MS Series

Reifenmontiergeräte
Tyre Changers

MS 43 –

preiswert in die Profiliga
professional quality and good value

• Profigerät mit Top-Preis-/ • Professional appliance offering ­­
Leistungs­verhältnis top-rate price-performance ratio

• Für alle Standardräder mit • For all standard aluminium
Alu- und Stahlfelgen and steel rims

Fahrwerkvermessung Bremsenprüfung Prüfstrassen Reifenmontiergeräte
Wheel Alignment Brake Testers Vehicle Testing Tyre Changers

MS 43 – preiswert in die Profiliga
MS 43 – economical yet in the professional l

Das Reifenmontiergerät MS 43 ist unser The MS 43 tyre fitting device is our starter
­Einstiegsgerät für professionelles Arbeiten appliance for professional tyre and wheel
mit Reifen und Rädern. Sie bietet neben work. It‘s easy to use, makes efficient use
einfacher Bedienung und effizienter of technology, and also gives a top rate
Technik ein Top Preis-/Leistungsverhältnis. price-performance ratio. And it goes with­
Höchste Qualitäts- und Servicestandards out saying that it comes with maximum
verstehen sich von selbst. quality and service too.

Radwuchtmaschinen Klimaservicegeräte Hebebühnen Vernetzung Reifenmontiergeräte
Wheel Balancers AC Service Units Vehicle Hoists Networking Tyre Changers

league

123

456

1. S erienmäßig: Kunststoff-Felgenschoner zum Aufstecken 1. Also standard equipment: Plastic rim cover with metal fixing
auf die Reifenabdrück-Schaufel. (766 102 090) hook for attachment to the bead breaker plate. (766 102 090)

2. O ptional: Wulstniederhalterplatte, felgenschonende 2. O ptional: Bead retainer for safe tyre fitting of the RFT‘s.
Montagehilfe. (hoch 766 103 216 - flach 766 103 261) (spacing wedge high 766 103 216 - low 766 103 261)

3. Optional: Motorrad-Set für Räder bis 23” Durchmesser. 3. O ptional: Motorcycle set for wheels up to 23” diameter.
(766 101 607) (766 101 607)

4. Serienmäßig: Kunststoff-Schutzbacken für Alufelgen. 4. Also standard equipment: Plastic jaw covers to protect
(766 101 402) alloy wheels. (766 101 402)

5. Serienmäßig: Kunststoffgleitstücke für den Montagekopf, 5. Also standard equipment: Plastic mounting head cover,
5 Stück. (766 101 608) 5 pieces. (766 101 608)

6. O ptional: Quickfüller-Lufttank zum schnellen Befüllen 6. O ptional: Rapid inflation tank.
von Reifen. (766 103 858) (766 103 858)

Detail Info Detailed information

• E infache Bedienung durch effiziente Technik • E fficient technology equals easy operation
• K omplette Ausstattung inklusive pneumatischer • Completely equipped unit, including pneumatic

Reifenabdrückvorrichtung bead breaker
• Felgenschonende Montage durch mechanische • Gentle fitting and unseating of tyres by

Felgenfreistellung mechanic rim release
• Nur eine felgenferne Einstellung des Montierar- • R equires only one setting of the fitting arm,

mes für den ganzen Rädersatz away from the rim, for the entire wheel set
• Serienmäßige Wartungseinheit mit Wasserab- • Maintenance unit as standard, with water trap, air

scheider, Luftöler und Druckminderer lubricator and pressure reducer with pressure gauge
• Elektrischer Vor- und Rücklauf des Spanntellers • Electrically-driven clamping plate with forward
• S chnellbefüllung über Füllschlauch auch
and reverse action
nachrüstbar • Rapid inflation through inflating hose,

retrofittable

Technische Daten Technical data

Anwendungsbereich 10‘‘ - 20‘‘ Scope 10‘‘ - 20‘‘
Felgenaußenspannung 12‘‘ - 22‘‘ Outside rim clamping 12‘‘ - 22‘‘
Felgeninnenspannung 15‘‘ - 23‘‘ Inside rim clamping 15‘‘ - 23‘‘
Motorrad-Räder 3‘‘ - 10‘‘ Motorcycle wheels 3‘‘ - 10‘‘
Max. Felgenbreite 1.000 mm Rim width 1,000 mm
Max. Raddurchmesser Max. wheel diameter

Pneumatikeinheit 2.500 kp Pneumatic unit 2,500 kp
Max. Abdrückkraft Bead breaking force

Pneumatik 8 -12 bar Pneumatic 8 -12 bar
Arbeitsdruck Working pressure

Motor Motor

Stromversorgung 3 x 400 V, 50 Hz electric power supply 3 x 400 V, 50 Hz

(andere Spannungen auf Anfrage) (non-standard voltages on request)

Motorleistung 0,55 kW Drive power 0,55 kW

Spannteller 8 U/min Clamping table 8 rpm
Drehgeschwindigkeit rotation speed

Abmessungen 1.740 mm Dimensions 1,740 mm
Höhe 950 mm height 950 mm
Tiefe 760 mm depth 760 mm
Breite width

Arbeitsplatzbedarf Operating space requirement
Tiefe
Breite 1.500 mm depth 1,500 mm
2.000 mm
width 2,000 mm

Gewicht 184 kg Weight 184 kg

Änderungen in der Technik und Ausstattung We reserve the right to modify technical specifications
bleiben vorbehalten. and equipment.

Ihr Händler vor Ort: Beissbarth GmbH B/Drucknorm 057/04.2008 - 906 436 000 DE - EN
Local distributor: Ein Unternehmen der Bosch-Gruppe
A Bosch Group Company
Hanauer Straße 101
80993 München (Munich, Bavaria)
Germany

Tel. +49-89-149 01-0
Fax +49-89-149 01-240

www.beissbarth.com
[email protected]

Tyre changer

MS 500 - 530

Best in class for tyre specialists

• 20” and 22” External clamping
• G-Frame rigidity
• Simple and reliable
• Side Lift NG

MS 500 - 530
Tilting back tyre changer

MS 500 and MS 530 are pneumatic tilting back pole passenger car tyre changers.

MS 500 is equipped with a 20” (external clamping) round turntable single speed while
MS 530 is equipped with a 22” turntable double speed; both are provided with pneumatic
locking of mounting head and pneumatic bead breaker.

Assembled with the Tecnoroller NG helper system makes for a really safe and easy mounting
and demounting operation of any kind of tyres, even the most difficult UHP or RFT.

MS 500 and MS 530 are the right equipment to work with performance without
sacrificing comfort.

They are especially designed for medium volume workshops.

Both tyre changer platforms can be upgraded with the Side Lift NG which allows the
operator to always work in an ergonomic position. The Side Lift NG is mounted on the
right side of the machine next to the bead breaker which allows for improved productivity.
The lift is also equipped with an integrated roller board which leads to an easier and faster
bead breaking operation.

Highlights
Longevity and Rigidity
New G-frame concept, new design of jaws and turntable.
Flexibility
Possibility to work with any kind of car, light commercial vehicle and motorcycle (with
special accessory kit) wheels: max wheel diameter 1000 mm and max wheel width 11”.
Safe
P lastic pole protection with integrated holders for tools and valves.
Easy to use and fast
• N ew ”worldwide standard” positioning of the control pedal in order to avoid misuse or

error by using other similar products
• P rovided with inflating system controlled by gun equipped with scale manometer bar/psi
• T ubeless inflating system directly mounted in the turntable jaw and controlled by side

pedal allowing a stronger air flow (only for MS 500 IT/MS 500 IT V1 and MS 530 IT/
MS 530 IT V1 models)
• Bead breaker pad shape designed in order to protect the rim
• Lubricant bucket holder (adjustable for every bucket size and position)
• T ecnoroller NG, 2 independent pressing points helper arm (MS 500 IT V1 and MS 530 IT V1).
A 3rd pressing point is available as accessory
• The second speed in MS 530 is selected by pedal
• Side Lift NG as accessory with integrated roller board

2

Tyre changer

Range of application MS 500 MS 530 Scope of delivery
3 Ph – 400 V 50 – 60 Hz • 1x Bead lever
Main connections 1 Ph – 230 V 50 Hz 3 Ph – 400 V 50 – 60 Hz • 1x Jaws plastic protection kit
1 Ph – 110 V 60 Hz 3 Ph – 230 V 50 – 60 Hz
Outside rim clamping 10” – 20” (V1 version)
Inside rim clamping 12” – 23” 10” – 22” • 5x Tongue protection for
Rim width 3” – 11” 12” – 25”
Max. wheel diameter 1000 mm 3” – 11” demounting head (V1 version)
Bead breaker range 65 – 300 mm 1000 mm • 1x Wing side protection for
Air connection 8 – 10 bar 65 – 300 mm
Speed of rotation 7,5 rpm 8 – 10 bar demounting head (V1 version)
Dimensions max. (H x D x W) 1860 x 1660 x 1200 mm 7 – 15 rpm • 1x Bead breaker plastic protection
1860 x 1660 x 1800 mm (V1) 1860 x 1660 x 1350 mm
Net weight 223 kg 1860 x 1660 x 1950 mm (V1) (V1 version)
230 kg • 1x Tecnoroller NG (V1 version)
• 1x Lubricant brush

3

Accessories

PN: 1695 101 402 PN: 1695 101 502 PN: 1695 101 608 PN: 1695 102 725

Jaws plastic protection (for MS 500) Jaws plastic protection (for MS 530) Demounting head tongue protection Mounting tool cover

PN: 1695 106 152 PN: 1695 105 191 PN: 1695 103 211 PN: 1695 102 584

Plastic protection for bead breaker Plastic rim protection Plastic mounting/demounting head Storage kit
suitable PN: 1695 103 210 complete with adaptor PN: 1695 103 543

PN: 1695 101 518 PN: 1695 103 542

Bead breaking bearing motorbike Motorbike mounting head kit Scooter adaptors for MS 500 Motorbike/scooter adaptors
wheel PN: 1695 106 190 PN: 1695 101 372 (for MS 500)

PN: 1695 101 575 PN: 1695 903 403

Motorbike/scooter adaptors Roller board External IT kit Tecnoroller NG
(for MS 530) PN: 1695 103 261 PN: 1695 103 216 PN: 1695 107 466

PN: 1695 105 190

Mounting lever (WdK-Model) Bead pressing device (thin) Bead pressing device (thick) Side Lift NG
PN: 1695 108 055

Pressing point 05.2016 - 1 693 604 026

Beissbarth GmbH
A Bosch Group company
Hanauer Straße 101
80993 München
Germany
Tel. +49-89-149 01-0
Fax +49-89-149 01-240
www.beissbarth.com
[email protected]

Tyre changer

MS 630-24 and MS 650

Best in class for tyre specialists

• 24” and 28” external clamping
• G-Frame rigidity
• Revolutionary bead breaker system Ergo Control
• Side Lift NG

MS 630-24 and MS 650
Advanced technology for high
wheel service volume workshops

MS 630-24 and 650 are pneumatic tilting back pole passenger car tyre changers that allow to work with car, light
commercial vehicle and motorcycle tyres (with special accessories).

The 630-24 model is equipped with 24” turntable (external clamping), while 650 is equipped with 28’’ turntable.
Both have been designed for high wheel service volume workshops and tyre specialists.

The extreme rigidity of the structure and the reduction of flexion of the operating arm, characterized by the use of
the G-frame concept, make them a market benchmark for robustness and solidity even with UHP and RFT tyres.

Both models can be provided with standard bead breaker Ergo Control function. Motor Inverter drive system
guarantees the best combination of power and speed needed for an effective service.

The MS 650 is supplied as standard with a pneumatic positioning of the mounting tool and the Tecnoroller NG that
makes easier and faster the work with UHP and RFT tyres.

Both tyre changers can be equipped with the Side Lift NG which allows you to work always in an ergonomic position.

Models:
• With and without tyre inflation assistance system through jaws (IT)
• With and without Ergo Control (patent pending)
• With and without tyre leverless system (TLL)
• With and without Tecnoroller NG (only 630-24 model)
• Two drive motors available (1 Ph/3 Ph)

Models Motor 1* Motor 2** Tecnoroller Inflation Ergo TLL
NG Technology Control
•
IT • •
•
MS 630-24 • • • •
• •
MS 630-24 IT • • • •
•
MS 630-24 V1 • • •
•
MS 630-24 IT V1 • • • • •
•
MS 630-24 V5 • • •

MS 630-24 IT V5 • • •

MS 630-24 V6 • • •

MS 630-24 IT V6 • • • •

MS 630-24 V8 • • •

MS 630-24 IT V8 • • • •

MS 650 V1 • • •

MS 650 IT V1 • • • •

MS 650 V6 • • •

** Standard motor 3 phase MS 650 IT V6 • • • •

** Single phase motor MS 650 V8 • • •
equipped with inverter
MS 650 IT V8 • • • •
2

Tyre changer

Ergo Control (patent pending)

Revolutionary bead breaker system
Ergo Control is a hand bead breaker system that allows
you to execute the operation of tyre-beading always in an
ergonomic working position, reducing the time with less
effort while always being in a safe position.
Ergonomic working position: you stand in front of the
wheel, not in front of the pedals.
Increase of safety: the use of the bead breaker lever
(patented) guards the operator`s arm.
Protection of wheel/rim and TPMS: the control by using
the lever gives the operator a maximum of sensitivity.
Intuitive, easy to use: the movement of the blade can be
driven by only a finger

Tecnoroller NG

TECNOROLLER NG is a pneumatic device to assist during mounting and demounting operations of any type
of passenger car and light commercial vehicle tyre. It is especially recommended to mount and demount
UHP and RFT tyres. It is designed to offer a great user experience, control switches are accessible from any
working position and the high positioning of the follower arm facilitates all operations on the tyre bead.

3

Inflation Technology Tyre Leverless System
(”IT”) (”TLL”)

• Tyre inflation and blast of air are controlled by pedal • M ovement of the TLL Leveless system allows to perfectly
• Tyre inflation assistance system through the jaws, which follow the rim profile making easier the access of the tool
and allowing perfect bead extraction.
thanks to the new design, guarantees higher air jet power

G-Frame Side Lift NG

G-Frame for stability, safe and innovative, Side Lift NG – Simple and easy to use
functional design All new tyre changer platforms can be upgraded with the
The mounting head always remains at a safe distance from Side Lift NG which allows the operator to always work in an
ergonomic position. The Side Lift NG is mounted on the right
the rim to prevent damage on tyre changing. side of the machine next to the bead breaker which allows
• G-Frame design standard for improved productivity. The Lift is also equipped with an
• Mounting head with automatic clearance function integrated roller board which leads to an easier and faster
bead breaking operation.
• Mounting arm with rigid hexagonal profile
• M ounting column with extra-wide diameter

(140 x 140 mm) and pneumatic locking system

4

Advantages Tyre changer

Convenient tyre changing 5
• Self-centring four-jaw chuck
• S ave time, no need to remove plastic jaws

protection for steel rims inside clamping thanks to
their new design
• 1 00 mm diameter of mounting column cylinder
guarantees column and mounting head stability
• O ptimised storage/holder for bead lever
• U niversal, flexible adjustment of the lubricant ring
shaped holder, one fits for all

Reduced effort for the operator – increased
safety and speed!
• Be flexible and optimize your job. Save time thanks

to 40 % faster bead breaking cylinder
• C ushioned cylinder for rapid but smooth

movement, of the vertical tilting back pole, at the
end of the stroke
• Time saving tyre inflation, 25 % faster than other
comparable brands. Now easier to reach double-
scale pressure gauge (bar/psi) on the side of
the pole
• Fast clamping thanks to the new self centring table
top with more roboust desing and inch scale laser
printed
• Bright yellow warning and knee protection safety
signs at turntable cylinders (“yellow fin”)
• By a simple movement it is possible to reach the
max. turntable working range
• Special treatment to protect the turntable from
dust and rust. Clean has never been so easy!
(patent pending)

Product at a glance User-friendly
Control switches
Outstanding are placed to be
stability with accessible from any
G-Frame working area

Without any efforts Tecnoroller NG
Pneumatic positioning
and locking of the Extreme precision
mounting head The horizontal arm
and the follower arm,
Fast clamping allow a precise and
thanks to the new smooth control in the
self centring table whole process
top with more
robust design Intuitive, easy to
use: the movement
of the blade can be
driven by only a finger

Speedy NEW revolutionary
The two-speed Ergo Control* (patent
turntable is easily pending): bead breaking
operated using a pedal with your fingertips –
full control and comfort.

MS 630-24 MS 650
• Suitable for wheels up to 1200 mm • Suitable for wheels up to 1200 mm
• Up to 24” outside rim clamping • Up to 28” outside rim clamping
• Up to 12,5” rim width • Up to 15” rim width

* Available only for specific models
6

Tyre changer

Technical data

Range of application MS 630-24 MS650

Max wheel diameter up to 1200 mm up to 1200 mm

Outside rim clamping 10” – 24” 12” – 28”

Inside rim clamping 12” – 28” 13” – 32”

Rim width 3” – 12,5” 3” – 15”
4” – 15” (V8) 4” – 15” (V8)

Bead breaker range 70 – 397 mm 70 – 397 mm

Air connection 8 – 10 bar 8 – 10 bar

Dimensions (W x H x D) 1380 x 2110 x 1840 mm 1450 x 2350 x 2010 mm
1450 x 2295 x 2010 mm (V8) 1450 x 2295 x 2060 mm (V8)

Net weight 317 kg; 385 kg (V8) 360 kg; 385 kg (V8)

Bead Breaking force 11500 N 11500 N

MOTOR VERSION 1

Main connections 3 Ph – 400 V 50 Hz 3 Ph – 400 V 50 Hz

Absorption 8 – 10,5 A 8 – 10,5 A

Speed of rotation (two-speed) 7/15 rpm (two-speed) 7/15 rpm

MOTOR VERSION 2 with frequency converter

Main connections 1 Ph – 230 V (50 – 60 Hz) 1 Ph – 230 V (50 – 60 Hz)

Absorption 23 – 24 A 23 – 24 A

Speed of rotation (torque control) 7/15 rpm (torque control) 7/15 rpm

SCOPE OF DELIVERY

Tyre inflater (pedal-controlled) • •

Jaws plastic protection ••

5 demounting head tongue protections • •

Plastic protection for bead breaker • •

Wing side protection for demounting head • •

Lubricant brush and bead lever • •

Roller board Optional Optional

Ergo Control • (V5, V6, V8) • (V6, V8)

Tecnoroller NG • (V1, V6, V8) •

TECNOROLLER NG

Max press force 5500 N (horizontal arm) 2500 N (follower arm)

Applications / Wheel sizes Two speed rotation turntable
• All rims • 3 Ph – 400 V (50 Hz): two-speed, forward / reverse
• All types of passenger cars and light trucks • 1 Ph – 230 V (50 – 60 Hz): MOTOINVERTER DRIVE
• Motorcycle wheels (with special accessory kit)
• No need for re-positioning of clamping jaws or SYSTEM the needed torque at your speed

mounting column

7

Accessories

PN: 1695 108 055 PN: 1695 102 148 PN: 1695 101 608 PN: 1695 102 725

Pressing point Jaws plastic protection kit Demounting head tongue Mounting tool cover
PN: 1695 106 152 PN: 1695 105 191 protection PN: 1695 101 518

PN: 1695 101 575

Plastic protection for bead breaker Plastic rim protection Motorbike/scooter adaptors Bead breaking bearing motorbike
suitable PN: 1695 103 057 PN: 1695 106 190 wheel

PN: 1695 103 210 PN: 1695 101 372

Motorbike mounting head kit Kit WDK for run flat and Roller board External IT kit
PN: 1695 903 403 ultra high performances tyres PN: 1695 102 584 PN: 1695 103 261

PN: 1695 105 190

Tecnoroller NG Mounting lever (WdK-Model) Storage kit Bead pressing device (thin)
PN: 1695 103 216 PN: 1695 107 466

Bead pressing device (thick) Side Lift NG

Beissbarth GmbH 05.2016 - 1 693 604 029
A Bosch Group company
Hanauer Straße 101
80993 München
Germany

Tel. +49-89-149 01-0
Fax +49-89-149 01-240

www.beissbarth.com
[email protected]

Tyre changer

MS 670

Best in class for tyre specialists

• 30’’ center post tyre changer
• G-Frame rigidity
• Simple and reliable
• Side Lift NG
• Tyre leverless system
• Ergo Control
• Helper Device

Product at a glance Helper arm
• Separate movements
Tyre leverless
system (TLL) of tools
• Without any efforts • Precise control
• Easy access of the tool • Press and/or release
• Perfect bead extraction
where needed
Side storage
• Storage for tools, Double rollers
function
valves ... • Possibility to work

Inflating tubeless with all wheel size
• Faster bead seating • Faster positioning
• Memory ring to save
of the tire on the rim
time and to have
Central clamping the arm always in
• Maximum wheel position

protection Bead breaker:
• Faster and easier Ergo control (patent
pending)
locking process with • Fast & Easy To Use
less efforts • Safety
• Ergonomic
Turning pedal • Full Control
• Wheel rotation • Protection for

control tire/rim
• Proportional control
Side Lift NG
of turntable speed/ • Ergonomic
force • Time saving being

Scope of delivery in right position
• Machine offered • Lifting capacity

with a full complete up to 80 kg
scope of delivery • Integrated roller

board

MS 670
Center post tyre changer

The MS 670 is a 30“ tyre changer for high volume workshops and offers all features and user benefits with maximum
comfort to perform the perfect and effortless tyre changing. Equipped with center post clamping system for a faster and
easier locking system can handle large wheel sizes max 15” and wheel diameter up to 1,200 mm without using any
kind of spacers thanks to the new helper device equipped with double horizontal arms.

The G-Frame structure of the MS 670 provides a stable and functional design increasing the rigidity of the tyre changer
and the Ergo Control hand bead breaking system with the Side Lift NG allows the user to work always in ergonomic
position and safety condition. The integrated inverter solution offers a proportional electronic control of the turntable
speed. Additionally the TLL leverless system offers the perfect bead extraction which leads to a faster and easier
demounting process.

G-Frame

G-Frame for stability, safe and innovative,
functional design
The mounting head always remains at a safe distance
from the rim to prevent damage on tyre changing.
• G-Frame design standard
• Increase the rigidity of the machine shortening the

flow of the forces inside the machine
• Make the machine as much rigid as possible
• Mounting column with extra-wide diameter

(140 x 140 mm) and pneumatic locking system

Center post

Center post clamping system:
• T o prevent possible rim/tire damages too
• Faster and Easier locking process with
less efforts
• Smart arm locking system

Ergo Control
(patent pending)

Revolutionary bead breaker system
Ergo Control is a hand bead breaker system that allows
you to execute the operation of tyre-beading always in
an ergonomic working position, reducing the time with
less effort while always being in a safe position.
Ergonomic working position: you stand in front of
the wheel, not in front of the pedals.
Increase of safety: the use of the bead breaker lever
(patented) guards the operator`s arm.
Protection of wheel/rim and TPMS: the control by
using the lever gives the operator a maximum of sensitivity.
Intuitive, easy to use: the movement of the blade can
be driven by only a finger

Helper device

S eparate movements of tools
• P recise control
• P ress and/or release where needed
Follower arm as standard
Control switches easily & ergonomically accessible
Double horizontal arm:
• P ossibility to work with all wheel size
• F aster positioning, no necessity of spacers
• P ush & lift the second bead
• M emory ring to save time and to have the arm

always in position

Side Lift NG

Side Lift NG – Simple and easy to use
All new tyre changer platforms can be upgraded with the
Side Lift NG which allows the operator to always work in
an ergonomic position. The Side Lift NG is mounted on the
right side of the machine next to the bead breaker which
allows for improved productivity. The Lift is also equipped
with an integrated roller board which leads to an easier and
faster bead breaking operation.

Tyre changer

Tyre Leverless
System (”TLL”)

Movement of the TLL Leveless system allows to perfectly
follow the rim profile making easier the access of the tool
and allowing perfect bead extraction (WDK approved).

Technical data

Models Side storage Inflating Technology (IT) Scope of delivery
MS 670 IT • • • 1x MS 670
MS 670 • • Helper device with double Horizontal arm
• Ergo Control
MS 670 – Technical data MS 670 • Side Lift NG
Range of application 1 Ph – 230 V 50 Hz • Boost inflating system (MS 670 IT)
Main connections 13” – 30” • 1x TLL protection kit
Rim Diameter Up to 15” • 1x Wing side protection kit for TLL
Rim width 1,200 mm • 1x Bead breaker plastic protection
Max. wheel diameter 8 – 10 bar • 1x Bead pressing device
Air connection 2 speed • 2 x Center locking protection
N. turntable speed 7 – 15 rpm • 2 x Cone protection tool locking system
Speed of rotation 75 – 401 mm / Ergo Control • 2 x Pin protection locking system
Bead breaker range 11,000 N • 1 x Cone Ø 70 mm
Bead breaking force • 2 x Memory ring for horizontal arms
• 1x Lubricant brush

Accessories

1 695 107 440 1 695 107 442 1 695 108 136 1 695 107 441

Cone Ø 75 – 120 mm for steel rims Light truck cone Ø 190 – 223 mm Light truck cone Ø 110 – 190 mm Cone Ø 75 – 120 mm for steel rims
1 695 000 289 + spacer + spacer 1 695 108 140

1 695 108 138 1 695 108 139

Cone Ø 70 mm Cone Lamborghini Cone Porsche Cone BMW
1 695 102 584 1 695 101 372 1 695 107 439 1 695 103 302

Storage kit External IT kit Wheel clamping adaptor kit for Bead locking plier
1 695 107 444 reverse mounted wheels

Centre locking protection

Beissbarth GmbH 07.2016 - 1 693 604 026
A Bosch Group company
Hanauer Straße 101
80993 München
Germany

Tel. +49-89-149 01-0
Fax +49-89-149 01-240

www.beissbarth.com
[email protected]

Tyre changer

MS 900
Effortless & simple tire changing

• 30” automatic LEVERLESS tire changer
• Easy and precise locking system
• 2 laser pointers
• Unique tooling system
• Inverter solution
• Completely elctromechanic
• Intuitive control panel
• Side lift

MS 900
Automatic Leverless Tire Changer

The new MS 900 is a 30“ automatic leverless tire changer which guarantees a fast and effortless tire changing.
Intuitive with high level of technology, this equipment makes the job simple as you’ve never experienced.
The machine recognizes the dimension of the wheel by placing two laser pointers.
Completely electromechanic, all movements are driven by motor inverters to guarantee precision and
reliability.

WDK approved*
Certified for RunFlat

and UHP-tyres

2

Easy and effortless Tyre changer

Center post clamping system Lock
• Easy and precise locking system
• Completely mechanical and easy maintainability
• Faster than any other automatic locking system
• Color code to identify the locking stage

Insert Press

Wheel set up through two laser pointers Bead Breaker Disks
• Intuitive color code system • Double arm bead breaker system
• 2 independent set up buttons: • The strongest. Market benchmark
• Inverter technology
• Green one to set wheel diameter • Hump shape pre-set
• Red one to set the wheel width • Folding structure to save the wheel

3

User oriented design

Side lift
• Lifting capacity up to 80 kg
• Allows to work always in an ergonomic position

without stressing the back
• Improves productivity

Control panel
Maximum user comfort in a single workstation
which includes:
Inflating control box
• P ressure gauge
• Air supply and oiler
• Inflating hose
Control console
Joysticks, buttons and switches in an intuitive
layout that follows the tire changing procedure
Pedals
• To control the rotation (motorinverter) and the

inflating process

4

Tyre changer

Performance details

Tooling system
Keep your tire and wheel safe.

Leverless tire-bead extraction tool Drive-in lower tire-bead tool Assembly upper tire-bead tool

Bead pressing arm
• It supports the tire mounting
• It moves automatically in sleep mode

Led bar & mirror:
• For a better view on the operation of the lower bead

5

Technical data

Technical specification MS 900 Scope of delivery
Power supply 230 V 1ph 50 – 60 Hz
Air supply pressure 8 – 10 Bar • 1 x MS 900
Rim diameter clamping 12” – 30” • 2 x Centre locking protection
Max. Wheel diameter 1,200 mm (47”) • 2 x Cones protection
Wheel width up to 16” • 2 x locking system pin protection
N. turntable speed 2 speed • 1 x Cone Ø70 mm
Rotation speed 7 – 16 rpm • 1 x Bead locking plier
Bead breaking force 14,406 N • 3 x Rim protection kit
Bead breaking range • 3 x Mounting tools protection
Lift capacity 670 mm (26‘‘) • 1 x Flange reduction
Unit weight 80 Kg • 1 x Weight scraper
Unit dimensions (WxDxH) 600 Kg • 1 x Brush
1.880 x 1.850 x 1.750 mm • 1 x Grease pot holder

6

Tyre changer

Accessory PN: 1 695 107 439 PN: 1 695 107 440 PN: 1 695 107 441

PN: 1 695 108 137

Blast inflating system Wheel clamping adaptor kit for Light truck cone Ø 75 – 145 mm Cone Ø 75 – 120 mm for steel rims
PN: 1 695 107 442 reverse mounted wheels PN: 1 695 107 444 PN: 1 695 000 289

PN: 1 695 103 302

Light truck cone Ø 190 – 223 mm Bead locking plier Centre locking protection Cone Ø 70 mm
+ spacer PN: 1 695 108 138 PN: 1 695 108 139 PN: 1 695 108 140

PN: 1 695 108 136

Light truck cone Ø 110 – 190 mm Cone Lamborghini Cone Porsche Cone BMW
+ spacer

PN: 1 695 108 196 PN: 1 695 108 195

Wheel clamping adaptor kit for Light truck kit: cones Ø120-190
clad wheels mm /Ø190-223 mm + spacer

7