BHS_DKXN_1_00_M3_MANUAL

Pos QTY Part # ARTICLE SHORT DESCRIPTION 1 ARTICLE SHOR

1 5 507636500 CONICAL LUBR. HEAD
2 1 920001983 HOSE PIPE
3 1 920001116 HOSE PIPE
4 1 910815200 HOSE PIPE
5 1 920000906 HOSE PIPE
6 1 920000907 HOSE PIPE

END OF BOM!

SPARE PARTS LIST DKX 1,67

print: 30.07.2015 13:55:59 902023597

RT DESCRIPTION 2 DIM/TYPE MATERIAL STANDARD WEIGHT
5.8
AR1/4 DIN 71412 0,01
A0A2-1450 1,10
A0A0-1800 0,70
A0A0-850 0,30
A0A0-450 0,30
A0A3-1850 0,70

LUBRICATION PIPE AGS
SPARE PARTS DRAWING

page: 1

6

3

DKX 1,67

902023597 00

5 1
56

4

3
2

4
2

SCHMIERLEITUNG AGS

LUBRICATION PIPE AGS

01 A ERSATZTEILZEICHNUNG

SPARE PARTS DRAWING

Pos QTY Part # ARTICLE SHORT DESCRIPTION 1 ARTICLE SHOR

1 1 920008714 FILTER
2 1 504350400 HOSE NOZZLE
3 1 504326700 SCREW FITTING
4 1 504325101 SCREW FITTING
5 1 541501500 HOSE

END OF BOM!

SPARE PARTS LIST DKX

print: 30.07.2015 13:56:01 902024646

RT DESCRIPTION 2 DIM/TYPE MATERIAL STANDARD WEIGHT
G1/2Z
0,68
1200.000 MS 0,06
- 0,04
- 0,04

POLYURETH 0.0
AN

MAINTENANCE UNIT
SPARE PARTS DRAWING

page: 1

5
3
1

DKX

902024646 00

4
2

01 A WARTUNGSEINHEIT MIT LUFTLEITUNG

MAINTENANCE UNIT

ERSATZTEILZEICHNUNG

SPARE PARTS DRAWING

Pos QTY Part # ARTICLE SHORT DESCRIPTION 1 ARTICLE SHOR
4 X 10,8 CCM/H
1 1 920009599 GREASE PUMP
2 6,0 509531000 ANTIFRICT. BEARING GREASE
3 4 910795000 CONICAL LUBR. HEAD
4 1 541556000 HIGH-PRESSURE HOSE
5 2 920005043 HOSE PIPE 6
6 2 920000907 HOSE PIPE
7 4 910671500 HOSE SOCKET
8 8 910671600 SCREW SOCKET
9 4 920002589 HOSE SOCKET
10 1 900041000 ASSEMBLY INSTRUCTIONS
11 4 920010182 PUMP ELEMENT

END OF BOM!

SPARE PARTS LIST DKX 1,00

print: 30.07.2015 13:56:02 902024647

RT DESCRIPTION 2 DIM/TYPE MATERIAL STANDARD WEIGHT
H 4 LTR.
9,00
AR 1/4 ST/VERZ 180,00
16000.000 PUR/TER/SW 350BAR
A05A05-410 0,01
A0A3-1850 ST 0.0
D6 ST
D6 ST 0,30
D6 KUNSTSTOFF 0,70
8,6X2,3 0,03
4X 10,8 CCM/H 0,05
0,04

CENTRAL LUBRICATION
GREASE

SPARE PARTS DRAWING

page: 1

6
4,10 5

3

8 6
7 4,10

8 DKX 1,00

9 902024647 00

1,2

6
5 4,10

11

6

ZENTRALSCHMIERUNG FETT

CENTRAL LUBRICATION GREASE

01 A ERSATZTEILZEICHNUNG

SPARE PARTS DRAWING

Owner Manual BHS-900041000
2.2A-20001-D99
Operating Instructions

Plastic tubes and high-pressure plastic hoses

Plastic tube (Ø 6 x 1,5 mm)

• Use the platic tubes only in the low pressure area, i. e. bet-
ween the secondary metering devices and the lubrication
point.

• Adhere to the pressures and bending radiuses mentioned in
the chapter „Technical Data“ when installing the parts.

High-pressure plastic hoses Ø 8,6 x 2,3 mm

• Use the high-pressure plastic hose only in the high pressure
area, i. e. between the pump, main metering device and se-
condary metering devices.

• Adhere to the pressures and bending radiuses mentioned in
the chapter „Technical Data“ when installing the parts.

Fitting the threaded sleeves and hose studs on the high- pres-
sure plastic hose

1028a96 • Screw the threaded sleeve, item 1 Fig. 22, counterclockwise
onto the high-pressure plastic hose 2 until the illustrated di-
Fig. 22 - Preassembly of the threaded sleeves and hose studs on the high-pressu- mension of 11 mm is reached. Then screw the hose stud 3
re plstic hose into the threaded sleeve 1.

Important: Before screwing the parts 1 and 3, rub them with oil.

1 - Threaded sleeve Note : The outside diameter of the high-pressure plastic hose
2 - High- pressure plastic hose may show variations in dimension. In such a case, press the
3 - Hose stud threaded sleeve 1 at the end where it will be screwed onto the
high-pressure plastic hose so that it becomes oval in shape (1
to 2 mm). This will prevent the high-pressure plastic hose from
being pushed out of the sleeve when the hose stud is screwed.

Note: When using the special adjusting gauge 432-23077-1
(see Pats Catalog) screw the threaded sleeve counterclockwise
onto the high-pressure plastic hose until the gauge inserted in
the sleeve begins to rise.

Subject to modifications 1029a96

Fig. 23 - Preassembly of the threaded sleeves by means of an adjusting gauge
1 - Threaded sleeve
2 - High-pressure plastic hose
3 - Adjusting gauge 432-23077-1

Page A 14
LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259