Jackson Lumber & Millwork Catalog

Custom MDF Wainscoting

3.65" 3 1/2" casng = 6 3/4" from IS face of ext jamb to edge of raised panel 47.08"

4.25"
3.65"

8.20"

36.45" 3.65" 4.25"
4.25"

3.65"

Where to measure

• Inside corners - measure from stud • What is the desired top of chair rail height
• Outside corners - measure to stud • What is the desired overlap of baseboard onto the paneling
• Window width - measure from stud to inside of side • What is the desired overlap of chair rail onto the paneling
• Typical inside corners are figured with a 3 1/2" stile
extension jamb • Typical outside corners are figured with a
• Window w/ stool cap - meaasure from rough floor to bottom
3" stile plus 4" for trimming
of stool cap
• Window w/ picture frame - measure from rough floor to top

of sill extension jamb

seam detail in paneling over 144" long 3 1/2" casing = 5 1/2" from stud RO to edge of raised panel
2 1/2" casing = 4 1/2"

4.25"

Raised Classic Raised Flat Classic Flat 4.86"Craftsman Shaker

4.25"

3-5/8" 6.68"

47.08"

4-7/8"

8.81"

3"

3" measure S.R. to S.R. + panel thickness + desired OSC scribe
inside corner - draw stile to desired width + panel thickness
outside corner - draw stile desire width plus desired OSC scribe

3" 3 1/2"
3"

3"

3 5/8"
3 5/8"
3"

3"
3"

March 2018 97

Custom Curved Casings

Half Round Full Round Quarter Round

Radius Radius Radius
Diameter
Diameter 4" extended straights
Inside radius of casing is required - no templates
4" extended straights
Inside radius of casing is required - no templates

Segment Inside radius of casing is required - no templates

C width

m Full Oval
Height

Shoulder Height

Radius

radius = (C2 /8m)+(m/2)
Inside radius of casing is required - no templates
Straights are ordered seperatly

Elliptical

4" extended straights Template Required
Template Required

PVC Code: CC Wood Code: CCW
••PVC is the most cost effective material ••Casings made from wood will be multiple piec-
••One solid piece, heated and shaped into desired es assembled as one
radius. PVC is then run through a shaper to get ••Available in Pine, Oak, Poplar, Sapele, Cherry
desired profile. ••All profiles are cut to shape and run through a
••3 ½ Windsor & 2 ½ Colonial are stock profiles that shaper
are heated and bent to desired radius ••Profiled circles and ovals are shipped in two
••All other profiles are run through a shaper pieces
••Molded profiles of circles and ovals are shipped
in two pieces Medium Density Fiberboard (MDF) Code: CCM
••Flat ovals and circles are shipped as one piece, ••MDF is a superior paint grade product
made from sheet stock ••All profiles are cut to shape and run through a
••Straight lengths are available for an exact match shaper to desired profile
to curved casing profile ••Casings are made from one sheet if possible
••Some profiles have a minimum radius ••Molded profiles of circles and ovals are shipped
in two pieces
••Flat ovals and circles are shipped as one piece,
made from sheet stock
••Straight lengths are available for an exact
match to curved casing profile

98 March 2018

Custom Cased Openings

Template
required

Width Width
Height
Height Shoulder Height
Shoulder

Width

Segment Half Round Elliptical

Code- PCO Features:

• Available in a variety of wood species.
• Available in paint grade PVC.
• Available in all casing profiles.
• Rough opening dimensions required.

C Custom Curved Nosing & Hand Rail
For Balcony or Step/Platform
Handrail Radius
is to center of rail Specify Wood Species

Floor Balcony Nosing Inside Radius Step/Platform
Scotia X Scotia
Subfloor Riser
Skirt X
Outside Radius 99
Skirt Mould
Sheet Rock

March 2018

JACKSON NUMBERING SYSTEM = FJP = Primed Poplar
Type = CLEAR P = Poplar
1 = Crown Moulding #
Mouldings 2 = Casing Width M = MDF
CASING 3 = Chair Type

4 = Base 8710 CASING M J2210 = FJP + CLEAR
5 = Misc. WM351 SHADED = IN STOCK
6 = Stool
/11 16 x 21/2

8730 CASING J2230 3 1/2" BACKBAND CASING J2303
WM315 312BBCASFJP
/11 16 x 3 3/8
/11 16 x 21/2 CR373 CRAFTSMAN J2373
/11 16 x 31/2

8627 CASING J2227 8754 CASING 8308 2 ROUND CORNER CASING
WM472 WM444 WM412
17/32 x 51/2 J2354 J2308
9/16 x 21/2 /11 16 x 31/2

/11 16 x 31/2

8725 CASING J2225
/11 16 x 21/2

8753 CASING 3 1/2 JALCO CASING J2300 CR370 HARBOR CLASSIC 3.5” CASING J2370
WM361 /11 16 x 33/8 J2390 3/4 x 31/2

J2253

J2500 Craftsman Head Casing /11 16 x 21/2

8710 CASING CR390 VICTORIAN CASING WOCS007 J2307
WM351 3/4 x 35/16 3/4 x 31/2
M J2210

/11 16 x 21/2

2 1/2 JALCO CASING J2200 3 1/2" Very Square Casing J2302 B225 MARBLEHEAD CASING J2325
/11 16 x 21/2 312VSCASFJP /11 16 x 31/2

/11 16 x 31/2

CR398 J2208

HARBOR CLASSIC 2.5" CASING

3/4 x 21/2 EXOTICA CASING J2394 B200 WINDSOR CASING J2320
11/16 x 31/2 11/16 x 31/2

WOCS005 J2405 CR392 ADAM CASING J2492
13/16 x 43/8 J2401
J2469 3/4 x 41/2
CR369 ANDOVER CASING J2400
11/16 x 41/8 FLUTED CASING 8’ only
1 x 41/2
B100 BELLY BAND CASING
/11 16 x 41/4

CR391 HARBOR CLASSIC 4.5" CASING J2491 CR393 QUEEN ANNE CASING J2593
3/4 x 5
3/4 x 41/2

APRON BACK BAND GLASS BEAD PANEL WALLBOARD
and TILE BOARD
J3342 J5672
J3269
J3245 CR304 TORUS CR303 REVIVAL J5590 P
BACK BAND BACK BAND
J5104 J5103 J5000 PANEL MOLD J5100 J5451 J5161
8590 B672 HARBOR BEAD
8642 APRON 15/16 x /13 16 3/8 x 1/2 3/8 x 7/8 5/8” x 3/4” 8451 8161
1269 APRON 7/16 x 11/8 3/8 x 1
8645 APRON 19/16 x 11/8 8767 SCREEN STOCK
J5767 8138 PANEL
9/16 x 11/2 WM978 J5138
/11 16 x 13/4
5/8 x 21/2 5/8 x 21/2 B636 PANEL 3/8 x 13/4

J5736

5/8 x 21/4

5/8 x 31/2 March 2018

100

JACKSON NUMBERING SYSTEM = FJP = Primed Poplar
Type = CLEAR P = Poplar
1 = Crown Moulding #
Mouldings 2 = Casing Width M = MDF
3 = Chair Type = FJP + CLEAR
SHADED = IN STOCK
4 = Base 8710 CASING M J2210
5 = Misc. WM351
6 = Stool
/11 16 x 21/2

STOP Craftman Stop BALUSTER STOCK OAK NOSING
7/16 x 11/16
8096 STOP J5196 15/8 8902 WM236
3/8 x 15/16 J5101 15/16 8901 WM237
WOST004 11/16 8900 WM238 OAK NOSING
1/2 x 17/8
8120 STOP J5120 3/4 x 41/4 J6400
3/8 x 15/8 J5004

8093A STOP 3/8 x 21/2 J5900 OAK NOSING
J5293 J5901
J5902

3/4 x 51/2 J6501

8093C STOP 3/8 x 35/8 J5393

8093B STOP 3/8 x 41/4 J5493

STOOL CAP PPNOSING134
/11 16 x 13/4
1275 STOOL CAP /11 16 x 2 PP1279STOOL 3/4" x 31/4"
J6134
for Andersen 400 Series For Andersen Casement
PP134BN1
Tilt-Wash 49/16 Wall J6379
1 x 13/4
49/16 Wall J6275 J6135

PP1276 STOOL CAP /11 16 x 4 PP1280STOOL 3/4" x 51/4"

for Andersen 400 Series Tilt-Wash For Andersen Casement

69/16 Wall J6476 69/16 Wall J6580

PP1276BN1 1" X 4" PP1280BN1 1" X 51/2" 1273 STOOL CAP /11 16 x 33/16

for Andersen 400 Series Tilt-Wash For Andersen Casement J6581 Andersen 200 Series Tilt-Wash

65/8 Wall (49/16 Wall) J6373

69/16 Wall J6477

PPNOSING714 J6714 1274 STOOL CAP /11 16 x 53/16
3/4 x 71/4 Primed Poplar Nosing
J6574

1268B STOOL CAP 1268A STOOL CAP /11 16 x 31/2 8669B STOOL CAP /11 16 x 41/4
LWM156 /11 16 x 2 1/4 J6368
J6469
J6268
STAFF BEAD
M
BASE 908 STAFF BEAD WM133
WM180 ASTRAGAL (Flat)

BRICKMOULD /11 16 x 13/4
J5171
11/4 x 2

B691 STAFF
BEAD

J2280 13/8 x 15/8
J5691

9/16 x 71/4 M
BASE714SFJP
9/16 x 51/2 5/8 x 51/4
BASE512VSFJP
5/8 x 6 CR378 HARBOR CLASSIC 5.25” BASE CR383 PARSONAGE BASE 3/4 x 41/2
J4578 J4483
9/16 x 7 1/4 CR380 KINGS POINT 6” BASE 5 1/2" VERY SQUARE BASE 9/16 x 51/4 3/4 x 41/2 J4485 9/16 x 41/4 9/16 x 41/4 J4312 J4385 J4320
J4680 J4501 J4412
7 1/4" SQUARE BASE LGM 57 BASE BOARD B400 SPEED BASE CR384 MECOX BASE 8385B BASE 9/16 x 41/2 4 1/4" SPEED BASE B688 BASE 9/16 x 41/4 8712 BASE 9/16 x 31/2 8385A BASE 9/16 x 31/2 8720 BASE 9/16 x 31/2
J4701 J4700 J4500 J4484 WM660 J4400 8712B BASE J4488 WM622 WM662 WM712
WM620

March 2018 101

JACKSON NUMBERING SYSTEM = FJP = Primed Poplar
Type = CLEAR P = Poplar
1 = Crown Moulding #
Mouldings 2 = Casing Width M = MDF
3 = Chair Type = FJP + CLEAR
SHADED = IN STOCK
4 = Base 8710 CASING M J2210
5 = Misc. WM351
6 = Stool
/11 16 x 21/2

CROWN
APPROXIMATE COVERAGES

CEILING 4 1/4” 3 5/8” 35/8” 31/8” 31/2” 31/8” 3” 21/2”
WALL 4 1/2” 3 5/8” 33/4” 33/8” 3” 31/4” 31/2” 31/8”

CR399 CHRA3R9B6OVRICCTLAOSRISIACNCCRROOWWNN WOCM005 WOCM006 W8M04173 CROWN 8006 CROWN
8027 CROWN 8005 CROWN
J1416
J1415
J1405
3/4 x 49/16 J1413 J1406

J1596 /11 16 x 41/4
J1527

3/4 x 49/16 9/16 x 45/8 /11 16 x 45/8
CEILING
J1699 WALL APPROXIMATE COVERAGES

3/4 x 51/8 /11 16 x 51/4 3” 2” 31/8” 2” 15/8” 15/8”
25/8” 3” 27/8” 3” 21/8” 21/8”

1 1/16 x 61/8 COVE

APPROXIMATE COVERAGES W8M05120 CROWN

CEILING 11/8” 13/8” 17/8” WOCMJ1040044 LW80M0499 CROWN 8003 CROWN
WALL 11/4” 13/4” 2” 8002 CROWN
WOCM001
802J411C24OVE WM85 8025 CJO1V22E5 8026 CJO1V22E6 J1210 J1203

J1309 9/16 x 23/4 9/16 x 23/4
J1302
9/16 x 13/4 J1301

/11 16 x 21/4 11/16 x 4 CORNICE

9/16 x 35/8 9/6 x 35/8 APPROXIMATE COVERAGES

/11 16 x 23/4 CEILING 1” 11/2” 21/4”
WALL 13/8” 15/8” 23/8”
SOLID CROWN 3/4 x 39/16

APPROXIMATE COVERAGES J11826222 CORNICE
J13826323 CORNICE
CEILING 15/8” 13/16” 1 1/16” 13/8” 862J142C2O4 RNICE
WALL 17/16” 2 1/2” 23/4”
21/4” 9/16 x 13/4
8047 CROWN CR397 9/16 x 21/4
WOCH001 CROWN J1247 EMPIRE CROWN
J1201
610 J1297
J1110

13/16 x 17/16 BED 9/16 x 31/4
APPROXIMATE COVERAGES
21/4” 13/8”
15/16” CEILING 1” 1” 11/4” 11/8”
WALL 1” 13/8” 17/8”
WOHC001
15/8 x 21/4 J1101 11/16 x 2 1/2 801J71B11ED7W 8M07146 BED
13/8 x 23/4 W 8M0718 BED J1116
8019 BED J1218

J1219
9/16 x 11/2
102 21/4 x 15/16 9/16 x 13/4 9/16 x 23/4 March 2018

9/16 x 21/4

JACKSON NUMBERING SYSTEM = FJP = Primed Poplar
Type = CLEAR P = Poplar
1 = Crown Moulding #
Mouldings 2 = Casing Width M = MDF
3 = Chair Type = FJP + CLEAR
SHADED = IN STOCK
4 = Base 8710 CASING M J2210
5 = Misc. WM351
6 = Stool
/11 16 x 21/2

BASE MOULD J4387 CHAIR RAIL

J4665B665 J4455 J4388 11 16/ x 31/2 8630 CHAIR RAIL 11 16/ x 25/8 9/16 x 21/2 CR305 NEW BURNSWICK
B658 J4658 J3230 J2227 CHAIR RAIL
8453 J4453 J4001 WM300 CHAIR RAIL 11/16 x 3
8455 J3300 J3205
WM163 8308 2 ROUND CORNER CHAIR RAIL J2308 8627 CHAIR RAIL
C388 NEWPORT WM472

BASE CAP
B660 J4660

CR387 SCOTIA
BASE CAP

WOSP001

1/2 x 3/4 9/16 x 1 /11 16 x 11/8 /11 16 x 13/8 3/4 x 13/8 /11 16 x 11/2 /11 16 x 13/4 7/8 x 11/4

QUARTER ROUND J5167
J5766

J5564 J5365

J5358 J5163

J5057 /11 16 x 13/8 5/8 x 21/2

1/4 3/8 1/2 5/8 3/4 7/8 WM412
8057 8058
WM110 WM109 8063 8064 8065 8066 8067 BAND
WM108 WM107 WM105 WM104
J5070 J5076 J5465
HALF ROUND J5080
J5079 J5463
J5078

J5077 J5608 J5462

8070 8076 8077 8078 8079 8080 B608 BAND
WM120 5/8 x 11/4 /11 16 x 15/8 8462 BAND
WM124 WM123 WM122 1/2 x 1 8463 BAND
1/4 x 1/2 5/16 x 5/8 3/8 x /11 16 SCREEN STOP 8465 BAND
J5061
SCOTIA 8061 7/16 x 11/16 /11 16 x 11/8 /11 16 x 11/2 /11 16 x 13/4
White Oak WM94 /11 16 x 11/4 /11 16 x 11/2 /11 16 x 13/4 /11 16 x 21/2

Maple SCOTIA

J5059 Oak J5059 8140 8610 WM142 8611 WM144
J5062 3/8 x 3/4
8059 1/4 x 3/4 1/4 x 3/4
8062 J5140
WM96 SCOTIA

8059B SCOTIA J5610 J5611
1/2 x 1/2

5/8 x 3/4 1/2 x 7/8 /11 16 x 11/8
J5671
J5662 CAP LATTICE PICTURE NOSING 8471 BAND
J5471
J5670 8281 LATTICE LWM267 J5575 8470 BAND
1/4 x 15/16 J5470
B662 B671 CAP 8469 BAND
CAP J5281 J5469
8282 LATTICE LWM265 8180 BAND
J5180
1/4 x 13/4
B670 CAP J5282 J5263 J5188
WM294
3/4 x 3/4 B638 LATTICE/PANEL 8263 8575 J5001
WM273 3/8 x 1/2 WOBS001

8288 1/2 x 3/4

/11 16 x 11/8

/11 16 x 13/8 /11 16 x 13/8

HAND RAIL 3/8 x 13/4 /11 16 x 13/4 8200 CORNER WM2068240 J548440W4M0 999 DRIP CAP
J5638 8238 CORNER J5200 J5240 5/16 x 1
75 WM231 J5238 923
HAND RAIL 8912 WM204 3/4 x 3/4 DRIP CAP
11/2 x 111/16 WM233 15/16 x 15/16 WM196 J5923
CLOSET POLE
FJ RAW /11 16 x 13/4
& 15/16
FIR 11/16 x 11/16
Solid Fir J5912
J5331 For Andersen Perma-Shield
Casement and Awning

989 EXTENSION JAMB - 69/16 WALL J5389

/11 16 x 327/32 319/32 FACE

6009 6510 6010 HANDRAIL J5288
2 3/8 x 2 5/8 2 5/8 x 2 3/8 6010
SOLID CAP SOLID CAP 988 EXTENSION JAMB
OAK HANDRAIL OAK HANDRAIL 21/4 x 2 69/16 WALL
OAK-BEECH
J5009 J5510 HANDRAIL For Andersen 400 Series Tilt-Wash
Double-Hung Units
March 2018 J5010
/11 x 23/16 2 FACE
16

103

CLASSICAL COLONIAL

Crown Detail: 81⁄4" Casing Detail:
3⁄4" 7⁄8"
WOBM001 15⁄8"
Base

3⁄4" 35˚ WOCM002 13⁄4" 13⁄4" 21⁄4"
39⁄16" Crown 2

31⁄8" 51⁄2" WOBB001 WOCH001
1x6 S4SSE
51⁄2"

WOCM001 3⁄4" Back Band Chair Rail
Crown 1 4" 715⁄16" 71⁄4" 51⁄2"

3⁄8" 3⁄4" WOCS001
Casing

37⁄8"

WOCM003
Crown 3

15⁄8" 13⁄16"

COLONIAL REVIVAL

Crown Detail 1⁄2" WOST004
Stop
31⁄2"
WOCM006 Window Detail: WOBM004
Crown 41⁄2" Base Molding

50˚ 49⁄16" 13⁄16" 1⁄2" 71⁄4"
3" 11⁄16"
WOBS001
1⁄2" 11⁄2" Base Shoe
39⁄16"
43⁄8" WOWS001 3⁄4"
Window Stool 3⁄4" 1⁄2"

17⁄8" March 2018

WOPM004 1⁄2" WOCS005 WOCS006
13⁄4" Picture Molding Casing Apron

3⁄4" 3⁄4" 3⁄4"

Special Order 3-5 Day Lead Time

104 www.windsorone.com

CLASSICAL CRAFTSMAN

WOCS003 Casing

3⁄4" Crown Detail: WOPB001 Header Detail:
33⁄8" Plinth 21⁄4"
WOWS002
41⁄4" Window Stool 31⁄8" 3⁄4" 15⁄16"
Window Detail: 45˚ 49⁄16"
11⁄16"
41⁄4" 8" WOHC001
1⁄2" Header Cap
8”
2"
13⁄8"
7⁄8" WOCM005 61⁄4"41⁄2" 1x5 S4SSE WOBM003
Crown Header Frieze 71⁄4" Base Molding
3⁄4"
39⁄16" WOBS001
WOCV001 Base Shoe
Cove
3⁄4"
WOCS004 13⁄4" WOPM004 3⁄4" WOST001 3⁄4" 1⁄2"
Apron 3⁄4" Picture Molding 7⁄16" Stop

3⁄4" 11⁄16"

GREEK REVIVAL

Crown Detail: Casing Detail: Window Detail:
1x2 S4SSE
1x2 S4SSE 41⁄2" 11⁄4"
11⁄2" 11⁄2"
1⁄2" WOBM002
3⁄4" 315⁄16" 3⁄4" 11⁄16" Base Molding
1⁄2" WOWS001 41⁄4"
33⁄8" 3⁄4" Window WOCV001 7⁄8" 51⁄2"
50˚ Stool Cove

41⁄4"31⁄2" 3⁄4" 3⁄4"

WOBB002 31⁄2" WOCS007
Band Molding Apron

WOCM004 4" WOCS007
Casing
11⁄16"

3⁄4" 3⁄4" 3⁄4"

S PE C I A LT Y B OA R D S , WA I N S C OT C A P S & PA N E L M O L D

WOCS009 SPBC6 Standard
Beaded Casing Tongue
WOSP001
WOCS008 Federal Panel Mold & Groove
Bead Board
Beaded Casing 11⁄4"
WOCS010

WOCS007 Double WOWC002 WOWC006
Wainscot cap Wainscot cap
Beaded Casing Beaded Casing SPBC4

15⁄8" 7⁄8"

51⁄4" 41⁄4" 31⁄2" 31⁄2" 1" WOWC003 51⁄2" 35⁄16"
Wainscot cap

3" 3⁄4"
25⁄8"

13⁄8"

3⁄4" 3⁄4" 3⁄4" 3⁄4" 11⁄8" 13⁄4" 23⁄32" 5⁄8"

March 2018 Special Order 3-5 Day Lead Time 105

www.windsorone.com

LUMBER & MILLWORK Craftsman Collection

3 1/2" BACKBAND CASING

J2303 312BBCASFJP WOCM006

/11 16 x 3 3/8

WOCM001

J1416

9/16 x 71/4 3/4 x 49/16 WOCS010
BASE714SFJP Double
3/4 x 39/16 Beaded Casing

610 Crown 31⁄2"

7 1/4" SQUARE BASE 1x6 3⁄4"
J4701 Craftsman stop
B688 BASE 9/16 x 41/4
J4488 1x4 1x4 3 piece header
Butt Joint w/ 1 x 4 casing
w/ 1/4" overhang

Colonial Collection

CROWN

8730 CASING VICTORIAN LW8M04099 CROWN
WM315 CROWN
CR396
J2230 W 8M04173

/11 16 x 21/2

8754 CASING J2354 J1413
WM444 J2325 J1309

/11 16 x 31/2

3/4 x 51/8 /11 16 x 45/8 9/16 x 35/8

B225 MARBLEHEAD CASING
/11 16 x 31/2

9/16 x 7 1/4 9/16 x 51/4 9/16 x 41/4 8725 CASING J2225 WM300 CHAIR RAIL 11/16 x 3
/11 16 x 21/2 J3300
B200 WINDSOR CASING J2320
LGM 57 BASE BOARD 11/16 x 31/2 8630 CHAIR RAIL 11 16/ x 25/8
J4700 B400 SPEED BASE 4 1/4" SPEED BASE 8710 CASING J3230
J4500 J4400 WM351 J2210

/11 16 x 21/2

EXOTICA CASING J2394 2 1/2 JALCO CASING J2200
11/16 x 31/2 /11 16 x 21/2

106 March 2018

LUMBER & MILLWORK Modern Collection

WOCMJ1040044

9/16 x 51/2 8627 CASING PPNOSING134
BASE512VSFJP WM472 /11 16 x 13/4

11/16 x 4 9/16 x 21/2 J2227 8627 CASINGJ6134 SCOTIA
WM472 8062
5 1/2" VERY SQUARE BASE B688 BASE 9/16 x 41/4 WM96
J4501 J4488 9/16 x 21/2
5/8 x 3/4

8308 2 ROUND CORNER CASING J2308
WM412

/11 16 x 31/2

3 1/2" Very Square Casing J2227

J2302 312VSCASFJP

/11 16 x 31/2

Cottage Collection

CR399 WOCM005
HARBOR CLASSIC
CROWN

WOCM005

J1415J1415

J1699 17/32 x 51/2

5/8 x 51/4 1 1/16 x 6 1/8 3/4 x 4 9/16 15/16 x /13 16 CR303 REVIVAL
BACK BAND
HARBOR CLASSIC 2.5" CASING J5103CR398

CR378 HARBOR CLASSIC 5.25” BASE CR398 J2208 J2500 Craftsman Head Casing 107
J4578
HARBOR CLASSIC 2.5" CASING 3/4 x 21/2

3/4 x 21/2

CR370 HARBOR CLASSIC 3.5” CASING J2370 J2208
3/4 x 31/2

CR391 HARBOR CLASSIC 4.5" CASING J2491
3/4 x 41/2

March 2018

Suggested casings to use
with corner blocks

B100 BELLY BAND CASING J2400

/11 16 x 41/4

CR392 ADAM CASING J2492

3/4 x 41/2

CR393 QUEEN ANNE CASING J2593

3/4 x 5

1x5

3/4 x 41/2

1x4

3/4 x 31/2

Corner Blocks

1-1/8" 1-1/8" 5-1/2"

5"

1-1/8" 3-3/4"

1-1/8" 2-3/4" 0-3/4" 2-3/4"

JB275B/5 JB275A JB375D/5 JB500D/5 JB550D/5

1-1/8" 0-3/4" 1-1/8" 1-1/8" 4-1/2"

4-1/2" 4-1/2" 4-1/2"

JB450A/5 JB450B JB450C/5 JB450D/5

108 March 2018

Interior Casing Options

Topper Prep Craftsman Prep

J2500 610 Crown

1x6
Craftsman stop

one piece header 3 piece header
w/ 1 x 4 casing w/ 1 x 4 casing

1x4

Butt Joint

Butt Joint
w/ 1/4" overhang

Flat Casing Mitre Joint

Mitre Joint best used on large
Profiles Casings profiled mouldings
or PVC exterior casing

Pocket Mitre Joint

Pocket Screw Dovetail Key Back Nail Dovetail Key

used only with used with MDF all profiled mouldings used with MDF casing
wood casings flat casing either MDF or wood or large profiled
often used when can be back nailed casings
header is different
than side casing

May 2019 109

Window and Door Interior Trim Packs

Casing stool cut to approximate length
Universal Window and Door Casing Packs

How To Order

All window trim is ordered
using R.O. sizes
Example:
• Window T.P. R.O. 36 x 56
• Window T.P. R.O. 96 x 48

Stool Cap & Apron Door Units: Picture Frame

Specify the following: All door trim is ordered Specify the following:
• Casing style using R. O. sizes • Casing Style
• H ead casing if different Example: • E xtension Jamb or window
• Door T.P. R.O. 36 x 83
than side casing • Door T.P. R.O. 72 x 80 stop
• Stool Cap Specify by width & height: • Mull cover ordered sepa-
• Apron if different than • Casing Style
• Head casing if different than rately. See sizes at chart
casing below.
• E xtension jamb or window side casing
• Extensions Note:
stop • Back Band Each Trim Pack is
• M ull Cover, order seperate- individually wrapped

ly See sizes at chart below. & labeled

Mull Cover Sizes March 2018
MDF 496 3-7/8 x 96 x 1/4
MDF 696 5-7/8 x 96 x 1/4
MDF 896 7-7/8 x 96 x 1/4
MDF 1296 11-7/8 x 96 x 1/4
MDF 8120 7-7/8 x 120 x 1/4

110

Milled Wood (MW) &
Nosed Wood (NW)

March 2018 these two options are
only used when using
1/8" or 1/4" radius edges

111

Custom Exterior Doors

LUMBER & MILLWORK

Designed Just For You ...

Standard Jackson Info required for
Custom Door:
Doors Feature:
• Width
• Expert design assistance and • Height
shop drawings as required • Thickness
• Door Design
• 1-¾” or 2-¼” Thickness • Sticking - Panel
• 42” max. width & 96” max. height • Glass
• Premium Grade Wood Species: • Grill - type & layout
o Honduras Mahogany • Specie - paint or stain grade
o Spanish Cedar • Hinge - size, function, color
o Red Oak • Handing
o White Oak • Hardware Prep - backset
o Eastern White Pine
o Fir Jamb
• Solid stiles & rails • Wall thickness
• S olid floating panels are designed • Specie or primed composite
• W eatherstrip - door bottom
to move with the natural expansion
and contraction of wood sweep
• Panel edges are sealed with poly- • Sill - Threshold
urethane before assembly • Exterior casing - size and profile
• Top & bottom edges are sealed • M ull Post - wood, primed
with polyurethane to prevent mois-
ture infiltration composite
• Mortise & tenon joints • Special Machining
• Assembled with exterior grade “sign
life” glue
• Glazing options include
o 1-5/8” ADL (authentic divided lite)
o 7/8” SDL (simulated divided lite)
o 5/8”, 3/4” or 1” GIA (grille in
airspace)

Sticking Profile Options:

Panel Options: Glazing Options:

Ovolo 0-7/8"

Shaker Raised Panel Simulated Divided Lite (SDL) w/ Bevel Sticking
Bevel Flat Panel
V Groove Panel 1-5/8"
Roman Ogee
Authentic Divided Lite (ADL) w/ Ovolo Sticking

Bolection Grille in Airspace (GIA) w/ Ovolo Sticking

112 March 2018

Introducing the New
Schlage Custom FC Series

One system. Endless possibilities.

Schlage Custom™ Door Hardware is uniquely designed with premium style in mind. Add instant polish to the look of any
room with Schlage’s architecturally-inspired knobs, levers and trim in lustrous, long-lasting finishes – all at an affordable
price. Pair interior hardware with Schlage Custom™ Handlesets to coordinate the look inside and out.

The Schlage Custom™ Combined Interior core works on both bed/bath and hall/closet doors, so you can buy one lock
that provides you with multiple options. When it’s time to redecorate, it’s easy to update the style of your interior Schlage
Custom Door Hardware without installing a whole new lock. Simply remove the knob, lever or trim and swap out with
your new favorite finish and style.

Express your style Broadway Dempsey Eller Latitude
• Give your interior doors a designer makeover with Northbrook Whitney
Alexandria Andover Bowery Georgian
Schlage Custom Door Hardware Plymouth
• Feature real glass knobs at an affordable price Hobson
• C oncealed screws and low profile trim offer

a cleaner look
• P air with Schlage Custom Handlesets to create a

consistent look from the front door to the back

Proven quality and flexibility
• C ombined Interior works for both

bed/bath and hall/closet doors
• H ighest industry ratings for residential security,

durability and finish

Easy installation
• I nstalls in minutes with screwdriver and included

allen wrench
• G uarantee fit on standard doors

Alden Camelot Century Collins Kinsler Rosewood Upland
(ALD) (CAM) (CEN) (COL) (KIN) (RWD) (ULD)

(LAT) Latitude 608 609 618 619 621 622 625 626 716
(BRW) Broadway
(WIT) Whitney ● ● ● ● ● ● ● ● ●
(DMP) Dempsey ● ● ● ●
(NBK) Northbrook ● ● ● ● ●
(ELR) Eller ● ● ● ● ●
(ALX) Alexandria ● ● ● ● ●
(HOB) Hobson ● ● ● ● ●
(PLY) Plymouth ● ● ● ● ●
(GEO) Georgian ● ● ● ● ●
(BWE) Bowery ● ● ● ●
(AND) Andover ● ● ●●
● ● ●
●
March 2018 www.schlage.com ●

113

F Series Levers and Knobs Schlage Decorative Collection

Accent Avanti Avila Birmingham

Addison Andover Brookshire Camelot Century
(ADD) (AND) (BRK) (CAM) (CEN)

Broadway Callington Champagne Elan

Flair Jazz Latitude Manhattan

Collins Greenwich Greyson Upland (WKF)
(COL) (GRW) (GSN) (ULD)

Merano Northbrook Sacramento St. Annes F10 - Passage Latch

F40 - Bath/Bedroom Privacy Lock

Andover Bell Bowery Georgian F170 - Single Dummy Trim
F51 - Entrance Lock
F60 - Entrance Lock Handle Set

F80 - Storeroom Lock
B60 - Single Cylinder Deadbolt
B62 - Double Cylinder Deadbolt

Orbit Plymouth Siena

Knobs and Levers

Finishes Knobs and levers - Decorative Collection
Knobs
605 608 609 613 618 619 620 621 622 625 626 716 605 608 609 613 618 619 620 621 622 625 626 716

Andover ● ●● ●● ●●● Addison
Andover
Bell ● ● Brookshire ● ●●●●●●●
Camelot
● Century
Greenwich
Bowery Greyson ● ●● ●● ●●●●
Wakefield
●● ●●●● Collins
Upload
Georian ●● ● ● ●

● ● ●●●●● ●

Orbit ●●● ●● ●● ●

● ● ●●

Plymouth ●● ●●●●

●●●● ●● ●●●●

Slena ●● ●●●●

●● ●● ●●●●

●● ●●●●

Levers ●●● ●● ●

Accent ●●●●●●●●●●●● ●

Avanti ●● ● ●

Avila ●● ● ●●●

Birmingham ● ●● Finish options (US code)

Broadway ● ●●●●

Callington ●●

Champagne ● ●

Elan ●● ● ●●●● 505/605 608 609 613 618 619 620
Bright Brass Satin Brass Antique Brass Oil Rubbed Bronze Polished Nickel Satin Nickel Antique Pewter
Flair ●●● ●● ●●● (US LO3/US 3)
(US 3) (US 5) (US 10B) (US 15) (US 15A)

Jazz ● ● ●●●●

Latitude ●● ●●●●

Manhattan ● ●●●

Merano ● ●●●● 621 622 625 626 630 716
Distressed Nickel Matte Black Bright Chrome Satin Chrome Satin Stainless Aged Bronze

Sacramento ●● ●●● (US 19) (US 26) (US 26D) Steel (US 11P)
(J Series only)
St. Annes ●● ●● ●●●
(US32D)

Northbrook ●

114 www.schlage.com March 2018

B Series mechanical deadbolts

B60

Deadbolts - Decorative Collection

505 605 608 609 613 618 619 620 621 622 625 626 716

Addison ●● ● ●●● ●

Brookshire ●● ●

Camelot ●●●● ● ●

B62 Century ●● ●●●●

B60, B62 Series Greenwich ● ●●●●

Finishes Wakefield ● ● ●●●● ●●

Series 509 605 608 609 613 618 619 620 621 622 625 626 716
US3 US5 US108 US15 US15A US17A US19 US26 US26D US11
B60 ● ●
B62 ● ● ● ●●● ● ● ● ● ● ● ●

● ● ● ●

F Series Handleset

Addison Brookshire Camelot Century Greenwich Plymouth (WKF)
(ADD) (BRK) (CAM) (CEN) (GRW) (PLY) 716

(PLY) Plymouth 605 608 609 613 618 619 620 621 622 625 626 ●
(CAM) Camelot ●
(CEN) Century ● ●●●● ● ● ● ● ●
(ADD) Addison ●● ● ●● ● ● ● ● ●
(BRK) Brookshire ● ● ●
(GRW) Greenwich ● ●● ●● ● ● ● ●
(WKF) Wakefield ●● ● ●
March 2018 ●● ● ● ●
● ● 115
●●
●●

www.schlage.com

Brass Modern Octagon Knob Orb Knob
Bern Knob (OCT) (OR)
(BN)

Square Knob Lowell Crystal Knob Windsor Crystal Knob
(SQU) (LW) (WS)

Solid Brass

Egg Knob Norwich Knob Providence Knob

Rope Knob Georgetown Knob Old Town Clear Knob
(RK) (GT) (OT)
Sandcast Bronz e

Butte Knob Egg Knob Round Knob
(BU) (BZEG) (BZRN)

Winchester Knob Hampton Knob Providence Crystal Knob
(WC) (HT) (PC)

#2 #3 #4 #6 #11 #12 #14
Rosette Rosette Rosette Rosette Rosette Rosette Rosette
116
March 2018

Brass Modern Geneva Lever Helios Lever
Argos Lever (GV) (HLO)
(AG)
LLuzern Lever Stuttgart Lever
Hercules Lever (LU) (STU)
(HEC)
Solid Brass Elan Lever Merrimack Lever
(EN) (ME)
Cortina Lever
(C) Santa Fe Lever Wembley Lever
Rope Lever (SF) (WM)
(RL)
Sandcast B ronze

Cimarron Lever Cody Lever Durango Lever
(CR) (CD) (D)
Lariat Lever
(LR) Montrose Lever Teton Lever
(MT) (TT)

Oval Rectangular Regular Quincy Wilshire Disk Modern Rectangular Modern Noes
Rosette Rosette Rosette Rosette Rosette Rosette Rosette Rosette Rosette

Specify:

Latch: 2-3/8 or 2-3/4
Strike: square corner or 1/4” radius corner
Strike plate: square corner or 1/4” radius coner
Right or left hand.

March 2018 www.emtekproducts.com 117

Hinges
Codes & Finishes

Cross Reference Sheet

1/4” Radius Residential Duty DESCRIPTION B.H.M.A. US Item # Code
Plain Bearing Hinges for Symbol Finish #
3-1/2” x 3-1/2” 1 3/8" doors Light Brass RC-1741-US3LB 312US4BUTT
Bright Brass 605 US 3 RC1741-US3 312US3BUTT
Bright Chromium Plated 605 US 3 RC1741-US26 312US26BUTT
Satin Chromium Plated 625 US 26 312US26DBUTT
Antique Brass 626 US 26D RC1741-US26D 312US5BUTT
Oil Rubbed Bronze 609 US 5 RC1741-ABA-US5 312US10BBUTT
Satin Nickel 613/716 US 10B 312US15BUTT
Flat Black 619 US 15 RC1741-US10B 312US1DBUTT
622 US 1D RC1741-US15
RC1741-US1D

1/4” Radius Heavy Duty Hinges Bright Brass 605 US 3 9202303 EMT92023US3
Plain Bearing for Residential Satin Nickel 619 US 15 9202315 EMT92023US15
3-1/2” x 3-1/2” 1 3/8" doors Oil Rubbed Bronze 613/716 US 10B 9202310B EMT92023US10B

92023 Requires slightly deeper mortise pocket

1/4” Radius Residential Duty Satin Chromium Plated 626 US 26D RC1741-US26D 44US26DBUTT
Plain Bearing Hinges for Oil Rubbed Bronze 613/716 US 10B RC1741-US10B 44US10BBUTT
1 3/4" doors Satin Nickel US 15 RC1741-US15 44US15BUTT
4” x 4” 619

HINGEPINSTOP15 Deltana US#15 hinge pin stop
HINEPINSTOP10B Deltana US#10B hinge pin stop
Ives #70A3 US# 3 hinge pin door stop
190170
Deltana US#15 base stop
DOORSTOP15 Deltana US#10B base pin stop
DOORSTOP10B Ives #61A3 US# 3 base door stop

DOORSTOP3

LJ3012US15 LJ 3012 satin nickel handrail bracket EXTENDED LIP STRIKE
LJ3012US10B LJ 3012 oil rubbed bronze handrail bracket
HRBRACKET
Ives #59A93 US#3 handrail bracket
59A92 Ives #59A92 aluminimum handrail bracket

HRBRACKETUS15 Deltana US#15 handrail bracket
HRBRACKET10B Deltana US#10B handrail bracket

Code Description Don-Jo # 2 1/4”
SOHDW 2 1/4" x 2" Extended Lip Strike US# 15 EL-102-649-RC
SOHDW 2 1/4" x 2" Extended Lip Strike US# 10B EL-102-DU-RC
SOHDW 2 1/4" x 2" Extended Lip Strike US# 3 EL-102-605-RC

118 www.deltana.net 2”

May 2019

Hinges
Codes & Finishes

Cross Reference Sheet

B.H.M.A. Finish Code
BASE MATERIAL

U.S. DESCRIPTION PBB Steel Brass Bronze Stainless Alum. Hager McKinney Bommer Stanley
USP Primed for Painting USP P USP USP
US1D Dull Black 600 600 - - - - US1D 1D - US1D
US2C Zinc Plated, Commercial US2C 2C - US2C
US2G Zinc Plated, Government 800 - - - - - US2G 2G US2G US2G
US3 Bright Brass US3 3 US3 US3
US4 Dull Brass 602 602 - - - - US4 4 US4 US4
US5 Dull Brass, Antique US5 5 US5 -
US7 Brass, Nickel, Oxidized - 603 - - - - US7 7 US7 -
US9 Bright Bronze US9 9 US9 -
US10 Dull Bronze 632 632 605 - - - US10 10 US10 -
US10B Antique Bronze, Oiled US10B
US10B Dark Antique Bronze/Oiled 633 633 606 - - - 10B US10B US10B
US10A Antique Bronze, Lacquered - - - -
US11 Dull Bronze, Oxidized 638 638 609 - - - - - - -
US14 Bright Nickel Plated - - -
US15 Satin Nickel Plated 636 636 610 - - - US14 14 US11
US15A Nickel Antique Relieved US15 - US14 US14
US17A Nickel Plated, Blked, Relv 637 637 - 611 - - US15A - US15 US15
US20 Statuary Bronze, Light - - US15A
US20A Statuary Bronze, Dark 639 639 - 612 - - US20 20 US17A -
US26 Bright Chromium US20A US17A
US26D Dull Chromium 613 - - 613 - - US26 20A - US20
US28 Anodized Dull Aluminum US-26D 26 US20A US20A
US32 Polished Stainless Steel 813 640 - 613 - - US28 26D US-26 US26
US32D Dull Stainless Steel US32 Clear US-26D US-26D
Gray Enamel 641 641 - - - - US32D 32 US28
716 Aluminum Lacquer 32D 628 US32
Zinc Plated-Buffed Bright - 643 - 616 - - LS GY US32 US32D
Zinc Plated-Dull 2CB LT US32D
Black Nickel 645 645 618 618 - - 2CD - -
CO-Lacquer, Light 14B 2CD - LA
CO-Lacquer, Medium 646 646 619 619 - - B14 FL2 KL
CO-Lacquer, Dark - - KD
CO-Lacquer, Black 647 647 620 620 - - L3 - - -
Anodized, Dark Aluminum L2 - - DL
Brown Lacquer 648 648 621 621 - - L1 - - DM
D. Brz, Powder Coat BRZ Bronze - DD
Off-White - 649 - 623 - - - - FE3 -
Off-White, Powder Coat - - - -
Dull Gold - 650 - 624 - - 14P - -
Bright Gold - - 393 -
Aged Bronze 651 651 625 625 - - - - - DW
- - - -
652 652 626 626 - - - - - -
- -
628 - - - - 628 - -
-
629 - - - 629 - -

630 - - - 630 -

-- - - - -

689 - - - - -

-- - - - -

-- - - - -

-- - - - -

-- - - - -

694 - - - - -

695 - - - - -

-- - - - -

710 - - - - -

808 - - - - -

810 - - - - -

830 - - - - -

831 - - - - -

887 - - - - -

888 - - - - -

-- - - - -

March 2018 www.hagerco.com 119

Caulk-N-Walk™ Caulk-N-Walk™
for the Simplest,
Fastest Columns

Installations

White Seamless Columns...
Just Caulk and Walk Away!

Patent pending Caulk-N-Walk™ Seamless Column takes column installation to the
next level with our white, paint optional column.

No more parting lines to sand or fix with body putty. Our Caulk-N-Walk Seamless Column comes with the
Plumb Perfect installation system. All the fasteners are concealed. Everything you need to put up a column
comes in one box. The white seamless column along with the installation system will make completing your
column project easy while saving the installer valuable time and money. Whether it is a single column or a
group of columns your job will be accomplished more easily than ever before.

Here's what you get in the box: Features and Benefits:

• White Seamless Column. The color runs • The first white seamless column system.
all the way through the column.
• No more searching for parts
• White polyurethane snug-fit capital with
foam ring insert that hugs the column. • Plumb bob, installation disc and base
target make plumbing a column quick
• White composite base, same material as and easy.
the column. Base fits snug on top of the
base ring. • Base target assists in positioning base
ring and column.
• Base ring with predrilled holes.
• Caulk-N-Walk™ Seamless Column
• Base ring target to assist in plumbing the eliminates outside installation hardware.
column. No more brackets.

• Installation disc with predrilled holes. • Our installation system ends finish work
Center hole accommodates the plumb on screw heads.
bob hanger.
• With a little adhesive, lower the base over
• Plumb bob with hanger and string. the base ring and push the capital into
position. Everything is locked in place.
• (9) Tapcon® screws
• Caulk it and walk away.
• Wood shim

Featuring Plumb Perfect Installation System Code Description
120 88CW 8" x 8' Plain Round
89CW 8" x 9' Plain Round
108CW 10" x 8' Plain Round

March 2018

Caulk-N-Walk Round
Smooth Columns

Column Outside Inside Outside Inside Material Minimum Cap Base Load
Size Diameter Diameter Diameter Diameter Thickness Neck Width Width Bearing
Top (A) Bottom (B) Bottom Capacity
Top Height (C) 9 1/8” 10” 10,000
9 1/8” 10” 10,000
8” x 8’ 6 1/8” 5 3/8” 7 5/8” 6 7/8” 3/8” 5” 9 1/8” 10” 10,000
12 1/4” 13 3/8” 14,000
8” x 9’ 6 1/8” 5 3/8” 7 5/8” 6 7/8” 3/8” 5” 12 1/4” 13 3/8” 14,000
12 1/4” 13 3/8” 14,000
8” x 10’ 6 1/8” 5 3/8” 7 5/8” 6 7/8” 3/8” 5” 14” 15 3/8” 18,000
14” 15 3/8” 18,000
10” x 8’ 8” 7 1/4” 9 5/8” 8 7/8” 3/8” 5 7/8” 14” 15 3/8” 18,000

10” x 9’ 8” 7 1/4” 9 5/8” 8 7/8” 3/8” 5 7/8”

10” x 10’ 8” 7 1/4” 9 5/8” 8 7/8” 3/8” 5 7/8” A = Top Outside Diameter
B = Bottom Outside Diameter
12” x 8’ 9 3/8” 8 5/8” 11 1/2” 10 3/4” 3/8” 7 3/4” C = Minimum Neck Height

12” x 9’ 9 1/2” 8 3/4” 11 1/2” 10 3/4” 3/8” 7 3/4”

12” x 10’ 9 1/2” 8 3/4” 11 1/2” 10 3/4” 3/8” 7 3/4”

Plumb Perfect Column™ Installation System eveSrtyanCdaaurldk-wNi-tWh alk
Column
All-in-one Box Column Installation System.
Colonial
• The first all-in-one box column system. Perma Post
• No more searching for parts. 5” x 5” x 8”
• Plumb Perfect Column™ eliminates outside installation

hardware. No more brackets.
• Plumb bob, installation disc and base target make

plumbing a column quick and easy.
• Base target assists in positioning base ring and

column.
• Lower the base over the base ring and with a little

adhesive everything is locked in place. Finish with
caulk.
• Simply push the capital into position, secure with
adhesive.
• Plumb Perfect Column™ does away with finish work on
screw heads by concealing all installation devices.

** Available Special Order ** 7.00" COMPPOST558
COMPFASTKIT5
Split-Fit™ Column Reassembly System 54.00”

Eliminate Your Splitting Headaches™. 11.00”

• Cast indexing keys make aligning the Code - PVCCRAFTSMAN
column halves stress free.

• No slipping or sliding at glue joint.
• You can use fast setting epoxy to reduce

installation time.
• Fully split columns arrive ready to install.
• Precision Diamond Cut line is easy to

finish.
• Eliminates the hassle of finishing the

splitting at the job site.
• Saves valuable finishing time.
• No screws or tabs required.
• Tongue & Groove fit assures snug

installation.
• Three dimensional alignment guaranteed.
• Keys restrict lateral & vertical play. Ensures

an easy to finish seam.
• Split Reassembly Kit included.

March 2018 121

LUMBER & MILLWORK

Commercial Masonry Frames

APPLICATIONS:
Masonry Frames are typically used in the following types of wall construction:

Wall Construction Application Typical Wall Anchors Typical Masonry Frame
Wire Masonry
New Masonry wrap or bolted Bolted Through Soffit Jamb Depth
Soffit
Existing masonry butted Stop Rabbet
Rabbet

Adjustable Base Anchor Wire Masonry Anchor

Attached with S.M. screws (furnished)

Face

Backbend Throat Opening Backbend

Welded Corner

Backweld

Maximum adjustment 3/16" dia. wire
1-3/8" below frame
for new blocCk SwWaIlRl Econstruction
inInccluluddeedd wwiitthhffrraammee For new block wall construction

JLM Part # Description

F4U5343068LACGW WF F16 UL 5-3/4 3068LH ASA SUA
F4U5343068RACGW WF F16 UL 5-3/4 3068RH ASA SUA

F4U7343068LACGW WF F16 UL 7-3/4 3068LH ASA SUA • Flush Frames:
F4U7343068RACGW WF F16 UL 7-3/4 3068RH ASA SUA These frames are designed for installation as part of
the wall framing sequence, and installed in interior
F4U5343070LACGW WF F16 UL 5-3/4 3070LH ASA SUA and exterior applications. When installed, this frame
F4U5343070RACGW WF F16 UL 5-3/4 3070RH ASA SUA series will either wrap or butt up against the wall
construction. Anchoring will be either into the
F4U7343070LACGW WF F16 UL 7-3/4 3070LH ASA SUA masonry wall, or to the stud systems.
F4U7343070RACGW WF F16 UL 7-3/4 3070RH ASA SUA

* Frame sizes are listed as jamb depth. Fasteners
Pipe Sleeve Anchor
CM-63675

3/8" x 5" Phillips Drive Expansion Bolt

Use with pipe sleeve anchor in a
masonry application

CM-64507
3/8" x 5" Phillips Drive Wood Screw

CSPPSA Use with pipe sleeve anchor in a
For existing wall used with wood application

fastener below

122 March 2018

LUMBER & MILLWORK Commercial Drywall Frames

Typical Frame

Typical Frame

4-7⁄8" Strike Prep (ASA)

Head KD Corner Detail
• Knock Down (KD) – Frames are supplied 4-7/8"

in 3 pieces for assembly prior to • Drywall Frames:
installation at the job site, and by the These frames are designed for interior applications
installing contractor. This is an economi- and for installation in rough openings after the wall is
cal method of supplying the frames, up and finished. They can be installed in minutes
and at the job site there is less room and can be relocated without damage to the frame.
consumed in staging the products, When installed, this frame series will wrap the wall
easier job site movement of material, construction. Anchorage will be to the stud systems.
and usually less damage to the frame
prior to installation.
• Set-up and Welded (SUA) – Prior to
arriving at the job site, the 3-sided frame
(with factory miters) is assembled (at the
distributor’s fabrication location, or by
Steelcraft). The miters are welded (in
accordance with ANSI A250.8-1998),
finished and supplied to the job site
ready for installation. SUA frames are
shipped to the jobsite with temporary
shipping bars attached. The temporary
shipping bars must be removed prior to
installation. Due to the installation
process, the Drywall Series of Frames
(DW and K) are not supplied as welded
(SUA).

Hinge Jamb Strike Jamb

Typical Drywall Frame

Jamb Depth

Stop Soffit Rabbet JLM Part # Description
Rabbet K6U5783068LAC KDF K16 UL 5-7/8 3068LH ASA
K6U5783068RAC KDF K16 UL 5-7/8 3068RH ASA
Face Backbend Return K6U5783070LAC KDF K16 UL 5-7/8 3070LH ASA
Backbend Throat Opening K6U5783070RAC KDF K16 UL 5-7/8 3070RH ASA

Backbend * Frame sizes are listed as jamb depth.

APPLICATIONS:
Drywall Frames are typically used in the following
types of wall constructions:

Wall Construction Application Typical Wall Anchors
Compression jamb
Wood stud wrap Compression jamb

Steel stud wrap

Masonry Not recommended

Drywall Pressue Anchor with Dimple Existing masonry Not recommended
March 2018
123

R/CBirchLUMBER & MILLWORK
Rotary VENEER SUMMARY TABLE

ROTA R Y

This cut follows the log’s annual growth rings,
providing a generally bold random appearance.

MATCHING BETWEEN INDIVIDUAL PIECES OF VENEER Species Birch
Leaf matching Rotary
Cut White
The way in which the individual cuts are placed next to each other during the fabrication COLOR AND MATCHING Slight
of the veneer face is the next factor affecting the appearance of the doors. The type ofmatch Sapwood
at the joint line must be specified. Natural variations in the leaves and the progression of the Heartwood No
grain pattern across the face are the hallmarks of real wood doors. Color streaks or spots Slight
Color variation Slight
PLEASING MATCH Sharp color contrasts at joints Slight
TYPE OF MATCHING
Pleasing Match is veneer matched by color but not by grain pattern. Book matched No
Continuous matched (transom) No
Barber pole effect in book match Slip matched No
Pleasing matched Yes
Because the “tight” and “loose” faces alternate in adjacent pieces of veneer, they may accept Random matched No
stain differently, and this may result in a noticeable color variation called barber poling. Rotary
Nominal minimum width 3.5” (89 mm)
ASSEMBLY OF SPLICED VENEER ON A FACE of face components
3 per 2.69 sq. ft.
The type of “assembly match” must be specified to obtain a desired appearance. Any sequence NATURAL CHARACTERISTICS (0.25 sq. m)
matching from opening to opening must be specified. Small conspicuous burls and pin knots
1/2’’ (12.7 mm)
– Combined average number 3 per 8 sq. ft.
(0.74 sq. m)
Conspicuous burls – Maximum size 1/8’’ (3 mm)
1/4” (6 mm)
Conspicuous pin knots
– Average number No
– Maximum size: dark part No
– Maximum size: total No
No
Scattered sound and repaired knots Slight
– Combined average number No
– Maximum size – Sound Slight
– Maximum size – Repaired Slight
– Average number – Repaired Slight

Mineral streaks No
Bark pockets Two 1/16’’ x 6’’
Worm tracks (1.6 mm x 152 mm)
Vine marks Small blending
Cross bars
MANUFACTURING CHARACTERISTICS March 2018
Rough cut

Blended repaired tapering
hairline splits

Repairs

JLM Part # Description

3068134ULB 3068 Unifrm Lite Birch Clear Finish Reversible
3070134ULBL 3070 Uniform Lite Birch Clear Finish LH
3070134ULBR 3070 Uniform Lite Birch Clear Finish RH

124

LUMBER & MILLWORK

Particleboard core

Matching edge 5-PC-ME

12 3 45 Type Particleboard core (interior use).
In conformity with
MEMBER industry standards ARCHITECTURAL WOODWORK STANDARDS-ED.1
W.D.M.A. SERIES I.S.1-A-2004
C US Thickness ASTM D5456-09
Maximum size ANSI A208.1
k Stiles
Rails 1-3/8" (35 mm) – 1-3/4" (44 mm).
Core 2" (51 mm) – 2-1/4" (57 mm).
Adhesive
Face 48" x 120" (1 219 mm x 3 048 mm).
Options
ME: 7/16" (11 mm) hardwood laminated to
Lite and louver 1" (25 mm) structural composite lumber (SCL).
openings
1-7/16" (36 mm) structural composite lumber (SCL).
Notes
Warranty Particleboard core with a density of 28-32 PCF
Factory Finish (449-513 kg/m³ ) LD-1, bonded to the stiles and rails.

Environmental Type I (waterproof); PVA (no urea formaldehyde);
Description VOC<0.683 g/L.

Wood veneer or MDO bonded to a composite crossband.

LD-2 core.
[Door 1-3/4"- (44 mm)] 20 minute rating neutral or
positive pressure.
Refer to Fire Door Section of our website for details.
15/16" (24 mm) wood (mill option) or hardwood laminated
to 1" (25 mm) structural composite lumber (SCL).
Bifold.

Wood louvers not permitted in 20 minute labeled doors.
Cut-out must not exceed 40% of door area.
Minimum 5" (127 mm) from stiles or rails.
Minimum 1-1/2" (38 mm) from cut-out to cut-out.
Refer to Option Section of our website for details.
Stile and rail dimensions shown are rough sizes, before
trimming. Dimensions will vary due to prefit requirements.

Life of original installation.
See our complete warranty for details.

UV Finishing System. Stain, clearcoat, opaque and
primed finish available. Custom color matching available.
Seal top and bottom standard. No VOC.

Recycled content (LEED MRc4.1, 4.2).

March 2018 Printed in Canada 2010/12

125

Commercial Locks

LUMBER & MILLWORK

GRADE 1 LOCKS AND LATCHES Recommended Applications

DORMA’s C800 Series Grade 1 heavy-duty • Schools and Universities • Municipal Buildings
cylindrical locksets. • Hotels • Airports
• Apartments • Retail Complexes
These premium locks are built with a high performance cylin- • H ospitals and Nursing • Offices
drical chassis for all applications where ANSI A156.2 Series • Warehouses
4000 Grade 1 products are required. To meet the aesthetic Homes
needs of your project, these versatile locks are available in a • Churches
range of lever and knob trim designs — Choose between the
LR, LC, and lever designs or the KR and KB knob designs. • A ll C800 Series locks are through-bolted for additional
Made in the USA. strength and reliability.

Features • All C800 Series operating trims feature a specially de-
• A ll DORMA 800 Series locks feature advanced design con- signed freewheeling function to protect the lock from
damage caused by excessive torque applied to the lever
cepts for extreme reliability and are manufactured with the handles. When locked, the outside lever handle will move
finest materials for exceptional durability. freely through a 60° arc without operating the latch bolt.
• To ensure exceptionally smooth operation, the C800 and This free movement minimizes the opportunity for dam-
CK800 Series locks incorporate a cast stainless steel retrac- age to the lock mechanism.
tor combined with bronze roller bearings. This design pro-
vides both extremely high strength and an extended service • All C800 lever handle locks include a special, high
life for the lock mechanism. strength spring and positive stop to eliminate unsightly
• DORMA 800 Series locksets are easy to install in both wood sagging levers.
and hollow metal doors with ANSI Standard A115 prepara-
tions for cylindrical locks. • LR, LC, and LG lever designs include a special break-
away function to maintain security when the lever handles
are attacked.

DORMA’s C500 Series Grade 2 cylindrical locksets Recommended Applications

These key-in-lever locksets are built with a high performance • Hotels • Retail Complexes
cylindrical chassis for all applications where ANSI/BHMA • Apartments • Offices
A156.2 Series 4000 Grade 2 products are required. To meet • Churches • Warehouses
the aesthetic needs of your project, these versatile locks are • Municipal Buildings
available with two lever designs, four standard finishes, and
two optional finishes. Complementing the aesthetic appeal of • All C500 lever handle locks include special auxiliary sup-
the C500 are the ten different functions to help solve your port springs to insure smooth operation and long life.
challenging applications.
• C500 Series locksets have an optional through-bolted
Features chassis for additional strength and increased resistance
• A ll DORMA C500 Series locks feature advanced design to vibration (through-bolting recommended).

concepts, providing exceptional reliability, and are manufac- • All C500 Series locks are easily adjustable for doors from
tured with the finest materials, delivering enhanced durability. 1-3/8"–1-13/16" thick. Consult the factory for product
• DORMA C500 Series locks are easy to install in both wood or suggestions for thick door applications.
hollow metal doors with ANSI/BHMA A156.115 preparations
for cylindrical locks.

Stock Lever Style For Dorma Locks

3-1/2 4-3/4
(89) (121)

2-3/4
(70)

126 March 2018

Commercial Locks

LUMBER & MILLWORK

PAS]SAGE GRADE OUTSIDE/INSIDE DESCRIPTION
1 • Latch bolt operated by trim from either side at all times.
CM-158060 2
CM-77173

F75

PRI]VACY GRADE OUTSIDE/INSIDE DESCRIPTION
CM-18300 1
CM-105667 2 F76A • Latch bolt operated by trim from either side.
• Outside trim locked by push button or locking device inside.
ENT]RY GRADE • Outside trim unlocked by emergency release from outside.
CM-183001 1 • Outside trim unlocked by inside trim.
CM-182998 2 • Outside trim unlocked by closing door.
• Inside trim always unlocked.
CLASSROOM GRADE
CM-146207 1 OUTSIDE/INSIDE DESCRIPTION
CM-182997 2
F109 • Deadlocking latch bolt operated by trim from either side,
STORE ROOM GRADE except when outside trim locked by push button inside.
CM-151126 1
CM-77392 2 • Key outside releases push button, unlocking outside trim, except
when inside button pushed and turned to keep outside trim locked.

• Operating inside trim releases push button, unlocking outside
trim, except when inside button pushed and turned to keep
outside trim locked.

• Inside button must be turned to unlock outside trim.
• Inside trim always operates latch bolt.

OUTSIDE/INSIDE DESCRIPTION

F84 • Deadlocking latch bolt operated by trim from either side,
except when outside trim locked by key from outside.

• When outside trim locked, latch bolt is operated by key in
outside trim.

• When outside trim locked, latch bolt is operated by operating
inside trim.

OUTSIDE/INSIDE DESCRIPTION

• Deadlocking latch bolt retracted by key in outside trim.
• Deadlocking latch bolt operated by inside trim.
• Outside trim always inoperable.

F86

System Core Key Control Key Keyway Indicates rigid lever.
Small Format IC Blank CM-61045 CM-14843 CSSFKEY BEST A
Small Format IC Construction CM-61028 CSSFCHANGE CSSFCONTROL BEST A
Full Size IC Blank CM-68661 CSLFKEYB CM-59655 SCHLAGE C123
Full Size IC Construction CM-182974 CSLFCHANGE CSLFCONTROL SCHLAGE C123

CM-61045 CM-61028 CM-68661 CM-182974

Interchangeable Interchangeable Full Size Full Size
Core Construction Interchangeable Interchangeable
Core Construction Core
March 2018 Core
127

Commercial Exit Devices

LUMBER & MILLWORK

DORMA’s 9000 Series heavy-duty exit devices
provide superior durability for high impact
applications such as schools, universities, and
other institutional or commercial buildings.

Certification: JLM Part # Description
• Certified/listed to ANSI/BHMA 156.3, Grade 1 for exit de- CM-182999 Rim Panic Hardware
CM-76187 Rim Fire Exit Hardware
vices.
• U.L. and C.U.L. listed under their continuing reinspection Devices to be furnished with two switches in the touchbar to
provide notification when touchbar is depressed. Specify MS.
programs and conforms to standards U.L. 10C and U.B.C. Devices to have latch monitor with monitor switches in touch-
7-2 positive pressure testing. bar. Specify LM/MS.
• Complies with NFPA 101 life safety code. Fire rated devices Devices to have latch monitor with monitor switches and a
comply with NFPA 80 fire doors and windows. bypass to permit authorized exit. Specify LM/MS BP.
• Listed with the California Department of Forestry and Fire Devices to have one of the following exit alarm options:
Protection, Office of the State Fire Marshal. battery-powered exit alarm (BPA), battery-powered exit alarm
• Hurricane code approved to Miami-Dade County Florida with a 4-minute reset (BPAR), or direct hard-wired exit alarm
acceptance No. 06-912.05. (DWA).
• Florida State Building Code listed. Devices to use a vision lite shim kit to raise the device from
• Devices, trim, pulls, and levers comply with the Americans
for Disabilities Act, 1994, and ANSI 117.1-2003 for acces- the door surface to accommodate glass light molding. Specify
sible and usable buildings and facilities. GK9000.
• Contributes to U.S. Green Building Council, LEED MR Cred- All devices for labeled wood or composite doors to be
its 2.1, 4.1, 4.2 and 5.1. furnished with sex bolts. Specify SNB.
All concealed vertical rod devices installed in aluminum doors
Specification:
All devices to have heavy-duty cast chassis. All device to be furnished with appropriate brackets for aluminum door ap-
touchbar, rail, and cover assemblies shall be constructed of plications. Specify ALD (9100 only).
heavy gauge solid wrought materials for true architectural All devices to use tamper-resistant security screws. Specify TX.
finishes or color coated finishes. The partial-length touchpad All devices to be furnished with rigid trim. Specify R after trim
assembly accommodates field installation of options such number.
as cylinder dogging and exit alarm. Non-labeled units to
have hexkey dogging standard. Fire rated versions available All devices to be furnished with clutch-style lever trim. Specify
for labeled applications. Surface vertical rod devices shall C after lever trim.
have pullman type top latch bolts and round slidebolt bot-
tom latches. All devices to have deadlocking latch bolts with Finishes: Powder Coated Finishes:
3/4" throw. All units shall offer a full range of free wheeling Aluminum: 689.
operational trim, except mortise devices. All units shall offer Architectural Finishes: Bronze: 691 (Dull) or
optional rigid and clutch-style trim, where applicable. All Brass: 605 (Bright) or 606 (Satin).
devices to be furnished with appropriate mounting hardware Bronze: 611 (Bright), 612 (Satin), or 695 (Dark Duranodic).
including both wood and machine screws, as well as sex nuts 613 (Oxidized Satin Oil Rubbed). Black: 693.
where required. Nickel: 619 (Satin). Gold: 696.
Chrome: 625 (Bright) or 626 (Satin). Clear Powder Coating:
Optional Specifications: Stainless Steel: 630 (Satin). Specify P.
Non-labeled devices to have cylinder dogging. Mortise
cylinder included. Specify CD. Antimicrobial Protected Coating: Specify AM.
All surface/concealed vertical rod devices to have pullman Warranty:
type bottom latch bolt. Specify PB. 10 Years - Mechanical
All surface/concealed vertical rod devices to have extend-
ed top rod up to 10’. Specify ETR. 2 Years - Electronic integral components and accessories.
All surface/concealed vertical rod devices to be furnished
less bottom rod. Specify LB.
Devices to have electric latch bolt retraction to provide
remote access from the secure side of door. Can also be
used in conjunction with low energy/automatic door operator.
Specify ES. (ES must be powered by PS-501 power supply and use ES-
105 power transfer).
Devices to have a latch monitor to report the latch bolt
status. Specify LM.

128 March 2018

Commercial Trim

LUMBER & MILLWORK

Trim

Trim Descriptions Raised Escutcheon Plate Raised Escutcheon Plate Raised Escutcheon Plate
Curved Lever with Curved Lever with Curved Lever
Cylinder Hole
Cylinder Hole (rigid trm)

Trim Designation YC03R YC08 YC02R, YC23

Handing – – –

Function 03 or 04 08 02 or 03

Cylinder Type Included Rim (C Keyway) Mortise (C Keyway) –

JLM Part #: CM-7659 CM-68707 CM-7892

IC Mortise IC Rim Cylinder

Cylinder

JLM Part #: CM-39812 CM-182973 CM-11966 CM-41309

ANSI Function Type 1
Function
01 Description Rim Exit Device Trim Cylinder

02 Exit Only 9300B or F9300B - -
-
03 Entrance by trim when actuating bar is locked down by hex key. 9300B YC02
Rim
04 Entrance by trim when latch bolt is retracted by key. 9300B or F9300B YC03R
Key removable only when locked. Rim
Mortise
Entrance by trim when latch bolt is retracted by
08 -
key or set in retracted position by hex key. 9300B YC03R
23
Entrance by trim. Key locks or unlocks knob or lever. 9300B or F9300B YC08

23 Entrance by knob or lever (no cylinder). Trim always active. 9300B or F9300B YC23

March 2018 129

LUMBER & MILLWORK Commercial Closers & Hold Open

JLM Part #: CM-163 JLM Part #: CM-6198

* Parallel Arm only
* Push side only

JLM Part #: CM-7678
Magnetic Hold-Open

130 March 2018

Commercial Rough Opening & Handing

LUMBER & MILLWORK

Hollow Metal Frames:
Knocked Down Drywall Frame
Width: Nominal Opening Size + 2"
Height: Nominal Opening Size + 1"

Welded Frame in Block or Concrete Wall
2" Head Height
Width: Nominal Opening Size + 4 3/8"
Height: Nominal Opening Size + 2 3/8"

Width: 4" Head Height
Height: Nominal Opening Size + 4 3/8"
Nominal Opening Size + 4 3/8"

March 2018 131

Commercial Hinges

LUMBER & MILLWORK

SPRING HINGES

2079 SPRING HINGES AND FREE SWINGING HINGE SETS

1 set 2079 4-1/2" x 4-1/2" US26D (652) EDP# 82-7188 to consist of:
2 each 2060R 4-1/2" x 4-1/2" US26D , Steel
1 each FBB179 4-1/2" x 4-1/2" US26D, Steel

• For medium weight doors of average frequency
• Installer uses one box of hinges on a door up to 7' 6" (2286mm) in height
• All hinges have template screw hole location to use on either wood or

hollow metal doors and frames
• Identical pivot point for all 3 hinges
• Can be used on labeled doors (Refer to NFPA-80)
• 2060R conforms to ANSI K81071F
• FBB179 conforms to ANSI A8112

Application guide lines for 2060R – 4-1/2" Spring Hinge Location, When Using 2 Spring Hinges On a Door
Top
Door Size and Weight Number of Spring
Hinges Required CB or FBB
Hinge

For doors up to 130lbs. (59 Kg) not exceeding 2 each No. 2060R, RD2060R or RD2068R with Spring
Hinges
3' 0" x 7' 6" x 1 3/4" (914 x 2286 x 44mm) 1 each anti-friction bearing hinges of same size

Class Size Gauge Flat Head Screw
Number Open of Metal Per Se
(Inches) (MM) (Inches) (MM) Machine Wood
Bottom
2079 41/2 x 41/2 (114x114) .134 (3.4) 24-12-24 x1/2 24-12 x 11/2 CB or FBB

Typical Door Elevation Hinge Typical Door Elevation
when using 3 Hinges
when using 4 Hinges

JLM Part # Size Open Gauge of Metal Finish Flat Head Screws Application
Machine Wood
CM-148111 4-1/2 x 4-1/2 0.134 US 26D 8- 24-12 x 1/2" 8-12-1 1/4" Interior
Set includes one (1) BB hinge & two (2) self closing hinges

CM-81802 March 2018

132

LUMBER & MILLWORK

Low Profile Lite Kit for 1-3/4" Thick Doors and 3/16", 1/4" or 5/16" Glass

L-FRA100 Hollow
Metal
10C Available Options
• Powder coat color options - see color or
Materials & Finishes Wood Door
• 18 ga. cold rolled steel chart on www.ngp.com
• Mitered and welded corners • Torx Security Screws 3/8" Glazing Space
• Welded reinforcing clips at corners • Galvanneal - A40 Steel 3/16", 1/4"
• Counter-sunk mounting screw-holes • Zinc electro-plating
• #8 x 1-5/8" Phillips head SMS • Glass & Glazing tape or 5/16" GLASS
• Available in uneven and fractional sizes • Lead lining - .030" thick
• Gray Primer (GPZ) powder coat finish DOOR CUTOUT & ORDER SIZE
CUT GLASS = ORDER SIZE LESS 1"
EXPOSED GLASS = ORDER SIZE LESS 2"

JLM Part # Description 1/2"
LK62714 6 x 27 LITE KIT 1/4" GLASS 1"
LK72214 7 x 22 LITE KIT 1/4" GLASS
3/32"
*Glass included. Hollow
Metal

or
Wood Door

1 3/4"

5 KNUCKLE Ball Bearing FULL MORTISE HINGES

• For medium weight doors of average frequency
• A ll hinges have template screw hole location for use on either wood or hollow

metal doors and frames
• Equipped with two Stanley permanently lubricated non-detachable ball bearings
• Pins in non-ferrous hinges are stainless steel
• Hole in bottom tip for easy pin removal
• Reversible flush tips and pins
• Hinges can be furnished as follows:
with electric wires and/or switches (CE and/or CS)
with security studs
with non-removable pins (NRP)

JLM Part # Size Open Gauge of Metal Finish Flat Head Screws Application
Machine Wood
Interior
CM-7 4-1/2 x 4-1/2 0.134 US 26D 8- 24-12 x 1/2" 8-12-1 1/4" Interior
Interior
CM-103 4-1/2 x 4-1/2 0.134 US 26D 8- 24-12 x 1/2" 8-12-1 1/4" Exterior

CM-1620 5 x 4-1/2 0.146 US 26D 8- 24-12 x 1/2" 8-12-1 1/4"

CM-42 4-1/2 x 4-1/2 0.134 US 32D 8- 24-12 x 1/2" 8-12-1 1/4"

March 2018 133

Power Supply

PS902 Photo as shown includes optional board(s). Please
contact your local sales o ce or visit the support section
2 amp power supply on our website for configuration assistance.

Overview Features and benefits

The Schlage comprehensive line of power supplies and option boards was designed to § 2A @ 12/24 VDC constant output, field
address the changing needs of the access control market. selectable with jumper

Installation is simplified by utilizing a flat mounting design and polarized locking § Provides low-voltage, Class 2, filtered and
connectors for option boards. This design eliminates the need for racks and side regulated power
connectors. The flat mounting of the option boards also provides for easier access to
the terminal blocks for connection of electrified devices (such as electrified strikes, § Universal 120-240 VAC, fused primary input
electromagnetic locks, card readers, etc.).
§ Single polarized option board connector
Common to the line of PS900 Series power supplies is a constant output rating at both
12v and 24v settings, universal 120 VAC to 240 VAC input, and polarized option board § AC input and DC output monitoring circuit
connectors. New fire alarm interface board mounting allows outputs to be configured as with LED indicators
switched (power cut) or unswitched (power continues) when signal is provided.
§ Externally visible AC input indicator with
isolated SPDT contacts

§ High-voltage protective cover for AC circuitry
(not shown)

§ Battery back-up board auto-selects voltage

§ Optional Fire Alarm plug-in board available

§ UL 294, ULC-S318, RoHS, and FCC Part 15
certified

134 March 2018

1 INSCToALnLfOigPuTIrOaNtBioOnARoD(pSt) iINoTnOs PS902 power supply specifications
a Available option board, fire alarm and
Specification Description
RebvaiettweryAbavcakiulpabcolnenBecotioanrdlocations:
Mounting Locations (gray) Input voltage 120/240 VAC, 50/60 Hz, universal input

Output voltage 2A @ 12 or 24 VDC
Field selectable with jumper
BBK Switching supply, 5% regulation, 240mVpp max ripple

Enclosure Grey/baked enamel
14" x 12" x 4" (H x W x D)
PS902 FA Eight 1⁄2" x 3⁄4" knockouts
NEMA Grade 1
1 Hinged cover with lock down screws

Operating temperature 32° - 120°F (0° - 49°C)

Certifications ANSI/UL 294
ULC-S318
Battery 1 Battery 2 RoHS
FCC Part 15
Class 2

Exit device support BBK Battery backup 900-BB: Battery backup board only
(install on main board) 900-BBK: Battery backup kit (backup board plus battery pack)
Von Duprin QEL Up to 21
Available option boards 900-FA: Plug-in fire alarm (install on main or option board)
PS904 Von Duprin EL None 900-2RS: 2 Relay option board capable of individual or
sequential operation for single and pair door applications
PS914 Falcon EL None 900-4R: 4 Relay option board
900-4RL: 4 Relay option board with integrated logic and
1. Requires the 1useFoAf one 900-2R2S option board individual or sequential operation capability for controlling
security interlocks, auto operators, and time delay function
Battery 1 Battery 2 900-8F: Fused, 8 zone option board
900-8P: PTC, 8 zone option board

AC primary fuse size 3.15A, 250v, 5 x 20mm

Battery fuse size 7.5A 32v ATO blade style

DC output protection Overload protection - current limited foldback circuit

Indicators LED indicators:
- AC input (visible on outside of enclosure)
PS906 1 FA 2 - DC output
without 3 Isolated SPDT contacts to monitor AC power status
battery
backup Weight (power supply)

Approx. 9.0 lbs

Weight (each battery) 4.0 lbs

AC input termination 3 position terminal block with protective cover
Wire capacity: 10 AWG max.

DC output termination 2 position terminal block
Wire capacity: 12 AWG max.

BBK Option board connectors 1

Fire alarm board connector Yes

PS906 Keylock Optional

with Code: CM-80196 Accessories 900-BAT: Backup battery pack
battery

backup 1 FA 2

Allegion, the Allegion logo, Schlage, and the Schlage logo are trademarks of Allegion plc, its subsidiaries and/or affiliates in
the United States and other countries. All other trademarks are the property of their respective owners.

Battery 1 Battery 2

About Allegion © 2017 Allegion
004195, Rev. 08/17
Allegion (NYSE: ALLE) is a global pioneer in safety and security, with leading brands www.allegion.com/us
like CISA®, Interflex®, LCN®, Schlage®, SimonsVoss® and Von Duprin®. Focusing on
security around the door and adjacent areas, Allegion produces a range of solutions 135
for homes, businesses, schools and other institutions. Allegion is a $2 billion company,
with products sold in almost 130 countries. For more, visit www.allegion.com.

March 2018

Commercial Flat Goods

LUMBER & MILLWORK

JLM Part #: CM-2816 JLM Part #: CM-74719



Materials: Wrought Brass, Bronze, and Stainless Materials: Solid Cast Brass with DuraFlex Bumper
Steel with DuraFlex Bumper Other: Set consists of 1 each No. 441 and 1 each
Features: Concealed mounting, convex bumper. No. 444. for use at door with or without
Back plate prevents damage to wall threshold.
ANSI Features: Convertible for undercut or not undercut
Bumper Fastener Size Finish A156.16 doors.
Convex #8 x 1 RH WS, plastic anchor 2-1/2" dia., 3/4" projection 32 D L02101 ANSI
Fastener Base Height Finish A156.16
dome stop: 1/4" h x 2" dia N/A 1-1/8" or 1-1/2" 32 D L02141/
JLM Part #: CM-74720 riser: 3/8" x 2" dia. L02161

JLM Part #: CM-2706


Materials: Wrought Brass, Bronze, and Stainless

Steel with DuraFlex Bumper Materials: Brass
Features: C oncealed mounting, concave bumper. Finish: Chrome (CRM)
Other: Installation - drill 9/16" hole
Back plate prevents damage to wall

ANSI
Bumper Fastener Size Finish A156.16
Concave #8 x 1 RH WS, plastic anchor 2-1/2" dia., 3/4" projection 32 D L02251
For Door ANSI A156.16
1-3/8" to 2-1/8" Us26 L03221, l03172

JLM Part #: CM-32912
JLM Part #: CM-43669
Latch Protector 32D


Standard Size Finish ANSI A156.16
4" x 16" 32 D J301

JLM Part #: C M-14017


Materials: Aluminum, Brass, Bronze, Stainless Steel
Fasteners: 1/4-20 Thru Bolt, #6 x 5/8 OH SMS
Options: Barrier Free available in 2-1/2" clearance
— use BF prefix when ordering
(BF102 x 70C) JLM Part #: CM-14035

No. 555
Materials: Brass
Finish: US26D, Satin, Chrome
Pull CTC Plate Size Finish ANSI A156.16 Fastener: 8 ea, #8 x 3/4 FH combo Screws
3/4" Dia. 8" 70 4" x 16" 32 D J405 Features: • Fits ANSI A115 door and frame prepara-

tion
• 3/4" bolt throw, 3/4" rod backset
JLM Part #: CM-74718 • 1 2" rod length (center of face to bolt end

- retracted)
• 1-1/2" adjustable bolt head.
Materials: .050" thick Aluminum, Brass, Bronze, Stainless
Steel
Finishes: Stainless Steel
Fastener: #6 x 5/8 TH SMS
Ordering: Specify height x width x finish code. Add any JLM Part #: CM-14036

options.
Weight: 8" x 34" = 4.0 lbs. Materials: Brass
ANSI: J 101- metal armor plate. J102 - metal kick plate, Fastener: Adjustable Nut;
Kick Plate Spanner Wrench;
J103 - metal stretcher & mop plate. 8"h x 34"w 2 ea. #8 x 1 OH SMS, 2 ea. Plastic Anchors
2 ea. 8-32 x 3/4 OH MS, 2 ea. Lead Anchors
JLM Part #: CM-74718 US32D Features: • W orks with all Rockwood maual and
B3E

automactic flush bolts
ACDFSMehoniamamesttlieeufparnrpeiiesa5taisli6oc:t: o nk3rs: p: ar t: M O21Sre0tneqee1eue1tils/7rs4ei0zA"m0eNx,ef3Son10Irt5s91a/25(l8lw6p.h3ae,inrTsyuopsfeedd2o1woritshucpartroy8b'awr)ide o lds • Removable face plate for use with thresh-

• Adjustable height for carpeted areas.

Size Finish ANSI A156.16
Face Plate 1-3/8" x 2-7/8" 26 D L04021
Barrel: 7/8" dia. x 2" depth

Finishes: 622
Fastener: 6 ea. #10-32 x 1 1/2" MS, 6 ea.#10 x 1 3/4" SMS
Additional Non-handed, Stop mounted, Mounting brackets
Information: not required when using stop mounted hardware.

136 March 2018

Commercial Weather & Sound Seal Products

LUMBER & MILLWORK

H JLM Part #: C M-11854 = 17’
W CM-11853 = 20’

Jamb Weatherstrip

Saddle Thresholds

JLM Part #: CM-85 = 36" Size: 5" x 1/2"
CM-157 = 72" Size: 6" x 1/2"
CM-11821
Size: 7" x 1/2"
CM-1004

JLM Part #: CM-7684 305CR Stock - Clear Anodized

JLM Part #: C M-86 = 36"
CM-17851 = 48"

Door Sweep

Saddle Thresholds 315CN
Stock - Clear Anodized
Stock - Mill Finish Size: 5" x 1/4"

JLM Parts #: C M-1083
CM-11347

Drip Cap

Stock - Clear Anodized

JLM Part #: CM-68662 JLM Part #: CM-11428

EF-86 Pair Weatherstripping
Mortise Pocket
edge filler plate Stock - Clear Anodized

JLM Part #: CM-31086

JLM Part #: CM-68663 JLM Part #: CM-654

FPK-161 US26D 305CN
For 161
cutout Strike Plate JLM Part #: C M-152 = 17’
CM-281 = 20’
Cylindrical Prep ST-214-RC ST-161
filler kit Replacement strike Standard ANSI Smoke/Sound Seal

Pemko Door Bottoms: 2-1/4­­ " x 1-1/­­4" 4-7/­8­ " x 1-1/­­4"
Automatic Door Bottoms
J4L1M1APPKaLrt #: CM-52918 Pemko Astragals & Meeting Stiles:
Meeting Stile Gasketing
AVAILABLE FINISHES: A
WIDTH: 9/16” (14.3 mm) JL3M69_PPart #: CM-89385
HEIGHT: 13-/8” (34.9 mm)
AVAILABLE FINISHES: A, D, G
PROFILE WIDTH: 5/32” (4.0 mm)
TOTAL WIDTH WITH INSERT: 11/32” (8.8 mm)
HEIGHT: 13/32” (10.3 mm)

A (Mill Finish Aluminum)

A (Mill Finish Aluminum) Stock - Clear Anodized
D (Dark Bronze Anodized Aluminum)
G (Gold Anodized Aluminum)

March 2018 137

LUMBER & MILLWORK Typical Commercial Hardware Configuration

Interior Single Office Door

QTP Description Product Finish Mfg JLM Code

3 Hinges FBB179 4-1/2 X 4-1/2 US26D ST CM-7
CL853J LCC 626 DM CM-18300
1 Lockset 77 BA-KWY 626 DM CM-61045
1 Cylinder Core 1445 RO CM-74719
1 Dome Stop 608 US26D RO CM-23
3 Door Silencers GREY

••Restroom: Substitute privacy set, closer and wall stop for lockset, cylinder and floor stop.

Interior Single Public Bathroom Door

QTP Description Product Finish Mfg JLM Code
3 Hinges FBB179 4-1/2 X 4-1/2 US26D ST
1 Door Pull 7116 US32D RO CM-7
1 Push Plate 70 4 X 16 US32D RO CM-14017
1 Closer 8616 AF86P SNB1 DM CM-32912
1 Wall Bumper 410 689 RO CM-163
3 Door Silencers 608 US32D RO CM-2816
GREY CM-23

Interior Single Apartment Entrance Door

QTP Description Product Finish Mfg JLM Code

1 Spring Hinge Set 2079 4-1/2 X 4-1/2 US26D ST CM-148111
1 Protection Plate 90 US32D RO
1 Dome Stop 1445 US26D RO CM-74718

1 Door Viewer 1808 US15 RO CM-74719

1 Smoke Seal S88 D 17’ PE CM-2706

1 Threshold 271 A 36" PE CM-152

CM-7684
Alternate configurations include a door closer in lieu of spring hinges and/or an interconnected lock in lieu
of an entry lockset.

Interior Single Fire Rated Stair Door or Assembly Egress

QTP Description Product Finish Mfg JLM Code
3 Hinges ST
1 Exit Device FBB179 4-1/2 X 4-1/2 US26D DM CM-7
1 Exit Device Trim F9300B 630 DM CM-76187
1 Closer YC23 630 DM CM-7892
1 Protection Plate 8616 AF86P SNB1 689 RO CM-163
1 Wall Bumper 90 US32D RO CM-74718
1 Smoke Seal 1407 US32D PE CM-74720
1 Door Bottom S88 D 17’ PE CM-152
1 Threshold 315 CN 36" PE CM-86
271 A 36" CM-7684

••Alternate configurations include a passage set in lieu of an exit device.

138 March 2018

LUMBER & MILLWORK Typical Commercial Hardware Configuration

Exterior Single Door

QTP D escription Product Finish Mfg JLM Code
3 Hinges ST
1 Exit Device FBB191 4-1/2 X 4-1/2 NRP US32D DM CM-42
1 Exit Device Trim 9300B 630 DM CM-182999
1 Closer YC03R 630 DM CM-7659
1 Protection Plate 8616 DS SNB1 689 RO CM-619
1 Raindrip 90 US32D PE CM-7471
1 Weatherstrip 346 C 40" PE CM-1083
1 Door Bottom 305 CR 17" PE CM-11854
1 Threshold 315 CN 36" PE CM-86
176 A 36" CM-1004

••Alternate configurations include a storeroom lockset in lieu of an exit device.

Interior Pair Storage Room Door

QTP Description Product Finish Mfg JLM Code
6 Hinges FBB179 4-1/2 X 4-1/2 US26D ST
2 Flush Bolts 1555 US26D RO CM-7
1 Lockset CL880J LCC DM CM-14035
1 Cylinder Core 77 BA-KWY 626 DM CM-151126
1 Dust Proof Strike 570 626 RO CM-61045
2 Door Silencers 608 US26D RO CM-14036
GREY CM-23

••Exterior: Substitute stainless hinges and weatherstrip for steel hinges and smoke seal. Add latch protec-
tor.

Interior Pair Fire Rated Storage Room Door

QTP Description Product Finish Mfg JLM Code
ST
6 Hinges FBB179 4-1/2 X 4-1/2 US26D RO CM-7
2 Flush Bolts 1555 US26D DM CM14035
1 Lockset CL880J LCC 626 DM CM-151126
1 Cylinder Core 77 BA-KWY 626 DM CM-61045
2 Closer 8616 AF86P SNB1 689 RO CM-163
1 Dust Proof Strike 570 US26D PE CM-14036
2 Astragal 305 CN 84" PE CM-11428
1 Smoke Seal S88 D 20’ PE CM-281
2 Door Bottom 315 CN 36" PE CM-86
1 Threshold 171 A 72" DM CM-157
1 Latch Unit (non-stock) 18262 626

••Latch Unit: NFPA 80 Requires a ¾" throw latch on all fire rated pairs.

March 2018 139

PLAIN SAWN UNFINISHED OAK FLOORING

SELRED SELWHITE Weaber’s unfinished Oak flooring is How Do I Estimate The Amount Of Oak Hardwood
precision machined to full 3/4” thickness Plank Flooring Needed?
314SELRED and is available in 2-1/4” and 3-1/4” strip
and 4-1/4”, 5-1/4”, and 6” plank widths. You must first determine the total sq. ft. of the area or room
Appalachian Red Oak and White Oak is where the hardwood plank flooring will be installed. To do this
used in the manufacturing of our unfinished you will multiply the length times the width of the area or room
flooring. in feet.
Unfinished Oak flooring is avail-
able in Clear, Select, #1 Common and example: 10' wide X 10' long = 100 sq. ft.
#2 Common NOFMA certified grades.
Quartered/Rift Select Oak flooring is also Next you will need to add approximately 5% for normal waste.
available. example: 100 sq. ft. X 1.05 (5%) = 105 sq. ft.

Please note - additional flooring should be estimated for
diagonal applications, irregular rooms, bay windows and other
projects.
Once you have the square footage required including the 5%
waste factor divide the square footage by the factor below and
round up to the next whole number.

2-1/4" strip flooring = 21 sq/ft per bundle
3-1/4" strip flooring = 22.75 sq/ft per bundle

this will give you the number of bundles required.

How Should The Plank Flooring Be Handled
Prior To Installation?

Due to the natural characteristics of solid plank flooring, extra
precaution should be taken for the best results. The flooring
should be acclimated to the installation area for a minimum of 3
to 4 days prior to installation. This will allow the moisture content
of the flooring to match that of the installation area thus minimiz-
ing future dimensional changes and cupping.

Specifications Is Color In Oak Hardwood Plank Flooring Con-
sidered A Defect.
Thickness 3/4”
No. Since hardwood plank flooring is a natural all wood product,
Width 2-1/4”, 3-1/4” color variations are not considered a defect.

Species Oak What Can Be Done To Help Eliminate Or Reduce
Cupping In Plank Flooring?
Red Oak Natural Janka Hardness Rating N/A
Kiln-dried wood board which are subject to moisture only on
Edge Description Microbeveled one side will expand on that side, and will warp by bending
away from the moist side. Hardwood Plank flooring will cup for
3-1/4” Prefinished End Description Microbeveled one reason and one only - from gaining or losing moisture on
natural red oak one side faster than the other. This can be minimized by taking
APP314 20 SF/Box *Cartons may include random lengths the following precautions: Proper acclimation of the flooring
before installation and the use of proper underlayment. I.E.
15# felt or rosin paper .

2 -1/4” Prefinished Features:
APP214 natural red oak
20 SF/Box • Microbeveled edges and ends
• Installation methods: nail, staple
• Select grade Does Oak Hard wood Plank Flooring Have Beveled

Edges??
No. Beveled edges are generally applied to pre-finished floor-
ing. Unfinished hardwood is square edged.

Evershine™ offers you: What Is The Nailing Procedure For Installing Oak

• 35 year warranty on wear through Hardwood Plank Flooring.
• S even coats of UV cured polyurethane
• A dvanced Naotechnology & Aluminum The general practice is to blind nail through the tongue and
with conventional strip flooring. Some installers also counter-
Oxide sink one or more flat head screws, No. 7 - No. 9 Phillips head
• Ultra-fresh™ anti-microbial additive or dry wall screws at the end of each plank and at intervals
along the plank to hold it securely. Cover the screw with wood
plugs & glue into holes. Be sure the screws are the right
length.

140 March 2018

Lumber and Building Material

LUMBER & MILLWORK

March 2018 141

LUMBER & MILLWORK

Framing Material

STUD GRAD E, #2 & BTR SPF AND DF

88" 92 5/8" 8' 104 5/8" 10' 12' 14' 16' 18' 20' 22' 24'

2 X 4 SPR2474 SPR2492 SPR248 SPR249 SPR2410 SPR2412 SPR2414 SPR2416

2 X 6 SPR2674 SPR2692 SPR268 SPR269 SPR2610 SPR2612 SPR2614 SPR2616 SPR2620

2 X 8 SPR288 SPR2810 SPR2812 SPR2814 SPR2816 SPR2818 SPR2820
2 X 10
SPR2108 SPR21010 SPR21012 SPR21014 SPR21016 SPR21018 SPR21020 SPR21022 SPR21024
2 X 12
SPR2128 SPR21210 SPR21212 SPR21214 SPR21216 SPR21218 SPR21220 SPR21222 SPR21224
2 X 4
WANE FREE PREMIUM STUDS

248SPECIAL

EASTERN SPRUCE Douglas Fir Dimension &
Rough Green 8’ 10’ 12’ 14’ 16’ Timbers #2 GRN
1 x 8
2 x 10 RSPR18 The following items are available in varying
lengths 12’ - 40’ with a 48 hour notice
RSPR21016 Dimensional also available
Kiln Dry 8’ 10’ 12’ 14’ 16’
1 x 3 Premium EE strapping SPR138 SPR1310 SPR1312 SPR1314 SPR1316
as 16' & 20' select structural

1 x 8 SPR1816 2 x 6 6x6
GREEN HEMLOCK D4S 3&BTR HT 2 x 8 4 x8 6 x 8 8 x 8
4 x 4
SPR4412 SPR4416 2 x 10# 4 x 10 6 x 10 8 x 10 10 x 12
4 x 6 SPR4616 2 x 12# 4 x12 6 x 12 8 x 12 12 x 12

DOUGLAS FIR 1&BTR S4S FOHC KD 6 x 14 8 x 14 14 x 16

8’ 10’ 12’ 16’ 28’
4 x 4 DF448 DF4412 DF4416
4 x 6 DF468 DF4612 DF4616

2 x10 DOUGLAS FIR 2&BTR KD
DF21028
2 x 12 DF21228

Engineered Lumber

Laminated Veneer Lumber (LVL)

12' 14' 16' 18' 20' 24' 26’ 28' 32' 36' 40'
1-3/4 x 7-1/4” LVL716

1-3/4 x 9-1/4” 914LVL16 914LVL24

1-3/4 x 9-1/2” LVL912 LVL914 LVL916 LVL920 LVL928

1-3/4 x 11-7/8” LVL1114 LVL1116 LVL1118 LVL1120 LVL1124 LVL1128

1-3/4 x 14” LVL1420 LVL1424
1-3/4 x 16” LVL1624

1-3/4 X 18” LVL1826

RFPI 40S Solid-Sawn I-Joist RFPI40S1228 RFPI40S1232 RFPI40S1236 RFPI40S1240
2-1/2 x 11-7/8” RFPI40S1224

OSB RIM BOARD

1-1/8 x 9-1/2” OSBRIM1212

1-1/8 x 11-7/8” OSBRIM1212

1-1/8 x 14” OSBRIM1412

1-1/8 x 16” OSBRIM1612

142 March 2018

LUMBER & MILLWORK

Panels: Plywood & OSB
4 X 8 SHEETS

TYPE 1/8” 1/4” 3/8” 1/2” 5/8” 3/4” 1”

ACX Fir S1S ACX4814 ACX4838 ACX4812 ACX4858 ACX4834

AAX Fir S2S AAX4834 AAX481



Plum Creek Underlayment Fir B Crossband ULF4838 ULF4812

T&G Premium Underlayment Fir FIRTG

Underlayment Fir C Crossband ULF4858 ULF4834

CDX Sheathing Fir 4-PLY CDXF4838 CDXF4812 CDXF4858 CDXF4834

CDX Sheathing Fir 5-PLY CDXF5PLY12



Southern Yellow Pine Textured T 1-11 T11P4858



Lauan LAU4818 LAU4814

SurePly Underlayment SUREPLY



A-B Marine AB4834

Pressure Treated .40 CDX ODP4812 ODP4834

Fire Retardant (Interior Use) FRP4812 FRP4858 FRP4834



Red Oak VC OAK4814 OAK4812 OAK4834

Birch VC BIR4814 BIR4812 BIR4834



Primed MDO (Medium Density Overlay) G1S MDO4812

MDO (Medium Density Overlay) G2S MDO4834

MDF (Medium Density Fiberboard) Lite Weight MDF4812 MDF4834

MDF Beadboard Primed 2” oc BEADBOARD

White Melamine G2S MELWHITE4834



Wackywood 4X8 (Short Grain Tube) WACKYWOOD48
Wackywood 8X4 (Long Grain Can) WACKYWOOD84

7/16” 15/32” 5/8” 3/4”
OSB 716OSB 1532OSB 58OSB 34OSB
Premium OSB
NOTE: All plywood thickness are nominal and are slightly less than indicated 34TN350

Metal Studs & Gypsum

METAL STUDS 8’ 10’ 12’ 14’ 16’ 10’ Runner

3 5/8” 20 gauge MS358820G MS3581020G MS3581220G MS3581420G MS3581620G MR3581020G
3 5/8” 25 gauge MS3588 MS35810 MS35812 MR35810

GYPSUM 1/4” 3/8” 1/2” 5/8”

4 x 8 Drywall 14SR GYP4838 GYP4812 GYP4858

4 x 10 Drywall GYP41058

4 x 12 Drywall GYP41212 GYP41258

4 x 8 Blueboard BLUE4838 BLUE4812 BLUE4858

4 x 12 Blueboard BLUE41212 BLUE41258

4 x 8 Water Resistant WR4812

Shaftliner, Cement Board & Accessories

DESCRIPTION CODE DESCRIPTION CODE
2 X 12 X 1” EXP Shaftliner
4X8 X 5/8 Dens Glass Gold EXPSHAFTLINER 3’ X 5’ X 1/4” Hardie Backer 35HB
4 X 5 X 1/2 Denseshield
2 1/8” X 10 25GA C Runner DENSGLASS4858 3’ X 5’ X 1/2” Hardie Backer HB3512
2 1/16” X 12’ 25GA H Stud
Breakaway Clips DENSE 3’ X 5’ X 1/2” Permabase DUROCK
March 2018
CRUNNER

HSTUD

BREAKCLIP 143

LUMBER & MILLWORK

TM

Description

AdvanTech Flooring and Sheathing AdvanTech® flooring delivers the total performance package
of strength, fastener holding, moisture resistance, and quality. AdvanTech panels help eliminate
floor bounce and squeaks by delivering the highest Building Code recognized design bending

strength in the industry combined with high surface density to keep fasteners securely in place. For
moisture resistance, AdvanTech flooring – backed by a 500 day no sand guarantee and lifetime

limited warranty - has one of the lowest water absorption rates in the wood-structural panel Industry.
AdvanTech flooring has been voted number one in quality for 12 consecutive years by builders. 

Basic Uses

Advantech is the first structural-use panel with proprietary design capacities, which are

superior to the design capacities of commodity PS-2 panels.  They are used in both residential

and commercial construction for floor, roof and wall sheathing applications. AdvanTech Flooring

panels are used for both single-layer and sub-floor applications as well as roof sheathing. AdvanTech

Sheathing panels are used for roof and wall sheathing as well as sub-flooring in two-layer systems.

THE AdvanTech® FLOORING AND SHEATHING LIMITED WARRANTY

FOR THE BUILDER AND CONTRACTOR:

Huber Engineered Woods (HEW) warrants to the original retail purchaser that its AdvanTech flooring
and sheathing will not delaminate nor require sanding due to moisture absorption during installation.

FOR THE CONSUMER:

Peace of mind. The AdvanTech flooring and sheathing panels used in your home are guaranteed
to be free of manufacturing defects for a period of 50 years from the date of manufacture.

Floor Coverings www.Huberwood.com

• Carpet and pad: May be installed directly over AdvanTech and Defining Innovation
Huber Blue flooring panels.
4 x 8 Sheets Code
• Vinyl: A minimum 1/4” underlayment is recommended. Follow
finished flooring manufacturer instructions. 3/4” T&G Subfloor ADVAN4834

• Hardwood floors: May be applied directly over 23/32” AdvanTech 5/8” T & G ADVAN4858TG
flooring panels. For Huber Blue flooring, the National Wood
Flooring Association (NWFA) and the National Oak Flooring
Manufacturers Association (NOFMA) recognize the use of
23/32” OSB subfloor under hardwood flooring.  For installation
of the hardwood flooring follow the recommendations of the
manufacturer.

• C eramic tile: Underlayment is required per ANSI Standard
A-108 with noted exception of 1-1/4” cement mortar application
method.

• Lightweight concrete: May be applied over AdvanTech and
Huber Blue flooring following lightweight concrete manufac-
turer’s instructions.

144 www.advantechperforms.com March 2018

LUMBER & MILLWORK

ZIP IT TIGHT: The Fastest Way to the Perfect Tight House
Discover ZIP System® Sheathing and Tape. It’s a one-of-a-kind structural roof and wall system with a
built-in energy-efficient barrier that keeps moisture out and reduces air leakage, while still allowing
panels to properly dry. Plus, it goes up in just two easy steps: 1. Install the panels, 2. Tape the seams.
Fewer steps results in 40% faster installation when compared to traditional housewrap and felt.

ZIP System® R-Sheathing 5-in-1 System with Layers of Innovation
For installation convenience and exceptional, long-term performance, the all-in-one ZIP System®
R-Sheathing panel provides a new approach to sealing and insulating the building envelope. One
panel delivers thermal, air and moisture resistance, while providing excellent strength and durability.

Where Code Meets Comfort

Structure, insulation and weather protection — all in one panel.
An innovative panel that makes insulating homes simple, ZIP System® R-sheathing is where Code Meets
Comfort. Each panel delivers added R-value combined with superior air and moisture resistance and
exceptional strength and durability. Installation is a quick, two-step process that eliminates the need
for additional exterior insulation and housewrap. And with multiple insulation thicknesses available, ZIP
System® R-sheathing panels make it easy to build a tight, insulated, water-resistant enclosure whether
you’re building to new energy codes or advanced building envelope performance.

Three thicknesses. Two colors. It’s one panel that can do it all.
The ZIP System® product line is designed to streamline work on the jobsite. Three panel
thicknesses let you choose the strength and protection you need for your build. Each one is
engineered for use on both roof and wall applications, meaning one panel is all you need.

4 x 8 Sheets Code Accessories/Tools Code
7/16” Green Zip Combo ZIPWALL716
1/2” Orange Zip Combo ZIPROOF12 Acrylic Flex Tape ZIPFLEXTAPE
5/8” Green Zip Combo ZIPROOF58
Zip R6 Sheathing 4” x 90’ Zip Tape ZIPWALLTAPE
ZWR6
March 2018 6” x 90’ Zip Tape 6ZWT

Zip Liquid Flash 29 oz Tube ZIPLIQUIDFLASH

Zip Tape Gun ZIPWALLGUN

www.zipsystem.com 145

LUMBER & MILLWORK TIPS

BUILDER

Cut Callbacks
with Proper Spacing

Spacing Recommendations for APA Rated Sheathing, APA Rated Sturd-I-Floor®, and APA Rated Siding.
Wood structural panels (plywood and OSB), like all wood products, will expand or shrink slightly with changes in
moisture content. If expansion is prevented by tightly butted panel joints, buckling can occur. And that can mean costly,
time-consuming callbacks. To assure best performance, follow these panel spacing and nailing recommendations.

Spacing Hint. A 10d box nail may be used to gauge 1/8-inch spacing between panels. Spacer-type panel edge clips
may also be used for roof sheathing applications.

NOTES:
Panel spacing is an APA RECOMMENDATION, to provide installers with a means of minimizing the potential for panel buckling; however,
it is not a requirement. Some manufacturers may require a space at the time of installation. Panel buckling may be an aesthetic or
serviceability issue but is not a structural deficiency. There is no reason to expect this recommended space to be maintained when the
panel becomes acclimated. Gaps that were initially present may have closed due to normal moisture-related expansion. If the flatness
of sheathing or flooring panels is acceptable, APA would generally recommend that any finish flooring, siding or roofing be installed as
planned regardless of whether gaps are present.

Edge Joints: 1/8" spacing End Joints:
is recommended at all panel 1/8" spacing is
edge joints unless otherwise recommended
recommended by the at all panel end
manufacturer. joints unless other-
wise recommended
by the manufacturer.

EXAMPLES OF TONGUE-AND-GROOVE (T&G) JOINTS*

1/8" space Approximately
1/16" space

In Glued Floor Systems, use adhesives conforming with AFG-01 or ASTM D3498.

* T&G profiles and installation recommendations can vary among APA members. Check with individual
manufacturer for specific recommendations – otherwise, APA recommends 1/8" spacing at all panel edges.

146 March 2018