Makita Accessories Catalog

79 pcs Technician’s Kit Boxed Accessories: Combination Sets 201Demolition Drilling Screwdriving

85 pcs Maklok General Purpose
Accessory Set

Diamond
Cutting, Grinding,
Polishing

Type / Size Part No Type / Size Part No Grinding,
Cutting,
1x Maklok Quick Change Chuck P-52071 Brushing

1x 120mm(L) Compact Screw Guide 46x 25mm Screwdriver Bits, Sanding,
With 8 Pieces Plastic Holders, Polishing
2x Screw Finders Size: 14x Pozi: Pz0x3pcs, Pz1x3pcs, Pz2x5pcs, Pz3x3pcs
Shearing, Routing, Sawing Muti tool Accessories
7x Hex Shank HSS Drill W/Titanium Coated 8x Slotted: 4mmx2pcs, 5x2pcs, 6x2pcs, 7x2pcs
Size: 1.5 /3.5 /4 /4.5 /5 /5.5 /6mm 8x Hex: 3mmx2pcs, 4x2pcs, 5x2pcs, 6x2pcs Nibbling Planing
9x Phillips: Ph1x3pcs, Ph2x3pcs, Ph3x3pcs
5x Hex Shank Masonry Drill, P-52065 7x Torx: T10, T15, T20, T25, T27, T30, T35 Brad Nails,
Size: 5.5/6/7/8/10mm Staples, Pin Nails
4x Depth Gauge, Size: 6,8,10,12mm
5x Hex Shank Flat Bits, Power Cutter Garden Tools Accessories Extraction Accessories Accessories
Size: 16/18/22/25/32mm 1x Allen Key, Size: 2.5mm
9x Nutdrivers,
8x 1/4" Dr. 6pt Socket, W/Plastic Holder, Size: 5, 6, 7, 8, 9, 10, 11, 13 mm & 5/16"
Size: 7/32, 1/4, 5/16, 3/8, 7/16, 11/32, 1/2, 9/16"
4x Flat Bit,
8x 1/4" Dr. 6pt Socket, W/Plastic Holder, Size: 16, 22, 25, 32mm
Size: 5/6/7/8/9/10/11/12mm
1x Countersink
1x Bit Adaptor
9x HSS Drill, Titanium Coated,
1x 1/4" Dr. Universal Joint Size: 1.5, 2, 3, 3.5, 4, 4.5, 5, 6, 6.5mm

1x 1/4" Dr., Ratchet Handle 1x Bit Stopper

19x 25mm(L) Screwdriver Bit, 1x 50mm(L) Bit Adaptor,
Size: 5x Pozi: PZ0, PZ1, PZ2, PZ2, PZ3 Size: 1/4"X1/4"

5x Hex: 3/4/5/5.5/6mm, 1x 80mm(L) Clear Screw Guide
2x Phillips: Ph1, Ph2,
3x Slotted: 3mm,4mm,5mm 7x Masonry Drill (150mm),
4x Torx: T10/20/25/27, Size: 4.5, 5, 5.5, 6, 6.5, 7, 8mm

10 x 100mm(L) Screwdriver Bit, Blow Moulded Case
Size: 5-Pozi: PZ1,PZ2,PZ2,PZ3,PZ3
Heat Gun Dust
2-Philips: Ph1, Ph2
3- Slotted: 3/4/5mm Laser Accessories

1x 50mm(L) 1/4"X1/4" Bit Adaptor Accessories

1- Stubby Bit Driver

1- 60mm Magnetic Bit Holder

4x Hole Saw (For Metal Cutting),
Size: 16/18/20/25mm

1x Arbor

1 x Stud Finder

1x 230mm Flexible Drive Shaft

1x Maklok Quick Change Chuck

Nylon Pouch

Boxed

Batteries,
Chargers

202 Boxed Accessories: Combination SetsDemolition Drilling Screwdriving 96 pcs Electrician’s Tool Kit with
Zipper case
91 pcs Service Engineers Kit

Diamond
Cutting, Grinding,
Polishing

Grinding, Type / Size Part No
Cutting,
Brushing 6x Precision Screwdriver In Plastic Box, P-51851
Size: 2x Phillips: Ph0, Ph1,
Sanding,
Polishing 4x Slotted: 1.4, 2.0, 2.4, 3.0mm

Muti tool Type / Size Part No 1x Utility Knife, 1x Stud Finder
Accessories
9x Hex Key (Metric) 19x 25mm(L) Screwdriver Bits,
Shearing, Routing, Size: 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 8mm Size: 5x Slotted: 3, 4, 5, 6, 7mm,
Nibbling Planing Sawing
9x Hex Key (Saw) 4x Phillips: PH1/2/2/3
Size: 1/16, 5/64, 3/32, 7/64, 1/8, 5/32, 3/16, 7/32, 1/4" 4x Pozi: PZ1,PZ2x2pcs,PZ3
3x Torx: T15, T20, T25
20x 25mm Screwdriver Bit, W/2pcs Plastic Holder 3x Hex: 4mm, 6mm, 7mm
Size: 4x Phillips: Ph1, Ph2, Ph2, Ph3
2x Hex/Square Drive Adaptor (25mm and 50mm)
3x Slotted: 3, 4, 5mm
3x Pozi: Pz1, Pz2, Pz3 10x 50mm(L) Screwdriver Bits,
10x Torx: T9, T10, T15, T20, T25, T27, T30, Size: 3x Slotted: 4mm, 5mm, 6mm
T35, T40, T45
3x Phillips: PH1/2/3
Brad Nails, 1x1/4" Dr.Ratchet Handle 2x Pozi: PZ1/2,
Staples, Pin Nails 2x Hex: 4mm, 5mm
1x 250mm Flexible Drive
1x 50mm Magnetic Extension, 1x Screw Finder
1x Bit Driver
3x Depth Gauge, Size: 3,6,8mm
Power Cutter Garden Tools 1x Stubby Bit Driver • P-46470
Accessories Accessories 1x 2.5 Hex Key, 1x Holesaw Arbor
24x 1/4" Dr. Socket,
Size: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14,15mm 4x BixMetal Holesaws For Metal Cutting,
Size: 16, 18, 20, 25mm
3/16, 7/32, 1/4, 9/32, 5/16, 3/8,
13/32, 7/16, 15/32, 1/2, 17/32, 9/16" 14x Nutdrivers,
Size: (7, 8, 9, 10, 11, 12, 13)mm & (1/4, 9/32, 5/16,
Heat Gun Dust 18x 1/4" Dr. Screwdriver Bits,
Accessories Extraction Size: 5x Torx: T10, T15, T20, T25, T30 11/32, 3/8, 7/16, /2)"

3x Slotted: 4, 5.5, 7mm 1x Maklok Quick Change Chuck
3x Pozi: Pz1, Pz2, Pz3
3x Phillips: Ph1, Ph2, Ph3 7x Hex Shank HSS Drill Bits, Titanium Coated
4x Hex: 3, 4, 5, 6mm Size: 4, 5, 6, 7, 8, 9, 10mm

1x 1/4" Dr. Universal Joint 5x Hex Shank Masonry Drill, Size: 5.5, 6, 7, 8, 10mm

1x 30mm Bit Adaptor 1 x 150mm Diagonal nose plier, GS handle, 1000V

1x Coupler Hex/Square Drive 1 x 150mm Linesman plier, GS handle 1000V

Laser 1x 1/4" Dr. Sliding T-Bar 5 x Insulated Screwdrivers GD handle 1000V
Accessories Size: 2 pc Slotted 3 x 100mm. 6.5 x 150mm
1x 1/4" Dr. 50mm Extenison Bar
3 pc Phllips: Ph0x75mm, Ph1x100mm, Ph2x100mm
1x 1/4" Dr. 100mm Extension Bar
1 Rachet bit driver, 1 X 3.5M Measuring tape
Boxed 1x 60mm Magnetic Bit Holder
Accessories 1 X 300mm Spirit level, 1 X Carpenter's pencil
Carrying Case
1 X Clear screw guide, , 1x 150mm Drive Extension
• It will be discontinued once current stocks is over
1x 6.4mm Drill Saw, Titanium Coated
Batteries,
Chargers 5x Hex Shank Flat Bits, Size: 16, 18, 22, 25, 32mm

Zipper Case

96 pcs Power Drill Accessory Boxed Accessories: Combination Sets 203Demolition Drilling Screwdriving
Set With Zipper Case
99 pcs Power Tool Accessory Set

Type / Size Part No Diamond
Cutting, Grinding,
1x 3.5m Tape Measure Polishing

1x 8" Plastic Level Grinding,
Cutting,
1x Pencil Brushing

6x Precision Screwdriver with Plastic Box, Type / Size Part No Sanding,
Size 2x Phillips: Ph0, Ph1 Polishing
14x Nutdrivers, P-51910
4x Slotted: 1.4, 2.0, 2.4, 3.0mm Size: (1/4, 9/32, 5/16,11/32, 3/8, 7/16, 1/2)" &
(6, 7, 8, 9, 10, 11, 12)mm
1x Clear Screw Guide 1x Countersink
13x High Speed Drill Bits with Titanium Coated,
1x 6" Long Nose Plier Size: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7mm Accessories
10x Masonry Drill Bits,
1x 6" Linesman Plier Size: 3, 4, 5, 5.5, 6, 6.5, 7, 8, 9, 10mm Shearing, Routing, Sawing Muti tool
20x 50mm(L) Screwdriver,
1x Utility Knife Size: 4x Slotted: 4.0, 4.5, 7.0, 8.0 mm
3x Pozi: Pz1, Pz2,Pz3,
1x Stud Finder 3x Phillips: #1,#2, #3
6x Torx: T10, 15, 20, 25, 30, 40
20x 25mm Bit, 4x Hex: 3.0, 4.0, 5, 5.5 mm Nibbling Planing
Size: 5x Slotted: 3, 4, 5, 6, 7mm 5x 3 Point Wood Bits, Size: 3, 5, 6, 8,10mm
30x 25mm(L) Bits with 3pcs Plastic Holder,
4x Phillips: Ph1, Ph2, Ph2, Ph3 Size: 3x Phillips: #1, #2, #3
4x Pozi: Pz1, Pz2, Pz2, Pz3 7x Pozi: Pz1x2pcs, Pz2x3pcs,Pz3x2pcs
3x Torx: T15, T20, T25 6x Torx: T10, 15, 20, 25, 27, 30
3x Hex: 4mm, 6mm, 7mm & 1x Bit Adapter 4x Hex: 4, 5, 6, 7mm
10x Slotted: 3.0 mm x 2 pcs, 4.0 mm x 2 pcs,
10x 50mm(L) Screwdriver Bits, • P-46517 4.5 mmx2 pcs, 6.0 mm x2 pcs, 7.0 mm, 8.0 mm
Size:3x Slotted: 4,5,6 mm 1x 60mm Magnetic Bit Holder
2x Screw Finders Brad Nails,
3xPhillips: PH1, PH2, PH3 3x Depth Gauge, Size: 3/5/6mm Staples, Pin Nails
2x Pozi: Pz1, Pz2 Nylon Pouch
2x Hex: 4, 5mm

1x 60mm Magnetic Extension

1x Plastic Finder Power Cutter Garden Tools Accessories Extraction Accessories Accessories

3x Drill Stopper, Size: 3, 6, 8mm

4x Hole Saw, Size: 16, 18, 20, 25mm

1x Arbor Adapter for Hole Saw

1x Bit Driver, W/Ratchet

1x 2.5 Hex Key

14x Nutdrivers, Heat Gun Dust
Size: 7, 8, 9, 10, 11, 12, 13mm & 1/4,
9/32, 5/16, 11/32, 3/8, 7/16, 1/2"

1x Quick Change Adapter

7x Hex Shank HSS Drill Bits, Titanium Coated,
Size: 4, 5, 6, 7, 8, 9, 10mm

5x Hex Shank Masonry Drill, Size: 5.5, 6, 7, 8, 10mm Accessories

1x 6.4mm Multi Drill Laser

1x 6" Flex Extension

1x 50mm(L) 1/4"X1/4" Bit Adapter Accessories

5x Flat Bits, W/Hex Shank, Size: 16,18,22,25,32mm Boxed

5x Insulated Screwdriver, Batteries,
Size: 2x Slotted: 3x100mm, 6.5x150mm Chargers

3x Phillips: Ph0x75mm, Ph1x100mm, Ph2x100mm

Zipper Case

• It will be discontinued once current stocks is over

204 Boxed Accessories: Combination SetsDemolition Drilling Screwdriving 102 pcs Drill and Screwdriver
bit set
101 pcs General Purpose
Accessory Set

Diamond
Cutting, Grinding,
Polishing

Grinding,
Cutting,
Brushing

Sanding,
Polishing

Muti tool Type / Size Part No Type / Size Part No
Accessories
6x H.S.S. Drill, Titanium Coated, 1x 60mm Magnetic Bit Holder
Shearing, Routing, Size: 3/ 4/ 5/ 6/ 8/ 10mm
Nibbling Planing Sawing 3x Flat Bits, Size: 12/16/19mm
5x 150 mm(L) Flat Drill,
Size: 16, 18, 22, 25, 32mm 5x Masonry Drill Bits, Size: 4/5.5/7/8/10mm

Brad Nails, 24x 25 mm (L) Screwdriver Bits, 1x Counter Sink
Staples, Pin Nails with 3pcs Plastic Holders,
Size: 5x POZI: PZ0, PZ1, PZ2 x 2PCS , PZ3, 13xHigh Speed Drill Bits, W/Titanium Coated
Size: 1/1.5 /2 /2.5 /3 /3.2 /3.5 /4 /4.2 /4.5 /5 /5.5 /6mm
5x Slotted: 3,4,5,6,7mm
4x Hex: 3,4,5,6mm 14x Nutdrivers,
5xPhillips: PH0, PH1, PH2x2PCS, PH3 Size: 5/32, 7/32, 1/4, 9/32, 5/16, 3/8, 7/16"&
5x Star: T10,T15,T20,T25,T30 5, 6, 7, 8, 9, 10, 11mm

Power Cutter Garden Tools 33x 50MM (L) Screwdriver Bits, • P-52059 5x Hole Saw (For Wooden Cutting), P-52037
Accessories Accessories Size: 10x POZI: PZ0x2PCS, PZ1x2PCS,PZ2x4PCS, Size: 32/38/45/54mm With 1pc Holesaw Arbor

PZ3x2PCS 1x Center Punch, Size: 1/4", 3-7/8" L
8x Phillips: PH0x2PCS, PH1x2PCS,
PH2x2PCS, PH3x2PCS 1x Screwdriver Handle
5x Slotted: 3,4,5,6,7 mm
5x Hex: 3, 4, 5, 6, 7 mm, 32x 25mm(L) Screwdriver Bits, W/4pcs Pvc Holder
5x Torx: T10, T15, T20, T25, T27 Size: 8x Hex: 3 /4 /4 /5 /5.5 /6 /6 /7mm

1x Countersink 8x Pozi: PZ0/0/1/1/2/2/3/3,
4x Slotted: 3/4/5/6mm
1x Maklok Quick Change Chuck 4x Phillips: Ph0/1/2/3
8x Torx: T10/15/20/25/27/30/35/40
1x 230mm(L) Flexible Drive Shaft
16x 50mm(L) Screwdriver Bits,
Heat Gun Dust 1x 80mm (L) Compact Screw Guide With 2pcs Plastic Holders
Accessories Extraction 4x Pozi: PZ1, PZ2x2PCS, PZ3,
1x Bit Stopper 3x Depth Gauge, 4x Slotted: 3, 4, 5, 6mm
Size:6,8,10mm 3x Phillips: PH1, PH2, PH3, 3x Hex: 3, 4, 5mm

1x Allen Key, Size: 2.5 mm 2x Bit Holder (Round Type),

6x 3 Point Wood Bits, 1x 200mm Spirit Level
Size: 3, 4, 5, 6, 8, 10mm
6x 3 Point Wood Drill,
Laser 6x Masonry Drill, Size: 3/4/5/6/7/8mm
Accessories Size: 5.5, 6, 7, 8, 9, 10 mm
2x Screw Finders
Boxed 10x Nutdrivers,
Accessories Size: 5, 5.5,6,7,8,10,11,2,13mm & 5/16" 1x 3.5m Measuring Tape

2x 50 mm (L) Bit Adaptor, Blow Moulded Case
Size: 1/4x1/4", 1/4x3/8"

Batteries, 3x Depth Guage Size: 6, 8 & 10mm
Chargers
Blow Moulded Case

• It will be discontinued once current stocks is over

Boxed Accessories: Combination Sets 205

138 pcs Power drilling / Screw Type / Size Part No Demolition Drilling Screwdriving
driving set with storage bin
1x Center Punch

4x Depth Stops,
Size: 6, 8, 10, 12mm

1x 3.2mm Hex Key

2x Glass And Tile Bit W/Hex Shank,
Size: 5.5,7mm

4x Wood Drilling Bits W/Hex Shank, Diamond
Size: 5.5,7,8,10mm Cutting, Grinding,
Polishing
5x Flat Bits, W/Hex Shank,
Size: 10,12,20,22,25mm

4x 150mm(L) Masonry Drill W/Hex Shank, Grinding,
Size: 5.5, 7, 8, 10mm Cutting,
Brushing
1x 6.4mm Drill / Saw Bit,

1x Arbor Adapter for Hole Saw

21x H.S.S. Drill W/Hex Shank, Sanding,
Size: 1.5mmx2pcs, 2mmx3pcs, 3mmx3pcs, Polishing

4mmx3pcs, 5mmx3pcs, 6mmx3pcs, Accessories
7mmx2pcs, 8mmx2pcs,

1x Quick Change Adapter Shearing, Routing, Sawing Muti tool

1x 20cm Spirit Level

1x Ratchet Bit Driver (Magnetic)

7x 50mm BIT, W/Plastic Holder, Nibbling Planing
Size: 2x Slotted: 4, 5mm

3x Hex: 4, 5, 7mm
2x Square: S1, S2

7x 50mm Bit, W/Plastic Holder, • P-46501
Size: 3x Pozi: Pz1, Pz2, Pz2
Brad Nails,
2x Torx: T15, T20 Staples, Pin Nails
2x Philips: Ph1, Ph2

3x Bit Stoppers

1x 1/2" Square Drive Adaptor

1x 3/8" Square Drive Adaptor

1x 1/4" Square Drive Adaptor Power Cutter Garden Tools Accessories Extraction Accessories Accessories

9x 4-Way Driver Barrel Complete With Body,

4 Pilot Drill Assemblies And Pozi 2 Bit
Size: No.8, No.8, No10, No.12,

48x 25mm(L) Bit, Heat Gun Dust
Size: 3x Square: S1, S2, S3

9x Hex: 4mmx2pcs, 5mmx3pcs, 6mmx2pcs, 7mmx2pcs
5x Phillips: PH0, PH1, PH2x2pcs, PH3
11x Pozi: Pz0 x 2pcs, Pz1 x 3pcs, Pz2 x 3pcs, Pz3 x 3pcs
10x Slotted: 4mmx2ps, 5mmx3pcs, 6mmx2pcs, 7mmx3pcs

10x Torx: T10, T15, T20x2pcs, T25x2pcs, T27, T30, T35, T40

10x Sockets
Size: 5,5.5,6,7,8,9,10,11,12,13mm

1 x Stubby Screw Guide

1x75mm(L) Magnetic Extension Accessories

1x80mm(L) Magnetic Clear Screw Guide Laser

Blow Molded Case With Drawer2mm Accessories

• It will be discontinued once current stocks is over

Boxed

Batteries,
Chargers

Batteries / Chargers

Battery / Charger Reference Chart 1 Batteries, Chargers 207

Charger DC70SA DC10WA DC18RC DC36RA

7.2V 7.2V 7.2V 14.4V 36V Demolition Drilling Screwdriving
10.8V 9.6V 18V only
12V 194869-3
Low Voltage Part no - - 195582-6
220 - 240 (2pin type) Part no 194320-3 630584-0 195584-2 1948-64-3
630706-2 (SAUDI) / 630A03-2 (OTHERS)
220-240 (3pin type) Part no - -

Battery Part no V/Ah 30 30 — — Diamond
B7010 — — Cutting, Grinding,
BL1013 194355-4 7.2V Minutes Minutes 22 — Polishing
BL1415 1.0Ah —
Lithium-ion BL1415N 10.8V — 50 Minutes — Grinding,
BL1430 — — Cutting,
BL1815 196066-7 1.3Ah — Minutes 22 Brushing
BL1815N —
BL1830 14.4V — — Minutes Sanding,
BL1840 — Polishing
BL1850 638586-0 — — 22
BL3626 1.3Ah — —
14.4V — Minutes
— —
196280-5 15
1.5Ah
14.4V Minutes

195444-8 — 15 — Shearing, Routing, Sawing Muti tool Accessories
3.0Ah Minutes
18V
— 22 —
195445-6 Minutes
1.3Ah
— 36 — Nibbling Planing
196235-0 18V Minutes
632A54-1 1.5Ah
— 45 —
638409-2 18V
3.0Ah Minutes

18V — — 22

196399-0 Minutes
4.0Ah

18V

196672-8
5.0Ah

194873-2 36V
2.6Ah

Automatic Refreshing Adapter ADP03 193682-6 (optional accessory). Brad Nails,
Staples, Pin Nails

Makita's Lithium-ion tools have proved market winners and now Makita's expanded range offers Power Cutter Garden Tools Accessories Extraction Accessories Accessories
a comprehensive, powerful and lightweight selection of professional tools to complete any job

Anytime Charge Longtime Storage Heat Gun Dust

No Memory Effect Low Self Discharge
No discharging required

Shock Absorbing Laser Accessories Accessories

Heavy Duty Pack

Boxed

Batteries,
Chargers

208 Batteries, Chargers

Demolition Drilling Screwdriving Battery / Charger Reference Chart 2

Charger DC1414 DC1439 DC1804 DC24SA DC18RC

7.2V 12V 7.2V 12V 7.2V 14.4V 7.2V 14.4V 7.2V 14.4V
9.6V 14.4V 9.6V 14.4V 9.6V 18V 9.6V 18V 9.6V 18V
12V 12V 24V 12V
Low Voltage Part no 193877-1 - 195582-6
220 - 240 (2pin type) Part no 193864-0 192935-0 193848-8 - 195584-2
220 - 240 (3pin type) Part no 193865-8 193827-6 630706-2 (SAUDI) / 630A03-2 (OTHERS)
- 194164-1
193828-4
194165-9

Diamond NI-Cd (Stick) Battery Part no V/Ah 30 9 30 13 30
Cutting, Grinding, 7000
Polishing 9000 191679-9 7.2 V Minutes Minutes Minutes Minutes Minutes
1.3 Ah
Battery 30 9 30 13 30
9100 191681-2 9.6 V
9120 1.3 Ah Minutes Minutes Minutes Minutes Minutes
9122
Grinding, 1200 Part no V/Ah 30 9 30 13 30
Cutting, 1202
Brushing 1220 192019-4 9.6 V Minutes Minutes Minutes Minutes Minutes
1222 1.3 Ah
Sanding, 1420 30 9 30 13 30
Polishing 1422 192638-6 9.6 V
PA18 1.3 Ah Minutes Minutes Minutes Minutes Minutes
1822
Muti tool 192595-8 9.6 V 45 14 45 20 45
Accessories 1.9 Ah
12 V Minutes Minutes Minutes Minutes Minutes

192271-4 30 9 30 13 45
1.3 Ah
Minutes Minutes Minutes Minutes Minutes
192536-4 12 V
Shearing, Routing, 1.9 Ah 45 14 45 20 45
Nibbling Planing Sawing
192681-5 12 V Minutes Minutes Minutes Minutes Minutes
1.3 Ah
30 9 30 13 30
192597-4 12 V
1.9 Ah Minutes Minutes Minutes Minutes Minutes

193062-6 14.4 V 45 14 45 20 45
1.3 Ah
Minutes Minutes Minutes Minutes Minutes
192600-1 14.4 V
Brad Nails, NI-Cd (Cluster) 1.9 Ah 30 9 30 13 30
Staples, Pin Nails
194105-7 18 V Minutes Minutes Minutes Minutes Minutes
1.3 Ah
45 14 45 20 45
192827-3 18 V
1.9 Ah Minutes Minutes Minutes Minutes Minutes

Power Cutter Garden Tools — — 30 13 30Minutes
Accessories Accessories — Minutes Minutes

— 45 20 45Minutes
Minutes Minutes

Automatic Refreshing Adapter ADP03 193682-6 (optional accessory).

* Use with interchangeable adapter ADP04 193947-6 (optional accessory).

Heat Gun Dust
Accessories Extraction

Laser
Accessories

Boxed
Accessories

Batteries,
Chargers

Batteries, Chargers 209

Battery Charger Functions Demolition Drilling Screwdriving

Label DC36RA Charger

Flashing green light indicates
Charger is plugged into correct

power supply

Flashing red light indicates Symbol indicates
battery cooling period cannot be used for
range of voltages
Solid red light indicates Diamond
less than 80% charge of battery Yellow light Cutting, Grinding,
indicates irregular Polishing
Solid red & green light indicates battery in repair
more than 80% charge of battery stage Grinding,
Cutting,
Solid green light indicates Flashing yellow light Brushing
100% charge of battery indicates irregular
cooling of battery Sanding,
Flashing Red & Green lights Polishing
indicates battery is damaged
Shearing, Routing, Sawing Muti tool Accessories
Capacity of charger

Model of Charger

Lithium-ion Battery Usage Nibbling Planing

100% Brad Nails,
Staples, Pin Nails
Always charge battery to its Maximum Capacity

Recharge battery as soon as there is a drop in performance. Ambient temperature for charging 23°c - 32°c Power Cutter Garden Tools Accessories Extraction Accessories Accessories
Do not run down battery to a critical level

Direct Sunlight Room Temperature Heat Gun Dust

Avoid using excessive force while operating cordless tools as Store batteries in a cool, dry place below 40°c and away
this demands high amperages from the batteries causing from the direct sunlight
them to overheat

Laser Accessories Accessories

Discard batteries in a safe way Boxed

Batteries,
Chargers

Demolition Drilling Screwdriving210 Batteries, Chargers

Diamond Optimum Charging
Cutting, Grinding,
Polishing It is necessary to cool down the battery before you begin to charge it as after use it is at a very high
temperature. We are able to produce fast charge times ifour batteries & charger are kept cool while the
Grinding, battery is connected.
Cutting,
Brushing Longer Work Time - Built-in Memory Chip

Sanding,Makita's 18v & 14v batteries have a built in memory chip that records the
Polishingbattery usage history. While the battery is connected it will transmit the
data to the charger.
Muti tool
AccessoriesLonger Work Time - Built-in Memory Chip

Shearing, Routing,The CPU built in the charger analyzes its condition; high temperature,
Nibbling Planing Sawingre-charge after full charged, over-discharging.
The battery lasts long life because it can be charged at the best method
Brad Nails,and time.
Staples, Pin Nails
Well Balanced Charging
Power Cutter Garden Tools
Accessories AccessoriesOn the left you can see how the Makita Lithium-ion battery charges evenly throughout all the cells and on
discharging it drains evenly to resulting in an optimum charge. Compared to our competitors Battery Packs
Heat Gun Dustyou can see how the cells do not get an even charge resulting in cells not being used completely, so that
Accessories Extractionworkloads are decreased at a charge.

Laser
Accessories

Boxed
Accessories

Batteries,
Chargers

18V Lithium-ion Battery Ranges Batteries, Chargers 211Demolition Drilling Screwdriving

NEW NEW NEW

1.5Ah BL1815N 3.0Ah BL1830 4.0Ah BL1840 5.0Ah BL1850 Diamond
Cutting, Grinding,
18v Lithium-ion 18v Lithium-ion 18v Lithium-ion 18v Lithium-ion Polishing
1.5Ah (BL1815N) 3.0Ah (BL1830) 4.0Ah (BL1840) 5.0Ah (BL1850)
Grinding,
PART NO: 196235-0 PART NO: 638409-2 PART NO: 196399-0 PART NO: 196672-8 Cutting,
PART NO: 632A54-1 Brushing
The Makita 3.0Ah The Makita 4.0Ah The new Makita 5.0Ah
The new Makita 1.5Ah battery with an battery with an battery with an Sanding,
battery with an unbeatable 22 minute unbeatable 36 minute unbeatable 45 minute Polishing
unbeatable 15 minute charge time. Same charge time. Same charge time. Same
charge time. weight and size as the weight and size as the weight and size as the Shearing, Routing, Sawing Muti tool Accessories
5.0Ah and 4.0Ah 5.0Ah and 3.0Ah 4.0Ah and 3.0Ah
batteries. batteries. batteries. Nibbling Planing

15 min 22 min 36 min 45 min Brad Nails,
charging charging charging charging Staples, Pin Nails

Compatible Check Power Cutter Garden Tools Accessories Extraction Accessories Accessories

Check below if your machine is compatible with an 18V Lithium-ion battery Heat Gun Dust
The 4.0Ah / 5.0Ah 18v Li-ion battery (BL1840 / BL1850) will work with your 18v machine if it has
a star on the battery terminal, has a yellow terminal with a star or has a yellow terminal only.

COMPATIBLE COMPATIBLE COMPATIBLE x

NOT COMPATIBLE

Laser Accessories Accessories

BLACK TERMINAL YELLOW TERMINAL YELLOW TERMINAL BLACK TERMINAL Boxed
WITH SYMBOL WITH SYMBOL WITHOUT SYMBOL WITHOUT SYMBOL

Batteries,
Chargers

212 Batteries, ChargersDemolition Drilling Screwdriving

(Available in 36V, 18V, 14.4V, 10.8V and 7.2V)

Diamond Lithium-ion Battery 36V (2.6 Ah) Lithium-ion Battery 18V (3.0 Ah)
Cutting, Grinding,
Polishing

Battery ID Battery Ah Type Voltage Part no Battery ID Battery Ah Type Voltage Part no

Grinding, BL3626 2.6 Ah Li-ion 36 V 194873-2 BL1830 3.0 Ah Li-ion 18 V 638409-2
Cutting,
Brushing

Sanding,
Polishing

Muti tool
Accessories

Shearing, Routing, NEW NEW
Nibbling Planing Sawing
Lithium-ion Battery 18V (5.0 Ah) Lithium-ion Battery18V (1.5 Ah)

Battery ID Battery Ah Type Voltage Part no Battery ID Battery Ah Type Voltage Part no

BL1850 5.0 Ah Li-ion 18 V 196672-8 BL1815N 1.5 Ah Li-ion (with box) 18 V 632A54-1
BL1815N 1.5 Ah Li-ion (without box) 18 V 196235-0

Brad Nails, It will be discontinued
Staples, Pin Nails

Power Cutter Garden Tools NEW
Accessories Accessories
Lithium-ion Battery 18V (4.0 Ah) Lithium-ion Battery 18V (1.3 Ah)

Heat Gun Dust Battery ID Battery Ah Type Voltage Part no Battery ID Battery Ah Type Voltage Part no
Accessories Extraction
BL1840 4.0 Ah Li-ion 18 V 196399-0 BL1815 1.3 Ah Li-ion 18 V 195445-6

Laser 18V LITHIUM-ION BATTERY
Accessories SAME WEIGHT / MORE POWER

Boxed / 5.Ah
Accessories

Batteries, MAKITA MAKITA
Chargers 18V LI-ion 3.0Ah 18V LI-ion 4.0Ah / 5.0Ah

Batteries, Chargers 213

Demolition Drilling Screwdriving

Lithium-ion Battery 14.4V (3.0 Ah) Lithium-ion Battery 10.8V (1.3 Ah) Diamond
Cutting, Grinding,
Battery ID Battery Ah Type Voltage Part no Battery ID Battery Ah Type Voltage Part no Polishing

BL1430 3.0 Ah Li-ion 14.4 V 195444-8 BL1013 1.3 Ah Li-ion 10.8 V 196066-7

Grinding,
Cutting,
Brushing

Sanding,
Polishing

Shearing, Routing, Sawing Muti tool Accessories

NEW Lithium-ion Battery 7.2V (1.0 Ah)

Lithium-ion Battery 14.4V (1.5 Ah) Battery ID Battery Ah Type Voltage Part no

Battery ID Battery Ah Type Voltage Part no BL7010 1.0 Ah Li-ion 7.2 V 194355-4 Nibbling Planing

BL1415NA 1.5 Ah Li-ion 14.4 V 196280-5

Brad Nails,
Staples, Pin Nails

Lithium-ion Battery 14.4V (1.3 Ah) Power Cutter Garden Tools Accessories Extraction Accessories Accessories

Battery ID Battery Ah Type Voltage Part no

BL1415 1.3 Ah Li-ion 14.4 V 638586-0

Heat Gun Dust

Laser Accessories Accessories

Boxed

Batteries,
Chargers

Demolition Drilling Screwdriving214 Batteries, Chargers Original battery.
Available in stick or cluster format.
Diamond Ni-Cd Batteries Sintered cell structure with a 1.2v cell size.
Cutting, Grinding,
Polishing User benefits 9.6V Ni-Cd Battery

Performance matched to machine.
900+ charges - when charged correctly.
Compatible with both Ni-Cad and Ni-MH chargers.
Green Tissue - 40% cadmium - recyclable.

18V Ni-Cd Battery

Grinding,
Cutting,
Brushing

Sanding, Battery ID Battery Ah Type Voltage Partno Battery ID Battery Ah Type Voltage Partno
Polishing
PA18 1.3 Ah Cluster 18 V 194105-7 9100 1.3 Ah Cluster 9.6 V 192019-4
Muti tool 1822 1.9 Ah Cluster 18 V 192827-3 9120 1.3 Ah Cluster 9.6 V 192638-6
Accessories 9122 1.9 Ah Cluster 9.6 V 192595-8

Shearing, Routing, 14.4V Ni-Cd Battery
Nibbling Planing Sawing
Ni-Cd Stick Battery
(9.6 V and 7.2 V)

Brad Nails, Battery ID Battery Ah Type Voltage Partno Battery ID Battery Ah Type Voltage Partno
Staples, Pin Nails
1420 1.3 Ah Cluster 14 .4 V 193062-6 7000 1.3 Ah Stick 7.2 V 191679-9
1422 1.9 Ah Cluster 14.4 V 192600-1 9000 1.3 Ah Stick 9.6 V 191681-2

Power Cutter Garden Tools 12V Ni-Cd Battery
Accessories Accessories

Heat Gun Dust Battery ID Battery Ah Type Voltage Partno Other Ni-Cd Batteries
Accessories Extraction
1200 1.3 Ah Cluster 12 V 192271-4 1.2Ah * 4pcs
1202 1.9 Ah 12 V 192536-4
Laser 1220 1.3 Ah Cluster 12 V 192681-5 For Model Battery Ah Partno
Accessories 1222 1.9 Ah Cluster 12 V 192597-4
Cluster 6723DW 1.2Ah TP00000164

Boxed
Accessories

Batteries,
Chargers

Battery Chargers Batteries, Chargers 215

DC36RA DC10WA Demolition Drilling Screwdriving

• 22 minute charge for a 36V Lithium-ion Battery • Robust fast charger for 10.8v tools.
• Application: Cordless, 10.8 volt, batteries, charging

Battery Battery Voltage Plug Part no
Type Range Pin Type
Battery Battery Plug 630584-0
Type Range Voltage Pin Type Part no Li-ion 7.2-10.8 V 220-240 2
Minutes
Li-ion 36 V 127 - 194869-3 Time Reference Chart Ah 50 Diamond
220-240 3 194864-3 1.3Ah 30 Cutting, Grinding,
Battery ID Part no V 1.3Ah Polishing
Minutes
Time Reference Chart 22 BL1013 196066-7 10.8V
BL7010 194355-4 7.2V

Battery ID Part no V Ah
36V 2.6Ah
BL3626 194873-2 Grinding,
Cutting,
Brushing

DC18RC DC07SA Sanding,
Polishing
• Very fast, 22 minute charge with audible warning • Robust fast charger for 7.2V tools.
when charging is completed. Makstar charging • Application: Cordless, 7.2 volt, batteries, charging
technology is designed to maximise the life cycle and
work volume of every Makstar battery. Battery Battery Voltage Plug Part no Shearing, Routing, Sawing Muti tool Accessories
Type Range Pin Type
• Optimum Charging system with active current 194320-3
control, active thermal control and active voltage Li-ion 7.2 V 220-240 2
control; 2 way communication with battery via cpu Charging time in (Minutes)
chips. Time Reference Chart 30

Battery ID Part no V Ah
7.2V 1.3Ah
• Can also charge Ni-Cd and Ni-Mh batteries if using the optional accessory adaptor available. BL7010 194355-4 Nibbling Planing

Battery Battery Voltage Plug Part no
Type Range Pin Type

127 - 195582-6

Li-ion / 7.2V 9.6V 220-240 2 195584-2 DC1439 (Fast Charger) Brad Nails,
Ni-cd 12V 14.4V 3 Staples, Pin Nails
630706-2 (SAUDI) • 9 - 15 minute charger for a wide variety of Makita Batteries
18V 220-240 630A03-2 (OTHERS) • Very fast charger for Ni-Cd batteries

• DC1209 Charger

Time Reference Chart Battery Battery Voltage Plug Power Cutter Garden Tools Accessories Extraction Accessories Accessories
Type Range Pin Type
Battery ID Part no V Ah Minutes Use with adapter Part no
191679-9 7.2V
7000 191681-2 1.3Ah *30 Yes Ni-Cd 7.2V 220 - 240 2 192935-0
9000 192019-4 9.6V 1.3Ah *30 9.6V 220 - 240 3 •192808-7
9100 192638-6 9.6V 1.3Ah *30 Yes 12V
9120 1.3Ah *30 Yes 14.4V
9122 192595-8 9.6V 1.9Ah *45
1200 192271-4 9.6V 1.3Ah *45 Yes Time Reference Chart
1202 192536-4 1.9Ah *45 Yes
192681-5 12V 1.3Ah Yes Battery ID Part no V Ah Charging time in (Minutes) Heat Gun Dust
1220 12V 1.9Ah *30 Yes 191679-9
1222 192597-4 12V 1.3Ah *45 Yes 7000 191681-2 7.2V 1.3Ah 9 Laser Accessories Accessories
1420 193062-6 12V 1.9Ah *30 Yes 9000 192019-4 1.3Ah 9
1422 192600-1 1.3Ah *45 Yes 9100 192638-6 9.6V 1.3Ah 9
PA18 194105-7 14.4V Yes 9120 9.6V 1.3Ah 9
192827-3 14.4V 1.9Ah *30 Yes 9122 192595-8 9.6V 1.9Ah 14
1822 18V *45 Yes 1200 192271-4 9.6V 1.3Ah 9
BL1415 638586-0 18V 1.3Ah No 1202 192536-4 1.9Ah 14
BL1415NA 196280-5 1.5Ah 15 No 192681-5 12V 1.3Ah 9
BL1430 195444-8 14.4V 3.0Ah 15 No 1220 12V 1.9Ah
195445-6 14.4V 1222 192597-4 12V 1.3Ah 14
BL1815 196235-0 14.4V 1.3Ah 22 No 1420 193062-6 12V 9
BL1815N 18V 1.5Ah 15 No 1422 192600-1 1.9Ah
BL1830 638409-2 18V 3.0Ah 15 14.4V 14
BL1840 196399-0 18V 4.0Ah 22 No 14.4V
BL1850 196672-8 5.0Ah 36 No
18V 45 No Boxed
18V

* Interchangeable adapter ADP04 193947-6 (optional accessory).
Charger works only with the help of this adpater to recharge the battery.

Batteries,
Chargers

216 Batteries, Chargers / Cordless AccessoriesDemolition Drilling Screwdriving

Battery Chargers

Quick charger DC1804

• DC1209 Charger • Charger for Ni-Cd batteries.
• Discontinued Item • 30 and 45 minutes charge for a wide variety

of Makita Batteries

Diamond For Model Charging Voltage Plug Part No. Battery Battery Plug
Cutting, Grinding, Hrs Pin Type Type Range Pin Type
Polishing 4072D Voltage Part no
3hrs 220 2Pin •• 192738-2 Ni-Cd 7.2V -
(Cordless Vacuum •192737-4 9.6V 127 193848-8
Cleaner 7.2V) 12V 193827-6
3hrs 240 3Pin •192739-0 14.4V 220 - 240 2 193828-4
18V
Grinding, 6723DW 3hrs 220 - TL00000023 220 - 240 3
Cutting,
Brushing (Cordless Screw driver)

Sanding, Time Reference Chart
Polishing
Battery ID Part no V Ah Charging time in (Minutes)
Muti tool 7.2V
Accessories 7000 191679-9 1.3Ah 30
9000 191681-2 9.6V 1.3Ah 30
Shearing, Routing, DC24SA 9100 192019-4 9.6V 1.3Ah 30
Nibbling Planing Sawing 9120 192638-6 9.6V 1.91A.h3Ah 30
• Can also charge Ni-Cd batteries if using the 9122 9.6V 1.9Ah 45
optional accessory adaptor available below 1200 192595-8 1.3Ah 30
1202 192271-4 12V 1.9Ah 45
Battery Battery Voltage Plug Part no 192536-4 12V 1.3Ah 30
Type Range Pin Type 1220 192681-5 12V 1.9Ah
1222 12V 1.3Ah 45
1420 192597-4 30
1422 193062-6 14.4V 1.9Ah
PA18 192600-1 14.4V 1.3Ah 45
1822 194105-7 18V 1.9Ah
192827-3 18V 30
45

Brad Nails, Li-ion / 7.2V 9.6V 220-240 2 194164-1
Staples, Pin Nails Ni-Cd 12V 14.4V 220-240 3 194165-9

18V
24V

Time Reference Chart DC1414

Power Cutter Garden Tools Battery ID Part no V Ah Minutes Use with adapter • Charger for Ni-Cd batteries.
Accessories Accessories Yes • 30 and 45 minutes charge for a wide
7000 191679-9 7.2V 1.3Ah *13
9000 191681-2 1.3Ah *13 Yes variety of Makita Batteries
9100 192019-4 9.6V 1.3Ah *13 Yes
9120 9.6V 1.3Ah *13 Battery Battery Voltage Plug Part no
192638-6 1.9Ah *20 Yes Type Range Pin Type
9.6V 1.3Ah *13 Yes
9122 192595-8 9.6V 1.9Ah *20 Yes
1.3Ah Yes
1200 192271-4 12V 1.9Ah *13 Yes 7.2V 127 - 193877-1
12V 1.3Ah *20 Yes 9.6V 220 - 240 2 193864-0
1202 192536-4 12V *13 Yes Ni-Cd 12V 220 - 240 3 193865-8
192681-5 12V 1.9Ah *20 Yes 14.4V
Heat Gun Dust 1220 1.3Ah Yes
Accessories Extraction 1222 192597-4 14.4V 1.9Ah *13 Yes
1420 193062-6 14.4V *20
18V
1422 192600-1 18V Time Reference Chart

PA18 194105-7 Battery ID Part no V Ah Charging time in (Minutes)
1822 192827-3 191679-9 7.2V
7000 191681-2 1.3Ah 30
* Interchangeable adapter ADP04 193947-6 (optional accessory). 9000 192019-4 9.6V 1.3Ah 30
Charger works only with the help of this adpater to recharge the battery. 9100 192638-6 9.6V 1.3Ah 30
9120 9.6V 1.3Ah 30
Laser Automatic Refreshing Adapter ADP03 193682-6 (optional accessory). 9122 192595-8 9.6V 1.9Ah 45
Accessories Charger can work with this adapter to refresh batteries . 1200 192271-4 1.3Ah 30
1202 192536-4 12V 1.9Ah 45
Boxed 192681-5 12V 1.3Ah 30
Accessories 1220 12V 1.9Ah
1222 192597-4 12V 1.3Ah 45
1420 193062-6 30
1422 192600-1 14.4V 1.9Ah
14.4V 45

Batteries,
Chargers

Adapters Batteries, Chargers and Cordeless Accessories 217 Demolition Drilling Screwdriving

Details Part No. Battery Protector NEW

Job site radio adapter

• Will be discontinued once the current stock is over.

For BMR100 • SE00000063
SE00000078

Refreshing adaptor For Battery Part No. Diamond
Cutting, Grinding,
• Battery conditioning, refresh your batteries BL1430, BL1440, BL1830, BL1840, BL1850 194649-7 Polishing
• Automatic Refreshing.

For DC18RC / DC24SA Chargers 193682-6 Battery Protector NEW Grinding,
Cutting,
Interchangeable adapter (Converter) Designed to protect the battery Brushing
• Converts slide battery charger into cluster type cartridge from dust and dripping
water in outdoor applications or Sanding,
• Will be discontinued once the current stock is over. harsh environments Polishing

For DC18RC / DC24SA Chargers • 193206-8 For Model For Battery Part No. Shearing, Routing, Sawing Muti tool Accessories
193947-6
DTD134 BL1415, BL1430, BL1440 195797-5
36V Umbilical Battery adapter DTD146, DTD147 BL1815/N, BL1830, BL1840, 195798-3
BL1850
• Umbilical cord allows the battery to be carried on the belt,
rather than on the machine. Battery Holder Nibbling Planing

• Much lighter machine. More comfortable • Keep a spare battery handy wherever you go.
for overhead or prolonged work. • Fits any Makita tool belt

Battery adapter for 36V 195311-7 Details Part No. Brad Nails,
Battery adapter for 18 X 18V 195311-9 Staples, Pin Nails
Small parts and battery holder • P-39914

• Will be discontinued once the current stock is over.

HEPA Filter Power Cutter Garden Tools Accessories Extraction Accessories Accessories

(Dust extraction system set for cordless hammer)

This system is designed NEW
to collect dust effectively
with on-off operation of
the tool’s on-off trigger
switch interlocked with
this system.

For models Part No. Heat Gun Dust

DHR242RME / RFE / Z 195897-1

Bulb for Cordless Torch Laser Accessories Accessories

2pcs per set

For model Voltage Part No. Boxed

BML185Z 18V A-90261 Batteries,
ML120, ML140 14.4V, 12V A-83973 Chargers
ML121 9.2V,12V A-30673
ML702 7.2V 192242-1
ML902, ML903 9.6V 192545-3

Batteries, Boxed Laser Heat Gun Dust Power Cutter Garden Tools Brad Nails, Shearing, Routing, Muti tool Sanding, Grinding, Diamond Demolition Drilling Screwdriving 218 Notes
Chargers Accessories Accessories Accessories Extraction Accessories Accessories Staples, Pin Nails Nibbling Planing Sawing Accessories Polishing Cutting, Cutting, Grinding,
Brushing Polishing

Batteries, Boxed Laser Heat Gun Dust Power Cutter Garden Tools Brad Nails, Shearing, Routing, Sawing Muti tool Sanding, Grinding, Diamond Demolition Drilling Screwdriving Notes 219
Chargers Staples, Pin Nails Polishing Cutting, Cutting, Grinding,
Accessories Accessories Accessories Extraction Accessories Accessories Nibbling Planing Accessories Brushing Polishing

Makita Gulf FZE PART NO: (Z)000033-1
PRINTED IN U.A.E: “V.15”
P.O.Box 17133, Jebel Ali FZE (South), Dubai - U.A.E.
Tel. (971) 4 8860804 | Fax. (971) 4 8860805

www.makita.ae