Beta General Catalogue 2018

1760B 1760/RMS 1760PA/AC
digital multimeter amperometric clamp and digital multi-meter
industrial digital multimeter
accurate and sturdy, in a 6-mm co-moulded

 shell, with antislip, shockproof outer rubber
part

A: AC 
V: AC/DC



Measuring range Base accuracy

SPECIFICATIONS AC/DC voltage 110mV – 600V ±0.8% - ±2% rdg
DC voltage: 200 mV-2/20/200/1000V
AC voltage: 2-20/200/700V AC/DC current 110μA – 10A ±1.5% - ±2% rdg
DC current: 2/20/200 mA-20 A
AC current: 2/200 mA- 20 A Resistance 110Ω – 40MΩ ±1.2% - ±2.5% rdg
Resistance: 200Ω - 2/20/200 kΩ - 2/20 MΩ
Capacity: 2/20/200 nF - 2/200 μF Capacity 11nF – 40mF ±5% - ±10% rdg (up
Temperature: -20° + 1000°C/ -4 °F ~ +2000°F
Frequency: 20kHz to 11mF)
Power supply: 1 9V battery (included)
Frequency 1100Hz – 110 MHz ±1.2% - ±1.5% SPECIFICATIONS

rdg DC voltage 400 mV - 4/40/400/600 V
AC voltage 400 mV - 4/40/400/600 V
Temperature -32°C – +1000°C ±3% - ±5% rdg AC current 40/400/1000 A
Resistance 400Ω - 4/40/400 kΩ - 4/40 MΩ
Diode test, 3V DC ±10% rdg Frequency 5/50/500 Hz - 5/50/500 kHz - 5/10 MHz
Capacity 40/400 nF - 4/40/100 μF
Continuity test <30 Ω - Temperature - 20 °C ÷ 1000 °C / -4 °F ÷ 1832 °F
Power supply: 1 9V battery (included)
1760B 
1 017600012

1760/RMS  L 
1 017600020 mm 1 017600050

1760/OHM 1760PA/AC 190

Multimeter/megohmmeter for high voltage 1760PA/80 1760PA/AC-DC
insulation testing. AC/DC amperometric clamp, 80A amperometric clamp and digital multimeter
TRUE RMS indicator
Designed to measure low current
leakage or absorption values on vehicles 

 A: AC/DC 
V: AC/DC

CAT. IV
600V
CAT. III
1000V

• Range: 1mA-80A AC/DC
• Torch function with white LED
• Backlit LCD display
• Zero setting function
• Hold function
• Auto power off
• Power supply: 2 1.5V AAA-type batteries

1760PA/80 
1 017600002

Measuring range Base accuracy A: AC/DC
V: AC/DC
AC/DC voltage: 50mV - 1000V ±0.06% - ±0.1% rdg
SPECIFICATIONS
AC/DC current: 0.01μA - 10A ±0.5% - ±1% rdg DC voltage: 0.1mV ÷ 600V
AC voltage: 0.1mV ÷ 600V
Resistance: 0.01Ω - 50MΩ ±0.2% - ±2% rdg AC current: 0.01A ÷ 1000A
DC current: 0.01A ÷ 1000A
Meg OHM: 0.01 - 5000MΩ ±4% rdg. max current Resistance: 0.1Ω ÷ 40MΩ
Capacity: 0.001nF ÷ 40 μF
1mA Frequency: 0.001kHz ÷ 4kHz
Temperature: -40°C ÷ 1000 °C
Capacity: 5nF - 10mF ±1.5% - ±3% rdg -40°F ÷ 1832°F

Frequency: 50Hz - 100 MHz ±0.02% - ±0.1% rdg 1760PA/AC-DC

Temperature: -50 °C - +1350 °C ±0.5% rdg

Diode test: 3V dc

Continuity test: <30 Ω

1760/OHM  
1 017600025 1 017600000

 151

1760/TC2 1760PT 1760/IR1600
combination contact/non-contact digital infrared thermometer
digital tachometer  combination voltage and continuity tester, with laser aiming system
12-690V AC/DC
30 130 mm
mm Functions: 
• continuity
• phase rotation IP64
• mains testing CATIV
- 600V ;
• LED torch CATIII -
 1000V

L

L=1 m 230
mm

L
6÷690V AC/DC

H 1760PT 
1 017600150
TECHNICAL DATA
• For measuring: 1760R/TC2 TECHNICAL DATA
- non-contact rotational speed (rpm) set of reflecting tapes for item 1760/TC2 Range: da -50 °C to +1600 °C / -58 °F to +2912 °F
- contact rotational (rpm) Scale selection: °C/°F
and linear surface speed (m/min or ft/min). 1760R/TC2  Accuracy: ±1.5% or ±2 °C to 20 °C
• 5-digit LCD display. 1 017600561 Laser power: <1mW
• Scale: Response: 1sec
- non-contact speed 2.5÷99,999 rpm Emissivity: 0.10-1.0 adjustable
- contact speed 0.5÷19,999 rpm Distance ratio: (D:S) 50:1
- linear surface speed 0.05÷1,999.9 m/min. Operating temperature: 0 °C ÷ 50 °C / 32 °F ÷ 122 °F
• Frequency: 0.8 sec. Operating humidity: 10% to 90% RH
• Power supply: 4 1.5V batteries, AA size,
or 6V power supply unit (not included). Backlit LCD display
• Supplied with the following:
- adaptor for contact tip measurement; Data storage function
- male (contact) rubber tip (2 pcs.);
- female (contact) rubber tip (1 pcs.); Auto power off
- linear measurement tape (1 pcs.); Power supply: 1 9V battery (included)
- reflecting tapes;
- instruction manual; Hard case with aluminium tripod
- plastic case.
Operating manual

LH  1760/IR800 1760/IR1600 
mm mm 1 017600161 1 017600460
digital infrared thermometer
1760/TC2 230 74 with dual laser aiming system

1760K 1761

non-contact AC voltage detector with LED wire twisting pliers
mini-torch with automatic return

Testing range: 200-1000Vac 50/60Hz 95 mm
CAT III-1000V
Requires 2 AAA batteries (included)

 145 L
mm
CAT III-
180 mm 1000V

1760K 
1 017600140
152 
TECHNICAL DATA L
Range: -50 °C to +800 °C / -58 °F to +1472 °F mm  
Scale selection: °C/°F
Accuracy: ±1.0% or ±1.0 °C to 20 °C 255 1 017610101
Laser power: <1mW
Response: 150ms 1761RS/1
Emissivity: 0.10-1.0 adjustable reversible wire twisting pliers
Distance ratio: (D:S) 20:1 with automatic return
Operating temperature: 0 °C ÷ 50 °C / 32 °F ÷ 122 °F
Operating humidity: 10% to 90% RH L

Backlit LCD display L
mm  
Data storage function
220 1 017610130
Auto power off
Power supply: 1 9V battery (included)
Soft cloth case (included)

Operating manual

1760/IR800 
1 017600380

1762 1767PMR 1771
revolving punch pliers magnetic tool holder, rectangular utility knife, 18 mm,
supplied with 3 blades
365 mm
18
165 mm
mm
170 mm
Ø

1771 
10 017710000
1771BM
L utility knife, 18 mm,
6 spare blades
Ø L 
mm 2 017620001
mm
210 
2-2,5-3 2 017660001

3,5-4-4,5  1 017670010
2 017660005
1767PMR

1766 A
double suction lifter
1770
extra flat utility knife, L
9 mm snap-off blade
LA 
A mm mm 10 017710050

380 mm 1771BM 170 18

L

LA  1771RL
10 017700001
mm mm 18 mm snap-off spare blades (10 pieces)
1770 140 9 for utility knives 1771, 1771BM
120 mm
1770A 18
 max mm
kg utility knife 9 mm with automatic blade locking
mechanism, 110 mm
50 3 blades

1766A A 1771RL 
single suction cup L 5 017710010

LA  1772R
mm mm 10 017700025
utility knife with retractable trapezoidal blade,
1770A 135 9 supplied with 5 blades

120 mm 1770RL A
L
 max 9 mm snap-off blades 10 pieces
kg for utility knives 1770 and 1770A

30 9  LA 
mm 5 017700010 mm mm 5 017720006
1767PMC
magnetic tool holder, round 85 mm 1772R 125 18

Ø 1770RL 1772H
150 mm
1770BM safety utility knife with retractable blade,
1767PMC utility knife, 9 mm, 6 blades supplied with 2 blades

A A

LA L L
mm mm
  LA 
1 017670020 1770BM 140 9 10 017700050 mm mm 5 017720029

1772H 170 18  153

1772RL/2 1777BM 1778D

10 long trapezoidal spare blades, in box, for foldaway knife with wire stripping notch, foldaway knife,
utility knives, 1772R,1772H,1774,1777BMT, stainless steel blade stainless steel blade and handle,
1777T in case

18 A A
mm L1
L1
60 mm L L

1772RL/2  L L1 A 
5 017720017 mm mm mm 5 017770100
1773A
utility knife, 25 mm 1777BM 190 80 16

1777T L A L1 
mm mm mm 5 017780060
foldaway knife with trapezoidal stainless steel
blade, 1778D 180 22 78
5 spare blades
1778SCL
A
foldaway knife with soft carbon look finish,
A hardened steel blade,
L1 in case

L

LA L
mm mm
 A
1773A 180 25 10 017730000 L1

1773RL L
25 mm blades (10 pieces)
for utility knife 1773A L A L1  L A L1
mm mm mm 5 017770030 mm mm mm
25
mm 1777T 160 19 65 1778SCL 180 22 78

125 mm 
5 017780089
1773RL
 1777BMT 1778SAFE
5 017730015
foldaway knife with trapezoidal blade foldaway knife,
1774 4 adjustable blade depths hardened steel blade,
multi-function scraper with blade guard 4; 9.5; 15.5; 21.5 mm with window breaking hammer,
supplied with 3 blades seat belt cutter and knot untying features,
in case

L

L1 A
L1
1772RL/2
L
L L1
mm mm  A
5 017740001 L1
1774 165 60 L

1774A L L1 A  L A L1 
mm mm mm 5 017770050 mm mm mm 5 017780090
multifunction scraper,
bi-material handle 1777BMT 170 80 19 1778SAFE 210 25 85

A L 1778CM 1778SOS
camouflage foldaway knife,
L L1  hardened steel blade, car service knife
mm mm 1 017740011 in case with window breaking hammer
and seat belt cutter features
1774A 300 40 in case

1774A/RL A
10 blades for multifunction scraper item 1774A L1

18 L A
mm L1

1774A/RL L

154  40 mm

 L A L1  L A L1 
1 017740511 mm mm mm 5 017780099 mm mm mm 5 017780080

1778CM 195 24 80 1778SOS 205 25 85

1778V18 1783 1812 150
light duty scissors instant heat soldering iron
foldaway knife,
aluminium handle  
• in case

A L
L1 L
mm  
L
215 5 017830021
240 5 017830024

L A L1  1784
mm mm mm 5 017780018 heavy duty scissors

195 25 85 L WV 230V
L L=1,25 m Euro
1778W mm   150 230
foldaway knife, 
stainless steel blade, 175 2 017840017 1814M 1 018120015
handle with wooden inserts, 200 2 017840020 soldering irons
in case 250 2 017840025 with steel tips L=1,2 m
300 2 017840030 230V
A 
L1 Schuko

L 
1 018140225
1800/100 1 018140230
lifting airbags (max. lifting force: 100 kg ) 1 018140240

L A L1  • lifting/levelling WV L=1,25 m
mm mm mm 5 017780025 • locking doors 230V
25 230
1778W 180 22 78 A 30 230  Shuko
40 230
1778X B 
1820 1 018200003
knives for nautical maintenance, stainless soldering irons 1 018200006
steel blades, aluminium handles 1 018200008
in case

 S


AB S L

mm mm mm 
160 150 2÷55 3 018000000
1820 30
L1 L 30W
A L = 210mm
1808
1820 60
dual rating soldering iron with steel tips 60W
1824R8 L = 220mm

 20/130W L=1,2 m 1820 80
80W
230V L = 260mm
 Schuko
95 mm

L L1 A  WV  1822 
mm mm mm 2 017780050 1 018080001 high-performance soldering irons
20/130 230
1778X 185 85 25 

1781 A
slim, long blade scissors
230V
 Shuko
L=1,25 m

1781 L L 1822 120 
mm  120W 1 018220012
LxA = 250x125 mm 1 018220018
132 2 017810001 1 018220032
1822 180
180W  155
LxA = 250x125mm

1822 320
320W
LxA = 250x140mm

1823 60 1827 1830T
digital soldering station gas soldering iron, adjustable dissoldering pipe with antistatic plastic (PTFE)
supplied with soldering iron nozzle

• Temperature range: 160 °C ÷ 480 °C with ±1% accuracy. L
• Memory mode designed to save the temperature selected 240 mm
when switching off the station. L
• 3 quick selection keys (200-300-400 °C). mm  

 190 5 018300021

W   1834L/USB
60 1 018230060 1827 1 018270001 rechargeable high-brightness LED torch,
made of sturdy anodized aluminium,
1827PC up to 450 lumens
spare conical tips for item 1827 USB recharged

1823R/60 flat battery indicator (appearing when battery charge is down
spare soldering iron for item 1823 60 to 20%)
battery life: 4h
 60W 24V 1827PC/1,6 1827PC/3,2
L
1827PC 1,6 
1827PC 3,2 1 018270501 MICRO USB
1 018270502 IPX6

1823R 60  1827PCL L
1 018230066 spare knife tips for item 1827 mm  
1824R
spare tips for soldering irons 220 1 018340075

1827PCL 2,4  1834RB-L/USB
1 018270503 spare battery for item 1834L/USB

1824R 08  1827PFL
1808 1 018240100 spare naked flame tips for item 1827
1824R 12 1 018240301
1812/150 1 018240152 1827PFL 
1824R 14-M25 1 018240153 1 018270504
1814M/25 1 018240154
1824R 14-M30 1 018240302 1827/K 1834RB-L/USB 
1814M/30 1 018240303 1 018340975
1824R 14-M40 1 018240304 gas soldering iron with 7 accessories
1814M/40 1 018240305 in case with soft polyethylene  1834PS
1824R 20 1 018240307 foam base
1820/30 1 018240308 high-brightness LED torch,
1824R 60 made of sturdy, anodized aluminium,
1820/60 up to 300 lumens
1824R 80
1820/80
1824R 120-180
1822/120 -/180
1824R 320
1822/320
1824R ST-60
1823-60

1825B • Power: 30 watts to 125 watts • Batteries (not included): 2xAAA (life 9/29 h)
soldering tin wire with antioxidant • Tip temperature can be adjusted between • Lumens: 300>100>OFF
250 °C and 500 °C • IPX6
• 1 mm²; 250 g • Gas flow regulator
• Sn 99.3%; Cu 0.7% • Warm-up time: 15 seconds L
• Tank contains gas for 120 minutes' non-stop operation
• Clear tank for monitoring gas level
• Can be refilled with butane gas

1825B  1827/K  L 
1 018250251 1 018270100 1 018340310
156  mm

150

1834PM 1834RR 1836A
high-brightness LED torch, LED torch, LED headlamp, dual brightness, with
made of sturdy, anodized aluminium, rechargeable in cigarette lighter socket contactless ON/OFF sensor
up to 350 lumens
Adjustable focus • 120/65 lumens
• Batteries (not included) : • IP54
- 1xAAA (life 11/33 h) Rechargeable in cigarette lighter socket, 10-28V DC
- 2xAAA (life 13/39 h) • Batteries: 3xAAA included
- 3xAAA (life 15/45 h) IP30
• Lumens: 350>40>OFF
• Charge indicator 130 lumens
• IPX6

L

1836A 
1 018360050

L 1834RR  1836B
1 018340520 rechargeable LED headlamp, dual brightness,
L with ON/OFF sensor
mm   1835/1
LED inspection torch, • Contactless ON/OFF sensor
140 1 018340320 made of sturdy anodized aluminium • 160 lumens
• Life: 3-6 h
1834PL 1xAAA battery (not included)
high-brightness LED torch, • IP65
made of sturdy, anodized aluminium,
up to 500 lumens

• Batteries (not included) : 
- 1xAA (life 20/60 h) 1 018360200
- 2xAA (life 28/84 h) L 1836B
- 3xAA (life 36/108 h)
• Lumens: 500>40>OFF L 1837N
• Charge indicator mm  
•IPX6 magnetic, articulated lamp with high-
105 3 018350030 brightness LEDs,
L up to 400 lumens
1835/2
L LED inspection torch, • Batteries (not included) :
mm made of sturdy anodized aluminium - 1xAA (life 25/69 h)
- 2xAA (life 33/96 h)
210 2xAAA batteries (not included) - 3xAA (life 43/124 h)
• Lumens: 400>40>OFF
• Charge indicator
• Adjustable focus
•IPX6


1 018340325

1834PXL L

high-brightness LED torch,
made of sturdy, anodized aluminium,
up to 1350 lumens

• Batteries (not included) : 3xD (life 36/108 hr) L L
• Lumens: 1350>450>OFF
• Charge indicator mm 
• IPX6 3 018350060
145

L 1837N L 
L mm 1 018370002
mm  
450  157
315 1 018340330

1837/USB 1838COB
rechargeable, magnetic, articulated lamp with rechargeable inspection LED lamp
high-illuminated LEDs
micro USB charger not included • Hangable, with antislip, shockproof rubber body
• Lithium polymer battery
● Dual brightness: 150/450 lumens • 55/125 lumens
● Adjustable focus
● Lithium polymer battery 
● Charge indicator (green >85%; red <15%)
● Battery life 4-8 hours (depending on brightness) 1838/11LED IP65 
● Micro USB charging rechargeable inspection lamp with ultra-high 1838COB 1 018380010
IPX6 brightness LEDs,
lithium polymer battery
L
• Compact body made of antislip rubber
• Easy-to-replace front glass
• Swinging hook
• With charging station, 110-230Vac
• 320 lumens
• With multidirectional head LED

1838RV/11LED  1838P

IP65 rechargeable inspection pen light,
with double light emission: lamp and torch

1837/USB  • Compact body made of non-slip rubber
1 018370051 • 50/80 lumens
• Pocket hook
1837RB/USB • Magnetic base can be rotated 180 degrees
spare battery for item 1837/USB • Complete with USB/jack charging cable, 3.5mm
• Life: 2.5 hours
• IP20

1837/USB RB  
1 018370901

1837PLUS 1838/11LED 
LED spotlight for building yards 1 018380111

• Brightness: 3000 lumens; adjustable (10%; 25%; 50%; 75%; 1838RA/10-11LED
100%)
• Power supply: 100-240V AC - 50/60Hz; 26W spare power supplies for items 1838/10LED
• impact protection: IK07 and 1838/11LED
• cable: 5 m / 3x1 mm²
• Dimensions: 235 x 83 x 233 mm 1838RA/10-11LED 
1 018380903
 IP67

1838RB/10LED

spare battery for items 1838/10LED and
1838/11LED

1838RB/10LED  1838P 
1 018380902 1 018380005

 1838RR/11LED
1 018370026 charging bases for item 1838/11LED

1837PLUS

1838RR/11LED 
1 018380914

1838RV/11LED

spare scratch-proof glass for lamp
1838/11LED

1838RV/11LED 
2 018380905

158 

1838SL 1838UV
ultra-thin inspection lamp with rechargeable UV and white light inspection
ultra-high brightness LEDs. lamp
For jobs in small areas ideal for detecting leaks

• power supply: 12V, with lighter socket and battery terminals • Compact body made of antislip rubber
• 2.5-m-long cable • With charger 100-240Vac / 50-60Hz
• thickness: 6mm • 150 lumens / UV
• 345 lumens



1838FLASH S

rechargeable, ultracompact spotlight, designed
to offer the best possible solution for each use

ABUNDANT READY LIGHTING: with a maximum lighting 1838SL 
capacity of 720 lumens, and running on both battery and 1 018380101
cable, it is always ready to use.
CAN BE PLACED ANYWHERE: 1838SLR 1838UV 
-on flat surfaces: with rubber feet on three sides or 1/4" drive rechargeable, articulated LED inspection lamp 1 018380150
for stands (camera-like standard)
-on metal structures: with unscrewable magnet or hook that compact front LED (200 lumens) and head LED (100 lumens) 1839/R1
can be rotated 360 degrees. for inspections
COMPACT: no more than 85x100x155 mm in size, it can be lighting body no more than 9 mm thick transformer with USB output, spare part
easily replaced in tool bag and used in small areas. operating range: 5/2.5 hours (depending on light level setting) for items 1834L/USB; 1836B; 1837/USB;
STURDY: designed to withstand extremely severe mechanical with USB charger 1838COB
stress. Guaranteed durability. with metal hook and magnet

  IP30

1839/R1 
1 018390501

IP65 1839/R2
1838FLASH
USB/jack cable 3.5 mm, spare part for items
1836B; 1838P; 1838COB

  1839/R2 
1 018380300 1 018380201 1 018390502

1838SLR

1838RB/FLASH 1838SN 1839/R3
spare battery for item 1838/FLASH rechargeable, articulated LED inspection lamp
USB/MicroUSB cable, spare part for item
• articulated 1834L; 1837/USB
• non-slip rubber body
 • double swinging hook 1839/R3 
1 018380930 • magnets on base and back for increased adjustability 1 018390503
• with charger 100-240V / 50-60Hz
1838RB/FLASH • double light emission, front and head (spot)
• 250 lumens / spot 150 lumens
1838LED/120 • operating range: 3h / spot 3h 1840BM
LED under bonnet lamp with swivel hook • with charge indicator
230V inspection lamp,
● 5-m-long oil-proof cable  IP20 base type: E27
● 600-lumen LED strip, 7.5W
● Hook opening: 120 ÷ 170 cm ● Bulb not included L

 


E27

IP65  230V
1838LED/120 1 018380250

1838LED/120-AL L=10 m

power supplies with spare cables for item IP20
1838LED/120
L
1838LED/120-AL  1838SN  V W mm 
1 018380251 1 018380132 1 018400101
1840BM 230 60 420
 159

1842LED/BM 1843R/BM 1848
Lamp with ultra-high brightness LEDs, 100- spare inspection lamp for cable reels, base
240 Vac type E27 automatic cable reel
with Schuko type socket
• 10-m-long cable • Bulb not included
• compact body made of antislip rubber • Crush-resistant rubber cable H07 - 3x1.5 mm² - 15m
• easy-to-replace front glass 
• swinging hook • Max. 1600 W with unwound cable
• 340 lumens
• with multi-directional head LED light • Max. 1200 W with wound cable IP42

IP65 IP20 L=15 m

1843R/BM 
1 018430131

110÷230V 1846LED/BM

L Automatic cable reel with LED inspection
lamp,
100-240 Vac 
1848 1 018480015
L=10 m

1842LED/BM  ● With 230/24V safety transformer IP42 1850B
1 018420301 ● Max. 25 W IP65 heat gun


IP42
1842LED/ABM IP55 - Pos. 1 240 l/min. 300° C
Lamp with ultra-high brightness LEDs, 12-24V - Pos. 2 450 l/min. 500° C
AC/DC • can be used with gun placed vertically on worktop

• 10-m-long cable  L
• compact body made of antislip rubber
• easy-to-replace front glass  1600W
• swinging hook 300÷500 C°
• 320 lumens
• with multi-directional head LED light H

L=15 m

 IP65  230V L=2,4 m
1 018460301 Schuko
1846LED/BM
IP42 LH 
1846LED/ABM IP65 mm mm 1 018500011
Automatic cable reel 1850B 240 190
with LED inspection lamp, IP42
L 12-24V AC/DC IP55 1850C
24V heat gun
● Max. 60 W
L=10 m - Pos. I 150-250 l/min 50°C
 - Pos. II 150-500 l/min 50-650°C

1842LED/ABM  • digital display
1 018420311 • buttons designed to adjust temperature
and flow capacity
1843BM • can be used with gun placed vertically
automatic cable reel on a worktop
with 230 Vac inspection lamp, • 4 preset programmes and possibility
base type E27 and steel protector to customize other programmes

● Bulb not included L=15 m - Prog 1 250°C ca. 350 l/min

- Prog 2 350°C ca. 400 l/min L

- Prog 3 450°C ca. 500 l/min

- Prog 4 550°C ca. 400 l/min



   2000W
1 018460311 50÷650 C°

IP42 1846LED/ABM H
IP20
1846R-LED/BM L=2,4 m
spare LED lamps
230V
12-24V - AC-DC Schuko

L=15 m

1843BM  1846LED/BM R  LH 
1 018430101 1 018460331 mm mm 1 018500015
160  1850C 255 210

1850U... 1852R1750 1852S-F
nozzles for items 1850B and 1850C portable induction heater front attachable coil

1850UB 80 58
mm mm
80
mm 32 
1850UP mm

80 80 1850UF
mm mm
58
1850UB 1850 mm
1850UF
1850UP B-C 14 1850UR
1850UR B-C mm
B-C

C 1 018500100
1 018500101
1 018500102
1 018500103

1851VK 1852S-F 19 Ø 
hot glue gun with 12 thermofusible glue sticks 1852S-F 20 mm 1 018520508
in case 1852S-F 23 1 018520509
1852S-F 26 19 1 018520510
 1852S-F 32 20 1 018520511
1852S-F 38 23 1 018520512
1852S-F 45 26 1 018520513
32 1 018520514
38
45 
1 018520515
1852S-FLESS 1 018520517
flexible coil 1 018520518

1851VK  - heats and loosens bolts, hubs and bearings without using 
 320x250x50 mm 1 018510058 flames 1 018520516
- allows any type of ferromagnetic metal to be heated
1851VK-12C 1852S-FL 500
Standard equipment: 1852S-FL1000
12 thermofusible glue sticks - two front attachable coils, Ø 19 and 26 mm, for loosening nuts 1852S-FL1500
Ø 11 mm - one flat coil for heating surfaces
- one flexible coil, 800 mm long 1852 S-PIATTE
- supplied in plastic case flat coil

Technical data: 1852S-PIATTE
- input voltage: 230V AC, 50/60 Hz
1851VK-12C  - input current: max. 7,5A
1 018510062 - power: max. 1.75 kW
1851VK-12V
12 thermofusible glue sticks OPTIONAL EQUIPMENT
for painted surfaces Coils are also available in other sizes

Ø 11 mm BENEFITS
Time saving: quick, extremely accurate heating
Fire safety: does not produce flames, maximum operator safety
Functional: can be used with one hand, and coils can be easily
interchanged

FIELDS OF APPLICATION
Automotive industry
Industrial maintenance
Aviation industry
Naval industry
Petrochemical industry

1852R1750 
 480x370x130 mm -  4,5 kg 1 018520175

1851VK-12V  1852S-L
1 018510072 side attachable coils

1852S-L 19 Ø 
1852S-L 20 mm 1 018520501
1852S-L 23 1 018520502
1852S-L 26 19 1 018520503
1852S-L 32 20 1 018520504
1852S-L 38 23 1 018520505
1852S-L 45 26 1 018520506
32 1 018520507
38
45

 161

1860 140A 1860RC 1870
DC inverter welding machine for MMA and TIG spare cables for inverter welding machines solid and fluid vacuum cleaner, 20 l
electrode steel welding. item 1860
Compact and easy to carry • single-stage by-pass motor
electrode holder cable length: 2.5m • voltage: 230/240 V
Arc force, hotstart, anti-sticking and • frequency: 50/60 Hz
thermostatic protection features earth cable length: 1.8m • max. power: 1200 W
• airflow rate: 58 l/sec.
Adjustment current: 5÷140A 1860RC/140A  • max. suction power: 190 mbar
Power supply:1x230V 1860RC/160A 1 018600604 • max. drum capacity: 20 l, made of antistatic PP
1 018600606 • acoustic emissions: <70 dB(A)
Use factor (40 °C) : • cable length: 5 m
25% - 140 A 7042LCD • trolley for accessories
60% - 100 A STANDARD ACCESSORIES, Ø 36 mm
100% - 90 A Auto-darkening LCD mask, for electrode • 1 corrugated hose with ergonomic handle
Delayed fuse: 16 A welding; MIG/MAG; TIG and plasma. • 2 hard extension tubes
Protection: IP23S Solar cells power supply and lithium batteries • 1 multiuse brush for floors and fluids
Usable electrodes: Ø 1.5- 4mm rutilic, basic, stainless steel, cast for outstanding LCD filter life • 1 flat nozzle
iron etc. FILTERING SYSTEMS
supplied with 16mm² cables • 1 surface filter cartridge 1900 cm2 - 12 μm nom.
• 1 anti-foam filter PPI 45/PPI 30



 ● Viewing area: 98x43 mm IPX4
● Darkening shade: DIN 9-13, externally adjustable 1870
200 ● UV/IR protection
mm ● Light to dark time: 1/25000 s
● Dark to light time: 0.25-1s
130 mm ● Adjustable darkening sensitivity and delay
● Auto on/off
● Grinding feature
● Optimized shape to make it easier to breathe with pulled-down
screen

370 mm 
1 018700020

1860 140A   1872L
1 018600004 solid and fluid vacuum cleaner, 35 l,
"L" class certified
1860 160A
• two-stage by-pass motor
DC inverter welding machine for MMA and TIG • voltage: 230/240 V
electrode steel welding. • frequency: 50/60 Hz
Compact and easy to carry • max. power: 1100 W
• airflow rate: 55 l/sec.
Arc force, hotstart, anti-sticking and • max. suction power: 220 mbar
thermostatic protection features • max. drum capacity: 35 l, made of antistatic PE-HD
• acoustic emissions: <68 dB(A)
Adjustment current: 5÷160A • cable length: 6 m
Power supply: 1x230V STANDARD ACCESSORIES, Ø 36 mm
• 1 corrugated hose with ergonomic handle
Use factor (40 °C) : • 2 plastic extension tubes
• 1 combined brush frame
30% - 160 A • 1 section with fluid collection hoses
•1 flat nozzle
60% - 1030 A FILTERING SYSTEMS
• 1 disposable fabric bag; filtration class: "L"
• 1 filter cartridge; IFA class: "L"
• 1 anti-foam filter PPI 45/PPI 30
• 2 post-filters made of PP-laminated PET



100% - 110 A

Delayed fuse: 25 A

Protection: IP23S

Usable electrodes: Ø 1.5 - 4mm rutilic, basic, stainless steel, cast

iron etc. 
1 070420001
Supplied with 25mm² cables  7042LCD

270 7042LCD/RV
mm scratch-proof lens protector for item 7042LCD

7042LCD/RV 
2 070420101

160 mm 370 mm 7042LCD/RV-INT IPX4
 inside lens for item 7042LCD 1872L
1860 160A
1 018600006 7042LCD/RV-INT  
162  2 070420102 1 018720135

1873 1874 1870-72/FL
solid and vacuum cleaner, 30 l, solid and fluid vacuum cleaner, 50 l,
stainless steel drum stainless steel drum fluid vacuum cleaning filter
for items 1870 - 1872 - 1873 - 1874
• two-stage by-pass motor • two-stage by-pass motor
• voltage: 230/240 V • voltage: 230/240 V 1870 72/FL 
• frequency: 50/60 Hz • frequency: 50/60 Hz 1 018700027
• max. power: 1100 W • max. power: 1350 W 1872L 35/FC
• airflow rate: 55l/sec. • airflow rate: 55 l/sec. cartridge filter, "L" class,
• max. suction pressure: 220 mbar • max. suction pressure: 240 mbar for item 1872L 35
• max. drum capacity: 30 l, made of stainless steel • max. drum capacity: 50 l, made of stainless steel
• acoustic emissions: <61 dB(A) • acoustic emissions: <63 dB(A)
• cable length: 6 m • cable length: 6 m
• trolley for accessories • trolley for accessories
STANDARD ACCESSORIES, Ø 45 mm STANDARD ACCESSORIES, Ø 45 mm
• 1 corrugated hose with ergonomic handle • 1 corrugated hose with ergonomic handle
• 2 stainless steel extension tubes • 2 stainless steel extension tubes
• 1 industrial brush frame • 1 industrial brush frame
• 1 industrial section for carpets • 1 industrial section for carpets
• 1 industrial section with fluid collection hoses • 1 industrial section with fluid collection hoses
• 1 flat nozzle • 1 flat nozzle

FILTERING SYSTEMS FILTERING SYSTEMS
• 1 filter paper bag • 1 filter paper bag
• 1 surface filter cartridge 1900 cm2, 12 μm nom. • 1 surface filter cartridge 5200 cm2, 12 μm nom.
• 1 anti-foam filter PPI 45/PPI 30 • 1 anti-foam filter PPI 45/PPI 30

 

1872L 35/FC 
1 018720144

1872L 35/5S
5 disposable fabric bags, "L" class

1872L 35/5S 
1 018720136

 1874 50  1873-30/5S
1 018730030 1 018740050 5 vertical paper bags for item 1873

1873 30

1870-20/5S
5 horizontal paper bags for item 1870

 1873 30/5S 
1 018700021 1 018730031

1870 20/5S

1870-72 /FC 1874-50/5S
5 vertical paper bags for item 1874
cartridge filter 1900 cm² 12 - μm nom.
for items 1870 - 1872 - 1873

1870-72 /FC  1874 50/5S 
1 018700026 1 018740051

 163

1874-50/FC 1881 1889
pneumatic barrel pump, ratio 3:1 steel handling and storage base
cartridge filter 5200 cm² - 12 μm nom. for 2 200-l barrels
for item 1874
• Completely hot painted with epoxy powder
• Easy to carry with a fork lift truck or a transpallet
• Support cannot be placed under any part



740 mm

1874 50/FC 
1 018740056

1879 330
mm 1210 mm
9.5 l manual/pneumatic operation fluid
extractor 1881 l/min 
1 018810001
14 
1 018890200
1889
1882
1895 6
oil gun with flexible end and automatic drip ultrasonic cleaning tank,
catcher 6l

• 1/2" with special degas function
• Maximum delivery rate: 65 l/min
• Maximum operating pressure: 100 bar 
• Lockable delivery lever

440 mm

Ø 1/2"
230 mm

 14 mm  1895 6 
1879 1 018790001 1 018820010 1 018950060
1882
1879R/K4
kit of 4 spare tubes for fluid extractor 1879 1883
digital litre counter for oil
2250-O
• 1/2" heavy duty swivel creeper seat with tray
• Shockproof rubber coating
• Battery: 1 CR2 (included) 410 ÷ 530 mm
• Max. delivery rate: 0÷35 l/min
 380 mm
1 018790504 (0÷9 gal/min)
1879R/K4 • Max. pressure: 50 bar

(750 psi)
• Viscosity: 8÷5000 mPas
• Tolerance: ±0.5%


Ø 1/2"

1880 2250-O 
manual barrel pump 1 022500011

2251-O
heavy duty swivel creeper seat with drawers

1883 
1 018830035
1883NC
male-male nipple, 1/2, 410 ÷ 530 mm
for items 1882 and 1883
380 mm

gr   2251-O 
1 018800001 1 018830135 1 022510011
1880 240
1883NC
164 

2252 3027 10 3027 50
seat with castors hydraulic bench press with moving piston hydraulic press with moving piston and hoist

2252 O Maximum capacity: 10 t Maximum capacity: 50 t
2252 G
2252 R  

38 cm 40 1250
45 cm mm
cm

 2200
1 022520001 mm
1 022520002
2252-O 1 022520003 820 mm
2252-G
2252-R 3027 10 
 90 kg 1 030270010
2252KR4
spare seat castors 3027 20 1250 mm
hydraulic press with moving piston
2252KR4 20 t

2254T Maximum capacity: 20 t
kneeling pad

made from non-slip EVA foam
3027 50 
 350 kg 1 030270050

 1905
1 022520900 mm

3027/KP

set of pin punches and plate
for press item 3027

950 mm

30 mm 3027 20 
 140 kg 1 030270020

290 mm

470 mm 3027 30 
hydraulic press with moving piston and hoist 1 030270510
2254T  3027/KP10 3027 10 1 030270520
1 022540047 Maximum capacity: 30 t 3027/KP20 3027 20 1 030270530
3027/KP30 3027 30 1 030270550
 3027/KP50 3027 50

2258-O 3027/KPP50
heavy duty creeper with tool chest
pedal control for hydraulic press item 3027
20-30-50

1980
mm

475 mm 450 mm
355 mm
2258-O
1150 mm

 3027 30 
1 022580011  230 kg 1 030270030

3027/KPP50 
1 030270555

 165

VEHICLE REPAIR

166 

83 437U/09
half-moon ring wrenches
assortment for repairing damaged threads
M5-M6-M8-M10-M12

88/S7 
8x10-12x14-13x15-16x18- 1 000880107
17x19-21x23-22x24 mm
L

ISO 3318

 L  437C 25 x M5, M6, M8, M10 
mm mm 3 000830008 set for repairing damaged spark plug 10 x M12 1 004370550
3 000830010 threads, M14x1.25 mm
8x10 126 3 000830011 437U/09
10x12 137 3 000830014 • Helicoids height: 8.40 - 12.40 - 16.40 mm (5 pcs/size) M5X0,8
11x13 138 2 000830015 M6X1,0
14x17 183 2 000830016 M8X1,25
15x17 184 2 000830019 M10X1,5
16x18 196 M12X1,75
19x22 231
 370x230x55 mm -  2 Kg

437U/E-M…
stainless steel helicoids

83/S3   H 
11x13-14x17-19x22 mm 1 000830081 1 004370100 mm 1 004370555
83/S5 1 000830085 1 004370556
10x12-11x13-15x17 M5 7.5 1 004370558
16x18-19x22 mm 437C M6 9 1 004370560
M8 12 1 004370562
83AS 437C/... M10 15
half-moon ring wrenches stainless steel helicoids for item 437C M12 18

Prices refer to 25 pieces (10 for size M12 )

H 437U/PM
bits and taps for item 437U/09

L H 
mm 1 004370108
 L  1 004370112 
" mm 2 000830111 8.4 1 004370116 M5 1 004370565
2 000830114 12.4 M6 1 004370566
7/16x1/2 138 2 000830119 16.4 M8 1 004370568
183 M10 1 004370570
9/16x5/8 230 The prices shown are for 10 pieces M12 1 004370572

3/4x7/8 437K/8
tool assortment for repairing
437C/RM14 axle shaft threads
male thread for spark plugs M14x1.25
• Allows original thread to be rectified and dressed.
83AS/3  437C/RM14  Kit contents:
7/16x1/2-9/16x5/8 1 000830181 1 004370124 • Metric sizes:
3/4x7/8 20x1.25 - 20x1.5 - 22x1.00 - 22x1.5 - 24x1.5 - 24x2.00
• Inch sizes:
3/4x20 - 13/16x20

88

double ended flat ring wrenches, extra-long
series

L

 L   32 mm 
mm mm 2 000880008 1 004370020
2 000880012 437K/8
8x10 235 2 000880013  200x110x30 mm  167
12x14 330 2 000880016
13x15 330 2 000880017
16x18 405 2 000880021
17x19 405 2 000880022
21x23 435
22x24 435

437K/16  720TC

tool assortment for repairing impact torsion bars, coloured,
damaged threads on brake caliper brackets for motor vehicle wheel nuts,
M9x1.25 with 1/2" male and female square drives

720LC/S5   L
17-19-21-22-24 mm 1 007200645

720IC L
Nm mm
spare coloured polymeric inserts for impact
sockets 720LC-720LCL 90 200
100 200
437K/16  110 200 
 210x150x50 mm 1 004370016 120 200 1 007200769
135 200 1 007200770
1 007200771
 1 007200772
1 007200773

437K/33 720IC 17  
tool assortment for repairing 720IC 19 mm 1 007200687
damaged spark plug threads 720IC 21 1 007200689
720IC 22 17 1 007200691
Bushes: 720IC 24 1 007200692
M8x1.0 - M10x1.0 - M10x1.25 - M12x1.25 19 1 007200694
Taps:
M8x1.0 - M10x1.0 - M10x1.25 - M12x1.0 - M12x1.25 - M14x1.25 21

22

24

720LCL 720TC/S5 
90-100-110-120-135 Nm 1 007200779
wheel nut impact sockets  260x50x175 mm -  1,35 kg
with coloured polymeric inserts,
955
long series tubular spark-plug wrench
D chrome-plated, hexagon end

150 mm

437K/33  Ø 
 210x150x50 mm 1 004370133 mm mm 1 007200737
1 007200739
17 26,5 1 007200741

19 28,5

21 30,3

720LC L
wheel nut impact sockets,
with coloured polymeric inserts  D


D  DL 
mm - " mm mm 3 009550016
85 mm 3 009550021
16 21 86
Ø 
mm mm 1 007200753 5/8
20,8 29 86
17 26,5
13/16
19 28,5
 720LCL/C3 956C
21 30,3 2 007200637 17-19-21 mm 1/2” square drive spark plug sockets
2 007200639  210x50x150 mm -  1,65 kg chrome-plated, hexagon ends
22 32,4 2 007200641
2 007200642 
24 34,6 2 007200644 Ø

 720MRC
 impact socket
with polymeric insert for Mercedes wheel
screw L

 ISO 11168 
3 009560008
D  ØL 3 009560010
mm - " mm mm 3 009560011
L 3 009560012
14 18,8 70
720LC/C3  Ø L 9/16
17-19-21 mm 1 007200653 16 21,4 70
 148x132x44 mm -  860 g 5/8
mm mm mm   17,8 23,6 70
168  1 007200631 11/16
17 27 85 1/2 20,8 27,0 70
13/16

956E 959 960BT
3/8” square drive spark plug sockets T-handle spark plug wrenches sockets for injector electrical connections
chrome-plated, hexagon ends with swivelling sockets, standard series
 L
 90° 
Ø
Ø

L 50°

ISO 11168 Ø L 
1 009600125
 Ø L Ø L mm mm mm 1 009600127
mm - " mm mm 1 009600129
ISO 11168 25 37,0 78 1 009600130
14 18,8 70 27 39,7 78
9/16  ØL 29 42,0 78
16 21,4 70 3 009560018 mm - " mm mm 30 43,0 78
5/8 3 009560020
17,8 23,6 70 3 009560021 14 18,8 483  960BT/B
11/16 3 009560022 9/16 3 009590009 sockets for injector electrical connections
20,8 27,0 70 16 21,4 483 3 009590010
13/16 5/8 3 009590011
20,8 27,0 527
13/16  L

956F
3/8" square drive spark plug sockets Ø

 959R
Ø
rubber inset and spare spring
 ØL for items 956C - 956E - 957 - 959
mm -" mm mm
Ø L 
14 18,8 70 1 009600128
9/16 mm mm mm
16 20,5 70 29 38,5 77
5/8 
L 959R/14 3 009590223
956C/14-956E/14 3 009590224
 960F
1 009560114 959R/16 3 009590225 socket for nozzle holder ring nuts
1 009560116 956C/16-956E/16 3 009590226
957/16-959/16

959R/17,8
956C/17,8-956E/17,8

959R/20,8
956C/20,8-956E/20,8
957/20,8-959/20,8-959L

956L Ø Ø1 2 1

1/2” square drive spark plug sockets, 960
bi-hex ends, long series 1/2” square drive socket
for Diesel engine injectors
 70 mm
Ø 
L Ø Ø Ø1 1 2
ØL mm mm mm mm
mm - " mm mm  
2 009560214 28,3 22 32 22 1 009600148
14 20,2 250 2 009560216
9/16 2 009560217 L 960G
16 24,0 250 2 009560221
5/8 Ø L  socket for Diesel engine injectors
17,8 24,0 250 2 009600027 of Mercedes-Benz trucks
11/16 mm mm mm
20,8 28,5 250
13/16 27 36,5 77

960A L
1/2” square drive socket
957 for Diesel engine injectors Ø Ø1 
T-handle spark plug wrenches 
with swivelling sockets  Ø Ø1  L
Ø mm mm mm mm 1 009600151
90°
28,5 22 32 122

35° L 960L
socket
Ø L  for nozzle holder ring nuts
2 009600017
mm mm mm 
27 36,5 77
Ø Ø1
Ø L

ISO 11168

 Ø L  L
mm - " mm mm 3 009570000
3 009570001 Ø Ø1 L 
16 21,4 275 1 009600153
mm mm mm
5/8 27,0 275
20,8
30 22 122
13/16

 169

960M 960/22EP 960CMB
socket double head swivel socket wrench
for nozzle holder ring nuts for Lambda probes instrument for controlling compression on
petrol engines
 Double hexagon/bi-hex and 180° joint result in remarkable

Ø Ø1 versatility

L 

Ø Ø1 L 
mm mm mm 1 009600154

28,5 22 72

960H/C4 L
set of sockets for nozzle holder ring nuts

L   Bar 
mm mm mm 1 009600052 1 009600250
4÷17
300 22 22
 440x370x100 mm -  2,2 kg

960M 960L 960AVE 960CMB/R2
960F 960G spare cards for item 960CMB
device for testing common rail diesel electrical
 injectors
1 009600152
960H/C4

960S 960CMB/R2 
1/2” square drive socket 1 009600252
for Diesel engine injectors
960CMD

Ø instrument for controlling compression
on Diesel engines
L

Ø L 
1 009600022
mm mm mm
22 30 82

960SL 960AVE 
 430x310x50 mm -  2,0 kg 1 009600245
sockets for Lambda probes

with 1/2” female square drives
Ø

L 960K/AVE2
kit of adaptors for item 960AVE
Ø 
2 009600085
mm 2 009600110
33
960SL85
 22xL= 85 mm

960SL110 33 (included in item 960AVE)
 22xL= 110 mm
Bar 
1 009600270
8÷40

 440x370x100 mm -  2,4 kg

960SN 960CMD/R1
Diesel engine glow plug wrenches spare cards for item 960CMD

 L
Ø

Ø L 

mm mm  mm 2 009600834
2 009600835
8 12,0 1/4 60 2 009600836
9 13,3 1/4 60 2 009600837
10 14,5 3/8 70 2 009600838 
11 15,8 3/8 70 960AVE2/K 1 009600249
 250x150x30 mm -  523 g 
12 17,0 3/8 70 960CMD/R1 1 009600271

170 

960EPC 960KC-M8/M9/M10 960P
Set of tools for removing glow plug electrode assortment of tools for removing
broken or damaged glow plugs pressure/depressure tester
with accessories and adaptors
• For spark plugs with threads M8-M9-M10

960P 
 350x320x95 mm -  1,9 kg 1 009600777

ZONA DI ROTTURA

960EPC  960KC-M8/9/10  960PI
 270x230x80 mm -  900 g 1 009600790  380x290x50 mm -  2,3 kg 1 009600801 assortment of reamers for cleaning injector
seats
960E-PI/P 960KPC in plastic case
injector washer extractor reversible impulse extractor with adjustable
torque for glow plugs For removing residues from injector seats
• Male thread M10 for use
with sliding hammer (Beta 1540) Torque can be adjusted in 4 positions: - Flat reamer, Ø 19 - 15 mm, for universal injectors
10-20-30-40 Nm
- Flat reamer, Ø 17 - 17 mm, for Delphi/Bosch injectors (BMW/

PSA/Renault/Ford)

- Flat reamer, Ø 19 - 17 mm, for Bosch injectors (Mercedes

CDI).

- Angled reamer, Ø 21 - 17 mm, for Fiat/Iveco injectors.

- Handle

mm

960E-PI/P  Ø 
 300x90x60 mm 1 009600706 1 009600215
960PI
  250x130x50 mm -  600 g
1 009600780
960KPC
960KC-M8  8-9-10-11-12 mm
assortment of tools for removing broken or  420x185x60 mm -  2,8 kg
damaged glow plugs M8
960UC
• For glow plugs with thread M8x1.0 mm
• Allows broken glow plugs stuck in head to be easily tool set for removing stuck M8-M9-M10 glow
removed plugs with deformed tips

960KC-M8 
 400x300x60 mm -  1,5 kg 1 009600800

960UC 
1 009600900

 171

960PI/P 961D

assortment of 14 special tools and reamers Digital electronic videoscope with 5.5 mm
for cleaning injector seats probe

• Allows individual still images and video clips to be recorded and
played back directly on tool

960PMC

Diesel injector test and calibrating
hand pump

Assortment contents: 360 • Probe with head Ø 5.5 mm and length 90 cm
• 3 flat reamers, ø 19/15 mm - ø 17/17 mm - ø 19/17 mm mm • LCD TFT display, 7" (18 cm), with resolution 800x480
• 2 angled reamers, ø 21/17 mm - ø 17/17 mm • digital camera with front and side view
• injector washer pulling tool • "Cfast"-type probe connection
• cutter cleaning brushes • image repetition frequency: 15 frames per second
• injector cleaning brush • 2x digital zoom
• handle and cutter accessories • micro-USB connector for uploading images
• micro-HDMI video output
960PI/P  • Micro-SD card input
 373x280x61 mm -  2,5 kg 1 009600216 • Micro-USB input
• power supply allows unit to be used while battery is charging
Bar Max.  • microphone and speaker for adding and listening to voice
1 009600200 annotations while recording/playing back
400 • Wi-Fi connection
960PI/S
kit for cleaning injector seats 960AVL 961D 
vapour extractor  400x340x85 mm -  2,6 kg 1 009610500
Kit contents:
• 3 steel brushes, Ø 18, 22, 25 mm, for cleaning injector seats 961D/CF3,8
• 2 brushes, Ø 14 and 16 mm, for cleaning injector seat bottoms
• 6 caps for closing hole connecting with combustion chamber 1-m probe with 3.8-mm front camera
• 1 brush for cleaning hole connecting with combustion chamber for videoscope item 961D
• 1 flexible bit holder with handle

 370 mm

375 961D/CF3,8 
mm 1 009610511

400 961D/DC8,5
mm
1-m probe with dual UV camera
for videoscope item 961D

960PI/S  Bar Max.  Ø 8,5 mm
 360x140x50 mm -  700 g 1 009600214 1 009600210 
6
1 009610513
961D/DC8,5

960RPI 960AD/TP2
blowing tool for injectors seat cleaning
set of adaptors for item 960TP
for M8x1 - M9x1 - M10x1 - M10x1.25 glow plugs in plastic case

 960AD/TP2 
1 009600940  430x310x50 mm -  3,2 kg 1 009600510

960RPI

172 

961P6 964 969B
pry bar with pointed and leverage ends hub nut locking socket
electronic videoscope
with flexible probe

A

L

LA 
mm mm
5 009640001
400 46

Ø

965 L
pry bars with flat curved ends

Ø L 
1 009690124
mm mm mm 1 009690127
1 009690130
24 36,0 76 1 009690131
27 36,0 76 1 009690132
L1 30 40,0 76 1 009690134
• Supports SD cards (8 GB) A 31 42,0 76 1 009690135
• Supports flash memories (8 GB) 32 42,5 76 1 009690136
• Internal memory: 128M L 34 45,0 76
• TV-OUT feature 35 46,0 76
• Supports video formats (MP4, AVI, 3GP) L A L1 36 49,0 76
• 4 LEDs mm mm mm
• Power supplied by USB port (built-in battery)  969/C5
300 16 185 2 009650013 set of 5 hub nut locking sockets
SPECIFICATIONS 450 20 312 2 009650014 in plastic case
• Sensor pixels: 640x480 600 20 462 2 009650016
• Maximum resolution: 320x240 
• Probe length: 1 m
• Camera diameter: 6 mm
• Video formats: MPEG4, 3GP, AVI,ASF.
• Photo formats: JPEG
• Shooting angle: 0÷180°
• Data output: USB cable and SD card
• Power supply: 3.7V 2000 mAh battery

961P6 
1 009610000

961P6/S 965/S3 
flexible probes, 6 mm 1 009650019

L 966/C3

set of 3 levers with articulated, flat, curved 
heads 1 009690201

969/C5 30-32-34-35-36

 969B

L  970EA
mm 1 009610262 impact sockets for axle nuts
1 009610263
961P6/S2 2000 
961P6/S3 3000 L

962 Ø 
tyre levers
A 966/C3 
LA  L=200-250-300 mm 1 009660103
mm mm  355x140x65 mm -  1,8 kg
L 5 009620003
300 21 5 009620004 720LS
400 25 3 009620005 impact sockets,  Ø 
500 27 3 009620006 1 009700398
600 27 long, slim series mm mm mm
 98 36 122

963 Ø Ø1
pry bar with pointed and flat bent ends 

A L 2 007200386
L UNI/ISO 2725
LA
mm mm   Ø L Ø1
5 009630001 mm mm mm mm
400 23
720LS 36 36 48,0 78 29

 173

970EB 970OT 971/C8
impact sockets for axle nuts oval impact sockets for locking trailer hub nuts
torque screwdriver with accessories
 L1 for controlled tightening of
tyre valves with pressure control system
Ø

L

 Ø 
1 009700595
mm mm mm 1 009700410

95 36 126
110 36 133

970Q L L1  971/C8 
impact sockets for rectangular nuts 1 009700165 1 009710108
mm mm - 1 009700180
 65 61 3/4" 1 009700196
80 73 3/4" 1 009700211 1,2÷6 Nm
L 583/6
96 90 3/4"
111 104 41 mm 892/0
T10-T15-T20
 862TX 11-12 mm
 900L

986 78

971TSP 978 - 979
tyre pressure sensor tool four-way hexagon wheel nut wrenches

L 
mm  1 009700756
1 009700760
56 3/4"
60 3/4"

970B 
socket for locking Fiat Daily hub nuts 

 375 mm

SPECIFICATIONS
Ø • reading of TPMS sensor information, including:
sensor ID
inflation pressure UNI/ISO 6788 DIN 3119
temperature
L battery state
• sensor activation
Ø L  • universal sensor programming
1 009700010
mm mm mm The tool has a database which supports repair operations,
65 88 75 including:
• driving torques 
• codes of original spare parts and compatible universal sensors 978 2 009780001
 17x19x21x22 mm 2 009790001
970C 979
octagonal impact sockets for locking hub nuts  17x19x22x1/2 mm

971TSP  982
63x142x30 mm 1 009710025 four-way hexagon wheel nut wrench




700 mm

  UNI/ISO 6788 DIN 3119 
mm  -  1 009700808  24x27x32x3/4 mm 1 009820001
1 009700815
80 41 mm 1 009700820
95 3/4" 1 009700829
100 3/4" 1 009700835
109 41 mm 1 009700840
115 3/4"
120 41 mm

174 

984 986 48 988/K4
wheel nut plastic cap pliers tyre valve screwdriver, set of 4 scratchproof plastic flat chisels
short model

automatic valve retention

H L
L L1

LH A
mm mm
 988/K4 
195 4 1 009840005 A= 19-21-25-38 mm 1 009880104

985/B7 L L1  989
assortment of 7 guide pins mm mm 1 009860048 wheel balancing weight tool
for wheel installation
18 48
Included sizes:
• M12X1.25 male 986 78
• M12x1.25 female tyre valve screwdriver
• M12x1.5 male
• M12x1.5 female automatic valve retention
• M14x1.25 male
• M14x1.5 male
• M16x1.5 male

L L 
L1 2 009890001
L
mm 
1 013020001
250

985/B7  L L1 1302 1 013030001
1 009850007 mm mm double end dolly, round,
convex pein head
18 78
135 mm
987
985M tyre valve lever 
male guide pins for wheel installation with rubber protection 1 009860078



g

770

L 1303
curved dolly
L 137 mm

985M M12X1,25 L  L g
985M M12X1,50 mm 1 009850101 mm  
985M M14X1,25 1 009850102 1350
985M M14X1,50 150 1 009850103 310 1 009870001
985M M16X1,50 150 1 009850104 1304
150 1 009850105 987P sole dolly
150 tyre valve lever
150 made of plastic

985F Handle accommodates screwdriver to work on
female guide pins for wheel installation mechanism inside valve

107 mm
LL

985F M12X1,25 L  L   
985F M12X1,50 mm 1 009850106 1 009870011 1 013040001
1 009850107 mm g
150  175
150 335 875

1305 1309 1326
toe dolly hatchet dolly curved angle spoon

118 mm 260 mm

122 mm

   
g 1 013090001 1 013260001
g
 460
g 560
1310
1190  general purpose dolly
1 013050001
1305Z
milled toe dolly 1327
heavy-duty spoon
122 mm
76 mm

385 mm

   
g 1 013100001 1 013270001
g
1225
1075
1312
  anvil dolly 1328
g 1 013050002 pry and bumping spoon

1065 100 mm

1306
heel dolly

280 mm

82 mm

   
g 1 013120001 g 1 013280001

  1220 935
g 1 013060001
1313 1329
1040 buffer dolly double-ended spoon

1307 68 mm
regular dolly

90 mm

435 mm

   
g g  1 013290001
g
1100 990 1 013130001
1800
1308 1314
egg dolly  double end dolly, convex, flat head
1 013070001

1330
long double-ended spoon

56 mm

115 mm

510 mm

     
g 1 013080001 1 013140001 1 013300001
g g
1100
760 2125
176 

1331 1338R9 - 1338R12 1344
bending iron with leather face spare body blades for item 1338A-B
feeler gauges for car body repair shops, pair,
10-bladed, with suction cup

410 mm 1338R9 /1”  suitable for:
1338R12 2 013380004 • fitting rear windows
 9 2 013380005 • maintaining position during installation
g 12

1100  1342 1344 1 013440010
1 013310001 extra flat chisel with straight cutter
1335BM 1345
bumping blade 26 L 7 hammer with round,
with plastic handle mm mm convex face and pein, wooden shaft

L  160 mm
mm 5 013420001 40
mm
235 L
320
375 mm 1342PM mm

 extra flat chisel with straight cutter 
g  with hand guard 1345 2 013450010

500 2 013350010 L1 1351
L hammer with round,
1337/S5 flat face and ball pein, wooden shaft
set of 5 stopping knives for car repairers, 
made of stainless steel 2 013420002

Japanese type
(25-50-75-100-125 mm)

L L1
mm mm

235 118

1342PMR
spare hand guard for item 1342

L

L 
1 013370015
mm

25-50-75-100-125

1338A - 1338B 160 mm

adjustable body blade holder 1342PMR  40
with flexible flat blades 1 013420003 mm
1343
flat chisel with side cutter L
320
mm

L 26 L 11 
mm mm 1351 2 013510010
L 
2 013380001 46 mm  1353
/1” mm 2 013380002 5 013430001 hammer with round,
L flat face and point pein, wooden shaft
mm

200

1338A 9 360
1338B 12 360

1338 135 mm
body blade holder for item 1338R

40
mm

L
320
mm

 
1338 2 013380003 1353 2 013530010

 177

1357Z/45 1365/K13 1366KF
hammers with flat, round, oil pressure pump, 10 t, and bodywork
milled face and square, accessories kit kit of 19 plastic glue tabs
smooth face, wooden shafts in trolley for item 1366A

102 mm 40 Kit contents: 1366KF 
mm • oil pressure pump, 10 t, with 1.5-m-long hose, 1/2" coupling 1 013660205
34x37 • piston
mm  • wing opening pliers; capacity: 500 kg
2 013570045 • baseplate, 150x90 mm
L • L-shaped base, 50x50 mm
280 • 4-point punch
mm • round, knurled punch, Ø 50 mm
• wedge-shaped punch, 43 mm
1357Z/45 • 240-mm-long extension
• 450-mm-long extension
1359T • 475-mm-long extension
hammer with round, • rubber head
flat face and horizontal pein, • male-to-male coupling for installing accessories
wooden shaft
1366/K5
pneumatic dent puller, with 1.1 kg hammer
face

Kit contents:
• 1 suction cup Ø 75 mm
• 1 suction cup Ø 100 mm
• 1 suction cup Ø 125 mm
• 1 hook

32 110 mm 
mm 1 013650013
27
L mm
280
mm 1365/K13
 900x420x180 mm

1359 T  1365P10 1366/K5 
2 013590010 oil pressure pump  610x240x90 mm 1 013660010

1.5-m-long hose, 1/2" coupling 1367/S6
set of punches for installing
1360/K6 parking sensors
aluminium hammer with flat, round face,
interchangeable plastic pins and punch sizes:
17 - 18 - 19- 20 - 21 - 22 mm
supplied with:
• 4 plastic pins
• 1 punch, adjustable in 2 different lengths,
applicable to hammer

Ø

L 
1 013650110
1365P10

LØ  1366A 1367/S6 
mm mm 1 013600006 1 013670100
dent puller 1367
320 34 with kit of 19 plastic glue tabs punches for installing
parking sensors
1362 ideal for removing:
dent reflector • hail dents
with suction cup • dents caused by doors
• small dents in general
allows even the smallest

bodywork imperfections to be detected

LxH  1366A  Ø Ø
mm 1 013620010 1 013660200 mm 

1362 240 x200 17 1 013670117
18 1 013670118
178  19 1 013670119
20 1 013670120
21 1 013670121
22 1 013670122

1368 1368G/C2U 1437/C12
plastic repair kit concave angle clips for item 1368 assortment of 12 tools for removing air bags

• Allows cracked and broken plastic parts to be quickly fixed 1368G/C2U 
The prices shown are for 100 pieces 1 013680130
Power supply: 220÷240 V with Schuko socket
Heat gun cable length: 3.5 m
Power supply cable length: 1.35 m
2 power adjustments: 35-75 W
Heat gun with brass terminals, 2 staple insertion angles:
0°-90°
Input protection: thermal circuit breaker
Output protection: 10 A fuse
Metal gun pocket

1369/C11
assortment of 11 tools

1437/C12 
 260x160x55 mm -  1,0 kg 1 014370001

1438

universal clutch aligner complete
with 3 expansion mandrels

1368 
1 013680001
1368G/K400
assortment of 400 clips 1369/C11 
for item 1368 1 013690033
1303
1368G/K400  1305
1 013680140 1306
1309
1368G/OD 1310
corrugated clips, straight, for item 1368 1314
1327
1338A
1353
1357Z/40
1390
 470x340x70 mm -  15,2 kg

1438 
1 014380001
1438R
 1428L spare expansion mandrels
1 013680100 for item 1438
socket pullers, long series, for damaged right-
hand nuts, with square drive

1368G/OD 
The prices shown are for 100 pieces

120 mm

1368G/SD Ø
spiral clips, straight, for item 1368

  Ø 
mm 1 014280217 mm 5 014380101
1 014280219 5 014380102
17 1 014280221 14÷18 5 014380103
19
21 18÷21

 22÷25

1368G/SD  1438DSG
The prices shown are for 100 pieces 1 013680110
lever for locking/unlocking DSG dual-clutch
1368G/CV gearbox
convex angle clips for item 1368 from VAG group

1368G/CV  1428L/B3  
The prices shown are for 100 pieces 1 013680120 17-19-21 mm 1 014280303 1 014380200

1438DSG  179

1438 SAC 1445/1 - 1445/2 1455SVP
SAC clutch aligning kit piston ring expanders pneumatic valve grinder

includes kit for applications without guide bearings • Pressure: 6 bars
supplied with 3 and 4 arm plates

90 mm

250 mm

1445/1   Ø ØØ 
1445/2 Ø mm 1 014450001 39 mm 34 mm 22 mm 1 014550001
1 014450002
50÷100 1455SVP
90÷150

 1450GC 1455SVP/R...
1 014380050 spare parts for item 1455SVP
valve spring compressor
with straight and offset jaws

1438 SAC 205 mm
 480x380x130 mm -  9,5 kg

1439/K7 45÷225
mm
angular screwdriver (90°), long series,
with blades, in case ØØ Ø

300 22 mm 34 mm 39 mm

mm 1455SVP/R1 1455SVP/R2 1455SVP/R3

1455SVP/R1 
1455SVP/R2 5 014550501
1455SVP/R3 5 014550502
5 014550503

1450GC  1458
1 014500005 external butt-ended circlip pliers



Case contents: 1452K
- Angular screwdriver
- 1 slotted screw head valve spring compressor,
- 1 1/4" bit head with three flanges
- Special blade head
- 7 special blades  200 mm
1 014390101
1439K7 DIN 5417
 500x120x60 mm  825 g 235 
mm  2 014580001
1440/... Ø mm
piston ring compressors 1452K 
30÷100 1 014600010

ØØ 1460F
30 mm 21 mm valve seat removing tool

Ø
38 mm
75÷190 mm
270 mm


1 014520100

270 mm

1452PN/K 1460F
pneumatic tool for engine valve springs

Thrust pressure: 1400 N

L

 L  Ø L1
Ø mm mm 1 014400000 
1440/0 1 014400010 Ø L L1
1440/1 40÷75 50 1 014400011 mm mm 1 014520110
1440/1A 57÷125 80 1 014400020 mm
1440/2 57÷125 100 1 014400021 230 185
1440/2A 90÷175 80 1 014400030 16-19-23
1440/3 90÷175 100
90÷175 165 25-30-42

180 

1461/C3B 1461/C6G 1461/C8G
timing devices for timing devices for timing devices for Ford/Mazda diesel engines
Fiat/Alfa/Lancia petrol engines Peugeot/Citroën diesel engines
Engines: 1.4-1.6-1.8-2.0-2.2 TDCi, 1.6D 8/16V, 1.8D,
Engines: 1.2-1.4 16V Engines: 1.4-1.6-2.0D,1.4-1.6TDCI, 1.4-1.6-2.0-2.2Hdi, 1.8D Turbo, 1.8 TCi, 1.8 TDDi, 2.5D, 2.5D Turbo
1.5-1.9-2.5D

1461/C3B   1461/C8G 
 280x245x75 mm  1,5 kg 1 014610032 1 014610064  280x245x75 mm  2,2 kg 1 014610084

1461/C6G
 385x290x100 mm  3,8 kg

1461/C5G 1461/C7B 1461/C9B
timing devices for Fiat/Alfa/Lancia/Opel/ timing devices for timing devices for Opel petrol engines
Suzuki/Ford Renault/Nissan petrol engines
diesel engines Engines: 1.0 12V, 1.0-1.2-1.4 16V
Engines: 1.4-1.6-1.8-2.0 16V
Engines: 1.3 Multijet

1461/C5G   1461/C9B 
 280x245x75 mm  2,6 kg 1 014610053 1 014610072  335x145x60 mm  2 kg 1 014610092

1461/C7B
 280x245x75 mm  3,2 kg

1461/C6B 1461/C8B 1461/C10A
timing devices for timing devices for Ford petrol engines timing devices for
Peugeot/Citroën petrol engines Audi, Seat, Skoda and Volkswagen engines

Engines: 1.0-1.1-1.4-1.6-1.6 16v-1.6Gti-1.6 18V-1.8-1.8 16v-1.9- Engines: 1.9 - 2.0 TDI
2.0-2.0 16v-2.0T-2.0 Hpi-2.2 16v
Engines: 1.25-1.4-1.6-1.6 SCTi-1.6 Ti-VCT-1.6 16V

1461/C6B  1461/C8B  1461/C10A 
 310x290x120 mm  3,5 kg 1 014610063  240x210x50 mm  1,8 kg 1 014610083  270x120x45 mm -  1,1 kg 1 014610101

 181

1461/C10G 1461/C13B
timing devices for timing devices for Fiat 1.4 Multiair engines
Volkswagen/Audi/Seat and Skoda engines

Engines: 1.2-1.6-2.0 TDI CR (common rail)

1461/C12A
timing devices for
Fiat engines

Engines: 1.9-2.2 JTS and 1.9 JTD Euro 4

1461/C13B 
 240x210x50 mm  2,8 kg 1 014610134

1461/C10G   1461/C16
 310x290x120 mm  2,8 kg 1 014610103 1 014610123 timing devices for
BMW 2.0-3.0 diesel engines
1461/C11A 1461/C12A complete with pump puller
timing devices for  280x245x75 mm -  1,8 kg
Renault engines Engines: 2.0-3.0 diesel

Engines: 2.0 dCi 1461/C12G 1461/C16 
timing devices for  335x145x60 mm -  4,3 kg 1 014610160
1461/C11A Fiat/Alfa/Lancia diesel engines
 420x280x60 mm -  1,2 kg
Engines: 1.9 JTD, 1.6-1.9-2.0 Multijet
1461/C11G
timing devices for 
Renault engines 1 014610111

Engines: 1.5-1.9-2.2-2.5 DCI 1461/C17

1461/C11G timing devices for
 310x290x120 mm  3,8 kg Volkswagen, Seat and Skoda engines

Engines: 1.2 6-12V

1461/C12G 
 280x245x75 mm  2 kg 1 014610124

1461/C13A 
1 014610170
timing devices for Fiat 0.9 Twinair turbo
engines

1461/C17
 142x102x40 mm -  1,5 kg


1 014610113

1461/C13A 
 240x210x50 mm  1,7 kg 1 014610133

182 

1461/C17B 1461/C20G 1461/C23B
timing devices for timing devices for timing devices for Opel petrol engines
Volkswagen/Audi/Seat and Skoda petrol Fiat Iveco/Peugeot/Citroën/Ford diesel
engines engines Engines: 1.0 - 1.2 - 1.4 ecoflex

Engines: 1.2 TSI Engines: 2.2-2.3-3.0 Multijet

1461/C17B 
1 014610171

1461/C18B  1461/C23B 
timing devices for 1 014610221  280x245x75 mm  2,5 kg 1 014610224
Volkswagen/Audi/Seat and Skoda petrol
engines 1461/C20G
 385x290x100 mm  5,5 kg
Engines: 1.6-1.8-1.8T, 1.4-1.6-1.8-2.0 16V,
1.4-1.6-2.0 FSI

1461/C21G 1461/C24B
timing devices for Renault diesel engines timing devices for Mini-Peugeot/Citroën petrol
engines
Engines: 1.6 dCi
Engines: 1.4 - 1.6 (N12-N14)

1461/C18B 
 310x290x120 mm  2,5 kg 1 014610182

1461/C19 1461/C21G  1461/C24B 
timing devices for  310x290x120 mm  3 kg 1 014610222  280x245x75 mm  2,8 kg 1 014610225
Ford Duratorq engines
1461/C22B 1461/C25G
Engines: 2.0-2.2-2.4 DIESEL timing devices for Peugeot/Citroën petrol timing devices for Mini diesel engines
engines
1461/C19 Engines: 1.6 diesel (W16D)
 420x185x60 mm -  1,5 kg Engines: 1.0-1.2 VTi


1 014610190

1461/C22B  1461/C25G 
 280x245x75 mm  2 kg 1 014610223  270x120x45 mm  1 kg 1 014610226

 183

1461/C26B 1461/C29B 1462CF/C6
timing devices for Fiat/Alfa Romeo/Lancia timing devices for set of 6 single-ended bi-hex wrenches
petrol engines Ford petrol engines for fuel injector connectors

Engines: 1.2-1.4 8v engines: 1.0 EcoBoost sizes:

12-14-16-17-18-19 mm


1462CF/C6 
 260x145x60 mm 1 014620006

 1461/C29B  1462CF
1 014610227  280x245x75 mm -  2,6 kg 1 014610209 single-ended bi-hex wrenches
for fuel injector connectors
1461/C26B
 280x245x75 mm  1,7 kg 

1461/C27G 1461/C30G
timing devices for Bmw diesel engines timing devices for 
Volkswagen/Audi/Seat and Skoda diesel mm  
Engines: 1.6-2.0D (N47-N47S) engines
12 1 014620012
engines: 1.6-2.0 CR TDI 14 1 014620014
16 1 014620016
for engines built as from 2012 17 1 014620017
19 1 014620019
18 1 014620018

1462/KD

tool assortment for removing Denso injectors,
complete with hammer

1461/C27G  
 280x245x75 mm  2 kg 1 014610228 1 014610231

1461/C30G
 280x245x75 mm -  2 kg

1461/C28B 1462/KD 
timing devices for  335x210x80 mm -  4,8 kg 1 014620060
Volkswagen, Seat and Skoda petrol engines
1462/KI
engines: 1.0 - 1.0 Bluemotion Tech assortment of common rail diesel injector
1.0 Ecofuel/Ecomotive - 1.0 Green Tech pullers

Allows DELPHI-BOSCH-SIEMENS-DENSO injectors to be
removed

1461/C28B  1462/KI 
 280x245x75 mm -  1,7 kg 1 014610229  530x470x140 mm -  20 kg 1 014620235

184 

1462/KMRC 1462AD/SMN 1464AP
tool assortment for removing injectors adapter kit for removing set for testing high pressure system in
from Mercedes 2.1L, 2.2L, 3.0 V6 and Siemens and Denso injectors common rail diesel engines,
Chrysler engines with item 1464T
For use with item Beta 960KI/1462KI
For Bosch (2.1 and 2.2L) and Delphi (3.0) injectors Complete with:
Injectors can be removed - high pressure pipe set
without removing engine. - fittings
Particularly suitable for following car models: - 2,000 bar sensor
Mercedes Vito, Vario, CLK, Sprinter, Viano,
M,GL,C,GLK,E,CLS,S,R,G Classes
Chrysler 300 C

1462AD/SMN 
1 014620436

1462PIM 1464AP 
injector maintenance 1 014640450
plates, pair

vice locking

sections:

Ø 11-12-13-14-16-19-20 mm

1462/KMRC  1464APB
 310x300x118 mm -  3,5 kg 1 014620070 set for testing high pressure
system in FSI petrol engines,
 for use with item 1464T
1 014620502
comes with 200 bar sensor
and connectors

1462/KU 1462PIM

universal tool assortment for removing 1463/KIT
diesel common rail injectors valve timing system pulley locking kit

Complete with pliers and hammer

1464APB 
1 014640500

1463/KIT  1464IC
 280x140x75 mm -  1,2 kg 1 014630001 complete set of dummy injectors and dummy
glow plugs for item 1464T

Makes it possible to connect to the engine to check compression
in diesel engines
with digital tester 1464T.

1462/KU 
 390x290x100 mm -  4,5 kg 1 014620100

1462AD/BSC 1464T
adapter for removing digital pressure and compression tester
Bosch common rail injectors
SPECIFICATIONS
For use with items Beta 960KI and Beta 1462/KU • 5" touch screen display
• rechargeable polymer lithium battery
• complete with 80 bar sensor (for low pressure) and USB cable



Contents:
• 22 dummy glow plugs
• 5 dummy injectors
• 1 universal dummy injector kit for trucks, marine engines and
agricultural machines

1462AD/BSC  1464T  1464IC 
1 014620435 1 014640050 1 014640350

 185

1464PF 1466/C5 1467LF
kit of 5 brake
set for testing bleeding wrenches electric instrument for
pressure in braking brake fluid replacement
system, kit contents:
for use with item 1464T With "pulsating effect"
• 5 wrenches sizes 7-8-9-10-11 mm
comes with adapters
and connectors • 1 drain hose with check valve

1466/C5 
 260x170x50 mm 1 014660100

"Pulsating effect"

1464PF  1467 • Automatically stops when tank is empty,
1 014640650 brake fluid extractor thereby preventing air from being let in
1464PT • Maximum tank volume: 20 l
set for testing • Operating pressure: 0.4÷3.5 bar 
turbo pressure, • Power supply: 230V 1 014670100
for use with item 1464T Supplied with:
• Brake oil recovery tank
comes with sensor • 1 universal cap + 1 standard cap E20
and connecting cable
1467LF

1467LF/RC
vessel with recovery tube for item 1467LF

Pressure: min 5 bar, max 11.5 bar 
1 014670001
l

1467 1,5

1467/RK1
spare tube kit for item 1467

1464PT  
1 014640550 1 014670125
1464TDI
set for testing  1467LF RC
pump pressure 1 014670501
in TDI engines, 1467/RK1
for use with item 1464T 1468N
1467/RK2 valve depressors for disc removal
comes with connector spare filler for item 1467

230 mm

1468/N1

245 mm

1468/N2

 180 mm
1 014670502
1467/RK2

1468/N3

1464TDI  1468N/1 
1 014640600 1468N/2 1 014680011
186  1468N/3 1 014680012
1 014680013

1470 1471M/50 1471PN/B3
drum brake spring pliers pneumatic tool for pushing back and BMW handbrake adapter
rotating right and left disc brake pistons with
L accessories Ø 6 mm

L Ø Ø 32 mm
mm  
1471PN/B3 
210 1 014700001 1 014710083
330 1 014700002 1471PN/B4
540 1 014700010 BMW handbrake adapter

1470FT Ø 
drum brake shoe spring clamp pliers 1 014710069
mm Kg Bar
40° angled noses 50 150 5÷8
Easy access to awkward spaces Ø 5 mm

L Ø 28 mm
L
mm   1471M/P
worn pad and TRW-Mégane caliper adapters
184 1 014700000
1471PN/B4 
1471 1 014710084
drum brake spring pliers
1471PN/B5
Mini/ BMW handbrake adapter

L 1471M/P  Ø 5 mm
L 1 014710080 Ø 19 mm
mm  
1471M/W50
330 1 014710001 VW Passat handbrake adapter (≥ 2005)

1471A 1471PN/B5 
handbrake wire pliers 1 014710085

A Ø 5 mm 1471CF
Ø 30 mm pentagon hand sockets for brake caliper nuts

B B 220 mm 1471M/W50  
mm  1 014710079
A max 1471PN/B1
mm 5 2 014710010 Ford handbrake adapter

45

1471M/C22 mm  
14 1 014710314
pneumatic tool for pushing back 19 1 014710319
and rotating right and left disc
brake pistons with accessories 1471CM
pentagon socket driver for brake caliper
10 mm screws

1471PN/B1  
1 014710081
1471PN/B2
Daily handbrake adapter

Ø 8 mm

Ø 30 mm

1471M/C22  mm  
 350x310x85 mm -  3,5 kg 1 014710101 10 1 014710360

1471PN/B2   187
1 014710082

1471CM/E11 1472AU/P 1472FCL/RP
spare cable for pliers 1472FC/L
hexagon socket driver, 11 mm, automatic hose ring pliers
for Mercedes ML brake caliper screws (series with extension
166)

 L

Ø
L1
L
Ø L L1 Ø  1472FCL/RP 
mm mm mm mm L 1 014720105 1 014720096
mm mm 1472FCA
11 24 75 15,5  collar removal pliers
1 014710361 18÷54 630 with Visa ® type rack

1471D2 1472R/AU
tool for pushing back front disc brake pistons, spare tips for pliers 1472AU
with closed callipers

Two pairs of plates for working on 2 and 4 piston callipers

  140 mm

1472AU/R 1 014720101

1472AU/RP 1472FCA 
spare cable for pliers 1472AU/P 1 014720041

1472TM
quick coupler pliers for multijet filters

  1472AUP/R  230 mm
mm 1 014710301 1 014720106

10 220 mm 1472FC 1472TM 
 250x170x60 mm  1,5 kg Clic® collar pliers with swivel heads 1 014720200

1472
hose clamp pliers

1472VW
hose clamp pliers,
with swivel heads

For Volkswagen and Mercedes cars

210 mm

1472FC 
1 014720090

1472 
1 014720001
1472AU
automatic hose clamp pliers 1472FC/L 200 mm
Clic® collar pliers with flexible extension

1472VW 1 014720051

1473
OETIKER® collar pliers

275 mm 275 mm

L

Ø  L  1473 275 
mm 1 014720100 1 014720095 1 014730001
630 mm
18÷53

188 

1473A 1473T 1474DL
slotholder pliers for OETIKER® collars steel collar cutting nippers spark-plug pliers, long nose,
double layer PVC coated handles
230 mm allows collars to be cut
without risking damaging guards, sleeves etc. 170 mm
Ø 12 mm
L
275 mm
A

1474DL 
1 014740015
1474G
1473A  A Max L  curved long nose pliers
1 014730010 mm 1 014730582 for removing glow plug caps
mm
220 235 mm
14

1473Q 1474/C4
OETIKER® collar pliers with drive
kit of 4 tools for removing Volkswagen spark
For use with: plug coils
• torque wrenches
• ratchets

• male drives

1474G 
1 014740200

250 mm

1474/C4  1475U
 290x190x50 mm -  1 kg 1 014740100
combination pliers,
 bright chrome-plated,
1 014730005 double layer PVC coated gun handles

1473Q

1474E/VW 125 mm

1473P expansion puller for ignition coils,
clamp pliers for OETIKER® low-profile collars Volkswagen group

A 180 mm 
210 mm 1 014750010
1475U

1476
adjustable self-locking pliers
for exhaust pipe cutting

1474E/VW 
1 014740120

1473P A Max  1474L Ø
mm 1 014730020 spark-plug pliers, curved long nose, 15° 250 mm

53

1473FN 50 mm
tool for tightening and cutting
strap ties made of stainless steel Ø min Ø max 
mm 1 014760001
For use with Panduit® ties and the like mm
75
19

290 mm

1476/RC
spare chain for item 1476

Ø ØE
min

A  Ø min ØE  1476RC 
1 014730501 mm 2 014740010 1 014760010
A mm mm
20  189
4,7÷9,5 14

1476A 1476T 1477K/7
pliers for exhaust pipe cutting
wrench for removing/installing turbines kit with bent reversible ratcheting wrench
on Volkswagen Audi diesel engines and bits

Ø  L
230 mm 

Ø min Ø max  105 mm
mm 1 014760005
mm
95
30

  - 2 TORX T40-T45 bits
1 014760200 - 1 XZN 10 bit
mm - 1 hexagon bit, 8 mm
- 3 bi-hex bits, 10-12-13 mm
12

1476A/RC 1477/C10
spare chain for item 1476A bent wrench with 9 bits
for belt tightening nuts
1477K/7 L 
1 bent wrench with bit drive mm 1 014770051
4 double bi-hex bits: 12x14 - 13x15 - 16x17 - 18x19 mm
5 bits for Torx(R) head screws: E10 - E12 - E14 - E16 - E18 250

1476A/RC  1478
1 014760015 pin removing pliers

1476C/1 
exhaust pipe expanders 

 L1 Ø 265 mm
16 mm L

1477/C10  1478 1 014780001
 530x110x55 mm 1 014770310
1478T
1476C/1  plastic pin removable pliers
Ø 30÷42 mm 1 014760101 with swivel head and pressure clips
L = 131 mm
L1 = 51 mm 1477D Head can be rotated 90°
ring wrenches for belt tightening nuts 240 mm

1476GT 

pliers for removing rubber supports
from exhaust pipes

A L 555 mm S
 
  1478T S
L A Max  1 014760050 mm   mm 1 014780101
mm mm mm
13 1 014770113 4,5
280 58 3 15 1 014770115
16 1 014770116
1476PSA 17 1 014770117 1478/3P
exhaust collar pliers 19 1 014770119
with pin, PSA group plastic pin removal pliers
1477D/S5 with 3 release points
Nose shape and automatic rack locking set of 5 ring wrenches for belt tightening nuts

make it possible to work 

without pulling out pin

A 1477D/S5  140 mm
S 13-15-16-17-19 mm 1 014770200 
 600x200x70 mm -  2,2 kg
L  1478/3P 1 014780151
L A Max S 1 014760060
mm mm mm

309 60 12,2

190 

1479 1479RB/1  1480
trim pin remover straight putty knife scraper 1 014790315 Kit for filling diesel oil filters of cars without
electric pumps
175 mm 100 mm  • Also for use with tyre inflators
30 1 014790320
285 mm mm Kit contents:
 • GM quick couplings
 235 mm 1 014790310 • Renault, GM, Fiat quick couplings, inside Ø 6 mm
1479 2 014790001 • Renault, GM, Fiat quick couplings, inside Ø 7 mm
1479RB/1 • Fordquick couplings
1479/B27 • PSA quick couplings, inside Ø 6 mm
kit of 27 nylon tools for removing pins 1479RB/2 • PSA quick couplings, inside Ø 7 mm
and working on plastics and seals, bent putty knife scraper • Ford quick couplings
hangable • 2 cone-shaped adapters for cars without quick couplings
100 mm
30 1480 
mm  410x320x70 mm 1 014800010

1479/B27  235 mm
1 014790407
1479RB/2

1479RB/3
flat putty knife scraper

100 mm

50
mm

235 mm

1479RB/3

1479U/13
putty knife scrapers

1479L/S2 95 mm 1481/C12
Kit of 6 pairs of hose pliers
multipurpose wrecking bars, pair,
made of Teflon ® Kit contents:
• 2 different pairs of pliers size 1/4"
220 mm • 2 different pairs of pliers size 3/8"
• 2 different pairs of pliers size 5/16"
• 3 pairs of rubber caps

1479U/13 
2 014790010

1479U/32
trim pin remover, stainless steel blade

1479L/S2 
1 014790510

1479N/S5 95 mm
kit of 5 nylon trim pin removers

220 mm

1479U/32 
2 014790015

1479N/S5  1481/C12 
1 014790251  370x270x59 mm 1 014810312

 191

1481PL/A 1482A/1 1482A/5
plastic hose pliers 3-leg wrench for floating ring nuts, wrench for tank floating ring nuts,
tank with aluminium ring nut 22 sectors
160 mm
For operating on aluminium ring nut installed on for use on plastic ring nuts
190 mm Fiat, Volkswagen, Opel, Chevrolet, Mercedes and BMW cars in VAG group cars
since 2011
220 mm 

1481PL/A Ø   Ø
1481PL/B mm 3 014810110 Ø
1481PL/C 3 014810120 Ø mm  
8÷15 3 014810130
15÷25 Ø 180 1 014820015
25÷45 mm  
1482/8 - 1482/10
185 1 014820005 quick coupler pliers for fuel pipes

1482A/2 110 mm
wrench for tank floating ring nuts,
12 sectors Ø

1481PL/S3 For operating on ring nut with no side slots installed on
set of 3 plastic hose pliers Fiat and Ford cars and vans

1481PL/A 

1481PL/B 1482/8 Ø 
Ø 1482/10 mm 2 014820008
2 014820010
Ø 8
mm   10

1481PL/C  132 1 014820006 1482B
1 014810200
1481PL/S3 1482A/3 quick coupler pliers
1481PL-A Ø 8÷15 mm wrench for tank floating ring nuts, for fuel pipes
1481PL-B Ø 15÷25 mm PSA group
1481PL-C Ø 25÷45 mm
So designed as to make it possible to operate on
1482 decentralized axis
by removing ring nut, without damaging delicate fuel line
adjustable self-locking wrench
for tank floating ring nuts  22 mm


1 014820021
Ø 1482B

Ø  1482C
1 014820007 wedges (2 pairs) for releasing diesel fuel filter
mm

157

Ø

Ø fittings, Fiat, Volkswagen, Jeep, Chrysler

mm  1482A/4 and Volvo groups
1 014820001 wrench for tank floating ring nuts,
89÷170

5 teeth

for use on FCA group cars, Quick filter replacement without
including Freemont, 500L, 500X, Renegade irreparably damaging fittings

 22 mm

Ø

Ø
mm  
1 014820014 
145 1482C 1 014820022

192 

1483K/12 1484 1485R
kit for removing valves set of 2 tools for removing and installing universal tool for rotating camshaft pulleys
from air-conditioning system stretch belts made from forged steel
with set of five-star head bits with 2 pairs of tips
Allows stretch belt to be quickly removed and correctly
Kit contents: Ø1
• 2 female octagon sockets, Ø 12 and 15 mm, for high- installed, without risking damaging it
pressure valves Ø
• 2 male open end sockets, section 2.2 and 3.2 mm, for throttle
valves
• 1 set of five-star head bits:
PT10, PT15, PT20, PT25, PT27, PT30, PT40

L

 Ø Ø1 L 
 mm mm mm 1 014850025

30÷120 10 - 17 500

 1485R/P10
1484 1 014840010 pairs of inserts

1485BP Ø 10 mm
half-moon tool
1483K/12  for locking toothed pulleys
 120x80x35 mm 1 014830012
can be adjusted through swivel handle, tightens and locks
pulley from outside, preventing neighbouring sensors from 1485R/P10 
getting damaged 1 014850035
1485R/P17
1483KV-PT/S7 A pairs of inserts
set of five-star head bits
A Max Ø 17 mm
Included sizes:
PT10 - PT15 - PT20 - PT25 - PT27 - PT30 - PT40 mm  
130 1 014850000

 1485/KIT
kit for controlling cam belt tension

1483KV PT/S7  1485R/P17 
1 014830117 1 014850038
1485VAG
1483K/22  tools for pre-loading 1485VAG 12,5
1 014850100 timing belt bearings 1485VAG 21,5
kit for separating couplers on air-conditioning,
fuel supply and lubrication systems • 3-position swivel head 
1 014850062
1485/KIT P 1 014850071
 230x140x75 mm -  580 g
L
1485MJ LP
camshaft locking tool, mm mm
for 1.3 16V Multijet engines
1485VAG/12,5 190 12,5
2 3-form heads for working on all 1.3 16V Multijet engines 1485VAG/21,5 195 21,5

of FCA, Opel, Ford and Suzuki group vehicles

1483K/22  L L
 300x230x55 mm -  1 kg 1 014830022 mm 

1485MJ 500 1 014850150

 193

1486/10 1486/40 1486/80
wrench for natural gas cylinder valves wrench for natural gas cylinder valves wrench for natural gas cylinder valves

• VW group cars since 2008 • Touran 1st series • B-Class
• Panda from 2004 to 2012 • Zafira 3rd series
• Grande Punto from 2005 to 2012
• Ducato since 2010
• new Doblò and Combo
• Cubo and Fiorino

 36 mm  36 mm

 36 mm 1486/40  1486/80 
1 014860140 1 014860180

1486/10  1486/50 1486/90
1 014860110 wrench for natural gas cylinder valves wrench for natural gas cylinder valves

1486/20 • Panda since 2012 • Zafira 1st series
wrench for natural gas cylinder valves • New Ypsilon • Kangoo 1st series
• Sprinter
• Multipla
• Ducato 1st and 2nd series until 2010  36 mm  36 mm
• Berlingo and Ranch
• C3 with iron cylinders 1486/90
• Punto from 1999 to 2010
• Doblò 1st series
• Daily and Iveco group
• Dr5

1486/50  
1 014860150 1 014860190

1486/60 1488 - 1488L
wrench for natural gas cylinder valves oil-filter wrench with double chain

 36 mm • C4 Picasso
• BRC systems
 230 mm
1486/20 1 014860120 Ø

1486/30  36 mm 1488 Ø 
wrench for natural gas cylinder valves 1488L mm 1 014880001
1 014880050
• Zafira 2nd series 60÷110
• Combo 1st series 60÷160 
1 014880010
1486/60  1488/1
1 014860160 oil-filter wrench
with thin double chain
 36 mm 1486/70
wrenches for natural gas cylinder valves, pair 
1486/30
• C3 with composite cylinders Ø

 Ø
1 014860130
mm

60÷110

1488R...
spare chain

 36 mm  1488RC  
1 014860170 1488R/L 1 014880101
1486/70 1488RC/1 1488 1 014880150
1488/L 1 014880110
1488/1

194 

1489/31T 1489/C14 1491
adjustable oil filter wrench
alternator pulley assortment of 14 tools for free alternator
free wheel wrench pulleys





Ø

  
T50 15 31 1 014890016

1489/33 Ø 
alternator pulley free wheel wrench 2 014910001
mm

65÷110

1491R
spare metal band for item 1491

19,45 Ø 12 15
mm mm mm

1489/C14 
1 014890100

   867PE 8 mm 
3 014890010  867PE/L 8 mm 10 014910010
1489/33 33  867XZN/L M10
 867TX/L T50
1491R
1489/33P 867/2 1/2"
alternator pulley free wheel wrench, 10 mm 1491C
for new Bosch FIAT Grande Punto alternators  920B adjustable oil filter pliers

 1489/33

 1489/33P M10

1489R

1489/Y T50 Ø
1489/31T 10 mm
  1489/E 10 mm L
M mm  1 014890015 188 15 mm
188
10 15 31

 420x250x45 mm -  1,9 kg Ø L 
mm 1 014910030
1489/E mm
alternator pulley 300
free wheel wrench 60÷100

 1490 1492/1 - 1492/2
strap wrenches for oil filters adjustable oil filter wrenches

  225 mm
mm mm 1 014890025

10 15

190 mm

1489R Ø
alternator pulley free wheel wrench
Ø

28 mm Ø 
mm 1 014920001
1492/1 1 014920002
1492/2 60÷80
80÷110

 15 mm Ø max 
mm 1 014900001
1489/R  1490/1 1 014900002 1492T
1 014890020 1490/2 160 drier filter wrenches
240

1489/Y 1490/R1 - 1490/R2 H
spare fabric straps for item 1490
alternator pulley free wheel wrench,
for Nippondenso alternators

Ø
Ø

  ØH 
1 014900101 1 014920540
mm  1490R/1 Ø mm 1 014900102 mm mm 1 014920575
3 014890040 1490R/2
32 160 1492T 40 125÷145 40
240 1492T 75 120÷140 75

 195

1493B 1493/PF 1493AL 4S
bi-hex wrenches Purflux® oil-filter wrenches oil filter wrenches
for hard-to-reach oil filter cartridges for Asian cars

 4-hook profile


S 

Ø Ø2

Ø Ø1
mm N
   Ø1 mm Ø2 mm 27 
mm mm 1 014930524 66 6 1 014930202 27 1 014930304
1 014930527 76 12 1 014930216 70 64,5 1 014930305
24 8 1 014930532 76 30 1 014930222 64,5
27 8 1 014930536 86 18 1 014930232 80 
32 8 1 014930538 93 36 1 014930240 1 014930424
36 8 93 45 1 014930242 1493AL CF 1 014930427
38 8 96 9 1 014930070 hexagon socket wrenches 1 014930430
96 18 1 014930246 for oil filter cartridges 1 014930432
108 18 1 014930254 1 014930436
 1 014930438
1493B/S5 1493/C30
set of 5 bi-hex wrenches set of 28 oil filter wrenches H
for hard-to-reach oil filter cartridges
 
sizes:
24-27-32-36-38 mm ØH
mm mm 
Ø
24 34 27
 27 34 27
 30 34 27
32,5 34 27
36 34 27
38 34 27

1493B/S5  Sizes included in kit (Ø mm / n°. of sides) 1493/C19
1 014930599 1493: set of 18 oil filter wrenches,
1493 65/14 - 67/14 - 68/14 - 73/14 - 74/15 particularly suitable for Asian cars
oil filter wrench  76/15 - 75.77/15 - 76/14 - 76/8 - 78/15 - 80/15
1 014930200 82/15 - 86/16 - 90/15 - 92/10 - 93/15 - 95/15 Ø mm N°. of sides
 1 014930206 100/15 - 106/15 - 108/15 63-64 14
1 014930208 66.5 14
1 014930209 1493PF (Purflux) 74 14
1 014930210 66/6 - 76/12 - 76/30- 86/18 79 15
1 014930212 93/36 - 93/45 - 96/18 - 108/18 84 14
1 014930214 87 16
1 014930218 - Includes 1 adjustable oil filter wrench 92 15
1 014930220 Ø 65÷120 mm 94.5 15
1 014930224 100.5 15
1 014930226 1493/C30  64.5 14 hook wrench for Toyota cars
1 014930228  530x400x110 mm -  4 kg 1 014930000 64.5 14 hook wrench for Lexus cars
1 014930230 6 hexagon sockets, sizes 24-27-30-32.5-36-38 mm, for filter
Ø 1 014930234 cartridges
1 014930236 Kit includes 1 universal adjustable wrench Ø 58÷93 mm
Ø N 1 014930238 1493AL
mm 1 014930244 oil filter wrenches 
14 1 014930248 
65 14 1 014930250 N= number of sides
68 14 1 014930252
73 14 1 014930256 
74 15 
74 15 
75-77 8
76 14 Ø
76 15
76-74 15 Ø  1493/C19 
78 15 mm N  1 014930310  490x450x60 mm -  4 kg 1 014930019
80 15 1 014930315
82-80 16 64 14 27 1 014930320
86 15 66,5 14 27 1 014930325
90 10 74 14 27 1 014930330
92 15 79 15 27 1 014930335
93 15 84 14 27 1 014930340
95 15 87 16 27 1 014930345
100 15 92 15 27 1 014930350
106 15 94,5 15 27
108 18 100,5 15 27
135

196 

1493FF 1493Z 1494XZN
wrench for removing/installing plastic seats of self-locking oil filter wrenches, male oil drain plug socket with XZN® profile
Ford Peugeot Citroën oil filters left hand
engines: TDCi-HDi 
 M
Allows plastic seat to be correctly tightened
at 25 Nm by means of a torque wrench Ø M 
16 1 014940296
 1493Z/1 Ø 
 1493Z/2 mm 1 014930090 1494VW
1493Z/3 1 014930095 special socket for plastic oil drain plugs,
250 mm 60÷80 1 014930100 Volkswagen engines
 80÷100
mm   100÷125 Allows plastic plug to be removed and installed
from oil sump.
27 1 014930127 1494 Specially designed for Volkswagen cars with TFSI and TDI
square oil drain plug socket engines
1493/S-U
self-adjusting oil filter wrench with 3 arms,  
for right and left hand tightening  10 mm



1494VW 
1 014940305

mm   1494/C14A
10 1 014940280 assortment of 14 oil change tools

Ø 1494E 
male hexagon oil drain plug sockets
Ø 
 mm 1 014930074 
1 014930076 
1493/S 3/8-1/2 80-115
1493/U 1/2 105-165

1493T mm  
8 1 014940208
self-adjusting oil filter wrench with three arms, 9 1 014940209
for left-hand tightening 10 1 014940210
11 1 014940211
12 1 014940212 1494/C14A 
14 1 014940214 1 014940150
17 1 014940217
  1494E 8-9-10-11-12-14-17
1/2 1494Q  1494Q 8-9,5(3/8")-12-13
male square oil drain plug sockets  1494 10
 21 mm  Δ 1494T 9,5(3/8")
3/8 3/8   1494XZN M16

Ø  380x305x40 mm -  1,7 kg
mm  
Ø  8 1 014940258 1494M
mm 1 014930075 9,5 1 014940259 tool for hexagon oil drain plugs,
12 1 014940262 magnetic, flexible
60÷120 13 1 014940263
Allows plug to be unscrewed without risking
1493J getting burnt or dirty
wrench for MultiJet

1494T Ø
male triangular oil drain plug socket F

Ø  Δ L
1/2 

105 mm 73 mm

Ø L FØ
  
mm 1 014930080 mm 1 014940289 mm kg mm
293 2,5 19 1 014940401
90 9,5

 197

1495/C6 1496/A 1497P
oil plug wrench relay removal pliers, bent pattern, 60°
assortment of tools for repairing oil sump
threads

245 mm

 10 x  10 mm  A
2 014960001

• Damaged thread is removed by screw tap and enlarged by 1496/C A
one size oil plug wrench min÷Max
• Allows repairs and avoids replacing oil sump
Contents: 1497P mm 
• 1 screw tap M13x1.25 + 6 screws + 12 washers 1 014970160
• 1 screw tap M13x1.5 + 6 screws + 12 washers 15÷50
• 1 screw tap M15x1.5 + 6 screws + 12 washers
• 1 screw tap M17x1.5 + 6 screws + 12 washers 1497/C23
• 1 screw tap M20x1.5 + 6 screws + 12 washers
• 1 screw tap M22x1.5 + 6 screws + 12 washers assortment of 23 tools for releasing electrical
connectors
220 mm

 8 x  10 mm 
3 014960010

1495/C6  1497CEL
 420x185x60 mm -  2,1 kg 1 014950500 tool for removing electrical connectors from
VAG group vehicles
1495M
screw tap for oil drain plug threads allows connectors to be quickly disconnected, without getting
damaged.

1497/C23 
 440x250x70 mm -  1,7 kg 1 014970200

1497/C94

assortment of 94 car testing connectors
for use with main diagnostic tools

1497CEL  • 2 t-taps
1 014970170 • 2 potentiometers
• 2 warning lights
M  1497D • 2 SRS connectors
1 014950553 relay removal pliers, straight pattern • 2 alligator clips
13x1,25 1 014950563 • 2 acicular probes
13x1,50 1 014950565 • 2 prods
15x1,50 1 014950567 • 2 dual banana connectors
17x1,50 1 014950570 • 4 single banana connectors
20x1,50 1 014950572 • 24 flat male terminals 0.6÷6 mm
22x1,50 • 12 round male terminals 1.6÷3.9 mm
• 24 flat female terminals 0.6÷6 mm
• 12 round female terminals 1.6÷3.9 mm

1495T A
kit with 6 oil drain plugs and washers

1497D A 
min÷Max 1 014970150

mm

15÷50

M  1497/C94 
1 014950503  430x390x100 mm -  3 kg 1 014970300
13x1,25 1 014950513
13x1,50 1 014950515
15x1,50 1 014950517
17x1,50 1 014950520
20x1,50 1 014950522
22x1,50

198 

1497RC 1498MN/12 1498LT/12 
t-taps, pair multipurpose portable starter
portable high-performance starter,
• cable section: 1.5÷3.5 mm • Motor vehicle starting with 12-volt battery (diesel and petrol ultralightweight
• voltage: 0÷330V engines up to 2,000 cc)
• max. current: 5A • Charging of tablets, mobile phones and electronic devices in
general
• Multi-use LED torch



1497RC  The microprocessor provides full protection against:
1 014970351 - polarity reversal
- short circuits
1498 - incorrect voltage
voltage tester - overloads
- underdischarge
 - overcharge
- overtemperature

135 mm STANDARD ACCESSORIES TECHNICAL DATA
- lithium-cobalt battery Operating voltage: 12 V
- starting cables with insulated clamps and device protecting Continuous amperage: 800 A
against polarity reversal and short circuits Maximum pickup amperage: 2000 A
- USB outlet for charging electronic devices Peak amperage: 4000 A
- digital display and battery charge indicator Cable length: 500 mm
- USB cable with charge adapters Battery type: 4-cell LifePo4
- mains and car power supplier Memory saving function: YES
Dimensions: 260 x 135 x 72 mm
TECHNICAL DATA Net weight: 2.5 kg
Pickup current: 600A Complete with charging power supply 12 V 1.3A
Battery type: LiCoO2
Starting output: 12 volts 1498LT/12 
1 014980012

1498MN/12 
1 014980000

3÷48V  1498MN/12-C 1498LT/12-SF
2 014980100 booster cable with clamps for item 1498MN/12 wall fixing bracket for starter 1498LT/12

1498CM/12 1498MN/12-C  1498LT/12-SF 
portable motorcycle 1 014980005 1 014980013
emergency starter 1498/12
Portable car starter, 12V 
3 functions in 1:
- starter
- additional battery for electronic devices (tablets, smartphones
etc.)
- high-brightness LED torch



Equipment: TECHNICAL DATA:
- Starting cable with insulated clamps and protection diode • Pickup current: 2200A
- Mains battery charger • Shoulder strap included
- Car battery charger • Sealed lead acid battery, solid electrolyte (AGM) type
- USB cable with charge adapters

TECHNICAL DATA
Starting current: 200A
Peak current: 400A
USB outlet: 5V 2,1A
Dimensions: 130x50x15 mm
Weight: approximately 300 g

 1498/12 
1 014980030  13 kg 1 014980480

1498CM/12

 199

1498/24 1498/2A 1498/8A
portable car and commercial vehicle starter, electronic motorcycle battery charger, 12V Electronic car / commercial vehicle battery
12-24V charger, 12 V
allows charging of all
 Pb Wet, Agm, Gel, Mf and Vrla battery types 
and LiFePo4 lithium batteries



TECHNICAL DATA: • Slow and quick charge (2A-8A)
• Pickup current: 4200A (12V) - 2100A (24V) • Flat battery recovery function
• Shoulder strap included • Power supply function 13.8V-5A
• Sealed lead acid battery, solid electrolyte (AGM) type • Protected against polarity reversal and short circuits
• Manual battery type selection
• Digital backlit display
• Pull-back fixing hook

1498/24  - Two different types of charge, for lithium and lead acid batteries TECHNICAL DATA
 17 kg 1 014980490 respectively
- Automatic multi-stage charge cycle Power supply voltage: 220V - 240V
1498B12/R02 - Reverse polarity and short-circuit protection Frequency: 50-60 Hz
- IP65 degree of protection Rated current (min-max): 2-8 Amp
12V spare battery - Complete with cable with clamps and cable with eyelets Battery voltage: 12V
for starters 12-24V - Power supply voltage: 220-240V Battery capacity: 5Ah-160Ah
Memory saving feature: 13,8V - 5A
TECHNICAL DATA Degree of protection: IP65
- Charging current: 1A
- Charging capacity: 2Ah-40Ah 1498/8A 
- Frequency: 50-60 Hz 1 014980108
- Battery voltage: 12V
- Dimensions: 180x80x40 mm 1498/40A
- Weight: 0.5 kg multipurpose battery charger / starter, 12-24V
wheeled
 1498/2A 
1 014980502 1 014980102 

1498B/12-R02  1498/4A

1498C/24 Electronic car/motorcycle battery charger, 6-12
wheeled starter, 24V V



• Wheeled frame for easier movements and minimized effort • Protected against polarity reversal and short circuits • 3 programmed charging cycles and 1 manual cycle
• Outstanding performance for numerous starts, including • Automatic 6 V or 12 V selection • electronic adjusting potentiometer
particularly demanding ones • Automatic battery type selection • specific WET-SPIRAL/GEL-AGM charging cycles
• Electronic battery charger included • Digital backlit display • electronic control and protection system
• LED and sound alarms in case of polarity reversal • Pull-back fixing hook • 10-stage charging process
• Protection against voltage peaks • battery desulfurization and recovery function
• Battery charge indicator • supply function
• Solid electrolyte lead-acid battery (AGM) • dual voltage, 12-24V
• also suitable for Start&Stop batteries
Continuous amperage 1700 A TECHNICAL DATA • professional rubber-insulated brass clamps
Operating voltage 24 V Power supply voltage: 220V-240V
Pickup amperage Frequency: 50-60 Hz TECHNICAL DATA
Cable length 4000 A Rated current (min-max): 1-4 Amp Power supply: 230V
Cable section 2000 mm Battery voltage: 6V/12V Output voltage: 12-24V
Charging voltage Battery capacity: 4Ah-80Ah Charging current: 1-40A
Automatic battery charger 70 mm Charging time: 12 hours Starting current: 350A max cc
230 V Degree of protection: IP65 Charging capacity: 4-450Ah
1498C/24 24 V - 10 A
1498/40A 
200   330x250x792 1 014980140
1 014980244
1498/4A 
1 014980104