P3N Series

Pneumatic Prep-Air ® II
“Hi-Flow” P3N Series

Air Preparation Units
Filter, Regulator, Lubricator,
and Accessories

Catalog 0709/USA

! WARNING

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED
HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.

This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide
product and/or system options for further investigation by users having technical expertise. It is important that you analyze
all aspects of your application including consequences of any failure, and review the information concerning the product or
system in the current product catalog. Due to the variety of operating conditions and applications for these products or
systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products
and systems and assuring that all performance, safety and warning requirements of the application are met.

The products described herein, including without limitation, product features, specifications, designs, availability and pricing,
are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.

Offer of Sale

The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its
authorized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this
document entitled “Offer of Sale”.

© Copyright 2000, Parker Hannifin Corporation. All Rights Reserved

Pneumatic Parker Hannifin Corporation
Pneumatic Division North America
Richland, Michigan

Catalog 0709/USA “Hi-Flow” Series, Prep-Air® II
Air Preparation Units
Table of Contents

“Hi-Flow” Series Basic Features ............................................................................ 2-3
Filters ..................................................................................................................... 4-5
Coalescing Filters .................................................................................................. 6-7
Regulators .............................................................................................................. 8-9
Air Pilot Regulator .............................................................................................. 10-11
Piggybacks ......................................................................................................... 12-13
Mist Lubricators ................................................................................................. 14-15
Modular Combinations ....................................................................................... 16-17
Exploded View / Accessories ............................................................................. 18-19
Offer of Sale ............................................................................................................. 20

1 Parker Hannifin Corporation
Pneumatic Division North America
Pneumatic Richland, Michigan

Catalog 0709/USA “Hi-Flow” Series, Prep-Air® II
Air Preparation Units
Basic Features
Advantages Benefits
Features
Extends the warranty to 3 years Security in knowing Parker
Extended 3 Year on Parker pneumatic components products are backed with the
Warranty downstream of a Parker filter. best warranty in the industry.

Non-Rising Standard tamper resistant Equipment settings can be
Removable Knob feature. maintained, reducing the risk
of tampering.

Modular Design With port blocks, units can be Saves maintenance time and
removed from installation without money during service and/or
disturbing the plumbing. retrofit.

No Body Connectors Units bolt together without Saves space for machine
adding space between design. Saves the cost of
components. body connectors.

Modular Port Blocks One size FRL body can be Allows a smaller quantity of
installed into a variety of components to be stocked.
port sizes. Design flexibility.

Multiple Port Types NPT and BSP porting available Worldwide availability of
for flexible machine design. units and service parts.

Global Product Same product and part Allows for high service
number worldwide. levels for customers
around the world.

“One Touch” Bowl User friendly bowl retention Simple, fast bowl removal for
method with locking latch. time savings. Latch provides
safe, secure bowl attachment.

High Efficiency Depth 40 & 5 micron elements available Assures maximum protection,
Filtration for the most demanding extending the life of equipment.
applications. Easy to detect dirty element.

Multiple Drain Options Manual or automatic drains Flexibility for custom
available for different uses. applications.

2 Parker Hannifin Corporation
Pneumatic Division North America
Pneumatic
Richland, Michigan

Catalog 0709/USA “Hi-Flow” Series, Prep-Air® II
Air Preparation Units
Basic Features
Advantages Benefits
Features
Low pressure drop, increased Efficient filtration with high flow
Large Filter Element element life. for excellent performance
Surface and cost savings.

Excellent Water Provides pneumatic systems Promotes maximum
Removal Efficiency with clean, dry air for performance, extending
trouble free service. the life of downstream
components.

Pressure Differential Give a visual indication of Tells when to service the
Indicators a 10 PSI pressure drop element, promoting maximum
across a filter or coalescer. performance.

Two Grades of Allows for various stages of Assures clean, dry
Coalescing Elements particulate and oil removal, compressed air for critical
giving 99.97% efficiency. pneumatic applications.
Solid Regulator
Control Piston Durability. Extends the service life of
the regulator.

Pilot Operated Allow the regulator to be adjusted Flexibility in operation and
Regulator from remote locations where machine design
space may be limited.

Piggyback Design Combines the features of both Provides a cost savings,
Filter/Regulator a filter and a regulator into space savings, and reduces
one component. potential leak points.

Proportional Oil delivery is proportional over Gives the user dependable oil
Oil Delivery a wide range of air flows for delivery for all applications.
all applications.

3 Parker Hannifin Corporation
Pneumatic Division North America
Pneumatic Richland, Michigan

Catalog 0709/USA “Hi-Flow” Series, Filters
3/4", 1", 1-1/2" – Basic 1" Body
Features & Operation

Filters

Manual Automatic Features A (PB)
Drain Drain A
• Port blocks (PB) available to provide
1-1/2" port extension to 1" ported bodies. B

• Excellent water removal efficiency. C

• Metal bowl with sight gauge. E
D
• Large filter element surface guarantees
low pressure drop and increased
element life.

• Manual drain as standard, optional
auto drain.

• High Flow 300 SCFM. §

Distance Required
F To Remove All

Bowls Regardless
of Drain Option

Port NPT BSPP Filter Dimensions
Size
Manual Drain Auto Drain Manual Drain Auto Drain A A (PB) B C
3/4"
P3NFA96GSM P3NFA96GSA P3NFA16GSM P3NFA16GSA 3.62 5.59 3.62 1.38

92mm 142mm 92mm 35mm

1" P3NFA98GSM P3NFA98GSA P3NFA18GSM P3NFA18GSA DEF
1-1/2" # P3NFA9PGSM P3NFA9PGSA P3NFA1PGSM P3NFA1PGSA 9.57 10.95 4.92
243mm 278mm 125mm

# 1" Port Body with 1-1/2" Port Block.
† For other models, refer to matrix.
§ SCFM = Standard cubic feet per minute at 90 PSIG inlet and 5 PSIG pressure drop, with 40 micron element.

Operation

ÀÀÀ First Stage Filtration:
À
Air enters at inlet port and flows through deflector plate (A) which
A ÀÀ causes a swirling action. Liquids and coarse particles are forced to
B ÀÀ the bowl interior wall (B) by the centrifugal action of the swirling
air. They then carry down the bowl wall by the force of gravity. Air
D passes directly through the filter element (D) until the large
particles and liquids are removed. The baffle (E) separates the
E lower portion of the bowl into a “quiet zone” where the removed
liquid and particles collect, unaffected by the swirling air, and are
Bowl shown therefore not reentrained into the flowing air.

F rotated 90° for Second Stage Filtration:
illustration
purposes After liquids and large particles are removed in the first stage of
filtration, the air flows through element (D) where smaller particles
are filtered out and retained. The filtered air then passes
downstream. Collected liquids and particles in the “quiet zone”
should be drained before their level reaches a height where they
would be reentrained in the flowing air. This can be accomplished
by the manual drain (F) which is actuated by twisting.

4 Parker Hannifin Corporation
Pneumatic Division North America
Pneumatic
Richland, Michigan

Catalog 0709/USA “Hi-Flow” Series, Filters
3/4", 1", 1-1/2" – Basic 1" Body
Technical Specifications

Ordering P3N F A 9 8 G S M
Information

Design Port Type Port Size Element Bowl Drain
Level
1. G Thread 6. 3/4" (w/o w/o DPI Indicator S. Metal Bowl w/ M. Manual Twist
(BSP) Female Port Blocks) A. Adsorber Sight Gauge Drain
E. 5 Micron
2. Rc Thread 8. 1" (w/o G. 40 Micron A. Automatic
(BSPT) Female Port Blocks) w/ DPI Indicator Drain
B. Adsorber
9. NPT Female P. 1-1/2" Port F. 5 Micron P. Push ‘N’ Drain
Blocks (w/ 1" H. 40 Micron
Ported Body)

NOTE: Shaded items are standard.

Technical Information

Primary Pressure - bar Primary Pressure - bar

2.4 bar 6.2 bar 10.3 bar 2.4 bar 6.2 bar 10.3 bar

Primary Pressure - PSIG Primary Pressure - PSIG

10 35 PSIG 90 PSIG 150 PSIG 10 35 PSIG 90 PSIG 150 PSIG
9
9 Pressure Drop (bar)
.6 Pressure Drop (PSID).6
8
8
.5 7 .5 7
Pressure Drop (bar)
Pressure Drop (PSID).4 6 .4 6
5
5
.3 .3
4
4
.2 3
.2 3 Flow Characteristics Flow Characteristics
P3NF 3/4 Inch Ports 2 P3NF 1 Inch Ports
2 .1
.1 100 200 300 400 500 600
1
1 Flow (SCFM)
00
00 0 50 100 150 200 250
0 50 100 150 200 250 300 350 400 450 500
0 Flow - dm3/s
Flow (SCFM)
n
0 25 50 75 100 125 150 175 200 225

Flow - dm3/s

n

Primary Pressure - bar

2.4 bar 6.2 bar 10.3 bar

Primary Pressure - PSIG

10 35 PSIG 90 PSIG 150 PSIG
9
Pressure Drop (bar) Flow Characteristics Specifications
Pressure Drop (PSID).6 P3NF 1-1/2 Inch Ports
8 Body ................................................................................. Aluminum
100 200 300 400 500 600 Bowl Capacity ............................................................ 18.0 Ounces
.5 7 Sump Capacity ............................................................ 6.8 Ounces
Flow (SCFM) Deflector ............................................................................... Plastic
.4 6 Drain ...................................................................................... Plastic
5 50 100 150 200 250 Filter Elements–

.3 Flow - dm3/s Standard: 40 Micron ......................................................... Plastic
4 Optional: 5 Micron ........................................................... Plastic
n Pressure & Temperature Rating ........ 0 to 250 PSIG (0 to 17 bar)
.2 3
32°F to 175°F (0°C to 80°C)
2 Seals ....................................................................................... Nitrile
.1 Sight Gauge ...................................................... Polyamide (Nylon)
Weight –
1
3/4" ......................................................................... 3.5 lb. (1.6 kg)
00 1" ............................................................................. 3.5 lb. (1.6 kg)
0 1-1/2" # .................................................................... 4.6 lb. (2.1 kg)

0 # 1" Port Body with 1-1/2" Port Block.

Filter Kits

Drain Kit –
Automatic Drain ................................................................ PS506P
Twist Drain ........................................................................ PS512P

Filter Elements –
40 Micron ............................................................... P3NKA00ESG
5 Micron .................................................................. P3NKA00ESE
Adsorber ................................................................. P3NKA00ESA

Sight Gauge Kit .......................................................... P3NKA00PE
DPI Kit ................................................................................. PS781P
Mounting Bracket Kit .............................................. P3NKA00MW

5 Parker Hannifin Corporation
Pneumatic Division North America
Pneumatic Richland, Michigan

Catalog 0709/USA “Hi-Flow” Series, Coalescing Filters
3/4", 1", 1-1/2" – Basic 1" Body
Features & Operation

Coalescing Filters

Features A (PB)
A
• Port blocks (PB) available to provide
1-1/2" port extension to 1" ported bodies. B

• Metal bowl with sight gauge. C

• Large filter element surface guarantees E
low pressure drop and increased D
element life.

• Manual drain as standard, optional
auto drain.

• High Flow 140 SCFM § – Grade 6 Element
220 SCFM § – Grade 10 Element

Distance Required
F To Remove All

Bowls Regardless
of Drain Option

Port NPT ‡ BSPP ‡ Coalescing Filter Dimensions
Size
Manual Drain Auto Drain Manual Drain Auto Drain A A (PB) B C
3/4"
P3NFA96CSM P3NFA96CSA P3NFA16CSM P3NFA16CSA 3.62 5.59 3.62 2.30

92mm 142mm 92mm 58.5mm

1" P3NFA98CSM P3NFA98CSA P3NFA18CSM P3NFA18CSA DEF
9.57 11.90 4.92
1-1/2" # P3NFA9PCSM P3NFA9PCSA P3NFA1PCSM P3NFA1PCSA 243mm 302mm 125mm

‡ Part numbers are with Grade 6 Elements; for Grade 10 Elements, replace “C” with “9” in the 8th position.
# 1" Port Body with 1-1/2" Port Block.
† For other models, refer to matrix.
§ SCFM = Standard cubic feet per minute at 90 PSIG inlet and 5 PSIG pressure drop.

Operation

À À À The contaminated air enters the element interior and is forced
through a thick membrane of borosilicate glass fibers coated with
A ÀÀ epoxy (A). Flow then passes through an outer structural support
À and, at this stage, has removed up to 99.97% + of the sub-micron
B À particles evident in the contaminated air. These tiny droplets
C À Bowl shown coalesce together and are blotted from the filter surface by the
rotated 90° for drain and release layers of non-woven glass felt and rayon cloth.
D illustration The drops now begin a gravitational passage to the filter sump (B)
purposes where they can be manually or automatically drained.

The clean, filtered air now passes through the outer screen plastic
net and out into the pneumatic system. The Air Line Coalescing
Filter removes liquid aerosols and sub-micron particulate matter.

Collected liquids and particles in the “quiet zone” should be
drained before their level reaches a height where they would be
reentrained in the flowing air. This can be accomplished by the
manual drain (C) which is actuated by twisting knob (D)
counterclockwise.

6 Parker Hannifin Corporation
Pneumatic Division North America
Pneumatic
Richland, Michigan

Catalog 0709/USA “Hi-Flow” Series, Coalescing Filters
3/4", 1", 1-1/2" – Basic 1" Body
Technical Specifications

Ordering P3N F A 9 8 D S M
Information

Design Port Type Port Size Element Bowl Drain
Level
1. G Thread 6. 3/4" (w/o w/o DPI Indicator S. Metal Bowl w/ M. Manual Twist
(BSP) Female Port Blocks) C. Grade 6 Sight Gauge Drain
9. Grade 10
2. Rc Thread 8. 1" (w/o w/ DPI Indicator A. Automatic
(BSPT) Female Port Blocks) D. Grade 6 Drain
Q. Grade 10
9. NPT Female P. 1-1/2" Port P. Push ‘N’ Drain
Blocks (w/ 1"
Ported Body)

NOTE: Shaded items are standard.

Technical Information

Grade 6 Grade 6 Grade 6

Primary Pressure - bar Primary Pressure - bar Primary Pressure - bar

2.4 bar 6.2 bar 10.3 bar 2.4 bar 6.2 bar 10.3 bar 2.4 bar 6.2 bar 10.3 bar

Primary Pressure - PSIG Primary Pressure - PSIG Primary Pressure - PSIG

10 35 PSIG 90 PSIG 150 PSIG 10 35 PSIG 90 PSIG 150 PSIG 10 35 PSIG 90 PSIG 150 PSIG
9 9 9
Pressure Drop (bar) Flow Characteristics Pressure Drop (bar) Flow Characteristics Pressure Drop (bar) Flow Characteristics
Pressure Drop (PSID).6 P3NF 3/4 Inch Ports Pressure Drop (PSID).6 P3NF 1 Inch Ports Pressure Drop (PSID).6 P3NF 1-1/2 Inch Ports
8 8 8
50 100 150 200 250 300 50 100 150 200 250 300 50 100 150 200 250 300
.5 7 .5 7 .5 7
Flow (SCFM) Flow (SCFM) Flow (SCFM)
.4 6 .4 6 .4 6
5 25 50 75 100 125 5 25 50 75 100 125 5 25 50 75 100 125

.3 Flow - dm3/s .3 Flow - dm3/s .3 Flow - dm3/s
4 n 4 n 4 n

.2 3 .2 3 .2 3

2 2 2
.1 .1 .1

1 1 1

00 00 00
0 0 0

0 0 0

Grade 10 Grade 10 Grade 10

Primary Pressure - bar Primary Pressure - bar Primary Pressure - bar

2.4 bar 6.2 bar 10.3 bar 2.4 bar 6.2 bar 10.3 bar 2.4 bar 6.2 bar 10.3 bar

Primary Pressure - PSIG Primary Pressure - PSIG Primary Pressure - PSIG

10 35 PSIG 90 PSIG 150 PSIG 10 35 PSIG 90 PSIG 150 PSIG 10 35 PSIG 90 PSIG 150 PSIG

9 9 9
.6 .6 .6

8 8 8
.5 7 .5 7 .5 7
Pressure Drop (bar) Pressure Drop (bar) Pressure Drop (bar)
Pressure Drop (PSID).4 6 Pressure Drop (PSID).4 6 Pressure Drop (PSID).4 6

5 5 5
.3 .3 .3

4 4 4

.2 3 Flow Characteristics .2 3 Flow Characteristics .2 3 Flow Characteristics
P3NF 3/4 Inch Ports P3NF 1 Inch Ports P3NF 1-1/2 Inch Ports
2 2 2
.1 .1 .1

1 1 1

00 00 00
0 50 100 150 200 250 300 350 400 0 50 100 150 200 250 300 350 400 0 50 100 150 200 250 300 350 400

Flow (SCFM) Flow (SCFM) Flow (SCFM)

0 25 50 75 100 125 150 175 0 25 50 75 100 125 150 175 0 25 50 75 100 125 150 175

Flow - dm3/s Flow - dm3/s Flow - dm3/s
n n n

Coalescing Filter Kits Specifications

Drain Kit – Body & Bowl ................................................................... Aluminum
Automatic Drain ................................................................ PS506P Bowl Capacity ............................................................ 18.0 Ounces
Twist Drain ........................................................................ PS512P Sump Capacity ............................................................ 6.8 Ounces
Deflector ............................................................................... Plastic
Filter Elements – Drain ...................................................................................... Plastic
Grade 6 .................................................................. P3NKA00ESC Coalescing Elements –
Grade 10 ................................................................. P3NKA00ES9
Standard: 0.3 micron, Grade 6 ......................................... Plastic
Sight Gauge Kit .......................................................... P3NKA00PE Optional: 0.7 micron, Grade 10 ....................................... Plastic
DPI Kit ................................................................................. PS781P Pressure & Temperature Rating ........ 0 to 250 PSIG (0 to 17 bar)
Mounting Bracket Kit .............................................. P3NKA00MW
32°F to 175°F (0°C to 80°C)
Seals ....................................................................................... Nitrile
Sight Gauge ...................................................... Polyamide (Nylon)
Weight –

3/4" ......................................................................... 3.5 lb. (1.6 kg)
1" ............................................................................. 3.5 lb. (1.6 kg)
1-1/2" # .................................................................... 4.6 lb. (2.1 kg)
# 1" Port Body with 1-1/2" Port Block.

7 Parker Hannifin Corporation
Pneumatic Division North America
Pneumatic Richland, Michigan

Catalog 0709/USA “Hi-Flow” Series, Regulators
3/4", 1", 1-1/2" – Basic 1" Body
Features & Operation

Regulators

Features A (PB)OCK B
A
• Port blocks (PB) available to provide 1-1/2"
port extension to 1" ported bodies. H TO L

• Self relieving feature plus balanced poppet
provides quick response and accurate
pressure regulation.

• Solid control piston for extended life.

• High Flow 300 SCFM. §
PUS C
E
À
D

Port NPT - 125 PSI, RELIEVING BSPP - 125 PSI, RELIEVING Regulator Dimensions
Size
3/4" with Gauge without Gauge with Gauge without Gauge A A (PB) B
3.62 5.59 3.62
1" P3NRA96BNG P3NRA96BNN P3NRA16BNG P3NRA16BNN 92mm 142mm 92mm

1-1/2" # P3NRA98BNG P3NRA98BNN P3NRA18BNG P3NRA18BNN C D E
6.38 2.08 8.46
P3NRA9PBNG P3NRA9PBNN P3NRA1PBNG P3NRA1PBNN 162mm 53mm 215mm

# 1" Port Body with 1-1/2" Port Block. WARNING
† For other models, refer to matrix section.
§ SCFM = Standard cubic feet per minute at 100 PSIG inlet, Do not connect regulator to bottled gas.
Do not exceed maximum primary pressure rating.
90 PSIG setting and 10 PSIG pressure drop.
Product rupture can cause serious injury.

Operation F With the Knob turned fully counterclockwise (no spring load), and pressure
supplied to the regulator inlet port, the valve poppet assembly (A) is closed.
C D Turning the Knob clockwise applies a load to control spring (C). This load causes
B G the piston (B) and the valve poppet assembly (A) to move downward allowing
flow across the seat area (E) created between the poppet assembly and the
ÀA ÀÀ body. Pressure in the downstream line is sensed below the control piston (B) and
offsets the load of spring (C). As downstream pressure rises, poppet assembly
E (A) and control piston (B) move upward until the area (E) is closed and the load
of the spring (C) and pressure under piston (B) are in balance. A reduced outlet
pressure has now been obtained, depending on spring load. Creating a demand
downstream, such as opening a valve, results in a reduced pressure under the
control piston (B). The load of control spring (C) now causes the poppet
assembly to move downward opening seat area (E) and allowing air to flow to
meet the downstream demand. The flow of downstream air is metered by the
amount of opening (E).

During low flow requirements, the amount of opening at the seat (E) is small,
while at high flows it is large. The downstream pressure signal, which regulates
the amount of opening, requires an adjustment over this range, in order to
attempt a constant output. This adjustment is the orifice (G), which is sized and
located in such a manner as to provide a compensation to the downstream
pressure signal transmitted to the piston. This effect is called aspiration and its
effect is to maintain downstream pressure nearly constant over a wide range of
flow demands.

Should downstream pressure exceed the desired regulated pressure, the excess
pressure will cause the control piston (B) to move upward against control spring
(C), open vent hole (D), and vent the excess pressure to atmosphere through the
hole in the bonnet (F). (This occurs in the standard relieving type regulator only.)

8 Parker Hannifin Corporation
Pneumatic Division North America
Pneumatic
Richland, Michigan

Catalog 0709/USA “Hi-Flow” Series, Regulators
3/4", 1", 1-1/2" – Basic 1" Body
Technical Specifications

Ordering P3N R A 9 8 B N N
Information

Design Port Type Port Size Type Seal Adjustment Pressure Gauge
Level
1. G Thread 6. 3/4" (w/o B. Relieving N. Non-Rising w/o Gauge
(BSP) Female Port Blocks) N. Non-Relieving Knob L. 60 PSI (0 to 4 bar)
N. 125 PSI (0 to 8 bar)
2. Rc Thread 8. 1" (w/o H. 250 PSI (0 to 17 bar)
(BSPT) Female Port Blocks) w/ Gauge
M. 60 PSI (0 to 4 bar)
9. NPT Female P. 1-1/2" Port G. 125 PSI (0 to 8 bar)
Blocks (w/ 1" J. 250 PSI (0 to 17 bar)
NOTE: Ported Body)
Shaded items are standard.

CAUTION: REGULATOR PRESSURE ADJUSTMENT – The working range of knob adjustment is designed to permit
outlet pressures within their full range. Pressure adjustment beyond this range is also possible because
the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting
devices may be obtained only by special design.

Technical Information

Pressure Drop (bar) 120 Flow and Flow Characteristics Pressure Drop (bar) 120 Flow and Flow Characteristics
Pressure Drop (PSID)8 P3NR Pressure Drop (PSID)8 P3NR
7 105 3/4 Inch Ports 7 105
6 90 Primary Pressure 6 90 1 Inch Ports
5 75 100 PSIG (6.9 bar) 5 75 Primary Pressure
4 60 4 60 100 PSIG (6.9 bar)
3 45 0 100 200 300 400 500 600 3 45
2 30 2 30
1 15 Flow (SCFM) 1 15
00
0 50 100 150 200 250 00
-100 -100 0 100 200 300 400 500 600 700
Flow - dm3/s
-50 Flow (SCFM)
n
-50 0 50 100 150 200 250 300

Flow - dm3/s

n

Pressure Drop (bar) 120 Flow and Flow Characteristics
Pressure Drop (PSID)8 P3NR
7 105
6 90 1-1/2 Inch Ports
5 75 Primary Pressure
4 60 100 PSIG (6.9 bar)

3 45

2 30 Specifications

1 15 Adjusting Stem ....................................................................... Steel
Body ................................................................................. Aluminum
00 Bonnet ............................................................................. Aluminum
-100 0 100 200 300 400 500 600 700 Knob ...................................................................................... Plastic
Piston .................................................................................... Plastic
Flow (SCFM) Gauge Ports ............................................................ Two Ports 1/4"
Poppet Assembly .................................................................. Brass
-50 0 50 100 150 200 250 300 Port Threads .......................................................... 3/4", 1", 1-1/2" #
Primary Pressure Rating –
Flow - dm3/s
Maximum Primary Pressure .................. 250 PSIG (17 bar) Max.
n For Secondary Pressure Ranges see above charts.
Seals ....................................................................................... Nitrile
Regulator Kits Springs – Poppet & Control ..................................................... Steel
Temperature Rating ......................... 32°F to 175°F (0°C to 80°C)
Gauges – Weight –
60 PSIG ........................................................................ P781641 3/4" ......................................................................... 4.2 lb. (1.9 kg)
1" ............................................................................. 4.2 lb. (1.9 kg)
160 PSIG ........................................................................ P781642 1-1/2" # .................................................................... 5.3 lb. (2.4 kg)
300 PSIG ........................................................................ P781643
Mounting Bracket Kit .............................................. P3NKA00MW # 1" Port Body with 1-1/2" Port Block.
Springs –
1-60 PSIG Range ......................................................... C10A1304
2-125 PSIG Range ....................................................... C10A1308
5-250 PSIG Range ....................................................... C10A1317
Repair Kit –
Relieving ................................................................... P3NKA00RR
Non-Relieving ........................................................... P3NKA00RN
Control Knob .............................................................. P3NKA00PN

9 Parker Hannifin Corporation
Pneumatic Division North America
Pneumatic Richland, Michigan

Catalog 0709/USA “Hi-Flow” Series, Air Pilot Regulators
3/4", 1", 1-1/2" – Basic 1" Body
Features & Operation

Air Pilot Regulators

Features A (PB)
A
• Port blocks (PB) available to provide 1-1/2"
port extension to 1" ported bodies. B

• Self relieving feature plus balanced poppet C
provides quick response and accurate E
pressure regulation.
D
• Solid control piston for extended life.

• High Flow 300 SCFM. §

Port NPT – RELIEVING BSPP – RELIEVING Air Pilot Reg. Dimensions
Size with Gauge (125 PSI) without Gauge with Gauge (125 PSI) without Gauge
A A (PB) B
3/4" P3NRA96BPG P3NRA96BPP P3NRA16BPG P3NRA16BPP 3.62 5.59 3.62
92mm 142mm 92mm

1" P3NRA98BPG P3NRA98BPP P3NRA18BPG P3NRA18BPP C D E
3.38 2.08 5.46
1-1/2" # P3NRA9PBPG P3NRA9PBPP P3NRA1PBPG P3NRA1PBPP 86mm 53mm 139mm

# 1" Port Body with 1-1/2" Port Block. WARNING
† For other models, refer to matrix section.
§ SCFM = Standard cubic feet per minute at 100 PSIG inlet, Do not connect regulator to bottled gas.
Do not exceed maximum primary pressure rating.
90 PSIG setting and 10 PSIG pressure drop.
Product rupture can cause serious injury.

Operation

A D are in balance. A reduced outlet pressure has now been
C obtained. Creating a demand downstream, such as
opening a valve, results in a reduced pressure under
ÀB À G the control piston (A). The load of control piston (A)
now causes the poppet assembly to move downward
ÀÀ opening seat area (F) and allowing air to flow
downstream. The flow of downstream air is metered
F by the amount of opening (F).

With pressure supplied to the regulator inlet port and During low flow requirements, the amount of opening
no pilot signal, the valve poppet assembly (B) is closed. at the seat (F) is small, while at high flows it is large.
Pressurizing the pilot port applies a load to control The downstream pressure signal, which regulates the
piston (A). This load causes the piston (A) and the amount of opening, requires an adjustment over this
valve poppet assembly (B) to move downward allowing range, in order to attempt a constant output. This
flow across the seat area (F) created between the adjustment is the orifice (G), which is sized and located
poppet assembly and the body. Pressure in the in such a manner as to provide a compensation to the
downstream line is sensed below the control piston (A) downstream pressure signal transmitted to the piston.
and offsets the load of piston (A). As downstream This effect is called aspiration and its effect is to
pressure rises, poppet assembly (B) and control piston maintain downstream pressure nearly constant over a
(A) move upward until the area (F) is closed and the wide range of flow demands.
load of the piston (A) and pressure under piston (A)
Should downstream pressure exceed the desired
regulated pressure, the excess pressure will cause the
control piston (A) to move upward against opening vent
hole (D) and vent the excess pressure to atmosphere
through the hole in the bonnet (C). (This occurs in the
relieving type regulator only.)

10 Parker Hannifin Corporation
Pneumatic Division North America
Pneumatic
Richland, Michigan

Catalog 0709/USA “Hi-Flow” Series, Air Pilot Regulators
3/4", 1", 1-1/2" – Basic 1" Body
Technical Specifications

Ordering P3N R A 9 8 B P P
Information

Design Port Type Port Size Type Seal Adjustment Pressure Gauge
Level B. Relieving
1. G Thread 6. 3/4" (w/o N. Non-Relieving P. Pilot w/o Gauge
(BSP) Female Port Blocks) Operated P. Pilot Operator
w/ Gauge
2. Rc Thread 8. 1" (w/o M. 60 PSI (0 to 4 bar)
(BSPT) Female Port Blocks) G. 125 PSI (0 to 8 bar)
J. 250 PSI (0 to 17 bar)
9. NPT Female P. 1-1/2" Port
Blocks (w/ 1"
Ported Body)

NOTE: Shaded items are standard.

CAUTION:

REGULATOR PRESSURE ADJUSTMENT – The working range of knob adjustment is designed
to permit outlet pressures within their full range. Pressure adjustment beyond this range is also
possible because the knob is not a limiting device. This is a common characteristic of most
industrial regulators, and limiting devices may be obtained only by special design.

Technical Information

Pressure Drop (bar) 120 Flow and Flow Characteristics Pressure Drop (bar) 120 Flow and Flow Characteristics
Pressure Drop (PSID)8 P3NRP Pressure Drop (PSID)8 P3NRP
7 105 3/4 Inch Ports 7 105
6 90 Primary Pressure 6 90 1 Inch Ports
5 75 100 PSIG (6.9 bar) 5 75 Primary Pressure
4 60 4 60 100 PSIG (6.9 bar)
3 45 0 100 200 300 400 500 600 3 45
2 30
1 15 Flow (SCFM) 2 30
00
0 50 100 150 200 250 1 15
-100
Flow - dm3/s 00
-50 -100 0 100 200 300 400 500 600 700
n
Flow (SCFM)

-50 0 50 100 150 200 250 300

Flow - dm3/s

n

Pressure Drop (bar) 120 Flow and Flow Characteristics
Pressure Drop (PSID)8 P3NRP
7 105
6 90 1-1/2 Inch Ports
5 75 Primary Pressure
4 60 100 PSIG (6.9 bar)
3 45
2 30 Specifications
1 15
Adjusting Stem ....................................................................... Steel
00 Body ................................................................................. Aluminum
-100 0 100 200 300 400 500 600 700 Bonnet ............................................................................. Aluminum
Piston .................................................................................... Plastic
Flow (SCFM) Gauge Ports ............................................................ Two Ports 1/4"
Poppet Assembly .................................................................. Brass
-50 0 50 100 150 200 250 300 Port Threads .......................................................... 3/4", 1", 1-1/2" #
Primary Pressure Rating –
Flow - dm3/s
Maximum Primary Pressure .................. 250 PSIG (17 bar) Max.
n For Secondary Pressure Ranges see above charts.
Seals ....................................................................................... Nitrile
Air Pilot Regulator Kits Springs – Poppet ...................................................................... Steel
Temperature Rating ......................... 32°F to 175°F (0°C to 80°C)
Gauges – Weight –
60 PSIG ........................................................................ P781641 3/4" ......................................................................... 3.3 lb. (1.5 kg)
1" ............................................................................. 3.3 lb. (1.5 kg)
160 PSIG ........................................................................ P781642 1-1/2" # .................................................................... 4.4 lb. (2.0 kg)
300 PSIG ........................................................................ P781643
Mounting Bracket Kit .............................................. P3NKA00MW # 1" Port Body with 1-1/2" Port Block.
Repair Kit –
Relieving ................................................................... P3NKA00RR
Non-Relieving ........................................................... P3NKA00RN

11 Parker Hannifin Corporation
Pneumatic Division North America
Pneumatic Richland, Michigan

Catalog 0709/USA “Hi-Flow” Series, Piggybacks
3/4", 1", 1-1/2" – Basic 1" Body
Features & Operation

Piggybacks

®®
® A (PB)
® A
OCK
®®

Features B

• Port blocks (PB) available to provide
1-1/2" port extension to 1" ported bodies.
PUS H TO L

À • Excellent water removal efficiency. C
• Metal bowl with sight gauge.

• Large filter element surface guarantees low E
pressure drop and increased element life. D

• Manual drain as standard, optional auto drain.

• Self relieving feature plus balanced poppet
provides quick response and accurate
pressure regulation.

• Solid control piston for extended life. Distance Required
• High Flow 250 SCFM. § F To Remove All

Bowls Regardless
of Drain Option

Port NPT BSPP Piggyback Dimensions

Size Manual Drain Auto Drain Manual Drain Auto Drain A A (PB) B C
3/4"
P3NEA96GSMBNN P3NEA96GSABNN P3NEA16GSMBNN P3NEA16GSABNN 3.62 5.59 3.62 6.38
92mm 142mm 92mm 162mm

1" P3NEA98GSMBNN P3NEA98GSABNN P3NEA18GSMBNN P3NEA18GSABNN D E F
9.57 15.95 4.92

1-1/2" # P3NEA9PGSMBNN P3NEA9PGSABNN P3NEA1PGSMBNN P3NEA1PGSABNN 243mm 405mm 125mm

# 1" Port Body with 1-1/2" Port Block.
† For other models, refer to matrix.
§ SCFM = Standard cubic feet per minute at 100 PSIG inlet and 10 PSIG pressure drop.

Operation G Turning the knob (A) clockwise applies a load to control spring (F)
A F which forces the piston (H) and valve poppet assembly (C) to
move downward allowing filtered air to flow through the seat area
B À ÀC (I) created between the poppet assembly and the seat. “First
stage filtration” begins when air pressure supplied to the inlet port
À ÀÀ I is directed through deflector plate (D) causing a swirling
ÀÀ J centrifugal action forcing liquids and coarse particles to the inner
D bowl wall (E) and down below the lower baffle to the quiet zone.
E After liquids and large particles are removed in the first stage of
filtration “second stage filtration” occurs as air flows through
Bowl shown element (J) where smaller particles are filtered out and retained.
rotated 90° for The air flow now passes through seat area (I) to the outlet port of
illustration the unit. Pressure in the downstream line is sensed below the
purposes diaphragm (H) and offsets the load of spring (F). When
downstream pressure reaches the set-point, poppet valve
assembly (C) and diaphragm (H) move upward closing seat area
(I). Should downstream pressure exceed the desired regulated
pressure, the excess pressure will cause the diaphragm (H) to
move upward opening vent hole (B) venting the excess pressure
to atmosphere through the hole in the bonnet (G). (This occurs in
the standard relieving type regulator only.)

12 Parker Hannifin Corporation
Pneumatic Division North America
Pneumatic
Richland, Michigan

Catalog 0709/USA “Hi-Flow” Series, Piggybacks
3/4", 1", 1-1/2" – Basic 1" Body
Technical Specifications

Ordering P3N E A 9 8 G S M B N N
Information

Design Port Size Element Bowl Drains Type Adjustment Pressure Gauge
Level
6. 3/4" A. Adsorber S. Metal M. Manual B. Relieving N. Non- w/o Gauge
Port Type (w/o Port E. 5 Micron Bowl Twist Drain N. Non- Rising L. 60 PSI
Blocks) G. 40 Micron w/ Sight Knob
1. G Thread Gauge A. Automatic Relieving (0 to 4 bar)
(BSP) 8. 1" Drain N. 125 PSI
Female (w/o Port
Blocks) P. Push ‘N’ (0 to 8 bar)
2. Rc Thread Drain H. 250 PSI
(BSPT) P. 1-1/2" Port
Female Blocks (w/ (0 to 17 bar)
1" Ported w/ Gauge
9. NPT Body) M. 60 PSI
Female
(0 to 4 bar)
NOTE: Shaded items are standard. G. 125 PSI

(0 to 8 bar)
J. 250 PSI

(0 to 17 bar)

Technical Information

Pressure Drop (bar) 120 Flow and Flow Characteristics Pressure Drop (bar) 120 Flow and Flow Characteristics
Pressure Drop (PSID)8 P3NE Pressure Drop (PSID)8 P3NE
7 105 7 105 1 Inch Ports
6 90 3/4 Inch Ports 6 90 Primary Pressure
5 75 Primary Pressure 5 75 100 PSIG (6.9 bar)
4 60 100 PSIG (6.9 bar) 4 60
3 45 3 45 0 100 200 300 400 500 600
2 30 0 100 200 300 400 500 600 2 30
1 15 1 15 Flow (SCFM)
00 Flow (SCFM) 00
0 50 100 150 200 250
-100 0 50 100 150 200 250 -100
Flow - dm3/s
-50 Flow - dm3/s -50 n
n
120
8 Flow and Flow Characteristics
7 105 P3NE
6 90
Pressure Drop (bar) 5 75 1-1/2 Inch Ports
Pressure Drop (PSID)4 60 Primary Pressure
3 45 100 PSIG (6.9 bar)
2 30
1 15 0 100 200 300 400 500 600 Specifications
00
Flow (SCFM) Adjusting Stem ....................................................................... Steel
-100 Body, Bonnet, Bowl ........................................................ Aluminum
0 50 100 150 200 250 Bowl Capacity ............................................................ 18.0 Ounces
-50 Sump Capacity ............................................................ 6.8 Ounces
Flow - dm3/s Piston .................................................................................... Plastic
n Drain ...................................................................................... Plastic
Filter Elements – 40 Micron Standard ................................ Plastic
Piggyback Kits
5 Micron Optional .................................... Plastic
Drain Kit – Automatic Drain ................................................ PS506P Knob ...................................................................................... Plastic
Twist Drain Kit .................................................................... PS512P Port Threads .......................................................... 3/4", 1", 1-1/2" #
Filter Element Kits – 40 Micron ............................. P3NKA00ESG Pressure & Temperature Rating ........ 0 to 250 PSIG (0 to 17 bar)

5 Micron ................................ P3NKA00ESE 32°F to 175°F (0°C to 80°C)
Sight Gauge Kit .......................................................... P3NKA00PE For Secondary Pressure Ranges see above charts.
Gauges – 60 PSIG ......................................................... P781641
Seals ....................................................................................... Nitrile
160 PSIG ......................................................... P781642 Sight Gauge ...................................................... Polyamide (Nylon)
300 PSIG ......................................................... P781643 Springs – Poppet & Control ..................................................... Steel
Mounting Bracket Kit .............................................. P3NKA00MW Weight –
Springs – 1-60 PSIG Range ........................................... C10A1304
2-125 PSIG Range ......................................... C10A1308 3/4" ......................................................................... 5.3 lb. (2.4 kg)
5-250 PSIG Range ......................................... C10A1317 1" ............................................................................. 5.3 lb. (2.4 kg)
Repair Kit – Relieving ................................................. P3NKA00RR 1-1/2" # .................................................................. 6.43 lb. (2.9 kg)

Non-Relieving ......................................... P3NKA00RN # 1" Port Body with 1-1/2" Port Block.
Control Knob .............................................................. P3NKA00PN

13 Parker Hannifin Corporation
Pneumatic Division North America
Pneumatic Richland, Michigan

Catalog 0709/USA “Hi-Flow” Series, Mist Lubricators
3/4", 1", 1-1/2" – Basic 1" Body
Features & Operation

Mist Lubricators

Features A (PB)
A
• Port blocks (PB) available to provide 1-1/2"
port extension to 1" ported bodies. B

• Proportional oil delivery over a wide range C
of air flows.
E
• Bowl can be filled while air line is D
under pressure.

• Transparent sight dome for 360° visibility.

• High Flow 260 SCFM. §

Distance Required

F To Remove All
Bowls

Port NPT BSPP Lubricator Dimensions
Size No Drain No Drain
P3NLA96LSN P3NLA16LSN A A (PB) B C
3/4"
3.62 5.59 3.62 2.81

92mm 142mm 92mm 71.3mm

1" P3NLA98LSN P3NLA18LSN DEF
9.00 11.81 4.92
1-1/2" # P3NLA9PLSN P3NLA1PLSN 229mm 300mm 125mm

# 1" Port Body with 1-1/2" Port Block.
† For other models, refer to matrix.
§ SCFM = Standard cubic feet per minute at 90 PSIG inlet and 5 PSIG pressure drop.

Operation À G H venturi section (B) creates a pressure drop at throat
I section (F). This lower pressure allows oil to be forced
A À ÀF from the reservoir through the pickup tube (E) past the
check ball (J), to the dome assembly where the
BÀ J rate of oil flow is controlled by knob (G). Rotation of the
E knob (G) in the counterclockwise direction increases the
C oil flow rate; in the clockwise direction decreases the oil
D flow rate. Oil then flows through the clearance between
E inner and outer sight domes (H) where drops are formed
and drip into the throat section (I). Here it is then broken
Bowl shown into fine particles and mixed with the swirling air to be
rotated 90° for carried to the venturi outlet where it joins the air by
illustration passing the flapper (A). As air flow rate increases, the
purposes flapper (A) deflects, allowing a greater part of the
additional air to bypass the venturi section (B). This
Air flowing through the unit goes through two paths. At low assures the oil delivery rate increases linearly with
air flow rates, the majority of the air flows through venturi increased air flow rate. The check ball (J) assures that
section (B). The rest of the air slightly deflects and flows when there is no flow, the oil in the pickup tube does not
by the flapper (A). The velocity of the air flowing through return to the reservoir.

The bowl can be filled under pressure due to the action of
the check ball (C). When the fill cap is removed, air in the
bowl escapes and pressure forces the check ball (C) to
nearly seal at (D). When the fill cap is replaced, the small
amount of air flow past check ball (C) builds up pressure
and together with the spring forces the check ball (C) off
seat (D), letting full line pressure into the bowl.

14 Parker Hannifin Corporation
Pneumatic Division North America
Pneumatic
Richland, Michigan

Catalog 0709/USA “Hi-Flow” Series, Mist Lubricators
3/4", 1", 1-1/2" – Basic 1" Body
Technical Specifications

Ordering P3N L A 9 8 L S N
Information

Design Port Type Port Size Type Bowl Drain / Fill Device
Level
1. G Thread 6. 3/4" (w/o Oil Mist S. Metal Bowl w/ N. No Drain, Solid
(BSP) Female Port Blocks) Sight Gauge Bowl / Fill Plug
L. w/ Polycarbonate
2. Rc Thread 8. 1" (w/o Sight Dome M. Manual Twist
(BSPT) Female Port Blocks) Drain / Fill Plug
A. w/ Nylon
9. NPT Female P. 1-1/2" Port Sight Dome H. No Drain / Body
Blocks (w/ 1" Pressure Fill
Ported Body)
J. Manual Twist
Drain / Body
Pressure Fill

NOTE: Shaded items are standard.

Technical Information

Primary Pressure - bar Primary Pressure - bar

2.4 bar 6.2 bar 10.3 bar 2.4 bar 6.2 bar 10.3 bar

Primary Pressure - PSIG Primary Pressure - PSIG

10 35 PSIG 90 PSIG 150 PSIG 10 35 PSIG 90 PSIG 150 PSIG
9
Pressure Drop (bar) Flow Characteristics Pressure Drop (bar) 9 Flow Characteristics
Pressure Drop (PSID).6 P3NL 3/4 Inch Ports Pressure Drop (PSID).6 P3NL 1 Inch Ports
8
100 200 300 400 500 600 8 100 200 300 400 500 600 700
.5 7 .5 7
Flow (SCFM) Flow (SCFM)
.4 6 .4 6
5 50 100 150 200 250 5

.3 Flow - dm3/s .3
4 4
n
.2 3 .2 3

2 2
.1 .1

1 1

00 00
0 0

0 0 50 100 150 200 250 300

Flow - dm3/s

n

Primary Pressure - bar

2.4 bar 6.2 bar 10.3 bar

Primary Pressure - PSIG

10 35 PSIG 90 PSIG 150 PSIG
9
Pressure Drop (bar) Flow Characteristics
Pressure Drop (PSID).6 P3NL 1-1/2 Inch Ports
8
100 200 300 400 500 600 700 Specifications
.5 7
Flow (SCFM) Body, Bowl ...................................................................... Aluminum
.4 6 Bowl Capacity ............................................................ 18.0 Ounces
5 50 100 150 200 250 300 Drains: Manual Twist Drain (Optional) .................................. Plastic
Injector Meter Block & Base Assembly ............................ Plastic
.3 Flow - dm3/s Pressure & Temperature Rating ....... 0 to 250 PSIG (0 to 17 bar)
4
n 32°F to 175°F (0°C to 80°C)
.2 3 Seals ....................................................................................... Nitrile
Sight Dome ............................................................... Polycarbonate
2 Sight Gauge ...................................................... Polyamide (Nylon)
.1 Suggested Lubricant ....................................................... F442 Oil
Weight –
1
3/4" ......................................................................... 3.5 lb. (1.6 kg)
00 1" ............................................................................. 3.5 lb. (1.6 kg)
0 1-1/2" # .................................................................... 4.6 lb. (2.1 kg)

0 # 1" Port Body with 1-1/2" Port Block.

Lubricator Kits

Twist Drain Kit ................................................................... PS512P
Sight Dome Kit

Polycarbonate .................................................................. PS740P
Nylon ............................................................................... PS740N
Sight Gauge Kit ......................................................... P3NKA00PE
Pressure Fill Adapter Kit .......................................... P3NKA00PK
Service Kit .................................................................. P3NKA00RL
Mounting Bracket Kit .............................................. P3NKA00MW

15 Parker Hannifin Corporation
Pneumatic Division North America
Pneumatic
Richland, Michigan

Catalog 0709/USA “Hi-Flow” Series, Modular
2 & 3-Unit Combinations
Model Numbers & Dimensions

Modular Combinations

• Regulator can be mounted with knob in up or down position.
• See individual component pages for details.

Two-Unit A2 A3 (w/ Mtg Brkts & Port Blocks) B2
Combo (w/ Mtg Brkts, (w/ Mtg Brkts)
w/o Port Blocks) A1 (Port Blocks)
A B1
B

C

• 40 Micron Filter Element E
• Manual Twist Drain D
• Relieving Regulator
• 125 PSI (8.6 bar)

Series Port Model Numbers A A1 A2 A3 B B1 B2
7.24 9.21 9.84 11.81 3.62 5.20 5.74
3/4" P3NCA96SGMNNLNA 184mm 234mm 250mm 300mm 92mm 132mm 146mm

P3NCA 1" P3NCA98SGMNNLNA C D E F
6.38 9.57 15.95 4.92
1-1/2" ‡ P3NCA9PSGMNNLNA 162mm 243mm 405mm 125mm

Notes: All Combo part numbers are with regulator knob in up position. • All dimensions nominal.
See Regulator Pressure Adjustment Caution on page 19. • Mounting brackets not included (change last character in

‡ 1" Port Body with 1-1/2" Port Block. model number to “B” if required).
• Gauges not included (change 12th character to “G” if required).
• For other models, refer to matrix section.

Three-Unit A2 A3 (w/ Mtg Brkts & Port Blocks) B2
Combo (w/ Mtg Brkts, (w/ Mtg Brkts)
w/o Port Blocks) A1 (Port Blocks)
A B1
B

C

• 40 Micron Filter Element E
• Manual Twist Drain D
• Relieving Regulator
• 125 PSI (8.6 bar)

Series Port Model Numbers A A1 A2 A3 B B1 B2
10.87 12.83 13.46 15.43 3.62 5.20 5.74
3/4" P3NCB96SGMNNLNA 276mm 326mm 342mm 392mm 92mm 132mm 146mm

P3NCB 1" P3NCB98SGMNNLNA C D E F
6.38 9.57 15.95 4.92
1-1/2" # P3NCB9PSGMNNLNA 162mm 243mm 405mm 125mm

Notes: All Combo part numbers are with regulator knob in up position. • All dimensions nominal.
See Regulator Pressure Adjustment Caution on page 19. • Mounting brackets not included (change last character in

‡ 1" Port Body with 1-1/2" Port Block. model number to “B” if required).
• For other models, refer to matrix section. • Gauges not included (change 12th character to “G” if required).

16 Parker Hannifin Corporation
Pneumatic Division North America
Pneumatic
Richland, Michigan

Catalog 0709/USA “Hi-Flow” Series, Prep-Air® II
Modular Combinations
Model Number Matrix

Ordering Information

P3N C A 9 6 S G M NN L N A

Series Mounting
Options
Type Filter A. No Brackets
C. Combination - Elements or Kits
E. 5 Micron B. Wall Bracket
Modular G. 40 Micron
3. Combinations J. 25 Micron, Lubricator
Drain / Fill Devices
w/ Pipe Nipples Porous N. No Drain, Solid Bowl /
Bronze
Combination Fill Plug
Two-Unit Bowl M. Manual Twist Drain /
A. Piggyback F/R + S. Metal Bowl
Fill Plug
Lubricator w/ Sight A. Automatic Fill /
Three-Unit Gauge
B. Filter + Regulator Fill Plug
Filter Drains S. Semi-Auto Fill /
+ Lubricator M. Manual Twist Drain
A. Automatic Drain Fill Plug
Port Type P. Push ‘N’ Drain H. No Drain / Body
1. G Thread
Pressure Fill
(BSP) Female J. Manual Twist Drain /
2. Rc Thread
Body Pressure Fill
(BSPT) Female
9. NPT Female Lubricator Type

Port Size Regulator Oil Mist
Adjustment Type L. w/ Polycarbonate
6. 3/4" (w/o Port Blocks)
8. 1" (w/o Port Blocks) Relieving Sight Dome
H. 3/4" Port Blocks N. Non-Rising Knob A. w/ Nylon Sight Dome
Non-Relieving
(w/ 3/4" Ported Body) M. Non-Rising Knob Regulator Pressure
N. 1" Port Blocks Range & Gauges

(w/ 1" Ported Body) w/o Gauge
P. 1-1/2" Port Blocks L. 60 PSI (0 to 4 bar)
N. 125 PSI (0 to 8 bar)
(w/ 1" Ported Body) H. 250 PSI (0 to 17 bar)
w/ Gauge
M. 60 PSI (0 to 4 bar)
G. 125 PSI (0 to 8 bar)
J. 250 PSI ( 0 to 17 bar)

NOTE: Shaded items are standard.

Kits & Accessories

Wall Mounting Kit .................................................... P3NKA00MW

Port Block Kits: 3/4" 1" 1-1/2"

NPT ................ P3NKA96CP .... P3NKA98CP ...... P3NKA9PCP

BSPP ............. P3NKA16CP .... P3NKA18CP ...... P3NKA1PCP

17 Parker Hannifin Corporation
Pneumatic Division North America
Pneumatic Richland, Michigan

Catalog 0709/USA “Hi-Flow” Series, Prep-Air® II
P3N Series
Accessories

Mounting Brackets

P3NKA00MW

2.75 1.96 1.30
70mm 50mm 33mm

1.77
45mm

2.36
60mm

Replacement Body Covers

P3NKA00PM

Each Kit contains
two covers.
All units are shipped
with body covers.

18 Parker Hannifin Corporation
Pneumatic Division North America
Pneumatic
Richland, Michigan

Catalog 0709/USA “Hi-Flow” Series, Prep-Air® II
P3N Series
Accessories

Port Block Kits

3/4" 1" 1-1/2"
NPT ........ P3NKA96CP ...... P3NKA98CP ..... P3NKA9PCP
BSPP ..... P3NKA16CP ...... P3NKA18CP ..... P3NKA1PCP

Port Block Kits allow units to be installed or removed as
modular components.

Each Kit includes all the necessary pieces to make
two port connections.

OIL

CAUTION: REGULATOR PRESSURE ADJUSTMENT – The working range of knob adjustment is designed to
permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible
because the knob is not a limiting device. This is a common characteristic of most industrial regulators,
and limiting devices may be obtained only by special design.

19 Parker Hannifin Corporation
Pneumatic Division North America
Pneumatic Richland, Michigan

Offer of Sale “Hi-Flow” Series, Prep-Air® II
Air Preparation Units

The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and
its authorized distributors, are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its
authorized distributors. This offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and
Conditions. Buyer’s order for any such item, when communicated to Parker Hannifin Corporation, its subsidiaries or an authorized
distributor (“Seller”) verbally or in writing, shall constitute acceptance of this offer.

1. Terms and Conditions of Sale: All descriptions, quotations, proposals, Buyer. Unless otherwise agreed, Seller shall have the right to alter, discard
offers, acknowledgments, acceptances and sales of Seller’s products are or otherwise dispose of any special tooling or other property in its sole
subject to and shall be governed exclusively by the terms and conditions discretion at any time.
stated herein. Buyer’s acceptance of any offer to sell is limited to these
terms and conditions. Any terms or conditions in addition to, or inconsistent 8. Buyer’s Property: Any designs, tools, patterns, materials, drawings,
with those stated herein, proposed by Buyer in any acceptance of an offer confidential information or equipment furnished by Buyer, or any other
by Seller, are hereby objected to. No such additional, different or inconsistent items which become Buyer’s property, may be considered obsolete and
terms and conditions shall become part of the contract between Buyer and may be destroyed by Seller after two (2) consecutive years have elapsed
Seller unless expressly accepted in writing by Seller. Seller’s acceptance without Buyer placing an order for the items which are manufactured using
of any offer to purchase by Buyer is expressly conditional upon Buyer’s such property. Seller shall not be responsible for any loss or damage to
assent to all the terms and conditions stated herein, including any terms such property while it is in Seller’s possession or control.
in addition to, or inconsistent with those contained in Buyer’s offer.
Acceptance of Seller’s products shall in all events constitute such assent. 9. Taxes: Unless otherwise indicated on the face hereof, all prices and
charges are exclusive of excise, sales, use, property, occupational or like
2. Payment: Payment shall be made by Buyer net 30 days from the date taxes which may be imposed by any taxing authority upon the manufacture,
of delivery of the items purchased hereunder. Amounts not timely paid sale or delivery of the items sold hereunder. If any such taxes must be paid
shall bear interest at the maximum rate permitted by law for each month by Seller or if Seller is liable for the collection of such tax, the amount
or portion thereof that the Buyer is late in making payment. Any claims by thereof shall be in addition to the amounts for the items sold. Buyer agrees
Buyer for omissions or shortages in a shipment shall be waived unless to pay all such taxes or to reimburse Seller therefore upon receipt of its
Seller receives notice thereof within 30 days after Buyer’s receipt of the invoice. If Buyer claims exemption from any sales, use or other tax
shipment. imposed by any taxing authority, Buyer shall save Seller harmless from
and against any such tax, together with any interest or penalties thereon
3. Delivery: Unless otherwise provided on the face hereof, delivery shall which may be assessed if the items are held to be taxable.
be made F.O.B. Seller’s plant. Regardless of the method of delivery,
however, risk of loss shall pass to Buyer upon Seller’s delivery to a carrier. 10. Indemnity For Infringement of Intellectual Property Rights: Seller
Any delivery dates shown are approximate only and Seller shall have no shall have no liability for infringement of any patents, trademarks, copyrights,
liability for any delays in delivery. trade dress, trade secrets or similar rights except as provided in this Part
10. Seller will defend and indemnify Buyer against allegations of infringement
4. Warranty: Seller warrants that the items sold hereunder shall be free of U.S. patents, U.S. trademarks, copyrights, trade dress and trade
from defects in material or workmanship for a period of 18 months from secrets (hereinafter “Intellectual Property Rights”). Seller will defend at its
date of shipment from Parker Hannifin Corporation. THIS WARRANTY expense and will pay the cost of any settlement or damages awarded in an
COMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO action brought against Buyer based on an allegation that an item sold
ITEMS PROVIDED HEREUNDER. SELLER MAKES NO OTHER pursuant to this contract infringes the Intellectual Property Rights of a third
WARRANTY, GUARANTEE, OR REPRESENTATION OF ANY KIND party. Seller’s obligation to defend and indemnify Buyer is contingent on
WHATSOEVER. ALL OTHER WARRANTIES, INCLUDING BUT NOT Buyer notifying Seller within ten (10) days after Buyer becomes aware of
LIMITED TO, MERCHANTABILITY AND FITNESS FOR PURPOSE, such allegations of infringement, and Seller having sole control over the
WHETHER EXPRESS, IMPLIED, OR ARISING BY OPERATION OF defense of any allegations or actions including all negotiations for settlement
LAW, TRADE USAGE, OR COURSE OF DEALING ARE HEREBY or compromise. If an item sold hereunder is subject to a claim that it
DISCLAIMED. infringes the Intellectual Property Rights of a third party, Seller may, at its
sole expense and option, procure for Buyer the right to continue using said
NOTWITHSTANDING THE FOREGOING, THERE ARE NO item, replace or modify said item so as to make it noninfringing, or offer to
WARRANTIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED accept return of said item and return the purchase price less a reasonable
WHOLLY OR PARTIALLY, TO BUYER’S DESIGN OR SPECIFICATIONS. allowance for depreciation. Notwithstanding the foregoing, Seller shall
have no liability for claims of infringement based on information provided
5. Limitation of Remedy: SELLER’S LIABILITY ARISING FROM OR IN by Buyer, or directed to items delivered hereunder for which the designs
ANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACT are specified in whole or part by Buyer, or infringements resulting from the
SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENT modification, combination or use in a system of any item sold hereunder.
OF THE ITEMS SOLD OR REFUND OF THE PURCHASE PRICE PAID The foregoing provisions of this Part 10 shall constitute Seller’s sole and
BY BUYER, AT SELLER’S SOLE OPTION. IN NO EVENT SHALL exclusive liability and Buyer’s sole and exclusive remedy for infringement
SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR of Intellectual Property Rights.
SPECIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER,
INCLUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM OR If a claim is based on information provided by Buyer or if the design for an
IN ANY WAY CONNECTED WITH THIS AGREEMENT OR ITEMS SOLD item delivered hereunder is specified in whole or in part by Buyer, Buyer
HEREUNDER, WHETHER ALLEGED TO ARISE FROM BREACH OF shall defend and indemnify Seller for all costs, expenses or judgements
CONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT, resulting from any claim that such item infringes any patent, trademark,
INCLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO WARN copyright, trade dress, trade secret or any similar right.
OR STRICT LIABILITY.
11. Force Majeure: Seller does not assume the risk of and shall not be
6. Changes, Reschedules and Cancellations: Buyer may request to liable for delay or failure to perform any of Seller’s obligations by reason
modify the designs or specifications for the items sold hereunder as well of circumstances beyond the reasonable control of Seller (hereinafter
as the quantities and delivery dates thereof, or may request to cancel all “Events of Force Majeure”). Events of Force Majeure shall include without
or part of this order, however, no such requested modification or cancellation limitation, accidents, acts of God, strikes or labor disputes, acts, laws,
shall become part of the contract between Buyer and Seller unless rules or regulations of any government or government agency, fires,
accepted by Seller in a written amendment to this Agreement. Acceptance floods, delays or failures in delivery of carriers or suppliers, shortages of
of any such requested modification or cancellation shall be at Seller’s materials and any other cause beyond Seller’s control.
discretion, and shall be upon such terms and conditions as Seller may
require. 12. Entire Agreement/Governing Law: The terms and conditions set
forth herein, together with any amendments, modifications and any
7. Special Tooling: A tooling charge may be imposed for any special different terms or conditions expressly accepted by Seller in writing, shall
tooling, including without limitations, dies, fixtures, molds and patterns, constitute the entire Agreement concerning the items sold, and there are
acquired to manufacture items sold pursuant to this contract. Such special no oral or other representations or agreements which pertain thereto. This
tooling shall be and remain Seller’s property notwithstanding payment of Agreement shall be governed in all respects by the law of the State of Ohio.
any charges by Buyer. In no event will Buyer acquire any interest in No actions arising out of sale of the items sold hereunder or this Agreement
apparatus belonging to Seller which is utilized in the manufacture of the may be brought by either party more than two (2) years after the cause of
items sold hereunder, even if such apparatus has been specially converted action accrues.
or adapted for such manufacture and notwithstanding any charges paid by

20 Parker Hannifin Corporation
Pneumatic Division North America
Pneumatic
Richland, Michigan

Parker Hannifin Corporation Parker Hannifin Corporation
6035 Parkland Blvd.
Cleveland, Ohio 44124-4141
Telephone: (216) 896-3000
Fax: (216) 896-4000
www.parker.com

About Parker Hannifin Corporation Parker’s Charter
Parker Hannifin is a leading global motion-control To be a leading worldwide manufacturer of
company dedicated to delivering premier customer components and systems for the builders and users of
service. A Fortune 500 corporation listed on the New durable goods. More specifically, we will design,
York Stock Exchange (PH), our components and market and manufacture products controlling motion,
systems comprise over 1,400 product lines that flow and pressure. We will achieve profitable growth
control motion in some 1,000 industrial and through premier customer service.
aerospace markets. Parker is the only manufacturer
to offer its customers a choice of hydraulic, Product Information
pneumatic, and electromechanical motion-control North American customers seeking product
solutions. Our Company has the largest distribution information, the location of a nearby distributor, or
network in its field, with over 7,500 distributors repair services will receive prompt attention by calling
serving nearly 400,000 customers worldwide. the Parker Product Information Center at our toll-free
number: 1-800-C-PARKER (1-800-272-7537). In
Europe, call 00800-C-PARKER-H (00800-2727-5374).

The Aerospace Group is The Climate & Industrial
a leader in the development, Controls Group designs,
design, manufacture and manufactures and markets
servicing of control systems and system-control and fluid-
components for aerospace and handling components and
related high-technology systems to refrigeration, air-
markets, while achieving conditioning and industrial
growth through premier customers worldwide.
customer service.
The Seal Group designs,
The Fluid Connectors manufactures and
Group designs, manufactures distributes industrial and
and markets rigid and flexible commercial sealing devices
connectors, and associated and related products by
products used in pneumatic providing superior quality
and fluid systems. and total customer
satisfaction.

The Hydraulics Group The Filtration Group

designs, produces and designs, manufactures and
markets a full spectrum of markets quality filtration
hydraulic components and and clarification products,
systems to builders and providing customers with
users of industrial and the best value, quality,
mobile machinery and technical support, and global
equipment. availability.

The Automation Group The Instrumentation
is a leading supplier of Group is a global leader in
pneumatic and the design, manufacture and
electromechanical distribution of high-quality
components and systems critical flow components for
to automation customers worldwide process
worldwide. instrumentation, ultra-high-
purity, medical and
analytical applications.

Pneumatic Products

• Air Control Valves & Accessories
• Air Preparation Units
• Fittings & Tubing

Pneumatic Concise Catalog 1-800-C-Parker Catalog 0600P-3/USA
Catalog 0150/USA
• Air Control Valves & Accessories
• Air Preparation Units
• Fittings & Tubing
• Pneumatic Cylinder & Actuators
• Rotary Actuators & Pick ‘n’ Place
• Vacuum & End Effectors
• Structural Framing

Parker Hannifin Corporation Customer/Technical Service
Pneumatic Division North America
8676 E. M89 Tel: (616) 629-5575
P.O. Box 901 Fax: (800) 648-5480
Richland, MI 49083 USA Fax: (800) 426-3259
Tel: (616) 629-5000 Web site: www.parker.com/pneumatic
Fax: (616) 629-5385 E-mail: [email protected]

Catalog 0709/USA 1/2000 15M IGS Printed in U.S.A.