Editing the data on the use of navigation function Chapter
07
4 Touch [Delete]. 1 Display the “Edit/Settings” screen.
5 Select the location you want to delete. = For details of the operations, refer to How to
use the navigation menu screens on page
A tick mark appears next to the selected loca- 22.
tion.
# If you touch [All], you can select all entries. If 2 Touch [Data Edit].
you want to deselect all entries, touch [None]. The “Edit” screen appears.
6 Touch [Delete].
3 Touch [Delete search history].
The “History” screen appears.
4 Select the location you want to delete.
A tick mark appears next to the selected loca- Editing the data on the use of navigation function
tion.
# If you touch [All], you can select all entries. If
you want to deselect all entries, touch [None].
5 Touch [Delete].
A message will appear asking you to confirm
the deletion.
7 Touch [Yes].
The data you selected is deleted. A message will appear asking you to confirm
# If you touch [No], the deletion is cancelled. the deletion.
Deleting the destination 6 Touch [Yes].
history from the list The data you selected is deleted.
# If you touch [No], the deletion is cancelled.
Items in “History” can be deleted. All entries
in “History” can be deleted collectively.
Engb 51
Chapter
07 Editing the data on the use of navigation function
Deleting learned routes
The device learns the streets you often use,
and the learned streets are preferentially used
during a route search. To change a frequently
used street, delete the learned route and let
the device learn it again.
p Please note that all the learned routes will
be deleted.
1 Display the “Edit/Settings” screen.
= For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Data Edit].
The “Edit” screen appears.
3 Touch [Delete learned routes].
A confirmation message appears.
4 Touch [Yes].
Deletes the learned routes.
Deleting track logs
You can delete track logs displayed on the
map screen.
p You can also automatically delete track
logs.
1 Display the “Edit/Settings” screen.
= For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Data Edit].
The “Edit” screen appears.
3 Touch [Delete travel log].
A confirmation message appears.
4 Touch [Yes].
Deletes the track log.
52 Engb
Using traffic information Chapter
08
You can check real-time traffic information 2 Touch [Trfc info.]. Using traffic information
transmitted by the Traffic Message Channel The “Traffic information menu” screen ap-
(TMC) of the FM Radio Data System (RDS) on pears.
screen. The traffic information is updated peri-
odically. When the navigation system receives 3 Touch [Nearby incidents].
updated traffic information, the navigation sys- The “Nearby” screen appears.
tem will show it on map and display detailed A list with received traffic information is
text information when available. When you re- shown.
ceive information concerning traffic incidents
on your route, the system will suggest another 4 Select an incident you want to view in
route to avoid traffic jams. detail.
p The system acquires the traffic information
23 4
within a radius of up to 150 km from the ve-
hicle position. (If there is a lot of traffic in- 1
formation around your vehicle, the radius
will be shorter than 150 km.) 1 Listed items
p The navigation system provides the follow- The details of the selected incident are dis-
ing functions by using the information played.
from RDS-TMC service:
! Displaying a list of traffic information 2 refresh
! Displaying traffic information on a map If you touch [refresh] while new traffic in-
! Suggesting a route to avoid traffic jams formation is received, the current informa-
tion is updated and old information is
by using traffic information removed. The traffic information list is up-
p The term “traffic jam” in this section refers dated to reflect the new situation.
to the following types of traffic information: 3 Sort
slow and queuing traffic, stationary traffic Touching the key displays the following
and closed/blocked roads. This information pop-up menu to sort the traffic information.
is always taken into consideration when ! By distance:
checking your route, and the information You can sort traffic information by dis-
related to these events cannot be turned tance from your current position.
off. When you touch [Nearby incidents],
the list displayed will be sorted accord-
Checking all traffic ing to the linear distance from the vehi-
information cle position to the traffic information.
When you touch [Traffic on route], the
Traffic information is displayed on a screen in list displayed will be sorted according to
the form of a list. This allows you to check how the distance from the vehicle position to
many traffic incidents have occurred, their lo- the traffic information.
cation and their distance from your current po- ! By name:
sition. You can sort the traffic information in al-
phabetical order.
1 Display the “Information” screen.
= For details of the operations, refer to How to
use the navigation menu screens on page
22.
Engb 53
Chapter
08 Using traffic information
! By event: scale is changed, the icons are resized ac-
You can sort the traffic information ac- cording to the selected scale.
cording to the incident.
The list will be sorted in the order of Traffic event icon
closed/blocked roads, traffic jams, acci-
dents, road works and others. ! with yellow line:
Slow and queuing traffic
4
The details of the selected incident are dis- ! with red line:
played. Stationary traffic
5 Touch . ! with black line:
The previous screen returns. Closed/blocked roads
Checking traffic ! etc.:
information on the route Accidents, constructions, etc.
All traffic information on the current route is Setting an alternative
displayed on screen in a list. route to avoid traffic jams
1 Display the “Information” screen. If the navigation system detects any traffic
= For details of the operations, refer to How to jams on your current route, the system tries to
use the navigation menu screens on page find a better route in the background.
22. p This function is available when both “Traf-
2 Touch [Trfc info.]. fic avoidance” and “Auto reroute” are set
The “Traffic information menu” screen ap- to “On”.
pears. = For details, refer to Setting the route al-
3 Touch [Traffic on route]. ternatives function to avoid traffic jams
The “On route” screen appears. and closed/blocked roads on page 133.
The method for checking the content dis- p The following types of traffic incidents on
played on the screen is the same as “Nearby” the route will be checked for: slow, queuing
screen. and stationary traffic, and closed/blocked
roads except for closed motorway exits/en-
= For details, refer to Checking all traffic infor- trances.
mation on page 53.
How to read traffic
information on the map
The traffic event information displayed on the
map is as follows.
p A line is displayed only when the map scale
is 5 km (2.5 miles) or lower.
p Icons appear only when the scale on the
map is 20 km (10 miles) or lower. If the
54 Engb
Using traffic information Chapter
08
Checking for traffic jams Selecting the preferred RDS- Using traffic information
automatically TMC service provider manually
If there is information about traffic jams on A default preferred TMC service provider for
your current route and if an alternative route each country has been set. The navigation sys-
can be found, the navigation system will re- tem tunes to the radio station with good recep-
commend a new alternative route automati- tion among the preferred RDS-TMC service
cally. In such a case, the following screen will providers. If you want to set another preferred
appear. RDS-TMC service provider, you can manually
select one from the available RDS-TMC service
1 providers.
2
3 1 Display the “Information” screen.
= For details of the operations, refer to How to
1 Distance from the current position of your ve- use the navigation menu screens on page
hicle to the point of entry into the new route. 22.
2 Difference in distance between the existing 2 Touch [Trfc info.].
route and new route. The “Traffic information menu” screen ap-
pears.
3 Difference in travel time between the existing
route and new route. 3 Touch [TMC Provider Selection].
p No action is taken if the system cannot find 4 Touch the desired service provider on
any traffic jam information on your route or the list.
cannot find an alternative. After touching a service provider, the system
starts tuning to the selected RDS-TMC service
% Touch [Alt. route]. provider. When the tuning is successful, the
The recommended route is set as your route, system returns to the map display.
and the route guidance starts.
p When no selection is made, the recom-
mended route or the current route will be
automatically selected according to the set-
tings. And the route guidance starts.
= For details, refer to Setting to select your
route automatically using the route alterna-
tives function on page 132.
# If you touch [Current route] while the recom-
mended route is displayed, the screen switches
to the current route displayed, and route gui-
dance starts.
# If you touch [Scroll map], you can switch the
map scale or the map orientation and confirm
the route.
Engb 55
Chapter
09 Registering and connecting a Bluetooth device
If your devices feature Bluetooth® technology, ! Pairing from your Bluetooth devices
this navigation system can be connected to p If you try to register more than 5 devices,
your devices wirelessly. This section describes
how to set up a Bluetooth connection. the system will ask you to select one of the
registered devices to delete.
For details about the connectivity with the de- = For details, refer to Deleting a registered
vices featuring Bluetooth wireless technology,
refer to the information on our website. device on page 59.
Preparing communication Searching for nearby Bluetooth
devices devices
This navigation system has a built-in function The system searches for available Bluetooth
to use devices featuring Bluetooth wireless devices near the navigation system, displays
technology. them in a list, and registers them for connec-
= For details, refer to Notes for hands-free tion.
phoning on page 69. 1 Activate the Bluetooth wireless tech-
You can register and use devices that feature nology on your devices.
the following profiles with this navigation sys- For some Bluetooth devices, no specific-action
tem. is necessary to activate Bluetooth wireless
! HFP (Hands-Free Profile) technology. For details, refer to the instruction
! A2DP (Advanced Audio Distribution Pro- manual of your devices.
file) 2 Display the “Phone” screen.
! SPP (Serial Port Profile) = For details of the operations, refer to How to
p When the navigation system is turned off, use the navigation menu screens on page
22.
the Bluetooth connection is also discon-
nected. When the system restarts, the sys- 3 Touch [Bluetooth Settings].
tem automatically attempts to reconnect The “Bluetooth Settings” screen appears.
the previously-connected device. Even
when the connection is severed for some 4 Touch [Registration].
reason, the system automatically recon- The “Device list” screen appears.
nects the specified device (except when the The system searches for Bluetooth devices
connection is severed due to device oper- waiting for the connection and displays them
ation). in the list if a device is found.
p Up to 10 devices will be listed in the order
that the devices are found.
Registering your Bluetooth
devices
You need to register your devices featuring
Bluetooth wireless technology when you con-
nect it for the first time. A total of 5 devices
can be registered. Two registration methods
are available:
! Searching for nearby Bluetooth devices
56 Engb
Registering and connecting a Bluetooth device Chapter
09
5 Wait until your Bluetooth device ap- ing on the Bluetooth device. Perform pairing Registering and connecting a Bluetooth device
pears in the list. according to the screen instructions for this
product or Bluetooth device. Refer to the in-
p If you cannot find the Bluetooth device that struction manual of your devices to register
you want to connect, check that the device (registration and authentication of device).
is waiting for the Bluetooth wireless tech- After registering, a confirmation message ap-
nology connection. pears.
6 Touch the Bluetooth device name you 8 Touch [OK].
want to register. The registration is complete, and the device is
connected as a hands-free phone.
# If you touch [Search], the system starts You can perform the following setting depend-
searching for Bluetooth devices waiting for con- ing on the Bluetooth device registered.
nection, and displays them in the list format
when any devices are detected. ! Transferring the phone book
7 Pair this navigation system with your You can transfer the phone book to the navi-
Bluetooth device. gation system if the registered Bluetooth
When the Bluetooth device connects to this device features PBAP (Phone Book Access
product for the first time, a pairing operation Profile).
is needed to specify the device to connect. If you touch [Yes], you can transfer the
How the pairing is performed varies depend- whole phone book to the navigation system,
and then the message that transfer is fin-
ished appears.
! Selecting whether to use the Bluetooth
audio
You can select whether to use the
Bluetooth audio function if the registered
Bluetooth device features Bluetooth audio.
The message “Is this Android?” appears.
9 Touch [Yes] if the Bluetooth device you
connected is an Android device.
! Yes:
Allows you to proceed to the next step.
! No:
The device is registered in the navigation
system. After the device is successfully re-
gistered, the Bluetooth connection is estab-
lished from the navigation system.
p Only the Android device can perform the
smartphone cooperation function
(AppRadio Mode and aha) via Bluetooth
wireless technology.
The message “Do you want to set this de-
vice for the AppRadio Mode?” appears.
Engb 57
Chapter
09 Registering and connecting a Bluetooth device
10 Touch [Yes] if you use the AppRadio When the device is successfully registered,
Mode with a device you registered. the connection settings are made from the de-
vice.
! Yes:
Allows you to proceed to the next step. p If registration fails, repeat the procedure
from the beginning.
! No:
The device is registered in the navigation 7 Touch [OK].
system. After the device is successfully re- The registration is complete, and the device is
gistered, the Bluetooth connection is estab- connected as a hands-free phone.
lished from the navigation system. You can perform the following setting depend-
ing on the Bluetooth device registered.
11 Touch [OK].
! Transferring the phone book
Pairing from your Bluetooth You can transfer the phone book to the navi-
devices gation system if the registered Bluetooth
device features PBAP (Phone Book Access
You can register the Bluetooth device by set- Profile).
ting the navigation system to standby mode If you touch [Yes], you can transfer the
and requesting connection from the Bluetooth whole phone book to the navigation system,
device. and then the message that transfer is fin-
ished appears.
1 Activate the Bluetooth wireless tech-
nology on your devices. ! Selecting whether to use the Bluetooth
For some Bluetooth devices, no specific-action audio
is necessary to activate Bluetooth wireless You can select whether to use the
technology. For details, refer to the instruction Bluetooth audio function if the registered
manual of your devices. Bluetooth device features Bluetooth audio.
2 Display the “Phone” screen. The message “Is this Android?” appears.
= For details of the operations, refer to How to
use the navigation menu screens on page 8 Touch [Yes] if the Bluetooth device you
22. connected is an Android device.
3 Touch [Bluetooth Settings]. ! Yes:
The “Bluetooth Settings” screen appears. Allows you to proceed to the next step.
4 Touch [Registration]. ! No:
The “Device list” screen appears. The device is registered in the navigation
system. After the device is successfully re-
5 Touch [Register from device]. gistered, the Bluetooth connection is estab-
The navigation system waits for a Bluetooth lished from the navigation system.
wireless technology connection.
p Only the Android device can perform the
6 Register the navigation system on your smartphone cooperation function
Bluetooth device. (AppRadio Mode and aha) via Bluetooth
If your device asks you to enter a password, wireless technology.
enter the password of the navigation system.
The message “Do you want to set this de-
vice for the AppRadio Mode?” appears.
9 Touch [Yes] if you use the AppRadio
Mode with a device you registered.
! Yes:
Allows you to proceed to the next step.
58 Engb
Registering and connecting a Bluetooth device Chapter
09
! No: navigation system needs to set another de- Registering and connecting a Bluetooth device
The device is registered in the navigation vice for priority connecting.
system. After the device is successfully re-
gistered, the Bluetooth connection is estab- Connecting a registered
lished from the navigation system. Bluetooth device manually
10 Touch [OK]. The navigation system automatically connects
the Bluetooth device selected as the target of
Deleting a registered device connection. However, connect the Bluetooth
device manually in the following cases:
When you have already registered 5 Bluetooth ! Two or more Bluetooth devices are regis-
devices and you want to add another, you
must first delete one of the registered devices. tered, and you want to manually select the
p If a registered phone is deleted, all the device to be used.
! You want to reconnect a disconnected
phone book entries and call history lists Bluetooth device.
that correspond to the phone will be also ! Connection cannot be established automa-
cleared. tically for some reason.
If you start connection manually, carry out the
1 Display the “Phone” screen. following procedure. You can also connect the
= For details of the operations, refer to How to Bluetooth device by having the navigation sys-
use the navigation menu screens on page tem detect it automatically.
22.
1 Activate the Bluetooth wireless tech-
2 Touch [Bluetooth Settings]. nology on your devices.
The “Bluetooth Settings” screen appears. For some Bluetooth devices, no specific-action
is necessary to activate Bluetooth wireless
3 Touch [Delete device]. technology. For details, refer to the instruction
The “Delete registered device” screen ap- manual of your devices.
pears.
2 Display the “Phone” screen.
4 Touch the Bluetooth device name that = For details of the operations, refer to How to
you want to delete. use the navigation menu screens on page
22.
A message prompting you to delete a regis-
tered device appears. 3 Touch [Bluetooth Settings].
The “Bluetooth Settings” screen appears.
5 Touch [Yes].
The device is deleted. 4 Touch [Change device].
The “Change Bluetooth device” screen ap-
p If the device you deleted was set for the pears.
priority connecting as a hands-free phone,
Bluetooth audio player or smartphone, this
Engb 59
Chapter
09 Registering and connecting a Bluetooth device
5 Touch the name of the device that you p To cancel the connection to your device,
want to connect. touch [Cancel].
p If connection fails, check whether your de-
vice is waiting for a connection and then
retry.
8 Touch [OK].
6 Touch the profile that you want to con- Setting for priority connecting
nect.
The selected device is set for priority connect-
You can select the following profiles: ing.
! Handsfree: And one of the following icons is indicated
Connects the device as a hands-free phone. next to the device name.
! Bluetooth Audio:
Connects the device as a Bluetooth audio Appears when the device is registered
player. so that it will be preferentially paired
! AppRadio Mode (Android): with the smartphone in AppRadio
Connects the device as a smartphone in Mode.
AppRadio Mode.
Appears when the device is registered
7 Touch [OK]. so that it will be preferentially paired
Connection starts. with the Bluetooth audio connection.
p If you select the “AppRadio Mode Appears when the device is registered
(Android)” when “App connection set- so that it can be preferentially paired
tings” is set to “iPhone”, “Device Selection with the hands-free connection.
for AppRadio Mode” appears. Select
whether smartphone cooperation is per-
formed with an Android device.
= For details, refer to Selecting the device
connection method on page 148.
When a connection is successfully estab-
lished, a connection complete message ap-
pears and the map screen returns by touching
[OK].
60 Engb
Using hands-free phoning Chapter
10
CAUTION 4 Strength of the Bluetooth connection be-
For your safety, avoid talking on the phone as tween the navigation system and the device
much as possible while driving.
5 Name of the connected mobile phone
If your mobile phone features Bluetooth tech-
nology, this navigation system can be con- Making a phone call
nected to your mobile phone wirelessly. Using
this hands-free function, you can operate the You can make a phone call in many different
navigation system to make or receive phone ways.
calls. You can also transfer the phone book
data stored in your mobile phone to the navi- 5
gation system. This section describes how to
set up a Bluetooth connection and how to op-
erate a mobile phone featuring Bluetooth
technology on the navigation system.
For details about the connectivity with the de- 1 23 4
vices featuring Bluetooth wireless technology,
refer to the information on our website. 1 Using hands-free phoning
Displaying the phone menu The call ends.
2,
Use the “Phone” if you connect the mobile
phone to the navigation system for utilisation. The hands-free function is turned on or off. If
= For details, refer to Chapter 9. you want to talk on the mobile phone, turn off
the hands-free function.
1 Press the HOME button to display the 3
“Top Menu” screen.
The dial pad appears.
2 Touch [Phone]. 4,
The “Phone” screen appears.
You can adjust the volume when talking.
12 3 45 5
The operation menu during call is minimised.
Direct dialling
1 Display the “Phone” screen.
= For details, refer to Displaying the phone
menu on page 61.
2 Touch [Dial Pad].
1 Reception status of the mobile phone
2 Network name of the mobile phone com-
pany
3 Battery status of the mobile phone
Engb 61
Chapter
10 Using hands-free phoning
3 Touch the number keys to enter the Calling a number in the phone
phone number. book
When the input is complete, [OK] becomes You can select and call a contact from the
active. phone book entries transferred to the naviga-
# If you touch , the entered number is de- tion system.
leted one digit at a time from the end of the num- p Before using this function, you need to
ber. Press and hold to delete all digits.
4 Touch [OK] to make a call. transfer the phone book entries stored in
your mobile phone to the navigation sys-
p To cancel the call after the system starts tem.
dialling, touch [Cancel] or . = For details, refer to Transferring the phone
book on page 65.
5 Touch to end the call.
Searching for a contact to call on the
alphabet tabs
1 Display the “Phone” screen.
= For details, refer to Displaying the phone
menu on page 61.
2 Touch [Contacts List].
The “Contacts List” screen appears.
3 Touch alphabet tabs.
The call ends. The screen jumps to the top of the page dis-
p You may hear a noise when you hang up playing the entries that start with the selected
the phone. letter or number.
# If you touch , the operation menu is mini- p Touching the alphabet tabs displays all en-
mised during the call. tries that start with symbols.
To display the menu again, touch .
p Touching [Num] displays all entries that
start with numbers.
p Touching [Oth.] displays the page including
entries that are not assigned to any of the
other tabs.
# If you touch [Sort], the names can be sorted.
Each touch of [Sort] changes the settings as fol-
lows:
! First (default):
62 Engb
Using hands-free phoning Chapter
10
Switches the contact entries to first/last 5 Touch the desired name on the list. Using hands-free phoning
name display and sorts the entries by order
of first name. 6 Touch the desired entry on the list to
! Last: make a call.
Switches the contact entries to last/first A call confirmation message appears.
name display and sorts the entries by order
of last name. 7 Touch [Yes].
p Depending on the type of mobile phone, the Dialling starts.
settings may not be available.
p To cancel the call after the system starts
4 Touch the desired name on the list. dialling, touch [Cancel] or .
5 Touch the desired entry on the list to 8 Touch to end the call.
make a call.
A call confirmation message appears. Dialling from the history
6 Touch [Yes]. The most recent calls made (dialled), received
Dialling starts. and missed are stored in the call history list.
You can browse the call history list and call
p To cancel the call after the system starts numbers from it.
dialling, touch [Cancel] or . p Each call history saves 30 calls per regis-
7 Touch to end the call. tered mobile phone. If the number of calls
exceeds 30, the oldest entry will be deleted.
Calling a number by searching by name
You can search by the names registered in the 1 Display the “Phone” screen.
“Contacts List” screen. = For details, refer to Displaying the phone
menu on page 61.
1 Display the “Phone” screen.
= For details, refer to Displaying the phone 2 Touch [Call history].
menu on page 61.
3 Touch [Received], [Dialed] or [Missed].
2 Touch [Contacts List]. The selected call history list appears.
The “Contacts List” screen appears.
4 Touch an entry on the list.
3 Touch [Search].
4 Enter the desired name and then touch
[OK].
The “Contacts Name Search Results” screen A call confirmation message appears.
appears.
5 Touch [Yes].
Dialling starts.
p To cancel the call after the system starts
dialling, touch [Cancel] or .
6 Touch to end the call.
Engb 63
Chapter
10 Using hands-free phoning
Redialling a call 2 Touch next to the POI that you want
to call.
You can call again to the number that was The “Details” screen appears.
sent last.
3 Touch to make a call.
1 Display the “Phone” screen.
= For details, refer to Displaying the phone Dialling starts.
menu on page 61.
p To cancel the call after the system starts
2 Touch [Redial].
A call confirmation message is displayed. dialling, touch [Cancel] or .
3 Touch [Yes]. 4 Touch to end the call.
Dialling starts.
Dialling a favourite location
You can make a call to an entry stored in the
“Private” list.
1 Display the “Destination” screen.
= For details of the operations, refer to How to
use the navigation menu screens on page
22.
2 Touch [Private].
3 Touch next to the location that you
want to make a call.
The “Details” screen appears.
4 Touch to make a call.
Dialling starts.
p To cancel the call after the system starts
dialling, touch [Cancel] or .
5 Touch to end the call.
Dialling a facility’s phone number
You can make a call to facilities with phone
number data.
p You cannot make a call to locations or POIs
that have no phone number data.
1 Search for the POI.
The “POI List” screen appears.
= For details of the operations, refer to Search-
ing for Points of Interest (POI) on page 39.
64 Engb
Using hands-free phoning Chapter
10
Receiving a phone call 2 Touch to end the call.
You can perform hands-free answering by
using the navigation system.
Answering an incoming call
The system informs you that it is receiving a
call by displaying a message and producing a
ring sound.
p You can set the system to automatically an- The call ends. Using hands-free phoning
swer incoming calls. If not set to automati- p You may hear a noise when you hang up
cally answer incoming calls, you will have the phone.
to answer the calls manually.
= For details, refer to Answering a call # If you touch or , you can turn on or off
automatically on page 68. the hands-free function. Turn this off if you want
to talk on the mobile phone.
p If the voice on the other end of the call is # If you touch , you can dial during a call.
too quiet to hear, you can adjust the volume # If you touch [–] or [+], you can adjust the vo-
of the received voice. lume when talking.
= For details, refer to Setting the Volume # If you touch , the operation menu is mini-
for Guidance and Phone on page 127. mised during the call.
To display the menu again, touch .
p The registered name appears if the phone
number of the received call is already regis- Transferring the phone book
tered in “Contacts List”.
You can transfer the phone book entries from
p Depending on the caller ID service, the your mobile phone to the phone book of the
phone number of the received call may not navigation system.
be displayed. “Call from unknown caller.” p Depending on the mobile phone, the
appears instead.
phone book may be called Contacts, Busi-
1 To answer an incoming call, touch . ness Card or something else.
p With some mobile phones, it may not be
The operation menu during a call appears. possible to transfer the entire phone book
collectively. In this case, transfer addresses
# If you touch , the incoming call is re- one at a time from your phone book using
your mobile phone.
jected.
The rejected call is recorded in the missed call
history list.
= For details, refer to Dialling from the history
on page 63.
Engb 65
Chapter
10 Using hands-free phoning
p If you connect a mobile phone featuring an mobile phone, it will be transferred
auto-synchronisation function, the phone anew.
book transfer or synchronisation will be ! Additional:
automatically performed. If the telephone number is added to the
mobile phone, it will be transferred
p A maximum of 1 000 entries can be trans- anew.
ferred per mobile phone. If the entries ex- When data transfer is finished, a message ask-
ceed 1 000, the extra entries will not be ing whether you want to transfer more data
transferred. appears.
p Each entry can hold up to 5 phone num- 5 Touch [No].
bers.
If more than one number is registered for The transferred data is imported to the naviga-
one person, such as work place and home, tion system.
each number may be counted separately. When the data has been successfully im-
ported, an import complete message is dis-
p Depending on the mobile phone that is played and the “Contacts List” screen
connected to this navigation system via appears.
Bluetooth technology, this navigation sys-
tem may not be able to display the phone p It may take time depending on how many
book correctly. (Some characters may be entries are transferred.
garbled.)
# Touch [Yes] to continue the transfer.
p If the phone book in the mobile phone con-
tains image data, the phone book may not Deleting registered contacts
be correctly transferred.
1 Touch [Edit/Delete] on the “Phone”
p The transferred data cannot be edited on screen.
the navigation system. The “Edit/Delete” screen appears.
p Depending on the mobile phone, phone = For details, refer to Displaying the phone
book transfer may not be available. menu on page 61.
1 Connect the mobile phone that has the 2 Touch [Contacts].
phone book to transfer. The “Contacts List” screen appears.
= For details, refer to Connecting a registered 3 Touch [Delete].
Bluetooth device manually on page 59. The “Delete” screen appears.
2 Touch [Edit/Delete] on the “Phone”
screen.
The “Edit/Delete” screen appears.
= For details, refer to Displaying the phone
menu on page 61.
3 Touch [Contacts].
The “Contacts List” screen appears.
4 Touch [Import].
p If some data has been already retrieved, se-
lect either [Overwrite] or [Additional].
! Overwrite:
The existing date is overwritten, and if
the telephone number is added to the
66 Engb
Using hands-free phoning Chapter
10
4 Touch the entry you want to delete. Clears the dialled call history list. Using hands-free phoning
! Delete received calls:
A tick mark appears next to the entry.
# If you touch [All], you can select all entries. If Clears the received call history list.
you want to deselect all entries, touch [None]. ! Delete missed calls:
5 Touch [Delete].
A message confirming whether to delete the Clears the missed call history list.
entry appears.
6 Touch [Yes]. 3 Touch the history information you
The entry is deleted. want to delete.
# If you touch [No], the deletion is cancelled. The selected history information is tick marked
and you can continue to select the history in-
Deleting the history information formation.
# Touching [All] selects all history information.
You can clear the memory of each item that Touching [None] deselects all selected history in-
corresponds to the connected mobile phone: formation.
the outgoing call history, incoming call history
or missed call history information. 4 Touch [Delete].
1 Touch [Edit/Delete] on the “Phone” A confirmation message appears.
screen.
The “Edit/Delete” screen appears. 5 Touch [Yes].
Data on the selected item is cleared from this
= For details, refer to Displaying the phone navigation system’s memory.
menu on page 61. # If you do not want to clear the memory that
you have selected, touch [No].
2 Touch the history item you want to de-
lete. Changing the phone settings
Editing the device name
You can change the device name to be dis-
played on your mobile phone. (Default is
“PIONEER NAVI”.)
1 Display the “Phone” screen.
= For details, refer to Displaying the phone
menu on page 61.
2 Touch [Bluetooth Settings].
The “Bluetooth Settings” screen appears.
3 Touch [Device Name].
The keyboard to enter the name appears.
On this screen, you can select the following
items:
! Delete dialed calls:
Engb 67
Chapter
10 Using hands-free phoning
4 Touch to delete the current name, not use the Bluetooth wireless technology, we
and enter the new name using the key- recommend selecting “Off”.
board.
1 Display the “Phone” screen.
p Up to 16 characters can be entered for a de- = For details, refer to Displaying the phone
vice name. menu on page 61.
5 Touch [OK]. 2 Touch [Bluetooth Settings].
The name is changed. The “Bluetooth Settings” screen appears.
3 Touch [Bluetooth On/Off].
Each touch of [Bluetooth On/Off] changes
the settings as follows:
! On (default):
Turns on the Bluetooth function.
! Off:
Turns off the Bluetooth function.
Editing the password Answering a call automatically
You can change the password to be used for The navigation system automatically answers
authentication on your mobile phone. (Default incoming calls to the mobile phone, so you
is “1111”.) can answer calls while driving without taking
p Four to eight characters can be entered for your hands off the steering wheel.
a password. 1 Display the “Phone” screen.
= For details, refer to Displaying the phone
1 Display the “Phone” screen. menu on page 61.
= For details, refer to Displaying the phone
menu on page 61. 2 Touch [Incoming call settings.].
The “Incoming call settings.” screen appears.
2 Touch [Bluetooth Settings].
The “Bluetooth Settings” screen appears. 3 Touch [Auto Answer Preference].
The “Auto Answer Preference” screen ap-
3 Touch [Password]. pears.
The password setting screen appears.
4 Touch the desired option.
4 Touch to delete the current pass-
word, and enter the new password using
the keyboard.
5 Touch [OK].
The password is changed.
Stopping Bluetooth wave On this screen, you can select the following
transmission items:
You can stop transmission of electric waves by ! Off (default):
turning off the Bluetooth function. If you do
68 Engb
Using hands-free phoning Chapter
10
No automatic response. Respond manually. and receiving voice and data via Bluetooth Using hands-free phoning
! Immediately: technology. However, the actual transmis-
sion distance may be shorter than the esti-
Answers immediately. mated distance, depending on the usage
! After 3 seconds: environment.
! With some mobile phones, the ring sound
Answers after three seconds. may not be output from the speakers.
! After 6 seconds: ! If private mode is selected on the mobile
phone, hands-free phoning may be dis-
Answers after six seconds. abled.
! After 10 seconds:
Registration and connection
Answers after ten seconds. ! Mobile phone operations vary depending
Setting the automatic rejection on the type of mobile phone. Refer to the
function instruction manual that came with your
mobile phone for detailed instructions.
If this function is on, the navigation system ! With mobile phones, phone book transfer
automatically rejects all incoming calls. may not work even though your phone is
paired with the navigation system. In that
1 Display the “Phone” screen. case, disconnect your phone, perform pair-
= For details, refer to Displaying the phone ing again from your phone to the naviga-
menu on page 61. tion system, and then perform the phone
book transfer.
2 Touch [Incoming call settings.].
The “Incoming call settings.” screen appears. Making and receiving calls
! You may hear a noise in the following situa-
3 Touch [Refuse All Calls].
Each touch of [Refuse All Calls] changes the tions:
settings as follows: — When you answer the phone using the
! Off (default): button on the phone.
Accepts all incoming calls. — When the person on the other end of
! On: line hangs up the phone.
Rejects all incoming calls. ! If the person on the other end of the phone
p If both “Refuse All Calls” and “Auto An- call cannot hear the conversation due to an
swer Preference” are activated, “Refuse echo, decrease the volume level for hands-
All Calls” takes priority and all incoming free phoning. This may reduce the echo.
calls are automatically rejected. ! With some mobile phones, even if you
press the accept button on the mobile
p If “Refuse All Calls” is set to “On”, rejected phone when a call comes in, hands-free
incoming calls will not be stored in the phoning may not be performed.
missed call list. ! The registered name appears if the phone
number of the received call is already regis-
Notes for hands-free phoning tered in the phone book. When one phone
number is registered under different
General notes names, the name that comes first in the
! Connection to all mobile phones featuring phone book is displayed.
Bluetooth wireless technology is not guar-
anteed.
! The line-of-sight distance between this na-
vigation system and your mobile phone
must be 10 metres or less when sending
Engb 69
Chapter
10 Using hands-free phoning
! If the phone number of the received call is
not registered in the phone book, the
phone number of the received call appears.
The received call and the dialled
number histories
! You cannot make a call to the entry of an
unknown user (no phone number) in the re-
ceived call history.
! If calls are made by operating your mobile
phone, no history data will be recorded in
the navigation system.
Phone book transfers
! If there are more than 1 000 phone book en-
tries on your mobile phone, not all entries
may download completely.
! With some mobile phones, it may not be
possible to transfer all items in the phone
book at one time. In this case, transfer
items one by one from your mobile phone.
! Depending on the mobile phone, this navi-
gation system may not display the phone
book correctly. (Some characters may be
garbled, or first and last names may be re-
versed.)
! If the phone book in the mobile phone con-
tains image data, the phone book may not
be transferred correctly. (Image data can-
not be transferred from the mobile phone.)
! Depending on the mobile phone, phone
book transfer may not be available.
70 Engb
Basic operations of the AV source Chapter
11
This chapter describes the basic operations of % Touch the source icon you want to se- Basic operations of the AV source
the AV source. lect on the left edge of the screen.
The operation screen of the selected source
You can play or use the following sources with appears.
your Pioneer navigation system.
! Radio (FM, MW/LW) p If seven or more sources can be selected,
! CD appears.
! ROM (in MP3, AAC, WMA)
! DVD-Video p If you touch , the AV source icons will
! DivX be switched and hidden icons will ap-
! SD pear.
The following sources can be played back or
used by connecting an auxiliary device. Turning off the AV source
! Digital Radio (DAB) (*1)
! USB Turn off the AV source to stop playing or re-
! iPod ceiving the AV source.
! Aha Radio
! Bluetooth audio % Touch [Off] on the left edge of the
! AV input 1 (AV1) screen.
! AV input 2 (AV2) The AV source is turned off.
p (*1) A source only available on AVIC-
AV source plate display
F950DAB.
If you select a station or song with the track
Displaying the AV up/down button while the map screen is still
operation screen displayed, the AV source plate appears on the
top of the map screen. The AV source plate
% Press the MODE button when the map displays the status of the currently played AV
screen is displayed. source. The AV source plate disappears if it is
not operated for about four seconds after it ap-
p The AV operation screen can also be dis- pears.
played by touching [AV Source] on the
“Top Menu”. AV source plate
Selecting a source
Source icons
Engb 71
Chapter
12 Using the radio
You can listen to the radio using the naviga- 2 Programme service name indicator
tion system. This section describes operations Shows the programme service name (station
for radio. name) of the current station.
p When “AM” is selected, this indicator is
The functions related to RDS (Radio Data Sys- not shown.
tem) are only available in areas with FM sta-
tions broadcasting RDS signals. Even if the 3 PTY indicator
navigation system is receiving an RDS station, Shows the programme type of the current sta-
not all the functions related to RDS will be tion (when available).
available. p When “AM” is selected, this indicator is
not shown.
Starting procedure
4 Current time
1 Display the AV operation screen. 5 Band indicator
= For details of the operations, refer to Dis-
playing the AV operation screen on page 71. Shows which band the radio is tuned to: FM1,
FM2, FM3 or AM.
2 Touch [Radio] on the left edge of the 6 TEXT indicator
screen to display the “Radio” screen. Shows when radio text is received.
7 TRFC indicator
3 Touch the band indicator to switch a Shows the status of traffic announcements.
band. 8 NEWS indicator
Shows the status of news programmes.
= For details, refer to Using the touch panel 9 Preset number indicator
keys on page 73. Shows the selected preset item.
a Frequency indicator
4 Use the touch panel keys on the screen b Signal level indicator
to control the radio. c STEREO indicator
Shows that the frequency selected is being
= For details, refer to Using the touch panel broadcast in stereo.
keys on page 73. p When “AM” is selected, this indicator is
Reading the screen not shown.
d Radio text display area
Displays the radio text currently received.
p When “AM” is selected, this indicator is
not shown.
23 4 5 6
1 7
8
d
cb a 9
1 Source icon
Shows which source has been selected.
72 Engb
Using the radio Chapter
12
Using the touch panel keys The tuner will scan frequencies until it finds a Using the radio
broadcast strong enough for good reception.
1 23 p You can cancel seek tuning by touching
4 either or briefly.
9 p If you keep holding or , you can
8 76 5 skip broadcasting frequencies. Seek
tuning will start when you release the
1 Selects a band keys.
Touch the left part to select a FM band (FM1, 9 Displays preset channels
FM2 or FM3). Touch the right part to switch to Touching this key displays the preset channel
the AM band. list.
p When “AM” is selected, you cannot Touch the item of the list (“1” to “6”) to switch
switch to another AM band by touching to a channel registered as a preset channel.
the band key. p If you touch the preset channel list dis-
play key while the preset channel list is
2 Recalls equaliser curves displayed, the list disappears and preset
= For details, refer to Using the equaliser tuning keys are displayed.
on page 142.
Preset channel list display key
3 Displays the “Function” menu
= For details, refer to Using advanced func- Preset tuning keys
tions on page 75.
! Once you have stored broadcast chan-
4 Operates some functions by swipe action nels, you can easily recall preset chan-
= For details, refer to Swipe action on page nels from memory with a single touch of
25. a key.
= For details, refer to Storing broadcast
5 Displays the “Phone” screen frequencies on page 73.
= For details, refer to Displaying the phone
menu on page 61. Storing broadcast frequencies
6 Displays the radio text screen With a touch of any of the preset tuning keys
Displays the radio text currently received. (“1” to “6”), you can easily store up to six
p When “AM” is selected, this indicator is broadcast frequencies for later recall (also
not shown. with the touch of a key).
= For details, refer to Using radio text on
page 74. 1 Select a frequency that you want to
store in memory.
7 Stores the strongest broadcast frequen-
cies 2 Display the preset channel list.
= For details, refer to Storing the strongest = For details, refer to Displays preset chan-
broadcast frequencies on page 74. nels on page 73.
8 Performs manual tuning
To tune manually, touch or briefly. The
frequencies move up or down one step at a
time.
Performs seek tuning
To perform seek tuning, touch and hold or
for about one second and then release.
Engb 73
Chapter
12 Using the radio
3 Keep touching a preset tuning key [1] Viewing the three latest radio text
to [6]. You can display the currently received radio
The selected radio station has been stored in text and the three most recent radio text trans-
memory. missions.
The next time you touch the same preset tun- 1 Display the radio text screen.
ing key “1” to “6”, the radio station frequencies
are recalled from memory. = For details, refer to Displays the radio text
screen on page 73.
p Up to 18 FM stations, six for each of the
three FM bands, as well as six MW/LW sta- 2 Press the TRK button.
tions, can be stored in memory. Pressing the button switches the text contents
from the current radio text to the most recent
Storing the strongest broadcast three radio text transmissions.
frequencies
p If there is no radio text data in memory, the
BSM (best stations memory) lets you automa- display will not change.
tically store the six strongest broadcast fre-
quencies under the preset tuning keys “1” to Storing and recalling radio text
“6” and, once stored there, you can tune into You can store data from up to six radio text
them with the touch of a key. transmissions in the touch panel keys “1” to
p Storing broadcast frequencies with BSM “6”.
1 Display the radio text you want to
may replace broadcast frequencies you store in memory.
have already saved.
= For details, refer to Viewing the three latest
% Touch [BSM] to begin a search. radio text on page 74.
A message appears. While the message is dis-
playing, the six strongest broadcast frequen- 2 Touch and hold any of the keys [1] to
cies will be stored under the preset tuning [6] to store the displayed radio text.
keys “1” to “6” in order of their signal strength. The selected radio text is stored in memory.
When this is complete, the message disap- The next time you press the same keys in the
pears. radio text display, the stored text will be re-
# If you touch [Cancel], the storage process is called from memory.
cancelled.
p If the radio text data is already stored under
Using radio text all keys, the new text will overwrite the exist-
ing one.
p This function can only be used on the FM
band.
This tuner can display radio text data trans-
mitted by RDS stations, such as station infor-
mation, the title of the currently broadcast
song and the name of the artist.
p The tuner automatically memorises the
three latest radio text broadcasts received,
replacing text from the least recent recep-
tion with new text when it is received.
p When no radio text is received, “No Text” is
displayed.
74 Engb
Using the radio Chapter
12
Using advanced functions p The preset number may disappear on the Using the radio
display if the tuner tunes into a regional sta-
Tuning in strong frequencies tion that differs from the originally set sta-
tion.
Local seek tuning allows you to only tune into
those radio stations with sufficiently strong p The regional function can be turned on or
signals for good reception. off independently for each FM band.
1 Touch on the “Radio” screen. Searching for an RDS station by
The “Function” menu appears. PTY information
2 Touch [Local]. p This function can only be used on the FM
band.
3 Touch [On] to turn local seek tuning on.
# If you touch [Off], local seek tuning is turned You can search for general types of broadcast-
off. ing programmes.
4 Touch or to set the sensitivity. 1 Touch on the “Radio” screen.
There are four levels of sensitivity for FM and The “Function” menu appears.
two levels for MW/LW:
FM: 1 — 2 — 3 — 4 2 Touch [PTY].
MW/LW: 1 — 2
3 Touch or to select a programme
p The FM “4” (MW/LW “2”) setting allows re- type.
ception of only the strongest stations, while There are four programme types:
lower settings let you receive weaker sta- NEWS&INF — Popular — Classics — Others
tions.
4 Touch [Start] to begin a search.
Limiting stations to regional The tuner searches for a station broadcasting
programming that programme type.
# If you touch [Stop], the search is cancelled.
p This function can only be used on the FM
band. p The programmes of some stations may dif-
fer from that indicated by the transmitted
When AF (alternative frequency) is used to PTY.
automatically retune frequencies, the regional
function limits the selection to stations broad- p If no station is broadcasting the type of pro-
casting regional programmes. gramme you searched for, “Not Found” is
displayed for about two seconds and then
1 Touch on the “Radio” screen. the tuner returns to the original station.
The “Function” menu appears.
Receiving traffic announcements
2 Touch [Regional].
p This function can only be used on the FM
3 Touch [On] or [Off]. band.
! On (default):
Turns the Regional function on. TA (traffic announcement standby) lets you re-
! Off: ceive traffic announcements automatically, no
Turns the Regional function off. matter what source you are listening to. TA
p Regional programming and regional net- can be activated for both a TP station (a sta-
works are organised differently depending tion that broadcasts traffic information) or an-
on the country (i.e. they may change ac- other enhanced network’s TP station (a station
cording to the time, country or broadcast carrying information that cross-references TP
area). stations).
Engb 75
Chapter
12 Using the radio
1 Tune into a TP station or another en- Turns the News function on.
hanced network’s TP station. p A news programme can be cancelled by
2 Touch [TA]. touching [Cancel].
p You can also cancel the news programme
3 Touch [On].
p To turn traffic announcements standby off, by changing the source or band.
touch [TA] again.
Tuning into alternative frequencies
4 Use the VOL (+/–) button to adjust the
TA volume when a traffic announcement p This function can only be used on the FM
begins. band.
The newly set volume is stored in memory and
recalled for subsequent traffic announce- If you are listening to a broadcast and the re-
ments. ception becomes weak or there are other pro-
blems, the navigation system will
5 Touch [Cancel] while a traffic announce- automatically search for a different station in
ment is being received to cancel the an- the same network that is broadcasting a stron-
nouncement. ger signal.
The tuner returns to the original source but re-
mains in standby mode until [TA] is touched 1 Touch on the “Radio” screen.
again. The “Function” menu appears.
You can also cancel the announcement by
changing the source or band. 2 Touch [AF].
p The system switches back to the original 3 Touch [On] or [Off].
source following traffic announcement re- ! On (default):
ception. Turns the AF function on.
! Off:
p Only TP stations and other enhanced net- Turns the AF function off.
works’ TP stations are tuned in during seek p Only RDS stations are tuned in during seek
tuning or BSM when the TA function is on. tuning or BSM when AF is on.
p When you recall a preset station, the tuner
Using news programme may update the preset station with a new
interruption frequency from the station’s AF list. No pre-
set number appears on the display if the
p This function can only be used on the FM RDS data for the station received differs
band. from that for the originally stored station.
p Sound may be temporarily interrupted by
When a news programme is broadcast from a another programme during an AF fre-
PTY code news station, the navigation system quency search.
can switch from any station to the news broad- p AF can be turned on or off independently
cast station. When the news programme for each FM band.
ends, reception of the previous programme re-
sumes.
1 Touch on the “Radio” screen.
The “Function” menu appears.
2 Touch [News].
3 Touch [On] or [Off].
! Off (default):
Turns the News function off.
! On
76 Engb
Using the radio Chapter
12
PI Seek operation NEWS indicator
If the unit fails to find a suitable alternative fre- Indicator Meaning
quency, or if you are listening to a broadcast
and the reception becomes weak, the naviga- Information interruption is activated,
tion system will automatically search for a dif- but you will not receive data since there
ferent station with the same programming. is none.
During the search, “PI Seek” is displayed and
the output is muted. Muting is discontinued Information interruption is activated,
after completion of the PI Seek, whether or not and data currently being received.
a different station is found.
(No dis- Information interruption is deactivated.
Activating the Auto PI seek for play)
preset stations
Switching the sound quality of
When preset stations cannot be recalled, as the FM tuner
when travelling long distances, the unit can
be set to perform PI Seek during preset recall. p This function can only be used on the FM
p The default setting for Auto PI Seek is off. band.
= For details, refer to Switching Auto PI seek
You can select the sound quality from the
on page 141. three settings according to the circumstances
of use.
Interruption icon status Using the radio
1 Touch on the “Radio” screen.
p This function can only be used on the FM The “Function” menu appears.
band.
2 Touch [Tuner Sound].
When the information interruption setting is The “Tuner Sound” menu appears.
enabled, the interruption icon is displayed.
The interruption icon display may change de- 3 Touch the item you want to set.
pending on the programme reception status. ! Stable:
= For details of the operation, refer to Receiv- Switch to settings that prioritise noise pre-
vention.
ing traffic announcements on page 75. ! Standard:
= For details of the operations, refer to Using Switch to the standard settings.
! Hi-Fi:
news programme interruption on page 76. Switch to the settings that gave priority to
p The interruption icon is displayed on all AV the sound quality.
source operation screens. Operating by hardware
buttons
TRFC indicator
Pressing the TRK button
Indicator Meaning You can move the preset channels up or down.
Information interruption is activated, Pressing and holding the TRK button
but you will not receive data since there You can perform seek tuning.
is none.
Information interruption is activated,
and data currently being received.
(No dis- Information interruption is deactivated.
play)
Engb 77
Chapter
13 Using the Digital Radio (DAB)
p This function is only available on AVIC- 2 Touch [Digital Radio] on the left edge
F950DAB. of the screen to display the “Digital Radio”
screen.
You can listen to the Digital Audio Broadcast-
ing using the navigation system. This section 3 Use the touch panel keys on the screen
describes operations for Digital Audio Broad- to control the radio.
casting.
= For details, refer to Using the touch panel
To receive DAB signals, connect a DAB aerial keys on page 79.
(AN-DAB1) sold separately to the unit.
Reading the screen
Digital Radio (DAB) features the following:
! High sound quality (nearly as high as for 23 4 5
CDs, although it may be reduced in some 1
cases in order to allow more services to be
broadcast) 6
! Interference-free reception
Some individual services in an ensemble may ba 9 8 7
be further subdivided into Service Compo-
nents. The main Service Component is called 1 Source icon
the Primary Service Component, and any aux- Shows which source has been selected.
iliary Service Components are called Second-
ary Service Components. 2 Current time
3 Service component number
Ensemble 4 Band indicator
Service 1 Primary Service Component Shows which band the radio is tuned to:
DAB1, DAB2 or DAB3.
Service 2 Primary Service Component 5 Current broadcast information
! PTY label
Secondary Service Component ! Ensemble label
! Service label
Secondary Service Component ! Service component label
p “- - - - - - -” is displayed if there is no corre-
Service 3 Primary Service Component
sponding information.
Data 6 Current bit rate
: Primary data Shows the data volume being received broad-
: Secondary data cast.
7 Frequency indicator
Starting procedure 8 Preset number indicator
Shows the selected preset item.
1 Display the AV operation screen. 9 Channel number indicator
= For details of the operations, refer to Dis- a Signal level indicator
playing the AV operation screen on page 71. b FM Link indicator
78 Engb
Using the Digital Radio (DAB) Chapter
13
Appears when the navigation system switches To tune manually, touch or briefly. The Using the Digital Radio (DAB)
to a channel received in good condition auto- frequencies move up or down one step at a
matically from a channel received in bad con- time.
dition. Performs seek tuning
To perform seek tuning, touch and hold or
Using the touch panel keys
for about one second and then release.
1 234 The tuner will scan frequencies until it finds a
broadcast strong enough for good reception.
5 p You can cancel seek tuning by touching
b6
either or briefly.
a 98 7 b Recalls channels from the preset
1 Selects a band Touching this key displays the preset channel
Touch the key repeatedly until the desired list.
band is displayed: DAB1, DAB2, or DAB3. Touch the item of the list (“1” to “6”) to switch
p This function is convenient for preparing to a channel registered as a preset channel.
different preset lists for each band. p If you touch the preset channel list dis-
2 Selects a channel from the list play key while the preset channel list is
= For details, refer to Selecting a channel displayed, the list disappears and preset
from the list on page 80. tuning keys are displayed.
3 Recalls equaliser curves Preset channel list display key
= For details, refer to Using the equaliser
on page 142. Preset tuning keys
4 Displays the “Function” menu ! Once you have stored broadcast chan-
5 Skips the ensemble forward or backward nels, you can easily recall preset chan-
6 Operates some functions by swipe action nels from memory with a single touch of
a key.
= For details, refer to Swipe action on page = For details, refer to Storing broadcast
25. frequencies on page 79.
7 Displays the “Phone” screen Storing broadcast frequencies
= For details, refer to Displaying the phone
menu on page 61. With a touch of any of the preset tuning keys
(“1” to “6”), you can easily store up to six
8 Displays the radio text screen broadcast channels for later recall (also with
To see text informations of programme cur- the touch of a key).
rently being listened to, touch this key.
1 Select a frequency that you want to
9 Listens to recent broadcast store in memory.
To play back broadcast the channel currently
being listened to, touch this key.
= For details, refer to Listening to a recent
broadcast on page 80.
a Performs manual tuning
Engb 79
Chapter
13 Using the Digital Radio (DAB)
2 Display the preset channel list. p If you touch [Update], you can update the
= For details, refer to Using the touch panel channel list.
keys on page 79.
p [ABC] may appear depending on the list. If
3 Keep touching a preset tuning key [1] you touch [ABC], you can search by
to [6]. alphabet.
The selected radio station has been stored in
memory. Listening to a recent broadcast
The next time you touch the same preset tun-
ing key “1” to “6”, the service component is re- You can listen to the service component that
called from memory. has been broadcasted (time shift function).
p Up to 18 stations, six for each of the three % Touch on the “Digital Radio” screen.
bands can be stored in memory. Switches to the time shift function mode.
Selecting a channel from 123
the list
1 Playback and Pause
You can select a channel by searching chan- Touching [d] or [e] switches between play-
nel list. back and pause.
1 Touch on the “Digital Radio” screen. 2 Fast reverse or forward
The list screen appears. Touch [o] and you can perform fast re-
verse the play time for one minute.
2 Touch the category you want. Touch [p] and you can perform fast for-
You can select a channel from the following ward the play time for one minute.
categories.
3 Returns to live broadcast
! Ensemble: p If you switch the band in the time shift func-
You can select a Service Component from
the relevant ensemble. tion mode, the time shift function mode is
cancelled and switches to the current live
! PTY: broadcast.
You can select a Service Component from
PTY information.
p The PTY can be selected are [NEWS&INF],
[Popular], [Classics] or [Others].
! Service Component:
You can select a Service Component from
the list of all components.
3 Touch the item you want.
It changes to the selected channel.
80 Engb
Using the Digital Radio (DAB) ChapterUsing the Digital Radio (DAB)
Using advanced functions 13
Switching to a channel with good Engb 81
receiving sensitivity automatically
If the tuner cannot get good reception, the
unit will automatically search for another en-
semble that supports the same service com-
ponent. If no alternative service component
can be found or reception remains poor, this
function will automatically switch to an identi-
cal FM broadcast.
p After the channel is switched, if the origin-
ally channel regains good receiving sensi-
tivity, the system switches back to the
original channel automatically.
1 Touch on the “Digital Radio” screen.
The “Function” menu appears.
2 Touch [Service follow].
The “Service follow” screen appears.
3 Touch [On].
Automatic channel switching is enabled.
p If you touch [Off], setting for switching the
channel automatically is disabled.
Operating by hardware
buttons
Pressing the TRK button
You can move the preset channels up or down.
Pressing and holding the TRK button
You can perform seek tuning.
Chapter
14 Playing audio CDs
You can play a normal music CD using the Shows the title of the track currently
built-in drive of the navigation system. This playing (when available).
section describes how. ! : Artist name
Shows the artist name of the track cur-
Starting procedure rently playing (when available).
! : Album title
1 Display the AV operation screen. Shows the title of the album of the cur-
= For details of the operations, refer to Dis- rent track (when available).
playing the AV operation screen on page 71. ! Play time
Shows the elapsed playing time within
2 Insert the disc you want to play into the current track.
the disc-loading slot. p “- - - - - - -” is displayed if there is no corre-
Playback starts from the first track of the CD. sponding information.
5 Playback condition indicator
= For details, refer to Inserting and ejecting a Indicates the current playback condition.
disc on page 15.
Playing tracks in random order
p If the disc is already set, touch [Disc] on the
left edge of the screen. Indicator Meaning
= For details, refer to Selecting a source on Does not play tracks in random
page 71. order.
3 Use the touch panel keys on the screen Plays all tracks in the current disc in
to control the disc. random order.
= For details, refer to Using the touch panel Setting a repeat play range
keys on page 82.
Indicator Meaning
Reading the screen
Repeats the current disc.
23 4
Repeats just the current track.
1
5 Using the touch panel keys
1 Source icon 12
Shows which source has been selected.
3
2 Track number indicator 4
Shows the number of the track currently play- 7 65
ing.
3 Current time
4 Current track information
! : Track title
82 Engb
Playing audio CDs Chapter
14
1 Selects a track from the list Operating by hardware Playing audio CDs
Touching the key displays a list which lets you buttons
see the track titles on a disc. You can play a
track on the list by touching it. Pressing the TRK button
You can skip tracks forward or backward.
Pressing and holding the TRK button
You can perform fast reverse or fast for-
ward.
p “- - - - - - -” is displayed if there is no corre-
sponding information.
2 Recalls equaliser curves
= For details, refer to Using the equaliser
on page 142.
3 Operates some functions by swipe action
= For details, refer to Swipe action on page
25.
4 Sets a repeat play range
The repeat play range can be changed by only
touching a single key.
p If you perform track search or fast for-
ward or reverse, track repeat playback is
automatically cancelled.
= For details, refer to Playback condition
indicator on page 82.
5 Displays the “Phone” screen
= For details, refer to Displaying the phone
menu on page 61.
6 Plays tracks in random order
All tracks in the disc can be played at random
by only touching a single key.
p If you turn the random play on when the
repeat play range is set to , the repeat
play range changes to automatically.
= For details, refer to Playback condition
indicator on page 82.
7 Playback and Pause
Touching [d] or [e] switches between play-
back and pause.
Engb 83
Chapter
15 Playing music files on ROM
You can play a disc that contains compressed 3 Current time
audio files using the built-in drive of the navi- 4 File type indicator
gation system. This section describes these
operations. Shows the type of audio files.
p In the following description, the MP3, 5 Current file information
WMA, AAC files are collectively referred to ! : Track title
as “Compressed audio files”. Shows the title of the track currently
playing (when available).
Starting procedure p If the title of a track is not available,
the file name appears.
1 Display the AV operation screen.
= For details of the operations, refer to Dis- ! : Artist name
playing the AV operation screen on page 71. Shows the artist name currently playing
(when available).
2 Insert the disc you want to play into
the disc-loading slot. ! : Folder name/Album title
Playback starts from the first file of the ROM. Shows the title of the album of the cur-
rent file when MP3 or AAC data have in-
= For details, refer to Inserting and ejecting a formation. Otherwise, shows the folder
disc on page 15. name currently paying.
p If the disc is already set, touch [Disc] on the ! Play time
left edge of the screen. Shows the elapsed playing time within
the current file.
= For details, refer to Selecting a source on
page 71. p “- - - - - - -” is displayed if there is no corre-
sponding information.
3 Use the touch panel keys on the screen
to control the disc. 6 Playback condition indicator
Indicates the current playback condition.
= For details concerning operations, refer to
Using the touch panel keys on page 85. Playing files in random order
Reading the screen Indicator Meaning
2 3 45 Does not play files in random order.
1 Plays all audio files in the current re-
peat play range in random order.
Setting a repeat play range
Indicator Meaning
Repeats all compressed audio files.
6 Repeats just the current file.
Repeats the current folder.
1 Source icon
Shows which source has been selected.
2 Track number indicator
Shows the number of the track currently play-
ing.
84 Engb
Playing music files on ROM Chapter
15
Using the touch panel keys = For details, refer to Displaying the phone Playing music files on ROM
menu on page 61.
12
6 Plays files in random order
3 The files in the current repeat play range can
be played at random by only touching a single
4 key.
p If you turn the random play on when the
7 65 repeat play range is set to , the repeat
play range changes to automati-
1 Selects a file from the list cally.
Touching the key displays a list which lets you = For details, refer to Playback condition
see the track titles or folder names on a disc. indicator on page 84.
p If the title of a track is not available, the
file name appears. 7 Playback and Pause
Touching a folder on the list shows its content. Touching [d] or [e] switches between play-
You can play a file on the list by touching it. back and pause.
Operating by hardware
buttons
Pressing the TRK button
You can skip files forward or backward.
Pressing and holding the TRK button
You can perform fast reverse or fast for-
ward.
2 Recalls equaliser curves
= For details, refer to Using the equaliser
on page 142.
3 Operates some functions by swipe action
= For details, refer to Swipe action on page
25.
4 Sets a repeat play range
The repeat play range can be changed by only
touching a single key.
p If you select another folder during re-
peat play, the repeat play range changes
to .
p If you perform fast reverse or fast for-
ward during , the repeat play range
changes to .
p When is selected, it is not possible
to playback a subfolder of that folder.
= For details, refer to Playback condition
indicator on page 84.
5 Displays the “Phone” screen
Engb 85
Chapter
16 Playing a DVD-Video
You can play a DVD-Video using the built-in Shows which digital sound format (surround
drive of the navigation system. This section de- sound format) has been selected.
scribes operations for playing a DVD-Video. 7 Audio channel indicator
Shows the current audio channel type, such
Starting procedure as “Mch” (Multi-channel).
8 Repeat range indicator
1 Display the AV operation screen. Shows which repeat range has been selected.
= For details of the operations, refer to Dis- Setting a repeat play range
playing the AV operation screen on page 71. Indicator Meaning
2 Insert the disc you want to play into Plays the whole of the current disc.
the disc-loading slot.
The source changes and then playback will Repeats just the current chapter.
start.
Repeats just the current title.
= For details, refer to Inserting and ejecting a
disc on page 15. Using the touch panel keys
p If the disc is already set, touch [Disc] on the Playback screen (page 1)
left edge of the screen.
12 3
= For details, refer to Selecting a source on
page 71. 4
3 Use the touch panel keys on the screen
to control the disc.
= For details, refer to Using the touch panel
keys on page 86.
Reading the screen
2 34 5
15
6 d cba 9 87 6
7
8
Playback screen (page 2)
1 Source icon 4
Shows which source has been selected.
ef ghi j
2 Current time p With some discs, the icon 9 may be dis-
3 Title number indicator
played, meaning that the operation is inva-
Shows the title number currently playing. lid.
4 Chapter number indicator
Shows the chapter number currently playing.
5 Play time indicator
Shows the elapsed playing time within the
current title.
6 Digital sound format indicator
86 Engb
Playing a DVD-Video Chapter
16
1 Searches for a desired scene and starts menu. For details, refer to the instructions pro- Playing a DVD-Video
playback from a specified time vided with the disc.
= For details, refer to Searching for a speci- a Frame-by-frame playback (or slow-motion
fic scene and starting playback from a playback)
specified time on page 88. = For details, refer to Frame-by-frame play-
2 Recalls equaliser curves
= For details, refer to Using the equaliser back on page 89.
on page 142. = For details, refer to Slow motion playback
3 Hides the touch panel keys and informa-
on page 89.
tion of the current video b Stops playback
c Playback and Pause
Touching shows only the current video.
p If you want to display the touch panel Touching [d] or [e] switches between play-
back and pause.
keys and information of the current d Switches to the next page of touch panel
video again, touch anywhere on the LCD
screen. keys
4 Operates some functions by swipe action e Resumes playback (Bookmark)
p When the video is displayed in full
screen mode, the whole screen be- = For details, refer to Resuming playback
comes a swipe response area. (Bookmark) on page 88.
= For details, refer to Swipe action on page
25. f Changing the wide screen mode
5 Sets a repeat play range = For details, refer to Changing the wide
screen mode on page 89.
The repeat play range can be changed by only
g Switches the audio language
touching a single key.
p If you perform chapter (title) search, fast You can switch the audio language while the
forward, fast reverse or slow motion disc is playing when a disc has multilingual
playback, the repeat play range changes
to . data (multi-audio).
p This function is not available when disc p Each time you touch this key changes
playback has been stopped.
= For details, refer to Repeat range indi- the audio language.
cator on page 86. = For details, refer to Setting the top-prior-
6 Displays the “Phone” screen
= For details, refer to Displaying the phone ity languages on page 95.
menu on page 61. h Switches the subtitle language
7 Displays the DVD menu keypad
= For details, refer to Using the DVD menu You can switch the subtitle language while the
by touch panel keys on page 89.
8 Performs an operation (such as resuming) disc is playing when a disc has multilingual
that is stored on the disc data (multi-subtitle).
p Each time you touch this key changes
When using a DVD that has a point recorded
the subtitle language.
that indicates where to return to, the DVD re- = For details, refer to Setting the top-prior-
turns to the specified point and begins play- ity languages on page 95.
i Selects audio output
back from there.
9 Displays the DVD menu When playing DVDs recorded with LPCM
You can display the menu by touching [Menu] audio, you can switch the audio output. Touch
or [Top Menu] while a disc is playing. Touch-
ing either of these keys again lets you start repeatedly until the desired audio output
playback from the location selected from the appears on the display.
Each touch of changes the settings as fol-
lows:
! L+R: Left and right
! L: Left
! R: Right
! Mix: Mixing left and right
p This function is not available when disc
playback has been stopped.
Engb 87
Chapter
16 Playing a DVD-Video
p The appearance of this key changes ac- 2 Touch the keys to input the target num-
cording to the current setting. ber or time and then touch [Enter].
j Changes the viewing angle (Multi-angle) For titles, chapters
Each touch of switches between viewing ! To select 3, touch [3] and [Enter] in order.
angles. ! To select 10, touch [1] and [0] and [Enter] in
p During playback of a scene shot from order.
multiple angles, the angle icon is
displayed. Turn the angle icon display For time (time search)
on or off using the “DVD/DivX® Setup” ! To select 5 minutes 3 seconds, touch [5],
menu. [min], [3], [sec] and [Enter] in order.
p The appearance of this key changes ac- ! To select 71 minutes 00 seconds, touch [7],
cording to the current setting. [1], [min] and [Enter] in order.
= For details, refer to Setting the angle icon ! To select 100 minutes 05 seconds, touch
display on page 95. [1], [0], [0], [5], [sec] and [Enter] in order.
p To cancel an input number, touch .
Resuming playback (Bookmark) To cancel the input numbers, touch and
hold .
The Bookmark function lets you resume play-
back from a selected scene the next time the Direct number search
disc is loaded.
You can use this function when you need to
% Touch on the “DVD-V” screen. enter a numerical command during DVD play-
You can bookmark one point for each of up to back.
five discs. If you try to memorise another point 1 Touch .
for the same disc, the older bookmark will be 2 Touch [10Key].
overwritten by the newer one. 3 Touch [0] to [9] to input the desired
number.
p To clear the bookmark on a disc, touch and 4 While the input number is displayed,
hold . touch [Enter].
Searching for a specific scene Operating the DVD menu
and starting playback from a
specified time You can operate the DVD menu by touching
the menu item on the screen directly.
You can search for the scene you want by spe- p This function can be used when the
cifying a title or chapter, and the time.
p Chapter search and time search are not key is displayed on the upper left corner of
the LCD screen.
available when disc playback has been
stopped.
1 Touch and then touch [Title] (title),
[Chapter] (chapter), [Time] (time).
88 Engb
Playing a DVD-Video Chapter
16
p This function may not work properly with Frame-by-frame playback Playing a DVD-Video
some DVD disc content. In that case, use
touch panel keys to operate the DVD menu. This lets you move ahead one frame at a time
during pause.
p If you touch the screen while is dis-
played, the touch panel keys will not be dis- % Touch [r] during pause.
played. Each time you touch [r], you move ahead
one frame.
1 Touch the screen to display the touch
panel keys. p To return to normal playback, touch [d] or
[e].
2 Touch [Top Menu] or [Menu] to display
the touch panel keys to operate the DVD p With some discs, images may be unclear
menu. during frame-by-frame playback.
3 Touch the desired menu item. Slow motion playback
# If you touch , the touch panel keys for se-
lecting the menu item are displayed. This lets you slow down playback speed.
Using the DVD menu by touch 1 Touch and hold [r] until is dis-
panel keys played during playback.
The icon is displayed, and forward slow
If items on the DVD menu appear, the touch motion playback begins.
panel keys may overlay them. If so, select an
item using those touch panel keys. p To return to normal playback, touch [d] or
[e].
1 Touch , , or to select the de-
sired menu item. 2 Touch [r] to adjust playback speed
during slow motion playback.
Each time you touch [r] it changes the
speed in four steps in the following order:
1/16 d 1/8 d 1/4 d 1/2
p There is no sound during slow motion play-
back.
p With some discs, images may be unclear
during slow motion playback.
p Reversed slow motion playback is not possi-
ble.
p If the touch panel keys for DVD menu selec- Changing the wide screen mode
tion disappear, touch anywhere on the
screen, and then touch . The touch You can set the screen size of video.
panel keys are displayed again. p The default setting is “Full”.
2 Touch [OK]. 1 Touch on the “DVD-V” screen.
Playback starts from the selected menu item. p The appearance of this key changes accord-
The way to display the menu differs depending ing to the current setting.
on the disc.
# If you touch or , the display position of
touch panel keys is changed each time you touch
it.
# If you touch [Hide], the touch panel keys dis-
appear and the icon is displayed. You can se-
lect a menu item by touching it.
Engb 89
Chapter
16 Playing a DVD-Video
2 Touch the desired mode. Operating by hardware
buttons
Pressing the TRK button
You can skip chapters forward or backward.
Pressing and holding the TRK button
You can perform fast reverse or fast for-
ward.
! Full
A 4:3 picture is enlarged in the horizontal
direction only, enabling you to enjoy a 4:3
TV picture (normal picture) without any
omissions.
! Just
The picture is enlarged slightly at the centre
and the amount of enlargement increases
horizontally toward the ends of the picture,
enabling you to enjoy a 4:3 picture without
sensing any disparity, even on a wide
screen.
! Cinema
A picture is enlarged by the same propor-
tion as “Full” or “Zoom” in the horizontal di-
rection and by an intermediate proportion
between “Full” and “Zoom” in the vertical
direction; ideal for a cinema-sized (wide
screen) picture where captions lie outside
the frame.
! Zoom
A 4:3 picture is enlarged in the same pro-
portion both vertically and horizontally;
ideal for a cinema-sized (wide screen) pic-
ture.
! Normal
A 4:3 picture is displayed normally, giving
you no sense of disparity since its propor-
tions are the same as those of the normal
picture.
p Images may be unclear when “Cinema” or
“Zoom” is selected.
p Remember that use of this system for com-
mercial or public viewing purposes may
constitute an infringement on the author’s
rights protected by the Copyright Law.
90 Engb
Playing a DivX video Chapter
17
You can play a DivX disc using the built-in 6 Current folder name indicator Playing a DivX video
drive of the navigation system. This section de- Shows the folder name currently playing.
scribes those operations.
7 Digital sound format indicator
Starting procedure Shows the digital sound format (surround
sound format) currently selected.
1 Display the AV operation screen.
= For details of the operations, refer to Dis- 8 Audio channel indicator
playing the AV operation screen on page 71. Shows the current audio channel type, such
as “Mch” (Multi-channel).
2 Insert the disc you want to play into
the disc-loading slot. 9 Repeat range indicator
The source changes and then playback will Shows which repeat range has been selected.
start. Setting a repeat play range
Indicator Meaning
= For details, refer to Inserting and ejecting a
disc on page 15. Plays the whole of the current disc.
p If the disc is already set, touch [Disc] on the Repeats just the current file.
left edge of the screen.
Repeats just the current folder.
= For details, refer to Selecting a source on
page 71. a Play time indicator
Shows the elapsed playing time within the
3 Use the touch panel keys on the screen current file.
to control the disc.
= For details, refer to Using the touch panel
keys on page 91.
Reading the screen Using the touch panel keys
2 34 5 6 Playback screen
1 12 3
7 4
8
9 5
a dcba 987 6
1 Source icon p With some discs, the icon 9 may be dis-
Shows which source has been selected. played, meaning that the operation is inva-
lid.
2 Current time
3 File number indicator 1 Selects a file from the list
Touching the key displays the list which lets
Shows the file number currently playing. you find file names or folder names on a disc.
4 Folder number indicator p A dash (–) is displayed if there is no cor-
responding information.
Shows the folder number currently playing.
5 Current file name indicator
Shows the file name currently playing.
Engb 91
Chapter
17 Playing a DivX video
Touching a folder on the list shows its content. 8 Switches the subtitle language
You can play a file on the list by touching it. You can switch the subtitle language while the
disc is playing when a disc has multilingual
The contents of the folder in which the cur- data (multi-subtitle).
rently playing file is located are displayed. p Each time you touch this key changes
2 Recalls equaliser curves the subtitle language.
= For details, refer to Using the equaliser = For details, refer to Setting the top-prior-
ity languages on page 95.
on page 142.
3 Hides the touch panel keys and informa- 9 Switches the audio language
You can switch the audio language while the
tion of the current video disc is playing when a disc has multilingual
Touching shows only the current video. data (multi-audio).
p If you want to display the touch panel p Each time you touch this key changes
the audio language.
keys and information of the current = For details, refer to Setting the top-prior-
video again, touch anywhere on the LCD ity languages on page 95.
screen.
4 Operates some functions by swipe action a Changing the wide screen mode
p When the video is displayed in full = For details, refer to Changing the wide
screen mode, the whole screen be- screen mode on page 93.
comes a swipe response area.
= For details, refer to Swipe action on page b Frame-by-frame playback (or slow-motion
25. playback)
5 Sets a repeat play range = For details, refer to Frame-by-frame play-
The repeat play range can be changed by only back on page 92.
touching a single key. = For details, refer to Slow motion playback
p If you select another folder during re- on page 92.
peat play, the repeat play range changes
to . c Stops playback
p If you perform fast reverse or fast for- d Playback and Pause
ward during , the repeat play range
changes to . Touching [d] or [e] switches between play-
p When is selected, it is not possible back and pause.
to playback a subfolder of that folder.
= For details, refer to Repeat range indi- Frame-by-frame playback
cator on page 91.
6 Displays the “Phone” screen This lets you move ahead one frame at a time
= For details, refer to Displaying the phone during pause.
menu on page 61.
7 Searches for a desired scene and starts % Touch [r] during pause.
playback from a specified time Each time you touch [r], you move ahead
= For details, refer to Starting playback one frame.
from a specified time on page 93.
p To return to normal playback, touch [d] or
[e].
p With some discs, images may be unclear
during frame-by-frame playback.
Slow motion playback
This lets you slow down playback speed.
92 Engb
Playing a DivX video Chapter
17
% Touch and hold [r] until is dis- 1 Touch on the “DivX” screen.
played during playback. p The appearance of this key changes accord-
The icon is displayed, and forward slow ing to the current setting.
motion playback begins.
2 Touch the desired mode.
p To return to normal playback, touch [d].
p There is no sound during slow motion play- Playing a DivX video
back.
p With some discs, images may be unclear
during slow motion playback.
p Reversed slow motion playback is not possi-
ble.
Starting playback from a ! Full
specified time A 4:3 picture is enlarged in the horizontal
direction only, enabling you to enjoy a 4:3
You can search for a desired scene by specify- TV picture (normal picture) without any
ing the time. omissions.
p Time search is impossible when disc play-
! Just
back has been stopped. The picture is enlarged slightly at the centre
1 Touch . and the amount of enlargement increases
2 Touch the keys to input the target num- horizontally toward the ends of the picture,
ber or time and then touch [Enter]. enabling you to enjoy a 4:3 picture without
sensing any disparity, even on a wide
! To select 5 minutes 3 seconds, touch [5], screen.
[min], [3], [sec] and [Enter] in order.
! Cinema
! To select 71 minutes 00 seconds, touch [7], A picture is enlarged by the same propor-
[1], [min] and [Enter] in order. tion as “Full” or “Zoom” in the horizontal di-
rection and by an intermediate proportion
! To select 100 minutes 05 seconds, touch between “Full” and “Zoom” in the vertical
[1], [0], [0], [5], [sec] and [Enter] in order. direction; ideal for a cinema-sized (wide
screen) picture where captions lie outside
p To cancel an input number, touch . the frame.
To cancel the input numbers, touch and
hold . ! Zoom
A 4:3 picture is enlarged in the same pro-
Changing the wide screen mode portion both vertically and horizontally;
ideal for a cinema-sized (wide screen) pic-
You can set the screen size of video. ture.
p The default setting is “Full”.
! Normal
A 4:3 picture is displayed normally, giving
you no sense of disparity since its propor-
tions are the same as those of the normal
picture.
p Images may be unclear when “Cinema” or
“Zoom” is selected.
Engb 93
Chapter
17 Playing a DivX video
p Remember that use of this system for com- Pressing and holding the TRK button
mercial or public viewing purposes may You can perform fast reverse or fast for-
constitute an infringement on the author’s ward.
rights protected by the Copyright Law.
Playing DivX® VOD content
Some DivX VOD (video on demand) content
may only be playable a fixed number of times.
When you load a disc containing this type of
DivX VOD content, the remaining number of
plays is shown on-screen and you then have
the option of playing the disc (thereby using
up one of the remaining plays), or stopping. If
you load a disc that contains expired DivX
VOD content (for example, content that has
zero remaining plays), “This DivX rental has
expired.” is displayed.
p If your DivX VOD content allows an unlim-
ited number of plays, then you may load
the disc into your player and play the con-
tent as often as you like, and no message
will be displayed.
p In order to play DivX VOD content on this
unit, you first need to register the unit with
your DivX VOD content provider. For infor-
mation about your registration code, refer
to Displaying your DivX VOD registration
code on page 140.
p DivX VOD content is protected by a DRM
(Digital Rights Management) system. This
restricts playback of content to specific, re-
gistered devices.
% If the message is displayed after load-
ing a disc containing DivX VOD content,
touch [d].
Playback of the DivX VOD content will start.
p Touch [o] or [p] to switch between
files.
p If you do not want to play the DivX VOD con-
tent, touch [g].
Operating by hardware
buttons
Pressing the TRK button
You can skip files forward or backward.
94 Engb
DVD-Video or DivX setup Chapter
18
This chapter describes how to configure the 1 Display the “DVD/DivX® Setup” screen. DVD-Video or DivX setup
DVD-Video/DivX playback. = For details, refer to Displaying DVD/DivX®
Setup menu on page 95.
Displaying DVD/DivX®
Setup menu 2 Touch [Subtitle Language], [Audio Lan-
guage] or [Menu Language].
1 Press the HOME button to display the Each language menu is displayed and the cur-
“Top Menu” screen. rently set language is selected.
2 Touch .
3 Touch the desired language.
The “Edit/Settings” screen appears. When you select “Others”, a language code
3 Touch [Source Settings]. input display is shown. Input the four-digit
The “Setting according to source” screen ap- code of the desired language then touch [OK].
pears.
4 Touch [DVD/DivX® Setup]. = For details, refer to Language code chart for
The “DVD/DivX® Setup” screen appears. DVDs on page 98.
5 Touch the item you want to configure.
p If the selected language is not recorded on
Setting the top-priority the disc, the default language specified on
languages the disc is output and displayed.
You can assign the top-priority language to the p You can also switch the subtitle and audio
top-priority subtitle, audio and menu in initial language by touching or during
playback. If the selected language is recorded playback.
on the disc, subtitles, audio and menu are dis- Even if you touch or to switch the
played or output in that language. subtitle or audio language, this setting will
not change.
Setting the angle icon display
You can set the angle icon to display in
scenes where the angle can be switched.
1 Display the “DVD/DivX® Setup” screen.
= For details, refer to Displaying DVD/DivX®
Setup menu on page 95.
2 Touch [Multi Angle].
3 Touch [On] or [Off].
! On (default):
Displays the angle icon in scenes where the
angle can be switched.
! Off:
Hides the angle icon.
Engb 95
Chapter
18 DVD-Video or DivX setup
Setting the aspect ratio Setting the code number and level
There are two kinds of displays. A wide screen When you first use this function, register your
display has a width-to-height ratio (TV aspect) code number. If you do not register a code
of 16:9, while a regular display has a TV aspect number, the parental lock will not operate.
of 4:3. If you use a regular rear display with a
TV aspect of 4:3, you can set the aspect ratio 1 Display the “DVD/DivX® Setup” screen.
suitable for your rear display. (We recommend = For details, refer to Displaying DVD/DivX®
use of this function only when you want to fit it Setup menu on page 95.
to the rear display.)
p When using a regular display, select either 2 Touch [Parental Level].
“Letter Box” or “Panscan”. Selecting 3 Touch [0] to [9] to input a four-digit
“16:9” may result in an unnatural image. code number.
1 Display the “DVD/DivX® Setup” screen. 4 While the input number is displayed,
= For details, refer to Displaying DVD/DivX® touch [OK].
Setup menu on page 95. The code number is registered, and you can
now set the level.
2 Touch [TV Aspect].
5 Touch any of [1] to [8] to select the de-
3 Touch [16:9], [Letter Box] or [Panscan]. sired level.
The parental lock level is set.
! 16:9: Wide screen image (16:9) is displayed
! Parental Level 8: Playback of the entire
as it is (initial setting). disc is possible (initial setting).
! Letter Box: The image is in the shape of a ! Parental Level 7 to Parental Level 2: Play-
back of discs for children and non-adult or-
letter box with black bands at the top and iented discs is possible.
bottom of the screen. ! Parental Level 1: Only playback of discs for
children is possible.
! Panscan: The image is cut short at the right
p If you want to change the parental level al-
and left of the screen. ready set, enter the registered code number
and then select the parental level.
p When playing discs that do not have a pan-
p We recommend that you keep a record of
scan system, the disc is played back with your code number in case you forget it.
“Letter Box” even if you select “Panscan” p The parental lock level is recorded on the
disc. You can confirm it by looking at the
setting. Confirm whether the disc package disc package, the included literature or the
disc itself. You cannot use the parental lock
bears the mark. with discs that do not feature a recorded
parental lock level.
p Some discs do not enable changing of the
p With some discs, parental lock operates to
TV aspect. For details, refer to the disc’s in- skip certain scenes only, after which normal
playback resumes. For details, refer to the
structions. disc’s instructions.
Setting the parental lock p If you forget the registered code number,
touch 10 times on the number input
Some DVD-Video discs let you use parental screen. The registered code number is can-
lock to set restrictions so that children cannot celled, letting you register a new one.
watch violent or adult-oriented scenes. You
can set the parental lock level in steps as de-
sired.
p When you set a parental lock level and then
play a disc featuring a parental lock, code
number input indications may be dis-
played. In this case, playback will begin
when the correct code number is input.
96 Engb
DVD-Video or DivX setup Chapter
18
Setting the auto play p The DivX subtitles will be displayed even
when the subtitle file setting is on if no cor-
When a DVD disc with a DVD menu is in- responding subtitle files exist.
serted, this unit will cancel the DVD menu
automatically and start playback from the first p Up to three subtitle lines can be displayed
chapter of the first title. collectively.
p This function is available on DVD-Video.
p Some DVDs may not operate properly. If DVD-Video or DivX setup
this function is not fully operable, turn this
function off and start playback.
1 Display the “DVD/DivX® Setup” screen.
= For details, refer to Displaying DVD/DivX®
Setup menu on page 95.
2 Touch [Auto Play].
3 Touch [On] or [Off].
! Off (default):
Deactivates the auto play function.
! On:
Activates the auto play function.
p When “Auto Play” is set to “On”, the repeat
range is automatically set to .
Setting the subtitle file for
DivX
You can select whether to display DivX exter-
nal subtitles or not.
p If no DivX external subtitle files exist, the
original DivX subtitles are displayed even
when “Custom” is selected.
1 Display the “DVD/DivX® Setup” screen.
= For details, refer to Displaying DVD/DivX®
Setup menu on page 95.
2 Touch [Subtitle File].
3 Touch [Original] or [Custom].
p Up to 42 characters can be displayed on
one line. If more than 42 characters are set,
the line breaks and the excess characters
are displayed on the next line.
p Up to 126 characters can be displayed on
one screen. If more than 126 characters are
set, the excess characters will not be dis-
played.
Engb 97
Chapter
18 DVD-Video or DivX setup
Language code chart for DVDs
Two-letter Language Two-letter Language Two-letter Language
code, input code, input code, input
code Afar code Interlingue code Rundi
aa, 0101 Abkhazian ie, 0905 Inupiaq rn, 1814 Romanian
ab, 0102 Afrikaans ik, 0911 Indonesian ro, 1815 Russian
af, 0106 Amharic in, 0914 Icelandic ru, 1821 Kinyarwanda
am, 0113 Arabic is, 0919 Italian rw, 1823 Sanskrit
ar, 0118 Assamese it, 0920 Hebrew sa, 1901 Sindhi
as, 0119 Aymara iw, 0923 Japanese sd, 1904 Sango
ay, 0125 Azerbaijani ja, 1001 Yiddish sg, 1907 Serbo-Croat
az, 0126 Bashkir ji, 1009 Javanese sh, 1908 Sinhala
ba, 0201 Belarusian jw, 1023 Georgian si, 1909 Slovak
be, 0205 Bulgarian ka, 1101 Kazakh sk, 1911 Slovenian
bg, 0207 Bihari kk, 1111 Greenlandic sl, 1912 Samoan
bh, 0208 Bislama kl, 1112 Central Khmer sm, 1913 Shona
bi, 0209 Bengali km, 1113 Kannada sn, 1914 Somali
bn, 0214 Tibetan kn, 1114 Korean so, 1915 Albanian
bo, 0215 Breton ko, 1115 Kashmiri sq, 1917 Serbian
br, 0218 Catalan ks, 1119 Kurdish sr, 1918 Swati
ca, 0301 Corsican ku, 1121 Kirghiz ss, 1919 Sotho
co, 0315 Czech ky, 1125 Latin st, 1920 Sundanese
cs, 0319 Welsh la, 1201 Lingala su, 1921 Swedish
cy, 0325 Danish ln, 1214 Lao sv, 1922 Swahili
da, 0401 German lo, 1215 Lithuanian sw, 1923 Tamil
de, 0405 Dzongkha lt, 1220 Latvian ta, 2001 Telugu
dz, 0426 Greek lv, 1222 Malagasy te, 2005 Tajik
el, 0512 English mg, 1307 Maori tg, 2007 Thai
en, 0514 Esperanto mi, 1309 Macedonian th, 2008 Tigrinya
eo, 0515 Spanish mk, 1311 Malayalam ti, 2009 Turkmen
es, 0519 Estonian ml, 1312 Mongolian tk, 2011 Tagalog
et, 0520 Basque mn, 1314 Moldavian tl, 2012 Tswana
eu, 0521 Persian mo, 1315 Marathi tn, 2014 Tonga
fa, 0601 Finnish mr, 1318 Malay to, 2015 Turkish
fi, 0609 Fijian ms, 1319 Maltese tr, 2018 Tsonga
fj, 0610 Faroese mt, 1320 Burmese ts, 2019 Tatar
fo, 0615 French my, 1325 Nauru tt, 2020 Twi
fr, 0618 Western Frisian na, 1401 Nepali tw, 2023 Ukrainian
fy, 0625 Irish ne, 1405 Dutch uk, 2111 Urdu
ga, 0701 Scot.Gaelic nl, 1412 Norwegian ur, 2118 Uzbek
gd, 0704 Galician no, 1415 Occitan uz, 2126 Vietnamese
gl, 0712 Guarani oc, 1503 Oromo vi, 2209 Volapük
gn, 0714 Gujarati om, 1513 Oriya vo, 2215 Wolof
gu, 0721 Hausa or, 1518 Panjabi wo, 2315 Xhosa
ha, 0801 Hindi pa, 1601 Polish xh, 2408 Yoruba
hi, 0809 Croatian pl, 1612 Pashto yo, 2515 Chinese
hr, 0818 Hungarian ps, 1619 Portuguese zh, 2608 Zulu
hu, 0821 Armenian pt, 1620 Quechua zu, 2621
hy, 0825 Interlingua qu, 1721 Romansh
ia, 0901 rm, 1813
98 Engb
Playing music files (from USB or SD) Chapter
19
You can play compressed audio files stored in Reading the screen Playing music files (from USB or SD)
the external storage device (USB, SD).
p When you play audio files stored on a USB 2 34 5 6
storage device, a USB interface cable for 1
iPod (sold separately) is required for con-
nection. 7
p In the following description, the SD mem-
ory card and USB memory device are col- p This unit may not achieve optimum perfor-
lectively referred to as the “external storage mance with some external storage devices.
device (USB, SD)”. If it indicates the USB
memory device only, it is referred to as the p You can play back the files on a USB sto-
“USB storage device”. rage device compliant with the Mass Sto-
rage Class. For details about the USB
Starting procedure Class, refer to the manual supplied with
the USB storage device.
1 Display the AV operation screen.
= For details of the operations, refer to Dis- 1 Source icon
playing the AV operation screen on page 71. Shows which source has been selected.
2 Insert the SD memory card into the SD 2 File number indicator
card slot or plug the USB storage device Shows the number of the file currently play-
into the USB connector. ing.
= For details, refer to Plugging in a USB sto- 3 Current time
rage device on page 18. 4 File type indicator
= For details, refer to Inserting and ejecting an Shows the type of audio files.
SD memory card on page 16. 5 Playback mode
6 Current file information
p Playback is performed in order of folder
numbers. Folders are skipped if they con- ! : Track title
tain no playable files. If there are no play- Shows the title of the track currently
able files in folder 01 (root folder), playback playing (when available).
starts from folder 02. p If the title of a track is not available,
the file name appears.
3 Touch [USB] or [SD] on the left edge of
the screen to display the “USB” or “SD” ! : Artist name
screen. Shows the artist name currently playing
(when available).
4 Use the touch panel keys on the screen
to control the external storage device ! : Folder name/Album title
(USB, SD). Shows the title of the album of the cur-
rent file (when available).
= For details, refer to Using the touch panel p If the title of an album is not avail-
keys (Music) on page 100. able, the folder name appears.
! Play time
Shows the elapsed playing time within
the current file.
p “- - - - - - -” is displayed if there is no corre-
sponding information.
Engb 99
Chapter
19 Playing music files (from USB or SD)
7 Playback condition indicator Touching the key displays the list which lets
Indicates the current playback condition. you find track titles or folder names on an ex-
Playing files in random order ternal storage device (USB, SD).
Indicator Meaning Touching a folder on the list shows its content.
Does not play files in random order. You can play a file on the list by touching it.
Plays all audio files in the current re-
peat play range in random order. 3 Recalls equaliser curves
= For details, refer to Using the equaliser
Setting a repeat play range on page 142.
Indicator Meaning
4 Operates some functions by swipe action
Repeats all compressed audio files = For details, refer to Swipe action on page
in the selected external storage de- 25.
vice (USB, SD).
5 Sets a repeat play range
Repeats just the current file. The repeat play range can be changed by only
touching a single key.
Repeats the current folder. p If you skip the file forward or backward
when the repeat play range in , the re-
Using the touch panel keys peat play range changes to .
(Music) = For details, refer to Playback condition
indicator on page 100.
1 23
6 Displays the “Phone” screen
4 = For details, refer to Displaying the phone
menu on page 61.
5
7 Plays files in random order
8 76 The files in the current repeat play range can
1 Switches the operation screen be played at random by only touching a single
key.
Touching this key switches between the p If you turn the random play on when the
screen to operate music files and that to oper- repeat play range is set to , the repeat
ate video files. This touch panel key is only play range changes to automati-
available when there are both audio and video cally.
files on the external storage device (USB, SD). = For details, refer to Playback condition
2 Selects a file from the list indicator on page 100.
8 Playback and Pause
Touching [d] or [e] switches between play-
back and pause.
100 Engb
The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
Pioneer AVIC-F50BT, AVIC-F950DAB, AVIC-F950BT, AVIC-F850BT EN
Discover the best professional documents and content resources in AnyFlip Document Base.
Search