Jackson Lumber & Millwork Catalog

LUMBER & MILLWORK

Your company proudly presents
CableRail and DesignRail® by Feeney, Inc.

STAINLESS STEEL CABLE INFILL
• Attractive, durable, ultra-low

maintenance
• Great for metal, wood, or

composite wrapped posts
• Easy to Install

• Residential and commercial
• Indoor or outdoor

March 2018 ALUMINUM RAILING SYSTEMS
• Wide variety of mounting, top

rail, and color options
• AAMA 2604 powder coated

finish for incredible beauty &
weather resistance

197

CHOOSING THE CORRECT HANGER

LUMBER & MILLWORK

GENERAL SIMPSON RECOMMENDATIONS • C ontact Simpson for availability of ZMAX™, HDG, and Stainless
Steel products.
• F or wood with actual retention levels greater than 0.40 pcf for ACQ,
0.41 pcf for CBA-A, or 0.21 pcf for CA-B (Ground Contact), Stainless Due to the many variables involved, Simpson cannot
Steel connectors and fasteners are recommended. Verify actual provide estimates on service life of connectors,
retention level with the wood treater. anchors or fasteners. We suggest that all users and
specifiers also obtain recommendations for ZMAX™
• W hen using Stainless Steel connectors, use Stainless Steel fasten- (G185 per ASTM A653) Hot Dip Galvanized (per ASTM
ers. When using ZMAX/HDG galvanized connectors, use fasteners A123 for connectors and ASTM A153 for fasteners and
galvanized per ASTM A153. anchors) or mechanically galvanized fasteners and
anchors (per ASTM B695 class 55 or greater) or other
• T esting indicates wood installed dry reduces potential corrosion. If coatings from the treated wood supplier for the type of
dry wood is used, see our website for additional information. wood used. However, as long as Simpson’s recommendations
are followed, Simpson stands behind its product
• W ith the exception of ACZA, treatments with ammonia carriers performance and our standard warranty applies.
were not included in our testing. Preservatives with an ammonia
base (carrier) are generally known to be more corrosive.

GUIDELINES FOR SELECTING THE PROPER CONNECTOR

1 Evaluate the Application. Low = Use Simpson standard painted and G90 galvanized
Consider the type of structure and how it will be used. These recommendations connectors as a minimum.
may not apply to non-structural applications such as fences.
Med = Use ZMAX/HDG galvanized connectors as a minimum.
2 Evaluate the Environment. Use fasteners galvanized per ASTM A153.
Testing and experience indicate that indoor dry environments are less corro-
sive than outdoor environments. Determining the type of environment where a High = Use Type 304 or 316 Stainless Steel connectors
connector or fastener will be used is an important factor in selecting the most and fasteners.
appropriate material and finish for use on the connectors and fasteners. To help
in your decision making, consider the following general exposure information: Connector Coating Recommendation - Structural Applications
Interior Dry Use: Includes wall and ceiling cavities, and raised floor applications
of enclosed buildings that have been designed to ensure that condensation and ACQ-C, ACQ-D (Carbonate),
other sources of moisture do not develop.
Exterior - Dry: Includes outdoor installations in low rainfall environments and no Environment Untreated SBX/DOT CA-B & CBA-A Other
regular exposure to moisture.
Exterior - Wet: Includes outdoor installations in higher moisture and rainfall Wood & Zinc Higher ACZA or
environments.
Higher Exposure Use: Includes exposure to ocean salt air, large bodies of Borate No With Chemical Uncertain
water, fumes, fertilizers, soil, some preservative treated woods, industrial zones,
acid rain, and other corrosive elements. Ammonia Ammonia Content 1

3 Evaluate and select a suitable pressure-treated wood for the intended appli- Interior Dry Low Low Med Med High High High
cation and environment.
Exterior - Dry Low N/A 2 Med High High High High
The treated wood supplier should provide all the information needed regarding
the wood being used. This information should include: the specific type of wood Exterior - Wet Med N/A 2 Med 3, 4 High High High High
treatment used, if ammonia was used in the treatment, and the chemical reten-
tion level. If the needed information is not provided then Simpson would recom- Higher Exposure High N/A 2 High High High High High
mend the use of Stainless Steel connectors and fasteners. You should also ask
the treated wood supplier for a connector coating or material recommendation. Uncertain High N/A 2 High High High High High
 
4 U se the chart AT THE RIGHT, which was created based on Simpson’s testing 1. Woods with actual retention levels greater than 0.40 pcf for ACQ, 0.41
and experience to select the connector finish or material. pcf for CBA-A, or 0.21 pcf for CA-B (Ground Contact level). 
2. Borate treated woods are not appropriate for outdoor use. 
If a pressure treated wood product is not identified on the chart, Simpson has 3. Test results indicate that ZMAX/HDG will perform adequately, subject
not evaluated test results regarding such product and therefore cannot make to regular maintenance and periodic inspection. However, the nation-
any recommendation other than the use of Stainless Steel with that product. ally-approved test method used, AWPA E12-94, is an accelerated test,
Manufacturers may independently provide test results or other product use so data over an extended period of time is not available. If uncertain,
information; Simpson expresses no opinion regarding any such information. use Stainless Steel. 
4. Some treated wood may have excess surface chemicals making it
potentially more corrosive. If you suspect this or are uncertain, use
Stainless Steel.

Visit www.strongtie.com/info for more information.

5 C ompare the treated wood supplier’s recommendation with the
Simpson recommendation.

If these recommendations are different, Simpson recommends that
the most conservative recommendation be followed.

EXPANDED CORROSION RESISTANCE PRODUCTS
While we’ve always provided finishes with extra corrosion
resistance, we have greatly expanded the number of products
we offer in ZMAX TM, HDG and stainless steel to help you
address your corrosion needs.

198 March 2018

LUMBER & MILLWORK

March 2018 For more information or to view our online installation video, visit 199
www.woodwayproducts.com

LUMBER & MILLWORK

PRESSURREE TTRREEAATTEEDD##11SSYYPP

8’ 10’’ 12’ 1144’’ 1166’’ 2200’’

1 x 4 OOUUTT114488 OOUUTT11441122 OOUUTT11441166
1 x 6
1 x 8 OOUUTT116688 OOUUTT11661122 OOUUTT11661166
5/4 x 6
2 x 4 OOUUTT118888 OOUUTT11881122 OOUUTT11881166

AACCQQ55446688 AACCQQ5544661100 AACCQQ5544661122 AACCQQ5544661144 AACCQQ5544661166 AACCQQ5544662200

AACCQQ224488 AACCQ22441100 AACCQQ2441122 AACCQQ22441166 DECKING ACCESSORIES

2 x 6 OOUUT226688 OOUUT22661100 OOUUTT22661122 OOUUTT2261144 OOUUTT2261166 ACQ CEDAR MAHOG
  
2 x 8 OOUUT228888 OOUUT22881100 OOUUTT22881122 OOUUTT2281144 OOUUTT2281166 OOUUTT22882200 Newel Post 
Porch Post   
2 x 10 OOUUTT2110088 OOUUTT21100110 0 OOUUTT221001122 OOUUTT2211001144 OOUUTT2211001166 OOUUTT2211002200 Lamp Post   
Mailbox Post   
2 x 12 OOUUTT2112288 OOUUTT221221122 OOUUTT2211221166 OOUUTT2211222200 2x2 Sq Baluster  
2x2 Turned Baluster  
PRESSURREE TTRREEAATTEEDD##22SSYYPP 8’ Handrail   
12’ Handrail   
8’ 10’’ 12’ 1144’’ 1166’’ Stair Stringer   
Post Caps  
4 x 4 OOUUTT444488 OOUUTT44441100 OOUUTT44441122 OOUUTT44441166 Lattice Panels
1x8 S4S 
4 x 6 OOUUTT446688 OOUUTT44661122 OOUUTT44661166 2x4 S4S 
6 x 6 4x4 Posts 
OOUUTT6666 OOUUTT66661100 OOUUTT66661122 OOUUTT66661166

SSIILLLLBBLLOOCCKK

2 x 6 WWOOUUTT22661166

FIRE TRREEAATTEEDD SSPPFFFFOORRIINNTTEERRIOIORRUUSSEE

88’’ 10’’ 12’ 1144’’ 1166’’

2 x 4 FRFRPP224488 FFRRPP22441100 FRFRPP22441122 FRFRPP22441166
FRFRPP22661166
2 x 6 FFRRPP22661100 FRFRPP22661122

2 X 8 & 2 X 10 Available Special Order

VINYL/PVC LATTICE

CODE DESCRIPTION

We stock a full line of ACQ - PCVCLATTPRIV PVC PRIVACY DIAGNL LATTICE/WHT
compatible fasteners and PVCLATTPRIVSQ 4 X 8 SQ PRIV WHT PVC LATTICE
PVCLATT 4X8 WHT DIAGONAL PVC LATTICE

joist hangers COLORED LATTICE AVAILABLE BY SPECIAL ORDER

Trex Select decking features high-performance shell technology and nature
inspired colors at an affordable price. It stands up to both weather and
weekend mishaps while resisting stains and mold better than traditional
composites.

CODE DESCRIPTION
7/8"X5-1/2"X12' TREX SEL PEBBLE GRAY SQE
TTRREEXXSPSGP1G212 7/8"X5-1/2"X16' TREX SEL PEBBLE GRAY SQE
TTRREEXXSPSGP1G616 7/8"X5-1/2"X20' TREX SEL PEBBLE GRAY SQE
TTRREEXXSPSGP2G020

Contact a Jackson Lumber sales associate for more information on Trex decking, railing, and all Trex
accessories.

www.trex.com

200 www.trex.com March 2018

LUMBER & MILLWORK

ENVIRONMENTALLY Top Reasons Why
PREFERABLE
Builders, Contractors, & Homeowners Use
The MicroPro Treated Wood Process is MicroPro® Pressure Treated Wood Products
certified under SCS’s Environmentally
Preferable Product (EPP) program based • First Wood Treatment Process to Complete Life-Cycle Assessment Studies - The
Osmose® MicroPro wood treatment process systems were analyzed by Scientific
on Life-Cycle Assessment. Certification Systems under an exhaustive environmental review process called
Life-Cycle Assessment (LCA), in accordance with rigorous international standards
Environmentally Preferable Product set by ISO, the leading international standards setting organization. The MicroPro
LCA studies are in compliance with ISO standards 14044 and 14025.
Visit www.GreenApprovedProducts.com
for details. • NAHB Research Center, Green Approved - The Osmose MicroPro technology has
been approved for points toward National Green Building Certification to the ICC
NAHB Approved 700-2008 National Green Building Standard.

GREENGUARD® Certified • GREENGUARD® Certified - The Osmose MicroPro technology has been awarded the
GREENGUARD Children & Schools Certification. GREENGUARD® Children & SchoolsSM
Approved for Aluminum Contact Certification program certifies products for low volatile organic chemical (VOC)
emissions that are used in schools, offices and other sensitive environments.

• Lighter, more natural wood appearance.

• Improved painting and staining qualities.

• Better corrosion resistance for code-approved fasteners and hardware.

• Carbon steel fasteners may be used for interior, above ground, weather-protected
applications such as sill plates, interior framing and interior trusses.

• Approved for aluminum contact.*

• End uses include interior and exterior above ground, ground contact, and fresh
water immersion.

• MicroShades®, innovative micronized pigment color choices - pressure treated
wood colors similar to redwood & cedar.

• Treated wood warranty programs (See warranty for details**).

• Building code compliant. ICC-ES Reports,
ESR-1980 and ESR-2240.

Better Corrosion Protection

MicroPro pressure treated wood products are treated with Micronized Copper Quaternary Compounds or Micronized Copper Azole. MicroPro treated wood products are produced by independently
owned and operated wood treating facilities. MicroPro®, MicroShades®, and Osmose® are registered trademarks of Osmose, Inc. Colors shown in photo images may differ from actual product samples.
“Treated Wood Just Got Greenersm” is a service mark of Osmose, Inc. GREENGUARD® is a registered trademark of GREENGUARD Environmental Institute. © 3/2011 - TP 20-210-SMA-1000000
*See MicroPro Fastener and Hardware Information Sheet. **See MicroPro Residential & Agricultural Limited Warranty for details.

March 2018 www.osmosewood.com 201

LUMBER & MILLWORK

GET THE MOST FROM YOUR BASEMENT DOOR!

• Heavy Duty Steel • All units are painted with
• Galvanized Sill a rust inhibitive primer
• Stainless Steel Hinge ready to be painted
• One Piece Header
Additional sizes available

F 84" 3"
G H

CD Extension Kit Foundation Plates
Exterior Lock
H CD Model

F

Stair Stringer

CD-MODEL

For Existing Flat Foundations and New Construction

HEIGHT24 1/2" HEIGHT 22" HEIGHT 19 1/2" HEIGHT 51"

HEIGHT 30" WID4T5"H LE5N7"GTH WID4T5H" LE6N3G" TH WID4T9H" LE7N1"GTH WID5T3H" 4L2EN1/2G" TH WID4T9H"
LE5N4"GTH

MODEL CD-0 MODEL CD-1 MODEL CD-2 MODEL CD-3 MODEL CD-SL

NOTE: Dimensions shown are outside frame dimensions. Code: GORDONCD3

K HOW TO SELECT DOOR WITH SIDES A=............. C=.............
AB B=............. D=.............
1. Measure dimensions A, B, C, D and K.
C K=.............
D 2. Select length at least 2" longer than “A” and no longer than “B”.

3. Select width at least 4" wider than “C” and no wider than “D”.

4. Check to make sure the height of the model selected is greater
than “K”. The “K” dimension is the distance from the top of the
foundation to the top of basement door opening, not the height of
your old door.

OUTSIDE FRAME DIMENSIONS CD-3 WITH EXTENSIONS*

MODEL CD-SL CD-0 CD-1 CD-2 CD-3 CX-6" CX-12" CX-18" CX-24" CX-30"

LENGTH 421/2" 54" 57" 63" 71" 77" 83" 89" 95" 101"

WIDTH 49" 45" 45" 49" 53" 53" 53" 53" 53" 53"

HEIGHT 51" 30" 241/2" 22" 191/2" 21" 21" 21" 21" 21"

*NOTE: Only CD-3 can be extended. If standard sizes and extensions do not fulfill the foundation Made in USA
requirements please call 800-333-4564 for guidance.

202 March 2018

LUMBER & MILLWORK

GET THE MOST FROM YOUR BASEMENT DOOR!

• Heavy Duty Steel • All units are painted with
• Galvanized Sill a rust inhibitive primer
• Stainless Steel Hinge ready to be painted
• One Piece Header
Additional sizes available

F 84" 3"
G H

RD Extension Header Foundation Plates

H

Exterior Lock F

Stair Stringer

RD Model

RD-MODEL MODEL RD-3

Replacement Doors for Sloping Foundations

MODEL RD-2

MODEL RD-0 MODEL RD-1
LEN73G1T/2H"
LE6N6G1 T/2H"

LEN6G2T"H
LEN4G8T"H

W4ID4 T1/H2" W4ID4 T1/H2"

NOTE: Dimensions shown are outside frame dimensions. W4I8D1T/2H" W5ID2 T1/H2"

HOW TO SELECT A DOOR WITHOUT METAL SIDES

AB 1. Measure dimensions A, B, C and D.

2. Select length at least 2Љ longer than “A” and A=............. C=.............
no longer than “B”. B=............. D=.............

3. Select width at least 4” wider than “C” and
C no wider than “D”.

D

MODEL WIDTH LENGTH WITH 6" WITH 12" WITH 18" IF LONGER
EXTENSION EXTENSION EXTENSION LENGTHS ARE
RD-0 441/2" 48" REQUIRED,
53"-55" 59"-61" NA ORDER FLAT
RD-1 441/2" 62" X1-6 X1-12 STEEL FROM
73"-75" NA THE PLANT
RD-2 481/2" 661/2" 67"-69" X1-12
X1-6 77"-79" NA 96"-98"
RD-3 521/2" 731/2" X2-12 90"-92" X3-24
71"-73" 84"-86" X3-18
X2-6 X3-12

78"-80"
X3-6

OUTSIDE FRAME DIMENSIONS EXTENSION HEADERS ARE NOT INCLUDED
IN DOORS – ORDER SEPARATELY

Made in USA

March 2018 203

LUMBER & MILLWORK

FRAMING BCF28WWM1 F21PL MCN150 RN46-1 FINISH & TRIM
20V MAX* 28° Wire Weld Cordless Plastic Collated Framing Nailer Metal Connector Nailer Coil Roofing Nailer
F28WW Framing Nailer Kit HP118K
Wire Weld Framing Nailer 23 ga. Headless Pinner

28° Wire Collated Stick Nails 28° Wire Collated Stick Nails 21° Plastic Collated Stick Nails 35° Metal Connector Nails 15° Coil Roofing Nails 23 ga. Headless Pin
Available in: Plain, Galvanized, Available in: Plain, Galvanized, Available in: Plain, Galvanized, Available in: Plain, Galvanized, Available in: Galvanized, Available in: Coated
Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
1/2"
2" 2" 2-1/2" 2" 2" 2-1/2" 2" 2" 2-1/2" 3/4" 3/4"
2-1/2" 2-1/2" 3" 2-1/2" 2-1/2" 3" 2-1/2" 2-1/2" 3" 7/8" 1"
3" 3" 3" 1" 1-3/16"
1-1/4"
3-1/4" 3" 3-1/4" 3-1/4" 3" 3-1/4" 3-1/4" 3" 3-1/4" 1-1/2" BCN650D1
1-3/4" 20V MAX* 15 ga. FN Angled
3-1/2" 3-1/4" 3-1/2" 3-1/2" 3-1/4" 3-1/2" 3-1/2" 3-1/4" 3-1/2" 1-1/2" Finish Nailer Kit
BCN680D1
SMOOTH RING SCREW SMOOTH RING SCREW SMOOTH RING SCREW SMOOTH 20V MAX* 18 ga. Brad
Nailer Kit
FINISH & TRIM continued

BTFP72156 BTFP71917 BTFP12233 SX1838K
15 ga. Oil-Free Angled Finish 16 ga. Oil-Free Finish Nailer Kit 18 ga. Oil-Free Brad Nailer Kit 18 ga. Oil-Free Stapler Kit
Nailer Kit

15 ga. Finish Nails 16 ga. Finish Nails 18 ga. Brad Nails 18 ga. Staples
Available in: Coated, Stainless Steel, Available in: Coated Available in: Coated Available in: Coated
Aluminum
1" 5/8" 7/32"
1" 1-1/2" 3/4"
1-1/2" 1-3/4" 1" 1/2"
1-3/4" 2" 1-3/16" 5/8"
2" 2-1/4" 1-1/4" 3/4"
2-1/4" 2-1/2" 1-3/8" 7/8"
2-1/2" 1-1/2" 1"
PN50 1-3/4" 1-1/8"
SPECIALTY Mini Impact Palm Nailer 2" 1-3/16"
1-1/4"
N66C-1 FLOORING 1-3/8"
Coil Siding Nailer 1-1/2"
MIIIFS
Flooring Stapler Kit COMPRESSORS

BTFP02012
6 Gallon 150 PSI
Oil-Free Compressor

DCC2560T1 DWFP55130
FLEXVOLT® 60V MAX* 2.5 Gallon 200 PSI Quiet Trim Compressor
Cordless Air Compressor Kit with
(1) FLEXVOLT® Battery (6.0 Ah)

15° Coil Nail 15-1/2 ga. Staple
Available in: Plain, Galvanized, Available in: Coated
Stainless Steel
1/2"
1-1/4" 1-1/4" 1-1/4"
1-1/2" 1-1/2" 1-1/2" 1/2"
1-3/4" 1-3/4" 1-3/4" 5/8"
1-7/8" 3/4"
2" 2" 2" 7/8"
2-3/16" 2-3/16" 2-3/16" 1"
2-1/2" 2-1/2" 2-1/2" 1-1/8"
1-3/16"
SMOOTH RING SCREW 1-1/4"
1-3/8"
MANUAL FASTENING 1-1/2"

PC2K STCR5019 Staples H30-8D6 STCR5019 Staples T6 SERIES Tacker Staples Sizes
PowerSlam™ PowerCrown® 1/4" PowerCrown® Hammer Tacker 1/4" Heavy Duty Tackers T6-60C2 STCR2619 1/2"
Hammer Tacker 5/16" with Holster 5/16"
3/8" 3/8" T6-8 STCR5019 1/4" 5/16" 3/8" 1/2" 9/16"
T6-80C2 1/2" 9/16"

*Maximum initial battery voltage (measured without a workload) is 20 and 60 volts. Nominal voltage is 18 and 54. 04_JL_P141-212_2018-gk2.indd/RO/GDS/#18-683668

204 www.bostitch.com March 2018

AMparrilc2h0210218 Fastener-to-Tool Cross Reference Guide LUMBER & MILLWORK LUMBER & MILLWORK

BOSTITCH ITEM # SIZE DESCRIPTION BOX QTY MADE TO FIT TOOLS:

FRAMING

28 Degree Wire Weld 2-1/2" Coated .120 Plain Shank 2000 Bostitch Craftsman Campbell Hausfield
3" Coated .120 Plain Shank 2000 18420X N522890
S8D Coated .120 Plain Shank 2000 N79WW, N80SB,
S10D 3-1/4" Galvanized .120 Plain Shank 2000 N86S, N88WW,
S12D 2-1/2" Galvanized .120 Plain Shank 2000 N100S, F28WW
S8DGAL 3-1/4"
S12DGAL Bright .113 Plain Shank 5000
Bright .120 Plain Shank 3000
33 Degree Paper Tape 2-3/8" Bright .131 Plain Shank 2500 Bostitch Dewalt Hitachi Paslode Porter Cable Senco
3" Galvanized .113 Plain Shank 5000 D51823 NR83AA, FC350S
PT-S8D113EP Galvanized .131 Plain Shank 2500 N79PT, NR83AA2 5300S, 5325S, SN2+, SN3,
PT-S10D120EP 3-1/4" N90PT, 5350S, SK312, SN325+, SN4,
PT-S12D131EP 2-3/8" Coated .113 Plain Shank 5000 F33PT Dewalt F350S, IM325, SN70, FramePro
PT-S8D113HDG 3-1/4" Coated .131 Plain Shank 4000 IMCT325, IM350
PT-S12D131HDG Coated .131 Plain Shank 4000 D51845
Galvanized .113 Plain Shank 5000
22 Degree Plastic Collated Galvanized .131 Plain Shank 4000 Bostitch Craftsman Duo Fast Hitachi Makita Paslode Porter Cable Senco
18465
RH-S8D113EP 2-1/2" Coated .120 Plain Shank 2700 N79RH, N88RH, AN922, 5325RHN, FR350, SN60, SN65,
Coated .131 Plain Shank 2700 N88RH-2MCN, Duo Fast AN8300 F350SRH FR350MAG SN65C,
RH-S10D131EP 3" Coated .120 Plain Shank 2700 CNW-75 NR83A, FramePro FRH
N95RHN, NR90AC
RH-S12D131EP 3-1/4" F21PL CN350B

www.bostitch.com RH-S8D113HDG 2-1/2" Bostitch

RH-S12D131HDG 3-1/4" N80CB, N86C,
N89C, N100C
15 Degree Coil 2-1/2" Hitachi Makita Max Paslode Porter Cable Senco
3" NV83A AN901 890C F325C COIL350 SCN65
C8P120D
3-1/4"
C10P131D

C12P120D

ROOFING 1" Galvanized Coil Roofing Nail 7200 Bostitch Craftsman Hitachi Makita Max Paslode Porter Cable Senco StanTech
Galvanized Coil Roofing Nail AN 451 CN12R, CN450R 3175RCU RN175 N134, SDCN 10
15 Degree Coil 1-1/4" Galvanized Coil Roofing Nail 7200 RN45, N12 154400, 18324 NV45AB, NV45AC SCN 200R,
1-1/2" 7200 RN46 SCN40RN
CR2DGAL
CR3DGAL
CR4DGAL

FINISH 1-1/4" Galvanized 15 Gauge Finish 3655 Bostitch Makita StanTech
1-1/2" Galvanized 15 Gauge Finish 3655 AF631 SDN15BR
15 Gauge 'FN' Style Galvanized 15 Gauge Finish 3655 N59FN, N60FN,
2" Galvanized 15 Gauge Finish 3655 N62FNK
FN1520 2-1/2"
FN1524 Coated 15 Gauge Finish 4000
FN1532 Coated 15 Gauge Finish 4000
FN1540 Coated 15 Gauge Finish 4000
Coated 15 Gauge Finish 4000
15 Gauge 'DA' Style 1-1/4" Dewalt Duo Fast Hitachi Porter Cable Senco
1-1/2" Coated 16 Gauge Finish 2500 D51275K NT65AA DA250, CDA250
DA-1520 Coated 16 Gauge Finish 2500 DAFN6432, SFN40, A250FN,
DA-1524 2" Coated 16 Gauge Finish 2500 DAFN6480 Craftsman Air Free 41,
DA-1532 2-1/2" Coated 16 Gauge Finish 2500 18431 Finish Pro 35,
DA-1540 Finish Pro 41XP
Coated 18 Gauge Brad 3000 Dewalt
16 Gauge Straight Finish Nails Coated 18 Gauge Brad 3000 Bostitch Accuset D51238K Dewalt Duo Fast Hitachi Paslode Porter Cable Senco
Coated 18 Gauge Brad 2000 A250SM 3250-F16, Finish Pro 32
SB16-1.25 1-1/4" Coated 18 Gauge Brad 2000 SB1664FN D51256K LFN748 NT65A, IM250 II FN250,
SB16-1.50 1-1/2" FN16250K-2 NT65MA FN250A
SB16-2.00 Senco
SB16-2.50 2"
2-1/2" SLP20

18 Gauge Brads 1" Bostitch Accuset Hitachi Paslode Porter Cable
1-3/8"
BT1309B 1-9/16" BT35B, BT50B, A125BN, NT32AE, IM200-F18, 2138 BN125A,
BT1335B BT125, BT200, A200BN NT50AE F18 II BN200A
BT1340B 2"
BT1350B SB1842BN,
SB-1850BN, SB-2in1

Accuset® - registered trademark of Accuset Products, Inc. / Campbell Hausfield® - registered trademark of Campbell Haufield / Craftsmen® - registered trademark of Sears, Roebuck and Co. / Dewalt® - registered trademark of Dewalt Industrial Tool Company
Duo-Fast® - registered trademark of Duo-Fast Corporation / Hitachi® - registered trademark of Hitachi, Ltd. / Makita® - registered trademark of Makita U.S.A.., Ltd. / Max® - registered trademark of Max Co., Ltd.
Paslode® - registered trademark of Illinios Tool Works, Ltd. / Porter Cable® - registered trademark of Porter-Cable Company / Senco® - registered trademark of Senco Products, Inc.

AD6006 5/05

127015

LUMBER & MILLWORK

Meet Code. Lower Cost.

View a FlatLOK
installation video

FlatLOK is designed for various multi-ply dimensional and

engineered wood applications including LVLs, and multi-ply girder

trusses. ® ttap® Drive System allow you to

of trim or drywall over the fastener.

Approved for single-sided use, the FlatLOK eliminates the need for nails
or through-bolts up to 4-ply applications.

FlatLOK is part of the FastenMaster LOK Line family of structural wood
fastening products. Visit our website to learn more, download technical

206 FastenMaster.com 800·518·3569 March 2018

FastenMaster® and FlatLOK® are trademarks of OMG Inc. Copyright © 2018 OMG, Inc. All rights reserved.

www.fastenmaster.com

LUMBER & MILLWORK

March 2018 207

LUMBER & MILLWORK TruExterior Trim

Pioneering an entirely new category of building materials made with
the revolutionary poly-ash material, Boral TruExterior® Siding & Trim is
the only product available today that addresses both the moisture-

and movement-related issues commonly seen with other exterior
materials on the market.

Moisture Movement

Boral TruExterior® products contain no wood fiber, Boral TruExterior® products offer a high level of dimensional
preventing the moisture-related issues that commonly stability, eliminating many of the movement-related issues
plague wood, wood composites and fiber cement. seen with PVC and vinyl.

 Virtually no moisture cycling  Maintains a high level of dimensional stability†
 No need to prime ends or field cuts  Installation is the same regardless of the season
 Resists rot and termite attacks†  No special precautions or adhesives to control or
 No swelling†
 No cracking or splitting limit movement
 No cupping or checking†  No need for special paints
 Suitable for ground contact  No limitations on paint colors

Nominal Actual STOCK CODE Nominal Actual STOCK CODE
1x3 ¾" x 2 ½" 1316BORAL 1 x 10 ¾" x 9 ¼" 11016BORAL
1x4 ¾" x 3 ½" 1416BORAL 1 x 12 ¾" x 11 ¼" 11216BORAL
1x5 ¾" x 4 ½" 1516BORAL 5/4 x 4 1" x 3 ½" 54416BORAL
1x6 ¾" x 5 ½" 1616BORAL 5/4 x 6 1" x 5 ½" 54616BORAL
1x8 ¾" x 7 ¼" 1816BORAL 5/4 x 8 1" x 7 ¼" 54816BORAL

Ask a Jackson Lumber sales representative for information regarding special order sizes and profiles.

Cut. Fasten. Paint. Done.

Application Fastening

 Designed for use in non-structural applications  Accepts a wide variety of high-quality exterior-
 Suitable for ground contact grade fasteners that are suitable for the local
 Can be used in moisture-prone areas environment

Expansion & Contraction  Can be fastened close to the edge
 No need for pre-drilling
 No special precautions or adhesives are required
to control or limit movement caused by moisture or  No mushrooming
temperature changes Painting

 Traditional exterior-grade caulks, auto-body or  Boral TruExterior® products come pre-primed and
do require paint
wood fillers are all acceptable for filling nail holes
 No need to prime end cuts
Tools  Can be painted with any high-grade exterior paint

 Installed using proven woodworking tools and when following the paint manufacturer's
methods instructions
 Can be painted any color without special
 Carbide-tipped blades and bits are precautions as it is not prone to movement caused
recommended for a longer tool life by heat gain from dark colors†

 Paint lasts longer than on wood because Boral

TruExterior® products cycle virtually no moisture†

208 www.TruExterior.com March 2018

LUMBER & MILLWORK

Customer Name: Date:
Job Name: Phone:
Job Location:
Salesman:
Quote Due Date:
Construction Start Date:

Exterior Walls 2X6 Roofing Shingles IKO
2X4 Ice & Water Shield Tamko
Other 3 Tab
Drip Edge Arch
Precuts No Siding Other
Yes Size:
Trim Grace
Wall Sheathing 1/2" Fir Railing Barrier
7/16" OSB Goldshield
7/16" Zip Wall
Other 8"
Aluminum
Floor System Stick Framed Galv
I Joist Mill
Truss White

Floor Sheathing 3/4" Advantech T&G Clear Clapboard
3/4" Fir T&G Primed Clapboard
3/4" OSB FJ Primed Clapboard
Other Cedar Shakes
HardiPlank
Roof System Stick Framed Vinyl Clapboards
I Joist Vinyl Shakes
Truss Other

Roof Sheathing 1/2" Fir PVC
5/8" Fir FJ Preprimed Pine
1/2" Zip Roof HardiTrim
5/8" Zip Roof Vinyl with Metal Wrap
Other Boral
Other
Decking PT
Composite PT
Other Composite
Other

Additional Notes:

March 2018 209

LUMBER & MILLWORK

2B0O0A3RIDMPFOROTTAANGTEDCAHYAS RT

Board Feet Per Piece

1x2 1x3 1x4 1x5 1x6 1x8 1x10 1x12 1x14 6⁄4x12 6x6 6x8

5⁄4x4 5⁄4x6 5⁄4x8 5⁄4x12 4x4 4x6 4x8 4x10 4x12 6x10 6x12

6⁄4x4 6⁄4x6 6⁄4x8 6⁄4x10 3x6 3x8 3x10 3x12 8x8 8x10 8x12

2x2 2x4 2x6 2x8 2x10 2x12
Length

8' 1.3 2 2.6 3.3 4 5 5.3 6 6.6 8 9.3 10 10.6 12 13.3 16 20 21.3 24 26.6 32 40 42.6 48 53.3 64
10' 1.6 2.5 3.3 4.1 5 6.2 6.6 7.5 8.3 10 11.6 12.5 13.3 15 16.6 20 25 26.6 30 33.3 40 50 53.3 60 66.6 80
12' 2 3 4 5 6 7.5 8 9 10 12 14 15 16 18 20 24 30 32 36 40 48 60 64 72 80 96
14' 2.3 3.5 4.6 5.8 7 8.7 9.3 10.5 11.6 14 16.3 17.5 18.6 21 23.3 28 35 37.3 42 46.6 56 70 74.6 84 93.3 112
16' 2.6 4 5.3 6.6 8 10 10.6 12 13.3 16 18.6 20 21.3 24 26.6 32 40 42.6 48 53.3 64 80 85.3 96 106.6 128
18' 3 4.5 6 7.5 9 11.2 12 13.5 15 18 21 22.5 24 27 30 36 45 48 54 60 72 90 96 108 120 144
20' 3.3 5 6.6 8.3 10 12.5 13.3 15 16.6 20 23.3 25 26.6 30 33.3 40 50 53.3 60 66.6 80 100 106.6 120 133.3 160
22' 3.6 5.5 7.3 9.1 11 13.7 14.6 16.5 18.3 22 25.6 27.5 29.3 33 36.6 44 55 58.6 66 73.3 88 110 117.3 132 146.6 176
24' 4 6 8 10 12 15 16 18 20 24 28 30 32 36 40 48 60 64 72 80 96 120 128 144 160 192

BOARD FEET CONVERSIONS

The basic unit of measure for lumber cut from a log is the board foot. A board foot contains 144 cubic inches of volume.
It is generally easiest to compare any piece of lumber to a board foot of lumber measuring one (1) inch thick, twelve (12) inches wide and
one (1) foot long.
Lumber under one (1) inch thick is generally considered the same as one (1) inch thick for estimating purposes. To calculate the BOARD
FEET in a given piece or amount of lumber, use the formula:

To convert linear feet to board feet: To convert board feet to linear feet:
T" x W" x L' = Bd. ft. 12 x Bd. ft = Linear
12
T" x W"

DIMENSION LUMBER GRADE STAMPS

Grades and Uses Lumber is stamped with a grademark to show its grade.
The American Lumber Standard Board of Review sets
Nominal Size (in) Grade Grade Mix 1 Principal Uses the standards and quali es grading agencies. Each
No. 2 & Better grade stamp shows the name or symbol of the agency,
2 to 4" thick Select Structural (No. 2 & Btr.) Used in most construction. High strength, the number of the mill, the species group, the grade
2" and wider No. 1 stiffness, good appearance. Preferred for and the classi cation S-DRY or S-GRN.
No. 2 –––––––––– trusses, rafters and joists. S-DRY indicates that the lumber has a moisture content
of 19% or less after being kiln dried.
No. 3 Standard Used when high strength and appearance S-GRN has a moisture content greater than 19%.
& Better are not important. The following is a facsimile of a grade stamp.
2 to 4" thick Construction (Std. & Btr.)
2 to 4" wide (Std. & Btr.) Common mix used in general framing.
–––––––––– Has less strength and shorter spans than
2 to 4" wide Utility No. 2 & Btr. structural light framing.

2 to 6" wide Economy Stud –––––––––– Used most where high strength is not
(Design values not assigned) –––––––––– important - studs & plates in partition
–––––––––– walls, blocking and braces.
Stud
Temporary or low cost construction where
Economy Stud strength and appearance are not important.
(Design values not assigned)
Most common grade used for studs.

Used most economically where high
strength is not important.

1. For ease in grade sorting, the higher grades are combined and sold a. WWPA Certification Mark: Certi es Association quality
as a grade mix. Pieces in the grade mix are still individually grade supervision. is a registered trademark.
stamped.
For additional information on wood species used in construction, visit the b. Mill Identification: Firm name, brand or assigned mill
Canadian Wood Council @ www.cwc.ca, the Southern Pine Marketing number. WWPA can be contacted to identify an
Council @www.southernpine.com or the Western Wood Products individual mill whenever necessary.
Association @www.wwpa.org
c. Grade Designation: Grade name, number or abbreviation.

d. Species Identification: Indicates species by individual
species or species combination.

e. Condition Of Seasoning: Indicates condition of
seasoning at time of surfacing
MC-15 - 15% maximum moisture content
S-DRY - 19% maximum moisture content
S-GRN - over 19% moisture content (unseasoned)

210 Publisher is not liable for errors or omissions in this book. Always check your local building codes. March 2018

Concrete Specifications

CONCRETELUMBER & MILLWORK SPECIFICATIONS

Redi-Mix Concrete

Number of 60 Lb. and 80 Lb. bags of redi-mix concrete to set posts and poles.

DEPTH OF DIAMETER OF HOLE
HOLE
6" Hole 8" Hole 10" Hole 12" Hole
12"
18" 60 Lb. 80 Lb. 60 Lb. 80 Lb. 60 Lb. 80 Lb. 60 Lb. 80 Lb.
24" 1/2 2/3 3/4 2/3 11⁄4 1 13⁄4 11⁄3
30" 2/3 1/2 11⁄4 1 11⁄2 22⁄3 2
36" 1 2/3 11⁄2 11⁄4 2 31⁄2 22⁄3
42" 11⁄4 1 2 11⁄2 21⁄2 2 41⁄2 31⁄2
11⁄2 1 21⁄3 13⁄4 3 21⁄2 51⁄4 4
12⁄3 11⁄4 23⁄4 2 32⁄3 61⁄4 42⁄3
41⁄4 3
31⁄4

Number of 60 Lb. and 80 Lb. bags of redi-mix concrete required to pour a concrete slab.

SLAB SQUARE FOOT AREA
THICKNESS

1' 2' 3' 5' 10'

60 Lb. 80 Lb. 60 Lb. 80 Lb. 60 Lb. 80 Lb. 60 Lb. 80 Lb. 60 Lb. 80 Lb.
1 1/2 11⁄2 1 2 2 4 3 8 6
4"
6" 1 1 2 2 31⁄2 3 6 4 12 9

SLAB SQUARE FOOT AREA
THICKNESS

15' 20' 30' 40' 50'

60 Lb. 80 Lb. 60 Lb. 80 Lb. 60 Lb. 80 Lb. 60 Lb. 80 Lb. 60 Lb. 80 Lb.
4" 12 9 15 12 23 17 30 23 38 28
6" 17 13 23 17 34 25 45 34 56 42

Mortar Mix Sand Mix
Blocks: One 60 lb. bag for 20 blocks; One 80 lb. bag for 27 blocks.60 lb. bag yields 6 square feet x 1" deep.
Bricks: One 60 lb. bag for 48 bricks; One 80 lb. bag for 65 bricks. 80 lb. bag yields 8 square feet x 1" deep.

MORTAR MIXES FOR CONCRETE BLOCK WORK*

Applicat ion Cement Hydrat ed Lime Mort ar Sand
(measured in damp, loose condition)

Routine Projects 1 part of masonry cement None 2-3
or 1 - 1 1/4 4-6

1 part of portland cement 0 - 1/4 2-3

Projects subject to 1 part of masonry cement and
extremely heavy loads, 1 part of portland cement
severe frost action,
earthquakes, violent or
winds; also for isolated piers. 1 part of portland cement

* All proportions measured by volume.

How To Estimate Materials For 100 Square Feet Of Concrete Of Various Thicknesses

Thickness of Amount of 1: 1 3/4:2 mix Aggregate Proportions 1:2 1/4:3 mix Aggregate 1:2 3/4:4 mix Aggregate
concrete in concrete
cubic yard Cement, Fine, Coarse Cement, Fine, Coarse Cement, Fine, Coarse
inches
3 0.92 bags cu. ft. cu. ft. bags cu. ft. cu. ft. bags cu. ft. cu. ft.
4 1.24 7.5 12.9 14.7 5.8 12.9 17.5 4.6 12.9 18.4
5 1.56 10.0 17.3 19.9 7.8 17.3 23.6
6 1.85 12.5 21.9 25.9 9.8 21.7 29.6 6.2 17.3 24.8
8 2.46 7.8 21.8 31.2
10 3.08 15.0 25.8 29.4 11.5 26.0 35.2 9.3 26.0 37.0
12 3.70 20.0 34.6 39.8 15.4 34.4 46.8
25.0 43.8 50.0 19.3 43.2 58.5 12.3 34.4 49.3
15.4 43.2 61.6
30.0 51.6 58.8 23.1 51.8 70.4 18.5 51.8 74.0

Publisher is not liable for errors or omissions in this book. Always check your local building codes. 211
March 2018

Estimating Siding & Accessories

LUMBEERS&TMIMILLWAOTRIKNG SIDING & ACCESSORIES

Estimating Sidewalls

1. Determine the total square footage of each side of the home and add together.
2. Determine square footage of all doors and windows; add together and subtract

from total 1 above.
3. Add 10% to account for waste.

Estimating Gable End

Height x 1/2 Width = Total Sq. Ft.
Example: Height (4') x 1/2 Width (28') = 56 Sq. Ft.

GABLE END

Estimating A Dormer

1/2 Height x Width = Sq. Ft. Of One Side
2 x Sq. Ft. Of One Side = Sq. Ft. Of Dormer
Example: 1/2 Height (4') x Width (6') = 12 Sq. Ft.
Example: 2 x 12 Sq. Ft.

DORMER

Quick Estimating Guide for Vinyl Siding Accessories

11. Starter Strip – Perimeter of the house divided by 10.
12. Outside Corner Posts – One per outside corner of home for each story.
13. Inside Corner Posts – One per inside corner for each story and two for each chimney

per story.
14. J Channel

a) 2 pieces per window and door smaller than 6' x 5'.
b) 3 pieces per window and door larger than 6' x 5'.
c) 4 pieces per gable end.
15. Utility/Sill Trim – Top of walls under overhang plus under windows.
Divide by 12 for number of pieces.
16. Soffit – Length x width of home divided by 100. Figure 25% to be vented.
17. F Channel – Total length of overhang divided by 12. (Some applications may use J-channel.)
18. Fascia – Measure fascia around entire house and divide by 12.
19. Nails – Total square footage of the siding x .01.

Publisher is not liable for errors or omissions in this book. Always check your local building codes.
212 March 2018

LUMBER & MILLWORK

Rafter Length Table

Inch 21 FEET Inch 22 FEET Inch 23 FEET Inch 24 FEET
Rise Rise Rise Rise
Com ft Hip Com ft Hip Com ft Hip Com ft Hip
1 ft inches inches 1 ft inches inches 1 ft inches inches 1 ft inches inches
2 10 1/2 2 7 2 3 1/2 2 0
3 10 6 3/8 14 11 3/8 3 11 1/2 15 8 3 11 6 1/2 16 4 1/2 3 12 1/2 17 1 1/8
4 1 4 9 1/2 4 6 1/8 4 2 3/4
5 10 7 3/4 14 3 1/8 5 11 1 3/4 15 11 7/8 5 11 7 7/8 16 8 5/8 5 12 1 7/8 17 5 1/4
6 5 7/8 6 2 3/4 6 11 5/8 6 8 3/8
7 10 10 15 9 7 11 4 1/8 15 6 7 11 10 3/8 16 3 7 12 4 1/2 17 0
8 3/4 8 10 8 7 1/8 8 4 3/8
9 11 7/8 15 5 9 11 7 1/8 15 2 3/8 9 12 1 1/2 16 11 3/4 9 12 7 3/4 17 9 1/8
10 9 3/4 10 7 3/8 10 5 10 2 1/2
11 11 4 1/2 15 2 7/8 11 11 11 16 3/4 11 12 5 1/2 16 10 5/8 11 13 0 17 8 3/8
12 8 3/8 12 6 1/2 12 4 5/8 12 2 5/8
13 11 9 15 2 1/4 13 12 3 5/8 16 5/8 13 12 10 3/8 17 11 13 13 5 18 9 3/8
14 8 7/16 14 7 1/8 14 5 13/16 14 4 1/2
12 2 16 3 12 8 7/8 16 2 13 3 7/8 17 1 13 10 3/4 18 0
Inch
Rise 12 7 1/2 16 13 2 5/8 17 13 9 7/8 17 14 5 18

1 13 1 1/2 16 13 9 17 14 4 1/2 18 15 0 19
2
3 13 8 17 14 3 7/8 18 14 11 3/4 18 15 7 1/2 19
4
5 14 3 17 14 11 1/8 18 15 7 1/4 19 16 3 3/8 20
6
7 14 10 3/16 18 15 6 11/16 19 16 3 1/8 19 16 11 5/8 20
8
9 15 5 3/4 18 16 2 5/8 19 16 11 7/16 20 17 8 5/16 21
10
11 16 1 5/8 19 16 10 13/16 20 17 8 1/16 21 18 5 1/4 22
12
13 25 FEET Inch 26 FEET Inch 27 FEET Inch 28 FEET
14 Rise Rise Rise
Com ft Hip Com ft Hip Com ft Hip Com ft Hip
Inch ft inches inches 1 ft inches inches 1 ft inches inches 1 ft inches inches
Rise 8 1/2 2 5 2 1 1/2 2 10
12 6 1/2 17 9 5/8 3 13 1/2 18 6 1/4 3 13 6 1/2 13 2 3/4 3 14 5/8 19 11 1/4
1 11 3/8 4 8 4 4 5/8 4 1 1/4
2 12 8 17 2 5 13 2 1/8 18 10 3/4 5 13 8 1/4 13 7 1/2 5 14 2 1/4 19 4 1/8
3 5 1/4 6 2 1/8 6 11 6 7 7/8
4 12 10 5/8 17 9 7 13 4 7/8 18 6 7 13 11 13 3 7 14 5 1/4 20 0
5 1 1/2 8 10 5/8 8 7 3/4 8 5
6 13 2 1/8 18 6 1/2 9 13 8 1/2 18 3 7/8 9 14 2 7/8 14 1 1/8 9 14 9 1/8 20 10 5/8
7 1/8 10 9 3/4 10 7 3/8 10 5
8 13 6 1/2 18 6 1/4 11 14 1 19 4 1/16 11 14 7 1/2 14 2 11 15 2 20 11 7/8
9 13/16 12 10 15/16 12 9 12 7 1/8
10 13 11 3/4 18 7 13/16 13 14 6 1/2 19 6 3/16 13 15 1 15 4 1/2 13 15 7 7/8 21 3
11 3 1/4 14 1 15/16 14 5/8 14 11 5/16
12 14 5 3/4 19 11 15 3/4 19 6 7/16 15 7 3/4 15 9 16 2 5/8 21 8
13
14 15 1/4 19 15 7 1/2 20 16 2 3/4 16 16 9 7/8 21

Inch 15 7 1/2 20 16 3 20 16 10 1/2 16 17 6 22
Rise
16 3 1/4 20 16 11 11/16 21 17 7 17 18 2 5/8 22
1
2 16 11 1/2 21 17 7 5/8 21 18 3 3/4 18 18 11 7/8 23
3
4 17 8 1/8 21 18 4 5/8 22 19 1 1/8 19 19 9 5/8 24
5
6 18 5 1/8 22 19 2 23 19 10 13/16 19 20 7 11/16 24
7
8 19 2 1/2 22 19 11 11/16 23 20 8 15/16 20 21 6 1/8 25
9
10 29 FEET Inch 30 FEET Inch 31 FEET Inch 32 FEET
11 Rise Rise Rise
12 Com ft Hip Com ft Hip Com ft Hip Com ft Hip
13 ft inches inches 1 ft inches inches 1 ft inches inches 1 ft inches inches
14 6 1/2 2 3 2 11 1/2 2 8
14 6 5/8 20 7 3/4 3 15 5/8 21 4 3/8 3 15 6 5/8 21 7/8 3 16 5/8 22 9 1/2
9 7/8 4 6 1/2 4 3 1/8 4 11 5/8
14 8 3/8 20 7/8 5 15 2 3/8 21 9 5/8 5 15 8 1/2 22 6 3/8 5 16 2 1/2 22 3
4 3/4 6 1 1/2 6 10 3/8 6 7 1/4
14 11 1/2 20 9 7 15 5 1/2 21 6 7 15 11 5/8 22 3 7 16 5 7/8 22 0
2 1/8 8 11 3/8 8 8 1/2 8 5 3/4
15 3 1/2 21 8 9 15 9 3/4 21 5 3/8 9 16 4 1/8 22 2 3/4 9 16 10 3/8 23 1/8
2 5/8 10 1/8 10 9 3/4 10 7 3/8
15 8 1/2 21 9 3/4 11 16 3 22 7 1/2 11 16 9 1/2 22 5 3/8 11 17 4 23 3 1/4
5 1/4 12 3 3/8 12 1 1/2 12 11 5/8
16 2 5/8 21 1 3/8 13 16 9 1/4 22 11 3/4 13 17 4 23 10 1/8 13 17 10 5/8 24 8 1/2
10 14 8 11/16 14 7 3/8 14 6 1/16
16 9 5/8 22 7 17 4 1/2 22 6 17 11 1/2 23 5 18 6 3/8 24 4

17 5 1/8 22 18 3/8 23 18 7 5/8 24 19 2 3/4 25

18 1 1/2 23 18 9 24 19 4 1/2 24 20 0 25

18 10 3/8 23 19 6 3/8 24 20 2 1/4 25 20 10 26

19 8 24 20 4 1/4 25 21 3/8 26 21 8 1/2 26

20 6 1/16 25 21 2 9/16 25 21 11 26 22 7 1/2 27

21 4 1/2 25 22 1 3/8 26 22 1 1/4 27 23 7 1/16 28

22 3 3/8 26 23 9/16 27 23 9 13/16 28 24 7 29

33 FEET Inch 34 FEET Inch 35 FEET Inch 36 FEET
Rise Rise Rise
Com ft Hip Com ft Hip Com ft Hip Com ft Hip
ft inches inches 1 ft inches inches 1 ft inches inches 1 ft inches inches
4 1/2 2 1 2 9 1/2 2 6
16 6 5/8 23 6 3 17 3/4 24 2 1/2 3 17 6 3/4 24 11 3 18 3/4 25 7 5/8
8 1/4 4 4 7/8 4 1 1/2 4 10 1/8
16 8 3/8 23 11 3/4 5 17 2 3/4 24 8 1/2 5 17 8 7/8 24 5 1/4 5 18 2 7/8 25 1 7/8
4 1/8 6 7/8 6 9 3/4 6 6 5/8
17 0 23 9 7 17 6 1/4 24 6 7 18 1/2 25 3 7 18 6 5/8 25 0
2 7/8 8 1/8 8 10 1/4 8 6 1/2
17 4 3/4 23 9 1/2 9 17 11 24 6 7/8 9 18 5 3/8 25 4 1/4 9 18 11 7/8 26 1 5/8
5 10 2 5/8 10 1/4 10 9 3/4
17 10 1/2 24 1 1/8 11 18 5 25 10 7/8 11 18 11 1/2 25 8 3/4 11 19 6 26 6 5/8
9 3/4 12 7 3/4 12 5 7/8 12 4
18 5 5/8 24 6 7/8 13 19 1/8 25 5 1/4 13 19 6 7/8 26 3 5/8 13 20 1 1/2 27 2
4 5/8 14 3 1/4 14 1 7/8 14 5/8
19 1 3/8 25 3 19 8 3/8 26 2 20 3 3/8 26 1 20 10 1/4 27 0

19 10 25 20 5 1/8 26 21 3/8 27 21 7 1/2 28

20 7 1/2 26 21 3 27 21 10 1/2 28 22 6 28

21 5 7/8 27 22 1 1/2 27 22 9 3/8 28 23 5 1/8 29

22 4 5/8 27 23 7/8 28 23 8 7/8 29 24 5 30

23 4 28 24 1/2 29 24 9 30 25 5 1/2 31

24 4 1/2 29 25 7/8 30 25 9 3/4 31 26 6 5/8 32

25 4 1/4 30 26 1 1/2 31 26 10 3/4 32 27 7 7/8 33

March 2018 213

Serving commercial contractors, home builders,
and remodelers in southern New Hampshire
and northeastern Massachusetts for 72 years.

Jackson Lumber

Raymond NH

Jackson Lumber

Amesbury MA

Jackson Lumber Jackson
Kitchen Designs
Lawrence MA
N. Andover

Jackson Lumber

Woburn MA

Five Convenient Locations To Serve You:

LAWRENCE, MA ∙ NORTH ANDOVER, MA
AMESBURY, MA ∙ WOBURN, MA ∙ RAYMOND, NH

Stop by our showroom in Lawrence or Amesbury
& check out our great selection of

carpeting, hardwood flooring, ceramic tile and
luxury vinyl tiles.

WOOD ∙ CARPETING ∙ TILE

Installation Services Available

We are happy to help your customers
with their flooring selections.

LUMBER & MILLWORK

Builders Have Great Success Partnering
with Jackson Kitchen Designs

Learn How We Can
Make the Kitchen
Design Process
Easy for You and
Your Customer

“Jackson Kitchen Designs John Dennis,
did a SPECTACULAR job Radio Personality
on our new kitchen!”

“The staff answered all

step of the way, and
even solved a couple of

And, just like they
promised, everything

within budget.”

Contact Lisa Torrisi, Kitchen Manager, at 978-689-1090
or [email protected]

to discuss your project and get started with a designer.

KITCHEN DESIGNS

Butcher Boy Marketplace at Jackson Lumber & Millwork
1093 Osgood Street, Rt. 125 67 Haverhill Road, Rt. 110
Amesbury, MA
North Andover, MA 978-689-1016
978-685-7770

www.jacksonkitchendesigns.com