end bracket
BATTERY 18 Volt Slide 2 x 5.0Ah Li-ion BATTERY 18 Volt Slide battery ACCESSORIES Max 2mm cutting depth
batteries, cooling and 9mm max rebate
charger & carry case BLADE WIDTH 82mm capacity
NAKED VER. P18DSL(H4)
CAPACITY 25-41mm screws NAKED VER. WF18DSL(H4) 2 x 5.0Ah Li-ion batteries,
cooling charger & carry case

18V Grass Trimmer - Naked 18V Hedge Trimmer - Naked

CODE CG18DSDL(H5) WEIGHT 4.3kg CODE CH18DSL(H4) WEIGHT 2.3kg
ACCESSORIES Box wrench, Hex wrench
BATTERY 18 Volt Slide and Safety glasses BATTERY 18 Volt Slide

CUT DIAMETER 310mm CUT WIDTH 15mm

NO LOAD SPEED 5000rpm LOAD SPEED 1100rpm

RUN TIME 28min ave (BSL1830) CUT LENGTH 520mm

PAGE www.nessco.com.au

180

CORDLESS SAWS
POWER TOOLS - HITACHI

18V D-Handle Jigsaw - Naked 18V Circular Saw - Naked

CODE CJ18DSL(H4) LOAD SPEED 2400rpm CODE C18DSL(H4) LENGTH 351mm
LENGTH 274mm 3.2kg
BATTERY 18 Volt Slide BATTERY 18 Volt Cassette WEIGHT
WEIGHT 2.4kg
CUT WIDTH 135mm (wood) BLADE DIA 165mm
10mm (mild steel plate)
MAX CUT SIZE 90°: 57mm, 45°: 40mm
CUT RADIUS 25mm
LOAD SPEED 3400rpm
STROKE 26mm

18V Reciprocating Saw 18V Reciprocating Saw - Naked

CODE CR18DSL(HJ) LOAD SPEED 2100rpm CODE CR18DSL(H4) LOAD SPEED 2100rpm
LENGTH 434mm LENGTH 434mm
BATTERY 18 Volt Slide WEIGHT BATTERY 18 Volt Slide
3.4kg WEIGHT 3.4kg
STEEL CUT O.D. 90mm (steel pipe) ACCESSORIES STEEL CUT O.D. 90mm (steel pipe)
10mm (steel plate) 2 x 5.0Ah Li-ion batteries, 10mm (steel plate)
cooling charger, carry
WOOD CUT 90mm case, blade & wrench WOOD CUT 90mm

STROKE 28mm STROKE 28mm

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

181

CORDLESS COMBINATION PACKS

POWER TOOLS - HITACHI

2 Piece 18V Slide Combination Pack 2 Piece 18V Slide Combination Pack

CODE CONTENTS CODE CONTENTS

DV18DSDL Impact (Hammer) Driver Drill DV18DSDL Impact (Hammer) Driver Drill

WR18DSDL Impact Wrench WH18DSDL Impact Driver

KC18DSRL(HJ) 2 X 5.0Ah Li-Ion Slide Batteries KC18DML(HJ) 2 X 5.0Ah Li-Ion Slide Batteries

UC18YGSL Battery Charger UC18YGSL Battery Charger

Twin Tool Carry Case Twin Tool Carry Case

2 Piece 18V Slide Combination Pack 2 Piece 18V Slide Brushless Combination Pack

CODE CONTENTS CODE CONTENTS

DV18DSFL Impact (Hammer) Driver Drill DV18DBL Brushless Impact (Hammer) Driver Drill

WH18DSDL Impact Driver WR18DBDL Brushless Impact Wrench

KC18DSVL(HF) 2 X 2.5Ah Li-Ion Slide Batteries KC18DOL(HJ) 2 X 5.0Ah Li-Ion Slide Batteries

UC18YGSL Battery Charger UC18YRSL Battery Charger

Twin Tool Carry Case Twin Tool Carry Case

Fan cooling chargers allow
batteries to keep their cool

Hitachi fan cooling chargers protect batteries by
effectively cooling the battery once its connected.
They further protect the battery by incorporating a 3-way
protection system: Voltage protection, temperature
sensor and backup timer to prevent over-charging.

2 Piece 18V Slide Brushless Combination Pack AIR FAN
FOR COOLING
CODE CONTENTS BATTERY DURING
CHARGING
DV18DBL Brushless Impact (Hammer) Driver Drill BACKUP VOLTAGE
TIMER PROTECTION
WH18DDL IP56 Brushless Impact Driver PREVENT
OVERCHARGING
KC18DDL(HJ) 2 X 5.0Ah Li-Ion Slide Batteries

UC18YRSL Battery Charger

Twin Tool Carry Case

PAGE www.nessco.com.au

182

CORDLESS COMBO PACKS | ACCESSORIES
POWER TOOLS - HITACHI

3 Piece 18V Slide Combination Pack 3 Piece 18V Slide Combination Pack

CODE CONTENTS CODE CONTENTS

DV18DSDL Brushless Impact (Hammer) Driver Drill DV18DSDL Brushless Impact (Hammer) Driver Drill

WH18DSDL Impact Driver WR18DSDL Impact Driver

KC18DGDL(HJ) G18DSL 125mm Angle Grinder KC18DGRL(HJ) G18DSL 125mm Angle Grinder
2 X 5.0Ah Li-Ion Slide Batteries 2 X 5.0Ah Li-Ion Slide Batteries

UC18YRSL Battery Charger UC18YRSL Battery Charger

Site Bag Site Bag

10 Piece 18V Slide Combination Pack 13 Piece 18V Slide Combination Pack

CODE CONTENTS CODE CONTENTS

DV18DSDL Impact (Hammer) WH18DSDL Impact Driver DV18DBL Brushless (Hammer) Impact Driver Drill
Driver Drill UB18DSL Lantern C18DSL Circular Saw WR18DBDL B Impact Wrench
C18DSL Circular Saw CJ18DSL Jig Saw UR18DSL Radio

MPS18(HJ) CJ18DSL Jig Saw UB18DAL Torch CR18DSL Reciprocating Saw UB18DSL Lantern
CR18DSL Reciprocating Saw 4 X 5.0Ah Li-Ion Slide Batteries SMPS18(HJ) DH18DSL Rotary Hammer UB18DAL Torch
G18DSL 125mm Angle Grinder 4 X 5.0Ah Li-Ion Slide Batteries
DH18DSL Rotary Hammer UC18YRSL Battery Charger RB18DSL Blower Vac UC18YRSL Battery Charger

G18DSL 125mm Angle Grinder 2 x Site Bags R18DSL Wet & Dry Vacuum 2 x Site Bags

RB18DSL Blower Vac WH18DBDL B Impact Driver

18V Blower - Naked Site Bags
CODE
CODE RB18DSL(H4) LENGTH 496mm 797157 SIZE
WEIGHT 1.7kg 797142 Small
BATTERY 18 Volt Slide DURATION 19 minutes 402094 Medium
402096 Large - Heavy duty canvas
AIR PRESSURE 3.9 kPa ACCESSORIES Nozzle, dust bag not Premium - Extendable handle and roller wheels
included
AIR FLOW VOL 2.2 m³/min

LOAD SPEED 15000rpm

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

183

CORDLESS TOOL ACCESSORIES

POWER TOOLS - HITACHI

18V Slide Cordless Fan - Naked 9.6V-18V AM & FM Radio

CODE UF18DSL(HO) ACCESORY Includes AC adapter CODE UR18DSL2(H4) DIMENSIONS 231 x 184 x 281mm
RUN TIME Approx 5 hours with New integrated phone / MP3
BATTERY Compatible with Hitachi a 5.0Ah battery BATTERY Compatible with all FEATURES player dock (USB & AUX not
18V slide battery Hitachi batteries included)
except 10.8V WEIGHT 3.3Kg
CHARGING
FM FREQUENCY 87.50 - 108MHz PORT 5V

AM FREQUENCY 522 - 1620kHz

SPEAKER 76mm diameter x 2

18V Slide LED Worklight - Naked Torches
CODE
CODE UB18DGL(HO) FEATURES 36 ultra-bright LED's UB10DL(B0) DESCRIPTION VOLTAGE BATTERY
RUN TIME Approx 6.5 hours with UB12D 10.8V Torch 10.8V -
BATTERY Compatible with Hitachi a 5.0Ah battery UB18D 12V Torch 9.6V / 12V Cassette
18V slide battery UB18DAL(D0) 18V Torch 14.4V / 18V Cassette
UB24D 18V Torch 14.4V / 18V Slide
24V Torch 24V Slide

Lanterns 18V Wet & Dry Vacuum - Naked
CODE
UB12DL DESCRIPTION VOLTAGE BATTERY CODE R18DSL(H4) WEIGHT 0.84kg
12V Lantern 9.6V / 12V Cassette DURATION 29 minutes
UB18DL 18V Lantern BATTERY 18 Volt Slide Brush Nozzle
18V Lantern ACCESSORIES Crevice Nozzle
UB18DSL(F0) 14.4V / 18V Cassette CAPACITY 670ml (dust) Squeegee Nozzle
120ml (liquid)

14.4V / 18V Slide LENGTH 427mm

PAGE www.nessco.com.au

184

CORDLESS TOOL ACCESSORIES
POWER TOOLS - HITACHI

Cordless Slide Li-ion Batteries Cordless Cassette Li-ion Batteries

CODE CAPACITY VOLTAGE TYPE CODE CAPACITY VOLTAGE TYPE
14.4V BSL1430 3.6V EBM315
329083 3Ah 18V BSL1815 326299 1.5Ah 10.8V BCL1015
18V BSL1820 14.4V BCL1415
330557 1.5Ah 18V BSL1825 329371 1.5Ah 14.4V BCL1430
18V BSL1830 18V BCL1815
18V BSL1840 327729 1.5Ah 18V EBM1830
18V BSL1850 18V BCL1840
334420 2Ah 36V BSL3626 326824 3Ah

335788 2.5Ah 327731 1.5Ah

326240 3Ah

330068 3Ah 334425 4Ah

334421 4Ah

335790 5Ah

328036 2.6Ah

Cordless Nickel Metal Hydride Batteries

CODE CAPACITY VOLTAGE TYPE
EB1233X
326053 3.3Ah 12V EB1433X
EB1833X
326054 3.3Ah 14.4V EB2433X

326055 3.3Ah 18V

326056 3.3Ah 24V

Cordless Nickel Cadmium Batteries

CODE CAPACITY VOLTAGE TYPE
12V BCC1212
332085 1.2Ah 12V EB1214S
322629 1.4Ah 12V BCC1215
333156 1.5Ah 12V
310452 2Ah 12V EB12B
325289 2Ah 14.4V EB1220BL
322633 1.4Ah 14.4V EB1414S
333159 1.5Ah 14.4V BCC1415
315128 2Ah 18V
322882 1.4Ah 18V EB14B
18V EB1814SL
333161 1.5Ah 18V BCC1815
24V EB1820
319762 2Ah 24V EB1820L

322880 2Ah EB24B Chargers
EB2420
316959 2Ah CODE
UC3SFL
319805 2Ah UC10SFL(H0) DESCRIPTION VOLTAGE BATTERY
UC14YFA Li-ion Charger 3.6V -
UC18YGL2(H0) Li-ion Charger 10.8V -
UC18YGSL(H0) Ni-CD / Ni-MH Charger 7.2V - 14.4V -
UC18YRL Li-ion / Ni-CD / Ni-MH Charger 7.2V - 18V Cassette
UC18YRSL(H0) Li-ion Charger 14.4V - 18V Slide
UC24YFA Li-ion / Ni-CD / Ni-MH Cooling Charger 7.2V - 18V Cassette
UC24YFB Li-ion Cooling Charger 14.4V - 18V Slide
UC36YRL Ni-CD / Ni-MH Charger 7.2V - 24V -
Ni-CD / Ni-MH Charger 24V Slide
Li-ion Cooling Charger 26V Slide

(08) 9333 4999 [email protected] (03) 9706 8400 [email protected] PAGE

185

DRILLS

POWER TOOLS - HITACHI

6.5mm Drill 10mm Reversible Drill
CODE
CHUCK D6SH WEIGHT 0.9kg CODE D10VC2 LENGTH 238mm
0.5 – 6.5mm Keyed DRILL RANGE 6.5mm (steel) WEIGHT 1.3kg
LOAD SPEED 9mm (wood) CHUCK 1 – 10mm Keyless 10mm (steel)
4500rpm DRILL RANGE 25mm (wood flat spade)
POWER INPUT LOAD SPEED 2300rpm 16mm (wood auger)
LENGTH 240W
206mm POWER INPUT 460W

TORQUE 30.4Nm

13mm Heavy Duty Reversible Drill with Safety Slip Clutch 13mm Reversible Drill

CODE D13VB3 LENGTH 339mm CODE D13VF LENGTH 287mm
WEIGHT 2.1kg
CHUCK 1.5 - 13mm Keyless WEIGHT 2kg CHUCK 1.5 - 13mm Keyed
DRILL RANGE 13mm (steel)
LOAD SPEED 1000rpm (low) 13mm (steel) LOAD SPEED 850rpm 40mm (wood)
POWER INPUT 3000rpm (high) 40mm (wood)
790W DRILL RANGE POWER INPUT 710W

TORQUE 30.4Nm TORQUE 47Nm

13mm High Torque Reversible Drill 13mm High Torque Drill

CODE D13VG LENGTH 287mm CODE D13 WEIGHT 3kg
WEIGHT 2.1kg DRILL RANGE 13mm (steel)
CHUCK 1.5 - 13mm Keyed CHUCK 1.5 - 13mm Keyed 40mm (wood)
DRILL RANGE 13mm (steel)
LOAD SPEED 600rpm 40mm (wood) LOAD SPEED 550rpm

POWER INPUT 710W POWER INPUT 720W

TORQUE 74Nm LENGTH 378mm

PAGE www.nessco.com.au

186