Parker Global FRL-General

1002-1/Asia Dec 2010 Parker Global Air Preparation System

Parker One Pneumatic

Parker Global
Air Preparation System

Parker Hannifin Corporation
Pneumatic Division - Asia

1

1002-1/Asia Dec 2010 Parker Global Air Preparation Products

Parker One Pneumatic

DECLARATION OF COMPLIANCE
(ROHS)

European Directive 2002/95/EC - RoHS (Restriction of use of certain Hazardous Substances in electrical and
electronic equipment), restricts the use of the 6 substances below in the manufacture of specified electrical
equipment.

Substance Concentration

LEAD: Product containing lead and its compounds (except for application of lead as an

alloying element by weight in steel up to 0.35%, in aluminum up to 0.4% and in

copper alloys up to 4% and in Circuit Board solder) must not exceed 0.1% by

weight.

MERCURY: The concentration level must not exceed 0.1% by weight.

CADMIUM: The concentration level must not exceed 0.01% by weight.

HEXAVALENT CHROMIUM:
This is a corrosive protective finish used on our product line. Were this finish is
utilized the Chromate solution is Hexavalent (Chrome 6) free.

POLYBROMINATED BIPHENYLS (PBB):
The concentration level must not exceed 0.1% by weight. This substance is not
known to be in any of our products.

POLYBROMINATED DIPHENYL ETHERS (PBDE):
The concentration level must not exceed 0.1% by weight. This substance is not
known to be in any of our products.

This information applies to product sold on or after 1st July, 2006

WARNING

!FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR

RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.

This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide
product and/or system options for further investigation by users h aving technical expertise. It is important that you analyze all
aspects of your application including consequences of any failure, and review the information concerning the product or system
in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the
user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and
assuring that all performance, safety and warning requirements of the application are met.

The products described herein, including without limitation, product features, specifications, designs, availability and pricing,
are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.

Offer of Sale

The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its autho-
rized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this document
entitled “Offer of Sale”.

© Copyright 2010 Parker Hannifin Corporation. All Rights Reserved

Parker Hannifin Corporation
Pneumatic Division - Asia

2

1002-1/Asia Dec 2010 Parker Global Air Preparation Products

Parker One Pneumatic

Introduction....................................................................................................................... 4-13
Combos

P31 Mini Series.............................................................................................................. 14
P32 Compact Series...................................................................................................... 15
P33 Standard Series...................................................................................................... 16
Dimensions.................................................................................................................... 17
Filters

P31 Mini Series.........................................................................................................18-19
P32 Compact Series.................................................................................................20-21
P33 Standard Series.................................................................................................22-23
Coalescing & Adsorber Filters
P31 Mini Series.........................................................................................................24-25
P32 Compact Series.................................................................................................26-27
P33 Standard Series.................................................................................................28-29
Regulators
P31 Mini Series.........................................................................................................30-31
P31 Mini Common Port Regulator............................................................................32-33
P32 Compact Series.................................................................................................34-35
P32 Compact Common Port Regulator....................................................................36-37
P33 Standard Series.................................................................................................38-39
Filter / Regulators
P31 Mini Series.........................................................................................................40-41
P32 Compact Series.................................................................................................42-42
P33 Standard Series.................................................................................................44-45
Lubricators
P31 Mini Series.........................................................................................................46-47
P32 Compact Series.................................................................................................48-49
P33 Standard Series.................................................................................................50-51
Proportional Regulators
P31 Mini Series & P32 Compact Series....................................................................52-61
Combined Soft Start / Dump Valve.................................................................................62-63
Dump Valve.....................................................................................................................64-65
Soft Start Valve................................................................................................................66-67
Solenoid Operators.........................................................................................................68-69
Safety Lockout Valve............................................................................................................ 70
Modular Ball Valves.............................................................................................................. 71
Manifold Blocks.................................................................................................................... 72
Accessories
P31 Mini Series.............................................................................................................. 73
P32 Compact Series...................................................................................................... 74
P33 Standard Series...................................................................................................... 75
Accessories Kits.......................................................................................................76-78
Safety Guide....................................................................................................................80-81
Offer of Sale......................................................................................................................... 82

Parker Hannifin Corporation
Pneumatic Division - Asia

3

1002-1/Asia Dec 2010 Parker Global Air Preparation Products

Parker One Pneumatic Parker Global Air
Preparation System

Global.

Economical.

Modular.

Performance you need,
wherever you need it.

The comprehensive Global Air Preparation System is
available in three body sizes with either BSPP, BSPT,
or NPT to accommodate thread type requirements.

Full featured filters, regulators, filter/regulators,
and lubricators are available with a wide range of
standard options to meet air preparation needs.

Individual units can easily be assembled into various
combinations, utilizing patented modular lightweight
body connectors.

www.parker.com/globalfrl

Parker Hannifin Corporation
Pneumatic Division - Asia

4

1002-1/Asia Dec 2010 Parker Global Air Preparation Products

Parker One Pneumatic

Comprehensive Offering

P31 Mini Series P32 Compact Series P33 Standard Series
1/4" ports 1/4", 3/8" and 1/2" 1/2" and 3/4"
60mm body width
40mm body width 73mm body width

Filters Regulators Filter / Regulators

• 5µ particulate, 1.0µ and 0.01µ • Available as stand alone, • Compact design for space
coalescing, and adsorber common port and electronic savings
available as standard proportional
• Available with all the same
• Transparent or metal bowl • Both relieving and non- standard options as the filters
with manual or auto float relieving versions available and regulators
drains standard

Lubricators Combinations Accessories

• Proportional oil delivery over • Compact design for space • Solenoid operated soft start,
a wide range of air flows savings quick dump, and soft start/
quick dump valves
• Fill under pressure • Easily assembled
• Many configurations available • Manifold blocks

• Shut-off valves (both slide
and ball type)

• Repair kits, gauges, etc.

Parker Hannifin Corporation
Pneumatic Division - Asia

5

1002-1/Asia Dec 2010 Parker Global Air Preparation Products

Parker One Pneumatic

Together we can power your
application with clean, dry air

Fast cycle times, high product quality, and low downtime all require a clean, dry
pneumatic system to function properly. Parker has what it takes to make sure
pneumatic systems perform at their best.

Clean, dry pneumatic systems with
Parker Global Air Preparation

1Stage 2 3

As air is compressed For every 11°C (20°F) Bulk liquid separators 4 5
to 7 bar (100 psig) that the air cools remove condensed
liquids after the Particulate filters are Coalescing filters are
and higher, the relative after leaving the heat aftercooler, receiver, used for the removal designed to remove
humidity quickly of the compressor, water and oil aerosols
50% of the moisture or anywhere within the of solid particle
reaches 100% RH and distribution system. contaminants down to (not vapor) and
air temperatures can condenses into liquid Bulk liquid separators particulate from air
into the system. also help protect 5 micron, as well as streams down to 0.01
reach between downstream filters the removal of
110°C and 200°C The excess moisture in the system where micron in size.
(230°F and 392°F). condenses and excess cooling takes condensed liquids Installed in pairs,
place. Note: Water and oil, Particulate and
collects in the receiver in vapor form, pass Coalescing filters
tank and distribution ensure a continuous
lines. This condensate through general supply of high quality
purpose particulate
must be removed. air.
filters.

Key This type of filter
Particulate should be used as
Oil a prefilter for the
Water
Oil Vapor coalescing (oil
Water Vapor removal) filter.

Parker Hannifin Corporation
Pneumatic Division - Asia

6

1002-1/Asia Dec 2010 Parker Global Air Preparation Products

Parker One Pneumatic

Stages 12 3 4 5 67

Function Air Compressor Bulk Liquid Particulate Coalescing Air Dryers Hydrocarbon
Application Removal Filtration Filtration Removal

All pneumatic Basic pneumatic Basic pneumatic Systems requiring Systems requiring Systems requiring
systems systems systems highest quality air. air with reduced highest quality air for
moisture content critical applications

Air leaving the Removes bulk Removes solid Removes liquid Removes water Removal of odors
aerosols and
compressor room at liquid contamination particulates down to submicron vapor from air and trace vapors for
particulates (not
93ºC (200ºF) releases and protects filters 5 micron, and vapor) down to stream. Dew point critical applications.
0.01 micron.
Description 95% of its moisture where excess cooling the separation of reduced down to 4ºC
P31, P32, P33
Parker into the piping takes place in the bulk contaminants. Coalescing Filter (40ºF) (refrigeration)
Global Air
Preparation system distribution piping or -40ºC (-40ºF)
Solution
when it cools to 38ºC (desiccant).

(100ºF)

Customer P3TF P31, P32, P33 PDRD P31, P32, P33
supplied Bulk Liquid Particulate Filter Refrigeration Dryer Activated Carbon
Separator P3TJ (Adsorber) Filter
Regenerative
Desiccant Dryer

6 7 Clean
Dry Air
Refrigeration and Hydrocarbon and oil
desiccant dryers vapors are removed Parker Hannifin Corporation
lower the air's dew using filters utilizing Pneumatic Division - Asia
point by removing
water vapor, providing activated carbon. 7
appropriately dry air Airborne hydrocarbons
for the downstream are often left over from

application. the compressor oils.

1002-1/Asia Dec 2010 Parker Global Air Preparation Products

Parker One Pneumatic

A completely modular
air preparation system

Filter Easy to adjust non-
rising knob with
snap-lock, preventing
accidental change of
set pressure.

Quick release Regulator Pressure
bayonet-type gauge
integral bowl
and bowl guard
assembly

Bowl guard
with multiple
viewing slots

Manual drain with
pipe-away, auto
drain available

Electronic Proportional Regulator

• Electro-Pneumatic regulator P31P Mini Series P32P Compact Series
• Integrated systems control
• Accurate output pressure
• Micro parameter settings
• Selectable I/O parameters
• Quick, full flow exhaust
• LED display indicates output pressure
• No air consumption in steady state
• Multiple mounting options
• Protection to IP65

Parker Hannifin Corporation
Pneumatic Division - Asia

8

1002-1/Asia Dec 2010 Parker Global Air Preparation Products

Parker One Pneumatic

Combination knob Soft Start /
and sight-dome Quick Dump Valve
for adjusting the
precise amount of 2-piece Patented
lubrication modular body
connector US Patent
Large number 5,383,689
filler plug

Lubricator NPT, BSPP or Aluminum
BSPT porting body
available

Can be filled
under pressure

Common Port Manifold Regulators

• Multiple output pressures (P2, P3, P4, etc.) P1
with common inlet (P1) P2 P3 P4

• Available in two sizes P31 and P32 Parker Hannifin Corporation
Pneumatic Division - Asia
• Balanced valve design for accurate pressure
regulation

• Outlet pressure ports in front and rear of unit.

• Four spring ranges available

P1

9

1002-1/Asia Dec 2010 Parker Global Air Preparation Products

Parker One Pneumatic

Air Preparation

P31 Mini Series

40mm body width
1/4" Ported

Flows up to: dm3/s (SCFM)

Filter 12 (25)

Coalescer 2 (4.2)

Regulator 30 (64)

Filter/Regulator 14 (30)

Lubricator 13 (28)

Features:
• Space saving integral gauge
• Manifold style regulators available
• OSHA compliant shut-off valves
• Soft-Start & Quick Dump valves
• Electronic Proportional Regulator

P32 Compact Series

60mm body width
1/4", 3/8", & 1/2" Ported

Flows up to: dm3/s (SCFM)

Filter 38 (80)

Coalescer 11 (23)

Regulator 67 (142)

Filter/Regulator 64 (136)

Lubricator 47 (100)

Features:
• Manifold style regulators available
• OSHA Compliant shut-off valves
• Soft-Start & Quick Dump valves
• Electronic Proportional Regulator

P33 Standard Series

73mm body width
1/2" & 3/4" Ported

Flows up to: dm3/s (SCFM)

Filter 48 (102)

Coalescer 20 (42)

Regulator 100 (212)

Filter/Regulator 98 (208)

Lubricator 68 (144)

Features:
• OSHA Compliant shut-off valves
• Soft-Start & Quick Dump valves
(Utilizes P32 size only)
• Electronic proportional regulator
(Utilizes P32 size only)

Parker Hannifin Corporation
Pneumatic Division - Asia

10

1002-1/Asia Dec 2010 Parker Global Air Preparation Products

Parker One Pneumatic

Valves and Actuators

Mini Series Complimentary Products

The P31 Mini Series FRL’s and
accessories are well matched for
use with these Parker valves and
actuators.

Isys Micro Moduflex Size 1

OSP-P P1D P1A

Compact Series Complimentary Products

The P32 Series FRL’s &
accessories are well matched for
use with these Parker valves and
actuators.

Isys Micro Isys HA / HB

P1D OSP-P

Standard Series Complimentary Products

The P33 Series FRL’s &
accessories are well matched for
use with these Parker valves and
actuators.

Isys Size 1 Isys HA / HB

P1D OSP-P
11
Parker Hannifin Corporation
Pneumatic Division - Asia

1002-1/Asia Dec 2010 Parker Global Air Preparation Products

Parker One Pneumatic

Complete Pneumatic System

Pressure Regulation

Accurate pressure regulation is important to control forces, speeds, torque, dispensing, processes, etc. Parker has a
global solution to all of your pressure regulation needs, with support around the world.

Function Single Common Port Manifold Electronic Proportional
Description
For pneumatic systems requiring For pneumatic systems requiring For pneumatic systems requiring an
single pressure regulation. multiple pressures for different parts electronic to pneumatic proportional
of the system, yet still having a control signal.
common inlet supply. Also allows pressure regulation to be
integrated into your control systems.

Parker Global P31R, P32R, P33R P31H, P32H P31P, P32P fits Compact & Standard
Air Preparation
Solution

Accessories

Today's sophisticated pneumatic systems need more than just FRL's. Often times peripheral accessory
products are needed to complete your pneumatic system. Parker has what is needed to ensure safe and reliable
start-ups, shut-downs, and lockouts, etc.

Function Ball Valve Slide Valve Soft Start / Soft Start Quick Dump Manifold
Slow Exhaust Quick Dump Block
Soft Start Slow Exhaust
Function
Quick Dump Manual Slide
Function Before or after
FRL or stand
Operation Manual Twist alone Solenoid or Solenoid, Air Solenoid or N/A
P31V, P32V, Air Pilot Pilot, or Internal Air Pilot
Placement Before or after P33V Air Pilot Anywhere within
FRL or stand After FRL After FRL FRL or stand
Parker Global alone After FRL alone
Air Preparation P31T Mini, P32T P31D Mini, P32D
Solution P31V, P32V, fits Compact & P31S Mini, P32S fits Compact & P31M Mini,
P33V Standard fits Compact & Standard P33M fits
Standard Compact &
Standard

Parker Hannifin Corporation
Pneumatic Division - Asia

12

1002-1/Asia Dec 2010 Parker Global Air Preparation Products

Parker One Pneumatic

Application Guide

FRL to Valve: The chart below contains recommendations for the correct selection of Global Air Preparation units to

suit the number and size of valves in a typical application.

P31 Mini Series P32 Compact Series P33 Standard Series

Number of valves that would actuate at once
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Moduflex 1

Isys Micro

HB / Viking Xtreme

Moduflex 2

HA / Global ISO

See Larger Parker FRL Offering

Actuator to FRL: The chart below contains recommendations for the correct selection of Global Air Preparation

units suitable for each cylinder size.If you have a tube length over 2 m, choose one tube size larger than the chart. The
table is based on a Maximum cylinder speed of 0.5m/s

Cyl Ø mm 5 10 16 20 25 Cylinder bore size 50 63 75 80 100
Cyl Ø inches (5/16) (7/16) (9/16) (3/4) (1) (2) (2-1/2) (3) (3-1/4) (4)
28 32 40 45
Tube Ø mm 4 446 6 (1-1/8) (1-1/4) (1-1/2) (1-3/4) 8 10 10 12 12
Tube Ø inches (5/32) (5/32) (5/32) (1/4) (1/4) (5/16) (3/8) (3/8) (1/2) (1/2)
Tube diameter external
1 P31 Mini Series
2 6688
3 (1/4) (1/4) (5/16) (5/16)
4
5Number of cylinders
6 actuating at once
7
8
9
10

P32 Compact Series P33 Standard Series

See Larger
Parker FRL Offering

Note: Data listed above is simply a guideline for a typical application only. Proper sizing
and correct flow requirements must be taken into account.

Parker Hannifin Corporation
Pneumatic Division - Asia

13

1002-1/Asia Dec 2010 P31 Series

Parker One Pneumatic

Popular Combinations

Filter + Regulator + Lubricator Combinations + Poly bowl
5 micron element, 8 bar (116 psig) Regulator + Gauge and Wall Mounting Brackets
Inlet pressure 10 bar (145 psig), Secondary pressure 6.3 bar (91.3 psig),
1 bar (14.5 psig) pressure drop.

Port size Flow Manual Drain Weight Pulse Drain Weight
dm3/s (scfm)

1/4" 13 27 P31CB22GEMN6LNW 0.46 kg (1.01 lbs) P31CB22GEBN6LNW 0.46 kg (1.01 lbs)

Filter/Regulator + Lubricator Combinations + Poly bowl
5 micron element, 8 bar (116 psig) Regulator + Gauge and Wall Mounting Brackets
Inlet pressure 10 bar (145 psig), Secondary pressure 6.3 bar (91.3 psig),
1 bar (14.5 psig) pressure drop.

Port size Flow Manual Drain Weight Pulse Drain Weight
dm3/s (scfm)

1/4" 14 28 P31CA22GEMN6LNW 0.35 kg (0.77 lbs) P31CA22GEBN6LNW 0.35 kg (0.77 lbs)

Filter / Regulator coding
(use with codes: A M T)

Filter coding Regulator coding Lubricator coding Assembly
(use with combo codes: (use with combo codes: (use with combo configuration
B C D F G). For multiple B D E) codes: A B C E)
filters, repeat as needed

P31

Combination Thread type Element Relief / Adjustment Lub type Mounting

B/V + Combination Q BSPP 1 5µ Element E Non-rising knob N Oil mist No bracket A

Combination + B/V X BSPT 2 0.01µ Element C standard L Port blocks C*
sight dome
Combination C NPT 9 Adjustment Range
1µ Element 9 Port blocks D*
Shut off + Combination Y With square gauge & wall brkt
Adsorber A 2 bar (0.2 MPa) * Drain type
Combination + Shut off Z 4 bar (0.4 MPa) * 2
Port size 8 bar (0.8 MPa) ** 4 No drain; N Wall bracket W
With round gauge closed end
Combination type* 1/8 1 Drain type 2 bar (0.2 MPa) 6 * For 3/8” Port
F/R+L A F/R+Fc 1/4 2 Manual drain 4 bar (0.4 MPa)
M Pulse drain M 8 bar (0.8 MPa) Blocks please
B Without guage
F+R+L B F+Fc1+Fc Q 2 bar (0.2 MPa) Z order separately.
4 bar (0.4 MPa) M See Kits section.
F+Fc F F/R+Fc+Fa T
G
F+Fc+Fa G
* Combination type Bowl type Y
F = 5µ L
Fc1 = 1µ
Fc = .01µ 8 bar (0.8 MPa) N
Fa = Adsorber Poly bowl with bowl guard G
* With 0-0.4 MPa guage
Metal bowl without sight gauge M

Note: All bowl types are the same ** With 0-1.1 MPa guage

for each component

Example: If a “G” is specified for a
F+L, both units would get a poly bowl
with bowl guard.

Parker Hannifin Corporation
Pneumatic Division - Asia

14

1002-1/Asia Dec 2010 P32 Series

Parker One Pneumatic

Popular Combinations

Filter + Regulator + Lubricator Combinations + Poly bowl
5 micron element, 8 bar (116 psig) Regulator + Gauge and Wall Mounting Brackets
Inlet pressure 10 bar (145 psig), Secondary pressure 6.3 bar (91.3 psig),
1 bar (14.5 psig) pressure drop.

Port size Flow Manual Drain Weight Auto Drain Weight
dm3/s (scfm)
P32CB22GEMNGLNW 1.29 kg (2.84 lbs) P32CB22GEANGLNW 1.29 kg (2.84 lbs)
1/4" 20 42 P32CB23GEMNGLNW 1.29 kg (2.84 lbs) P32CB23GEANGLNW 1.29 kg (2.84 lbs)
P32CB24GEMNGLNW 1.29 kg (2.84 lbs) P32CB24GEANGLNW 1.29 kg (2.84 lbs)
3/8" 32 68

1/2" 40 85

Filter/Regulator + Lubricator Combinations + Poly bowl
5 micron element, 8 bar (116 psig) Regulator + Gauge and Wall Mounting Brackets
Inlet pressure 10 bar (145 psig), Secondary pressure 6.3 bar (91.3 psig),
1 bar (14.5 psig) pressure drop.

Port size Flow Manual Drain Weight Auto Drain Weight
dm3/s (scfm)

1/4" 22 45 P32CA22GEMNGLNW 1.03 kg (2.27 lbs) P32CA22GEANGLNW 1.03 kg (2.27 lbs)

3/8" 33 70 P32CA23GEMNGLNW 1.03 kg (2.27 lbs) P32CA23GEANGLNW 1.03 kg (2.27 lbs)

1/2" 43 90 P32CA24GEMNGLNW 1.03 kg (2.27 lbs) P32CA24GEANGLNW 1.03 kg (2.27 lbs)

Filter / Regulator coding
(use with codes: A M T)

Filter coding Regulator coding Lubricator coding Assembly
(use with combo codes: (use with combo codes: (use with combo configuration
B C D F G). For multiple B D E W) codes: A B C E)
filters, repeat as needed

P32

Combination Thread type Element Relief / Adjustment Lub type Mounting
Non-rising knob N Oil mist No bracket A
B/V + Combination Q BSPP 1 5µ Element E relieving standard L Port blocks C
sight dome Port blocks D
Combination + B/V X BSPT 2 0.01µ Element C Adjustment range & wall brkt
With round gauge Drain type Wall bracket W
Combination C NPT 9 0.01µ Element D 2 bar; 30 psig; 0.2 MPa Z No drain; N
with dpi 4 bar; 60 psig; 0.4 MPa M closed end
Shut off + Combination Y 8 bar; 125 psig; 0.8 MPa G
17 bar; 250 psig; 1.7 MPa J
Combination + Shut off Z Port size 1µ Element 9 Without gauge
2 bar; 30 psig; 0.2 MPa Y
Combination type* M 1/4 2 1µ Element Q 4 bar; 60 psig; 0.4 MPa L
F/R+L A F/R+Fc Q 3/8 3 with dpi 8 bar; 125 psig; 0.8 MPa N
F+R+L B F+Fc1+Fc 1/2 4 17 bar; 250 psig; 1.7 MPa H
Adsorber A

F+Fc F F/R+Fc+Fa T

F+Fc+Fa G Bowl type Drain type A
* Combination type Poly bowl with bowl guard Auto drain M
F = 5µ Metal bowl without sight gauge Manual drain
Fc1 = 1µ
Fc = .01µ G
Fa = Adsorber M

Metal bowl with sight gauge S

Note: All bowl types are the same
for each component
Example: If a “G” is specified for a
F+L, both units would get a poly bowl
with bowl guard.

Parker Hannifin Corporation
Pneumatic Division - Asia

15

1002-1/Asia Dec 2010 P33 Series

Parker One Pneumatic

Popular Combinations

Filter + Regulator + Lubricator Combinations + Poly bowl
5 micron element, 8 bar (116 psig) Regulator + Gauge and Wall Mounting Brackets
Inlet pressure 10 bar (145 psig), Secondary pressure 6.3 bar (91.3 psig),
1 bar (14.5 psig) pressure drop.

Port size Flow Manual Drain Weight Auto Drain Weight
dm3/s (scfm)
P33CB24GEMNGLNW 1.84 kg (4.06 lbs) P33CB24GEANGLNW 1.84 kg (4.06 lbs)
1/2" 43 90 P33CB26GEMNGLNW 1.84 kg (4.06 lbs) P33CB26GEANGLNW 1.84 kg (4.06 lbs)

3/4" 52 110

Filter/Regulator + Lubricator Combinations + Poly bowl
5 micron element, 8 bar (116 psig) Regulator + Gauge and Wall Mounting Brackets
Inlet pressure 10 bar (145 psig), Secondary pressure 6.3 bar (91.3 psig),
1 bar (14.5 psig) pressure drop.

Port size Flow Manual Drain Weight Auto Drain Weight
dm3/s (scfm) P33CA24GEMNGLNW
1.51 kg (3.33 lbs) P33CA24GEANGLNW 1.51 kg (3.33 lbs)
1/2" 52 110

3/4" 71 150 P33CA26GEMNGLNW 1.51 kg (3.33 lbs) P33CA26GEANGLNW 1.51 kg (3.33 lbs)

Filter / Regulator coding
(use with codes: A M T)

Filter coding Regulator coding Lubricator coding Assembly
(use with combo codes: (use with combo codes: (use with combo configuration
B C D F G). For multiple B D E W) codes: A B C E)
filters, repeat as needed

P33

Combination Thread type Element Relief / Adjustment Lub type Mounting
Non-rising knob N Oil mist No bracket A
B/V + Combination Q BSPP 1 5µ Element E relieving standard L Port blocks C
sight dome Port blocks D
Combination + B/V X BSPT 2 0.01µ Element C Adjustment range & wall brkt
With round gauge Drain type Wall bracket W
Combination C NPT 9 0.01µ Element D 2 bar; 30 psig; 0.2 MPa Z No drain; N
with dpi 4 bar; 60 psig; 0.4 MPa M closed end
Shut off + Combination Y 8 bar; 125 psig; 0.8 MPa G
17 bar; 250 psig; 1.7 MPa J
Combination + Shut off Z Port size 1µ Element 9 Without gauge
2 bar; 30 psig; 0.2 MPa Y
Combination type* M 1/2 4 1µ Element Q 4 bar; 60 psig; 0.4 MPa L
F/R+L A F/R+Fc 3/4 6 with dpi 8 bar; 125 psig; 0.8 MPa N
17 bar; 250 psig; 1.7 MPa H
F+R+L B F+Fc1+Fc Q Adsorber A

F+Fc F F/R+Fc+Fa T

F+Fc+Fa G Bowl type Drain type A
* Combination type Poly bowl with bowl guard Auto drain M
F = 5µ Metal bowl without sight gauge Manual drain
Fc1 = 1µ
Fc = .01µ G
Fa = Adsorber M

Metal bowl with sight gauge S

Note: All bowl types are the same
for each component
Example: If a “G” is specified for a
F+L, both units would get a poly bowl
with bowl guard.

Parker Hannifin Corporation
Pneumatic Division - Asia

16

1002-1/Asia Dec 2010 P31, P32, P33 Series

Parker One Pneumatic

Popular Combination Dimensions

P31C 77
(3.03)
80 40 120 77
(3.15) 41 (1.57) (4.72) (3.03)
40 (1.61) 40
(1.57) (1.57) 41
(1.61)
35 164.1 35
(1.38) (6.46) (1.38) 155.2
(6.11)
35 35
(1.38) (1.38)

4mm (5/32") 33.3 Bowl 4mm (5/32") 33.3 Bowl
I.D. Tube (1.31) removal I.D. Tube (1.31) removal
Barb fitting clearance Barb fitting
clearance

P32C 115
(4.53)
129 47.1
(5.08) (1.85) 198 115
(7.80) (4.53)
64.5
(2.54) 64.5 69 47.1
(2.54) (2.72) (1.85)

50 50
(3.94) (3.94)
100 100
(3.94) (3.94)

254
(10.0)

222
(10.0)

Bowl Bowl
removal removal
4.8 mm (.19) 41 clearance. 4.8 mm (.19) (14.16) clearance.
I.D. Tube (1.6) (Manual and I.D. Tube (Manual and
Barb fitting Barb fitting
Auto Drain.) Auto Drain.)
P33C 77.5
(3.05)
155 120 47.1 50
(6.10) (4.72) (1.85) (3.94)
100
77.5 (3.94) 237 120
(3.05) (9.33) (4.72)

82 47.1
(3.23) (1.85)

50
(3.94)
100
(3.94)

291 238
(11.44) (9.37)

Bowl Bowl
removal removal
4.8 mm (.19) 51 clearance. 4.8 mm (.19) 51 clearance.
I.D. Tube (2.00) (Manual and I.D. Tube (2.00) (Manual and
Barb fitting Barb fitting
Auto Drain.) Auto Drain.)

17 Parker Hannifin Corporation
Pneumatic Division - Asia

1002-1/Asia Dec 2010 P31 Series

Parker One Pneumatic Symbols

Mini Particulate Filter - P31 12

12

Manual drain Auto drain

• Integral 1/4" ports (NPT, BSPP & BSPT)
• High efficiency 5 micron element as standard
• Excellent water removal efficiency
• Robust but lightweight aluminum construction
• One hand operation for easy element cartridge removal
• Positive bayonet latch to ensure correct & safe fitting

Options: FA EN
P31

Thread type Port size Bowl type Mounting
1/8 No bracket
BSPP 1 1/4 1 Poly bowl with bowl guard G N
2
BSPT 2 Metal bowl without sight gauge M

NPT 9

Element Drain type B
5µ Element E Pulse drain M
Manual drain

Port Description Order Code† Flow Max. Height Width Depth
size dm3/s (scfm) bar (psig) mm (inches)
mm (inches) mm (inches)
12 (25) 10 (150) 116.3 (4.58)
1/4" Poly bowl - Manual drain P31FA22EGMN 12 (25) 40 (1.58) 42.7 (1.68)
12 (25) 10 (150) 116.3 (4.58)
1/4" Poly bowl - Pulse drain P31FA22EGBN 12 (25) 40 (1.58) 42.7 (1.68)
17 (250) 116.3 (4.58)
1/4" Metal bowl - Manual drain P31FA22EMMN 40 (1.58) 42.7 (1.68)
17 (250) 116.3 (4.58)
1/4" Metal bowl - Pulse drain P31FA22EMBN 40 (1.58) 42.7 (1.68)

* flow with 6.3 bar (91.3 psig) inlet pressure and 0.34 (4.9 psig) pressure drop.

† Standard part numbers shown in bold. For other models refer to Options
chart above.

Parker Hannifin Corporation
Pneumatic Division - Asia

18

1002-1/Asia Dec 2010 P31 Series

Parker One Pneumatic

Specifications Flow Charts

Flow Capacity* 1/4 12 dm3/s (25 scfm) 1/4 Filter

Max. Operating Plastic Bowl 52°C (125°F) Primary Pressure - bar 1.6 4.0 6.3 10
Temperature Metal Bowl 65.5°C (150°F) 23.2 58 91.4 145
7 0.5 Primary Pressure - psig

Max. Supply Plastic Bowl 10 bar (150 psig) Pressure Drop - (psig) 6 0.4
Pressure Metal Bowl 17 bar (250 psig) Pressure Drop - bar
5
4 0.3

Standard Filtration 5 Micron 3 0.2
2
Useful Retention† 12 cm3 (0.4 US oz.) 1 0.1

Port Size BSPP / BSPT / NPT 1/8, 1/4 00 5 10 15 20
0 Flow - dm3/s 30 40

Weight 0.11 kg (0.24 lbs) 0 10 20
* Inlet pressure 6.3 bar (91.3 psig). Pressure drop 0.34 bar (4.9 psig). Flow - (scfm)

† Useful retention refers to volume below the quiet zone baffle.

Air quality:

Within ISO 8573-1: 1991 Class 3 (Particulates)

Within ISO 8573-1: 2001 Class 6 (Particulates)

Materials of Construction

Body Aluminum
ABS
Body Cap
Polycarbonate
Bowl Nylon
Acetal
Bowl Guard Acetal

Element Retainer Sintered Polyethylene
Nitrile
Baffle

Filter Element

Seals

Dimensions Repair and Service Kits

40.0 42.7 Plastic bowl / Bowl guard manual drain P31KA00BGM
(1.58) (1.68) Metal bowl / w/o sight gauge manual drain P31KA00BMM
Plastic bowl / Bowl guard pulse drain P31KA00BGB
21.3 Metal bowl / w/o sight gauge pulse drain P31KA00BMB
(0.84) 5µ particle filter element P31KA00ESE
C-Bracket (fits to body) P31KA00MW
18.3 T-Bracket with body connector P31KA00MT
(0.72) Body connector P31KA00CB

116.3
(4.58)

4mm (5/32") 33.3 Bowl
I.D. Tube (1.31) removal
Barb fitting clearance

Parker Hannifin Corporation
Pneumatic Division - Asia

19

1002-1/Asia Dec 2010 P32 Series

Parker One Pneumatic Symbols

Compact Particulate Filter - P32 12

12

Manual drain Auto drain

• Integral 1/4", 3/8" or 1/2" ports (NPT, BSPP & BSPT)
• High efficiency 5 micron element as standard
• Excellent water removal efficiency
• Robust but lightweight aluminum construction
• Positive bayonet latch to ensure correct & safe fitting

Options: FA EN
P32

Thread type Port size Bowl type Mounting
1/4 2 No bracket
BSPP 1 3/8 3 Poly bowl with bowl guard G N
1/2 4
BSPT 2 Metal bowl without sight gauge M

NPT 9 Metal bowl with sight gauge S

Element Drain type M
5µ Element E Manual drain A
Auto drain

Port Description Order Code† Flow Max. Height Width Depth
size dm3/s (scfm) bar (psig)
P32FA22EGMN 10 (150) mm (inches) mm (inches) mm (inches)
P32FA22EGAN 18 (38) 10 (150)
1/4" Poly bowl - Manual drain P32FA22ESMN 18 (38) 17 (250) 188 (7.4) 60 (2.36) 60 (2.36)
P32FA22ESAN 18 (38) 17 (250)
1/4" Poly bowl - Auto drain P32FA23EGMN 18 (38) 10 (150) 182 (7.2) 60 (2.36) 60 (2.36)
P32FA23EGAN 30 (64) 10 (150)
1/4" Metal bowl - Manual drain P32FA23ESMN 30 (64) 17 (250) 188 (7.4) 60 (2.36) 60 (2.36)
P32FA23ESAN 30 (64) 17 (250)
1/4" Metal bowl - Auto drain P32FA24EGMN 30 (64) 10 (150) 182 (7.2) 60 (2.36) 60 (2.36)
P32FA24EGAN 38 (80) 10 (150)
3/8" Poly bowl - Manual drain P32FA24ESMN 38 (80) 17 (250) 188 (7.4) 60 (2.36) 60 (2.36)
P32FA24ESAN 38 (80) 17 (250)
3/8" Poly bowl - Auto drain 38 (80) 182 (7.2) 60 (2.36) 60 (2.36)

3/8" Metal bowl - Manual drain 188 (7.4) 60 (2.36) 60 (2.36)

3/8" Metal bowl - Auto drain 182 (7.2) 60 (2.36) 60 (2.36)

1/2" Poly bowl - Manual drain 188 (7.4) 60 (2.36) 60 (2.36)

1/2" Poly bowl - Auto drain 182 (7.2) 60 (2.36) 60 (2.36)

1/2" Metal bowl - Manual drain 188 (7.4) 60 (2.36) 60 (2.36)

1/2" Metal bowl - Auto drain 182 (7.2) 60 (2.36) 60 (2.36)

* flow with 6.3 bar (91.3 psig) inlet pressure and 0.34 (4.9 psig) pressure drop.

† Standard part numbers shown in bold. For other models refer to Options
chart above.

Parker Hannifin Corporation
Pneumatic Division - Asia

20

1002-1/Asia Dec 2010 P32 Series

Parker One Pneumatic

Specifications Flow Charts

Flow Capacity* 1/4 18 dm3/s (38 scfm) 1/4 Filter Primary Pressure - bar 1.6 4.0 6.3 10
30 dm3/s (64 scfm) 23.2 58 91.4 145
3/8 38 dm3/s (80 scfm) 7 0.5 Primary Pressure - psig

1/2 52°C (125°F) 6 0.4
65.5°C (150°F)
Operating Plastic Bowl 10 bar (150 psig) Pressure Drop - (psig) 5
17 bar (250 psig) Pressure Drop - bar4 0.3
Temperature Metal Bowl
5 Micron
Max. Supply Plastic Bowl 51 cm3 (1.7 US oz.) 3 0.2

Pressure Metal Bowl 1/4, 3/8, 1/2 2
0.28 kg (0.62 lbs) 1 0.1
Standard Filtration

Useful Retention† 00 10 Flow - dm3/s 20 30
0 30 40 60

Port Size BSPP / BSPT / NPT 0 10 20 Flow - (scfm) 50 10
145
Weight 3/8 Filter Primary Pressure - bar

* Inlet pressure 6.3 bar (91.3 psig). Pressure drop 0.34 bar (4.9 psig). 7 0.5 Primary Pressure - psig 1.6 4.0 6.3
† Useful retention refers to volume below the quiet zone baffle. 23.2 58 91.4
Air quality:
Within ISO 8573-1: 1991 Class 3 (Particulates) Pressure Drop - (psig) 6 0.4
Within ISO 8573-1: 2001 Class 6 (Particulates) Pressure Drop - bar
5
4 0.3

Materials of Construction 3 0.2
2
Body Aluminum 1 0.1
ABS
Body Cap 00 10 20 dm3/s30 40 50
Polycarbonate 0 Flow
Bowls Plastic Bowl Aluminum 0 -
Nylon
Metal Bowl 20 40 60 80 100
Polypropylene Flow - (scfm)

Bowl Guard Sintered Polyethylene 1/2 Filter Primary Pressure - bar 1.6 4.0 6.3 10
Nitrile 23.2 58 91.4 145
Deflector Nitrile Primary Pressure - psig
7 0.5
Element Retainer / Baffle Acetal Polycarbonate
Pressure Drop - (psig) 6 0.4
Filter Element Pressure Drop - bar
5
Seals Plastic Bowl 4 0.3

Metal Bowl 3 0.2
2
Sight Gauge Metal Bowl
0.1
1

00 10 20 30 40 50 60
0 Flow - dm3/s
0
20 40 60 80 100 120
Flow - (scfm)

Dimensions 60 Repair and Service Kits
(2.36)
60.0 30 Plastic bowl / Bowl guard manual drain P32KA00BGM
(2.36) (1.18) Metal bowl / Sight gauge manual drain P32KA00BSM
Auto drain P32KA00DA
26 5µ particle filter element P32KA00ESE
(1.0) L-Bracket (fits to body) P32KA00ML
T-Bracket (fits to body connector) P32KA00MB
188 T-Bracket with body connector P32KA00MT
(7.4) Body connector P32KA00CB
Differential pressure indicator (replacement) P32KA00RQ

4.8 mm (.19") Bowl Use 10mm
I.D. Tube removal or 3/8" Flex
Barb fitting 41 clearance. Tubing
(1.6) (Manual and Automatic Drain
Manual Drain
Auto Drain.)

Parker Hannifin Corporation
Pneumatic Division - Asia

21

1002-1/Asia Dec 2010 P33 Series

Parker One Pneumatic Symbols

Standard Particulate Filter - P33 12

12

Manual drain Auto drain

• Integral 1/2" or 3/4" ports (NPT, BSPP & BSPT)
• High efficiency 5 micron element as standard
• Excellent water removal efficiency
• Robust but lightweight aluminum construction
• Positive bayonet latch to ensure correct & safe fitting

Options: FA EN
P33

Thread type Port size Bowl type Mounting
1/2 4 No bracket
BSPP 1 3/4 6 Poly bowl with bowl guard G N

BSPT 2 Metal bowl without sight gauge M

NPT 9 Metal bowl with sight gauge S

Element Drain type M
5µ Element E Manual drain A
Auto drain

Port Description Order Code† Flow Max. Height Width Depth
size dm3/s (scfm) bar (psig)
10 (150) mm (inches) mm (inches) mm (inches)
40 (85) 10 (150)
1/2" Poly bowl - Manual drain P33FA24EGMN 40 (85) 17 (250) 213 (8.4) 73 (2.9) 73 (2.9)
40 (85) 17 (250)
1/2" Poly bowl - Auto drain P33FA24EGAN 40 (85) 10 (150) 207 (8.2) 73 (2.9) 73 (2.9)
48 (102) 10 (150)
1/2" Metal bowl - Manual drain P33FA24ESMN 48 (102) 17 (250) 213 (8.4) 73 (2.9) 73 (2.9)
48 (102) 17 (250)
1/2" Metal bowl - Auto drain P33FA24ESAN 48 (102) 207 (8.2) 73 (2.9) 73 (2.9)

3/4" Poly bowl - Manual drain P33FA26EGMN 213 (8.4) 73 (2.9) 73 (2.9)

3/4" Poly bowl - Auto drain P33FA26EGAN 207 (8.2) 73 (2.9) 73 (2.9)

3/4" Metal bowl - Manual drain P33FA26ESMN 213 (8.4) 73 (2.9) 73 (2.9)

3/4" Metal bowl - Auto drain P33FA26ESAN 207 (8.2) 73 (2.9) 73 (2.9)

* flow with 6.3 bar (91.3 psig) inlet pressure and 0.34 (4.9 psig) pressure drop.

† Standard part numbers shown in bold. For other models refer to Options
chart above.

Parker Hannifin Corporation
Pneumatic Division - Asia

22

1002-1/Asia Dec 2010 P33 Series

Parker One Pneumatic

Specifications Flow Charts

Flow Capacity* 1/2 40 dm3/s (85 scfm) 1/2 Filter Primary Pressure - bar 1.6 4.0 6.3 10
48 dm3/s (102 scfm) 23.2 58 91.4 145
3/4 Primary Pressure - psig
52°C (125°F) 7 0.5
Max. Operating Plastic Bowl 65.5°C (150°F) 6 0.4
10 bar (150 psig) 5
Temperature Metal Bowl 17 bar (250 psig) 4 0.3Pressure Drop - (psig)
3 0.2Pressure Drop - bar
Max. Supply Plastic Bowl 5 Micron 2
85 cm3 (2.8 US oz.) 1 0.1
Pressure Metal Bowl 00
1/2, 3/4
Standard Filtration 0.46 kg (1.01 lbs) 0 10 20

Useful Retention† 0 20 40

Port Size BSPP / BSPT / NPT 30 40 50 60 70
Flow - dm3/s 100 120 140
Weight 60 80
Flow - (scfm)
* Inlet pressure 6.3 bar (91.3 psig). Pressure drop 0.34 bar (4.9 psig).
† Useful retention refers to volume below the quiet zone baffle. 3/4 Filter Primary Pressure - bar 1.6 4.0 6.3 10
Air quality: 23.2 58 91.4 145
Within ISO 8573-1: 1991 Class 3 (Particulates) 7 0.5 Primary Pressure - psig
Within ISO 8573-1: 2001 Class 6 (Particulates)

Materials of Construction Pressure Drop - (psig) 6 0.4
Pressure Drop - bar
Body Aluminum 5
ABS 4 0.3

Body Cap Polycarbonate 3 0.2
Aluminum
Bowls Plastic Bowl Nylon 2
0.1
Metal Bowl Polypropylene
1
Sintered Polyethylene
Bowl Guard Nitrile 00 10 20 30 40 50 60 70 80
Nitrile 0 Flow - dm3/s
Deflector 0
Polycarbonate 20 40 60 80 100 120 140 160
Element Retainer / Baffle Acetal Flow - (scfm)

Filter Element

Seals Plastic Bowl

Metal Bowl

Sight Gauge Metal Bowl

Dimensions Repair and Service Kits

73 Plastic bowl / Bowl guard manual drain P33KA00BGM
73 36 (2.9) Metal bowl / Sight gauge manual drain P33KA00BSM
(2.9) (1.4)

26 Auto drain P32KA00DA

(1.0) 5µ particle filter element P33KA00ESE

L-Bracket (fits to body) P33KA00ML

T-Bracket (fits to body connector) P32KA00MB

T-Bracket with body connector P33KA00MT

213 Body connector P32KA00CB

(8.4) Differential pressure indicator (replacement) P32KA00RQ

4.8 mm (.19) Bowl Use 10mm
I.D. Tube removal or 3/8" Flex
Barb fitting 51 clearance. Tubing
(2.0) (Manual and Automatic Drain
Manual Drain
Auto Drain.)

23 Parker Hannifin Corporation
Pneumatic Division - Asia

1002-1/Asia Dec 2010 P31 Series

Parker One Pneumatic • Integral 1/4" ports (NPT, BSPP & BSPT)
• Removes liquid aerosols and sub micron particles
Mini Coalescing and Adsorber Filters - P31 • Oil free air for critical applications, such as air gauging,

pneumatic instrumentation and control
• Positive bayonet latch to ensure correct & safe fitting
• Adsorbing activated carbon element removes oil vapors

and most hydrocarbons

Note: To optimize the life of coalescing element, it is
advisable to install a P31F pre-filter with a 5 micron
element upstream of the coalescing filter.

To optimize the life of an Adsorber it is advisable
to install a P31 Coalescing Filter upstream of the
Options: Adsorber. Adsorber element should be replaced
P31 approximately every 1000 hours of service.

FA N

Thread type Port size Bowl type Mounting
1/8 No bracket
BSPP 1 1/4 1 Poly bowl with bowl guard G N
2
BSPT 2 Metal bowl without sight gauge M

NPT 9

Element C Drain type B
0.01µ Element 9 Pulse drain M
1µ Element A Manual drain
Adsorber

Port Description Order Code† Flow Max. Height Width Depth
size P31FA22CGMN dm3/s (scfm) bar (psig)
mm (inches) mm (inches) mm (inches)
2 (4.2) 10 (150)
1/4" Poly bowl - 0.01 micron - Manual drain 2 (4.2) 116.3 (4.58) 40 (1.58) 42.7 (1.68)
2 (4.2) 10 (150)
1/4' Poly bowl - 0.01 micron - Pulse drain P31FA22CGBN 2 (4.2) 116.3 (4.58) 40 (1.58) 42.7 (1.68)
17 (250)
1/4" Metal bowl - 0.01 micron - Manual drain P31FA22CMMN 116.3 (4.58) 40 (1.58) 42.7 (1.68)
1/4' Metal bowl - 0.01 micron - Pulse drain P31FA22CMBN 17 (250)
116.3 (4.58) 40 (1.58) 42.7 (1.68)

* flow with 6.3 bar (91.3 psig) inlet pressure and 0.2 (3 psig) pressure drop.

† Standard part numbers shown in bold. For other models refer to Options
chart above.

Indicates stocked product.

Parker Hannifin Corporation
Pneumatic Division - Asia

24

1002-1/Asia Dec 2010 P31 Series

Parker One Pneumatic

Specifications Flow Charts

Flow Capacity dm3/s SCFM P31 - 1.0 micron flow

1.0 Micron Coalescing Energy Efficient Flow* 3.8 (8) Primary Pressure - bar 2.0 4.0 6.3

Maximum Flow** 6 (13) 7 0.5 Primary Pressure - psig 29 58 91.4

Activated Carbon Adsorber Rated Flow* 6 (13) 6 0.4

Max.. Operating Plastic Bowl 52°C (125°F) Pressure Drop - (psig) 5
Pressure Drop - bar4 0.3
Temperature Metal Bowl 65.5°C (150°F)

Max. Supply Plastic Bowl 10 bar (150 psig) 3 0.2

Pressure Metal Bowl 17 bar (250 psig) 2 Saturated
0.1 Element
Standard Filtration 1.0 and 0.01 Micron Flow
1
ppm wt
0 00 1 2 3 4 5 6 7 8
Adsorber Max. oil carryover (ppm w/w) 0.003 @ 21OC (70OF) Flow - dm3/s

Useful Retention† 12 cm3 (0.4 US oz.) 0 5 10 15
Flow - (scfm)
Port Size BSPP / BSPT / NPT 1/4

Weight 0.11 kg (0.24 lbs)

* Inlet pressure 6.3 bar (91.3 psig), Pressure drop 0.2 bar (3 psig),
Saturated Element.

** Inlet pressure 6.3 bar (91.3 psig), Pressure drop 0.4 bar (6 psig),
Saturated Element.

† Useful retention refers to volume below the quiet zone baffle.

Materials of Construction

Body Aluminum
ABS
Body Cap
Polycarbonate
Bowl Plastic Bowl Aluminum

Metal Bowl Borosilicate Cloth
Activated Carbon
Filter Element 1.0 and .01 Micron
Nitrile
Adsorber

Seals

Dimensions Repair and Service Kits

40.0 42.7 Plastic bowl / Bowl guard manual drain P31KA00BGM
(1.58) (1.68) Metal bowl / w/o sight gauge manual drain P31KA00BMM
21.3 Plastic bowl / Bowl guard pulse drain P31KA00BGB
(0.84) Metal bowl / w/o sight gauge pulse drain P31KA00BMB
1µ coalescing filter element P31KA00ES9
18.3 0.01µ coalescing filter element P31KA00ESC
(0.72) Activated carbon adsorber filter element P31KA00ESA
C-Bracket (fits to body) P31KA00MW
116.3 T-Bracket with body connector P31KA00MT
(4.58) Body connector P31KA00CB

4mm (5/32") 33.3 Bowl
I.D. Tube (1.31) removal
Barb fitting clearance

Parker Hannifin Corporation
Pneumatic Division - Asia

25

1002-1/Asia Dec 2010 P32 Series

Parker One Pneumatic

Compact Coalescing and Adsorber Filter - P32 • Integral 1/4", 3/8" or 1/2" ports (NPT, BSPP & BSPT)
Options:
• Removes liquid aerosols and sub micron particles

• Oil free air for critical applications, such as air gauging,
pneumatic instrumentation and control

• Differential Pressure Indicator (DPI) standard on
Coalescing Filters

• Positive bayonet latch to ensure correct & safe fitting

• Adsorbing activated carbon element removes oil vapors and
most hydrocarbons

Note: To optimize the life of coalescing element, it is
advisable to install a P32F pre-filter with a 5 micron
element upstream of the coalescing filter.

To optimize the life of an Adsorber it is advisable
to install a P32 Coalescing Filter upstream of the
Adsorber. Adsorber element should be replaced
approximately every 1000 hours of service.

P32 FA N

Thread type Port size Bowl type Mounting
1/4 2 No bracket
BSPP 1 3/8 3 Poly bowl with bowl guard G N
1/2 4
BSPT 2 Metal bowl without sight gauge M

NPT 9 Metal bowl with sight gauge S

Element C Drain type M
0.01µ Element D Manual drain A
0.01µ Element with dpi 9 Auto drain
1µ Element Q
1µ Element with dpi A
Adsorber

Port Description Order Code† Flow Max. Height Width Depth
size dm3/s (scfm) bar (psig) mm (inches) mm (inches) mm (inches)
P32FA22DGMN 10 (150)
1/4" Poly bowl - 0.01 Micron, Manual drain P32FA22DGAN 11 (23) 10 (150) 209 (8.2) 60 (2.36) 60 (2.36)
P32FA22DSMN 11 (23) 17 (250) 203 (8.0) 60 (2.36) 60 (2.36)
1/4" Poly bowl - 0.01 Micron, Auto drain P32FA22DSAN 11 (23) 17 (250) 209 (8.2) 60 (2.36) 60 (2.36)
P32FA23DGMN 11 (23) 10 (150) 203 (8.0) 60 (2.36) 60 (2.36)
1/4" Metal bowl - 0.01 Micron, Manual drain P32FA23DGAN 11 (23) 10 (150) 209 (8.2) 60 (2.36) 60 (2.36)
P32FA23DSMN 11 (23) 17 (250) 203 (8.0) 60 (2.36) 60 (2.36)
1/4" Metal bowl - 0.01 Micron, Auto drain P32FA23DSAN 11 (23) 17 (250) 209 (8.2) 60 (2.36) 60 (2.36)
P32FA24DGMN 11 (23) 10 (150) 203 (8.0) 60 (2.36) 60 (2.36)
3/8" Poly bowl - 0.01 Micron, Manual drain P32FA24DGAN 11 (23) 10 (150) 209 (8.2) 60 (2.36) 60 (2.36)
P32FA24DSMN 11 (23) 17 (250) 203 (8.0) 60 (2.36) 60 (2.36)
3/8" Poly bowl - 0.01 Micron, Auto drain P32FA24DSAN 11 (23) 17 (250) 209 (8.2) 60 (2.36) 60 (2.36)
11 (23) 203 (8.0) 60 (2.36) 60 (2.36)
3/8" Metal bowl - 0.01 Micron, Manual drain

3/8' Metal bowl - 0.01 Micron, Auto drain

1/2" Poly bowl - 0.01 Micron, Manual drain

1/2" Poly bowl - 0.01 Micron, Auto drain

1/2" Metal bowl - 0.01 Micron, Manual drain

1/2" Metal bowl - 0.01 Micron, Auto drain

* flow with 6.3 bar (91.3 psig) inlet pressure and 0.2 (3 psig) pressure drop.

† Standard part numbers shown in bold. For other models refer to Options
chart above.

Parker Hannifin Corporation
Pneumatic Division - Asia

26

1002-1/Asia Dec 2010 P32 Series

Parker One Pneumatic

Specifications Flow Charts

Flow Capacity dm3/s SCFM P32 - 1.0 micron flow

1.0 Micron Coalescing Energy Efficient Flow* 17 (36) Primary Pressure - bar 2.0 4.0 6.3
7 0.5 Primary Pressure - psig 29 58 91.4
Maximum Flow** 27 (57)
Saturated
0.01 Micron Coalescing Energy Efficient Flow* 11 (23) Pressure Drop - (psig) 6 0.4 Element
Pressure Drop - bar Flow
Maximum Flow** 28 (38) 5 25 30 35
4 0.3 50 60 70
Activated Carbon Adsorber Rated Flow* 27 (57)

Max. Operating Plastic Bowl 52°C (125°F) 3 0.2
2
Temperature Metal Bowl 65.5°C (150°F) 1 0.1

Max. Supply Plastic Bowl 10 bar (150 psig)

Pressure Metal Bowl 17 bar (250 psig) 00 5 10 15 20
0 Flow - dm3/s
Standard Filtration 1.0 and 0.01 Micron 0
10 20 30 40
ppm wt Flow - (scfm)

Adsorber Max. oil carryover (ppm w/w) 0.003 @ 21OC (70OF)

Useful Retention† 51 cm3 (1.7 US oz.) P32 - 0.01 micron flow

Port Size BSPP / BSPT / NPT 1/4, 3/8, 1/2 Primary Pressure - bar 2.0 4.0 6.3
7 0.5 Primary Pressure - psig 29 58 91.4
Weight 0.32 kg (0.71 lbs)

* Inlet pressure 6.3 bar (91.3 psig), Pressure drop 0.2 bar (3 psig), Pressure Drop - (psig) 6 0.4
Saturated Element. Pressure Drop - bar
5
** Inlet pressure 6.3 bar (91.3 psig), Pressure drop 0.4 bar (6 psig), 4 0.3
Saturated Element.
3 0.2
† Useful retention refers to volume below the quiet zone baffle. 2
1 0.1
Saturated
Element
Flow

00 5 10 - dm3/1s5 20 25
0 Flow
0
10 20 30 40 50
Flow - (scfm)

Materials of Construction



Dimensions Body Aluminum

60.0 Body Cap ABS
(2.36)
60 Bowls Plastic Bowl Polycarbonate
DPI (2.36)
30 Metal Bowl Aluminum
48 (1.18)
(1.9) Filter Element 1.0 and .01 Micron Borosilicate Cloth

Adsorber Activated Carbon

Seals Nitrile

Sight Gauge Metal Bowl Polycarbonate

Repair and Service Kits

209 Plastic bowl / Bowl guard manual drain P32KA00BGM
(8.2) Metal bowl / Sight gauge manual drain P32KA00BSM
Auto drain P32KA00DA
4.8 mm (.19) Bowl Use 10mm 1µ coalescing filter element P32KA00ES9
I.D. Tube removal or 3/8" Flex 0.01µ coalescing filter element P32KA00ESC
Barb fitting 41 clearance. Tubing Activated carbon adsorber filter element P32KA00ESA
(1.6) (Manual and Automatic Drain L-Bracket (fits to body) P32KA00ML
Manual Drain T-Bracket (fits to body connector) P32KA00MB
Auto Drain.) T-Bracket with body connector P32KA00MT
Body connector P32KA00CB
Differential pressure indicator (replacement) P32KA00RQ

Parker Hannifin Corporation
Pneumatic Division - Asia

27

1002-1/Asia Dec 2010 P33 Series

Parker One Pneumatic

Standard Coalescing and Adsorber Filter - P33 • Integral 1/2" or 3/4" ports (NPT, BSPP & BSPT)
Options:
• Removes liquid aerosols and sub micron particles

• Oil free air for critical applications, such as air gauging,
pneumatic instrumentation and control

• Differential Pressure Indicator (DPI) standard on
Coalescing Filters

• Positive bayonet latch to ensure correct & safe fitting

• Adsorbing activated carbon element removes oil vapors and
most hydrocarbons

Note: To optimize the life of coalescing element, it is
advisable to install a P33F pre-filter with a 5 micron
element upstream of the coalescing filter.

To optimize the life of an Adsorber it is advisable
to install a P33 Coalescing Filter upstream of the
Adsorber. Adsorber element should be replaced
approximately every 1000 hours of service.

P33 FA N

Thread type Port size Bowl type Mounting
1/2 4 No bracket
BSPP 1 3/4 6 Poly bowl with bowl guard G N

BSPT 2 Metal bowl without sight gauge M

NPT 9 Metal bowl with sight gauge S

Element C Drain type M
0.01µ Element D Manual drain A
0.01µ Element with dpi 9 Auto drain
1µ Element Q
1µ Element with dpi A
Adsorber

Port Description Order Code† Flow Max. Height Width Depth
size dm3/s (scfm) bar (psig) mm (inches) mm (inches) mm (inches)
P33FA24DGMN 10 (150)
1/2" Poly bowl - 0.01 Micron, Manual drain P33FA24DGAN 20 (42) 10 (150) 235 (9.3) 73 (2.9) 73 (2.9)
P33FA24DSMN 20 (42) 17 (250) 229 (9.0) 73 (2.9) 73 (2.9)
1/2" Poly bowl - 0.01 Micron, Auto drain P33FA24DSAN 20 (42) 17 (250) 235 (9.3) 73 (2.9) 73 (2.9)
P33FA26DGMN 20 (42) 10 (150) 229 (9.0) 73 (2.9) 73 (2.9)
1/2" Metal bowl - 0.01 Micron, Manual drain P33FA26DGAN 20 (42) 10 (150) 235 (9.3) 73 (2.9) 73 (2.9)
P33FA26DSMN 20 (42) 17 (250) 229 (9.0) 73 (2.9) 73 (2.9)
1/2" Metal bowl - 0.01 Micron, Auto drain P33FA26DSAN 20 (42) 17 (250) 235 (9.3) 73 (2.9) 73 (2.9)
20 (42) 229 (9.0) 73 (2.9) 73 (2.9)
3/4" Poly bowl - 0.01 Micron, Manual drain

3/4" Poly bowl - 0.01 Micron, Auto drain

3/4" Metal bowl - 0.01 Micron, Manual drain

3/4" Metal bowl - 0.01 Micron, Auto drain

* flow with 6.3 bar (91.3 psig) inlet pressure and 0.2 (3 psig) pressure drop.

† Standard part numbers shown in bold. For other models refer to Options
chart above.

Parker Hannifin Corporation
Pneumatic Division - Asia

28

1002-1/Asia Dec 2010 P33 Series

Parker One Pneumatic

Specifications Flow Charts

Flow Capacity dm3/s SCFM P33 - 1.0 micron flow

1.0 Micron Coalescing Energy Efficient Flow* 32 (68) Primary Pressure - bar 2.0 4.0 6.3
7 0.5 Primary Pressure - psig 29 58 91.4
Maximum Flow** 44 (93)

0.01 Micron Coalescing Energy Efficient Flow* 20 (42) 6 0.4

Maximum Flow** 34 (72) Pressure Drop - (psig) 5
Pressure Drop - bar4 0.3
Activated Carbon Adsorber Rated Flow* 44 (93)

Max. Operating Plastic Bowl 52°C (125°F) 3 0.2
2
Temperature Metal Bowl 65.5°C (150°F) 1 0.1 Saturated
Element
Max. Supply Plastic Bowl 10 bar (150 psig) Flow

Pressure Metal Bowl 17 bar (250 psig) 0 00 10 20 dm3/s30 40 50
Flow
Standard Filtration 1.0 and 0.01 Micron -

ppm wt 0 20 40 60 80 100
Flow - (scfm)
Adsorber Max. oil carryover (ppm w/w) 0.003 @ 21OC (70OF)

Useful Retention† 85 cm3 (2.8 US oz.) P33 - 0.01 micron flow

Port Size BSPP / BSPT / NPT 1/2, 3/4 Primary Pressure - bar 2.0 4.0 6.3
7 0.5 Primary Pressure - psig 29 58 91.4
Weight 0.50 kg (1.10 lbs)

* Inlet pressure 6.3 bar (91.3 psig), Pressure drop 0.2 bar (3 psig), 6 0.4

Saturated Element. Pressure Drop - (psig) 5
Pressure Drop - bar4 0.3
** Inlet pressure 6.3 bar (91.3 psig), Pressure drop 0.4 bar (6 psig),
Saturated Element.

† Useful retention refers to volume below the quiet zone baffle. 3 0.2

2 Saturated
1 0.1 Element
Flow

00 10 Flow2-0dm3/s 30 40
0

0 20 40 60 80
Flow - (scfm)

Dimensions Materials of Construction

73 Body Aluminum
(2.9) ABS
73 Body Cap
DPI (2.9) Polycarbonate
Bowls Plastic Bowl Zinc
48 36
(1.9) (1.4) Metal Bowl Borosilicate Cloth
Activated Carbon
Filter Element 1.0 and .01 Micron
Nitrile
Adsorber Polycarbonate

Seals

Sight Gauge Metal Bowl

Repair and Service Kits

235 Plastic bowl / Bowl guard manual drain P33KA00BGM
(9.3) Metal bowl / Sight gauge manual drain P33KA00BSM
Auto drain P32KA00DA
4.8 mm (.19) Bowl Use 10mm 1µ coalescing filter element P33KA00ES9
I.D. Tube removal or 3/8" Flex 0.01µ coalescing filter element P33KA00ESC
Barb fitting 51 clearance. Tubing Activated carbon adsorber filter element P33KA00ESA
(2.0) (Manual and Automatic Drain L-Bracket (fits to body) P33KA00ML
Manual Drain T-Bracket (fits to body connector) P32KA00MB
Auto Drain.) T-Bracket with body connector P32KA00MT
Body connector P32KA00CB
Differential pressure indicator (replacement) P32KA00RQ

Parker Hannifin Corporation
Pneumatic Division - Asia

29

1002-1/Asia Dec 2010 P31 Series

Parker One Pneumatic Symbols
Mini Regulator - P31
3 12
Options: 12

Self relieving regulator Non relieving regulator
with gauge

• Integral 1/4" ports (NPT, BSPP & BSPT)

• Robust but lightweight aluminum construction

• Secondary pressure ranges 0-2 bar (0-30 psig), 0-4 bar,
(0-60 psig), 0-8 bar (0-125 psig)

• Secondary aspiration plus balanced poppet provides quick
response and accurate pressure regulation.

• Relieving & Non-relieving types

• Non-rising knob

P31 RA NP

Thread type Port size Mounting
1/4 2 Plastic panel mount nut P
BSPP 1

BSPT 2

NPT 9

Relief Adjustment range
Relieving
Non relieving B With square gauge With round gauge Without guage
Reverse flow / relieving N
R 2 bar (0.2 MPa)* 2 2 bar (0.2 MPa) Z 2 bar (0.2 MPa) Y

4 bar (0.4 MPa)* 4 4 bar (0.4 MPa) M 4 bar (0.4 MPa) L

8 bar (0.8 MPa)** 6 8 bar (0.8 MPa) G 8 bar (0.8 MPa) N

Port Description Order Code† Flow Max. Height Width Depth
size dm3/s (scfm) bar (psig) mm (inches)
mm (inches) mm (inches)
20 (300) 100.1 (3.94)
1/4" 8 bar (125 psig) relieving P31RA22BNNP 30 (64) 40 (1.58) 40 (1.58)
20 (300) 100.1 (3.94)
1/4" 8 bar (125 psig) + gauge P31RA22BN6P 30 (64) 40 (1.58) 64.3 (2.53)

* flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop.
† Standard part numbers shown in bold. For other models refer to Options chart above.

Parker Hannifin Corporation
Pneumatic Division - Asia

30

1002-1/Asia Dec 2010 P31 Series

Parker One Pneumatic

Specifications Flow Charts

Flow Capacity* 1/4 30 dm3/s (64 scfm) 1/4 Regulator
65.5°C (150°F)
Max. Operating Temperature 140 10 Inlet Pressure - 10 bar (145 psig)
20 bar (300 psig) 9
Max. Supply Pressure 0-2 bar (30 psig) Secondary Pressure - (psig)
Secondary Pressure - bar120 8
Adjusting Range Pressure 8.0 bar
100 7 116 psig
0-4 bar (60 psig) 80 6
5 6.3 bar
0-8 bar (125 psig) 60 4 91.4 psig

Port Size BSPP / BSPT / NPT 1/4 40 3 4.0 bar
2 58 psig
Gauge Port (2 ea.)** BSPP / BSPT / NPT 1/8 2.5 bar
20 1 36.3 psig
Weight 0.17 kg (0.37 lbs)
00 5 10 15 Flow 2- 0dm3/s 25 30 35 40
* Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3) psig). 0
** Non-gauge option only.
0 10 20 30 40 50 60 70 80
Materials of Construction Flow - (scfm)

Body Aluminum

Adjustment Knob Acetal

Body Cap ABS

Bonnet PBT

Diaphragm Assembly Brass / Nitrile

Bottom Plug 33% Glass-Filled Nylon

Valve Assembly Brass / Nitrile

Springs Steel
Nitrile
Seals Acetal Repair and Service Kits

Panel Nut Regulator repair kit - Relieving
Regulator repair kit - Non-relieving
Dimensions 64 Panel mount nut - Aluminum P31KA00RB
(2.53) Panel mount nut - Plastic P31KA00RC
40 37 Angle Bracket (uses panel mount threads) P31KA00MM
(1.58) (1.46) C-Bracket (fits to body) P31KA00MP
T-Bracket with body connector P31KA00MR
61 34.1 Body connector P31KA00MW
(2.4) (1.34) P31KA00MT
P31KA00CB
100.1
(3.94)

Gauges

Square flush mount gauge

NOTE: 31.7 mm (1.25 in.) hole required for panel nut mounting. 0-4 bar K4511SCR04B

! WARNING 0-10 bar K4511SCR11B

Product rupture can cause serious injury. 0-60 psig K4511SCR060
Do not connect regulator to bottled gas.
Do not exceed Maximum primary pressure rating. 0-150 psig K4511SCR150

CAUTION: 0-0.4 Mpa K45SCR04M

REGULATOR PRESSURE ADJUSTMENT – The working range of knob 0-1.1 Mpa K45SCR11M
adjustment is designed to permit outlet pressures within their full range.
Pressure adjustment beyond this range is also possible because the knob 40mm Round 1/8" center back mount K4515R1402B
is not a limiting device. This is a common characteristic of most industrial (Not for use with Common Port Regulators) K4515R1404B
regulators, and limiting devices may be obtained only by special design. For 0-2 bar (0-0.2 Mpa) K4515R1411B
best performance, regulated pressure should always be set by increasing 0-4 bar (0-0.4 Mpa)
the pressure up to the desired setting. 0-8 bar (0-0.8 Mpa)

For best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting.

Parker Hannifin Corporation
Pneumatic Division - Asia

31

1002-1/Asia Dec 2010 P31 Series

Parker One Pneumatic Symbols 2 12

Mini Common - P1 Regulator - P31 P1 3
1
P2 P2
P2
P2

Self relieving regulator Non relieving regulator
with gauge

P1

P1 • Manifold style regulator with line pressure on both sides.

Options: • Pressure output is at front or rear.
P31
• Integral 1/4" ports (NPT, BSPP & BSPT)

• Robust construction

• Secondary pressure ranges 0-2 bar (0-30 psig), 0-4 bar,
(0-60 psig), 0-8 bar (0-125 psig)

• Secondary aspiration plus balanced poppet provides quick
response and accurate pressure regulation

• Relieving & Non-relieving types

• Non-rising knob

P2 P2 P2 P2 NP

HA

Thread type Port size Mounting
1/4 2 Plastic panel mount nut P
BSPP 1
Adjustment range
BSPT 2 Without gauge
2 bar; 30 psig Y
NPT 9 Relief 4 bar; 60 psig L
Relieving 8 bar; 125 ps N
Non relieving B
N Order gauges separately - see next page.

Port Description Order Code† Flow Max. Height Width Depth
size dm3/s (scfm) bar (psig) mm (inches)
mm (inches) mm (inches)
20 (300) 100.1 (3.94)
1/4" 8 bar (125 psig) Relieving P31HA22BNNP 18 (38) 40 (1.58) 40 (1.58)

* flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop.
† Standard part numbers shown in bold. For other models refer to Options chart above.

Parker Hannifin Corporation
Pneumatic Division - Asia

32

1002-1/Asia Dec 2010 P31 Series

Parker One Pneumatic

Specifications Flow Charts

Flow Capacity* 1/4 18 dm3/s (38 scfm) 1/4 Common Regulator
65.5°C (150°F)
Max. Operating Temperature Inlet Pressure - 10 bar (145 psig)
20 bar (300 psig) 100 7
Max. Supply Pressure 0-2 bar (30 psig)
0-4 bar (60 psig)
Adjusting Range Pressure 0-8 bar (125 psig) Secondary Pressure - (psig) 6
Secondary Pressure - bar80
1/4
1/8 5
0.30 kg (0.66 lbs) 60 4 8.0 bar
116 psig
P1 Port Size (Inlet / Outlet) BSPP / BSPT / NPT 40 3
2 6.3 bar
P2 Regulated Ports (2 ea.) BSPP / BSPT / NPT 4.0 bar 91.4 psig
20 58 psig
Weight 1
2.5 bar
0 00 36.3 psig

* Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3) psig). 0 5 10 15 Flow 2- 0dm3/s 25 30 35 40

Materials of Construction 10 20 30 40 50 60 70 80
Flow - (scfm)

Body Zinc

Adjustment Knob Acetal

Body Cap ABS

Bonnet 33% Glass-filled PBT

Diaphragm Assembly Brass / Nitrile

Bottom Plug 33% Glass-filled Nylon

Valve Assembly Brass / Nitrile

Dimensions 20 40 Repair and Service Kits P31KA00RB
(0.79) (1.58) P31KA00RC
40 Regulator repair kit - Relieving P31KA00MM
(1.58) 34.1 Regulator repair kit - Non-relieving P31KA00MP
(1.34) Panel mount nut - Aluminum P31KA00MR
61 Panel mount nut - Plastic P31KA00MT
(2.4) Angle Bracket (uses panel mount threads) P31KA00CB
T-Bracket with body connector
100.1 Body connector
(3.94)

Gauges

1.25" Round 1/8" center back mount

0-60 psig / 0-4 bar K4513N18060

NOTE: 31.7 mm (1.25 in.) hole required for panel nut mounting. 0-160 psig / 0-11 bar K4513N18160

! WARNING For best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting.
Product rupture can cause serious injury.
Do not connect regulator to bottled gas.
Do not exceed Maximum primary pressure rating.

CAUTION:

REGULATOR PRESSURE ADJUSTMENT – The working range of knob
adjustment is designed to permit outlet pressures within their full range.
Pressure adjustment beyond this range is also possible because the knob
is not a limiting device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by special design. For
best performance, regulated pressure should always be set by increasing
the pressure up to the desired setting.

Parker Hannifin Corporation
Pneumatic Division - Asia

33

1002-1/Asia Dec 2010 P32 Series

Parker One Pneumatic Symbols
Compact Regulator – P32
3 12
Options: 12

Self relieving regulator Non relieving regulator
with gauge

• Integral 1/4", 3/8" or 1/2" ports (NPT, BSPP & BSPT)

• Robust but lightweight aluminum construction

• Secondary pressure ranges 0-2 bar (0-30 psig), 0-4 bar,
(0-60 psig), 0-8 bar (0-125 psig), 0-17 bar (0-250 psig)

• Secondary aspiration plus balanced poppet provides quick
response and accurate pressure regulation

• Relieving & Non-relieving types

• Non-rising knob

P32 RA NP

Thread type Port size Mounting
1/4 2 Plastic panel mount nut P
BSPP 1 3/8 3
1/2 4 Adjustment range
BSPT 2 With round gauge
2 bar; 30 psig; 0.2 MPa Z
NPT 9 4 bar; 60 psig; 0.4 MPa M
8 bar; 125 psig; 0.8 MPa G
Relief B 17 bar; 250 psig; 1.7 MPa J
Relieving N Without gauge
Non relieving R 2 bar; 30 psig; 0.2 MPa Y
Reverse flow / relieving 4 bar; 60 psig; 0.4 MPa L
8 bar; 125 psig; 0.8 MPa N
17 bar; 250 psig; 1.7 MPa H

Port Description Order Code† Flow Max. Height Width Depth
size dm3/s (scfm) bar (psig) mm (inches) mm (inches) mm (inches)
20 (300)
1/4" 8 bar (125 psig) Relieving P32RA22BNNP 41 (81) 20 (300) 136 (5.4) 60 (2.36) 60 (2.36)
20 (300) 136 (5.4) 60 (2.36) 60 (2.36)
1/4" 8 bar (125 psig) Relieving + Gauge P32RA22BNGP 41 (81) 20 (300) 136 (5.4) 60 (2.36) 60 (2.36)
20 (300) 136 (5.4) 60 (2.36) 60 (2.36)
3/8" 8 bar (125 psig) Relieving P32RA23BNNP 65 (138) 20 (300) 136 (5.4) 60 (2.36) 60 (2.36)
136 (5.4) 60 (2.36) 60 (2.36)
3/8" 8 bar (125 psig) Relieving + Gauge P32RA23BNGP 65 (138)

1/2" 8 bar (125 psig) Relieving P32RA24BNNP 67 (142)

1/2" 8 bar (125 psig) Relieving + Gauge P32RA24BNGP 67 (142)

* flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop.
† Standard part numbers shown in bold. For other models refer to Options chart above.

Parker Hannifin Corporation
Pneumatic Division - Asia

34

1002-1/Asia Dec 2010 P32 Series

Parker One Pneumatic

Specifications Flow Charts

Flow Capacity* 1/4 41 dm3/s (81 scfm) 1/4 Regulator
Inlet Pressure - 10 bar (145 psig)
3/8 65 dm3/s (138 scfm) 140 10
9
1/2 67 dm3/s (142 scfm) 120 8
Secondary Pressure - (psig)
Max. Operating Temperature 65.5°C (150°F) Secondary Pressure - bar100 7 8.0 bar
80 6 116 psig
Max. Supply Pressure 20 bar (300 psig) 5

Adjusting Range Pressure 0-2 bar (30 psig) 60 4 6.3 bar
40 3 91.4 psig
0-4 bar (60 psig)
2
0-8 bar (125 psig) 20 1 2.5 bar 4.0 bar
36.3 psig 58 psig

0-17 bar (250 psig) 00 0 10 20 30 40 50 60 70

Port Size BSPP / BSPT / NPT 1/4, 3/8, 1/2 Flow - dm3/s

Gauge Port (2 ea.) BSPP / BSPT / NPT 1/4 0 20 40 60 80 100 120 140
Flow - (scfm)
Weight 0.41 kg (0.90 lbs)
3/8 Regulator

* Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3) psig). 140 10 Inlet Pressure - 10 bar (145 psig)
9

120 8
Materials of Construction Secondary Pressure - (psig)
Secondary Pressure - bar100 7
Body Aluminum 80 6 6.3 bar 8.0 bar
5 91.4 psig 116 psig
60 4
Adjustment Knob Acetal 4.0 bar
40 3 58 psig
Body Cap ABS
2
Bonnet 33% Glass-filled nylon 20 1 2.5 bar
36.3 psig

Diaphragm Assembly Nitrile / Zinc 00
0 10 20 30 40 50 60 70 80
Bottom Plug 33% Glass-filled Nylon Flow - dm3/s

Valve Assembly Brass / Nitrile 0 20 40 60 80 100 120 140 160

Springs Main Regulating Valve Steel S.S. Flow - (scfm)

Seals Nitrile 1/2 Regulator
140 10 Inlet Pressure - 10 bar (145 psig)
Panel Nut Acetal 9
120 8
Secondary Pressure - (psig)
Dimensions Secondary Pressure - bar100 7 8.0 bar
116 psig
60 80 6
(2.36) 5 6.3 bar
91.4 psig
78.7 60 4
(3.1)
94 40 3 4.0 bar
136 65 (3.74) 2 2.5 bar 58 psig
(5.4) (2.57) 36.3 psig
20 1 10 20 30 40 50 60 70 80 90
93 Flow - dm3/s
(3.66) 00
0

0 20 40 60 80 100 120 140 160 180
Flow - (scfm)

30 60 Repair and Service Kits P32KA00RB
(1.2) (2.36) P32KA00RC
NOTE: 51 mm (2.00 in.)hole required for panel nut mounting. Regulator repair kit - Relieving P32KA00MM
Regulator repair kit - Non-relieving P32KA00MP
! WARNING Panel mount nut - Aluminum P32KA00MR
Panel mount nut - Plastic P32KA00MT
Product rupture can cause serious injury. Angle Bracket (uses panel mount threads) P32KA00MB
Do not connect regulator to bottled gas. T-Bracket with body connector P32KA00CB
Do not exceed Maximum primary pressure rating. T-Bracket
Body connector
CAUTION:
Gauges
REGULATOR PRESSURE ADJUSTMENT – The working range of knob
adjustment is designed to permit outlet pressures within their full range. 50mm (2") Round 1/4" center back mount
Pressure adjustment beyond this range is also possible because the knob
is not a limiting device. This is a common characteristic of most industrial 0-2 bar / 0-0.2 Mpa / 0-30 psig K4520R1402B
regulators, and limiting devices may be obtained only by special design. For 0-4 bar / 0-0.4 Mpa / 0-60 psig K4520R1404B
best performance, regulated pressure should always be set by increasing 0-11 bar / 0-1.1 Mpa / 0-160 psig K4520R1411B
the pressure up to the desired setting. 0-20 bar / 0-2 Mpa / 0-300 psig K4520R1420B

For best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting.

Parker Hannifin Corporation
Pneumatic Division - Asia

35

1002-1/Asia Dec 2010 P32 Series

Parker One Pneumatic Symbols
Compact Common P1 Regulator - P32
3 12
P2 12
P1
Self relieving regulator Non relieving regulator
P1 with gauge

P1 • Manifold style regulator with line pressure on both sides.

Options: • Pressure output is at front or rear.
P32
• Integral 1/4", 3/8" or 1/2" ports (NPT, BSPP & BSPT)

• Robust construction

• Secondary pressure ranges 0-2 bar (0-30 psig), 0-4 bar,
(0-60 psig), 0-8 bar (0-125 psig), 0-17 bar (0-250 psig)

• Secondary aspiration plus balanced poppet provides quick
response and accurate pressure regulation

• Relieving & Non-relieving types

• Non-rising knob

P2 P2 P2 P2 NP

HA

Thread type Port size Mounting
1/4 2 Plastic panel mount nut P
BSPP 1 3/8 3
1/2 4 Adjustment range
BSPT 2 Without gauge
2 bar; 30 psig; 0.2 MPa Y
NPT 9 4 bar; 60 psig; 0.4 MPa L
8 bar; 125 psig; 0.8 MPa N
Relief B 17 bar; 250 psig; 1.7 MPa H
Relieving N Order gauges separately- see next page.
Non relieving

Port Description Order Code† Flow Max. Height Width Depth
size dm3/s (scfm) bar (psig)
mm (inches) mm (inches) mm (inches)
20 (300)
1/4" 8 bar (125 psig) Relieving P32HA22BNNP 28 (59) 136 (5.4) 60 (2.36) 60 (2.36)
20 (300)
3/8" 8 bar (125 psig) Relieving P32HA23BNNP 28 (59) 136 (5.4) 60 (2.36) 60 (2.36)
20 (300)
1/2" 8 bar (125 psig) Relieving P32HA24BNNP 28 (59) 136 (5.4) 60 (2.36) 60 (2.36)

* flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop.
† Standard part numbers shown in bold. For other models refer to Options chart above.

Parker Hannifin Corporation
Pneumatic Division - Asia

36

1002-1/Asia Dec 2010 P32 Series

Parker One Pneumatic

Specifications Flow Charts

Flow Capacity* 1/4 28 dm3/s (59 scfm) P32 Common Port Regulator

3/8 28 dm3/s (59 scfm) Inlet Pressure - 10 bar (145 psig)
100 7
1/2 28 dm3/s (59 scfm)

Max. Operating Temperature 65.5°C (150°F) Secondary Pressure - (psig) 6
Secondary Pressure - bar80
Max. Supply Pressure 20 bar (300 psig)
5
Adjusting Range Pressure 0-2 bar (30 psig)
60 4

0-4 bar (60 psig) 40 3 8.0 bar
2 6.3 bar 116 psig
0-8 bar (125 psig) 91.4 psig
20
0-17 bar (250 psig) 1 2.5 bar 4.0 bar
36.3 psig 58 psig
0 00
Port Size BSPP / BSPT / NPT 1/4, 3/8, 1/2 10 20 Flow -30dm3/s 40 50 60
0 20 40 60 80 100 120
Gauge Port (2 ea.) BSPP / BSPT / NPT 1/4
Flow - (scfm)
Weight 0.50 kg (1.10 lbs)

* Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3) psig).

Materials of Construction

Body Zinc
Adjustment Knob Acetal
Body Cap ABS
Bonnet 33% Glass-filled nylon
Diaphragm Assembly Nitrile / Zinc
Bottom Plug 33% Glass-filled Nylon
Valve Assembly Brass / Nitrile
Springs Main Regulating Steel
Valve S.S.
Seals Nitrile
Panel Nut Acetal

Dimensions 94 Repair and Service Kits P32KA00RB
65 (3.74) P32KA00RC
60 (2.57) Regulator repair kit - Relieving P32KA00MM
(2.36) Regulator repair kit - Non-relieving P32KA00MP
93 Panel mount nut - Aluminum P32KA00MR
78.7 (3.66) Panel mount nut - Plastic P32KA00MT
(3.1) Angle Bracket (uses panel mount threads) P32KA00MB
T-Bracket with body connector P32KA00CB
136 T-Bracket
(5.4) Body connector

Gauges

30 60 50mm (2") Round 1/4" center back mount
(1.2) (2.36)
0-2 bar / 0-0.2 Mpa / 0-30 psig K4520R1402B
NOTE: 51 mm (2.00 in.)hole required for panel nut mounting. 0-4 bar / 0-0.4 Mpa / 0-60 psig K4520R1404B
0-11 bar / 0-1.1 Mpa / 0-160 psig K4520R1411B
! WARNING 0-20 bar / 0-2 Mpa / 0-300 psig K4520R1420B

Product rupture can cause serious injury. For best performance, regulated pressure should always be set by increasing the
Do not connect regulator to bottled gas. pressure up to the desired setting.
Do not exceed Maximum primary pressure rating.

CAUTION:

REGULATOR PRESSURE ADJUSTMENT – The working range of knob
adjustment is designed to permit outlet pressures within their full range.
Pressure adjustment beyond this range is also possible because the knob
is not a limiting device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by special design. For
best performance, regulated pressure should always be set by increasing
the pressure up to the desired setting.

Parker Hannifin Corporation
Pneumatic Division - Asia

37

1002-1/Asia Dec 2010 Symbols

Parker One Pneumatic 3 12
Standard Regulator - P33 12

Options: Self relieving regulator Non relieving regulator
with gauge

• Integral 1/2" or 3/4" ports (NPT, BSPP & BSPT)

• Robust but lightweight aluminum construction

• Secondary pressure ranges 0-2 bar (0-30 psig), 0-4 bar,
(0-60 psig), 0-8 bar (0-125 psig), 0-17 bar (0-250 psig)

• Secondary aspiration plus balanced poppet provides quick
response and accurate pressure regulation

• Relieving & Non-relieving types

• Non-rising knob

P33 RA NP

Thread type Port size Mounting
1/2 4 Plastic panel mount nut P
BSPP 1 3/4 6
Adjustment range
BSPT 2 With round gauge
2 bar; 30 psig; 0.2 MPa Z
NPT 9 4 bar; 60 psig; 0.4 MPa M
8 bar; 125 psig; 0.8 MPa G
Relief B 17 bar; 250 psig; 1.7 MPa J
Relieving N Without gauge
Non relieving R 2 bar; 30 psig; 0.2 MPa Y
Reverse flow / relieving 4 bar; 60 psig; 0.4 MPa L
8 bar; 125 psig; 0.8 MPa N
17 bar; 250 psig; 1.7 MPa H

Port Description Order Code† Flow Max. Height Width Depth
size dm3/s (scfm) bar (psig)
mm (inches) mm (inches) mm (inches)
20 (300)
1/2" 8 bar (125 psig) Relieving P33RA24BNNP 100 (212) 149 (5.9) 73 (2.9) 73 (2.9)
20 (300)
1/2" 8 bar (125 psig) Relieving + Gauge P33RA24BNGP 100 (212) 149 (5.9) 73 (2.9) 73 (2.9)
20 (300)
3/4" 8 bar (125 psig) Relieving P33RA26BNNP 100 (212) 149 (5.9) 73 (2.9) 73 (2.9)
20 (300)
3/4" 8 bar (125 psig) Relieving + Gauge P33RA26BNGP 100 (212) 149 (5.9) 73 (2.9) 73 (2.9)

* flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop.
† Standard part numbers shown in bold. For other models refer to Options chart above.

Parker Hannifin Corporation
Pneumatic Division - Asia

38

1002-1/Asia Dec 2010

Parker One Pneumatic

Specifications Flow Charts

Flow Capacity* 1/2 100 dm3/s (212 scfm) 1/2 Regulator

3/4 100 dm3/s (212 scfm) 140 10 Inlet Pressure - 10 bar (145 psig)
9
Max. Operating Temperature 65.5°C (150°F) Secondary Pressure - (psig)
Secondary Pressure - bar120 8
Max. Supply Pressure 20 bar (300 psig) 100 7 8.0 bar
116 psig
Adjusting Range Pressure 0-2 bar (30 psig) 80 6
5 6.3 bar
0-4 bar (60 psig) 91.4 psig
60 4
0-8 bar (125 psig) 40 3

0-17 bar (250 psig) 2 2.5 bar 4.0 bar
20 1 36.3 psig 58 psig
Port Size BSPP / BSPT / NPT 1/2, 3/4
00
Gauge Port (2 ea.) BSPP / BSPT / NPT 1/4 0 20 40 60 80 100 120 140
Flow - dm3/s
Weight 0.62 kg (1.37 lbs) 200 240 280
0 40 80 120 160
* Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3) psig). Flow - (scfm)

3/4 Regulator

Materials of Construction 140 10 Inlet Pressure - 10 bar (145 psig)
9

120 8
Body Aluminum Secondary Pressure - (psig)
Secondary Pressure - bar100 7 8.0 bar
Adjustment Knob Acetal 80 6 116 psig
5 6.3 bar
Body Cap ABS 60 4 91.4 psig

Bonnet 33% Glass-filled Nylon 40 3

Diaphragm Assembly Nitrile / Zinc 2 2.5 bar 4.0 bar
20 1 36.3 psig 58 psig
0 00
Valve Assembly Brass / Nitrile / Acetal 20 40 60 80 100 120 140 160
Flow - dm3/s
Springs Main Regulating Steel
Valve S.S. 0 40 80 120 160 200 240 280 300 340
Flow - (scfm)
Seals Nitrile

Panel Nut Acetal Repair and Service Kits

Dimensions Regulator repair kit - Relieving P33KA00RB
Regulator repair kit - Non-relieving P33KA00RC
108 Panel mount nut - Aluminum P33KA00MM
72 (4.27) Panel mount nut - Plastic P33KA00MP
(2.83) Angle Bracket (uses panel mount threads) P33KA00MR
T-Bracket with body connector P32KA00MT
83.8 T-Bracket P32KA00MB
(3.3) Body connector P32KA00CB

149
(5.9)

105 Gauges
(4.16)

50mm (2") Round 1/4" center back mount

37 73 0-2 bar / 0-0.2 Mpa / 0-30 psig K4520R1402B
(1.44) 73 (2.9) 0-4 bar / 0-0.4 Mpa / 0-60 psig K4520R1404B
0-11 bar / 0-1.1 Mpa / 0-160 psig K4520R1411B
(2.9) 0-20 bar / 0-2 Mpa / 0-300 psig K4520R1420B

NOTE: 61 mm (2.40 in.) hole required for panel nut mounting.

! WARNING For best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting.
Product rupture can cause serious injury.
Do not connect regulator to bottled gas.
Do not exceed Maximum primary pressure rating.

CAUTION:

REGULATOR PRESSURE ADJUSTMENT – The working range of knob
adjustment is designed to permit outlet pressures within their full range.
Pressure adjustment beyond this range is also possible because the knob
is not a limiting device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by special design. For
best performance, regulated pressure should always be set by increasing
the pressure up to the desired setting.

Parker Hannifin Corporation
Pneumatic Division - Asia

39

1002-1/Asia Dec 2010 Symbols P31 Series

Parker One Pneumatic 2

Mini Filter / Regulator - P31

1

Options: E • Integral 1/4" ports (NPT, BSPP & BSPT)
P31 EA • High efficiency 5 micron element as standard
• Excellent water removal efficiency
• Robust but lightweight aluminum construction
• Positive bayonet latch to ensure correct & safe fitting
Secondary pressure ranges 0-2 bar (0-30 psig), 0-4 bar,

(0-60 psig), 0-8 bar (0-125 psig)
• Secondary aspiration plus balanced poppet provides quick

response and accurate pressure regulation

NP

Thread type Drain type Mounting
Pulse drain
BSPP 1 Manual drain B Plastic panel P
M mount nut
BSPT 2

NPT 9

Port size 1 Relief Adjustment range
1/8 2
1/4 Relieving B With square gauge With round gauge Without guage

Element Non relieving N 2 bar (0.2 MPa)* 2 2 bar (0.2 MPa) Z 2 bar (0.2 MPa) Y
5µ Element E
4 bar (0.4 MPa)* 4 4 bar (0.4 MPa) M 4 bar (0.4 MPa) L

8 bar (0.8 MPa)** 6 8 bar (0.8 MPa) G 8 bar (0.8 MPa) N

Bowl type

Poly bowl with bowl guard G

Metal bowl without sight gauge M

Port Description Order Code† Flow Max. Height Width Depth
size dm3/s (scfm) bar (psig)
mm (inches) mm (inches) mm (inches)
10 (150)
1/4" 8 bar (125 psig) Relieving - Poly bowl - Manual drain P31EA22EGMBN6P 14 (30) 164.1 (6.46) 40 (1.58) 64 (2.53)
10 (150)
1/4" 8 bar (125 psig) Relieving - Poly bowl - Pulse drain P31EA22EGBBN6P 14 (30) 164.1 (6.46) 40 (1.58) 64 (2.53)
17 (250)
1/4" 8 bar (125 psig) Relieving - Metal bowl - Manual drain P31EA22EMMBN6P 14 (30) 164.1 (6.46) 40 (1.58) 64 (2.53)
17 (250)
1/4" 8 bar (125 psig) Relieving - Metal bowl - Pulse drain P31EA22EMBBN6P 14 (30) 164.1 (6.46) 40 (1.58) 64 (2.53)

* flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop.
† Standard part numbers shown in bold. For other models refer to Options chart above.

Parker Hannifin Corporation
Pneumatic Division - Asia

40

1002-1/Asia Dec 2010 P31 Series

Parker One Pneumatic

Specifications Flow Charts

Flow Capacity* 1/4 14 dm3/s (30.0 scfm) 1/4 Filter/Regulator
52°C (125°F)
Max. Operating Plastic Bowl 140 10 Inlet Pressure - 10 bar (145 psig)
65.5°C (150°F) 9
Temperature Metal Bowl 10 bar (150 psig)
17 bar (250 psig) 120 8
Max. Supply Plastic Bowl Secondary Pressure - (psig)
5 Micron Secondary Pressure - bar100 7
Pressure Metal Bowl 12 cm3 (0.4 US oz.) 8.0 bar
80 6 116 psig
Standard Filtration 0-2 bar (30 psig) 5
0-4 bar (60 psig) 6.3 bar
Useful Retention 0-8 bar (125 psig) 60 4 91.4 psig

Adjusting Range 1/4 40 3 2.5 bar 4.0 bar
1/8 2 36.3 psig 58 psig
0.19 kg (0.42 lbs)
Pressure 20 1

00 5 10 15 20 25 30 35
Flow - dm3/s


Port Size BSPP / BSPT / NPT 0 10 20 30 40 50 60 70
Flow - (scfm)
Gauge Port (2 ea.)** BSPP / BSPT / NPT

Weight

* Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3) psig). Repair and Service Kits

** Non-gauge option only.

Air quality: P31KA00BGM
Plastic bowl / Bowl guard manual drain P31KA00BMM
Within ISO 8573-1: 1991 Class 3 (Particulates) P31KA00BGB

Within ISO 8573-1: 2001 Class 6 (Particulates) Metal bowl / w/o sight gauge manual drain

Materials of Construction Plastic bowl / Bowl guard pulse drain

Body Aluminum Metal bowl / w/o sight gauge pulse drain P31KA00BMB
Acetal 5µ particle filter element P31KA00ESE
Adjustment Knob ABS Regulator repair kit - Relieving P31KA00RB
PBT Regulator repair kit - Non-relieving P31KA00RC
Body Cap Panel mount nut - Aluminum P31KA00MM
Polycarbonate Panel mount nut - Plastic P31KA00MP
Bonnet Aluminum Angle Bracket (uses panel mount threads) P31KA00MR
Nylon C-Bracket (fits to body) P31KA00MW
Bowl Plastic Bowl T-Bracket with body connector P31KA00MT
Polyethylene Body connector P31KA00CB
Metal Bowl Nitrile
Nitrile Gauges
Bowl Guard Steel

Filter Element Brass / Nitrile
Brass / Nitrile
Seals Plastic Bowl
Acetal
Metal Bowl

Springs

Valve Assembly

Diaphragm Assembly

Panel Nut

For best performance, regulated pressure should always be set by increasing the Square flush mount gauge
pressure up to the desired setting.

Dimensions 64 0-4 bar K4511SCR04B
37 (2.53) 0-10 bar K4511SCR11B
40 (1.45) 0-60 psig K4511SCR060
(1.58)

66 0-150 psig K4511SCR150

(2.6) 0-0.4 Mpa K45SCR04M

0-1.1 Mpa K45SCR11M

Note: 164.1 40mm Round 1/8" center back mount
Flush-mounted gauge (6.46) (Not for use with Common Port Regulators)
kits will not fit units 0-2 bar (0-0.2 Mpa)
originally purchased 0-4 bar (0-0.4 Mpa) K4515R1402B
with threaded gauge 0-8 bar (0-0.8 Mpa) K4515R1404B
ports. K4515R1411B

4mm (5/32") 33.3 Bowl For best performance, regulated pressure should always be set by increasing the
I.D. Tube (1.31) removal pressure up to the desired setting.
Barb fitting clear-

ance

! WARNING

Product rupture can cause serious injury.
Do not connect regulator to bottled gas.
Do not exceed Maximum primary pressure rating.

Parker Hannifin Corporation
Pneumatic Division - Asia

41

1002-1/Asia Dec 2010 Symbols 1 P32 Series

Parker One Pneumatic 2

Compact Filter / Regulator - P32

Options: • Integral 1/4", 3/8" or 1/2" ports (NPT, BSPP & BSPT)
P32 EA • High efficiency 5 micron element as standard
• Excellent water removal efficiency
• Robust but lightweight aluminum construction
• Positive bayonet latch to ensure correct & safe fitting
• Secondary pressure ranges 0-2 bar (0-30 psig), 0-4 bar,

(0-60 psig), 0-8 bar (0-125 psig), 0-17 bar (0-250 psig)
• Secondary aspiration plus balanced poppet provides quick

response and accurate pressure regulation

E NP

Thread type Port size Drain type Mounting
1/4 2 Manual drain
BSPP 1 3/8 3 Auto drain M Plastic panel P
1/2 4 A mount nut
BSPT 2

NPT 9 Adjustment range

Element Relief B With round gauge
5µ Element E Relieving N 2 bar; 30 psig; 0.2 MPa Z
Non relieving 4 bar; 60 psig; 0.4 MPa M
8 bar; 125 psig; 0.8 MPa G
Bowl type 17 bar; 250 psig; 1.7 MPa J
Without gauge
Poly bowl with bowl guard G 2 bar; 30 psig; 0.2 MPa Y
4 bar; 60 psig; 0.4 MPa L
Metal bowl without sight gauge M 8 bar; 125 psig; 0.8 MPa N
17 bar; 250 psig; 1.7 MPa H
Metal bowl with sight gauge S

Port Description Order Code† Flow Max. Height Width Depth
size dm3/s (scfm) bar (psig) mm (inches) mm (inches) mm (inches)
10 (150) 254 (10.0)
1/4" 8 bar (125 psig) Relieving - Poly bowl - Manual drain P32EA22EGMBNGP 42 (89) 10 (150) 248 (9.76) 60 (2.36) 60 (2.36)
17 (250) 245 (9.66) 60 (2.36) 60 (2.36)
1/4" 8 bar (125 psig) Relieving - Poly bowl - Auto drain P32EA22EGABNGP 42 (89) 17 (250) 254 (10.0) 60 (2.36) 60 (2.36)
10 (150) 254 (10.0) 60 (2.36) 95 (3.74)
1/4" 8 bar (125 psig) Relieving - Metal bowl - Manual drain P32EA22ESMBNGP 42 (89) 10 (150) 248 (9.76) 60 (2.36) 60 (2.36)
17 (250) 245 (9.66) 60 (2.36) 60 (2.36)
1/4" 8 bar (125 psig) Relieving - Metal bowl - Auto drain P32EA22ESABNGP 42 (89) 17 (250) 254 (10.0) 60 (2.36) 60 (2.36)
10 (150) 245 (9.66) 60 (2.36) 95 (3.74)
3/8" 8 bar (125 psig) Relieving - Poly bowl - Manual drain P32EA23EGMBNGP 58 (123) 10 (150) 248 (9.76) 60 (2.36) 95 (3.74)
17 (250) 245 (9.66) 60 (2.36) 95 (3.74)
3/8" 8 bar (125 psig) Relieving - Poly bowl - Auto drain P32EA23EGABNGP 58 (123) 17 (250) 254 (10.0) 60 (2.36) 60 (2.36)
60 (2.36) 60 (2.36)
3/8" 8 bar (125 psig) Relieving - Metal bowl - Manual drain P32EA23ESMBNGP 58 (123)

3/8" 8 bar (125 psig) Relieving - Metal bowl - Auto drain P32EA23ESABNGP 58 (123)

1/2" 8 bar (125 psig) Relieving - Poly bowl - Manual drain P32EA24EGMBNGP 64 (136)

1/2" 8 bar (125 psig) Relieving - Poly bowl - Auto drain P32EA24EGABNGP 64 (136)

1/2" 8 bar (125 psig) Relieving - Metal bowl - Manual drain P32EA24ESMBNGP 64 (136)

1/2" 8 bar (125 psig) Relieving - Metal bowl - Auto drain P32EA24ESABNGP 64 (136)

* flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop.
† Standard part numbers shown in bold. For other models refer to Options chart above.

Parker Hannifin Corporation
Pneumatic Division - Asia

42

1002-1/Asia Dec 2010 P32 Series

Parker One Pneumatic

Specifications Flow Charts

Flow Capacity* 1/4 42 dm3/s (89 scfm) 1/4 Filter/Regulator
3/8 58 dm3/s (123 scfm)
1/2 64 dm3/s (136 scfm) 140 10 Inlet Pressure - 10 bar (145 psig)
9
52°C (125°F)
65.5°C (150°F) 120 8
Max. Operating Plastic Bowl 10 bar (150 psig) Secondary Pressure - (psig)
17 bar (250 psig) Secondary Pressure - bar100 7
Temperature Metal Bowl 80 6 8.0 bar
5 Micron 5 116 psig
51 cm3 (1.7 US oz.)
Max. Supply Plastic Bowl 60 4 6.3 bar
0-2 bar (30 psig) 4.0 bar 91.4 psig
Pressure Metal Bowl 0-4 bar (60 psig) 40 3 58 psig
0-8 bar (125 psig) 2
Standard Filtration 0-17 bar (250 psig) 2.5 bar
20 1 36.3 psig
1/4, 3/8, 1/2
Useful Retention† 1/4 00 0 10 20 30 40 50 60 70

Adjusting Range 0.53 kg (1.17 lbs) Flow - dm3/s

Pressure 0 20 40 60 80 100 120 140
Flow - (scfm)
3/8 Filter/Regulator

Inlet Pressure - 10 bar (145 psig)
140 10

9
120 8
Port Size BSPP / BSPT / NPT Secondary Pressure - (psig)
Secondary Pressure - bar100 7
Gauge Port (2 ea.) BSPP / BSPT / NPT 80 6 8.0 bar
5 116 psig
Weight 60 4
6.3 bar
* Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3) psig). 40 3 4.0 bar 91.4 psig
† Useful retention refers to volume below the quiet zone baffle. 2 58 psig
2.5 bar
Air quality: 20 1 36.3 psig
Within ISO 8573-1: 1991 Class 3 (Particulates)
Within ISO 8573-1: 2001 Class 6 (Particulates) 00 10 20 30 40 50 60 70 80
0 Flow - dm3/s
Materials of Construction
0 20 40 60 80 100 120 140 160
Flow - (SCFM)
1/2 Filter/Regulator
Body Aluminum
140 10 Inlet Pressure - 10 bar (145 psig)
Adjustment Knob Acetal 9

Body Cap ABS 120 8
Secondary Pressure - (psig)
Element Retainer / Baffle Acetal Secondary Pressure - bar100 7 8.0 bar
116 psig
Bowl Plastic Bowl Polycarbonate 80 6
5 6.3 bar
Metal Bowl Zinc 91.4 psig 4.0 bar
60 4 58 psig
Bowl Guard Nylon 2.5 bar
40 3 36.3 psig
Filter Element Sintered Polyethylene 2

20 1

Seals Plastic Bowl Nitrile 00
0 10 20 30 40 50 60 70 80 90
Flow - dm3/s

Metal Bowl Nitrile 0 20 40 60 80 100 120 140 160 180
Flow - (scfm)

Springs Main Regulating / Valve Steel / S.S. Repair and Service Kits

Valve Assembly Brass / Nitrile

Diaphragm Assembly Nitrile / Zinc Plastic bowl / Bowl guard manual drain P32KA00BGM
Metal bowl / Sight gauge manual drain P32KA00BSM
Panel Nut Acetal Auto drain P32KA00DA
5µ particle filter element P32KA00ESE
Sight Gauge Metal Bowl Polycarbonate Regulator repair kit - Relieving P32KA00RB
Regulator repair kit - Non-relieving P32KA00RC
Dimensions Panel mount nut - Aluminum P32KA00MM
Panel mount nut - Plastic P32KA00MP
60 60 Angle Bracket (fits to panel mount threads) P32KA00MR
30 (2.36) (2.36) T-Bracket (fits to body connector) P32KA00MB
(1.2) T-Bracket with body connector P32KA00MT
Body connector P32KA00CB
93
(3.66) Gauges

254
(10.0)

50mm (2") Round 1/4" center back mount

0-2 bar / 0-0.2 Mpa / 0-30 psig K4520R1402B

4.8 mm (.19) Bowl 65 Use 10mm 0-4 bar / 0-0.4 Mpa / 0-60 psig K4520R1404B
I.D. Tube removal (2.57) 95 or 3/8" Flex 0-11 bar / 0-1.1 Mpa / 0-160 psig K4520R1411B
Barb fitting clearance. Tubing 0-20 bar / 0-2 Mpa / 0-300 psig K4520R1420B
41 (Manual and (3.74) Automatic Drain
Manual Drain (1.6) Auto Drain.) For best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting.
! WARNING

Product rupture can cause serious injury.
Do not connect regulator to bottled gas.
Do not exceed Maximum primary pressure rating.

Parker Hannifin Corporation
Pneumatic Division - Asia

43

1002-1/Asia Dec 2010 Symbols P33 Series

Parker One Pneumatic 2

Standard Filter / Regulator - P33

1

Options: • Integral 1/2" or 3/4" ports (NPT, BSPP & BSPT)
P33 EA • High efficiency 5 micron element as standard
• Excellent water removal efficiency
• Robust but lightweight aluminum construction
• Positive bayonet latch to ensure correct & safe fitting
• Secondary pressure ranges 0-2 bar (0-30 psig), 0-4 bar,

(0-60 psig), 0-8 bar (0-125 psig), 0-17 bar (0-250 psig)
• Secondary aspiration plus balanced poppet provides quick

response and accurate pressure regulation

E NP

Thread type Port size Drain type Mounting
1/2 4 Manual drain
BSPP 1 3/4 6 Auto drain M Plastic panel P
A mount nut
BSPT 2

NPT 9 Adjustment range

Element Relief B With round gauge
5µ Element E Relieving N 2 bar; 30 psig; 0.2 MPa Z
Non relieving 4 bar; 60 psig; 0.4 MPa M
8 bar; 125 psig; 0.8 MPa G
Bowl type 17 bar; 250 psig; 1.7 MPa J
Without gauge
Poly bowl with bowl guard G 2 bar; 30 psig; 0.2 MPa Y
4 bar; 60 psig; 0.4 MPa L
Metal bowl without sight gauge M 8 bar; 125 psig; 0.8 MPa N
17 bar; 250 psig; 1.7 MPa H
Metal bowl with sight gauge S

Port Description Order Code† Flow Max. Height Width Depth
size dm3/s (scfm) bar (psig)
10 (150) mm (inches) mm (inches) mm (inches)
10 (150)
1/2" 8 bar (125 psig) Relieving - Poly bowl - Manual drain P33EA24EGMBNGP 90 (191) 17 (250) 291 (11.44) 73 (2.9) 73 (2.9)
17 (250)
1/2" 8 bar (125 psig) Relieving - Poly bowl - Auto drain P33EA24EGABNGP 90 (191) 10 (150) 285 (11.22) 73 (2.9) 73 (2.9)
10 (150)
1/2" 8 bar (125 psig) Relieving - Metal bowl - Manual drain P33EA24ESMBNGP 90 (191) 17 (250) 282 (11.0) 73 (2.9) 73 (2.9)
17 (250)
1/2" 8 bar (125 psig) Relieving - Metal bowl - Auto drain P33EA24ESABNGP 90 (191) 291 (11.44) 73 (2.9) 108 (4.27)

3/4" 8 bar (125 psig) Relieving - Poly bowl - Manual drain P33EA26EGMBNGP 98 (208) 282 (11.0) 73 (2.9) 108 (4.27)

3/4" 8 bar (125 psig) Relieving - Poly bowl - Auto drain P33EA26EGABNGP 98 (208) 285 (11.22) 73 (2.9) 108 (4.27)

3/4" 8 bar (125 psig) Relieving - Metal bowl - Manual drain P33EA26ESMBNGP 98 (208) 291 (11.44) 73 (2.9) 73 (2.9)

3/4" 8 bar (125 psig) Relieving - Metal bowl - Auto drain P33EA26ESABNGP 98 (208) 282 (11.0) 73 (2.9) 73 (2.9)

* flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop.
† Standard part numbers shown in bold. For other models refer to Options chart above.

Parker Hannifin Corporation
Pneumatic Division - Asia

44

1002-1/Asia Dec 2010 P33 Series

Parker One Pneumatic

Specifications Flow Charts

Flow Capacity* 1/2 90 dm3/s (191 scfm) 1/2 Filter/Regulator
3/4 98 dm3/s (208 scfm)
140 10 Inlet Pressure - 10 bar (145 psig)
Max. Operating Plastic Bowl 52°C (125°F) 9

Temperature Metal Bowl 65.5°C (150°F) 120 8
Secondary Pressure - (psig)
Supply Plastic Bowl 10 bar (150 psig) Secondary Pressure - bar100 7 8.0 bar
80 6 116 psig
Pressure Metal Bowl 17 bar (250 psig) 5
60 4 6.5 bar
Standard Filtration 5 Micron 94.3 psig 4.0 bar
40 3 58 psig
Useful Retention† 85 cm3 (2.8 US oz.)
2
20 1
Adjusting Range 0-2 bar (30 psig) 2.5 bar
00 36.3 psig

Pressure 0-4 bar (60 psig) 0 10 20 30 40 50 60 70 80 90 100 110 120 130
Flow - dm3/s
0-8 bar (125 psig)
0 20 40 60 80 100 120 140 160 180 200 220 240 260
0-17 bar (250 psig) Flow - (scfm)

Port Size BSPP / BSPT / NPT 1/2, 3/4 3/4 Filter/Regulator

Gauge Port (2 ea.) BSPP / BSPT / NPT 1/4 Inlet Pressure - 10 bar (145 psig)
140 10
Weight 0.85 kg (1.87 lbs)
9
* Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3) psig). 120 8
Secondary Pressure - (psig)
† U seful retention refers to volume below the quiet zone baffle. Secondary Pressure - bar100 7 8.0 bar
80 6 116 psig
Air quality: 5
60 4 6.5 bar
Within ISO 8573-1: 1991 Class 3 (Particulates) 94.3 psig
40 3
Within ISO 8573-1: 2001 Class 6 (Particulates) 4.0 bar
58 psig
Materials of Construction
2 2.5 bar
Body Aluminum 20 1 36.3 psig
Acetal
Adjustment Knob ABS 00
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
Body Cap Polycarbonate Flow - dm3/s
Aluminum
Element Retainer / Baffle Acetal 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
Sintered Polyethylene Flow - (scfm)
Nitrile
Bowls Plastic Bowl Nitrile

Metal Bowl Steel / S.S.
Brass / Nitrile
Filter Element Repair and Service Kits
Nitrile / Zinc
Seals Plastic Bowl Acetal Plastic bowl / Bowl guard manual drain P33KA00BGM
Metal bowl / Sight gauge manual drain P33KA00BSM
Metal Bowl Polycarbonate Auto drain P32KA00DA
5µ particle filter element P33KA00ESE
Springs Main Regulating / Valve Regulator repair kit - Relieving P33KA00RB
Regulator repair kit - Non-relieving P33KA00RC
Valve Assembly Panel mount nut - Aluminum P33KA00MM
Panel mount nut - Plastic P33KA00MP
Diaphragm Assembly Angle Bracket (fits to panel mount threads) P33KA00MR
T-Bracket (fits to body connector) P32KA00MB
Panel Nut T-Bracket with body connector P32KA00MT
Body connector P32KA00CB
Sight Gauge Metal Bowl

Dimensions

37 73 73
(1.44) (2.9) (2.9)

104
(4.1)

291 Gauges
(11.44)

50mm (2") Round 1/4" center back mount

4.8 mm (.19) Bowl Use 10mm 0-2 bar / 0-0.2 Mpa / 0-30 psig K4520R1402B
I.D. Tube removal or 3/8" Flex 0-4 bar / 0-0.4 Mpa / 0-60 psig K4520R1404B
Barb fitting 51 clearance. 72 Tubing 0-11 bar / 0-1.1 Mpa / 0-160 psig K4520R1411B
(2.0) (Manual and (2.83) 108 Automatic Drain 0-20 bar / 0-2 Mpa / 0-300 psig K4520R1420B
Manual Drain
Auto Drain.) (4.27) For best performance, regulated pressure should always be set by increasing
the pressure up to the desired setting.

! WARNING

Product rupture can cause serious injury.
Do not connect regulator to bottled gas.
Do not exceed Maximum primary pressure rating.

Parker Hannifin Corporation
Pneumatic Division - Asia

45

1002-1/Asia Dec 2010 P31 Series

Parker One Pneumatic Symbols

Mini Lubricator - P31

12

Lubricator
with drain

• Integral 1/4" ports (NPT, BSPP & BSPT)
• Robust but lightweight aluminum construction
• Proportional oil delivery over a wide range of air flows
• Finger tip rachet control for precise oil drip rate adjustment

Options: L NN
P31 LA

Thread type Port size Bowl type Mounting
1/8 No bracket
BSPP 1 1/4 1 Poly bowl with bowl guard G N
2
BSPT 2 Metal bowl without sight gauge M

NPT 9

Type Drain type
Oil mist standard sight dome L No drain; closed end N

Port Description Order Code† Flow Max. Height Width Depth
size dm3/s (scfm) bar (psig) mm (inches) mm (inches) mm (inches)

1/4" Poly bowl - No drain P31LA22LGNN 13 (28) 10 (150) 147.5 (5.80) 40 (1.58) 42.7 (1.68)

1/4" Metal bowl - No drain P31LA22LMNN 13 (28) 17 (250) 147.5 (5.80) 40 (1.58) 42.7 (1.68)

* flow with 6.3 bar (91.3 psig) inlet pressure and 0.34 bar (4.9 psig) pressure drop.
† Standard part numbers shown in bold. For other models refer to Options chart above.

Parker Hannifin Corporation
Pneumatic Division - Asia

46

1002-1/Asia Dec 2010 P31 Series

Parker One Pneumatic

Specifications Flow Charts

Flow Capacity* 1/4 13 dm3/s (28 scfm) 1/4 Lubricator
Max. Operating Plastic Bowl 52°C (125°F)
Temperature Metal Bowl Primary Pressure - bar 1.6 4.0 6.3 10
65.5°C (150°F) 7 0.5 Primary Pressure - psig 23.2 58 91.4 145

Max. Supply Plastic Bowl 10 bar (150 psig) Pressure Drop - (psig) 6 0.4
Pressure Drop - bar5
Pressure Metal Bowl 17 bar (250 psig) 4 0.3

Useful Retention 18 cm3 (0.6 US oz.)

Port Size BSPP / BSPT / NPT 1/4 3 0.2
2
Weight 0.13 kg (0.29 lbs) 1 0.1

* Inlet pressure 6.3 bar (91.3 psig). Pressure drop 0.34 bar (4.9 psig).

Materials of Construction 00 5 10 15 20 25
0 Flow - dm3/s 40 50
0
10 20 30
Flow - (scfm)

Body Aluminum

Body Cap ABS

Bowl Plastic Bowl Polycarbonate

Metal Bowl Aluminum

Seals Plastic Bowl Nitrile

Metal Bowl Nitrile

Sight Dome Polycarbonate

Suggested Lubricant ISO / ASTM VG32

Pick-up Filter Sintered Bronze

Dimensions Repair and Service Kits

40 Plastic bowl / Bowl guard no drain P31KA00BGN
(1.58)
42.7 Drip control assembly P32KA00PG
147.5 (1.68)
(5.8) 21.3 Fill plug P31KA00PL
(0.84)
C-Bracket (fits to body) P31KA00MW
57.2
(2.25) T-Bracket with body connector P31KA00MT

Body connector P31KA00CB

12.7 Bowl Suggested Lubricant ............................................... F442 Oil
(0.5) removal Petroleum based oil of 100 to 200 SUS viscosity at 38°C
clearance (100°F) and an aniline point greater than 93°C (200°F)
(DO NOT USE OILS WITH ADDITIVES, COMPOUNDED
OILS CONTAINING SOLVENTS, GRAPHITE, DETERGENTS,
OR SYNTHETIC OILS.)

Parker Hannifin Corporation
Pneumatic Division - Asia

47

1002-1/Asia Dec 2010 P32 Series

Parker One Pneumatic Symbols

Compact Lubricator - P32

12

Lubricator
with drain

• Integral 1/4", 3/8" or 1/2" ports (NPT, BSPP & BSPT)
• Robust but lightweight aluminum construction
• Proportional oil delivery over a wide range of air flows
• Finger tip rachet control for precise oil drip rate adjustment
• Fill from top under system pressure

Options: L NN
P32 LA

Thread type Port size Bowl type Mounting
1/4 2 Poly bowl with bowl guard No bracket
BSPP 1 3/8 3 Metal bowl with sight gauge G N
1/2 4 S
BSPT 2
Type
NPT 9 Oil mist standard sight dome L

Drain type
No drain; closed end N

Port Description Order Code† Flow Max. Height Width Depth
size dm3/s (scfm) bar (psig) mm (inches) mm (inches) mm (inches)
10 (150) 211 (8.30)
1/4" Poly bowl - No drain P32LA22LGNN 18 (38) 17 (250) 211 (8.30) 60 (2.36) 60 (2.36)
10 (150) 211 (8.30) 60 (2.36) 60 (2.36)
1/4" Metal bowl - No drain P32LA22LSNN 18 (38) 17 (250) 211 (8.30) 60 (2.36) 60 (2.36)
10 (150) 211 (8.30) 60 (2.36) 60 (2.36)
3/8" Poly bowl - No drain P32LA23LGNN 32 (68) 17 (250) 211 (8.30) 60 (2.36) 60 (2.36)
60 (2.36) 60 (2.36)
3/8" Metal bowl - No drain P32LA23LSNN 32 (68)

1/2" Poly bowl - No drain P32LA24LGNN 47 (100)

1/2" Metal bowl - No drain P32LA24LSNN 47 (100)

* flow with 6.3 bar (91.3 psig) inlet pressure and 0.34 bar (4.9 psig) pressure drop.
† Standard part numbers shown in bold. For other models refer to Options chart above.

Parker Hannifin Corporation
Pneumatic Division - Asia

48

1002-1/Asia Dec 2010 P32 Series

Parker One Pneumatic

Specifications Flow Charts

Flow Capacity* 1/4 18 dm3/s (38 scfm) 1/4 Lubricator

3/8 32 dm3/s (68 scfm) Primary Pressure - bar 1.6 4.0 6.3 10
7 0.5 Primary Pressure - psig
1/2 47 dm3/s (100 scfm) 23.2 58 91.4 145

Max. Operating Plastic Bowl 52°C (125°F) Pressure Drop - (psig) 6 0.4
Pressure Drop - bar
Temperature Metal Bowl 65.5°C (150°F) 5
4 0.3
Max. Supply Plastic Bowl 10 bar (150 psig)

Pressure Metal Bowl 17 bar (250 psig) 3 0.2
2
Useful Retention 121 cm3 (4.09 US oz.) 1 0.1

Port Size BSPP / BSPT / NPT 1/4, 3/8, 1/2 00
0
Weight 0.31 kg (0.68 lbs) 10 Flow - dm3/s 20 30
30 40 60
* Inlet pressure 6.3 bar (91.3 psig). Pressure drop 0.34 bar (4.9 psig). 0 10 20 50
Flow - (scfm)

Materials of Construction 3/8 Lubricator

Body Aluminum Primary Pressure - bar 1.6 4.0 6.3 10
ABS 7 0.5 Primary Pressure - psig 23.2 58 91.4 145
Body Cap
Polycarbonate
Bowls Plastic Bowl Aluminum Pressure Drop - (psig) 6 0.4
Nitrile Pressure Drop - bar
Metal Bowl Nitrile 5
4 0.3
Seals Plastic Bowl

Metal Bowl 3 0.2
2
Sight Dome Polycarbonate 1 0.1
Polycarbonate
Sight Gauge Metal Bowl ISO / ASTM VG32 00
Sintered Bronze 0
Suggested Lubricant 10 20 30 40 50 60 70
Flow - dm3/s 100 120 140
Pick-up Filter 0 20 40 60 80
Flow - (scfm)

1/2 Lubricator

Primary Pressure - bar 1.6 4.0 6.3 10
7 0.5 Primary Pressure - psig 23.2 58 91.4 145

Pressure Drop - (psig) 6 0.4
Pressure Drop - bar
5
4 0.3

Dimensions 3 0.2
2
60 1 0.1
(2.36)
30 60 0 00 10 20 30 40 50 60 70 80
(1.18) (2.36) 0 Flow - dm3/s

20 40 60 80 100 120 140 160
Flow - (scfm)

Repair and Service Kits

61 Plastic bowl / Bowl guard no drain P32KA00BGN
(2.40)

Drip control assembly P31KA00PG

Fill plug P32KA00PL

L-Bracket (fits to body) P32KA00ML

211 T-Bracket (fits to body connector) P32KA00MB
(8.30)
T-Bracket with body connector P32KA00MT

Body connector P32KA00CB

(14.610)rBceloemwaorlavnacl e Suggested Lubricant ............................................... F442 Oil

Petroleum based oil of 100 to 200 SUS viscosity at 38°C
(100°F) and an aniline point greater than 93°C (200°F)

(DO NOT USE OILS WITH ADDITIVES, COMPOUNDED
OILS CONTAINING SOLVENTS, GRAPHITE, DETERGENTS,
OR SYNTHETIC OILS.)

Parker Hannifin Corporation
Pneumatic Division - Asia

49

1002-1/Asia Dec 2010 P33 Series

Parker One Pneumatic Symbols 12
Lubricator
Standard Lubricator - P33 with drain

• Integral 1/2" or 3/4" ports (NPT, BSPP & BSPT)
• Robust but lightweight aluminum construction
• Proportional oil delivery over a wide range of air flows
• Finger tip rachet control for precise oil drip rate adjustment
• Fill from top under system pressure

Options: L NN
P33 LA

Thread type Port size Bowl type Mounting
1/2 4 Poly bowl with bowl guard No bracket
BSPP 1 3/4 6 Metal bowl with sight gauge G N
S
BSPT 2

NPT 9

Type Drain type
Oil mist standard sight dome L No drain; closed end N

Port Description Order Code† Flow Max. Height Width Depth
size dm3/s (scfm) bar (psig) mm (inches) mm (inches) mm (inches)

1/2" Poly bowl - No drain P33LA24LGNN 48 (102) 10 (150) 234 (9.21) 73 (2.9) 73 (2.9)

1/2" Metal bowl - No drain P33LA24LSNN 48 (102) 17 (250) 234 (9.21) 73 (2.9) 73 (2.9)

3/4" Poly bowl - No drain P33LA26LGNN 68 (144) 10 (150) 234 (9.21) 73 (2.9) 73 (2.9)

3/4" Metal bowl - No drain P33LA26LSNN 68 (144) 17 (250) 234 (9.21) 73 (2.9) 73 (2.9)

* flow with 6.3 bar (91.3 psig) inlet pressure and 0.34 bar (4.9 psig) pressure drop.
† Standard part numbers shown in bold. For other models refer to Options chart above.

Parker Hannifin Corporation
Pneumatic Division - Asia

50