Fluid Fittings Product 2018

CK / GREYSCALE VERSION

F FLUIDEXCELFLEitNtiCnEgsIN SERVICE

essary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:

:
- Pantone Black

TTING RING COUPLING- Cool Grey 10

K:

Black RGB:
maximuCM::m00 for the seRRe:rd7i5es depBRl:ea0cnk ding on Tube size.
king pKYr::e100s0 sures seGBe:: 7755the foGBl::l0o0 wing pages of this

endently from the fluid used, provided that no
nal pressures not be trespassed. Fittings are
cording to the required working conditions.
um working pressures up to 100 bar.
ure applications, however not over 315 bar.
pressures, water hammering, high temperatures

change the fitting’s performance that, even at
bsolute reliability.

INGS 24 HOURS. B35

BLAC

FHIGH QUALITY PRODUCTS

If nece

Spot:
Black
Grey -

CMYK

QUALITY ASSURANCE ACCORDING TO UNI Grey
The Quality Assurance system complies with EUNNIIYMCSE:::O000N
certification authority recognized by IQNET at EuropeK:a7n0

CAST S.p.A. has also obtained the DVGW product om

omologation for carbon and stainless steel fittings with B

Quality Service will issue certificates of origin for the ma

Our Quality Experts are always ready to provide custom

provide documentation of the traceability system applied

COMPONENT TESTING
In addition to the normal dimensional checks carried out d
product, practical tightness and fatigue tests, coupling t
CAST fittings. At the customer’s request out Product Test
carried out: dimensional and geometrical test, checking
high pressure (maximum operating pressure +33%) as p
carried out by various Third Part Authorities including: RI
Veritas - Germanischer Lloyd - American Bureau of Ship

SAFETY FACTORS
B3 rings provide the right answer to safety problems so
steel tube and the fitting body is guaranteed by the doub
steel tube (assured by the particular shape of the ring).
CAST’s product range fully complies with the constructio
The nominal operating pressures (bar) given in the catal
(including pressure peaks). For higher pressure the item
for specific applications.
The safety factor is 4:1 and is intended with static load a
per DIN 3861 (24º cone) for tube connection. The same
fittings with elastomeric seal. For stud couplings with tap
seal safety factor is 2.5:1.
Is understood that the product is guaranteed only if the f
products and components.

PH: 0800 FITTI

CK / GREYSCALE VERSION

F FLUIDEXCELFLEitNtiCnEgsIN SERVICE

essary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:

:
- Pantone Black
- Cool Grey 10

K:

O 9001 Black RGB:
N ISO
C: 0 Red Black issued by the RINA

MY9::00001, certificaRGt::e7755 (N 90/GR9:: 004)
n level. K: 100 B: 75 B: 0

mologation for stainless steel fittings, and DNV product

B3 and B4 cutting rings. At the customer’s request, our

aterials used to manufacture the products delivered.

mers with advice, to guide them around our facilities as to

d.

during machining, percentage inspections of the finished
tests between the various parts are also carried out on
t and Inspection Service issues the certificate of the tests
of static seal at low and high pressure, dynamic seal at
per ISO 8434-5. If required by the customer, tests can be
INA - DVGW - Lloyd’s Register of Shipping - Det Norske
pping (to be specified on the order).

that absolute functional reliability between the ring, the
ble clinching and automatic locking of the cuts on the

on parameters of reference standards.
logue indicate the maximum permissible pressures
ms must be tested in accordance with the manufacturer

and with the temperature at the values indicated as
safety factor 4:1 is intended for parallel threaded end

per or parallel threaded end fittings with metal to metal

full connection is made entirely with CAST S.p.A.

INGS 24 HOURS. B36

BLAC

FHIGH QUALITY PRODUCTS

If nece

Spot:

TUBE FITTING WORBlack
Grey -

& THREAD DCMYK
Grey
C: 0

M: 0

Y: 0

K: 70

Allowed for B3 Rings

• Definition of cone sizes to DIN 3861 S
• Thread diameters to DIN 3853 Stand

PH: 0800 FITTI

CK / GREYSCALE VERSION

F FLUIDEXCELFLEitNtiCnEgsIN SERVICE

essary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:

:
- Pantone Black

RKING PRESSURES- Cool Grey 10

K:

DIMENSIONSBlack
RGB:

C: 0 Red Black
R: 0
M: 0 R: 75 G: 0
B: 0
Y: 0 G: 75

K: 100 B: 75

Standards
dards

INGS 24 HOURS. B37

BLAC

FHIGH QUALITY PRODUCTS

If nece

Spot:

GENERAL ASSEMBBlack
Grey -

CMYK
Grey

The Metric Cutting Ring Tube Fitting will onlMCy::00f
whole tightening phase the tube must be in toYK::u070c
this does not happen the ring will advance with
failure of the connection.
The fitting should not be used to correct a wrong
Extremely long tube or tube undergoing high s
E) or some type of support to avoid excessive
the fittings and or system.

CARBON STEEL FITTINGS
High quality tube must be used to assure corre
which is not compliant with the below standard
and also voids any guarantee from the fitting m
37.4 Cold Drawn Seamless to DIN 2391/C (Sec
hardness is 75 HRB.

All carbon steel tube with a diameter of more tha
blocks or a fitting clamped in a vice. Remembe
has been pre-formed onto the tube using the in
the pre-assembly block or fitting then final asse
can be effected.

STAINLESS STEEL FITTINGS
High quality tube must be used to assure cor
tube which is not compliant with the below stan
fitting and also voids any guarantee from the fit
1.4571 316SS Cold Drawn Seamless Tube to A
hardness is 85 HRB.

FOR METRIC STAINLESS STEEL TUBE FIT
STAINLESS STEEL CATALOGUE.

LUBRICATION DURING ASSEMBLY
The proper lubrication of components during as
oils for carbon steel fittings. An anti-seizing co
absolute must for assembly of stainless steel fi

Part No. Descr

ASP-120G EXMA
ASP-250G EXMA

PH: 0800 FITTI

CK / GREYSCALE VERSION

F FLUIDEXCELFLEitNtiCnEgsIN SERVICE

essary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:

:
- Pantone Black

BLY INSTRUCTIONS- Cool Grey 10

K:

Black RGB:
functioCMn::00 100% if aRRs:ed7s5 embleBRl:da0ckcorrectly. Over the
ch withKY:: 10t0h0 e inner pBGa:: 77r55t of thGBe:: 00body of the fitting. If
h the tube without indenting it and would cause

g tube alignment or to be a support for the tube.
stress has to be fixed by Tube Clamps (Section

vibration that could cause premature failure of

ect performance of the Tube Fitting. Use of tube
may seriously impair the efficiency of the fitting
manufacturer. Use the following tube only: ST
ction E of this catalogue). Maximum permissible

an 10mm must be pre-assembled with hardened
er to oil the thread, nut and ring. Once the ring
nstructions on the next page, undo the nut from
embly onto the desired stud body, tee, elbow etc

rrect performance of the Tube Fitting. Use of
ndard may seriously impair the efficiency of the
tting manufacturer. Use the following tube only:
ASTM A269 (Section D). Maximum permissible


TTING ASSEMBLY PLEASE ASK FOR THE

ssembly is essential! We advise to use mineral
ompound (EXMAR ANTI-SEIZE PASTE) is an
fittings.

ription

AR Anti Seize Paste - 120 gram bottle
AR Anti Seize Paste - 250 gram tin

INGS 24 HOURS. B38

BLAC

FHIGH QUALITY PRODUCTS

If nece
Spot:
Black
Grey -
CMYK
Grey

ASSEMBLY INSTRUCTIONS ACCORDING TO DINMC3::008

Y: 0

1. Before pre-assembly, make sure that all the tools tKo: 7b0
inefficient tools.

2. The segment of tube to be pre-assembled must have
(length H). Roundness must comply with the DIN 239

3. Cut the tube square by using an appropriate hack-saw
cut is properly made at 90 deg. Remove any internal a

4. Oil the 24 deg. cone, the thread of the body, the cuttin
5. Fit the nut and the cutting ring on the tube as shown.

nut.
6. Insert the tube on the 24 deg. cone until it comes into

cutting ring rests firmly on the nut. Then tighten the nu
contact with the tube and prevents rotation of this.
7. Holding the tube against its stop and making sure it do
the cutting edge of the nut cuts into the outer part of th
front of its cutting edge while the second cutting edge
8. Loosen the nut and check that there is a clearly raised
of the front of the cutting ring. This check is peremptor
not satisfactory, pre-assembly must be repeated.
9. If pre-assembly has been carried out correctly, fit the t
resistance is encountered and then tighten for a furthe
10. All the pre-assembly of stainless steel fittings must b

machines).

PH: 0800 FITTI

CK / GREYSCALE VERSION

F FLUIDEXCELFLEitNtiCnEgsIN SERVICE

essary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:

:
- Pantone Black
- Cool Grey 10

K:

Black RGB:
859-2 FMCO:: 0R0 B3
Red Black
R: 75 R: 0

Y: 0 G: 75 G: 0

be usedK:a1r0e0 in perfectB:w75orking oBr: d0 er. Replace any

a straight section at least twice the length of the nut
91.
w (do not use roller type tube cutters). Check that the
and external burrs.
ng ring and the nut with suitable products.

The larger diameter of the cutting ring must face the

contact with the stop. Tighten the nut by hand until the
ut with a wrench until the cutting edge of the ring is in

oes not rotate, tighten the nut by 3/4 of a turn. This way,
he tube for the necessary depth and raises an edge in
e clinches the tube at the same time.
d edge all around the tube. The edge must cover 80%
ry for the safety of all concerned! If the raised edge is

tube on the machine, close with a wrench until a certain
er 1/4 turn with a wrench to wrench contrast.
be performed with pre-assembly tool (blocks or

INGS 24 HOURS. B39





BLAC

FHIGH QUALITY PRODUCTS

If nece

Spot:
Black
Grey -

SECTION C - METRIC HYDCRMYK
Grey
VISUALC: 0
M: 0
Y: 0
K: 70

Metric Por

METRIC DOWTY SEAL METRIC PORT X METRIC PO
(DS-M...) C2 ADAPTOR (A6161...)

BSPT X METRIC PORTADAPTOR JIC X METRIC PORT ADAPTO

(A2261...) C3 (A5061...)

METRIC FEMALE HighPressure METRIC Adj X JIC 90 ELBOW

Socket (A7575...) C5 (B8350...)

PH: 0800 FITTI

CK / GREYSCALE VERSION

F FLUIDEXCELFLEitNtiCnEgsIN SERVICE

essary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:

:

- Pantone Black

- Cool Grey 10

RKA: ULIC ADAPTOR FITTINGS
Black RGB:

L INDEXC: 0 Red Black
M: 0 R: 75 R: 0
Y: 0 G: 75 G: 0

K: 100 B: 75 B: 0

rt Fittings

ORT BSPP X METRIC PORTADAPTOR

C2 (A1061...) C3

OR ORFS X METRIC PORT ADAPTOR

C4 (A8861..) C4

METRIC Plug Allen Key Hex

C5 Capt Seal (P-VSM...) C6

C1

INGS 24 HOURS.

METRIC DOWTY SEAL

A

Part No DIMENSION A
(MM ID)
DS-M08 8
DS-M10 10
DS-M12 12
DS-M14 14
DS-M16 16
DS-M18 18
DS-M20 20
DS-M22 22
DS-M24 24
DS-M26 26
DS-M27 27
DS-M30 30
DS-M33 33
DS-M42 42
DS-M48 48

METRIC PORT X METRIC PORT
ADAPTOR

A B

Part No Thread A Thread B
(METRIC (METRIC
A61611010 PORT) PORT)
A61611212 M10X1.0 M10X1.0
A61611214 M12X1.5 M12X1.5
A61611414 M12X1.5 M14X1.5
A61611416 M14X1.5 M14X1.5
A61611418 M14X1.5 M16X1.5
A61611422 M14X1.5 M18X1.5
A61611616 M14X1.5 M22X1.5
A61611618 M16X1.5 M16X1.5
A61611620 M16X1.5 M18X1.5
A61611622 M16X1.5 M20X1.5
A61611818 M16X1.5 M22X1.5
A61611820 M18X1.5 M18X1.5
A61612020 M18X1.5 M20X1.5
A61612022 M20X1.5 M20X1.5
A61612222 M20X1.5 M22X1.5
A61612226 M22X1.5 M22X1.5
A61612626 M22X1.5 M26X1.5
A61612630 M26X1.5 M26X1.5
A61613030 M26X1.5 M30X1.5
A61613038 M30X1.5 M30X1.5
A61613838 M30X1.5 M38X1.5
A61613845 M38X1.5 M38X1.5
A61614545 M38X1.5 M45X1.5
M45X1.5 M45X1.5

C2

BSPP X METRIC PORT ADAPTOR

AB

Part No Thread A Thread B
(BSPP) (METRIC
A10610210 PORT)
A10610214 1/8” M10X1.0
A10610410 1/8” M14X1.5
A10610412 1/4” M10X1.0
A10610414 1/4” M12X1.5
A10610610 1/4” M14X1.5
A10610612 3/8” M10X1.0
A10610614 3/8” M12X1.5
A10610616 3/8” M14X1.5
A10610618 3/8” M16X1.5
A10610622 3/8” M18X1.5
A10610814 3/8” M22X1.5
A10610816 1/2” M14X1.5
A10610818 1/2” M16X1.5
A10610820 1/2” M18X1.5
A10610822 1/2” M20X1.5
A10611218 1/2” M22X1.5
A10611220 3/4” M18X1.5
A10611222 3/4” M20X1.5
A10611226 3/4” M22X1.5
A10611230 3/4” M26X1.5
A10611626 3/4” M30X1.5
A10611630 1” M26X1.5
A10611638 1” M30X1.5
A10612030 1” M38X1.5
A10612038 1.1/4” M30X1.5
A10612438 1.1/4” M38X1.5
A10612445 1.1/2” M38X1.5
A10613245 1.1/2” M45X1.5
2” M45X1.5

BSPT X METRIC PORT ADAPTOR

AB

Part No Thread A Thread B
(BSPT) (METRIC
A22610410 PORT)
A22610412 1/4” M10X1.0
A22610414 1/4” M12X1.5
A22610416 1/4” M14X1.5
A22610418 1/4” M16X1.5
A22610420 1/4” M18X1.5
A22610612 1/4” M20X1.5
A22610614 3/8” M12X1.5
A22610616 3/8” M14X1.5
A22610618 3/8” M16X1.5
A22610620 3/8” M18X1.5
A22610622 3/8” M20X1.5
A22610626 3/8” M22X1.5
A22610816 3/8” M26X1.5
A22610818 1/2” M16X1.5
A22610820 1/2” M18X1.5
A22610822 1/2” M20X1.5
A22610826 1/2” M22X1.5
A22610827 1/2” M26X1.5
A22610833 1/2” M27X2.0
A22611226 1/2” M33X2.0
A22611227 3/4” M26X1.5
A22611233 3/4” M27X2.0
A22611242 3/4” M33X2.0
A22611633 3/4” M42X2.0
A22611642 1” M33X2.0
A22611648 1” M42X2.0
A22612042 1” M48X2.0
A22612448 1.1/4” M42X2.0
1.1/2” M48X2.0

C3

JIC X METRIC PORT ADAPTOR

AB

Part No Thread A Thread B
(JIC) (METRIC PORT)
A50610710 7/16” M10X1.0
A50610712 7/16” M12X1.5
A50610810 1/2” M10X1.0
A50610812 1/2” M12X1.5
A50610814 1/2” M14X1.5
A50610912 9/16” M12X1.5
A50610914 9/16” M14X1.5
A50610916 9/16” M16X1.5
A50610918 9/16” M18X1.5
A50611214 3/4” M14X1.5
A50611216 3/4” M16X1.5
A50611218 3/4” M18X1.5
A50611220 3/4” M20X1.5
A50611222 3/4” M22X1.5
A50611418 7/8” M18X1.5
A50611420 7/8” M20X1.5
A50611422 7/8” M22X1.5
A50611720 1.1/16” M20X1.5
A50611722 1.1/16” M22X1.5
A50611724 1.1/16” M24X1.5
A50611727 1.1/16” M27X2.0
A50611730 1.1/16” M30X2.0
A50612126 1.5/16” M26X1.5
A50612127 1.5/16” M27X2.0
A50612133 1.5/16” M33X2.0
A50612642 1.5/8” M42X2.0
A50613048 1.7/8” M48X2.0

ORFS X METRIC PORT ADAPTOR

AB

Part No Thread A Thread B
(ORFS) (METRIC PORT)
A88610910 9/16” M10X1.0
A88610912 9/16” M12X1.5
A88610914 9/16” M14X1.5
A88611112 11/16” M12X1.5
A88611114 11/16” M14X1.5
A88611116 11/16” M16X1.5
A88611118 11/16” M18X1.5
A88611314 13/16” M14X1.5
A88611316 13/16” M16X1.5
A88611318 13/16” M18X1.5
A88611322 13/16” M22X1.5
A88611618 1” M18X1.5
A88611622 1” M22X1.5
A88611627 1” M27X2.0
A88611922 1.3/16” M22X1.5
A88611927 1.3/16” M27X2.0
A88611933 1.3/16” M33X2.0
A88612327 1.7/16” M27X2.0
A88612333 1.7/16” M33X2.0
A88612342 1.7/16” M42X2.0
A88612733 1.11/16” M33X2.0
A88612742 1.11/16” M42X2.0
A88612748 1.11/16” M48X2.0
A88613248 2” M48X2.0

C4

METRIC FEMALE HIGH PRESSUR
SOCKET

AB

Part No Thread A Thread B
(METRIC PORT (METRIC PORT
A75751010 FEMALE) FEMALE)
A75751414 M10X1.0 M10X1.0
A75751616 M14X1.5 M14X1.5
A75752222 M16X1.5 M16X1.5
A75752727 M22X1.5 M22X1.5
A75753333 M27X2.0 M27X2.0
A75754242 M33X2.0 M33X2.0
A75754848 M42X2.0 M42X2.0
M48X2.0 M48X2.0

RE METRIC ADJUSTABLE X JIC 90
ELBOW

B

A Thread A Thread B

Part No (METRIC PORT Adj) (JIC)

B83501007 M10X1.0 7/16”
B83501008
B83501207 M10X1.0 1/2”
B83501208
B83501408 M12X1.5 7/16”
B83501409
B83501609 M12X1.5 1/2”
B83501612
B83501812 M14X1.5 1/2”
B83501814
B83502014 M14X1.5 9/16”
B83502214
B83502217 M16X1.5 9/16”
B83502717
B83502721 M16X1.5 3/4”
B83503321
B83504226 M18X1.5 3/4”
B83504830
M18X1.5 7/8”

M20X1.5 7/8”

M22X1.5 7/8”

M22X1.5 1.1/16”

M27X2.0 1.1/16”

M27X2.0 1.5/16”

M33X2.0 1.5/16”

M42X2.0 1.5/8”

M48X2.0 1.7/8”

C5

METRIC ALLEN KEY CAPTIVE SEA
PLUG

A

Part No Thread A
(METRIC PORT)
P-VSM10X1.0-WD M10X1.0
P-VSM12X1.5-WD M12X1.5
P-VSM14X1.5-WD M14X1.5
P-VSM16X1.5-WD M16X1.5
P-VSM18X1.5-WD M18X1.5
P-VSM20X1.5-WD M20X1.5
P-VSM22X1.5-WD M22X1.5
P-VSM26X1.5-WD M26X1.5
P-VSM27X2.0-WD M27X2.0
P-VSM33X2.0-WD M33X2.0
P-VSM42X2.0-WD M42X2.0
P-VSM48X2.0-WD M48X2.0

AL
C6

BLAC

FHIGH QUALITY PRODUCTS

If nece

SECTION - Spot:
D TWOBlack
Grey -

HOSE FITTINGCMYK
Grey
C: 0

M: 0

Y: 0

K: 70

BSPP HOSE TAIL BSPT HOSE TAIL D4
(A0210...) D4 (A0222...)

BSPPFS 45° SWEPT HOSE TAIL BSPPFS 90° SWEPT HOSE TAIL

(J0217...) D5 (G0217...) D5

NPT HOSE TAIL JIC HOSE TAIL D6
(A0234...) D6 (A0250...)

JICFSV 45° SWEPT HOSE TAIL JICFSV 90° SWEPT HOSE TAIL

(J0253...) D7 (G0253...) D7

ORFS HOSE TAIL ORFSFS HOSE TAIL D8
(A0288...) D8 (A0289...)

PH: 0800 FITTI

CK / GREYSCALE VERSION

F FLUIDEXCELFLEitNtiCnEgsIN SERVICE

essary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:

:
- Pantone Black

O PIECE SWAGE- Cool Grey 10

K: INRDGB:EX

VISUALBlack
C: 0 Red Black

M: 0 R: 75 R: 0

Y: 0 G: 75 G: 0

K: 100 B: 75 B: 0

BSPPFS HOSE TAIL D5
(A0217...)

JICFSV HOSE TAIL D6
(A0253...)

ORFSFS 45° SWEPT HOSE

TAIL (J0289...) D8

D1

INGS 24 HOURS.

BLAC

FHIGH QUALITY PRODUCTS

If nece

SECTION D - Spot:
TWOBlack
Grey -

HOSE FITTINGCMYK
Grey
C: 0

M: 0

Y: 0

K: 70

ORFSFS 90° SWEPT HOSE TAIL CODE 61 HOSE TAIL

(G0289...) D8 (A0238...) D9

CODE 61 90° SWEPT HOSE TAIL METRIC STAND PIPE HOSE

(G0238...) D9 TAIL (A0279...) D10

METRIC STAND PIPE 90° METRIC LIGHT HOSE TAIL

SWEPT HOSE TAIL (G0279...) D10 (A0265...) D11

METRIC LIGHT FS 45° SWEPT METRIC LIGHT FS 90° SWEPT

HOSE TAIL (J0267...) D11 HOSE TAIL (G0267...) D11

METRIC HEAVY FS HOSE TAIL METRIC HEAVY FS 45° SWEPT

(A0270...) D12 HOSE TAIL (J0270...) D12

PH: 0800 FITTI

CK / GREYSCALE VERSION

F FLUIDEXCELFLEitNtiCnEgsIN SERVICE

essary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:

:
- Pantone Black

O PIECE SWAGE- Cool Grey 10

K: INRDGB:EX

VISUALBlack
C: 0 Red Black

M: 0 R: 75 R: 0

Y: 0 G: 75 G: 0

K: 100 B: 75 B: 0

CODE 61 45° SWEPT HOSE TAIL

(J0238...) D9

METRIC STAND PIPE 45°
SWEPT HOSE TAIL (J0279...) D10

METRIC LIGHT FS HOSE TAIL

(A0267...) D11

METRIC HEAVY HOSE TAIL

(A0268...) D12

METRIC HEAVY FS 90° SWEPT

HOSE TAIL (G0270...) D12

D2

INGS 24 HOURS.

BLAC

FHIGH QUALITY PRODUCTS

If nece

Spot:
SECTION D - TWOBlack
Grey -

HOSE FITTINGCMYK
Grey
C: 0

M: 0

Y: 0

K: 70

CODE 61 FLANGE CODE 62 FLANGE D13
(FL61S38...) D13 (FL62S39...)

ONE WIRE SKIVE FERRULE TWO WIRE NON SKIVE
(SS1..) D14 FERRULE (SN2...)
D14

R7 NON SKIVE FERRULE

(SN7...) D14

PH: 0800 FITTI

CK / GREYSCALE VERSION

F FLUIDEXCELFLEitNtiCnEgsIN SERVICE

essary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:

:
- Pantone Black

O PIECE SWAGE- Cool Grey 10

K: INRDGB:EX

VISUALBlack
C: 0 Red Black

M: 0 R: 75 R: 0

Y: 0 G: 75 G: 0

K: 100 B: 75 B: 0

ONE WIRE NON SKIVE

FERRULE (SN1..) D14

TWO WIRE SKIVE FERRULE

(SS2...) D14

D3

INGS 24 HOURS.

BSPP MALE X SWAGE TAIL

AB

Part No THREAD A HOSE TAIL B
(BSPP) (“)
A02100302-2 1/8” 3/16”
A02100304-2 1/4” 3/16”
A02100402-2 1/8” 1/4”
A02100404-2 1/4” 1/4”
A02100406-2 3/8” 1/4”
A02100504-2 1/4” 5/16”
A02100506-2 3/8” 5/16”
A02100604-2 1/4” 3/8”
A02100606-2 3/8” 3/8”
A02100608-2 1/2” 3/8”
A02100806-2 3/8” 1/2”
A02100808-2 1/2” 1/2”
A02100812-2 3/4” 1/2”
A02101012-2 3/4” 5/8”
A02101212-2 3/4” 3/4”
A02101216-2 1” 3/4”
A02101616-2 1” 1”
A02101620-2 1.1/4” 1”
A02102020-2 1.1/4” 1.1/4”
A02102424-2 1.1/2” 1.1/2”
A02103232-2 2” 2”

PH: 0800 FITTI

BSPT MALE X SWAGE TAIL

AB

Part No THREAD A HOSE TAIL B
(BSPT) (“)
A02220302-2 1/8” 3/16”
A02220304-2 1/4” 3/16”
A02220402-2 1/8” 1/4”
A02220404-2 1/4” 1/4”
A02220406-2 3/8” 1/4”
A02220504-2 1/4” 5/16”
A02220506-2 3/8” 5/16”
A02220606-2 3/8” 3/8”
A02220608-2 1/2” 3/8”
A02220806-2 3/8” 1/2”
A02220808-2 1/2” 1/2”
A02221012-2 3/4” 5/8”
A02221212-2 3/4” 3/4”
A02221216-2 1” 3/4”
A02221616-2 1” 1”
A02221620-2 1.1/4” 1”
A02222020-2 1.1/4” 1.1/4”
A02222424-2 1.1/2” 1.1/2”
A02223232-2 2” 2”

D4

INGS 24 HOURS.

BSPP FEMALE SWIVEL X SWAGE TAIL

AB

Part No THREAD A HOSE TAIL B

(BSPPFS) (“)

A02170302-2 1/8” 3/16”

A02170304-2 1/4” 3/16”

A02170402-2 1/8” 1/4”

A02170404-2 1/4” 1/4”

A02170406-2 3/8” 1/4”

A02170504-2 1/4” 5/16”

A02170506-2 3/8” 5/16”

A02170604-2 1/4” 3/8”

A02170606-2 3/8” 3/8”

A02170608-2 1/2” 3/8”

A02170806-2 3/8” 1/2”

A02170808-2 1/2” 1/2”

A02170812-2 3/4” 1/2”

A02171012-2 3/4” 5/8”

A02171212-2 3/4” 3/4”

A02171216-2 1” 3/4”

A02171616-2 1” 1”

A02171620-2 1.1/4” 1”

A02172020-2 1.1/4” 1.1/4”

A02172024-2 1.1/2” 1.1/4”

A02172424-2 1.1/2” 1.1/2”

A02173232-2 2” 2”

BSPP FEMALE SWIVEL X 45 SWEPT
SWAGE TAIL

A

B

Part No THREAD A HOSE TAIL B
(BSPPFS) (“)
J02170302-2 1/8” 3/16”
J02170304-2 1/4” 3/16”
J02170404-2 1/4” 1/4”
J02170504-2 1/4” 5/16”
J02170506-2 3/8” 5/16”
J02170606-2 3/8” 3/8”
J02170808-2 1/2” 1/2”
J02171012-2 3/4” 5/8”
J02171212-2 3/4” 3/4”
J02171616-2 1” 1”
J02172020-2 1.1/4” 1.1/4”
J02172424-2 1.1/2” 1.1/2”
J02173232-2 2” 2”

PH: 0800 FITTI

BSPP FEMALE SWIVEL X 90 SWEPT
SWAGE TAIL

A

Part No B HOSE TAIL B
(“)
G02170302-2 THREAD A 3/16”
G02170304-2 (BSPPFS) 3/16”
G02170404-2 1/8” 1/4”
G02170504-2 1/4” 5/16”
G02170506-2 1/4” 5/16”
G02170606-2 1/4” 3/8”
G02170808-2 3/8” 1/2”
G02171012-2 3/8” 5/8”
G02171212-2 1/2” 3/4”
G02171616-2 3/4” 1”
G02172020-2 3/4” 1.1/4”
G02172424-2 1” 1.1/2”
G02173232-2 1.1/4” 2”
1.1/2”
2”

D5

INGS 24 HOURS.

NPT MALE X SWAGE TAIL

AB

Part No THREAD A HOSE TAIL B

(NPT) (“)

A02340302-2 1/8” 3/16”

A02340402-2 1/8” 1/4”

A02340404-2 1/4” 1/4”

A02340406-2 3/8” 1/4”

A02340504-2 1/4” 5/16”

A02340606-2 3/8” 3/8”

A02340608-2 1/2” 3/8”

A02340806-2 3/8” 1/2”

A02340808-2 1/2” 1/2”

A02341012-2 3/4” 5/8”

A02341212-2 3/4” 3/4”

A02341216-2 1” 3/4”

A02341616-2 1” 1”

A02341620-2 1.1/4” 1”

A02342020-2 1.1/4” 1.1/4”

A02342424-2 1.1/2” 1.1/2”

A02343232-2 2” 2”

JIC MALE X SWAGE TAIL

AB

Part No THREAD A HOSE TAIL B
(JIC) (“)
A02500307-2 7/16” 3/16”
A02500308-2 1/2” 3/16”
A02500407-2 7/16” 1/4”
A02500408-2 1/2” 1/4”
A02500409-2 9/16” 1/4”
A02500509-2 9/16” 5/16”
A02500609-2 9/16” 3/8”
A02500612-2 3/4” 3/8”
A02500614-2 7/8” 3/8”
A02500812-2 3/4” 1/2”
A02500814-2 7/8” 1/2”
A02500817-2 1.1/16” 1/2”
A02501014-2 7/8” 5/8”
A02501017-2 1.1/16” 5/8”
A02501217-2 1.1/16” 3/4”
A02501221-2 1.5/16” 3/4”
A02501621-2 1.5/16” 1”
A02502026-2 1.5/8” 1.1/4”
A02502430-2 1.7/8” 1.1/2”
A02503240-2 2.1/2” 2”

PH: 0800 FITTI

JIC FEMALE SWIVEL X SWAGE TAIL

AB

Part No THREAD A HOSE TAIL B
(JICFS) (“)
A02530307-2 7/16” 3/16”
A02530308-2 1/2” 3/16”
A02530407-2 7/16” 1/4”
A02530408-2 1/2” 1/4”
A02530409-2 9/16” 1/4”
A02530509-2 9/16” 5/16”
A02530609-2 9/16” 3/8”
A02530612-2 3/4” 3/8”
A02530614-2 7/8” 3/8”
A02530812-2 3/4” 1/2”
A02530814-2 7/8” 1/2”
A02530817-2 1.1/16” 1/2”
A02531014-2 7/8” 5/8”
A02531017-2 1.1/16” 5/8”
A02531217-2 1.1/16” 3/4”
A02531221-2 1.5/16” 3/4”
A02531621-2 1.5/16” 1”
A02531626-2 1.5/8” 1”
A02532026-2 1.5/8” 1.1/4”
A02532030-2 1.7/8” 1.1/4”
A02532430-2 1.7/8” 1.1/2”
A02533240-2 2.1/2” 2”

D6

INGS 24 HOURS.

JIC FEMALE SWIVEL X 45 SWEPT
SWAGE TAIL

A

B

Part No THREAD A HOSE TAIL B
(JICFS) (“)
J02530307-2 7/16” 3/16”
J02530308-2 1/2” 3/16”
J02530407-2 7/16” 1/4”
J02530408-2 1/2” 1/4”
J02530409-2 9/16” 1/4”
J02530509-2 9/16” 5/16”
J02530609-2 9/16” 3/8”
J02530612-2 3/4” 3/8”
J02530614-2 7/8” 3/8”
J02530812-2 3/4” 1/2”
J02530814-2 7/8” 1/2”
J02530817-2 1.1/16” 1/2”
J02531014-2 7/8” 5/8”
J02531017-2 1.1/16” 5/8”
J02531217-2 1.1/16” 3/4”
J02531221-2 1.5/16” 3/4”
J02531621-2 1.5/16” 1”
J02531626-2 1.5/8” 1”
J02532026-2 1.5/8” 1.1/4”
J02532030-2 1.7/8” 1.1/4”
J02532430-2 1.7/8” 1.1/2”
J02533240-2 2.1/2” 2”

PH: 0800 FITTI

JIC FEMALE SWIVEL X 90 SWEPT
SWAGE TAIL

A

B

Part No THREAD A HOSE TAIL B
(JICFS) (“)
G02530307-2 7/16” 3/16”
G02530308-2 1/2” 3/16”
G02530407-2 7/16” 1/4”
G02530408-2 1/2” 1/4”
G02530409-2 9/16” 1/4”
G02530509-2 9/16” 5/16”
G02530609-2 9/16” 3/8”
G02530612-2 3/4” 3/8”
G02530614-2 7/8” 3/8”
G02530812-2 3/4” 1/2”
G02530814-2 7/8” 1/2”
G02530817-2 1.1/16” 1/2”
G02531014-2 7/8” 5/8”
G02531017-2 1.1/16” 5/8”
G02531217-2 1.1/16” 3/4”
G02531221-2 1.5/16” 3/4”
G02531621-2 1.5/16” 1”
G02531626-2 1.5/8” 1”
G02532026-2 1.5/8” 1.1/4”
G02532030-2 1.7/8” 1.1/4”
G02532430-2 1.7/8” 1.1/2”
G02533240-2 2.1/2” 2”

D7

INGS 24 HOURS.

ORFS MALE X SWAGE TAIL

AB

Part No THREAD A HOSE TAIL B
(ORFS) (“)
A02880409-2 9/16” 1/4”
A02880411-2 11/16” 1/4”
A02880511-2 11/16” 5/16”
A02880611-2 11/16” 3/8”
A02880613-2 13/16” 3/8”
A02880813-2 13/16” 1/2”
A02880816-2 1” 1/2”
A02880819-2 1.3/16” 1/2”
A02881016-2 1” 5/8”
A02881019-2 1.3/16” 5/8”
A02881219-2 1.3/16” 3/4”
A02881223-2 1.7/16” 3/4”
A02881623-2 1.7/16” 1”
A02882027-2 1.11/16” 1.1/4”
A02882432-2 2” 1.1/2”

ORFS FEMALE SWIVEL X SWAGE TAIL

AB

Part No THREAD A HOSE TAIL B
(ORFSFS) (“)
A02890409-2 9/16” 1/4”
A02890411-2 11/16” 1/4”
A02890511-2 11/16” 5/16”
A02890611-2 11/16” 3/8”
A02890613-2 13/16” 3/8”
A02890813-2 13/16” 1/2”
A02890816-2 1” 1/2”
A02890819-2 1.3/16” 1/2”
A02891016-2 1” 5/8”
A02891019-2 1.3/16” 5/8”
A02891219-2 1.3/16” 3/4”
A02891223-2 1.7/16” 3/4”
A02891623-2 1.7/16” 1”
A02892027-2 1.11/16” 1.1/4”
A02892432-2 2” 1.1/2”

PH: 0800 FITTI

ORFS FEMALE SWIVEL X 45 SWEPT
TAIL

A

B

Part No THREAD A HOSE TAIL B
(ORFSFS) (“)
J02890409-2 9/16” 1/4”
J02890411-2 11/16” 1/4”
J02890511-2 11/16” 5/16”
J02890611-2 11/16” 3/8”
J02890613-2 13/16” 3/8”
J02890813-2 13/16” 1/2”
J02890816-2 1” 1/2”
J02890819-2 1.3/16” 1/2”
J02891016-2 1” 5/8”
J02891019-2 1.3/16” 5/8”
J02891219-2 1.3/16” 3/4”
J02891223-2 1.7/16” 3/4”
J02891623-2 1.7/16” 1”
J02892027-2 1.11/16” 1.1/4”
J02892432-2 2” 1.1/2”

ORFS FEMALE SWIVEL X 90 SWEPT
TAIL

A

B

Part No THREAD A HOSE TAIL B
(ORFSFS) (“)
G02890409-2 9/16” 1/4”
G02890411-2 11/16” 1/4”
G02890511-2 11/16” 5/16”
G02890611-2 11/16” 3/8”
G02890613-2 13/16” 3/8”
G02890813-2 13/16” 1/2”
G02890816-2 1” 1/2”
G02890819-2 1.3/16” 1/2”
G02891016-2 1” 5/8”
G02891019-2 1.3/16” 5/8”
G02891219-2 1.3/16” 3/4”
G02891223-2 1.7/16” 3/4”
G02891623-2 1.7/16” 1”
G02892027-2 1.11/16” 1.1/4”
G02892432-2 2” 1.1/2”

INGS 24 HOURS. D8

CODE 61 X SWAGE TAIL

AB

Part No END A HOSE TAIL B
(CODE 61”) (“)
A02380808-2 1/2” 1/2”
A02380812-2 3/4” 1/2”
A02381012-2 3/4” 5/8”
A02381212-2 3/4” 3/4”
A02381216-2 1” 3/4”
A02381616-2 1” 1”
A02381620-2 1.1/4” 1”
A02382020-2 1.1/4” 1.1/4”
A02382024-2 1.1/2” 1.1/4”
A02382424-2 1.1/2” 1.1/2”
A02382432-2 2” 1.1/2”
A02383232-2 2” 2”

CODE 61 X 45 SWEPT TAIL

A

B

Part No END A HOSE TAIL B
(CODE 61”) (“)
J02380808-2 1/2” 1/2”
J02380812-2 3/4” 1/2”
J02381012-2 3/4” 5/8”
J02381212-2 3/4” 3/4”
J02381216-2 1” 3/4”
J02381616-2 1” 1”
J02381620-2 1.1/4” 1”
J02382020-2 1.1/4” 1.1/4”
J02382024-2 1.1/2” 1.1/4”
J02382424-2 1.1/2” 1.1/2”
J02382432-2 2” 1.1/2”
J02383232-2 2” 2”

PH: 0800 FITTI

CODE 61 X 90 SWEPT TAIL

A

Part No B HOSE TAIL B
(“)
G02380808-2 END A 1/2”
G02380812-2 (CODE 61”) 1/2”
G02381012-2 1/2” 5/8”
G02381212-2 3/4” 3/4”
G02381216-2 3/4” 3/4”
G02381616-2 3/4” 1”
G02381620-2 1” 1”
G02382020-2 1” 1.1/4”
G02382024-2 1.1/4” 1.1/4”
G02382424-2 1.1/4” 1.1/2”
G02382432-2 1.1/2” 1.1/2”
G02383232-2 1.1/2” 2”
2”
2”

D9

INGS 24 HOURS.

METRIC STAND PIPE X SWAGE TAIL M

AB A

Part No CONNECTION A HOSE TAIL B P
(MM) (“)
A02790306-2 6 3/16” J
A02790308-2 8 3/16” J
A02790406-2 6 1/4” J
A02790408-2 8 1/4” J
A02790410-2 10 1/4” J
A02790412-2 12 1/4” J
A02790510-2 10 5/16” J
A02790512-2 12 5/16” J
A02790610-2 10 3/8”
A02790612-2 12 3/8” M
A02790614-2 14 3/8”
A02790615-2 15 3/8” A
A02790814-2 14 1/2”
A02790815-2 15 1/2” P
A02790816-2 16 1/2”
A02790818-2 18 1/2” G
A02791018-2 18 5/8” G
A02791020-2 20 5/8” G
A02791220-2 20 3/4” G
A02791222-2 22 3/4” G
A02791225-2 25 3/4” G
A02791625-2 25 1” G
A02791628-2 28 1” G
A02791630-2 30 1”
A02792035-2 35 1.1/4”
A02792038-2 38 1.1/4”
A02792438-2 38 1.1/2”
A02792442-2 42 1.1/2”

PH: 0800 FITTI

METRIC STAND PIPE X 45 SWEPT TAIL

A

B

Part No CONNECTION A HOSE TAIL B
(MM) (“)
J02790306-2 6 3/16”
J02790308-2 8 3/16”
J02790406-2 6 1/4”
J02790510-2 10 5/16”
J02790512-2 12 5/16”
J02791018-2 18 5/8”
J02791020-2 20 5/8”
J02792438-2 38 1.1/2”

METRIC STAND PIPE X 90 SWEPT TAIL

A

B

Part No CONNECTION A HOSE TAIL B
(MM) (“)
G02790306-2 6 3/16”
G02790308-2 8 3/16”
G02790406-2 6 1/4”
G02790510-2 10 5/16”
G02790512-2 12 5/16”
G02791018-2 18 5/8”
G02791020-2 20 5/8”
G02792438-2 38 1.1/2”

D10

INGS 24 HOURS.

METRIC LIGHT (L) MALE X SWAGE T

AB

Part No THREAD A HOSE TAIL B
(METRIC L MALE) (“)
A02650414-2 M14X1.5 (8L) 1/4”
A02650416-2 M16X1.5 (10L) 1/4”
A02650418-2 M18X1.5 (12L) 1/4”
A02650618-2 M18X1.5 (12L) 3/8”
A02650622-2 M22X1.5 (15L) 3/8”
A02650822-2 M22X1.5 (15L) 1/2”
A02650826-2 M26X1.5 (18L) 1/2”
A02651230-2 M30X2.0 (22L) 3/4”
A02651636-2 M36X2.0 (28L) 1”
A02652045-2 M45X2.0 (35L) 1.1/4”
A02652452-2 M52X2.0 (42L) 1.1/2”

METRIC LIGHT (L) FEMALE SWIVEL
X SWAGE TAIL

AB

Part No THREAD A HOSE TAIL B
(METRIC L FS) (“)
A02670414-2 M14X1.5 (8L) 1/4”
A02670416-2 M16X1.5 (10L) 1/4”
A02670418-2 M18X1.5 (12L) 1/4”
A02670618-2 M18X1.5 (12L) 3/8”
A02670622-2 M22X1.5 (15L) 3/8”
A02670822-2 M22X1.5 (15L) 1/2”
A02670826-2 M26X1.5 (18L) 1/2”
A02671026-2 M26X1.5 (18L) 5/8”
A02671230-2 M30X2.0 (22L) 3/4”
A02671636-2 M36X2.0 (28L) 1”
A02672045-2 M45X2.0 (35L) 1.1/4”
A02672452-2 M52X2.0 (42L) 1.1/2”

PH: 0800 FITTI

TAIL METRIC LIGHT (L) FEMALE SWIVEL
X 45 SWEPT TAIL

A

B

Part No THREAD A HOSE TAIL B
(METRIC L FS) (“)
J02670414-2 M14X1.5 (8L) 1/4”
J02670416-2 M16X1.5 (10L) 1/4”
J02670418-2 M18X1.5 (12L) 1/4”
J02670618-2 M18X1.5 (12L) 3/8”
J02670622-2 M22X1.5 (15L) 3/8”
J02670822-2 M22X1.5 (15L) 1/2”
J02670826-2 M26X1.5 (18L) 1/2”
J02671230-2 M30X2.0 (22L) 3/4”
J02671636-2 M36X2.0 (28L) 1”
J02672045-2 M45X2.0 (35L) 1.1/4”
J02672452-2 M52X2.0 (42L) 1.1/2”

METRIC LIGHT (L) FEMALE SWIVEL X
90 SWEPT TAIL

A

B

Part No THREAD A HOSE TAIL B
(METRIC L FS) (“)
G02670414-2 M14X1.5 (8L) 1/4”
G02670416-2 M16X1.5 (10L) 1/4”
G02670418-2 M18X1.5 (12L) 1/4”
G02670618-2 M18X1.5 (12L) 3/8”
G02670622-2 M22X1.5 (15L) 3/8”
G02670822-2 M22X1.5 (15L) 1/2”
G02670826-2 M26X1.5 (18L) 1/2”
G02671026-2 M26X1.5 (18L) 5/8”
G02671230-2 M30X2.0 (22L) 3/4”
G02671636-2 M36X2.0 (28L) 1”
G02672045-2 M45X2.0 (35L) 1.1/4”
G02672452-2 M52X2.0 (42L) 1.1/2”

D11

INGS 24 HOURS.

METRIC HEAVY (S) MALE X
SWAGE TAIL

AB

Part No THREAD A HOSE TAIL B
(METRIC S MALE) (“)
A02680414-2 M14X1.5 (6S) 1/4”
A02680416-2 M16X1.5 (8S) 1/4”
A02680418-2 M18X1.5 (10S) 1/4”
A02680420-2 M20X1.5 (12S) 1/4”
A02680620-2 M20X1.5 (12S) 3/8”
A02680622-2 M22X1.5 (14S) 3/8”
A02680822-2 M22X1.5 (14S) 1/2”
A02680824-2 M24X1.5 (16S) 1/2”
A02681230-2 M30X2.0 (20S) 3/4”
A02681236-2 M36X2.0 (25S) 3/4”
A02681636-2 M36X2.0 (25S) 1”
A02681642-2 M42X2.0 (30S) 1”
A02682052-2 M52X2.0 (38S) 1.1/4”

METRIC HEAVY (S) FEMALE
SWIVEL X SWAGE TAIL

AB

Part No THREAD A HOSE TAIL B

A02700414-2 (METRIC S FS) (“)
A02700416-2
A02700418-2 M14X1.5 (6S) 1/4”
A02700420-2
A02700620-2 M16X1.5 (8S) 1/4”
A02700622-2
A02700822-2 M18X1.5 (10S) 1/4”
A02700824-2
A02701030-2 M20X1.5 (12S) 1/4”
A02701230-2
A02701236-2 M20X1.5 (12S) 3/8”
A02701636-2
A02701642-2 M22X1.5 (14S) 3/8”
A02702052-2
M22X1.5 (14S) 1/2”

M24X1.5 (16S) 1/2”

M30X2.0 (20S) 5/8”

M30X2.0 (20S) 3/4”

M36X2.0 (25S) 3/4”

M36X2.0 (25S) 1”

M42X2.0 (30S) 1”

M52X2.0 (38S) 1.1/4”

PH: 0800 FITTI

METRIC HEAVY (S) FEMALE
SWIVEL X 45 SWEPT TAIL

A

B

Part No THREAD A HOSE TAIL B

J02700414-2 (METRIC S FS) (“)
J02700416-2
J02700418-2 M14X1.5 (6S) 1/4”
J02700420-2
J02700620-2 M16X1.5 (8S) 1/4”
J02700622-2
J02700822-2 M18X1.5 (10S) 1/4”
J02700824-2
J02701230-2 M20X1.5 (12S) 1/4”
J02701236-2
J02701636-2 M20X1.5 (12S) 3/8”
J02701642-2
J02702052-2 M22X1.5 (14S) 3/8”

M22X1.5 (14S) 1/2”

M24X1.5 (16S) 1/2”

M30X2.0 (20S) 3/4”

M36X2.0 (25S) 3/4”

M36X2.0 (25S) 1”

M42X2.0 (30S) 1”

M52X2.0 (38S) 1.1/4”

METRIC HEAVY (S) FEMALE SWIVEL X
90 SWEPT TAIL

A

B

Part No THREAD A HOSE TAIL B

G02700414-2 (METRIC S FS) (“)
G02700416-2
G02700418-2 M14X1.5 (6S) 1/4”
G02700420-2
G02700620-2 M16X1.5 (8S) 1/4”
G02700622-2
G02700822-2 M18X1.5 (10S) 1/4”
G02700824-2
G02701030-2 M20X1.5 (12S) 1/4”
G02701230-2
G02701236-2 M20X1.5 (12S) 3/8”
G02701636-2
G02701642-2 M22X1.5 (14S) 3/8”
G02702052-2
M22X1.5 (14S) 1/2”

M24X1.5 (16S) 1/2”

M30X2.0 (20S) 5/8”

M30X2.1 (20S) 3/4”

M36X2.0 (25S) 3/4”

M36X2.0 (25S) 1”

M42X2.0 (30S) 1”

M52X2.0 (38S) 1.1/4”

D12

INGS 24 HOURS.

CODE 61 SPLIT FLANGE HALF

Part No CODE 61 FLANGE SIZE
(“)
FL61S3808 1/2”
FL61S3812 3/4”
FL61S3816 1”
FL61S3820 1.1/4”
FL61S3824 1.1/2”
FL61S3832 2”

NOTE: Sold individually, two pieces required per s

PH: 0800 FITTI

CODE 62 SPLIT FLANGE HALF

Part No CODE 62 FLANGE SIZE
(“)
FL62S3908 1/2”
FL62S3912 3/4”
FL62S3916 1”
FL62S3920 1.1/4”
FL62S3924 1.1/2”
FL62S3932 2”

set.

D13

INGS 24 HOURS.

SAE 100R1AT NON SKIVE FERRULE

Part No HOSE SIZE
(“)
SN103 3/16”
SN104 1/4”
SN105 5/16”
SN106 3/8”
SN108 1/2”
SN110 5/8”
SN112 3/4”
SN116 1”
SN120 1.1/4”
SN124 1.1/2”

SAE 100R1AT SKIVE FERRULE

Part No HOSE SIZE
SS132 (“)
2”

PH: 0800 FITTI